Observium_CE/mibs/cisco/CISCO-DLEP-MIB

1432 lines
50 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

-- *****************************************************************
-- CISCO-DLEP-MIB.my: DLEP MIB file
--
-- Jun 2023, SivaKumar PINJALA
-- Copyright (c) 2023 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
CISCO-DLEP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32
FROM SNMPv2-SMI
DisplayString, TimeTicks
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI
CiscoNetworkProtocol, CiscoNetworkAddress
FROM CISCO-TC
InterfaceIndex
FROM IF-MIB
;
ciscoDlepMIB MODULE-IDENTITY
LAST-UPDATED "202310300000Z"
ORGANIZATION "Cisco System Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 West Tasman Drive,
San Jose CA 95134-1706.
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
" The MIB module for management of the Dynamic Link Exchange
Protocol in Cisco devices."
REVISION "202310300000Z"
DESCRIPTION
" Initial version of this MIB module."
::= { ciscoMgmt 1060 }
ciscoDlepMIBNotifs OBJECT IDENTIFIER ::= { ciscoDlepMIB 0 }
ciscoDlepMIBObjects OBJECT IDENTIFIER ::= { ciscoDlepMIB 1 }
dlepGlobals OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 1 }
dlepInterface OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 2 }
dlepNeighbor OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 3 }
dlepClient OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 4 }
dlepConfig OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 5 }
dlepCounters OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 6 }
dlepEnableIndividualNotifications OBJECT-TYPE
SYNTAX BITS {
neighborSessionChange(0),
clientSessionChange(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used to enable/disable individual notifications
defined in this MIB module. Turning on a particular bit would
enable the corresponding trap and, similarly, turning off a
particular bit would disable the corresponding trap. The
following notifications are controlled by this object:
neighborSessionChange(0): enables/disables dlepNeighborSessionChange
notification.
clientSessionChange(1): enables/disables dlepClientSessionChange
notification."
::= { dlepGlobals 1 }
-- Notifications
dlepMIBNotifications OBJECT IDENTIFIER
::= { ciscoDlepMIBNotifs 0 }
dlepNeighborSessionChange NOTIFICATION-TYPE
OBJECTS {
dlepNeighborInterfaceIndex,
dlepNeighborSessionOperStatus
}
STATUS current
DESCRIPTION
" This notification is generated when the state
of a Neighbor Session has changed."
::= { dlepMIBNotifications 0 }
dlepClientSessionChange NOTIFICATION-TYPE
OBJECTS {
dlepClientInterfaceIndex,
dlepClientSessionOperStatus
}
STATUS current
DESCRIPTION
" This notification is generated when the state
of a Client Session has changed."
::= { dlepMIBNotifications 1 }
--
-- The DLEP Interface Group
--
dlepInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DlepInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The (conceptual) table containing DLEP Interface Info."
::= { dlepInterface 1 }
dlepInterfaceEntry OBJECT-TYPE
SYNTAX DlepInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry (conceptual row) in the dlepInterfaceTable,
containing the details of DLEP interface.The dlepInterfaceTable
is double-indexed by dlepInterfaceIndex and dlepInterfaceNbrSessionId.
Each entry (conceptual row) in the dlepInterfaceTable will be populated
after adding the neighbor."
INDEX { dlepInterfaceIndex, dlepInterfaceNbrSessionId }
::= { dlepInterfaceTable 1 }
DlepInterfaceEntry ::= SEQUENCE {
dlepInterfaceIndex InterfaceIndex,
dlepInterfaceNbrSessionId Integer32,
dlepInterfaceName DisplayString
}
dlepInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepInterfaceIndex, this data item contains Interface Snmp
Index."
::= { dlepInterfaceEntry 1 }
dlepInterfaceNbrSessionId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepInterfaceNbrSessionId, this data item contains the
interface neighbor session ids on interface where dlep
session established."
::= { dlepInterfaceEntry 2 }
dlepInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..1000))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepInterfaceName, this data item contains interface name."
::= { dlepInterfaceEntry 3 }
--
-- The DLEP Neighbor Group
--
dlepNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF DlepNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The (conceptual) table containing DLEP Neighbor Info."
::= { dlepNeighbor 1 }
dlepNeighborEntry OBJECT-TYPE
SYNTAX DlepNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry (conceptual row) in the dlepNeighborTable,
containing the details of DLEP neighbor."
INDEX { dlepNeighborSessionId }
::= { dlepNeighborTable 1 }
DlepNeighborEntry ::= SEQUENCE {
dlepNeighborSessionId Integer32,
dlepNeighborInterfaceIndex InterfaceIndex,
dlepNeighborInterfaceName DisplayString,
dlepNeighborAddress CiscoNetworkAddress,
dlepNeighborAddressV6LL CiscoNetworkAddress,
dlepNeighborAddressV6GBL CiscoNetworkAddress,
dlepNeighborIpUpTime TimeTicks,
dlepNeighborMetricsMTU Integer32,
dlepNeighborMetricsCdrRx Integer32,
dlepNeighborMetricsCdrTx Integer32,
dlepNeighborMetricsMdrRx Integer32,
dlepNeighborMetricsMdrTx Integer32,
dlepNeighborMetricsRlqRx Integer32,
dlepNeighborMetricsRlqTx Integer32,
dlepNeighborMetricsLatency Integer32,
dlepNeighborMetricsResources Integer32,
dlepNeighborMetricsVac DisplayString,
dlepNeighborMetricsMacAddress CiscoNetworkAddress,
dlepNeighborSessionOperStatus Integer32
}
dlepNeighborSessionId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighborSessionId, this data iteam contains
neighbor session id."
::= { dlepNeighborEntry 1 }
dlepNeighborInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepneighborInterfaceIndex, this data item contains
Neighbor Interface Snmp Index."
::= { dlepNeighborEntry 2 }
dlepNeighborInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..100))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighborInterfacename is the name of the interface
on which the DLEP session is established."
::= { dlepNeighborEntry 3 }
dlepNeighborAddress OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighborAddress, This data item contains
the IPv4 address of the destination."
::= { dlepNeighborEntry 4 }
dlepNeighborAddressV6LL OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighborAddressV6LL, This data item contains
the IPv6 Link Local address of the destination."
::= { dlepNeighborEntry 5 }
dlepNeighborAddressV6GBL OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighborAddressV6GBL, This data item contains
the IPv6 Global address of the destination."
::= { dlepNeighborEntry 6 }
dlepNeighborIpUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighbor, this data item contains the UpTime
of destination."
::= { dlepNeighborEntry 7 }
dlepNeighborMetricsMTU OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighbor Maximum Transmission Unit (MTU), this
data item is used to indicate the maximum size, in octets,
of an IP packet that can be transmitted without fragmentation,
including headers, but excluding any lower-layer headers."
::= { dlepNeighborEntry 8 }
dlepNeighborMetricsCdrRx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighbor radio Current Data Rate (Receive) (CDRR),
this data item is used to indicate the rate at which the link
is currently operating for receiving traffic."
::= { dlepNeighborEntry 9 }
dlepNeighborMetricsCdrTx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighbor radio Current Data Rate (Transmit) (CDRT),
thisi data item is used to indicate the rate at which the link
is currently operating for transmitting traffic."
::= { dlepNeighborEntry 10 }
dlepNeighborMetricsMdrRx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighbor radio Maximum Data Rate (Receive) (MDRR),
this data item is used to indicate the maximum theoretical
data rate, in bits per second (bps), that can be achieved
while receiving data on the link."
::= { dlepNeighborEntry 11 }
dlepNeighborMetricsMdrTx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighbor radio Maximum Data Rate (Transmit) (MDRT),
this data item is used to indicate the maximum theoretical
data rate, in bits per second, that can be achieved
while transmitting data on the link."
::= { dlepNeighborEntry 12 }
dlepNeighborMetricsRlqRx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighbor Relative Link Quality (Receive) (RLQR),
This data item is used to indicate the quality of the link
to a destination for receiving traffic, with 0 meaning
worst quality and 100 meaning best quality."
::= { dlepNeighborEntry 13 }
dlepNeighborMetricsRlqTx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighbor Relative Link Quality (Transmit) (RLQT),
This data item is used to indicate the quality of the link
to a destination for transmitting traffic, with 0 meaning
worst quality and 100 meaning best quality."
::= { dlepNeighborEntry 14 }
dlepNeighborMetricsLatency OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighbor radio Latency to indicate the amount of
latency, in microseconds, on the link. The Latency value is
reported as transmission delay."
::= { dlepNeighborEntry 15 }
dlepNeighborMetricsResources OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighbor Resources (RES), this data item is used
to indicate the amount of finite resources available for data
transmission and reception at the destination as a percentage,
with 0 meaning no resources remaining and 100 meaning
a full supply."
::= { dlepNeighborEntry 16 }
dlepNeighborMetricsVac OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..100))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighborMetricsVac, this data item contains radio
Virtual-Access Number information."
::= { dlepNeighborEntry 17 }
dlepNeighborMetricsMacAddress OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighbor MAC Address data item contains the address
of the destination on the remote node."
::= { dlepNeighborEntry 18 }
dlepNeighborSessionOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
forcedDown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the dlep neighbor.
up - Connected and operational.
down - Not connected to a neighboring router or
administrative down.
forcedDown - Shut down by dlep manager due to mismatch or
dlep neighbor errors."
::= { dlepNeighborEntry 19 }
--
-- The DLEP Client Group
--
dlepClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF DlepClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing DLEP Client Info."
::= { dlepClient 1 }
dlepClientEntry OBJECT-TYPE
SYNTAX DlepClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the dlepClientTable,
containing the information of DLEP client."
INDEX { dlepClientInterfaceIndex }
::= { dlepClientTable 1 }
DlepClientEntry ::= SEQUENCE {
dlepClientInterfaceIndex InterfaceIndex,
dlepClientInterfaceName DisplayString,
dlepClientPeerId Integer32,
dlepNeighborCount Integer32,
dlepClientDescription DisplayString,
dlepClientAddressType CiscoNetworkProtocol,
dlepClientLocalAddress CiscoNetworkAddress,
dlepClientLocalRadioAddress CiscoNetworkAddress,
dlepClientUpTime TimeTicks,
dlepClientMetricsCdrRx Integer32,
dlepClientMetricsCdrTx Integer32,
dlepClientMetricsMdrRx Integer32,
dlepClientMetricsMdrTx Integer32,
dlepClientMetricsRlqRx Integer32,
dlepClientMetricsRlqTx Integer32,
dlepClientMetricsLatency Integer32,
dlepClientMetricsResources Integer32,
dlepClientMetricsMTU Integer32,
dlepClientPort Integer32,
dlepClientConfigVT Integer32,
dlepClientConfigHeartBeat Integer32,
dlepClientConfigDeadInterval Integer32,
dlepClientConfigTerminate Integer32,
dlepConfigNeighborDown Integer32,
dlepClientSessionOperStatus Integer32,
dlepClientMetricsSummary DisplayString,
dlepClientConfigSummary DisplayString
}
dlepClientInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientInterfaceIndex, this data item contains
client interface snmp index."
::= { dlepClientEntry 1 }
dlepClientInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientInterfaceName, this data item contains
Interface Name on which dlep client session is established."
::= { dlepClientEntry 2 }
dlepClientPeerId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientPeerId, this data item contains Client Peer Id."
::= { dlepClientEntry 3 }
dlepNeighborCount OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepNeighborCount, this data item contains the number
of neighbors connected to client."
::= { dlepClientEntry 4 }
dlepClientDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientDescription, this data item contains
the description of client"
::= { dlepClientEntry 5 }
dlepClientAddressType OBJECT-TYPE
SYNTAX CiscoNetworkProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" An indication of the type of address contained in the
corresponding instance of dlepClientAddress."
::= { dlepClientEntry 6 }
dlepClientLocalAddress OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientLocalAddress, this data item contains the
Local Client Address."
::= { dlepClientEntry 7 }
dlepClientLocalRadioAddress OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientLocalRadioAddress, this data item contains
the local client radio address."
::= { dlepClientEntry 8 }
dlepClientUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClient UpTime, this data item contains client up time."
::= { dlepClientEntry 9 }
dlepClientMetricsCdrRx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The client radio Current Data Rate (Receive) (CDRR),
this data item is used to indicate the rate at which the link
is currently operating for receiving traffic."
::= { dlepClientEntry 10 }
dlepClientMetricsCdrTx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The client radio Current Data Rate (Transmit) (CDRT),
this data item is used to indicate the rate at which the link
is currently operation for tansmiting traffic"
::= { dlepClientEntry 11 }
dlepClientMetricsMdrRx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClient radio Maximum Data Rate (Receive) (MDRR),
this data item is used to indicate the maximum theoretical
data rate, in bits per second (bps), that can be achieved
while receiving data on the link."
::= { dlepClientEntry 12 }
dlepClientMetricsMdrTx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClient radio Maximum Data Rate (Transmit) (MDRT),
this data item is used to indicate the maximum theoretical
data rate, in bits per second, that can be achieved
while transmitting data on the link."
::= { dlepClientEntry 13 }
dlepClientMetricsRlqRx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClient Relative Link Quality (Receive) (RLQR),
This data item is used to indicate the quality of the link
to a destination for receiving traffic, with 0 meaning
worst quality and 100 meaning best quality."
::= { dlepClientEntry 14 }
dlepClientMetricsRlqTx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClient Relative Link Quality (Transmit) (RLQT),
This data item is used to indicate the quality of the link
to a destination for transmitting traffic, with 0 meaning
worst quality and 100 meaning best quality."
::= { dlepClientEntry 15 }
dlepClientMetricsLatency OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClient radio Latency to indicate the amount of
latency, in microseconds, on the link. The Latency value is
reported as transmission delay."
::= { dlepClientEntry 16 }
dlepClientMetricsResources OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClient Resources (RES), this data item is used
to indicate the amount of finite resources available for data
transmission and reception at the destination as a percentage,
with 0 meaning no resources remaining and 100 meaning
a full supply."
::= { dlepClientEntry 17 }
dlepClientMetricsMTU OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClient Maximum Transmission Unit (MTU), this
data item is used to indicate the maximum size, in octets,
of an IP packet that can be transmitted without fragmentation,
including headers, but excluding any lower-layer headers."
::= { dlepClientEntry 18 }
dlepClientPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientPort, this data item contains the TCP port
number on the modem available for connections."
::= { dlepClientEntry 19 }
dlepClientConfigVT OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientConfigVT, this data item contains number of
Virtual Template."
::= { dlepClientEntry 20 }
dlepClientConfigHeartBeat OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientConfigHeartBeat, this data item is used to
specify a period in milliseconds for radio client heartbeat
configuration."
::= { dlepClientEntry 21 }
dlepClientConfigDeadInterval OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientConfigDeadInterval, this data item is used to
specify a period in milliseconds for radio client dead interval
configuration."
::= { dlepClientEntry 22 }
dlepClientConfigTerminate OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientConfigTerminate, this data item contains
radio client Teminate ack configuration inerval."
::= { dlepClientEntry 23 }
dlepConfigNeighborDown OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigNeighborDown, this data item contains
radio neighbor down ack configuartion."
::= { dlepClientEntry 24 }
dlepClientSessionOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
forcedDown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the dlep client session.
up - Connected and operational.
down - Not connected to a neighboring router or
administrative down.
forcedDown - Shut down by dlep manager due to mismatch or
dlep client session errors."
::= { dlepClientEntry 25 }
dlepClientMetricsSummary OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientMetricsSummary, this data item contains summary
of client information. That is ClientIpaddress,RLQR,RLQT,
CDRR,CDRT,MDRR,MDRT,Latency,Resource."
::= { dlepClientEntry 26 }
dlepClientConfigSummary OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepClientConfigSummary , this data item contails
the information about client configuration that is
Ipaddress,port,VirtualTemplate,HeartbeatTimer,DeadInterval,
TerminateACK,NeighborDownTimer."
::= { dlepClientEntry 27 }
--
-- The DLEP Configuration Group
--
dlepConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DlepConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The (conceptual) table containing DLEP Config Info."
::= { dlepConfig 1 }
dlepConfigEntry OBJECT-TYPE
SYNTAX DlepConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry (conceptual row) in the dlepConfigTable,
containing the information of DLEP config."
INDEX { dlepConfigInterfaceIndex }
::= { dlepConfigTable 1 }
DlepConfigEntry ::= SEQUENCE {
dlepConfigInterfaceIndex InterfaceIndex,
dlepConfigInterfaceName DisplayString,
dlepConfigPeerInterfaceDescription DisplayString,
dlepConfigLocalAddressType CiscoNetworkProtocol,
dlepConfigLocalAddress CiscoNetworkAddress,
dlepConfigLocalTCPPort Integer32,
dlepConfigLocalUDPPort Integer32,
dlepConfigRemoteAddressType CiscoNetworkProtocol,
dlepConfigRemoteAddress CiscoNetworkAddress,
dlepConfigRemoteTCPPort Integer32,
dlepConfigRemoteUDPPort Integer32,
dlepConfigSessionMode DisplayString,
dlepConfigVirtualTemplate Integer32,
dlepConfigMissedHeartbeatThreshold Integer32,
dlepConfigHeartbeatInterval Integer32,
dlepConfigDiscoveryInterval Integer32,
dlepConfigSessionAckTimeout Integer32,
dlepConfigPeerTerminateAckTimeout Integer32,
dlepConfigNeighborDownAckTimeout Integer32,
dlepConfigSummary DisplayString
}
dlepConfigInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigInterfaceIndex, this data item contains
config interface snmp index."
::= { dlepConfigEntry 1 }
dlepConfigInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigInterfaceName, this data item contains dlep
enabled interface name."
::= { dlepConfigEntry 2 }
dlepConfigPeerInterfaceDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigPeerInterfaceDescription, this data item contains the dlep
peer interface description."
::= { dlepConfigEntry 3 }
dlepConfigLocalAddressType OBJECT-TYPE
SYNTAX CiscoNetworkProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" An indication of the type of address contained in the
corresponding instance of dlepConfigLocalAddress."
::= { dlepConfigEntry 4 }
dlepConfigLocalAddress OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigLocalAddress, this data item contains
configuration of Local Address."
::= { dlepConfigEntry 5 }
dlepConfigLocalTCPPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigLocalTCPPort, this data item contains
Local TCP port number."
::= { dlepConfigEntry 6 }
dlepConfigLocalUDPPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigiLocalUDPPort, this data item contains
Local UDP port number."
::= { dlepConfigEntry 7 }
dlepConfigRemoteAddressType OBJECT-TYPE
SYNTAX CiscoNetworkProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" An indication of the type of address contained in the
corresponding instance of dlepConfigRemoteAddress."
::= { dlepConfigEntry 8 }
dlepConfigRemoteAddress OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigRemoteAddress, this data item contains
configuration of Remote Address."
::= { dlepConfigEntry 9 }
dlepConfigRemoteTCPPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigRemoteTCPPort, this data iteam contains
configuration of Remote TCP port."
::= { dlepConfigEntry 10 }
dlepConfigRemoteUDPPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigRemoteUDPPort, this data iteam contains
configuration of Remote UDP port number."
::= { dlepConfigEntry 11 }
dlepConfigSessionMode OBJECT-TYPE
SYNTAX INTEGER {
manual-v4(1),
manual-v6(2),
auto-v4(3),
auto-v6(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigSessionMode, this data iteam contains
the IP configuration mode which can be either of this values:
manual-v4/manual-v6/auto-v4/auto-v6."
::= { dlepConfigEntry 12 }
dlepConfigVirtualTemplate OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigVirtualTemplace, this data item contains
Virtual Template Number."
::= { dlepConfigEntry 13 }
dlepConfigMissedHeartbeatThreshold OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigMissedHeartbeatThreshold, this data item
contains configuration of Missed heartbeat threshold."
::= { dlepConfigEntry 14 }
dlepConfigHeartbeatInterval OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigHeartbeatInterval, this data item contains
configuration of heart beat interval."
::= { dlepConfigEntry 15 }
dlepConfigDiscoveryInterval OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigDiscoveryInterval, this data item contains
configuration of discovery interval."
::= { dlepConfigEntry 16 }
dlepConfigSessionAckTimeout OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigSessionAckTimeout, this data item contains
configuration of Session ack timeout."
::= { dlepConfigEntry 17 }
dlepConfigPeerTerminateAckTimeout OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigPeerTerminateAckTimeout, this data item contains
configuration of peer terminate ack timeout."
::= { dlepConfigEntry 18 }
dlepConfigNeighborDownAckTimeout OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigNeighborDownAckTimeout, this data item contains
configuration of neighbor down ack timeout."
::= { dlepConfigEntry 19 }
dlepConfigSummary OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepConfigSummary, this data item contains configuration
summary that is Localserver,configversion,tcpport,udpport,
virtualtemplate,heartthreshold,heartinterval,discoveryinterval,
sessionack,peerterminateack,neighbordownack."
::= { dlepConfigEntry 20 }
--
-- The DLEP Counters Group
--
dlepCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF DlepCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing DLEP Counters Info."
::= { dlepCounters 1 }
dlepCountersEntry OBJECT-TYPE
SYNTAX DlepCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the dlepCountersTable,
containing the details of DLEP counters."
INDEX { dlepCounterInterfaceIndex }
::= { dlepCountersTable 1 }
DlepCountersEntry ::= SEQUENCE {
dlepCounterInterfaceIndex InterfaceIndex,
dlepCounterInterfaceName DisplayString,
dlepCounterLastClearTime DisplayString,
dlepCounterLocalIpType CiscoNetworkProtocol,
dlepCounterLocalIp CiscoNetworkAddress,
dlepCounterLocalUDPPort Integer32,
dlepCounterLocalTCPPort Integer32,
dlepCounterRXPeerDiscovery Integer32,
dlepCounterRXPeerOffer Integer32,
dlepCounterRXPeerInit Integer32,
dlepCounterRXPeerInitAck Integer32,
dlepCounterRXHeartbeat Integer32,
dlepCounterRXPeerTerminate Integer32,
dlepCounterRXPeerTerminateAck Integer32,
dlepCounterTXPeerOffer Integer32,
dlepCounterTXPeerDiscovery Integer32,
dlepCounterTXPeerInitAck Integer32,
dlepCounterTXPeerInit Integer32,
dlepCounterTXHeartbeat Integer32,
dlepCounterTXPeerTerminateAck Integer32,
dlepCounterTXPeerTerminate Integer32,
dlepCounterRXNeighborUp Integer32,
dlepCounterRXMetric Integer32,
dlepCounterRXNeighborDown Integer32,
dlepCounterRXNeighborDownAck Integer32,
dlepCounterTXNeighborUpAck Integer32,
dlepCounterTXNeighborDownAck Integer32,
dlepCounterTXNeighborDown Integer32,
dlepCounterRXInvalidMessage Integer32,
dlepCounterPreExistingNeighbor Integer32,
dlepCounterNeighborNotFound Integer32,
dlepCounterRXUnknownMessage Integer32,
dlepCounterNeighborResourceError Integer32,
dlepCounterNeighborMsgPeerNotUp Integer32,
dlepCounterPeerHeartbeatTimer Integer32,
dlepCounterPeerTerminateAckTimer Integer32,
dlepCounterNeighborTerminateAckTimer Integer32,
dlepCounterRadioConnectTimer Integer32,
dlepCountersPeersSummary DisplayString,
dlepCountersNeighborsSummary DisplayString,
dlepCountersExceptionsSummary DisplayString,
dlepCountersTimersSummary DisplayString,
dlepLocalCountersSummary DisplayString
}
dlepCounterInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterInterfaceIndex, this data item contains
counter interface snmp index."
::= { dlepCountersEntry 1 }
dlepCounterInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterInterfaceName, this data item contains dlep
enabled interface name."
::= { dlepCountersEntry 2 }
dlepCounterLastClearTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterLastClearTime, this data item contains dlep
last clear time."
::= { dlepCountersEntry 3 }
dlepCounterLocalIpType OBJECT-TYPE
SYNTAX CiscoNetworkProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" An indication of the type of address contained in th
corresponding instance of dlepCounterLocalIp."
::= { dlepCountersEntry 4 }
dlepCounterLocalIp OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterLocalIp, this data item contains
configuration of Local Ip."
::= { dlepCountersEntry 5 }
dlepCounterLocalTCPPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterLocalTCPPort, this data item contains
Local TCP port number."
::= { dlepCountersEntry 6 }
dlepCounterLocalUDPPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterLocalUDPPort, this data item contains
Local UDP port number."
::= { dlepCountersEntry 7 }
dlepCounterRXPeerDiscovery OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXPeerDiscovery, this data item contains
RX Peer Discovery counter."
::= { dlepCountersEntry 8 }
dlepCounterRXPeerOffer OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXPeerOffer, this data item contains
RX Peer Offer counter."
::= { dlepCountersEntry 9 }
dlepCounterRXPeerInit OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXPeerInit, this data item contains
RX Peer Init counter."
::= { dlepCountersEntry 10 }
dlepCounterRXPeerInitAck OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXPeerInitAck, this data item contains
RX Peer Init Ack counter."
::= { dlepCountersEntry 11 }
dlepCounterRXHeartbeat OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXHeartbeat, this data item contains
RX Heartbeat counter."
::= { dlepCountersEntry 12 }
dlepCounterRXPeerTerminate OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXPeerTerminate, this data item contains
RX Peer Terminate counter."
::= { dlepCountersEntry 13 }
dlepCounterRXPeerTerminateAck OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXPeerTerminateAck, this data item contains
RX Peer Terminate Ack counter."
::= { dlepCountersEntry 14 }
dlepCounterTXPeerOffer OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterTXPeerOffer, this data item contains
TX Peer Offer counter."
::= { dlepCountersEntry 15 }
dlepCounterTXPeerDiscovery OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterTXPeerDiscovery, this data item contains
TX Peer Discovery counter."
::= { dlepCountersEntry 16 }
dlepCounterTXPeerInitAck OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterTXPeerInitAck, this data item contains
TX Peer Init Ack counter."
::= { dlepCountersEntry 17 }
dlepCounterTXPeerInit OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterTXPeerInit, this data item contains
TX Peer Init counter."
::= { dlepCountersEntry 18 }
dlepCounterTXHeartbeat OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterTXHeartbeat, this data item contains
TX Heartbeat counter."
::= { dlepCountersEntry 19 }
dlepCounterTXPeerTerminateAck OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterTXPeerTerminateAck, this data item contains
TX Peer Terminate Ack counter."
::= { dlepCountersEntry 20 }
dlepCounterTXPeerTerminate OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterTXPeerTerminate, this data item contains
TX Peer Terminate counter."
::= { dlepCountersEntry 21 }
dlepCounterRXNeighborUp OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXNeighborUp, this data item contains
RX Neighbor Up counter."
::= { dlepCountersEntry 22 }
dlepCounterRXMetric OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXMetric, this data item contains
RX Metric counter."
::= { dlepCountersEntry 23 }
dlepCounterRXNeighborDown OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXNeighborDown, this data item contains
RX Neighbor Down counter."
::= { dlepCountersEntry 24 }
dlepCounterRXNeighborDownAck OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXNeighborDownAck, this data item contains
RX Neighbor Down Ack counter."
::= { dlepCountersEntry 25 }
dlepCounterTXNeighborUpAck OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterTXNeighborUpAck, this data item contains
TX Neighbor Up Ack counter."
::= { dlepCountersEntry 26 }
dlepCounterTXNeighborDownAck OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterTXNeighborDownAck, this data item contains
TX Neighbor Down Ack counter."
::= { dlepCountersEntry 27 }
dlepCounterTXNeighborDown OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterTXNeighborDown, this data item contains
TX Neighbor Down counter."
::= { dlepCountersEntry 28 }
dlepCounterRXInvalidMessage OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXInvalidMessage, this data item contains
RX Invalid Message counter."
::= { dlepCountersEntry 29 }
dlepCounterPreExistingNeighbor OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterPreExistingNeighbor, this data item contains
PreExisting Neighbor counter."
::= { dlepCountersEntry 30 }
dlepCounterNeighborNotFound OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterNeighborNotFound, this data item contains
Neighbor Not Found counter."
::= { dlepCountersEntry 31 }
dlepCounterRXUnknownMessage OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRXUnknownMessage, this data item contains
RX Unknown Message counter."
::= { dlepCountersEntry 32 }
dlepCounterNeighborResourceError OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterNeighborResourceError, this data item contains
Neighbor Resource Error counter."
::= { dlepCountersEntry 33 }
dlepCounterNeighborMsgPeerNotUp OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterNeighborMsgPeerNotUp, this data item contains
Neighbor Msg Peer Not Up counter."
::= { dlepCountersEntry 34 }
dlepCounterPeerHeartbeatTimer OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterPeerHeartbeatTimer, this data item contains
Peer Heartbeat Timer counter."
::= { dlepCountersEntry 35 }
dlepCounterPeerTerminateAckTimer OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterPeerTerminateAckTimer, this data item contains
Peer Terminate Ack Timer counter."
::= { dlepCountersEntry 36 }
dlepCounterNeighborTerminateAckTimer OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterNeighborTerminateAckTimer, this data item
contains Neighbor Terminate Ack Timer counter."
::= { dlepCountersEntry 37 }
dlepCounterRadioConnectTimer OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCounterRadioConnectTimer, this data item contains
Radio Connect Timer counter."
::= { dlepCountersEntry 38 }
dlepCountersPeersSummary OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCountersPeersSummary, this data item contains
peer counters information on local Servers running DLEP
on an interface, that is RXPeerDiscovery,RXPeerOffer,RXPeerInit,
RXPeerInitAck,RXHeartbeat,RXPeerTerminate,RXPeerTerminateAck,
TXPeerOffer,TXPeerDiscovery,TXPeerInitAck,TXPeerInit,
TXHeartbeat,TXPeerTerminateAck,TXPeerTermiante."
::= { dlepCountersEntry 39 }
dlepCountersNeighborsSummary OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCountersNeighborsSummary, this data iteam contains
neighbor counters information on local servers running DLEP
on an inerface, that is Localserver,UDPport,interface,
RXNeighborUp,RxMetric,RXNeighborDown,RxNeighborDownAck,
TXNeighborUPAck,TXNeighborDownAck,TXNeighborDown."
::= { dlepCountersEntry 40 }
dlepCountersExceptionsSummary OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCountersExceptionsSummary, this data iteam contains
exceptions counters information on local servers running DLEP
on an inerface, that is Localserver,UDPport,interface,
RxInvalidMessage,Pre-ExistingNeighbor,NeighborNotFound,
RxUnknownMessage,NeighborResourceError,NeighborMsgPeerNotUp."
::= { dlepCountersEntry 41 }
dlepCountersTimersSummary OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepCountersTimersSummary, this data iteam contains
Timers summary information on local servers running DLEP
on an inerface, that is Localserver,UDPport,interface,
PeerHeartbeatTimer,PeerTerminateAckTimer,NeighborTerminateAckTimer,
RadioConnectTimer."
::= { dlepCountersEntry 42 }
dlepLocalCountersSummary OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The dlepLocalCountersSummary, this data iteam contains
peer counters summary on local server. that is
Localserver,udpPort,interface,RxPeerDiscovery,RxPeerOffer,
RXPeerInit,RXPeerInitAck,RXHeartbeat,RXPeerTerminate,
RXPeerTerminateAck,TXPeerOffer,TXPeerDiscovery,TXPeerInitAck,
TXPeerInit,TXHeartbeat,TXPeerTerminateAck,TXPeerTermiante,
RXNeighborUp,RxMetric,RXNeighborDown,RXNeighborDownAck,
TXNeighborUPack,TXNeighborDownAck,TXNeighborDown,
RXInvalidMessage,Pre-ExistingNeighbor,NeighborNotFound,
RXUknownMessage,NeighborREsourceError,NeighborMesgPeerNotup,
PeerHeartbeatTimer,PeerTerminateAckTimer,
NeighborTerminateAckTimer,RadioConnectTimer."
::= { dlepCountersEntry 43 }
END