WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/nortel/NTWS-AP-CONFIG-MIB

2307 lines
78 KiB
Plaintext
Raw Permalink Blame History

NTWS-AP-CONFIG-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue
FROM SNMPv2-TC
NtwsApNum, NtwsApAttachType, NtwsApSerialNum,
NtwsApFingerprint, NtwsApBias,
NtwsApRadioIndex, NtwsRadioMode, NtwsRadioType,
NtwsPowerLevel, NtwsChannelNum,
NtwsRadioChannelWidth, NtwsApPowerMode,
NtwsRadioAntennaLocation, NtwsApLedMode
FROM NTWS-AP-TC
NtwsPhysPortNumberOrZero
FROM NTWS-BASIC-TC
ntwsMibs
FROM NTWS-ROOT-MIB;
ntwsApConfigMib MODULE-IDENTITY
LAST-UPDATED "200911190108Z"
ORGANIZATION "Nortel Networks"
CONTACT-INFO
"www.nortelnetworks.com"
DESCRIPTION
"AP Configuration objects for Nortel Networks wireless switches.
AP = Access Point;
AC = Access Controller (wireless switch),
the device that runs a SNMP Agent implementing this MIB.
Copyright 2009 Nortel Networks.
All rights reserved.
This Nortel Networks SNMP Management Information Base Specification
(Specification) embodies Nortel Networks' confidential and
proprietary intellectual property.
This Specification is supplied 'AS IS' and Nortel Networks
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification."
REVISION "200911190108Z"
DESCRIPTION "v1.0.8: Initial version"
::= { ntwsMibs 14 }
-- Textual conventions
NtwsApTemplateName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"AP Template Name, consists of printable ASCII characters
between 0x21 (!), and 0x7d (}) with no leading, embedded,
or trailing space.
Cannot be a zero length string."
SYNTAX OCTET STRING (SIZE (1..32))
NtwsRadioProfileName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"Radio Profile Name, consists of printable ASCII characters
between 0x21 (!), and 0x7d (}) with no leading, embedded,
or trailing space.
Cannot be a zero length string."
SYNTAX OCTET STRING (SIZE (1..16))
NtwsServiceProfileName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"Service Profile Name, consists of printable ASCII characters
between 0x21 (!), and 0x7d (}) with no leading, embedded,
or trailing space.
Cannot be a zero length string."
SYNTAX OCTET STRING (SIZE (1..32))
NtwsSnoopFilterName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"Snoop Filter Name, consists of printable ASCII characters
between 0x21 (!), and 0x7d (}) with no leading, embedded,
or trailing space.
Cannot be a zero length string."
SYNTAX OCTET STRING (SIZE (1..15))
NtwsServiceProfileSsidType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of Service Types provided on a service profile."
SYNTAX INTEGER {
clear (1),
crypto (2)
}
NtwsServiceProfile11nMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of 802.11n modes for a service profile."
SYNTAX INTEGER {
enable (1),
disable (2),
required (3)
}
NtwsServiceProfile11nFrameAggregationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of 802.11n frame aggregation types
for a service profile."
SYNTAX INTEGER {
msdu (1),
mpdu (2),
all (3),
disable (4)
}
NtwsServiceProfile11nMsduMaxLength ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of 802.11n A-MSDU maximum lengths
for a service profile."
SYNTAX INTEGER {
msdu-4k (1),
msdu-8k (2)
}
NtwsServiceProfile11nMpduMaxLength ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of 802.11n A-MPDU maximum lengths
for a service profile."
SYNTAX INTEGER {
mpdu-8k (1),
mpdu-16k (2),
mpdu-32k (3),
mpdu-64k (4)
}
NtwsServiceProfileAuthFallthruType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of Authentication Fallthrough types
for a service profile."
SYNTAX INTEGER {
none (1),
web-auth (2),
web-aaa-portal (3),
last-resort (4)
}
NtwsServiceProfileCacMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of Call Admission Control types
for a service profile."
SYNTAX INTEGER {
none (1),
session (2),
vendor (3)
}
NtwsRadioProfileCountermeasuresMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the Countermeasure modes for a radio profile."
SYNTAX INTEGER {
none (1),
all (2),
rogue (3),
configured (4)
}
NtwsRadioProfileRFScanChannelScope ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of RF scanning channel scopes
for a radio profile."
SYNTAX INTEGER {
operating (1),
regulatory (2),
all (3)
}
NtwsRadioProfileAutoTuneChannelRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of Auto-Tune channel ranges
for a radio profile."
SYNTAX INTEGER {
all-bands (1),
lower-bands (2)
}
NtwsRadioProfileRFScanMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of RF scanning modes for a radio profile."
SYNTAX INTEGER {
active (1),
passive (2)
}
--
-- The AP Config MIB Tree
--
ntwsApConfigMibObjects OBJECT IDENTIFIER ::= { ntwsApConfigMib 1 }
-- Reserved for future scalar objects (high-level configuration info):
-- ntwsApConfigGlobalObjects OBJECT IDENTIFIER ::= { ntwsApConfigMibObjects 1 }
-- Object definitions
-- ==================================
-- AP Config table
ntwsApConfApConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtwsApConfApConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing all the APs currently configured
on this AC."
::= { ntwsApConfigMibObjects 2 }
ntwsApConfApConfigEntry OBJECT-TYPE
SYNTAX NtwsApConfApConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration for a particular AP that could be attached to the AC."
INDEX { ntwsApConfApConfigApNum }
::= { ntwsApConfApConfigTable 1 }
NtwsApConfApConfigEntry ::= SEQUENCE {
ntwsApConfApConfigApNum NtwsApNum,
ntwsApConfApConfigApAttachType NtwsApAttachType,
ntwsApConfApConfigPhysPortNum NtwsPhysPortNumberOrZero,
ntwsApConfApConfigApSerialNum NtwsApSerialNum,
ntwsApConfApConfigApModelName DisplayString,
ntwsApConfApConfigFingerprint NtwsApFingerprint,
ntwsApConfApConfigBias NtwsApBias,
ntwsApConfApConfigApTimeout Unsigned32,
ntwsApConfApConfigApName DisplayString,
ntwsApConfApConfigContact DisplayString,
ntwsApConfApConfigLocation DisplayString,
ntwsApConfApConfigBlinkEnabled TruthValue,
ntwsApConfApConfigForceImageDownloadEnabled TruthValue,
ntwsApConfApConfigFirmwareUpgradeEnabled TruthValue,
ntwsApConfApConfigLocalSwitchingEnabled TruthValue,
ntwsApConfApConfigPowerMode NtwsApPowerMode,
ntwsApConfApConfigLedMode NtwsApLedMode,
ntwsApConfApConfigDescription DisplayString
}
ntwsApConfApConfigApNum OBJECT-TYPE
SYNTAX NtwsApNum
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Number of this AP (administratively assigned)."
::= { ntwsApConfApConfigEntry 1 }
ntwsApConfApConfigApAttachType OBJECT-TYPE
SYNTAX NtwsApAttachType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How this AP is attached to the AC
(directly or via L2/L3 network)."
::= { ntwsApConfApConfigEntry 2 }
ntwsApConfApConfigPhysPortNum OBJECT-TYPE
SYNTAX NtwsPhysPortNumberOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the physical port used to attach this AP.
Only valid for directly attached APs, otherwise will be zero."
::= { ntwsApConfApConfigEntry 3 }
ntwsApConfApConfigApSerialNum OBJECT-TYPE
SYNTAX NtwsApSerialNum
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Serial Number used to identify this AP.
Only valid for network attached APs,
otherwise will be a zero length string."
::= { ntwsApConfApConfigEntry 4 }
ntwsApConfApConfigApModelName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Model name of this AP."
::= { ntwsApConfApConfigEntry 5 }
ntwsApConfApConfigFingerprint OBJECT-TYPE
SYNTAX NtwsApFingerprint
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RSA key fingerprint configured on this AP (binary value:
it is the MD5 hash of the public key of the RSA key pair).
For directly attached APs the fingerprint is a zero length string."
::= { ntwsApConfApConfigEntry 6 }
ntwsApConfApConfigBias OBJECT-TYPE
SYNTAX NtwsApBias
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bias (high/low/sticky)."
::= { ntwsApConfApConfigEntry 7 }
ntwsApConfApConfigApTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The communication timeout for this AP, in seconds."
::= { ntwsApConfApConfigEntry 8 }
ntwsApConfApConfigApName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Name for this AP."
::= { ntwsApConfApConfigEntry 9 }
ntwsApConfApConfigContact OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Contact information for this AP."
::= { ntwsApConfApConfigEntry 10 }
ntwsApConfApConfigLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Location information for this AP."
::= { ntwsApConfApConfigEntry 11 }
ntwsApConfApConfigBlinkEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the LED blink mode is enabled on this AP."
::= { ntwsApConfApConfigEntry 12 }
ntwsApConfApConfigForceImageDownloadEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this AP is forced to always download
an image from the AC upon boot."
::= { ntwsApConfApConfigEntry 13 }
ntwsApConfApConfigFirmwareUpgradeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether automatic boot firmware upgrade
is enabled on this AP."
::= { ntwsApConfApConfigEntry 14 }
ntwsApConfApConfigLocalSwitchingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether local switching is enabled on this AP."
::= { ntwsApConfApConfigEntry 15 }
ntwsApConfApConfigPowerMode OBJECT-TYPE
SYNTAX NtwsApPowerMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode in which this AP is supplying power to its radios."
::= { ntwsApConfApConfigEntry 16 }
ntwsApConfApConfigLedMode OBJECT-TYPE
SYNTAX NtwsApLedMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LED Mode (auto/static/off)."
::= { ntwsApConfApConfigEntry 17 }
ntwsApConfApConfigDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Description for this AP."
::= { ntwsApConfApConfigEntry 18 }
-- ==================================
-- Radio Config table
ntwsApConfRadioConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtwsApConfRadioConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the radios on all the APs
currently configured on this AC."
::= { ntwsApConfigMibObjects 3 }
ntwsApConfRadioConfigEntry OBJECT-TYPE
SYNTAX NtwsApConfRadioConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration for a particular Radio on a particular AP
that could be attached to the AC."
INDEX { ntwsApConfRadioConfigApNum,
ntwsApConfRadioConfigRadioIndex }
::= { ntwsApConfRadioConfigTable 1 }
NtwsApConfRadioConfigEntry ::= SEQUENCE {
ntwsApConfRadioConfigApNum NtwsApNum,
ntwsApConfRadioConfigRadioIndex NtwsApRadioIndex,
ntwsApConfRadioConfigRadioType NtwsRadioType,
ntwsApConfRadioConfigRadioMode NtwsRadioMode,
ntwsApConfRadioConfigRadioProfileName NtwsRadioProfileName,
ntwsApConfRadioConfigChannel NtwsChannelNum,
ntwsApConfRadioConfigTxPower NtwsPowerLevel,
ntwsApConfRadioConfigAutoTuneMaxTxPower NtwsPowerLevel,
ntwsApConfRadioConfigAntennaType DisplayString,
ntwsApConfRadioConfigAntennaLocation NtwsRadioAntennaLocation,
ntwsApConfRadioConfigLoadBalancingEnabled TruthValue,
ntwsApConfRadioConfigLoadBalancingGroup DisplayString,
ntwsApConfRadioConfigLoadRebalancingEnabled TruthValue
}
ntwsApConfRadioConfigApNum OBJECT-TYPE
SYNTAX NtwsApNum
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Number of the AP (administratively assigned)."
::= { ntwsApConfRadioConfigEntry 1 }
ntwsApConfRadioConfigRadioIndex OBJECT-TYPE
SYNTAX NtwsApRadioIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this Radio on the AP."
::= { ntwsApConfRadioConfigEntry 2 }
ntwsApConfRadioConfigRadioType OBJECT-TYPE
SYNTAX NtwsRadioType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Type of this radio
(typeA, typeB, typeG, typeNA, typeNG)"
::= { ntwsApConfRadioConfigEntry 3 }
ntwsApConfRadioConfigRadioMode OBJECT-TYPE
SYNTAX NtwsRadioMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Mode of this radio (enabled/disabled/sentry)"
::= { ntwsApConfRadioConfigEntry 4 }
ntwsApConfRadioConfigRadioProfileName OBJECT-TYPE
SYNTAX NtwsRadioProfileName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the Radio Profile to be applied to this radio"
::= { ntwsApConfRadioConfigEntry 5 }
ntwsApConfRadioConfigChannel OBJECT-TYPE
SYNTAX NtwsChannelNum
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Channel Number of this radio."
::= { ntwsApConfRadioConfigEntry 6 }
ntwsApConfRadioConfigTxPower OBJECT-TYPE
SYNTAX NtwsPowerLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Tx Power level of this radio."
::= { ntwsApConfRadioConfigEntry 7 }
ntwsApConfRadioConfigAutoTuneMaxTxPower OBJECT-TYPE
SYNTAX NtwsPowerLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Tx Power that Auto Tune is allowed
to set for this radio."
::= { ntwsApConfRadioConfigEntry 8 }
ntwsApConfRadioConfigAntennaType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Antenna Type for this radio."
::= { ntwsApConfRadioConfigEntry 9 }
ntwsApConfRadioConfigAntennaLocation OBJECT-TYPE
SYNTAX NtwsRadioAntennaLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Antenna Location for this radio."
::= { ntwsApConfRadioConfigEntry 10 }
ntwsApConfRadioConfigLoadBalancingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether RF Load Balancing is enabled on this radio."
::= { ntwsApConfRadioConfigEntry 11 }
ntwsApConfRadioConfigLoadBalancingGroup OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the RF Load Balancing group that
this radio is assigned to."
::= { ntwsApConfRadioConfigEntry 12 }
ntwsApConfRadioConfigLoadRebalancingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether RF Load Rebalancing is enabled for this radio."
::= { ntwsApConfRadioConfigEntry 13 }
-- ==========================================================
-- AP Template main Config table (similar to AP Config table)
ntwsApConfApTemplateConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtwsApConfApTemplateConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing all the AP Templates currently configured
on this AC."
::= { ntwsApConfigMibObjects 4 }
ntwsApConfApTemplateConfigEntry OBJECT-TYPE
SYNTAX NtwsApConfApTemplateConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Template configuration for APs that could be attached to the AC."
INDEX { ntwsApConfApTemplConfApTemplateName }
::= { ntwsApConfApTemplateConfigTable 1 }
NtwsApConfApTemplateConfigEntry ::= SEQUENCE {
ntwsApConfApTemplConfApTemplateName NtwsApTemplateName,
ntwsApConfApTemplConfApTemplateEnabled TruthValue,
ntwsApConfApTemplConfBias NtwsApBias,
ntwsApConfApTemplConfApTimeout Unsigned32,
ntwsApConfApTemplConfBlinkEnabled TruthValue,
ntwsApConfApTemplConfForceImageDownloadEnabled TruthValue,
ntwsApConfApTemplConfFirmwareUpgradeEnabled TruthValue,
ntwsApConfApTemplConfLocalSwitchingEnabled TruthValue,
ntwsApConfApTemplConfPowerMode NtwsApPowerMode,
ntwsApConfApTemplConfLedMode NtwsApLedMode
}
ntwsApConfApTemplConfApTemplateName OBJECT-TYPE
SYNTAX NtwsApTemplateName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AP Template Name."
::= { ntwsApConfApTemplateConfigEntry 1 }
ntwsApConfApTemplConfApTemplateEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this AP Template is Enabled
(can be used for bringing up APs)."
::= { ntwsApConfApTemplateConfigEntry 2 }
ntwsApConfApTemplConfBias OBJECT-TYPE
SYNTAX NtwsApBias
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bias (high/low/sticky)."
::= { ntwsApConfApTemplateConfigEntry 3 }
ntwsApConfApTemplConfApTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The communication timeout for this AP Template, in seconds."
::= { ntwsApConfApTemplateConfigEntry 4 }
ntwsApConfApTemplConfBlinkEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the LED blink mode is enabled
on this AP Template."
::= { ntwsApConfApTemplateConfigEntry 5 }
ntwsApConfApTemplConfForceImageDownloadEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this AP is forced to always download
an image from the AC upon boot."
::= { ntwsApConfApTemplateConfigEntry 6 }
ntwsApConfApTemplConfFirmwareUpgradeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether automatic boot firmware upgrade
is enabled on this AP Template."
::= { ntwsApConfApTemplateConfigEntry 7 }
ntwsApConfApTemplConfLocalSwitchingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether local switching is enabled
on this AP Template."
::= { ntwsApConfApTemplateConfigEntry 8 }
ntwsApConfApTemplConfPowerMode OBJECT-TYPE
SYNTAX NtwsApPowerMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode in which an AP using this Template
will be supplying power to its radios."
::= { ntwsApConfApTemplateConfigEntry 9 }
ntwsApConfApTemplConfLedMode OBJECT-TYPE
SYNTAX NtwsApLedMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LED Mode (auto/static/off)
for an AP using this Template."
::= { ntwsApConfApTemplateConfigEntry 10 }
-- ==============================================================
-- AP Template Radio Config table (similar to Radio Config table)
ntwsApConfApTemplateRadioConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtwsApConfApTemplateRadioConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the radios for all the AP Templates
currently configured on this AC."
::= { ntwsApConfigMibObjects 5 }
ntwsApConfApTemplateRadioConfigEntry OBJECT-TYPE
SYNTAX NtwsApConfApTemplateRadioConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Template configuration for a particular Radio index
on an AP Template configured on this AC."
INDEX { ntwsApConfApTemRadioConfApTemplateName,
ntwsApConfApTemRadioConfRadioIndex }
::= { ntwsApConfApTemplateRadioConfigTable 1 }
NtwsApConfApTemplateRadioConfigEntry ::= SEQUENCE {
ntwsApConfApTemRadioConfApTemplateName NtwsApTemplateName,
ntwsApConfApTemRadioConfRadioIndex NtwsApRadioIndex,
ntwsApConfApTemRadioConfRadioMode NtwsRadioMode,
ntwsApConfApTemRadioConfRadioProfileName NtwsRadioProfileName,
ntwsApConfApTemRadioConfAutoTuneMaxTxPower NtwsPowerLevel,
ntwsApConfApTemRadioConfLoadBalancingEnabled TruthValue,
ntwsApConfApTemRadioConfLoadBalancingGroup DisplayString,
ntwsApConfApTemRadioConfLoadRebalancingEnabled TruthValue
}
ntwsApConfApTemRadioConfApTemplateName OBJECT-TYPE
SYNTAX NtwsApTemplateName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AP Template Name."
::= { ntwsApConfApTemplateRadioConfigEntry 1 }
ntwsApConfApTemRadioConfRadioIndex OBJECT-TYPE
SYNTAX NtwsApRadioIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this Radio on the AP Template."
::= { ntwsApConfApTemplateRadioConfigEntry 2 }
ntwsApConfApTemRadioConfRadioMode OBJECT-TYPE
SYNTAX NtwsRadioMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured mode of a radio using this Template
(enabled/disabled/sentry)"
::= { ntwsApConfApTemplateRadioConfigEntry 3 }
ntwsApConfApTemRadioConfRadioProfileName OBJECT-TYPE
SYNTAX NtwsRadioProfileName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the Radio Profile to be applied
to a radio using this Template"
::= { ntwsApConfApTemplateRadioConfigEntry 4 }
ntwsApConfApTemRadioConfAutoTuneMaxTxPower OBJECT-TYPE
SYNTAX NtwsPowerLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Tx Power that Auto Tune will be allowed
to set for a radio using this Template."
::= { ntwsApConfApTemplateRadioConfigEntry 5 }
ntwsApConfApTemRadioConfLoadBalancingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether RF Load Balancing will be enabled
on a radio using this Template."
::= { ntwsApConfApTemplateRadioConfigEntry 6 }
ntwsApConfApTemRadioConfLoadBalancingGroup OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the RF Load Balancing group that
a radio using this Template will be assigned to."
::= { ntwsApConfApTemplateRadioConfigEntry 7 }
ntwsApConfApTemRadioConfLoadRebalancingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether RF Load Rebalancing will be enabled
for a radio using this Template."
::= { ntwsApConfApTemplateRadioConfigEntry 8 }
-- ==========================
-- Radio Profile table
ntwsApConfRadioProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtwsApConfRadioProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the Radio Profiles
currently configured on this AC."
::= { ntwsApConfigMibObjects 6 }
ntwsApConfRadioProfileEntry OBJECT-TYPE
SYNTAX NtwsApConfRadioProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration for a particular Radio Profile."
INDEX { ntwsApConfRadioProfRadioProfileName }
::= { ntwsApConfRadioProfileTable 1 }
NtwsApConfRadioProfileEntry ::= SEQUENCE {
ntwsApConfRadioProfRadioProfileName NtwsRadioProfileName,
ntwsApConfRadioProfBeaconInterval Unsigned32,
ntwsApConfRadioProfDtimInterval Unsigned32,
ntwsApConfRadioProfChannelWidth11na NtwsRadioChannelWidth,
ntwsApConfRadioProfMaxTxLifetime Unsigned32,
ntwsApConfRadioProfMaxRxLifetime Unsigned32,
ntwsApConfRadioProfRtsThreshold Unsigned32,
ntwsApConfRadioProfFragThreshold Unsigned32,
ntwsApConfRadioProfLongXmitPreambleEnabled TruthValue,
ntwsApConfRadioProfCountermeasuresMode NtwsRadioProfileCountermeasuresMode,
ntwsApConfRadioProfRFScanMode NtwsRadioProfileRFScanMode,
ntwsApConfRadioProfRFScanChannelScope NtwsRadioProfileRFScanChannelScope,
ntwsApConfRadioProfRFScanCTSEnabled TruthValue,
ntwsApConfRadioProfAutoTune11aChannelRange NtwsRadioProfileAutoTuneChannelRange,
ntwsApConfRadioProfAutoTuneIgnoreClientsEnabled TruthValue,
ntwsApConfRadioProfAutoTuneChannelEnabled TruthValue,
ntwsApConfRadioProfAutoTuneChannelHolddownInterval Unsigned32,
ntwsApConfRadioProfAutoTuneChannelChangeInterval Unsigned32,
ntwsApConfRadioProfAutoTunePowerEnabled TruthValue,
ntwsApConfRadioProfAutoTunePowerRampInterval Unsigned32,
ntwsApConfRadioProfAutoTunePowerChangeInterval Unsigned32,
ntwsApConfRadioProfFairQueuingEnabled TruthValue,
ntwsApConfRadioProfCacBackgroundACMandatory TruthValue,
ntwsApConfRadioProfCacBackgroundMaxUtilization Unsigned32,
ntwsApConfRadioProfCacBackgroundPolicingEnabled TruthValue,
ntwsApConfRadioProfCacBestEffortACMandatory TruthValue,
ntwsApConfRadioProfCacBestEffortMaxUtilization Unsigned32,
ntwsApConfRadioProfCacBestEffortPolicingEnabled TruthValue,
ntwsApConfRadioProfCacVideoACMandatory TruthValue,
ntwsApConfRadioProfCacVideoMaxUtilization Unsigned32,
ntwsApConfRadioProfCacVideoPolicingEnabled TruthValue,
ntwsApConfRadioProfCacVoiceACMandatory TruthValue,
ntwsApConfRadioProfCacVoiceMaxUtilization Unsigned32,
ntwsApConfRadioProfCacVoicePolicingEnabled TruthValue,
ntwsApConfRadioProfRfidTagEnabled TruthValue,
ntwsApConfRadioProfWmmPowerSaveEnabled TruthValue,
ntwsApConfRadioProfRateEnforcementEnabled TruthValue,
ntwsApConfRadioProfDfsChannelsEnabled TruthValue
}
ntwsApConfRadioProfRadioProfileName OBJECT-TYPE
SYNTAX NtwsRadioProfileName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of this radio profile."
::= { ntwsApConfRadioProfileEntry 1 }
ntwsApConfRadioProfBeaconInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Beacon Interval, time in thousandths of a second,
for this radio profile."
::= { ntwsApConfRadioProfileEntry 2 }
ntwsApConfRadioProfDtimInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times after every beacon
that each AP radio in a radio profile sends a
delivery traffic indication map (DTIM),
for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 3 }
ntwsApConfRadioProfChannelWidth11na OBJECT-TYPE
SYNTAX NtwsRadioChannelWidth
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.11n Channel Width for the AP radios
using this radio profile."
::= { ntwsApConfRadioProfileEntry 4 }
ntwsApConfRadioProfMaxTxLifetime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum transmit threshold for the
AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 5 }
ntwsApConfRadioProfMaxRxLifetime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum receive threshold for the
AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 6 }
ntwsApConfRadioProfRtsThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RTS threshold for the AP radios using
this radio profile."
::= { ntwsApConfRadioProfileEntry 7 }
ntwsApConfRadioProfFragThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fragmentation threshold for the AP radios
using this radio profile."
::= { ntwsApConfRadioProfileEntry 8 }
ntwsApConfRadioProfLongXmitPreambleEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether an 802.11b/g AP radio using
this radio profile transmits Long Preamble."
::= { ntwsApConfRadioProfileEntry 9 }
ntwsApConfRadioProfCountermeasuresMode OBJECT-TYPE
SYNTAX NtwsRadioProfileCountermeasuresMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Countermeasures Mode for the AP radios
using this radio profile."
::= { ntwsApConfRadioProfileEntry 10 }
ntwsApConfRadioProfRFScanMode OBJECT-TYPE
SYNTAX NtwsRadioProfileRFScanMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RF Scanning Mode for the AP radios
using this radio profile."
::= { ntwsApConfRadioProfileEntry 11 }
ntwsApConfRadioProfRFScanChannelScope OBJECT-TYPE
SYNTAX NtwsRadioProfileRFScanChannelScope
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RF scanning Channel Scope for the AP radios
using this radio profile."
::= { ntwsApConfRadioProfileEntry 12 }
ntwsApConfRadioProfRFScanCTSEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the AP radios using this radio profile
send CTS To Self packet before going off channel."
::= { ntwsApConfRadioProfileEntry 13 }
ntwsApConfRadioProfAutoTune11aChannelRange OBJECT-TYPE
SYNTAX NtwsRadioProfileAutoTuneChannelRange
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The allowable 802.11a Channel Range used by Auto-Tune
for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 14 }
ntwsApConfRadioProfAutoTuneIgnoreClientsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the AP radios using this radio profile
Ignore Client connections in Auto-Tune channel selections."
::= { ntwsApConfRadioProfileEntry 15 }
ntwsApConfRadioProfAutoTuneChannelEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Channel Auto-Tuning
is enabled for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 16 }
ntwsApConfRadioProfAutoTuneChannelHolddownInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Interval (in seconds) between Channel changes
due to Auto-Tuning, for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 17 }
ntwsApConfRadioProfAutoTuneChannelChangeInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval (in seconds) at which RF Auto-Tuning
decides whether to Change the Channel for the AP radios
using this radio profile."
::= { ntwsApConfRadioProfileEntry 18 }
ntwsApConfRadioProfAutoTunePowerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Power Auto-Tuning is enabled
for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 19 }
ntwsApConfRadioProfAutoTunePowerRampInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Interval (in seconds) between Power changes
due to Auto-Tuning, for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 20 }
ntwsApConfRadioProfAutoTunePowerChangeInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval (in seconds) at which RF Auto-Tuning
decides whether to Change the Power for the AP radios
using this radio profile."
::= { ntwsApConfRadioProfileEntry 21 }
ntwsApConfRadioProfFairQueuingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether weighted Fair Queuing is enabled
for this radio profile."
::= { ntwsApConfRadioProfileEntry 22 }
ntwsApConfRadioProfCacBackgroundACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Admission Control for Background traffic
is Mandatory for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 23 }
ntwsApConfRadioProfCacBackgroundMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum admission control limit for Background traffic,
for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 24 }
ntwsApConfRadioProfCacBackgroundPolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that admission control Policing for
Background traffic is enabled, for the AP radios
using this radio profile."
::= { ntwsApConfRadioProfileEntry 25 }
ntwsApConfRadioProfCacBestEffortACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that Admission Control for Best Effort traffic
is Mandatory for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 26 }
ntwsApConfRadioProfCacBestEffortMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum admission control limit for Best Effort traffic,
for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 27 }
ntwsApConfRadioProfCacBestEffortPolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that admission control Policing for
Best Effort traffic is enabled, for the AP radios
using this radio profile."
::= { ntwsApConfRadioProfileEntry 28 }
ntwsApConfRadioProfCacVideoACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that Admission Control for Video traffic
is Mandatory for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 29 }
ntwsApConfRadioProfCacVideoMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum admission control limit for Video traffic,
for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 30 }
ntwsApConfRadioProfCacVideoPolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that admission control Policing for
Video traffic is enabled, for the AP radios
using this radio profile."
::= { ntwsApConfRadioProfileEntry 31 }
ntwsApConfRadioProfCacVoiceACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that Admission Control for Voice traffic
is Mandatory for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 32 }
ntwsApConfRadioProfCacVoiceMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum admission control limit for Voice traffic,
for the AP radios using this radio profile."
::= { ntwsApConfRadioProfileEntry 33 }
ntwsApConfRadioProfCacVoicePolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that admission control Policing for
Voice traffic is enabled, for the AP radios
using this radio profile."
::= { ntwsApConfRadioProfileEntry 34 }
ntwsApConfRadioProfRfidTagEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether an AP radio using this radio profile
is enabled to function as location receivers in an AeroScout
Visibility System."
::= { ntwsApConfRadioProfileEntry 35 }
ntwsApConfRadioProfWmmPowerSaveEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the AP radios using this radio profile
enable power save mode on WMM clients."
::= { ntwsApConfRadioProfileEntry 36 }
ntwsApConfRadioProfRateEnforcementEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether data rates are enforced for the AP radios
using this radio profile, which means
that a connecting client must transmit at one of the
mandatory or standard rates in order to associate
with the AP."
::= { ntwsApConfRadioProfileEntry 37 }
ntwsApConfRadioProfDfsChannelsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that the AP radios using this radio profile
use DFS channels to meet regulatory requirements."
::= { ntwsApConfRadioProfileEntry 38 }
-- =====================================================
-- Table for Service Profiles connected to Radio Profile
ntwsApConfRadioProfServiceProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtwsApConfRadioProfServiceProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the currently configured connections
between Radio Profiles and Service Profiles."
::= { ntwsApConfigMibObjects 7 }
ntwsApConfRadioProfServiceProfileEntry OBJECT-TYPE
SYNTAX NtwsApConfRadioProfServiceProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Connection between a Radio Profile and a Service Profile,
currently configured on the AC."
INDEX { ntwsApConfRpServpRadioProfileName,
ntwsApConfRpServpServiceProfileName }
::= { ntwsApConfRadioProfServiceProfileTable 1 }
NtwsApConfRadioProfServiceProfileEntry ::= SEQUENCE {
ntwsApConfRpServpRadioProfileName NtwsRadioProfileName,
ntwsApConfRpServpServiceProfileName NtwsServiceProfileName,
ntwsApConfRpServpRowStatus RowStatus
}
ntwsApConfRpServpRadioProfileName OBJECT-TYPE
SYNTAX NtwsRadioProfileName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of this Radio Profile."
::= { ntwsApConfRadioProfServiceProfileEntry 1 }
ntwsApConfRpServpServiceProfileName OBJECT-TYPE
SYNTAX NtwsServiceProfileName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of a Service Profile connected to
this Radio Profile."
::= { ntwsApConfRadioProfServiceProfileEntry 2 }
ntwsApConfRpServpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or
delete an existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.
Only these two values 'createAndGo' and 'destroy'
will be accepted."
::= { ntwsApConfRadioProfServiceProfileEntry 3 }
-- ==================================================
-- Table for Snoop Filters connected to Radio Profile
ntwsApConfRadioProfSnoopFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtwsApConfRadioProfSnoopFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the currently configured connections
between Radio Profiles and Snoop Filters."
::= { ntwsApConfigMibObjects 8 }
ntwsApConfRadioProfSnoopFilterEntry OBJECT-TYPE
SYNTAX NtwsApConfRadioProfSnoopFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Connection between a Radio Profile and a Snoop Filter,
currently configured on the AC."
INDEX { ntwsApConfRpSnoopfRadioProfileName,
ntwsApConfRpSnoopfSnoopFilterName }
::= { ntwsApConfRadioProfSnoopFilterTable 1 }
NtwsApConfRadioProfSnoopFilterEntry ::= SEQUENCE {
ntwsApConfRpSnoopfRadioProfileName NtwsRadioProfileName,
ntwsApConfRpSnoopfSnoopFilterName NtwsSnoopFilterName,
ntwsApConfRpSnoopfRowStatus RowStatus
}
ntwsApConfRpSnoopfRadioProfileName OBJECT-TYPE
SYNTAX NtwsRadioProfileName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of this Radio Profile."
::= { ntwsApConfRadioProfSnoopFilterEntry 1 }
ntwsApConfRpSnoopfSnoopFilterName OBJECT-TYPE
SYNTAX NtwsSnoopFilterName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of a Snoop Filter connected to
this Radio Profile."
::= { ntwsApConfRadioProfSnoopFilterEntry 2 }
ntwsApConfRpSnoopfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or
delete an existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.
Only these two values 'createAndGo' and 'destroy'
will be accepted."
::= { ntwsApConfRadioProfSnoopFilterEntry 3 }
-- ==========================
-- Service Profile table
ntwsApConfServiceProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtwsApConfServiceProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the Service Profiles
currently configured on this AC."
::= { ntwsApConfigMibObjects 9 }
ntwsApConfServiceProfileEntry OBJECT-TYPE
SYNTAX NtwsApConfServiceProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration for a particular Service Profile."
INDEX { ntwsApConfServProfServiceProfileName }
::= { ntwsApConfServiceProfileTable 1 }
NtwsApConfServiceProfileEntry ::= SEQUENCE {
ntwsApConfServProfServiceProfileName NtwsServiceProfileName,
ntwsApConfServProfSsidType NtwsServiceProfileSsidType,
ntwsApConfServProfBeaconEnabled TruthValue,
ntwsApConfServProf11naMode NtwsServiceProfile11nMode,
ntwsApConfServProf11ngMode NtwsServiceProfile11nMode,
ntwsApConfServProf11nShortGuardIntervalEnabled TruthValue,
ntwsApConfServProf11nFrameAggregation NtwsServiceProfile11nFrameAggregationType,
ntwsApConfServProf11nMsduMaxLength NtwsServiceProfile11nMsduMaxLength,
ntwsApConfServProf11nMpduMaxLength NtwsServiceProfile11nMpduMaxLength,
ntwsApConfServProfAuthFallthru NtwsServiceProfileAuthFallthruType,
ntwsApConfServProfWebAAAForm DisplayString,
ntwsApConfServProfSharedKeyAuthEnabled TruthValue,
ntwsApConfServProfWpaIeEnabled TruthValue,
ntwsApConfServProfWpaIeCipherTkipEnabled TruthValue,
ntwsApConfServProfWpaIeCipherCcmpEnabled TruthValue,
ntwsApConfServProfWpaIeCipherWep40Enabled TruthValue,
ntwsApConfServProfWpaIeCipherWep104Enabled TruthValue,
ntwsApConfServProfWpaIeAuthDot1xEnabled TruthValue,
ntwsApConfServProfWpaIeAuthPskEnabled TruthValue,
ntwsApConfServProfRsnIeEnabled TruthValue,
ntwsApConfServProfRsnIeCipherTkipEnabled TruthValue,
ntwsApConfServProfRsnIeCipherCcmpEnabled TruthValue,
ntwsApConfServProfRsnIeCipherWep40Enabled TruthValue,
ntwsApConfServProfRsnIeCipherWep104Enabled TruthValue,
ntwsApConfServProfRsnIeAuthDot1xEnabled TruthValue,
ntwsApConfServProfRsnIeAuthPskEnabled TruthValue,
ntwsApConfServProfTkipMicCountermeasuresTime Unsigned32,
ntwsApConfServProfMaxBandwidthKbps Unsigned32,
ntwsApConfServProfCacMode NtwsServiceProfileCacMode,
ntwsApConfServProfCacSessCount Unsigned32,
ntwsApConfServProfUserIdleTimeout Unsigned32,
ntwsApConfServProfIdleClientProbingEnabled TruthValue,
ntwsApConfServProfShortRetryCount Unsigned32,
ntwsApConfServProfLongRetryCount Unsigned32,
ntwsApConfServProfProxyArpEnabled TruthValue,
ntwsApConfServProfDhcpRestrictEnabled TruthValue,
ntwsApConfServProfNoBroadcastEnabled TruthValue,
ntwsApConfServProfSygateOnDemandEnabled TruthValue,
ntwsApConfServProfEnforceChecksEnabled TruthValue,
ntwsApConfServProfSodaRemediationAcl DisplayString,
ntwsApConfServProfSodaSuccessPage DisplayString,
ntwsApConfServProfSodaFailurePage DisplayString,
ntwsApConfServProfSodaLogoutPage DisplayString,
ntwsApConfServProfSodaAgentDirectory DisplayString,
ntwsApConfServProfWebPortalSessionTimeout Unsigned32,
ntwsApConfServProfWebPortalAcl DisplayString,
ntwsApConfServProfWebPortalLogoutEnabled TruthValue,
ntwsApConfServProfWebPortalLogoutUrl DisplayString,
ntwsApConfServProfKeepInitialVlanEnabled TruthValue,
ntwsApConfServProfMeshModeEnabled TruthValue,
ntwsApConfServProfBridgingEnabled TruthValue,
ntwsApConfServProfLoadBalanceExemptEnabled TruthValue
}
ntwsApConfServProfServiceProfileName OBJECT-TYPE
SYNTAX NtwsServiceProfileName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of this service profile"
::= { ntwsApConfServiceProfileEntry 1 }
ntwsApConfServProfSsidType OBJECT-TYPE
SYNTAX NtwsServiceProfileSsidType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this service profile (clear/crypto)."
::= { ntwsApConfServiceProfileEntry 2 }
ntwsApConfServProfBeaconEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether beacons are enabled
for this service profile."
::= { ntwsApConfServiceProfileEntry 3 }
ntwsApConfServProf11naMode OBJECT-TYPE
SYNTAX NtwsServiceProfile11nMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the 802.11n (na) mode for this service profile."
::= { ntwsApConfServiceProfileEntry 4 }
ntwsApConfServProf11ngMode OBJECT-TYPE
SYNTAX NtwsServiceProfile11nMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the 802.11n (ng) mode for this service profile."
::= { ntwsApConfServiceProfileEntry 5 }
ntwsApConfServProf11nShortGuardIntervalEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether short guard interval is enabled
for this service profile."
::= { ntwsApConfServiceProfileEntry 6 }
ntwsApConfServProf11nFrameAggregation OBJECT-TYPE
SYNTAX NtwsServiceProfile11nFrameAggregationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Frame Aggregation mode
for this service profile."
::= { ntwsApConfServiceProfileEntry 7 }
ntwsApConfServProf11nMsduMaxLength OBJECT-TYPE
SYNTAX NtwsServiceProfile11nMsduMaxLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum MSDU length for this service profile."
::= { ntwsApConfServiceProfileEntry 8 }
ntwsApConfServProf11nMpduMaxLength OBJECT-TYPE
SYNTAX NtwsServiceProfile11nMpduMaxLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum MPDU length for this service profile."
::= { ntwsApConfServiceProfileEntry 9 }
ntwsApConfServProfAuthFallthru OBJECT-TYPE
SYNTAX NtwsServiceProfileAuthFallthruType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication type to be attempted for users who
do not match a 802.1X or MAC authentication rule,
for this service profile."
::= { ntwsApConfServiceProfileEntry 10 }
ntwsApConfServProfWebAAAForm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The custom login page that loads for WebAAA users,
for this service profile."
::= { ntwsApConfServiceProfileEntry 11 }
ntwsApConfServProfSharedKeyAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether shared-key authentication is enabled
for this service profile."
::= { ntwsApConfServiceProfileEntry 12 }
ntwsApConfServProfWpaIeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether WPA IE beaconing is enabled
for this service profile."
::= { ntwsApConfServiceProfileEntry 13 }
ntwsApConfServProfWpaIeCipherTkipEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether TKIP cipher is advertised in WPA IE,
for this service profile."
::= { ntwsApConfServiceProfileEntry 14 }
ntwsApConfServProfWpaIeCipherCcmpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether CCMP cipher is advertised in WPA IE,
for this service profile."
::= { ntwsApConfServiceProfileEntry 15 }
ntwsApConfServProfWpaIeCipherWep40Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether WEP-40 cipher is advertised in WPA IE,
for this service profile."
::= { ntwsApConfServiceProfileEntry 16 }
ntwsApConfServProfWpaIeCipherWep104Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether WEP-104 cipher is advertised in WPA IE,
for this service profile."
::= { ntwsApConfServiceProfileEntry 17 }
ntwsApConfServProfWpaIeAuthDot1xEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether 802.1X authentication is advertised
in WPA IE, for this service profile."
::= { ntwsApConfServiceProfileEntry 18 }
ntwsApConfServProfWpaIeAuthPskEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Pre-Shared Key authentication
is advertised in WPA IE, for this service profile."
::= { ntwsApConfServiceProfileEntry 19 }
ntwsApConfServProfRsnIeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether RSN IE beaconing is enabled
for this service profile."
::= { ntwsApConfServiceProfileEntry 20 }
ntwsApConfServProfRsnIeCipherTkipEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether TKIP cipher is advertised in RSN IE,
for this service profile."
::= { ntwsApConfServiceProfileEntry 21 }
ntwsApConfServProfRsnIeCipherCcmpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether CCMP cipher is advertised in RSN IE,
for this service profile."
::= { ntwsApConfServiceProfileEntry 22 }
ntwsApConfServProfRsnIeCipherWep40Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether WEP-40 cipher is advertised in RSN IE,
for this service profile."
::= { ntwsApConfServiceProfileEntry 23 }
ntwsApConfServProfRsnIeCipherWep104Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether WEP-104 cipher is advertised in RSN IE,
for this service profile."
::= { ntwsApConfServiceProfileEntry 24 }
ntwsApConfServProfRsnIeAuthDot1xEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether 802.1X authentication is advertised
in RSN IE, for this service profile."
::= { ntwsApConfServiceProfileEntry 25 }
ntwsApConfServProfRsnIeAuthPskEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Pre-Shared Key authentication
is advertised in RSN IE, for this service profile."
::= { ntwsApConfServiceProfileEntry 26 }
ntwsApConfServProfTkipMicCountermeasuresTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the TKIP MIC countermeasures time in milliseconds
for this service profile.
This is the length of time that AP radios use
countermeasures if two Message Integrity Code (MIC)
failures occur within 60 seconds."
::= { ntwsApConfServiceProfileEntry 27 }
ntwsApConfServProfMaxBandwidthKbps OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bandwidth limit for this service profile,
in Kbits/second. A value of zero means unlimited."
::= { ntwsApConfServiceProfileEntry 28 }
ntwsApConfServProfCacMode OBJECT-TYPE
SYNTAX NtwsServiceProfileCacMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Call Admission Control (CAC) mode,
for this service profile."
::= { ntwsApConfServiceProfileEntry 29 }
ntwsApConfServProfCacSessCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active sessions a radio can have
when session-based CAC is enabled, for this service profile."
::= { ntwsApConfServiceProfileEntry 30 }
ntwsApConfServProfUserIdleTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds MSS has a session
available for a client not sending data and is not
responding to keepalives (idle-client probes). If
the timer expires, the client session is changed
to the Dissociated state, for this service profile."
::= { ntwsApConfServiceProfileEntry 31 }
ntwsApConfServProfIdleClientProbingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the AC radio sends
a unicast null-data frame to each client every 10 seconds,
for this service profile."
::= { ntwsApConfServiceProfileEntry 32 }
ntwsApConfServProfShortRetryCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a radio can send a short unicast frame
without receiving an acknowledgment,
for this service profile."
::= { ntwsApConfServiceProfileEntry 33 }
ntwsApConfServProfLongRetryCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a radio can send a long unicast frame
without receiving an acknowledgment,
for this service profile."
::= { ntwsApConfServiceProfileEntry 34 }
ntwsApConfServProfProxyArpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether proxy ARP is enabled
for this service profile."
::= { ntwsApConfServiceProfileEntry 35 }
ntwsApConfServProfDhcpRestrictEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether only DHCP traffic is allowed until
a newly associated client has been authenticated
and authorized, for this service profile."
::= { ntwsApConfServiceProfileEntry 36 }
ntwsApConfServProfNoBroadcastEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether broadcast ARP and DHCP packets
are converted to unicast for this service profile."
::= { ntwsApConfServiceProfileEntry 37 }
ntwsApConfServProfSygateOnDemandEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Sygate On-Demand Manager
(SODA Manager) is enabled for this service profile."
::= { ntwsApConfServiceProfileEntry 38 }
ntwsApConfServProfEnforceChecksEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Enforcement of the SODA security checks
is enabled for this service profile."
::= { ntwsApConfServiceProfileEntry 39 }
ntwsApConfServProfSodaRemediationAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remediation page ACL to apply to the client when the
failure page is loaded, for this service profile."
::= { ntwsApConfServiceProfileEntry 40 }
ntwsApConfServProfSodaSuccessPage OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Success page that is displayed on the client when
a client successfully runs the checks
performed by the SODA agent, for this service profile."
::= { ntwsApConfServiceProfileEntry 41 }
ntwsApConfServProfSodaFailurePage OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Failure page that is displayed on the client when
the SODA agent checks fail, for this service profile."
::= { ntwsApConfServiceProfileEntry 42 }
ntwsApConfServProfSodaLogoutPage OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The page to load when a client closes the
SODA virtual desktop and logs out of the network,
for this service profile."
::= { ntwsApConfServiceProfileEntry 43 }
ntwsApConfServProfSodaAgentDirectory OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies a different directory for the
SODA agent files used for this service profile."
::= { ntwsApConfServiceProfileEntry 44 }
ntwsApConfServProfWebPortalSessionTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval, in seconds, for which a Web Portal
WebAAA session remains in the Deassociated state
before being terminated automatically,
for this service profile."
::= { ntwsApConfServiceProfileEntry 45 }
ntwsApConfServProfWebPortalAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of ACL used for filtering traffic for Web Portal
users during authentication, for this service profile."
::= { ntwsApConfServiceProfileEntry 46 }
ntwsApConfServProfWebPortalLogoutEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the Web Portal logout functionality
is enabled for this service profile."
::= { ntwsApConfServiceProfileEntry 47 }
ntwsApConfServProfWebPortalLogoutUrl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Web Portal Logout URL for this service profile."
::= { ntwsApConfServiceProfileEntry 48 }
ntwsApConfServProfKeepInitialVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether, after roaming, the user keeps
the VLAN assigned from the first connection,
for this service profile."
::= { ntwsApConfServiceProfileEntry 49 }
ntwsApConfServProfMeshModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether wireless mesh between APs
is enabled for this service profile."
::= { ntwsApConfServiceProfileEntry 50 }
ntwsApConfServProfBridgingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether wireless bridging of traffic
between APs is enabled for this service profile."
::= { ntwsApConfServiceProfileEntry 51 }
ntwsApConfServProfLoadBalanceExemptEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this service profile is
exempted from load balancing."
::= { ntwsApConfServiceProfileEntry 52 }
-- ==========================
-- Snoop Filter table
ntwsApConfSnoopFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtwsApConfSnoopFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the Snoop Filters
currently configured on this AC."
::= { ntwsApConfigMibObjects 10 }
ntwsApConfSnoopFilterEntry OBJECT-TYPE
SYNTAX NtwsApConfSnoopFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration for a particular Snoop Filter."
INDEX { ntwsApConfSnoopFilterName }
::= { ntwsApConfSnoopFilterTable 1 }
NtwsApConfSnoopFilterEntry ::= SEQUENCE {
ntwsApConfSnoopFilterName NtwsSnoopFilterName,
ntwsApConfSnoopFilterEnabled TruthValue
}
ntwsApConfSnoopFilterName OBJECT-TYPE
SYNTAX NtwsSnoopFilterName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of this snoop filter."
::= { ntwsApConfSnoopFilterEntry 1 }
ntwsApConfSnoopFilterEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this snoop filter is enabled."
::= { ntwsApConfSnoopFilterEntry 2 }
-- ============================================================================
--
-- Conformance
--
ntwsApConfigConformance OBJECT IDENTIFIER ::= { ntwsApConfigMib 2 }
ntwsApConfigCompliances OBJECT IDENTIFIER ::= { ntwsApConfigConformance 1 }
ntwsApConfigGroups OBJECT IDENTIFIER ::= { ntwsApConfigConformance 2 }
-- Compliance
ntwsApConfigCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that implement AP Config MIB."
MODULE -- this module (ntwsApConfigMib)
MANDATORY-GROUPS {
ntwsApConfApConfigTableGroup,
ntwsApConfRadioConfigTableGroup,
ntwsApConfApTemplateConfigTableGroup,
ntwsApConfApTemplateRadioConfigTableGroup,
ntwsApConfRadioProfileTableGroup,
ntwsApConfRadioProfServiceProfileTableGroup,
ntwsApConfRadioProfSnoopFilterTableGroup,
ntwsApConfServiceProfileTableGroup,
ntwsApConfSnoopFilterTableGroup
}
OBJECT ntwsApConfRpServpRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
ntwsApConfRadioProfServiceProfileTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
In release 7.1 only read access is implemented."
OBJECT ntwsApConfRpSnoopfRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
ntwsApConfRadioProfSnoopFilterTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
In release 7.1 only read access is implemented."
::= { ntwsApConfigCompliances 1 }
-- Units of Conformance
ntwsApConfApConfigTableGroup OBJECT-GROUP
OBJECTS {
ntwsApConfApConfigApAttachType,
ntwsApConfApConfigPhysPortNum,
ntwsApConfApConfigApSerialNum,
ntwsApConfApConfigApModelName,
ntwsApConfApConfigFingerprint,
ntwsApConfApConfigBias,
ntwsApConfApConfigApTimeout,
ntwsApConfApConfigApName,
ntwsApConfApConfigContact,
ntwsApConfApConfigLocation,
ntwsApConfApConfigBlinkEnabled,
ntwsApConfApConfigForceImageDownloadEnabled,
ntwsApConfApConfigFirmwareUpgradeEnabled,
ntwsApConfApConfigLocalSwitchingEnabled,
ntwsApConfApConfigPowerMode,
ntwsApConfApConfigLedMode,
ntwsApConfApConfigDescription
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
AP Configuration info in releases 7.1 and greater."
::= { ntwsApConfigGroups 1 }
ntwsApConfRadioConfigTableGroup OBJECT-GROUP
OBJECTS {
ntwsApConfRadioConfigRadioType,
ntwsApConfRadioConfigRadioMode,
ntwsApConfRadioConfigRadioProfileName,
ntwsApConfRadioConfigChannel,
ntwsApConfRadioConfigTxPower,
ntwsApConfRadioConfigAutoTuneMaxTxPower,
ntwsApConfRadioConfigAntennaType,
ntwsApConfRadioConfigAntennaLocation,
ntwsApConfRadioConfigLoadBalancingEnabled,
ntwsApConfRadioConfigLoadBalancingGroup,
ntwsApConfRadioConfigLoadRebalancingEnabled
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Configuration info in releases 7.1 and greater."
::= { ntwsApConfigGroups 2 }
ntwsApConfApTemplateConfigTableGroup OBJECT-GROUP
OBJECTS {
ntwsApConfApTemplConfApTemplateEnabled,
ntwsApConfApTemplConfBias,
ntwsApConfApTemplConfApTimeout,
ntwsApConfApTemplConfBlinkEnabled,
ntwsApConfApTemplConfForceImageDownloadEnabled,
ntwsApConfApTemplConfFirmwareUpgradeEnabled,
ntwsApConfApTemplConfLocalSwitchingEnabled,
ntwsApConfApTemplConfPowerMode,
ntwsApConfApTemplConfLedMode
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
AP Configuration Template info in releases 7.1 and greater."
::= { ntwsApConfigGroups 3 }
ntwsApConfApTemplateRadioConfigTableGroup OBJECT-GROUP
OBJECTS {
ntwsApConfApTemRadioConfRadioMode,
ntwsApConfApTemRadioConfRadioProfileName,
ntwsApConfApTemRadioConfAutoTuneMaxTxPower,
ntwsApConfApTemRadioConfLoadBalancingEnabled,
ntwsApConfApTemRadioConfLoadBalancingGroup,
ntwsApConfApTemRadioConfLoadRebalancingEnabled
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Configuration Template info in releases 7.1 and greater."
::= { ntwsApConfigGroups 4 }
ntwsApConfRadioProfileTableGroup OBJECT-GROUP
OBJECTS {
ntwsApConfRadioProfBeaconInterval,
ntwsApConfRadioProfDtimInterval,
ntwsApConfRadioProfChannelWidth11na,
ntwsApConfRadioProfMaxTxLifetime,
ntwsApConfRadioProfMaxRxLifetime,
ntwsApConfRadioProfRtsThreshold,
ntwsApConfRadioProfFragThreshold,
ntwsApConfRadioProfLongXmitPreambleEnabled,
ntwsApConfRadioProfCountermeasuresMode,
ntwsApConfRadioProfRFScanMode,
ntwsApConfRadioProfRFScanChannelScope,
ntwsApConfRadioProfRFScanCTSEnabled,
ntwsApConfRadioProfAutoTune11aChannelRange,
ntwsApConfRadioProfAutoTuneIgnoreClientsEnabled,
ntwsApConfRadioProfAutoTuneChannelEnabled,
ntwsApConfRadioProfAutoTuneChannelHolddownInterval,
ntwsApConfRadioProfAutoTuneChannelChangeInterval,
ntwsApConfRadioProfAutoTunePowerEnabled,
ntwsApConfRadioProfAutoTunePowerRampInterval,
ntwsApConfRadioProfAutoTunePowerChangeInterval,
ntwsApConfRadioProfFairQueuingEnabled,
ntwsApConfRadioProfCacBackgroundACMandatory,
ntwsApConfRadioProfCacBackgroundMaxUtilization,
ntwsApConfRadioProfCacBackgroundPolicingEnabled,
ntwsApConfRadioProfCacBestEffortACMandatory,
ntwsApConfRadioProfCacBestEffortMaxUtilization,
ntwsApConfRadioProfCacBestEffortPolicingEnabled,
ntwsApConfRadioProfCacVideoACMandatory,
ntwsApConfRadioProfCacVideoMaxUtilization,
ntwsApConfRadioProfCacVideoPolicingEnabled,
ntwsApConfRadioProfCacVoiceACMandatory,
ntwsApConfRadioProfCacVoiceMaxUtilization,
ntwsApConfRadioProfCacVoicePolicingEnabled,
ntwsApConfRadioProfRfidTagEnabled,
ntwsApConfRadioProfWmmPowerSaveEnabled,
ntwsApConfRadioProfRateEnforcementEnabled,
ntwsApConfRadioProfDfsChannelsEnabled
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Profile configuration info in releases 7.1 and greater."
::= { ntwsApConfigGroups 5 }
ntwsApConfRadioProfServiceProfileTableGroup OBJECT-GROUP
OBJECTS {
ntwsApConfRpServpRowStatus
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Service Profiles associated to each Radio Profile
in releases 7.1 and greater."
::= { ntwsApConfigGroups 6 }
ntwsApConfRadioProfSnoopFilterTableGroup OBJECT-GROUP
OBJECTS {
ntwsApConfRpSnoopfRowStatus
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Snoop Filters associated to each Radio Profile
in releases 7.1 and greater."
::= { ntwsApConfigGroups 7 }
ntwsApConfServiceProfileTableGroup OBJECT-GROUP
OBJECTS {
ntwsApConfServProfSsidType,
ntwsApConfServProfBeaconEnabled,
ntwsApConfServProf11naMode,
ntwsApConfServProf11ngMode,
ntwsApConfServProf11nShortGuardIntervalEnabled,
ntwsApConfServProf11nFrameAggregation,
ntwsApConfServProf11nMsduMaxLength,
ntwsApConfServProf11nMpduMaxLength,
ntwsApConfServProfAuthFallthru,
ntwsApConfServProfWebAAAForm,
ntwsApConfServProfSharedKeyAuthEnabled,
ntwsApConfServProfWpaIeEnabled,
ntwsApConfServProfWpaIeCipherTkipEnabled,
ntwsApConfServProfWpaIeCipherCcmpEnabled,
ntwsApConfServProfWpaIeCipherWep40Enabled,
ntwsApConfServProfWpaIeCipherWep104Enabled,
ntwsApConfServProfWpaIeAuthDot1xEnabled,
ntwsApConfServProfWpaIeAuthPskEnabled,
ntwsApConfServProfRsnIeEnabled,
ntwsApConfServProfRsnIeCipherTkipEnabled,
ntwsApConfServProfRsnIeCipherCcmpEnabled,
ntwsApConfServProfRsnIeCipherWep40Enabled,
ntwsApConfServProfRsnIeCipherWep104Enabled,
ntwsApConfServProfRsnIeAuthDot1xEnabled,
ntwsApConfServProfRsnIeAuthPskEnabled,
ntwsApConfServProfTkipMicCountermeasuresTime,
ntwsApConfServProfMaxBandwidthKbps,
ntwsApConfServProfCacMode,
ntwsApConfServProfCacSessCount,
ntwsApConfServProfUserIdleTimeout,
ntwsApConfServProfIdleClientProbingEnabled,
ntwsApConfServProfShortRetryCount,
ntwsApConfServProfLongRetryCount,
ntwsApConfServProfProxyArpEnabled,
ntwsApConfServProfDhcpRestrictEnabled,
ntwsApConfServProfNoBroadcastEnabled,
ntwsApConfServProfSygateOnDemandEnabled,
ntwsApConfServProfEnforceChecksEnabled,
ntwsApConfServProfSodaRemediationAcl,
ntwsApConfServProfSodaSuccessPage,
ntwsApConfServProfSodaFailurePage,
ntwsApConfServProfSodaLogoutPage,
ntwsApConfServProfSodaAgentDirectory,
ntwsApConfServProfWebPortalSessionTimeout,
ntwsApConfServProfWebPortalAcl,
ntwsApConfServProfWebPortalLogoutEnabled,
ntwsApConfServProfWebPortalLogoutUrl,
ntwsApConfServProfKeepInitialVlanEnabled,
ntwsApConfServProfMeshModeEnabled,
ntwsApConfServProfBridgingEnabled,
ntwsApConfServProfLoadBalanceExemptEnabled
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Service Profile configuration info in releases 7.1 and greater."
::= { ntwsApConfigGroups 8 }
ntwsApConfSnoopFilterTableGroup OBJECT-GROUP
OBJECTS {
ntwsApConfSnoopFilterEnabled
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Snoop Filter configuration info in releases 7.1 and greater."
::= { ntwsApConfigGroups 9 }
END
View Git Blame Copy Permalink