510 lines
22 KiB
Plaintext
510 lines
22 KiB
Plaintext
-- ****************************************************************************
|
|
-- ****************************************************************************
|
|
--
|
|
-- File: MX-QOS-MIB.my
|
|
--
|
|
-- Package: MediatrixMibs
|
|
--
|
|
-- ****************************************************************************
|
|
-- ****************************************************************************
|
|
--
|
|
-- Copyright(c) 2001-2005 Mediatrix Telecom, Inc.
|
|
-- Copyright(c) 2009 Media5 Corporation. ("Media5")
|
|
--
|
|
-- NOTICE:
|
|
-- This document contains information that is confidential and proprietary
|
|
-- to Media5.
|
|
--
|
|
-- Media5 reserves all rights to this document as well as to the Intellectual
|
|
-- Property of the document and the technology and know-how that it includes
|
|
-- and represents.
|
|
--
|
|
-- This publication cannot be reproduced, neither in whole nor in part, in
|
|
-- any form whatsoever without written prior approval by Media5.
|
|
--
|
|
-- Media5 reserves the right to revise this publication and make changes at
|
|
-- any time and without the obligation to notify any person and/or entity of
|
|
-- such revisions and/or changes.
|
|
--
|
|
-- ****************************************************************************
|
|
-- ****************************************************************************
|
|
|
|
MX-QOS-MIB
|
|
DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
MxEnableState
|
|
FROM MX-TC
|
|
mediatrixConfig
|
|
FROM MX-SMI;
|
|
|
|
qosMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201011020000Z"
|
|
ORGANIZATION "Mediatrix Telecom, Inc."
|
|
CONTACT-INFO "Mediatrix Telecom, Inc.
|
|
4229, Garlock Street
|
|
Sherbrooke (Quebec)
|
|
Canada
|
|
Phone: (819) 829-8749
|
|
"
|
|
DESCRIPTION "This MIB provides configuration of Quality of Services
|
|
field value."
|
|
-- ************************************************************************
|
|
-- Revision history
|
|
-- ************************************************************************
|
|
REVISION "201011020000Z"
|
|
DESCRIPTION "Added qosInterop group"
|
|
REVISION "200903060000Z"
|
|
DESCRIPTION "Modified qosVlanIeee8021qSubstitutionVlanID value range to allow value 0"
|
|
REVISION "200509260000Z"
|
|
DESCRIPTION "Addition of the qosVlanIeee8021qSubstitutionFiltering variable"
|
|
REVISION "200502210000Z"
|
|
DESCRIPTION "Addition of the qosIeee8021qSubstitution group"
|
|
REVISION "200406170000Z"
|
|
DESCRIPTION "Modified the QoS configuration variable descriptions to mention that
|
|
the Administration Manual contains further material on the subject."
|
|
REVISION "200108230000Z"
|
|
DESCRIPTION "Creation"
|
|
::= { mediatrixConfig 20 }
|
|
|
|
qosMIBObjects OBJECT IDENTIFIER ::= { qosMIB 1 }
|
|
qosConformance OBJECT IDENTIFIER ::= { qosMIB 2 }
|
|
|
|
qosDiffServ OBJECT IDENTIFIER ::= { qosMIBObjects 1 }
|
|
|
|
|
|
qosSignalingDiffServ OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Signaling QoS Differentiated Services field value.
|
|
Refer to the Quality of Service section of your Administration
|
|
Manual for a detailed description."
|
|
DEFVAL { 184 }
|
|
::= { qosDiffServ 1 }
|
|
|
|
qosVoiceDiffServ OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Voice QoS Differentiated Services field value.
|
|
Refer to the Quality of Service section of your Administration
|
|
Manual for a detailed description."
|
|
DEFVAL { 184 }
|
|
::= { qosDiffServ 2 }
|
|
|
|
qosT38FaxDiffServ OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "T.38 QoS Differentiated Services field value.
|
|
Refer to the Quality of Service section of your Administration
|
|
Manual for a detailed description."
|
|
DEFVAL { 184 }
|
|
::= { qosDiffServ 3 }
|
|
|
|
qosVbdDiffServ OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Voice-band data QoS Differentiated Services field value.
|
|
Refer to the Quality of Service section of your Administration
|
|
Manual for a detailed description."
|
|
DEFVAL { 184 }
|
|
::= { qosDiffServ 4 }
|
|
|
|
qosIeee8021q OBJECT IDENTIFIER ::= { qosMIBObjects 2 }
|
|
|
|
qosSignalingIeee8021qEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling IEEE 802.1Q VLAN user priority
|
|
tagging for VoIP signaling packet.
|
|
This filter applies to any VoIP signaling
|
|
protocol in use (e.g. MGCP or SIP).
|
|
When the filter is disabled (as well as VLAN),
|
|
no tag is added to the Ethernet header.
|
|
Otherwise, each signaling packet is
|
|
tagged with the user priority defined below."
|
|
DEFVAL { disable }
|
|
::= { qosIeee8021q 1 }
|
|
|
|
qosSignalingIeee8021qUserPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IEEE 802.1Q VLAN user priority value for VoIP
|
|
signaling packet. This value is used to set
|
|
the user priority in the TCI field of the VLAN tag.
|
|
Tagging user priority is applied only when the
|
|
filter is enabled. In the case where the filter
|
|
for signaling protocol is disabled and the VLAN
|
|
option is enabled, the default user priority
|
|
declared under the VLAN group will be used.
|
|
Otherwise, the user priority set for signaling
|
|
has precedence over the VLAN default user priority.
|
|
7 = High priority
|
|
0 = Low priority"
|
|
DEFVAL { 6 }
|
|
::= { qosIeee8021q 2 }
|
|
|
|
qosVoiceIeee8021qEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling IEEE 802.1Q VLAN user priority
|
|
tagging for VoIP packet. This filter
|
|
applies to any VoIP voice protocol in use
|
|
(e.g. RTP). When the filter is disabled
|
|
(as well as VLAN), no tag is added to the Ethernet
|
|
header. Otherwise, each signaling packet is tagged
|
|
with the user priority defined below."
|
|
DEFVAL { disable }
|
|
::= { qosIeee8021q 3 }
|
|
|
|
qosVoiceIeee8021qUserPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IEEE 802.1Q VLAN user priority value for VoIP
|
|
packet. This value is used to set the
|
|
user priority in the TCI field of the VLAN tag.
|
|
Tagging user priority is applied only when the
|
|
filter is enabled. In the case where the filter
|
|
for media protocol is disabled and the VLAN
|
|
option is enabled, the default user priority
|
|
declared under the VLAN group will be used.
|
|
Otherwise, the user priority set for media
|
|
has precedence over the VLAN default user priority.
|
|
7 = High priority
|
|
0 = Low priority"
|
|
DEFVAL { 6 }
|
|
::= { qosIeee8021q 4 }
|
|
|
|
qosT38FaxIeee8021qEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling IEEE 802.1Q VLAN user priority
|
|
tagging for T.38 fax packet. When the filter is disabled
|
|
(as well as VLAN), no tag is added to the Ethernet
|
|
header. Otherwise, each signaling packet is tagged
|
|
with the user priority defined below."
|
|
DEFVAL { disable }
|
|
::= { qosIeee8021q 5 }
|
|
|
|
qosT38FaxIeee8021qUserPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IEEE 802.1Q VLAN user priority value for T.38
|
|
fax packet. This value is used to set the
|
|
user priority in the TCI field of the VLAN tag.
|
|
Tagging user priority is applied only when the
|
|
filter is enabled. In the case where the filter
|
|
for T.38 protocol is disabled and the VLAN
|
|
option is enabled, the default user priority
|
|
declared under the VLAN group will be used.
|
|
Otherwise, the user priority set for T.38
|
|
has precedence over the VLAN default user priority.
|
|
7 = High priority
|
|
0 = Low priority"
|
|
DEFVAL { 6 }
|
|
::= { qosIeee8021q 6 }
|
|
|
|
qosVbdIeee8021qEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling IEEE 802.1Q VLAN user priority
|
|
tagging for voice-band data packet. This filter
|
|
applies to any voice-band data protocol in use.
|
|
When the filter is disabled (as well as VLAN),
|
|
no tag is added to the Ethernet header.
|
|
Otherwise, each signaling packet is tagged
|
|
with the user priority defined below."
|
|
DEFVAL { disable }
|
|
::= { qosIeee8021q 7 }
|
|
|
|
qosVbdIeee8021qUserPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IEEE 802.1Q VLAN user priority value for voice-band
|
|
data packet. This value is used to set the
|
|
user priority in the TCI field of the VLAN tag.
|
|
Tagging user priority is applied only when the
|
|
filter is enabled. In the case where the filter
|
|
for VBD protocol is disabled and the VLAN
|
|
option is enabled, the default user priority
|
|
declared under the VLAN group will be used.
|
|
Otherwise, the user priority set for VBD
|
|
has precedence over the VLAN default user priority.
|
|
7 = High priority
|
|
0 = Low priority"
|
|
DEFVAL { 6 }
|
|
::= { qosIeee8021q 8 }
|
|
|
|
qosVlanIeee8021q OBJECT IDENTIFIER ::= { qosIeee8021q 15 }
|
|
|
|
qosVlanIeee8021qTaggingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling IEEE 802.1Q VLAN tagging. With this
|
|
option enabled, all packets are tagged with
|
|
the Virtual ID (VID) specified below. The
|
|
default user priority is to be applied in case
|
|
of general protocol or when signaling or media
|
|
protocol filtering is disabled.
|
|
WARNING: Enable this option only on compatible LAN
|
|
with equipment supporting the VLAN tagging. Otherwise,
|
|
the Unit may be unreachable. In this case, please use
|
|
the reset button to access and disable VLAN tagging -
|
|
in the reset mode, tagging is not permitted. See IEEE
|
|
802.1Q for more information on this topic."
|
|
DEFVAL { disable }
|
|
::= { qosVlanIeee8021q 1 }
|
|
|
|
qosVlanIeee8021qVirtualLanID OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IEEE 802.1Q Virtual LAN ID. This is the VID to
|
|
be applied in the TCI field when tagging is enabled.
|
|
The value 1 is the default Port VID (PVID) for bridge
|
|
port. The 4095 VID (0xFFF) is reserved for implementation
|
|
use and it shall not be used in tag header.
|
|
NOTE: As per standard, some bridges may not support
|
|
the full range of VID."
|
|
DEFVAL { 1 }
|
|
::= { qosVlanIeee8021q 2 }
|
|
|
|
qosVlanIeee8021qDefaultUserPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IEEE 802.1Q Virtual LAN default user priority.
|
|
This is the user priority to be applied in the
|
|
TCI field when tagging is enabled. This value
|
|
applies to all protocols for which no priority
|
|
filtering is enabled (e.g. ARP, ICMP)
|
|
7 = High priority
|
|
0 = Low priority"
|
|
DEFVAL { 6 }
|
|
::= { qosVlanIeee8021q 3 }
|
|
|
|
|
|
qosIeee8021qSubstitution OBJECT IDENTIFIER ::= { qosMIBObjects 10 }
|
|
|
|
qosVlanIeee8021qSubstitutionEnable OBJECT-TYPE
|
|
SYNTAX MxEnableState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether the packets relayed from the LAN port to
|
|
the WAN port will be tagged with the VLAN ID defined in the
|
|
qosVlanIeee8021qSubstitutionVlanID variable.
|
|
|
|
enable : The QoS 802.1q fields of the packets sent from the LAN to
|
|
the WAN are assigned the value defined in the
|
|
qosVlanIeee8021qSubstitutionVlanID and
|
|
qosVlanIeee8021qSubstitutionUserPriority variables.
|
|
|
|
disable : The QoS 802.1q fields of the packets sent from the LAN to
|
|
the WAN are left as is.
|
|
|
|
This variable's semantics are different depending on protocol and/or
|
|
hardware platforms.
|
|
|
|
The name of the LAN and WAN ports differ depending on the product.
|
|
|
|
Please refer to the documentation shipped with your device for more details."
|
|
DEFVAL { disable }
|
|
::= { qosIeee8021qSubstitution 10 }
|
|
|
|
qosVlanIeee8021qSubstitutionVlanID OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IEEE 802.1Q Virtual LAN ID applied when the variable
|
|
qosVlanIeee8021qSubstitutionEnable is set to enable.
|
|
The value 1 is the default Port VID (PVID) for bridge
|
|
port. The 4095 VID (0xFFF) is reserved for implementation
|
|
use and it must not be used in the tag header.
|
|
NOTE: As per the standard, some bridges may not support
|
|
the full range of VID.
|
|
|
|
This variable's semantics are different depending on protocol and/or
|
|
hardware platforms.
|
|
|
|
Please refer to the documentation shipped with your device for more details."
|
|
DEFVAL { 1 }
|
|
::= { qosIeee8021qSubstitution 20 }
|
|
|
|
qosVlanIeee8021qSubstitutionUserPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IEEE 802.1Q Virtual LAN default user priority.
|
|
This is the user priority applied when the variable
|
|
qosVlanIeee8021qSubstitutionEnable is set to enable. This value
|
|
applies to all protocols for which no priority
|
|
filtering is enabled (e.g. ARP, ICMP).
|
|
7 = High priority
|
|
0 = Low priority
|
|
|
|
This variable's semantics are different depending on protocol and/or
|
|
hardware platforms.
|
|
|
|
Please refer to the documentation shipped with your device for more details."
|
|
DEFVAL { 0 }
|
|
::= { qosIeee8021qSubstitution 30 }
|
|
|
|
|
|
qosVlanIeee8021qSubstitutionFiltering OBJECT-TYPE
|
|
SYNTAX MxEnableState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether packets sent to the Computer port will
|
|
pass trough the VLAN ID filtering. It is especially useful
|
|
to restrain the broadcast domain between each port's
|
|
subnet. It is applied when the variable
|
|
qosVlanIeee8021qSubstitutionEnable is set to enable.
|
|
|
|
enable : Packets sent to the Computer port must have the
|
|
right VLAN ID. Packets with a different VLAN ID,
|
|
or untagged packets, will be dropped.
|
|
|
|
disable : Packets sent to the Computer port (tagged or not)
|
|
with any tag) are forwarded from the Network to
|
|
the Computer port. This effectively extends
|
|
the broadcast domain and allows nodes behind the
|
|
computer port to share the same IP subnet as
|
|
the unit itself.
|
|
|
|
This variable's semantics are different depending on
|
|
protocol and/or hardware platforms.
|
|
|
|
Please refer to the documentation shipped with your device
|
|
for more details."
|
|
DEFVAL { disable }
|
|
::= { qosIeee8021qSubstitution 40 }
|
|
|
|
qosInterop OBJECT IDENTIFIER ::= { qosMIBObjects 20 }
|
|
|
|
qosInteropUseVoiceQoSForRtcpEnable OBJECT-TYPE
|
|
SYNTAX MxEnableState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether or not if the configuration related with the voice QoS (qosVoiceDiffServ and
|
|
qosVoiceIeee8021qUserPriority variables) is also applied to the RTCP packets
|
|
generated by the device.
|
|
|
|
enable : The voice QoS configuration (qosVoiceDiffServ and qosVoiceIeee8021qUserPriority
|
|
variables) is also applied to the RTCP packets.
|
|
|
|
disable : The RTCP packets are not tagged by the qosVoiceDiffServ and qosVoiceIeee8021qUserPriority variables.
|
|
|
|
This variable's semantics are different depending on protocol and/or
|
|
hardware platforms.
|
|
|
|
Please refer to the documentation shipped with your device for more details."
|
|
DEFVAL { disable }
|
|
::= { qosInterop 10 }
|
|
|
|
-- ************************************************************************
|
|
-- Conformance information
|
|
-- ************************************************************************
|
|
qosCompliances OBJECT IDENTIFIER ::= { qosConformance 1 }
|
|
|
|
qosAnalogComplVer1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This compliance group contains Qos variables supported by
|
|
an analog device."
|
|
MODULE -- This Module
|
|
MANDATORY-GROUPS {
|
|
qosDiffServGroupVer1,
|
|
qosIeee8021qGroupVer1,
|
|
qosIeee8021qSubstitutionGroupVer1
|
|
}
|
|
::= { qosCompliances 1 }
|
|
|
|
-- ************************************************************************
|
|
-- MIB variable grouping
|
|
-- ************************************************************************
|
|
qosGroups OBJECT IDENTIFIER ::= { qosConformance 2 }
|
|
|
|
qosDiffServGroupVer1 OBJECT-GROUP
|
|
OBJECTS {
|
|
qosSignalingDiffServ,
|
|
qosVoiceDiffServ,
|
|
qosT38FaxDiffServ,
|
|
qosVbdDiffServ
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group holds the objects that define the DiffServ
|
|
parameters supported."
|
|
::= { qosGroups 1 }
|
|
|
|
qosIeee8021qGroupVer1 OBJECT-GROUP
|
|
OBJECTS {
|
|
qosSignalingDiffServ,
|
|
qosVoiceDiffServ,
|
|
qosT38FaxDiffServ,
|
|
qosVbdDiffServ
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group holds the objects that define IEEE 802.1q
|
|
parameters supported."
|
|
::= { qosGroups 2 }
|
|
|
|
qosIeee8021qSubstitutionGroupVer1 OBJECT-GROUP
|
|
OBJECTS {
|
|
qosVlanIeee8021qSubstitutionEnable,
|
|
qosVlanIeee8021qSubstitutionVlanID,
|
|
qosVlanIeee8021qSubstitutionUserPriority,
|
|
qosVlanIeee8021qSubstitutionFiltering
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group holds the objects that define IEEE 802.1q
|
|
for packets switched between the LAN port and the WAN port."
|
|
::= { qosGroups 10 }
|
|
|
|
qosInteropGroupVer1 OBJECT-GROUP
|
|
OBJECTS {
|
|
qosInteropUseVoiceQoSForRtcpEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group holds the objects that define QoS interopability parameters."
|
|
::= { qosGroups 20 }
|
|
|
|
END
|