SPEED-DUALLINE-10G DEFINITIONS ::= BEGIN

--*****************************************************************************************
--*****   Version History   ***************************************************************
--=========================================================================================

--V0.0  11.02.2011 ML: Erste Version SPEED-DUALLINE-10G
--Supported Modules:
--
--*****************************************************************************************

IMPORTS
	DisplayString	FROM RFC1213-MIB
	OBJECT-TYPE	FROM RFC-1212
	TRAP-TYPE	FROM RFC-1215
	enterprises, IpAddress, TimeTicks, MODULE-IDENTITY	FROM SNMPv2-SMI
	PanDacom	FROM PanDacom-MIB
	nmSPEEDCARRIER, converter	FROM SPEEDCARRIER-MIB
; -- END of IMPORTS

--*******************************************************************

	speedDualline10G MODULE-IDENTITY
		LAST-UPDATED "1312120000Z"
		ORGANIZATION "Pan Dacom Direkt GmbH"
		CONTACT-INFO
			"Pan Dacom Direkt GmbH
			Dreieich Plaza 1B
			63303 Dreieich
			Germany
			Tel. : +49 6103/83483-333
			Fax. : +49 6103/83483-444
			email: kontakt@pandacomdirekt.de
			web  : www.pandacomdirekt.de"
		DESCRIPTION "Revision 1.0"

		REVISION "1312120000Z"
		DESCRIPTION "Revision 5.2.0
			- this Dualline10G mib is obsolete and supported in the
			DuallineFC tree.
			- change of table indexes
			- corrective actions "

		::= { converter 4 }

--*******************************************************************

	speedDualline10GMOverviewTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDualline10GMOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline 10G Module Overview table"
		::= { speedDualline10G 1 }

	speedDualline10GMOverviewEntry OBJECT-TYPE
		SYNTAX SpeedDualline10GMOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module Overview entries"
		INDEX { speedDualline10GMSlot }
		::= { speedDualline10GMOverviewTable 1 }

	SpeedDualline10GMOverviewEntry ::=
		SEQUENCE
		{
			speedDualline10GMSlot INTEGER,
			speedDualline10GMDevice INTEGER,
			speedDualline10GMState INTEGER,
			speedDualline10GMSysName DisplayString,
			speedDualline10GMSysUpTime TimeTicks,
			speedDualline10GMTemperature INTEGER,
			speedDualline10GMAlarmState INTEGER,
			speedDualline10GMKernelImage DisplayString,
			speedDualline10GMAppImage DisplayString,
			speedDualline10GMHwVersion DisplayString,
			speedDualline10GMSerialNumber DisplayString,
			speedDualline10GMEthPortState INTEGER,
			speedDualline10GMUploadState INTEGER,
			speedDualline10GMUpdateState INTEGER
		}

	speedDualline10GMSlot OBJECT-TYPE
		SYNTAX INTEGER (1..17)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Slot number"
		::= { speedDualline10GMOverviewEntry 2 }

	speedDualline10GMDevice OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			speedDualline10GXFP(8),
			speedDualline10GSFP(9),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"device type"
		::= { speedDualline10GMOverviewEntry 3 }

	speedDualline10GMState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			running(1),
			resetSoftware(2),
			resetConfig(3),
			resetCAN(4),
			resetHardware(5),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Device oper state. If setting resetConfig, you also have to reset the hardware."
		::= { speedDualline10GMOverviewEntry 4 }

	speedDualline10GMSysName OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Modules name or description"
		::= { speedDualline10GMOverviewEntry 5 }

	speedDualline10GMSysUpTime OBJECT-TYPE
		SYNTAX TimeTicks
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"System Up Time in Seconds"
		::= { speedDualline10GMOverviewEntry 6 }

	speedDualline10GMTemperature OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Board temperature"
		::= { speedDualline10GMOverviewEntry 7 }

	speedDualline10GMAlarmState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			noAlarm(1),
			activeAlarms(2),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"global device alarm state"
		::= { speedDualline10GMOverviewEntry 8 }

	speedDualline10GMKernelImage OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"kernel version"
		::= { speedDualline10GMOverviewEntry 9 }

	speedDualline10GMAppImage OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"software version"
		::= { speedDualline10GMOverviewEntry 10 }

	speedDualline10GMHwVersion OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..17))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"board hardware version"
		::= { speedDualline10GMOverviewEntry 11 }

	speedDualline10GMSerialNumber OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..17))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"board serial number"
		::= { speedDualline10GMOverviewEntry 12 }

	speedDualline10GMEthPortState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notavailable(0),
			linkDown(1),
			hdx10(2),
			fdx10(3),
			hdx100(4),
			fdx100(5),
			off(6),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Ethernet Port State (copper management port)"
		::= { speedDualline10GMOverviewEntry 13 }


	speedDualline10GMUploadState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			ready(1),
			startUpload(2),
			uploadActive(3),
			uploadFailure(4),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"software update state"
		::= { speedDualline10GMOverviewEntry 14 }

	speedDualline10GMUpdateState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			idle(1),
			activateKernel (2),
			activateApplication (3),
			unknown(255)
		}
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"software update state"
		::= { speedDualline10GMOverviewEntry 15 }

-- *********************************

	speedDualline10GMConfigTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDualline10GMConfigEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline 10G module config table"
		::= { speedDualline10G 2 }

	speedDualline10GMConfigEntry OBJECT-TYPE
		SYNTAX SpeedDualline10GMConfigEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module config entries"
		INDEX { speedDualline10GMSlot }
		::= { speedDualline10GMConfigTable 1 }

	SpeedDualline10GMConfigEntry ::=
		SEQUENCE
		{
--			speedDualline10GMIndex INTEGER,
			speedDualline10GMSlot INTEGER,
			speedDualline10GMIpAddress IpAddress,
			speedDualline10GMIpNetmask IpAddress,
			speedDualline10GMIpGateway IpAddress,
			speedDualline10GMTrapSink1 IpAddress,
			speedDualline10GMTrapSink2 IpAddress,
			speedDualline10GMTrapSink3 IpAddress,
			speedDualline10GMTrapSink4 IpAddress,
			speedDualline10GMTrapSink5 IpAddress,
			speedDualline10GMSNMPReadCommunity DisplayString,
			speedDualline10GMSNMPWriteCommunity DisplayString,
			speedDualline10GMTempWarningLevel INTEGER,
			speedDualline10GMTempAlarmLevel INTEGER,
			speedDualline10GMSNMPSyscontact DisplayString,
			speedDualline10GMSNMPSyslocation DisplayString,
			speedDualline10GMPortTxConnection INTEGER,
			speedDualline10GMUserTimeout INTEGER,
			speedDualline10GMEthPortMode INTEGER,
			speedDualline10GMAccess INTEGER
		}

	speedDualline10GMIpAddress OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"device IP-address"
		DEFVAL { 'c0a80066'H }	-- 192.168.0.102
		::= { speedDualline10GMConfigEntry 3 }

	speedDualline10GMIpNetmask OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"device IP-mask"
		DEFVAL { 'ffffff00'H }	-- 255.255.255.0
		::= { speedDualline10GMConfigEntry 4 }

	speedDualline10GMIpGateway OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"device default gateway"
		::= { speedDualline10GMConfigEntry 5 }

	speedDualline10GMTrapSink1 OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp trapsink 1"
		::= { speedDualline10GMConfigEntry 6 }

	speedDualline10GMTrapSink2 OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp trapsink 2"
		::= { speedDualline10GMConfigEntry 7 }

	speedDualline10GMTrapSink3 OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp trapsink 3"
		::= { speedDualline10GMConfigEntry 8 }

	speedDualline10GMTrapSink4 OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp trapsink 4"
		::= { speedDualline10GMConfigEntry 9 }

	speedDualline10GMTrapSink5 OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp trapsink 5"
		::= { speedDualline10GMConfigEntry 10 }

	speedDualline10GMSNMPReadCommunity OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp read community"
		::= { speedDualline10GMConfigEntry 11 }

	speedDualline10GMSNMPWriteCommunity OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp write community"
		::= { speedDualline10GMConfigEntry 12 }

	speedDualline10GMTempWarningLevel OBJECT-TYPE
		SYNTAX INTEGER (5..60)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"high temperature warning level"
		::= { speedDualline10GMConfigEntry 13 }

	speedDualline10GMTempAlarmLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"high temperature alarm level"
		::= { speedDualline10GMConfigEntry 14 }

	speedDualline10GMSNMPSyscontact OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp syscontact"
		::= { speedDualline10GMConfigEntry 15 }

	speedDualline10GMSNMPSyslocation OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp syslocation"
		::= { speedDualline10GMConfigEntry 16 }

	speedDualline10GMPortTxConnection OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			connect1to3and2to4(1),
			connect1to4and2to3(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port tx connection"
		::= { speedDualline10GMConfigEntry 17 }

	speedDualline10GMUserTimeout OBJECT-TYPE
		SYNTAX INTEGER (120..3600)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"CLI user timeout. Valid from 120 to 3600 seconds."
		::= { speedDualline10GMConfigEntry 18 }

	speedDualline10GMEthPortMode OBJECT-TYPE
		SYNTAX INTEGER
		{
			notavailable(0),
			autoneg(1),
			hdx10(2),
			fdx10(3),
			hdx100(4),
			fdx100(5),
			off(6),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Admin config for Ethernet port on 10G card."
		::= { speedDualline10GMConfigEntry 19 }

	speedDualline10GMAccess OBJECT-TYPE
		SYNTAX INTEGER
		{
			notavailable(0),
			off(1),
			telnet(2),
			ssh2(3),
			notImplemented(254),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"command line access method to this system"
		::= { speedDualline10GMConfigEntry 20 }

--	speedDualline10GMSNMPAgent OBJECT-TYPE
--		SYNTAX INTEGER
--		{
--			notAvailable(0),
--			off(1),
--			on(2),
--			notImplemented(254),
--			unknown(255)
--		}
--		MAX-ACCESS read-write
--		STATUS current
--		DESCRIPTION
--			"Admin config of SNMP agend"
--		::= { speedDualline10GMConfigEntry 21 }

--	speedDualline10GMHTTPAgent OBJECT-TYPE
--		SYNTAX INTEGER
--		{
--			notAvailable(0),
--			off(1),
--			on(2),
--			notImplemented(254),
--			unknown(255)
--		}
--		MAX-ACCESS read-write
--		STATUS current
--		DESCRIPTION
--			"Admin config of HTTP agend"
--		::= { speedDualline10GMConfigEntry 22 }
-- *********************************

	speedDualline10GMProtectionTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDualline10GMProtectionEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline 10G module Protection table"
		::= { speedDualline10G 3 }

	speedDualline10GMProtectionEntry OBJECT-TYPE
		SYNTAX SpeedDualline10GMProtectionEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module Protection entries"
		INDEX { speedDualline10GMSlot }
		::= { speedDualline10GMProtectionTable 1 }

	SpeedDualline10GMProtectionEntry ::=
		SEQUENCE
		{
--			speedDualline10GMIndex INTEGER,
			speedDualline10GMSlot INTEGER,
			speedDualline10GMLinkProtectionConfig INTEGER,
			speedDualline10GMLinkProtectionState INTEGER,
			speedDualline10GMLinkProtectionFallbackTime INTEGER,
			speedDualline10GMLinkProtectionRXLevelPort1 INTEGER,
			speedDualline10GMLinkProtectionRXLevelPort2 INTEGER,
			speedDualline10GMLinkProtectionClientPort INTEGER,
			speedDualline10GMLinkProtectionMode INTEGER
		}

	speedDualline10GMLinkProtectionConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			unknown(0),
			protectionOFF(1),
			protectionOn(2),
			notAvailable(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"enable/disable the link protection"
		::= { speedDualline10GMProtectionEntry 3 }

	speedDualline10GMLinkProtectionState OBJECT-TYPE
		SYNTAX INTEGER
		{
			unknown(0),
			port1active(1),
			port2active(2),
			testingPort1(3),
			testingPort2(4),
			noneActive(5),
			notAvailable(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"link protection state"
		::= { speedDualline10GMProtectionEntry 4 }

	speedDualline10GMLinkProtectionFallbackTime OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"fallback time to main link. Min 5 sec. to max 3600 seconds."
		::= { speedDualline10GMProtectionEntry 5 }

	speedDualline10GMLinkProtectionRXLevelPort1 OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"min RX-power level for switch over"
		::= { speedDualline10GMProtectionEntry 6 }

	speedDualline10GMLinkProtectionRXLevelPort2 OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"min RX-power level for switch over"
		::= { speedDualline10GMProtectionEntry 7 }

	speedDualline10GMLinkProtectionClientPort OBJECT-TYPE
		SYNTAX INTEGER
		{
			notavailable(0),
			port3(1),
			port4(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"choose prefered client port"
		::= { speedDualline10GMProtectionEntry 8 }

	speedDualline10GMLinkProtectionMode OBJECT-TYPE
		SYNTAX INTEGER
		{
			notavailable(0),
			fallbackPort1(1),
			fallbackPort2(2),
			staticPort1(3),
			staticPort2(4),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"protection working mode"
		::= { speedDualline10GMProtectionEntry 9 }

-- *********************************

	speedDualline10GPortOverviewTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDualline10GPortOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline 10G port overview table"
		::= { speedDualline10G 4 }

	speedDualline10GPortOverviewEntry OBJECT-TYPE
		SYNTAX SpeedDualline10GPortOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module port overview entries"
		INDEX { speedDualline10GPortIndex }
		::= { speedDualline10GPortOverviewTable 1 }

	SpeedDualline10GPortOverviewEntry ::=
		SEQUENCE
		{
			speedDualline10GPortIndex INTEGER,
			speedDualline10GPortSlot INTEGER,
			speedDualline10GPortPort INTEGER,
			speedDualline10GPortDescription DisplayString,
			speedDualline10GPortAdminConfig INTEGER,
			speedDualline10GPortOperState INTEGER,
			speedDualline10GPortXCVState INTEGER,
			speedDualline10GPortLLCFconfig INTEGER,
			speedDualline10GPortLoopConfig INTEGER,
			speedDualline10GPortSpeedConfig INTEGER,
			speedDualline10GPortAlarmState INTEGER,
			speedDualline10GPortAlarmDeactivation INTEGER,
			speedDualline10GPortAlarmSchedule  INTEGER
		}


	speedDualline10GPortIndex OBJECT-TYPE
		SYNTAX INTEGER (1..1900)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Port Index"
		::= { speedDualline10GPortOverviewEntry 1 }

	speedDualline10GPortSlot OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Slot number"
		::= { speedDualline10GPortOverviewEntry 2 }

	speedDualline10GPortPort OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"port number"
		::= { speedDualline10GPortOverviewEntry 3 }

	speedDualline10GPortDescription OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port description"
		::= { speedDualline10GPortOverviewEntry 4 }

	speedDualline10GPortAdminConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			adminDown(1),
			adminUp(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port admin config"
		::= { speedDualline10GPortOverviewEntry 5 }

	speedDualline10GPortOperState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			down(1),
			up(2),
			loop(3),
			downLLCF(4),
			downTxFault(5),
			downRxLevel(6),
			downTxLevel(7),
			bertRunnung(8),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"port operational state"
		::= { speedDualline10GPortOverviewEntry 6 }

	speedDualline10GPortXCVState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			xcvRemoved(1),
			xcvInstalled(2),
			xcvTxFault(3),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver installation state"
		::= { speedDualline10GPortOverviewEntry 7 }

	speedDualline10GPortLLCFconfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			off(1),
			on(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port link loss cary forward config"
		::= { speedDualline10GPortOverviewEntry 8 }

	speedDualline10GPortLoopConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			off(1),
			on(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port loop config"
		::= { speedDualline10GPortOverviewEntry 9 }

	speedDualline10GPortSpeedConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			speed10G(0),
			notAvailable(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"port 3R speed in kbit/s"
		::= { speedDualline10GPortOverviewEntry 10 }

	speedDualline10GPortAlarmState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			noAlarms(1),
			activeAlarms(2),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"port alarm state"
		::= { speedDualline10GPortOverviewEntry 11 }

	speedDualline10GPortAlarmDeactivation OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			alarmReportingEnabled(1),
			alarmReportingDisabledbySchedule(2),
			alarmReportingDisabledPermanent(3),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Port alarm deactivation schedule"
		::= { speedDualline10GPortOverviewEntry 12 }

	speedDualline10GPortAlarmSchedule OBJECT-TYPE
		SYNTAX INTEGER (0..1200)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Port alarm deactivation schedule. Value in hours. After this time has elapsed, the alarms are active again. Valid range: 1..1200. 0 means less then 1 hour"
		::= { speedDualline10GPortOverviewEntry 13 }

-- *********************************

	speedDualline10GXCVOverviewTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDualline10GXCVOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline 10G transceiver overview table"
		::= { speedDualline10G 5 }

	speedDualline10GXCVOverviewEntry OBJECT-TYPE
		SYNTAX SpeedDualline10GXCVOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module transceiver overview entries"
		INDEX { speedDualline10GPortIndex }
		::= { speedDualline10GXCVOverviewTable 1 }

	SpeedDualline10GXCVOverviewEntry ::=
		SEQUENCE
		{
			speedDualline10GPortIndex INTEGER,
			speedDualline10GPortSlot INTEGER,
			speedDualline10GPortPort INTEGER,
			speedDualline10GPortXCVVendorName DisplayString,
			speedDualline10GPortXCVVendorPartNumber DisplayString,
			speedDualline10GPortXCVVendorSerialNumber DisplayString,
			speedDualline10GPortXCVType INTEGER,
			speedDualline10GPortXCVConnector INTEGER,
			speedDualline10GPortXCVWavelength INTEGER,
			speedDualline10GPortXCVDMIState INTEGER
		}

	speedDualline10GPortXCVVendorName OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver vendor name"
		::= { speedDualline10GXCVOverviewEntry 4 }

	speedDualline10GPortXCVVendorPartNumber OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver part number"
		::= { speedDualline10GXCVOverviewEntry 5 }

	speedDualline10GPortXCVVendorSerialNumber OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver serial number"
		::= { speedDualline10GXCVOverviewEntry 6 }

	speedDualline10GPortXCVType OBJECT-TYPE
		SYNTAX INTEGER
		{
			unspecified(0),
			tGBIC(1),
			tModuleSolderedToMotherboard(2),
			tSFPTransceiver(3),
			t300PinXBI(4),
			tXENPAK(5),
			tXFP(6),
			tXFF(7),
			tXFP-E(8),
			tXPAK(9),
			tX2(10),
			tDWDMSFPTransceiver(11),
			tCopperSFPTransceiver(254),
			vendorSpecific(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver type"
		::= { speedDualline10GXCVOverviewEntry 7 }

	speedDualline10GPortXCVConnector OBJECT-TYPE
		SYNTAX INTEGER
		{
			unspecified(0),
			cSC(1),
			cFibreChannelStyle1CopperConnector(2),
			cFibreChannelStyle2CopperConnector(3),
			cBncTnc(4),
			cFibreChannerCoaxialHeader(5),
			cFibreJack(6),
			cLC(7),
			cMTRJ(8),
			cMU(9),
			cSG(10),
			cOpticalPigtail(11),
			cHSSDCII(32),
			cCopperPigtail(33),
			cRJ45(34),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver connector"
		::= { speedDualline10GXCVOverviewEntry 8 }

	speedDualline10GPortXCVWavelength OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver supported wavelength (value * 100)"
		::= { speedDualline10GXCVOverviewEntry 9 }

	speedDualline10GPortXCVDMIState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			sff8472V93(1),
			sff8472V95(2),
			sff8472V102(3),
			sff8472V104(4),
			sff8472V11(5),
			dmiAvailable(253),
			notImplemented(254),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver DMI compliance"
		::= { speedDualline10GXCVOverviewEntry 10 }

-- *********************************

	speedDualline10GXCVFeatureTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDualline10GXCVFeatureEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline 10G transceiver feature table"
		::= { speedDualline10G 6 }

	speedDualline10GXCVFeatureEntry OBJECT-TYPE
		SYNTAX SpeedDualline10GXCVFeatureEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module transceiver feature entries"
		INDEX { speedDualline10GPortIndex }
		::= { speedDualline10GXCVFeatureTable 1 }

	SpeedDualline10GXCVFeatureEntry ::=
		SEQUENCE
		{
			speedDualline10GPortIndex INTEGER,
			speedDualline10GPortSlot INTEGER,
			speedDualline10GPortPort INTEGER,
			speedDualline10GPortXCVBitrateMax INTEGER,
			speedDualline10GPortXCVBitrateMin INTEGER,
			speedDualline10GPortXCVLengthSMkm INTEGER,
			speedDualline10GPortXCVLength50 INTEGER,
			speedDualline10GPortXCVLength62 INTEGER,
			speedDualline10GPortXCVLengthCopper INTEGER
		}

	speedDualline10GPortXCVBitrateMax OBJECT-TYPE
		SYNTAX INTEGER
		{
			unspecified(0)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The upper bit rate limit at which the SFP transceiver will still meet its specifications is specified in units of 1 Megabit per second. A value of 0 indicates that this field is not specified."
		::= { speedDualline10GXCVFeatureEntry 4 }

	speedDualline10GPortXCVBitrateMin OBJECT-TYPE
		SYNTAX INTEGER
		{
			unspecified(0)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The lower bit rate limit at which the SFP transceiver will still meet its specifications is specified in units of 1 Megabit per second. A value of 0 indicates that this field is not specified."
		::= { speedDualline10GXCVFeatureEntry 5 }

	speedDualline10GPortXCVLengthSMkm OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"This value specifies the link length that is supported by the SFP transceiver while operating in compliance with the applicable standards using single mode fiber. The value is in units of kilometers. A value of 255 means that the transceiver supports a link greater than 254 km. A value of 0 means that the transceiver does not support single mode fiber or that the length information must be determined from the transceiver technology."
		::= { speedDualline10GXCVFeatureEntry 6 }

	speedDualline10GPortXCVLength50 OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"This value specifies the link length that is supported by the SFP transceiver while operating in compliance with the applicable standards using 50 micron OM2 multi mode fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a link greater than 2.54 km. A value of 0 means that the transceiver does not support 50 micron multi mode fiber or that the length information must be determined from the transceiver technology."
		::= { speedDualline10GXCVFeatureEntry 7 }

	speedDualline10GPortXCVLength62 OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"This value specifies the link length that is supported	by the SFP transceiver while operating in compliance with the applicable standards using 62.5 micron multi mode fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a link greater than 2.54 km. A value of 0 means that the transceiver does not support 62.5 micron multi mode fiber or that the length information must be determined from the transceiver technology."
		::= { speedDualline10GXCVFeatureEntry 8 }

	speedDualline10GPortXCVLengthCopper OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"This value specifies the link length that is supported by the SFP transceiver while operating in compliance with the applicable standards using copper cable. The value is in units of 1 meter. A value of 255 means that the transceiver supports a link greater than 254 m. A value of 0 means that the transceiver does not support copper cable or that the length information must be determined from the transceiver technology. Further information about the cable design, equalization, and connectors is usually required to guarantee meeting of particular length information."
		::= { speedDualline10GXCVFeatureEntry 9 }

-- *********************************

	speedDualline10GXCVMeassurementTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDualline10GXCVMeassurementEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline 10G transceiver DMI meassurement table"
		::= { speedDualline10G 7 }

	speedDualline10GXCVMeassurementEntry OBJECT-TYPE
		SYNTAX SpeedDualline10GXCVMeassurementEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module transceiver DMI meassurement entries"
		INDEX { speedDualline10GPortIndex }
		::= { speedDualline10GXCVMeassurementTable 1 }

	SpeedDualline10GXCVMeassurementEntry ::=
		SEQUENCE
		{
			speedDualline10GPortIndex INTEGER,
			speedDualline10GPortSlot INTEGER,
			speedDualline10GPortPort INTEGER,
			speedDualline10GPortXCVDMIRxLevel INTEGER,
			speedDualline10GPortXCVDMITxLevel INTEGER,
			speedDualline10GPortXCVDMITxBias INTEGER,
			speedDualline10GPortXCVDMITemp INTEGER
		}


	speedDualline10GPortXCVDMIRxLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"optical receive level (dBm value * 100)"
		::= { speedDualline10GXCVMeassurementEntry 4 }

	speedDualline10GPortXCVDMITxLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"optical transmit level (dBm value * 100)"
		::= { speedDualline10GXCVMeassurementEntry 5 }

	speedDualline10GPortXCVDMITxBias OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transmitter TX bias current (mA)"
		::= { speedDualline10GXCVMeassurementEntry 6 }

	speedDualline10GPortXCVDMITemp OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transmitter temperature (degree Celsius)"
		::= { speedDualline10GXCVMeassurementEntry 7 }

-- *********************************

	speedDualline10GXCVAlarmTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDualline10GXCVAlarmEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline 10G transceiver alarm table"
		::= { speedDualline10G 8 }

	speedDualline10GXCVAlarmEntry OBJECT-TYPE
		SYNTAX SpeedDualline10GXCVAlarmEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module transceiver alarm entries"
		INDEX { speedDualline10GPortIndex }
		::= { speedDualline10GXCVAlarmTable 1 }

	SpeedDualline10GXCVAlarmEntry ::=
		SEQUENCE
		{
			speedDualline10GPortIndex INTEGER,
			speedDualline10GPortSlot INTEGER,
			speedDualline10GPortPort INTEGER,
			speedDualline10GPortXCVDMIRxPowerAlarm INTEGER,
			speedDualline10GPortXCVDMITxLowAlarm INTEGER,
			speedDualline10GPortXCVDMIBiasAlarmEvent INTEGER,
			speedDualline10GPortXCVDWDMLaserTempAlarmEvent INTEGER,
			speedDualline10GPortXCVDWDMTECAlarmEvent INTEGER,
			speedDualline10GPortXCVTempHighAlarm INTEGER,
			speedDualline10GPortXCVCDRALARM INTEGER
		}

	speedDualline10GPortXCVDMIRxPowerAlarm OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			noAlarm(1),
			rxLowWarning(2),
			rxLowAlarm(3),
			rxHighAlarm(4),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver RX power event"
		::= { speedDualline10GXCVAlarmEntry 4 }

	speedDualline10GPortXCVDMITxLowAlarm OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			noAlarm(1),
			activeAlarms(2),
			unknown (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver TX power event"
		::= { speedDualline10GXCVAlarmEntry 5 }

	speedDualline10GPortXCVDMIBiasAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			noAlarm(1),
			activeAlarms(2),
			unknown (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver bias current event"
		::= { speedDualline10GXCVAlarmEntry 6 }

	speedDualline10GPortXCVDWDMLaserTempAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable (0),
			noAlarm (1),
			lowAlarm (2),
			highAlarm(3),
			unknown (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver DWDM laser temperature event"
		::= { speedDualline10GXCVAlarmEntry 7 }

	speedDualline10GPortXCVDWDMTECAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			noAlarm(1),
			activeAlarms(2),
			unknown (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver DWDM TEC event"
		::= { speedDualline10GXCVAlarmEntry 8 }

	speedDualline10GPortXCVTempHighAlarm OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			noAlarm(1),
			highWarning(2),
			highAlarm(3),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver temperature Event"
		::= { speedDualline10GXCVAlarmEntry 9 }

	speedDualline10GPortXCVCDRALARM OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			noAlarm(1),
			activeAlarm(2),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"clock data recovery Event"
		::= { speedDualline10GXCVAlarmEntry 10 }

-- *********************************

	speedDualline10GMBoardAlarmTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDualline10GMBoardAlarmEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline 10G module board alarm table"
		::= { speedDualline10G 9 }

	speedDualline10GMBoardAlarmEntry OBJECT-TYPE
		SYNTAX SpeedDualline10GMBoardAlarmEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module board alarm entries"
		INDEX { speedDualline10GMSlot }
		::= { speedDualline10GMBoardAlarmTable 1 }

	SpeedDualline10GMBoardAlarmEntry ::=
		SEQUENCE
		{
--			speedDualline10GMIndex INTEGER,
			speedDualline10GMSlot INTEGER,
			speedDualline10GMBoardTempAlarm INTEGER
		}

	speedDualline10GMBoardTempAlarm OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			noAlarm(1),
			highWarning(2),
			highAlarm(3),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"board temperature Event"
		::= { speedDualline10GMBoardAlarmEntry 3 }

-- *********************************
	speedDualline10GXCVTunableTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDualline10GXCVTunableEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline tunable transceiver table"
		::= { speedDualline10G 10 }

	speedDualline10GXCVTunableEntry OBJECT-TYPE
		SYNTAX SpeedDualline10GXCVTunableEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"transceiver tunable entries"
		INDEX { speedDualline10GPortIndex }
		::= { speedDualline10GXCVTunableTable 1 }

	SpeedDualline10GXCVTunableEntry ::=
		SEQUENCE
		{
			speedDualline10GPortIndex INTEGER,
			speedDualline10GPortSlot INTEGER,
			speedDualline10GPortPort INTEGER,
			speedDualline10GPortXCVChannelSpacing INTEGER,
			speedDualline10GPortXCVNumberOfChannels INTEGER,
			speedDualline10GPortXCVCenterWavlength INTEGER,
			speedDualline10GPortXCVLaserWavelengthTolerance INTEGER,
			speedDualline10GPortXCVTunableFeature INTEGER,
			speedDualline10GPortXCVTunableMinMaxChannel DisplayString,
			speedDualline10GPortXCVTunableWavelengthConfig INTEGER,
			speedDualline10GPortXCVTunableChannelConfig DisplayString,
			speedDualline10GPortXCVTunableConfigSelection INTEGER
		}

	speedDualline10GPortXCVChannelSpacing OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XCV channel spacing"
		::= { speedDualline10GXCVTunableEntry 4 }

	speedDualline10GPortXCVNumberOfChannels OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XCV supported number channels"
		::= { speedDualline10GXCVTunableEntry 5 }

	speedDualline10GPortXCVCenterWavlength OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XCV center wavelength"
		::= { speedDualline10GXCVTunableEntry 6 }

	speedDualline10GPortXCVLaserWavelengthTolerance OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XCV wavelength tolerance / tunable range"
		::= { speedDualline10GXCVTunableEntry 7 }

	speedDualline10GPortXCVTunableFeature OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable (0),
			notTunable (1),
			byWavelength (2),
			byChannel (4),
			byChannelAndWavelength (6)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"is transceiver tunable?"
		::= { speedDualline10GXCVTunableEntry 8 }

	speedDualline10GPortXCVTunableMinMaxChannel OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..9))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Set parameter for transceiver channel config. "
		::= { speedDualline10GXCVTunableEntry 9 }

	speedDualline10GPortXCVTunableWavelengthConfig OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"XCV wavelength control. Wavelength value in units of pm!"
		::= { speedDualline10GXCVTunableEntry 10 }

	speedDualline10GPortXCVTunableChannelConfig OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..4))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Set parameter for transceiver channel config. "
		::= { speedDualline10GXCVTunableEntry 11 }

	speedDualline10GPortXCVTunableConfigSelection OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			xcvInternal(1),
			configFile(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"selects which config should be used (internal XCV or transponder card config)"
		::= { speedDualline10GXCVTunableEntry 12 }

END