-- ================================================================= -- Copyright (C) 2010 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: The mib is used for defining huawei's MSU SDH ports -- management MIB objects. -- Reference: -- Version: V1.13 -- ================================================================= HUAWEI-MSU-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64, Integer32, IpAddress, NOTIFICATION-TYPE FROM SNMPv2-SMI MacAddress,TEXTUAL-CONVENTION FROM SNMPv2-TC ifIndex FROM IF-MIB hwFrameIndex, hwSlotIndex, hwPortIndex FROM HUAWEI-DEVICE-MIB huaweiUtility FROM HUAWEI-MIB; hwSdh MODULE-IDENTITY LAST-UPDATED "201210190000Z" ORGANIZATION "Huawei Technologies co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "The mib is used for defining huawei's MSU SDH ports management MIB objects." -- Revision history REVISION "201210190000Z" DESCRIPTION "V1.13, changes in this revision: added leaf node hwSdhGroupOvhdRecvJ0CheckSwitch to indicate the check switch of SDH overhead command J0. added leaf node hwSdhGroupOvhdRecvJ1CheckSwitch to indicate the check switch of SDH overhead command J1. added leaf node hwSdhTriOvhdRecvJ2CheckSwitch to indicate the check switch of SDH overhead command J2. " REVISION "201011090900Z" DESCRIPTION "V1.12, modified the description of MIB. " REVISION "201010140900Z" DESCRIPTION "V1.11, add enumeration invalid(-1) for leaf hwSdhTrivc12RTPSwitch. " REVISION "201008230900Z" DESCRIPTION "V1.10, modified the description of mib. " REVISION "201004010900Z" DESCRIPTION "V1.09, changes in this revision: Modified the syntax error. " REVISION "201001120900Z" DESCRIPTION "V1.08, changes in this revision: Added the definition of the trap node, including: hwSdhSignalDegradeAlarmTrap hwSdhRemoteDefectTributaryAlarmTrap hwSdhAISAbnormalAlarmTrap hwSdhRemoteDefectSignalAlarmTrap hwSDHLayerFrameLostAlarmTrap hwSDHPortFailReceiveSignalAlarmTrap hwSDHAISTributaryLayerAbnormalAlarmTrap hwSDHFaultOccurrAlarmTrap hwSDHConnectionFaultAlarmTrap hwSDHSignalDegradeRecoverAlarmTrap hwSDHRecoverTributaryLayerAlarmTrap hwSDHAISLineRecoversAlarmTrap hwSDHLineRecoversSignalLineAlarmTrap hwSDHFrameLossRecoverAlarmTrap hwSDHSignalReceiveFailureRecoverAlarmTrap hwSDHAISTributaryRecoverAlarmTrap hwSDHAISRecoverFromAbnormalAlarmTrap hwSDHRDIRecoverFromAbnormalAlarmTrap " REVISION "201001070900Z" DESCRIPTION "V1.07, changes in this revision: Added leaf node hwSdhTrivc12RTPSwitch in table hwSdhTributaryTable for the MSU SDH tributary management. " REVISION "200903060900Z" DESCRIPTION "V1.05, changes in this revision: Imported type MacAddress and TEXTUAL-CONVENTION from SNMPv2-TC file. Modified the name of leaf node hwAlarmLevelTable to hwAlarmLevel. Added leaf nodes hwSdhTrivc12AlarmState, hwSdhTrivc12JitterBuffer. Anded hwSdhTrivc12ClockMode in table hwSdhTributaryTable for the MSU SDH tributary management. Added leaf nodes hwSdhInterfaceIP and hwSdhInterfaceMac in table hwSdhGroupTable for the MSU SDH group management. " REVISION "200810310900Z" DESCRIPTION "V1.03, changes in this revision: Imported new types Integer32 and Counter64 from SNMPv2-SMI file. Modified the name of object hwMsuMibObjects to hMibObjects. Modified the OID of hwSdhMibObjects to 1.3.6.1.4.1.2011.6.38.1. Added table hwSdhTributaryPerformCountTable for the vc12 tributaryperformance information management. Added table hwSdhGroupPerformCountTable for the STM-1 port performance information management. Modified the name of table hwMsuAlarmLevelTable to hwAlarmLevelTable. Modified the OID of table hwAlarmLevelTable to 1.3.6.1.4.1.2011.6.38.1.2. Modified the name of table hwMsuSdhTributaryTable to hwSdhTributaryTable. Modified the OID of table hwSdhTributaryTable to 1.3.6.1.4.1.2011.6.38.1.1. Added leaf nodes hwSdhTrivc12channlesstate and hwSdhTriPerfAdminStatus in table hwSdhTributaryTable for the MSU SDH tributary management. Modified the name of table hwMsuSdhGroupTable to hwSdhGroupTable. Modified the OID of table hwSdhGroupTable to hwAlarmLevelTable to 1.3.6.1.4.1.2011.6.38.1.0. Added leaf nodes hwSdhOpticPowerSDThreshold and hwSdhGroupPerfAdminStatus in table hwSdhGroupTable for the MSU SDH group management. " REVISION "200805290900Z" DESCRIPTION "V1.01, changes in this revision: Modified the description of all leaf nodes. " REVISION "200209020900Z" DESCRIPTION "V1.00, initial version." ::= { huaweiUtility 38 } hwSdhMibObjects OBJECT IDENTIFIER ::= { hwSdh 1 } hwSdhGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSdhGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for the MSU SDH group management, such as physical status of the MSU optical port. The index of this table is ifIndex. " ::= { hwSdhMibObjects 0 } hwSdhGroupEntry OBJECT-TYPE SYNTAX HwSdhGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for the MSU SDH group management, such as physical status of the MSU optical port. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwSdhGroupTable 1 } HwSdhGroupEntry ::= SEQUENCE { hwSdhInterfaceState INTEGER, hwSdhInterfaceLineState INTEGER, hwSdhInterfaceFiberType INTEGER, hwSdhInterfacePhyType INTEGER, hwSdhInterfaceLineType INTEGER, hwSdhInterfaceSpeed INTEGER, hwSdhInterfaceTxClock INTEGER, hwSdhGroupLoopType INTEGER, hwSdhTriNumberMode INTEGER, hwSdhGroupOvhdSendJ0Type INTEGER, hwSdhGroupOvhdSendJ0String OCTET STRING(SIZE(0..15)), hwSdhGroupOvhdRecvJ0Type INTEGER, hwSdhGroupOvhdRecvJ0String OCTET STRING(SIZE(0..15)), hwSdhGroupOvhdSendJ1Type INTEGER, hwSdhGroupOvhdSendJ1String OCTET STRING(SIZE(0..62)), hwSdhGroupOvhdRecvJ1Type INTEGER, hwSdhGroupOvhdRecvJ1String OCTET STRING(SIZE(0..62)), hwSdhGroupOvhdSendS1Value Integer32, hwSdhGroupOvhdSendC2Value Integer32, hwSdhGroupOvhdRecvedJ0Type INTEGER, hwSdhGroupOvhdRecvedJ0String OCTET STRING(SIZE(0..15)), hwSdhGroupOvhdRecvedJ1Type INTEGER, hwSdhGroupOvhdRecvedJ1String OCTET STRING(SIZE(0..62)), hwSdhGroupOvhdRecvedS1 Integer32, hwSdhGroupOvhdRecvedC2 Integer32, hwSdhGroupAlarmState Integer32, hwSdhOpticPowerSDThreshold INTEGER, hwSdhGroupPerfAdminStatus INTEGER, hwSdhInterfaceIP IpAddress, hwSdhInterfaceMac MacAddress, hwSdhGroupOvhdRecvJ0CheckSwitch INTEGER, hwSdhGroupOvhdRecvJ1CheckSwitch INTEGER } hwSdhInterfaceState OBJECT-TYPE SYNTAX INTEGER { normal(1), fault(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Physical status of the MSU optical port. Options: 1. normal(1) -physical status of the MSU optical port is normal 2. fault(2) -physical status of the MSU optical port is fault " ::= { hwSdhGroupEntry 1 } hwSdhInterfaceLineState OBJECT-TYPE SYNTAX INTEGER { signal(1), noSignal(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Working status of the line of the MSU optical port. Options: 1. signal(1) -working status of the line of the MSU optical port is signal 2. noSignal(2) -working status of the line of the MSU optical port is noSignal " ::= { hwSdhGroupEntry 2 } hwSdhInterfaceFiberType OBJECT-TYPE SYNTAX INTEGER { singleMode(1), multipleMode(2), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of the fiber connected to the MSU optical port. Options: 1. singleMode(1) -single-mode 2. multipleMode(2) -multi-mode 3. invalid(-1) -invalid value " ::= { hwSdhGroupEntry 3 } hwSdhInterfacePhyType OBJECT-TYPE SYNTAX INTEGER { optical(1), electric(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Physical type of the MSU port. Options: 1. optical(1) -physical type of the MSU port is optical 2. electric(2) -physical type of the MSU port is electric " ::= { hwSdhGroupEntry 4 } hwSdhInterfaceLineType OBJECT-TYPE SYNTAX INTEGER { stm1(1), stm4(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Line type of the MSU optical port. Options: 1. stm1(1) -line type of the MSU optical port is stm1 2. stm4(2) -line type of the MSU optical port is stm4 " ::= { hwSdhGroupEntry 5 } hwSdhInterfaceSpeed OBJECT-TYPE SYNTAX INTEGER { speed155(1), speed622(2), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of the MSU optical port. Options: 1. speed155(1) -rate of the MSU optical port is 155 Mbps 2. speed622(2) -rate of the MSU optical port is 622 Mbps 3. invalid(-1) -invalid value " ::= { hwSdhGroupEntry 6 } hwSdhInterfaceTxClock OBJECT-TYPE SYNTAX INTEGER { system(1), sdh(2), line0(3), line1(4), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Tx clock of the MSU optical port. Options: 1. system(1) -tx clock of the MSU optical port is system 2. sdh(2) -tx clock of the MSU optical port is sdh 3. line0(3) -tx clock of the MSU optical port is line0 4. line1(4) -tx clock of the MSU optical port is line1 5. invalid(-1) -invalid value " ::= { hwSdhGroupEntry 7 } hwSdhGroupLoopType OBJECT-TYPE SYNTAX INTEGER { noLoop(1), localLoop(2), remoteLoop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of the loopback test on the MSU optical port. Options: 1. noLoop(1) -no loopback 2. localLoop(2) -local loopback 3. remoteLoop(3) -remote loopback " ::= { hwSdhGroupEntry 8 } hwSdhTriNumberMode OBJECT-TYPE SYNTAX INTEGER { huawei(1), lucent(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SDH tributary numbering mode of the MSU optical port. Options: 1. huawei(1) -SDH tributary numbering mode of the MSU optical port is huawei 2. lucent(2) -SDH tributary numbering mode of the MSU optical port is lucent " ::= { hwSdhGroupEntry 9 } hwSdhGroupOvhdSendJ0Type OBJECT-TYPE SYNTAX INTEGER { short(1), long(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the sended MSU SDH overhead command J0. Options: 1. short(1) -type of the MSU SDH overhead command J0 is short 2. long(2) -type of the MSU SDH overhead command J0 is long 3. invalid(-1) -invalid value " ::= { hwSdhGroupEntry 10 } hwSdhGroupOvhdSendJ0String OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Send character string of the SDH overhead command J0. " ::= { hwSdhGroupEntry 11 } hwSdhGroupOvhdRecvJ0Type OBJECT-TYPE SYNTAX INTEGER { short(1), long(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the received MSU SDH overhead command J0. Options: 1. short(1) -type of the MSU SDH overhead command J0 is short 2. long(2) -type of the MSU SDH overhead command J0 is long 3. invalid(-1) -invalid value " ::= { hwSdhGroupEntry 12 } hwSdhGroupOvhdRecvJ0String OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Receive character string of the SDH overhead command J0. " ::= { hwSdhGroupEntry 13 } hwSdhGroupOvhdSendJ1Type OBJECT-TYPE SYNTAX INTEGER { short(1), long(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the sended MSU SDH overhead command word J1. Options: 1. short(1) -type of the MSU SDH overhead command word J1 is short 2. long(2) -type of the MSU SDH overhead command word J1 is long 3. invalid(-1) -invalid value " ::= { hwSdhGroupEntry 14 } hwSdhGroupOvhdSendJ1String OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..62)) MAX-ACCESS read-write STATUS current DESCRIPTION "Send character string of the SDH overhead command J1. " ::= { hwSdhGroupEntry 15 } hwSdhGroupOvhdRecvJ1Type OBJECT-TYPE SYNTAX INTEGER { short(1), long(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the received MSU SDH overhead command word J1. Options: 1. short(1) -type of the MSU SDH overhead command word J1 is short 2. long(2) -type of the MSU SDH overhead command word J1 is long 3. invalid(-1) -invalid value " ::= { hwSdhGroupEntry 16 } hwSdhGroupOvhdRecvJ1String OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..62)) MAX-ACCESS read-write STATUS current DESCRIPTION "Receive character string of the SDH overhead command J1. " ::= { hwSdhGroupEntry 17 } hwSdhGroupOvhdSendS1Value OBJECT-TYPE SYNTAX Integer32(0..255 | -1) MAX-ACCESS read-write STATUS current DESCRIPTION "Send value of SDH overhead command word S1. " ::= { hwSdhGroupEntry 18 } hwSdhGroupOvhdSendC2Value OBJECT-TYPE SYNTAX Integer32(0..255 | -1) MAX-ACCESS read-write STATUS current DESCRIPTION "Send value of the SDH overhead command word C2. " ::= { hwSdhGroupEntry 19 } hwSdhGroupOvhdRecvedJ0Type OBJECT-TYPE SYNTAX INTEGER { short(1), long(2), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the received MSU SDH overhead command word J0. Options: 1. short(1) -type of the MSU SDH overhead command word J0 is short 2. long(2) -type of the MSU SDH overhead command word J0 is long 3. invalid(-1) -invalid value " ::= { hwSdhGroupEntry 20 } hwSdhGroupOvhdRecvedJ0String OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "Receive character string of the SDH overhead command J0. " ::= { hwSdhGroupEntry 21 } hwSdhGroupOvhdRecvedJ1Type OBJECT-TYPE SYNTAX INTEGER { short(1), long(2), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the received MSU SDH overhead command word J1. Options: 1. short(1) -type of the MSU SDH overhead command word J1 is short 2. long(2) -type of the MSU SDH overhead command word J1 is long 3. invalid(-1) -invalid value " ::= { hwSdhGroupEntry 22 } hwSdhGroupOvhdRecvedJ1String OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..62)) MAX-ACCESS read-only STATUS current DESCRIPTION "Receive character string of the SDH overhead command J1. " ::= { hwSdhGroupEntry 23 } hwSdhGroupOvhdRecvedS1 OBJECT-TYPE SYNTAX Integer32(0..255 | -1) MAX-ACCESS read-only STATUS current DESCRIPTION "Receive value of the SDH overhead command word S1. " ::= { hwSdhGroupEntry 24 } hwSdhGroupOvhdRecvedC2 OBJECT-TYPE SYNTAX Integer32(0..255 | -1) MAX-ACCESS read-only STATUS current DESCRIPTION "Receive value of the SDH overhead command word C2. " ::= { hwSdhGroupEntry 25 } hwSdhGroupAlarmState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the SDH group alarm state, per bit indicates one kind of alarm, 1 means exist 0 means not exist. 0xFFFFFFFF,means invalid value bit0 =RLOS receive loss of signal alarm exist bit1 =ROOF receive overlap of frame alarm exist bit2 =RLOF receiver loss of frame alarm exist bit3 =B1-OVER Errored Code over Threshold in Regenerator Section alarm bit4 =MS-AIS Alarm Indication Signal in Multiplex Section bit5 =MS-RDI Remote Defect Indication in Multiplex Section bit6 =B2-OVER Errored Code over Threshold in Multiplex Section bit7 =B2-SD Signal Degrade in Multiplex Section bit8 =MS-REI Remote Error Indication in Multiplex Section bit9 =J0MM Trace Identifier Mismatch in Regenerator Section bit10=B1-SD Signal Degrade in Regenerator Section alarm bit11=B1-BOVER Errored Code Block over Threshold in Regenerator Section alarm bit12=TLOS send loss of signal alarm exist bit13=AULOP Loss of Pointer in Administrative Unit bit14=B3-SD Signal Degrade in Higher order Path bit15=B3-OVER Errored Code over Threshold in Higher order Path bit16=HP-TIM Trace Identifier Mismatch in Higher order Path bit17=HP-SLM PayLoad Mismatch in Higher order Path bit18=HP-RDI Remote Defect Indication in Higher order Path bit19=AU-AIS Alarm Indication Signal in Administrative Unit bit20=LOM Loss of Multiframe bit21=HP-UNEQ Higher order Path UnEquipped bit22=HP-REI Higher order Path Remote Error Indication others, no used, reserve to 0 " ::= { hwSdhGroupEntry 26 } hwSdhOpticPowerSDThreshold OBJECT-TYPE SYNTAX INTEGER { eminus5(5), eminus6(6), eminus7(7), eminus8(8), eminus9(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "The level of threshold for sd of optic port. Options: 1. eminus5(5) -1.0e-5(5) 2. eminus6(6) -1.0e-6(6) 3. eminus7(7) -1.0e-7(7) 4. eminus8(8) -1.0e-8(8) 5. eminus9(9) -1.0e-9(9) " ::= { hwSdhGroupEntry 27 } hwSdhGroupPerfAdminStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The operation of the performance on the port. Options: 1. reset(1) -the operation of the performance on the port is reset 2. invalid(-1) -invalid value " ::= { hwSdhGroupEntry 28 } hwSdhInterfaceIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of STM-1 port. " ::= { hwSdhGroupEntry 29 } hwSdhInterfaceMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Mac address of STM-1 port. " ::= { hwSdhGroupEntry 30 } hwSdhGroupOvhdRecvJ0CheckSwitch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the check switch of SDH overhead command J0. Options: 1. enable(1) -indicates that SDH overhead command J0 to be checked. 2. disable(2) -indicates that SDH overhead command J0 not to be checked. Default: enable(1) " DEFVAL { enable } ::= { hwSdhGroupEntry 31 } hwSdhGroupOvhdRecvJ1CheckSwitch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the check switch of SDH overhead command J1. Options: 1. enable(1) -indicates that SDH overhead command J1 to be checked. 2. disable(2) -indicates that SDH overhead command J1 not to be checked. Default: enable(1) " DEFVAL { enable } ::= { hwSdhGroupEntry 32 } hwSdhTributaryTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSdhTributaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for the MSU SDH tributary management, such as type of the loopback test on the MSU SDH tributary. The index of this table is ifIndex. " ::= { hwSdhMibObjects 1 } hwSdhTributaryEntry OBJECT-TYPE SYNTAX HwSdhTributaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for the MSU SDH tributary management, such as type of the loopback test on the MSU SDH tributary. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwSdhTributaryTable 1 } HwSdhTributaryEntry ::= SEQUENCE { hwSdhTriLoopType INTEGER, hwSdhTriOvhdSendJ2String OCTET STRING(SIZE(0..15)), hwSdhTriOvhdRecvJ2String OCTET STRING(SIZE(0..15)), hwSdhTriOvhdSendV5Value Integer32, hwSdhTriOvhdRecvedJ2 OCTET STRING(SIZE(0..15)), hwSdhTriOvhdRecvedV5 Integer32, hwSdhTriAlarmState Integer32, hwSdhTrivc12channlesstate INTEGER, hwSdhTriPerfAdminStatus INTEGER, hwSdhTrivc12AlarmState Integer32, hwSdhTrivc12JitterBuffer Integer32, hwSdhTrivc12ClockMode INTEGER, hwSdhTrivc12RTPSwitch INTEGER, hwSdhTriOvhdRecvJ2CheckSwitch INTEGER } hwSdhTriLoopType OBJECT-TYPE SYNTAX INTEGER { noLoop(1), localLoop(2), remoteLoop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of the loopback test on the MSU SDH tributary. Options: 1. noLoop(1) -no loopback 2. localLoop(2) -local loopback 3. remoteLoop(3) -remote loopback " ::= { hwSdhTributaryEntry 1 } hwSdhTriOvhdSendJ2String OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Send character string of the SDH overhead command J2. " ::= { hwSdhTributaryEntry 2 } hwSdhTriOvhdRecvJ2String OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Receive character string of the SDH overhead command J2. " ::= { hwSdhTributaryEntry 3 } hwSdhTriOvhdSendV5Value OBJECT-TYPE SYNTAX Integer32(0..255 | -1) MAX-ACCESS read-write STATUS current DESCRIPTION "Send value of SDH overhead command word V5. " ::= { hwSdhTributaryEntry 4 } hwSdhTriOvhdRecvedJ2 OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "Receive character string of the SDH overhead command J2. " ::= { hwSdhTributaryEntry 5 } hwSdhTriOvhdRecvedV5 OBJECT-TYPE SYNTAX Integer32(0..255 | -1) MAX-ACCESS read-only STATUS current DESCRIPTION "Receive value of the SDH overhead command word V5. " ::= { hwSdhTributaryEntry 6 } hwSdhTriAlarmState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SDH tributary unit alarm state, per bit indicates one kind of alarm, 1 means exist; 0 means not exist. 0xFFFFFFFF,means invalid value bit0 = TU-AIS Alarm Indication Signal in Tributary Unit bit1 = TU-LOP Loss of pointer in tributary unit bit2 = LP-UNEQ Lower order Path UnEquipped bit3 = LP-SLM PayLoad Mismatch in Lower order Path bit4 = LP-TIM Trace Identifier Mismatch in Lower order Path bit5 = LP-RFI Remote Failure Indication in Lower order Path bit6 = LP-RDI Remote Defect Indication in Lower order Path bit7 = SIZZEERR Pointer Size Error in Lower order Path others, no used, reserve to 0 " ::= { hwSdhTributaryEntry 7 } hwSdhTrivc12channlesstate OBJECT-TYPE SYNTAX INTEGER { distributed(1), nondistributive(2), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The SDH tributary unit path state. Options: 1. distributed(1) -the SDH tributary unit path state is distributed 2. nondistributive(2) -the SDH tributary unit path state is nondistributive 3. invalid(-1) -invalid value " ::= { hwSdhTributaryEntry 8 } hwSdhTriPerfAdminStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The operation of the performance on the port. Options: 1. reset(1) -the operation of the performance on the port is reset 2. invalid(-1) -invalid value " ::= { hwSdhTributaryEntry 9 } hwSdhTrivc12AlarmState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SDH tributary unit alarm state, per bit indicates one kind of alarm, 1 means exist 0 means not exist. 0xFFFFFFFF,means invalid value bit0 = AIS Remote Alarm Indication Signal in Tributary Unit bit1 = RDI Remote Defect Indication in tributary unit others, no used, reserve to 0 " ::= { hwSdhTributaryEntry 10} hwSdhTrivc12JitterBuffer OBJECT-TYPE SYNTAX Integer32 (500..8000 | -1) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of JitterBuffer, must be multiple of 125. Unit: us " ::= { hwSdhTributaryEntry 11} hwSdhTrivc12ClockMode OBJECT-TYPE SYNTAX INTEGER { system(1), line(2), recovery(3), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of clock mode. Options: 1. system(1) -system clock 2. line(2) -line clock 3. recovery(3) -recovery clock 4. invalid(-1) -invalid value " ::= { hwSdhTributaryEntry 12} hwSdhTrivc12RTPSwitch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of RTP switch. Options: 1. enable(1) -status of RTP switch is enable 2. disable(2) -status of RTP switch is disable 3. invalid(-1) -invalid value Default: enable(1) " DEFVAL {enable} ::= { hwSdhTributaryEntry 13} hwSdhTriOvhdRecvJ2CheckSwitch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the check switch of SDH overhead command J2. Options: 1. enable(1) -indicates that SDH overhead command J2 to be checked. 2. disable(2) -indicates that SDH overhead command J2 not to be checked. Default: enable(1) " DEFVAL { enable } ::= { hwSdhTributaryEntry 14 } hwAlarmLevelTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAlarmLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for the MSU alarm level management, such as the alarm level of MSU. The indexes of this table are hwFrameIndex, hwSlotIndex. " ::= { hwSdhMibObjects 2 } hwAlarmLevelEntry OBJECT-TYPE SYNTAX HwAlarmLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for the MSU alarm level management, such as the alarm level of MSU. The indexes of this entry are hwFrameIndex, hwSlotIndex. " INDEX { hwFrameIndex, hwSlotIndex } ::= { hwAlarmLevelTable 1 } HwAlarmLevelEntry ::= SEQUENCE { hwSdhAlarmLevel INTEGER } hwSdhAlarmLevel OBJECT-TYPE SYNTAX INTEGER { critical(1), major(2), minor(3), warning(4), disable(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The alarm level of MSU. Options: 1. critical(1) -critical alarm can be reported 2. major(2) -major or critical alarm can be reported 3. minor(3) -minor or major or critical alarm can be reported 4. warning(4) -all alarm can be reported 5. disable(5) -all alarm disable be reported " ::= { hwAlarmLevelEntry 1 } hwSdhGroupPerformCountTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSdhGroupPerformCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for the STM-1 port performance information management. The index of this table is ifIndex. " ::= { hwSdhMibObjects 3 } hwSdhGroupPerformCountEntry OBJECT-TYPE SYNTAX HwSdhGroupPerformCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for the STM-1 port performance information management. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwSdhGroupPerformCountTable 1 } HwSdhGroupPerformCountEntry ::= SEQUENCE { hwSdhGroupPerfOOFCount Counter64, hwSdhGroupPerfB1CNTCount Counter64, hwSdhGroupPerfB1BCNTCount Counter64, hwSdhGroupPerfB2CNTCount Counter64, hwSdhGroupPerfLFEBECount Counter64, hwSdhGroupPerfPPJECount Counter64, hwSdhGroupPerfNPJECount Counter64, hwSdhGroupPerfNDFCount Counter64, hwSdhGroupPerfRSESCount Counter64, hwSdhGroupPerfMSESCount Counter64, hwSdhGroupPerfMSFEESCount Counter64, hwSdhGroupPerfHPESCount Counter64, hwSdhGroupPerfHPFEESCount Counter64, hwSdhGroupPerfB3CNTCount Counter64, hwSdhGroupPerfPFEBECount Counter64 } hwSdhGroupPerfOOFCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of out of frame. " ::= { hwSdhGroupPerformCountEntry 1 } hwSdhGroupPerfB1CNTCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bit Error number of B1. " ::= { hwSdhGroupPerformCountEntry 2 } hwSdhGroupPerfB1BCNTCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Block Error number of B1. " ::= { hwSdhGroupPerformCountEntry 3 } hwSdhGroupPerfB2CNTCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bit Error number of B2. " ::= { hwSdhGroupPerformCountEntry 4 } hwSdhGroupPerfLFEBECount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far-end Bit Errorred number. " ::= { hwSdhGroupPerformCountEntry 5 } hwSdhGroupPerfPPJECount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Positive justification event of AU pointer. " ::= { hwSdhGroupPerformCountEntry 6 } hwSdhGroupPerfNPJECount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Negative justification event of AU pointer. " ::= { hwSdhGroupPerformCountEntry 7 } hwSdhGroupPerfNDFCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "New data flag of AU pointer. " ::= { hwSdhGroupPerformCountEntry 8 } hwSdhGroupPerfRSESCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section Errorred Second. " ::= { hwSdhGroupPerformCountEntry 9 } hwSdhGroupPerfMSESCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Errorred Second. " ::= { hwSdhGroupPerformCountEntry 10 } hwSdhGroupPerfMSFEESCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far-end Errorred Second. " ::= { hwSdhGroupPerformCountEntry 11 } hwSdhGroupPerfHPESCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher Path Errorred Second. " ::= { hwSdhGroupPerformCountEntry 12 } hwSdhGroupPerfHPFEESCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher Path Far-End Errorred Second. " ::= { hwSdhGroupPerformCountEntry 13 } hwSdhGroupPerfB3CNTCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bit Error number of B3. " ::= { hwSdhGroupPerformCountEntry 14 } hwSdhGroupPerfPFEBECount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Path Far-end bit error number. " ::= { hwSdhGroupPerformCountEntry 15 } hwSdhTributaryPerformCountTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSdhTributaryPerformCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for the vc12 tributary performance information management. The index of this table is ifIndex. " ::= { hwSdhMibObjects 4 } hwSdhTributaryPerformCountEntry OBJECT-TYPE SYNTAX HwSdhTributaryPerformCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for the vc12 tributary performance information management. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwSdhTributaryPerformCountTable 1 } HwSdhTributaryPerformCountEntry ::= SEQUENCE { hwSdhTriPerfLPESCount Counter64, hwSdhTriPerfLPFEESCount Counter64 } hwSdhTriPerfLPESCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Low Path Errored Second. " ::= { hwSdhTributaryPerformCountEntry 1 } hwSdhTriPerfLPFEESCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Low Path Far-end Errored Second. " ::= { hwSdhTributaryPerformCountEntry 2 } hwSdhTrapsVbOids OBJECT IDENTIFIER ::= { hwSdh 2 } hwSdhTraps OBJECT IDENTIFIER ::= { hwSdh 3 } hwSdhCommonTraps OBJECT IDENTIFIER ::= { hwSdhTraps 1 } hwSdhAlarmTraps OBJECT IDENTIFIER ::= { hwSdhTraps 2} hwSdhAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwSdhAlarmTraps 0} hwSdhTributaryID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Tributary ID. " ::= { hwSdhTrapsVbOids 1 } hwSdhSignalDegradeAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap will send when the signal degrades on the line connected to the STM port. " ::= { hwSdhAlarmTraps 0 1 } hwSdhRemoteDefectTributaryAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwSdhTributaryID } STATUS current DESCRIPTION "This trap will send when the port receives the remote defect indication signal of the tributary layer of the peer end. " ::= { hwSdhAlarmTraps 0 2 } hwSdhAISAbnormalAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap will send when the AIS is abnormal on the line connected to the STM port. " ::= { hwSdhAlarmTraps 0 3 } hwSdhRemoteDefectSignalAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap will send when the port receives the remote defect indication signal of the line of the peer end. " ::= { hwSdhAlarmTraps 0 4 } hwSDHLayerFrameLostAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap will send when the SDH layer frames of the port are lost. " ::= { hwSdhAlarmTraps 0 5 } hwSDHPortFailReceiveSignalAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap will send when the port fails to receive signals. " ::= { hwSdhAlarmTraps 0 6 } hwSDHAISTributaryLayerAbnormalAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwSdhTributaryID } STATUS current DESCRIPTION "This trap will send when the AIS of the tributary layer is abnormal. " ::= { hwSdhAlarmTraps 0 7 } hwSDHFaultOccurrAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwSdhTributaryID } STATUS current DESCRIPTION "This trap will send when the a fault occurs between the peer end and its connected equipment. " ::= { hwSdhAlarmTraps 0 8 } hwSDHConnectionFaultAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwSdhTributaryID } STATUS current DESCRIPTION "This trap will send when the connection fault occurs between the local device and the peer end. " ::= { hwSdhAlarmTraps 0 9 } hwSDHSignalDegradeRecoverAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap will send when the signal degradation recovers. " ::= { hwSdhAlarmTraps 0 10 } hwSDHRecoverTributaryLayerAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwSdhTributaryID } STATUS current DESCRIPTION "This trap will send when the remote defect indication signal of the tributary layer recovers from the abnormal state. " ::= { hwSdhAlarmTraps 0 11 } hwSDHAISLineRecoversAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap will send when the AIS of the line recovers from the abnormal state. " ::= { hwSdhAlarmTraps 0 12 } hwSDHLineRecoversSignalLineAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap will send when the remote defect indication signal of the line recovers from the abnormal state. " ::= { hwSdhAlarmTraps 0 13 } hwSDHFrameLossRecoverAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap will send when the frame loss recovers. " ::= { hwSdhAlarmTraps 0 14 } hwSDHSignalReceiveFailureRecoverAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap will send when the port recovers from signal receiving failure. " ::= { hwSdhAlarmTraps 0 15 } hwSDHAISTributaryRecoverAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwSdhTributaryID } STATUS current DESCRIPTION "This trap will send when the AIS of the tributary layer recovers from the abnormal state. " ::= { hwSdhAlarmTraps 0 16 } hwSDHAISRecoverFromAbnormalAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwSdhTributaryID } STATUS current DESCRIPTION "This trap will send when the remote AIS recovers from the abnormal state. " ::= { hwSdhAlarmTraps 0 17 } hwSDHRDIRecoverFromAbnormalAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwSdhTributaryID } STATUS current DESCRIPTION "This trap will send when the remote RDI recovers from the abnormal state. " ::= { hwSdhAlarmTraps 0 18 } END