-- **************************************************************************** -- **************************************************************************** -- -- File: MX-QOS-MIB.my -- -- Package: MediatrixMibs -- -- **************************************************************************** -- **************************************************************************** -- -- Copyright(c) 2001-2005 Mediatrix Telecom, Inc. -- Copyright(c) 2009 Media5 Corporation. ("Media5") -- -- NOTICE: -- This document contains information that is confidential and proprietary -- to Media5. -- -- Media5 reserves all rights to this document as well as to the Intellectual -- Property of the document and the technology and know-how that it includes -- and represents. -- -- This publication cannot be reproduced, neither in whole nor in part, in -- any form whatsoever without written prior approval by Media5. -- -- Media5 reserves the right to revise this publication and make changes at -- any time and without the obligation to notify any person and/or entity of -- such revisions and/or changes. -- -- **************************************************************************** -- **************************************************************************** MX-QOS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MxEnableState FROM MX-TC mediatrixConfig FROM MX-SMI; qosMIB MODULE-IDENTITY LAST-UPDATED "201011020000Z" ORGANIZATION "Mediatrix Telecom, Inc." CONTACT-INFO "Mediatrix Telecom, Inc. 4229, Garlock Street Sherbrooke (Quebec) Canada Phone: (819) 829-8749 " DESCRIPTION "This MIB provides configuration of Quality of Services field value." -- ************************************************************************ -- Revision history -- ************************************************************************ REVISION "201011020000Z" DESCRIPTION "Added qosInterop group" REVISION "200903060000Z" DESCRIPTION "Modified qosVlanIeee8021qSubstitutionVlanID value range to allow value 0" REVISION "200509260000Z" DESCRIPTION "Addition of the qosVlanIeee8021qSubstitutionFiltering variable" REVISION "200502210000Z" DESCRIPTION "Addition of the qosIeee8021qSubstitution group" REVISION "200406170000Z" DESCRIPTION "Modified the QoS configuration variable descriptions to mention that the Administration Manual contains further material on the subject." REVISION "200108230000Z" DESCRIPTION "Creation" ::= { mediatrixConfig 20 } qosMIBObjects OBJECT IDENTIFIER ::= { qosMIB 1 } qosConformance OBJECT IDENTIFIER ::= { qosMIB 2 } qosDiffServ OBJECT IDENTIFIER ::= { qosMIBObjects 1 } qosSignalingDiffServ OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Signaling QoS Differentiated Services field value. Refer to the Quality of Service section of your Administration Manual for a detailed description." DEFVAL { 184 } ::= { qosDiffServ 1 } qosVoiceDiffServ OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Voice QoS Differentiated Services field value. Refer to the Quality of Service section of your Administration Manual for a detailed description." DEFVAL { 184 } ::= { qosDiffServ 2 } qosT38FaxDiffServ OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "T.38 QoS Differentiated Services field value. Refer to the Quality of Service section of your Administration Manual for a detailed description." DEFVAL { 184 } ::= { qosDiffServ 3 } qosVbdDiffServ OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Voice-band data QoS Differentiated Services field value. Refer to the Quality of Service section of your Administration Manual for a detailed description." DEFVAL { 184 } ::= { qosDiffServ 4 } qosIeee8021q OBJECT IDENTIFIER ::= { qosMIBObjects 2 } qosSignalingIeee8021qEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling IEEE 802.1Q VLAN user priority tagging for VoIP signaling packet. This filter applies to any VoIP signaling protocol in use (e.g. MGCP or SIP). When the filter is disabled (as well as VLAN), no tag is added to the Ethernet header. Otherwise, each signaling packet is tagged with the user priority defined below." DEFVAL { disable } ::= { qosIeee8021q 1 } qosSignalingIeee8021qUserPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "IEEE 802.1Q VLAN user priority value for VoIP signaling packet. This value is used to set the user priority in the TCI field of the VLAN tag. Tagging user priority is applied only when the filter is enabled. In the case where the filter for signaling protocol is disabled and the VLAN option is enabled, the default user priority declared under the VLAN group will be used. Otherwise, the user priority set for signaling has precedence over the VLAN default user priority. 7 = High priority 0 = Low priority" DEFVAL { 6 } ::= { qosIeee8021q 2 } qosVoiceIeee8021qEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling IEEE 802.1Q VLAN user priority tagging for VoIP packet. This filter applies to any VoIP voice protocol in use (e.g. RTP). When the filter is disabled (as well as VLAN), no tag is added to the Ethernet header. Otherwise, each signaling packet is tagged with the user priority defined below." DEFVAL { disable } ::= { qosIeee8021q 3 } qosVoiceIeee8021qUserPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "IEEE 802.1Q VLAN user priority value for VoIP packet. This value is used to set the user priority in the TCI field of the VLAN tag. Tagging user priority is applied only when the filter is enabled. In the case where the filter for media protocol is disabled and the VLAN option is enabled, the default user priority declared under the VLAN group will be used. Otherwise, the user priority set for media has precedence over the VLAN default user priority. 7 = High priority 0 = Low priority" DEFVAL { 6 } ::= { qosIeee8021q 4 } qosT38FaxIeee8021qEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling IEEE 802.1Q VLAN user priority tagging for T.38 fax packet. When the filter is disabled (as well as VLAN), no tag is added to the Ethernet header. Otherwise, each signaling packet is tagged with the user priority defined below." DEFVAL { disable } ::= { qosIeee8021q 5 } qosT38FaxIeee8021qUserPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "IEEE 802.1Q VLAN user priority value for T.38 fax packet. This value is used to set the user priority in the TCI field of the VLAN tag. Tagging user priority is applied only when the filter is enabled. In the case where the filter for T.38 protocol is disabled and the VLAN option is enabled, the default user priority declared under the VLAN group will be used. Otherwise, the user priority set for T.38 has precedence over the VLAN default user priority. 7 = High priority 0 = Low priority" DEFVAL { 6 } ::= { qosIeee8021q 6 } qosVbdIeee8021qEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling IEEE 802.1Q VLAN user priority tagging for voice-band data packet. This filter applies to any voice-band data protocol in use. When the filter is disabled (as well as VLAN), no tag is added to the Ethernet header. Otherwise, each signaling packet is tagged with the user priority defined below." DEFVAL { disable } ::= { qosIeee8021q 7 } qosVbdIeee8021qUserPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "IEEE 802.1Q VLAN user priority value for voice-band data packet. This value is used to set the user priority in the TCI field of the VLAN tag. Tagging user priority is applied only when the filter is enabled. In the case where the filter for VBD protocol is disabled and the VLAN option is enabled, the default user priority declared under the VLAN group will be used. Otherwise, the user priority set for VBD has precedence over the VLAN default user priority. 7 = High priority 0 = Low priority" DEFVAL { 6 } ::= { qosIeee8021q 8 } qosVlanIeee8021q OBJECT IDENTIFIER ::= { qosIeee8021q 15 } qosVlanIeee8021qTaggingEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling IEEE 802.1Q VLAN tagging. With this option enabled, all packets are tagged with the Virtual ID (VID) specified below. The default user priority is to be applied in case of general protocol or when signaling or media protocol filtering is disabled. WARNING: Enable this option only on compatible LAN with equipment supporting the VLAN tagging. Otherwise, the Unit may be unreachable. In this case, please use the reset button to access and disable VLAN tagging - in the reset mode, tagging is not permitted. See IEEE 802.1Q for more information on this topic." DEFVAL { disable } ::= { qosVlanIeee8021q 1 } qosVlanIeee8021qVirtualLanID OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "IEEE 802.1Q Virtual LAN ID. This is the VID to be applied in the TCI field when tagging is enabled. The value 1 is the default Port VID (PVID) for bridge port. The 4095 VID (0xFFF) is reserved for implementation use and it shall not be used in tag header. NOTE: As per standard, some bridges may not support the full range of VID." DEFVAL { 1 } ::= { qosVlanIeee8021q 2 } qosVlanIeee8021qDefaultUserPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "IEEE 802.1Q Virtual LAN default user priority. This is the user priority to be applied in the TCI field when tagging is enabled. This value applies to all protocols for which no priority filtering is enabled (e.g. ARP, ICMP) 7 = High priority 0 = Low priority" DEFVAL { 6 } ::= { qosVlanIeee8021q 3 } qosIeee8021qSubstitution OBJECT IDENTIFIER ::= { qosMIBObjects 10 } qosVlanIeee8021qSubstitutionEnable OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the packets relayed from the LAN port to the WAN port will be tagged with the VLAN ID defined in the qosVlanIeee8021qSubstitutionVlanID variable. enable : The QoS 802.1q fields of the packets sent from the LAN to the WAN are assigned the value defined in the qosVlanIeee8021qSubstitutionVlanID and qosVlanIeee8021qSubstitutionUserPriority variables. disable : The QoS 802.1q fields of the packets sent from the LAN to the WAN are left as is. This variable's semantics are different depending on protocol and/or hardware platforms. The name of the LAN and WAN ports differ depending on the product. Please refer to the documentation shipped with your device for more details." DEFVAL { disable } ::= { qosIeee8021qSubstitution 10 } qosVlanIeee8021qSubstitutionVlanID OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The IEEE 802.1Q Virtual LAN ID applied when the variable qosVlanIeee8021qSubstitutionEnable is set to enable. The value 1 is the default Port VID (PVID) for bridge port. The 4095 VID (0xFFF) is reserved for implementation use and it must not be used in the tag header. NOTE: As per the standard, some bridges may not support the full range of VID. This variable's semantics are different depending on protocol and/or hardware platforms. Please refer to the documentation shipped with your device for more details." DEFVAL { 1 } ::= { qosIeee8021qSubstitution 20 } qosVlanIeee8021qSubstitutionUserPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "IEEE 802.1Q Virtual LAN default user priority. This is the user priority applied when the variable qosVlanIeee8021qSubstitutionEnable is set to enable. This value applies to all protocols for which no priority filtering is enabled (e.g. ARP, ICMP). 7 = High priority 0 = Low priority This variable's semantics are different depending on protocol and/or hardware platforms. Please refer to the documentation shipped with your device for more details." DEFVAL { 0 } ::= { qosIeee8021qSubstitution 30 } qosVlanIeee8021qSubstitutionFiltering OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether packets sent to the Computer port will pass trough the VLAN ID filtering. It is especially useful to restrain the broadcast domain between each port's subnet. It is applied when the variable qosVlanIeee8021qSubstitutionEnable is set to enable. enable : Packets sent to the Computer port must have the right VLAN ID. Packets with a different VLAN ID, or untagged packets, will be dropped. disable : Packets sent to the Computer port (tagged or not) with any tag) are forwarded from the Network to the Computer port. This effectively extends the broadcast domain and allows nodes behind the computer port to share the same IP subnet as the unit itself. This variable's semantics are different depending on protocol and/or hardware platforms. Please refer to the documentation shipped with your device for more details." DEFVAL { disable } ::= { qosIeee8021qSubstitution 40 } qosInterop OBJECT IDENTIFIER ::= { qosMIBObjects 20 } qosInteropUseVoiceQoSForRtcpEnable OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether or not if the configuration related with the voice QoS (qosVoiceDiffServ and qosVoiceIeee8021qUserPriority variables) is also applied to the RTCP packets generated by the device. enable : The voice QoS configuration (qosVoiceDiffServ and qosVoiceIeee8021qUserPriority variables) is also applied to the RTCP packets. disable : The RTCP packets are not tagged by the qosVoiceDiffServ and qosVoiceIeee8021qUserPriority variables. This variable's semantics are different depending on protocol and/or hardware platforms. Please refer to the documentation shipped with your device for more details." DEFVAL { disable } ::= { qosInterop 10 } -- ************************************************************************ -- Conformance information -- ************************************************************************ qosCompliances OBJECT IDENTIFIER ::= { qosConformance 1 } qosAnalogComplVer1 MODULE-COMPLIANCE STATUS current DESCRIPTION "This compliance group contains Qos variables supported by an analog device." MODULE -- This Module MANDATORY-GROUPS { qosDiffServGroupVer1, qosIeee8021qGroupVer1, qosIeee8021qSubstitutionGroupVer1 } ::= { qosCompliances 1 } -- ************************************************************************ -- MIB variable grouping -- ************************************************************************ qosGroups OBJECT IDENTIFIER ::= { qosConformance 2 } qosDiffServGroupVer1 OBJECT-GROUP OBJECTS { qosSignalingDiffServ, qosVoiceDiffServ, qosT38FaxDiffServ, qosVbdDiffServ } STATUS current DESCRIPTION "This group holds the objects that define the DiffServ parameters supported." ::= { qosGroups 1 } qosIeee8021qGroupVer1 OBJECT-GROUP OBJECTS { qosSignalingDiffServ, qosVoiceDiffServ, qosT38FaxDiffServ, qosVbdDiffServ } STATUS current DESCRIPTION "This group holds the objects that define IEEE 802.1q parameters supported." ::= { qosGroups 2 } qosIeee8021qSubstitutionGroupVer1 OBJECT-GROUP OBJECTS { qosVlanIeee8021qSubstitutionEnable, qosVlanIeee8021qSubstitutionVlanID, qosVlanIeee8021qSubstitutionUserPriority, qosVlanIeee8021qSubstitutionFiltering } STATUS current DESCRIPTION "This group holds the objects that define IEEE 802.1q for packets switched between the LAN port and the WAN port." ::= { qosGroups 10 } qosInteropGroupVer1 OBJECT-GROUP OBJECTS { qosInteropUseVoiceQoSForRtcpEnable } STATUS current DESCRIPTION "This group holds the objects that define QoS interopability parameters." ::= { qosGroups 20 } END