-------------------------------------------------------------------------- -- File Name : ZTE-AN-EVENT-MIB.mib -- Date : 2007-01-25 -- Author : ZTE Nms dept. -- -- Zte Adsl Mib for Access Node -- -- -------------------------------------------------------------------------- ZTE-AN-ADSL-LINE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, TimeTicks,Counter32, Gauge32,Unsigned32, NOTIFICATION-TYPE ,Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB ifIndex FROM IF-MIB adslLineConfProfileName, adslLineConfProfileEntry,adslLineAlarmConfProfileEntry, adslAtucChanConfInterleaveMaxTxRate,adslAtucChanCurrTxRate, adslAturChanConfInterleaveMaxTxRate,adslAturChanCurrTxRate, adslAtucChanIntervalEntry,adslAturChanIntervalEntry FROM ADSL-LINE-MIB RowStatus FROM SNMPv2-TC zxAn FROM ZTE-AN-TC-MIB; -- ZTE Dsl line ext MIB objects zxAnAdslMib MODULE-IDENTITY LAST-UPDATED "200701251300Z" ORGANIZATION "zte dsl product line" CONTACT-INFO " su chunshan Mail: suchunshan@zte.com.cn Tel : 021-68896292,68896251" DESCRIPTION "This mib defines extended dsl line mo (managed object ) for adsl2, adsl+ and dsl loop test. Naming Conventions: Atuc -- (ATUC) modem at near (Central) end of line Atur -- (ATUR) modem at Remote end of line " ::= {zxAn 1000} zxAnAdslMibObjects OBJECT IDENTIFIER ::= { zxAnAdslMib 1 } -------------------------------------------------------------------------------- -- Following objects are defined. -- Adsl Line Extended Table -- Adsl Line Config Profile Extended Table -- Atuc Channel Table -- Atur Channel Table -- Adsl Line Alarm Profile Extended Table -- Atuc Performance Data Table -- Atur Performance Data Table -- Atuc Channel Performance Data Table -- Atur Channel Performance Data Table -- Atuc Channel Interval Performance Table -- Atur Channel Interval Performance Table -- Atuc Channel history 1 Day Performance Table -- Atur Channel history 1 Day Performance Table -- Dsl Loopback Test Table -- trap definitions -------------------------------------------------------------------------------- ------------------------------------------------------------------------------ -- Adsl Line Extended Table ------------------------------------------------------------------------------ zxAnAdslLineTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Adsl line additional information table." ::= {zxAnAdslMibObjects 1} zxAnAdslLineEntry OBJECT-TYPE SYNTAX ZxAnAdslLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Adsl line additional information entry" INDEX { ifIndex } ::= {zxAnAdslLineTable 1} ZxAnAdslLineEntry ::= SEQUENCE { zxAnAdslLineTxDataRate Gauge32, zxAnAdslLineRxDataRate Gauge32, zxAnAdslAtucActInp Integer32, zxAnAdslAturActInp Integer32, zxAnAdslLineExtConfPrf SnmpAdminString } zxAnAdslLineTxDataRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Transmitted net data rate on this line." ::= { zxAnAdslLineEntry 1 } zxAnAdslLineRxDataRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Recieved net data rate on this line." ::= { zxAnAdslLineEntry 2 } zxAnAdslAtucActInp OBJECT-TYPE SYNTAX Integer32(0..255) UNITS "0.1 symbols" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual impulse noise protection. This parameter reports the actual impulse noise protection (INP) on the channel in the L0 state. In the L1 or L2 state, the parameter contains the INP in the previous L0 state. " ::= { zxAnAdslLineEntry 3 } zxAnAdslAturActInp OBJECT-TYPE SYNTAX Integer32(0..255) UNITS "0.1 symbols" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual impulse noise protection. This parameter reports the actual impulse noise protection (INP) on the channel in the L0 state. In the L1 or L2 state, the parameter contains the INP in the previous L0 state. " ::= { zxAnAdslLineEntry 4 } zxAnAdslLineExtConfPrf OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the XDSL2 Line Ext Profile Table, (zxAnXdsl2LnExtConfPrfTable), which applies for this line." ::= { zxAnAdslLineEntry 5 } ------------------------------------------------------------------------------ -- Adsl Line Config Profile Extended Table ------------------------------------------------------------------------------ zxAnAdslLineConfProfileExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslLineConfProfileExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Adsl line config profile extended information table." ::= {zxAnAdslMibObjects 2} zxAnAdslLineConfProfileExtEntry OBJECT-TYPE SYNTAX ZxAnAdslLineConfProfileExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry extends the adslLineConfProfileEntry defined in [RFC2662]. Each entry corresponds to an ADSL line profile." AUGMENTS { adslLineConfProfileEntry } ::= {zxAnAdslLineConfProfileExtTable 1} ZxAnAdslLineConfProfileExtEntry ::= SEQUENCE { zxAnAdslLineConfTxStartBin Integer32, zxAnAdslLineConfTxEndBin INTEGER, zxAnAdslLineConfRxStartBin Integer32, zxAnAdslLineConfRxEndBin INTEGER, zxAnAdslLineConfUseCustomBins INTEGER, zxAnAdslAtucConfPsdMaskType Integer32, zxAnAdslLineConfPMMode BITS, zxAnAdslLineConfPML2Rate INTEGER, zxAnAdsl2ConfMinProtectionDs INTEGER, zxAnAdslLineConfMinProtectionUs INTEGER, zxAnAdslConfDMTConfTrellis INTEGER, zxAnAdslAtucConfMaxBitsPerBin INTEGER, zxAnAdslAtucConfBitSwapDs INTEGER, zxAnAdslAtucConfBitSwapUs INTEGER, zxAnAdslAtucConfReAdsl2Enable INTEGER, zxAnAdslAtucConfPmL0Time INTEGER, zxAnAdslAtucConfPmL2Time INTEGER, zxAnAdslAtucConfPmL2Atpr INTEGER, zxAdsl2ConfPsdMaskSelectUs INTEGER } zxAnAdslLineConfTxStartBin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies lowest bin number allowed for Tx signal. Different line coding type has different default value. 0x20 (default for Annex A only) 0x20 (default for ADSL2/ADSL2plus) 0x06 (default for Annex A if G.Span and/or G.Span Plus are also defined) 0x40 (default for Annex B) 0x06 (default for Annex C/C.x) 0x06 (default for G.Span) 0x06 (default for G.Span Plus)" ::= { zxAnAdslLineConfProfileExtEntry 1 } zxAnAdslLineConfTxEndBin OBJECT-TYPE SYNTAX INTEGER(0..512) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies highest bin number allowed for Tx signal. Default = 0x3ff (default for all Annexes and ADSL2/ADSL2plus)" ::= { zxAnAdslLineConfProfileExtEntry 2 } zxAnAdslLineConfRxStartBin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies lowest bin number allowed for Rx signal. Different line coding type has different default value. 0x06 (default for Annex A) 0x01 (default for Annex B) 0x06 (default for Annex C/C.x) 0x06 (default for G.Span/ADSL+) 0x06 (default for G.Span Plus) 0x06 (default for ADSL2/ADLS2plus) " ::= { zxAnAdslLineConfProfileExtEntry 3 } zxAnAdslLineConfRxEndBin OBJECT-TYPE SYNTAX INTEGER(0..512) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies highest bin number allowed for Rx signal. Default = 0x3f (default for all Annexes and ADSL2/ADLS2plus)" ::= { zxAnAdslLineConfProfileExtEntry 4 } zxAnAdslLineConfUseCustomBins OBJECT-TYPE SYNTAX INTEGER { enable(1), -- enable use custom Bins disable(2) -- disable use custom Bins } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable custom bin selection for upstream/downstream transmission. This parameter is used in conjunction with the adslAtucDMTConfFreqBins and adslAturDMTConfFreqBins[ADSL-DMT-LINE-MIB] parameter." DEFVAL { 2 } ::= { zxAnAdslLineConfProfileExtEntry 5 } zxAnAdslAtucConfPsdMaskType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " It is supported by G.Span. Dsl card team will provide files about it in details." ::= { zxAnAdslLineConfProfileExtEntry 6 } zxAnAdslLineConfPMMode OBJECT-TYPE SYNTAX BITS { idle (0), lowPower(1) } MAX-ACCESS read-create STATUS current DESCRIPTION " This configuration parameter defines the line states the ATU-C may autonomously transition to on this line. It is coded in a bit map representation (0 if not allowed, 1 if allowed) with following definition: Bit 0 L3 state (Idle state) Bit 1 L1/L2 state (Low power state)." REFERENCE "Section 7.3.1.1.4 ITU G.997.1(05/2003) " ::= { zxAnAdslLineConfProfileExtEntry 7 } zxAnAdslLineConfPML2Rate OBJECT-TYPE SYNTAX INTEGER (256..1024) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION " PM configuration parameter,related to the L2 low power state. This parameter specifies the minimum net data rate during the low power state (L2)." REFERENCE "Section 7.3.2.1.5 ITU G.997.1(05/2003) " ::= { zxAnAdslLineConfProfileExtEntry 8 } zxAnAdsl2ConfMinProtectionDs OBJECT-TYPE SYNTAX INTEGER { autoAdaption (0), noProtection (1), halfSymbol (2), singleSymbol (3), twoSymbols (4), fourSymbols (5), eightSymbols (6), sixteenSymbols (7) } UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol." REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" DEFVAL { halfSymbol } ::= { zxAnAdslLineConfProfileExtEntry 9 } zxAnAdslLineConfMinProtectionUs OBJECT-TYPE SYNTAX INTEGER { autoAdaption (0), noProtection (1), halfSymbol (2), singleSymbol (3), twoSymbols (4), fourSymbols (5), eightSymbols (6), sixteenSymbols (7) } UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION " Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" DEFVAL { halfSymbol } ::= { zxAnAdslLineConfProfileExtEntry 10 } zxAnAdslConfDMTConfTrellis OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Parameter that enable or disable trellis coding. Trellis coding should always be enabled for its clear performance advantage. Trellis coding is mandatory for ADSL/ADSL2plus. The value enable(1) is default for all Annexes and ADSL2/ADSL2plus." DEFVAL { enable } ::= { zxAnAdslLineConfProfileExtEntry 11 } zxAnAdslAtucConfMaxBitsPerBin OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies maximum Rx number of bits per bin." DEFVAL { 15 } ::= { zxAnAdslLineConfProfileExtEntry 12 } zxAnAdslAtucConfBitSwapDs OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "enables/disables downstream bit swapping. Different line coding type has different default value. disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C C.x, G.Span/ADSL+ and G.Span Plus) enable(1) (default for Annex A) " DEFVAL { disable } ::= { zxAnAdslLineConfProfileExtEntry 13 } zxAnAdslAtucConfBitSwapUs OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "enables/disables upstream bit swapping. Different line coding type has different default value. disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C C.x, G.Span/ADSL+ and G.Span Plus) enable(1) (default for Annex A) " DEFVAL { disable } ::= { zxAnAdslLineConfProfileExtEntry 14 } zxAnAdslAtucConfReAdsl2Enable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Defines whether downstream READSL2 operation should be forced by the ATU-C." REFERENCE "Section 6.10.1 on page 66,Annex L ITU G.992.3" DEFVAL { disable } ::= { zxAnAdslLineConfProfileExtEntry 15 } zxAnAdslAtucConfPmL0Time OBJECT-TYPE SYNTAX INTEGER (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " PM configuration parameter,related to the L2 low power state. This parameter represents the minimum time between an exit from the L2 state and the next entry into the L2 state. " REFERENCE "Section 7.3.1.1.5 ITU G.997.1(05/2003) " DEFVAL { 240 } ::= { zxAnAdslLineConfProfileExtEntry 16 } zxAnAdslAtucConfPmL2Time OBJECT-TYPE SYNTAX INTEGER (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " PM configuration parameter,related to the L2 low power state. This parameter represents the minimum time between an entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State." REFERENCE "Section 7.3.1.1.6 ITU G.997.1(05/2003) " DEFVAL { 120 } ::= { zxAnAdslLineConfProfileExtEntry 17 } zxAnAdslAtucConfPmL2Atpr OBJECT-TYPE SYNTAX INTEGER (0..31) UNITS "dB" MAX-ACCESS read-create STATUS current DESCRIPTION " PM configuration parameter,related to the L2 low power state. This parameter represents the Maximum Aggregate Transmit Power Reduction (in dB) that can be performed through a single Power Trim in the L2 state. It ranges from 0 dB to 31 dB." REFERENCE "Section 7.3.1.1.3 ITU G.997.1(05/2003) " DEFVAL { 3 } ::= { zxAnAdslLineConfProfileExtEntry 18 } zxAdsl2ConfPsdMaskSelectUs OBJECT-TYPE SYNTAX INTEGER { adlu32Eu32(1), adlu36Eu36(2), adlu40Eu40(3), adlu44Eu44(4), adlu48Eu48(5), adlu52Eu52(6), adlu56Eu56(7), adlu60Eu60(8), adlu64Eu64(9) } MAX-ACCESS read-create STATUS current DESCRIPTION "The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled bits in adslLineTransAtucConfig of ADSL-LINE-EXT-MIB. adlu32Eu32 (1), - ADLU-32 / EU-32 adlu36Eu36 (2), - ADLU-36 / EU-36 adlu40Eu40 (3), - ADLU-40 / EU-40 adlu44Eu44 (4), - ADLU-44 / EU-44 adlu48Eu48 (5), - ADLU-48 / EU-48 adlu52Eu52 (6), - ADLU-52 / EU-52 adlu56Eu56 (7), - ADLU-56 / EU-56 adlu60Eu60 (8), - ADLU-60 / EU-60 adlu64Eu64 (9) - ADLU-64 / EU-61 " REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.11" DEFVAL { adlu32Eu32 } ::= { zxAnAdslLineConfProfileExtEntry 19 } ------------------------------------------------------------------------------ -- Atuc Channel Table ------------------------------------------------------------------------------ zxAnAdslAtucChanTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslAtucChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each Atuc channel. " ::= {zxAnAdslMibObjects 3} zxAnAdslAtucChanEntry OBJECT-TYPE SYNTAX ZxAnAdslAtucChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Adsl channel layer line actuals information entry" INDEX { ifIndex } ::= {zxAnAdslAtucChanTable 1} ZxAnAdslAtucChanEntry ::= SEQUENCE { zxAnAdslAtucChanInpEtr Unsigned32, zxAnAdslAtucChanInpEftr Unsigned32, zxAnAdslAtucChanInpMinEftr Unsigned32, zxAnAdslAtucChanInpActDelay INTEGER } zxAnAdslAtucChanInpEtr OBJECT-TYPE SYNTAX Unsigned32(0..52000) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters of downstream. The expected throughput (ETR)." ::= { zxAnAdslAtucChanEntry 1 } zxAnAdslAtucChanInpEftr OBJECT-TYPE SYNTAX Unsigned32(0..52000) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters of downstream. The error-free throughput (EFTR is defined as the average bit-rate at the alpha1/beta1 reference point, of bits originating from DTU's which have been detected to contain no error at the moment of crossing the alpha1/beta1 reference point." ::= { zxAnAdslAtucChanEntry 2 } zxAnAdslAtucChanInpMinEftr OBJECT-TYPE SYNTAX Unsigned32(0..52000) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters of downstream. The minimum error-free throughput (EFTR_min is defined as the minimum of the EFTR observed since the last reading of the EFTR_min." ::= { zxAnAdslAtucChanEntry 3 } zxAnAdslAtucChanInpActDelay OBJECT-TYPE SYNTAX INTEGER(0..63) UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters of downstream. If retransmission is used in a given transmit direction, this Object is defined as the actual value of the time-independent component of the delay between the alfa1 and beta1 reference points. This can be calculated as the minimum possible instantaneous delay between the alfa1 and beta1 reference points, based on the actual settings of the framing parameters." ::= { zxAnAdslAtucChanEntry 4 } ------------------------------------------------------------------------------ -- Atur Channel Table ------------------------------------------------------------------------------ zxAnAdslAturChanTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslAturChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR channel. " ::= {zxAnAdslMibObjects 4} zxAnAdslAturChanEntry OBJECT-TYPE SYNTAX ZxAnAdslAturChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Adsl channel layer line actuals information entry" INDEX { ifIndex } ::= {zxAnAdslAturChanTable 1} ZxAnAdslAturChanEntry ::= SEQUENCE { zxAnAdslAturChanInpEtr Unsigned32, zxAnAdslAturChanInpEftr Unsigned32, zxAnAdslAturChanInpMinEftr Unsigned32, zxAnAdslAturChanInpActDelay INTEGER } zxAnAdslAturChanInpEtr OBJECT-TYPE SYNTAX Unsigned32(0..52000) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters of upstream. The expected throughput (ETR)." ::= { zxAnAdslAturChanEntry 1 } zxAnAdslAturChanInpEftr OBJECT-TYPE SYNTAX Unsigned32(0..52000) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters of upstream.. The error-free throughput (EFTR is defined as the average bit-rate at the alpha1/beta1 reference point, of bits originating from DTU's which have been detected to contain no error at the moment of crossing the alpha1/beta1 reference point." ::= { zxAnAdslAturChanEntry 2 } zxAnAdslAturChanInpMinEftr OBJECT-TYPE SYNTAX Unsigned32(0..52000) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters of upstream. The minimum error-free throughput (EFTR_min is defined as the minimum of the EFTR observed since the last reading of the EFTR_min." ::= { zxAnAdslAturChanEntry 3 } zxAnAdslAturChanInpActDelay OBJECT-TYPE SYNTAX INTEGER(0..63) UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters of upstream. If retransmission is used in a given transmit direction, this Object is defined as the actual value of the time-independent component of the delay between the alfa1 and beta1 reference points. This can be calculated as the minimum possible instantaneous delay between the alfa1 and beta1 reference points, based on the actual settings of the framing parameters." ::= { zxAnAdslAturChanEntry 4 } ------------------------------------------------------------------------------ -- Adsl Line Alarm Profile Extended Table ------------------------------------------------------------------------------ zxAnAdslLineAlarmConfProfileExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslLineAlarmConfProfileExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Adsl line alarm config profile extended information table. The cycle of thresholds monitoring shoul be less than 5 minutes." ::= {zxAnAdslMibObjects 20} zxAnAdslLineAlarmConfProfileExtEntry OBJECT-TYPE SYNTAX ZxAnAdslLineAlarmConfProfileExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry extends the adslLineAlarmConfProfileEntry defined in [RFC2662]. Each entry corresponds to an ADSL line alarm profile." AUGMENTS { adslLineAlarmConfProfileEntry } ::= {zxAnAdslLineAlarmConfProfileExtTable 1} ZxAnAdslLineAlarmConfProfileExtEntry ::= SEQUENCE { zxAnAdslAtucConnRateTolerance INTEGER, zxAnAdslAturConnRateTolerance INTEGER, zxAnAdslAtucThreshConnRate Integer32, zxAnAdslAturThreshConnRate Integer32, zxAnAdslMaxAtucConnRateTolerance INTEGER, zxAnAdslMaxAturConnRateTolerance INTEGER, zxAnAdslMaxThreshAtucConnRate Integer32, zxAnAdslMaxThreshAturConnRate Integer32, zxAnAdslAturInitFailTrapEnable BITS, zxAnAdslThreshAtucInpLeftr INTEGER, zxAnAdslThreshAturInpLeftr INTEGER } zxAnAdslAtucConnRateTolerance OBJECT-TYPE SYNTAX INTEGER(0..100) UNITS "%" MAX-ACCESS read-create STATUS current DESCRIPTION " Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and actual adslAtucChanCurrTxRate. Calculation: 100*(adslAtucChanConfInterleaveMaxTxRate - adslAtucChanCurrTxRate) Difference =------------------------------------------------------------------- adslAtucChanConfInterleaveMaxTxRate If Difference is larger than zxAnAdslAtucConnRateTolerance, zxAnAdslAtucLowConnRateTrap trap will be sent. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { zxAnAdslLineAlarmConfProfileExtEntry 1 } zxAnAdslAturConnRateTolerance OBJECT-TYPE SYNTAX INTEGER(0..100) UNITS "%" MAX-ACCESS read-create STATUS current DESCRIPTION " Tolerance between configured adslAturChanConfInterleaveMaxTxRate and actual adslAturChanCurrTxRate. Calculation: 100*(adslAturChanConfInterleaveMaxTxRate - adslAturChanCurrTxRate) Difference =------------------------------------------------------------------- adslAturChanConfInterleaveMaxTxRate If Difference is larger than zxAnAdslAturConnRateTolerance, zxAnAdslAturLowConnRateTrap trap will be sent. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { zxAnAdslLineAlarmConfProfileExtEntry 2 } zxAnAdslAtucThreshConnRate OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION " Threshold of Atuc connection rate. If adslAtucChanCurrTxRate is lower than zxAnAdslAtucThreshConnRate, zxAnAdslAtucLowConnRateTrap trap will be sent. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { zxAnAdslLineAlarmConfProfileExtEntry 3 } zxAnAdslAturThreshConnRate OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION " Threshold of Atur connection rate. If adslAturChanCurrTxRate is lower than zxAnAdslAturThreshConnRate, zxAnAdslAturLowConnRateTrap trap will be sent. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { zxAnAdslLineAlarmConfProfileExtEntry 4 } zxAnAdslMaxAtucConnRateTolerance OBJECT-TYPE SYNTAX INTEGER(0..100) UNITS "%" MAX-ACCESS read-create STATUS current DESCRIPTION " Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and actual adslAtucChanCurrTxRate. Calculation: 100*(adslAtucChanCurrTxRate - adslAtucChanConfInterleaveMaxTxRate) Difference =------------------------------------------------------------------- adslAtucChanConfInterleaveMaxTxRate If Difference is larger than zxAnMaxAdslAtucConnRateTolerance, zxAnAdslAtucHighConnRateTrap trap will be sent. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { zxAnAdslLineAlarmConfProfileExtEntry 5 } zxAnAdslMaxAturConnRateTolerance OBJECT-TYPE SYNTAX INTEGER(0..100) UNITS "%" MAX-ACCESS read-create STATUS current DESCRIPTION " Tolerance between configured adslAturChanConfInterleaveMaxTxRate and actual adslAturChanCurrTxRate. Calculation: 100*(adslAturChanCurrTxRate - adslAturChanConfInterleaveMaxTxRate) Difference =------------------------------------------------------------------- adslAturChanConfInterleaveMaxTxRate If Difference is larger than zxAnAdslMaxAturConnRateTolerance, zxAnAdslAturHighConnRateTrap trap will be sent. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { zxAnAdslLineAlarmConfProfileExtEntry 6 } zxAnAdslMaxThreshAtucConnRate OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION " Threshold of Atuc connection rate. If adslAtucChanCurrTxRate is higher than zxAnAdslMaxThreshAtucConnRate, zxAnAdslAtucHighConnRateTrap trap will be sent. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { zxAnAdslLineAlarmConfProfileExtEntry 7 } zxAnAdslMaxThreshAturConnRate OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION " Threshold of Atur connection rate. If adslAturChanCurrTxRate is higher than zxAnAdslMaxThreshAturConnRate, zxAnAdslAturHighConnRateTrap trap will be sent. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { zxAnAdslLineAlarmConfProfileExtEntry 8 } zxAnAdslAturInitFailTrapEnable OBJECT-TYPE SYNTAX BITS{ unused1 (0), lossOfFraming (1), lossOfSignal (2), lossOfPower (3), unused2 (4), lossOfSignalQuality (5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enables and disables the InitFailureTrap on the atur interface. unused1 (0) - This bit is no use to enable or disable the the InitFailureTrap on the atur interface. lossOfFraming (1) - Value 0 means disable the loss of frame trap on the atur interface. lossOfSignal (2) - Value 0 means disable the loss of signal trap on the atur interface. lossOfPower (3) - Value 0 means disable the loss of power trap on the atur interface. unused2 (4) - This bit is no use to enable or disable the InitFailureTrap on the atur interface. lossOfSignalQuality (5) - Value 0 means disable the loss of signal quality trap on the atur interface. " ::= { zxAnAdslLineAlarmConfProfileExtEntry 9 } zxAnAdslThreshAtucInpLeftr OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "GINP configuration parameters of downstream. The fraction of NDR that shall be used as the threshold for leftr defects. lefter (The low error-free throughput rate) defect is defined as: A leftr defect occuurs when EFTR < EFTR_THRESH * NDR A leftr defect terminates when EFTR >= EFTR_THRESH * NDR When EFTR_THRESH is set to the special value of 0, ETR shall be used as the threshold in above inequalities: A leftr defect occurs when EFTR < ETR A leftr defect terminates when EFTR >=ETR. Valid values are from 0 to 100 in increments of 0.01. " DEFVAL { 0 } ::= { zxAnAdslLineAlarmConfProfileExtEntry 10 } zxAnAdslThreshAturInpLeftr OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "GINP configuration parameters of upstream. The fraction of NDR that shall be used as the threshold for leftr defects. lefter (The low error-free throughput rate) defect is defined as: A leftr defect occuurs when EFTR < EFTR_THRESH * NDR A leftr defect terminates when EFTR >= EFTR_THRESH * NDR When EFTR_THRESH is set to the special value of 0, ETR shall be used as the threshold in above inequalities: A leftr defect occurs when EFTR < ETR A leftr defect terminates when EFTR >=ETR. Valid values are from 0 to 100 in increments of 0.01. " DEFVAL { 0 } ::= { zxAnAdslLineAlarmConfProfileExtEntry 11 } -------------------------------------------------------------------------------- -- Atuc Performance Data Table -------------------------------------------------------------------------------- zxAnAdslAtucPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslAtucPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides atuc performance." ::= {zxAnAdslMibObjects 21} zxAnAdslAtucPerfDataEntry OBJECT-TYPE SYNTAX ZxAnAdslAtucPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "the entry for atuc channel performance." INDEX { ifIndex } ::= {zxAnAdslAtucPerfDataTable 1} ZxAnAdslAtucPerfDataEntry ::= SEQUENCE { zxAnAdslAtucPerfDataFecs Counter32, zxAnAdslAtucPerfDataCurr15Fecs Counter32, zxAnAdslAtucPerfDataCurr1DayFecs Counter32, zxAnAdslAtucPerfDataPrev1DayFecs Counter32 } zxAnAdslAtucPerfDataFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event on this channel." REFERENCE "ITU-T G.997.1, paragraph #7.2.1" ::= { zxAnAdslAtucPerfDataEntry 1 } zxAnAdslAtucPerfDataCurr15Fecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the current 15 minute time interval." REFERENCE "ITU-T G.997.1, paragraph #7.2.1" ::= { zxAnAdslAtucPerfDataEntry 2 } zxAnAdslAtucPerfDataCurr1DayFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the current 1 day interval." REFERENCE "ITU-T G.997.1, paragraph #7.2.1" ::= { zxAnAdslAtucPerfDataEntry 3 } zxAnAdslAtucPerfDataPrev1DayFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the most recent previous 1-day period." REFERENCE "ITU-T G.997.1, paragraph #7.2.1" ::= { zxAnAdslAtucPerfDataEntry 4 } -------------------------------------------------------------------------------- -- Atur Performance Data Table -------------------------------------------------------------------------------- zxAnAdslAturPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslAturPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides atur performance." ::= {zxAnAdslMibObjects 22} zxAnAdslAturPerfDataEntry OBJECT-TYPE SYNTAX ZxAnAdslAturPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "the entry for atur performance." INDEX { ifIndex } ::= {zxAnAdslAturPerfDataTable 1} ZxAnAdslAturPerfDataEntry ::= SEQUENCE { zxAnAdslAturPerfDataFecs Counter32, zxAnAdslAturPerfDataCurr15Fecs Counter32, zxAnAdslAturPerfDataCurr1DayFecs Counter32, zxAnAdslAturPerfDataPrev1DayFecs Counter32 } zxAnAdslAturPerfDataFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event on this channel." REFERENCE "ITU-T G.997.1, paragraph #7.2.1" ::= { zxAnAdslAturPerfDataEntry 1 } zxAnAdslAturPerfDataCurr15Fecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the current 15 minute time interval." REFERENCE "ITU-T G.997.1, paragraph #7.2.1" ::= { zxAnAdslAturPerfDataEntry 2 } zxAnAdslAturPerfDataCurr1DayFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the current 1 day interval." REFERENCE "ITU-T G.997.1, paragraph #7.2.1" ::= { zxAnAdslAturPerfDataEntry 3 } zxAnAdslAturPerfDataPrev1DayFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the most recent previous 1-day period." REFERENCE "ITU-T G.997.1, paragraph #7.2.1" ::= { zxAnAdslAturPerfDataEntry 4 } -------------------------------------------------------------------------------- -- Atuc Channel Performance Data Table -------------------------------------------------------------------------------- zxAnAdslAtucChanPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslAtucChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides atuc channel performance." ::= {zxAnAdslMibObjects 23} zxAnAdslAtucChanPerfDataEntry OBJECT-TYPE SYNTAX ZxAnAdslAtucChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "the entry for atuc channel performance." INDEX { ifIndex } ::= {zxAnAdslAtucChanPerfDataTable 1} ZxAnAdslAtucChanPerfDataEntry ::= SEQUENCE { zxAnAtucChanPerfCurr15RtxDtu Counter32, zxAnAtucChanPerfCurr15RtxCDtu Counter32, zxAnAtucChanPerfCurr15RtxUcDtu Counter32, zxAnAtucChanPerfCurr1DRtxDtu Counter32, zxAnAtucChanPerfCurr1DRtxCDtu Counter32, zxAnAtucChanPerfCurr1DRtxUcDtu Counter32 } zxAnAtucChanPerfCurr15RtxDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current 15 minute interval. Multiple retransmission of the same DTU is counted as many times as it has been retransmitted. " ::= { zxAnAdslAtucChanPerfDataEntry 1 } zxAnAtucChanPerfCurr15RtxCDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission in the current 15 minute interval" ::= { zxAnAdslAtucChanPerfDataEntry 2 } zxAnAtucChanPerfCurr15RtxUcDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission in the current 15 minute interval." ::= { zxAnAdslAtucChanPerfDataEntry 3 } zxAnAtucChanPerfCurr1DRtxDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current day interval. Multiple retransmission of the same DTU is counted as many times as it has been retransmitted. " ::= { zxAnAdslAtucChanPerfDataEntry 4 } zxAnAtucChanPerfCurr1DRtxCDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission in the current day interval" ::= { zxAnAdslAtucChanPerfDataEntry 5 } zxAnAtucChanPerfCurr1DRtxUcDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission." ::= { zxAnAdslAtucChanPerfDataEntry 6 } -------------------------------------------------------------------------------- -- Atur Channel Performance Data Table -------------------------------------------------------------------------------- zxAnAdslAturChanPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslAturChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides atur channel performance." ::= {zxAnAdslMibObjects 24} zxAnAdslAturChanPerfDataEntry OBJECT-TYPE SYNTAX ZxAnAdslAturChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "the entry for atur channel performance." INDEX { ifIndex } ::= {zxAnAdslAturChanPerfDataTable 1} ZxAnAdslAturChanPerfDataEntry ::= SEQUENCE { zxAnAturChanPerfCurr15RtxDtu Counter32, zxAnAturChanPerfCurr15RtxCDtu Counter32, zxAnAturChanPerfCurr15RtxUcDtu Counter32, zxAnAturChanPerfCurr1DRtxDtu Counter32, zxAnAturChanPerfCurr1DRtxCDtu Counter32, zxAnAturChanPerfCurr1DRtxUcDtu Counter32 } zxAnAturChanPerfCurr15RtxDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current 15 minute interval. Multiple retransmission of the same DTU is counted as many times as it has been retransmitted. " ::= { zxAnAdslAturChanPerfDataEntry 1 } zxAnAturChanPerfCurr15RtxCDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission in the current 15 minute interval" ::= { zxAnAdslAturChanPerfDataEntry 2 } zxAnAturChanPerfCurr15RtxUcDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission in the current 15 minute interval." ::= { zxAnAdslAturChanPerfDataEntry 3 } zxAnAturChanPerfCurr1DRtxDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current day interval. Multiple retransmission of the same DTU is counted as many times as it has been retransmitted. " ::= { zxAnAdslAturChanPerfDataEntry 4 } zxAnAturChanPerfCurr1DRtxCDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission in the current day interval" ::= { zxAnAdslAturChanPerfDataEntry 5 } zxAnAturChanPerfCurr1DRtxUcDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission." ::= { zxAnAdslAturChanPerfDataEntry 6 } ------------------------------------------------------------------------------ -- Atuc Channel Interval Performance Table ------------------------------------------------------------------------------ zxAnAdslAtucChanIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslAtucChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table zxAnAdslAtucChanIntervalTable contains history Performance Monitoring results for 15min of DSL channel. " ::= { zxAnAdslMibObjects 25 } zxAnAdslAtucChanIntervalEntry OBJECT-TYPE SYNTAX ZxAnAdslAtucChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table zxAnAdslAtucChanIntervalTable contains history Performance Monitoring results for 15min of DSL channel. " AUGMENTS { adslAtucChanIntervalEntry } ::= { zxAnAdslAtucChanIntervalTable 1 } ZxAnAdslAtucChanIntervalEntry ::= SEQUENCE { zxAnAdslAtucChanIntervalRtxDtu Counter32, zxAnAdslAtucChanIntervalRtxCDtu Counter32, zxAnAdslAtucChanIntervalRtxUcDtu Counter32 } zxAnAdslAtucChanIntervalRtxDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple retransmission of the same DTU is counted as many times as it has been retransmitted. " ::= { zxAnAdslAtucChanIntervalEntry 1 } zxAnAdslAtucChanIntervalRtxCDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission during this interval." ::= { zxAnAdslAtucChanIntervalEntry 2 } zxAnAdslAtucChanIntervalRtxUcDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. during this interval." ::= { zxAnAdslAtucChanIntervalEntry 3 } ------------------------------------------------------------------------------ -- Atur Channel Interval Performance Table ------------------------------------------------------------------------------ zxAnAdslAturChanIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslAturChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table zxAnAdslAturChanIntervalTable contains history Performance Monitoring results for 15min of DSL channel. " ::= { zxAnAdslMibObjects 26 } zxAnAdslAturChanIntervalEntry OBJECT-TYPE SYNTAX ZxAnAdslAturChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table zxAnAdslAturChanIntervalTable contains history Performance Monitoring results for 15min of DSL channel. " AUGMENTS { adslAturChanIntervalEntry } ::= { zxAnAdslAturChanIntervalTable 1 } ZxAnAdslAturChanIntervalEntry ::= SEQUENCE { zxAnAdslAturChanIntervalRtxDtu Counter32, zxAnAdslAturChanIntervalRtxCDtu Counter32, zxAnAdslAturChanIntervalRtxUcDtu Counter32 } zxAnAdslAturChanIntervalRtxDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple retransmission of the same DTU is counted as many times as it has been retransmitted. " ::= { zxAnAdslAturChanIntervalEntry 1 } zxAnAdslAturChanIntervalRtxCDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission during this interval." ::= { zxAnAdslAturChanIntervalEntry 2 } zxAnAdslAturChanIntervalRtxUcDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. during this interval." ::= { zxAnAdslAturChanIntervalEntry 3 } ------------------------------------------------------------------------------ -- Atuc Channel history 1 Day Performance Table ------------------------------------------------------------------------------ zxAnAdslAtucChanHist1DayTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslAtucChanHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table zxAnAdslAtucChanHist1DayTable contains channel history for 1 day intervals of DSL. " ::= { zxAnAdslMibObjects 27 } zxAnAdslAtucChanHist1DayEntry OBJECT-TYPE SYNTAX ZxAnAdslAtucChanHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table zxAnAdslAtucChanHist1DayTable contains PM channel history for 1 day intervals of DSL. The indexes of this table is an interface index where the interface has an ifType value which is applicable for a DSL channel, the termination unit and the interval number." INDEX { ifIndex,zxAnAdslAtucChanHist1DayNumber } ::= { zxAnAdslAtucChanHist1DayTable 1 } ZxAnAdslAtucChanHist1DayEntry ::= SEQUENCE { zxAnAdslAtucChanHist1DayNumber INTEGER, zxAnAdslAtucChanHist1DayRtxDtu Counter32, zxAnAdslAtucChanHist1DayRtxCDtu Counter32, zxAnAdslAtucChanHist1DayRtxUcDtu Counter32 } zxAnAdslAtucChanHist1DayNumber OBJECT-TYPE SYNTAX INTEGER(1..30) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interval number." ::= { zxAnAdslAtucChanHist1DayEntry 1 } zxAnAdslAtucChanHist1DayRtxDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple retransmission of the same DTU is counted as many times as it has been retransmitted." ::= { zxAnAdslAtucChanHist1DayEntry 2 } zxAnAdslAtucChanHist1DayRtxCDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission during this interval." ::= { zxAnAdslAtucChanHist1DayEntry 3 } zxAnAdslAtucChanHist1DayRtxUcDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission during this interval." ::= { zxAnAdslAtucChanHist1DayEntry 4 } ------------------------------------------------------------------------------ -- Atur Channel history 1 Day Performance Table ------------------------------------------------------------------------------ zxAnAdslAturChanHist1DayTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnAdslAturChanHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table zxAnAdslAturChanHist1DayTable contains channel history for 1 day intervals of DSL. " ::= { zxAnAdslMibObjects 28 } zxAnAdslAturChanHist1DayEntry OBJECT-TYPE SYNTAX ZxAnAdslAturChanHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table zxAnAdslAturChanHist1DayTable contains PM channel history for 1 day intervals of DSL. The indexes of this table is an interface index where the interface has an ifType value which is applicable for a DSL channel, the termination unit and the interval number." INDEX { ifIndex,zxAnAdslAturChanHist1DayNumber } ::= { zxAnAdslAturChanHist1DayTable 1 } ZxAnAdslAturChanHist1DayEntry ::= SEQUENCE { zxAnAdslAturChanHist1DayNumber INTEGER, zxAnAdslAturChanHist1DayRtxDtu Counter32, zxAnAdslAturChanHist1DayRtxCDtu Counter32, zxAnAdslAturChanHist1DayRtxUcDtu Counter32 } zxAnAdslAturChanHist1DayNumber OBJECT-TYPE SYNTAX INTEGER(1..30) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interval number." ::= { zxAnAdslAturChanHist1DayEntry 1 } zxAnAdslAturChanHist1DayRtxDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple retransmission of the same DTU is counted as many times as it has been retransmitted." ::= { zxAnAdslAturChanHist1DayEntry 2 } zxAnAdslAturChanHist1DayRtxCDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission during this interval." ::= { zxAnAdslAturChanHist1DayEntry 3 } zxAnAdslAturChanHist1DayRtxUcDtu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission during this interval." ::= { zxAnAdslAturChanHist1DayEntry 4 } -------------------------------------------------------------------------------- -- Dsl Loopback Test Table -------------------------------------------------------------------------------- zxAnDslLoopBackTestTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnDslLoopBackTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each DSL line loopback test." ::= {zxAnAdslMibObjects 30} zxAnDslLoopBackTestEntry OBJECT-TYPE SYNTAX ZxAnDslLoopBackTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DSL line loopback test information entry" INDEX { zxAnDslLoopBackTestRack,zxAnDslLoopBackTestShelf, zxAnDslLoopBackTestSlot,zxAnDslLoopBackTestPort, zxAnDslLoopBackTestBridgePort } ::= {zxAnDslLoopBackTestTable 1} ZxAnDslLoopBackTestEntry ::= SEQUENCE { zxAnDslLoopBackTestRack Integer32, zxAnDslLoopBackTestShelf Integer32, zxAnDslLoopBackTestSlot Integer32, zxAnDslLoopBackTestPort Integer32, zxAnDslLoopBackTestBridgePort Integer32, zxAnDslLoopBackTestType INTEGER, zxAnDslLoopBackTestOperStatus INTEGER, zxAnDslLoopBackTestResult INTEGER, zxAnDslLoopBackTestConfSendCells Integer32, zxAnDslLoopBackTestResultRecivedCells Integer32, zxAnDslLoopBackTestRowStatus RowStatus } zxAnDslLoopBackTestRack OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rack number of the dsl port." ::= { zxAnDslLoopBackTestEntry 1 } zxAnDslLoopBackTestShelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Shelf number of the dsl port." ::= { zxAnDslLoopBackTestEntry 2 } zxAnDslLoopBackTestSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot number of the dsl port." ::= { zxAnDslLoopBackTestEntry 3 } zxAnDslLoopBackTestPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The dsl port number." ::= { zxAnDslLoopBackTestEntry 4 } zxAnDslLoopBackTestBridgePort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Dsl bridge port index. eg.It is PVC ID in ADSL port. If the test is only in the physical port,then this fileds will be 0" ::= { zxAnDslLoopBackTestEntry 5 } zxAnDslLoopBackTestType OBJECT-TYPE SYNTAX INTEGER { noOper(0), -- No operation cancle(1), -- Cancle this test utopia(2), -- Utopia loopback test afe(3), -- AFE loopback test hybrid(4), -- Hybrid loopback test xTUC_OAM(5),-- ATUC data path loopback test,such as ATM OAM loopback. xTUR_OAM(6), -- ATUR data path loopback test,such as ATM OAM loopback. xTUR_CC(7), -- ATUR ATM continuity cell test. digital(8) -- ATUC DSP module loopback test. } MAX-ACCESS read-create STATUS current DESCRIPTION "This is loop test action expected. NOTES: " ::= { zxAnDslLoopBackTestEntry 6 } zxAnDslLoopBackTestOperStatus OBJECT-TYPE SYNTAX INTEGER { neverExcute(0), -- Never excute test excuting(1), -- Excuting test now excuted(2), -- Test has been excuted faliedToCommit(3) -- Falied to commit test command to DSL card. } MAX-ACCESS read-only STATUS current DESCRIPTION "This is loop test operational status. Note: if zxAnDslLoopBackTestOperStatus equal to Excuting(1), ifOperStaus should be loopback test(3). " ::= { zxAnDslLoopBackTestEntry 7 } zxAnDslLoopBackTestResult OBJECT-TYPE SYNTAX INTEGER { noResult(0), success(1), generalFailed(2), -- Test failed but no detailed reason. noSupport(3), -- Current DSL card doesn't support this test. unkown(4), -- Unkown the test result. noSuchPort(5), -- No this port on dsl card loopBackFailed(6),-- Loop back failed on dsl card portNotActive(7), -- Some test can't be excuted when port is not actived. portInTesting(8), -- Port in testing and can't excute the new test portInService(9), -- Port in service and can't excute the test portFailures(10), -- Port has failures and can't excute the test cardFailures(11), -- Dsl card has failures and can't excute the test noPvcFound(12), -- No PVC found on the test port unknownTestType(13) -- The test type is not UTOPIA,AFE,HYBRID,ATUC-OAM or ATUR-OAM } MAX-ACCESS read-only STATUS current DESCRIPTION "This is loop test result and includes reasons for test failures." ::= { zxAnDslLoopBackTestEntry 8 } zxAnDslLoopBackTestConfSendCells OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The count of cells will be sent in the loopback test." ::= { zxAnDslLoopBackTestEntry 9 } zxAnDslLoopBackTestResultRecivedCells OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of recived cells in the loopback test." ::= { zxAnDslLoopBackTestEntry 10 } zxAnDslLoopBackTestRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Loop test table RowStatus . " ::= { zxAnDslLoopBackTestEntry 15 } ------------------------------------------------------------------------------ -- trap definitions ------------------------------------------------------------------------------ zxAnAdslTraps OBJECT IDENTIFIER ::= { zxAnAdslMib 2 } zxAnAdslAtuxConnRateOverThreshTrap NOTIFICATION-TYPE OBJECTS { adslAtucChanConfInterleaveMaxTxRate, adslAtucChanCurrTxRate } STATUS current DESCRIPTION "zxAnAdslAtucConnRateTolerance threshold or zxAnAdslAtucThreshConnRate reached." ::= { zxAnAdslTraps 1 } zxAnAdslAtuxConnRateUnderThreshTrap NOTIFICATION-TYPE OBJECTS { adslAtucChanConfInterleaveMaxTxRate, adslAtucChanCurrTxRate } STATUS current DESCRIPTION " AtucConnRate Difference is below threshold of zxAnAdslAtucConnRateTolerance. Or adslAtucChanCurrTxRate is below threshold of zxAnAdslAtucThreshConnRate. " ::= { zxAnAdslTraps 2 } zxAnAdslAtucHighConnRateTrap NOTIFICATION-TYPE OBJECTS { adslAtucChanConfInterleaveMaxTxRate, adslAtucChanCurrTxRate, zxAnAdslMaxThreshAtucConnRate, zxAnAdslMaxAtucConnRateTolerance} STATUS current DESCRIPTION "zxAnAdslMaxAtucConnRateTolerance threshold or zxAnAdslMaxThreshAtucConnRate reached." ::= { zxAnAdslTraps 3 } zxAnAdslAtucHighConnRateClearTrap NOTIFICATION-TYPE OBJECTS { adslAtucChanConfInterleaveMaxTxRate, adslAtucChanCurrTxRate, zxAnAdslMaxThreshAtucConnRate, zxAnAdslMaxAtucConnRateTolerance} STATUS current DESCRIPTION "zxAnAdslAtucHighConnRateTrap clear." ::= { zxAnAdslTraps 4 } zxAnAdslAtucLowConnRateTrap NOTIFICATION-TYPE OBJECTS { adslAtucChanConfInterleaveMaxTxRate, adslAtucChanCurrTxRate, zxAnAdslAtucThreshConnRate, zxAnAdslAtucConnRateTolerance} STATUS current DESCRIPTION "zxAnAdslAtucConnRateTolerance threshold or zxAnAdslAtucThreshConnRate reached." ::= { zxAnAdslTraps 5 } zxAnAdslAtucLowConnRateClearTrap NOTIFICATION-TYPE OBJECTS { adslAtucChanConfInterleaveMaxTxRate, adslAtucChanCurrTxRate, zxAnAdslAtucThreshConnRate, zxAnAdslAtucConnRateTolerance} STATUS current DESCRIPTION " zxAnAdslAtucLowConnRateTrap clear." ::= { zxAnAdslTraps 6 } zxAnAdslAturHighConnRateTrap NOTIFICATION-TYPE OBJECTS { adslAturChanConfInterleaveMaxTxRate, adslAturChanCurrTxRate, zxAnAdslMaxThreshAturConnRate, zxAnAdslMaxAturConnRateTolerance} STATUS current DESCRIPTION "zxAnAdslMaxAturConnRateTolerance threshold or zxAnAdslMaxThreshAturConnRate reached." ::= { zxAnAdslTraps 7 } zxAnAdslAturHighConnRateClearTrap NOTIFICATION-TYPE OBJECTS { adslAturChanConfInterleaveMaxTxRate, adslAturChanCurrTxRate, zxAnAdslMaxThreshAturConnRate, zxAnAdslMaxAturConnRateTolerance} STATUS current DESCRIPTION "zxAnAdslAturHighConnRateTrap clear." ::= { zxAnAdslTraps 8 } zxAnAdslAturLowConnRateTrap NOTIFICATION-TYPE OBJECTS { adslAturChanConfInterleaveMaxTxRate, adslAturChanCurrTxRate, zxAnAdslAturThreshConnRate, zxAnAdslAturConnRateTolerance} STATUS current DESCRIPTION "zxAnAdslAturConnRateTolerance threshold or zxAnAdslAturThreshConnRate reached." ::= { zxAnAdslTraps 9 } zxAnAdslAturLowConnRateClearTrap NOTIFICATION-TYPE OBJECTS { adslAturChanConfInterleaveMaxTxRate, adslAturChanCurrTxRate, zxAnAdslAturThreshConnRate, zxAnAdslAturConnRateTolerance} STATUS current DESCRIPTION " zxAnAdslAturLowConnRateTrap clear." ::= { zxAnAdslTraps 10 } END