LUM-IFSONET-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF DateAndTime FROM SNMPv2-TC lumModules, lumIfSonetMIB FROM LUM-REG Unsigned32WithNA, SignalStatusWithNA, FaultStatusWithNA, DisplayStringWithNA, MgmtNameString, EnabledDisabledWithNA FROM LUM-TC; lumIfSonetMIBModule MODULE-IDENTITY LAST-UPDATED "201706150000Z" -- June 15th 2017 ORGANIZATION "Infinera Corporation" CONTACT-INFO "techsupport@infinera.com" DESCRIPTION "The MIB module for management of sonet parameters on port objects. This module describes the section and line sections in Sonet. References are referring to GR-253-CORE Telecordia Technologies Generic Requirement document, Issue 5 (Oct 2009). The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The section group contains information and configuration for the Sonet section. (3) The line group contains information and configuration for the Sonet line. " REVISION "201706150000Z" -- June 15th 2017 DESCRIPTION "Changes made for release r29.0: - Changed ORGANIZATION and CONTACT-INFO" REVISION "201501230000Z" -- January 23rd 2015 DESCRIPTION "Changes made for release r24: - Added Section Tx LOF alarm." REVISION "201405160000Z" -- May 16th 2014 DESCRIPTION "Changes made for release r23: - Changed board name from tp10gotn to tphex10gotn. - Added tpmrHL16G board" REVISION "201311150000Z" -- November 15th 2013 DESCRIPTION "Changes made for release r22: - Added tp10gotn board." REVISION "201305010000Z" -- May 1st 2013 DESCRIPTION "The initial revision of this module." ::= { lumModules 53 } -- ---------------------------------------------------- -- Compliance area, containing groups and compliance -- specifications. -- ---------------------------------------------------- lumIfSonetConfs OBJECT IDENTIFIER ::= { lumIfSonetMIB 1 } lumIfSonetGroups OBJECT IDENTIFIER ::= { lumIfSonetConfs 1 } lumIfSonetCompl OBJECT IDENTIFIER ::= { lumIfSonetConfs 2 } -- ---------------------------------------------------- -- Root for objects in the IFSONET MIB -- ---------------------------------------------------- lumIfSonetMIBObjects OBJECT IDENTIFIER ::= { lumIfSonetMIB 2 } -- ---------------------------------------------------- -- This MIB contains the following groups: -- ---------------------------------------------------- ifSonetGeneral OBJECT IDENTIFIER ::= { lumIfSonetMIBObjects 1 } ifSonetSectionList OBJECT IDENTIFIER ::= { lumIfSonetMIBObjects 2 } ifSonetLineList OBJECT IDENTIFIER ::= { lumIfSonetMIBObjects 3 } ifSonetStsList OBJECT IDENTIFIER ::= { lumIfSonetMIBObjects 4 } ifSonetStsSpeList OBJECT IDENTIFIER ::= { lumIfSonetMIBObjects 5 } -- ---------------------------------------------------- -- General group -- ---------------------------------------------------- ifSonetGeneralConfigLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the MIB was last changed. " ::= { ifSonetGeneral 1 } ifSonetGeneralStateLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state and/or configuration of the MIB was last changed. " ::= { ifSonetGeneral 2 } ifSonetGeneralIfSonetSectionTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of section table. " ::= { ifSonetGeneral 3 } ifSonetGeneralIfSonetSectionConfigLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the table was last changed. " ::= { ifSonetGeneral 4 } ifSonetGeneralIfSonetSectionStateLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state and/or configuration of the table was last changed. " ::= { ifSonetGeneral 5 } ifSonetGeneralIfSonetLineTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of line table " ::= { ifSonetGeneral 6 } ifSonetGeneralIfSonetLineConfigLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the configuration of the table was last changed. " ::= { ifSonetGeneral 7 } ifSonetGeneralIfSonetLineStateLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the state and/or configuration of the table was last changed. " ::= { ifSonetGeneral 8 } -- ---------------------------------------------------- -- SONET SECTION group -- ---------------------------------------------------- ifSonetSectionTable OBJECT-TYPE SYNTAX SEQUENCE OF IfSonetSectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The section group contains information and configuration for the section." ::= { ifSonetSectionList 1 } ifSonetSectionEntry OBJECT-TYPE SYNTAX IfSonetSectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ifSonet section list. " INDEX { ifSonetSectionIndex } ::= { ifSonetSectionTable 1 } IfSonetSectionEntry ::= SEQUENCE { ifSonetSectionIndex Unsigned32, ifSonetSectionName MgmtNameString, ifSonetSectionConnIfBasicIfIndex Unsigned32WithNA, ifSonetSectionOhTransparencyBitmask Unsigned32WithNA, ifSonetSectionTraceTransmitted DisplayStringWithNA, ifSonetSectionTraceReceived DisplayStringWithNA, ifSonetSectionTraceExpected DisplayStringWithNA, ifSonetSectionTraceAlarmMode EnabledDisabledWithNA, ifSonetSectionTxSignalStatus SignalStatusWithNA, ifSonetSectionRxSignalStatus SignalStatusWithNA, ifSonetSectionTraceMismatch FaultStatusWithNA, ifSonetSectionLossOfFrame FaultStatusWithNA, ifSonetSectionTxLossOfFrame FaultStatusWithNA } ifSonetSectionIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An index assigned to each entry. " ::= { ifSonetSectionEntry 1 } ifSonetSectionName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The management name of the Sonet section, for example 'section:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. " ::= { ifSonetSectionEntry 2 } ifSonetSectionConnIfBasicIfIndex OBJECT-TYPE SYNTAX Unsigned32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "An index that describes to which index in ifBasicIf table this object is related. " ::= { ifSonetSectionEntry 3 } ifSonetSectionOhTransparencyBitmask OBJECT-TYPE SYNTAX Unsigned32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "The OH transparency bitmask. Bits: B1 = 0x01 E1 = 0x02 F1 = 0x04 D1-D3 = 0x08 J0 = 0x10 " DEFVAL { 0 } ::= { ifSonetSectionEntry 4 } ifSonetSectionTraceTransmitted OBJECT-TYPE SYNTAX DisplayStringWithNA (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The trace to be transmitted from this interface. Default value: ::: Note that only the last part of the address is used. The trace _notApplicable_ is used to tell SNMP clients that attribute is not used in current configuration. " ::= { ifSonetSectionEntry 5 } ifSonetSectionTraceReceived OBJECT-TYPE SYNTAX DisplayStringWithNA (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The received trace for this interface. The trace _notApplicable_ is used to tell SNMP clients that attribute is not used in current configuration. The trace _notAvailable_ is used to tell SNMP clients that attribute is not possible to read at the moment. " ::= { ifSonetSectionEntry 6 } ifSonetSectionTraceExpected OBJECT-TYPE SYNTAX DisplayStringWithNA (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Trace used for matching against the received trace. The trace _notApplicable_ is used to tell SNMP clients that attribute is not used in current configuration. " DEFVAL { "" } ::= { ifSonetSectionEntry 7 } ifSonetSectionTraceAlarmMode OBJECT-TYPE SYNTAX EnabledDisabledWithNA MAX-ACCESS read-only STATUS current DESCRIPTION "Controls if the trace identifier mismatch alarm should be raised if received trace and expected trace differs. disabled - The alarm is disabled. enabled - The alarm is raised if expected trace identifier differs from the received trace identifier. " DEFVAL { disabled } ::= { ifSonetSectionEntry 8 } ifSonetSectionTxSignalStatus OBJECT-TYPE SYNTAX SignalStatusWithNA MAX-ACCESS read-only STATUS current DESCRIPTION "The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. " ::= { ifSonetSectionEntry 9 } ifSonetSectionRxSignalStatus OBJECT-TYPE SYNTAX SignalStatusWithNA MAX-ACCESS read-only STATUS current DESCRIPTION "The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. " ::= { ifSonetSectionEntry 10 } ifSonetSectionTraceMismatch OBJECT-TYPE SYNTAX FaultStatusWithNA MAX-ACCESS read-only STATUS current DESCRIPTION "Trace identifier mismatch (TIM). Indicates if the expected trace identifier differs from the received trace identifier. Reference: GR-253/6.2.1.1.9. alarm: The received trace identifier differs from the expected trace identifier. ok: The identifiers match. " ::= { ifSonetSectionEntry 11 } ifSonetSectionLossOfFrame OBJECT-TYPE SYNTAX FaultStatusWithNA MAX-ACCESS read-only STATUS current DESCRIPTION "Rx Section-Loss of frame (LOF). Reference: GR-253/6.2.1.1.2 alarm: A SECTION frame cannot be located. ok: A SECTION frame can be located. " ::= { ifSonetSectionEntry 12 } ifSonetSectionTxLossOfFrame OBJECT-TYPE SYNTAX FaultStatusWithNA MAX-ACCESS read-only STATUS current DESCRIPTION "Tx Section-Loss of frame (LOF). Reference: GR-253/6.2.1.1.2 alarm: A SECTION frame cannot be located. ok: A SECTION frame can be located. " ::= { ifSonetSectionEntry 13 } -- ---------------------------------------------------- -- SONET LINE group -- ---------------------------------------------------- ifSonetLineTable OBJECT-TYPE SYNTAX SEQUENCE OF IfSonetLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The line group contains information and configuration for the line overhead." ::= { ifSonetLineList 1 } ifSonetLineEntry OBJECT-TYPE SYNTAX IfSonetLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ifSonet line list. " INDEX { ifSonetLineIndex } ::= { ifSonetLineTable 1 } IfSonetLineEntry ::= SEQUENCE { ifSonetLineIndex Unsigned32, ifSonetLineName MgmtNameString, ifSonetLineConnIfBasicIfIndex Unsigned32WithNA, ifSonetLineOhTransparencyBitmask Unsigned32WithNA, ifSonetLineTxSignalStatus SignalStatusWithNA, ifSonetLineRxSignalStatus SignalStatusWithNA, ifSonetLineRxAlarmIndicationSignal FaultStatusWithNA, ifSonetLineRemoteDefectIndication FaultStatusWithNA, ifSonetLineTxAlarmIndicationSignal FaultStatusWithNA } ifSonetLineIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An index assigned to each entry. " ::= { ifSonetLineEntry 1 } ifSonetLineName OBJECT-TYPE SYNTAX MgmtNameString MAX-ACCESS read-only STATUS current DESCRIPTION "The management name of the Sonet line, for example 'line:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. " ::= { ifSonetLineEntry 2 } ifSonetLineConnIfBasicIfIndex OBJECT-TYPE SYNTAX Unsigned32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "An index that describes to which index in ifBasicIf table this object is related. " ::= { ifSonetLineEntry 3 } ifSonetLineOhTransparencyBitmask OBJECT-TYPE SYNTAX Unsigned32WithNA MAX-ACCESS read-only STATUS current DESCRIPTION "The OH transparency bitmask. Bits: B2 = 0x01 E2 = 0x02 D4-D12 = 0x04 K1-K2 = 0x08 " DEFVAL { 0 } ::= { ifSonetLineEntry 4 } ifSonetLineTxSignalStatus OBJECT-TYPE SYNTAX SignalStatusWithNA MAX-ACCESS read-only STATUS current DESCRIPTION "The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. " ::= { ifSonetLineEntry 5 } ifSonetLineRxSignalStatus OBJECT-TYPE SYNTAX SignalStatusWithNA MAX-ACCESS read-only STATUS current DESCRIPTION "The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. " ::= { ifSonetLineEntry 6 } ifSonetLineRxAlarmIndicationSignal OBJECT-TYPE SYNTAX FaultStatusWithNA MAX-ACCESS read-only STATUS current DESCRIPTION "Rx Line alarm indication signal (AIS). Reference: GR-253/6.2.1.2.1 alarm: An line AIS signal is detected. ok: The line AIS is cleared. " ::= { ifSonetLineEntry 7 } ifSonetLineRemoteDefectIndication OBJECT-TYPE SYNTAX FaultStatusWithNA MAX-ACCESS read-only STATUS current DESCRIPTION "Rx Line remote defect indication (RDI). Reference: GR-253/6.2.1.3 alarm: RDI indication (in frame) active. ok: RDI indication inactive. " ::= { ifSonetLineEntry 8 } ifSonetLineTxAlarmIndicationSignal OBJECT-TYPE SYNTAX FaultStatusWithNA MAX-ACCESS read-only STATUS current DESCRIPTION "Tx Line alarm indication signal (AIS). Reference: GR-253/6.2.1.2.1 alarm: An line AIS signal is detected. ok: The line AIS is cleared. " ::= { ifSonetLineEntry 9 } -- ---------------------------------------------------- -- Notifications -- ---------------------------------------------------- -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- ifSonetGeneralGroupV1 OBJECT-GROUP OBJECTS { ifSonetGeneralConfigLastChangeTime, ifSonetGeneralStateLastChangeTime, ifSonetGeneralIfSonetSectionTableSize, ifSonetGeneralIfSonetSectionConfigLastChangeTime, ifSonetGeneralIfSonetSectionStateLastChangeTime, ifSonetGeneralIfSonetLineTableSize, ifSonetGeneralIfSonetLineConfigLastChangeTime, ifSonetGeneralIfSonetLineStateLastChangeTime } STATUS current DESCRIPTION "The general objects." ::= { lumIfSonetGroups 1 } ifSonetSectionGroupV1 OBJECT-GROUP OBJECTS { ifSonetSectionIndex, ifSonetSectionName, ifSonetSectionConnIfBasicIfIndex, ifSonetSectionOhTransparencyBitmask, ifSonetSectionTraceTransmitted, ifSonetSectionTraceReceived, ifSonetSectionTraceExpected, ifSonetSectionTraceAlarmMode, ifSonetSectionTxSignalStatus, ifSonetSectionRxSignalStatus, ifSonetSectionTraceMismatch, ifSonetSectionLossOfFrame } STATUS deprecated DESCRIPTION "The ifSonet SECTION objects (R20.0)." ::= { lumIfSonetGroups 2 } ifSonetLineGroupV1 OBJECT-GROUP OBJECTS { ifSonetLineIndex, ifSonetLineName, ifSonetLineConnIfBasicIfIndex, ifSonetLineOhTransparencyBitmask, ifSonetLineTxSignalStatus, ifSonetLineRxSignalStatus, ifSonetLineRxAlarmIndicationSignal, ifSonetLineRemoteDefectIndication } STATUS deprecated DESCRIPTION "The ifSonet LINE objects (R20.0)." ::= { lumIfSonetGroups 3 } ifSonetLineGroupV2 OBJECT-GROUP OBJECTS { ifSonetLineIndex, ifSonetLineName, ifSonetLineConnIfBasicIfIndex, ifSonetLineOhTransparencyBitmask, ifSonetLineTxSignalStatus, ifSonetLineRxSignalStatus, ifSonetLineRxAlarmIndicationSignal, ifSonetLineRemoteDefectIndication, ifSonetLineTxAlarmIndicationSignal } STATUS current DESCRIPTION "The ifSonet LINE objects (R24.0)." ::= { lumIfSonetGroups 4 } ifSonetSectionGroupV2 OBJECT-GROUP OBJECTS { ifSonetSectionIndex, ifSonetSectionName, ifSonetSectionConnIfBasicIfIndex, ifSonetSectionOhTransparencyBitmask, ifSonetSectionTraceTransmitted, ifSonetSectionTraceReceived, ifSonetSectionTraceExpected, ifSonetSectionTraceAlarmMode, ifSonetSectionTxSignalStatus, ifSonetSectionRxSignalStatus, ifSonetSectionTraceMismatch, ifSonetSectionLossOfFrame, ifSonetSectionTxLossOfFrame } STATUS current DESCRIPTION "The ifSonet SECTION objects (R24.0)." ::= { lumIfSonetGroups 5 } -- ---------------------------------------------------- -- Compliance -- ---------------------------------------------------- lumIfSonetComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the ifSonet MIB. (R20.0)" MODULE MANDATORY-GROUPS { ifSonetGeneralGroupV1, ifSonetSectionGroupV1, ifSonetLineGroupV1 } ::= { lumIfSonetCompl 1 } lumIfSonetComplV2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the ifSonet MIB. (R24.0)" MODULE MANDATORY-GROUPS { ifSonetGeneralGroupV1, ifSonetSectionGroupV1, ifSonetLineGroupV2 } ::= { lumIfSonetCompl 2 } lumIfSonetComplV3 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the ifSonet MIB. (R24.0)" MODULE MANDATORY-GROUPS { ifSonetGeneralGroupV1, ifSonetSectionGroupV2, ifSonetLineGroupV2 } ::= { lumIfSonetCompl 3 } END