-- ============================================================================ -- Copyright (C) 2010 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: This is the MIB module for Huawei musa MD5500 private objects -- for service information. -- Reference: -- Version: V1.14 -- ============================================================================ -- -- Document description: HWMD5500PortAdmin module, MD5500 V100R001, Huawei -- Prepared by: Zeng Guibiao 24853 -- Created on: 2000/12/13 -- Modified on: 2000/12/20 -- Modified by: Zeng Guibiao 24853 -- -- HWMUSA-UP-MIB DEFINITIONS ::= BEGIN IMPORTS hwProducts FROM HUAWEI-MIB OBJECT-TYPE, MODULE-IDENTITY,Integer32,NOTIFICATION-TYPE FROM SNMPv2-SMI RowStatus, TruthValue FROM SNMPv2-TC; hwMD5500PortAdminMIB MODULE-IDENTITY LAST-UPDATED "201011172040Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "This is the MIB module for Huawei musa MD5500 private objects for service information." -- Revision history REVISION "201011172040Z" DESCRIPTION "V1.14, change in this revision: -Modified the description" REVISION "201007270000Z" DESCRIPTION "V1.13, change in this revision: -Description change" REVISION "201003240000Z" DESCRIPTION "V1.12, change in this revision: -Corrected the SYNTAX." ::= { hwMd5500Mib 4 } musa OBJECT IDENTIFIER ::= { hwProducts 6 } hwMd5500Mib OBJECT IDENTIFIER ::= { musa 4 } -- PSTN port MIB hwMD5500PSTNPort OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 6 } hwMD5500PSTNPortPhyTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMD5500PSTNPortPhyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The indexes of this table are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, and hwMD5500PSTNPortIndex. " ::= { hwMD5500PSTNPort 1 } hwMD5500PSTNPortPhyEntry OBJECT-TYPE SYNTAX HwMD5500PSTNPortPhyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The indexes of this entry are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, and hwMD5500PSTNPortIndex. " INDEX { hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, hwMD5500PSTNPortIndex } ::= { hwMD5500PSTNPortPhyTable 1 } HwMD5500PSTNPortPhyEntry ::= SEQUENCE { hwMD5500PSTNPortFrameIndex Integer32, hwMD5500PSTNPortSlotIndex Integer32, hwMD5500PSTNPortIndex Integer32, v5ID Integer32, l3Addr Integer32, v51Ts Integer32, telNo OCTET STRING, serviceType INTEGER, pSTNState INTEGER, fSMState INTEGER, portState INTEGER, operate INTEGER, hwPSTNPortMaintainStatus INTEGER, rowStatus RowStatus } hwMD5500PSTNPortFrameIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwMD5500PSTNPortPhyEntry 1 } hwMD5500PSTNPortSlotIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwMD5500PSTNPortPhyEntry 2 } hwMD5500PSTNPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwMD5500PSTNPortPhyEntry 3 } v5ID OBJECT-TYPE SYNTAX Integer32 (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwMD5500PSTNPortPhyEntry 4 } l3Addr OBJECT-TYPE SYNTAX Integer32 (0..32767) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwMD5500PSTNPortPhyEntry 5 } v51Ts OBJECT-TYPE SYNTAX Integer32 (1..15 | 17..31) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwMD5500PSTNPortPhyEntry 6 } telNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwMD5500PSTNPortPhyEntry 7 } serviceType OBJECT-TYPE SYNTAX INTEGER { currenser(1), insidespc(2), v5spc(3), v5preconn(4), hireline(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.currenser(1) -indicates the type is currenser 2.insidespc(2) -indicates the type is insidespc 3.v5spc(3) -indicates the type is v5spc 4.v5preconn(4) -indicates the type is v5preconn 5.hireline(5) -indicates the type is hireline " ::= { hwMD5500PSTNPortPhyEntry 8 } pSTNState OBJECT-TYPE SYNTAX INTEGER { ano(1), an1(2), an2(3), an3(4), an4(5), an5(6), an6(7), an7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.ano(1) -indicates the state is ano 2.an1(2) -indicates the state is an1 3.an2(3) -indicates the state is an2 4.an3(4) -indicates the state is an3 5.an4(5) -indicates the state is an4 6.an5(6) -indicates the state is an5 7.an6(7) -indicates the state is an6 8.an7(8) -indicates the state is an7 " ::= { hwMD5500PSTNPortPhyEntry 9 } fSMState OBJECT-TYPE SYNTAX INTEGER { an10(1), an11(2), an12(3), an20(4), an21(5), an22(6), an31(7), an32(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.an10(1) -indicates the state is an10 2.an11(2) -indicates the state is an11 3.an12(3) -indicates the state is an12 4.an20(4) -indicates the state is an20 5.an21(5) -indicates the state is an21 6.an22(6) -indicates the state is an22 7.an31(7) -indicates the state is an31 8.an32(8) -indicates the state is an32 " ::= { hwMD5500PSTNPortPhyEntry 10 } portState OBJECT-TYPE SYNTAX INTEGER { idle(1), fault(2), test(3), maintain(4), localblock(5), oppblock(6), lock(7), busy(8), viruser(9), farloop(10), nearloop(11), b1codetest(12), b2codetest(13) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.idle(1) -indicates the port state is idle 2.fault(2) -indicates the port state is fault 3.test(3) -indicates the port state is test 4.maintain(4) -indicates the port state is maintain 5.localblock(5) -indicates the port state is localblock 6.oppblock(6) -indicates the port state is oppblock 7.lock(7) -indicates the port state is lock 8.busy(8) -indicates the port state is busy 9.viruser(9) -indicates the port state is viruser 10.farloop(10) -indicates the port state is farloop 11.nearloop(11) -indicates the port state is nearloop 12.b1codetest(12) -indicates the port state is b1codetest 13.b2codetest(13) -indicates the port state is b2codetest " ::= { hwMD5500PSTNPortPhyEntry 11 } operate OBJECT-TYPE SYNTAX INTEGER { block(1), delayblock(2), unblock(3), reset(4), nearloop(5), unloop(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.block(1) -indicates the operation is block 2.delayblock(2) -indicates the operation is delayblock 3.unblock(3) -indicates the operation is unblock 4.reset(4) -indicates the operation is reset 5.nearloop(5) -indicates the operation is nearloop 6.unloop(6) -indicates the operation is unloop " ::= { hwMD5500PSTNPortPhyEntry 12 } hwPSTNPortMaintainStatus OBJECT-TYPE SYNTAX INTEGER { mgcfged(1), v5cfged(2), notcfged(3), spcmcfged(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1. mgcfged(1) -indicates the maintainstatus of the PSTN port is mgcfged 2. v5cfged(2) -indicates the maintainstatus of the PSTN port is v5cfged 3. notcfged(3) -indicates the maintainstatus of the PSTN port is notcfged 4. spcmcfged(4) -indicates the maintainstatus of the PSTN port is spcmcfged " ::= { hwMD5500PSTNPortPhyEntry 13 } rowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the row status." ::= { hwMD5500PSTNPortPhyEntry 14 } hwPstnV5PortDataTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPstnV5PortDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this table are hwMD5500PSTNPortV5IDIndex and hwMD5500PSTNPortL3AddrIndex." ::= { hwMD5500PSTNPort 2 } hwPstnV5PortDataEntry OBJECT-TYPE SYNTAX HwPstnV5PortDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this entry are hwMD5500PSTNPortV5IDIndex and hwMD5500PSTNPortL3AddrIndex." INDEX { hwMD5500PSTNPortV5IDIndex, hwMD5500PSTNPortL3AddrIndex } ::= { hwPstnV5PortDataTable 1 } HwPstnV5PortDataEntry ::= SEQUENCE { hwMD5500PSTNPortV5IDIndex Integer32, hwMD5500PSTNPortL3AddrIndex Integer32, hwMD5500PSTNPortFrame Integer32, hwMD5500PSTNPortSlot Integer32, hwMD5500PSTNPortNumber Integer32, hwMD5500PSTNPortv51Ts Integer32, hwMD5500PSTNPorttelNo OCTET STRING, hwMD5500PSTNPortserviceType INTEGER, hwMD5500PSTNPortpSTNState INTEGER, hwMD5500PSTNPortfSMState INTEGER, hwMD5500PSTNPortportState INTEGER, hwMD5500PSTNPortoperate INTEGER } hwMD5500PSTNPortV5IDIndex OBJECT-TYPE SYNTAX Integer32 (0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwPstnV5PortDataEntry 1 } hwMD5500PSTNPortL3AddrIndex OBJECT-TYPE SYNTAX Integer32 (0..32767) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwPstnV5PortDataEntry 2 } hwMD5500PSTNPortFrame OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwPstnV5PortDataEntry 3 } hwMD5500PSTNPortSlot OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwPstnV5PortDataEntry 4 } hwMD5500PSTNPortNumber OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwPstnV5PortDataEntry 5 } hwMD5500PSTNPortv51Ts OBJECT-TYPE SYNTAX Integer32 (1..15 | 17..31) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwPstnV5PortDataEntry 6 } hwMD5500PSTNPorttelNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwPstnV5PortDataEntry 7 } hwMD5500PSTNPortserviceType OBJECT-TYPE SYNTAX INTEGER { currenser(1), insidespc(2), v5spc(3), v5preconn(4), hireline(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.currenser(1) -indicates the type is currenser 2.insidespc(2) -indicates the type is insidespc 3.v5spc(3) -indicates the type is v5spc 4.v5preconn(4) -indicates the type is v5preconn 5.hireline(5) -indicates the type is hireline " ::= { hwPstnV5PortDataEntry 8 } hwMD5500PSTNPortpSTNState OBJECT-TYPE SYNTAX INTEGER { an0(1), an1(2), an2(3), an3(4), an4(5), an5(6), an6(7), an7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.an0(1) -indicates the state is ano 2.an1(2) -indicates the state is an1 3.an2(3) -indicates the state is an2 4.an3(4) -indicates the state is an3 5.an4(5) -indicates the state is an4 6.an5(6) -indicates the state is an5 7.an6(7) -indicates the state is an6 8.an7(8) -indicates the state is an7 " ::= { hwPstnV5PortDataEntry 9 } hwMD5500PSTNPortfSMState OBJECT-TYPE SYNTAX INTEGER { an10(1), an11(2), an12(3), an20(4), an21(5), an22(6), an31(7), an32(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.an10(1) -indicates the state is an10 2.an11(2) -indicates the state is an11 3.an12(3) -indicates the state is an12 4.an20(4) -indicates the state is an20 5.an21(5) -indicates the state is an21 6.an22(6) -indicates the state is an22 7.an31(7) -indicates the state is an31 8.an32(8) -indicates the state is an32 " ::= { hwPstnV5PortDataEntry 10 } hwMD5500PSTNPortportState OBJECT-TYPE SYNTAX INTEGER { idle(1), fault(2), test(3), maintain(4), localblock(5), oppblock(6), lock(7), busy(8), viruser(9), farloop(10), nearloop(11), b1codetest(12), b2codetest(13) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.idle(1) -indicates the port state is idle 2.fault(2) -indicates the port state is fault 3.test(3) -indicates the port state is test 4.maintain(4) -indicates the port state is maintain 5.localblock(5) -indicates the port state is localblock 6.oppblock(6) -indicates the port state is oppblock 7.lock(7) -indicates the port state is lock 8.busy(8) -indicates the port state is busy 9.viruser(9) -indicates the port state is viruser 10.farloop(10) -indicates the port state is farloop 11.nearloop(11) -indicates the port state is nearloop 12.b1codetest(12) -indicates the port state is b1codetest 13.b2codetest(13) -indicates the port state is b2codetest " ::= { hwPstnV5PortDataEntry 11 } hwMD5500PSTNPortoperate OBJECT-TYPE SYNTAX INTEGER { block(1), delayblock(2), unblock(3), reset(4), nearloop(5), unloop(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.block(1) -indicates the operation is block 2.delayblock(2) -indicates the operation is delayblock 3.unblock(3) -indicates the operation is unblock 4.reset(4) -indicates the operation is reset 5.nearloop(5) -indicates the operation is nearloop 6.unloop(6) -indicates the operation is unloop " ::= { hwPstnV5PortDataEntry 12 } hwPstnPortAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPstnPortAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this table are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, and hwMD5500PSTNPortIndex." ::= { hwMD5500PSTNPort 3 } hwPstnPortAttrEntry OBJECT-TYPE SYNTAX HwPstnPortAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this entry are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, and hwMD5500PSTNPortIndex." INDEX { hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, hwMD5500PSTNPortIndex } ::= { hwPstnPortAttrTable 1 } HwPstnPortAttrEntry ::= SEQUENCE { hwMD5500PSTNPortVoiceGain INTEGER, hwMD5500PSTNPortAttribute0 INTEGER, hwMD5500PSTNPortAttribute1 INTEGER, hwMD5500PSTNPortRowStatus RowStatus, hwMD5500PSTNPortReversePoleLevel Integer32, hwMD5500PSTNPortLReversePoleEnable INTEGER, hwMD5500PSTNPortUserType INTEGER, hwMD5500PSTNPortImpedance Integer32, hwMD5500PSTNPortCurrent Integer32, hwMD5500PSTNPortDCTime Integer32, --The configuration interface is not provided currently, which may be added in the future. Therefore, the code is retained. --hwMD5500PSTNPortPITime --INTEGER, hwMD5500PSTNPortFSKDelayInterval Integer32, hwMD5500PSTNPortActualGain Integer32, hwMD5500PSTNPortCidTransWhen INTEGER, hwMD5500PSTNPortCidFormat INTEGER, --P300-YY-Start by Wang Baoxing 2006-8-18 hwMD5500PSTNPortCidReversePole INTEGER, --P300-YY-Start by Wang Baoxing 2006-8-18 hwMD5500PSTNPortAGCEnableMarker INTEGER, hwMD5500PSTNPortAGCEnableLevel Integer32, hwMD5500PSTNPortSNSEnableMarker INTEGER, hwMD5500PSTNPortSNSEnableLevel Integer32, hwMD5500PSTNPortDspInputGain Integer32, hwMD5500PSTNPortDspOutputGain Integer32, hwMD5500PSTNPortlinelock INTEGER } hwMD5500PSTNPortVoiceGain OBJECT-TYPE SYNTAX INTEGER { high(1), low(2), range1(3), range2(4), range3(5), range4(6), range5(7), range6(8), range7(9), range8(10), range9(11), range10(12), range11(13), range12(14), range13(15), range14(16), range15(17), range16(18), range17(19), range18(20), range19(21), range20(22), range21(23), range22(24), range23(25), range24(26), range25(27), range26(28), range27(29), range28(30), range29(31), range29(32), agc(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.high(1) -indicates the VoiceGain of the PSTN port is high 2.low(2) -indicates the VoiceGain of the PSTN port is low 3.range1(3) -indicates the VoiceGain of the PSTN port is range1 4.range2(4) -indicates the VoiceGain of the PSTN port is range2 5.range3(5) -indicates the VoiceGain of the PSTN port is range3 6.range4(6) -indicates the VoiceGain of the PSTN port is range4 7.range5(7) -indicates the VoiceGain of the PSTN port is range5 8.range6(8) -indicates the VoiceGain of the PSTN port is range6 9.range7(9) -indicates the VoiceGain of the PSTN port is range7 10.range8(10) -indicates the VoiceGain of the PSTN port is range8 11.range9(11) -indicates the VoiceGain of the PSTN port is range9 12.range10(12) -indicates the VoiceGain of the PSTN port is range10 13.range11(13) -indicates the VoiceGain of the PSTN port is range11 14.range12(14) -indicates the VoiceGain of the PSTN port is range12 15.range13(15) -indicates the VoiceGain of the PSTN port is range13 16.range14(16) -indicates the VoiceGain of the PSTN port is range14 17.range15(17) -indicates the VoiceGain of the PSTN port is range15 18.range16(18) -indicates the VoiceGain of the PSTN port is range16 19.range17(19) -indicates the VoiceGain of the PSTN port is range17 20.range18(20) -indicates the VoiceGain of the PSTN port is range18 21.range19(21) -indicates the VoiceGain of the PSTN port is range19 22.range20(22) -indicates the VoiceGain of the PSTN port is range20 23.range21(23) -indicates the VoiceGain of the PSTN port is range21 24.range22(24) -indicates the VoiceGain of the PSTN port is range22 25.range23(25) -indicates the VoiceGain of the PSTN port is range23 26.range24(26) -indicates the VoiceGain of the PSTN port is range24 27.range25(27) -indicates the VoiceGain of the PSTN port is range25 28.range26(28) -indicates the VoiceGain of the PSTN port is range26 29.range27(29) -indicates the VoiceGain of the PSTN port is range27 30.range28(30) -indicates the VoiceGain of the PSTN port is range28 31.range29(31) -indicates the VoiceGain of the PSTN port is range29 32.range29(32) -indicates the VoiceGain of the PSTN port is range30 33.agc(255) -indicates the VoiceGain of the PSTN port is agc " DEFVAL { 1 } ::= { hwPstnPortAttrEntry 1 } hwMD5500PSTNPortAttribute0 OBJECT-TYPE SYNTAX INTEGER { nolimt(1), limt(2), mode-DTMF-pulse-dial(3), mode-DTMF-dial-only(4), mode-pulse-dial-only(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.nolimt(1) -indicates the attribute of the PSTN port is nolimt 2.limt(2) -indicates the attribute of the PSTN port is limt 3.mode-DTMF-pulse-dial(3) -indicates the dial mode are both pulse and DTMF 4.mode-DTMF-dial-only(4) -indicates the dial mode is only DTMF 5.mode-pulse-dial-only(5) -indicates the dial mode is only pulse " ::= { hwPstnPortAttrEntry 2 } hwMD5500PSTNPortAttribute1 OBJECT-TYPE SYNTAX INTEGER { notsupport(1), support(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.notsupport(1) -indicates the attribute of the PSTN port is not supported 2.support(2) -indicates the attribute of the PSTN port is supported " ::= { hwPstnPortAttrEntry 3 } hwMD5500PSTNPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " indicates the row status." ::= { hwPstnPortAttrEntry 4 } hwMD5500PSTNPortReversePoleLevel OBJECT-TYPE SYNTAX Integer32 (20..2560) MAX-ACCESS read-write STATUS current DESCRIPTION " indicates the reverse pole level of the PSTN port of md5500" ::= { hwPstnPortAttrEntry 5 } hwMD5500PSTNPortLReversePoleEnable OBJECT-TYPE SYNTAX INTEGER { reversePoleDisable(1), reversePoleEnable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.reversePoleDisable(1) -indicates the reverse pole level of the port is disable 2.reversePoleEnable(2) -indicates the reverse pole level of the port is enbale " ::= { hwPstnPortAttrEntry 6 } hwMD5500PSTNPortUserType OBJECT-TYPE SYNTAX INTEGER { del(1), lcpbx(2), ecpbx(3), payphone(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.del(1) -indicates the del user 2.lcpbx(2) -indicates the loop calling PBX 3.ecpbx(3) -indicates the earth calling PBX 4.payphone(4) -indicates the payphone" DEFVAL { 1 } ::= { hwPstnPortAttrEntry 7 } hwMD5500PSTNPortImpedance OBJECT-TYPE --P300-YY-Start by Wang Baoxing 2006-8-18 SYNTAX Integer32 (1..15 ) --P300-YY-End by Wang Baoxing 2006-8-18 MAX-ACCESS read-write STATUS current DESCRIPTION " Port impedance of the port. The following values indicate different impedances in different application circumstances. 1 -- Bureau machine in China (200+680|| 100nf) 2 -- User machine in China (200+560|| 100nf) 3 -- 600 ohm interface 4 -- Interface of Russia (150+510|| 47nf) 5 -- (220+820|| 115nf ) 6 -- (220+820|| 120nf ) 7 -- 900 ohm interface 8 -- Interface of Brazil (800|| 50nf) 9 -- BT0 (Zin=87+1052||228nF+229||28.4nF, Zload=93+615||471nF+179||495nF+244||32nF) 10 -- HK_BT3 (Zin=370+620|| 310nf,Zload=600) 11 -- HK_BT5 (Zin=270+264|| 357nf+1434|| 265nf,Zload=600) 12 -- BT1 (BT0 without AGC) 13 -- BT2 (Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(270 +264 //357nF+1434 //265nF)) 14 -- BT3 (Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(164 +162 //363nF+1227 //350nF)) --P300-YY-Start by Wang Baoxing 2006-8-18 15 -- KPN (Zin= 270+750|| 150nf) --P300-YY-End by Wang Baoxing 2006-8-18 The impedance values of the ports on the board are as follows. Different values correspond to the requirements for the impedance in different application scenarios. 1 -- Bureau device in China (200+680 || 100 nf) 2 -- China subscriber device (200+560 || 100 nf) 3 -- 600 ohm interface 4 -- Interface in Russia (150+510 || 47 nf) 5 -- (220+820 || 115 nf) 6 -- (220+820 || 120 nf) 7 -- 900 ohm interface 8 -- Interface in Brazil (800 || 50 nf) 9 -- BT0 (Zin=87+1052||228nF+229||28.4nF, Zload=93+615||471nF+179||495nF+244||32nF) 10 -- HK_BT3 (Zin=370+620|| 310nf,Zload=600) 11 -- HK_BT5 (Zin=270+264|| 357nf+1434|| 265nf,Zload=600) 12 -- BT1 (BT0 without AGC) 13 -- BT2 (Zin=(87+1052 //228nF+229 //28.4nF),Zload=(270+264 //357nF+1434 //265nF)) 14 -- BT3 (Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(164 +162 //363nF+1227 //350nF)) --P300-YY-Start by Wang Baoxing 2006-8-18 15 -- KPN(Zin= 270+750|| 150nf) --P300-YY-End by Wang Baoxing 2006-8-18 " DEFVAL { 3 } ::= { hwPstnPortAttrEntry 8 } hwMD5500PSTNPortCurrent OBJECT-TYPE SYNTAX Integer32 (1..19) MAX-ACCESS read-write STATUS current DESCRIPTION " Port current supported by the board. The value ranges from 1 to 17, which indicates the port current value supported under certain loopline impedance. 1 -- 25mA steady current 2 -- 16mA steady current 3 -- 32mA steady current 4 -- 40mA steady current 5 -- 35mA 2*200 ohm 6 -- 35mA 2*250 ohm 7 -- 35mA 2*400 ohm 8 -- 47mA 2*200 ohm 9 -- 47mA 2*250 ohm 10 -- 47mA 2*400 ohm 11 -- 20mA 2*200 ohm 12 -- 20mA 2*250 ohm 13 -- 20mA 2*400 ohm 14 -- 30mA 2*200 ohm 15 -- 30mA 2*250 ohm 16 -- 30mA 2*400 ohm 17 -- 40mA 2*200 ohm 18 -- 40mA 2*250 ohm 19 -- 40mA 2*400 ohm The current values of the ports on the board are as follows. The following values indicate the current values for different loop resistances of loop lines (for example 2*400 ?). 1 -- 25mA constant current 2 -- 16mA constant current 3 -- 32mA constant current 4 -- 40mA constant current 5 -- 35mA 2*200 ohm 6 -- 35mA 2*250 ohm 7 -- 35mA 2*400 ohm 8 -- 47mA 2*200 ohm 9 -- 47mA 2*250 ohm 10 -- 47mA 2*400 ohm 11 -- 20mA 2*200 ohm 12 -- 20mA 2*250 ohm 13 -- 20mA 2*400 ohm 14 -- 30mA 2*200 ohm 15 -- 30mA 2*250 ohm 16 -- 30mA 2*400 ohm 17 -- 40mA 2*200 ohm 18 -- 40mA 2*250 ohm 19 -- 40mA 2*400 ohm " DEFVAL { 1 } ::= { hwPstnPortAttrEntry 9 } hwMD5500PSTNPortDCTime OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Disconnect clear time (*10 ms)." DEFVAL { 10 } ::= { hwPstnPortAttrEntry 10 } -- The configuration interface is not provided currently, which may be added in the future. Therefore, the code is retained. -- hwMD5500PSTNPortPITime OBJECT-TYPE -- SYNTAX Integer32 (0..20) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Proceed indication time (*10 ms)." -- DEFVAL { 16 } -- ::= { hwPstnPortAttrEntry 11 } hwMD5500PSTNPortFSKDelayInterval OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Time length of the delay for transmitting the FSK calling number (unit: 10 ms)." DEFVAL { 80 } ::= { hwPstnPortAttrEntry 12 } hwMD5500PSTNPortActualGain OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Port actual gain." ::= { hwPstnPortAttrEntry 13 } hwMD5500PSTNPortCidTransWhen OBJECT-TYPE SYNTAX INTEGER { after-ring(1), before-ring(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.after-ring(1) -After ringing 2.before-ring(2) -Before ringing " DEFVAL { 1 } ::= { hwPstnPortAttrEntry 14 } hwMD5500PSTNPortCidFormat OBJECT-TYPE SYNTAX INTEGER { sdmf-fsk(1), mdmf-fsk(2), dtmf(3), r15(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.sdmf-fsk(1) -sdmf (FSK simple data message format) 2.mdmf-fsk(2) -mdmf (FSK multi-data message format) 3.dtmf(3) -dtmf (DTMF format) 4.r15(4) -R1.5 " DEFVAL { 1 } ::= { hwPstnPortAttrEntry 15 } --P300-YY-Start by Wang Baoxing 2006-8-18 hwMD5500PSTNPortCidReversePole OBJECT-TYPE SYNTAX INTEGER { notsend(1), send(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The polarity reversal is sent before the calling number is transmitted. Options: 1.notsend(1)-not send 2.send(2)-send " DEFVAL { 1 } ::= { hwPstnPortAttrEntry 16 } --P300-YY-End by Wang Baoxing 2006-8-18 hwMD5500PSTNPortAGCEnableMarker OBJECT-TYPE SYNTAX INTEGER { agcDisable(1), agcEnable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.agcDisable(1) -Disable the auto gain control 2.agcEnable(2) -Enable the auto gain control " ::= { hwPstnPortAttrEntry 17 } hwMD5500PSTNPortAGCEnableLevel OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Automatic gain control parameter setting. 0-15 maps -9 dbm0 to -24 dbm0. The default value is 13. " ::= { hwPstnPortAttrEntry 18 } hwMD5500PSTNPortSNSEnableMarker OBJECT-TYPE SYNTAX INTEGER { snsDisable(1), snsEnable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.snsDisable(1) -Disable 2.snsEnable(2) -Enable " ::= { hwPstnPortAttrEntry 19 } hwMD5500PSTNPortSNSEnableLevel OBJECT-TYPE SYNTAX Integer32 (6..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Spectral noise suppression parameter setting (6 db-20 db). The default value is 12 db. " ::= { hwPstnPortAttrEntry 20 } hwMD5500PSTNPortDspInputGain OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "DSP input gain of PSTN port parameter setting (PCM->IP, 1-16 correspond to -10 db to +5 db). The default value is 11. " ::= { hwPstnPortAttrEntry 21 } hwMD5500PSTNPortDspOutputGain OBJECT-TYPE SYNTAX Integer32 (1..21) MAX-ACCESS read-write STATUS current DESCRIPTION "DSP output gain of PSTN port parameter setting (IP->PCM, 1-21 correspond to -10 db to +10 db). The default value is 11. " ::= { hwPstnPortAttrEntry 22 } hwMD5500PSTNPortlinelock OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether the port can be locked or not. 1. cannot be locked; 2. can be locked. Options: 1.disable(1) -disable 2.enable(2) -enable " DEFVAL { {enable(2)} } ::= { hwPstnPortAttrEntry 23 } hwPstn16KCAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPstn16KCAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this table are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, and hwMD5500PSTNPortIndex." ::= { hwMD5500PSTNPort 5 } hwPstn16KCAttrEntry OBJECT-TYPE SYNTAX HwPstn16KCAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this entry are hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, and hwMD5500PSTNPortIndex." INDEX { hwMD5500PSTNPortFrameIndex, hwMD5500PSTNPortSlotIndex, hwMD5500PSTNPortIndex } ::= { hwPstn16KCAttrTable 1 } HwPstn16KCAttrEntry ::= SEQUENCE { hwMD5500PSTNPortHighLevel Integer32, hwMD5500PSTNPortLowLevel Integer32, hwMD5500PSTNPortKCType INTEGER, hwMD5500PSTNPortVoltage INTEGER, hwMD5500PSTNPortKCRowStatus RowStatus } hwMD5500PSTNPortHighLevel OBJECT-TYPE SYNTAX Integer32 (20..500) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwPstn16KCAttrEntry 1 } hwMD5500PSTNPortLowLevel OBJECT-TYPE SYNTAX Integer32 (20..500) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwPstn16KCAttrEntry 2 } hwMD5500PSTNPortKCType OBJECT-TYPE SYNTAX INTEGER { port1216kcselector16kc(1), port1216kcselector12kc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.port1216kcselector16kc(1) -indicates the Kc type is 16kc 2.port1216kcselector12kc(2) -indicates the Kc type is 12kc " ::= { hwPstn16KCAttrEntry 3 } hwMD5500PSTNPortVoltage OBJECT-TYPE SYNTAX INTEGER { port1216kcvalidvoltage0(1), port1216kcvalidvoltage1(2), port1216kcvalidvoltage2(3), port1216kcvalidvoltage3(4), port1216kcvalidvoltage4(5), port1216kcvalidvoltage5(6), port1216kcvalidvoltage6(7), port1216kcvalidvoltage7(8), port1216kcvalidvoltage8(9), port1216kcvalidvoltage9(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.port1216kcvalidvoltage0(1) -indicates the validvoltage value 2.port1216kcvalidvoltage1(2) -indicates the validvoltage value 3.port1216kcvalidvoltage2(3) -indicates the validvoltage value 4.port1216kcvalidvoltage3(4) -indicates the validvoltage value 5.port1216kcvalidvoltage4(5) -indicates the validvoltage value 6.port1216kcvalidvoltage5(6) -indicates the validvoltage value 7.port1216kcvalidvoltage6(7) -indicates the validvoltage value 8.port1216kcvalidvoltage7(8) -indicates the validvoltage value 9.port1216kcvalidvoltage8(9) -indicates the validvoltage value 10.port1216kcvalidvoltage9(10) -indicates the validvoltage value " ::= { hwPstn16KCAttrEntry 4 } hwMD5500PSTNPortKCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " indicates the the row status." ::= { hwPstn16KCAttrEntry 5 } -- Description of virtual user on the V5 port hwV5VirPortDesTable OBJECT-TYPE SYNTAX SEQUENCE OF HwV5VirPortDesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this table are hwMD5500VirtualuserLEID, hwMD5500VirtualuserAdrrType, and hwMD5500VirtualAddress." ::= { hwMD5500PSTNPort 6 } hwV5VirPortDesEntry OBJECT-TYPE SYNTAX HwV5VirPortDesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this entry are hwMD5500VirtualuserLEID, hwMD5500VirtualuserAdrrType, and hwMD5500VirtualAddress." INDEX { hwMD5500VirtualuserLEID, hwMD5500VirtualuserAdrrType, hwMD5500VirtualAddress } ::= { hwV5VirPortDesTable 1 } HwV5VirPortDesEntry ::= SEQUENCE { hwMD5500VirtualuserLEID Integer32, hwMD5500VirtualuserAdrrType INTEGER, hwMD5500VirtualAddress Integer32, hwMD5500VirtualPortType INTEGER, hwMD5500VirtualPortGroup Integer32, hwMD5500VirtualRowStatus RowStatus } hwMD5500VirtualuserLEID OBJECT-TYPE SYNTAX Integer32 (0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " LEV5 interface ID " ::= { hwV5VirPortDesEntry 1 } hwMD5500VirtualuserAdrrType OBJECT-TYPE SYNTAX INTEGER { l3address(1), efaddress(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Options: 1.l3address(1) -indicates the addr type is l3 2.efaddress(2) -indicates the addr type is efa " ::= { hwV5VirPortDesEntry 2 } hwMD5500VirtualAddress OBJECT-TYPE SYNTAX Integer32 (0..32767) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Address " ::= { hwV5VirPortDesEntry 3 } hwMD5500VirtualPortType OBJECT-TYPE SYNTAX INTEGER { pstnPort(1), braPort(2), praPort(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.pstnPort(1) -indicates the port type is pstnPort 2.braPort(2) -indicates the port type is braPort 3.praPort(3) -indicates the port type is praPort " ::= { hwV5VirPortDesEntry 4 } hwMD5500VirtualPortGroup OBJECT-TYPE SYNTAX Integer32 (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION " Port group number." ::= { hwV5VirPortDesEntry 5 } hwMD5500VirtualRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Row status." ::= { hwV5VirPortDesEntry 6 } -- System parameter configuration table hwSysParaConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSysParaConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "System parameter configuration table. The index of this table is hwSysParaConfigSerialNum." ::= { hwMD5500PSTNPort 7 } hwSysParaConfigEntry OBJECT-TYPE SYNTAX HwSysParaConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "System parameter configuration table. The index of this entry is hwSysParaConfigSerialNum." INDEX { hwSysParaConfigSerialNum } ::= { hwSysParaConfigTable 1 } HwSysParaConfigEntry ::= SEQUENCE { hwSysParaConfigSerialNum Integer32, hwSysParaValue Integer32 } hwSysParaConfigSerialNum OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " System parameter ID" ::= { hwSysParaConfigEntry 1 } hwSysParaValue OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " System parameter value." ::= { hwSysParaConfigEntry 2 } -- Overseas parameter configuration table hwOverSeaConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOverSeaConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Find and configure the oversea parameters according to the hwOverSeaConfigSerialNum. The index of this table is hwOverSeaConfigSerialNum." ::= { hwMD5500PSTNPort 8 } hwOverSeaConfigEntry OBJECT-TYPE SYNTAX HwOverSeaConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Find and configure the oversea parameters according to the hwOverSeaConfigSerialNum. The index of this entry is hwOverSeaConfigSerialNum." INDEX { hwOverSeaConfigSerialNum } ::= { hwOverSeaConfigTable 1 } HwOverSeaConfigEntry ::= SEQUENCE { hwOverSeaConfigSerialNum Integer32, hwOverSeaValue Integer32 } hwOverSeaConfigSerialNum OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Overseas parameter ID." ::= { hwOverSeaConfigEntry 1 } hwOverSeaValue OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Oversea parameter value." ::= { hwOverSeaConfigEntry 2 } hwPortGlobalAttrTable OBJECT IDENTIFIER ::= { hwMD5500PSTNPort 9} hwPortGlobalAttrTANSON OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION " Sets the eliminating jitter time during the PSTN port on-hook signaling state. 1 -- 50ms 2 -- 100ms 3 -- 150ms 4 -- 200ms " ::= { hwPortGlobalAttrTable 1 } hwPortGlobalAttrTANSOFF OBJECT-TYPE SYNTAX Integer32 (15..20) MAX-ACCESS read-write STATUS current DESCRIPTION " Sets the eliminating jitter time during the PSTN port off-hook state. 15 -- 150ms 16 -- 160ms 17 -- 170ms 18 -- 180ms 19 -- 190ms 20 -- 200ms " ::= { hwPortGlobalAttrTable 2 } hwMD5500BRAPort OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 7 } -- Data table of the BRA port hwIsdnPhyPortDataTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIsdnPhyPortDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this table are hwMD5500BRAPortFrameIndex, hwMD5500BRAPortSlotIndex, and hwMD5500BRAPortIndex." ::= { hwMD5500BRAPort 1 } hwIsdnPhyPortDataEntry OBJECT-TYPE SYNTAX HwIsdnPhyPortDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this entry are hwMD5500BRAPortFrameIndex, hwMD5500BRAPortSlotIndex, and hwMD5500BRAPortIndex." INDEX { hwMD5500BRAPortFrameIndex, hwMD5500BRAPortSlotIndex, hwMD5500BRAPortIndex } ::= { hwIsdnPhyPortDataTable 1 } HwIsdnPhyPortDataEntry ::= SEQUENCE { hwMD5500BRAPortFrameIndex Integer32, hwMD5500BRAPortSlotIndex Integer32, hwMD5500BRAPortIndex Integer32, hwMD5500BRAPortV5ID Integer32, hwMD5500BRAPortGrpNo Integer32, hwMD5500BRAEfAddr Integer32, hwMD5500BRAV51Ts1 Integer32, hwMD5500BRAV51Ts2 Integer32, hwMD5500BRATelNo OCTET STRING, hwMD5500BRAServiceType INTEGER, hwMD5500BRAFSMState INTEGER, hwMD5500BRAPortState INTEGER, hwMD5500BRAOperate INTEGER, hwMD5500BRAMaintainStatus INTEGER, hwMD5500BRARowStatus RowStatus } hwMD5500BRAPortFrameIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwIsdnPhyPortDataEntry 1 } hwMD5500BRAPortSlotIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwIsdnPhyPortDataEntry 2 } hwMD5500BRAPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwIsdnPhyPortDataEntry 3 } hwMD5500BRAPortV5ID OBJECT-TYPE SYNTAX Integer32 (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwIsdnPhyPortDataEntry 4 } hwMD5500BRAPortGrpNo OBJECT-TYPE SYNTAX Integer32 (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwIsdnPhyPortDataEntry 5 } hwMD5500BRAEfAddr OBJECT-TYPE SYNTAX Integer32 (0..8175) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwIsdnPhyPortDataEntry 6 } hwMD5500BRAV51Ts1 OBJECT-TYPE SYNTAX Integer32 (1..15 | 17..31) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwIsdnPhyPortDataEntry 7 } hwMD5500BRAV51Ts2 OBJECT-TYPE SYNTAX Integer32 (1..15 | 17..31) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwIsdnPhyPortDataEntry 8 } hwMD5500BRATelNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwIsdnPhyPortDataEntry 9 } hwMD5500BRAServiceType OBJECT-TYPE SYNTAX INTEGER { currenser(1), insidespc(2), v5spc(3), v5preconn(4), hireline(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.currenser(1) -indicates the type is currenser 2.insidespc(2) -indicates the type is insidespc 3.v5spc(3) -indicates the type is v5spc 4.v5preconn(4) -indicates the type is v5preconn 5.hireline(5) -indicates the type is hireline " ::= { hwIsdnPhyPortDataEntry 10 } hwMD5500BRAFSMState OBJECT-TYPE SYNTAX INTEGER { an10(1), an11(2), an12(3), an20(4), an21(5), an22(6), an31(7), an32(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.an10(1) -indicates the state is an10 2.an11(2) -indicates the state is an11 3.an12(3) -indicates the state is an12 4.an20(4) -indicates the state is an20 5.an21(5) -indicates the state is an21 6.an22(6) -indicates the state is an22 7.an31(7) -indicates the state is an31 8.an32(8) -indicates the state is an32 " ::= { hwIsdnPhyPortDataEntry 11 } hwMD5500BRAPortState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), fault(3), test(4), maintain(5), localblock(6), oppblock(7), lock(8), busy(9), viruser(10), farloop(11), nearloop(12), b1codetest(13), b2codetest(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.active(1) -indicates the port state is active 2.inactive(2) -indicates the port state is inactive 3.fault(3) -indicates the port state is fault 4.test(4) -indicates the port state is test 5.maintain(5) -indicates the port state is maintain 6.localblock(6) -indicates the port state is localblock 7.oppblock(7) -indicates the port state is oppblock 8.lock(8) -indicates the port state is lock 9.busy(9) -indicates the port state is busy 10.viruser(10) -indicates the port state is viruser 11.farloop(11) -indicates the port state is farloop 12.nearloop(12) -indicates the port state is nearloop 13.b1codetest(13) -indicates the port state is b1codetest 14.b2codetest(14) -indicates the port state is b2codetest " ::= { hwIsdnPhyPortDataEntry 12 } hwMD5500BRAOperate OBJECT-TYPE SYNTAX INTEGER { block(1), delayblock(2), unblock(3), reset(4), nearloop(5), farloop(6), unloop(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.block(1) -indicates the operation is block 2.delayblock(2) -indicates the operation is delayblock 3.unblock(3) -indicates the operation is unblock 4.reset(4) -indicates the operation is reset 5.nearloop(5) -indicates the operation is nearloop 6.farloop(6) -indicates the operation is farloop 7.unloop(7) -indicates the operation is unloop " ::= { hwIsdnPhyPortDataEntry 13 } hwMD5500BRAMaintainStatus OBJECT-TYPE SYNTAX INTEGER { mgcfged(1), v5cfged(2), notcfged(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.mgcfged(1) -indicates the maintainstatus of the PSTN port is mgcfged 2.v5cfged(2) -indicates the maintainstatus of the PSTN port is v5cfged 3.notcfged(3) -indicates the maintainstatus of the PSTN port is notcfged " ::= { hwIsdnPhyPortDataEntry 14 } hwMD5500BRARowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwIsdnPhyPortDataEntry 15 } -- Data table of the port hwIsdnV5PortDataTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIsdnV5PortDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data table of the port. The indexes of this table are hwMD5500BRAPortV5IDIndex and hwMD5500BRAPortEFAddrIndex." ::= { hwMD5500BRAPort 2 } hwIsdnV5PortDataEntry OBJECT-TYPE SYNTAX HwIsdnV5PortDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data table of the port. The indexes of this entry are hwMD5500BRAPortV5IDIndex and hwMD5500BRAPortEFAddrIndex." INDEX { hwMD5500BRAPortV5IDIndex, hwMD5500BRAPortEFAddrIndex } ::= { hwIsdnV5PortDataTable 1 } HwIsdnV5PortDataEntry ::= SEQUENCE { hwMD5500BRAPortV5IDIndex Integer32, hwMD5500BRAPortEFAddrIndex Integer32, hwMD5500BRAPortFrameID Integer32, hwMD5500BRAPortSlotID Integer32, hwMD5500BRAPortID Integer32, hwMD5500BRAPortPortGrpNo Integer32, hwMD5500BRAPortV51Ts1 Integer32, hwMD5500BRAPortV51Ts2 Integer32, hwMD5500BRAPortTelNo OCTET STRING, hwMD5500BRAPortServiceType INTEGER, hwMD5500BRAPortFSMState INTEGER, hwMD5500BRAPortPortState INTEGER, hwMD5500BRAPortOperate INTEGER } hwMD5500BRAPortV5IDIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwIsdnV5PortDataEntry 1 } hwMD5500BRAPortEFAddrIndex OBJECT-TYPE SYNTAX Integer32 (0..8175) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwIsdnV5PortDataEntry 2 } hwMD5500BRAPortFrameID OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwIsdnV5PortDataEntry 3 } hwMD5500BRAPortSlotID OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwIsdnV5PortDataEntry 4 } hwMD5500BRAPortID OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwIsdnV5PortDataEntry 5 } hwMD5500BRAPortPortGrpNo OBJECT-TYPE SYNTAX Integer32 (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwIsdnV5PortDataEntry 6 } hwMD5500BRAPortV51Ts1 OBJECT-TYPE SYNTAX Integer32 (1..15 | 17..31) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwIsdnV5PortDataEntry 7 } hwMD5500BRAPortV51Ts2 OBJECT-TYPE SYNTAX Integer32 (1..15 | 17..31) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwIsdnV5PortDataEntry 8 } hwMD5500BRAPortTelNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { hwIsdnV5PortDataEntry 9 } hwMD5500BRAPortServiceType OBJECT-TYPE SYNTAX INTEGER { currenser(1), insidespc(2), v5spc(3), v5preconn(4), hireline(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.currenser(1) -indicates the type is currenser 2.insidespc(2) -indicates the type is insidespc 3.v5spc(3) -indicates the type is v5spc 4.v5preconn(4) -indicates the type is v5preconn 5.hireline(5) -indicates the type is hireline " ::= { hwIsdnV5PortDataEntry 10 } hwMD5500BRAPortFSMState OBJECT-TYPE SYNTAX INTEGER { an10(1), an11(2), an12(3), an20(4), an21(5), an22(6), an31(7), an32(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.an10(1) -indicates the state is an10 2.an11(2) -indicates the state is an11 3.an12(3) -indicates the state is an12 4.an20(4) -indicates the state is an20 5.an21(5) -indicates the state is an21 6.an22(6) -indicates the state is an22 7.an31(7) -indicates the state is an31 8.an32(8) -indicates the state is an32 " ::= { hwIsdnV5PortDataEntry 11 } hwMD5500BRAPortPortState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), fault(3), test(4), maintain(5), localblock(6), oppblock(7), lock(8), busy(9), viruser(10), farloop(11), nearloop(12), b1codetest(13), b2codetest(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "Options: 1.active(1) -indicates the port state is active 2.inactive(2) -indicates the port state is inactive 3.fault(3) -indicates the port state is fault 4.test(4) -indicates the port state is test 5.maintain(5) -indicates the port state is maintain 6.localblock(6) -indicates the port state is localblock 7.oppblock(7) -indicates the port state is oppblock 8.lock(8) -indicates the port state is lock 9.busy(9) -indicates the port state is busy 10.viruser(10) -indicates the port state is viruser 11.farloop(11) -indicates the port state is farloop 12.nearloop(12) -indicates the port state is nearloop 13.b1codetest(13) -indicates the port state is b1codetest 14.b2codetest(14) -indicates the port state is b2codetest " ::= { hwIsdnV5PortDataEntry 12 } hwMD5500BRAPortOperate OBJECT-TYPE SYNTAX INTEGER { block(1), delayblock(2), unblock(3), reset(4), nearloop(5), farloop(6), unloop(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.block(1) -indicates the operation is block 2.delayblock(2) -indicates the operation is delayblock 3.unblock(3) -indicates the operation is unblock 4.reset(4) -indicates the operation is reset 5.nearloop(5) -indicates the operation is nearloop 6.farloop(6) -indicates the operation is farloop 7.unloop(7) -indicates the operation is unloop " ::= { hwIsdnV5PortDataEntry 13 } -- hwIsdnBraPortAttrTable parameters hwIsdnBraPortAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIsdnBraPortAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configuration table of the ISDN BRA port attributes. The index of this table is hwIsdnBraPortIndex. " ::= { hwMD5500BRAPort 3 } hwIsdnBraPortAttrEntry OBJECT-TYPE SYNTAX HwIsdnBraPortAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configuration table of the ISDN BRA port attributes. The index of this entry is hwIsdnBraPortIndex. " INDEX { hwIsdnBraPortIndex } ::= { hwIsdnBraPortAttrTable 1 } HwIsdnBraPortAttrEntry ::= SEQUENCE { hwIsdnBraPortIndex Integer32, hwMgIsdnTerminationRPower INTEGER, hwIsdnbraPortWorkMode INTEGER, hwIsdnbraPortBad INTEGER, hwIsdnbraPortBadDelay Integer32, hwMgIsdnBraCodeMode INTEGER, hwMgIsdnBraL1ActiveMode INTEGER, hwMgIsdnBraL2InfoMonitorEnable INTEGER } hwIsdnBraPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Shelf/Slot/Port " ::= { hwIsdnBraPortAttrEntry 1 } hwMgIsdnTerminationRPower OBJECT-TYPE SYNTAX INTEGER{disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION " Whether the remote supply is supported. 0-Disable; 1-Enable. Options: 1. disable(0) -Disable the remote supply 2. enable(1) -Enable the remote supply " ::= { hwIsdnBraPortAttrEntry 2 } hwIsdnbraPortWorkMode OBJECT-TYPE SYNTAX INTEGER{p2mp(0), p2p(1)} MAX-ACCESS read-write STATUS current DESCRIPTION " The change of the working mode of the BRA port may take effect after the board is reset. If the board type is H601DSLD, it need not be reset. If the board type is DSL, it needs to be reset. Options: 1.p2mp(0) --point to multi-points 2.p2p(1) --point to point " ::= { hwIsdnBraPortAttrEntry 3 } hwIsdnbraPortBad OBJECT-TYPE SYNTAX INTEGER{disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION " Options: 1.disable(0) -disable 2.enable(1) -enable " ::= { hwIsdnBraPortAttrEntry 4 } hwIsdnbraPortBadDelay OBJECT-TYPE SYNTAX Integer32(10..360) MAX-ACCESS read-write STATUS current DESCRIPTION " Deactivation delay of the BRA basic access (unit: second) " ::= { hwIsdnBraPortAttrEntry 5 } hwMgIsdnBraCodeMode OBJECT-TYPE SYNTAX INTEGER{code-2B1Q(0), code-4B3T(1)} MAX-ACCESS read-only STATUS current DESCRIPTION " Options: 1.code-2B1Q(0) -indicates the mode is 2b1q 2.code-4B3T(1) -indicates the mode is 4b3t " ::= { hwIsdnBraPortAttrEntry 6 } hwMgIsdnBraL1ActiveMode OBJECT-TYPE SYNTAX INTEGER{longActive(1),notLongActive(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Options: 1.longActive(1) --stable-active 2.notLongActive(2) --unstable-active " DEFVAL { {longActive(1)} } ::= { hwIsdnBraPortAttrEntry 7 } hwMgIsdnBraL2InfoMonitorEnable OBJECT-TYPE SYNTAX INTEGER{disable(1),enable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Options: 1.disable(1) -disable the bra l2 monitor 2.enable(2) -enable the bra l2 monitor " DEFVAL { {enable(2)} } ::= { hwIsdnBraPortAttrEntry 8 } -- hwIsdnPortPerformanceStatTable parameters hwIsdnPortPerformanceStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIsdnPortPerformanceStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configuration table of the ISDN BRA performance statistics function. The index of this table is hwIsdnPortIndex. " ::= { hwMD5500BRAPort 4 } hwIsdnPortPerformanceStatEntry OBJECT-TYPE SYNTAX HwIsdnPortPerformanceStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configuration table of the ISDN BRA performance statistics function. The index of this entry is hwIsdnPortIndex. " INDEX { hwIsdnPortIndex } ::= { hwIsdnPortPerformanceStatTable 1 } HwIsdnPortPerformanceStatEntry ::= SEQUENCE { hwIsdnPortIndex Integer32, hwIsdnPortPerformanceStatOprType INTEGER, hwIsdnPortPerformanceStatPeri Integer32, hwIsdnPortErrorcode Integer32, hwIsdnPortNebeUas Integer32, hwIsdnPortFebeUas Integer32, hwIsdnPortNebeEs Integer32, hwIsdnPortFebeEs Integer32, hwIsdnPortNebeSes Integer32, hwIsdnPortFebeSes Integer32 } hwIsdnPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Shelf/Slot/Port " ::= { hwIsdnPortPerformanceStatEntry 1 } hwIsdnPortPerformanceStatOprType OBJECT-TYPE SYNTAX INTEGER{stop(0), start(1)} MAX-ACCESS read-write STATUS current DESCRIPTION " Options: 1.stop(0) -stop the performance statistics 2.start(1) -start the performance statistics " ::= { hwIsdnPortPerformanceStatEntry 2 } hwIsdnPortPerformanceStatPeri OBJECT-TYPE SYNTAX Integer32(0..5) MAX-ACCESS read-write STATUS current DESCRIPTION " Starting cycle (minute). " ::= { hwIsdnPortPerformanceStatEntry 3 } hwIsdnPortErrorcode OBJECT-TYPE SYNTAX Integer32(0 |50..84) MAX-ACCESS read-write STATUS current DESCRIPTION " Error bit threshold setting. " ::= { hwIsdnPortPerformanceStatEntry 4 } hwIsdnPortNebeUas OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Near end block error (NEBE). " ::= { hwIsdnPortPerformanceStatEntry 5 } hwIsdnPortFebeUas OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Far end block error (FEBE). " ::= { hwIsdnPortPerformanceStatEntry 6 } hwIsdnPortNebeEs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Near end block error (NEBE) errored second (s). " ::= { hwIsdnPortPerformanceStatEntry 7 } hwIsdnPortFebeEs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Far end block error (FEBE) errored second (s). " ::= { hwIsdnPortPerformanceStatEntry 8 } hwIsdnPortNebeSes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Near end block error (NEBE) severely errored second (s). " ::= { hwIsdnPortPerformanceStatEntry 9 } hwIsdnPortFebeSes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Far end block error (FEBE) severely errored second (s). " ::= { hwIsdnPortPerformanceStatEntry 10 } hwIsdnBraL1CRCErrTable OBJECT IDENTIFIER ::= { hwMD5500BRAPort 5} hwIsdnBraL1DMDegradedThreshold OBJECT-TYPE SYNTAX Integer32(1..60) MAX-ACCESS read-write STATUS current DESCRIPTION " BRA degraded-minutes degrade threshold. " ::= { hwIsdnBraL1CRCErrTable 1 } hwIsdnBraL1ESDegradedThreshold OBJECT-TYPE SYNTAX Integer32(1..3600) MAX-ACCESS read-write STATUS current DESCRIPTION " BRA errored-seconds degrade threshold. " ::= { hwIsdnBraL1CRCErrTable 2 } hwIsdnBraL1CSESDegradedThreshold OBJECT-TYPE SYNTAX Integer32(1..60) MAX-ACCESS read-write STATUS current DESCRIPTION " BRA consecutive-severely-errored-seconds degrade threshold. " ::= { hwIsdnBraL1CRCErrTable 3 } hwIsdnBraL1DMAlarmThreshold OBJECT-TYPE SYNTAX Integer32(1..60) MAX-ACCESS read-write STATUS current DESCRIPTION " BRA consecutive-severely-errored-seconds degrade threshold. " ::= { hwIsdnBraL1CRCErrTable 4 } hwIsdnBraL1ESAlarmThreshold OBJECT-TYPE SYNTAX Integer32(1..3600) MAX-ACCESS read-write STATUS current DESCRIPTION " BRA errored-seconds alarm threshold. " ::= { hwIsdnBraL1CRCErrTable 5 } hwIsdnBraL1CSESAlarmThreshold OBJECT-TYPE SYNTAX Integer32(1..60) MAX-ACCESS read-write STATUS current DESCRIPTION " BRA consecutive-severely-errored-seconds alarm threshold. " ::= { hwIsdnBraL1CRCErrTable 6 } hwIsdnBraL1CRCErrESThreshold OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION " BRA errored-seconds define threshold. " ::= { hwIsdnBraL1CRCErrTable 7 } hwIsdnBraL1CRCErrSESThreshold OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION " BRA severely-errored-seconds define threshold. " ::= { hwIsdnBraL1CRCErrTable 8 } hwIsdnBraL1CRCErrDMThreshold OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-write STATUS current DESCRIPTION " BRA degraded-minutes define threshold. " ::= { hwIsdnBraL1CRCErrTable 9 } hwIsdnTEICheckCfgTable OBJECT IDENTIFIER ::= { hwMD5500BRAPort 6} hwIsdnTEICheckCycle OBJECT-TYPE SYNTAX Integer32(0..180) MAX-ACCESS read-write STATUS current DESCRIPTION " TEI check period (unit: minute). " ::= { hwIsdnTEICheckCfgTable 1 } hwIsdnL2DegradedAlarmCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIsdnL2DegradedAlarmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ISDN L2 degraded alarm configuration table. The index of this table is hwIsdnBraL2DAPortIndex. " ::= { hwMD5500BRAPort 7 } hwIsdnL2DegradedAlarmCfgEntry OBJECT-TYPE SYNTAX HwIsdnL2DegradedAlarmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ISDN L2 degraded alarm configuration table. The index of this entry is hwIsdnBraL2DAPortIndex." INDEX { hwIsdnBraL2DAPortIndex } ::= { hwIsdnL2DegradedAlarmCfgTable 1 } HwIsdnL2DegradedAlarmCfgEntry ::= SEQUENCE { hwIsdnBraL2DAPortIndex Integer32, hwIsdnBraL2DAUnexpectRespondThreshold Integer32, hwIsdnBraL2DARebuiltLinkRequestThreshold Integer32, hwIsdnBraL2DAN200OutTimeThreshold Integer32, hwIsdnBraL2DAQ921AddrDomainErrThreshold Integer32, hwIsdnBraL2DAMDLERRJThreshold Integer32, hwIsdnBraL2DAMDLERRKThreshold Integer32, hwIsdnBraL2DAMDLERRLThreshold Integer32, hwIsdnBraL2DAMDLERRMThreshold Integer32, hwIsdnBraL2DAMDLERRNThreshold Integer32, hwIsdnBraL2DAMDLERROThreshold Integer32, hwIsdnBraL2DAFrameSNErrThreshold Integer32, hwIsdnBraL2DABufferOverFlowThreshold Integer32 } hwIsdnBraL2DAPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Port index. Shelf<<24|Slot<<16|Port. " ::= { hwIsdnL2DegradedAlarmCfgEntry 1 } hwIsdnBraL2DAUnexpectRespondThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Unsolicited responses received. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 2 } hwIsdnBraL2DARebuiltLinkRequestThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Peer initiated re-establishments when in multiple frame established state. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 3 } hwIsdnBraL2DAN200OutTimeThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Unsuccessful re-transmissions N200 times. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 4 } hwIsdnBraL2DAQ921AddrDomainErrThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Q.921 address field errors. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 5 } hwIsdnBraL2DAMDLERRJThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Q.921 MDL errors J. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 6 } hwIsdnBraL2DAMDLERRKThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Q.921 MDL errors K. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 7 } hwIsdnBraL2DAMDLERRLThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Invalid/Unrecognized frame. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 8 } hwIsdnBraL2DAMDLERRMThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Unexpected/Not permitted I-field received. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 9 } hwIsdnBraL2DAMDLERRNThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Q.921 MDL errors N. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 10 } hwIsdnBraL2DAMDLERROThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Excess octets in the information field. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 11 } hwIsdnBraL2DAFrameSNErrThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Frame check sequence errors. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 12 } hwIsdnBraL2DABufferOverFlowThreshold OBJECT-TYPE SYNTAX Integer32(0..25) MAX-ACCESS read-write STATUS current DESCRIPTION " Limit of buffer overflows. " DEFVAL { 0 } ::= { hwIsdnL2DegradedAlarmCfgEntry 13 } hwMD5500PortStateTrace OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 10 } --MIB table of the status-tracking LED hwPortStateTraceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortStateTraceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MIB table of this status-tracking LED. The index of this table is hwPortStateTraceFrameId. " ::= { hwMD5500PortStateTrace 1 } hwPortStateTraceEntry OBJECT-TYPE SYNTAX HwPortStateTraceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MIB table of this status-tracking LED. The index of this entry is hwPortStateTraceFrameId. " INDEX { hwPortStateTraceFrameId} ::= { hwPortStateTraceTable 1 } HwPortStateTraceEntry ::= SEQUENCE { hwPortStateTraceFrameId Integer32, hwPortStateTraceOprType INTEGER } hwPortStateTraceFrameId OBJECT-TYPE SYNTAX Integer32(0..240) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Frame ID(0..240) Shelf ID (0..240)." ::= {hwPortStateTraceEntry 1} hwPortStateTraceOprType OBJECT-TYPE SYNTAX INTEGER{stop(1), start(2) , handshake(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "Operation type (enumerated: 1-stop port status reporting; 2-start port status reporting; 3-handshake) Options: 1.stop(1) -stop the trace 2.start(2) -start the trace 3.handshake(3) -indicates the handshake of the trace " ::= { hwPortStateTraceEntry 2 } -- SPCM port MIB hwMD5500SPCMPort OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 11 } hwMD5500SPCMPortPhyTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMD5500SPCMPortPhyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this table are hwMD5500SPCMPortFrameIndex, hwMD5500SPCMPortSlotIndex, and hwMD5500SPCMPortIndex." ::= { hwMD5500SPCMPort 1 } hwMD5500SPCMPortPhyEntry OBJECT-TYPE SYNTAX HwMD5500SPCMPortPhyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexes of this entry are hwMD5500SPCMPortFrameIndex, hwMD5500SPCMPortSlotIndex, and hwMD5500SPCMPortIndex. " INDEX { hwMD5500SPCMPortFrameIndex, hwMD5500SPCMPortSlotIndex, hwMD5500SPCMPortIndex } ::= { hwMD5500SPCMPortPhyTable 1 } HwMD5500SPCMPortPhyEntry ::= SEQUENCE { hwMD5500SPCMPortFrameIndex Integer32, hwMD5500SPCMPortSlotIndex Integer32, hwMD5500SPCMPortIndex Integer32, hwMD5500SPCMInterfaceID Integer32, hwMD5500SPCMCASE1Ts Integer32, hwMD5500SPCMtelNo OCTET STRING, hwMD5500SPCMPortState INTEGER, hwMD5500SPCMServiceState INTEGER, hwMD5500SPCMOperate INTEGER, hwMD5500SPCMPortMaintainStatus INTEGER, hwMD5500SPCMRowStatus RowStatus } hwMD5500SPCMPortFrameIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwMD5500SPCMPortPhyEntry 1 } hwMD5500SPCMPortSlotIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwMD5500SPCMPortPhyEntry 2 } hwMD5500SPCMPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwMD5500SPCMPortPhyEntry 3 } hwMD5500SPCMInterfaceID OBJECT-TYPE SYNTAX Integer32 (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwMD5500SPCMPortPhyEntry 4 } hwMD5500SPCMCASE1Ts OBJECT-TYPE SYNTAX Integer32 (1..15 | 17..31) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwMD5500SPCMPortPhyEntry 5 } hwMD5500SPCMtelNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwMD5500SPCMPortPhyEntry 6 } hwMD5500SPCMPortState OBJECT-TYPE SYNTAX INTEGER { idle(1), fault(2), test(3), maintain(4), localblock(5), oppblock(6), lock(7), busy(8), viruser(9), farloop(10), nearloop(11), b1codetest(12), b2codetest(13) } MAX-ACCESS read-only STATUS current DESCRIPTION " Options: 1.idle(1) -indicates the port state is idle 2.fault(2) -indicates the port state is fault 3.test(3) -indicates the port state is test 4.maintain(4) -indicates the port state is maintain 5.localblock(5) -indicates the port state is localblock 6.oppblock(6) -indicates the port state is oppblock 7.lock(7) -indicates the port state is lock 8.busy(8) -indicates the port state is busy 9.viruser(9) -indicates the port state is viruser 10.farloop(10) -indicates the port state is farloop 11.nearloop(11) -indicates the port state is nearloop 12.b1codetest(12) -indicates the port state is b1codetest 13.b2codetest(13) -indicates the port state is b2codetest " ::= { hwMD5500SPCMPortPhyEntry 7 } hwMD5500SPCMServiceState OBJECT-TYPE SYNTAX INTEGER { outofservice(1), idle(2), calling(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " Options: 1.outofservice(1) -indicates the service state is outofservice 2.idle(2) -indicates the service state is idle 3.calling(3) -indicates the service state is calling " ::= { hwMD5500SPCMPortPhyEntry 8 } hwMD5500SPCMOperate OBJECT-TYPE SYNTAX INTEGER { reset(4), nearloop(5), unloop(6) } MAX-ACCESS read-write STATUS current DESCRIPTION " Options: 1.reset(4) -Operation is reset 2.nearloop(5) -Operation is near loop 3.unloop(6) -Operation is not loop " ::= { hwMD5500SPCMPortPhyEntry 9 } hwMD5500SPCMPortMaintainStatus OBJECT-TYPE SYNTAX INTEGER { mgcfged(1), v5cfged(2), notcfged(3), spcmcfged(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " Options: 1.mgcfged(1) -indicates the maintainstatus of the PSTN port is mgcfged 2.v5cfged(2) -indicates the maintainstatus of the PSTN port is v5cfged 3.notcfged(3) -indicates the maintainstatus of the PSTN port is notcfged 4.spcmcfged(4) -indicates the maintainstatus of the PSTN port is spcmcfged " ::= { hwMD5500SPCMPortPhyEntry 10 } hwMD5500SPCMRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { hwMD5500SPCMPortPhyEntry 11 } hwNarrowUserDataTrapSequence OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 12 } hwNarrowUserDataChangeSequencePstnV5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Serial number for reporting traps after the V5 PSTN user data changes. " ::= { hwNarrowUserDataTrapSequence 1 } hwNarrowUserDataChangeSequencePstnMG OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Serial number for reporting traps after the MG PSTN user data changes. " ::= { hwNarrowUserDataTrapSequence 2 } hwNarrowUserDataChangeSequencePstnSPCM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Serial number for reporting traps after the SPCM PSTN user data changes. " ::= { hwNarrowUserDataTrapSequence 3 } hwNarrowUserDataChangeSequenceIsdnV5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Serial number for reporting traps after the V5 ISDN user data changes. " ::= { hwNarrowUserDataTrapSequence 4 } hwNarrowUserDataChangeSequenceIsdnMG OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Serial number for reporting traps after the MG ISDN user data changes. " ::= { hwNarrowUserDataTrapSequence 5 } hwNarrowUserDataChangeSequenceDdiMG OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Serial number for reporting traps after the MG PSTN user data changes. " ::= { hwNarrowUserDataTrapSequence 6 } hwNarrowUserDataChangeSequenceCdiPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Serial number for reporting the traps after the CDI PORT attributes change. " ::= { hwNarrowUserDataTrapSequence 7 } hwNarrowUserDataChangeSequenceVfbPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Serial number for reporting the traps after the VFB PORT attributes change. " ::= { hwNarrowUserDataTrapSequence 8 } hwNarrowUserDataChangeSequencePraV5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Serial number for reporting the traps after the V5 PRA user data changes. " ::= { hwNarrowUserDataTrapSequence 9 } hwNarrowUserDataChangeSequencePraMG OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Serial number for reporting the traps after the MG PRA user data changes. " ::= { hwNarrowUserDataTrapSequence 10 } hwPortStateTraceTraps OBJECT IDENTIFIER ::= { hwMD5500PortStateTrace 2 } hwPortStateTraceTrapVbOids OBJECT IDENTIFIER ::= { hwPortStateTraceTraps 1} hwPortStateTraceFrame OBJECT-TYPE SYNTAX Integer32 (0..240) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " Shelf ID " ::= { hwPortStateTraceTrapVbOids 1 } hwPortStateTracePortNumber OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " Number of ports reported each time. " ::= { hwPortStateTraceTrapVbOids 2 } hwPortStateTraceSlotId OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " Slot ID in which the port is located " ::= { hwPortStateTraceTrapVbOids 3 } hwPortStateTracePortId OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " Port ID. " ::= { hwPortStateTraceTrapVbOids 4 } hwPortStateTracePortState OBJECT-TYPE SYNTAX INTEGER { fault(1), testing(2), lock(3), idle(4), busy(5), remoteloop(6), localloop(7), deactive(8), active(9) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " Options: 1.fault(1) -indicates the state of the trace port is fault 2.testing(2) -indicates the state of the trace port is testing 3.lock(3) -indicates the state of the trace port is lock 4.idle(4) -indicates the state of the trace port is idle 5.busy(5) -indicates the state of the trace port is busy 6.remoteloop(6) -indicates the state of the trace port is remoteloop 7.localloop(7) -indicates the state of the trace port is localloop 8.deactive(8) -indicates the state of the trace port is deactive 9.active(9) -indicates the state of the trace port is active " ::= { hwPortStateTraceTrapVbOids 5 } hwV5PortStateTraceTrap NOTIFICATION-TYPE OBJECTS { hwPortStateTraceFrame, hwPortStateTracePortNumber, hwPortStateTraceSlotId, hwPortStateTracePortId, hwPortStateTracePortState } STATUS current DESCRIPTION " For the V5 user port: Port state report trap: 1: frameid; 2: portnum; 3: slotid; 4: portid; 5: portstate. Port state: 1: failed; 2: test; 3: lock; 4: idle; 5: busy; 6: remote loop; 7: local loop; 8: BRA deactive; 9: BRA active. " ::= { hwPortStateTraceTraps 2 } hwAGPortStateTraceTrap NOTIFICATION-TYPE OBJECTS { hwPortStateTraceFrame, hwPortStateTracePortNumber, hwPortStateTraceSlotId, hwPortStateTracePortId, hwPortStateTracePortState } STATUS current DESCRIPTION " For the AG user port: Port state report trap: 1: frameid; 2: portnum; 3: slotid; 4: portid; 5: portstate. Portstate: 1: failed; 2: test; 3: lock; 4: idle; 5: busy; 6: remote loop; 7: local loop; 8: BRA deactive; 9: BRA active; 10: powerdeny. " ::= { hwPortStateTraceTraps 3 } -- majun add for hwc port start 060208 -- HWC PORT MIB ADD BY XUDONGJIAN 200509 START hwHwcPort OBJECT IDENTIFIER ::= { hwMD5500PortAdminMIB 13 } hwHwcPortPhyTable OBJECT-TYPE SYNTAX SEQUENCE OF HwHwcPortPhyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this table is hwHwcPortPhysicalIndex." ::= { hwHwcPort 1 } hwHwcPortPhyEntry OBJECT-TYPE SYNTAX HwHwcPortPhyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this entry is hwHwcPortPhysicalIndex." INDEX { hwHwcPortPhysicalIndex} ::= { hwHwcPortPhyTable 1 } HwHwcPortPhyEntry ::= SEQUENCE { hwHwcPortPhysicalIndex Integer32, hwHwcPortMasterSlaveState INTEGER, hwHwcPortPhysicalState INTEGER, hwHwcSwitchOperate INTEGER } hwHwcPortPhysicalIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { hwHwcPortPhyEntry 1 } hwHwcPortMasterSlaveState OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Options: 1.master(1) -indicates the smaster port state 2.slave(2) -indicates the slave port state " ::= { hwHwcPortPhyEntry 2 } hwHwcPortPhysicalState OBJECT-TYPE SYNTAX INTEGER { normal(1), fault(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Options: 1.normal(1) -indicates the physical state of the port is normal 2.fault(2) -indicates the physical state of the port is fault " ::= { hwHwcPortPhyEntry 3 } hwHwcSwitchOperate OBJECT-TYPE SYNTAX INTEGER { switch(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Options: 1.switch(1) -indicates the switch " ::= { hwHwcPortPhyEntry 4 } -- majun add for hwc port end 060208 -- HWC PORT MIB ADD BY XUDONGJIAN 200509 END END