882 lines
33 KiB
Plaintext
882 lines
33 KiB
Plaintext
-- Private MIB definition for Trango Systems
|
|
-- Access 58xx series wireless broadband Master Unit P5830S
|
|
-- Version: 1.0
|
|
-- Date: June 10, 2003
|
|
--
|
|
-- Copyright 2003: Trango Systems, Inc. All Rights Reserved.
|
|
-- Trango Systems, Inc. 15070 Avenue Of Science Suite 200 San Diego CA 92128 USA.
|
|
--
|
|
-- Reproduction of this document is authorized on condition that the
|
|
-- foregoing copyright notice is included.
|
|
|
|
TRANGOP5830S-MU-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- MIB module for enterprise trango wireless broadband
|
|
-- of management of P5830S master unit
|
|
|
|
IMPORTS
|
|
enterprises, IpAddress, Counter
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
-- textual conventions
|
|
|
|
DisplayString ::=
|
|
OCTET STRING
|
|
-- This data type is used to model textual information taken
|
|
-- from the NVT ASCII character set. By convention, objects
|
|
-- with this syntax are declared as having
|
|
--
|
|
-- SIZE (0..255)
|
|
|
|
|
|
-- trango wireless broadband MIB registration id assigned to 5454.
|
|
-- customer needs to change this value based on their OEM value.
|
|
trango OBJECT IDENTIFIER ::= { enterprises 5454 }
|
|
tbw OBJECT IDENTIFIER ::= { trango 1 }
|
|
p5830smu OBJECT IDENTIFIER ::= { tbw 22 }
|
|
|
|
-- modules branched from p5830smu
|
|
musys OBJECT IDENTIFIER ::= { p5830smu 1 }
|
|
murf OBJECT IDENTIFIER ::= { p5830smu 2 }
|
|
ru OBJECT IDENTIFIER ::= { p5830smu 3 }
|
|
trapconfig OBJECT IDENTIFIER ::= { p5830smu 4 }
|
|
mibinfo OBJECT IDENTIFIER ::= { p5830smu 5 }
|
|
|
|
muversion OBJECT IDENTIFIER ::= { musys 1 }
|
|
muswitches OBJECT IDENTIFIER ::= { musys 8}
|
|
mutraffic OBJECT IDENTIFIER ::= { musys 9}
|
|
muipconfig OBJECT IDENTIFIER ::= { musys 13}
|
|
murftable OBJECT IDENTIFIER ::= { murf 4 }
|
|
muism OBJECT IDENTIFIER ::= { murf 5 }
|
|
muunii OBJECT IDENTIFIER ::= { murf 6 }
|
|
|
|
-- MIB objects defined below
|
|
|
|
-- master unit system objects
|
|
muversionHW OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(2))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hardware version."
|
|
::= { muversion 1 }
|
|
|
|
muversionFW OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Main firmware version.
|
|
Format: <code version>H<hardware version>D<date>."
|
|
::= { muversion 2 }
|
|
|
|
muversionFPGA OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"FPGA firmware version."
|
|
::= { muversion 3 }
|
|
|
|
muversionFWChecksum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Master unit firmware checksum."
|
|
::= { muversion 4 }
|
|
|
|
muversionFPGAChecksum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Master unit FPGA checksum."
|
|
::= { muversion 5 }
|
|
|
|
musysDeviceId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Master unit device Id. Each master unit in a cluster shall have unique ID."
|
|
::= { musys 2 }
|
|
|
|
musysDefOpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(16),
|
|
off(0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The operation mode (on or off) the master unit is on after reboot/power cycle."
|
|
::= { musys 3 }
|
|
|
|
musysCurOpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(16),
|
|
off(0)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Master unit's current operation mode."
|
|
::= { musys 4 }
|
|
|
|
musysActivateOpmode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deactivated(0),
|
|
activated(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Engage master unit to on operation mode."
|
|
DEFVAL { deactivated }
|
|
::= { musys 5 }
|
|
|
|
musysReadCommStr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SNMP agent read community string. It is used for authentication purpose."
|
|
::= { musys 6 }
|
|
|
|
musysWriteCommStr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SNMP agent write community string. It is used for authentication purpose."
|
|
::= { musys 7 }
|
|
|
|
muswitchesBlockBroadcastMulticast OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
passed(0),
|
|
blocked(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This switch enables or disables the blocking of Ethernet
|
|
control packet except ICMP and ARP to reduce the amount
|
|
of uneccessary overhead introduced to the wireless link."
|
|
::= { muswitches 1 }
|
|
|
|
muswitchesHTTPD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When it is turned on, then the master unit is accessible
|
|
for configuring via web browser (e.g. IE or Nescape)."
|
|
::= { muswitches 5 }
|
|
|
|
muswitchesAutoPowerLevelRemoteUnit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When it is turned on, then the master unit will
|
|
command the remote unit to do power leveling."
|
|
::= { muswitches 7 }
|
|
|
|
mutrafficEthInOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of payload octets received on Ethernet port."
|
|
::= { mutraffic 1 }
|
|
|
|
mutrafficEthOutOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of payload octets transmitted on Ethernet port."
|
|
::= { mutraffic 2 }
|
|
|
|
mutrafficRfInOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of octets of remote's payload received from RF port."
|
|
::= { mutraffic 3 }
|
|
|
|
mutrafficRfOutOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of octets of remote's payload transmitted to RF port."
|
|
::= { mutraffic 4 }
|
|
|
|
musysTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current master unit's temperature value (in Celsius)."
|
|
::= { musys 10 }
|
|
|
|
musysUpdateFlashAndActivate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Save system setting values to Flash and activate the settings."
|
|
DEFVAL {no}
|
|
::= { musys 11 }
|
|
|
|
musysReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deactivated(0),
|
|
activated(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reboot the master unit."
|
|
DEFVAL { deactivated }
|
|
::= { musys 12 }
|
|
|
|
muipconfigIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"New IP address. It will be saved to
|
|
non-volatile memory and activated in 5 secs."
|
|
::= { muipconfig 1 }
|
|
|
|
muipconfigSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"New Subnet mask. It will be saved to
|
|
non-volatile memory and activated in 5 secs."
|
|
::= { muipconfig 2 }
|
|
|
|
muipconfigDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"New Default gateway. It will be saved to
|
|
non-volatile memory and activated in 5 secs."
|
|
::= { muipconfig 3 }
|
|
|
|
-- master unit rf objects
|
|
murfRSSI OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote unit RSSI (in dBm)."
|
|
::= { murf 1 }
|
|
|
|
murfActiveChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..30)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"It specifies the current channel number the master unit operates on."
|
|
::= { murf 2 }
|
|
|
|
murfActivePolarization OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"It specifies the current polarization the master unit operates on."
|
|
::= { murf 3 }
|
|
|
|
murftableChannel1 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 1 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 1 }
|
|
|
|
murftableChannel2 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 2 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 2 }
|
|
|
|
murftableChannel3 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 3 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 3 }
|
|
|
|
murftableChannel4 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 4 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 4 }
|
|
|
|
murftableChannel5 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 5 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 5 }
|
|
|
|
murftableChannel6 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 6 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 6 }
|
|
|
|
murftableChannel7 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 7 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 7 }
|
|
|
|
murftableChannel8 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 8 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 8 }
|
|
|
|
murftableChannel9 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 9 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 9 }
|
|
|
|
murftableChannel10 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 10 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 10 }
|
|
|
|
murftableChannel11 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 11 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 11 }
|
|
|
|
murftableChannel12 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 12 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 12 }
|
|
|
|
murftableChannel13 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 13 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 13 }
|
|
|
|
murftableChannel14 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 14 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 14 }
|
|
|
|
murftableChannel15 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 15 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 15 }
|
|
|
|
murftableChannel16 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 16 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 16 }
|
|
|
|
murftableChannel17 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 17 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 17 }
|
|
|
|
murftableChannel18 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 18 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 18 }
|
|
|
|
murftableChannel19 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 19 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 19 }
|
|
|
|
murftableChannel20 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 20 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 20 }
|
|
|
|
murftableChannel21 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 21 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 21 }
|
|
|
|
murftableChannel22 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 22 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 22 }
|
|
|
|
murftableChannel23 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 23 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 23 }
|
|
|
|
murftableChannel24 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 24 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 24 }
|
|
|
|
murftableChannel25 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 25 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 25 }
|
|
|
|
murftableChannel26 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 26 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 26 }
|
|
|
|
murftableChannel27 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 27 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 27 }
|
|
|
|
murftableChannel28 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 28 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 28 }
|
|
|
|
murftableChannel29 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 29 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 29 }
|
|
|
|
murftableChannel30 OBJECT-TYPE
|
|
SYNTAX INTEGER (5260..5340 | 5736..5836)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RF channel 30 frequency (in MHz). It allows you to create your
|
|
own channel instead of the manufacturing defaults in the master unit.
|
|
Keep in mind that channel width is 20MHz, and the frequency
|
|
specified here is the center frequency.
|
|
Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio."
|
|
::= { murftable 30 }
|
|
|
|
muismTxPowerMax OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum ISM Tx power value can be set (in dBm)."
|
|
::= { muism 1 }
|
|
|
|
muismTxPowerMin OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The minimum ISM Tx power value can be set (in dBm)."
|
|
::= { muism 2 }
|
|
|
|
muismTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ISM RF tx power (in dBm). It specifies the power output
|
|
of the radio, excluding the antenna gain. Check parameters
|
|
muismTxPowerMax and masterismTxPowerMin for power setting range."
|
|
::= { muism 3 }
|
|
|
|
muismRxThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-90 | -85 | -80 | -75 | -70 | -65)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ISM RF rx threshold (in dBm). It specifies the receiver
|
|
sensitivity of the master. By default, the radio's sensitivity is -82dBm.
|
|
The higher the threshold is, the less sensitive the radio will be.
|
|
In M5800S, the value -90 represents the rfrxthreshold is disabled."
|
|
::= { muism 4 }
|
|
|
|
muismTargetRSSI OBJECT-TYPE
|
|
SYNTAX INTEGER (-85..-45)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ISM RF RSSI (in dBm). It specifies the target RSSI from the remote unit
|
|
to the master unit. Based on this parameter, the master unit can power level
|
|
the remote unit so that it receives same level of signal strength from
|
|
the remote unit, regardless far or near. Note that when you set the Target RSSI
|
|
from the remote unit, you need to consider master unit's RF Rx Threshold value.
|
|
The Target RSSI from the remote unit must be 5dB higher than the RF Rx
|
|
Threshold. When the RF Rx Threshold is disabled, the setting of the Target
|
|
RSSI from remote unit shall be no less than -75dBm."
|
|
::= { muism 5 }
|
|
|
|
muuniiTxPowerMax OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is only applicable to M5830S/P5830S radio.
|
|
The maximum UNII Tx power value can be set (in dBm)."
|
|
::= { muunii 1 }
|
|
|
|
muuniiTxPowerMin OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is only applicable to M5830S/P5830S radio.
|
|
The minimum UNII Tx power value can be set (in dBm)."
|
|
::= { muunii 2 }
|
|
|
|
muuniiTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (-128..127)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is only applicable to M5830S/P5830S radio.
|
|
UNII RF tx power (in dBm). It specifies the power output
|
|
of the radio, excluding the antenna gain. Check parameters
|
|
apuniiTxPowerMax and apuniiTxPowerMin for power setting range."
|
|
::= { muunii 3 }
|
|
|
|
muuniiRxThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-90 | -85 | -80 | -75 | -70 | -65)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is only applicable to M5830S/P5830S radio.
|
|
UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the master."
|
|
::= { muunii 4 }
|
|
|
|
muuniiTargetRSSI OBJECT-TYPE
|
|
SYNTAX INTEGER (-85..-45)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is only applicable to M5830S/P5830S radio.
|
|
UNII RF target RSSI (in dBm). It specifies the target RSSI from
|
|
remote unit to the master unit. Based on this parameter, the master can power
|
|
level the remote unit so that it receives same level of signal strength from
|
|
the remote unit, regardless far or near. Note that when you set the Target RSSI
|
|
from the remote unit, you need to consider remote unit's RF Rx Threshold value.
|
|
The Target RSSI from the remote unit must be 5dB higher than the RF Rx Threshold."
|
|
::= { muunii 5 }
|
|
|
|
-- remote unit objects
|
|
ruDeviceId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote unit device ID."
|
|
::= { ru 1 }
|
|
|
|
ruUpstreamMIR OBJECT-TYPE
|
|
SYNTAX INTEGER (100..10000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"It is the Maximum Information Rate (in Kbps)
|
|
the master unit allocates to remote unit."
|
|
DEFVAL { 128 }
|
|
::= { ru 2 }
|
|
|
|
remoteDownstreamMIR OBJECT-TYPE
|
|
SYNTAX INTEGER (100..10000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"It is the Maximum Information Rate (in Kbps)
|
|
the master unit allocates to the remote unit."
|
|
DEFVAL { 9999 }
|
|
::= { ru 3 }
|
|
|
|
ruPowerLvl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deactivated(0),
|
|
activated(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"It is a feature that is typically found in more
|
|
elaborate mobile systems such as cellular CDMA
|
|
networks. Using this feature, the remote unit have its
|
|
RF power output adjusted until its signal strength
|
|
received in the master unit is roughly the same."
|
|
DEFVAL {deactivated}
|
|
::= { ru 4 }
|
|
|
|
ruReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deactivated(0),
|
|
activated(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Master unit issues reboot command to remote unit."
|
|
DEFVAL { deactivated }
|
|
::= { ru 5 }
|
|
|
|
ruAssociation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
associated(1),
|
|
notAssociated(0)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Remote unit association status."
|
|
::= { ru 6 }
|
|
|
|
ruDistance OBJECT-TYPE
|
|
SYNTAX INTEGER (0..40)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Distance of remote unit (in mile)."
|
|
::= { ru 7 }
|
|
|
|
-- trapconfig objects
|
|
trapconfigDest1IPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trap destination 1 IP address."
|
|
::= { trapconfig 2 }
|
|
|
|
trapconfigDest2IPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trap destination 2 IP address."
|
|
::= { trapconfig 3 }
|
|
|
|
|
|
-- MIB version object
|
|
mibinfoVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Trango master unit MIB Version."
|
|
::= { mibinfo 1 }
|
|
|
|
-- Trap objects
|
|
|
|
-- End of file <trango_P5830S_MU_1p0.mib>
|
|
END
|
|
|