NTWS-AP-CONFIG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue FROM SNMPv2-TC NtwsApNum, NtwsApAttachType, NtwsApSerialNum, NtwsApFingerprint, NtwsApBias, NtwsApRadioIndex, NtwsRadioMode, NtwsRadioType, NtwsPowerLevel, NtwsChannelNum, NtwsRadioChannelWidth, NtwsApPowerMode, NtwsRadioAntennaLocation, NtwsApLedMode FROM NTWS-AP-TC NtwsPhysPortNumberOrZero FROM NTWS-BASIC-TC ntwsMibs FROM NTWS-ROOT-MIB; ntwsApConfigMib MODULE-IDENTITY LAST-UPDATED "200911190108Z" ORGANIZATION "Nortel Networks" CONTACT-INFO "www.nortelnetworks.com" DESCRIPTION "AP Configuration objects for Nortel Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2009 Nortel Networks. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "200911190108Z" DESCRIPTION "v1.0.8: Initial version" ::= { ntwsMibs 14 } -- Textual conventions NtwsApTemplateName ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "AP Template Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string." SYNTAX OCTET STRING (SIZE (1..32)) NtwsRadioProfileName ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "Radio Profile Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string." SYNTAX OCTET STRING (SIZE (1..16)) NtwsServiceProfileName ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "Service Profile Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string." SYNTAX OCTET STRING (SIZE (1..32)) NtwsSnoopFilterName ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "Snoop Filter Name, consists of printable ASCII characters between 0x21 (!), and 0x7d (}) with no leading, embedded, or trailing space. Cannot be a zero length string." SYNTAX OCTET STRING (SIZE (1..15)) NtwsServiceProfileSsidType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of Service Types provided on a service profile." SYNTAX INTEGER { clear (1), crypto (2) } NtwsServiceProfile11nMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of 802.11n modes for a service profile." SYNTAX INTEGER { enable (1), disable (2), required (3) } NtwsServiceProfile11nFrameAggregationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of 802.11n frame aggregation types for a service profile." SYNTAX INTEGER { msdu (1), mpdu (2), all (3), disable (4) } NtwsServiceProfile11nMsduMaxLength ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of 802.11n A-MSDU maximum lengths for a service profile." SYNTAX INTEGER { msdu-4k (1), msdu-8k (2) } NtwsServiceProfile11nMpduMaxLength ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of 802.11n A-MPDU maximum lengths for a service profile." SYNTAX INTEGER { mpdu-8k (1), mpdu-16k (2), mpdu-32k (3), mpdu-64k (4) } NtwsServiceProfileAuthFallthruType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of Authentication Fallthrough types for a service profile." SYNTAX INTEGER { none (1), web-auth (2), web-aaa-portal (3), last-resort (4) } NtwsServiceProfileCacMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of Call Admission Control types for a service profile." SYNTAX INTEGER { none (1), session (2), vendor (3) } NtwsRadioProfileCountermeasuresMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the Countermeasure modes for a radio profile." SYNTAX INTEGER { none (1), all (2), rogue (3), configured (4) } NtwsRadioProfileRFScanChannelScope ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of RF scanning channel scopes for a radio profile." SYNTAX INTEGER { operating (1), regulatory (2), all (3) } NtwsRadioProfileAutoTuneChannelRange ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of Auto-Tune channel ranges for a radio profile." SYNTAX INTEGER { all-bands (1), lower-bands (2) } NtwsRadioProfileRFScanMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of RF scanning modes for a radio profile." SYNTAX INTEGER { active (1), passive (2) } -- -- The AP Config MIB Tree -- ntwsApConfigMibObjects OBJECT IDENTIFIER ::= { ntwsApConfigMib 1 } -- Reserved for future scalar objects (high-level configuration info): -- ntwsApConfigGlobalObjects OBJECT IDENTIFIER ::= { ntwsApConfigMibObjects 1 } -- Object definitions -- ================================== -- AP Config table ntwsApConfApConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF NtwsApConfApConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing all the APs currently configured on this AC." ::= { ntwsApConfigMibObjects 2 } ntwsApConfApConfigEntry OBJECT-TYPE SYNTAX NtwsApConfApConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for a particular AP that could be attached to the AC." INDEX { ntwsApConfApConfigApNum } ::= { ntwsApConfApConfigTable 1 } NtwsApConfApConfigEntry ::= SEQUENCE { ntwsApConfApConfigApNum NtwsApNum, ntwsApConfApConfigApAttachType NtwsApAttachType, ntwsApConfApConfigPhysPortNum NtwsPhysPortNumberOrZero, ntwsApConfApConfigApSerialNum NtwsApSerialNum, ntwsApConfApConfigApModelName DisplayString, ntwsApConfApConfigFingerprint NtwsApFingerprint, ntwsApConfApConfigBias NtwsApBias, ntwsApConfApConfigApTimeout Unsigned32, ntwsApConfApConfigApName DisplayString, ntwsApConfApConfigContact DisplayString, ntwsApConfApConfigLocation DisplayString, ntwsApConfApConfigBlinkEnabled TruthValue, ntwsApConfApConfigForceImageDownloadEnabled TruthValue, ntwsApConfApConfigFirmwareUpgradeEnabled TruthValue, ntwsApConfApConfigLocalSwitchingEnabled TruthValue, ntwsApConfApConfigPowerMode NtwsApPowerMode, ntwsApConfApConfigLedMode NtwsApLedMode, ntwsApConfApConfigDescription DisplayString } ntwsApConfApConfigApNum OBJECT-TYPE SYNTAX NtwsApNum MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Number of this AP (administratively assigned)." ::= { ntwsApConfApConfigEntry 1 } ntwsApConfApConfigApAttachType OBJECT-TYPE SYNTAX NtwsApAttachType MAX-ACCESS read-only STATUS current DESCRIPTION "How this AP is attached to the AC (directly or via L2/L3 network)." ::= { ntwsApConfApConfigEntry 2 } ntwsApConfApConfigPhysPortNum OBJECT-TYPE SYNTAX NtwsPhysPortNumberOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the physical port used to attach this AP. Only valid for directly attached APs, otherwise will be zero." ::= { ntwsApConfApConfigEntry 3 } ntwsApConfApConfigApSerialNum OBJECT-TYPE SYNTAX NtwsApSerialNum MAX-ACCESS read-only STATUS current DESCRIPTION "The Serial Number used to identify this AP. Only valid for network attached APs, otherwise will be a zero length string." ::= { ntwsApConfApConfigEntry 4 } ntwsApConfApConfigApModelName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Model name of this AP." ::= { ntwsApConfApConfigEntry 5 } ntwsApConfApConfigFingerprint OBJECT-TYPE SYNTAX NtwsApFingerprint MAX-ACCESS read-only STATUS current DESCRIPTION "The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length string." ::= { ntwsApConfApConfigEntry 6 } ntwsApConfApConfigBias OBJECT-TYPE SYNTAX NtwsApBias MAX-ACCESS read-only STATUS current DESCRIPTION "Bias (high/low/sticky)." ::= { ntwsApConfApConfigEntry 7 } ntwsApConfApConfigApTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The communication timeout for this AP, in seconds." ::= { ntwsApConfApConfigEntry 8 } ntwsApConfApConfigApName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Name for this AP." ::= { ntwsApConfApConfigEntry 9 } ntwsApConfApConfigContact OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Contact information for this AP." ::= { ntwsApConfApConfigEntry 10 } ntwsApConfApConfigLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Location information for this AP." ::= { ntwsApConfApConfigEntry 11 } ntwsApConfApConfigBlinkEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the LED blink mode is enabled on this AP." ::= { ntwsApConfApConfigEntry 12 } ntwsApConfApConfigForceImageDownloadEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this AP is forced to always download an image from the AC upon boot." ::= { ntwsApConfApConfigEntry 13 } ntwsApConfApConfigFirmwareUpgradeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether automatic boot firmware upgrade is enabled on this AP." ::= { ntwsApConfApConfigEntry 14 } ntwsApConfApConfigLocalSwitchingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether local switching is enabled on this AP." ::= { ntwsApConfApConfigEntry 15 } ntwsApConfApConfigPowerMode OBJECT-TYPE SYNTAX NtwsApPowerMode MAX-ACCESS read-only STATUS current DESCRIPTION "The mode in which this AP is supplying power to its radios." ::= { ntwsApConfApConfigEntry 16 } ntwsApConfApConfigLedMode OBJECT-TYPE SYNTAX NtwsApLedMode MAX-ACCESS read-only STATUS current DESCRIPTION "LED Mode (auto/static/off)." ::= { ntwsApConfApConfigEntry 17 } ntwsApConfApConfigDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Description for this AP." ::= { ntwsApConfApConfigEntry 18 } -- ================================== -- Radio Config table ntwsApConfRadioConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF NtwsApConfRadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the radios on all the APs currently configured on this AC." ::= { ntwsApConfigMibObjects 3 } ntwsApConfRadioConfigEntry OBJECT-TYPE SYNTAX NtwsApConfRadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for a particular Radio on a particular AP that could be attached to the AC." INDEX { ntwsApConfRadioConfigApNum, ntwsApConfRadioConfigRadioIndex } ::= { ntwsApConfRadioConfigTable 1 } NtwsApConfRadioConfigEntry ::= SEQUENCE { ntwsApConfRadioConfigApNum NtwsApNum, ntwsApConfRadioConfigRadioIndex NtwsApRadioIndex, ntwsApConfRadioConfigRadioType NtwsRadioType, ntwsApConfRadioConfigRadioMode NtwsRadioMode, ntwsApConfRadioConfigRadioProfileName NtwsRadioProfileName, ntwsApConfRadioConfigChannel NtwsChannelNum, ntwsApConfRadioConfigTxPower NtwsPowerLevel, ntwsApConfRadioConfigAutoTuneMaxTxPower NtwsPowerLevel, ntwsApConfRadioConfigAntennaType DisplayString, ntwsApConfRadioConfigAntennaLocation NtwsRadioAntennaLocation, ntwsApConfRadioConfigLoadBalancingEnabled TruthValue, ntwsApConfRadioConfigLoadBalancingGroup DisplayString, ntwsApConfRadioConfigLoadRebalancingEnabled TruthValue } ntwsApConfRadioConfigApNum OBJECT-TYPE SYNTAX NtwsApNum MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Number of the AP (administratively assigned)." ::= { ntwsApConfRadioConfigEntry 1 } ntwsApConfRadioConfigRadioIndex OBJECT-TYPE SYNTAX NtwsApRadioIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this Radio on the AP." ::= { ntwsApConfRadioConfigEntry 2 } ntwsApConfRadioConfigRadioType OBJECT-TYPE SYNTAX NtwsRadioType MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Type of this radio (typeA, typeB, typeG, typeNA, typeNG)" ::= { ntwsApConfRadioConfigEntry 3 } ntwsApConfRadioConfigRadioMode OBJECT-TYPE SYNTAX NtwsRadioMode MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Mode of this radio (enabled/disabled/sentry)" ::= { ntwsApConfRadioConfigEntry 4 } ntwsApConfRadioConfigRadioProfileName OBJECT-TYPE SYNTAX NtwsRadioProfileName MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the Radio Profile to be applied to this radio" ::= { ntwsApConfRadioConfigEntry 5 } ntwsApConfRadioConfigChannel OBJECT-TYPE SYNTAX NtwsChannelNum MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Channel Number of this radio." ::= { ntwsApConfRadioConfigEntry 6 } ntwsApConfRadioConfigTxPower OBJECT-TYPE SYNTAX NtwsPowerLevel MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Tx Power level of this radio." ::= { ntwsApConfRadioConfigEntry 7 } ntwsApConfRadioConfigAutoTuneMaxTxPower OBJECT-TYPE SYNTAX NtwsPowerLevel MAX-ACCESS read-only STATUS current DESCRIPTION "The Maximum Tx Power that Auto Tune is allowed to set for this radio." ::= { ntwsApConfRadioConfigEntry 8 } ntwsApConfRadioConfigAntennaType OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Antenna Type for this radio." ::= { ntwsApConfRadioConfigEntry 9 } ntwsApConfRadioConfigAntennaLocation OBJECT-TYPE SYNTAX NtwsRadioAntennaLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Antenna Location for this radio." ::= { ntwsApConfRadioConfigEntry 10 } ntwsApConfRadioConfigLoadBalancingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether RF Load Balancing is enabled on this radio." ::= { ntwsApConfRadioConfigEntry 11 } ntwsApConfRadioConfigLoadBalancingGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the RF Load Balancing group that this radio is assigned to." ::= { ntwsApConfRadioConfigEntry 12 } ntwsApConfRadioConfigLoadRebalancingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether RF Load Rebalancing is enabled for this radio." ::= { ntwsApConfRadioConfigEntry 13 } -- ========================================================== -- AP Template main Config table (similar to AP Config table) ntwsApConfApTemplateConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF NtwsApConfApTemplateConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing all the AP Templates currently configured on this AC." ::= { ntwsApConfigMibObjects 4 } ntwsApConfApTemplateConfigEntry OBJECT-TYPE SYNTAX NtwsApConfApTemplateConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Template configuration for APs that could be attached to the AC." INDEX { ntwsApConfApTemplConfApTemplateName } ::= { ntwsApConfApTemplateConfigTable 1 } NtwsApConfApTemplateConfigEntry ::= SEQUENCE { ntwsApConfApTemplConfApTemplateName NtwsApTemplateName, ntwsApConfApTemplConfApTemplateEnabled TruthValue, ntwsApConfApTemplConfBias NtwsApBias, ntwsApConfApTemplConfApTimeout Unsigned32, ntwsApConfApTemplConfBlinkEnabled TruthValue, ntwsApConfApTemplConfForceImageDownloadEnabled TruthValue, ntwsApConfApTemplConfFirmwareUpgradeEnabled TruthValue, ntwsApConfApTemplConfLocalSwitchingEnabled TruthValue, ntwsApConfApTemplConfPowerMode NtwsApPowerMode, ntwsApConfApTemplConfLedMode NtwsApLedMode } ntwsApConfApTemplConfApTemplateName OBJECT-TYPE SYNTAX NtwsApTemplateName MAX-ACCESS not-accessible STATUS current DESCRIPTION "AP Template Name." ::= { ntwsApConfApTemplateConfigEntry 1 } ntwsApConfApTemplConfApTemplateEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this AP Template is Enabled (can be used for bringing up APs)." ::= { ntwsApConfApTemplateConfigEntry 2 } ntwsApConfApTemplConfBias OBJECT-TYPE SYNTAX NtwsApBias MAX-ACCESS read-only STATUS current DESCRIPTION "Bias (high/low/sticky)." ::= { ntwsApConfApTemplateConfigEntry 3 } ntwsApConfApTemplConfApTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The communication timeout for this AP Template, in seconds." ::= { ntwsApConfApTemplateConfigEntry 4 } ntwsApConfApTemplConfBlinkEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the LED blink mode is enabled on this AP Template." ::= { ntwsApConfApTemplateConfigEntry 5 } ntwsApConfApTemplConfForceImageDownloadEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this AP is forced to always download an image from the AC upon boot." ::= { ntwsApConfApTemplateConfigEntry 6 } ntwsApConfApTemplConfFirmwareUpgradeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether automatic boot firmware upgrade is enabled on this AP Template." ::= { ntwsApConfApTemplateConfigEntry 7 } ntwsApConfApTemplConfLocalSwitchingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether local switching is enabled on this AP Template." ::= { ntwsApConfApTemplateConfigEntry 8 } ntwsApConfApTemplConfPowerMode OBJECT-TYPE SYNTAX NtwsApPowerMode MAX-ACCESS read-only STATUS current DESCRIPTION "The mode in which an AP using this Template will be supplying power to its radios." ::= { ntwsApConfApTemplateConfigEntry 9 } ntwsApConfApTemplConfLedMode OBJECT-TYPE SYNTAX NtwsApLedMode MAX-ACCESS read-only STATUS current DESCRIPTION "The LED Mode (auto/static/off) for an AP using this Template." ::= { ntwsApConfApTemplateConfigEntry 10 } -- ============================================================== -- AP Template Radio Config table (similar to Radio Config table) ntwsApConfApTemplateRadioConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF NtwsApConfApTemplateRadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the radios for all the AP Templates currently configured on this AC." ::= { ntwsApConfigMibObjects 5 } ntwsApConfApTemplateRadioConfigEntry OBJECT-TYPE SYNTAX NtwsApConfApTemplateRadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Template configuration for a particular Radio index on an AP Template configured on this AC." INDEX { ntwsApConfApTemRadioConfApTemplateName, ntwsApConfApTemRadioConfRadioIndex } ::= { ntwsApConfApTemplateRadioConfigTable 1 } NtwsApConfApTemplateRadioConfigEntry ::= SEQUENCE { ntwsApConfApTemRadioConfApTemplateName NtwsApTemplateName, ntwsApConfApTemRadioConfRadioIndex NtwsApRadioIndex, ntwsApConfApTemRadioConfRadioMode NtwsRadioMode, ntwsApConfApTemRadioConfRadioProfileName NtwsRadioProfileName, ntwsApConfApTemRadioConfAutoTuneMaxTxPower NtwsPowerLevel, ntwsApConfApTemRadioConfLoadBalancingEnabled TruthValue, ntwsApConfApTemRadioConfLoadBalancingGroup DisplayString, ntwsApConfApTemRadioConfLoadRebalancingEnabled TruthValue } ntwsApConfApTemRadioConfApTemplateName OBJECT-TYPE SYNTAX NtwsApTemplateName MAX-ACCESS not-accessible STATUS current DESCRIPTION "AP Template Name." ::= { ntwsApConfApTemplateRadioConfigEntry 1 } ntwsApConfApTemRadioConfRadioIndex OBJECT-TYPE SYNTAX NtwsApRadioIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this Radio on the AP Template." ::= { ntwsApConfApTemplateRadioConfigEntry 2 } ntwsApConfApTemRadioConfRadioMode OBJECT-TYPE SYNTAX NtwsRadioMode MAX-ACCESS read-only STATUS current DESCRIPTION "The configured mode of a radio using this Template (enabled/disabled/sentry)" ::= { ntwsApConfApTemplateRadioConfigEntry 3 } ntwsApConfApTemRadioConfRadioProfileName OBJECT-TYPE SYNTAX NtwsRadioProfileName MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the Radio Profile to be applied to a radio using this Template" ::= { ntwsApConfApTemplateRadioConfigEntry 4 } ntwsApConfApTemRadioConfAutoTuneMaxTxPower OBJECT-TYPE SYNTAX NtwsPowerLevel MAX-ACCESS read-only STATUS current DESCRIPTION "The Maximum Tx Power that Auto Tune will be allowed to set for a radio using this Template." ::= { ntwsApConfApTemplateRadioConfigEntry 5 } ntwsApConfApTemRadioConfLoadBalancingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether RF Load Balancing will be enabled on a radio using this Template." ::= { ntwsApConfApTemplateRadioConfigEntry 6 } ntwsApConfApTemRadioConfLoadBalancingGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the RF Load Balancing group that a radio using this Template will be assigned to." ::= { ntwsApConfApTemplateRadioConfigEntry 7 } ntwsApConfApTemRadioConfLoadRebalancingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether RF Load Rebalancing will be enabled for a radio using this Template." ::= { ntwsApConfApTemplateRadioConfigEntry 8 } -- ========================== -- Radio Profile table ntwsApConfRadioProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF NtwsApConfRadioProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the Radio Profiles currently configured on this AC." ::= { ntwsApConfigMibObjects 6 } ntwsApConfRadioProfileEntry OBJECT-TYPE SYNTAX NtwsApConfRadioProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for a particular Radio Profile." INDEX { ntwsApConfRadioProfRadioProfileName } ::= { ntwsApConfRadioProfileTable 1 } NtwsApConfRadioProfileEntry ::= SEQUENCE { ntwsApConfRadioProfRadioProfileName NtwsRadioProfileName, ntwsApConfRadioProfBeaconInterval Unsigned32, ntwsApConfRadioProfDtimInterval Unsigned32, ntwsApConfRadioProfChannelWidth11na NtwsRadioChannelWidth, ntwsApConfRadioProfMaxTxLifetime Unsigned32, ntwsApConfRadioProfMaxRxLifetime Unsigned32, ntwsApConfRadioProfRtsThreshold Unsigned32, ntwsApConfRadioProfFragThreshold Unsigned32, ntwsApConfRadioProfLongXmitPreambleEnabled TruthValue, ntwsApConfRadioProfCountermeasuresMode NtwsRadioProfileCountermeasuresMode, ntwsApConfRadioProfRFScanMode NtwsRadioProfileRFScanMode, ntwsApConfRadioProfRFScanChannelScope NtwsRadioProfileRFScanChannelScope, ntwsApConfRadioProfRFScanCTSEnabled TruthValue, ntwsApConfRadioProfAutoTune11aChannelRange NtwsRadioProfileAutoTuneChannelRange, ntwsApConfRadioProfAutoTuneIgnoreClientsEnabled TruthValue, ntwsApConfRadioProfAutoTuneChannelEnabled TruthValue, ntwsApConfRadioProfAutoTuneChannelHolddownInterval Unsigned32, ntwsApConfRadioProfAutoTuneChannelChangeInterval Unsigned32, ntwsApConfRadioProfAutoTunePowerEnabled TruthValue, ntwsApConfRadioProfAutoTunePowerRampInterval Unsigned32, ntwsApConfRadioProfAutoTunePowerChangeInterval Unsigned32, ntwsApConfRadioProfFairQueuingEnabled TruthValue, ntwsApConfRadioProfCacBackgroundACMandatory TruthValue, ntwsApConfRadioProfCacBackgroundMaxUtilization Unsigned32, ntwsApConfRadioProfCacBackgroundPolicingEnabled TruthValue, ntwsApConfRadioProfCacBestEffortACMandatory TruthValue, ntwsApConfRadioProfCacBestEffortMaxUtilization Unsigned32, ntwsApConfRadioProfCacBestEffortPolicingEnabled TruthValue, ntwsApConfRadioProfCacVideoACMandatory TruthValue, ntwsApConfRadioProfCacVideoMaxUtilization Unsigned32, ntwsApConfRadioProfCacVideoPolicingEnabled TruthValue, ntwsApConfRadioProfCacVoiceACMandatory TruthValue, ntwsApConfRadioProfCacVoiceMaxUtilization Unsigned32, ntwsApConfRadioProfCacVoicePolicingEnabled TruthValue, ntwsApConfRadioProfRfidTagEnabled TruthValue, ntwsApConfRadioProfWmmPowerSaveEnabled TruthValue, ntwsApConfRadioProfRateEnforcementEnabled TruthValue, ntwsApConfRadioProfDfsChannelsEnabled TruthValue } ntwsApConfRadioProfRadioProfileName OBJECT-TYPE SYNTAX NtwsRadioProfileName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of this radio profile." ::= { ntwsApConfRadioProfileEntry 1 } ntwsApConfRadioProfBeaconInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Beacon Interval, time in thousandths of a second, for this radio profile." ::= { ntwsApConfRadioProfileEntry 2 } ntwsApConfRadioProfDtimInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times after every beacon that each AP radio in a radio profile sends a delivery traffic indication map (DTIM), for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 3 } ntwsApConfRadioProfChannelWidth11na OBJECT-TYPE SYNTAX NtwsRadioChannelWidth MAX-ACCESS read-only STATUS current DESCRIPTION "802.11n Channel Width for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 4 } ntwsApConfRadioProfMaxTxLifetime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum transmit threshold for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 5 } ntwsApConfRadioProfMaxRxLifetime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum receive threshold for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 6 } ntwsApConfRadioProfRtsThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The RTS threshold for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 7 } ntwsApConfRadioProfFragThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The fragmentation threshold for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 8 } ntwsApConfRadioProfLongXmitPreambleEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether an 802.11b/g AP radio using this radio profile transmits Long Preamble." ::= { ntwsApConfRadioProfileEntry 9 } ntwsApConfRadioProfCountermeasuresMode OBJECT-TYPE SYNTAX NtwsRadioProfileCountermeasuresMode MAX-ACCESS read-only STATUS current DESCRIPTION "Countermeasures Mode for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 10 } ntwsApConfRadioProfRFScanMode OBJECT-TYPE SYNTAX NtwsRadioProfileRFScanMode MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scanning Mode for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 11 } ntwsApConfRadioProfRFScanChannelScope OBJECT-TYPE SYNTAX NtwsRadioProfileRFScanChannelScope MAX-ACCESS read-only STATUS current DESCRIPTION "RF scanning Channel Scope for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 12 } ntwsApConfRadioProfRFScanCTSEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the AP radios using this radio profile send CTS To Self packet before going off channel." ::= { ntwsApConfRadioProfileEntry 13 } ntwsApConfRadioProfAutoTune11aChannelRange OBJECT-TYPE SYNTAX NtwsRadioProfileAutoTuneChannelRange MAX-ACCESS read-only STATUS current DESCRIPTION "The allowable 802.11a Channel Range used by Auto-Tune for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 14 } ntwsApConfRadioProfAutoTuneIgnoreClientsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the AP radios using this radio profile Ignore Client connections in Auto-Tune channel selections." ::= { ntwsApConfRadioProfileEntry 15 } ntwsApConfRadioProfAutoTuneChannelEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Channel Auto-Tuning is enabled for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 16 } ntwsApConfRadioProfAutoTuneChannelHolddownInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Interval (in seconds) between Channel changes due to Auto-Tuning, for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 17 } ntwsApConfRadioProfAutoTuneChannelChangeInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Channel for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 18 } ntwsApConfRadioProfAutoTunePowerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Power Auto-Tuning is enabled for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 19 } ntwsApConfRadioProfAutoTunePowerRampInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Interval (in seconds) between Power changes due to Auto-Tuning, for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 20 } ntwsApConfRadioProfAutoTunePowerChangeInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Power for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 21 } ntwsApConfRadioProfFairQueuingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether weighted Fair Queuing is enabled for this radio profile." ::= { ntwsApConfRadioProfileEntry 22 } ntwsApConfRadioProfCacBackgroundACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Admission Control for Background traffic is Mandatory for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 23 } ntwsApConfRadioProfCacBackgroundMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum admission control limit for Background traffic, for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 24 } ntwsApConfRadioProfCacBackgroundPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that admission control Policing for Background traffic is enabled, for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 25 } ntwsApConfRadioProfCacBestEffortACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that Admission Control for Best Effort traffic is Mandatory for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 26 } ntwsApConfRadioProfCacBestEffortMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum admission control limit for Best Effort traffic, for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 27 } ntwsApConfRadioProfCacBestEffortPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that admission control Policing for Best Effort traffic is enabled, for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 28 } ntwsApConfRadioProfCacVideoACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that Admission Control for Video traffic is Mandatory for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 29 } ntwsApConfRadioProfCacVideoMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum admission control limit for Video traffic, for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 30 } ntwsApConfRadioProfCacVideoPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that admission control Policing for Video traffic is enabled, for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 31 } ntwsApConfRadioProfCacVoiceACMandatory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that Admission Control for Voice traffic is Mandatory for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 32 } ntwsApConfRadioProfCacVoiceMaxUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum admission control limit for Voice traffic, for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 33 } ntwsApConfRadioProfCacVoicePolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that admission control Policing for Voice traffic is enabled, for the AP radios using this radio profile." ::= { ntwsApConfRadioProfileEntry 34 } ntwsApConfRadioProfRfidTagEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether an AP radio using this radio profile is enabled to function as location receivers in an AeroScout Visibility System." ::= { ntwsApConfRadioProfileEntry 35 } ntwsApConfRadioProfWmmPowerSaveEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the AP radios using this radio profile enable power save mode on WMM clients." ::= { ntwsApConfRadioProfileEntry 36 } ntwsApConfRadioProfRateEnforcementEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether data rates are enforced for the AP radios using this radio profile, which means that a connecting client must transmit at one of the mandatory or standard rates in order to associate with the AP." ::= { ntwsApConfRadioProfileEntry 37 } ntwsApConfRadioProfDfsChannelsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the AP radios using this radio profile use DFS channels to meet regulatory requirements." ::= { ntwsApConfRadioProfileEntry 38 } -- ===================================================== -- Table for Service Profiles connected to Radio Profile ntwsApConfRadioProfServiceProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF NtwsApConfRadioProfServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the currently configured connections between Radio Profiles and Service Profiles." ::= { ntwsApConfigMibObjects 7 } ntwsApConfRadioProfServiceProfileEntry OBJECT-TYPE SYNTAX NtwsApConfRadioProfServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Connection between a Radio Profile and a Service Profile, currently configured on the AC." INDEX { ntwsApConfRpServpRadioProfileName, ntwsApConfRpServpServiceProfileName } ::= { ntwsApConfRadioProfServiceProfileTable 1 } NtwsApConfRadioProfServiceProfileEntry ::= SEQUENCE { ntwsApConfRpServpRadioProfileName NtwsRadioProfileName, ntwsApConfRpServpServiceProfileName NtwsServiceProfileName, ntwsApConfRpServpRowStatus RowStatus } ntwsApConfRpServpRadioProfileName OBJECT-TYPE SYNTAX NtwsRadioProfileName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of this Radio Profile." ::= { ntwsApConfRadioProfServiceProfileEntry 1 } ntwsApConfRpServpServiceProfileName OBJECT-TYPE SYNTAX NtwsServiceProfileName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of a Service Profile connected to this Radio Profile." ::= { ntwsApConfRadioProfServiceProfileEntry 2 } ntwsApConfRpServpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted." ::= { ntwsApConfRadioProfServiceProfileEntry 3 } -- ================================================== -- Table for Snoop Filters connected to Radio Profile ntwsApConfRadioProfSnoopFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF NtwsApConfRadioProfSnoopFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the currently configured connections between Radio Profiles and Snoop Filters." ::= { ntwsApConfigMibObjects 8 } ntwsApConfRadioProfSnoopFilterEntry OBJECT-TYPE SYNTAX NtwsApConfRadioProfSnoopFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Connection between a Radio Profile and a Snoop Filter, currently configured on the AC." INDEX { ntwsApConfRpSnoopfRadioProfileName, ntwsApConfRpSnoopfSnoopFilterName } ::= { ntwsApConfRadioProfSnoopFilterTable 1 } NtwsApConfRadioProfSnoopFilterEntry ::= SEQUENCE { ntwsApConfRpSnoopfRadioProfileName NtwsRadioProfileName, ntwsApConfRpSnoopfSnoopFilterName NtwsSnoopFilterName, ntwsApConfRpSnoopfRowStatus RowStatus } ntwsApConfRpSnoopfRadioProfileName OBJECT-TYPE SYNTAX NtwsRadioProfileName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of this Radio Profile." ::= { ntwsApConfRadioProfSnoopFilterEntry 1 } ntwsApConfRpSnoopfSnoopFilterName OBJECT-TYPE SYNTAX NtwsSnoopFilterName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of a Snoop Filter connected to this Radio Profile." ::= { ntwsApConfRadioProfSnoopFilterEntry 2 } ntwsApConfRpSnoopfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted." ::= { ntwsApConfRadioProfSnoopFilterEntry 3 } -- ========================== -- Service Profile table ntwsApConfServiceProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF NtwsApConfServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the Service Profiles currently configured on this AC." ::= { ntwsApConfigMibObjects 9 } ntwsApConfServiceProfileEntry OBJECT-TYPE SYNTAX NtwsApConfServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for a particular Service Profile." INDEX { ntwsApConfServProfServiceProfileName } ::= { ntwsApConfServiceProfileTable 1 } NtwsApConfServiceProfileEntry ::= SEQUENCE { ntwsApConfServProfServiceProfileName NtwsServiceProfileName, ntwsApConfServProfSsidType NtwsServiceProfileSsidType, ntwsApConfServProfBeaconEnabled TruthValue, ntwsApConfServProf11naMode NtwsServiceProfile11nMode, ntwsApConfServProf11ngMode NtwsServiceProfile11nMode, ntwsApConfServProf11nShortGuardIntervalEnabled TruthValue, ntwsApConfServProf11nFrameAggregation NtwsServiceProfile11nFrameAggregationType, ntwsApConfServProf11nMsduMaxLength NtwsServiceProfile11nMsduMaxLength, ntwsApConfServProf11nMpduMaxLength NtwsServiceProfile11nMpduMaxLength, ntwsApConfServProfAuthFallthru NtwsServiceProfileAuthFallthruType, ntwsApConfServProfWebAAAForm DisplayString, ntwsApConfServProfSharedKeyAuthEnabled TruthValue, ntwsApConfServProfWpaIeEnabled TruthValue, ntwsApConfServProfWpaIeCipherTkipEnabled TruthValue, ntwsApConfServProfWpaIeCipherCcmpEnabled TruthValue, ntwsApConfServProfWpaIeCipherWep40Enabled TruthValue, ntwsApConfServProfWpaIeCipherWep104Enabled TruthValue, ntwsApConfServProfWpaIeAuthDot1xEnabled TruthValue, ntwsApConfServProfWpaIeAuthPskEnabled TruthValue, ntwsApConfServProfRsnIeEnabled TruthValue, ntwsApConfServProfRsnIeCipherTkipEnabled TruthValue, ntwsApConfServProfRsnIeCipherCcmpEnabled TruthValue, ntwsApConfServProfRsnIeCipherWep40Enabled TruthValue, ntwsApConfServProfRsnIeCipherWep104Enabled TruthValue, ntwsApConfServProfRsnIeAuthDot1xEnabled TruthValue, ntwsApConfServProfRsnIeAuthPskEnabled TruthValue, ntwsApConfServProfTkipMicCountermeasuresTime Unsigned32, ntwsApConfServProfMaxBandwidthKbps Unsigned32, ntwsApConfServProfCacMode NtwsServiceProfileCacMode, ntwsApConfServProfCacSessCount Unsigned32, ntwsApConfServProfUserIdleTimeout Unsigned32, ntwsApConfServProfIdleClientProbingEnabled TruthValue, ntwsApConfServProfShortRetryCount Unsigned32, ntwsApConfServProfLongRetryCount Unsigned32, ntwsApConfServProfProxyArpEnabled TruthValue, ntwsApConfServProfDhcpRestrictEnabled TruthValue, ntwsApConfServProfNoBroadcastEnabled TruthValue, ntwsApConfServProfSygateOnDemandEnabled TruthValue, ntwsApConfServProfEnforceChecksEnabled TruthValue, ntwsApConfServProfSodaRemediationAcl DisplayString, ntwsApConfServProfSodaSuccessPage DisplayString, ntwsApConfServProfSodaFailurePage DisplayString, ntwsApConfServProfSodaLogoutPage DisplayString, ntwsApConfServProfSodaAgentDirectory DisplayString, ntwsApConfServProfWebPortalSessionTimeout Unsigned32, ntwsApConfServProfWebPortalAcl DisplayString, ntwsApConfServProfWebPortalLogoutEnabled TruthValue, ntwsApConfServProfWebPortalLogoutUrl DisplayString, ntwsApConfServProfKeepInitialVlanEnabled TruthValue, ntwsApConfServProfMeshModeEnabled TruthValue, ntwsApConfServProfBridgingEnabled TruthValue, ntwsApConfServProfLoadBalanceExemptEnabled TruthValue } ntwsApConfServProfServiceProfileName OBJECT-TYPE SYNTAX NtwsServiceProfileName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of this service profile" ::= { ntwsApConfServiceProfileEntry 1 } ntwsApConfServProfSsidType OBJECT-TYPE SYNTAX NtwsServiceProfileSsidType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this service profile (clear/crypto)." ::= { ntwsApConfServiceProfileEntry 2 } ntwsApConfServProfBeaconEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether beacons are enabled for this service profile." ::= { ntwsApConfServiceProfileEntry 3 } ntwsApConfServProf11naMode OBJECT-TYPE SYNTAX NtwsServiceProfile11nMode MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the 802.11n (na) mode for this service profile." ::= { ntwsApConfServiceProfileEntry 4 } ntwsApConfServProf11ngMode OBJECT-TYPE SYNTAX NtwsServiceProfile11nMode MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the 802.11n (ng) mode for this service profile." ::= { ntwsApConfServiceProfileEntry 5 } ntwsApConfServProf11nShortGuardIntervalEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether short guard interval is enabled for this service profile." ::= { ntwsApConfServiceProfileEntry 6 } ntwsApConfServProf11nFrameAggregation OBJECT-TYPE SYNTAX NtwsServiceProfile11nFrameAggregationType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Frame Aggregation mode for this service profile." ::= { ntwsApConfServiceProfileEntry 7 } ntwsApConfServProf11nMsduMaxLength OBJECT-TYPE SYNTAX NtwsServiceProfile11nMsduMaxLength MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum MSDU length for this service profile." ::= { ntwsApConfServiceProfileEntry 8 } ntwsApConfServProf11nMpduMaxLength OBJECT-TYPE SYNTAX NtwsServiceProfile11nMpduMaxLength MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum MPDU length for this service profile." ::= { ntwsApConfServiceProfileEntry 9 } ntwsApConfServProfAuthFallthru OBJECT-TYPE SYNTAX NtwsServiceProfileAuthFallthruType MAX-ACCESS read-only STATUS current DESCRIPTION "The authentication type to be attempted for users who do not match a 802.1X or MAC authentication rule, for this service profile." ::= { ntwsApConfServiceProfileEntry 10 } ntwsApConfServProfWebAAAForm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The custom login page that loads for WebAAA users, for this service profile." ::= { ntwsApConfServiceProfileEntry 11 } ntwsApConfServProfSharedKeyAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether shared-key authentication is enabled for this service profile." ::= { ntwsApConfServiceProfileEntry 12 } ntwsApConfServProfWpaIeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether WPA IE beaconing is enabled for this service profile." ::= { ntwsApConfServiceProfileEntry 13 } ntwsApConfServProfWpaIeCipherTkipEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether TKIP cipher is advertised in WPA IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 14 } ntwsApConfServProfWpaIeCipherCcmpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether CCMP cipher is advertised in WPA IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 15 } ntwsApConfServProfWpaIeCipherWep40Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether WEP-40 cipher is advertised in WPA IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 16 } ntwsApConfServProfWpaIeCipherWep104Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether WEP-104 cipher is advertised in WPA IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 17 } ntwsApConfServProfWpaIeAuthDot1xEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether 802.1X authentication is advertised in WPA IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 18 } ntwsApConfServProfWpaIeAuthPskEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Pre-Shared Key authentication is advertised in WPA IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 19 } ntwsApConfServProfRsnIeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether RSN IE beaconing is enabled for this service profile." ::= { ntwsApConfServiceProfileEntry 20 } ntwsApConfServProfRsnIeCipherTkipEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether TKIP cipher is advertised in RSN IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 21 } ntwsApConfServProfRsnIeCipherCcmpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether CCMP cipher is advertised in RSN IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 22 } ntwsApConfServProfRsnIeCipherWep40Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether WEP-40 cipher is advertised in RSN IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 23 } ntwsApConfServProfRsnIeCipherWep104Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether WEP-104 cipher is advertised in RSN IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 24 } ntwsApConfServProfRsnIeAuthDot1xEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether 802.1X authentication is advertised in RSN IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 25 } ntwsApConfServProfRsnIeAuthPskEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Pre-Shared Key authentication is advertised in RSN IE, for this service profile." ::= { ntwsApConfServiceProfileEntry 26 } ntwsApConfServProfTkipMicCountermeasuresTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the TKIP MIC countermeasures time in milliseconds for this service profile. This is the length of time that AP radios use countermeasures if two Message Integrity Code (MIC) failures occur within 60 seconds." ::= { ntwsApConfServiceProfileEntry 27 } ntwsApConfServProfMaxBandwidthKbps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth limit for this service profile, in Kbits/second. A value of zero means unlimited." ::= { ntwsApConfServiceProfileEntry 28 } ntwsApConfServProfCacMode OBJECT-TYPE SYNTAX NtwsServiceProfileCacMode MAX-ACCESS read-only STATUS current DESCRIPTION "The Call Admission Control (CAC) mode, for this service profile." ::= { ntwsApConfServiceProfileEntry 29 } ntwsApConfServProfCacSessCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of active sessions a radio can have when session-based CAC is enabled, for this service profile." ::= { ntwsApConfServiceProfileEntry 30 } ntwsApConfServProfUserIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds MSS has a session available for a client not sending data and is not responding to keepalives (idle-client probes). If the timer expires, the client session is changed to the Dissociated state, for this service profile." ::= { ntwsApConfServiceProfileEntry 31 } ntwsApConfServProfIdleClientProbingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the AC radio sends a unicast null-data frame to each client every 10 seconds, for this service profile." ::= { ntwsApConfServiceProfileEntry 32 } ntwsApConfServProfShortRetryCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a radio can send a short unicast frame without receiving an acknowledgment, for this service profile." ::= { ntwsApConfServiceProfileEntry 33 } ntwsApConfServProfLongRetryCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a radio can send a long unicast frame without receiving an acknowledgment, for this service profile." ::= { ntwsApConfServiceProfileEntry 34 } ntwsApConfServProfProxyArpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether proxy ARP is enabled for this service profile." ::= { ntwsApConfServiceProfileEntry 35 } ntwsApConfServProfDhcpRestrictEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether only DHCP traffic is allowed until a newly associated client has been authenticated and authorized, for this service profile." ::= { ntwsApConfServiceProfileEntry 36 } ntwsApConfServProfNoBroadcastEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether broadcast ARP and DHCP packets are converted to unicast for this service profile." ::= { ntwsApConfServiceProfileEntry 37 } ntwsApConfServProfSygateOnDemandEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Sygate On-Demand Manager (SODA Manager) is enabled for this service profile." ::= { ntwsApConfServiceProfileEntry 38 } ntwsApConfServProfEnforceChecksEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Enforcement of the SODA security checks is enabled for this service profile." ::= { ntwsApConfServiceProfileEntry 39 } ntwsApConfServProfSodaRemediationAcl OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Remediation page ACL to apply to the client when the failure page is loaded, for this service profile." ::= { ntwsApConfServiceProfileEntry 40 } ntwsApConfServProfSodaSuccessPage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Success page that is displayed on the client when a client successfully runs the checks performed by the SODA agent, for this service profile." ::= { ntwsApConfServiceProfileEntry 41 } ntwsApConfServProfSodaFailurePage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Failure page that is displayed on the client when the SODA agent checks fail, for this service profile." ::= { ntwsApConfServiceProfileEntry 42 } ntwsApConfServProfSodaLogoutPage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The page to load when a client closes the SODA virtual desktop and logs out of the network, for this service profile." ::= { ntwsApConfServiceProfileEntry 43 } ntwsApConfServProfSodaAgentDirectory OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies a different directory for the SODA agent files used for this service profile." ::= { ntwsApConfServiceProfileEntry 44 } ntwsApConfServProfWebPortalSessionTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval, in seconds, for which a Web Portal WebAAA session remains in the Deassociated state before being terminated automatically, for this service profile." ::= { ntwsApConfServiceProfileEntry 45 } ntwsApConfServProfWebPortalAcl OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of ACL used for filtering traffic for Web Portal users during authentication, for this service profile." ::= { ntwsApConfServiceProfileEntry 46 } ntwsApConfServProfWebPortalLogoutEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Web Portal logout functionality is enabled for this service profile." ::= { ntwsApConfServiceProfileEntry 47 } ntwsApConfServProfWebPortalLogoutUrl OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Web Portal Logout URL for this service profile." ::= { ntwsApConfServiceProfileEntry 48 } ntwsApConfServProfKeepInitialVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether, after roaming, the user keeps the VLAN assigned from the first connection, for this service profile." ::= { ntwsApConfServiceProfileEntry 49 } ntwsApConfServProfMeshModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether wireless mesh between APs is enabled for this service profile." ::= { ntwsApConfServiceProfileEntry 50 } ntwsApConfServProfBridgingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether wireless bridging of traffic between APs is enabled for this service profile." ::= { ntwsApConfServiceProfileEntry 51 } ntwsApConfServProfLoadBalanceExemptEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this service profile is exempted from load balancing." ::= { ntwsApConfServiceProfileEntry 52 } -- ========================== -- Snoop Filter table ntwsApConfSnoopFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF NtwsApConfSnoopFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the Snoop Filters currently configured on this AC." ::= { ntwsApConfigMibObjects 10 } ntwsApConfSnoopFilterEntry OBJECT-TYPE SYNTAX NtwsApConfSnoopFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for a particular Snoop Filter." INDEX { ntwsApConfSnoopFilterName } ::= { ntwsApConfSnoopFilterTable 1 } NtwsApConfSnoopFilterEntry ::= SEQUENCE { ntwsApConfSnoopFilterName NtwsSnoopFilterName, ntwsApConfSnoopFilterEnabled TruthValue } ntwsApConfSnoopFilterName OBJECT-TYPE SYNTAX NtwsSnoopFilterName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of this snoop filter." ::= { ntwsApConfSnoopFilterEntry 1 } ntwsApConfSnoopFilterEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this snoop filter is enabled." ::= { ntwsApConfSnoopFilterEntry 2 } -- ============================================================================ -- -- Conformance -- ntwsApConfigConformance OBJECT IDENTIFIER ::= { ntwsApConfigMib 2 } ntwsApConfigCompliances OBJECT IDENTIFIER ::= { ntwsApConfigConformance 1 } ntwsApConfigGroups OBJECT IDENTIFIER ::= { ntwsApConfigConformance 2 } -- Compliance ntwsApConfigCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that implement AP Config MIB." MODULE -- this module (ntwsApConfigMib) MANDATORY-GROUPS { ntwsApConfApConfigTableGroup, ntwsApConfRadioConfigTableGroup, ntwsApConfApTemplateConfigTableGroup, ntwsApConfApTemplateRadioConfigTableGroup, ntwsApConfRadioProfileTableGroup, ntwsApConfRadioProfServiceProfileTableGroup, ntwsApConfRadioProfSnoopFilterTableGroup, ntwsApConfServiceProfileTableGroup, ntwsApConfSnoopFilterTableGroup } OBJECT ntwsApConfRpServpRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the ntwsApConfRadioProfServiceProfileTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. In release 7.1 only read access is implemented." OBJECT ntwsApConfRpSnoopfRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the ntwsApConfRadioProfSnoopFilterTable is not required. Support of the values notInService(2), notReady(3), createAndGo(4), createAndWait(5), and destroy(6) is not required. Even if create/delete access is supported, the states notInService(2), notReady(3) and createAndWait(5) need not be supported. In release 7.1 only read access is implemented." ::= { ntwsApConfigCompliances 1 } -- Units of Conformance ntwsApConfApConfigTableGroup OBJECT-GROUP OBJECTS { ntwsApConfApConfigApAttachType, ntwsApConfApConfigPhysPortNum, ntwsApConfApConfigApSerialNum, ntwsApConfApConfigApModelName, ntwsApConfApConfigFingerprint, ntwsApConfApConfigBias, ntwsApConfApConfigApTimeout, ntwsApConfApConfigApName, ntwsApConfApConfigContact, ntwsApConfApConfigLocation, ntwsApConfApConfigBlinkEnabled, ntwsApConfApConfigForceImageDownloadEnabled, ntwsApConfApConfigFirmwareUpgradeEnabled, ntwsApConfApConfigLocalSwitchingEnabled, ntwsApConfApConfigPowerMode, ntwsApConfApConfigLedMode, ntwsApConfApConfigDescription } STATUS current DESCRIPTION "Group of columnar objects implemented to provide AP Configuration info in releases 7.1 and greater." ::= { ntwsApConfigGroups 1 } ntwsApConfRadioConfigTableGroup OBJECT-GROUP OBJECTS { ntwsApConfRadioConfigRadioType, ntwsApConfRadioConfigRadioMode, ntwsApConfRadioConfigRadioProfileName, ntwsApConfRadioConfigChannel, ntwsApConfRadioConfigTxPower, ntwsApConfRadioConfigAutoTuneMaxTxPower, ntwsApConfRadioConfigAntennaType, ntwsApConfRadioConfigAntennaLocation, ntwsApConfRadioConfigLoadBalancingEnabled, ntwsApConfRadioConfigLoadBalancingGroup, ntwsApConfRadioConfigLoadRebalancingEnabled } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Radio Configuration info in releases 7.1 and greater." ::= { ntwsApConfigGroups 2 } ntwsApConfApTemplateConfigTableGroup OBJECT-GROUP OBJECTS { ntwsApConfApTemplConfApTemplateEnabled, ntwsApConfApTemplConfBias, ntwsApConfApTemplConfApTimeout, ntwsApConfApTemplConfBlinkEnabled, ntwsApConfApTemplConfForceImageDownloadEnabled, ntwsApConfApTemplConfFirmwareUpgradeEnabled, ntwsApConfApTemplConfLocalSwitchingEnabled, ntwsApConfApTemplConfPowerMode, ntwsApConfApTemplConfLedMode } STATUS current DESCRIPTION "Group of columnar objects implemented to provide AP Configuration Template info in releases 7.1 and greater." ::= { ntwsApConfigGroups 3 } ntwsApConfApTemplateRadioConfigTableGroup OBJECT-GROUP OBJECTS { ntwsApConfApTemRadioConfRadioMode, ntwsApConfApTemRadioConfRadioProfileName, ntwsApConfApTemRadioConfAutoTuneMaxTxPower, ntwsApConfApTemRadioConfLoadBalancingEnabled, ntwsApConfApTemRadioConfLoadBalancingGroup, ntwsApConfApTemRadioConfLoadRebalancingEnabled } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Radio Configuration Template info in releases 7.1 and greater." ::= { ntwsApConfigGroups 4 } ntwsApConfRadioProfileTableGroup OBJECT-GROUP OBJECTS { ntwsApConfRadioProfBeaconInterval, ntwsApConfRadioProfDtimInterval, ntwsApConfRadioProfChannelWidth11na, ntwsApConfRadioProfMaxTxLifetime, ntwsApConfRadioProfMaxRxLifetime, ntwsApConfRadioProfRtsThreshold, ntwsApConfRadioProfFragThreshold, ntwsApConfRadioProfLongXmitPreambleEnabled, ntwsApConfRadioProfCountermeasuresMode, ntwsApConfRadioProfRFScanMode, ntwsApConfRadioProfRFScanChannelScope, ntwsApConfRadioProfRFScanCTSEnabled, ntwsApConfRadioProfAutoTune11aChannelRange, ntwsApConfRadioProfAutoTuneIgnoreClientsEnabled, ntwsApConfRadioProfAutoTuneChannelEnabled, ntwsApConfRadioProfAutoTuneChannelHolddownInterval, ntwsApConfRadioProfAutoTuneChannelChangeInterval, ntwsApConfRadioProfAutoTunePowerEnabled, ntwsApConfRadioProfAutoTunePowerRampInterval, ntwsApConfRadioProfAutoTunePowerChangeInterval, ntwsApConfRadioProfFairQueuingEnabled, ntwsApConfRadioProfCacBackgroundACMandatory, ntwsApConfRadioProfCacBackgroundMaxUtilization, ntwsApConfRadioProfCacBackgroundPolicingEnabled, ntwsApConfRadioProfCacBestEffortACMandatory, ntwsApConfRadioProfCacBestEffortMaxUtilization, ntwsApConfRadioProfCacBestEffortPolicingEnabled, ntwsApConfRadioProfCacVideoACMandatory, ntwsApConfRadioProfCacVideoMaxUtilization, ntwsApConfRadioProfCacVideoPolicingEnabled, ntwsApConfRadioProfCacVoiceACMandatory, ntwsApConfRadioProfCacVoiceMaxUtilization, ntwsApConfRadioProfCacVoicePolicingEnabled, ntwsApConfRadioProfRfidTagEnabled, ntwsApConfRadioProfWmmPowerSaveEnabled, ntwsApConfRadioProfRateEnforcementEnabled, ntwsApConfRadioProfDfsChannelsEnabled } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Radio Profile configuration info in releases 7.1 and greater." ::= { ntwsApConfigGroups 5 } ntwsApConfRadioProfServiceProfileTableGroup OBJECT-GROUP OBJECTS { ntwsApConfRpServpRowStatus } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Service Profiles associated to each Radio Profile in releases 7.1 and greater." ::= { ntwsApConfigGroups 6 } ntwsApConfRadioProfSnoopFilterTableGroup OBJECT-GROUP OBJECTS { ntwsApConfRpSnoopfRowStatus } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Snoop Filters associated to each Radio Profile in releases 7.1 and greater." ::= { ntwsApConfigGroups 7 } ntwsApConfServiceProfileTableGroup OBJECT-GROUP OBJECTS { ntwsApConfServProfSsidType, ntwsApConfServProfBeaconEnabled, ntwsApConfServProf11naMode, ntwsApConfServProf11ngMode, ntwsApConfServProf11nShortGuardIntervalEnabled, ntwsApConfServProf11nFrameAggregation, ntwsApConfServProf11nMsduMaxLength, ntwsApConfServProf11nMpduMaxLength, ntwsApConfServProfAuthFallthru, ntwsApConfServProfWebAAAForm, ntwsApConfServProfSharedKeyAuthEnabled, ntwsApConfServProfWpaIeEnabled, ntwsApConfServProfWpaIeCipherTkipEnabled, ntwsApConfServProfWpaIeCipherCcmpEnabled, ntwsApConfServProfWpaIeCipherWep40Enabled, ntwsApConfServProfWpaIeCipherWep104Enabled, ntwsApConfServProfWpaIeAuthDot1xEnabled, ntwsApConfServProfWpaIeAuthPskEnabled, ntwsApConfServProfRsnIeEnabled, ntwsApConfServProfRsnIeCipherTkipEnabled, ntwsApConfServProfRsnIeCipherCcmpEnabled, ntwsApConfServProfRsnIeCipherWep40Enabled, ntwsApConfServProfRsnIeCipherWep104Enabled, ntwsApConfServProfRsnIeAuthDot1xEnabled, ntwsApConfServProfRsnIeAuthPskEnabled, ntwsApConfServProfTkipMicCountermeasuresTime, ntwsApConfServProfMaxBandwidthKbps, ntwsApConfServProfCacMode, ntwsApConfServProfCacSessCount, ntwsApConfServProfUserIdleTimeout, ntwsApConfServProfIdleClientProbingEnabled, ntwsApConfServProfShortRetryCount, ntwsApConfServProfLongRetryCount, ntwsApConfServProfProxyArpEnabled, ntwsApConfServProfDhcpRestrictEnabled, ntwsApConfServProfNoBroadcastEnabled, ntwsApConfServProfSygateOnDemandEnabled, ntwsApConfServProfEnforceChecksEnabled, ntwsApConfServProfSodaRemediationAcl, ntwsApConfServProfSodaSuccessPage, ntwsApConfServProfSodaFailurePage, ntwsApConfServProfSodaLogoutPage, ntwsApConfServProfSodaAgentDirectory, ntwsApConfServProfWebPortalSessionTimeout, ntwsApConfServProfWebPortalAcl, ntwsApConfServProfWebPortalLogoutEnabled, ntwsApConfServProfWebPortalLogoutUrl, ntwsApConfServProfKeepInitialVlanEnabled, ntwsApConfServProfMeshModeEnabled, ntwsApConfServProfBridgingEnabled, ntwsApConfServProfLoadBalanceExemptEnabled } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Service Profile configuration info in releases 7.1 and greater." ::= { ntwsApConfigGroups 8 } ntwsApConfSnoopFilterTableGroup OBJECT-GROUP OBJECTS { ntwsApConfSnoopFilterEnabled } STATUS current DESCRIPTION "Group of columnar objects implemented to provide Snoop Filter configuration info in releases 7.1 and greater." ::= { ntwsApConfigGroups 9 } END