905 lines
33 KiB
Plaintext
905 lines
33 KiB
Plaintext
--SupermicroDOT11u Proprietary MIB Definition
|
|
-- /*****************************************************************
|
|
-- * *
|
|
-- * $RCSfile: dot11u.mib,v $ *
|
|
-- * *
|
|
-- * $Date: 2013/04/06 13:16:44 $ *
|
|
-- * *
|
|
-- * $Revision: 1.2 $ *
|
|
-- * *
|
|
-- ****************************************************************/
|
|
|
|
-- SupermicroDOT11 and DOT11u MIBs.
|
|
|
|
-- The MIB contains scalars used to configure SupermicroDOT11 functionally.
|
|
|
|
SUPERMICRO-DOT11u-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE, MODULE-IDENTITY, IpAddress,
|
|
Counter32, Integer32,
|
|
enterprises FROM SNMPv2-SMI
|
|
DisplayString,
|
|
TruthValue, RowStatus, MacAddress FROM SNMPv2-TC;
|
|
|
|
|
|
dot11MIB MODULE-IDENTITY
|
|
LAST-UPDATED "201212200000Z"
|
|
ORGANIZATION "Super Micro Computer Inc."
|
|
CONTACT-INFO
|
|
|
|
"Super Micro Computer Inc.
|
|
E-mail:support@Supermicro.com"
|
|
|
|
DESCRIPTION
|
|
"This proprietary MIB for Supermicro Dot11u is for
|
|
IEEE 802.11u standard entities."
|
|
REVISION "201212200000Z"
|
|
DESCRIPTION " This mib module is for Supermicro Dot11u module"
|
|
::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(2) 78}
|
|
|
|
dot11MIBObjects OBJECT IDENTIFIER ::= { dot11MIB 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- groups in the dot11u MIB
|
|
-- -------------------------------------------------------------
|
|
|
|
dot11GASAdvertisement OBJECT IDENTIFIER ::= { dot11MIBObjects 1 }
|
|
dot11StationConfig OBJECT IDENTIFIER ::= { dot11MIBObjects 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
|
|
|
|
dot11StationConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot11StationConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Station Configuration attributes. In tablular form to
|
|
allow for multiple instances on an agent."
|
|
::= { dot11StationConfig 1 }
|
|
|
|
dot11StationConfigEntry OBJECT-TYPE
|
|
SYNTAX Dot11StationConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the dot11StationConfigTable. It is
|
|
possible for there to be multiple IEEE 802.11 interfaces
|
|
on one agent, each with its unique MAC address. The
|
|
relationship between an IEEE 802.11 interface and an
|
|
interface in the context of the Internet-standard MIB is
|
|
one-to-one. As such, the value of an ifIndex object
|
|
instance can be directly used to identify corresponding
|
|
instances of the objects defined herein.
|
|
|
|
ifIndex - Each IEEE 802.11 interface is represented by an
|
|
ifEntry. Interface tables in this MIB module are indexed
|
|
by ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { dot11StationConfigTable 1 }
|
|
|
|
Dot11StationConfigEntry ::=
|
|
SEQUENCE {
|
|
ifIndex INTEGER,
|
|
dot11InterworkingServiceImplemented TruthValue,
|
|
dot11InterworkingServiceActivated TruthValue,
|
|
dot11QosmapImplemented TruthValue,
|
|
dot11QosMapActivated TruthValue,
|
|
dot11EBRImplemented TruthValue,
|
|
dot11EBRActivated TruthValue,
|
|
dot11ESNetwork TruthValue,
|
|
dot11SSPNInterfaceImplemented TruthValue,
|
|
dot11SSPNInterfaceActivated TruthValue,
|
|
dot11HESSID MacAddress,
|
|
dot11EASImplemented TruthValue,
|
|
dot11EASActivated TruthValue,
|
|
dot11MSGCFImplemented TruthValue,
|
|
dot11MSGCFActivated TruthValue,
|
|
dot11StationID MacAddress,
|
|
dot11MediumOccupancyLimit INTEGER ,
|
|
dot11CFPollable TruthValue,
|
|
dot11CFPPeriod INTEGER,
|
|
dot11CFPMaxDuration INTEGER,
|
|
dot11AuthenticationResponseTimeOut Unsigned32,
|
|
dot11PrivacyOptionImplemented TruthValue,
|
|
dot11PowerManagementMode INTEGER,
|
|
dot11DesiredSSID OCTET STRING,
|
|
dot11DesiredBSSType INTEGER,
|
|
dot11OperationalRateSet OCTET STRING,
|
|
dot11BeaconPeriod INTEGER,
|
|
dot11DTIMPeriod INTEGER,
|
|
dot11AssociationResponseTimeOut Unsigned32,
|
|
dot11DisassociateReason INTEGER,
|
|
dot11DisassociateStation MacAddress,
|
|
dot11DeauthenticateReason INTEGER,
|
|
dot11DeauthenticateStation MacAddress,
|
|
dot11AuthenticateFailStatus INTEGER,
|
|
dot11AuthenticateFailStation MacAddress,
|
|
dot11MultiDomainCapabilityImplemented TruthValue,
|
|
dot11MultiDomainCapabilityEnabled TruthValue,
|
|
dot11CountryString OCTET STRING
|
|
}
|
|
-- HS Group
|
|
-- This group defines objects for DOT11 and DOT11u.
|
|
|
|
ifIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable.
|
|
It is written by an external management entity or the SME.
|
|
Changes take effect as soon as practical in the implementation.
|
|
The one octet identification number for the GAS Advertisement
|
|
Protocol, as defined in Table7-43bi, for which statistics are
|
|
stored the logical row of the GASAdvertisement table."
|
|
::= { dot11StationConfigEntry 1 }
|
|
|
|
dot11InterworkingServiceImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a capability variable.
|
|
Its value is determined by device capabilities.
|
|
This attribute when true, indicates the STA is capable of
|
|
interworking with external networks. A STA setting this to
|
|
TRUE implements Interworking Service. When this is false, the
|
|
STA does not implement Interworking Service."
|
|
DEFVAL {true}
|
|
::= { dot11StationConfigEntry 2 }
|
|
|
|
|
|
dot11InterworkingServiceActivated OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a capability variable.
|
|
Its value is determined by device capabilities.
|
|
This attribute when true, indicates the STA is capable of
|
|
interworking with external networks. A STA setting this to
|
|
TRUE implements Interworking Service. When this is false, the
|
|
STA does not implement Interworking Service."
|
|
DEFVAL {true}
|
|
::= { dot11StationConfigEntry 3 }
|
|
|
|
|
|
dot11QosmapImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a capability variable.
|
|
Its value is determined by device capabilities.
|
|
This attribute available at STAs, when true, indicates the
|
|
STA is capable of supporting the QoS Map procedures. When
|
|
this is set to FALSE, the STA does not implement QoS Map
|
|
procedures.."
|
|
DEFVAL {false}
|
|
::= { dot11StationConfigEntry 4 }
|
|
|
|
|
|
dot11QosMapActivated OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
".This is a control variable.
|
|
It is written by an external management entity or the SME. Changes take effect as soon as practical in the implementation.
|
|
This attribute, when true, indicates the capability of the
|
|
TA to support QoS Map procedures is enabled. The capability
|
|
s disabled otherwise.."
|
|
DEFVAL {false}
|
|
::= { dot11StationConfigEntry 5 }
|
|
|
|
|
|
dot11EBRImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a capability variable.
|
|
ts value is determined by device capabilities.
|
|
his attribute available at STAs, when true, indicates the
|
|
TA is capable of supporting Expedited Bandwidth Request
|
|
rocedures. When this is false, the STA does not implement
|
|
xpedited Bandwidth Request procedures.."
|
|
DEFVAL {false}
|
|
::= { dot11StationConfigEntry 6 }
|
|
|
|
|
|
dot11EBRActivated OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable.
|
|
t is written by an external management entity or the SME. Changes take effect as soon as practical in the implementation.
|
|
his attribute, when true, indicates the capability of the
|
|
TA to support Expedited Bandwidth Request procedures is
|
|
nabled. The capability is disabled otherwise.."
|
|
DEFVAL {false}
|
|
::= { dot11StationConfigEntry 7}
|
|
|
|
|
|
dot11ESNetwork OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable.
|
|
t is written by an external management entity or the SME. Changes take effect as soon as practical in the implementation.
|
|
he Emergency Services Access Network Type set to TRUE
|
|
ndicates that the BSS is used exclusively for the purposes of accessing emergency services. This object is not used by non-AP STAs.."
|
|
::= { dot11StationConfigEntry 8 }
|
|
|
|
|
|
dot11SSPNInterfaceImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
".This is a capability variable.
|
|
Its value is determined by device capabilities.
|
|
This attribute when true, indicates the AP is capable of SSPN
|
|
Interface service. When this is false, the STA does not
|
|
implement SSPN Interface Service. This object is not used by
|
|
non-AP STAs. The default value of this attribute is false.."
|
|
DEFVAL {false}
|
|
::= { dot11StationConfigEntry 9 }
|
|
|
|
|
|
dot11SSPNInterfaceActivated OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
".This is a control variable.
|
|
It is written by an external management entity or the SME.
|
|
Changes take effect as soon as practical in the implementation.
|
|
This attribute, when true, indicates the capability of the AP
|
|
to provide SSPN Interface service is enabled. The capability is
|
|
disabled, otherwise. The default value of this attribute is
|
|
false.."
|
|
DEFVAL {false}
|
|
::= { dot11StationConfigEntry 10 }
|
|
|
|
|
|
dot11HESSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
".This is a control variable.
|
|
It is written by an external management entity or the SME. Changes take effect for the next MLME-Start.request
|
|
primitive.
|
|
This attribute is used by an AP and is the 6-octet
|
|
homogeneous ESS identifier field, whose value is set to one of the BSSIDs in the ESS. It is required that the same value
|
|
of HESSID be used for all BSSs in the homogeneous ESS.."
|
|
::= { dot11StationConfigEntry 11 }
|
|
|
|
|
|
dot11EASImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
".This is a capability variable.
|
|
Its value is determined by device capabilities.
|
|
This attribute when true, indicates the STA is capable of
|
|
emergency alert system notification with external networks. A
|
|
STA setting this to TRUE implements emergency alert system
|
|
notification. When this is false, the STA does not implement
|
|
emergency alert system notification.."
|
|
DEFVAL {false}
|
|
::= { dot11StationConfigEntry 12 }
|
|
|
|
|
|
dot11EASActivated OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable.
|
|
It is written by an external management entity or the SME.
|
|
Changes take effect as soon as practical
|
|
This attribute when true, indicates the STA is capable of
|
|
supporting emergency alert system. The capability is disabled
|
|
otherwise.."
|
|
DEFVAL {false}
|
|
::= { dot11StationConfigEntry 13 }
|
|
|
|
|
|
dot11MSGCFImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a capability variable.
|
|
Its value is determined by device capabilities.
|
|
This attribute when true, indicates the non-AP STA is capable
|
|
of supporting the MSGCF procedures defined in 11B. When false,
|
|
the non-AP STA does not implement MSGCF procedures. This object
|
|
is not used by APs. The default value of this attribute is
|
|
false.."
|
|
DEFVAL {false}
|
|
::= { dot11StationConfigEntry 14 }
|
|
|
|
|
|
dot11MSGCFActivated OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable.
|
|
It is written by an external management entity or the SME.
|
|
Changes take effect as soon as practical in the implementation.
|
|
This attribute, when true, indicates the capability of the non-
|
|
AP STA to provide the MSGCF is enabled. The capability is
|
|
disabled, otherwise. The default value of this attribute is
|
|
false.."
|
|
DEFVAL {false}
|
|
::= { dot11StationConfigEntry 15 }
|
|
|
|
|
|
dot11StationID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The purpose of dot11StationID is to allow a manager to identify
|
|
a station for its own purposes. This attribute provides
|
|
for that eventuality while keeping the true MAC address
|
|
independent. Its syntax is MAC address and default value
|
|
is the station's assigned, unique MAC address."
|
|
|
|
::= { dot11StationConfigEntry 16 }
|
|
|
|
dot11MediumOccupancyLimit OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the maximum amount of time,
|
|
in TU, that a point coordinator may control the usage of
|
|
the wireless medium without relinquishing control for long
|
|
enough to allow at least one instance of DCF access to the
|
|
medium. The default value of this attribute shall be 100,
|
|
and the maximum value shall be 1000."
|
|
|
|
::= { dot11StationConfigEntry 17 }
|
|
|
|
dot11CFPollable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"When this attribute is true, it shall indicate that the STA
|
|
is able to respond to a CF-Poll with a data frame within a
|
|
SIFS time. This attribute shall be false if the STA is not
|
|
able to respond to a CF-Poll with a data frame within a SIFS
|
|
time."
|
|
|
|
::= { dot11StationConfigEntry 18 }
|
|
|
|
dot11CFPPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The attribute shall describe the number of DTIM intervals
|
|
between the start of CFPs. It is modified by
|
|
MLME-START.request primitive."
|
|
|
|
::= { dot11StationConfigEntry 19 }
|
|
|
|
dot11CFPMaxDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The attribute shall describe the maximum duration of the CFP
|
|
in TU that may be generated by the PCF. It is modified by
|
|
MLME-START.request primitive."
|
|
|
|
::= { dot11StationConfigEntry 20 }
|
|
|
|
dot11AuthenticationResponseTimeOut OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..4294967295)
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute shall specify the number of TU that a
|
|
responding STA should wait for the next frame in the
|
|
authentication sequence."
|
|
|
|
::= { dot11StationConfigEntry 21 }
|
|
|
|
dot11PrivacyOptionImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This attribute, when true, shall indicate that the IEEE
|
|
802.11 WEP option is implemented. The default value of
|
|
this attribute shall be false."
|
|
|
|
::= { dot11StationConfigEntry 22 }
|
|
|
|
dot11PowerManagementMode OBJECT-TYPE
|
|
SYNTAX INTEGER { active(1), powersave(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the power management
|
|
mode of the STA. When set to active, it shall indicate
|
|
that the station is not in power-save mode. When set
|
|
to powersave, it shall indicate that the station is
|
|
in power-save mode. The power management mode is
|
|
transmitted in all frames according to the rules
|
|
in 7.1.3.1.7."
|
|
::= { dot11StationConfigEntry 23 }
|
|
|
|
dot11DesiredSSID OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute reflects the Service Set ID used
|
|
in the DesiredSSID parameter of the most recent
|
|
MLME_Scan.request. This value may be modified
|
|
by an external management entity and used by the
|
|
local SME to make decisions about the Scanning process."
|
|
::= { dot11StationConfigEntry 24 }
|
|
|
|
dot11DesiredBSSType OBJECT-TYPE
|
|
SYNTAX INTEGER { infrastructure(1), independent(2), any(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the type of BSS the
|
|
station shall use when scanning for a BSS with which
|
|
to synchronize. This value is used to filter Probe
|
|
Response frames and Beacons. When set to infrastructure,
|
|
the station shall only synchronize with a BSS whose
|
|
Capability Information field has the ESS subfield set
|
|
to 1. When set to independent, the station shall only
|
|
synchronize with a BSS whose Capability Information
|
|
field has the IBSS subfield set to 1. When set to
|
|
any, the station may synchronize to either type of BSS."
|
|
::= { dot11StationConfigEntry 25 }
|
|
|
|
dot11OperationalRateSet OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..126))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the set of data rates
|
|
at which the station may transmit data. Each octet
|
|
contains a value representing a rate. Each rate
|
|
shall be within the range from 2 to 127,
|
|
corresponding to data rates in increments of
|
|
500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be
|
|
supported (as indicated in the supported rates
|
|
table) for receiving data. This value is reported in
|
|
transmitted Beacon, Probe Request, Probe Response,
|
|
Association Request, Association Response,
|
|
Reassociation Request, and Reassociation Response
|
|
frames, and is used to determine whether a BSS
|
|
with which the station desires to synchronize is
|
|
suitable. It is also used when starting a BSS,
|
|
as specified in 10.3."
|
|
::= { dot11StationConfigEntry 26 }
|
|
|
|
dot11BeaconPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of TU that a
|
|
station shall use for scheduling Beacon transmissions.
|
|
This value is transmitted in Beacon and Probe Response
|
|
frames."
|
|
::= { dot11StationConfigEntry 27 }
|
|
|
|
dot11DTIMPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER(1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of beacon
|
|
intervals that shall elapse between transmission of
|
|
Beacons frames containing a TIM element whose DTIM
|
|
Count field is 0. This value is transmitted in
|
|
the DTIM Period field of Beacon frames."
|
|
::= { dot11StationConfigEntry 28 }
|
|
|
|
dot11AssociationResponseTimeOut OBJECT-TYPE
|
|
-- SYNTAX INTEGER(1..4294967295)
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of TU that a
|
|
requesting STA should wait for a response to a
|
|
transmitted association-request MMPDU."
|
|
::= { dot11StationConfigEntry 29 }
|
|
|
|
dot11DisassociateReason OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the most recently transmitted Reason
|
|
Code in a Disassociation frame. If no Disassociation frame
|
|
has been transmitted, the value of this attribute shall be 0."
|
|
-- REFERENCE "IEEE Std 802.11-1997, 7.3.1.7"
|
|
::= { dot11StationConfigEntry 30 }
|
|
|
|
dot11DisassociateStation OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the MAC address from the Address 1 field
|
|
of the most recently transmitted Disassociation frame. If no
|
|
Disassociation frame has been transmitted, the value of this
|
|
attribute shall be 0."
|
|
::= { dot11StationConfigEntry 31 }
|
|
|
|
dot11DeauthenticateReason OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the most recently transmitted Reason
|
|
Code in a Deauthentication frame. If no Deauthentication
|
|
frame has been transmitted, the value of this attribute shall be 0."
|
|
-- REFERENCE "IEEE Std 802.11-1997, 7.3.1.7"
|
|
::= { dot11StationConfigEntry 32 }
|
|
|
|
dot11DeauthenticateStation OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the MAC address from the Address 1 field
|
|
of the most recently transmitted Deauthentication frame. If no
|
|
Deauthentication frame has been transmitted, the value of this
|
|
attribute shall be 0."
|
|
::= { dot11StationConfigEntry 33 }
|
|
|
|
dot11AuthenticateFailStatus OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the most recently transmitted Status
|
|
Code in a failed Authentication frame. If no failed
|
|
Athentication frame has been transmitted, the value of this
|
|
attribute shall be 0."
|
|
-- REFERENCE "IEEE Std 802.11-1997, 7.3.1.9"
|
|
::= { dot11StationConfigEntry 34 }
|
|
|
|
dot11AuthenticateFailStation OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute holds the MAC address from the Address 1 field
|
|
of the most recently transmitted failed Authentication frame.
|
|
If no failed Authentication frame has been transmitted, the
|
|
value of this attribute shall be 0."
|
|
::= { dot11StationConfigEntry 35 }
|
|
|
|
dot11MultiDomainCapabilityImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the station implementation is capable of supporting multiple re gulatory domains. The capability is
|
|
disabled, otherwise. The default value of this attribute is FALSE."
|
|
::= { dot11StationConfigEntry 36 }
|
|
|
|
dot11MultiDomainCapabilityEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute, when TRUE, indicates that the capability of the station to
|
|
operate in multiple regulatory domains is enabled. The capability is
|
|
disabled, otherwise. The default value of this attribute is FALSE."
|
|
::= { dot11StationConfigEntry 37 }
|
|
|
|
dot11CountryString OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute identifies the country in which the station is operating.
|
|
The first two octets if this string is the two character country code as
|
|
described in document ISO/IEC 3166-1. The third octet shall be one of the
|
|
following:
|
|
1. an ASCII space character, if the regulations under which the
|
|
station is operating encompass all environments in the country,
|
|
2. an ASCII Ocharacter, if the regulations under which the
|
|
station is operating are for an Outdoor environment only, or
|
|
3. an ASCII Icharacter, if the regulations under which the
|
|
station is operating are for an Indoor environment only."
|
|
::= { dot11StationConfigEntry 38 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- the dot11GASAdvertisementTable group
|
|
-- -------------------------------------------------------------
|
|
|
|
dot11GASAdvertisementTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot11GASAdvertisementEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a table of GAS counters that allows for
|
|
multiple instantiations of those counters on an STA."
|
|
::= { dot11GASAdvertisement 1 }
|
|
|
|
dot11GASAdvertisementEntry OBJECT-TYPE
|
|
SYNTAX Dot11GASAdvertisementEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the attributes identifying a GAS counter within an STA."
|
|
INDEX { dot11GASAdvertisementId }
|
|
::= { dot11GASAdvertisementTable 1 }
|
|
|
|
Dot11GASAdvertisementEntry ::=
|
|
SEQUENCE {
|
|
dot11GASAdvertisementId INTEGER,
|
|
dot11GASPauseForServerResponse TruthValue,
|
|
dot11GASResponseTimeout INTEGER,
|
|
dot11GASComebackDelay INTEGER,
|
|
dot11GASResponseBufferingTime INTEGER,
|
|
dot11GASQueryResponseLengthLimit INTEGER,
|
|
dot11GASQueries Counter32,
|
|
dot11GASQueryRate Unsigned32,
|
|
dot11GASResponses Counter32,
|
|
dot11GASResponseRate Unsigned32,
|
|
dot11GASTransmittedFragmentCount Counter32,
|
|
dot11GASReceivedFragmentCount Counter32,
|
|
dot11GASNoRequestOutstanding Counter32,
|
|
dot11GASResponsesDiscarded Counter32,
|
|
dot11GASFailedResponses Counter32
|
|
}
|
|
|
|
-- HS Group
|
|
-- This group defines objects for DOT11 and DOT11u.
|
|
|
|
|
|
dot11GASAdvertisementId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable.
|
|
It is written by an external management entity or the SME.
|
|
Changes take effect as soon as practical in the implementation.
|
|
The one octet identification number for the GAS Advertisement
|
|
Protocol, as defined in Table7-43bi, for which statistics are
|
|
stored the logical row of the GASAdvertisement table."
|
|
::= { dot11GASAdvertisementEntry 1 }
|
|
|
|
|
|
dot11GASPauseForServerResponse OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable.
|
|
It is written by an external management entity or the SME.
|
|
Changes take effect as soon as practical in the implementation.
|
|
This attribute is only used by the responding STA in a GAS
|
|
exchange. When true, it indicates that the responding STA will
|
|
not transmit a GAS Initial Response frame until it receives the
|
|
query response from the Advertisement Server or a timeout
|
|
occurs. When false, the STA will not wait for a response from
|
|
the Advertisement Server before transmiting the GAS Initial
|
|
Response frame."
|
|
DEFVAL {false}
|
|
::= { dot11GASAdvertisementEntry 2 }
|
|
|
|
|
|
dot11GASResponseTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1000..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable.
|
|
It is written by an external management entity or the SME.
|
|
Changes take effect as soon as practical in the implementation.
|
|
This parameter shall indicate the GAS response timeout value in
|
|
TUs."
|
|
DEFVAL {5000}
|
|
::= { dot11GASAdvertisementEntry 3 }
|
|
|
|
|
|
dot11GASComebackDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable.
|
|
It is written by an external management entity or the SME.
|
|
Changes take effect as soon as practical in the implementation.
|
|
This object identifies the GAS Comeback Delay (in TUs) to be
|
|
used for this Advertisement Protocol"
|
|
DEFVAL {1000}
|
|
::= { dot11GASAdvertisementEntry 4 }
|
|
|
|
|
|
dot11GASResponseBufferingTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable.
|
|
It is written by an external management entity or the SME.
|
|
Changes take effect as soon as practical in the implementation.
|
|
This object defines the time duration after the expiry of the
|
|
GAS Comeback Delay that an STA will buffer a Query Response.
|
|
The units of this MIB object are TUs. Upon expiry of this time,
|
|
the STA may discard the Query Response."
|
|
DEFVAL {1000}
|
|
::= { dot11GASAdvertisementEntry 5 }
|
|
|
|
|
|
dot11GASQueryResponseLengthLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a control variable.
|
|
It is written by an external management entity or the SME.
|
|
Changes take effect as soon as practical in the implementation.
|
|
This object indicates the maximum number of octets an AP will
|
|
transmit in one or more Query Response fields contained within
|
|
GAS Comeback Response frame(s). A value of 127 means the
|
|
maximum limit enforced is contained by the maximum allowable
|
|
number of fragments in the GAS Query Fragment Response ID"
|
|
::= { dot11GASAdvertisementEntry 6 }
|
|
|
|
|
|
dot11GASQueries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status variable.
|
|
It is written by the SME after transmission of a MLME-
|
|
GAS.request or MLME-PDGAS.request or receipt of an MLME-
|
|
GAS.indication or MLME-PDGAS.indication primitive.
|
|
The number of GAS queries sent or received for the protocol
|
|
identified by dot11GASAdvertisementId."
|
|
::= { dot11GASAdvertisementEntry 7 }
|
|
|
|
|
|
dot11GASQueryRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status variable.
|
|
It is updated by the SME after receipt of an MLME-
|
|
GAS.indication or MLME-PDGAS.indication primitive.
|
|
The number of GAS queries per minute received for the protocol
|
|
identified by dot11GASAdvertisementId, averaged over the
|
|
previous ten minutes."
|
|
::= { dot11GASAdvertisementEntry 8 }
|
|
|
|
|
|
dot11GASResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status variable.
|
|
It is written by the SME after transmission of a MLME-
|
|
GAS.response or MLME-PDGAS.response or receipt of an MLME-
|
|
GAS.confirm or MLME-PDGAS.confirm primitive.
|
|
The number of GAS responses sent or received for the protocol
|
|
identified by dot11GASAdvertisementId."
|
|
::= { dot11GASAdvertisementEntry 9 }
|
|
|
|
|
|
dot11GASResponseRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status variable.
|
|
It is updated by the SME after transmission of an MLME-
|
|
GAS.response or MLME-PDGAS.response primitive.
|
|
The number of responses to GAS queries per minute transmitted
|
|
by an AP for the protocol identified by dot11GASAdvertisementId,
|
|
averaged over the previous ten
|
|
minutes. This MIB variable is not used in non-AP STAs."
|
|
::= { dot11GASAdvertisementEntry 10 }
|
|
|
|
|
|
dot11GASTransmittedFragmentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status variable.
|
|
It is updated by the SME after transmission of an MLME-
|
|
GAS.response or MLME-PDGAS.response primitive.
|
|
This counter shall be incremented for an acknowledged GAS MMPDU
|
|
for the protocol identified by dot11GASAdvertisementId."
|
|
::= { dot11GASAdvertisementEntry 11 }
|
|
|
|
|
|
dot11GASReceivedFragmentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status variable.
|
|
It is updated by the MAC after transmission of an MLME-
|
|
GAS.confirm or MLME-PDGAS.confirm primitive.
|
|
This counter shall be incremented for each successfully
|
|
received MMPDU of type Data"
|
|
::= { dot11GASAdvertisementEntry 12 }
|
|
|
|
|
|
dot11GASNoRequestOutstanding OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status variable.
|
|
It is updated by the SME after transmission of an MLME-GAS.response
|
|
or MLME-PDGAS.response primitive.
|
|
This counter shall be incremented each time a STA returns a status
|
|
code of no request outstanding in a GAS Initial Response or GAS
|
|
Comeback Response frame for the protocol identified by
|
|
dot11GASAdvertisementId."
|
|
::= { dot11GASAdvertisementEntry 13 }
|
|
|
|
|
|
dot11GASResponsesDiscarded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status variable.
|
|
It is updated by the SME after transmission of an MLME-GAS.response
|
|
or MLME-PDGAS.response primitive.
|
|
This counter shall be incremented each a STA discards a GAS
|
|
response due to the expiry of the dot11GASResponseBufferingTime
|
|
timer for the protocol identified by dot11GASAdvertisementId."
|
|
::= { dot11GASAdvertisementEntry 14 }
|
|
|
|
|
|
dot11GASFailedResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status variable.
|
|
It is updated by the SME after transmission of an MLME-GAS.response
|
|
or MLME-PDGAS.response primitive.
|
|
This counter shall be incremented each time a STA commences
|
|
transmitting a GAS response but fails to successfully complete the
|
|
transmission of all GAS fragments in that response due to the expiry of the dot11GASResponseTimeout timer for the protocol
|
|
identified by dot11GASAdvertisementId."
|
|
::= { dot11GASAdvertisementEntry 15 }
|
|
|
|
|
|
END
|