WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/huawei/HUAWEI-DSLAM-PITP-MIB

2908 lines
130 KiB
Plaintext
Raw Permalink Blame History

-- =============================================================================================================
-- Copyright (C) 2019 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: This MIB module defines Huawei's Policy Information Transfer Protocol (PITP) MIB objects.
-- PITP is a member of the Huawei Group Management Protocol (HGMP) family, and provides the Broadband
-- Remote Access Server (BRAS) with the information about the port of access users. PITP binds user
-- accounts to the access ports together to prevent theft and roaming of user accounts.
-- Reference:
-- Version: V1.64
-- ==============================================================================================================
HUAWEI-DSLAM-PITP-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwFrameIndex, hwSlotIndex, hwPortIndex
FROM HUAWEI-DEVICE-MIB
huaweiUtility
FROM HUAWEI-MIB
ifIndex
FROM IF-MIB
Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, Integer32, Counter64, NOTIFICATION-TYPE
FROM SNMPv2-SMI
TruthValue, RowStatus, DisplayString, DateAndTime
FROM SNMPv2-TC;
hwPITP MODULE-IDENTITY
LAST-UPDATED "201901090000Z"
ORGANIZATION "Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"This MIB module defines Huawei's Policy Information Transfer Protocol (PITP) MIB objects.
PITP is a member of the Huawei Group Management Protocol (HGMP) family, and provides the Broadband
Remote Access Server (BRAS) with the information about the port of access users. PITP binds user
accounts to the access ports together to prevent theft and roaming of user accounts."
-- Revision history
REVISION "201901090000Z"
DESCRIPTION "V1.64, modified the description of hwDslamAccessUserAbnormalMonitorCurrentRecordEntry.
"
REVISION "201811160000Z"
DESCRIPTION "V1.63, modified the description of hwDslamRaioSuboptionIndex.
"
REVISION "201807130000Z"
DESCRIPTION "V1.62, added hwDslamRaioAncpAggCidFormatTable
and hwDslamRaioAncpAggCidFormatEntry,hwDslamRaioAncpAggCidFormatType,hwDslamRaioAncpAggCidFormatIfType,hwDslamNewRaioAncpAggCidFormatString.
"
REVISION "201803210000Z"
DESCRIPTION "V1.61, modified the description of hwDslamAccessUserAbnormalMonitorLastRecordTable
and hwDslamAccessUserAbnormalMonitorCurrentRecordTable.
"
REVISION "201710200000Z"
DESCRIPTION "V1.60, added hwDslamAccessUserAbnormalMonitorPppoeSwitch, hwDslamAccessUserAbnormalMonitorDhcpv4Switch, hwDslamAccessUserAbnormalMonitorNotifySwitch,
hwDslamAccessUserAbnormalMonitorThreshold, hwDslamAccessUserAbnormalMonitorActiveThreshold, hwDslamAccessUserAbnormalMonitorPeriod,
hwDslamAccessUserAbnormalMonitorLastRecordTable, hwDslamAccessUserAbnormalMonitorCurrentRecordTable, hwDslamAccessUserAbnormalMonitorDialupNumber,
hwDslamAccessUserAbnormalMonitorDialupAbnormalNumber, hwDslamAccessUserAbnormalMonitorRecordTrap and hwDslamAccessUserAbnormalMonitorRecordRestoreTrap.
"
REVISION "201706080000Z"
DESCRIPTION "V1.59, added hwDslamRaioSuboptionValueIftype.
Modified the description of hwDslamRaioProtocolTypeIndex.
"
REVISION "201705120000Z"
DESCRIPTION "V1.58, added hwDslamPppoeEchoUpportMonitorNotifySwitch, hwDslamPppoeEchoUpportMonitorActiveThreshold, hwDslamPppoeEchoUpportMonitorStartTime,
hwDslamPppoeEchoUpportMonitorEndTime, hwDslamPppoeEchoUpportMonitorPppoeEchoRequestLastCount, hwDslamPppoeEchoUpportMonitorPppoeEchoReplyLastCount
and hwDslamPppoeEchoUpportMonitorPeakRecordTable.
Modified the default value of hwDslamPppoeEchoUpportMonitorSwitch.
Modified the description of hwDslamPppoeEchoUpportMonitorPppoeEchoRequestCount, hwDslamPppoeEchoUpportMonitorPppoeEchoReplyCount, hwDslamPppoeEchoUpportMonitorPppoeEchoPreviousCount, hwDslamPppoeEchoUpportMonitorPppoeEchoCurrentCount and hwDslamPppoeEchoUpportMonitorRecordTrap.
"
REVISION "201703290000Z"
DESCRIPTION "V1.57, modified the description of hwDslamPppoeEchoUpportMonitorPppoeEchoPreviousCount and hwDslamPppoeEchoUpportMonitorPppoeEchoCurrentCount."
REVISION "201703070000Z"
DESCRIPTION "V1.56, added hwDslamPppoeEchoUpportMonitor, hwDslamPppoeEchoUpportMonitorSwitch, hwDslamPppoeEchoUpportMonitorPeriod, hwDslamPppoeEchoUpportMonitorThreshold, hwDslamPppoeEchoUpportMonitorMemberTable, hwDslamPppoeEchoUpportMonitorRecordTable, hwPITPTraps.
"
REVISION "201609120000Z"
DESCRIPTION "V1.55, added skb to hwDslamPITPRAIOMode, hwDslamDHCPOPTION82RAIOMode, hwDslamRAIOMode, hwDslamAncpRAIOMode, hwDslamDHCPv6OPTIONRAIOMode, hwDslamRaioProfilePitpRaioMode, hwDslamRaioProfileDhcpOption82RaioMode, hwDslamRaioProfileAncpRaioMode, hwDslamRaioProfileDhcpv6OptionRaioMode, hwDslamRaioProfileRadiusNasPortIdRaioMode and hwDslamRadiusNasPortIdRAIOMode.
"
REVISION "201607070000Z"
DESCRIPTION "V1.54, added hwDslamRaioSuboptionValueTable.added hwDslamRaioSuboptionValueIndex.added hwDslamRaioSuboptionValue.
"
REVISION "201601200000Z"
DESCRIPTION "V1.53, added hwDslamRaioSuboptionFastReport.
"
REVISION "201506010000Z"
DESCRIPTION "V1.52, added radiusNasPortId(5) to hwDslamRAIOObject.
Added hwDslamRadiusNasPortIdRAIOMode and hwDslamRaioProfileRadiusNasPortIdRaioMode.
"
REVISION "201503110000Z"
DESCRIPTION "V1.51, deleted the table of hwDslamPITPPmodePortPvcTable."
REVISION "201502020000Z"
DESCRIPTION "V1.50, modified the description of hwDslamRaioProtocolTypeIndex.
"
REVISION "201412270000Z"
DESCRIPTION "V1.49, added hwDslamRaioSuboptionActualDataRateType."
REVISION "201409010000Z"
DESCRIPTION "V1.48, modified the revision log of version 1.47.
"
REVISION "201408150000Z"
DESCRIPTION "V1.47, modified the attributes of hwDslamPppoeFlowStatisticsRowStatus.
"
REVISION "201406100000Z"
DESCRIPTION "V1.46, modified the enumerate of hwDslamPITPTransparentUserVlanType,
modified hwDslamPITP to hwPITP.
"
REVISION "201401170000Z"
DESCRIPTION "V1.45, added true(17) to hwDslamRaioProfilePitpRaioMode, hwDslamRaioProfileDhcpOption82RaioMode,
hwDslamRaioProfileAncpRaioMode and hwDslamRaioProfileDhcpv6OptionRaioMode.
"
REVISION "201401100000Z"
DESCRIPTION "V1.44, added hwDslamPITPTransparentUserVlanType and hwDslamPITPTransparentSingleUserVlanList."
REVISION "201312200000Z"
DESCRIPTION "V1.43, modified the description of hwDslamRAIOAncpAggCidFormatString."
REVISION "201310230000Z"
DESCRIPTION "V1.42, added true(17) to hwDslamPITPRAIOMode, hwDslamDHCPOPTION82RAIOMode, hwDslamRAIOMode, hwDslamAncpRAIOMode, hwDslamDHCPv6OPTIONRAIOMode."
REVISION "201309110000Z"
DESCRIPTION "V1.41, added hwDslamRaioDHCPv6Option17CableLabsSubSuboptionTable."
REVISION "201307300000Z"
DESCRIPTION "V1.40, added hwDslamRAIOAncpAggCidFormatString."
REVISION "201305130000Z"
DESCRIPTION "V1.39, added hwDslamRaioCableLabsSuboptionTable."
REVISION "201301100000Z"
DESCRIPTION "V1.38, The number of dashes used form comments was changed to two."
REVISION "201211070000Z"
DESCRIPTION "V1.37, modified description of hwDslamRAIORowStatus."
REVISION "201205120000Z"
DESCRIPTION "V1.36, added docsis(5) to hwDslamRAIOIfType."
REVISION "201203140000Z"
DESCRIPTION "V1.35, modified the value range of hwDslamPppoeFlowStatisticsIndex."
REVISION "201112290000Z"
DESCRIPTION "V1.34, added hwDslamPppoeReverse."
REVISION "201109270000Z"
DESCRIPTION "V1.33, added vnpt(16) to hwDslamDHCPv6OPTIONRAIOMode,hwDslamRaioProfilePitpRaioMode,
hwDslamRaioProfileDhcpOption82RaioMode,hwDslamRaioProfileAncpRaioMode,hwDslamRaioProfileDhcpv6OptionRaioMode.
"
REVISION "201108120000Z"
DESCRIPTION "V1.32, added vnpt(16) to hwDslamPITPRAIOMode,hwDslamDHCPOPTION82RAIOMode,hwDslamAncpRAIOMode and hwDslamRAIOMode.
Modified the indication of hwDslamDHCPOPTION82RAIOMode,hwDslamAncpRAIOMode,hwDslamRaioProfileDhcpOption82RaioMode,
hwDslamRaioProfileAncpRaioMode and hwDslamRaioProfileDhcpv6OptionRaioMode.
"
REVISION "201107290000Z"
DESCRIPTION "V1.31, modified the description."
REVISION "201102130000Z"
DESCRIPTION "V1.30, added hwDslamPppoeFlowStatisticsTable.
"
REVISION "201101250000Z"
DESCRIPTION "V1.29, changed hwDslamRaioProfileAccessNodeIp to hwDslamRaioProfileAccessNodeIpIfType
and hwDslamRaioProfileAccessNodeIpIfNumber. Moved hwDslamRaioProfileAccessNodeId to a
new position.
"
REVISION "201012150000Z"
DESCRIPTION "V1.28, added hwDslamRaioProfileTable, hwDslamRaioProfileSuboptionTable
and hwDslamRaioProfileFormatTable.
"
REVISION "201011260000Z"
DESCRIPTION "V1.27, added dhcpv6Option(4) to hwDslamRAIOObject.
Added hwDslamDHCPv6OPTIONRAIOMode and hwDslamRAIODhcpv6Option37EnterpriseNumber.
"
REVISION "201011170000Z"
DESCRIPTION "V1.26, modified description of all leaves. Modified the value range of hwDslamRAIOIfType."
REVISION "201011110000Z"
DESCRIPTION "V1.25, added bbf(15) to hwDslamPITPRAIOMode,hwDslamDHCPOPTION82RAIOMode,hwDslamAncpRAIOMode and hwDslamRAIOMode.
Added forwardPmode(4) and rebuildPmode(5) to hwDslamPITPStatus.
"
REVISION "201011090000Z"
DESCRIPTION "V1.24, modified the description."
REVISION "201010110000Z"
DESCRIPTION "V1.23, modified the description."
REVISION "201007100000Z"
DESCRIPTION "V1.22, modified the description of hwDslamAccessNodeId and hwDslamAccessNodeIp.
Modified the description of all enumerate values.
"
REVISION "201004250000Z"
DESCRIPTION "V1.21, modified description of all leaves."
REVISION "201003110000Z"
DESCRIPTION "V1.20, modified enumeration format."
REVISION "200910280000Z"
DESCRIPTION "V1.16, added tm(14) to hwDslamPITPRAIOMode,hwDslamDHCPOPTION82RAIOMode and hwDslamRAIOMode."
REVISION "200909100000Z"
DESCRIPTION "V1.15, added cntelXpon to hwDslamPITPRAIOMode."
REVISION "200407280900Z"
DESCRIPTION "V1.00, initial version."
::= { huaweiUtility 42 }
hwDslamPITPStatus OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enableVmode(2),
enablePmode(3),
forwardPmode(4),
rebuildPmode(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of the global PITP switch.
Options:
1. disable(1) -indicates the global PITP switch is off
2. enableVmode(2) -indicates the global PITP switch is V mode
3. enablePmode(3) -indicates the global PITP switch is P mode
4. forwardPmode(4) -indicates not processing the vendor tag of the packet, but transparent it transmitted. Only for P mode
5. rebuildPmode(5) -indicates rebuild the vendor tag from the ONU device, to meet the TR-156 needs, only for P mode
Default: disable(1)
"
::= { hwPITP 1 }
hwDslamPITPVmodeEtherType OBJECT-TYPE
SYNTAX Unsigned32 (1536..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Ethernet protocol type of the PITP VBAS.
Range: 1536-65535, that is, 0x600-0xFFFF
Default: 33280(0x8200)
Restrictions: If the value set to a protocol type is the same as any of other protocol types in the system,
the setting fails.
"
::= { hwPITP 2 }
hwDslamPITPXdslPortRateInfoSwitch OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Xdsl port rate information switch, current support Adsl only.
Options:
1. disable(1) -indicates the Xdsl port rate information switch is off
2. enable(2) -indicates Xdsl port rate information switch is on
Default: disable(1)
"
::= { hwPITP 3}
hwDslamPITPCNTelSwitch OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Xdsl add BRAS information switch.
Options:
1. disable(1) -indicates the Xdsl add BRAS information switch is off
2. enable(2) -indicates Xdsl add BRAS information switch is on
Default: disable(1)
"
::= { hwPITP 4}
hwDslamPITPTITagSwitch OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TI Add Dhcp && PITP Tag information switch
Options:
1. disable(1) -indicates the TI Add Dhcp && PITP Tag information switch is off
2. enable(2) -indicates the TI Add Dhcp && PITP Tag information switch is on
Default: disable(1)
"
::= { hwPITP 5}
hwDslamPITPRAIOMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
servicePortUserLabel(8),
dslForumDefault(9),
brt(10),
userDefined(11),
ft(12),
cntelXpon(13),
tm(14),
bbf(15),
vnpt(16),
true(17),
skb(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the RAIO mode of PPPoE plus/VBAS.
Options:
1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common
2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf
6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel
7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of PPPoE plus/VBAS is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of PPPoE plus/VBAS is dslForumDefault
10. brt(10) -indicates the RAIO mode of PPPoE plus/VBAS is brt
11. userDefined(11) -indicates the RAIO mode of PPPoE plus/VBAS is user defined
12. ft(12) -indicates the RAIO mode of PPPoE plus/VBAS is ft
13. cntelXpon(13) -indicates the RAIO mode of PPPoE plus/VBAS is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of PPPoE plus/VBAS is tm
15. bbf(15) -indicates the RAIO mode of PPPoE plus is bbf
16. vnpt(16) -indicates the RAIO mode of PPPoE plus is vnpt
17. true(17) -indicates the RAIO mode of PPPoE plus is true
18. skb(18) -indicates the RAIO mode of PPPoE plus is skb
Default: common(1)
Restrictions:
bt(7) and skb(18) are not supported.
The VBAS supports only common(1), cntel(3), and userDefined(11).
When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable.
"
::= { hwPITP 6}
hwDslamPITPPMODERAIOMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
bbf(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RAIO(Relay agent info Option) mode of PITP pmode.
Options:
1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common
2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf
6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel
7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt
8. bbf(15) -indicates the RAIO mode of PPPoE plus is bbf
Default: common(1)
"
::= { hwPITP 7}
hwDslamPITPVMODERAIOMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
cntel(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RAIO(Relay agent info Option) mode of PITP vmode.
Options:
1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common
2. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS
Default: common(1)
"
::= { hwPITP 8}
hwDslamDHCPOPTION82RAIOMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
servicePortUserLabel(8),
dslForumDefault(9),
brt(10),
userDefined(11),
ft(12),
cntelXpon(13),
tm(14),
bbf(15),
vnpt(16),
true(17),
skb(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the RAIO mode of DHCP Option82.
Options:
1. common(1) -indicates the RAIO mode of DHCP Option82 is common
2. xdslPortRate(2) -indicates the RAIO mode of DHCP Option82 is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of DHCP Option82 is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of DHCP Option82 is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of DHCP Option82 is neuf
6. portUserLabel(6) -indicates the RAIO mode of DHCP Option82 is portUserLabel
7. bt(7) -indicates the RAIO mode of DHCP Option82 is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of DHCP Option82 is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of DHCP Option82 is dslForumDefault
10. brt(10) -indicates the RAIO mode of DHCP Option82 is brt
11. userDefined(11) -indicates the RAIO mode of DHCP Option82 is user defined
12. ft(12) -indicates the RAIO mode of DHCP Option82 is ft
13. cntelXpon(13) -indicates the RAIO mode of DHCP Option82 is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of DHCP Option82 is tm
15. bbf(15) -indicates the RAIO mode of DHCP Option82 is bbf
16. vnpt(16) -indicates the RAIO mode of DHCP Option82 is vnpt
17. true(17) -indicates the RAIO mode of DHCP Option82 is true
18. skb(18) -indicates the RAIO mode of DHCP Option82 is skb
Default: common(1)
Restrictions:
bt(7) is not supported.
When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable.
"
::= { hwPITP 9}
hwDslamRAIOFormatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamRAIOFormatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for querying the RAIO format; supports the setting of only the user-defined mode.
The indexes of this table are hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode and hwDslamRAIOIfType.
"
::= { hwPITP 10 }
hwDslamRAIOFormatEntry OBJECT-TYPE
SYNTAX HwDslamRAIOFormatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for querying the RAIO format; supports the setting of only the user-defined mode.
The indexes of this entry are hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode and hwDslamRAIOIfType.
"
INDEX { hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode, hwDslamRAIOIfType }
::= { hwDslamRAIOFormatTable 1 }
HwDslamRAIOFormatEntry ::=
SEQUENCE {
hwDslamRAIOObject INTEGER,
hwDslamRAIOIdPara INTEGER,
hwDslamRAIOMode INTEGER,
hwDslamRAIOIfType INTEGER,
hwDslamRAIOFormatString OCTET STRING,
hwDslamRAIORowStatus RowStatus
}
hwDslamRAIOObject OBJECT-TYPE
SYNTAX INTEGER
{
pitp(1),
dhcpOption82(2),
ancp(3),
dhcpv6Option(4),
radiusNasPortId(5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the RAIO object. This leaf is an index.
Options:
1. pitp(1) -indicates the RAIO object is pitp
2. dhcpOption82(2) -indicates the RAIO object is dhcpOption82
3. ancp(3) -indicates the RAIO object is ancp
4. dhcpv6Option(4) -indicates the RAIO object is dhcpv6Option
5. radiusNasPortId(5) -indicates the RAIO object is radiusNasPortId
"
::= { hwDslamRAIOFormatEntry 1 }
hwDslamRAIOIdPara OBJECT-TYPE
SYNTAX INTEGER
{
cid(1),
rid(2),
info(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the RAIO ID parameter. This leaf is an index.
Options:
1. cid(1) -indicates the RAIO object is cid
2. rid(2) -indicates the RAIO object is rid
3. info(3) -indicates the RAIO object is info
"
::= { hwDslamRAIOFormatEntry 2 }
hwDslamRAIOMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
servicePortUserLabel(8),
dslForumDefault(9),
brt(10),
userDefined(11),
ft(12),
cntelXpon(13),
tm(14),
bbf(15),
vnpt(16),
true(17),
skb(18)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the RAIO mode. This leaf is an index.
Options:
1. common(1) -indicates the RAIO mode is common
2. xdslPortRate(2) -indicates the RAIO mode is Xdsl port rate
3. cntel(3) -indicates the RAIO mode is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode is neuf
6. portUserLabel(6) -indicates the RAIO mode is portUserLabel
7. bt(7) -indicates the RAIO mode is bt
8. servicePortUserLabel(8) -indicates the RAIO mode is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode is dslForumDefault
10. brt(10) -indicates the RAIO mode is brt
11. userDefined(11) -indicates the RAIO mode is user defined
12. ft(12) -indicates the RAIO mode is ft
13. cntelXpon(13) -indicates the RAIO mode is Xpon add BRAS
14. tm(14) -indicates the RAIO mode is tm
15. bbf(15) -indicates the RAIO mode is bbf
16. vnpt(16) -indicates the RAIO mode is vnpt
17. true(17) -indicates the RAIO mode is true
18. skb(18) -indicates the RAIO mode is skb
Default: common(1)
Restrictions:
bt(7) and skb(18) are not supported.
The VBAS supports only common(1), cntel(3), and userDefined(11).
"
::= { hwDslamRAIOFormatEntry 3 }
hwDslamRAIOIfType OBJECT-TYPE
SYNTAX INTEGER
{
atm(1),
eth(2),
xpon(3),
eoc(4),
docsis(5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface type.
Options:
1. atm(1) -atm interface type
2. eth(2) -eth interface type
3. xpon(3) -xpon interface type
4. eoc(4) -eoc interface type
5. docsis(5) -docsis interface type
For the ATM access mode (the ATM mode of xDSL boards),
the value of this leaf is atm(1); for the Ethernet access mode
(the PTM mode of the OPFA board and xDSL boards), the value of
this leaf is eth(2); for the xPON access mode, the value of this leaf is xpon(3);
for the EOC access mode, the value of this leaf is eoc(4);
for the docsis access mode, the value of this leaf is docsis(5).
"
::= { hwDslamRAIOFormatEntry 4 }
hwDslamRAIOFormatString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the character string of the RAIO format.
Range: a string of 0-255 characters.
"
::= { hwDslamRAIOFormatEntry 5 }
hwDslamRAIORowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status, used for deleting the RAIO format.
Options active(1), createAndGo(4) and destroy(6) are supported. Currently,
this leaf does not support the create and query operations.
To modify the RAIO format, you need not bind the row status.
To delete the RAIO format, you must input hwDslamRAIORowStatus.
"
DEFVAL { active }
::= { hwDslamRAIOFormatEntry 6}
hwDslamPITPPmodePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamPITPPmodePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PITP pmode of port management table.
The index of this table is ifIndex.
"
::= { hwPITP 12 }
hwDslamPITPPmodePortEntry OBJECT-TYPE
SYNTAX HwDslamPITPPmodePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PITP pmode of port management table.
The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwDslamPITPPmodePortTable 1 }
HwDslamPITPPmodePortEntry ::=
SEQUENCE {
hwDslamPITPPmodePortAdminStatus
TruthValue,
hwDslamPITPPmodePortUplinkStatus
TruthValue,
hwDslamPITPPmodePortRowStatus
RowStatus
}
hwDslamPITPPmodePortAdminStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PITP pmode of port administer state.
Options: true(enable), false(disable)
Default: false
"
DEFVAL { false }
::= { hwDslamPITPPmodePortEntry 1 }
hwDslamPITPPmodePortUplinkStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up-link administer state. Only a port on main board can be an up-link.
Options: true(yes), false(no),
Default: true
"
::= { hwDslamPITPPmodePortEntry 2 }
hwDslamPITPPmodePortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status.
Add or delete a table item.
"
::= { hwDslamPITPPmodePortEntry 3 }
hwDslamPITPPmodeSuboption90Status OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates PPPoE plus Suboption90.
Options:
1. true(1) -indicates PPPoE plus Suboption90 is enable
2. false(2) -indicates PPPoE plus Suboption90 is disable
Default: false(2)
Restrictions:
The operation on this leaf takes effect in the PPPoE plus mode only.
"
::= { hwPITP 13 }
hwDslamPITPPmodeSuboptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamPITPPmodeSuboptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PITP pmode suboption table.
The index of this table is hwDslamPITPPmodeSuboptionIndex.
"
::= { hwPITP 14 }
hwDslamPITPPmodeSuboptionEntry OBJECT-TYPE
SYNTAX HwDslamPITPPmodeSuboptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PITP pmode suboption table.
The index of this entry is hwDslamPITPPmodeSuboptionIndex.
"
INDEX { hwDslamPITPPmodeSuboptionIndex }
::= { hwDslamPITPPmodeSuboptionTable 1 }
HwDslamPITPPmodeSuboptionEntry ::=
SEQUENCE {
hwDslamPITPPmodeSuboptionIndex
Integer32,
hwDslamPITPPmodeSuboptionStatus
TruthValue
}
hwDslamPITPPmodeSuboptionIndex OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the index of PITP pmode suboption:
-index 1 stand for suboption 0x81;
-index 2 stand for suboption 0x82;
-index 3 stand for suboption 0x83;
-index 4 stand for suboption 0x84;
-index 5 stand for suboption 0x85;
-index 6 stand for suboption 0x86;
-index 7 stand for suboption 0x87;
-index 8 stand for suboption 0x88;
-index 9 stand for suboption 0x89;
-index 10 stand for suboption 0x8a;
-index 11 stand for suboption 0x8b;
-index 12 stand for suboption 0x8c;
-index 13 stand for suboption 0x8d;
-index 14 stand for suboption 0x8e;
-index 15 stand for suboption 0x90;
DEFVAL { 1 }
"
::= { hwDslamPITPPmodeSuboptionEntry 1 }
hwDslamPITPPmodeSuboptionStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configuration of PITP pmode suboption.
Options: true(enable), false(disable)
Default: false
"
DEFVAL { 2 }
::= { hwDslamPITPPmodeSuboptionEntry 2 }
hwDslamRaioSuboptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamRaioSuboptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying RAIO suboptions.
The indexes of this table are hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex.
"
::= { hwPITP 15 }
hwDslamRaioSuboptionEntry OBJECT-TYPE
SYNTAX HwDslamRaioSuboptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying RAIO suboptions.
The indexes of this entry are hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex.
"
INDEX { hwDslamRaioProtocolTypeIndex, hwDslamRaioSuboptionIndex }
::= { hwDslamRaioSuboptionTable 1 }
HwDslamRaioSuboptionEntry ::=
SEQUENCE {
hwDslamRaioProtocolTypeIndex
Integer32,
hwDslamRaioSuboptionIndex
Integer32,
hwDslamRaioSuboptionStatus
INTEGER
}
hwDslamRaioProtocolTypeIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the protocol type supporting RAIO suboptions. This leaf is an index.
Range: 1-255
The value 1 indicates DHCP Option82, 2 indicates PPPoE plus, 3 indicates DHCPv6 Option17, 4 indicates ANCP, and 5-255 are reserved.
"
::= { hwDslamRaioSuboptionEntry 1 }
hwDslamRaioSuboptionIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the RAIO suboption. This leaf is an index.
Range: 1-255
1-17 correspond to suboptions 0x81-0x91.
18 correspond to suboptions 0x92.
20-21 correspond to suboptions 0x94-0x95.
23-24 correspond to suboptions 0x97-0x98.
"
::= { hwDslamRaioSuboptionEntry 2 }
hwDslamRaioSuboptionStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of the RAIO suboption.
Options:
1. enable(1) -indicates the RAIO suboption is enable
2. disable(2) -indicates the RAIO suboption is disable
Default: disable(2)
"
::= { hwDslamRaioSuboptionEntry 3 }
hwDslamAccessNodeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the ANID.
Range: a string of 0-50 characters
Restrictions:
This leaf does not support the create operation, and supports only the modify and query operations.
To cancel the settings of the ANID, you can directly perform the set operation without inputting a leaf value.
"
::= { hwPITP 16 }
hwDslamAccessNodeIp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the L3 interface in the ANIP field. Currently, the device management IP address is used as the device identifier.
The value of the device management IP address is obtained through the VLAN L3 interface specified by hwDslamAccessNodeIp.
Range: 0-4294967295
Restrictions:
This leaf does not support the create operation, and supports only the modify and query operations.
To cancel the settings of the ANIP, input leaf value 4294967295 (equaling 0xFFFFFFFF) and perform the set operation.
"
::= { hwPITP 17 }
--
-- ANCP RAIO mode
--
hwDslamAncpRAIOMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
servicePortUserLabel(8),
dslForumDefault(9),
brt(10),
userDefined(11),
ft(12),
cntelXpon(13),
tm(14),
bbf(15),
vnpt(16),
true(17),
skb(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RAIO(Relay agent info Option) mode of ANCP.
Options:
1. common(1) -indicates the RAIO mode of ANCP is common
2. xdslPortRate(2) -indicates the RAIO mode of ANCP is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of ANCP is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of ANCP is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of ANCP is neuf
6. portUserLabel(6) -indicates the RAIO mode of ANCP is portUserLabel
7. bt(7) -indicates the RAIO mode of ANCP is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of ANCP is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of ANCP is dslForumDefault
10. brt(10) -indicates the RAIO mode of ANCP is brt
11. userDefined(11) -indicates the RAIO mode of ANCP is user defined
12. ft(12) -indicates the RAIO mode of ANCP is ft
13. cntelXpon(13) -indicates the RAIO mode of ANCP is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of ANCP is tm
15. bbf(15) -indicates the RAIO mode of ANCP is bbf
16. vnpt(16) -indicates the RAIO mode of ANCP is vnpt
17. true(17) -indicates the RAIO mode of ANCP is true
18. skb(18) -indicates the RAIO mode of ANCP is skb
Default: dslForumDefault(9)
Restrictions:
bt(7) and skb(18) are not supported.
"
::= { hwPITP 18}
--
-- DHCPv6Option RAIO mode
--
hwDslamDHCPv6OPTIONRAIOMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
servicePortUserLabel(8),
dslForumDefault(9),
brt(10),
userDefined(11),
ft(12),
cntelXpon(13),
tm(14),
bbf(15),
vnpt(16),
true(17),
skb(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the RAIO mode of DHCPv6 Option.
Options:
1. common(1) -indicates the RAIO mode of DHCPv6 option is common
2. xdslPortRate(2) -indicates the RAIO mode of DHCPv6 option is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of DHCPv6 option is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of DHCPv6 option is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of DHCPv6 option is neuf
6. portUserLabel(6) -indicates the RAIO mode of DHCPv6 option is portUserLabel
7. bt(7) -indicates the RAIO mode of DHCPv6 option is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of DHCPv6 option is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of DHCPv6 option is dslForumDefault
10. brt(10) -indicates the RAIO mode of DHCPv6 option is brt
11. userDefined(11) -indicates the RAIO mode of DHCPv6 option is user defined
12. ft(12) -indicates the RAIO mode of DHCPv6 option is ft
13. cntelXpon(13) -indicates the RAIO mode of DHCPv6 option is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of DHCPv6 option is tm
15. bbf(15) -indicates the RAIO mode of DHCPv6 option is bbf
16. vnpt(16) -indicates the RAIO mode of DHCPv6 option is vnpt
17. true(17) -indicates the RAIO mode of DHCPv6 option is true
18. skb(18) -indicates the RAIO mode of DHCPv6 option is skb
Default: common(1)
Restrictions:
bt(7) and skb(18) are not supported.
When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable.
"
::= { hwPITP 19}
--
-- Enterprise number
--
hwDslamRAIODhcpv6Option37EnterpriseNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the enterprise number which is used in DHCPv6 option 37.
Range: 0-4294967295
DEFVAL {2011}
"
::= { hwPITP 20}
--
-- RAIO profile
--
hwDslamRaioProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamRaioProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for creating, setting and querying RAIO profiles.
The index of this table is hwDslamRaioProfileName.
"
::= { hwPITP 21 }
hwDslamRaioProfileEntry OBJECT-TYPE
SYNTAX HwDslamRaioProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for creating, setting and querying RAIO profiles.
The index of this entry is hwDslamRaioProfileName.
"
INDEX { hwDslamRaioProfileName }
::= { hwDslamRaioProfileTable 1 }
HwDslamRaioProfileEntry ::=
SEQUENCE {
hwDslamRaioProfileName OCTET STRING,
hwDslamRaioProfileAccessNodeIpIfType INTEGER,
hwDslamRaioProfileAccessNodeIpIfNumber Integer32,
hwDslamRaioProfilePitpRaioMode INTEGER,
hwDslamRaioProfileDhcpOption82RaioMode INTEGER,
hwDslamRaioProfileAncpRaioMode INTEGER,
hwDslamRaioProfileDhcpv6OptionRaioMode INTEGER,
hwDslamRaioProfileDhcpv6Option37EnterpriseNumber Unsigned32,
hwDslamRaioProfileAccessNodeId OCTET STRING,
hwDslamRaioProfileRowStatus RowStatus,
hwDslamRaioProfileRadiusNasPortIdRaioMode INTEGER
}
hwDslamRaioProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RAIO profile name.
Range: a string of 1-32 characters
"
::= { hwDslamRaioProfileEntry 1 }
hwDslamRaioProfileAccessNodeIpIfType OBJECT-TYPE
SYNTAX INTEGER
{
notConfiged(1),
meth(2),
loopback(3),
vlanif(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface type.
Options:
1. notConfiged(1) -indicates that no source interface is configured
2. meth(2) -indicates the MEth interface
3. loopback(3) -indicates the loopback interface
4. vlanif(4) -indicates the VLAN interface
When this leaf is set to notConfiged(1), it means that no source
interface is configured in the case of the create operation, and
that the source interface is deleted in the case of the modify operation.
"
::= { hwDslamRaioProfileEntry 2 }
hwDslamRaioProfileAccessNodeIpIfNumber OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface ID.
Range: 0-4093
Range for the MEth interface: 0
Range for the loopback interface: 0-31
Range for the VLAN interface: 1-4093
The interface ID and interface type together identify an interface.
"
::= { hwDslamRaioProfileEntry 3 }
hwDslamRaioProfilePitpRaioMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
servicePortUserLabel(8),
dslForumDefault(9),
brt(10),
userDefined(11),
ft(12),
cntelXpon(13),
tm(14),
bbf(15),
vnpt(16),
true(17),
skb(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the RAIO mode. This leaf is an index.
Options:
1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common
2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf
6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel
7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of PPPoE plus/VBAS is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of PPPoE plus/VBAS is dslForumDefault
10. brt(10) -indicates the RAIO mode of PPPoE plus/VBAS is brt
11. userDefined(11) -indicates the RAIO mode of PPPoE plus/VBAS is user defined
12. ft(12) -indicates the RAIO mode of PPPoE plus/VBAS is ft
13. cntelXpon(13) -indicates the RAIO mode of PPPoE plus/VBAS is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of PPPoE plus/VBAS is tm
15. bbf(15) -indicates the RAIO mode of PPPoE plus/VBAS is bbf
16. vnpt(16) -indicates the RAIO mode of PPPoE plus/VBAS is vnpt
17. true(17) -indicates the RAIO mode of PPPoE plus/VBAS is true
18. skb(18) -indicates the RAIO mode of PPPoE plus/VBAS is skb
Default: common(1)
Restrictions:
bt(7) and skb(18) are not supported.
The VBAS supports only common(1), cntel(3), and userDefined(11).
"
::= { hwDslamRaioProfileEntry 4 }
hwDslamRaioProfileDhcpOption82RaioMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
servicePortUserLabel(8),
dslForumDefault(9),
brt(10),
userDefined(11),
ft(12),
cntelXpon(13),
tm(14),
bbf(15),
vnpt(16),
true(17),
skb(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the RAIO mode. This leaf is an index.
Options:
1. common(1) -indicates the RAIO mode of DHCP Option82 is common
2. xdslPortRate(2) -indicates the RAIO mode of DHCP Option82 is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of DHCP Option82 is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of DHCP Option82 is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of DHCP Option82 is neuf
6. portUserLabel(6) -indicates the RAIO mode of DHCP Option82 is portUserLabel
7. bt(7) -indicates the RAIO mode of DHCP Option82 is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of DHCP Option82 is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of DHCP Option82 is dslForumDefault
10. brt(10) -indicates the RAIO mode of DHCP Option82 is brt
11. userDefined(11) -indicates the RAIO mode of DHCP Option82 is user defined
12. ft(12) -indicates the RAIO mode of DHCP Option82 is ft
13. cntelXpon(13) -indicates the RAIO mode of DHCP Option82 is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of DHCP Option82 is tm
15. bbf(15) -indicates the RAIO mode of DHCP Option82 is bbf
16. vnpt(16) -indicates the RAIO mode of DHCP Option82 is vnpt
17. true(17) -indicates the RAIO mode of DHCP Option82 is true
18. skb(18) -indicates the RAIO mode of DHCP Option82 is skb
Default: common(1)
Restrictions:
bt(7) is not supported.
"
::= { hwDslamRaioProfileEntry 5 }
hwDslamRaioProfileAncpRaioMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
servicePortUserLabel(8),
dslForumDefault(9),
brt(10),
userDefined(11),
ft(12),
cntelXpon(13),
tm(14),
bbf(15),
vnpt(16),
true(17),
skb(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the RAIO mode. This leaf is an index.
Options:
1. common(1) -indicates the RAIO mode of ANCP is common
2. xdslPortRate(2) -indicates the RAIO mode of ANCP is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of ANCP is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of ANCP is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of ANCP is neuf
6. portUserLabel(6) -indicates the RAIO mode of ANCP is portUserLabel
7. bt(7) -indicates the RAIO mode of ANCP is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of ANCP is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of ANCP is dslForumDefault
10. brt(10) -indicates the RAIO mode of ANCP is brt
11. userDefined(11) -indicates the RAIO mode of ANCP is user defined
12. ft(12) -indicates the RAIO mode of ANCP is ft
13. cntelXpon(13) -indicates the RAIO mode of ANCP is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of ANCP is tm
15. bbf(15) -indicates the RAIO mode of ANCP is bbf
16. vnpt(16) -indicates the RAIO mode of ANCP is vnpt
17. true(17) -indicates the RAIO mode of ANCP is true
18. skb(18) -indicates the RAIO mode of ANCP is skb
Default: dslForumDefault(9)
Restrictions:
bt(7) and skb(18) are not supported.
"
::= { hwDslamRaioProfileEntry 6 }
hwDslamRaioProfileDhcpv6OptionRaioMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
servicePortUserLabel(8),
dslForumDefault(9),
brt(10),
userDefined(11),
ft(12),
cntelXpon(13),
tm(14),
bbf(15),
vnpt(16),
true(17),
skb(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the RAIO mode. This leaf is an index.
Options:
1. common(1) -indicates the RAIO mode of DHCPv6 is common
2. xdslPortRate(2) -indicates the RAIO mode of DHCPv6 is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of DHCPv6 is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of DHCPv6 is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of DHCPv6 is neuf
6. portUserLabel(6) -indicates the RAIO mode of DHCPv6 is portUserLabel
7. bt(7) -indicates the RAIO mode of DHCPv6 is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of DHCPv6 is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of DHCPv6 is dslForumDefault
10. brt(10) -indicates the RAIO mode of DHCPv6 is brt
11. userDefined(11) -indicates the RAIO mode of DHCPv6 is user defined
12. ft(12) -indicates the RAIO mode of DHCPv6 is ft
13. cntelXpon(13) -indicates the RAIO mode of DHCPv6 is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of DHCPv6 is tm
15. bbf(15) -indicates the RAIO mode of DHCPv6 is bbf
16. vnpt(16) -indicates the RAIO mode of DHCPv6 is vnpt
17. true(17) -indicates the RAIO mode of DHCPv6 is true
18. skb(18) -indicates the RAIO mode of DHCPv6 is skb
Default: common(1)
Restrictions:
bt(7) and skb(18) are not supported.
"
::= { hwDslamRaioProfileEntry 7 }
hwDslamRaioProfileDhcpv6Option37EnterpriseNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the enterprise number which is used in DHCPv6 option 37.
Range: 0-4294967295
"
DEFVAL { 2011 }
::= { hwDslamRaioProfileEntry 8 }
hwDslamRaioProfileAccessNodeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the ANID.
Range: a string of 0-50 characters
Restrictions:
"
::= { hwDslamRaioProfileEntry 9 }
hwDslamRaioProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status, used for creating and deleting the RAIO profile.
Options createAndGo(4) and destroy(6) are supported. Currently,
to modify the RAIO profile, you need not bind the row status.
To delete the RAIO profile, you must input hwDslamRaioProfileRowStatus.
"
DEFVAL { active }
::= { hwDslamRaioProfileEntry 10 }
hwDslamRaioProfileRadiusNasPortIdRaioMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
servicePortUserLabel(8),
dslForumDefault(9),
brt(10),
userDefined(11),
ft(12),
cntelXpon(13),
tm(14),
bbf(15),
vnpt(16),
true(17),
skb(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the RAIO mode of RADIUS NAS-Port-Id. This leaf is an index.
Options:
1. common(1) -indicates the RAIO mode of RADIUS NAS-Port-Id is common
2. xdslPortRate(2) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of RADIUS NAS-Port-Id is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of RADIUS NAS-Port-Id is neuf
6. portUserLabel(6) -indicates the RAIO mode of RADIUS NAS-Port-Id is portUserLabel
7. bt(7) -indicates the RAIO mode of RADIUS NAS-Port-Id is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of RADIUS NAS-Port-Id is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of RADIUS NAS-Port-Id is dslForumDefault
10. brt(10) -indicates the RAIO mode of RADIUS NAS-Port-Id is brt
11. userDefined(11) -indicates the RAIO mode of RADIUS NAS-Port-Id is user defined
12. ft(12) -indicates the RAIO mode of RADIUS NAS-Port-Id is ft
13. cntelXpon(13) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of RADIUS NAS-Port-Id is tm
15. bbf(15) -indicates the RAIO mode of RADIUS NAS-Port-Id is bbf
16. vnpt(16) -indicates the RAIO mode of RADIUS NAS-Port-Id is vnpt
17. true(17) -indicates the RAIO mode of RADIUS NAS-Port-Id is true
18. skb(18) -indicates the RAIO mode of RADIUS NAS-Port-Id is skb
Default: common(1)
Restrictions:
bt(7) and skb(18) are not supported.
"
::= { hwDslamRaioProfileEntry 11 }
--
-- RAIO profile suboption
--
hwDslamRaioProfileSuboptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamRaioProfileSuboptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the RAIO suboption state of the RAIO profile.
The indexes of this table are hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex
and hwDslamRaioSuboptionIndex.
"
::= { hwPITP 22 }
hwDslamRaioProfileSuboptionEntry OBJECT-TYPE
SYNTAX HwDslamRaioProfileSuboptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the RAIO suboption state of the RAIO profile.
The indexes of this entry are hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex
and hwDslamRaioSuboptionIndex.
"
INDEX { hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex, hwDslamRaioSuboptionIndex }
::= { hwDslamRaioProfileSuboptionTable 1 }
HwDslamRaioProfileSuboptionEntry ::=
SEQUENCE {
hwDslamRaioProfileSuboptionStatus INTEGER
}
hwDslamRaioProfileSuboptionStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of the RAIO suboption.
Options:
1. enable(1) -indicates the RAIO suboption is enable
2. disable(2) -indicates the RAIO suboption is disable
Default: disable(2)
"
::= { hwDslamRaioProfileSuboptionEntry 1 }
--
-- RAIO profile format
--
hwDslamRaioProfileFormatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamRaioProfileFormatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for querying the RAIO format of the RAIO profile; supports the setting of only the user-defined mode.
The indexes of this table are hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara,
hwDslamRAIOMode, and hwDslamRAIOIfType.
"
::= { hwPITP 23 }
hwDslamRaioProfileFormatEntry OBJECT-TYPE
SYNTAX HwDslamRaioProfileFormatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for querying the RAIO format of the RAIO profile; supports the setting of only the user-defined mode.
The indexes of this entry are hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara,
hwDslamRAIOMode, and hwDslamRAIOIfType.
"
INDEX { hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode, hwDslamRAIOIfType }
::= { hwDslamRaioProfileFormatTable 1 }
HwDslamRaioProfileFormatEntry ::=
SEQUENCE {
hwDslamRaioProfileFormatString OCTET STRING
}
hwDslamRaioProfileFormatString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the character string of the RAIO format.
Range: a string of 0-255 characters.
"
::= { hwDslamRaioProfileFormatEntry 1 }
--
-- PPPOEPLUS statistics service-port
--
hwDslamPppoeFlowStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamPppoeFlowStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for querying and resetting the pppoeplus statistics on flow.
The index of this table is hwDslamPppoeFlowStatisticsIndex.
Statistics for a maximum of 64 service ports are supported.
"
::= { hwPITP 24 }
hwDslamPppoeFlowStatisticsEntry OBJECT-TYPE
SYNTAX HwDslamPppoeFlowStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for querying and resetting the pppoeplus statistics on flow.
The index of this entry is hwDslamPppoeFlowStatisticsIndex.
Statistics for a maximum of 64 service ports are supported.
"
INDEX { hwDslamPppoeFlowStatisticsIndex }
::= { hwDslamPppoeFlowStatisticsTable 1 }
HwDslamPppoeFlowStatisticsEntry ::=
SEQUENCE {
hwDslamPppoeFlowStatisticsIndex Unsigned32,
hwDslamPppoeFlowStatisticsRowStatus RowStatus,
hwDslamPppoeFlowStatisticsOperMode INTEGER,
hwDslamPppoeFlowStatisticsReceivePadi Unsigned32,
hwDslamPppoeFlowStatisticsReceivePado Unsigned32,
hwDslamPppoeFlowStatisticsReceivePadr Unsigned32,
hwDslamPppoeFlowStatisticsReceivePads Unsigned32,
hwDslamPppoeFlowStatisticsReceivePadt Unsigned32,
hwDslamPppoeFlowStatisticsSendPadi Unsigned32,
hwDslamPppoeFlowStatisticsSendPado Unsigned32,
hwDslamPppoeFlowStatisticsSendPadr Unsigned32,
hwDslamPppoeFlowStatisticsSendPads Unsigned32,
hwDslamPppoeFlowStatisticsSendPadt Unsigned32,
hwDslamPppoeFlowStatisticsTagTooLong Unsigned32,
hwDslamPppoeFlowStatisticsFrameTooLong Unsigned32,
hwDslamPppoeFlowStatisticsReceiveUntrusted Unsigned32,
hwDslamPppoeFlowStatisticsReceiveUnknownType Unsigned32
}
hwDslamPppoeFlowStatisticsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the PPPoE statistics on flow.
"
::= { hwDslamPppoeFlowStatisticsEntry 1 }
hwDslamPppoeFlowStatisticsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The present operation status of the row.
CreateAndGo(4) means enable the PPPoE statistics on flow.
Destroy(6) means disable the PPPoE statistics on flow.
Active(1) will be returned in the get operation.
"
::= { hwDslamPppoeFlowStatisticsEntry 2 }
hwDslamPppoeFlowStatisticsOperMode OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates reset the PPPoE statistics on flow.
Options:
1. reset(1) -In the set operation, reset the PPPoE statistics on flow.
2. invalid(2) -In the get operation, the invalid value 2 is returned.
Default: invalid(2)
"
::= { hwDslamPppoeFlowStatisticsEntry 3 }
hwDslamPppoeFlowStatisticsReceivePadi OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received PADI packets.
"
::= { hwDslamPppoeFlowStatisticsEntry 4 }
hwDslamPppoeFlowStatisticsReceivePado OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received PADO packets.
"
::= { hwDslamPppoeFlowStatisticsEntry 5 }
hwDslamPppoeFlowStatisticsReceivePadr OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received PADR packets.
"
::= { hwDslamPppoeFlowStatisticsEntry 6 }
hwDslamPppoeFlowStatisticsReceivePads OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received PADS packets.
"
::= { hwDslamPppoeFlowStatisticsEntry 7 }
hwDslamPppoeFlowStatisticsReceivePadt OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received PADT packets.
"
::= { hwDslamPppoeFlowStatisticsEntry 8 }
hwDslamPppoeFlowStatisticsSendPadi OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sent PADI packets.
"
::= { hwDslamPppoeFlowStatisticsEntry 9 }
hwDslamPppoeFlowStatisticsSendPado OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sent PADO packets.
"
::= { hwDslamPppoeFlowStatisticsEntry 10 }
hwDslamPppoeFlowStatisticsSendPadr OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sent PADR packets.
"
::= { hwDslamPppoeFlowStatisticsEntry 11 }
hwDslamPppoeFlowStatisticsSendPads OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sent PADS packets.
"
::= { hwDslamPppoeFlowStatisticsEntry 12 }
hwDslamPppoeFlowStatisticsSendPadt OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sent PADT packets.
"
::= { hwDslamPppoeFlowStatisticsEntry 13 }
hwDslamPppoeFlowStatisticsTagTooLong OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets exceed the maximum tag size.
"
::= { hwDslamPppoeFlowStatisticsEntry 14 }
hwDslamPppoeFlowStatisticsFrameTooLong OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets exceed the maximum packet size.
"
::= { hwDslamPppoeFlowStatisticsEntry 15 }
hwDslamPppoeFlowStatisticsReceiveUntrusted OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received packets with untrusted tag.
"
::= { hwDslamPppoeFlowStatisticsEntry 16 }
hwDslamPppoeFlowStatisticsReceiveUnknownType OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received packets with unknown type.
"
::= { hwDslamPppoeFlowStatisticsEntry 17 }
hwDslamPppoeReverse OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of the global reverse PPPoE packets switch.
Options:
1. enable(1) -indicates the reverse PPPoE packets are forwarded
2. disable(2) -indicates the reverse PPPoE packets are dropped
Default: disable(2)
"
::= { hwPITP 25 }
hwDslamRaioCableLabsSuboptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamRaioCableLabsSuboptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the RAIO CableLabs suboption.
The index of this table is hwDslamRaioCableLabsSuboptionIndex.
"
::= { hwPITP 26 }
hwDslamRaioCableLabsSuboptionEntry OBJECT-TYPE
SYNTAX HwDslamRaioCableLabsSuboptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the RAIO CableLabs suboption.
The index of this entry is hwDslamRaioCableLabsSuboptionIndex.
"
INDEX { hwDslamRaioCableLabsSuboptionIndex }
::= { hwDslamRaioCableLabsSuboptionTable 1 }
HwDslamRaioCableLabsSuboptionEntry ::=
SEQUENCE {
hwDslamRaioCableLabsSuboptionIndex
INTEGER,
hwDslamRaioCableLabsSuboptionStatus
INTEGER,
hwDslamRaioCableLabsSuboptionPara
OCTET STRING
}
hwDslamRaioCableLabsSuboptionIndex OBJECT-TYPE
SYNTAX INTEGER {
docsisversion(1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the RAIO CableLabs suboption. This leaf is an index.
Options:
1. docsisversion(1) -indicates the DOCSIS version suboption
"
::= { hwDslamRaioCableLabsSuboptionEntry 1 }
hwDslamRaioCableLabsSuboptionStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of the RAIO CableLabs suboption.
Options:
1. enable(1) -indicates the RAIO CableLabs suboption is enable
2. disable(2) -indicates the RAIO CableLabs suboption is disable
Default: disable(2)
"
::= { hwDslamRaioCableLabsSuboptionEntry 2 }
hwDslamRaioCableLabsSuboptionPara OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the parameters of RAIO CableLabs suboption.
Range: a string of 0-255 characters.
When hwDslamRaioCableLabsSuboptionIndex is 1,
the first byte indicates the DOCSIS major version(ranges from 1 to 9),
and the second byte indicates the DOCSIS minor version(ranges from 0 to 9),
and other bytes are reserved, for example, 30 indicates
that the DOCSIS version is 3.0.
"
::= { hwDslamRaioCableLabsSuboptionEntry 3 }
hwDslamRAIOAncpAggCidFormatString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the character string of the Access-Aggregation-Circuit-ID-ASCII format
and Access-Aggregation-Circuit-ID-Binary format.
Range: a string of 0-127 characters."
::= { hwPITP 27 }
hwDslamRaioDHCPv6Option17CableLabsSubSuboptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the RAIO DHCPv6 Option17 CableLabs sub-suboption.
The index of this table is hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex and
hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex."
::= { hwPITP 28 }
hwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry OBJECT-TYPE
SYNTAX HwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the RAIO DHCPv6 Option17 CableLabs sub-suboption.
The index of this entry is hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex and
hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex."
INDEX { hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex, hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex }
::= { hwDslamRaioDHCPv6Option17CableLabsSubSuboptionTable 1 }
HwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry ::=
SEQUENCE {
hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex
Integer32,
hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex
Integer32,
hwDslamRaioDHCPv6Option17CableLabsSubSuboptionStatus
INTEGER,
hwDslamRaioDHCPv6Option17CableLabsSubSuboptionPara
OCTET STRING
}
hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the RAIO DHCPv6 Option17 CableLabs suboption. This leaf is an index.
Range: 0-65535
"
::= { hwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry 1 }
hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the RAIO DHCPv6 Option17 CableLabs sub-suboption. This leaf is an index.
Range: 0-65535
"
::= { hwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry 2 }
hwDslamRaioDHCPv6Option17CableLabsSubSuboptionStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of the RAIO DHCPv6 Option17 CableLabs sub-suboption.
Options:
1. enable(1) -indicates the RAIO DHCPv6 Option17 CableLabs sub-suboption is enable
2. disable(2) -indicates the RAIO DHCPv6 Option17 CableLabs sub-suboption is disable
Default: disable(2)
"
::= { hwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry 3 }
hwDslamRaioDHCPv6Option17CableLabsSubSuboptionPara OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the parameters of RAIO DHCPv6 Option17 CableLabs sub-suboption.
Range: a string of 0-255 characters.
When hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex is 1025, and
hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex is 1,
the first byte indicates the DOCSIS major version(ranges from 1 to 9),
and the second byte indicates the DOCSIS minor version(ranges from 0 to 9),
and other bytes are reserved, for example, 30 indicates
that the DOCSIS version is 3.0.
"
::= { hwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry 4 }
hwDslamPITPTransparentUserVlanType OBJECT-TYPE
SYNTAX BITS
{
untag(0),
singleTag(1),
multiTag(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the user VLAN based on which PITP pmode is transparently transmitted.
Options:
1. untag(0) -indicates that the user packet does not contain VLANs
2. singleTag(1) -indicates that the user packet contains a single VLAN
3. multiTag(2) -indicates that the user packet contains multiple VLANs
When singleTag is 0, set hwDslamPITPTransparentSingleUserVlanList to a null character string.
When singleTag is 1, set hwDslamPITPTransparentSingleUserVlanList to a valid character string.
"
::= { hwPITP 29 }
hwDslamPITPTransparentSingleUserVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the list of user single VLANs contained in the packets whose PITP pmode is transparently transmitted.
VLAN ranges from 0 to 4095. The VLAN list is a character string consisting of digits (0-9) or digits and VLAN segments.
Digits and VLAN segments are separated by a comma, for example, 2,200-300.
For example:
1.To set user-side VLAN status to singleTag, VLAN list to 2,100-300, do as follows:
singleTag(1) is set to 1 in hwDslamPITPTransparentUserVlanType, hwDslamPITPTransparentSingleUserVlanList:2,100-300
2.To set user-side VLAN status to untag and multiTag, do as follows:
untag(0) and multiTag(2) are set to 1 in hwDslamPITPTransparentUserVlanType, hwDslamPITPTransparentSingleUserVlanList is a null character string.
"
::= { hwPITP 30 }
hwDslamRaioSuboptionActualDataRateType OBJECT-TYPE
SYNTAX INTEGER
{
actualDataRate(1),
actualNetDataRate(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the actual data rate type of RAIO suboption.
Options:
1. actualDataRate(1) -indicates the RAIO suboption is actual data rate. The meaning of actualDataRate is defined in ITU-T G.997.1, paragraph 7.5.2.1 actual data rate.
2. actualNetDataRate(2) -indicates the RAIO suboption is actual net data rate. The meaning of actualNetDataRate is defined in ITU-T G.997.1, paragraph 7.5.2.8 actual net data rate (ACTNDR).
Default: actualDataRate(1)
"
::= { hwPITP 31 }
hwDslamRadiusNasPortIdRAIOMode OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
xdslPortRate(2),
cntel(3),
ti(4),
neuf(5),
portUserLabel(6),
bt(7),
servicePortUserLabel(8),
dslForumDefault(9),
brt(10),
userDefined(11),
ft(12),
cntelXpon(13),
tm(14),
bbf(15),
vnpt(16),
true(17),
skb(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the RAIO mode of RADIUS NAS-Port-Id.
Options:
1. common(1) -indicates the RAIO mode of RADIUS NAS-Port-Id is common
2. xdslPortRate(2) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xdsl port rate
3. cntel(3) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xdsl add BRAS
4. ti(4) -indicates the RAIO mode of RADIUS NAS-Port-Id is TI Add Dhcp && PITP Tag
5. neuf(5) -indicates the RAIO mode of RADIUS NAS-Port-Id is neuf
6. portUserLabel(6) -indicates the RAIO mode of RADIUS NAS-Port-Id is portUserLabel
7. bt(7) -indicates the RAIO mode of RADIUS NAS-Port-Id is bt
8. servicePortUserLabel(8) -indicates the RAIO mode of RADIUS NAS-Port-Id is servicePortUserLabel
9. dslForumDefault(9) -indicates the RAIO mode of RADIUS NAS-Port-Id is dslForumDefault
10. brt(10) -indicates the RAIO mode of RADIUS NAS-Port-Id is brt
11. userDefined(11) -indicates the RAIO mode of RADIUS NAS-Port-Id is user defined
12. ft(12) -indicates the RAIO mode of RADIUS NAS-Port-Id is ft
13. cntelXpon(13) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xpon add BRAS
14. tm(14) -indicates the RAIO mode of RADIUS NAS-Port-Id is tm
15. bbf(15) -indicates the RAIO mode of RADIUS NAS-Port-Id is bbf
16. vnpt(16) -indicates the RAIO mode of RADIUS NAS-Port-Id is vnpt
17. true(17) -indicates the RAIO mode of RADIUS NAS-Port-Id is true
18. skb(18) -indicates the RAIO mode of RADIUS NAS-Port-Id is skb
Default: common(1)
Restrictions:
bt(7) and skb(18) are not supported.
When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable.
"
::= { hwPITP 32}
hwDslamRaioSuboptionFastReport OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that fast sub-option report by DHCP/DHCPv6/PPPoE+ sub-option 0x81/0x82/0x8C/0x8E is enabled or disabled globally.
Options:
1. disable(1) - Indicates that fast sub-option report by DHCP/DHCPv6/PPPoE+ sub-option 0x81/0x82/0x8C/0x8E is disabled globally.
2. enable(2) - Indicates that fast sub-option report by DHCP/DHCPv6/PPPoE+ sub-option 0x81/0x82/0x8C/0x8E is enabled globally.
Default: disable(1)
"
::= { hwPITP 33 }
hwDslamRaioSuboptionValueTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamRaioSuboptionValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to set and query suboption of DHCP, PPPoE+, and ANCP.
If suboption is set by using this table, the set value is used.
If it is not set, the value automatically generated according to actual port conditions is used.
The index of this table is hwDslamRaioSuboptionValueIndex and hwDslamRaioSuboptionValueIftype.
"
::= { hwPITP 34 }
hwDslamRaioSuboptionValueEntry OBJECT-TYPE
SYNTAX HwDslamRaioSuboptionValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to set and query suboption of DHCP, PPPoE+, and ANCP.
If suboption is set by using this table, the set value is used.
If it is not set, the value automatically generated according to actual port conditions is used.
The index of this entry is hwDslamRaioSuboptionValueIndex and hwDslamRaioSuboptionValueIftype.
"
INDEX { hwDslamRaioSuboptionValueIndex, hwDslamRaioSuboptionValueIftype }
::= { hwDslamRaioSuboptionValueTable 1 }
HwDslamRaioSuboptionValueEntry ::=
SEQUENCE {
hwDslamRaioSuboptionValueIndex
Integer32,
hwDslamRaioSuboptionValue
OCTET STRING,
hwDslamRaioSuboptionValueIftype
INTEGER
}
hwDslamRaioSuboptionValueIndex OBJECT-TYPE
SYNTAX Integer32 (16..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the RAIO suboption. This leaf is an index.
Range: 1-17
Currently, only suboption 0x90 is supported. The corresponding index is 16.
"
::= { hwDslamRaioSuboptionValueEntry 1 }
hwDslamRaioSuboptionValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the suboption value.
Range: the length of the value must be 3 or 0 bytes.
Setting null string, which length is 0, means delete the suboption value.
"
::= { hwDslamRaioSuboptionValueEntry 2 }
hwDslamRaioSuboptionValueIftype OBJECT-TYPE
SYNTAX INTEGER
{
atm(1),
eth(2),
xpon(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface type.
Options:
1. atm(1) -atm interface type
2. eth(2) -eth interface type
3. xpon(3) -xpon interface type
For the ATM access mode, the value of this leaf is atm(1);
for the Ethernet access mode , the value of this leaf is eth(2);
for the xPON access mode, the value of this leaf is xpon(3).
"
::= { hwDslamRaioSuboptionValueEntry 3 }
hwDslamPppoeEchoUpportMonitor OBJECT IDENTIFIER ::= { hwPITP 35}
hwDslamPppoeEchoUpportMonitorSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the PPPoE Echo monitoring function of the uplink port.
Options:
1. enable(1) - Indicates that the PPPoE Echo monitoring function of the uplink port is enabled.
2. disable(2) - Indicates that the PPPoE Echo monitoring function of the uplink port is disabled.
Default: enable(1)
"
::= { hwDslamPppoeEchoUpportMonitor 1 }
hwDslamPppoeEchoUpportMonitorPeriod OBJECT-TYPE
SYNTAX Integer32 (1..60)
UNITS "minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the PPPoE Echo monitoring period of the uplink port.
Unit: minute
Default: 10
"
::= { hwDslamPppoeEchoUpportMonitor 2 }
hwDslamPppoeEchoUpportMonitorThreshold OBJECT-TYPE
SYNTAX Integer32 (10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the PPPoE Echo monitoring threshold for the uplink port.
Unit: 1/100
Default: 50
"
::= { hwDslamPppoeEchoUpportMonitor 3 }
hwDslamPppoeEchoUpportMonitorMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamPppoeEchoUpportMonitorMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the PPPoE Echo monitoring table of uplink ports.
The index of this table is hwDslamPppoeEchoUpportMonitorMemberIfIndex.
"
::= { hwDslamPppoeEchoUpportMonitor 4 }
hwDslamPppoeEchoUpportMonitorMemberEntry OBJECT-TYPE
SYNTAX HwDslamPppoeEchoUpportMonitorMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the PPPoE Echo monitoring table of uplink ports.
The index of this entry is hwDslamPppoeEchoUpportMonitorMemberIfIndex.
"
INDEX { hwDslamPppoeEchoUpportMonitorMemberIfIndex }
::= { hwDslamPppoeEchoUpportMonitorMemberTable 1 }
HwDslamPppoeEchoUpportMonitorMemberEntry ::=
SEQUENCE {
hwDslamPppoeEchoUpportMonitorMemberIfIndex Integer32,
hwDslamPppoeEchoUpportMonitorRowStatus RowStatus
}
hwDslamPppoeEchoUpportMonitorMemberIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the PPPoE Echo monitoring table of uplink ports.
"
::= { hwDslamPppoeEchoUpportMonitorMemberEntry 1 }
hwDslamPppoeEchoUpportMonitorRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status, used to query, create, modify, and delete a PPPoE Echo monitoring table of uplink ports.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
To modify the parameters of a PPPoE Echo monitoring table of uplink ports, this leaf need not be issued together.
Options:
1. active(1) - Indicates the query operation.
2. createAndGo(4) - Indicates the creating operation.
3. destroy(6) - Indicates the deleting operation.
"
::= { hwDslamPppoeEchoUpportMonitorMemberEntry 2 }
hwDslamPppoeEchoUpportMonitorRecordTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamPppoeEchoUpportMonitorRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the PPPoE Echo monitoring table of uplink ports.
The index of this table is hwDslamPppoeEchoUpportMonitorRecordIfIndex, hwDslamPppoeEchoUpportMonitorRecordIndex.
"
::= { hwDslamPppoeEchoUpportMonitor 5 }
hwDslamPppoeEchoUpportMonitorRecordEntry OBJECT-TYPE
SYNTAX HwDslamPppoeEchoUpportMonitorRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the PPPoE Echo monitoring table of uplink ports.
The index of this entry is hwDslamPppoeEchoUpportMonitorRecordIfIndex, hwDslamPppoeEchoUpportMonitorRecordIndex.
"
INDEX { hwDslamPppoeEchoUpportMonitorRecordIfIndex, hwDslamPppoeEchoUpportMonitorRecordIndex}
::= { hwDslamPppoeEchoUpportMonitorRecordTable 1 }
HwDslamPppoeEchoUpportMonitorRecordEntry ::=
SEQUENCE {
hwDslamPppoeEchoUpportMonitorRecordIfIndex
Integer32,
hwDslamPppoeEchoUpportMonitorRecordIndex
Integer32,
hwDslamPppoeEchoUpportMonitorRecordTime
DateAndTime,
hwDslamPppoeEchoUpportMonitorPppoeEchoRequestCount
Counter64,
hwDslamPppoeEchoUpportMonitorPppoeEchoReplyCount
Counter64,
hwDslamPppoeEchoUpportMonitorPppoeEchoRequestLastCount
Counter64,
hwDslamPppoeEchoUpportMonitorPppoeEchoReplyLastCount
Counter64
}
hwDslamPppoeEchoUpportMonitorRecordIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the level-1 index of the PPPoE Echo monitoring table of uplink ports.
"
::= { hwDslamPppoeEchoUpportMonitorRecordEntry 1 }
hwDslamPppoeEchoUpportMonitorRecordIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the level-2 index of the PPPoE Echo monitoring table of uplink ports.
"
::= { hwDslamPppoeEchoUpportMonitorRecordEntry 2 }
hwDslamPppoeEchoUpportMonitorRecordTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates period end time of PPPoE Echo packet statistics.
"
::= { hwDslamPppoeEchoUpportMonitorRecordEntry 3 }
hwDslamPppoeEchoUpportMonitorPppoeEchoRequestCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PPPoE Echo request packet number received by the uplink port.
"
::= { hwDslamPppoeEchoUpportMonitorRecordEntry 4 }
hwDslamPppoeEchoUpportMonitorPppoeEchoReplyCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PPPoE Echo reply packet number received by the uplink port.
"
::= { hwDslamPppoeEchoUpportMonitorRecordEntry 5 }
hwDslamPppoeEchoUpportMonitorPppoeEchoRequestLastCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the last PPPoE Echo request packet number received by the uplink port.
"
::= { hwDslamPppoeEchoUpportMonitorRecordEntry 6 }
hwDslamPppoeEchoUpportMonitorPppoeEchoReplyLastCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the last PPPoE Echo reply packet number received by the uplink port.
"
::= { hwDslamPppoeEchoUpportMonitorRecordEntry 7 }
hwDslamPppoeEchoUpportMonitorCount OBJECT IDENTIFIER ::= { hwDslamPppoeEchoUpportMonitor 6}
hwDslamPppoeEchoUpportMonitorPppoeEchoPreviousCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PPPoE Echo packet number received in the previous period by the uplink port.
"
::= { hwDslamPppoeEchoUpportMonitorCount 1 }
hwDslamPppoeEchoUpportMonitorPppoeEchoCurrentCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PPPoE Echo packet number received in the current period by the uplink port.
"
::= { hwDslamPppoeEchoUpportMonitorCount 2 }
hwDslamPppoeEchoUpportMonitorNotifySwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the PPPoE Echo monitoring notification function of the uplink port.
Options:
1. enable(1) - Indicates that the PPPoE Echo monitoring notification function of the uplink port is enabled.
2. disable(2) - Indicates that the PPPoE Echo monitoring notification function of the uplink port is disabled.
Default: disable(2)
"
::= { hwDslamPppoeEchoUpportMonitor 7 }
hwDslamPppoeEchoUpportMonitorActiveThreshold OBJECT-TYPE
SYNTAX Integer32 (10..10000)
UNITS "pps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the PPPoE Echo monitoring activation threshold for the uplink port.
Unit: pps
Default: 10
"
::= { hwDslamPppoeEchoUpportMonitor 8 }
hwDslamPppoeEchoUpportMonitorStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the PPPoE Echo monitoring start time for the uplink port.
The start time needs only the hour, minute, and second values,
and thus only the fifth, sixth, and seventh bytes are used, where,
the fifth byte indicates the hour value of the
start time, the sixth byte indicates the minute value,
and the seventh byte indicates the second value.
Other bytes are reserved and are filled in 0.
For example, if the start time is 08:30:00,
the value is presented as 0x00 0x00 0x00 0x00 0x08 0x1E 0x00 0x00.
The time must be from 00:00:00 to 23:59:59.
"
::= { hwDslamPppoeEchoUpportMonitor 9 }
hwDslamPppoeEchoUpportMonitorEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the PPPoE Echo monitoring end time for the uplink port.
The end time needs only the hour, minute, and second values,
and thus only the fifth, sixth, and seventh bytes are used, where,
the fifth byte indicates the hour value of the
start time, the sixth byte indicates the minute value,
and the seventh byte indicates the second value.
Other bytes are reserved and are filled in 0.
For example, if the start time is 08:30:00,
the value is presented as 0x00 0x00 0x00 0x00 0x08 0x1E 0x00 0x00.
The time must be from 00:00:00 to 23:59:59.
"
::= { hwDslamPppoeEchoUpportMonitor 10 }
hwDslamPppoeEchoUpportMonitorPeakRecordTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamPppoeEchoUpportMonitorPeakRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table recording the monitored peak PPPoE echo packets on the uplink port.
The index of this table is hwDslamPppoeEchoUpportMonitorPeakRecordIfIndex.
"
::= { hwDslamPppoeEchoUpportMonitor 11 }
hwDslamPppoeEchoUpportMonitorPeakRecordEntry OBJECT-TYPE
SYNTAX HwDslamPppoeEchoUpportMonitorPeakRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table recording the monitored peak PPPoE echo packets on the uplink port.
The index of this entry is hwDslamPppoeEchoUpportMonitorPeakRecordIfIndex.
"
INDEX { hwDslamPppoeEchoUpportMonitorPeakRecordIfIndex }
::= { hwDslamPppoeEchoUpportMonitorPeakRecordTable 1 }
HwDslamPppoeEchoUpportMonitorPeakRecordEntry ::=
SEQUENCE {
hwDslamPppoeEchoUpportMonitorPeakRecordIfIndex
Integer32,
hwDslamPppoeEchoUpportMonitorPeakRecordTime
DateAndTime,
hwDslamPppoeEchoUpportMonitorPeakPppoeEchoCount
Counter64
}
hwDslamPppoeEchoUpportMonitorPeakRecordIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the table recording the monitored peak PPPoE echo packets on the uplink port.
"
::= { hwDslamPppoeEchoUpportMonitorPeakRecordEntry 1 }
hwDslamPppoeEchoUpportMonitorPeakRecordTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the end time of peak PPPoE echo packet measurement.
"
::= { hwDslamPppoeEchoUpportMonitorPeakRecordEntry 2 }
hwDslamPppoeEchoUpportMonitorPeakPppoeEchoCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of peak PPPoE echo packets received on the uplink port.
"
::= { hwDslamPppoeEchoUpportMonitorPeakRecordEntry 3 }
hwPITPTraps OBJECT IDENTIFIER ::= { hwPITP 36 }
hwPITPAlarmTraps OBJECT IDENTIFIER ::= { hwPITPTraps 1 }
hwPITPAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwPITPAlarmTraps 0 }
hwDslamPppoeEchoUpportMonitorRecordTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwDslamPppoeEchoUpportMonitorPppoeEchoPreviousCount,
hwDslamPppoeEchoUpportMonitorPppoeEchoCurrentCount
}
STATUS current
DESCRIPTION
"The SNMP trap is generated when the number of reduced PPPoE Echo packets received by the uplink-port exceeds the threshold.
"
::= { hwPITPAlarmTraps 0 1 }
hwDslamAccessUserAbnormalMonitorRecordTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwDslamAccessUserAbnormalMonitorServiceFlowDialupCount,
hwDslamAccessUserAbnormalMonitorServiceFlowDialupAbnormalCount
}
STATUS current
DESCRIPTION
"The trap is generated when the number of users having abnormal dialup exceeds the threshold.
"
::= { hwPITPAlarmTraps 0 2 }
hwDslamAccessUserAbnormalMonitorRecordRestoreTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwDslamAccessUserAbnormalMonitorServiceFlowDialupCount,
hwDslamAccessUserAbnormalMonitorServiceFlowDialupAbnormalCount
}
STATUS current
DESCRIPTION
"The trap is generated when the number of users having abnormal dialup is lower than the threshold..
"
::= { hwPITPAlarmTraps 0 3 }
--
-- PPPOE & DCHP MONITOR statistics
--
hwDslamAccessUserAbnormalMonitor OBJECT IDENTIFIER ::= { hwPITP 37}
hwDslamAccessUserAbnormalMonitorPppoeSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the access user pppoe abnormal monitoring function.
Options:
1. enable(1) - Indicates that the access user pppoe abnormal monitor switch is enabled.
2. disable(2) - Indicates that the access user pppoe abnormal monitor switch is disabled.
Default: enable(1)
"
::= { hwDslamAccessUserAbnormalMonitor 1 }
hwDslamAccessUserAbnormalMonitorDhcpv4Switch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the access user DHCPv4 abnormal monitoring function.
Options:
1. enable(1) - Indicates that the access user DHCPv4 abnormal monitor switch is enabled.
2. disable(2) - Indicates that the access user DHCPv4 abnormal monitor switch is disabled.
Default: disable(2)
"
::= { hwDslamAccessUserAbnormalMonitor 2 }
hwDslamAccessUserAbnormalMonitorNotifySwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the access user pppoe or dhcpv4 abnormal monitoring notification function.
Options:
1. enable(1) - Indicates that the access user pppoe or dhcpv4 abnormal monitoring notification function is enabled.
2. disable(2) - Indicates that the access user pppoe or dhcpv4 abnormal monitoring notification function is disabled.
Default: disable(2)
"
::= { hwDslamAccessUserAbnormalMonitor 3 }
hwDslamAccessUserAbnormalMonitorThreshold OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the the access user pppoe or dhcpv4 abnormal monitoring threshold.
Unit: percent
Default: 30
"
::= { hwDslamAccessUserAbnormalMonitor 4 }
hwDslamAccessUserAbnormalMonitorActiveThreshold OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the access user pppoe or dhcpv4 abnormal monitoring active threshold.
Default: 10
"
::= { hwDslamAccessUserAbnormalMonitor 5 }
hwDslamAccessUserAbnormalMonitorPeriod OBJECT-TYPE
SYNTAX Integer32 (1..60)
UNITS "minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the pppoe or dhcpv4 abnormal monitoring period for the access user .
Unit: minute
Default: 20
"
::= { hwDslamAccessUserAbnormalMonitor 6 }
hwDslamAccessUserAbnormalMonitorLastRecordTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamAccessUserAbnormalMonitorLastRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of records in the last period which having abnormal dialup exceeds the threshold.
The indexes of this table are hwDslamAccessUserAbnormalMonitorLastRecordBrdFSIndex and hwDslamAccessUserAbnormalMonitorLastRecordServicePortIndex.
"
::= { hwDslamAccessUserAbnormalMonitor 7 }
hwDslamAccessUserAbnormalMonitorLastRecordEntry OBJECT-TYPE
SYNTAX HwDslamAccessUserAbnormalMonitorLastRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of records in the last period which having abnormal dialup exceeds the threshold.
The indexes of this entry are hwDslamAccessUserAbnormalMonitorLastRecordBrdFSIndex and hwDslamAccessUserAbnormalMonitorLastRecordServicePortIndex.
"
INDEX { hwDslamAccessUserAbnormalMonitorLastRecordBrdFSIndex, hwDslamAccessUserAbnormalMonitorLastRecordServicePortIndex }
::= { hwDslamAccessUserAbnormalMonitorLastRecordTable 1 }
HwDslamAccessUserAbnormalMonitorLastRecordEntry ::=
SEQUENCE {
hwDslamAccessUserAbnormalMonitorLastRecordBrdFSIndex Integer32,
hwDslamAccessUserAbnormalMonitorLastRecordServicePortIndex Unsigned32,
hwDslamAccessUserAbnormalMonitorLastRecordPppoePadiCount Unsigned32,
hwDslamAccessUserAbnormalMonitorLastRecordPppoePadoCount Unsigned32,
hwDslamAccessUserAbnormalMonitorLastRecordPppoePadrCount Unsigned32,
hwDslamAccessUserAbnormalMonitorLastRecordPppoePadsCount Unsigned32,
hwDslamAccessUserAbnormalMonitorLastRecordDhcpDiscoveryCount Unsigned32,
hwDslamAccessUserAbnormalMonitorLastRecordDhcpOfferCount Unsigned32,
hwDslamAccessUserAbnormalMonitorLastRecordDhcpRequestCount Unsigned32,
hwDslamAccessUserAbnormalMonitorLastRecordDhcpAckCount Unsigned32
}
hwDslamAccessUserAbnormalMonitorLastRecordBrdFSIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the InterfaceIndex of the monitoring slot in the last period.
"
::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 1 }
hwDslamAccessUserAbnormalMonitorLastRecordServicePortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the statistics on flow.
"
::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 2 }
hwDslamAccessUserAbnormalMonitorLastRecordPppoePadiCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PADI packet number received on flow in the last period.
"
::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 3 }
hwDslamAccessUserAbnormalMonitorLastRecordPppoePadoCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PADO packet number sended on flow in the last period.
"
::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 4 }
hwDslamAccessUserAbnormalMonitorLastRecordPppoePadrCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PADR packet number received on flow in the last period.
"
::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 5 }
hwDslamAccessUserAbnormalMonitorLastRecordPppoePadsCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PADS packet number received on flow in the last period.
"
::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 6 }
hwDslamAccessUserAbnormalMonitorLastRecordDhcpDiscoveryCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates DHCP discovery packet number received on flow in the last period.
"
::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 7}
hwDslamAccessUserAbnormalMonitorLastRecordDhcpOfferCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates DHCP Offer packet number received on flow in the last period.
"
::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 8 }
hwDslamAccessUserAbnormalMonitorLastRecordDhcpRequestCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates DHCP Request packet number received on flow in the last period.
"
::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 9 }
hwDslamAccessUserAbnormalMonitorLastRecordDhcpAckCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates DHCP Ack packet number received on flow in the last period.
"
::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 10 }
hwDslamAccessUserAbnormalMonitorCurrentRecordTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamAccessUserAbnormalMonitorCurrentRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of records for the access user pppoe and dhcpv4 abnormal in the current period.
The indexes of this table are hwDslamAccessUserAbnormalMonitorCurrentRecordBrdFSIndex and hwDslamAccessUserAbnormalMonitorCurrentRecordServicePortIndex.
"
::= { hwDslamAccessUserAbnormalMonitor 8 }
hwDslamAccessUserAbnormalMonitorCurrentRecordEntry OBJECT-TYPE
SYNTAX HwDslamAccessUserAbnormalMonitorCurrentRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of records for the access user pppoe and dhcpv4 abnormal in the current period.
The indexes of this entry are hwDslamAccessUserAbnormalMonitorCurrentRecordBrdFSIndex and hwDslamAccessUserAbnormalMonitorCurrentRecordServicePortIndex.
"
INDEX { hwDslamAccessUserAbnormalMonitorCurrentRecordBrdFSIndex, hwDslamAccessUserAbnormalMonitorCurrentRecordServicePortIndex }
::= { hwDslamAccessUserAbnormalMonitorCurrentRecordTable 1 }
HwDslamAccessUserAbnormalMonitorCurrentRecordEntry ::=
SEQUENCE {
hwDslamAccessUserAbnormalMonitorCurrentRecordBrdFSIndex Integer32,
hwDslamAccessUserAbnormalMonitorCurrentRecordServicePortIndex Unsigned32,
hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadiCount Unsigned32,
hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadoCount Unsigned32,
hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadrCount Unsigned32,
hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadsCount Unsigned32,
hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpDiscoveryCount Unsigned32,
hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpOfferCount Unsigned32,
hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpRequestCount Unsigned32,
hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpAckCount Unsigned32
}
hwDslamAccessUserAbnormalMonitorCurrentRecordBrdFSIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index of the monitoring slot in the current period.
"
::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 1 }
hwDslamAccessUserAbnormalMonitorCurrentRecordServicePortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the statistics on flow.
"
::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 2 }
hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadiCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PADI packet number received on flow in the current period.
"
::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 3 }
hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadoCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PADO packet number sended on flow in the current period.
"
::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 4 }
hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadrCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PADR packet number received on flow in the current period.
"
::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 5 }
hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadsCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates PADS packet number received on flow in the current period.
"
::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 6 }
hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpDiscoveryCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates DHCP discovery packet number received on flow in the current period.
"
::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 7}
hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpOfferCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates DHCP Offer packet number received on flow in the current period.
"
::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 8 }
hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpRequestCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates DHCP Request packet number received on flow in the current period.
"
::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 9 }
hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpAckCount OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates DHCP Ack packet number received on flow in the current period.
"
::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 10 }
hwDslamAccessUserAbnormalMonitorServiceFlowDialupCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of service flows through which dialup performed.
"
::= { hwDslamAccessUserAbnormalMonitor 9 }
hwDslamAccessUserAbnormalMonitorServiceFlowDialupAbnormalCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of service flows through which dialup is abnormal.
"
::= { hwDslamAccessUserAbnormalMonitor 10 }
hwDslamRaioAncpAggCidFormatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamRaioAncpAggCidFormatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the RAIO ANCP aggcid string.
The index of this table is hwDslamRaioAncpAggCidFormatType and hwDslamRaioAncpAggCidFormatIfType.
"
::= { hwPITP 38 }
hwDslamRaioAncpAggCidFormatEntry OBJECT-TYPE
SYNTAX HwDslamRaioAncpAggCidFormatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the RAIO ANCP aggcid string.
The index of this entry is hwDslamRaioAncpAggCidFormatType and hwDslamRaioAncpAggCidFormatIfType.
"
INDEX { hwDslamRaioAncpAggCidFormatType,hwDslamRaioAncpAggCidFormatIfType }
::= { hwDslamRaioAncpAggCidFormatTable 1 }
HwDslamRaioAncpAggCidFormatEntry ::=
SEQUENCE {
hwDslamRaioAncpAggCidFormatType
INTEGER,
hwDslamRaioAncpAggCidFormatIfType
INTEGER,
hwDslamNewRaioAncpAggCidFormatString
OCTET STRING
}
hwDslamRaioAncpAggCidFormatType OBJECT-TYPE
SYNTAX INTEGER {
aggCidAscii(1),
aggCidBinary(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the RAIO Ancp aggcid type. This leaf is an index.
Options:
1. aggCidAscii(1) -ascii
2. aggCidBinary(2) -binary
"
::= { hwDslamRaioAncpAggCidFormatEntry 1 }
hwDslamRaioAncpAggCidFormatIfType OBJECT-TYPE
SYNTAX INTEGER {
atm(1),
eth(2),
xponOnt(3),
xponMxu(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the prot type of the RAIO ancp string.
Options:
1. atm(1) -atm
2. eth(2) -eth
3. xponOnt(3) -xponOnt
4. xponMxu(4) -xponMxu "
::= { hwDslamRaioAncpAggCidFormatEntry 2 }
hwDslamNewRaioAncpAggCidFormatString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the parameters of RAIO ANCP aggcid string.
Range: a string of 0-127 characters..
"
::= { hwDslamRaioAncpAggCidFormatEntry 3 }
END
View Git Blame Copy Permalink