1505 lines
50 KiB
Plaintext
1505 lines
50 KiB
Plaintext
-- =================================================================
|
|
-- Copyright (C) 2010 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
-- Description: The mib is used for defining huawei's MSU SDH ports
|
|
-- management MIB objects.
|
|
-- Reference:
|
|
-- Version: V1.13
|
|
-- =================================================================
|
|
|
|
HUAWEI-MSU-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64, Integer32,
|
|
IpAddress, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
MacAddress,TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
ifIndex
|
|
FROM IF-MIB
|
|
hwFrameIndex, hwSlotIndex, hwPortIndex
|
|
FROM HUAWEI-DEVICE-MIB
|
|
huaweiUtility
|
|
FROM HUAWEI-MIB;
|
|
|
|
hwSdh MODULE-IDENTITY
|
|
LAST-UPDATED "201210190000Z"
|
|
ORGANIZATION "Huawei Technologies co.,Ltd."
|
|
CONTACT-INFO
|
|
"Huawei Industrial Base
|
|
Bantian, Longgang
|
|
Shenzhen 518129
|
|
People's Republic of China
|
|
Website: http://www.huawei.com
|
|
Email: support@huawei.com
|
|
"
|
|
DESCRIPTION "The mib is used for defining huawei's MSU SDH ports
|
|
management MIB objects."
|
|
|
|
-- Revision history
|
|
REVISION "201210190000Z"
|
|
DESCRIPTION "V1.13, changes in this revision:
|
|
added leaf node hwSdhGroupOvhdRecvJ0CheckSwitch to indicate the check switch of SDH overhead command J0.
|
|
added leaf node hwSdhGroupOvhdRecvJ1CheckSwitch to indicate the check switch of SDH overhead command J1.
|
|
added leaf node hwSdhTriOvhdRecvJ2CheckSwitch to indicate the check switch of SDH overhead command J2.
|
|
"
|
|
|
|
REVISION "201011090900Z"
|
|
DESCRIPTION "V1.12, modified the description of MIB. "
|
|
|
|
REVISION "201010140900Z"
|
|
DESCRIPTION "V1.11, add enumeration invalid(-1) for leaf hwSdhTrivc12RTPSwitch.
|
|
"
|
|
|
|
REVISION "201008230900Z"
|
|
DESCRIPTION "V1.10, modified the description of mib.
|
|
"
|
|
|
|
REVISION "201004010900Z"
|
|
DESCRIPTION "V1.09, changes in this revision:
|
|
Modified the syntax error.
|
|
"
|
|
|
|
REVISION "201001120900Z"
|
|
DESCRIPTION "V1.08, changes in this revision:
|
|
Added the definition of the trap node, including:
|
|
hwSdhSignalDegradeAlarmTrap
|
|
hwSdhRemoteDefectTributaryAlarmTrap
|
|
hwSdhAISAbnormalAlarmTrap
|
|
hwSdhRemoteDefectSignalAlarmTrap
|
|
hwSDHLayerFrameLostAlarmTrap
|
|
hwSDHPortFailReceiveSignalAlarmTrap
|
|
hwSDHAISTributaryLayerAbnormalAlarmTrap
|
|
hwSDHFaultOccurrAlarmTrap
|
|
hwSDHConnectionFaultAlarmTrap
|
|
hwSDHSignalDegradeRecoverAlarmTrap
|
|
hwSDHRecoverTributaryLayerAlarmTrap
|
|
hwSDHAISLineRecoversAlarmTrap
|
|
hwSDHLineRecoversSignalLineAlarmTrap
|
|
hwSDHFrameLossRecoverAlarmTrap
|
|
hwSDHSignalReceiveFailureRecoverAlarmTrap
|
|
hwSDHAISTributaryRecoverAlarmTrap
|
|
hwSDHAISRecoverFromAbnormalAlarmTrap
|
|
hwSDHRDIRecoverFromAbnormalAlarmTrap
|
|
"
|
|
REVISION "201001070900Z"
|
|
DESCRIPTION "V1.07, changes in this revision:
|
|
Added leaf node hwSdhTrivc12RTPSwitch in table hwSdhTributaryTable for the MSU SDH tributary management.
|
|
"
|
|
|
|
REVISION "200903060900Z"
|
|
DESCRIPTION "V1.05, changes in this revision:
|
|
Imported type MacAddress and TEXTUAL-CONVENTION from SNMPv2-TC file.
|
|
Modified the name of leaf node hwAlarmLevelTable to hwAlarmLevel.
|
|
Added leaf nodes hwSdhTrivc12AlarmState, hwSdhTrivc12JitterBuffer.
|
|
Anded hwSdhTrivc12ClockMode in table hwSdhTributaryTable for the MSU SDH tributary management.
|
|
Added leaf nodes hwSdhInterfaceIP and hwSdhInterfaceMac in table
|
|
hwSdhGroupTable for the MSU SDH group management.
|
|
"
|
|
|
|
REVISION "200810310900Z"
|
|
DESCRIPTION "V1.03, changes in this revision:
|
|
Imported new types Integer32 and Counter64 from SNMPv2-SMI file.
|
|
Modified the name of object hwMsuMibObjects to hMibObjects.
|
|
Modified the OID of hwSdhMibObjects to 1.3.6.1.4.1.2011.6.38.1.
|
|
Added table hwSdhTributaryPerformCountTable for the vc12 tributaryperformance information management.
|
|
Added table hwSdhGroupPerformCountTable for the STM-1 port performance information management.
|
|
Modified the name of table hwMsuAlarmLevelTable to hwAlarmLevelTable.
|
|
Modified the OID of table hwAlarmLevelTable to 1.3.6.1.4.1.2011.6.38.1.2.
|
|
Modified the name of table hwMsuSdhTributaryTable to hwSdhTributaryTable.
|
|
Modified the OID of table hwSdhTributaryTable to 1.3.6.1.4.1.2011.6.38.1.1.
|
|
Added leaf nodes hwSdhTrivc12channlesstate and hwSdhTriPerfAdminStatus in table
|
|
hwSdhTributaryTable for the MSU SDH tributary management.
|
|
Modified the name of table hwMsuSdhGroupTable to hwSdhGroupTable.
|
|
Modified the OID of table hwSdhGroupTable to hwAlarmLevelTable to 1.3.6.1.4.1.2011.6.38.1.0.
|
|
Added leaf nodes hwSdhOpticPowerSDThreshold and hwSdhGroupPerfAdminStatus in table hwSdhGroupTable
|
|
for the MSU SDH group management.
|
|
"
|
|
|
|
REVISION "200805290900Z"
|
|
DESCRIPTION "V1.01, changes in this revision:
|
|
Modified the description of all leaf nodes.
|
|
"
|
|
|
|
REVISION "200209020900Z"
|
|
DESCRIPTION "V1.00, initial version."
|
|
::= { huaweiUtility 38 }
|
|
|
|
hwSdhMibObjects OBJECT IDENTIFIER ::= { hwSdh 1 }
|
|
|
|
hwSdhGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwSdhGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for the MSU SDH group management,
|
|
such as physical status of the MSU optical port.
|
|
The index of this table is ifIndex.
|
|
"
|
|
::= { hwSdhMibObjects 0 }
|
|
|
|
hwSdhGroupEntry OBJECT-TYPE
|
|
SYNTAX HwSdhGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for the MSU SDH group management,
|
|
such as physical status of the MSU optical port.
|
|
The index of this entry is ifIndex.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { hwSdhGroupTable 1 }
|
|
|
|
HwSdhGroupEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwSdhInterfaceState
|
|
INTEGER,
|
|
hwSdhInterfaceLineState
|
|
INTEGER,
|
|
hwSdhInterfaceFiberType
|
|
INTEGER,
|
|
hwSdhInterfacePhyType
|
|
INTEGER,
|
|
hwSdhInterfaceLineType
|
|
INTEGER,
|
|
hwSdhInterfaceSpeed
|
|
INTEGER,
|
|
hwSdhInterfaceTxClock
|
|
INTEGER,
|
|
hwSdhGroupLoopType
|
|
INTEGER,
|
|
hwSdhTriNumberMode
|
|
INTEGER,
|
|
hwSdhGroupOvhdSendJ0Type
|
|
INTEGER,
|
|
hwSdhGroupOvhdSendJ0String
|
|
OCTET STRING(SIZE(0..15)),
|
|
hwSdhGroupOvhdRecvJ0Type
|
|
INTEGER,
|
|
hwSdhGroupOvhdRecvJ0String
|
|
OCTET STRING(SIZE(0..15)),
|
|
hwSdhGroupOvhdSendJ1Type
|
|
INTEGER,
|
|
hwSdhGroupOvhdSendJ1String
|
|
OCTET STRING(SIZE(0..62)),
|
|
hwSdhGroupOvhdRecvJ1Type
|
|
INTEGER,
|
|
hwSdhGroupOvhdRecvJ1String
|
|
OCTET STRING(SIZE(0..62)),
|
|
hwSdhGroupOvhdSendS1Value
|
|
Integer32,
|
|
hwSdhGroupOvhdSendC2Value
|
|
Integer32,
|
|
hwSdhGroupOvhdRecvedJ0Type
|
|
INTEGER,
|
|
hwSdhGroupOvhdRecvedJ0String
|
|
OCTET STRING(SIZE(0..15)),
|
|
hwSdhGroupOvhdRecvedJ1Type
|
|
INTEGER,
|
|
hwSdhGroupOvhdRecvedJ1String
|
|
OCTET STRING(SIZE(0..62)),
|
|
hwSdhGroupOvhdRecvedS1
|
|
Integer32,
|
|
hwSdhGroupOvhdRecvedC2
|
|
Integer32,
|
|
hwSdhGroupAlarmState
|
|
Integer32,
|
|
hwSdhOpticPowerSDThreshold
|
|
INTEGER,
|
|
hwSdhGroupPerfAdminStatus
|
|
INTEGER,
|
|
hwSdhInterfaceIP
|
|
IpAddress,
|
|
hwSdhInterfaceMac
|
|
MacAddress,
|
|
hwSdhGroupOvhdRecvJ0CheckSwitch
|
|
INTEGER,
|
|
hwSdhGroupOvhdRecvJ1CheckSwitch
|
|
INTEGER
|
|
}
|
|
|
|
hwSdhInterfaceState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
fault(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Physical status of the MSU optical port.
|
|
Options:
|
|
1. normal(1) -physical status of the MSU optical port is normal
|
|
2. fault(2) -physical status of the MSU optical port is fault
|
|
"
|
|
::= { hwSdhGroupEntry 1 }
|
|
|
|
hwSdhInterfaceLineState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
signal(1),
|
|
noSignal(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Working status of the line of the MSU optical port.
|
|
Options:
|
|
1. signal(1) -working status of the line of the MSU optical port is signal
|
|
2. noSignal(2) -working status of the line of the MSU optical port is noSignal
|
|
"
|
|
::= { hwSdhGroupEntry 2 }
|
|
|
|
hwSdhInterfaceFiberType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
singleMode(1),
|
|
multipleMode(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the fiber connected to the MSU optical port.
|
|
Options:
|
|
1. singleMode(1) -single-mode
|
|
2. multipleMode(2) -multi-mode
|
|
3. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhGroupEntry 3 }
|
|
|
|
hwSdhInterfacePhyType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
optical(1),
|
|
electric(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Physical type of the MSU port.
|
|
Options:
|
|
1. optical(1) -physical type of the MSU port is optical
|
|
2. electric(2) -physical type of the MSU port is electric
|
|
"
|
|
::= { hwSdhGroupEntry 4 }
|
|
|
|
hwSdhInterfaceLineType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
stm1(1),
|
|
stm4(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Line type of the MSU optical port.
|
|
Options:
|
|
1. stm1(1) -line type of the MSU optical port is stm1
|
|
2. stm4(2) -line type of the MSU optical port is stm4
|
|
"
|
|
::= { hwSdhGroupEntry 5 }
|
|
|
|
hwSdhInterfaceSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
speed155(1),
|
|
speed622(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate of the MSU optical port.
|
|
Options:
|
|
1. speed155(1) -rate of the MSU optical port is 155 Mbps
|
|
2. speed622(2) -rate of the MSU optical port is 622 Mbps
|
|
3. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhGroupEntry 6 }
|
|
|
|
hwSdhInterfaceTxClock OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
system(1),
|
|
sdh(2),
|
|
line0(3),
|
|
line1(4),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx clock of the MSU optical port.
|
|
Options:
|
|
1. system(1) -tx clock of the MSU optical port is system
|
|
2. sdh(2) -tx clock of the MSU optical port is sdh
|
|
3. line0(3) -tx clock of the MSU optical port is line0
|
|
4. line1(4) -tx clock of the MSU optical port is line1
|
|
5. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhGroupEntry 7 }
|
|
|
|
hwSdhGroupLoopType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noLoop(1),
|
|
localLoop(2),
|
|
remoteLoop(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the loopback test on the MSU optical port.
|
|
Options:
|
|
1. noLoop(1) -no loopback
|
|
2. localLoop(2) -local loopback
|
|
3. remoteLoop(3) -remote loopback
|
|
"
|
|
::= { hwSdhGroupEntry 8 }
|
|
|
|
hwSdhTriNumberMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
huawei(1),
|
|
lucent(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SDH tributary numbering mode of the MSU optical port.
|
|
Options:
|
|
1. huawei(1) -SDH tributary numbering mode of the MSU optical port is huawei
|
|
2. lucent(2) -SDH tributary numbering mode of the MSU optical port is lucent
|
|
"
|
|
::= { hwSdhGroupEntry 9 }
|
|
|
|
hwSdhGroupOvhdSendJ0Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
short(1),
|
|
long(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the sended MSU SDH overhead command J0.
|
|
Options:
|
|
1. short(1) -type of the MSU SDH overhead command J0 is short
|
|
2. long(2) -type of the MSU SDH overhead command J0 is long
|
|
3. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhGroupEntry 10 }
|
|
|
|
hwSdhGroupOvhdSendJ0String OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Send character string of the SDH overhead command J0.
|
|
"
|
|
::= { hwSdhGroupEntry 11 }
|
|
|
|
hwSdhGroupOvhdRecvJ0Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
short(1),
|
|
long(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the received MSU SDH overhead command J0.
|
|
Options:
|
|
1. short(1) -type of the MSU SDH overhead command J0 is short
|
|
2. long(2) -type of the MSU SDH overhead command J0 is long
|
|
3. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhGroupEntry 12 }
|
|
|
|
hwSdhGroupOvhdRecvJ0String OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive character string of the SDH overhead command J0.
|
|
"
|
|
::= { hwSdhGroupEntry 13 }
|
|
|
|
hwSdhGroupOvhdSendJ1Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
short(1),
|
|
long(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the sended MSU SDH overhead command word J1.
|
|
Options:
|
|
1. short(1) -type of the MSU SDH overhead command word J1 is short
|
|
2. long(2) -type of the MSU SDH overhead command word J1 is long
|
|
3. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhGroupEntry 14 }
|
|
|
|
hwSdhGroupOvhdSendJ1String OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..62))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Send character string of the SDH overhead command J1.
|
|
"
|
|
::= { hwSdhGroupEntry 15 }
|
|
|
|
hwSdhGroupOvhdRecvJ1Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
short(1),
|
|
long(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the received MSU SDH overhead command word J1.
|
|
Options:
|
|
1. short(1) -type of the MSU SDH overhead command word J1 is short
|
|
2. long(2) -type of the MSU SDH overhead command word J1 is long
|
|
3. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhGroupEntry 16 }
|
|
|
|
hwSdhGroupOvhdRecvJ1String OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..62))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive character string of the SDH overhead command J1.
|
|
"
|
|
::= { hwSdhGroupEntry 17 }
|
|
|
|
hwSdhGroupOvhdSendS1Value OBJECT-TYPE
|
|
SYNTAX Integer32(0..255 | -1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Send value of SDH overhead command word S1.
|
|
"
|
|
::= { hwSdhGroupEntry 18 }
|
|
|
|
hwSdhGroupOvhdSendC2Value OBJECT-TYPE
|
|
SYNTAX Integer32(0..255 | -1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Send value of the SDH overhead command word C2.
|
|
"
|
|
::= { hwSdhGroupEntry 19 }
|
|
|
|
hwSdhGroupOvhdRecvedJ0Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
short(1),
|
|
long(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the received MSU SDH overhead command word J0.
|
|
Options:
|
|
1. short(1) -type of the MSU SDH overhead command word J0 is short
|
|
2. long(2) -type of the MSU SDH overhead command word J0 is long
|
|
3. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhGroupEntry 20 }
|
|
|
|
hwSdhGroupOvhdRecvedJ0String OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive character string of the SDH overhead command J0.
|
|
"
|
|
::= { hwSdhGroupEntry 21 }
|
|
|
|
hwSdhGroupOvhdRecvedJ1Type OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
short(1),
|
|
long(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the received MSU SDH overhead command word J1.
|
|
Options:
|
|
1. short(1) -type of the MSU SDH overhead command word J1 is short
|
|
2. long(2) -type of the MSU SDH overhead command word J1 is long
|
|
3. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhGroupEntry 22 }
|
|
|
|
hwSdhGroupOvhdRecvedJ1String OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..62))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive character string of the SDH overhead command J1.
|
|
"
|
|
::= { hwSdhGroupEntry 23 }
|
|
|
|
hwSdhGroupOvhdRecvedS1 OBJECT-TYPE
|
|
SYNTAX Integer32(0..255 | -1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive value of the SDH overhead command word S1.
|
|
"
|
|
::= { hwSdhGroupEntry 24 }
|
|
|
|
hwSdhGroupOvhdRecvedC2 OBJECT-TYPE
|
|
SYNTAX Integer32(0..255 | -1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive value of the SDH overhead command word C2.
|
|
"
|
|
::= { hwSdhGroupEntry 25 }
|
|
|
|
hwSdhGroupAlarmState OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the SDH group alarm state, per bit indicates one kind of alarm, 1 means exist 0 means not exist.
|
|
0xFFFFFFFF,means invalid value
|
|
bit0 =RLOS receive loss of signal alarm exist
|
|
bit1 =ROOF receive overlap of frame alarm exist
|
|
bit2 =RLOF receiver loss of frame alarm exist
|
|
bit3 =B1-OVER Errored Code over Threshold in Regenerator Section alarm
|
|
bit4 =MS-AIS Alarm Indication Signal in Multiplex Section
|
|
bit5 =MS-RDI Remote Defect Indication in Multiplex Section
|
|
bit6 =B2-OVER Errored Code over Threshold in Multiplex Section
|
|
bit7 =B2-SD Signal Degrade in Multiplex Section
|
|
bit8 =MS-REI Remote Error Indication in Multiplex Section
|
|
bit9 =J0MM Trace Identifier Mismatch in Regenerator Section
|
|
bit10=B1-SD Signal Degrade in Regenerator Section alarm
|
|
bit11=B1-BOVER Errored Code Block over Threshold in Regenerator Section alarm
|
|
bit12=TLOS send loss of signal alarm exist
|
|
bit13=AULOP Loss of Pointer in Administrative Unit
|
|
bit14=B3-SD Signal Degrade in Higher order Path
|
|
bit15=B3-OVER Errored Code over Threshold in Higher order Path
|
|
bit16=HP-TIM Trace Identifier Mismatch in Higher order Path
|
|
bit17=HP-SLM PayLoad Mismatch in Higher order Path
|
|
bit18=HP-RDI Remote Defect Indication in Higher order Path
|
|
bit19=AU-AIS Alarm Indication Signal in Administrative Unit
|
|
bit20=LOM Loss of Multiframe
|
|
bit21=HP-UNEQ Higher order Path UnEquipped
|
|
bit22=HP-REI Higher order Path Remote Error Indication
|
|
others, no used, reserve to 0
|
|
"
|
|
::= { hwSdhGroupEntry 26 }
|
|
|
|
hwSdhOpticPowerSDThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
eminus5(5),
|
|
eminus6(6),
|
|
eminus7(7),
|
|
eminus8(8),
|
|
eminus9(9)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level of threshold for sd of optic port.
|
|
Options:
|
|
1. eminus5(5) -1.0e-5(5)
|
|
2. eminus6(6) -1.0e-6(6)
|
|
3. eminus7(7) -1.0e-7(7)
|
|
4. eminus8(8) -1.0e-8(8)
|
|
5. eminus9(9) -1.0e-9(9)
|
|
"
|
|
::= { hwSdhGroupEntry 27 }
|
|
|
|
hwSdhGroupPerfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reset(1),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation of the performance on the port.
|
|
Options:
|
|
1. reset(1) -the operation of the performance on the port is reset
|
|
2. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhGroupEntry 28 }
|
|
|
|
hwSdhInterfaceIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of STM-1 port.
|
|
"
|
|
::= { hwSdhGroupEntry 29 }
|
|
|
|
hwSdhInterfaceMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Mac address of STM-1 port.
|
|
"
|
|
::= { hwSdhGroupEntry 30 }
|
|
|
|
hwSdhGroupOvhdRecvJ0CheckSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the check switch of SDH overhead command J0.
|
|
Options:
|
|
1. enable(1) -indicates that SDH overhead command J0 to be checked.
|
|
2. disable(2) -indicates that SDH overhead command J0 not to be checked.
|
|
Default: enable(1)
|
|
"
|
|
DEFVAL { enable }
|
|
::= { hwSdhGroupEntry 31 }
|
|
|
|
hwSdhGroupOvhdRecvJ1CheckSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the check switch of SDH overhead command J1.
|
|
Options:
|
|
1. enable(1) -indicates that SDH overhead command J1 to be checked.
|
|
2. disable(2) -indicates that SDH overhead command J1 not to be checked.
|
|
Default: enable(1)
|
|
"
|
|
DEFVAL { enable }
|
|
::= { hwSdhGroupEntry 32 }
|
|
|
|
hwSdhTributaryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwSdhTributaryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for the MSU SDH tributary management,
|
|
such as type of the loopback test on the MSU SDH tributary.
|
|
The index of this table is ifIndex.
|
|
"
|
|
::= { hwSdhMibObjects 1 }
|
|
|
|
hwSdhTributaryEntry OBJECT-TYPE
|
|
SYNTAX HwSdhTributaryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for the MSU SDH tributary management,
|
|
such as type of the loopback test on the MSU SDH tributary.
|
|
The index of this entry is ifIndex.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { hwSdhTributaryTable 1 }
|
|
|
|
HwSdhTributaryEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwSdhTriLoopType
|
|
INTEGER,
|
|
hwSdhTriOvhdSendJ2String
|
|
OCTET STRING(SIZE(0..15)),
|
|
hwSdhTriOvhdRecvJ2String
|
|
OCTET STRING(SIZE(0..15)),
|
|
hwSdhTriOvhdSendV5Value
|
|
Integer32,
|
|
hwSdhTriOvhdRecvedJ2
|
|
OCTET STRING(SIZE(0..15)),
|
|
hwSdhTriOvhdRecvedV5
|
|
Integer32,
|
|
hwSdhTriAlarmState
|
|
Integer32,
|
|
hwSdhTrivc12channlesstate
|
|
INTEGER,
|
|
hwSdhTriPerfAdminStatus
|
|
INTEGER,
|
|
hwSdhTrivc12AlarmState
|
|
Integer32,
|
|
hwSdhTrivc12JitterBuffer
|
|
Integer32,
|
|
hwSdhTrivc12ClockMode
|
|
INTEGER,
|
|
hwSdhTrivc12RTPSwitch
|
|
INTEGER,
|
|
hwSdhTriOvhdRecvJ2CheckSwitch
|
|
INTEGER
|
|
}
|
|
|
|
hwSdhTriLoopType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noLoop(1),
|
|
localLoop(2),
|
|
remoteLoop(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the loopback test on the MSU SDH tributary.
|
|
Options:
|
|
1. noLoop(1) -no loopback
|
|
2. localLoop(2) -local loopback
|
|
3. remoteLoop(3) -remote loopback
|
|
"
|
|
::= { hwSdhTributaryEntry 1 }
|
|
|
|
hwSdhTriOvhdSendJ2String OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Send character string of the SDH overhead command J2.
|
|
"
|
|
::= { hwSdhTributaryEntry 2 }
|
|
|
|
hwSdhTriOvhdRecvJ2String OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive character string of the SDH overhead command J2.
|
|
"
|
|
::= { hwSdhTributaryEntry 3 }
|
|
|
|
hwSdhTriOvhdSendV5Value OBJECT-TYPE
|
|
SYNTAX Integer32(0..255 | -1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Send value of SDH overhead command word V5.
|
|
"
|
|
::= { hwSdhTributaryEntry 4 }
|
|
|
|
hwSdhTriOvhdRecvedJ2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive character string of the SDH overhead command J2.
|
|
"
|
|
::= { hwSdhTributaryEntry 5 }
|
|
|
|
hwSdhTriOvhdRecvedV5 OBJECT-TYPE
|
|
SYNTAX Integer32(0..255 | -1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive value of the SDH overhead command word V5.
|
|
"
|
|
::= { hwSdhTributaryEntry 6 }
|
|
|
|
hwSdhTriAlarmState OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SDH tributary unit alarm state, per bit indicates one kind of alarm,
|
|
1 means exist; 0 means not exist.
|
|
0xFFFFFFFF,means invalid value
|
|
bit0 = TU-AIS Alarm Indication Signal in Tributary Unit
|
|
bit1 = TU-LOP Loss of pointer in tributary unit
|
|
bit2 = LP-UNEQ Lower order Path UnEquipped
|
|
bit3 = LP-SLM PayLoad Mismatch in Lower order Path
|
|
bit4 = LP-TIM Trace Identifier Mismatch in Lower order Path
|
|
bit5 = LP-RFI Remote Failure Indication in Lower order Path
|
|
bit6 = LP-RDI Remote Defect Indication in Lower order Path
|
|
bit7 = SIZZEERR Pointer Size Error in Lower order Path
|
|
others, no used, reserve to 0
|
|
"
|
|
::= { hwSdhTributaryEntry 7 }
|
|
|
|
hwSdhTrivc12channlesstate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
distributed(1),
|
|
nondistributive(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SDH tributary unit path state.
|
|
Options:
|
|
1. distributed(1) -the SDH tributary unit path state is distributed
|
|
2. nondistributive(2) -the SDH tributary unit path state is nondistributive
|
|
3. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhTributaryEntry 8 }
|
|
|
|
|
|
hwSdhTriPerfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reset(1),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation of the performance on the port.
|
|
Options:
|
|
1. reset(1) -the operation of the performance on the port is reset
|
|
2. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhTributaryEntry 9 }
|
|
hwSdhTrivc12AlarmState OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SDH tributary unit alarm state, per bit indicates one kind of alarm, 1 means exist 0 means not exist.
|
|
0xFFFFFFFF,means invalid value
|
|
bit0 = AIS Remote Alarm Indication Signal in Tributary Unit
|
|
bit1 = RDI Remote Defect Indication in tributary unit
|
|
others, no used, reserve to 0
|
|
"
|
|
::= { hwSdhTributaryEntry 10}
|
|
|
|
hwSdhTrivc12JitterBuffer OBJECT-TYPE
|
|
SYNTAX Integer32 (500..8000 | -1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of JitterBuffer, must be multiple of 125.
|
|
Unit: us
|
|
"
|
|
::= { hwSdhTributaryEntry 11}
|
|
|
|
hwSdhTrivc12ClockMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
system(1),
|
|
line(2),
|
|
recovery(3),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of clock mode.
|
|
Options:
|
|
1. system(1) -system clock
|
|
2. line(2) -line clock
|
|
3. recovery(3) -recovery clock
|
|
4. invalid(-1) -invalid value
|
|
"
|
|
::= { hwSdhTributaryEntry 12}
|
|
|
|
hwSdhTrivc12RTPSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of RTP switch.
|
|
Options:
|
|
1. enable(1) -status of RTP switch is enable
|
|
2. disable(2) -status of RTP switch is disable
|
|
3. invalid(-1) -invalid value
|
|
Default: enable(1)
|
|
"
|
|
DEFVAL {enable}
|
|
::= { hwSdhTributaryEntry 13}
|
|
|
|
hwSdhTriOvhdRecvJ2CheckSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the check switch of SDH overhead command J2.
|
|
Options:
|
|
1. enable(1) -indicates that SDH overhead command J2 to be checked.
|
|
2. disable(2) -indicates that SDH overhead command J2 not to be checked.
|
|
Default: enable(1)
|
|
"
|
|
DEFVAL { enable }
|
|
::= { hwSdhTributaryEntry 14 }
|
|
|
|
hwAlarmLevelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwAlarmLevelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for the MSU alarm level management,
|
|
such as the alarm level of MSU.
|
|
The indexes of this table are hwFrameIndex, hwSlotIndex.
|
|
"
|
|
::= { hwSdhMibObjects 2 }
|
|
|
|
hwAlarmLevelEntry OBJECT-TYPE
|
|
SYNTAX HwAlarmLevelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for the MSU alarm level management,
|
|
such as the alarm level of MSU.
|
|
The indexes of this entry are hwFrameIndex, hwSlotIndex.
|
|
"
|
|
INDEX
|
|
{
|
|
hwFrameIndex, hwSlotIndex
|
|
}
|
|
::= { hwAlarmLevelTable 1 }
|
|
|
|
HwAlarmLevelEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwSdhAlarmLevel
|
|
INTEGER
|
|
}
|
|
|
|
hwSdhAlarmLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
critical(1),
|
|
major(2),
|
|
minor(3),
|
|
warning(4),
|
|
disable(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alarm level of MSU.
|
|
Options:
|
|
1. critical(1) -critical alarm can be reported
|
|
2. major(2) -major or critical alarm can be reported
|
|
3. minor(3) -minor or major or critical alarm can be reported
|
|
4. warning(4) -all alarm can be reported
|
|
5. disable(5) -all alarm disable be reported
|
|
"
|
|
::= { hwAlarmLevelEntry 1 }
|
|
|
|
hwSdhGroupPerformCountTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwSdhGroupPerformCountEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for the STM-1 port performance information management.
|
|
The index of this table is ifIndex.
|
|
"
|
|
::= { hwSdhMibObjects 3 }
|
|
|
|
hwSdhGroupPerformCountEntry OBJECT-TYPE
|
|
SYNTAX HwSdhGroupPerformCountEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for the STM-1 port performance information management.
|
|
The index of this entry is ifIndex.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { hwSdhGroupPerformCountTable 1 }
|
|
|
|
HwSdhGroupPerformCountEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwSdhGroupPerfOOFCount
|
|
Counter64,
|
|
hwSdhGroupPerfB1CNTCount
|
|
Counter64,
|
|
hwSdhGroupPerfB1BCNTCount
|
|
Counter64,
|
|
hwSdhGroupPerfB2CNTCount
|
|
Counter64,
|
|
hwSdhGroupPerfLFEBECount
|
|
Counter64,
|
|
hwSdhGroupPerfPPJECount
|
|
Counter64,
|
|
hwSdhGroupPerfNPJECount
|
|
Counter64,
|
|
hwSdhGroupPerfNDFCount
|
|
Counter64,
|
|
hwSdhGroupPerfRSESCount
|
|
Counter64,
|
|
hwSdhGroupPerfMSESCount
|
|
Counter64,
|
|
hwSdhGroupPerfMSFEESCount
|
|
Counter64,
|
|
hwSdhGroupPerfHPESCount
|
|
Counter64,
|
|
hwSdhGroupPerfHPFEESCount
|
|
Counter64,
|
|
hwSdhGroupPerfB3CNTCount
|
|
Counter64,
|
|
hwSdhGroupPerfPFEBECount
|
|
Counter64
|
|
}
|
|
|
|
hwSdhGroupPerfOOFCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of out of frame.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 1 }
|
|
|
|
hwSdhGroupPerfB1CNTCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bit Error number of B1.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 2 }
|
|
|
|
hwSdhGroupPerfB1BCNTCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Block Error number of B1.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 3 }
|
|
|
|
hwSdhGroupPerfB2CNTCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bit Error number of B2.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 4 }
|
|
|
|
hwSdhGroupPerfLFEBECount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiplex Section Far-end Bit Errorred number.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 5 }
|
|
|
|
hwSdhGroupPerfPPJECount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Positive justification event of AU pointer.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 6 }
|
|
|
|
hwSdhGroupPerfNPJECount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Negative justification event of AU pointer.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 7 }
|
|
|
|
hwSdhGroupPerfNDFCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"New data flag of AU pointer.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 8 }
|
|
|
|
hwSdhGroupPerfRSESCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Regenerator Section Errorred Second.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 9 }
|
|
|
|
hwSdhGroupPerfMSESCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiplex Section Errorred Second.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 10 }
|
|
|
|
hwSdhGroupPerfMSFEESCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multiplex Section Far-end Errorred Second.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 11 }
|
|
|
|
hwSdhGroupPerfHPESCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Higher Path Errorred Second.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 12 }
|
|
|
|
hwSdhGroupPerfHPFEESCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Higher Path Far-End Errorred Second.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 13 }
|
|
|
|
hwSdhGroupPerfB3CNTCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bit Error number of B3.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 14 }
|
|
|
|
hwSdhGroupPerfPFEBECount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Path Far-end bit error number.
|
|
"
|
|
::= { hwSdhGroupPerformCountEntry 15 }
|
|
|
|
hwSdhTributaryPerformCountTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwSdhTributaryPerformCountEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for the vc12 tributary performance information management.
|
|
The index of this table is ifIndex.
|
|
"
|
|
::= { hwSdhMibObjects 4 }
|
|
|
|
hwSdhTributaryPerformCountEntry OBJECT-TYPE
|
|
SYNTAX HwSdhTributaryPerformCountEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used for the vc12 tributary performance information management.
|
|
The index of this entry is ifIndex.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { hwSdhTributaryPerformCountTable 1 }
|
|
|
|
HwSdhTributaryPerformCountEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwSdhTriPerfLPESCount
|
|
Counter64,
|
|
hwSdhTriPerfLPFEESCount
|
|
Counter64
|
|
}
|
|
|
|
hwSdhTriPerfLPESCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Path Errored Second.
|
|
"
|
|
::= { hwSdhTributaryPerformCountEntry 1 }
|
|
|
|
hwSdhTriPerfLPFEESCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Path Far-end Errored Second.
|
|
"
|
|
::= { hwSdhTributaryPerformCountEntry 2 }
|
|
|
|
hwSdhTrapsVbOids OBJECT IDENTIFIER ::= { hwSdh 2 }
|
|
hwSdhTraps OBJECT IDENTIFIER ::= { hwSdh 3 }
|
|
hwSdhCommonTraps OBJECT IDENTIFIER ::= { hwSdhTraps 1 }
|
|
hwSdhAlarmTraps OBJECT IDENTIFIER ::= { hwSdhTraps 2}
|
|
hwSdhAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwSdhAlarmTraps 0}
|
|
|
|
hwSdhTributaryID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tributary ID.
|
|
"
|
|
::= { hwSdhTrapsVbOids 1 }
|
|
|
|
hwSdhSignalDegradeAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the signal degrades on the line connected to the STM port.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 1 }
|
|
|
|
hwSdhRemoteDefectTributaryAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwSdhTributaryID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the port receives the remote defect indication signal of
|
|
the tributary layer of the peer end.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 2 }
|
|
|
|
hwSdhAISAbnormalAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the AIS is abnormal on the line connected to the STM port.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 3 }
|
|
|
|
hwSdhRemoteDefectSignalAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the port receives the remote defect indication signal
|
|
of the line of the peer end.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 4 }
|
|
|
|
hwSDHLayerFrameLostAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the SDH layer frames of the port are lost.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 5 }
|
|
|
|
hwSDHPortFailReceiveSignalAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the port fails to receive signals.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 6 }
|
|
|
|
hwSDHAISTributaryLayerAbnormalAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwSdhTributaryID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the AIS of the tributary layer is abnormal.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 7 }
|
|
|
|
hwSDHFaultOccurrAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwSdhTributaryID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the a fault occurs between the peer end and its connected equipment.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 8 }
|
|
|
|
hwSDHConnectionFaultAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwSdhTributaryID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the connection fault occurs between the local device
|
|
and the peer end.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 9 }
|
|
|
|
hwSDHSignalDegradeRecoverAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the signal degradation recovers.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 10 }
|
|
|
|
hwSDHRecoverTributaryLayerAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwSdhTributaryID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the remote defect indication signal of the tributary
|
|
layer recovers from the abnormal state.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 11 }
|
|
|
|
hwSDHAISLineRecoversAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the AIS of the line recovers from the abnormal state.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 12 }
|
|
|
|
hwSDHLineRecoversSignalLineAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the remote defect indication signal of the line recovers
|
|
from the abnormal state.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 13 }
|
|
|
|
hwSDHFrameLossRecoverAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the frame loss recovers.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 14 }
|
|
|
|
hwSDHSignalReceiveFailureRecoverAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the port recovers from signal receiving failure.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 15 }
|
|
|
|
hwSDHAISTributaryRecoverAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwSdhTributaryID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the AIS of the tributary layer recovers from the abnormal state.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 16 }
|
|
|
|
hwSDHAISRecoverFromAbnormalAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwSdhTributaryID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the remote AIS recovers from the abnormal state.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 17 }
|
|
|
|
hwSDHRDIRecoverFromAbnormalAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwSdhTributaryID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap will send when the remote RDI recovers from the abnormal state.
|
|
"
|
|
::= { hwSdhAlarmTraps 0 18 }
|
|
|
|
END
|