-- ***************************************************************** -- CISCO-DLEP-MIB.my: DLEP MIB file -- -- Jun 2023, SivaKumar PINJALA -- Copyright (c) 2023 by Cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- CISCO-DLEP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI DisplayString, TimeTicks FROM SNMPv2-TC ciscoMgmt FROM CISCO-SMI CiscoNetworkProtocol, CiscoNetworkAddress FROM CISCO-TC InterfaceIndex FROM IF-MIB ; ciscoDlepMIB MODULE-IDENTITY LAST-UPDATED "202310300000Z" ORGANIZATION "Cisco System Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive, San Jose CA 95134-1706. USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION " The MIB module for management of the Dynamic Link Exchange Protocol in Cisco devices." REVISION "202310300000Z" DESCRIPTION " Initial version of this MIB module." ::= { ciscoMgmt 1060 } ciscoDlepMIBNotifs OBJECT IDENTIFIER ::= { ciscoDlepMIB 0 } ciscoDlepMIBObjects OBJECT IDENTIFIER ::= { ciscoDlepMIB 1 } dlepGlobals OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 1 } dlepInterface OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 2 } dlepNeighbor OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 3 } dlepClient OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 4 } dlepConfig OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 5 } dlepCounters OBJECT IDENTIFIER ::= { ciscoDlepMIBObjects 6 } dlepEnableIndividualNotifications OBJECT-TYPE SYNTAX BITS { neighborSessionChange(0), clientSessionChange(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to enable/disable individual notifications defined in this MIB module. Turning on a particular bit would enable the corresponding trap and, similarly, turning off a particular bit would disable the corresponding trap. The following notifications are controlled by this object: neighborSessionChange(0): enables/disables dlepNeighborSessionChange notification. clientSessionChange(1): enables/disables dlepClientSessionChange notification." ::= { dlepGlobals 1 } -- Notifications dlepMIBNotifications OBJECT IDENTIFIER ::= { ciscoDlepMIBNotifs 0 } dlepNeighborSessionChange NOTIFICATION-TYPE OBJECTS { dlepNeighborInterfaceIndex, dlepNeighborSessionOperStatus } STATUS current DESCRIPTION " This notification is generated when the state of a Neighbor Session has changed." ::= { dlepMIBNotifications 0 } dlepClientSessionChange NOTIFICATION-TYPE OBJECTS { dlepClientInterfaceIndex, dlepClientSessionOperStatus } STATUS current DESCRIPTION " This notification is generated when the state of a Client Session has changed." ::= { dlepMIBNotifications 1 } -- -- The DLEP Interface Group -- dlepInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF DlepInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The (conceptual) table containing DLEP Interface Info." ::= { dlepInterface 1 } dlepInterfaceEntry OBJECT-TYPE SYNTAX DlepInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry (conceptual row) in the dlepInterfaceTable, containing the details of DLEP interface.The dlepInterfaceTable is double-indexed by dlepInterfaceIndex and dlepInterfaceNbrSessionId. Each entry (conceptual row) in the dlepInterfaceTable will be populated after adding the neighbor." INDEX { dlepInterfaceIndex, dlepInterfaceNbrSessionId } ::= { dlepInterfaceTable 1 } DlepInterfaceEntry ::= SEQUENCE { dlepInterfaceIndex InterfaceIndex, dlepInterfaceNbrSessionId Integer32, dlepInterfaceName DisplayString } dlepInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepInterfaceIndex, this data item contains Interface Snmp Index." ::= { dlepInterfaceEntry 1 } dlepInterfaceNbrSessionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepInterfaceNbrSessionId, this data item contains the interface neighbor session ids on interface where dlep session established." ::= { dlepInterfaceEntry 2 } dlepInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1000)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepInterfaceName, this data item contains interface name." ::= { dlepInterfaceEntry 3 } -- -- The DLEP Neighbor Group -- dlepNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF DlepNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The (conceptual) table containing DLEP Neighbor Info." ::= { dlepNeighbor 1 } dlepNeighborEntry OBJECT-TYPE SYNTAX DlepNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry (conceptual row) in the dlepNeighborTable, containing the details of DLEP neighbor." INDEX { dlepNeighborSessionId } ::= { dlepNeighborTable 1 } DlepNeighborEntry ::= SEQUENCE { dlepNeighborSessionId Integer32, dlepNeighborInterfaceIndex InterfaceIndex, dlepNeighborInterfaceName DisplayString, dlepNeighborAddress CiscoNetworkAddress, dlepNeighborAddressV6LL CiscoNetworkAddress, dlepNeighborAddressV6GBL CiscoNetworkAddress, dlepNeighborIpUpTime TimeTicks, dlepNeighborMetricsMTU Integer32, dlepNeighborMetricsCdrRx Integer32, dlepNeighborMetricsCdrTx Integer32, dlepNeighborMetricsMdrRx Integer32, dlepNeighborMetricsMdrTx Integer32, dlepNeighborMetricsRlqRx Integer32, dlepNeighborMetricsRlqTx Integer32, dlepNeighborMetricsLatency Integer32, dlepNeighborMetricsResources Integer32, dlepNeighborMetricsVac DisplayString, dlepNeighborMetricsMacAddress CiscoNetworkAddress, dlepNeighborSessionOperStatus Integer32 } dlepNeighborSessionId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighborSessionId, this data iteam contains neighbor session id." ::= { dlepNeighborEntry 1 } dlepNeighborInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepneighborInterfaceIndex, this data item contains Neighbor Interface Snmp Index." ::= { dlepNeighborEntry 2 } dlepNeighborInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighborInterfacename is the name of the interface on which the DLEP session is established." ::= { dlepNeighborEntry 3 } dlepNeighborAddress OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighborAddress, This data item contains the IPv4 address of the destination." ::= { dlepNeighborEntry 4 } dlepNeighborAddressV6LL OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighborAddressV6LL, This data item contains the IPv6 Link Local address of the destination." ::= { dlepNeighborEntry 5 } dlepNeighborAddressV6GBL OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighborAddressV6GBL, This data item contains the IPv6 Global address of the destination." ::= { dlepNeighborEntry 6 } dlepNeighborIpUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighbor, this data item contains the UpTime of destination." ::= { dlepNeighborEntry 7 } dlepNeighborMetricsMTU OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighbor Maximum Transmission Unit (MTU), this data item is used to indicate the maximum size, in octets, of an IP packet that can be transmitted without fragmentation, including headers, but excluding any lower-layer headers." ::= { dlepNeighborEntry 8 } dlepNeighborMetricsCdrRx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighbor radio Current Data Rate (Receive) (CDRR), this data item is used to indicate the rate at which the link is currently operating for receiving traffic." ::= { dlepNeighborEntry 9 } dlepNeighborMetricsCdrTx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighbor radio Current Data Rate (Transmit) (CDRT), thisi data item is used to indicate the rate at which the link is currently operating for transmitting traffic." ::= { dlepNeighborEntry 10 } dlepNeighborMetricsMdrRx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighbor radio Maximum Data Rate (Receive) (MDRR), this data item is used to indicate the maximum theoretical data rate, in bits per second (bps), that can be achieved while receiving data on the link." ::= { dlepNeighborEntry 11 } dlepNeighborMetricsMdrTx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighbor radio Maximum Data Rate (Transmit) (MDRT), this data item is used to indicate the maximum theoretical data rate, in bits per second, that can be achieved while transmitting data on the link." ::= { dlepNeighborEntry 12 } dlepNeighborMetricsRlqRx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighbor Relative Link Quality (Receive) (RLQR), This data item is used to indicate the quality of the link to a destination for receiving traffic, with 0 meaning ’worst quality’ and 100 meaning ’best quality’." ::= { dlepNeighborEntry 13 } dlepNeighborMetricsRlqTx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighbor Relative Link Quality (Transmit) (RLQT), This data item is used to indicate the quality of the link to a destination for transmitting traffic, with 0 meaning ’worst quality’ and 100 meaning ’best quality’." ::= { dlepNeighborEntry 14 } dlepNeighborMetricsLatency OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighbor radio Latency to indicate the amount of latency, in microseconds, on the link. The Latency value is reported as transmission delay." ::= { dlepNeighborEntry 15 } dlepNeighborMetricsResources OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighbor Resources (RES), this data item is used to indicate the amount of finite resources available for data transmission and reception at the destination as a percentage, with 0 meaning ’no resources remaining’ and 100 meaning ’a full supply’." ::= { dlepNeighborEntry 16 } dlepNeighborMetricsVac OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighborMetricsVac, this data item contains radio Virtual-Access Number information." ::= { dlepNeighborEntry 17 } dlepNeighborMetricsMacAddress OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighbor MAC Address data item contains the address of the destination on the remote node." ::= { dlepNeighborEntry 18 } dlepNeighborSessionOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), forcedDown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the dlep neighbor. up - Connected and operational. down - Not connected to a neighboring router or administrative down. forcedDown - Shut down by dlep manager due to mismatch or dlep neighbor errors." ::= { dlepNeighborEntry 19 } -- -- The DLEP Client Group -- dlepClientTable OBJECT-TYPE SYNTAX SEQUENCE OF DlepClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing DLEP Client Info." ::= { dlepClient 1 } dlepClientEntry OBJECT-TYPE SYNTAX DlepClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the dlepClientTable, containing the information of DLEP client." INDEX { dlepClientInterfaceIndex } ::= { dlepClientTable 1 } DlepClientEntry ::= SEQUENCE { dlepClientInterfaceIndex InterfaceIndex, dlepClientInterfaceName DisplayString, dlepClientPeerId Integer32, dlepNeighborCount Integer32, dlepClientDescription DisplayString, dlepClientAddressType CiscoNetworkProtocol, dlepClientLocalAddress CiscoNetworkAddress, dlepClientLocalRadioAddress CiscoNetworkAddress, dlepClientUpTime TimeTicks, dlepClientMetricsCdrRx Integer32, dlepClientMetricsCdrTx Integer32, dlepClientMetricsMdrRx Integer32, dlepClientMetricsMdrTx Integer32, dlepClientMetricsRlqRx Integer32, dlepClientMetricsRlqTx Integer32, dlepClientMetricsLatency Integer32, dlepClientMetricsResources Integer32, dlepClientMetricsMTU Integer32, dlepClientPort Integer32, dlepClientConfigVT Integer32, dlepClientConfigHeartBeat Integer32, dlepClientConfigDeadInterval Integer32, dlepClientConfigTerminate Integer32, dlepConfigNeighborDown Integer32, dlepClientSessionOperStatus Integer32, dlepClientMetricsSummary DisplayString, dlepClientConfigSummary DisplayString } dlepClientInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientInterfaceIndex, this data item contains client interface snmp index." ::= { dlepClientEntry 1 } dlepClientInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientInterfaceName, this data item contains Interface Name on which dlep client session is established." ::= { dlepClientEntry 2 } dlepClientPeerId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientPeerId, this data item contains Client Peer Id." ::= { dlepClientEntry 3 } dlepNeighborCount OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepNeighborCount, this data item contains the number of neighbors connected to client." ::= { dlepClientEntry 4 } dlepClientDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientDescription, this data item contains the description of client" ::= { dlepClientEntry 5 } dlepClientAddressType OBJECT-TYPE SYNTAX CiscoNetworkProtocol MAX-ACCESS read-only STATUS current DESCRIPTION " An indication of the type of address contained in the corresponding instance of dlepClientAddress." ::= { dlepClientEntry 6 } dlepClientLocalAddress OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientLocalAddress, this data item contains the Local Client Address." ::= { dlepClientEntry 7 } dlepClientLocalRadioAddress OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientLocalRadioAddress, this data item contains the local client radio address." ::= { dlepClientEntry 8 } dlepClientUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClient UpTime, this data item contains client up time." ::= { dlepClientEntry 9 } dlepClientMetricsCdrRx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The client radio Current Data Rate (Receive) (CDRR), this data item is used to indicate the rate at which the link is currently operating for receiving traffic." ::= { dlepClientEntry 10 } dlepClientMetricsCdrTx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The client radio Current Data Rate (Transmit) (CDRT), this data item is used to indicate the rate at which the link is currently operation for tansmiting traffic" ::= { dlepClientEntry 11 } dlepClientMetricsMdrRx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClient radio Maximum Data Rate (Receive) (MDRR), this data item is used to indicate the maximum theoretical data rate, in bits per second (bps), that can be achieved while receiving data on the link." ::= { dlepClientEntry 12 } dlepClientMetricsMdrTx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClient radio Maximum Data Rate (Transmit) (MDRT), this data item is used to indicate the maximum theoretical data rate, in bits per second, that can be achieved while transmitting data on the link." ::= { dlepClientEntry 13 } dlepClientMetricsRlqRx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClient Relative Link Quality (Receive) (RLQR), This data item is used to indicate the quality of the link to a destination for receiving traffic, with 0 meaning ’worst quality’ and 100 meaning ’best quality’." ::= { dlepClientEntry 14 } dlepClientMetricsRlqTx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClient Relative Link Quality (Transmit) (RLQT), This data item is used to indicate the quality of the link to a destination for transmitting traffic, with 0 meaning ’worst quality’ and 100 meaning ’best quality’." ::= { dlepClientEntry 15 } dlepClientMetricsLatency OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClient radio Latency to indicate the amount of latency, in microseconds, on the link. The Latency value is reported as transmission delay." ::= { dlepClientEntry 16 } dlepClientMetricsResources OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClient Resources (RES), this data item is used to indicate the amount of finite resources available for data transmission and reception at the destination as a percentage, with 0 meaning ’no resources remaining’ and 100 meaning ’a full supply’." ::= { dlepClientEntry 17 } dlepClientMetricsMTU OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClient Maximum Transmission Unit (MTU), this data item is used to indicate the maximum size, in octets, of an IP packet that can be transmitted without fragmentation, including headers, but excluding any lower-layer headers." ::= { dlepClientEntry 18 } dlepClientPort OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientPort, this data item contains the TCP port number on the modem available for connections." ::= { dlepClientEntry 19 } dlepClientConfigVT OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientConfigVT, this data item contains number of Virtual Template." ::= { dlepClientEntry 20 } dlepClientConfigHeartBeat OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientConfigHeartBeat, this data item is used to specify a period in milliseconds for radio client heartbeat configuration." ::= { dlepClientEntry 21 } dlepClientConfigDeadInterval OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientConfigDeadInterval, this data item is used to specify a period in milliseconds for radio client dead interval configuration." ::= { dlepClientEntry 22 } dlepClientConfigTerminate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientConfigTerminate, this data item contains radio client Teminate ack configuration inerval." ::= { dlepClientEntry 23 } dlepConfigNeighborDown OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigNeighborDown, this data item contains radio neighbor down ack configuartion." ::= { dlepClientEntry 24 } dlepClientSessionOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), forcedDown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the dlep client session. up - Connected and operational. down - Not connected to a neighboring router or administrative down. forcedDown - Shut down by dlep manager due to mismatch or dlep client session errors." ::= { dlepClientEntry 25 } dlepClientMetricsSummary OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientMetricsSummary, this data item contains summary of client information. That is ClientIpaddress,RLQR,RLQT, CDRR,CDRT,MDRR,MDRT,Latency,Resource." ::= { dlepClientEntry 26 } dlepClientConfigSummary OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepClientConfigSummary , this data item contails the information about client configuration that is Ipaddress,port,VirtualTemplate,HeartbeatTimer,DeadInterval, TerminateACK,NeighborDownTimer." ::= { dlepClientEntry 27 } -- -- The DLEP Configuration Group -- dlepConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DlepConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The (conceptual) table containing DLEP Config Info." ::= { dlepConfig 1 } dlepConfigEntry OBJECT-TYPE SYNTAX DlepConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry (conceptual row) in the dlepConfigTable, containing the information of DLEP config." INDEX { dlepConfigInterfaceIndex } ::= { dlepConfigTable 1 } DlepConfigEntry ::= SEQUENCE { dlepConfigInterfaceIndex InterfaceIndex, dlepConfigInterfaceName DisplayString, dlepConfigPeerInterfaceDescription DisplayString, dlepConfigLocalAddressType CiscoNetworkProtocol, dlepConfigLocalAddress CiscoNetworkAddress, dlepConfigLocalTCPPort Integer32, dlepConfigLocalUDPPort Integer32, dlepConfigRemoteAddressType CiscoNetworkProtocol, dlepConfigRemoteAddress CiscoNetworkAddress, dlepConfigRemoteTCPPort Integer32, dlepConfigRemoteUDPPort Integer32, dlepConfigSessionMode DisplayString, dlepConfigVirtualTemplate Integer32, dlepConfigMissedHeartbeatThreshold Integer32, dlepConfigHeartbeatInterval Integer32, dlepConfigDiscoveryInterval Integer32, dlepConfigSessionAckTimeout Integer32, dlepConfigPeerTerminateAckTimeout Integer32, dlepConfigNeighborDownAckTimeout Integer32, dlepConfigSummary DisplayString } dlepConfigInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigInterfaceIndex, this data item contains config interface snmp index." ::= { dlepConfigEntry 1 } dlepConfigInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigInterfaceName, this data item contains dlep enabled interface name." ::= { dlepConfigEntry 2 } dlepConfigPeerInterfaceDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigPeerInterfaceDescription, this data item contains the dlep peer interface description." ::= { dlepConfigEntry 3 } dlepConfigLocalAddressType OBJECT-TYPE SYNTAX CiscoNetworkProtocol MAX-ACCESS read-only STATUS current DESCRIPTION " An indication of the type of address contained in the corresponding instance of dlepConfigLocalAddress." ::= { dlepConfigEntry 4 } dlepConfigLocalAddress OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigLocalAddress, this data item contains configuration of Local Address." ::= { dlepConfigEntry 5 } dlepConfigLocalTCPPort OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigLocalTCPPort, this data item contains Local TCP port number." ::= { dlepConfigEntry 6 } dlepConfigLocalUDPPort OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigiLocalUDPPort, this data item contains Local UDP port number." ::= { dlepConfigEntry 7 } dlepConfigRemoteAddressType OBJECT-TYPE SYNTAX CiscoNetworkProtocol MAX-ACCESS read-only STATUS current DESCRIPTION " An indication of the type of address contained in the corresponding instance of dlepConfigRemoteAddress." ::= { dlepConfigEntry 8 } dlepConfigRemoteAddress OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigRemoteAddress, this data item contains configuration of Remote Address." ::= { dlepConfigEntry 9 } dlepConfigRemoteTCPPort OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigRemoteTCPPort, this data iteam contains configuration of Remote TCP port." ::= { dlepConfigEntry 10 } dlepConfigRemoteUDPPort OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigRemoteUDPPort, this data iteam contains configuration of Remote UDP port number." ::= { dlepConfigEntry 11 } dlepConfigSessionMode OBJECT-TYPE SYNTAX INTEGER { manual-v4(1), manual-v6(2), auto-v4(3), auto-v6(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigSessionMode, this data iteam contains the IP configuration mode which can be either of this values: manual-v4/manual-v6/auto-v4/auto-v6." ::= { dlepConfigEntry 12 } dlepConfigVirtualTemplate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigVirtualTemplace, this data item contains Virtual Template Number." ::= { dlepConfigEntry 13 } dlepConfigMissedHeartbeatThreshold OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigMissedHeartbeatThreshold, this data item contains configuration of Missed heartbeat threshold." ::= { dlepConfigEntry 14 } dlepConfigHeartbeatInterval OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigHeartbeatInterval, this data item contains configuration of heart beat interval." ::= { dlepConfigEntry 15 } dlepConfigDiscoveryInterval OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigDiscoveryInterval, this data item contains configuration of discovery interval." ::= { dlepConfigEntry 16 } dlepConfigSessionAckTimeout OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigSessionAckTimeout, this data item contains configuration of Session ack timeout." ::= { dlepConfigEntry 17 } dlepConfigPeerTerminateAckTimeout OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigPeerTerminateAckTimeout, this data item contains configuration of peer terminate ack timeout." ::= { dlepConfigEntry 18 } dlepConfigNeighborDownAckTimeout OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigNeighborDownAckTimeout, this data item contains configuration of neighbor down ack timeout." ::= { dlepConfigEntry 19 } dlepConfigSummary OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepConfigSummary, this data item contains configuration summary that is Localserver,configversion,tcpport,udpport, virtualtemplate,heartthreshold,heartinterval,discoveryinterval, sessionack,peerterminateack,neighbordownack." ::= { dlepConfigEntry 20 } -- -- The DLEP Counters Group -- dlepCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF DlepCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing DLEP Counters Info." ::= { dlepCounters 1 } dlepCountersEntry OBJECT-TYPE SYNTAX DlepCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the dlepCountersTable, containing the details of DLEP counters." INDEX { dlepCounterInterfaceIndex } ::= { dlepCountersTable 1 } DlepCountersEntry ::= SEQUENCE { dlepCounterInterfaceIndex InterfaceIndex, dlepCounterInterfaceName DisplayString, dlepCounterLastClearTime DisplayString, dlepCounterLocalIpType CiscoNetworkProtocol, dlepCounterLocalIp CiscoNetworkAddress, dlepCounterLocalUDPPort Integer32, dlepCounterLocalTCPPort Integer32, dlepCounterRXPeerDiscovery Integer32, dlepCounterRXPeerOffer Integer32, dlepCounterRXPeerInit Integer32, dlepCounterRXPeerInitAck Integer32, dlepCounterRXHeartbeat Integer32, dlepCounterRXPeerTerminate Integer32, dlepCounterRXPeerTerminateAck Integer32, dlepCounterTXPeerOffer Integer32, dlepCounterTXPeerDiscovery Integer32, dlepCounterTXPeerInitAck Integer32, dlepCounterTXPeerInit Integer32, dlepCounterTXHeartbeat Integer32, dlepCounterTXPeerTerminateAck Integer32, dlepCounterTXPeerTerminate Integer32, dlepCounterRXNeighborUp Integer32, dlepCounterRXMetric Integer32, dlepCounterRXNeighborDown Integer32, dlepCounterRXNeighborDownAck Integer32, dlepCounterTXNeighborUpAck Integer32, dlepCounterTXNeighborDownAck Integer32, dlepCounterTXNeighborDown Integer32, dlepCounterRXInvalidMessage Integer32, dlepCounterPreExistingNeighbor Integer32, dlepCounterNeighborNotFound Integer32, dlepCounterRXUnknownMessage Integer32, dlepCounterNeighborResourceError Integer32, dlepCounterNeighborMsgPeerNotUp Integer32, dlepCounterPeerHeartbeatTimer Integer32, dlepCounterPeerTerminateAckTimer Integer32, dlepCounterNeighborTerminateAckTimer Integer32, dlepCounterRadioConnectTimer Integer32, dlepCountersPeersSummary DisplayString, dlepCountersNeighborsSummary DisplayString, dlepCountersExceptionsSummary DisplayString, dlepCountersTimersSummary DisplayString, dlepLocalCountersSummary DisplayString } dlepCounterInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterInterfaceIndex, this data item contains counter interface snmp index." ::= { dlepCountersEntry 1 } dlepCounterInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterInterfaceName, this data item contains dlep enabled interface name." ::= { dlepCountersEntry 2 } dlepCounterLastClearTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterLastClearTime, this data item contains dlep last clear time." ::= { dlepCountersEntry 3 } dlepCounterLocalIpType OBJECT-TYPE SYNTAX CiscoNetworkProtocol MAX-ACCESS read-only STATUS current DESCRIPTION " An indication of the type of address contained in th corresponding instance of dlepCounterLocalIp." ::= { dlepCountersEntry 4 } dlepCounterLocalIp OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterLocalIp, this data item contains configuration of Local Ip." ::= { dlepCountersEntry 5 } dlepCounterLocalTCPPort OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterLocalTCPPort, this data item contains Local TCP port number." ::= { dlepCountersEntry 6 } dlepCounterLocalUDPPort OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterLocalUDPPort, this data item contains Local UDP port number." ::= { dlepCountersEntry 7 } dlepCounterRXPeerDiscovery OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXPeerDiscovery, this data item contains RX Peer Discovery counter." ::= { dlepCountersEntry 8 } dlepCounterRXPeerOffer OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXPeerOffer, this data item contains RX Peer Offer counter." ::= { dlepCountersEntry 9 } dlepCounterRXPeerInit OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXPeerInit, this data item contains RX Peer Init counter." ::= { dlepCountersEntry 10 } dlepCounterRXPeerInitAck OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXPeerInitAck, this data item contains RX Peer Init Ack counter." ::= { dlepCountersEntry 11 } dlepCounterRXHeartbeat OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXHeartbeat, this data item contains RX Heartbeat counter." ::= { dlepCountersEntry 12 } dlepCounterRXPeerTerminate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXPeerTerminate, this data item contains RX Peer Terminate counter." ::= { dlepCountersEntry 13 } dlepCounterRXPeerTerminateAck OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXPeerTerminateAck, this data item contains RX Peer Terminate Ack counter." ::= { dlepCountersEntry 14 } dlepCounterTXPeerOffer OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterTXPeerOffer, this data item contains TX Peer Offer counter." ::= { dlepCountersEntry 15 } dlepCounterTXPeerDiscovery OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterTXPeerDiscovery, this data item contains TX Peer Discovery counter." ::= { dlepCountersEntry 16 } dlepCounterTXPeerInitAck OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterTXPeerInitAck, this data item contains TX Peer Init Ack counter." ::= { dlepCountersEntry 17 } dlepCounterTXPeerInit OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterTXPeerInit, this data item contains TX Peer Init counter." ::= { dlepCountersEntry 18 } dlepCounterTXHeartbeat OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterTXHeartbeat, this data item contains TX Heartbeat counter." ::= { dlepCountersEntry 19 } dlepCounterTXPeerTerminateAck OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterTXPeerTerminateAck, this data item contains TX Peer Terminate Ack counter." ::= { dlepCountersEntry 20 } dlepCounterTXPeerTerminate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterTXPeerTerminate, this data item contains TX Peer Terminate counter." ::= { dlepCountersEntry 21 } dlepCounterRXNeighborUp OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXNeighborUp, this data item contains RX Neighbor Up counter." ::= { dlepCountersEntry 22 } dlepCounterRXMetric OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXMetric, this data item contains RX Metric counter." ::= { dlepCountersEntry 23 } dlepCounterRXNeighborDown OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXNeighborDown, this data item contains RX Neighbor Down counter." ::= { dlepCountersEntry 24 } dlepCounterRXNeighborDownAck OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXNeighborDownAck, this data item contains RX Neighbor Down Ack counter." ::= { dlepCountersEntry 25 } dlepCounterTXNeighborUpAck OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterTXNeighborUpAck, this data item contains TX Neighbor Up Ack counter." ::= { dlepCountersEntry 26 } dlepCounterTXNeighborDownAck OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterTXNeighborDownAck, this data item contains TX Neighbor Down Ack counter." ::= { dlepCountersEntry 27 } dlepCounterTXNeighborDown OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterTXNeighborDown, this data item contains TX Neighbor Down counter." ::= { dlepCountersEntry 28 } dlepCounterRXInvalidMessage OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXInvalidMessage, this data item contains RX Invalid Message counter." ::= { dlepCountersEntry 29 } dlepCounterPreExistingNeighbor OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterPreExistingNeighbor, this data item contains PreExisting Neighbor counter." ::= { dlepCountersEntry 30 } dlepCounterNeighborNotFound OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterNeighborNotFound, this data item contains Neighbor Not Found counter." ::= { dlepCountersEntry 31 } dlepCounterRXUnknownMessage OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRXUnknownMessage, this data item contains RX Unknown Message counter." ::= { dlepCountersEntry 32 } dlepCounterNeighborResourceError OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterNeighborResourceError, this data item contains Neighbor Resource Error counter." ::= { dlepCountersEntry 33 } dlepCounterNeighborMsgPeerNotUp OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterNeighborMsgPeerNotUp, this data item contains Neighbor Msg Peer Not Up counter." ::= { dlepCountersEntry 34 } dlepCounterPeerHeartbeatTimer OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterPeerHeartbeatTimer, this data item contains Peer Heartbeat Timer counter." ::= { dlepCountersEntry 35 } dlepCounterPeerTerminateAckTimer OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterPeerTerminateAckTimer, this data item contains Peer Terminate Ack Timer counter." ::= { dlepCountersEntry 36 } dlepCounterNeighborTerminateAckTimer OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterNeighborTerminateAckTimer, this data item contains Neighbor Terminate Ack Timer counter." ::= { dlepCountersEntry 37 } dlepCounterRadioConnectTimer OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCounterRadioConnectTimer, this data item contains Radio Connect Timer counter." ::= { dlepCountersEntry 38 } dlepCountersPeersSummary OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCountersPeersSummary, this data item contains peer counters information on local Servers running DLEP on an interface, that is RXPeerDiscovery,RXPeerOffer,RXPeerInit, RXPeerInitAck,RXHeartbeat,RXPeerTerminate,RXPeerTerminateAck, TXPeerOffer,TXPeerDiscovery,TXPeerInitAck,TXPeerInit, TXHeartbeat,TXPeerTerminateAck,TXPeerTermiante." ::= { dlepCountersEntry 39 } dlepCountersNeighborsSummary OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCountersNeighborsSummary, this data iteam contains neighbor counters information on local servers running DLEP on an inerface, that is Localserver,UDPport,interface, RXNeighborUp,RxMetric,RXNeighborDown,RxNeighborDownAck, TXNeighborUPAck,TXNeighborDownAck,TXNeighborDown." ::= { dlepCountersEntry 40 } dlepCountersExceptionsSummary OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCountersExceptionsSummary, this data iteam contains exceptions counters information on local servers running DLEP on an inerface, that is Localserver,UDPport,interface, RxInvalidMessage,Pre-ExistingNeighbor,NeighborNotFound, RxUnknownMessage,NeighborResourceError,NeighborMsgPeerNotUp." ::= { dlepCountersEntry 41 } dlepCountersTimersSummary OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepCountersTimersSummary, this data iteam contains Timers summary information on local servers running DLEP on an inerface, that is Localserver,UDPport,interface, PeerHeartbeatTimer,PeerTerminateAckTimer,NeighborTerminateAckTimer, RadioConnectTimer." ::= { dlepCountersEntry 42 } dlepLocalCountersSummary OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION " The dlepLocalCountersSummary, this data iteam contains peer counters summary on local server. that is Localserver,udpPort,interface,RxPeerDiscovery,RxPeerOffer, RXPeerInit,RXPeerInitAck,RXHeartbeat,RXPeerTerminate, RXPeerTerminateAck,TXPeerOffer,TXPeerDiscovery,TXPeerInitAck, TXPeerInit,TXHeartbeat,TXPeerTerminateAck,TXPeerTermiante, RXNeighborUp,RxMetric,RXNeighborDown,RXNeighborDownAck, TXNeighborUPack,TXNeighborDownAck,TXNeighborDown, RXInvalidMessage,Pre-ExistingNeighbor,NeighborNotFound, RXUknownMessage,NeighborREsourceError,NeighborMesgPeerNotup, PeerHeartbeatTimer,PeerTerminateAckTimer, NeighborTerminateAckTimer,RadioConnectTimer." ::= { dlepCountersEntry 43 } END