WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/maipu/MPVETH

861 lines
23 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

-- ============================================================================================
-- EPAS网管NB110E/FT160/NB110B/NB110F/NB110G mib库定义
--
-- ============================================================================================
MPVETH DEFINITIONS ::= BEGIN
IMPORTS
DisplayString FROM SNMPv2-TC
mpMgmt FROM MAIPU-SMI
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32
FROM SNMPv2-SMI;
-- ============================================================================================
-- VETH网管mib库定义
-- ============================================================================================
mpVeth MODULE-IDENTITY
LAST-UPDATED "0101050000Z"
ORGANIZATION "Maipu DataComm"
CONTACT-INFO
" Maipu DataComm
Customer Service
Postal: Consulate Drive
Chengdu, Sichuan 610041
China
Tel: 86-028-5161006
E-mail: office@maipu.com"
DESCRIPTION
"The process and memory information of MP2600 infomation!"
::= { mpMgmt 499 }
-- ============================================================================================
-- TRAP
-- ============================================================================================
VethTrap OBJECT IDENTIFIER ::= {mpVeth 0}
VethMemberIfMultiIDTrapNotify OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"虚拟以太成员接口收到多个对端ID的告警信息"
::= {VethTrap 1}
VethMemberIfLoopTrapNotify OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"虚拟以太成员接口环回告警信息"
::= {VethTrap 2}
-- ============================================================================================
-- EPAS网管远端设备 mib库定义
-- ============================================================================================
mpVethRemoteType MODULE-IDENTITY
LAST-UPDATED "0101050000Z"
ORGANIZATION "Maipu DataComm"
CONTACT-INFO
" Maipu DataComm
Customer Service
Postal: Consulate Drive
Chengdu, Sichuan 610041
China
Tel: 86-028-5161006
E-mail: office@maipu.com"
DESCRIPTION
"The process and memory information of MP2600 infomation!"
::= { mpVeth 1 }
-- ============================================================================================
-- ============================================================================================
VethRemoteType OBJECT IDENTIFIER ::= {mpVethRemoteType 1}
VethRemoteTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VethRemoteTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"远端设备类型状态"
::= {VethRemoteType 1}
VethRemoteTypeEntry OBJECT-TYPE
SYNTAX VethRemoteTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"远端设备类型状态表项"
INDEX {VethRemoteTypeIndex}
::= {VethRemoteTypeTable 1}
VethRemoteTypeIndex OBJECT-TYPE
SYNTAX INTEGER(1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"接口索引"
::= {VethRemoteTypeEntry 1}
VethDeviceType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"远端设备类型 0x00:无设备 0x01: Old-NB110B 0x02: New-NB110B 0x03:NB110E 0x04:NB110F 0x05:FT160 0x06:NB110G 0x10:Router 0x11:EPAS"
::= {VethRemoteTypeEntry 2}
VethDeviceState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"远端设备状态（Alive/Dead) 1:Alive,0:Dead"
::= {VethRemoteTypeEntry 3}
-- ============================================================================================
-- EPAS网管NB110E mib库定义
-- ============================================================================================
mpNB110 MODULE-IDENTITY
LAST-UPDATED "0101050000Z"
ORGANIZATION "Maipu DataComm"
CONTACT-INFO
" Maipu DataComm
Customer Service
Postal: Consulate Drive
Chengdu, Sichuan 610041
China
Tel: 86-028-5161006
E-mail: office@maipu.com"
DESCRIPTION
"The process and memory information of MP2600 infomation!"
::= { mpVeth 2 }
-- ============================================================================================
-- EPAS网管NB110 mib库定义
-- ============================================================================================
NB110 OBJECT IDENTIFIER ::= {mpNB110 1}
NB110Table OBJECT-TYPE
SYNTAX SEQUENCE OF NB110Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"NB110配置"
::= {NB110 1}
NB110Entry OBJECT-TYPE
SYNTAX NB110Entry
ACCESS not-accessible
STATUS current
DESCRIPTION
"NB110配置表项"
INDEX {NB110Index}
::= {NB110Table 1}
NB110Index OBJECT-TYPE
SYNTAX INTEGER(1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"接口索引"
::= {NB110Entry 1}
NB110Conf OBJECT-TYPE
SYNTAX INTEGER(1..2)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"远端配置使能： 1:不配置； 2:配置"
::= {NB110Entry 2}
NB110Ether OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"以太时隙配置：第一字节：起始时隙； 第二字节：时隙数"
::= {NB110Entry 3}
NB110V35 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"V35时隙配置：第一字节：起始时隙； 第二字节：时隙数"
::= {NB110Entry 4}
NB110OtherConf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"bit0:系统时钟；bit1:广域网通道检测；bit2:G703阻抗； bit3:以太全双工；bit4:10/100M设置； bit5:自动协商； bit6:V35发送时钟反转；bit7:V35接收时钟反转"
::= {NB110Entry 5}
NB110Res1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"保留字段1"
::= {NB110Entry 6}
NB110Res2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"保留字段2"
::= {NB110Entry 7}
NB110RemoteStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF NB110RemoteStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"远端设备状态表"
::= {NB110 2}
NB110RemoteStatusEntry OBJECT-TYPE
SYNTAX NB110RemoteStatusEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"远端设备状态表项"
INDEX {NB110RemoteStatusIndex}
::= {NB110RemoteStatusTable 1}
NB110RemoteStatusIndex OBJECT-TYPE
SYNTAX INTEGER(1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"接口索引"
::= {NB110RemoteStatusEntry 1}
NB110RemoteStatus1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"第一字节代表远端设备类型：0:没有远端设备 1:老NB110B; 2:新NB110B; 3:NB110E;(若为0和1,则下面的字节无意义）； 第二、三、四字节分别代表DIP开关1、2、3的状态，一个bit代表一个开关；"
::= {NB110RemoteStatusEntry 2}
NB110RemoteStatus2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"第一、二、三字节分别代表DIP开关4、5、6的状态，一个bit代表一个开关； 若远端为老NB110B,则这个整数的四个字节表示其远端状态 第四字节保留"
::= {NB110RemoteStatusEntry 3}
NB110RemoteStatus3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"第一字节：远端设备以及E1灯状态，从最低bit开始，分别有：AIS、LOS、RCL、LOOP、SLT、PWR,其他bit位保留； 第二字节：V35灯状态，从低bit位开始，目前有：TXD、RXD、DCD、CTS、RTS、DSR、DTR,其他bit位保留； 第三、四字节保留"
::= {NB110RemoteStatusEntry 4}
NB110RemoteStatus4 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"第一字节：以太灯状态，从低bit开始，目前有：WANCHL-1、FDX-1、100M-1、LINK/ACT-1、WANCHL-0、FDX-0、100M-0、LINK/ACT-0; 第二、三、四字节保留；"
::= {NB110RemoteStatusEntry 5}
-- ============================================================================================
-- EPAS网管FT160 mib库定义
-- ============================================================================================
mpFT160 MODULE-IDENTITY
LAST-UPDATED "0101050000Z"
ORGANIZATION "Maipu DataComm"
CONTACT-INFO
" Maipu DataComm
Customer Service
Postal: Consulate Drive
Chengdu, Sichuan 610041
China
Tel: 86-028-5161006
E-mail: office@maipu.com"
DESCRIPTION
"The process and memory information of MP2600 infomation!"
::= { mpVeth 3 }
-- ============================================================================================
-- EPAS网管FT160 mib库定义
-- ============================================================================================
FT160 OBJECT IDENTIFIER ::= {mpFT160 1}
FT160Table OBJECT-TYPE
SYNTAX SEQUENCE OF FT160Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"FT160参数配置信息"
::= {FT160 1}
FT160Entry OBJECT-TYPE
SYNTAX FT160Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"FT160端口表的表项"
INDEX {FT160Index}
::= {FT160Table 1}
FT160Index OBJECT-TYPE
SYNTAX INTEGER(1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"接口索引"
::= {FT160Entry 1}
FT160Conf OBJECT-TYPE
SYNTAX INTEGER(1..2)
ACCESS read-write
STATUS current
DESCRIPTION
"远端配置使能 1:不配置; 2:配置"
::= {FT160Entry 2}
FT160ClkSrc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"FT160时钟 1:内时钟; 2:光口时钟; 3:V35外时钟; 4:E1外时钟; FT160B-1FESAC只能配1,2"
::= {FT160Entry 3}
FT160EtherDuplex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"以太口的工作模式 bit2:以太全双工(0:half,1:full) bit1:10/100M设置(0:10,1:100) bit0:自动协商(0:非自,1:自动"
::= {FT160Entry 4}
FT160ChannelNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"通道装载数 Bit7-Bit6: V35通道 00:不装载,01:装载; Bit5-bit3: E1通道 000:不装载,001:1,010:2,011:3,100:4; Bit2-bit0: 以太通道 000:不装载,001:1,010:2,011:3,100:4"
::= {FT160Entry 5}
FT160LoopMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"FT160环回方式 Bit2: V35环回 00:不环回, 01:环回 Bit1-bit0: 光口环回 00:不环回, 01:LL环, 10:RL环, 11:双向环"
::= {FT160Entry 6}
FT160V35Config OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"V35配置 BIT7: V35发送时钟(1:反转, 0:不反转) BIT6: V35接收时钟(1:反转, 0:不反转) BIT5: DTE/DCE设备选择(1:DTE, 0:DCE) BIT4-BIT0: V35带宽选择(00000--11111)x64K,其中00000表示2M(在装载了V35通道后才有效)"
::= {FT160Entry 7}
FT160E1Config OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"E1配置 BIT1: 阻抗设置(1:120, 0:75) BIT0: E1 RESET(0:不RESET, 1:RESET)"
::= {FT160Entry 8}
FT160E1LoopMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"E1环回 Bit7-Bit6: E11(00:不环回, 01:LL环, 10:RL环, 11:双向环) Bit5-bit4: E12(00:不环回, 01:LL环, 10:RL环, 11:双向环) Bit3-bit2: E13(00:不环回, 01:LL环, 10:RL环, 11:双向环) Bit1-bit0: E14(00:不环回, 01:LL环, 10:RL环, 11:双向环)"
::= {FT160Entry 9}
FT160Res1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"保留"
::= {FT160Entry 10}
FT160Res2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"保留"
::= {FT160Entry 11}
FT160Cmd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"FT160远端复位 1:复位 0:不复位"
::= {FT160Entry 12}
FT160RemoteStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF FT160RemoteStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"FT160状态信息表"
::= {FT160 2}
FT160RemoteStatusEntry OBJECT-TYPE
SYNTAX FT160RemoteStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"FT160状态表项"
INDEX {FT160RemoteStatusIndex}
::= {FT160RemoteStatusTable 1}
FT160RemoteStatusIndex OBJECT-TYPE
SYNTAX INTEGER(1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"接口索引"
::= {FT160RemoteStatusEntry 1}
FT160Type OBJECT-TYPE
SYNTAX INTEGER(0..10)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FT160类型 0: 无设备 1: 老NB110B 2: 新NB110B 3: NB110E 4: NB110F 5: FT160B-1FESAC"
::= {FT160RemoteStatusEntry 2}
FT160Dip OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FT160 DIP 三组DIP开关,FT160B-1FESAC的DIP开关一组4位,我们仍用8位来表示,用高4位,低4位保留"
::= {FT160RemoteStatusEntry 3}
FT160Led1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FT160 LED灯状态 PWR, SLT, SD, ALM, ACT, LINK, 100M, FDX(从低到高BIT0--BIT7)"
::= {FT160RemoteStatusEntry 4}
FT160Led2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FT160 LED灯状态(保留)"
::= {FT160RemoteStatusEntry 5}
FT160HwVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"远端FT160硬件版本号是以三位的16进制形式进行显示，比如FT160HwVersion取值为48, 则显示硬件版本号位030。"
::= {FT160RemoteStatusEntry 6}
FT160SwVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"远端FT160软件版本号是以三位的十进制形式进行显示，比如FT160SwVersion取值为48, 则显示软件版本号位048。"
::= {FT160RemoteStatusEntry 7}
FT160FpgaVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"远端FT160的FPGA版本号是以三位的十进制形式进行显示，比如FT160FpgaVersion取值为48, 则显示FPGA版本号位048。"
::= {FT160RemoteStatusEntry 8}
FT160ClkSrc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FT160时钟源方式 1:内时钟 2:光口时钟 3:V35外时钟 4:E1外时钟"
::= {FT160RemoteStatusEntry 9}
FT160ChannelNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FT160通道装载数 Bit7-Bit6: V35通道(00:不装载, 01:装载) Bit5-bit3: E1通道(000:不装载, 001:1, 010:2, 011:3, 100:4) Bit2-bit0: 以太通道(000:不装载, 001:1, 010:2, 011:3, 100:4)"
::= {FT160RemoteStatusEntry 10}
FT160V35Status OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"V35状态 BIT7: V35发送时钟(1:反转, 0:不反转) BIT6: V35接收时钟(1:反转, 0:不反转) BIT5: DTE/DCE设备选择(1:DTE, 0:DCE) BIT4-BIT0: V35带宽选择(00000--11111)x64K,其中00000表示2M(在装载了V35通道后才有效)"
::= {FT160RemoteStatusEntry 11}
FT160SysMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FT160工作模式 0:非正常模式 1:DIP模式 2:远程网管模式"
::= {FT160RemoteStatusEntry 12}
FT160E1Status OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FT160 E1状态 BIT1: E1阻抗(1:120, 0:75) BIT0: E1 CarryWave(0:同步, 1:不同步)"
::= {FT160RemoteStatusEntry 13}
FT160LoopMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"环回模式 Bit2: V35环回(00:不环回, 01:环回) Bit1-bit0: 光口环回(00:不环回, 01:LL环, 10:RL环, 11:双向环)"
::= {FT160RemoteStatusEntry 14}
FT160E1LoopMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"E1环回模式 Bit7-Bit6: E11(00:不环回, 01:LL环, 10:RL环, 11:双向环) Bit5-bit4: E12(00:不环回, 01:LL环, 10:RL环, 11:双向环) Bit3-bit2: E13(00:不环回，01:LL环, 10:RL环, 11:双向环) Bit1-bit0: E14(00:不环回，01:LL环, 10:RL环, 11:双向环)"
::= {FT160RemoteStatusEntry 15}
FT160EtherStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"以太口状态 bit2: 以太全双工(0:half, 1:full) bit1: 10/100M设置(0:10M, 1:100M) bit0: 自动协商(0:非自, 1:自动)"
::= {FT160RemoteStatusEntry 16}
FT160Res1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"保留"
::= {FT160RemoteStatusEntry 17}
FT160Res2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"保留"
::= {FT160RemoteStatusEntry 18}
-- ============================================================================================
-- EPAS网管NB110G mib库定义
-- ============================================================================================
mpNB110G MODULE-IDENTITY
LAST-UPDATED "0101050000Z"
ORGANIZATION "Maipu DataComm"
CONTACT-INFO
" Maipu DataComm
Customer Service
Postal: Consulate Drive
Chengdu, Sichuan 610041
China
Tel: 86-028-5161006
E-mail: office@maipu.com"
DESCRIPTION
"The process and memory information of MP2600 infomation!"
::= { mpVeth 4 }
-- ============================================================================================
-- EPAS网管NB110G mib库定义
-- ============================================================================================
NB110G OBJECT IDENTIFIER ::= {mpNB110G 1}
NB110GGlobal OBJECT IDENTIFIER ::= {mpNB110G 2}
NB110GConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF NB110GConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"NB110G参数配置"
::= {NB110G 1}
NB110GConfEntry OBJECT-TYPE
SYNTAX NB110GConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"NB110G配置表项"
INDEX {NB110GIndex}
::= {NB110GConfTable 1}
NB110GIndex OBJECT-TYPE
SYNTAX INTEGER(1..14)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"接口索引"
::= {NB110GConfEntry 1}
NB110GConfig OBJECT-TYPE
SYNTAX INTEGER(1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"配置使能 1:不配置; 2:配置"
::= {NB110GConfEntry 2}
NB110GClock OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"线路时钟 0:内时钟； 1:外时钟"
::= {NB110GConfEntry 3}
NB110GE1Impedance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"线路阻抗 0:120欧； 1:75欧"
::= {NB110GConfEntry 4}
NB110GEtherProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"以太口是否自动协商 0:关闭； 1:打开"
::= {NB110GConfEntry 5}
NB110GEtherRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"以太口的工作速率 0:10M; 1:100M"
::= {NB110GConfEntry 6}
NB110GEtherDuplex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"以太口的工作模式 0:全双工； 1:半双工"
::= {NB110GConfEntry 7}
NB110GRes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"保留"
::= {NB110GConfEntry 8}
NB110GLoop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"环回模式"
::= {NB110GConfEntry 9}
NB110GRemoteStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF NB110GRemoteStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"NB110G状态信息"
::= {NB110G 2}
NB110GRemoteStatusEntry OBJECT-TYPE
SYNTAX NB110GRemoteStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"NB110G远端状态表项"
INDEX {NB110GIndex}
::= {NB110GRemoteStatusTable 1}
NB110GIndex OBJECT-TYPE
SYNTAX INTEGER(1..14)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"接口索引"
::= {NB110GRemoteStatusEntry 1}
NB110GType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"对端设备类型"
::= {NB110GRemoteStatusEntry 2}
NB110GDip1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"开关1 0:ON,1:OFF"
::= {NB110GRemoteStatusEntry 3}
NB110GDip2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"开关2 0:ON,1:OFF"
::= {NB110GRemoteStatusEntry 4}
NB110GLED1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"PWR 0:ON,1:OFF"
::= {NB110GRemoteStatusEntry 5}
NB110GE1LED OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"E1灯 0:ON,1:OFF"
::= {NB110GRemoteStatusEntry 6}
NB110GEtherLED OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"ethernet灯 0:ON,1:OFF"
::= {NB110GRemoteStatusEntry 7}
NB110GLoopLED OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Loop灯 0:ON,1:OFF"
::= {NB110GRemoteStatusEntry 8}
NB110GClock OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"时钟模式 0:内时钟；1:外时钟"
::= {NB110GRemoteStatusEntry 9}
NB110GE1Impedance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"线路阻抗 0:120欧；1:75欧"
::= {NB110GRemoteStatusEntry 10}
NB110GEtherProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"以太口是否自动协商 0:关闭；1:打开"
::= {NB110GRemoteStatusEntry 11}
NB110GEtherRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"以太口的工作速率 0:10M;1:100M"
::= {NB110GRemoteStatusEntry 12}
NB110GEtherDuplex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"以太口的工作模式 0:全双工；1:半双工"
::= {NB110GRemoteStatusEntry 13}
NB110GMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"运行模式 0:正常运行；1:远端环回"
::= {NB110GRemoteStatusEntry 14}
NB110GhwVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"NB110G的硬件ID号，用3个字节表示(低字节表示低位字符,高字节表示高位字符)。 在网管界面上需要用字符形式表示硬件版本号。"
::= {NB110GRemoteStatusEntry 15}
NB110GswVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"NB110G的软件ID号"
::= {NB110GRemoteStatusEntry 16}
NB110GFPGAVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"NB110G的FPGA号"
::= {NB110GRemoteStatusEntry 17}
NB110GResetIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"接口索引"
::= {NB110GGlobal 1}
END
View Git Blame Copy Permalink