WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/huawei/HWMUSA-UP-MIB

3053 lines
111 KiB
Plaintext
Raw Permalink Blame History

-- ============================================================================
-- Copyright (C) 2010 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: This is the MIB module for Huawei musa MD5500 private objects
-- for service information.
-- Reference:
-- Version: V1.14
-- ============================================================================
--
-- Document description: HWMD5500PortAdmin module, MD5500 V100R001, Huawei
-- Prepared by: Zeng Guibiao 24853
-- Created on: 2000/12/13
-- Modified on: 2000/12/20
-- Modified by: Zeng Guibiao 24853
--
--
HWMUSA-UP-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwProducts
FROM HUAWEI-MIB
OBJECT-TYPE, MODULE-IDENTITY,Integer32,NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus, TruthValue
FROM SNMPv2-TC;
hwMD5500PortAdminMIB MODULE-IDENTITY
LAST-UPDATED "201011172040Z"
ORGANIZATION "Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"This is the MIB module for Huawei musa MD5500
private objects for service information."
-- Revision history
REVISION "201011172040Z"
DESCRIPTION "V1.14, change in this revision:
-Modified the description"
REVISION "201007270000Z"
DESCRIPTION "V1.13, change in this revision:
-Description change"
REVISION "201003240000Z"
DESCRIPTION "V1.12, change in this revision:
-Corrected the SYNTAX."
::= { hwMd5500Mib 4 }
musa OBJECT IDENTIFIER ::= { hwProducts 6 }
hwMd5500Mib OBJECT IDENTIFIER ::= { musa 4 }
-- PSTN port MIB
hwMD5500PSTNPort OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 6 }
hwMD5500PSTNPortPhyTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMD5500PSTNPortPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The indexes of this table are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex,
and hwMD5500PSTNPortIndex.
"
::= { hwMD5500PSTNPort 1 }
hwMD5500PSTNPortPhyEntry OBJECT-TYPE
SYNTAX HwMD5500PSTNPortPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The indexes of this entry are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex,
and hwMD5500PSTNPortIndex.
"
INDEX { hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, hwMD5500PSTNPortIndex }
::= { hwMD5500PSTNPortPhyTable 1 }
HwMD5500PSTNPortPhyEntry ::=
SEQUENCE {
hwMD5500PSTNPortFrameIndex
Integer32,
hwMD5500PSTNPortSlotIndex
Integer32,
hwMD5500PSTNPortIndex
Integer32,
v5ID
Integer32,
l3Addr
Integer32,
v51Ts
Integer32,
telNo
OCTET STRING,
serviceType
INTEGER,
pSTNState
INTEGER,
fSMState
INTEGER,
portState
INTEGER,
operate
INTEGER,
hwPSTNPortMaintainStatus
INTEGER,
rowStatus
RowStatus
}
hwMD5500PSTNPortFrameIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwMD5500PSTNPortPhyEntry 1 }
hwMD5500PSTNPortSlotIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwMD5500PSTNPortPhyEntry 2 }
hwMD5500PSTNPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwMD5500PSTNPortPhyEntry 3 }
v5ID OBJECT-TYPE
SYNTAX Integer32 (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwMD5500PSTNPortPhyEntry 4 }
l3Addr OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwMD5500PSTNPortPhyEntry 5 }
v51Ts OBJECT-TYPE
SYNTAX Integer32 (1..15 | 17..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwMD5500PSTNPortPhyEntry 6 }
telNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwMD5500PSTNPortPhyEntry 7 }
serviceType OBJECT-TYPE
SYNTAX INTEGER
{
currenser(1),
insidespc(2),
v5spc(3),
v5preconn(4),
hireline(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.currenser(1) -indicates the type is currenser
2.insidespc(2) -indicates the type is insidespc
3.v5spc(3) -indicates the type is v5spc
4.v5preconn(4) -indicates the type is v5preconn
5.hireline(5) -indicates the type is hireline
"
::= { hwMD5500PSTNPortPhyEntry 8 }
pSTNState OBJECT-TYPE
SYNTAX INTEGER
{
ano(1),
an1(2),
an2(3),
an3(4),
an4(5),
an5(6),
an6(7),
an7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.ano(1) -indicates the state is ano
2.an1(2) -indicates the state is an1
3.an2(3) -indicates the state is an2
4.an3(4) -indicates the state is an3
5.an4(5) -indicates the state is an4
6.an5(6) -indicates the state is an5
7.an6(7) -indicates the state is an6
8.an7(8) -indicates the state is an7
"
::= { hwMD5500PSTNPortPhyEntry 9 }
fSMState OBJECT-TYPE
SYNTAX INTEGER
{
an10(1),
an11(2),
an12(3),
an20(4),
an21(5),
an22(6),
an31(7),
an32(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.an10(1) -indicates the state is an10
2.an11(2) -indicates the state is an11
3.an12(3) -indicates the state is an12
4.an20(4) -indicates the state is an20
5.an21(5) -indicates the state is an21
6.an22(6) -indicates the state is an22
7.an31(7) -indicates the state is an31
8.an32(8) -indicates the state is an32
"
::= { hwMD5500PSTNPortPhyEntry 10 }
portState OBJECT-TYPE
SYNTAX INTEGER
{
idle(1),
fault(2),
test(3),
maintain(4),
localblock(5),
oppblock(6),
lock(7),
busy(8),
viruser(9),
farloop(10),
nearloop(11),
b1codetest(12),
b2codetest(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.idle(1) -indicates the port state is idle
2.fault(2) -indicates the port state is fault
3.test(3) -indicates the port state is test
4.maintain(4) -indicates the port state is maintain
5.localblock(5) -indicates the port state is localblock
6.oppblock(6) -indicates the port state is oppblock
7.lock(7) -indicates the port state is lock
8.busy(8) -indicates the port state is busy
9.viruser(9) -indicates the port state is viruser
10.farloop(10) -indicates the port state is farloop
11.nearloop(11) -indicates the port state is nearloop
12.b1codetest(12) -indicates the port state is b1codetest
13.b2codetest(13) -indicates the port state is b2codetest
"
::= { hwMD5500PSTNPortPhyEntry 11 }
operate OBJECT-TYPE
SYNTAX INTEGER
{
block(1),
delayblock(2),
unblock(3),
reset(4),
nearloop(5),
unloop(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.block(1) -indicates the operation is block
2.delayblock(2) -indicates the operation is delayblock
3.unblock(3) -indicates the operation is unblock
4.reset(4) -indicates the operation is reset
5.nearloop(5) -indicates the operation is nearloop
6.unloop(6) -indicates the operation is unloop
"
::= { hwMD5500PSTNPortPhyEntry 12 }
hwPSTNPortMaintainStatus OBJECT-TYPE
SYNTAX INTEGER
{
mgcfged(1),
v5cfged(2),
notcfged(3),
spcmcfged(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1. mgcfged(1) -indicates the maintainstatus of the PSTN port is mgcfged
2. v5cfged(2) -indicates the maintainstatus of the PSTN port is v5cfged
3. notcfged(3) -indicates the maintainstatus of the PSTN port is notcfged
4. spcmcfged(4) -indicates the maintainstatus of the PSTN port is spcmcfged
"
::= { hwMD5500PSTNPortPhyEntry 13 }
rowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the row status."
::= { hwMD5500PSTNPortPhyEntry 14 }
hwPstnV5PortDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPstnV5PortDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this table are hwMD5500PSTNPortV5IDIndex and hwMD5500PSTNPortL3AddrIndex."
::= { hwMD5500PSTNPort 2 }
hwPstnV5PortDataEntry OBJECT-TYPE
SYNTAX HwPstnV5PortDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this entry are hwMD5500PSTNPortV5IDIndex and hwMD5500PSTNPortL3AddrIndex."
INDEX { hwMD5500PSTNPortV5IDIndex, hwMD5500PSTNPortL3AddrIndex }
::= { hwPstnV5PortDataTable 1 }
HwPstnV5PortDataEntry ::=
SEQUENCE {
hwMD5500PSTNPortV5IDIndex
Integer32,
hwMD5500PSTNPortL3AddrIndex
Integer32,
hwMD5500PSTNPortFrame
Integer32,
hwMD5500PSTNPortSlot
Integer32,
hwMD5500PSTNPortNumber
Integer32,
hwMD5500PSTNPortv51Ts
Integer32,
hwMD5500PSTNPorttelNo
OCTET STRING,
hwMD5500PSTNPortserviceType
INTEGER,
hwMD5500PSTNPortpSTNState
INTEGER,
hwMD5500PSTNPortfSMState
INTEGER,
hwMD5500PSTNPortportState
INTEGER,
hwMD5500PSTNPortoperate
INTEGER
}
hwMD5500PSTNPortV5IDIndex OBJECT-TYPE
SYNTAX Integer32 (0..16777215)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwPstnV5PortDataEntry 1 }
hwMD5500PSTNPortL3AddrIndex OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwPstnV5PortDataEntry 2 }
hwMD5500PSTNPortFrame OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwPstnV5PortDataEntry 3 }
hwMD5500PSTNPortSlot OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwPstnV5PortDataEntry 4 }
hwMD5500PSTNPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwPstnV5PortDataEntry 5 }
hwMD5500PSTNPortv51Ts OBJECT-TYPE
SYNTAX Integer32 (1..15 | 17..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwPstnV5PortDataEntry 6 }
hwMD5500PSTNPorttelNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwPstnV5PortDataEntry 7 }
hwMD5500PSTNPortserviceType OBJECT-TYPE
SYNTAX INTEGER
{
currenser(1),
insidespc(2),
v5spc(3),
v5preconn(4),
hireline(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.currenser(1) -indicates the type is currenser
2.insidespc(2) -indicates the type is insidespc
3.v5spc(3) -indicates the type is v5spc
4.v5preconn(4) -indicates the type is v5preconn
5.hireline(5) -indicates the type is hireline
"
::= { hwPstnV5PortDataEntry 8 }
hwMD5500PSTNPortpSTNState OBJECT-TYPE
SYNTAX INTEGER
{
an0(1),
an1(2),
an2(3),
an3(4),
an4(5),
an5(6),
an6(7),
an7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.an0(1) -indicates the state is ano
2.an1(2) -indicates the state is an1
3.an2(3) -indicates the state is an2
4.an3(4) -indicates the state is an3
5.an4(5) -indicates the state is an4
6.an5(6) -indicates the state is an5
7.an6(7) -indicates the state is an6
8.an7(8) -indicates the state is an7
"
::= { hwPstnV5PortDataEntry 9 }
hwMD5500PSTNPortfSMState OBJECT-TYPE
SYNTAX INTEGER
{
an10(1),
an11(2),
an12(3),
an20(4),
an21(5),
an22(6),
an31(7),
an32(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.an10(1) -indicates the state is an10
2.an11(2) -indicates the state is an11
3.an12(3) -indicates the state is an12
4.an20(4) -indicates the state is an20
5.an21(5) -indicates the state is an21
6.an22(6) -indicates the state is an22
7.an31(7) -indicates the state is an31
8.an32(8) -indicates the state is an32
"
::= { hwPstnV5PortDataEntry 10 }
hwMD5500PSTNPortportState OBJECT-TYPE
SYNTAX INTEGER
{
idle(1),
fault(2),
test(3),
maintain(4),
localblock(5),
oppblock(6),
lock(7),
busy(8),
viruser(9),
farloop(10),
nearloop(11),
b1codetest(12),
b2codetest(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.idle(1) -indicates the port state is idle
2.fault(2) -indicates the port state is fault
3.test(3) -indicates the port state is test
4.maintain(4) -indicates the port state is maintain
5.localblock(5) -indicates the port state is localblock
6.oppblock(6) -indicates the port state is oppblock
7.lock(7) -indicates the port state is lock
8.busy(8) -indicates the port state is busy
9.viruser(9) -indicates the port state is viruser
10.farloop(10) -indicates the port state is farloop
11.nearloop(11) -indicates the port state is nearloop
12.b1codetest(12) -indicates the port state is b1codetest
13.b2codetest(13) -indicates the port state is b2codetest
"
::= { hwPstnV5PortDataEntry 11 }
hwMD5500PSTNPortoperate OBJECT-TYPE
SYNTAX INTEGER
{
block(1),
delayblock(2),
unblock(3),
reset(4),
nearloop(5),
unloop(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.block(1) -indicates the operation is block
2.delayblock(2) -indicates the operation is delayblock
3.unblock(3) -indicates the operation is unblock
4.reset(4) -indicates the operation is reset
5.nearloop(5) -indicates the operation is nearloop
6.unloop(6) -indicates the operation is unloop
"
::= { hwPstnV5PortDataEntry 12 }
hwPstnPortAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPstnPortAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this table are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex,
and hwMD5500PSTNPortIndex."
::= { hwMD5500PSTNPort 3 }
hwPstnPortAttrEntry OBJECT-TYPE
SYNTAX HwPstnPortAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this entry are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex,
and hwMD5500PSTNPortIndex."
INDEX { hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, hwMD5500PSTNPortIndex }
::= { hwPstnPortAttrTable 1 }
HwPstnPortAttrEntry ::=
SEQUENCE {
hwMD5500PSTNPortVoiceGain
INTEGER,
hwMD5500PSTNPortAttribute0
INTEGER,
hwMD5500PSTNPortAttribute1
INTEGER,
hwMD5500PSTNPortRowStatus
RowStatus,
hwMD5500PSTNPortReversePoleLevel
Integer32,
hwMD5500PSTNPortLReversePoleEnable
INTEGER,
hwMD5500PSTNPortUserType
INTEGER,
hwMD5500PSTNPortImpedance
Integer32,
hwMD5500PSTNPortCurrent
Integer32,
hwMD5500PSTNPortDCTime
Integer32,
--The configuration interface is not provided currently, which may be added in the future. Therefore, the code is retained.
--hwMD5500PSTNPortPITime
--INTEGER,
hwMD5500PSTNPortFSKDelayInterval
Integer32,
hwMD5500PSTNPortActualGain
Integer32,
hwMD5500PSTNPortCidTransWhen
INTEGER,
hwMD5500PSTNPortCidFormat
INTEGER,
--P300-YY-Start by Wang Baoxing 2006-8-18
hwMD5500PSTNPortCidReversePole
INTEGER,
--P300-YY-Start by Wang Baoxing 2006-8-18
hwMD5500PSTNPortAGCEnableMarker
INTEGER,
hwMD5500PSTNPortAGCEnableLevel
Integer32,
hwMD5500PSTNPortSNSEnableMarker
INTEGER,
hwMD5500PSTNPortSNSEnableLevel
Integer32,
hwMD5500PSTNPortDspInputGain
Integer32,
hwMD5500PSTNPortDspOutputGain
Integer32,
hwMD5500PSTNPortlinelock
INTEGER
}
hwMD5500PSTNPortVoiceGain OBJECT-TYPE
SYNTAX INTEGER
{
high(1),
low(2),
range1(3),
range2(4),
range3(5),
range4(6),
range5(7),
range6(8),
range7(9),
range8(10),
range9(11),
range10(12),
range11(13),
range12(14),
range13(15),
range14(16),
range15(17),
range16(18),
range17(19),
range18(20),
range19(21),
range20(22),
range21(23),
range22(24),
range23(25),
range24(26),
range25(27),
range26(28),
range27(29),
range28(30),
range29(31),
range29(32),
agc(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.high(1) -indicates the VoiceGain of the PSTN port is high
2.low(2) -indicates the VoiceGain of the PSTN port is low
3.range1(3) -indicates the VoiceGain of the PSTN port is range1
4.range2(4) -indicates the VoiceGain of the PSTN port is range2
5.range3(5) -indicates the VoiceGain of the PSTN port is range3
6.range4(6) -indicates the VoiceGain of the PSTN port is range4
7.range5(7) -indicates the VoiceGain of the PSTN port is range5
8.range6(8) -indicates the VoiceGain of the PSTN port is range6
9.range7(9) -indicates the VoiceGain of the PSTN port is range7
10.range8(10) -indicates the VoiceGain of the PSTN port is range8
11.range9(11) -indicates the VoiceGain of the PSTN port is range9
12.range10(12) -indicates the VoiceGain of the PSTN port is range10
13.range11(13) -indicates the VoiceGain of the PSTN port is range11
14.range12(14) -indicates the VoiceGain of the PSTN port is range12
15.range13(15) -indicates the VoiceGain of the PSTN port is range13
16.range14(16) -indicates the VoiceGain of the PSTN port is range14
17.range15(17) -indicates the VoiceGain of the PSTN port is range15
18.range16(18) -indicates the VoiceGain of the PSTN port is range16
19.range17(19) -indicates the VoiceGain of the PSTN port is range17
20.range18(20) -indicates the VoiceGain of the PSTN port is range18
21.range19(21) -indicates the VoiceGain of the PSTN port is range19
22.range20(22) -indicates the VoiceGain of the PSTN port is range20
23.range21(23) -indicates the VoiceGain of the PSTN port is range21
24.range22(24) -indicates the VoiceGain of the PSTN port is range22
25.range23(25) -indicates the VoiceGain of the PSTN port is range23
26.range24(26) -indicates the VoiceGain of the PSTN port is range24
27.range25(27) -indicates the VoiceGain of the PSTN port is range25
28.range26(28) -indicates the VoiceGain of the PSTN port is range26
29.range27(29) -indicates the VoiceGain of the PSTN port is range27
30.range28(30) -indicates the VoiceGain of the PSTN port is range28
31.range29(31) -indicates the VoiceGain of the PSTN port is range29
32.range29(32) -indicates the VoiceGain of the PSTN port is range30
33.agc(255) -indicates the VoiceGain of the PSTN port is agc
"
DEFVAL { 1 }
::= { hwPstnPortAttrEntry 1 }
hwMD5500PSTNPortAttribute0 OBJECT-TYPE
SYNTAX INTEGER
{
nolimt(1),
limt(2),
mode-DTMF-pulse-dial(3),
mode-DTMF-dial-only(4),
mode-pulse-dial-only(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.nolimt(1) -indicates the attribute of the PSTN port is nolimt
2.limt(2) -indicates the attribute of the PSTN port is limt
3.mode-DTMF-pulse-dial(3) -indicates the dial mode are both pulse and DTMF
4.mode-DTMF-dial-only(4) -indicates the dial mode is only DTMF
5.mode-pulse-dial-only(5) -indicates the dial mode is only pulse
"
::= { hwPstnPortAttrEntry 2 }
hwMD5500PSTNPortAttribute1 OBJECT-TYPE
SYNTAX INTEGER
{
notsupport(1),
support(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.notsupport(1) -indicates the attribute of the PSTN port is not supported
2.support(2) -indicates the attribute of the PSTN port is supported
"
::= { hwPstnPortAttrEntry 3 }
hwMD5500PSTNPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" indicates the row status."
::= { hwPstnPortAttrEntry 4 }
hwMD5500PSTNPortReversePoleLevel OBJECT-TYPE
SYNTAX Integer32 (20..2560)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" indicates the reverse pole level of the PSTN port of md5500"
::= { hwPstnPortAttrEntry 5 }
hwMD5500PSTNPortLReversePoleEnable OBJECT-TYPE
SYNTAX INTEGER
{
reversePoleDisable(1),
reversePoleEnable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.reversePoleDisable(1) -indicates the reverse pole level of the port is disable
2.reversePoleEnable(2) -indicates the reverse pole level of the port is enbale
"
::= { hwPstnPortAttrEntry 6 }
hwMD5500PSTNPortUserType OBJECT-TYPE
SYNTAX INTEGER
{
del(1),
lcpbx(2),
ecpbx(3),
payphone(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.del(1) -indicates the del user
2.lcpbx(2) -indicates the loop calling PBX
3.ecpbx(3) -indicates the earth calling PBX
4.payphone(4) -indicates the payphone"
DEFVAL { 1 }
::= { hwPstnPortAttrEntry 7 }
hwMD5500PSTNPortImpedance OBJECT-TYPE
--P300-YY-Start by Wang Baoxing 2006-8-18
SYNTAX Integer32 (1..15 )
--P300-YY-End by Wang Baoxing 2006-8-18
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Port impedance of the port. The following values indicate different impedances in
different application circumstances.
1 -- Bureau machine in China (200+680|| 100nf)
2 -- User machine in China (200+560|| 100nf)
3 -- 600 ohm interface
4 -- Interface of Russia (150+510|| 47nf)
5 -- (220+820|| 115nf )
6 -- (220+820|| 120nf )
7 -- 900 ohm interface
8 -- Interface of Brazil (800|| 50nf)
9 -- BT0 (Zin=87+1052||228nF+229||28.4nF, Zload=93+615||471nF+179||495nF+244||32nF)
10 -- HK_BT3 (Zin=370+620|| 310nf,Zload=600)
11 -- HK_BT5 (Zin=270+264|| 357nf+1434|| 265nf,Zload=600)
12 -- BT1 (BT0 without AGC)
13 -- BT2 (Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(270 +264 //357nF+1434 //265nF))
14 -- BT3 (Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(164 +162 //363nF+1227 //350nF))
--P300-YY-Start by Wang Baoxing 2006-8-18
15 -- KPN (Zin= 270+750|| 150nf)
--P300-YY-End by Wang Baoxing 2006-8-18
The impedance values of the ports on the board are as follows. Different values correspond to the requirements for the impedance in different application scenarios.
1 -- Bureau device in China (200+680 || 100 nf)
2 -- China subscriber device (200+560 || 100 nf)
3 -- 600 ohm interface
4 -- Interface in Russia (150+510 || 47 nf)
5 -- (220+820 || 115 nf)
6 -- (220+820 || 120 nf)
7 -- 900 ohm interface
8 -- Interface in Brazil (800 || 50 nf)
9 -- BT0 (Zin=87+1052||228nF+229||28.4nF, Zload=93+615||471nF+179||495nF+244||32nF)
10 -- HK_BT3 (Zin=370+620|| 310nf,Zload=600)
11 -- HK_BT5 (Zin=270+264|| 357nf+1434|| 265nf,Zload=600)
12 -- BT1 (BT0 without AGC)
13 -- BT2 (Zin=(87+1052 //228nF+229 //28.4nF),Zload=(270+264 //357nF+1434 //265nF))
14 -- BT3 (Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(164 +162 //363nF+1227 //350nF))
--P300-YY-Start by Wang Baoxing 2006-8-18
15 -- KPN(Zin= 270+750|| 150nf)
--P300-YY-End by Wang Baoxing 2006-8-18
"
DEFVAL { 3 }
::= { hwPstnPortAttrEntry 8 }
hwMD5500PSTNPortCurrent OBJECT-TYPE
SYNTAX Integer32 (1..19)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Port current supported by the board. The value ranges from 1 to 17,
which indicates the port current value supported under certain loopline impedance.
1 -- 25mA steady current
2 -- 16mA steady current
3 -- 32mA steady current
4 -- 40mA steady current
5 -- 35mA 2*200 ohm
6 -- 35mA 2*250 ohm
7 -- 35mA 2*400 ohm
8 -- 47mA 2*200 ohm
9 -- 47mA 2*250 ohm
10 -- 47mA 2*400 ohm
11 -- 20mA 2*200 ohm
12 -- 20mA 2*250 ohm
13 -- 20mA 2*400 ohm
14 -- 30mA 2*200 ohm
15 -- 30mA 2*250 ohm
16 -- 30mA 2*400 ohm
17 -- 40mA 2*200 ohm
18 -- 40mA 2*250 ohm
19 -- 40mA 2*400 ohm
The current values of the ports on the board are as follows.
The following values indicate the current values for different loop resistances of loop lines (for example 2*400 ?).
1 -- 25mA constant current
2 -- 16mA constant current
3 -- 32mA constant current
4 -- 40mA constant current
5 -- 35mA 2*200 ohm
6 -- 35mA 2*250 ohm
7 -- 35mA 2*400 ohm
8 -- 47mA 2*200 ohm
9 -- 47mA 2*250 ohm
10 -- 47mA 2*400 ohm
11 -- 20mA 2*200 ohm
12 -- 20mA 2*250 ohm
13 -- 20mA 2*400 ohm
14 -- 30mA 2*200 ohm
15 -- 30mA 2*250 ohm
16 -- 30mA 2*400 ohm
17 -- 40mA 2*200 ohm
18 -- 40mA 2*250 ohm
19 -- 40mA 2*400 ohm
"
DEFVAL { 1 }
::= { hwPstnPortAttrEntry 9 }
hwMD5500PSTNPortDCTime OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disconnect clear time (*10 ms)."
DEFVAL { 10 }
::= { hwPstnPortAttrEntry 10 }
-- The configuration interface is not provided currently, which may be added in the future. Therefore, the code is retained.
-- hwMD5500PSTNPortPITime OBJECT-TYPE
-- SYNTAX Integer32 (0..20)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Proceed indication time (*10 ms)."
-- DEFVAL { 16 }
-- ::= { hwPstnPortAttrEntry 11 }
hwMD5500PSTNPortFSKDelayInterval OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time length of the delay for transmitting the FSK calling number (unit: 10 ms)."
DEFVAL { 80 }
::= { hwPstnPortAttrEntry 12 }
hwMD5500PSTNPortActualGain OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port actual gain."
::= { hwPstnPortAttrEntry 13 }
hwMD5500PSTNPortCidTransWhen OBJECT-TYPE
SYNTAX INTEGER
{
after-ring(1),
before-ring(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.after-ring(1) -After ringing
2.before-ring(2) -Before ringing
"
DEFVAL { 1 }
::= { hwPstnPortAttrEntry 14 }
hwMD5500PSTNPortCidFormat OBJECT-TYPE
SYNTAX INTEGER
{
sdmf-fsk(1),
mdmf-fsk(2),
dtmf(3),
r15(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.sdmf-fsk(1) -sdmf (FSK simple data message format)
2.mdmf-fsk(2) -mdmf (FSK multi-data message format)
3.dtmf(3) -dtmf (DTMF format)
4.r15(4) -R1.5
"
DEFVAL { 1 }
::= { hwPstnPortAttrEntry 15 }
--P300-YY-Start by Wang Baoxing 2006-8-18
hwMD5500PSTNPortCidReversePole OBJECT-TYPE
SYNTAX INTEGER
{
notsend(1),
send(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The polarity reversal is sent before the calling number is transmitted.
Options:
1.notsend(1)-not send
2.send(2)-send
"
DEFVAL { 1 }
::= { hwPstnPortAttrEntry 16 }
--P300-YY-End by Wang Baoxing 2006-8-18
hwMD5500PSTNPortAGCEnableMarker OBJECT-TYPE
SYNTAX INTEGER
{
agcDisable(1),
agcEnable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.agcDisable(1) -Disable the auto gain control
2.agcEnable(2) -Enable the auto gain control
"
::= { hwPstnPortAttrEntry 17 }
hwMD5500PSTNPortAGCEnableLevel OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Automatic gain control parameter setting.
0-15 maps -9 dbm0 to -24 dbm0.
The default value is 13.
"
::= { hwPstnPortAttrEntry 18 }
hwMD5500PSTNPortSNSEnableMarker OBJECT-TYPE
SYNTAX INTEGER
{
snsDisable(1),
snsEnable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.snsDisable(1) -Disable
2.snsEnable(2) -Enable
"
::= { hwPstnPortAttrEntry 19 }
hwMD5500PSTNPortSNSEnableLevel OBJECT-TYPE
SYNTAX Integer32 (6..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Spectral noise suppression parameter setting (6 db-20 db).
The default value is 12 db.
"
::= { hwPstnPortAttrEntry 20 }
hwMD5500PSTNPortDspInputGain OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DSP input gain of PSTN port parameter setting (PCM->IP, 1-16 correspond to -10 db to +5 db).
The default value is 11.
"
::= { hwPstnPortAttrEntry 21 }
hwMD5500PSTNPortDspOutputGain OBJECT-TYPE
SYNTAX Integer32 (1..21)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DSP output gain of PSTN port parameter setting (IP->PCM, 1-21 correspond to -10 db to +10 db).
The default value is 11.
"
::= { hwPstnPortAttrEntry 22 }
hwMD5500PSTNPortlinelock OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the port can be locked or not. 1. cannot be locked; 2. can be locked.
Options:
1.disable(1) -disable
2.enable(2) -enable
"
DEFVAL { {enable(2)} }
::= { hwPstnPortAttrEntry 23 }
hwPstn16KCAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPstn16KCAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this table are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex,
and hwMD5500PSTNPortIndex."
::= { hwMD5500PSTNPort 5 }
hwPstn16KCAttrEntry OBJECT-TYPE
SYNTAX HwPstn16KCAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this entry are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex,
and hwMD5500PSTNPortIndex."
INDEX { hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, hwMD5500PSTNPortIndex }
::= { hwPstn16KCAttrTable 1 }
HwPstn16KCAttrEntry ::=
SEQUENCE {
hwMD5500PSTNPortHighLevel
Integer32,
hwMD5500PSTNPortLowLevel
Integer32,
hwMD5500PSTNPortKCType
INTEGER,
hwMD5500PSTNPortVoltage
INTEGER,
hwMD5500PSTNPortKCRowStatus
RowStatus
}
hwMD5500PSTNPortHighLevel OBJECT-TYPE
SYNTAX Integer32 (20..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwPstn16KCAttrEntry 1 }
hwMD5500PSTNPortLowLevel OBJECT-TYPE
SYNTAX Integer32 (20..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwPstn16KCAttrEntry 2 }
hwMD5500PSTNPortKCType OBJECT-TYPE
SYNTAX INTEGER
{
port1216kcselector16kc(1),
port1216kcselector12kc(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.port1216kcselector16kc(1) -indicates the Kc type is 16kc
2.port1216kcselector12kc(2) -indicates the Kc type is 12kc
"
::= { hwPstn16KCAttrEntry 3 }
hwMD5500PSTNPortVoltage OBJECT-TYPE
SYNTAX INTEGER
{
port1216kcvalidvoltage0(1),
port1216kcvalidvoltage1(2),
port1216kcvalidvoltage2(3),
port1216kcvalidvoltage3(4),
port1216kcvalidvoltage4(5),
port1216kcvalidvoltage5(6),
port1216kcvalidvoltage6(7),
port1216kcvalidvoltage7(8),
port1216kcvalidvoltage8(9),
port1216kcvalidvoltage9(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.port1216kcvalidvoltage0(1) -indicates the validvoltage value
2.port1216kcvalidvoltage1(2) -indicates the validvoltage value
3.port1216kcvalidvoltage2(3) -indicates the validvoltage value
4.port1216kcvalidvoltage3(4) -indicates the validvoltage value
5.port1216kcvalidvoltage4(5) -indicates the validvoltage value
6.port1216kcvalidvoltage5(6) -indicates the validvoltage value
7.port1216kcvalidvoltage6(7) -indicates the validvoltage value
8.port1216kcvalidvoltage7(8) -indicates the validvoltage value
9.port1216kcvalidvoltage8(9) -indicates the validvoltage value
10.port1216kcvalidvoltage9(10) -indicates the validvoltage value
"
::= { hwPstn16KCAttrEntry 4 }
hwMD5500PSTNPortKCRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" indicates the the row status."
::= { hwPstn16KCAttrEntry 5 }
-- Description of virtual user on the V5 port
hwV5VirPortDesTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwV5VirPortDesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this table are hwMD5500VirtualuserLEID, hwMD5500VirtualuserAdrrType,
and hwMD5500VirtualAddress."
::= { hwMD5500PSTNPort 6 }
hwV5VirPortDesEntry OBJECT-TYPE
SYNTAX HwV5VirPortDesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this entry are hwMD5500VirtualuserLEID, hwMD5500VirtualuserAdrrType,
and hwMD5500VirtualAddress."
INDEX { hwMD5500VirtualuserLEID, hwMD5500VirtualuserAdrrType, hwMD5500VirtualAddress }
::= { hwV5VirPortDesTable 1 }
HwV5VirPortDesEntry ::=
SEQUENCE {
hwMD5500VirtualuserLEID
Integer32,
hwMD5500VirtualuserAdrrType
INTEGER,
hwMD5500VirtualAddress
Integer32,
hwMD5500VirtualPortType
INTEGER,
hwMD5500VirtualPortGroup
Integer32,
hwMD5500VirtualRowStatus
RowStatus
}
hwMD5500VirtualuserLEID OBJECT-TYPE
SYNTAX Integer32 (0..16777215)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
LEV5 interface ID "
::= { hwV5VirPortDesEntry 1 }
hwMD5500VirtualuserAdrrType OBJECT-TYPE
SYNTAX INTEGER
{
l3address(1),
efaddress(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Options:
1.l3address(1) -indicates the addr type is l3
2.efaddress(2) -indicates the addr type is efa
"
::= { hwV5VirPortDesEntry 2 }
hwMD5500VirtualAddress OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Address "
::= { hwV5VirPortDesEntry 3 }
hwMD5500VirtualPortType OBJECT-TYPE
SYNTAX INTEGER
{
pstnPort(1),
braPort(2),
praPort(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.pstnPort(1) -indicates the port type is pstnPort
2.braPort(2) -indicates the port type is braPort
3.praPort(3) -indicates the port type is praPort
"
::= { hwV5VirPortDesEntry 4 }
hwMD5500VirtualPortGroup OBJECT-TYPE
SYNTAX Integer32 (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Port group number."
::= { hwV5VirPortDesEntry 5 }
hwMD5500VirtualRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Row status."
::= { hwV5VirPortDesEntry 6 }
-- System parameter configuration table
hwSysParaConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSysParaConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"System parameter configuration table.
The index of this table is hwSysParaConfigSerialNum."
::= { hwMD5500PSTNPort 7 }
hwSysParaConfigEntry OBJECT-TYPE
SYNTAX HwSysParaConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"System parameter configuration table.
The index of this entry is hwSysParaConfigSerialNum."
INDEX { hwSysParaConfigSerialNum }
::= { hwSysParaConfigTable 1 }
HwSysParaConfigEntry ::=
SEQUENCE {
hwSysParaConfigSerialNum
Integer32,
hwSysParaValue
Integer32
}
hwSysParaConfigSerialNum OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
System parameter ID"
::= { hwSysParaConfigEntry 1 }
hwSysParaValue OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
System parameter value."
::= { hwSysParaConfigEntry 2 }
-- Overseas parameter configuration table
hwOverSeaConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOverSeaConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Find and configure the oversea parameters according to the hwOverSeaConfigSerialNum.
The index of this table is hwOverSeaConfigSerialNum."
::= { hwMD5500PSTNPort 8 }
hwOverSeaConfigEntry OBJECT-TYPE
SYNTAX HwOverSeaConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Find and configure the oversea parameters according to the hwOverSeaConfigSerialNum.
The index of this entry is hwOverSeaConfigSerialNum."
INDEX { hwOverSeaConfigSerialNum }
::= { hwOverSeaConfigTable 1 }
HwOverSeaConfigEntry ::=
SEQUENCE {
hwOverSeaConfigSerialNum
Integer32,
hwOverSeaValue
Integer32
}
hwOverSeaConfigSerialNum OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Overseas parameter ID."
::= { hwOverSeaConfigEntry 1 }
hwOverSeaValue OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Oversea parameter value."
::= { hwOverSeaConfigEntry 2 }
hwPortGlobalAttrTable OBJECT IDENTIFIER ::= { hwMD5500PSTNPort 9}
hwPortGlobalAttrTANSON OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Sets the eliminating jitter time during the PSTN port on-hook signaling state.
1 -- 50ms
2 -- 100ms
3 -- 150ms
4 -- 200ms
"
::= { hwPortGlobalAttrTable 1 }
hwPortGlobalAttrTANSOFF OBJECT-TYPE
SYNTAX Integer32 (15..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Sets the eliminating jitter time during the PSTN port off-hook state.
15 -- 150ms
16 -- 160ms
17 -- 170ms
18 -- 180ms
19 -- 190ms
20 -- 200ms
"
::= { hwPortGlobalAttrTable 2 }
hwMD5500BRAPort OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 7 }
-- Data table of the BRA port
hwIsdnPhyPortDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIsdnPhyPortDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this table are hwMD5500BRAPortFrameIndex, hwMD5500BRAPortSlotIndex,
and hwMD5500BRAPortIndex."
::= { hwMD5500BRAPort 1 }
hwIsdnPhyPortDataEntry OBJECT-TYPE
SYNTAX HwIsdnPhyPortDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this entry are hwMD5500BRAPortFrameIndex, hwMD5500BRAPortSlotIndex,
and hwMD5500BRAPortIndex."
INDEX { hwMD5500BRAPortFrameIndex, hwMD5500BRAPortSlotIndex, hwMD5500BRAPortIndex }
::= { hwIsdnPhyPortDataTable 1 }
HwIsdnPhyPortDataEntry ::=
SEQUENCE {
hwMD5500BRAPortFrameIndex
Integer32,
hwMD5500BRAPortSlotIndex
Integer32,
hwMD5500BRAPortIndex
Integer32,
hwMD5500BRAPortV5ID
Integer32,
hwMD5500BRAPortGrpNo
Integer32,
hwMD5500BRAEfAddr
Integer32,
hwMD5500BRAV51Ts1
Integer32,
hwMD5500BRAV51Ts2
Integer32,
hwMD5500BRATelNo
OCTET STRING,
hwMD5500BRAServiceType
INTEGER,
hwMD5500BRAFSMState
INTEGER,
hwMD5500BRAPortState
INTEGER,
hwMD5500BRAOperate
INTEGER,
hwMD5500BRAMaintainStatus
INTEGER,
hwMD5500BRARowStatus
RowStatus
}
hwMD5500BRAPortFrameIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwIsdnPhyPortDataEntry 1 }
hwMD5500BRAPortSlotIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwIsdnPhyPortDataEntry 2 }
hwMD5500BRAPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwIsdnPhyPortDataEntry 3 }
hwMD5500BRAPortV5ID OBJECT-TYPE
SYNTAX Integer32 (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwIsdnPhyPortDataEntry 4 }
hwMD5500BRAPortGrpNo OBJECT-TYPE
SYNTAX Integer32 (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwIsdnPhyPortDataEntry 5 }
hwMD5500BRAEfAddr OBJECT-TYPE
SYNTAX Integer32 (0..8175)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwIsdnPhyPortDataEntry 6 }
hwMD5500BRAV51Ts1 OBJECT-TYPE
SYNTAX Integer32 (1..15 | 17..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwIsdnPhyPortDataEntry 7 }
hwMD5500BRAV51Ts2 OBJECT-TYPE
SYNTAX Integer32 (1..15 | 17..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwIsdnPhyPortDataEntry 8 }
hwMD5500BRATelNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwIsdnPhyPortDataEntry 9 }
hwMD5500BRAServiceType OBJECT-TYPE
SYNTAX INTEGER
{
currenser(1),
insidespc(2),
v5spc(3),
v5preconn(4),
hireline(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.currenser(1) -indicates the type is currenser
2.insidespc(2) -indicates the type is insidespc
3.v5spc(3) -indicates the type is v5spc
4.v5preconn(4) -indicates the type is v5preconn
5.hireline(5) -indicates the type is hireline
"
::= { hwIsdnPhyPortDataEntry 10 }
hwMD5500BRAFSMState OBJECT-TYPE
SYNTAX INTEGER
{
an10(1),
an11(2),
an12(3),
an20(4),
an21(5),
an22(6),
an31(7),
an32(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.an10(1) -indicates the state is an10
2.an11(2) -indicates the state is an11
3.an12(3) -indicates the state is an12
4.an20(4) -indicates the state is an20
5.an21(5) -indicates the state is an21
6.an22(6) -indicates the state is an22
7.an31(7) -indicates the state is an31
8.an32(8) -indicates the state is an32
"
::= { hwIsdnPhyPortDataEntry 11 }
hwMD5500BRAPortState OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
inactive(2),
fault(3),
test(4),
maintain(5),
localblock(6),
oppblock(7),
lock(8),
busy(9),
viruser(10),
farloop(11),
nearloop(12),
b1codetest(13),
b2codetest(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.active(1) -indicates the port state is active
2.inactive(2) -indicates the port state is inactive
3.fault(3) -indicates the port state is fault
4.test(4) -indicates the port state is test
5.maintain(5) -indicates the port state is maintain
6.localblock(6) -indicates the port state is localblock
7.oppblock(7) -indicates the port state is oppblock
8.lock(8) -indicates the port state is lock
9.busy(9) -indicates the port state is busy
10.viruser(10) -indicates the port state is viruser
11.farloop(11) -indicates the port state is farloop
12.nearloop(12) -indicates the port state is nearloop
13.b1codetest(13) -indicates the port state is b1codetest
14.b2codetest(14) -indicates the port state is b2codetest
"
::= { hwIsdnPhyPortDataEntry 12 }
hwMD5500BRAOperate OBJECT-TYPE
SYNTAX INTEGER
{
block(1),
delayblock(2),
unblock(3),
reset(4),
nearloop(5),
farloop(6),
unloop(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.block(1) -indicates the operation is block
2.delayblock(2) -indicates the operation is delayblock
3.unblock(3) -indicates the operation is unblock
4.reset(4) -indicates the operation is reset
5.nearloop(5) -indicates the operation is nearloop
6.farloop(6) -indicates the operation is farloop
7.unloop(7) -indicates the operation is unloop
"
::= { hwIsdnPhyPortDataEntry 13 }
hwMD5500BRAMaintainStatus OBJECT-TYPE
SYNTAX INTEGER
{
mgcfged(1),
v5cfged(2),
notcfged(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.mgcfged(1) -indicates the maintainstatus of the PSTN port is mgcfged
2.v5cfged(2) -indicates the maintainstatus of the PSTN port is v5cfged
3.notcfged(3) -indicates the maintainstatus of the PSTN port is notcfged
"
::= { hwIsdnPhyPortDataEntry 14 }
hwMD5500BRARowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwIsdnPhyPortDataEntry 15 }
-- Data table of the port
hwIsdnV5PortDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIsdnV5PortDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Data table of the port.
The indexes of this table are hwMD5500BRAPortV5IDIndex and hwMD5500BRAPortEFAddrIndex."
::= { hwMD5500BRAPort 2 }
hwIsdnV5PortDataEntry OBJECT-TYPE
SYNTAX HwIsdnV5PortDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Data table of the port.
The indexes of this entry are hwMD5500BRAPortV5IDIndex and hwMD5500BRAPortEFAddrIndex."
INDEX { hwMD5500BRAPortV5IDIndex, hwMD5500BRAPortEFAddrIndex }
::= { hwIsdnV5PortDataTable 1 }
HwIsdnV5PortDataEntry ::=
SEQUENCE {
hwMD5500BRAPortV5IDIndex
Integer32,
hwMD5500BRAPortEFAddrIndex
Integer32,
hwMD5500BRAPortFrameID
Integer32,
hwMD5500BRAPortSlotID
Integer32,
hwMD5500BRAPortID
Integer32,
hwMD5500BRAPortPortGrpNo
Integer32,
hwMD5500BRAPortV51Ts1
Integer32,
hwMD5500BRAPortV51Ts2
Integer32,
hwMD5500BRAPortTelNo
OCTET STRING,
hwMD5500BRAPortServiceType
INTEGER,
hwMD5500BRAPortFSMState
INTEGER,
hwMD5500BRAPortPortState
INTEGER,
hwMD5500BRAPortOperate
INTEGER
}
hwMD5500BRAPortV5IDIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwIsdnV5PortDataEntry 1 }
hwMD5500BRAPortEFAddrIndex OBJECT-TYPE
SYNTAX Integer32 (0..8175)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwIsdnV5PortDataEntry 2 }
hwMD5500BRAPortFrameID OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwIsdnV5PortDataEntry 3 }
hwMD5500BRAPortSlotID OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwIsdnV5PortDataEntry 4 }
hwMD5500BRAPortID OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwIsdnV5PortDataEntry 5 }
hwMD5500BRAPortPortGrpNo OBJECT-TYPE
SYNTAX Integer32 (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwIsdnV5PortDataEntry 6 }
hwMD5500BRAPortV51Ts1 OBJECT-TYPE
SYNTAX Integer32 (1..15 | 17..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwIsdnV5PortDataEntry 7 }
hwMD5500BRAPortV51Ts2 OBJECT-TYPE
SYNTAX Integer32 (1..15 | 17..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwIsdnV5PortDataEntry 8 }
hwMD5500BRAPortTelNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { hwIsdnV5PortDataEntry 9 }
hwMD5500BRAPortServiceType OBJECT-TYPE
SYNTAX INTEGER
{
currenser(1),
insidespc(2),
v5spc(3),
v5preconn(4),
hireline(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.currenser(1) -indicates the type is currenser
2.insidespc(2) -indicates the type is insidespc
3.v5spc(3) -indicates the type is v5spc
4.v5preconn(4) -indicates the type is v5preconn
5.hireline(5) -indicates the type is hireline
"
::= { hwIsdnV5PortDataEntry 10 }
hwMD5500BRAPortFSMState OBJECT-TYPE
SYNTAX INTEGER
{
an10(1),
an11(2),
an12(3),
an20(4),
an21(5),
an22(6),
an31(7),
an32(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.an10(1) -indicates the state is an10
2.an11(2) -indicates the state is an11
3.an12(3) -indicates the state is an12
4.an20(4) -indicates the state is an20
5.an21(5) -indicates the state is an21
6.an22(6) -indicates the state is an22
7.an31(7) -indicates the state is an31
8.an32(8) -indicates the state is an32
"
::= { hwIsdnV5PortDataEntry 11 }
hwMD5500BRAPortPortState OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
inactive(2),
fault(3),
test(4),
maintain(5),
localblock(6),
oppblock(7),
lock(8),
busy(9),
viruser(10),
farloop(11),
nearloop(12),
b1codetest(13),
b2codetest(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options:
1.active(1) -indicates the port state is active
2.inactive(2) -indicates the port state is inactive
3.fault(3) -indicates the port state is fault
4.test(4) -indicates the port state is test
5.maintain(5) -indicates the port state is maintain
6.localblock(6) -indicates the port state is localblock
7.oppblock(7) -indicates the port state is oppblock
8.lock(8) -indicates the port state is lock
9.busy(9) -indicates the port state is busy
10.viruser(10) -indicates the port state is viruser
11.farloop(11) -indicates the port state is farloop
12.nearloop(12) -indicates the port state is nearloop
13.b1codetest(13) -indicates the port state is b1codetest
14.b2codetest(14) -indicates the port state is b2codetest
"
::= { hwIsdnV5PortDataEntry 12 }
hwMD5500BRAPortOperate OBJECT-TYPE
SYNTAX INTEGER
{
block(1),
delayblock(2),
unblock(3),
reset(4),
nearloop(5),
farloop(6),
unloop(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1.block(1) -indicates the operation is block
2.delayblock(2) -indicates the operation is delayblock
3.unblock(3) -indicates the operation is unblock
4.reset(4) -indicates the operation is reset
5.nearloop(5) -indicates the operation is nearloop
6.farloop(6) -indicates the operation is farloop
7.unloop(7) -indicates the operation is unloop
"
::= { hwIsdnV5PortDataEntry 13 }
-- hwIsdnBraPortAttrTable parameters
hwIsdnBraPortAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIsdnBraPortAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Configuration table of the ISDN BRA port attributes.
The index of this table is hwIsdnBraPortIndex.
"
::= { hwMD5500BRAPort 3 }
hwIsdnBraPortAttrEntry OBJECT-TYPE
SYNTAX HwIsdnBraPortAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Configuration table of the ISDN BRA port attributes.
The index of this entry is hwIsdnBraPortIndex.
"
INDEX {
hwIsdnBraPortIndex
}
::= { hwIsdnBraPortAttrTable 1 }
HwIsdnBraPortAttrEntry ::=
SEQUENCE
{
hwIsdnBraPortIndex Integer32,
hwMgIsdnTerminationRPower INTEGER,
hwIsdnbraPortWorkMode INTEGER,
hwIsdnbraPortBad INTEGER,
hwIsdnbraPortBadDelay Integer32,
hwMgIsdnBraCodeMode INTEGER,
hwMgIsdnBraL1ActiveMode INTEGER,
hwMgIsdnBraL2InfoMonitorEnable INTEGER
}
hwIsdnBraPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Shelf/Slot/Port
"
::= { hwIsdnBraPortAttrEntry 1 }
hwMgIsdnTerminationRPower OBJECT-TYPE
SYNTAX INTEGER{disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Whether the remote supply is supported. 0-Disable; 1-Enable.
Options:
1. disable(0) -Disable the remote supply
2. enable(1) -Enable the remote supply
"
::= { hwIsdnBraPortAttrEntry 2 }
hwIsdnbraPortWorkMode OBJECT-TYPE
SYNTAX INTEGER{p2mp(0), p2p(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The change of the working mode of the BRA port may take effect after the board is reset. If the board type is H601DSLD, it need not be reset. If the board type is DSL, it needs to be reset.
Options:
1.p2mp(0) --point to multi-points
2.p2p(1) --point to point
"
::= { hwIsdnBraPortAttrEntry 3 }
hwIsdnbraPortBad OBJECT-TYPE
SYNTAX INTEGER{disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Options:
1.disable(0) -disable
2.enable(1) -enable
"
::= { hwIsdnBraPortAttrEntry 4 }
hwIsdnbraPortBadDelay OBJECT-TYPE
SYNTAX Integer32(10..360)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Deactivation delay of the BRA basic access (unit: second)
"
::= { hwIsdnBraPortAttrEntry 5 }
hwMgIsdnBraCodeMode OBJECT-TYPE
SYNTAX INTEGER{code-2B1Q(0), code-4B3T(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Options:
1.code-2B1Q(0) -indicates the mode is 2b1q
2.code-4B3T(1) -indicates the mode is 4b3t
"
::= { hwIsdnBraPortAttrEntry 6 }
hwMgIsdnBraL1ActiveMode OBJECT-TYPE
SYNTAX INTEGER{longActive(1),notLongActive(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Options:
1.longActive(1) --stable-active
2.notLongActive(2) --unstable-active
"
DEFVAL { {longActive(1)} }
::= { hwIsdnBraPortAttrEntry 7 }
hwMgIsdnBraL2InfoMonitorEnable OBJECT-TYPE
SYNTAX INTEGER{disable(1),enable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Options:
1.disable(1) -disable the bra l2 monitor
2.enable(2) -enable the bra l2 monitor
"
DEFVAL { {enable(2)} }
::= { hwIsdnBraPortAttrEntry 8 }
-- hwIsdnPortPerformanceStatTable parameters
hwIsdnPortPerformanceStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIsdnPortPerformanceStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Configuration table of the ISDN BRA performance statistics function.
The index of this table is hwIsdnPortIndex.
"
::= { hwMD5500BRAPort 4 }
hwIsdnPortPerformanceStatEntry OBJECT-TYPE
SYNTAX HwIsdnPortPerformanceStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Configuration table of the ISDN BRA performance statistics function.
The index of this entry is hwIsdnPortIndex.
"
INDEX {
hwIsdnPortIndex
}
::= { hwIsdnPortPerformanceStatTable 1 }
HwIsdnPortPerformanceStatEntry ::=
SEQUENCE
{
hwIsdnPortIndex Integer32,
hwIsdnPortPerformanceStatOprType INTEGER,
hwIsdnPortPerformanceStatPeri Integer32,
hwIsdnPortErrorcode Integer32,
hwIsdnPortNebeUas Integer32,
hwIsdnPortFebeUas Integer32,
hwIsdnPortNebeEs Integer32,
hwIsdnPortFebeEs Integer32,
hwIsdnPortNebeSes Integer32,
hwIsdnPortFebeSes Integer32
}
hwIsdnPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Shelf/Slot/Port
"
::= { hwIsdnPortPerformanceStatEntry 1 }
hwIsdnPortPerformanceStatOprType OBJECT-TYPE
SYNTAX INTEGER{stop(0), start(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Options:
1.stop(0) -stop the performance statistics
2.start(1) -start the performance statistics
"
::= { hwIsdnPortPerformanceStatEntry 2 }
hwIsdnPortPerformanceStatPeri OBJECT-TYPE
SYNTAX Integer32(0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Starting cycle (minute).
"
::= { hwIsdnPortPerformanceStatEntry 3 }
hwIsdnPortErrorcode OBJECT-TYPE
SYNTAX Integer32(0 |50..84)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Error bit threshold setting.
"
::= { hwIsdnPortPerformanceStatEntry 4 }
hwIsdnPortNebeUas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Near end block error (NEBE).
"
::= { hwIsdnPortPerformanceStatEntry 5 }
hwIsdnPortFebeUas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Far end block error (FEBE).
"
::= { hwIsdnPortPerformanceStatEntry 6 }
hwIsdnPortNebeEs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Near end block error (NEBE) errored second (s).
"
::= { hwIsdnPortPerformanceStatEntry 7 }
hwIsdnPortFebeEs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Far end block error (FEBE) errored second (s).
"
::= { hwIsdnPortPerformanceStatEntry 8 }
hwIsdnPortNebeSes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Near end block error (NEBE) severely errored second (s).
"
::= { hwIsdnPortPerformanceStatEntry 9 }
hwIsdnPortFebeSes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Far end block error (FEBE) severely errored second (s).
"
::= { hwIsdnPortPerformanceStatEntry 10 }
hwIsdnBraL1CRCErrTable OBJECT IDENTIFIER ::= { hwMD5500BRAPort 5}
hwIsdnBraL1DMDegradedThreshold OBJECT-TYPE
SYNTAX Integer32(1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
BRA degraded-minutes degrade threshold.
"
::= { hwIsdnBraL1CRCErrTable 1 }
hwIsdnBraL1ESDegradedThreshold OBJECT-TYPE
SYNTAX Integer32(1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
BRA errored-seconds degrade threshold.
"
::= { hwIsdnBraL1CRCErrTable 2 }
hwIsdnBraL1CSESDegradedThreshold OBJECT-TYPE
SYNTAX Integer32(1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
BRA consecutive-severely-errored-seconds degrade threshold.
"
::= { hwIsdnBraL1CRCErrTable 3 }
hwIsdnBraL1DMAlarmThreshold OBJECT-TYPE
SYNTAX Integer32(1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
BRA consecutive-severely-errored-seconds degrade threshold.
"
::= { hwIsdnBraL1CRCErrTable 4 }
hwIsdnBraL1ESAlarmThreshold OBJECT-TYPE
SYNTAX Integer32(1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
BRA errored-seconds alarm threshold.
"
::= { hwIsdnBraL1CRCErrTable 5 }
hwIsdnBraL1CSESAlarmThreshold OBJECT-TYPE
SYNTAX Integer32(1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
BRA consecutive-severely-errored-seconds alarm threshold.
"
::= { hwIsdnBraL1CRCErrTable 6 }
hwIsdnBraL1CRCErrESThreshold OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
BRA errored-seconds define threshold.
"
::= { hwIsdnBraL1CRCErrTable 7 }
hwIsdnBraL1CRCErrSESThreshold OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
BRA severely-errored-seconds define threshold.
"
::= { hwIsdnBraL1CRCErrTable 8 }
hwIsdnBraL1CRCErrDMThreshold OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
BRA degraded-minutes define threshold.
"
::= { hwIsdnBraL1CRCErrTable 9 }
hwIsdnTEICheckCfgTable OBJECT IDENTIFIER ::= { hwMD5500BRAPort 6}
hwIsdnTEICheckCycle OBJECT-TYPE
SYNTAX Integer32(0..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
TEI check period (unit: minute).
"
::= { hwIsdnTEICheckCfgTable 1 }
hwIsdnL2DegradedAlarmCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIsdnL2DegradedAlarmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
ISDN L2 degraded alarm configuration table.
The index of this table is hwIsdnBraL2DAPortIndex.
"
::= { hwMD5500BRAPort 7 }
hwIsdnL2DegradedAlarmCfgEntry OBJECT-TYPE
SYNTAX HwIsdnL2DegradedAlarmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
ISDN L2 degraded alarm configuration table.
The index of this entry is hwIsdnBraL2DAPortIndex."
INDEX {
hwIsdnBraL2DAPortIndex
}
::= { hwIsdnL2DegradedAlarmCfgTable 1 }
HwIsdnL2DegradedAlarmCfgEntry ::=
SEQUENCE
{
hwIsdnBraL2DAPortIndex Integer32,
hwIsdnBraL2DAUnexpectRespondThreshold Integer32,
hwIsdnBraL2DARebuiltLinkRequestThreshold Integer32,
hwIsdnBraL2DAN200OutTimeThreshold Integer32,
hwIsdnBraL2DAQ921AddrDomainErrThreshold Integer32,
hwIsdnBraL2DAMDLERRJThreshold Integer32,
hwIsdnBraL2DAMDLERRKThreshold Integer32,
hwIsdnBraL2DAMDLERRLThreshold Integer32,
hwIsdnBraL2DAMDLERRMThreshold Integer32,
hwIsdnBraL2DAMDLERRNThreshold Integer32,
hwIsdnBraL2DAMDLERROThreshold Integer32,
hwIsdnBraL2DAFrameSNErrThreshold Integer32,
hwIsdnBraL2DABufferOverFlowThreshold Integer32
}
hwIsdnBraL2DAPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Port index. Shelf<<24|Slot<<16|Port.
"
::= { hwIsdnL2DegradedAlarmCfgEntry 1 }
hwIsdnBraL2DAUnexpectRespondThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Unsolicited responses received.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 2 }
hwIsdnBraL2DARebuiltLinkRequestThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Peer initiated re-establishments when in multiple frame established state.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 3 }
hwIsdnBraL2DAN200OutTimeThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Unsuccessful re-transmissions N200 times.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 4 }
hwIsdnBraL2DAQ921AddrDomainErrThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Q.921 address field errors.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 5 }
hwIsdnBraL2DAMDLERRJThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Q.921 MDL errors J.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 6 }
hwIsdnBraL2DAMDLERRKThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Q.921 MDL errors K.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 7 }
hwIsdnBraL2DAMDLERRLThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Invalid/Unrecognized frame.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 8 }
hwIsdnBraL2DAMDLERRMThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Unexpected/Not permitted I-field received.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 9 }
hwIsdnBraL2DAMDLERRNThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Q.921 MDL errors N.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 10 }
hwIsdnBraL2DAMDLERROThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Excess octets in the information field.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 11 }
hwIsdnBraL2DAFrameSNErrThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Frame check sequence errors.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 12 }
hwIsdnBraL2DABufferOverFlowThreshold OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Limit of buffer overflows.
"
DEFVAL { 0 }
::= { hwIsdnL2DegradedAlarmCfgEntry 13 }
hwMD5500PortStateTrace OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 10 }
--MIB table of the status-tracking LED
hwPortStateTraceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortStateTraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MIB table of this status-tracking LED.
The index of this table is hwPortStateTraceFrameId.
"
::= { hwMD5500PortStateTrace 1 }
hwPortStateTraceEntry OBJECT-TYPE
SYNTAX HwPortStateTraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MIB table of this status-tracking LED.
The index of this entry is hwPortStateTraceFrameId.
"
INDEX { hwPortStateTraceFrameId}
::= { hwPortStateTraceTable 1 }
HwPortStateTraceEntry ::=
SEQUENCE
{
hwPortStateTraceFrameId Integer32,
hwPortStateTraceOprType INTEGER
}
hwPortStateTraceFrameId OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Frame ID(0..240)
Shelf ID (0..240)."
::= {hwPortStateTraceEntry 1}
hwPortStateTraceOprType OBJECT-TYPE
SYNTAX INTEGER{stop(1), start(2) , handshake(3)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation type (enumerated: 1-stop port status reporting; 2-start port status reporting; 3-handshake)
Options:
1.stop(1) -stop the trace
2.start(2) -start the trace
3.handshake(3) -indicates the handshake of the trace
"
::= { hwPortStateTraceEntry 2 }
-- SPCM port MIB
hwMD5500SPCMPort OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 11 }
hwMD5500SPCMPortPhyTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMD5500SPCMPortPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this table are hwMD5500SPCMPortFrameIndex, hwMD5500SPCMPortSlotIndex,
and hwMD5500SPCMPortIndex."
::= { hwMD5500SPCMPort 1 }
hwMD5500SPCMPortPhyEntry OBJECT-TYPE
SYNTAX HwMD5500SPCMPortPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this entry are hwMD5500SPCMPortFrameIndex, hwMD5500SPCMPortSlotIndex,
and hwMD5500SPCMPortIndex.
"
INDEX { hwMD5500SPCMPortFrameIndex, hwMD5500SPCMPortSlotIndex, hwMD5500SPCMPortIndex }
::= { hwMD5500SPCMPortPhyTable 1 }
HwMD5500SPCMPortPhyEntry ::=
SEQUENCE {
hwMD5500SPCMPortFrameIndex
Integer32,
hwMD5500SPCMPortSlotIndex
Integer32,
hwMD5500SPCMPortIndex
Integer32,
hwMD5500SPCMInterfaceID
Integer32,
hwMD5500SPCMCASE1Ts
Integer32,
hwMD5500SPCMtelNo
OCTET STRING,
hwMD5500SPCMPortState
INTEGER,
hwMD5500SPCMServiceState
INTEGER,
hwMD5500SPCMOperate
INTEGER,
hwMD5500SPCMPortMaintainStatus
INTEGER,
hwMD5500SPCMRowStatus
RowStatus
}
hwMD5500SPCMPortFrameIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwMD5500SPCMPortPhyEntry 1 }
hwMD5500SPCMPortSlotIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwMD5500SPCMPortPhyEntry 2 }
hwMD5500SPCMPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwMD5500SPCMPortPhyEntry 3 }
hwMD5500SPCMInterfaceID OBJECT-TYPE
SYNTAX Integer32 (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwMD5500SPCMPortPhyEntry 4 }
hwMD5500SPCMCASE1Ts OBJECT-TYPE
SYNTAX Integer32 (1..15 | 17..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwMD5500SPCMPortPhyEntry 5 }
hwMD5500SPCMtelNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwMD5500SPCMPortPhyEntry 6 }
hwMD5500SPCMPortState OBJECT-TYPE
SYNTAX INTEGER
{
idle(1),
fault(2),
test(3),
maintain(4),
localblock(5),
oppblock(6),
lock(7),
busy(8),
viruser(9),
farloop(10),
nearloop(11),
b1codetest(12),
b2codetest(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Options:
1.idle(1) -indicates the port state is idle
2.fault(2) -indicates the port state is fault
3.test(3) -indicates the port state is test
4.maintain(4) -indicates the port state is maintain
5.localblock(5) -indicates the port state is localblock
6.oppblock(6) -indicates the port state is oppblock
7.lock(7) -indicates the port state is lock
8.busy(8) -indicates the port state is busy
9.viruser(9) -indicates the port state is viruser
10.farloop(10) -indicates the port state is farloop
11.nearloop(11) -indicates the port state is nearloop
12.b1codetest(12) -indicates the port state is b1codetest
13.b2codetest(13) -indicates the port state is b2codetest
"
::= { hwMD5500SPCMPortPhyEntry 7 }
hwMD5500SPCMServiceState OBJECT-TYPE
SYNTAX INTEGER
{
outofservice(1),
idle(2),
calling(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Options:
1.outofservice(1) -indicates the service state is outofservice
2.idle(2) -indicates the service state is idle
3.calling(3) -indicates the service state is calling
"
::= { hwMD5500SPCMPortPhyEntry 8 }
hwMD5500SPCMOperate OBJECT-TYPE
SYNTAX INTEGER
{
reset(4),
nearloop(5),
unloop(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Options:
1.reset(4) -Operation is reset
2.nearloop(5) -Operation is near loop
3.unloop(6) -Operation is not loop
"
::= { hwMD5500SPCMPortPhyEntry 9 }
hwMD5500SPCMPortMaintainStatus OBJECT-TYPE
SYNTAX INTEGER
{
mgcfged(1),
v5cfged(2),
notcfged(3),
spcmcfged(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Options:
1.mgcfged(1) -indicates the maintainstatus of the PSTN port is mgcfged
2.v5cfged(2) -indicates the maintainstatus of the PSTN port is v5cfged
3.notcfged(3) -indicates the maintainstatus of the PSTN port is notcfged
4.spcmcfged(4) -indicates the maintainstatus of the PSTN port is spcmcfged
"
::= { hwMD5500SPCMPortPhyEntry 10 }
hwMD5500SPCMRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { hwMD5500SPCMPortPhyEntry 11 }
hwNarrowUserDataTrapSequence OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 12 }
hwNarrowUserDataChangeSequencePstnV5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Serial number for reporting traps after the V5 PSTN user data changes.
"
::= { hwNarrowUserDataTrapSequence 1 }
hwNarrowUserDataChangeSequencePstnMG OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Serial number for reporting traps after the MG PSTN user data changes.
"
::= { hwNarrowUserDataTrapSequence 2 }
hwNarrowUserDataChangeSequencePstnSPCM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Serial number for reporting traps after the SPCM PSTN user data changes.
"
::= { hwNarrowUserDataTrapSequence 3 }
hwNarrowUserDataChangeSequenceIsdnV5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Serial number for reporting traps after the V5 ISDN user data changes.
"
::= { hwNarrowUserDataTrapSequence 4 }
hwNarrowUserDataChangeSequenceIsdnMG OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Serial number for reporting traps after the MG ISDN user data changes.
"
::= { hwNarrowUserDataTrapSequence 5 }
hwNarrowUserDataChangeSequenceDdiMG OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Serial number for reporting traps after the MG PSTN user data changes.
"
::= { hwNarrowUserDataTrapSequence 6 }
hwNarrowUserDataChangeSequenceCdiPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Serial number for reporting the traps after the CDI PORT attributes change.
"
::= { hwNarrowUserDataTrapSequence 7 }
hwNarrowUserDataChangeSequenceVfbPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Serial number for reporting the traps after the VFB PORT attributes change.
"
::= { hwNarrowUserDataTrapSequence 8 }
hwNarrowUserDataChangeSequencePraV5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Serial number for reporting the traps after the V5 PRA user data changes.
"
::= { hwNarrowUserDataTrapSequence 9 }
hwNarrowUserDataChangeSequencePraMG OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Serial number for reporting the traps after the MG PRA user data changes.
"
::= { hwNarrowUserDataTrapSequence 10 }
hwPortStateTraceTraps OBJECT IDENTIFIER ::= { hwMD5500PortStateTrace 2 }
hwPortStateTraceTrapVbOids OBJECT IDENTIFIER ::= { hwPortStateTraceTraps 1}
hwPortStateTraceFrame OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Shelf ID
"
::= { hwPortStateTraceTrapVbOids 1 }
hwPortStateTracePortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Number of ports reported each time.
"
::= { hwPortStateTraceTrapVbOids 2 }
hwPortStateTraceSlotId OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Slot ID in which the port is located
"
::= { hwPortStateTraceTrapVbOids 3 }
hwPortStateTracePortId OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Port ID.
"
::= { hwPortStateTraceTrapVbOids 4 }
hwPortStateTracePortState OBJECT-TYPE
SYNTAX INTEGER
{
fault(1),
testing(2),
lock(3),
idle(4),
busy(5),
remoteloop(6),
localloop(7),
deactive(8),
active(9)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Options:
1.fault(1) -indicates the state of the trace port is fault
2.testing(2) -indicates the state of the trace port is testing
3.lock(3) -indicates the state of the trace port is lock
4.idle(4) -indicates the state of the trace port is idle
5.busy(5) -indicates the state of the trace port is busy
6.remoteloop(6) -indicates the state of the trace port is remoteloop
7.localloop(7) -indicates the state of the trace port is localloop
8.deactive(8) -indicates the state of the trace port is deactive
9.active(9) -indicates the state of the trace port is active
"
::= { hwPortStateTraceTrapVbOids 5 }
hwV5PortStateTraceTrap NOTIFICATION-TYPE
OBJECTS { hwPortStateTraceFrame, hwPortStateTracePortNumber, hwPortStateTraceSlotId, hwPortStateTracePortId, hwPortStateTracePortState }
STATUS current
DESCRIPTION
"
For the V5 user port:
Port state report trap: 1: frameid; 2: portnum; 3: slotid; 4: portid; 5: portstate.
Port state: 1: failed; 2: test; 3: lock; 4: idle; 5: busy; 6: remote loop;
7: local loop; 8: BRA deactive; 9: BRA active.
"
::= { hwPortStateTraceTraps 2 }
hwAGPortStateTraceTrap NOTIFICATION-TYPE
OBJECTS { hwPortStateTraceFrame, hwPortStateTracePortNumber, hwPortStateTraceSlotId, hwPortStateTracePortId, hwPortStateTracePortState }
STATUS current
DESCRIPTION
"
For the AG user port:
Port state report trap: 1: frameid; 2: portnum; 3: slotid; 4: portid; 5: portstate.
Portstate: 1: failed; 2: test; 3: lock; 4: idle; 5: busy; 6: remote loop;
7: local loop; 8: BRA deactive; 9: BRA active; 10: powerdeny.
"
::= { hwPortStateTraceTraps 3 }
-- majun add for hwc port start 060208
-- HWC PORT MIB ADD BY XUDONGJIAN 200509 START
hwHwcPort OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 13 }
hwHwcPortPhyTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwHwcPortPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this table is hwHwcPortPhysicalIndex."
::= { hwHwcPort 1 }
hwHwcPortPhyEntry OBJECT-TYPE
SYNTAX HwHwcPortPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this entry is hwHwcPortPhysicalIndex."
INDEX { hwHwcPortPhysicalIndex}
::= { hwHwcPortPhyTable 1 }
HwHwcPortPhyEntry ::=
SEQUENCE {
hwHwcPortPhysicalIndex
Integer32,
hwHwcPortMasterSlaveState
INTEGER,
hwHwcPortPhysicalState
INTEGER,
hwHwcSwitchOperate
INTEGER
}
hwHwcPortPhysicalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwHwcPortPhyEntry 1 }
hwHwcPortMasterSlaveState OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
slave(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Options:
1.master(1) -indicates the smaster port state
2.slave(2) -indicates the slave port state
"
::= { hwHwcPortPhyEntry 2 }
hwHwcPortPhysicalState OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
fault(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Options:
1.normal(1) -indicates the physical state of the port is normal
2.fault(2) -indicates the physical state of the port is fault
"
::= { hwHwcPortPhyEntry 3 }
hwHwcSwitchOperate OBJECT-TYPE
SYNTAX INTEGER
{
switch(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Options:
1.switch(1) -indicates the switch
"
::= { hwHwcPortPhyEntry 4 }
-- majun add for hwc port end 060208
-- HWC PORT MIB ADD BY XUDONGJIAN 200509 END
END
View Git Blame Copy Permalink