-- ============================================================================================ -- EPAS网管NB110E/FT160/NB110B/NB110F/NB110G mib库定义 -- -- ============================================================================================ MPVETH DEFINITIONS ::= BEGIN IMPORTS DisplayString FROM SNMPv2-TC mpMgmt FROM MAIPU-SMI MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI; -- ============================================================================================ -- VETH网管mib库定义 -- ============================================================================================ mpVeth MODULE-IDENTITY LAST-UPDATED "0101050000Z" ORGANIZATION "Maipu DataComm" CONTACT-INFO " Maipu DataComm Customer Service Postal: Consulate Drive Chengdu, Sichuan 610041 China Tel: 86-028-5161006 E-mail: office@maipu.com" DESCRIPTION "The process and memory information of MP2600 infomation!" ::= { mpMgmt 499 } -- ============================================================================================ -- TRAP -- ============================================================================================ VethTrap OBJECT IDENTIFIER ::= {mpVeth 0} VethMemberIfMultiIDTrapNotify OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "虚拟以太成员接口收到多个对端ID的告警信息" ::= {VethTrap 1} VethMemberIfLoopTrapNotify OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "虚拟以太成员接口环回告警信息" ::= {VethTrap 2} -- ============================================================================================ -- EPAS网管远端设备 mib库定义 -- ============================================================================================ mpVethRemoteType MODULE-IDENTITY LAST-UPDATED "0101050000Z" ORGANIZATION "Maipu DataComm" CONTACT-INFO " Maipu DataComm Customer Service Postal: Consulate Drive Chengdu, Sichuan 610041 China Tel: 86-028-5161006 E-mail: office@maipu.com" DESCRIPTION "The process and memory information of MP2600 infomation!" ::= { mpVeth 1 } -- ============================================================================================ -- ============================================================================================ VethRemoteType OBJECT IDENTIFIER ::= {mpVethRemoteType 1} VethRemoteTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF VethRemoteTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "远端设备类型状态" ::= {VethRemoteType 1} VethRemoteTypeEntry OBJECT-TYPE SYNTAX VethRemoteTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "远端设备类型状态表项" INDEX {VethRemoteTypeIndex} ::= {VethRemoteTypeTable 1} VethRemoteTypeIndex OBJECT-TYPE SYNTAX INTEGER(1..16) ACCESS read-only STATUS mandatory DESCRIPTION "接口索引" ::= {VethRemoteTypeEntry 1} VethDeviceType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "远端设备类型 0x00:无设备 0x01: Old-NB110B 0x02: New-NB110B 0x03:NB110E 0x04:NB110F 0x05:FT160 0x06:NB110G 0x10:Router 0x11:EPAS" ::= {VethRemoteTypeEntry 2} VethDeviceState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "远端设备状态（Alive/Dead) 1:Alive,0:Dead" ::= {VethRemoteTypeEntry 3} -- ============================================================================================ -- EPAS网管NB110E mib库定义 -- ============================================================================================ mpNB110 MODULE-IDENTITY LAST-UPDATED "0101050000Z" ORGANIZATION "Maipu DataComm" CONTACT-INFO " Maipu DataComm Customer Service Postal: Consulate Drive Chengdu, Sichuan 610041 China Tel: 86-028-5161006 E-mail: office@maipu.com" DESCRIPTION "The process and memory information of MP2600 infomation!" ::= { mpVeth 2 } -- ============================================================================================ -- EPAS网管NB110 mib库定义 -- ============================================================================================ NB110 OBJECT IDENTIFIER ::= {mpNB110 1} NB110Table OBJECT-TYPE SYNTAX SEQUENCE OF NB110Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "NB110配置" ::= {NB110 1} NB110Entry OBJECT-TYPE SYNTAX NB110Entry ACCESS not-accessible STATUS current DESCRIPTION "NB110配置表项" INDEX {NB110Index} ::= {NB110Table 1} NB110Index OBJECT-TYPE SYNTAX INTEGER(1..16) ACCESS read-only STATUS mandatory DESCRIPTION "接口索引" ::= {NB110Entry 1} NB110Conf OBJECT-TYPE SYNTAX INTEGER(1..2) ACCESS read-write STATUS mandatory DESCRIPTION "远端配置使能： 1:不配置； 2:配置" ::= {NB110Entry 2} NB110Ether OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "以太时隙配置：第一字节：起始时隙； 第二字节：时隙数" ::= {NB110Entry 3} NB110V35 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "V35时隙配置：第一字节：起始时隙； 第二字节：时隙数" ::= {NB110Entry 4} NB110OtherConf OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bit0:系统时钟；bit1:广域网通道检测；bit2:G703阻抗； bit3:以太全双工；bit4:10/100M设置； bit5:自动协商； bit6:V35发送时钟反转；bit7:V35接收时钟反转" ::= {NB110Entry 5} NB110Res1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "保留字段1" ::= {NB110Entry 6} NB110Res2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "保留字段2" ::= {NB110Entry 7} NB110RemoteStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF NB110RemoteStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "远端设备状态表" ::= {NB110 2} NB110RemoteStatusEntry OBJECT-TYPE SYNTAX NB110RemoteStatusEntry ACCESS not-accessible STATUS current DESCRIPTION "远端设备状态表项" INDEX {NB110RemoteStatusIndex} ::= {NB110RemoteStatusTable 1} NB110RemoteStatusIndex OBJECT-TYPE SYNTAX INTEGER(1..16) ACCESS read-only STATUS mandatory DESCRIPTION "接口索引" ::= {NB110RemoteStatusEntry 1} NB110RemoteStatus1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "第一字节代表远端设备类型：0:没有远端设备 1:老NB110B; 2:新NB110B; 3:NB110E;(若为0和1,则下面的字节无意义）； 第二、三、四字节分别代表DIP开关1、2、3的状态，一个bit代表一个开关；" ::= {NB110RemoteStatusEntry 2} NB110RemoteStatus2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "第一、二、三字节分别代表DIP开关4、5、6的状态，一个bit代表一个开关； 若远端为老NB110B,则这个整数的四个字节表示其远端状态 第四字节保留" ::= {NB110RemoteStatusEntry 3} NB110RemoteStatus3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "第一字节：远端设备以及E1灯状态，从最低bit开始，分别有：AIS、LOS、RCL、LOOP、SLT、PWR,其他bit位保留； 第二字节：V35灯状态，从低bit位开始，目前有：TXD、RXD、DCD、CTS、RTS、DSR、DTR,其他bit位保留； 第三、四字节保留" ::= {NB110RemoteStatusEntry 4} NB110RemoteStatus4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "第一字节：以太灯状态，从低bit开始，目前有：WANCHL-1、FDX-1、100M-1、LINK/ACT-1、WANCHL-0、FDX-0、100M-0、LINK/ACT-0; 第二、三、四字节保留；" ::= {NB110RemoteStatusEntry 5} -- ============================================================================================ -- EPAS网管FT160 mib库定义 -- ============================================================================================ mpFT160 MODULE-IDENTITY LAST-UPDATED "0101050000Z" ORGANIZATION "Maipu DataComm" CONTACT-INFO " Maipu DataComm Customer Service Postal: Consulate Drive Chengdu, Sichuan 610041 China Tel: 86-028-5161006 E-mail: office@maipu.com" DESCRIPTION "The process and memory information of MP2600 infomation!" ::= { mpVeth 3 } -- ============================================================================================ -- EPAS网管FT160 mib库定义 -- ============================================================================================ FT160 OBJECT IDENTIFIER ::= {mpFT160 1} FT160Table OBJECT-TYPE SYNTAX SEQUENCE OF FT160Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "FT160参数配置信息" ::= {FT160 1} FT160Entry OBJECT-TYPE SYNTAX FT160Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "FT160端口表的表项" INDEX {FT160Index} ::= {FT160Table 1} FT160Index OBJECT-TYPE SYNTAX INTEGER(1..16) ACCESS read-only STATUS mandatory DESCRIPTION "接口索引" ::= {FT160Entry 1} FT160Conf OBJECT-TYPE SYNTAX INTEGER(1..2) ACCESS read-write STATUS current DESCRIPTION "远端配置使能 1:不配置; 2:配置" ::= {FT160Entry 2} FT160ClkSrc OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "FT160时钟 1:内时钟; 2:光口时钟; 3:V35外时钟; 4:E1外时钟; FT160B-1FESAC只能配1,2" ::= {FT160Entry 3} FT160EtherDuplex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "以太口的工作模式 bit2:以太全双工(0:half,1:full) bit1:10/100M设置(0:10,1:100) bit0:自动协商(0:非自,1:自动" ::= {FT160Entry 4} FT160ChannelNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "通道装载数 Bit7-Bit6: V35通道 00:不装载,01:装载; Bit5-bit3: E1通道 000:不装载,001:1,010:2,011:3,100:4; Bit2-bit0: 以太通道 000:不装载,001:1,010:2,011:3,100:4" ::= {FT160Entry 5} FT160LoopMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "FT160环回方式 Bit2: V35环回 00:不环回, 01:环回 Bit1-bit0: 光口环回 00:不环回, 01:LL环, 10:RL环, 11:双向环" ::= {FT160Entry 6} FT160V35Config OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "V35配置 BIT7: V35发送时钟(1:反转, 0:不反转) BIT6: V35接收时钟(1:反转, 0:不反转) BIT5: DTE/DCE设备选择(1:DTE, 0:DCE) BIT4-BIT0: V35带宽选择(00000--11111)x64K,其中00000表示2M(在装载了V35通道后才有效)" ::= {FT160Entry 7} FT160E1Config OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "E1配置 BIT1: 阻抗设置(1:120, 0:75) BIT0: E1 RESET(0:不RESET, 1:RESET)" ::= {FT160Entry 8} FT160E1LoopMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "E1环回 Bit7-Bit6: E11(00:不环回, 01:LL环, 10:RL环, 11:双向环) Bit5-bit4: E12(00:不环回, 01:LL环, 10:RL环, 11:双向环) Bit3-bit2: E13(00:不环回, 01:LL环, 10:RL环, 11:双向环) Bit1-bit0: E14(00:不环回, 01:LL环, 10:RL环, 11:双向环)" ::= {FT160Entry 9} FT160Res1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "保留" ::= {FT160Entry 10} FT160Res2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "保留" ::= {FT160Entry 11} FT160Cmd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "FT160远端复位 1:复位 0:不复位" ::= {FT160Entry 12} FT160RemoteStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FT160RemoteStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "FT160状态信息表" ::= {FT160 2} FT160RemoteStatusEntry OBJECT-TYPE SYNTAX FT160RemoteStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "FT160状态表项" INDEX {FT160RemoteStatusIndex} ::= {FT160RemoteStatusTable 1} FT160RemoteStatusIndex OBJECT-TYPE SYNTAX INTEGER(1..16) ACCESS read-only STATUS mandatory DESCRIPTION "接口索引" ::= {FT160RemoteStatusEntry 1} FT160Type OBJECT-TYPE SYNTAX INTEGER(0..10) ACCESS read-only STATUS mandatory DESCRIPTION "FT160类型 0: 无设备 1: 老NB110B 2: 新NB110B 3: NB110E 4: NB110F 5: FT160B-1FESAC" ::= {FT160RemoteStatusEntry 2} FT160Dip OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "FT160 DIP 三组DIP开关,FT160B-1FESAC的DIP开关一组4位,我们仍用8位来表示,用高4位,低4位保留" ::= {FT160RemoteStatusEntry 3} FT160Led1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "FT160 LED灯状态 PWR, SLT, SD, ALM, ACT, LINK, 100M, FDX(从低到高BIT0--BIT7)" ::= {FT160RemoteStatusEntry 4} FT160Led2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "FT160 LED灯状态(保留)" ::= {FT160RemoteStatusEntry 5} FT160HwVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "远端FT160硬件版本号是以三位的16进制形式进行显示，比如FT160HwVersion取值为48, 则显示硬件版本号位030。" ::= {FT160RemoteStatusEntry 6} FT160SwVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "远端FT160软件版本号是以三位的十进制形式进行显示，比如FT160SwVersion取值为48, 则显示软件版本号位048。" ::= {FT160RemoteStatusEntry 7} FT160FpgaVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "远端FT160的FPGA版本号是以三位的十进制形式进行显示，比如FT160FpgaVersion取值为48, 则显示FPGA版本号位048。" ::= {FT160RemoteStatusEntry 8} FT160ClkSrc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "FT160时钟源方式 1:内时钟 2:光口时钟 3:V35外时钟 4:E1外时钟" ::= {FT160RemoteStatusEntry 9} FT160ChannelNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "FT160通道装载数 Bit7-Bit6: V35通道(00:不装载, 01:装载) Bit5-bit3: E1通道(000:不装载, 001:1, 010:2, 011:3, 100:4) Bit2-bit0: 以太通道(000:不装载, 001:1, 010:2, 011:3, 100:4)" ::= {FT160RemoteStatusEntry 10} FT160V35Status OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "V35状态 BIT7: V35发送时钟(1:反转, 0:不反转) BIT6: V35接收时钟(1:反转, 0:不反转) BIT5: DTE/DCE设备选择(1:DTE, 0:DCE) BIT4-BIT0: V35带宽选择(00000--11111)x64K,其中00000表示2M(在装载了V35通道后才有效)" ::= {FT160RemoteStatusEntry 11} FT160SysMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "FT160工作模式 0:非正常模式 1:DIP模式 2:远程网管模式" ::= {FT160RemoteStatusEntry 12} FT160E1Status OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "FT160 E1状态 BIT1: E1阻抗(1:120, 0:75) BIT0: E1 CarryWave(0:同步, 1:不同步)" ::= {FT160RemoteStatusEntry 13} FT160LoopMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "环回模式 Bit2: V35环回(00:不环回, 01:环回) Bit1-bit0: 光口环回(00:不环回, 01:LL环, 10:RL环, 11:双向环)" ::= {FT160RemoteStatusEntry 14} FT160E1LoopMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "E1环回模式 Bit7-Bit6: E11(00:不环回, 01:LL环, 10:RL环, 11:双向环) Bit5-bit4: E12(00:不环回, 01:LL环, 10:RL环, 11:双向环) Bit3-bit2: E13(00:不环回，01:LL环, 10:RL环, 11:双向环) Bit1-bit0: E14(00:不环回，01:LL环, 10:RL环, 11:双向环)" ::= {FT160RemoteStatusEntry 15} FT160EtherStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "以太口状态 bit2: 以太全双工(0:half, 1:full) bit1: 10/100M设置(0:10M, 1:100M) bit0: 自动协商(0:非自, 1:自动)" ::= {FT160RemoteStatusEntry 16} FT160Res1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "保留" ::= {FT160RemoteStatusEntry 17} FT160Res2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "保留" ::= {FT160RemoteStatusEntry 18} -- ============================================================================================ -- EPAS网管NB110G mib库定义 -- ============================================================================================ mpNB110G MODULE-IDENTITY LAST-UPDATED "0101050000Z" ORGANIZATION "Maipu DataComm" CONTACT-INFO " Maipu DataComm Customer Service Postal: Consulate Drive Chengdu, Sichuan 610041 China Tel: 86-028-5161006 E-mail: office@maipu.com" DESCRIPTION "The process and memory information of MP2600 infomation!" ::= { mpVeth 4 } -- ============================================================================================ -- EPAS网管NB110G mib库定义 -- ============================================================================================ NB110G OBJECT IDENTIFIER ::= {mpNB110G 1} NB110GGlobal OBJECT IDENTIFIER ::= {mpNB110G 2} NB110GConfTable OBJECT-TYPE SYNTAX SEQUENCE OF NB110GConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NB110G参数配置" ::= {NB110G 1} NB110GConfEntry OBJECT-TYPE SYNTAX NB110GConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NB110G配置表项" INDEX {NB110GIndex} ::= {NB110GConfTable 1} NB110GIndex OBJECT-TYPE SYNTAX INTEGER(1..14) ACCESS read-only STATUS mandatory DESCRIPTION "接口索引" ::= {NB110GConfEntry 1} NB110GConfig OBJECT-TYPE SYNTAX INTEGER(1..4) ACCESS read-write STATUS mandatory DESCRIPTION "配置使能 1:不配置; 2:配置" ::= {NB110GConfEntry 2} NB110GClock OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "线路时钟 0:内时钟； 1:外时钟" ::= {NB110GConfEntry 3} NB110GE1Impedance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "线路阻抗 0:120欧； 1:75欧" ::= {NB110GConfEntry 4} NB110GEtherProtocol OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "以太口是否自动协商 0:关闭； 1:打开" ::= {NB110GConfEntry 5} NB110GEtherRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "以太口的工作速率 0:10M; 1:100M" ::= {NB110GConfEntry 6} NB110GEtherDuplex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "以太口的工作模式 0:全双工； 1:半双工" ::= {NB110GConfEntry 7} NB110GRes OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "保留" ::= {NB110GConfEntry 8} NB110GLoop OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "环回模式" ::= {NB110GConfEntry 9} NB110GRemoteStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF NB110GRemoteStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NB110G状态信息" ::= {NB110G 2} NB110GRemoteStatusEntry OBJECT-TYPE SYNTAX NB110GRemoteStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NB110G远端状态表项" INDEX {NB110GIndex} ::= {NB110GRemoteStatusTable 1} NB110GIndex OBJECT-TYPE SYNTAX INTEGER(1..14) ACCESS read-only STATUS mandatory DESCRIPTION "接口索引" ::= {NB110GRemoteStatusEntry 1} NB110GType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "对端设备类型" ::= {NB110GRemoteStatusEntry 2} NB110GDip1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "开关1 0:ON,1:OFF" ::= {NB110GRemoteStatusEntry 3} NB110GDip2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "开关2 0:ON,1:OFF" ::= {NB110GRemoteStatusEntry 4} NB110GLED1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "PWR 0:ON,1:OFF" ::= {NB110GRemoteStatusEntry 5} NB110GE1LED OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "E1灯 0:ON,1:OFF" ::= {NB110GRemoteStatusEntry 6} NB110GEtherLED OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "ethernet灯 0:ON,1:OFF" ::= {NB110GRemoteStatusEntry 7} NB110GLoopLED OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Loop灯 0:ON,1:OFF" ::= {NB110GRemoteStatusEntry 8} NB110GClock OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "时钟模式 0:内时钟；1:外时钟" ::= {NB110GRemoteStatusEntry 9} NB110GE1Impedance OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "线路阻抗 0:120欧；1:75欧" ::= {NB110GRemoteStatusEntry 10} NB110GEtherProtocol OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "以太口是否自动协商 0:关闭；1:打开" ::= {NB110GRemoteStatusEntry 11} NB110GEtherRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "以太口的工作速率 0:10M;1:100M" ::= {NB110GRemoteStatusEntry 12} NB110GEtherDuplex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "以太口的工作模式 0:全双工；1:半双工" ::= {NB110GRemoteStatusEntry 13} NB110GMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "运行模式 0:正常运行；1:远端环回" ::= {NB110GRemoteStatusEntry 14} NB110GhwVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "NB110G的硬件ID号，用3个字节表示(低字节表示低位字符,高字节表示高位字符)。 在网管界面上需要用字符形式表示硬件版本号。" ::= {NB110GRemoteStatusEntry 15} NB110GswVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "NB110G的软件ID号" ::= {NB110GRemoteStatusEntry 16} NB110GFPGAVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "NB110G的FPGA号" ::= {NB110GRemoteStatusEntry 17} NB110GResetIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "接口索引" ::= {NB110GGlobal 1} END