WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/pandacom/SPEED-DUALLINE-10G

1385 lines
35 KiB
Plaintext
Raw Permalink Blame History

SPEED-DUALLINE-10G DEFINITIONS ::= BEGIN
--*****************************************************************************************
--***** Version History ***************************************************************
--=========================================================================================
--V0.0 11.02.2011 ML: Erste Version SPEED-DUALLINE-10G
--Supported Modules:
--
--*****************************************************************************************
IMPORTS
DisplayString FROM RFC1213-MIB
OBJECT-TYPE FROM RFC-1212
TRAP-TYPE FROM RFC-1215
enterprises, IpAddress, TimeTicks, MODULE-IDENTITY FROM SNMPv2-SMI
PanDacom FROM PanDacom-MIB
nmSPEEDCARRIER, converter FROM SPEEDCARRIER-MIB
; -- END of IMPORTS
--*******************************************************************
speedDualline10G MODULE-IDENTITY
LAST-UPDATED "1312120000Z"
ORGANIZATION "Pan Dacom Direkt GmbH"
CONTACT-INFO
"Pan Dacom Direkt GmbH
Dreieich Plaza 1B
63303 Dreieich
Germany
Tel. : +49 6103/83483-333
Fax. : +49 6103/83483-444
email: kontakt@pandacomdirekt.de
web : www.pandacomdirekt.de"
DESCRIPTION "Revision 1.0"
REVISION "1312120000Z"
DESCRIPTION "Revision 5.2.0
- this Dualline10G mib is obsolete and supported in the
DuallineFC tree.
- change of table indexes
- corrective actions "
::= { converter 4 }
--*******************************************************************
speedDualline10GMOverviewTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedDualline10GMOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Speed-Dualline 10G Module Overview table"
::= { speedDualline10G 1 }
speedDualline10GMOverviewEntry OBJECT-TYPE
SYNTAX SpeedDualline10GMOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module Overview entries"
INDEX { speedDualline10GMSlot }
::= { speedDualline10GMOverviewTable 1 }
SpeedDualline10GMOverviewEntry ::=
SEQUENCE
{
speedDualline10GMSlot INTEGER,
speedDualline10GMDevice INTEGER,
speedDualline10GMState INTEGER,
speedDualline10GMSysName DisplayString,
speedDualline10GMSysUpTime TimeTicks,
speedDualline10GMTemperature INTEGER,
speedDualline10GMAlarmState INTEGER,
speedDualline10GMKernelImage DisplayString,
speedDualline10GMAppImage DisplayString,
speedDualline10GMHwVersion DisplayString,
speedDualline10GMSerialNumber DisplayString,
speedDualline10GMEthPortState INTEGER,
speedDualline10GMUploadState INTEGER,
speedDualline10GMUpdateState INTEGER
}
speedDualline10GMSlot OBJECT-TYPE
SYNTAX INTEGER (1..17)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot number"
::= { speedDualline10GMOverviewEntry 2 }
speedDualline10GMDevice OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
speedDualline10GXFP(8),
speedDualline10GSFP(9),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"device type"
::= { speedDualline10GMOverviewEntry 3 }
speedDualline10GMState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
running(1),
resetSoftware(2),
resetConfig(3),
resetCAN(4),
resetHardware(5),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device oper state. If setting resetConfig, you also have to reset the hardware."
::= { speedDualline10GMOverviewEntry 4 }
speedDualline10GMSysName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Modules name or description"
::= { speedDualline10GMOverviewEntry 5 }
speedDualline10GMSysUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System Up Time in Seconds"
::= { speedDualline10GMOverviewEntry 6 }
speedDualline10GMTemperature OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Board temperature"
::= { speedDualline10GMOverviewEntry 7 }
speedDualline10GMAlarmState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
noAlarm(1),
activeAlarms(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"global device alarm state"
::= { speedDualline10GMOverviewEntry 8 }
speedDualline10GMKernelImage OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"kernel version"
::= { speedDualline10GMOverviewEntry 9 }
speedDualline10GMAppImage OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"software version"
::= { speedDualline10GMOverviewEntry 10 }
speedDualline10GMHwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"board hardware version"
::= { speedDualline10GMOverviewEntry 11 }
speedDualline10GMSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"board serial number"
::= { speedDualline10GMOverviewEntry 12 }
speedDualline10GMEthPortState OBJECT-TYPE
SYNTAX INTEGER
{
notavailable(0),
linkDown(1),
hdx10(2),
fdx10(3),
hdx100(4),
fdx100(5),
off(6),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ethernet Port State (copper management port)"
::= { speedDualline10GMOverviewEntry 13 }
speedDualline10GMUploadState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
ready(1),
startUpload(2),
uploadActive(3),
uploadFailure(4),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"software update state"
::= { speedDualline10GMOverviewEntry 14 }
speedDualline10GMUpdateState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
idle(1),
activateKernel (2),
activateApplication (3),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"software update state"
::= { speedDualline10GMOverviewEntry 15 }
-- *********************************
speedDualline10GMConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedDualline10GMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Speed-Dualline 10G module config table"
::= { speedDualline10G 2 }
speedDualline10GMConfigEntry OBJECT-TYPE
SYNTAX SpeedDualline10GMConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module config entries"
INDEX { speedDualline10GMSlot }
::= { speedDualline10GMConfigTable 1 }
SpeedDualline10GMConfigEntry ::=
SEQUENCE
{
-- speedDualline10GMIndex INTEGER,
speedDualline10GMSlot INTEGER,
speedDualline10GMIpAddress IpAddress,
speedDualline10GMIpNetmask IpAddress,
speedDualline10GMIpGateway IpAddress,
speedDualline10GMTrapSink1 IpAddress,
speedDualline10GMTrapSink2 IpAddress,
speedDualline10GMTrapSink3 IpAddress,
speedDualline10GMTrapSink4 IpAddress,
speedDualline10GMTrapSink5 IpAddress,
speedDualline10GMSNMPReadCommunity DisplayString,
speedDualline10GMSNMPWriteCommunity DisplayString,
speedDualline10GMTempWarningLevel INTEGER,
speedDualline10GMTempAlarmLevel INTEGER,
speedDualline10GMSNMPSyscontact DisplayString,
speedDualline10GMSNMPSyslocation DisplayString,
speedDualline10GMPortTxConnection INTEGER,
speedDualline10GMUserTimeout INTEGER,
speedDualline10GMEthPortMode INTEGER,
speedDualline10GMAccess INTEGER
}
speedDualline10GMIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"device IP-address"
DEFVAL { 'c0a80066'H } -- 192.168.0.102
::= { speedDualline10GMConfigEntry 3 }
speedDualline10GMIpNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"device IP-mask"
DEFVAL { 'ffffff00'H } -- 255.255.255.0
::= { speedDualline10GMConfigEntry 4 }
speedDualline10GMIpGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"device default gateway"
::= { speedDualline10GMConfigEntry 5 }
speedDualline10GMTrapSink1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"snmp trapsink 1"
::= { speedDualline10GMConfigEntry 6 }
speedDualline10GMTrapSink2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"snmp trapsink 2"
::= { speedDualline10GMConfigEntry 7 }
speedDualline10GMTrapSink3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"snmp trapsink 3"
::= { speedDualline10GMConfigEntry 8 }
speedDualline10GMTrapSink4 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"snmp trapsink 4"
::= { speedDualline10GMConfigEntry 9 }
speedDualline10GMTrapSink5 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"snmp trapsink 5"
::= { speedDualline10GMConfigEntry 10 }
speedDualline10GMSNMPReadCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"snmp read community"
::= { speedDualline10GMConfigEntry 11 }
speedDualline10GMSNMPWriteCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"snmp write community"
::= { speedDualline10GMConfigEntry 12 }
speedDualline10GMTempWarningLevel OBJECT-TYPE
SYNTAX INTEGER (5..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"high temperature warning level"
::= { speedDualline10GMConfigEntry 13 }
speedDualline10GMTempAlarmLevel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"high temperature alarm level"
::= { speedDualline10GMConfigEntry 14 }
speedDualline10GMSNMPSyscontact OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"snmp syscontact"
::= { speedDualline10GMConfigEntry 15 }
speedDualline10GMSNMPSyslocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"snmp syslocation"
::= { speedDualline10GMConfigEntry 16 }
speedDualline10GMPortTxConnection OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
connect1to3and2to4(1),
connect1to4and2to3(2),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port tx connection"
::= { speedDualline10GMConfigEntry 17 }
speedDualline10GMUserTimeout OBJECT-TYPE
SYNTAX INTEGER (120..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CLI user timeout. Valid from 120 to 3600 seconds."
::= { speedDualline10GMConfigEntry 18 }
speedDualline10GMEthPortMode OBJECT-TYPE
SYNTAX INTEGER
{
notavailable(0),
autoneg(1),
hdx10(2),
fdx10(3),
hdx100(4),
fdx100(5),
off(6),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Admin config for Ethernet port on 10G card."
::= { speedDualline10GMConfigEntry 19 }
speedDualline10GMAccess OBJECT-TYPE
SYNTAX INTEGER
{
notavailable(0),
off(1),
telnet(2),
ssh2(3),
notImplemented(254),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"command line access method to this system"
::= { speedDualline10GMConfigEntry 20 }
-- speedDualline10GMSNMPAgent OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- notAvailable(0),
-- off(1),
-- on(2),
-- notImplemented(254),
-- unknown(255)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Admin config of SNMP agend"
-- ::= { speedDualline10GMConfigEntry 21 }
-- speedDualline10GMHTTPAgent OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- notAvailable(0),
-- off(1),
-- on(2),
-- notImplemented(254),
-- unknown(255)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Admin config of HTTP agend"
-- ::= { speedDualline10GMConfigEntry 22 }
-- *********************************
speedDualline10GMProtectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedDualline10GMProtectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Speed-Dualline 10G module Protection table"
::= { speedDualline10G 3 }
speedDualline10GMProtectionEntry OBJECT-TYPE
SYNTAX SpeedDualline10GMProtectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module Protection entries"
INDEX { speedDualline10GMSlot }
::= { speedDualline10GMProtectionTable 1 }
SpeedDualline10GMProtectionEntry ::=
SEQUENCE
{
-- speedDualline10GMIndex INTEGER,
speedDualline10GMSlot INTEGER,
speedDualline10GMLinkProtectionConfig INTEGER,
speedDualline10GMLinkProtectionState INTEGER,
speedDualline10GMLinkProtectionFallbackTime INTEGER,
speedDualline10GMLinkProtectionRXLevelPort1 INTEGER,
speedDualline10GMLinkProtectionRXLevelPort2 INTEGER,
speedDualline10GMLinkProtectionClientPort INTEGER,
speedDualline10GMLinkProtectionMode INTEGER
}
speedDualline10GMLinkProtectionConfig OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
protectionOFF(1),
protectionOn(2),
notAvailable(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable/disable the link protection"
::= { speedDualline10GMProtectionEntry 3 }
speedDualline10GMLinkProtectionState OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
port1active(1),
port2active(2),
testingPort1(3),
testingPort2(4),
noneActive(5),
notAvailable(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"link protection state"
::= { speedDualline10GMProtectionEntry 4 }
speedDualline10GMLinkProtectionFallbackTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"fallback time to main link. Min 5 sec. to max 3600 seconds."
::= { speedDualline10GMProtectionEntry 5 }
speedDualline10GMLinkProtectionRXLevelPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"min RX-power level for switch over"
::= { speedDualline10GMProtectionEntry 6 }
speedDualline10GMLinkProtectionRXLevelPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"min RX-power level for switch over"
::= { speedDualline10GMProtectionEntry 7 }
speedDualline10GMLinkProtectionClientPort OBJECT-TYPE
SYNTAX INTEGER
{
notavailable(0),
port3(1),
port4(2),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"choose prefered client port"
::= { speedDualline10GMProtectionEntry 8 }
speedDualline10GMLinkProtectionMode OBJECT-TYPE
SYNTAX INTEGER
{
notavailable(0),
fallbackPort1(1),
fallbackPort2(2),
staticPort1(3),
staticPort2(4),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"protection working mode"
::= { speedDualline10GMProtectionEntry 9 }
-- *********************************
speedDualline10GPortOverviewTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedDualline10GPortOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Speed-Dualline 10G port overview table"
::= { speedDualline10G 4 }
speedDualline10GPortOverviewEntry OBJECT-TYPE
SYNTAX SpeedDualline10GPortOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module port overview entries"
INDEX { speedDualline10GPortIndex }
::= { speedDualline10GPortOverviewTable 1 }
SpeedDualline10GPortOverviewEntry ::=
SEQUENCE
{
speedDualline10GPortIndex INTEGER,
speedDualline10GPortSlot INTEGER,
speedDualline10GPortPort INTEGER,
speedDualline10GPortDescription DisplayString,
speedDualline10GPortAdminConfig INTEGER,
speedDualline10GPortOperState INTEGER,
speedDualline10GPortXCVState INTEGER,
speedDualline10GPortLLCFconfig INTEGER,
speedDualline10GPortLoopConfig INTEGER,
speedDualline10GPortSpeedConfig INTEGER,
speedDualline10GPortAlarmState INTEGER,
speedDualline10GPortAlarmDeactivation INTEGER,
speedDualline10GPortAlarmSchedule INTEGER
}
speedDualline10GPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..1900)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Index"
::= { speedDualline10GPortOverviewEntry 1 }
speedDualline10GPortSlot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot number"
::= { speedDualline10GPortOverviewEntry 2 }
speedDualline10GPortPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port number"
::= { speedDualline10GPortOverviewEntry 3 }
speedDualline10GPortDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port description"
::= { speedDualline10GPortOverviewEntry 4 }
speedDualline10GPortAdminConfig OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
adminDown(1),
adminUp(2),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port admin config"
::= { speedDualline10GPortOverviewEntry 5 }
speedDualline10GPortOperState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
down(1),
up(2),
loop(3),
downLLCF(4),
downTxFault(5),
downRxLevel(6),
downTxLevel(7),
bertRunnung(8),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port operational state"
::= { speedDualline10GPortOverviewEntry 6 }
speedDualline10GPortXCVState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
xcvRemoved(1),
xcvInstalled(2),
xcvTxFault(3),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver installation state"
::= { speedDualline10GPortOverviewEntry 7 }
speedDualline10GPortLLCFconfig OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
off(1),
on(2),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port link loss cary forward config"
::= { speedDualline10GPortOverviewEntry 8 }
speedDualline10GPortLoopConfig OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
off(1),
on(2),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port loop config"
::= { speedDualline10GPortOverviewEntry 9 }
speedDualline10GPortSpeedConfig OBJECT-TYPE
SYNTAX INTEGER
{
speed10G(0),
notAvailable(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port 3R speed in kbit/s"
::= { speedDualline10GPortOverviewEntry 10 }
speedDualline10GPortAlarmState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
noAlarms(1),
activeAlarms(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port alarm state"
::= { speedDualline10GPortOverviewEntry 11 }
speedDualline10GPortAlarmDeactivation OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
alarmReportingEnabled(1),
alarmReportingDisabledbySchedule(2),
alarmReportingDisabledPermanent(3),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port alarm deactivation schedule"
::= { speedDualline10GPortOverviewEntry 12 }
speedDualline10GPortAlarmSchedule OBJECT-TYPE
SYNTAX INTEGER (0..1200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port alarm deactivation schedule. Value in hours. After this time has elapsed, the alarms are active again. Valid range: 1..1200. 0 means less then 1 hour"
::= { speedDualline10GPortOverviewEntry 13 }
-- *********************************
speedDualline10GXCVOverviewTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedDualline10GXCVOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Speed-Dualline 10G transceiver overview table"
::= { speedDualline10G 5 }
speedDualline10GXCVOverviewEntry OBJECT-TYPE
SYNTAX SpeedDualline10GXCVOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module transceiver overview entries"
INDEX { speedDualline10GPortIndex }
::= { speedDualline10GXCVOverviewTable 1 }
SpeedDualline10GXCVOverviewEntry ::=
SEQUENCE
{
speedDualline10GPortIndex INTEGER,
speedDualline10GPortSlot INTEGER,
speedDualline10GPortPort INTEGER,
speedDualline10GPortXCVVendorName DisplayString,
speedDualline10GPortXCVVendorPartNumber DisplayString,
speedDualline10GPortXCVVendorSerialNumber DisplayString,
speedDualline10GPortXCVType INTEGER,
speedDualline10GPortXCVConnector INTEGER,
speedDualline10GPortXCVWavelength INTEGER,
speedDualline10GPortXCVDMIState INTEGER
}
speedDualline10GPortXCVVendorName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver vendor name"
::= { speedDualline10GXCVOverviewEntry 4 }
speedDualline10GPortXCVVendorPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver part number"
::= { speedDualline10GXCVOverviewEntry 5 }
speedDualline10GPortXCVVendorSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver serial number"
::= { speedDualline10GXCVOverviewEntry 6 }
speedDualline10GPortXCVType OBJECT-TYPE
SYNTAX INTEGER
{
unspecified(0),
tGBIC(1),
tModuleSolderedToMotherboard(2),
tSFPTransceiver(3),
t300PinXBI(4),
tXENPAK(5),
tXFP(6),
tXFF(7),
tXFP-E(8),
tXPAK(9),
tX2(10),
tDWDMSFPTransceiver(11),
tCopperSFPTransceiver(254),
vendorSpecific(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver type"
::= { speedDualline10GXCVOverviewEntry 7 }
speedDualline10GPortXCVConnector OBJECT-TYPE
SYNTAX INTEGER
{
unspecified(0),
cSC(1),
cFibreChannelStyle1CopperConnector(2),
cFibreChannelStyle2CopperConnector(3),
cBncTnc(4),
cFibreChannerCoaxialHeader(5),
cFibreJack(6),
cLC(7),
cMTRJ(8),
cMU(9),
cSG(10),
cOpticalPigtail(11),
cHSSDCII(32),
cCopperPigtail(33),
cRJ45(34),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver connector"
::= { speedDualline10GXCVOverviewEntry 8 }
speedDualline10GPortXCVWavelength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver supported wavelength (value * 100)"
::= { speedDualline10GXCVOverviewEntry 9 }
speedDualline10GPortXCVDMIState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
sff8472V93(1),
sff8472V95(2),
sff8472V102(3),
sff8472V104(4),
sff8472V11(5),
dmiAvailable(253),
notImplemented(254),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver DMI compliance"
::= { speedDualline10GXCVOverviewEntry 10 }
-- *********************************
speedDualline10GXCVFeatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedDualline10GXCVFeatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Speed-Dualline 10G transceiver feature table"
::= { speedDualline10G 6 }
speedDualline10GXCVFeatureEntry OBJECT-TYPE
SYNTAX SpeedDualline10GXCVFeatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module transceiver feature entries"
INDEX { speedDualline10GPortIndex }
::= { speedDualline10GXCVFeatureTable 1 }
SpeedDualline10GXCVFeatureEntry ::=
SEQUENCE
{
speedDualline10GPortIndex INTEGER,
speedDualline10GPortSlot INTEGER,
speedDualline10GPortPort INTEGER,
speedDualline10GPortXCVBitrateMax INTEGER,
speedDualline10GPortXCVBitrateMin INTEGER,
speedDualline10GPortXCVLengthSMkm INTEGER,
speedDualline10GPortXCVLength50 INTEGER,
speedDualline10GPortXCVLength62 INTEGER,
speedDualline10GPortXCVLengthCopper INTEGER
}
speedDualline10GPortXCVBitrateMax OBJECT-TYPE
SYNTAX INTEGER
{
unspecified(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper bit rate limit at which the SFP transceiver will still meet its specifications is specified in units of 1 Megabit per second. A value of 0 indicates that this field is not specified."
::= { speedDualline10GXCVFeatureEntry 4 }
speedDualline10GPortXCVBitrateMin OBJECT-TYPE
SYNTAX INTEGER
{
unspecified(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower bit rate limit at which the SFP transceiver will still meet its specifications is specified in units of 1 Megabit per second. A value of 0 indicates that this field is not specified."
::= { speedDualline10GXCVFeatureEntry 5 }
speedDualline10GPortXCVLengthSMkm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value specifies the link length that is supported by the SFP transceiver while operating in compliance with the applicable standards using single mode fiber. The value is in units of kilometers. A value of 255 means that the transceiver supports a link greater than 254 km. A value of 0 means that the transceiver does not support single mode fiber or that the length information must be determined from the transceiver technology."
::= { speedDualline10GXCVFeatureEntry 6 }
speedDualline10GPortXCVLength50 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value specifies the link length that is supported by the SFP transceiver while operating in compliance with the applicable standards using 50 micron OM2 multi mode fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a link greater than 2.54 km. A value of 0 means that the transceiver does not support 50 micron multi mode fiber or that the length information must be determined from the transceiver technology."
::= { speedDualline10GXCVFeatureEntry 7 }
speedDualline10GPortXCVLength62 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value specifies the link length that is supported by the SFP transceiver while operating in compliance with the applicable standards using 62.5 micron multi mode fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a link greater than 2.54 km. A value of 0 means that the transceiver does not support 62.5 micron multi mode fiber or that the length information must be determined from the transceiver technology."
::= { speedDualline10GXCVFeatureEntry 8 }
speedDualline10GPortXCVLengthCopper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value specifies the link length that is supported by the SFP transceiver while operating in compliance with the applicable standards using copper cable. The value is in units of 1 meter. A value of 255 means that the transceiver supports a link greater than 254 m. A value of 0 means that the transceiver does not support copper cable or that the length information must be determined from the transceiver technology. Further information about the cable design, equalization, and connectors is usually required to guarantee meeting of particular length information."
::= { speedDualline10GXCVFeatureEntry 9 }
-- *********************************
speedDualline10GXCVMeassurementTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedDualline10GXCVMeassurementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Speed-Dualline 10G transceiver DMI meassurement table"
::= { speedDualline10G 7 }
speedDualline10GXCVMeassurementEntry OBJECT-TYPE
SYNTAX SpeedDualline10GXCVMeassurementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module transceiver DMI meassurement entries"
INDEX { speedDualline10GPortIndex }
::= { speedDualline10GXCVMeassurementTable 1 }
SpeedDualline10GXCVMeassurementEntry ::=
SEQUENCE
{
speedDualline10GPortIndex INTEGER,
speedDualline10GPortSlot INTEGER,
speedDualline10GPortPort INTEGER,
speedDualline10GPortXCVDMIRxLevel INTEGER,
speedDualline10GPortXCVDMITxLevel INTEGER,
speedDualline10GPortXCVDMITxBias INTEGER,
speedDualline10GPortXCVDMITemp INTEGER
}
speedDualline10GPortXCVDMIRxLevel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"optical receive level (dBm value * 100)"
::= { speedDualline10GXCVMeassurementEntry 4 }
speedDualline10GPortXCVDMITxLevel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"optical transmit level (dBm value * 100)"
::= { speedDualline10GXCVMeassurementEntry 5 }
speedDualline10GPortXCVDMITxBias OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitter TX bias current (mA)"
::= { speedDualline10GXCVMeassurementEntry 6 }
speedDualline10GPortXCVDMITemp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitter temperature (degree Celsius)"
::= { speedDualline10GXCVMeassurementEntry 7 }
-- *********************************
speedDualline10GXCVAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedDualline10GXCVAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Speed-Dualline 10G transceiver alarm table"
::= { speedDualline10G 8 }
speedDualline10GXCVAlarmEntry OBJECT-TYPE
SYNTAX SpeedDualline10GXCVAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module transceiver alarm entries"
INDEX { speedDualline10GPortIndex }
::= { speedDualline10GXCVAlarmTable 1 }
SpeedDualline10GXCVAlarmEntry ::=
SEQUENCE
{
speedDualline10GPortIndex INTEGER,
speedDualline10GPortSlot INTEGER,
speedDualline10GPortPort INTEGER,
speedDualline10GPortXCVDMIRxPowerAlarm INTEGER,
speedDualline10GPortXCVDMITxLowAlarm INTEGER,
speedDualline10GPortXCVDMIBiasAlarmEvent INTEGER,
speedDualline10GPortXCVDWDMLaserTempAlarmEvent INTEGER,
speedDualline10GPortXCVDWDMTECAlarmEvent INTEGER,
speedDualline10GPortXCVTempHighAlarm INTEGER,
speedDualline10GPortXCVCDRALARM INTEGER
}
speedDualline10GPortXCVDMIRxPowerAlarm OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable(0),
noAlarm(1),
rxLowWarning(2),
rxLowAlarm(3),
rxHighAlarm(4),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver RX power event"
::= { speedDualline10GXCVAlarmEntry 4 }
speedDualline10GPortXCVDMITxLowAlarm OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
noAlarm(1),
activeAlarms(2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver TX power event"
::= { speedDualline10GXCVAlarmEntry 5 }
speedDualline10GPortXCVDMIBiasAlarmEvent OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
noAlarm(1),
activeAlarms(2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver bias current event"
::= { speedDualline10GXCVAlarmEntry 6 }
speedDualline10GPortXCVDWDMLaserTempAlarmEvent OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable (0),
noAlarm (1),
lowAlarm (2),
highAlarm(3),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver DWDM laser temperature event"
::= { speedDualline10GXCVAlarmEntry 7 }
speedDualline10GPortXCVDWDMTECAlarmEvent OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
noAlarm(1),
activeAlarms(2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver DWDM TEC event"
::= { speedDualline10GXCVAlarmEntry 8 }
speedDualline10GPortXCVTempHighAlarm OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable(0),
noAlarm(1),
highWarning(2),
highAlarm(3),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver temperature Event"
::= { speedDualline10GXCVAlarmEntry 9 }
speedDualline10GPortXCVCDRALARM OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable(0),
noAlarm(1),
activeAlarm(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"clock data recovery Event"
::= { speedDualline10GXCVAlarmEntry 10 }
-- *********************************
speedDualline10GMBoardAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedDualline10GMBoardAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Speed-Dualline 10G module board alarm table"
::= { speedDualline10G 9 }
speedDualline10GMBoardAlarmEntry OBJECT-TYPE
SYNTAX SpeedDualline10GMBoardAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module board alarm entries"
INDEX { speedDualline10GMSlot }
::= { speedDualline10GMBoardAlarmTable 1 }
SpeedDualline10GMBoardAlarmEntry ::=
SEQUENCE
{
-- speedDualline10GMIndex INTEGER,
speedDualline10GMSlot INTEGER,
speedDualline10GMBoardTempAlarm INTEGER
}
speedDualline10GMBoardTempAlarm OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable(0),
noAlarm(1),
highWarning(2),
highAlarm(3),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"board temperature Event"
::= { speedDualline10GMBoardAlarmEntry 3 }
-- *********************************
speedDualline10GXCVTunableTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedDualline10GXCVTunableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Speed-Dualline tunable transceiver table"
::= { speedDualline10G 10 }
speedDualline10GXCVTunableEntry OBJECT-TYPE
SYNTAX SpeedDualline10GXCVTunableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"transceiver tunable entries"
INDEX { speedDualline10GPortIndex }
::= { speedDualline10GXCVTunableTable 1 }
SpeedDualline10GXCVTunableEntry ::=
SEQUENCE
{
speedDualline10GPortIndex INTEGER,
speedDualline10GPortSlot INTEGER,
speedDualline10GPortPort INTEGER,
speedDualline10GPortXCVChannelSpacing INTEGER,
speedDualline10GPortXCVNumberOfChannels INTEGER,
speedDualline10GPortXCVCenterWavlength INTEGER,
speedDualline10GPortXCVLaserWavelengthTolerance INTEGER,
speedDualline10GPortXCVTunableFeature INTEGER,
speedDualline10GPortXCVTunableMinMaxChannel DisplayString,
speedDualline10GPortXCVTunableWavelengthConfig INTEGER,
speedDualline10GPortXCVTunableChannelConfig DisplayString,
speedDualline10GPortXCVTunableConfigSelection INTEGER
}
speedDualline10GPortXCVChannelSpacing OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"XCV channel spacing"
::= { speedDualline10GXCVTunableEntry 4 }
speedDualline10GPortXCVNumberOfChannels OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"XCV supported number channels"
::= { speedDualline10GXCVTunableEntry 5 }
speedDualline10GPortXCVCenterWavlength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"XCV center wavelength"
::= { speedDualline10GXCVTunableEntry 6 }
speedDualline10GPortXCVLaserWavelengthTolerance OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"XCV wavelength tolerance / tunable range"
::= { speedDualline10GXCVTunableEntry 7 }
speedDualline10GPortXCVTunableFeature OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable (0),
notTunable (1),
byWavelength (2),
byChannel (4),
byChannelAndWavelength (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"is transceiver tunable?"
::= { speedDualline10GXCVTunableEntry 8 }
speedDualline10GPortXCVTunableMinMaxChannel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set parameter for transceiver channel config. "
::= { speedDualline10GXCVTunableEntry 9 }
speedDualline10GPortXCVTunableWavelengthConfig OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"XCV wavelength control. Wavelength value in units of pm!"
::= { speedDualline10GXCVTunableEntry 10 }
speedDualline10GPortXCVTunableChannelConfig OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set parameter for transceiver channel config. "
::= { speedDualline10GXCVTunableEntry 11 }
speedDualline10GPortXCVTunableConfigSelection OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable(0),
xcvInternal(1),
configFile(2),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"selects which config should be used (internal XCV or transponder card config)"
::= { speedDualline10GXCVTunableEntry 12 }
END
View Git Blame Copy Permalink