-- Private MIB definition for Trango Systems -- Access 58xx series wireless broadband Master Unit P5830S -- Version: 1.0 -- Date: June 10, 2003 -- -- Copyright 2003: Trango Systems, Inc. All Rights Reserved. -- Trango Systems, Inc. 15070 Avenue Of Science Suite 200 San Diego CA 92128 USA. -- -- Reproduction of this document is authorized on condition that the -- foregoing copyright notice is included. TRANGOP5830S-MU-MIB DEFINITIONS ::= BEGIN -- MIB module for enterprise trango wireless broadband -- of management of P5830S master unit IMPORTS enterprises, IpAddress, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- textual conventions DisplayString ::= OCTET STRING -- This data type is used to model textual information taken -- from the NVT ASCII character set. By convention, objects -- with this syntax are declared as having -- -- SIZE (0..255) -- trango wireless broadband MIB registration id assigned to 5454. -- customer needs to change this value based on their OEM value. trango OBJECT IDENTIFIER ::= { enterprises 5454 } tbw OBJECT IDENTIFIER ::= { trango 1 } p5830smu OBJECT IDENTIFIER ::= { tbw 22 } -- modules branched from p5830smu musys OBJECT IDENTIFIER ::= { p5830smu 1 } murf OBJECT IDENTIFIER ::= { p5830smu 2 } ru OBJECT IDENTIFIER ::= { p5830smu 3 } trapconfig OBJECT IDENTIFIER ::= { p5830smu 4 } mibinfo OBJECT IDENTIFIER ::= { p5830smu 5 } muversion OBJECT IDENTIFIER ::= { musys 1 } muswitches OBJECT IDENTIFIER ::= { musys 8} mutraffic OBJECT IDENTIFIER ::= { musys 9} muipconfig OBJECT IDENTIFIER ::= { musys 13} murftable OBJECT IDENTIFIER ::= { murf 4 } muism OBJECT IDENTIFIER ::= { murf 5 } muunii OBJECT IDENTIFIER ::= { murf 6 } -- MIB objects defined below -- master unit system objects muversionHW OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "Hardware version." ::= { muversion 1 } muversionFW OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) ACCESS read-only STATUS mandatory DESCRIPTION "Main firmware version. Format: HD." ::= { muversion 2 } muversionFPGA OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "FPGA firmware version." ::= { muversion 3 } muversionFWChecksum OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Master unit firmware checksum." ::= { muversion 4 } muversionFPGAChecksum OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Master unit FPGA checksum." ::= { muversion 5 } musysDeviceId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "Master unit device Id. Each master unit in a cluster shall have unique ID." ::= { musys 2 } musysDefOpMode OBJECT-TYPE SYNTAX INTEGER { on(16), off(0) } ACCESS read-write STATUS mandatory DESCRIPTION "The operation mode (on or off) the master unit is on after reboot/power cycle." ::= { musys 3 } musysCurOpMode OBJECT-TYPE SYNTAX INTEGER { on(16), off(0) } ACCESS read-only STATUS mandatory DESCRIPTION "Master unit's current operation mode." ::= { musys 4 } musysActivateOpmode OBJECT-TYPE SYNTAX INTEGER { deactivated(0), activated(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Engage master unit to on operation mode." DEFVAL { deactivated } ::= { musys 5 } musysReadCommStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "SNMP agent read community string. It is used for authentication purpose." ::= { musys 6 } musysWriteCommStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "SNMP agent write community string. It is used for authentication purpose." ::= { musys 7 } muswitchesBlockBroadcastMulticast OBJECT-TYPE SYNTAX INTEGER { passed(0), blocked(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This switch enables or disables the blocking of Ethernet control packet except ICMP and ARP to reduce the amount of uneccessary overhead introduced to the wireless link." ::= { muswitches 1 } muswitchesHTTPD OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "When it is turned on, then the master unit is accessible for configuring via web browser (e.g. IE or Nescape)." ::= { muswitches 5 } muswitchesAutoPowerLevelRemoteUnit OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "When it is turned on, then the master unit will command the remote unit to do power leveling." ::= { muswitches 7 } mutrafficEthInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of payload octets received on Ethernet port." ::= { mutraffic 1 } mutrafficEthOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of payload octets transmitted on Ethernet port." ::= { mutraffic 2 } mutrafficRfInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of octets of remote's payload received from RF port." ::= { mutraffic 3 } mutrafficRfOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of octets of remote's payload transmitted to RF port." ::= { mutraffic 4 } musysTemperature OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "Current master unit's temperature value (in Celsius)." ::= { musys 10 } musysUpdateFlashAndActivate OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Save system setting values to Flash and activate the settings." DEFVAL {no} ::= { musys 11 } musysReboot OBJECT-TYPE SYNTAX INTEGER { deactivated(0), activated(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reboot the master unit." DEFVAL { deactivated } ::= { musys 12 } muipconfigIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "New IP address. It will be saved to non-volatile memory and activated in 5 secs." ::= { muipconfig 1 } muipconfigSubnet OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "New Subnet mask. It will be saved to non-volatile memory and activated in 5 secs." ::= { muipconfig 2 } muipconfigDefaultGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "New Default gateway. It will be saved to non-volatile memory and activated in 5 secs." ::= { muipconfig 3 } -- master unit rf objects murfRSSI OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "Remote unit RSSI (in dBm)." ::= { murf 1 } murfActiveChannel OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-write STATUS mandatory DESCRIPTION "It specifies the current channel number the master unit operates on." ::= { murf 2 } murfActivePolarization OBJECT-TYPE SYNTAX DisplayString (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "It specifies the current polarization the master unit operates on." ::= { murf 3 } murftableChannel1 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 1 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 1 } murftableChannel2 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 2 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 2 } murftableChannel3 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 3 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 3 } murftableChannel4 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 4 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 4 } murftableChannel5 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 5 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 5 } murftableChannel6 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 6 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 6 } murftableChannel7 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 7 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 7 } murftableChannel8 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 8 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 8 } murftableChannel9 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 9 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 9 } murftableChannel10 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 10 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 10 } murftableChannel11 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 11 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 11 } murftableChannel12 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 12 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 12 } murftableChannel13 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 13 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 13 } murftableChannel14 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 14 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 14 } murftableChannel15 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 15 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 15 } murftableChannel16 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 16 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 16 } murftableChannel17 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 17 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 17 } murftableChannel18 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 18 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 18 } murftableChannel19 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 19 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 19 } murftableChannel20 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 20 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 20 } murftableChannel21 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 21 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 21 } murftableChannel22 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 22 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 22 } murftableChannel23 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 23 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 23 } murftableChannel24 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 24 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 24 } murftableChannel25 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 25 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 25 } murftableChannel26 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 26 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 26 } murftableChannel27 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 27 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 27 } murftableChannel28 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 28 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 28 } murftableChannel29 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 29 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 29 } murftableChannel30 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 30 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { murftable 30 } muismTxPowerMax OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum ISM Tx power value can be set (in dBm)." ::= { muism 1 } muismTxPowerMin OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "The minimum ISM Tx power value can be set (in dBm)." ::= { muism 2 } muismTxPower OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-write STATUS mandatory DESCRIPTION "ISM RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters muismTxPowerMax and masterismTxPowerMin for power setting range." ::= { muism 3 } muismRxThreshold OBJECT-TYPE SYNTAX INTEGER (-90 | -85 | -80 | -75 | -70 | -65) ACCESS read-write STATUS mandatory DESCRIPTION "ISM RF rx threshold (in dBm). It specifies the receiver sensitivity of the master. By default, the radio's sensitivity is -82dBm. The higher the threshold is, the less sensitive the radio will be. In M5800S, the value -90 represents the rfrxthreshold is disabled." ::= { muism 4 } muismTargetRSSI OBJECT-TYPE SYNTAX INTEGER (-85..-45) ACCESS read-write STATUS mandatory DESCRIPTION "ISM RF RSSI (in dBm). It specifies the target RSSI from the remote unit to the master unit. Based on this parameter, the master unit can power level the remote unit so that it receives same level of signal strength from the remote unit, regardless far or near. Note that when you set the Target RSSI from the remote unit, you need to consider master unit's RF Rx Threshold value. The Target RSSI from the remote unit must be 5dB higher than the RF Rx Threshold. When the RF Rx Threshold is disabled, the setting of the Target RSSI from remote unit shall be no less than -75dBm." ::= { muism 5 } muuniiTxPowerMax OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "This object is only applicable to M5830S/P5830S radio. The maximum UNII Tx power value can be set (in dBm)." ::= { muunii 1 } muuniiTxPowerMin OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "This object is only applicable to M5830S/P5830S radio. The minimum UNII Tx power value can be set (in dBm)." ::= { muunii 2 } muuniiTxPower OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-write STATUS mandatory DESCRIPTION "This object is only applicable to M5830S/P5830S radio. UNII RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters apuniiTxPowerMax and apuniiTxPowerMin for power setting range." ::= { muunii 3 } muuniiRxThreshold OBJECT-TYPE SYNTAX INTEGER (-90 | -85 | -80 | -75 | -70 | -65) ACCESS read-write STATUS mandatory DESCRIPTION "This object is only applicable to M5830S/P5830S radio. UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the master." ::= { muunii 4 } muuniiTargetRSSI OBJECT-TYPE SYNTAX INTEGER (-85..-45) ACCESS read-write STATUS mandatory DESCRIPTION "This object is only applicable to M5830S/P5830S radio. UNII RF target RSSI (in dBm). It specifies the target RSSI from remote unit to the master unit. Based on this parameter, the master can power level the remote unit so that it receives same level of signal strength from the remote unit, regardless far or near. Note that when you set the Target RSSI from the remote unit, you need to consider remote unit's RF Rx Threshold value. The Target RSSI from the remote unit must be 5dB higher than the RF Rx Threshold." ::= { muunii 5 } -- remote unit objects ruDeviceId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Remote unit device ID." ::= { ru 1 } ruUpstreamMIR OBJECT-TYPE SYNTAX INTEGER (100..10000) ACCESS read-write STATUS mandatory DESCRIPTION "It is the Maximum Information Rate (in Kbps) the master unit allocates to remote unit." DEFVAL { 128 } ::= { ru 2 } remoteDownstreamMIR OBJECT-TYPE SYNTAX INTEGER (100..10000) ACCESS read-write STATUS mandatory DESCRIPTION "It is the Maximum Information Rate (in Kbps) the master unit allocates to the remote unit." DEFVAL { 9999 } ::= { ru 3 } ruPowerLvl OBJECT-TYPE SYNTAX INTEGER { deactivated(0), activated(1) } ACCESS read-write STATUS mandatory DESCRIPTION "It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, the remote unit have its RF power output adjusted until its signal strength received in the master unit is roughly the same." DEFVAL {deactivated} ::= { ru 4 } ruReboot OBJECT-TYPE SYNTAX INTEGER { deactivated(0), activated(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Master unit issues reboot command to remote unit." DEFVAL { deactivated } ::= { ru 5 } ruAssociation OBJECT-TYPE SYNTAX INTEGER { associated(1), notAssociated(0) } ACCESS read-only STATUS mandatory DESCRIPTION "Remote unit association status." ::= { ru 6 } ruDistance OBJECT-TYPE SYNTAX INTEGER (0..40) ACCESS read-only STATUS mandatory DESCRIPTION "Distance of remote unit (in mile)." ::= { ru 7 } -- trapconfig objects trapconfigDest1IPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Trap destination 1 IP address." ::= { trapconfig 2 } trapconfigDest2IPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Trap destination 2 IP address." ::= { trapconfig 3 } -- MIB version object mibinfoVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "Trango master unit MIB Version." ::= { mibinfo 1 } -- Trap objects -- End of file END