Observium_CE/mibs/infinera/LUM-IFSONET-MIB

739 lines
20 KiB
Plaintext

LUM-IFSONET-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
DateAndTime
FROM SNMPv2-TC
lumModules, lumIfSonetMIB
FROM LUM-REG
Unsigned32WithNA, SignalStatusWithNA, FaultStatusWithNA,
DisplayStringWithNA, MgmtNameString, EnabledDisabledWithNA
FROM LUM-TC;
lumIfSonetMIBModule MODULE-IDENTITY
LAST-UPDATED
"201706150000Z" -- June 15th 2017
ORGANIZATION
"Infinera Corporation"
CONTACT-INFO
"techsupport@infinera.com"
DESCRIPTION
"The MIB module for management of sonet parameters on port objects.
This module describes the section and line sections in Sonet.
References are referring to GR-253-CORE Telecordia Technologies
Generic Requirement document, Issue 5 (Oct 2009).
The tables contained in this MIB are:
(1) The General group contains some general attributes as time stamps
and tables sizes.
(2) The section group contains information and
configuration for the Sonet section.
(3) The line group contains information and
configuration for the Sonet line.
"
REVISION
"201706150000Z" -- June 15th 2017
DESCRIPTION
"Changes made for release r29.0:
- Changed ORGANIZATION and CONTACT-INFO"
REVISION
"201501230000Z" -- January 23rd 2015
DESCRIPTION
"Changes made for release r24:
- Added Section Tx LOF alarm."
REVISION
"201405160000Z" -- May 16th 2014
DESCRIPTION
"Changes made for release r23:
- Changed board name from tp10gotn to tphex10gotn.
- Added tpmrHL16G board"
REVISION
"201311150000Z" -- November 15th 2013
DESCRIPTION
"Changes made for release r22:
- Added tp10gotn board."
REVISION
"201305010000Z" -- May 1st 2013
DESCRIPTION
"The initial revision of this module."
::= { lumModules 53 }
-- ----------------------------------------------------
-- Compliance area, containing groups and compliance
-- specifications.
-- ----------------------------------------------------
lumIfSonetConfs OBJECT IDENTIFIER ::= { lumIfSonetMIB 1 }
lumIfSonetGroups OBJECT IDENTIFIER ::= { lumIfSonetConfs 1 }
lumIfSonetCompl OBJECT IDENTIFIER ::= { lumIfSonetConfs 2 }
-- ----------------------------------------------------
-- Root for objects in the IFSONET MIB
-- ----------------------------------------------------
lumIfSonetMIBObjects OBJECT IDENTIFIER ::= { lumIfSonetMIB 2 }
-- ----------------------------------------------------
-- This MIB contains the following groups:
-- ----------------------------------------------------
ifSonetGeneral OBJECT IDENTIFIER ::= { lumIfSonetMIBObjects 1 }
ifSonetSectionList OBJECT IDENTIFIER ::= { lumIfSonetMIBObjects 2 }
ifSonetLineList OBJECT IDENTIFIER ::= { lumIfSonetMIBObjects 3 }
ifSonetStsList OBJECT IDENTIFIER ::= { lumIfSonetMIBObjects 4 }
ifSonetStsSpeList OBJECT IDENTIFIER ::= { lumIfSonetMIBObjects 5 }
-- ----------------------------------------------------
-- General group
-- ----------------------------------------------------
ifSonetGeneralConfigLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the configuration of the MIB was
last changed.
"
::= { ifSonetGeneral 1 }
ifSonetGeneralStateLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the state and/or configuration of the
MIB was last changed.
"
::= { ifSonetGeneral 2 }
ifSonetGeneralIfSonetSectionTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of section table.
"
::= { ifSonetGeneral 3 }
ifSonetGeneralIfSonetSectionConfigLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the configuration of the table was
last changed.
"
::= { ifSonetGeneral 4 }
ifSonetGeneralIfSonetSectionStateLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the state and/or configuration of the
table was last changed.
"
::= { ifSonetGeneral 5 }
ifSonetGeneralIfSonetLineTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of line table
"
::= { ifSonetGeneral 6 }
ifSonetGeneralIfSonetLineConfigLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the configuration of the table was
last changed.
"
::= { ifSonetGeneral 7 }
ifSonetGeneralIfSonetLineStateLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the state and/or configuration of the
table was last changed.
"
::= { ifSonetGeneral 8 }
-- ----------------------------------------------------
-- SONET SECTION group
-- ----------------------------------------------------
ifSonetSectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfSonetSectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The section group contains information and
configuration for the section."
::= { ifSonetSectionList 1 }
ifSonetSectionEntry OBJECT-TYPE
SYNTAX IfSonetSectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ifSonet section list.
"
INDEX { ifSonetSectionIndex }
::= { ifSonetSectionTable 1 }
IfSonetSectionEntry ::=
SEQUENCE {
ifSonetSectionIndex Unsigned32,
ifSonetSectionName MgmtNameString,
ifSonetSectionConnIfBasicIfIndex Unsigned32WithNA,
ifSonetSectionOhTransparencyBitmask Unsigned32WithNA,
ifSonetSectionTraceTransmitted DisplayStringWithNA,
ifSonetSectionTraceReceived DisplayStringWithNA,
ifSonetSectionTraceExpected DisplayStringWithNA,
ifSonetSectionTraceAlarmMode EnabledDisabledWithNA,
ifSonetSectionTxSignalStatus SignalStatusWithNA,
ifSonetSectionRxSignalStatus SignalStatusWithNA,
ifSonetSectionTraceMismatch FaultStatusWithNA,
ifSonetSectionLossOfFrame FaultStatusWithNA,
ifSonetSectionTxLossOfFrame FaultStatusWithNA }
ifSonetSectionIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index assigned to each entry.
"
::= { ifSonetSectionEntry 1 }
ifSonetSectionName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the Sonet section, for example
'section:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
"
::= { ifSonetSectionEntry 2 }
ifSonetSectionConnIfBasicIfIndex OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that describes to which index in ifBasicIf table
this object is related.
"
::= { ifSonetSectionEntry 3 }
ifSonetSectionOhTransparencyBitmask OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OH transparency bitmask.
Bits:
B1 = 0x01
E1 = 0x02
F1 = 0x04
D1-D3 = 0x08
J0 = 0x10
"
DEFVAL { 0 }
::= { ifSonetSectionEntry 4 }
ifSonetSectionTraceTransmitted OBJECT-TYPE
SYNTAX DisplayStringWithNA (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trace to be transmitted from this interface.
Default value: <IP address>:<subrack>:<slot>:<port>
Note that only the last part of the address is used.
The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.
"
::= { ifSonetSectionEntry 5 }
ifSonetSectionTraceReceived OBJECT-TYPE
SYNTAX DisplayStringWithNA (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received trace for this interface.
The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
attribute is not possible to read at the moment.
"
::= { ifSonetSectionEntry 6 }
ifSonetSectionTraceExpected OBJECT-TYPE
SYNTAX DisplayStringWithNA (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trace used for matching against the received trace.
The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.
"
DEFVAL { "" }
::= { ifSonetSectionEntry 7 }
ifSonetSectionTraceAlarmMode OBJECT-TYPE
SYNTAX EnabledDisabledWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Controls if the trace identifier mismatch alarm
should be raised if received trace and expected trace
differs.
disabled - The alarm is disabled.
enabled - The alarm is raised if expected trace identifier
differs from the received trace identifier.
"
DEFVAL { disabled }
::= { ifSonetSectionEntry 8 }
ifSonetSectionTxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifSonetSectionEntry 9 }
ifSonetSectionRxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifSonetSectionEntry 10 }
ifSonetSectionTraceMismatch OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trace identifier mismatch (TIM).
Indicates if the expected trace identifier differs from the
received trace identifier.
Reference: GR-253/6.2.1.1.9.
alarm: The received trace identifier differs from
the expected trace identifier.
ok: The identifiers match.
"
::= { ifSonetSectionEntry 11 }
ifSonetSectionLossOfFrame OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Section-Loss of frame (LOF).
Reference: GR-253/6.2.1.1.2
alarm: A SECTION frame cannot be located.
ok: A SECTION frame can be located.
"
::= { ifSonetSectionEntry 12 }
ifSonetSectionTxLossOfFrame OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Section-Loss of frame (LOF).
Reference: GR-253/6.2.1.1.2
alarm: A SECTION frame cannot be located.
ok: A SECTION frame can be located.
"
::= { ifSonetSectionEntry 13 }
-- ----------------------------------------------------
-- SONET LINE group
-- ----------------------------------------------------
ifSonetLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfSonetLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The line group contains information and
configuration for the line overhead."
::= { ifSonetLineList 1 }
ifSonetLineEntry OBJECT-TYPE
SYNTAX IfSonetLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ifSonet line list.
"
INDEX { ifSonetLineIndex }
::= { ifSonetLineTable 1 }
IfSonetLineEntry ::=
SEQUENCE {
ifSonetLineIndex Unsigned32,
ifSonetLineName MgmtNameString,
ifSonetLineConnIfBasicIfIndex Unsigned32WithNA,
ifSonetLineOhTransparencyBitmask Unsigned32WithNA,
ifSonetLineTxSignalStatus SignalStatusWithNA,
ifSonetLineRxSignalStatus SignalStatusWithNA,
ifSonetLineRxAlarmIndicationSignal FaultStatusWithNA,
ifSonetLineRemoteDefectIndication FaultStatusWithNA,
ifSonetLineTxAlarmIndicationSignal FaultStatusWithNA }
ifSonetLineIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index assigned to each entry.
"
::= { ifSonetLineEntry 1 }
ifSonetLineName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the Sonet line, for example
'line:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
"
::= { ifSonetLineEntry 2 }
ifSonetLineConnIfBasicIfIndex OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that describes to which index in ifBasicIf table
this object is related.
"
::= { ifSonetLineEntry 3 }
ifSonetLineOhTransparencyBitmask OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OH transparency bitmask.
Bits:
B2 = 0x01
E2 = 0x02
D4-D12 = 0x04
K1-K2 = 0x08
"
DEFVAL { 0 }
::= { ifSonetLineEntry 4 }
ifSonetLineTxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifSonetLineEntry 5 }
ifSonetLineRxSignalStatus OBJECT-TYPE
SYNTAX SignalStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { ifSonetLineEntry 6 }
ifSonetLineRxAlarmIndicationSignal OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Line alarm indication signal (AIS).
Reference: GR-253/6.2.1.2.1
alarm: An line AIS signal is detected.
ok: The line AIS is cleared.
"
::= { ifSonetLineEntry 7 }
ifSonetLineRemoteDefectIndication OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Line remote defect indication (RDI).
Reference: GR-253/6.2.1.3
alarm: RDI indication (in frame) active.
ok: RDI indication inactive.
"
::= { ifSonetLineEntry 8 }
ifSonetLineTxAlarmIndicationSignal OBJECT-TYPE
SYNTAX FaultStatusWithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Line alarm indication signal (AIS).
Reference: GR-253/6.2.1.2.1
alarm: An line AIS signal is detected.
ok: The line AIS is cleared.
"
::= { ifSonetLineEntry 9 }
-- ----------------------------------------------------
-- Notifications
-- ----------------------------------------------------
-- ----------------------------------------------------
-- Object and event groups
-- ----------------------------------------------------
ifSonetGeneralGroupV1 OBJECT-GROUP
OBJECTS {
ifSonetGeneralConfigLastChangeTime,
ifSonetGeneralStateLastChangeTime,
ifSonetGeneralIfSonetSectionTableSize,
ifSonetGeneralIfSonetSectionConfigLastChangeTime,
ifSonetGeneralIfSonetSectionStateLastChangeTime,
ifSonetGeneralIfSonetLineTableSize,
ifSonetGeneralIfSonetLineConfigLastChangeTime,
ifSonetGeneralIfSonetLineStateLastChangeTime }
STATUS current
DESCRIPTION
"The general objects."
::= { lumIfSonetGroups 1 }
ifSonetSectionGroupV1 OBJECT-GROUP
OBJECTS {
ifSonetSectionIndex,
ifSonetSectionName,
ifSonetSectionConnIfBasicIfIndex,
ifSonetSectionOhTransparencyBitmask,
ifSonetSectionTraceTransmitted,
ifSonetSectionTraceReceived,
ifSonetSectionTraceExpected,
ifSonetSectionTraceAlarmMode,
ifSonetSectionTxSignalStatus,
ifSonetSectionRxSignalStatus,
ifSonetSectionTraceMismatch,
ifSonetSectionLossOfFrame }
STATUS deprecated
DESCRIPTION
"The ifSonet SECTION objects (R20.0)."
::= { lumIfSonetGroups 2 }
ifSonetLineGroupV1 OBJECT-GROUP
OBJECTS {
ifSonetLineIndex,
ifSonetLineName,
ifSonetLineConnIfBasicIfIndex,
ifSonetLineOhTransparencyBitmask,
ifSonetLineTxSignalStatus,
ifSonetLineRxSignalStatus,
ifSonetLineRxAlarmIndicationSignal,
ifSonetLineRemoteDefectIndication }
STATUS deprecated
DESCRIPTION
"The ifSonet LINE objects (R20.0)."
::= { lumIfSonetGroups 3 }
ifSonetLineGroupV2 OBJECT-GROUP
OBJECTS {
ifSonetLineIndex,
ifSonetLineName,
ifSonetLineConnIfBasicIfIndex,
ifSonetLineOhTransparencyBitmask,
ifSonetLineTxSignalStatus,
ifSonetLineRxSignalStatus,
ifSonetLineRxAlarmIndicationSignal,
ifSonetLineRemoteDefectIndication,
ifSonetLineTxAlarmIndicationSignal }
STATUS current
DESCRIPTION
"The ifSonet LINE objects (R24.0)."
::= { lumIfSonetGroups 4 }
ifSonetSectionGroupV2 OBJECT-GROUP
OBJECTS {
ifSonetSectionIndex,
ifSonetSectionName,
ifSonetSectionConnIfBasicIfIndex,
ifSonetSectionOhTransparencyBitmask,
ifSonetSectionTraceTransmitted,
ifSonetSectionTraceReceived,
ifSonetSectionTraceExpected,
ifSonetSectionTraceAlarmMode,
ifSonetSectionTxSignalStatus,
ifSonetSectionRxSignalStatus,
ifSonetSectionTraceMismatch,
ifSonetSectionLossOfFrame,
ifSonetSectionTxLossOfFrame }
STATUS current
DESCRIPTION
"The ifSonet SECTION objects (R24.0)."
::= { lumIfSonetGroups 5 }
-- ----------------------------------------------------
-- Compliance
-- ----------------------------------------------------
lumIfSonetComplV1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the ifSonet MIB. (R20.0)"
MODULE
MANDATORY-GROUPS {
ifSonetGeneralGroupV1,
ifSonetSectionGroupV1,
ifSonetLineGroupV1 }
::= { lumIfSonetCompl 1 }
lumIfSonetComplV2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the ifSonet MIB. (R24.0)"
MODULE
MANDATORY-GROUPS {
ifSonetGeneralGroupV1,
ifSonetSectionGroupV1,
ifSonetLineGroupV2 }
::= { lumIfSonetCompl 2 }
lumIfSonetComplV3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Basic implementation requirements for the ifSonet MIB. (R24.0)"
MODULE
MANDATORY-GROUPS {
ifSonetGeneralGroupV1,
ifSonetSectionGroupV2,
ifSonetLineGroupV2 }
::= { lumIfSonetCompl 3 }
END