1879 lines
76 KiB
Plaintext
1879 lines
76 KiB
Plaintext
|
|
--------------------------------------------------------------------------
|
|
-- File Name : ZTE-AN-EVENT-MIB.mib
|
|
-- Date : 2007-01-25
|
|
-- Author : ZTE Nms dept.
|
|
|
|
--
|
|
-- Zte Adsl Mib for Access Node
|
|
--
|
|
--
|
|
--------------------------------------------------------------------------
|
|
|
|
|
|
ZTE-AN-ADSL-LINE-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
TimeTicks,Counter32, Gauge32,Unsigned32,
|
|
NOTIFICATION-TYPE ,Integer32 FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
ifIndex FROM IF-MIB
|
|
adslLineConfProfileName,
|
|
adslLineConfProfileEntry,adslLineAlarmConfProfileEntry,
|
|
adslAtucChanConfInterleaveMaxTxRate,adslAtucChanCurrTxRate,
|
|
adslAturChanConfInterleaveMaxTxRate,adslAturChanCurrTxRate,
|
|
adslAtucChanIntervalEntry,adslAturChanIntervalEntry
|
|
FROM ADSL-LINE-MIB
|
|
RowStatus FROM SNMPv2-TC
|
|
zxAn FROM ZTE-AN-TC-MIB;
|
|
|
|
|
|
-- ZTE Dsl line ext MIB objects
|
|
|
|
zxAnAdslMib MODULE-IDENTITY
|
|
LAST-UPDATED "200701251300Z"
|
|
ORGANIZATION "zte dsl product line"
|
|
CONTACT-INFO
|
|
" su chunshan
|
|
Mail: suchunshan@zte.com.cn
|
|
Tel : 021-68896292,68896251"
|
|
DESCRIPTION
|
|
"This mib defines extended dsl line mo (managed object ) for adsl2,
|
|
adsl+ and dsl loop test.
|
|
|
|
Naming Conventions:
|
|
Atuc -- (ATUC) modem at near (Central) end of line
|
|
Atur -- (ATUR) modem at Remote end of line "
|
|
::= {zxAn 1000}
|
|
|
|
|
|
zxAnAdslMibObjects OBJECT IDENTIFIER ::= { zxAnAdslMib 1 }
|
|
|
|
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Following objects are defined.
|
|
-- Adsl Line Extended Table
|
|
-- Adsl Line Config Profile Extended Table
|
|
-- Atuc Channel Table
|
|
-- Atur Channel Table
|
|
-- Adsl Line Alarm Profile Extended Table
|
|
-- Atuc Performance Data Table
|
|
-- Atur Performance Data Table
|
|
-- Atuc Channel Performance Data Table
|
|
-- Atur Channel Performance Data Table
|
|
-- Atuc Channel Interval Performance Table
|
|
-- Atur Channel Interval Performance Table
|
|
-- Atuc Channel history 1 Day Performance Table
|
|
-- Atur Channel history 1 Day Performance Table
|
|
-- Dsl Loopback Test Table
|
|
-- trap definitions
|
|
--------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Adsl Line Extended Table
|
|
------------------------------------------------------------------------------
|
|
|
|
zxAnAdslLineTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslLineEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adsl line additional information table."
|
|
::= {zxAnAdslMibObjects 1}
|
|
|
|
|
|
zxAnAdslLineEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslLineEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adsl line additional information entry"
|
|
INDEX { ifIndex }
|
|
::= {zxAnAdslLineTable 1}
|
|
|
|
|
|
ZxAnAdslLineEntry ::=
|
|
SEQUENCE {
|
|
zxAnAdslLineTxDataRate Gauge32,
|
|
zxAnAdslLineRxDataRate Gauge32,
|
|
zxAnAdslAtucActInp Integer32,
|
|
zxAnAdslAturActInp Integer32,
|
|
zxAnAdslLineExtConfPrf SnmpAdminString
|
|
}
|
|
|
|
zxAnAdslLineTxDataRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmitted net data rate on this line."
|
|
::= { zxAnAdslLineEntry 1 }
|
|
|
|
zxAnAdslLineRxDataRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Recieved net data rate on this line."
|
|
::= { zxAnAdslLineEntry 2 }
|
|
|
|
|
|
zxAnAdslAtucActInp OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
UNITS "0.1 symbols"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual impulse noise protection.
|
|
This parameter reports the actual impulse noise
|
|
protection (INP) on the channel in the L0
|
|
state. In the L1 or L2 state, the parameter contains the
|
|
INP in the previous L0 state.
|
|
"
|
|
::= { zxAnAdslLineEntry 3 }
|
|
|
|
|
|
zxAnAdslAturActInp OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
UNITS "0.1 symbols"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual impulse noise protection.
|
|
This parameter reports the actual impulse noise
|
|
protection (INP) on the channel in the L0
|
|
state. In the L1 or L2 state, the parameter contains the
|
|
INP in the previous L0 state.
|
|
"
|
|
::= { zxAnAdslLineEntry 4 }
|
|
|
|
zxAnAdslLineExtConfPrf OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the row in the XDSL2
|
|
Line Ext Profile Table, (zxAnXdsl2LnExtConfPrfTable),
|
|
which applies for this line."
|
|
::= { zxAnAdslLineEntry 5 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Adsl Line Config Profile Extended Table
|
|
------------------------------------------------------------------------------
|
|
|
|
|
|
zxAnAdslLineConfProfileExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslLineConfProfileExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adsl line config profile extended information table."
|
|
::= {zxAnAdslMibObjects 2}
|
|
|
|
|
|
zxAnAdslLineConfProfileExtEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslLineConfProfileExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry extends the adslLineConfProfileEntry defined in
|
|
[RFC2662]. Each entry corresponds to an ADSL line profile."
|
|
|
|
AUGMENTS { adslLineConfProfileEntry }
|
|
::= {zxAnAdslLineConfProfileExtTable 1}
|
|
|
|
|
|
ZxAnAdslLineConfProfileExtEntry ::=
|
|
SEQUENCE {
|
|
zxAnAdslLineConfTxStartBin Integer32,
|
|
zxAnAdslLineConfTxEndBin INTEGER,
|
|
zxAnAdslLineConfRxStartBin Integer32,
|
|
zxAnAdslLineConfRxEndBin INTEGER,
|
|
zxAnAdslLineConfUseCustomBins INTEGER,
|
|
zxAnAdslAtucConfPsdMaskType Integer32,
|
|
zxAnAdslLineConfPMMode BITS,
|
|
zxAnAdslLineConfPML2Rate INTEGER,
|
|
zxAnAdsl2ConfMinProtectionDs INTEGER,
|
|
zxAnAdslLineConfMinProtectionUs INTEGER,
|
|
zxAnAdslConfDMTConfTrellis INTEGER,
|
|
zxAnAdslAtucConfMaxBitsPerBin INTEGER,
|
|
zxAnAdslAtucConfBitSwapDs INTEGER,
|
|
zxAnAdslAtucConfBitSwapUs INTEGER,
|
|
zxAnAdslAtucConfReAdsl2Enable INTEGER,
|
|
zxAnAdslAtucConfPmL0Time INTEGER,
|
|
zxAnAdslAtucConfPmL2Time INTEGER,
|
|
zxAnAdslAtucConfPmL2Atpr INTEGER,
|
|
zxAdsl2ConfPsdMaskSelectUs INTEGER
|
|
}
|
|
|
|
|
|
zxAnAdslLineConfTxStartBin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies lowest bin number allowed for Tx signal.
|
|
Different line coding type has different default value.
|
|
0x20 (default for Annex A only)
|
|
0x20 (default for ADSL2/ADSL2plus)
|
|
0x06 (default for Annex A if G.Span and/or G.Span Plus are also defined)
|
|
0x40 (default for Annex B)
|
|
0x06 (default for Annex C/C.x)
|
|
0x06 (default for G.Span)
|
|
0x06 (default for G.Span Plus)"
|
|
::= { zxAnAdslLineConfProfileExtEntry 1 }
|
|
|
|
zxAnAdslLineConfTxEndBin OBJECT-TYPE
|
|
SYNTAX INTEGER(0..512)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies highest bin number allowed for Tx signal.
|
|
Default = 0x3ff (default for all Annexes and ADSL2/ADSL2plus)"
|
|
::= { zxAnAdslLineConfProfileExtEntry 2 }
|
|
|
|
|
|
|
|
zxAnAdslLineConfRxStartBin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies lowest bin number allowed for Rx signal.
|
|
Different line coding type has different default value.
|
|
0x06 (default for Annex A)
|
|
0x01 (default for Annex B)
|
|
0x06 (default for Annex C/C.x)
|
|
0x06 (default for G.Span/ADSL+)
|
|
0x06 (default for G.Span Plus)
|
|
0x06 (default for ADSL2/ADLS2plus) "
|
|
::= { zxAnAdslLineConfProfileExtEntry 3 }
|
|
|
|
|
|
|
|
zxAnAdslLineConfRxEndBin OBJECT-TYPE
|
|
SYNTAX INTEGER(0..512)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies highest bin number allowed for Rx signal.
|
|
Default = 0x3f (default for all Annexes and ADSL2/ADLS2plus)"
|
|
::= { zxAnAdslLineConfProfileExtEntry 4 }
|
|
|
|
|
|
zxAnAdslLineConfUseCustomBins OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1), -- enable use custom Bins
|
|
disable(2) -- disable use custom Bins
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable custom bin selection for upstream/downstream
|
|
transmission. This parameter is used in conjunction with the
|
|
adslAtucDMTConfFreqBins and
|
|
adslAturDMTConfFreqBins[ADSL-DMT-LINE-MIB] parameter."
|
|
DEFVAL { 2 }
|
|
::= { zxAnAdslLineConfProfileExtEntry 5 }
|
|
|
|
zxAnAdslAtucConfPsdMaskType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" It is supported by G.Span. Dsl card team will provide files
|
|
about it in details."
|
|
::= { zxAnAdslLineConfProfileExtEntry 6 }
|
|
|
|
zxAnAdslLineConfPMMode OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
idle (0),
|
|
lowPower(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This configuration parameter defines the line states the ATU-C
|
|
may autonomously transition to on this line. It is coded in a
|
|
bit map representation (0 if not allowed, 1 if allowed) with
|
|
following definition:
|
|
Bit 0 L3 state (Idle state)
|
|
Bit 1 L1/L2 state (Low power state)."
|
|
|
|
REFERENCE "Section 7.3.1.1.4 ITU G.997.1(05/2003) "
|
|
::= { zxAnAdslLineConfProfileExtEntry 7 }
|
|
|
|
|
|
zxAnAdslLineConfPML2Rate OBJECT-TYPE
|
|
SYNTAX INTEGER (256..1024)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PM configuration parameter,related to the L2 low power state.
|
|
This parameter specifies the minimum net data rate during the
|
|
low power state (L2)."
|
|
|
|
REFERENCE "Section 7.3.2.1.5 ITU G.997.1(05/2003) "
|
|
::= { zxAnAdslLineConfProfileExtEntry 8 }
|
|
|
|
zxAnAdsl2ConfMinProtectionDs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
autoAdaption (0),
|
|
noProtection (1),
|
|
halfSymbol (2),
|
|
singleSymbol (3),
|
|
twoSymbols (4),
|
|
fourSymbols (5),
|
|
eightSymbols (6),
|
|
sixteenSymbols (7)
|
|
}
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum Impulse Noise Protection on Downstream direction. The
|
|
minimum impulse noise protection for the bearer channel,
|
|
expressed in symbols. The parameter can take the following
|
|
values: noProtection (i.e., INP not required), halfSymbol
|
|
(i.e., INP length is 1/2 symbol) and 1-16 symbols in steps
|
|
of 1 symbol."
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3"
|
|
DEFVAL { halfSymbol }
|
|
::= { zxAnAdslLineConfProfileExtEntry 9 }
|
|
|
|
zxAnAdslLineConfMinProtectionUs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
autoAdaption (0),
|
|
noProtection (1),
|
|
halfSymbol (2),
|
|
singleSymbol (3),
|
|
twoSymbols (4),
|
|
fourSymbols (5),
|
|
eightSymbols (6),
|
|
sixteenSymbols (7)
|
|
}
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Minimum Impulse Noise Protection on Upstream direction. The
|
|
minimum impulse noise protection for the bearer channel,
|
|
expressed in symbols. "
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3"
|
|
DEFVAL { halfSymbol }
|
|
::= { zxAnAdslLineConfProfileExtEntry 10 }
|
|
|
|
|
|
zxAnAdslConfDMTConfTrellis OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Parameter that enable or disable trellis coding. Trellis coding
|
|
should always be enabled for its clear performance advantage.
|
|
Trellis coding is mandatory for ADSL/ADSL2plus.
|
|
The value enable(1) is default for all Annexes and ADSL2/ADSL2plus."
|
|
DEFVAL { enable }
|
|
::= { zxAnAdslLineConfProfileExtEntry 11 }
|
|
|
|
zxAnAdslAtucConfMaxBitsPerBin OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies maximum Rx number of bits per bin."
|
|
DEFVAL { 15 }
|
|
::= { zxAnAdslLineConfProfileExtEntry 12 }
|
|
|
|
zxAnAdslAtucConfBitSwapDs OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"enables/disables downstream bit swapping.
|
|
Different line coding type has different default value.
|
|
disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C
|
|
C.x, G.Span/ADSL+ and G.Span Plus)
|
|
enable(1) (default for Annex A) "
|
|
DEFVAL { disable }
|
|
::= { zxAnAdslLineConfProfileExtEntry 13 }
|
|
|
|
zxAnAdslAtucConfBitSwapUs OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"enables/disables upstream bit swapping.
|
|
Different line coding type has different default value.
|
|
disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C
|
|
C.x, G.Span/ADSL+ and G.Span Plus)
|
|
enable(1) (default for Annex A) "
|
|
DEFVAL { disable }
|
|
::= { zxAnAdslLineConfProfileExtEntry 14 }
|
|
|
|
|
|
zxAnAdslAtucConfReAdsl2Enable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines whether downstream READSL2 operation should be forced
|
|
by the ATU-C."
|
|
REFERENCE "Section 6.10.1 on page 66,Annex L ITU G.992.3"
|
|
DEFVAL { disable }
|
|
::= { zxAnAdslLineConfProfileExtEntry 15 }
|
|
|
|
zxAnAdslAtucConfPmL0Time OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PM configuration parameter,related to the L2 low power state.
|
|
This parameter represents the minimum time between an exit from
|
|
the L2 state and the next entry into the L2 state. "
|
|
REFERENCE "Section 7.3.1.1.5 ITU G.997.1(05/2003) "
|
|
DEFVAL { 240 }
|
|
::= { zxAnAdslLineConfProfileExtEntry 16 }
|
|
|
|
zxAnAdslAtucConfPmL2Time OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PM configuration parameter,related to the L2 low power state.
|
|
This parameter represents the minimum time between an entry into
|
|
the L2 state and the first Power Trim in the L2 state and between
|
|
two consecutive Power Trims in the L2 State."
|
|
REFERENCE "Section 7.3.1.1.6 ITU G.997.1(05/2003) "
|
|
DEFVAL { 120 }
|
|
::= { zxAnAdslLineConfProfileExtEntry 17 }
|
|
|
|
zxAnAdslAtucConfPmL2Atpr OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" PM configuration parameter,related to the L2 low power state.
|
|
This parameter represents the Maximum Aggregate Transmit Power
|
|
Reduction (in dB) that can be performed through a single Power
|
|
Trim in the L2 state. It ranges from 0 dB to 31 dB."
|
|
REFERENCE "Section 7.3.1.1.3 ITU G.997.1(05/2003) "
|
|
DEFVAL { 3 }
|
|
::= { zxAnAdslLineConfProfileExtEntry 18 }
|
|
|
|
zxAdsl2ConfPsdMaskSelectUs OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
adlu32Eu32(1),
|
|
adlu36Eu36(2),
|
|
adlu40Eu40(3),
|
|
adlu44Eu44(4),
|
|
adlu48Eu48(5),
|
|
adlu52Eu52(6),
|
|
adlu56Eu56(7),
|
|
adlu60Eu60(8),
|
|
adlu64Eu64(9)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The selected upstream PSD mask. This parameter is used only
|
|
for annexes J and M of G.992.3 and G.992.5, and the same
|
|
selection is used for all relevant enabled bits in
|
|
adslLineTransAtucConfig of ADSL-LINE-EXT-MIB.
|
|
|
|
adlu32Eu32 (1), - ADLU-32 / EU-32
|
|
adlu36Eu36 (2), - ADLU-36 / EU-36
|
|
adlu40Eu40 (3), - ADLU-40 / EU-40
|
|
adlu44Eu44 (4), - ADLU-44 / EU-44
|
|
adlu48Eu48 (5), - ADLU-48 / EU-48
|
|
adlu52Eu52 (6), - ADLU-52 / EU-52
|
|
adlu56Eu56 (7), - ADLU-56 / EU-56
|
|
adlu60Eu60 (8), - ADLU-60 / EU-60
|
|
adlu64Eu64 (9) - ADLU-64 / EU-61
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.11"
|
|
DEFVAL { adlu32Eu32 }
|
|
::= { zxAnAdslLineConfProfileExtEntry 19 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Atuc Channel Table
|
|
------------------------------------------------------------------------------
|
|
zxAnAdslAtucChanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslAtucChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each Atuc channel.
|
|
"
|
|
::= {zxAnAdslMibObjects 3}
|
|
|
|
zxAnAdslAtucChanEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslAtucChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adsl channel layer line actuals information entry"
|
|
INDEX { ifIndex }
|
|
::= {zxAnAdslAtucChanTable 1}
|
|
|
|
ZxAnAdslAtucChanEntry ::=
|
|
SEQUENCE {
|
|
zxAnAdslAtucChanInpEtr Unsigned32,
|
|
zxAnAdslAtucChanInpEftr Unsigned32,
|
|
zxAnAdslAtucChanInpMinEftr Unsigned32,
|
|
zxAnAdslAtucChanInpActDelay INTEGER
|
|
}
|
|
|
|
zxAnAdslAtucChanInpEtr OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..52000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters of downstream.
|
|
The expected throughput (ETR)."
|
|
::= { zxAnAdslAtucChanEntry 1 }
|
|
|
|
zxAnAdslAtucChanInpEftr OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..52000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters of downstream.
|
|
The error-free throughput (EFTR is defined as the average
|
|
bit-rate at the alpha1/beta1 reference point, of bits
|
|
originating from DTU's which have been detected to contain
|
|
no error at the moment of crossing the alpha1/beta1 reference
|
|
point."
|
|
::= { zxAnAdslAtucChanEntry 2 }
|
|
|
|
zxAnAdslAtucChanInpMinEftr OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..52000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters of downstream.
|
|
The minimum error-free throughput (EFTR_min is defined as the
|
|
minimum of the EFTR observed since the last reading of the
|
|
EFTR_min."
|
|
::= { zxAnAdslAtucChanEntry 3 }
|
|
|
|
zxAnAdslAtucChanInpActDelay OBJECT-TYPE
|
|
SYNTAX INTEGER(0..63)
|
|
UNITS "ms"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters of downstream.
|
|
If retransmission is used in a given transmit direction, this
|
|
Object is defined as the actual value of the time-independent
|
|
component of the delay between the alfa1 and beta1 reference
|
|
points.
|
|
This can be calculated as the minimum possible instantaneous
|
|
delay between the alfa1 and beta1 reference points, based on
|
|
the actual settings of the framing parameters."
|
|
::= { zxAnAdslAtucChanEntry 4 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Atur Channel Table
|
|
------------------------------------------------------------------------------
|
|
zxAnAdslAturChanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslAturChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR channel.
|
|
"
|
|
::= {zxAnAdslMibObjects 4}
|
|
|
|
|
|
zxAnAdslAturChanEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslAturChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adsl channel layer line actuals information entry"
|
|
INDEX { ifIndex }
|
|
::= {zxAnAdslAturChanTable 1}
|
|
|
|
|
|
ZxAnAdslAturChanEntry ::=
|
|
SEQUENCE {
|
|
zxAnAdslAturChanInpEtr Unsigned32,
|
|
zxAnAdslAturChanInpEftr Unsigned32,
|
|
zxAnAdslAturChanInpMinEftr Unsigned32,
|
|
zxAnAdslAturChanInpActDelay INTEGER
|
|
}
|
|
|
|
zxAnAdslAturChanInpEtr OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..52000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters of upstream.
|
|
The expected throughput (ETR)."
|
|
::= { zxAnAdslAturChanEntry 1 }
|
|
|
|
zxAnAdslAturChanInpEftr OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..52000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters of upstream..
|
|
The error-free throughput (EFTR is defined as the average
|
|
bit-rate at the alpha1/beta1 reference point, of bits
|
|
originating from DTU's which have been detected to contain
|
|
no error at the moment of crossing the alpha1/beta1 reference
|
|
point."
|
|
::= { zxAnAdslAturChanEntry 2 }
|
|
|
|
zxAnAdslAturChanInpMinEftr OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..52000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters of upstream.
|
|
The minimum error-free throughput (EFTR_min is defined as the
|
|
minimum of the EFTR observed since the last reading of the
|
|
EFTR_min."
|
|
::= { zxAnAdslAturChanEntry 3 }
|
|
|
|
zxAnAdslAturChanInpActDelay OBJECT-TYPE
|
|
SYNTAX INTEGER(0..63)
|
|
UNITS "ms"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters of upstream.
|
|
If retransmission is used in a given transmit direction, this
|
|
Object is defined as the actual value of the time-independent
|
|
component of the delay between the alfa1 and beta1 reference
|
|
points.
|
|
This can be calculated as the minimum possible instantaneous
|
|
delay between the alfa1 and beta1 reference points, based on
|
|
the actual settings of the framing parameters."
|
|
::= { zxAnAdslAturChanEntry 4 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Adsl Line Alarm Profile Extended Table
|
|
------------------------------------------------------------------------------
|
|
|
|
|
|
zxAnAdslLineAlarmConfProfileExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslLineAlarmConfProfileExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adsl line alarm config profile extended information table.
|
|
The cycle of thresholds monitoring shoul be less than 5 minutes."
|
|
::= {zxAnAdslMibObjects 20}
|
|
|
|
|
|
zxAnAdslLineAlarmConfProfileExtEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslLineAlarmConfProfileExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry extends the adslLineAlarmConfProfileEntry defined in
|
|
[RFC2662]. Each entry corresponds to an ADSL line alarm profile."
|
|
|
|
AUGMENTS { adslLineAlarmConfProfileEntry }
|
|
::= {zxAnAdslLineAlarmConfProfileExtTable 1}
|
|
|
|
|
|
ZxAnAdslLineAlarmConfProfileExtEntry ::=
|
|
SEQUENCE {
|
|
zxAnAdslAtucConnRateTolerance INTEGER,
|
|
zxAnAdslAturConnRateTolerance INTEGER,
|
|
zxAnAdslAtucThreshConnRate Integer32,
|
|
zxAnAdslAturThreshConnRate Integer32,
|
|
zxAnAdslMaxAtucConnRateTolerance INTEGER,
|
|
zxAnAdslMaxAturConnRateTolerance INTEGER,
|
|
zxAnAdslMaxThreshAtucConnRate Integer32,
|
|
zxAnAdslMaxThreshAturConnRate Integer32,
|
|
zxAnAdslAturInitFailTrapEnable BITS,
|
|
zxAnAdslThreshAtucInpLeftr INTEGER,
|
|
zxAnAdslThreshAturInpLeftr INTEGER
|
|
}
|
|
|
|
|
|
zxAnAdslAtucConnRateTolerance OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
UNITS "%"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and
|
|
actual adslAtucChanCurrTxRate.
|
|
|
|
Calculation:
|
|
|
|
100*(adslAtucChanConfInterleaveMaxTxRate - adslAtucChanCurrTxRate)
|
|
Difference =-------------------------------------------------------------------
|
|
adslAtucChanConfInterleaveMaxTxRate
|
|
|
|
If Difference is larger than zxAnAdslAtucConnRateTolerance,
|
|
zxAnAdslAtucLowConnRateTrap trap will be sent.
|
|
|
|
A value of `0' will disable the trap. "
|
|
|
|
DEFVAL { 0 }
|
|
::= { zxAnAdslLineAlarmConfProfileExtEntry 1 }
|
|
|
|
|
|
|
|
zxAnAdslAturConnRateTolerance OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
UNITS "%"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Tolerance between configured adslAturChanConfInterleaveMaxTxRate and
|
|
actual adslAturChanCurrTxRate.
|
|
|
|
Calculation:
|
|
|
|
100*(adslAturChanConfInterleaveMaxTxRate - adslAturChanCurrTxRate)
|
|
Difference =-------------------------------------------------------------------
|
|
adslAturChanConfInterleaveMaxTxRate
|
|
|
|
|
|
If Difference is larger than zxAnAdslAturConnRateTolerance,
|
|
zxAnAdslAturLowConnRateTrap trap will be sent.
|
|
|
|
A value of `0' will disable the trap. "
|
|
|
|
DEFVAL { 0 }
|
|
::= { zxAnAdslLineAlarmConfProfileExtEntry 2 }
|
|
|
|
|
|
|
|
zxAnAdslAtucThreshConnRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Threshold of Atuc connection rate.
|
|
If adslAtucChanCurrTxRate is lower than zxAnAdslAtucThreshConnRate,
|
|
zxAnAdslAtucLowConnRateTrap trap will be sent.
|
|
A value of `0' will disable the trap. "
|
|
|
|
DEFVAL { 0 }
|
|
::= { zxAnAdslLineAlarmConfProfileExtEntry 3 }
|
|
|
|
|
|
|
|
zxAnAdslAturThreshConnRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Threshold of Atur connection rate.
|
|
If adslAturChanCurrTxRate is lower than zxAnAdslAturThreshConnRate,
|
|
zxAnAdslAturLowConnRateTrap trap will be sent.
|
|
A value of `0' will disable the trap. "
|
|
|
|
DEFVAL { 0 }
|
|
::= { zxAnAdslLineAlarmConfProfileExtEntry 4 }
|
|
|
|
|
|
|
|
zxAnAdslMaxAtucConnRateTolerance OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
UNITS "%"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and
|
|
actual adslAtucChanCurrTxRate.
|
|
|
|
Calculation:
|
|
|
|
100*(adslAtucChanCurrTxRate - adslAtucChanConfInterleaveMaxTxRate)
|
|
Difference =-------------------------------------------------------------------
|
|
adslAtucChanConfInterleaveMaxTxRate
|
|
|
|
If Difference is larger than zxAnMaxAdslAtucConnRateTolerance,
|
|
zxAnAdslAtucHighConnRateTrap trap will be sent.
|
|
|
|
A value of `0' will disable the trap. "
|
|
|
|
DEFVAL { 0 }
|
|
::= { zxAnAdslLineAlarmConfProfileExtEntry 5 }
|
|
|
|
|
|
|
|
zxAnAdslMaxAturConnRateTolerance OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
UNITS "%"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Tolerance between configured adslAturChanConfInterleaveMaxTxRate and
|
|
actual adslAturChanCurrTxRate.
|
|
|
|
Calculation:
|
|
|
|
100*(adslAturChanCurrTxRate - adslAturChanConfInterleaveMaxTxRate)
|
|
Difference =-------------------------------------------------------------------
|
|
adslAturChanConfInterleaveMaxTxRate
|
|
|
|
|
|
If Difference is larger than zxAnAdslMaxAturConnRateTolerance,
|
|
zxAnAdslAturHighConnRateTrap trap will be sent.
|
|
|
|
A value of `0' will disable the trap. "
|
|
|
|
DEFVAL { 0 }
|
|
::= { zxAnAdslLineAlarmConfProfileExtEntry 6 }
|
|
|
|
|
|
|
|
zxAnAdslMaxThreshAtucConnRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Threshold of Atuc connection rate.
|
|
If adslAtucChanCurrTxRate is higher than zxAnAdslMaxThreshAtucConnRate,
|
|
zxAnAdslAtucHighConnRateTrap trap will be sent.
|
|
A value of `0' will disable the trap. "
|
|
|
|
DEFVAL { 0 }
|
|
::= { zxAnAdslLineAlarmConfProfileExtEntry 7 }
|
|
|
|
|
|
|
|
zxAnAdslMaxThreshAturConnRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Threshold of Atur connection rate.
|
|
If adslAturChanCurrTxRate is higher than zxAnAdslMaxThreshAturConnRate,
|
|
zxAnAdslAturHighConnRateTrap trap will be sent.
|
|
A value of `0' will disable the trap. "
|
|
|
|
DEFVAL { 0 }
|
|
::= { zxAnAdslLineAlarmConfProfileExtEntry 8 }
|
|
|
|
zxAnAdslAturInitFailTrapEnable OBJECT-TYPE
|
|
SYNTAX BITS{
|
|
unused1 (0),
|
|
lossOfFraming (1),
|
|
lossOfSignal (2),
|
|
lossOfPower (3),
|
|
unused2 (4),
|
|
lossOfSignalQuality (5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables and disables the InitFailureTrap on the atur interface.
|
|
|
|
unused1 (0) - This bit is no use to enable or
|
|
disable the the InitFailureTrap
|
|
on the atur interface.
|
|
|
|
lossOfFraming (1) - Value 0 means disable the loss of
|
|
frame trap on the atur interface.
|
|
|
|
lossOfSignal (2) - Value 0 means disable the loss of
|
|
signal trap on the atur interface.
|
|
|
|
lossOfPower (3) - Value 0 means disable the loss of
|
|
power trap on the atur interface.
|
|
|
|
unused2 (4) - This bit is no use to enable or
|
|
disable the InitFailureTrap on the
|
|
atur interface.
|
|
|
|
lossOfSignalQuality (5) - Value 0 means disable the loss of
|
|
signal quality trap on the atur
|
|
interface.
|
|
"
|
|
::= { zxAnAdslLineAlarmConfProfileExtEntry 9 }
|
|
|
|
zxAnAdslThreshAtucInpLeftr OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters of downstream.
|
|
The fraction of NDR that shall be used as the threshold for
|
|
leftr defects.
|
|
lefter (The low error-free throughput rate) defect is defined as:
|
|
A leftr defect occuurs when EFTR < EFTR_THRESH * NDR
|
|
A leftr defect terminates when EFTR >= EFTR_THRESH * NDR
|
|
When EFTR_THRESH is set to the special value of 0, ETR shall be
|
|
used as the threshold in above inequalities:
|
|
A leftr defect occurs when EFTR < ETR
|
|
A leftr defect terminates when EFTR >=ETR.
|
|
Valid values are from 0 to 100 in increments of 0.01.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { zxAnAdslLineAlarmConfProfileExtEntry 10 }
|
|
|
|
zxAnAdslThreshAturInpLeftr OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters of upstream.
|
|
The fraction of NDR that shall be used as the threshold for
|
|
leftr defects.
|
|
lefter (The low error-free throughput rate) defect is defined as:
|
|
A leftr defect occuurs when EFTR < EFTR_THRESH * NDR
|
|
A leftr defect terminates when EFTR >= EFTR_THRESH * NDR
|
|
When EFTR_THRESH is set to the special value of 0, ETR shall be
|
|
used as the threshold in above inequalities:
|
|
A leftr defect occurs when EFTR < ETR
|
|
A leftr defect terminates when EFTR >=ETR.
|
|
Valid values are from 0 to 100 in increments of 0.01.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { zxAnAdslLineAlarmConfProfileExtEntry 11 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Atuc Performance Data Table
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnAdslAtucPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslAtucPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides atuc performance."
|
|
::= {zxAnAdslMibObjects 21}
|
|
|
|
zxAnAdslAtucPerfDataEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslAtucPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the entry for atuc channel performance."
|
|
INDEX { ifIndex }
|
|
::= {zxAnAdslAtucPerfDataTable 1}
|
|
|
|
ZxAnAdslAtucPerfDataEntry ::=
|
|
SEQUENCE {
|
|
zxAnAdslAtucPerfDataFecs Counter32,
|
|
zxAnAdslAtucPerfDataCurr15Fecs Counter32,
|
|
zxAnAdslAtucPerfDataCurr1DayFecs Counter32,
|
|
zxAnAdslAtucPerfDataPrev1DayFecs Counter32
|
|
}
|
|
|
|
zxAnAdslAtucPerfDataFecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there was at
|
|
least one FEC correction event on this channel."
|
|
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
|
|
::= { zxAnAdslAtucPerfDataEntry 1 }
|
|
|
|
zxAnAdslAtucPerfDataCurr15Fecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there was at
|
|
least one FEC correction event on this channel
|
|
in this line within the current 15 minute time interval."
|
|
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
|
|
::= { zxAnAdslAtucPerfDataEntry 2 }
|
|
|
|
zxAnAdslAtucPerfDataCurr1DayFecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there was at
|
|
least one FEC correction event on this channel
|
|
in this line within the current 1 day interval."
|
|
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
|
|
::= { zxAnAdslAtucPerfDataEntry 3 }
|
|
|
|
zxAnAdslAtucPerfDataPrev1DayFecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there was at
|
|
least one FEC correction event on this channel
|
|
in this line within the most recent previous 1-day period."
|
|
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
|
|
::= { zxAnAdslAtucPerfDataEntry 4 }
|
|
--------------------------------------------------------------------------------
|
|
-- Atur Performance Data Table
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnAdslAturPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslAturPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides atur performance."
|
|
::= {zxAnAdslMibObjects 22}
|
|
|
|
zxAnAdslAturPerfDataEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslAturPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the entry for atur performance."
|
|
INDEX { ifIndex }
|
|
::= {zxAnAdslAturPerfDataTable 1}
|
|
|
|
ZxAnAdslAturPerfDataEntry ::=
|
|
SEQUENCE {
|
|
zxAnAdslAturPerfDataFecs Counter32,
|
|
zxAnAdslAturPerfDataCurr15Fecs Counter32,
|
|
zxAnAdslAturPerfDataCurr1DayFecs Counter32,
|
|
zxAnAdslAturPerfDataPrev1DayFecs Counter32
|
|
}
|
|
|
|
zxAnAdslAturPerfDataFecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there was at
|
|
least one FEC correction event on this channel."
|
|
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
|
|
::= { zxAnAdslAturPerfDataEntry 1 }
|
|
|
|
zxAnAdslAturPerfDataCurr15Fecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there was at
|
|
least one FEC correction event on this channel
|
|
in this line within the current 15 minute time interval."
|
|
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
|
|
::= { zxAnAdslAturPerfDataEntry 2 }
|
|
|
|
zxAnAdslAturPerfDataCurr1DayFecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there was at
|
|
least one FEC correction event on this channel
|
|
in this line within the current 1 day interval."
|
|
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
|
|
::= { zxAnAdslAturPerfDataEntry 3 }
|
|
|
|
zxAnAdslAturPerfDataPrev1DayFecs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there was at
|
|
least one FEC correction event on this channel
|
|
in this line within the most recent previous 1-day period."
|
|
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
|
|
::= { zxAnAdslAturPerfDataEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Atuc Channel Performance Data Table
|
|
--------------------------------------------------------------------------------
|
|
zxAnAdslAtucChanPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslAtucChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides atuc channel performance."
|
|
::= {zxAnAdslMibObjects 23}
|
|
|
|
zxAnAdslAtucChanPerfDataEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslAtucChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the entry for atuc channel performance."
|
|
INDEX { ifIndex }
|
|
::= {zxAnAdslAtucChanPerfDataTable 1}
|
|
|
|
ZxAnAdslAtucChanPerfDataEntry ::=
|
|
SEQUENCE {
|
|
zxAnAtucChanPerfCurr15RtxDtu Counter32,
|
|
zxAnAtucChanPerfCurr15RtxCDtu Counter32,
|
|
zxAnAtucChanPerfCurr15RtxUcDtu Counter32,
|
|
zxAnAtucChanPerfCurr1DRtxDtu Counter32,
|
|
zxAnAtucChanPerfCurr1DRtxCDtu Counter32,
|
|
zxAnAtucChanPerfCurr1DRtxUcDtu Counter32
|
|
}
|
|
|
|
zxAnAtucChanPerfCurr15RtxDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
retransmitted by the transmitter in the current 15 minute
|
|
interval. Multiple retransmission of the same DTU is counted
|
|
as many times as it has been retransmitted.
|
|
"
|
|
::= { zxAnAdslAtucChanPerfDataEntry 1 }
|
|
|
|
zxAnAtucChanPerfCurr15RtxCDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
detected in error and has been successfully corrected by a
|
|
retransmission in the current 15 minute interval"
|
|
::= { zxAnAdslAtucChanPerfDataEntry 2 }
|
|
|
|
zxAnAtucChanPerfCurr15RtxUcDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU is detected
|
|
in error and has not been corrected by a retransmission in the
|
|
current 15 minute interval."
|
|
::= { zxAnAdslAtucChanPerfDataEntry 3 }
|
|
|
|
zxAnAtucChanPerfCurr1DRtxDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
retransmitted by the transmitter in the current day interval.
|
|
Multiple retransmission of the same DTU is counted as many times
|
|
as it has been retransmitted.
|
|
"
|
|
::= { zxAnAdslAtucChanPerfDataEntry 4 }
|
|
|
|
zxAnAtucChanPerfCurr1DRtxCDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
detected in error and has been successfully corrected by a
|
|
retransmission in the current day interval"
|
|
::= { zxAnAdslAtucChanPerfDataEntry 5 }
|
|
|
|
zxAnAtucChanPerfCurr1DRtxUcDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU is detected
|
|
in error and has not been corrected by a retransmission."
|
|
::= { zxAnAdslAtucChanPerfDataEntry 6 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Atur Channel Performance Data Table
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnAdslAturChanPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslAturChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides atur channel performance."
|
|
::= {zxAnAdslMibObjects 24}
|
|
|
|
zxAnAdslAturChanPerfDataEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslAturChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the entry for atur channel performance."
|
|
INDEX { ifIndex }
|
|
::= {zxAnAdslAturChanPerfDataTable 1}
|
|
|
|
ZxAnAdslAturChanPerfDataEntry ::=
|
|
SEQUENCE {
|
|
zxAnAturChanPerfCurr15RtxDtu Counter32,
|
|
zxAnAturChanPerfCurr15RtxCDtu Counter32,
|
|
zxAnAturChanPerfCurr15RtxUcDtu Counter32,
|
|
zxAnAturChanPerfCurr1DRtxDtu Counter32,
|
|
zxAnAturChanPerfCurr1DRtxCDtu Counter32,
|
|
zxAnAturChanPerfCurr1DRtxUcDtu Counter32
|
|
}
|
|
|
|
zxAnAturChanPerfCurr15RtxDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
retransmitted by the transmitter in the current 15 minute
|
|
interval. Multiple retransmission of the same DTU is counted
|
|
as many times as it has been retransmitted.
|
|
"
|
|
::= { zxAnAdslAturChanPerfDataEntry 1 }
|
|
|
|
zxAnAturChanPerfCurr15RtxCDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
detected in error and has been successfully corrected by a
|
|
retransmission in the current 15 minute interval"
|
|
::= { zxAnAdslAturChanPerfDataEntry 2 }
|
|
|
|
zxAnAturChanPerfCurr15RtxUcDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU is detected
|
|
in error and has not been corrected by a retransmission in the
|
|
current 15 minute interval."
|
|
::= { zxAnAdslAturChanPerfDataEntry 3 }
|
|
|
|
zxAnAturChanPerfCurr1DRtxDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
retransmitted by the transmitter in the current day interval.
|
|
Multiple retransmission of the same DTU is counted as many times
|
|
as it has been retransmitted.
|
|
"
|
|
::= { zxAnAdslAturChanPerfDataEntry 4 }
|
|
|
|
zxAnAturChanPerfCurr1DRtxCDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
detected in error and has been successfully corrected by a
|
|
retransmission in the current day interval"
|
|
::= { zxAnAdslAturChanPerfDataEntry 5 }
|
|
|
|
zxAnAturChanPerfCurr1DRtxUcDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU is detected
|
|
in error and has not been corrected by a retransmission."
|
|
::= { zxAnAdslAturChanPerfDataEntry 6 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Atuc Channel Interval Performance Table
|
|
------------------------------------------------------------------------------
|
|
|
|
zxAnAdslAtucChanIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslAtucChanIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table zxAnAdslAtucChanIntervalTable contains history
|
|
Performance Monitoring results for 15min of DSL channel. "
|
|
::= { zxAnAdslMibObjects 25 }
|
|
|
|
zxAnAdslAtucChanIntervalEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslAtucChanIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table zxAnAdslAtucChanIntervalTable contains history
|
|
Performance Monitoring results for 15min of DSL channel.
|
|
"
|
|
AUGMENTS { adslAtucChanIntervalEntry }
|
|
::= { zxAnAdslAtucChanIntervalTable 1 }
|
|
|
|
ZxAnAdslAtucChanIntervalEntry ::=
|
|
SEQUENCE {
|
|
zxAnAdslAtucChanIntervalRtxDtu Counter32,
|
|
zxAnAdslAtucChanIntervalRtxCDtu Counter32,
|
|
zxAnAdslAtucChanIntervalRtxUcDtu Counter32
|
|
}
|
|
|
|
zxAnAdslAtucChanIntervalRtxDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
retransmitted by the transmitter during this interval. Multiple
|
|
retransmission of the same DTU is counted as many times as it
|
|
has been retransmitted.
|
|
"
|
|
::= { zxAnAdslAtucChanIntervalEntry 1 }
|
|
|
|
zxAnAdslAtucChanIntervalRtxCDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
detected in error and has been successfully corrected by a
|
|
retransmission during this interval."
|
|
::= { zxAnAdslAtucChanIntervalEntry 2 }
|
|
|
|
zxAnAdslAtucChanIntervalRtxUcDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU is detected
|
|
in error and has not been corrected by a retransmission. during
|
|
this interval."
|
|
::= { zxAnAdslAtucChanIntervalEntry 3 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Atur Channel Interval Performance Table
|
|
------------------------------------------------------------------------------
|
|
zxAnAdslAturChanIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslAturChanIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table zxAnAdslAturChanIntervalTable contains history
|
|
Performance Monitoring results for 15min of DSL channel. "
|
|
::= { zxAnAdslMibObjects 26 }
|
|
|
|
zxAnAdslAturChanIntervalEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslAturChanIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table zxAnAdslAturChanIntervalTable contains history
|
|
Performance Monitoring results for 15min of DSL channel.
|
|
"
|
|
AUGMENTS { adslAturChanIntervalEntry }
|
|
::= { zxAnAdslAturChanIntervalTable 1 }
|
|
|
|
ZxAnAdslAturChanIntervalEntry ::=
|
|
SEQUENCE {
|
|
zxAnAdslAturChanIntervalRtxDtu Counter32,
|
|
zxAnAdslAturChanIntervalRtxCDtu Counter32,
|
|
zxAnAdslAturChanIntervalRtxUcDtu Counter32
|
|
}
|
|
|
|
zxAnAdslAturChanIntervalRtxDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
retransmitted by the transmitter during this interval. Multiple
|
|
retransmission of the same DTU is counted as many times as it
|
|
has been retransmitted.
|
|
"
|
|
::= { zxAnAdslAturChanIntervalEntry 1 }
|
|
|
|
zxAnAdslAturChanIntervalRtxCDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
detected in error and has been successfully corrected by a
|
|
retransmission during this interval."
|
|
::= { zxAnAdslAturChanIntervalEntry 2 }
|
|
|
|
zxAnAdslAturChanIntervalRtxUcDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU is detected
|
|
in error and has not been corrected by a retransmission. during
|
|
this interval."
|
|
::= { zxAnAdslAturChanIntervalEntry 3 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Atuc Channel history 1 Day Performance Table
|
|
------------------------------------------------------------------------------
|
|
|
|
zxAnAdslAtucChanHist1DayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslAtucChanHist1DayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table zxAnAdslAtucChanHist1DayTable contains channel history
|
|
for 1 day intervals of DSL. "
|
|
::= { zxAnAdslMibObjects 27 }
|
|
|
|
zxAnAdslAtucChanHist1DayEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslAtucChanHist1DayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table zxAnAdslAtucChanHist1DayTable contains PM channel
|
|
history for 1 day intervals of DSL.
|
|
The indexes of this table is an interface index where
|
|
the interface has an ifType value which is applicable
|
|
for a DSL channel, the termination unit and the
|
|
interval number."
|
|
INDEX { ifIndex,zxAnAdslAtucChanHist1DayNumber }
|
|
::= { zxAnAdslAtucChanHist1DayTable 1 }
|
|
|
|
ZxAnAdslAtucChanHist1DayEntry ::= SEQUENCE {
|
|
zxAnAdslAtucChanHist1DayNumber INTEGER,
|
|
zxAnAdslAtucChanHist1DayRtxDtu Counter32,
|
|
zxAnAdslAtucChanHist1DayRtxCDtu Counter32,
|
|
zxAnAdslAtucChanHist1DayRtxUcDtu Counter32
|
|
}
|
|
|
|
zxAnAdslAtucChanHist1DayNumber OBJECT-TYPE
|
|
SYNTAX INTEGER(1..30)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval number."
|
|
::= { zxAnAdslAtucChanHist1DayEntry 1 }
|
|
|
|
zxAnAdslAtucChanHist1DayRtxDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
retransmitted by the transmitter during this interval. Multiple
|
|
retransmission of the same DTU is counted as many times as it
|
|
has been retransmitted."
|
|
::= { zxAnAdslAtucChanHist1DayEntry 2 }
|
|
|
|
zxAnAdslAtucChanHist1DayRtxCDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
detected in error and has been successfully corrected by a
|
|
retransmission during this interval."
|
|
::= { zxAnAdslAtucChanHist1DayEntry 3 }
|
|
|
|
zxAnAdslAtucChanHist1DayRtxUcDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU is detected
|
|
in error and has not been corrected by a retransmission during
|
|
this interval."
|
|
::= { zxAnAdslAtucChanHist1DayEntry 4 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Atur Channel history 1 Day Performance Table
|
|
------------------------------------------------------------------------------
|
|
zxAnAdslAturChanHist1DayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnAdslAturChanHist1DayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table zxAnAdslAturChanHist1DayTable contains channel history
|
|
for 1 day intervals of DSL. "
|
|
::= { zxAnAdslMibObjects 28 }
|
|
|
|
zxAnAdslAturChanHist1DayEntry OBJECT-TYPE
|
|
SYNTAX ZxAnAdslAturChanHist1DayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table zxAnAdslAturChanHist1DayTable contains PM channel
|
|
history for 1 day intervals of DSL.
|
|
The indexes of this table is an interface index where
|
|
the interface has an ifType value which is applicable
|
|
for a DSL channel, the termination unit and the
|
|
interval number."
|
|
INDEX { ifIndex,zxAnAdslAturChanHist1DayNumber }
|
|
::= { zxAnAdslAturChanHist1DayTable 1 }
|
|
|
|
ZxAnAdslAturChanHist1DayEntry ::= SEQUENCE {
|
|
zxAnAdslAturChanHist1DayNumber INTEGER,
|
|
zxAnAdslAturChanHist1DayRtxDtu Counter32,
|
|
zxAnAdslAturChanHist1DayRtxCDtu Counter32,
|
|
zxAnAdslAturChanHist1DayRtxUcDtu Counter32
|
|
}
|
|
|
|
zxAnAdslAturChanHist1DayNumber OBJECT-TYPE
|
|
SYNTAX INTEGER(1..30)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval number."
|
|
::= { zxAnAdslAturChanHist1DayEntry 1 }
|
|
|
|
zxAnAdslAturChanHist1DayRtxDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
retransmitted by the transmitter during this interval. Multiple
|
|
retransmission of the same DTU is counted as many times as it
|
|
has been retransmitted."
|
|
::= { zxAnAdslAturChanHist1DayEntry 2 }
|
|
|
|
zxAnAdslAturChanHist1DayRtxCDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU has been
|
|
detected in error and has been successfully corrected by a
|
|
retransmission during this interval."
|
|
::= { zxAnAdslAturChanHist1DayEntry 3 }
|
|
|
|
zxAnAdslAturChanHist1DayRtxUcDtu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GINP configuration parameters.
|
|
this is a counter that is incremented each time a DTU is detected
|
|
in error and has not been corrected by a retransmission during
|
|
this interval."
|
|
::= { zxAnAdslAturChanHist1DayEntry 4 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Dsl Loopback Test Table
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnDslLoopBackTestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnDslLoopBackTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each DSL line loopback test."
|
|
::= {zxAnAdslMibObjects 30}
|
|
|
|
|
|
zxAnDslLoopBackTestEntry OBJECT-TYPE
|
|
SYNTAX ZxAnDslLoopBackTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSL line loopback test information entry"
|
|
INDEX { zxAnDslLoopBackTestRack,zxAnDslLoopBackTestShelf,
|
|
zxAnDslLoopBackTestSlot,zxAnDslLoopBackTestPort,
|
|
zxAnDslLoopBackTestBridgePort }
|
|
::= {zxAnDslLoopBackTestTable 1}
|
|
|
|
|
|
ZxAnDslLoopBackTestEntry ::=
|
|
SEQUENCE {
|
|
zxAnDslLoopBackTestRack Integer32,
|
|
zxAnDslLoopBackTestShelf Integer32,
|
|
zxAnDslLoopBackTestSlot Integer32,
|
|
zxAnDslLoopBackTestPort Integer32,
|
|
zxAnDslLoopBackTestBridgePort Integer32,
|
|
zxAnDslLoopBackTestType INTEGER,
|
|
zxAnDslLoopBackTestOperStatus INTEGER,
|
|
zxAnDslLoopBackTestResult INTEGER,
|
|
zxAnDslLoopBackTestConfSendCells Integer32,
|
|
zxAnDslLoopBackTestResultRecivedCells Integer32,
|
|
zxAnDslLoopBackTestRowStatus RowStatus
|
|
}
|
|
|
|
zxAnDslLoopBackTestRack OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rack number of the dsl port."
|
|
::= { zxAnDslLoopBackTestEntry 1 }
|
|
|
|
|
|
|
|
zxAnDslLoopBackTestShelf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shelf number of the dsl port."
|
|
::= { zxAnDslLoopBackTestEntry 2 }
|
|
|
|
|
|
zxAnDslLoopBackTestSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Slot number of the dsl port."
|
|
::= { zxAnDslLoopBackTestEntry 3 }
|
|
|
|
|
|
zxAnDslLoopBackTestPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dsl port number."
|
|
::= { zxAnDslLoopBackTestEntry 4 }
|
|
|
|
|
|
|
|
zxAnDslLoopBackTestBridgePort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dsl bridge port index. eg.It is PVC ID in ADSL port.
|
|
If the test is only in the physical port,then this fileds will be 0"
|
|
::= { zxAnDslLoopBackTestEntry 5 }
|
|
|
|
|
|
zxAnDslLoopBackTestType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noOper(0), -- No operation
|
|
cancle(1), -- Cancle this test
|
|
utopia(2), -- Utopia loopback test
|
|
afe(3), -- AFE loopback test
|
|
hybrid(4), -- Hybrid loopback test
|
|
xTUC_OAM(5),-- ATUC data path loopback test,such as ATM OAM loopback.
|
|
xTUR_OAM(6), -- ATUR data path loopback test,such as ATM OAM loopback.
|
|
xTUR_CC(7), -- ATUR ATM continuity cell test.
|
|
digital(8) -- ATUC DSP module loopback test.
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is loop test action expected.
|
|
|
|
NOTES:
|
|
|
|
"
|
|
::= { zxAnDslLoopBackTestEntry 6 }
|
|
|
|
|
|
zxAnDslLoopBackTestOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
neverExcute(0), -- Never excute test
|
|
excuting(1), -- Excuting test now
|
|
excuted(2), -- Test has been excuted
|
|
faliedToCommit(3) -- Falied to commit test command to DSL card.
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is loop test operational status.
|
|
|
|
Note: if zxAnDslLoopBackTestOperStatus equal to Excuting(1),
|
|
ifOperStaus should be loopback test(3). "
|
|
::= { zxAnDslLoopBackTestEntry 7 }
|
|
|
|
|
|
zxAnDslLoopBackTestResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noResult(0),
|
|
success(1),
|
|
generalFailed(2), -- Test failed but no detailed reason.
|
|
noSupport(3), -- Current DSL card doesn't support this test.
|
|
unkown(4), -- Unkown the test result.
|
|
noSuchPort(5), -- No this port on dsl card
|
|
loopBackFailed(6),-- Loop back failed on dsl card
|
|
portNotActive(7), -- Some test can't be excuted when port is not actived.
|
|
portInTesting(8), -- Port in testing and can't excute the new test
|
|
portInService(9), -- Port in service and can't excute the test
|
|
portFailures(10), -- Port has failures and can't excute the test
|
|
cardFailures(11), -- Dsl card has failures and can't excute the test
|
|
noPvcFound(12), -- No PVC found on the test port
|
|
unknownTestType(13) -- The test type is not UTOPIA,AFE,HYBRID,ATUC-OAM or ATUR-OAM
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is loop test result and includes reasons for test failures."
|
|
::= { zxAnDslLoopBackTestEntry 8 }
|
|
|
|
|
|
zxAnDslLoopBackTestConfSendCells OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of cells will be sent in the loopback test."
|
|
|
|
::= { zxAnDslLoopBackTestEntry 9 }
|
|
|
|
|
|
zxAnDslLoopBackTestResultRecivedCells OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of recived cells in the loopback test."
|
|
::= { zxAnDslLoopBackTestEntry 10 }
|
|
|
|
|
|
zxAnDslLoopBackTestRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loop test table RowStatus . "
|
|
::= { zxAnDslLoopBackTestEntry 15 }
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
-- trap definitions
|
|
------------------------------------------------------------------------------
|
|
|
|
zxAnAdslTraps OBJECT IDENTIFIER ::= { zxAnAdslMib 2 }
|
|
|
|
zxAnAdslAtuxConnRateOverThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucChanConfInterleaveMaxTxRate,
|
|
adslAtucChanCurrTxRate }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"zxAnAdslAtucConnRateTolerance threshold or zxAnAdslAtucThreshConnRate reached."
|
|
::= { zxAnAdslTraps 1 }
|
|
|
|
|
|
zxAnAdslAtuxConnRateUnderThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucChanConfInterleaveMaxTxRate,
|
|
adslAtucChanCurrTxRate }
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AtucConnRate Difference is below threshold of zxAnAdslAtucConnRateTolerance.
|
|
Or adslAtucChanCurrTxRate is below threshold of zxAnAdslAtucThreshConnRate. "
|
|
::= { zxAnAdslTraps 2 }
|
|
|
|
|
|
zxAnAdslAtucHighConnRateTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucChanConfInterleaveMaxTxRate, adslAtucChanCurrTxRate,
|
|
zxAnAdslMaxThreshAtucConnRate, zxAnAdslMaxAtucConnRateTolerance}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"zxAnAdslMaxAtucConnRateTolerance threshold or zxAnAdslMaxThreshAtucConnRate reached."
|
|
::= { zxAnAdslTraps 3 }
|
|
|
|
|
|
zxAnAdslAtucHighConnRateClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucChanConfInterleaveMaxTxRate, adslAtucChanCurrTxRate,
|
|
zxAnAdslMaxThreshAtucConnRate, zxAnAdslMaxAtucConnRateTolerance}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"zxAnAdslAtucHighConnRateTrap clear."
|
|
::= { zxAnAdslTraps 4 }
|
|
|
|
|
|
zxAnAdslAtucLowConnRateTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucChanConfInterleaveMaxTxRate, adslAtucChanCurrTxRate,
|
|
zxAnAdslAtucThreshConnRate, zxAnAdslAtucConnRateTolerance}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"zxAnAdslAtucConnRateTolerance threshold or zxAnAdslAtucThreshConnRate reached."
|
|
::= { zxAnAdslTraps 5 }
|
|
|
|
|
|
zxAnAdslAtucLowConnRateClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAtucChanConfInterleaveMaxTxRate, adslAtucChanCurrTxRate,
|
|
zxAnAdslAtucThreshConnRate, zxAnAdslAtucConnRateTolerance}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" zxAnAdslAtucLowConnRateTrap clear."
|
|
::= { zxAnAdslTraps 6 }
|
|
|
|
|
|
zxAnAdslAturHighConnRateTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAturChanConfInterleaveMaxTxRate, adslAturChanCurrTxRate,
|
|
zxAnAdslMaxThreshAturConnRate, zxAnAdslMaxAturConnRateTolerance}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"zxAnAdslMaxAturConnRateTolerance threshold or zxAnAdslMaxThreshAturConnRate reached."
|
|
::= { zxAnAdslTraps 7 }
|
|
|
|
|
|
zxAnAdslAturHighConnRateClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAturChanConfInterleaveMaxTxRate, adslAturChanCurrTxRate,
|
|
zxAnAdslMaxThreshAturConnRate, zxAnAdslMaxAturConnRateTolerance}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"zxAnAdslAturHighConnRateTrap clear."
|
|
::= { zxAnAdslTraps 8 }
|
|
|
|
|
|
zxAnAdslAturLowConnRateTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAturChanConfInterleaveMaxTxRate, adslAturChanCurrTxRate,
|
|
zxAnAdslAturThreshConnRate, zxAnAdslAturConnRateTolerance}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"zxAnAdslAturConnRateTolerance threshold or zxAnAdslAturThreshConnRate reached."
|
|
::= { zxAnAdslTraps 9 }
|
|
|
|
|
|
zxAnAdslAturLowConnRateClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { adslAturChanConfInterleaveMaxTxRate, adslAturChanCurrTxRate,
|
|
zxAnAdslAturThreshConnRate, zxAnAdslAturConnRateTolerance}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" zxAnAdslAturLowConnRateTrap clear."
|
|
::= { zxAnAdslTraps 10 }
|
|
|
|
END |