-- ============================================================================================================= -- Copyright (C) 2019 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: This MIB module defines Huawei's Policy Information Transfer Protocol (PITP) MIB objects. -- PITP is a member of the Huawei Group Management Protocol (HGMP) family, and provides the Broadband -- Remote Access Server (BRAS) with the information about the port of access users. PITP binds user -- accounts to the access ports together to prevent theft and roaming of user accounts. -- Reference: -- Version: V1.64 -- ============================================================================================================== HUAWEI-DSLAM-PITP-MIB DEFINITIONS ::= BEGIN IMPORTS hwFrameIndex, hwSlotIndex, hwPortIndex FROM HUAWEI-DEVICE-MIB huaweiUtility FROM HUAWEI-MIB ifIndex FROM IF-MIB Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, Integer32, Counter64, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue, RowStatus, DisplayString, DateAndTime FROM SNMPv2-TC; hwPITP MODULE-IDENTITY LAST-UPDATED "201901090000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "This MIB module defines Huawei's Policy Information Transfer Protocol (PITP) MIB objects. PITP is a member of the Huawei Group Management Protocol (HGMP) family, and provides the Broadband Remote Access Server (BRAS) with the information about the port of access users. PITP binds user accounts to the access ports together to prevent theft and roaming of user accounts." -- Revision history REVISION "201901090000Z" DESCRIPTION "V1.64, modified the description of hwDslamAccessUserAbnormalMonitorCurrentRecordEntry. " REVISION "201811160000Z" DESCRIPTION "V1.63, modified the description of hwDslamRaioSuboptionIndex. " REVISION "201807130000Z" DESCRIPTION "V1.62, added hwDslamRaioAncpAggCidFormatTable and hwDslamRaioAncpAggCidFormatEntry,hwDslamRaioAncpAggCidFormatType,hwDslamRaioAncpAggCidFormatIfType,hwDslamNewRaioAncpAggCidFormatString. " REVISION "201803210000Z" DESCRIPTION "V1.61, modified the description of hwDslamAccessUserAbnormalMonitorLastRecordTable and hwDslamAccessUserAbnormalMonitorCurrentRecordTable. " REVISION "201710200000Z" DESCRIPTION "V1.60, added hwDslamAccessUserAbnormalMonitorPppoeSwitch, hwDslamAccessUserAbnormalMonitorDhcpv4Switch, hwDslamAccessUserAbnormalMonitorNotifySwitch, hwDslamAccessUserAbnormalMonitorThreshold, hwDslamAccessUserAbnormalMonitorActiveThreshold, hwDslamAccessUserAbnormalMonitorPeriod, hwDslamAccessUserAbnormalMonitorLastRecordTable, hwDslamAccessUserAbnormalMonitorCurrentRecordTable, hwDslamAccessUserAbnormalMonitorDialupNumber, hwDslamAccessUserAbnormalMonitorDialupAbnormalNumber, hwDslamAccessUserAbnormalMonitorRecordTrap and hwDslamAccessUserAbnormalMonitorRecordRestoreTrap. " REVISION "201706080000Z" DESCRIPTION "V1.59, added hwDslamRaioSuboptionValueIftype. Modified the description of hwDslamRaioProtocolTypeIndex. " REVISION "201705120000Z" DESCRIPTION "V1.58, added hwDslamPppoeEchoUpportMonitorNotifySwitch, hwDslamPppoeEchoUpportMonitorActiveThreshold, hwDslamPppoeEchoUpportMonitorStartTime, hwDslamPppoeEchoUpportMonitorEndTime, hwDslamPppoeEchoUpportMonitorPppoeEchoRequestLastCount, hwDslamPppoeEchoUpportMonitorPppoeEchoReplyLastCount and hwDslamPppoeEchoUpportMonitorPeakRecordTable. Modified the default value of hwDslamPppoeEchoUpportMonitorSwitch. Modified the description of hwDslamPppoeEchoUpportMonitorPppoeEchoRequestCount, hwDslamPppoeEchoUpportMonitorPppoeEchoReplyCount, hwDslamPppoeEchoUpportMonitorPppoeEchoPreviousCount, hwDslamPppoeEchoUpportMonitorPppoeEchoCurrentCount and hwDslamPppoeEchoUpportMonitorRecordTrap. " REVISION "201703290000Z" DESCRIPTION "V1.57, modified the description of hwDslamPppoeEchoUpportMonitorPppoeEchoPreviousCount and hwDslamPppoeEchoUpportMonitorPppoeEchoCurrentCount." REVISION "201703070000Z" DESCRIPTION "V1.56, added hwDslamPppoeEchoUpportMonitor, hwDslamPppoeEchoUpportMonitorSwitch, hwDslamPppoeEchoUpportMonitorPeriod, hwDslamPppoeEchoUpportMonitorThreshold, hwDslamPppoeEchoUpportMonitorMemberTable, hwDslamPppoeEchoUpportMonitorRecordTable, hwPITPTraps. " REVISION "201609120000Z" DESCRIPTION "V1.55, added skb to hwDslamPITPRAIOMode, hwDslamDHCPOPTION82RAIOMode, hwDslamRAIOMode, hwDslamAncpRAIOMode, hwDslamDHCPv6OPTIONRAIOMode, hwDslamRaioProfilePitpRaioMode, hwDslamRaioProfileDhcpOption82RaioMode, hwDslamRaioProfileAncpRaioMode, hwDslamRaioProfileDhcpv6OptionRaioMode, hwDslamRaioProfileRadiusNasPortIdRaioMode and hwDslamRadiusNasPortIdRAIOMode. " REVISION "201607070000Z" DESCRIPTION "V1.54, added hwDslamRaioSuboptionValueTable.added hwDslamRaioSuboptionValueIndex.added hwDslamRaioSuboptionValue. " REVISION "201601200000Z" DESCRIPTION "V1.53, added hwDslamRaioSuboptionFastReport. " REVISION "201506010000Z" DESCRIPTION "V1.52, added radiusNasPortId(5) to hwDslamRAIOObject. Added hwDslamRadiusNasPortIdRAIOMode and hwDslamRaioProfileRadiusNasPortIdRaioMode. " REVISION "201503110000Z" DESCRIPTION "V1.51, deleted the table of hwDslamPITPPmodePortPvcTable." REVISION "201502020000Z" DESCRIPTION "V1.50, modified the description of hwDslamRaioProtocolTypeIndex. " REVISION "201412270000Z" DESCRIPTION "V1.49, added hwDslamRaioSuboptionActualDataRateType." REVISION "201409010000Z" DESCRIPTION "V1.48, modified the revision log of version 1.47. " REVISION "201408150000Z" DESCRIPTION "V1.47, modified the attributes of hwDslamPppoeFlowStatisticsRowStatus. " REVISION "201406100000Z" DESCRIPTION "V1.46, modified the enumerate of hwDslamPITPTransparentUserVlanType, modified hwDslamPITP to hwPITP. " REVISION "201401170000Z" DESCRIPTION "V1.45, added true(17) to hwDslamRaioProfilePitpRaioMode, hwDslamRaioProfileDhcpOption82RaioMode, hwDslamRaioProfileAncpRaioMode and hwDslamRaioProfileDhcpv6OptionRaioMode. " REVISION "201401100000Z" DESCRIPTION "V1.44, added hwDslamPITPTransparentUserVlanType and hwDslamPITPTransparentSingleUserVlanList." REVISION "201312200000Z" DESCRIPTION "V1.43, modified the description of hwDslamRAIOAncpAggCidFormatString." REVISION "201310230000Z" DESCRIPTION "V1.42, added true(17) to hwDslamPITPRAIOMode, hwDslamDHCPOPTION82RAIOMode, hwDslamRAIOMode, hwDslamAncpRAIOMode, hwDslamDHCPv6OPTIONRAIOMode." REVISION "201309110000Z" DESCRIPTION "V1.41, added hwDslamRaioDHCPv6Option17CableLabsSubSuboptionTable." REVISION "201307300000Z" DESCRIPTION "V1.40, added hwDslamRAIOAncpAggCidFormatString." REVISION "201305130000Z" DESCRIPTION "V1.39, added hwDslamRaioCableLabsSuboptionTable." REVISION "201301100000Z" DESCRIPTION "V1.38, The number of dashes used form comments was changed to two." REVISION "201211070000Z" DESCRIPTION "V1.37, modified description of hwDslamRAIORowStatus." REVISION "201205120000Z" DESCRIPTION "V1.36, added docsis(5) to hwDslamRAIOIfType." REVISION "201203140000Z" DESCRIPTION "V1.35, modified the value range of hwDslamPppoeFlowStatisticsIndex." REVISION "201112290000Z" DESCRIPTION "V1.34, added hwDslamPppoeReverse." REVISION "201109270000Z" DESCRIPTION "V1.33, added vnpt(16) to hwDslamDHCPv6OPTIONRAIOMode,hwDslamRaioProfilePitpRaioMode, hwDslamRaioProfileDhcpOption82RaioMode,hwDslamRaioProfileAncpRaioMode,hwDslamRaioProfileDhcpv6OptionRaioMode. " REVISION "201108120000Z" DESCRIPTION "V1.32, added vnpt(16) to hwDslamPITPRAIOMode,hwDslamDHCPOPTION82RAIOMode,hwDslamAncpRAIOMode and hwDslamRAIOMode. Modified the indication of hwDslamDHCPOPTION82RAIOMode,hwDslamAncpRAIOMode,hwDslamRaioProfileDhcpOption82RaioMode, hwDslamRaioProfileAncpRaioMode and hwDslamRaioProfileDhcpv6OptionRaioMode. " REVISION "201107290000Z" DESCRIPTION "V1.31, modified the description." REVISION "201102130000Z" DESCRIPTION "V1.30, added hwDslamPppoeFlowStatisticsTable. " REVISION "201101250000Z" DESCRIPTION "V1.29, changed hwDslamRaioProfileAccessNodeIp to hwDslamRaioProfileAccessNodeIpIfType and hwDslamRaioProfileAccessNodeIpIfNumber. Moved hwDslamRaioProfileAccessNodeId to a new position. " REVISION "201012150000Z" DESCRIPTION "V1.28, added hwDslamRaioProfileTable, hwDslamRaioProfileSuboptionTable and hwDslamRaioProfileFormatTable. " REVISION "201011260000Z" DESCRIPTION "V1.27, added dhcpv6Option(4) to hwDslamRAIOObject. Added hwDslamDHCPv6OPTIONRAIOMode and hwDslamRAIODhcpv6Option37EnterpriseNumber. " REVISION "201011170000Z" DESCRIPTION "V1.26, modified description of all leaves. Modified the value range of hwDslamRAIOIfType." REVISION "201011110000Z" DESCRIPTION "V1.25, added bbf(15) to hwDslamPITPRAIOMode,hwDslamDHCPOPTION82RAIOMode,hwDslamAncpRAIOMode and hwDslamRAIOMode. Added forwardPmode(4) and rebuildPmode(5) to hwDslamPITPStatus. " REVISION "201011090000Z" DESCRIPTION "V1.24, modified the description." REVISION "201010110000Z" DESCRIPTION "V1.23, modified the description." REVISION "201007100000Z" DESCRIPTION "V1.22, modified the description of hwDslamAccessNodeId and hwDslamAccessNodeIp. Modified the description of all enumerate values. " REVISION "201004250000Z" DESCRIPTION "V1.21, modified description of all leaves." REVISION "201003110000Z" DESCRIPTION "V1.20, modified enumeration format." REVISION "200910280000Z" DESCRIPTION "V1.16, added tm(14) to hwDslamPITPRAIOMode,hwDslamDHCPOPTION82RAIOMode and hwDslamRAIOMode." REVISION "200909100000Z" DESCRIPTION "V1.15, added cntelXpon to hwDslamPITPRAIOMode." REVISION "200407280900Z" DESCRIPTION "V1.00, initial version." ::= { huaweiUtility 42 } hwDslamPITPStatus OBJECT-TYPE SYNTAX INTEGER { disable(1), enableVmode(2), enablePmode(3), forwardPmode(4), rebuildPmode(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the status of the global PITP switch. Options: 1. disable(1) -indicates the global PITP switch is off 2. enableVmode(2) -indicates the global PITP switch is V mode 3. enablePmode(3) -indicates the global PITP switch is P mode 4. forwardPmode(4) -indicates not processing the vendor tag of the packet, but transparent it transmitted. Only for P mode 5. rebuildPmode(5) -indicates rebuild the vendor tag from the ONU device, to meet the TR-156 needs, only for P mode Default: disable(1) " ::= { hwPITP 1 } hwDslamPITPVmodeEtherType OBJECT-TYPE SYNTAX Unsigned32 (1536..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Ethernet protocol type of the PITP VBAS. Range: 1536-65535, that is, 0x600-0xFFFF Default: 33280(0x8200) Restrictions: If the value set to a protocol type is the same as any of other protocol types in the system, the setting fails. " ::= { hwPITP 2 } hwDslamPITPXdslPortRateInfoSwitch OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Xdsl port rate information switch, current support Adsl only. Options: 1. disable(1) -indicates the Xdsl port rate information switch is off 2. enable(2) -indicates Xdsl port rate information switch is on Default: disable(1) " ::= { hwPITP 3} hwDslamPITPCNTelSwitch OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Xdsl add BRAS information switch. Options: 1. disable(1) -indicates the Xdsl add BRAS information switch is off 2. enable(2) -indicates Xdsl add BRAS information switch is on Default: disable(1) " ::= { hwPITP 4} hwDslamPITPTITagSwitch OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "TI Add Dhcp && PITP Tag information switch Options: 1. disable(1) -indicates the TI Add Dhcp && PITP Tag information switch is off 2. enable(2) -indicates the TI Add Dhcp && PITP Tag information switch is on Default: disable(1) " ::= { hwPITP 5} hwDslamPITPRAIOMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16), true(17), skb(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the RAIO mode of PPPoE plus/VBAS. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf 6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel 7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of PPPoE plus/VBAS is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of PPPoE plus/VBAS is dslForumDefault 10. brt(10) -indicates the RAIO mode of PPPoE plus/VBAS is brt 11. userDefined(11) -indicates the RAIO mode of PPPoE plus/VBAS is user defined 12. ft(12) -indicates the RAIO mode of PPPoE plus/VBAS is ft 13. cntelXpon(13) -indicates the RAIO mode of PPPoE plus/VBAS is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of PPPoE plus/VBAS is tm 15. bbf(15) -indicates the RAIO mode of PPPoE plus is bbf 16. vnpt(16) -indicates the RAIO mode of PPPoE plus is vnpt 17. true(17) -indicates the RAIO mode of PPPoE plus is true 18. skb(18) -indicates the RAIO mode of PPPoE plus is skb Default: common(1) Restrictions: bt(7) and skb(18) are not supported. The VBAS supports only common(1), cntel(3), and userDefined(11). When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable. " ::= { hwPITP 6} hwDslamPITPPMODERAIOMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), bbf(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "RAIO(Relay agent info Option) mode of PITP pmode. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf 6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel 7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt 8. bbf(15) -indicates the RAIO mode of PPPoE plus is bbf Default: common(1) " ::= { hwPITP 7} hwDslamPITPVMODERAIOMode OBJECT-TYPE SYNTAX INTEGER { common(1), cntel(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "RAIO(Relay agent info Option) mode of PITP vmode. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS Default: common(1) " ::= { hwPITP 8} hwDslamDHCPOPTION82RAIOMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16), true(17), skb(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the RAIO mode of DHCP Option82. Options: 1. common(1) -indicates the RAIO mode of DHCP Option82 is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCP Option82 is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCP Option82 is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCP Option82 is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCP Option82 is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCP Option82 is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCP Option82 is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCP Option82 is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCP Option82 is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCP Option82 is brt 11. userDefined(11) -indicates the RAIO mode of DHCP Option82 is user defined 12. ft(12) -indicates the RAIO mode of DHCP Option82 is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCP Option82 is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCP Option82 is tm 15. bbf(15) -indicates the RAIO mode of DHCP Option82 is bbf 16. vnpt(16) -indicates the RAIO mode of DHCP Option82 is vnpt 17. true(17) -indicates the RAIO mode of DHCP Option82 is true 18. skb(18) -indicates the RAIO mode of DHCP Option82 is skb Default: common(1) Restrictions: bt(7) is not supported. When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable. " ::= { hwPITP 9} hwDslamRAIOFormatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamRAIOFormatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for querying the RAIO format; supports the setting of only the user-defined mode. The indexes of this table are hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode and hwDslamRAIOIfType. " ::= { hwPITP 10 } hwDslamRAIOFormatEntry OBJECT-TYPE SYNTAX HwDslamRAIOFormatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for querying the RAIO format; supports the setting of only the user-defined mode. The indexes of this entry are hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode and hwDslamRAIOIfType. " INDEX { hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode, hwDslamRAIOIfType } ::= { hwDslamRAIOFormatTable 1 } HwDslamRAIOFormatEntry ::= SEQUENCE { hwDslamRAIOObject INTEGER, hwDslamRAIOIdPara INTEGER, hwDslamRAIOMode INTEGER, hwDslamRAIOIfType INTEGER, hwDslamRAIOFormatString OCTET STRING, hwDslamRAIORowStatus RowStatus } hwDslamRAIOObject OBJECT-TYPE SYNTAX INTEGER { pitp(1), dhcpOption82(2), ancp(3), dhcpv6Option(4), radiusNasPortId(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the RAIO object. This leaf is an index. Options: 1. pitp(1) -indicates the RAIO object is pitp 2. dhcpOption82(2) -indicates the RAIO object is dhcpOption82 3. ancp(3) -indicates the RAIO object is ancp 4. dhcpv6Option(4) -indicates the RAIO object is dhcpv6Option 5. radiusNasPortId(5) -indicates the RAIO object is radiusNasPortId " ::= { hwDslamRAIOFormatEntry 1 } hwDslamRAIOIdPara OBJECT-TYPE SYNTAX INTEGER { cid(1), rid(2), info(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the RAIO ID parameter. This leaf is an index. Options: 1. cid(1) -indicates the RAIO object is cid 2. rid(2) -indicates the RAIO object is rid 3. info(3) -indicates the RAIO object is info " ::= { hwDslamRAIOFormatEntry 2 } hwDslamRAIOMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16), true(17), skb(18) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode is common 2. xdslPortRate(2) -indicates the RAIO mode is Xdsl port rate 3. cntel(3) -indicates the RAIO mode is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode is neuf 6. portUserLabel(6) -indicates the RAIO mode is portUserLabel 7. bt(7) -indicates the RAIO mode is bt 8. servicePortUserLabel(8) -indicates the RAIO mode is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode is dslForumDefault 10. brt(10) -indicates the RAIO mode is brt 11. userDefined(11) -indicates the RAIO mode is user defined 12. ft(12) -indicates the RAIO mode is ft 13. cntelXpon(13) -indicates the RAIO mode is Xpon add BRAS 14. tm(14) -indicates the RAIO mode is tm 15. bbf(15) -indicates the RAIO mode is bbf 16. vnpt(16) -indicates the RAIO mode is vnpt 17. true(17) -indicates the RAIO mode is true 18. skb(18) -indicates the RAIO mode is skb Default: common(1) Restrictions: bt(7) and skb(18) are not supported. The VBAS supports only common(1), cntel(3), and userDefined(11). " ::= { hwDslamRAIOFormatEntry 3 } hwDslamRAIOIfType OBJECT-TYPE SYNTAX INTEGER { atm(1), eth(2), xpon(3), eoc(4), docsis(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface type. Options: 1. atm(1) -atm interface type 2. eth(2) -eth interface type 3. xpon(3) -xpon interface type 4. eoc(4) -eoc interface type 5. docsis(5) -docsis interface type For the ATM access mode (the ATM mode of xDSL boards), the value of this leaf is atm(1); for the Ethernet access mode (the PTM mode of the OPFA board and xDSL boards), the value of this leaf is eth(2); for the xPON access mode, the value of this leaf is xpon(3); for the EOC access mode, the value of this leaf is eoc(4); for the docsis access mode, the value of this leaf is docsis(5). " ::= { hwDslamRAIOFormatEntry 4 } hwDslamRAIOFormatString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the character string of the RAIO format. Range: a string of 0-255 characters. " ::= { hwDslamRAIOFormatEntry 5 } hwDslamRAIORowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the row status, used for deleting the RAIO format. Options active(1), createAndGo(4) and destroy(6) are supported. Currently, this leaf does not support the create and query operations. To modify the RAIO format, you need not bind the row status. To delete the RAIO format, you must input hwDslamRAIORowStatus. " DEFVAL { active } ::= { hwDslamRAIOFormatEntry 6} hwDslamPITPPmodePortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamPITPPmodePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PITP pmode of port management table. The index of this table is ifIndex. " ::= { hwPITP 12 } hwDslamPITPPmodePortEntry OBJECT-TYPE SYNTAX HwDslamPITPPmodePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PITP pmode of port management table. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDslamPITPPmodePortTable 1 } HwDslamPITPPmodePortEntry ::= SEQUENCE { hwDslamPITPPmodePortAdminStatus TruthValue, hwDslamPITPPmodePortUplinkStatus TruthValue, hwDslamPITPPmodePortRowStatus RowStatus } hwDslamPITPPmodePortAdminStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "PITP pmode of port administer state. Options: true(enable), false(disable) Default: false " DEFVAL { false } ::= { hwDslamPITPPmodePortEntry 1 } hwDslamPITPPmodePortUplinkStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Up-link administer state. Only a port on main board can be an up-link. Options: true(yes), false(no), Default: true " ::= { hwDslamPITPPmodePortEntry 2 } hwDslamPITPPmodePortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status. Add or delete a table item. " ::= { hwDslamPITPPmodePortEntry 3 } hwDslamPITPPmodeSuboption90Status OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates PPPoE plus Suboption90. Options: 1. true(1) -indicates PPPoE plus Suboption90 is enable 2. false(2) -indicates PPPoE plus Suboption90 is disable Default: false(2) Restrictions: The operation on this leaf takes effect in the PPPoE plus mode only. " ::= { hwPITP 13 } hwDslamPITPPmodeSuboptionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamPITPPmodeSuboptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PITP pmode suboption table. The index of this table is hwDslamPITPPmodeSuboptionIndex. " ::= { hwPITP 14 } hwDslamPITPPmodeSuboptionEntry OBJECT-TYPE SYNTAX HwDslamPITPPmodeSuboptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PITP pmode suboption table. The index of this entry is hwDslamPITPPmodeSuboptionIndex. " INDEX { hwDslamPITPPmodeSuboptionIndex } ::= { hwDslamPITPPmodeSuboptionTable 1 } HwDslamPITPPmodeSuboptionEntry ::= SEQUENCE { hwDslamPITPPmodeSuboptionIndex Integer32, hwDslamPITPPmodeSuboptionStatus TruthValue } hwDslamPITPPmodeSuboptionIndex OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "the index of PITP pmode suboption: -index 1 stand for suboption 0x81; -index 2 stand for suboption 0x82; -index 3 stand for suboption 0x83; -index 4 stand for suboption 0x84; -index 5 stand for suboption 0x85; -index 6 stand for suboption 0x86; -index 7 stand for suboption 0x87; -index 8 stand for suboption 0x88; -index 9 stand for suboption 0x89; -index 10 stand for suboption 0x8a; -index 11 stand for suboption 0x8b; -index 12 stand for suboption 0x8c; -index 13 stand for suboption 0x8d; -index 14 stand for suboption 0x8e; -index 15 stand for suboption 0x90; DEFVAL { 1 } " ::= { hwDslamPITPPmodeSuboptionEntry 1 } hwDslamPITPPmodeSuboptionStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration of PITP pmode suboption. Options: true(enable), false(disable) Default: false " DEFVAL { 2 } ::= { hwDslamPITPPmodeSuboptionEntry 2 } hwDslamRaioSuboptionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamRaioSuboptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for setting and querying RAIO suboptions. The indexes of this table are hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex. " ::= { hwPITP 15 } hwDslamRaioSuboptionEntry OBJECT-TYPE SYNTAX HwDslamRaioSuboptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for setting and querying RAIO suboptions. The indexes of this entry are hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex. " INDEX { hwDslamRaioProtocolTypeIndex, hwDslamRaioSuboptionIndex } ::= { hwDslamRaioSuboptionTable 1 } HwDslamRaioSuboptionEntry ::= SEQUENCE { hwDslamRaioProtocolTypeIndex Integer32, hwDslamRaioSuboptionIndex Integer32, hwDslamRaioSuboptionStatus INTEGER } hwDslamRaioProtocolTypeIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the protocol type supporting RAIO suboptions. This leaf is an index. Range: 1-255 The value 1 indicates DHCP Option82, 2 indicates PPPoE plus, 3 indicates DHCPv6 Option17, 4 indicates ANCP, and 5-255 are reserved. " ::= { hwDslamRaioSuboptionEntry 1 } hwDslamRaioSuboptionIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the RAIO suboption. This leaf is an index. Range: 1-255 1-17 correspond to suboptions 0x81-0x91. 18 correspond to suboptions 0x92. 20-21 correspond to suboptions 0x94-0x95. 23-24 correspond to suboptions 0x97-0x98. " ::= { hwDslamRaioSuboptionEntry 2 } hwDslamRaioSuboptionStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the status of the RAIO suboption. Options: 1. enable(1) -indicates the RAIO suboption is enable 2. disable(2) -indicates the RAIO suboption is disable Default: disable(2) " ::= { hwDslamRaioSuboptionEntry 3 } hwDslamAccessNodeId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ANID. Range: a string of 0-50 characters Restrictions: This leaf does not support the create operation, and supports only the modify and query operations. To cancel the settings of the ANID, you can directly perform the set operation without inputting a leaf value. " ::= { hwPITP 16 } hwDslamAccessNodeIp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the L3 interface in the ANIP field. Currently, the device management IP address is used as the device identifier. The value of the device management IP address is obtained through the VLAN L3 interface specified by hwDslamAccessNodeIp. Range: 0-4294967295 Restrictions: This leaf does not support the create operation, and supports only the modify and query operations. To cancel the settings of the ANIP, input leaf value 4294967295 (equaling 0xFFFFFFFF) and perform the set operation. " ::= { hwPITP 17 } -- -- ANCP RAIO mode -- hwDslamAncpRAIOMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16), true(17), skb(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "RAIO(Relay agent info Option) mode of ANCP. Options: 1. common(1) -indicates the RAIO mode of ANCP is common 2. xdslPortRate(2) -indicates the RAIO mode of ANCP is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of ANCP is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of ANCP is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of ANCP is neuf 6. portUserLabel(6) -indicates the RAIO mode of ANCP is portUserLabel 7. bt(7) -indicates the RAIO mode of ANCP is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of ANCP is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of ANCP is dslForumDefault 10. brt(10) -indicates the RAIO mode of ANCP is brt 11. userDefined(11) -indicates the RAIO mode of ANCP is user defined 12. ft(12) -indicates the RAIO mode of ANCP is ft 13. cntelXpon(13) -indicates the RAIO mode of ANCP is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of ANCP is tm 15. bbf(15) -indicates the RAIO mode of ANCP is bbf 16. vnpt(16) -indicates the RAIO mode of ANCP is vnpt 17. true(17) -indicates the RAIO mode of ANCP is true 18. skb(18) -indicates the RAIO mode of ANCP is skb Default: dslForumDefault(9) Restrictions: bt(7) and skb(18) are not supported. " ::= { hwPITP 18} -- -- DHCPv6Option RAIO mode -- hwDslamDHCPv6OPTIONRAIOMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16), true(17), skb(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the RAIO mode of DHCPv6 Option. Options: 1. common(1) -indicates the RAIO mode of DHCPv6 option is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCPv6 option is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCPv6 option is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCPv6 option is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCPv6 option is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCPv6 option is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCPv6 option is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCPv6 option is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCPv6 option is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCPv6 option is brt 11. userDefined(11) -indicates the RAIO mode of DHCPv6 option is user defined 12. ft(12) -indicates the RAIO mode of DHCPv6 option is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCPv6 option is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCPv6 option is tm 15. bbf(15) -indicates the RAIO mode of DHCPv6 option is bbf 16. vnpt(16) -indicates the RAIO mode of DHCPv6 option is vnpt 17. true(17) -indicates the RAIO mode of DHCPv6 option is true 18. skb(18) -indicates the RAIO mode of DHCPv6 option is skb Default: common(1) Restrictions: bt(7) and skb(18) are not supported. When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable. " ::= { hwPITP 19} -- -- Enterprise number -- hwDslamRAIODhcpv6Option37EnterpriseNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the enterprise number which is used in DHCPv6 option 37. Range: 0-4294967295 DEFVAL {2011} " ::= { hwPITP 20} -- -- RAIO profile -- hwDslamRaioProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamRaioProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for creating, setting and querying RAIO profiles. The index of this table is hwDslamRaioProfileName. " ::= { hwPITP 21 } hwDslamRaioProfileEntry OBJECT-TYPE SYNTAX HwDslamRaioProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for creating, setting and querying RAIO profiles. The index of this entry is hwDslamRaioProfileName. " INDEX { hwDslamRaioProfileName } ::= { hwDslamRaioProfileTable 1 } HwDslamRaioProfileEntry ::= SEQUENCE { hwDslamRaioProfileName OCTET STRING, hwDslamRaioProfileAccessNodeIpIfType INTEGER, hwDslamRaioProfileAccessNodeIpIfNumber Integer32, hwDslamRaioProfilePitpRaioMode INTEGER, hwDslamRaioProfileDhcpOption82RaioMode INTEGER, hwDslamRaioProfileAncpRaioMode INTEGER, hwDslamRaioProfileDhcpv6OptionRaioMode INTEGER, hwDslamRaioProfileDhcpv6Option37EnterpriseNumber Unsigned32, hwDslamRaioProfileAccessNodeId OCTET STRING, hwDslamRaioProfileRowStatus RowStatus, hwDslamRaioProfileRadiusNasPortIdRaioMode INTEGER } hwDslamRaioProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "RAIO profile name. Range: a string of 1-32 characters " ::= { hwDslamRaioProfileEntry 1 } hwDslamRaioProfileAccessNodeIpIfType OBJECT-TYPE SYNTAX INTEGER { notConfiged(1), meth(2), loopback(3), vlanif(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interface type. Options: 1. notConfiged(1) -indicates that no source interface is configured 2. meth(2) -indicates the MEth interface 3. loopback(3) -indicates the loopback interface 4. vlanif(4) -indicates the VLAN interface When this leaf is set to notConfiged(1), it means that no source interface is configured in the case of the create operation, and that the source interface is deleted in the case of the modify operation. " ::= { hwDslamRaioProfileEntry 2 } hwDslamRaioProfileAccessNodeIpIfNumber OBJECT-TYPE SYNTAX Integer32 (0..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interface ID. Range: 0-4093 Range for the MEth interface: 0 Range for the loopback interface: 0-31 Range for the VLAN interface: 1-4093 The interface ID and interface type together identify an interface. " ::= { hwDslamRaioProfileEntry 3 } hwDslamRaioProfilePitpRaioMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16), true(17), skb(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf 6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel 7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of PPPoE plus/VBAS is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of PPPoE plus/VBAS is dslForumDefault 10. brt(10) -indicates the RAIO mode of PPPoE plus/VBAS is brt 11. userDefined(11) -indicates the RAIO mode of PPPoE plus/VBAS is user defined 12. ft(12) -indicates the RAIO mode of PPPoE plus/VBAS is ft 13. cntelXpon(13) -indicates the RAIO mode of PPPoE plus/VBAS is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of PPPoE plus/VBAS is tm 15. bbf(15) -indicates the RAIO mode of PPPoE plus/VBAS is bbf 16. vnpt(16) -indicates the RAIO mode of PPPoE plus/VBAS is vnpt 17. true(17) -indicates the RAIO mode of PPPoE plus/VBAS is true 18. skb(18) -indicates the RAIO mode of PPPoE plus/VBAS is skb Default: common(1) Restrictions: bt(7) and skb(18) are not supported. The VBAS supports only common(1), cntel(3), and userDefined(11). " ::= { hwDslamRaioProfileEntry 4 } hwDslamRaioProfileDhcpOption82RaioMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16), true(17), skb(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of DHCP Option82 is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCP Option82 is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCP Option82 is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCP Option82 is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCP Option82 is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCP Option82 is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCP Option82 is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCP Option82 is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCP Option82 is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCP Option82 is brt 11. userDefined(11) -indicates the RAIO mode of DHCP Option82 is user defined 12. ft(12) -indicates the RAIO mode of DHCP Option82 is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCP Option82 is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCP Option82 is tm 15. bbf(15) -indicates the RAIO mode of DHCP Option82 is bbf 16. vnpt(16) -indicates the RAIO mode of DHCP Option82 is vnpt 17. true(17) -indicates the RAIO mode of DHCP Option82 is true 18. skb(18) -indicates the RAIO mode of DHCP Option82 is skb Default: common(1) Restrictions: bt(7) is not supported. " ::= { hwDslamRaioProfileEntry 5 } hwDslamRaioProfileAncpRaioMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16), true(17), skb(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of ANCP is common 2. xdslPortRate(2) -indicates the RAIO mode of ANCP is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of ANCP is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of ANCP is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of ANCP is neuf 6. portUserLabel(6) -indicates the RAIO mode of ANCP is portUserLabel 7. bt(7) -indicates the RAIO mode of ANCP is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of ANCP is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of ANCP is dslForumDefault 10. brt(10) -indicates the RAIO mode of ANCP is brt 11. userDefined(11) -indicates the RAIO mode of ANCP is user defined 12. ft(12) -indicates the RAIO mode of ANCP is ft 13. cntelXpon(13) -indicates the RAIO mode of ANCP is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of ANCP is tm 15. bbf(15) -indicates the RAIO mode of ANCP is bbf 16. vnpt(16) -indicates the RAIO mode of ANCP is vnpt 17. true(17) -indicates the RAIO mode of ANCP is true 18. skb(18) -indicates the RAIO mode of ANCP is skb Default: dslForumDefault(9) Restrictions: bt(7) and skb(18) are not supported. " ::= { hwDslamRaioProfileEntry 6 } hwDslamRaioProfileDhcpv6OptionRaioMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16), true(17), skb(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of DHCPv6 is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCPv6 is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCPv6 is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCPv6 is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCPv6 is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCPv6 is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCPv6 is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCPv6 is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCPv6 is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCPv6 is brt 11. userDefined(11) -indicates the RAIO mode of DHCPv6 is user defined 12. ft(12) -indicates the RAIO mode of DHCPv6 is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCPv6 is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCPv6 is tm 15. bbf(15) -indicates the RAIO mode of DHCPv6 is bbf 16. vnpt(16) -indicates the RAIO mode of DHCPv6 is vnpt 17. true(17) -indicates the RAIO mode of DHCPv6 is true 18. skb(18) -indicates the RAIO mode of DHCPv6 is skb Default: common(1) Restrictions: bt(7) and skb(18) are not supported. " ::= { hwDslamRaioProfileEntry 7 } hwDslamRaioProfileDhcpv6Option37EnterpriseNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the enterprise number which is used in DHCPv6 option 37. Range: 0-4294967295 " DEFVAL { 2011 } ::= { hwDslamRaioProfileEntry 8 } hwDslamRaioProfileAccessNodeId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ANID. Range: a string of 0-50 characters Restrictions: " ::= { hwDslamRaioProfileEntry 9 } hwDslamRaioProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the row status, used for creating and deleting the RAIO profile. Options createAndGo(4) and destroy(6) are supported. Currently, to modify the RAIO profile, you need not bind the row status. To delete the RAIO profile, you must input hwDslamRaioProfileRowStatus. " DEFVAL { active } ::= { hwDslamRaioProfileEntry 10 } hwDslamRaioProfileRadiusNasPortIdRaioMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16), true(17), skb(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the RAIO mode of RADIUS NAS-Port-Id. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of RADIUS NAS-Port-Id is common 2. xdslPortRate(2) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of RADIUS NAS-Port-Id is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of RADIUS NAS-Port-Id is neuf 6. portUserLabel(6) -indicates the RAIO mode of RADIUS NAS-Port-Id is portUserLabel 7. bt(7) -indicates the RAIO mode of RADIUS NAS-Port-Id is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of RADIUS NAS-Port-Id is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of RADIUS NAS-Port-Id is dslForumDefault 10. brt(10) -indicates the RAIO mode of RADIUS NAS-Port-Id is brt 11. userDefined(11) -indicates the RAIO mode of RADIUS NAS-Port-Id is user defined 12. ft(12) -indicates the RAIO mode of RADIUS NAS-Port-Id is ft 13. cntelXpon(13) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of RADIUS NAS-Port-Id is tm 15. bbf(15) -indicates the RAIO mode of RADIUS NAS-Port-Id is bbf 16. vnpt(16) -indicates the RAIO mode of RADIUS NAS-Port-Id is vnpt 17. true(17) -indicates the RAIO mode of RADIUS NAS-Port-Id is true 18. skb(18) -indicates the RAIO mode of RADIUS NAS-Port-Id is skb Default: common(1) Restrictions: bt(7) and skb(18) are not supported. " ::= { hwDslamRaioProfileEntry 11 } -- -- RAIO profile suboption -- hwDslamRaioProfileSuboptionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamRaioProfileSuboptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for setting and querying the RAIO suboption state of the RAIO profile. The indexes of this table are hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex. " ::= { hwPITP 22 } hwDslamRaioProfileSuboptionEntry OBJECT-TYPE SYNTAX HwDslamRaioProfileSuboptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for setting and querying the RAIO suboption state of the RAIO profile. The indexes of this entry are hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex. " INDEX { hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex, hwDslamRaioSuboptionIndex } ::= { hwDslamRaioProfileSuboptionTable 1 } HwDslamRaioProfileSuboptionEntry ::= SEQUENCE { hwDslamRaioProfileSuboptionStatus INTEGER } hwDslamRaioProfileSuboptionStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the status of the RAIO suboption. Options: 1. enable(1) -indicates the RAIO suboption is enable 2. disable(2) -indicates the RAIO suboption is disable Default: disable(2) " ::= { hwDslamRaioProfileSuboptionEntry 1 } -- -- RAIO profile format -- hwDslamRaioProfileFormatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamRaioProfileFormatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for querying the RAIO format of the RAIO profile; supports the setting of only the user-defined mode. The indexes of this table are hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode, and hwDslamRAIOIfType. " ::= { hwPITP 23 } hwDslamRaioProfileFormatEntry OBJECT-TYPE SYNTAX HwDslamRaioProfileFormatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for querying the RAIO format of the RAIO profile; supports the setting of only the user-defined mode. The indexes of this entry are hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode, and hwDslamRAIOIfType. " INDEX { hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode, hwDslamRAIOIfType } ::= { hwDslamRaioProfileFormatTable 1 } HwDslamRaioProfileFormatEntry ::= SEQUENCE { hwDslamRaioProfileFormatString OCTET STRING } hwDslamRaioProfileFormatString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the character string of the RAIO format. Range: a string of 0-255 characters. " ::= { hwDslamRaioProfileFormatEntry 1 } -- -- PPPOEPLUS statistics service-port -- hwDslamPppoeFlowStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamPppoeFlowStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for querying and resetting the pppoeplus statistics on flow. The index of this table is hwDslamPppoeFlowStatisticsIndex. Statistics for a maximum of 64 service ports are supported. " ::= { hwPITP 24 } hwDslamPppoeFlowStatisticsEntry OBJECT-TYPE SYNTAX HwDslamPppoeFlowStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for querying and resetting the pppoeplus statistics on flow. The index of this entry is hwDslamPppoeFlowStatisticsIndex. Statistics for a maximum of 64 service ports are supported. " INDEX { hwDslamPppoeFlowStatisticsIndex } ::= { hwDslamPppoeFlowStatisticsTable 1 } HwDslamPppoeFlowStatisticsEntry ::= SEQUENCE { hwDslamPppoeFlowStatisticsIndex Unsigned32, hwDslamPppoeFlowStatisticsRowStatus RowStatus, hwDslamPppoeFlowStatisticsOperMode INTEGER, hwDslamPppoeFlowStatisticsReceivePadi Unsigned32, hwDslamPppoeFlowStatisticsReceivePado Unsigned32, hwDslamPppoeFlowStatisticsReceivePadr Unsigned32, hwDslamPppoeFlowStatisticsReceivePads Unsigned32, hwDslamPppoeFlowStatisticsReceivePadt Unsigned32, hwDslamPppoeFlowStatisticsSendPadi Unsigned32, hwDslamPppoeFlowStatisticsSendPado Unsigned32, hwDslamPppoeFlowStatisticsSendPadr Unsigned32, hwDslamPppoeFlowStatisticsSendPads Unsigned32, hwDslamPppoeFlowStatisticsSendPadt Unsigned32, hwDslamPppoeFlowStatisticsTagTooLong Unsigned32, hwDslamPppoeFlowStatisticsFrameTooLong Unsigned32, hwDslamPppoeFlowStatisticsReceiveUntrusted Unsigned32, hwDslamPppoeFlowStatisticsReceiveUnknownType Unsigned32 } hwDslamPppoeFlowStatisticsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the PPPoE statistics on flow. " ::= { hwDslamPppoeFlowStatisticsEntry 1 } hwDslamPppoeFlowStatisticsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The present operation status of the row. CreateAndGo(4) means enable the PPPoE statistics on flow. Destroy(6) means disable the PPPoE statistics on flow. Active(1) will be returned in the get operation. " ::= { hwDslamPppoeFlowStatisticsEntry 2 } hwDslamPppoeFlowStatisticsOperMode OBJECT-TYPE SYNTAX INTEGER { reset(1), invalid(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates reset the PPPoE statistics on flow. Options: 1. reset(1) -In the set operation, reset the PPPoE statistics on flow. 2. invalid(2) -In the get operation, the invalid value 2 is returned. Default: invalid(2) " ::= { hwDslamPppoeFlowStatisticsEntry 3 } hwDslamPppoeFlowStatisticsReceivePadi OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received PADI packets. " ::= { hwDslamPppoeFlowStatisticsEntry 4 } hwDslamPppoeFlowStatisticsReceivePado OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received PADO packets. " ::= { hwDslamPppoeFlowStatisticsEntry 5 } hwDslamPppoeFlowStatisticsReceivePadr OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received PADR packets. " ::= { hwDslamPppoeFlowStatisticsEntry 6 } hwDslamPppoeFlowStatisticsReceivePads OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received PADS packets. " ::= { hwDslamPppoeFlowStatisticsEntry 7 } hwDslamPppoeFlowStatisticsReceivePadt OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received PADT packets. " ::= { hwDslamPppoeFlowStatisticsEntry 8 } hwDslamPppoeFlowStatisticsSendPadi OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sent PADI packets. " ::= { hwDslamPppoeFlowStatisticsEntry 9 } hwDslamPppoeFlowStatisticsSendPado OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sent PADO packets. " ::= { hwDslamPppoeFlowStatisticsEntry 10 } hwDslamPppoeFlowStatisticsSendPadr OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sent PADR packets. " ::= { hwDslamPppoeFlowStatisticsEntry 11 } hwDslamPppoeFlowStatisticsSendPads OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sent PADS packets. " ::= { hwDslamPppoeFlowStatisticsEntry 12 } hwDslamPppoeFlowStatisticsSendPadt OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sent PADT packets. " ::= { hwDslamPppoeFlowStatisticsEntry 13 } hwDslamPppoeFlowStatisticsTagTooLong OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets exceed the maximum tag size. " ::= { hwDslamPppoeFlowStatisticsEntry 14 } hwDslamPppoeFlowStatisticsFrameTooLong OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets exceed the maximum packet size. " ::= { hwDslamPppoeFlowStatisticsEntry 15 } hwDslamPppoeFlowStatisticsReceiveUntrusted OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received packets with untrusted tag. " ::= { hwDslamPppoeFlowStatisticsEntry 16 } hwDslamPppoeFlowStatisticsReceiveUnknownType OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received packets with unknown type. " ::= { hwDslamPppoeFlowStatisticsEntry 17 } hwDslamPppoeReverse OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the status of the global reverse PPPoE packets switch. Options: 1. enable(1) -indicates the reverse PPPoE packets are forwarded 2. disable(2) -indicates the reverse PPPoE packets are dropped Default: disable(2) " ::= { hwPITP 25 } hwDslamRaioCableLabsSuboptionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamRaioCableLabsSuboptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for setting and querying the RAIO CableLabs suboption. The index of this table is hwDslamRaioCableLabsSuboptionIndex. " ::= { hwPITP 26 } hwDslamRaioCableLabsSuboptionEntry OBJECT-TYPE SYNTAX HwDslamRaioCableLabsSuboptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for setting and querying the RAIO CableLabs suboption. The index of this entry is hwDslamRaioCableLabsSuboptionIndex. " INDEX { hwDslamRaioCableLabsSuboptionIndex } ::= { hwDslamRaioCableLabsSuboptionTable 1 } HwDslamRaioCableLabsSuboptionEntry ::= SEQUENCE { hwDslamRaioCableLabsSuboptionIndex INTEGER, hwDslamRaioCableLabsSuboptionStatus INTEGER, hwDslamRaioCableLabsSuboptionPara OCTET STRING } hwDslamRaioCableLabsSuboptionIndex OBJECT-TYPE SYNTAX INTEGER { docsisversion(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the RAIO CableLabs suboption. This leaf is an index. Options: 1. docsisversion(1) -indicates the DOCSIS version suboption " ::= { hwDslamRaioCableLabsSuboptionEntry 1 } hwDslamRaioCableLabsSuboptionStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the status of the RAIO CableLabs suboption. Options: 1. enable(1) -indicates the RAIO CableLabs suboption is enable 2. disable(2) -indicates the RAIO CableLabs suboption is disable Default: disable(2) " ::= { hwDslamRaioCableLabsSuboptionEntry 2 } hwDslamRaioCableLabsSuboptionPara OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the parameters of RAIO CableLabs suboption. Range: a string of 0-255 characters. When hwDslamRaioCableLabsSuboptionIndex is 1, the first byte indicates the DOCSIS major version(ranges from 1 to 9), and the second byte indicates the DOCSIS minor version(ranges from 0 to 9), and other bytes are reserved, for example, 30 indicates that the DOCSIS version is 3.0. " ::= { hwDslamRaioCableLabsSuboptionEntry 3 } hwDslamRAIOAncpAggCidFormatString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the character string of the Access-Aggregation-Circuit-ID-ASCII format and Access-Aggregation-Circuit-ID-Binary format. Range: a string of 0-127 characters." ::= { hwPITP 27 } hwDslamRaioDHCPv6Option17CableLabsSubSuboptionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for setting and querying the RAIO DHCPv6 Option17 CableLabs sub-suboption. The index of this table is hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex and hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex." ::= { hwPITP 28 } hwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry OBJECT-TYPE SYNTAX HwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for setting and querying the RAIO DHCPv6 Option17 CableLabs sub-suboption. The index of this entry is hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex and hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex." INDEX { hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex, hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex } ::= { hwDslamRaioDHCPv6Option17CableLabsSubSuboptionTable 1 } HwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry ::= SEQUENCE { hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex Integer32, hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex Integer32, hwDslamRaioDHCPv6Option17CableLabsSubSuboptionStatus INTEGER, hwDslamRaioDHCPv6Option17CableLabsSubSuboptionPara OCTET STRING } hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the RAIO DHCPv6 Option17 CableLabs suboption. This leaf is an index. Range: 0-65535 " ::= { hwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry 1 } hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the RAIO DHCPv6 Option17 CableLabs sub-suboption. This leaf is an index. Range: 0-65535 " ::= { hwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry 2 } hwDslamRaioDHCPv6Option17CableLabsSubSuboptionStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the status of the RAIO DHCPv6 Option17 CableLabs sub-suboption. Options: 1. enable(1) -indicates the RAIO DHCPv6 Option17 CableLabs sub-suboption is enable 2. disable(2) -indicates the RAIO DHCPv6 Option17 CableLabs sub-suboption is disable Default: disable(2) " ::= { hwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry 3 } hwDslamRaioDHCPv6Option17CableLabsSubSuboptionPara OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the parameters of RAIO DHCPv6 Option17 CableLabs sub-suboption. Range: a string of 0-255 characters. When hwDslamRaioDHCPv6Option17CableLabsSuboptionIndex is 1025, and hwDslamRaioDHCPv6Option17CableLabsSubSuboptionIndex is 1, the first byte indicates the DOCSIS major version(ranges from 1 to 9), and the second byte indicates the DOCSIS minor version(ranges from 0 to 9), and other bytes are reserved, for example, 30 indicates that the DOCSIS version is 3.0. " ::= { hwDslamRaioDHCPv6Option17CableLabsSubSuboptionEntry 4 } hwDslamPITPTransparentUserVlanType OBJECT-TYPE SYNTAX BITS { untag(0), singleTag(1), multiTag(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the user VLAN based on which PITP pmode is transparently transmitted. Options: 1. untag(0) -indicates that the user packet does not contain VLANs 2. singleTag(1) -indicates that the user packet contains a single VLAN 3. multiTag(2) -indicates that the user packet contains multiple VLANs When singleTag is 0, set hwDslamPITPTransparentSingleUserVlanList to a null character string. When singleTag is 1, set hwDslamPITPTransparentSingleUserVlanList to a valid character string. " ::= { hwPITP 29 } hwDslamPITPTransparentSingleUserVlanList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the list of user single VLANs contained in the packets whose PITP pmode is transparently transmitted. VLAN ranges from 0 to 4095. The VLAN list is a character string consisting of digits (0-9) or digits and VLAN segments. Digits and VLAN segments are separated by a comma, for example, 2,200-300. For example: 1.To set user-side VLAN status to singleTag, VLAN list to 2,100-300, do as follows: singleTag(1) is set to 1 in hwDslamPITPTransparentUserVlanType, hwDslamPITPTransparentSingleUserVlanList:2,100-300 2.To set user-side VLAN status to untag and multiTag, do as follows: untag(0) and multiTag(2) are set to 1 in hwDslamPITPTransparentUserVlanType, hwDslamPITPTransparentSingleUserVlanList is a null character string. " ::= { hwPITP 30 } hwDslamRaioSuboptionActualDataRateType OBJECT-TYPE SYNTAX INTEGER { actualDataRate(1), actualNetDataRate(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the actual data rate type of RAIO suboption. Options: 1. actualDataRate(1) -indicates the RAIO suboption is actual data rate. The meaning of actualDataRate is defined in ITU-T G.997.1, paragraph 7.5.2.1 actual data rate. 2. actualNetDataRate(2) -indicates the RAIO suboption is actual net data rate. The meaning of actualNetDataRate is defined in ITU-T G.997.1, paragraph 7.5.2.8 actual net data rate (ACTNDR). Default: actualDataRate(1) " ::= { hwPITP 31 } hwDslamRadiusNasPortIdRAIOMode OBJECT-TYPE SYNTAX INTEGER { common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16), true(17), skb(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the RAIO mode of RADIUS NAS-Port-Id. Options: 1. common(1) -indicates the RAIO mode of RADIUS NAS-Port-Id is common 2. xdslPortRate(2) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of RADIUS NAS-Port-Id is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of RADIUS NAS-Port-Id is neuf 6. portUserLabel(6) -indicates the RAIO mode of RADIUS NAS-Port-Id is portUserLabel 7. bt(7) -indicates the RAIO mode of RADIUS NAS-Port-Id is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of RADIUS NAS-Port-Id is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of RADIUS NAS-Port-Id is dslForumDefault 10. brt(10) -indicates the RAIO mode of RADIUS NAS-Port-Id is brt 11. userDefined(11) -indicates the RAIO mode of RADIUS NAS-Port-Id is user defined 12. ft(12) -indicates the RAIO mode of RADIUS NAS-Port-Id is ft 13. cntelXpon(13) -indicates the RAIO mode of RADIUS NAS-Port-Id is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of RADIUS NAS-Port-Id is tm 15. bbf(15) -indicates the RAIO mode of RADIUS NAS-Port-Id is bbf 16. vnpt(16) -indicates the RAIO mode of RADIUS NAS-Port-Id is vnpt 17. true(17) -indicates the RAIO mode of RADIUS NAS-Port-Id is true 18. skb(18) -indicates the RAIO mode of RADIUS NAS-Port-Id is skb Default: common(1) Restrictions: bt(7) and skb(18) are not supported. When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable. " ::= { hwPITP 32} hwDslamRaioSuboptionFastReport OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates that fast sub-option report by DHCP/DHCPv6/PPPoE+ sub-option 0x81/0x82/0x8C/0x8E is enabled or disabled globally. Options: 1. disable(1) - Indicates that fast sub-option report by DHCP/DHCPv6/PPPoE+ sub-option 0x81/0x82/0x8C/0x8E is disabled globally. 2. enable(2) - Indicates that fast sub-option report by DHCP/DHCPv6/PPPoE+ sub-option 0x81/0x82/0x8C/0x8E is enabled globally. Default: disable(1) " ::= { hwPITP 33 } hwDslamRaioSuboptionValueTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamRaioSuboptionValueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used to set and query suboption of DHCP, PPPoE+, and ANCP. If suboption is set by using this table, the set value is used. If it is not set, the value automatically generated according to actual port conditions is used. The index of this table is hwDslamRaioSuboptionValueIndex and hwDslamRaioSuboptionValueIftype. " ::= { hwPITP 34 } hwDslamRaioSuboptionValueEntry OBJECT-TYPE SYNTAX HwDslamRaioSuboptionValueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used to set and query suboption of DHCP, PPPoE+, and ANCP. If suboption is set by using this table, the set value is used. If it is not set, the value automatically generated according to actual port conditions is used. The index of this entry is hwDslamRaioSuboptionValueIndex and hwDslamRaioSuboptionValueIftype. " INDEX { hwDslamRaioSuboptionValueIndex, hwDslamRaioSuboptionValueIftype } ::= { hwDslamRaioSuboptionValueTable 1 } HwDslamRaioSuboptionValueEntry ::= SEQUENCE { hwDslamRaioSuboptionValueIndex Integer32, hwDslamRaioSuboptionValue OCTET STRING, hwDslamRaioSuboptionValueIftype INTEGER } hwDslamRaioSuboptionValueIndex OBJECT-TYPE SYNTAX Integer32 (16..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the RAIO suboption. This leaf is an index. Range: 1-17 Currently, only suboption 0x90 is supported. The corresponding index is 16. " ::= { hwDslamRaioSuboptionValueEntry 1 } hwDslamRaioSuboptionValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the suboption value. Range: the length of the value must be 3 or 0 bytes. Setting null string, which length is 0, means delete the suboption value. " ::= { hwDslamRaioSuboptionValueEntry 2 } hwDslamRaioSuboptionValueIftype OBJECT-TYPE SYNTAX INTEGER { atm(1), eth(2), xpon(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface type. Options: 1. atm(1) -atm interface type 2. eth(2) -eth interface type 3. xpon(3) -xpon interface type For the ATM access mode, the value of this leaf is atm(1); for the Ethernet access mode , the value of this leaf is eth(2); for the xPON access mode, the value of this leaf is xpon(3). " ::= { hwDslamRaioSuboptionValueEntry 3 } hwDslamPppoeEchoUpportMonitor OBJECT IDENTIFIER ::= { hwPITP 35} hwDslamPppoeEchoUpportMonitorSwitch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the PPPoE Echo monitoring function of the uplink port. Options: 1. enable(1) - Indicates that the PPPoE Echo monitoring function of the uplink port is enabled. 2. disable(2) - Indicates that the PPPoE Echo monitoring function of the uplink port is disabled. Default: enable(1) " ::= { hwDslamPppoeEchoUpportMonitor 1 } hwDslamPppoeEchoUpportMonitorPeriod OBJECT-TYPE SYNTAX Integer32 (1..60) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the PPPoE Echo monitoring period of the uplink port. Unit: minute Default: 10 " ::= { hwDslamPppoeEchoUpportMonitor 2 } hwDslamPppoeEchoUpportMonitorThreshold OBJECT-TYPE SYNTAX Integer32 (10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the PPPoE Echo monitoring threshold for the uplink port. Unit: 1/100 Default: 50 " ::= { hwDslamPppoeEchoUpportMonitor 3 } hwDslamPppoeEchoUpportMonitorMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamPppoeEchoUpportMonitorMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures the PPPoE Echo monitoring table of uplink ports. The index of this table is hwDslamPppoeEchoUpportMonitorMemberIfIndex. " ::= { hwDslamPppoeEchoUpportMonitor 4 } hwDslamPppoeEchoUpportMonitorMemberEntry OBJECT-TYPE SYNTAX HwDslamPppoeEchoUpportMonitorMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configures the PPPoE Echo monitoring table of uplink ports. The index of this entry is hwDslamPppoeEchoUpportMonitorMemberIfIndex. " INDEX { hwDslamPppoeEchoUpportMonitorMemberIfIndex } ::= { hwDslamPppoeEchoUpportMonitorMemberTable 1 } HwDslamPppoeEchoUpportMonitorMemberEntry ::= SEQUENCE { hwDslamPppoeEchoUpportMonitorMemberIfIndex Integer32, hwDslamPppoeEchoUpportMonitorRowStatus RowStatus } hwDslamPppoeEchoUpportMonitorMemberIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the PPPoE Echo monitoring table of uplink ports. " ::= { hwDslamPppoeEchoUpportMonitorMemberEntry 1 } hwDslamPppoeEchoUpportMonitorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a PPPoE Echo monitoring table of uplink ports. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a PPPoE Echo monitoring table of uplink ports, this leaf need not be issued together. Options: 1. active(1) - Indicates the query operation. 2. createAndGo(4) - Indicates the creating operation. 3. destroy(6) - Indicates the deleting operation. " ::= { hwDslamPppoeEchoUpportMonitorMemberEntry 2 } hwDslamPppoeEchoUpportMonitorRecordTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamPppoeEchoUpportMonitorRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the PPPoE Echo monitoring table of uplink ports. The index of this table is hwDslamPppoeEchoUpportMonitorRecordIfIndex, hwDslamPppoeEchoUpportMonitorRecordIndex. " ::= { hwDslamPppoeEchoUpportMonitor 5 } hwDslamPppoeEchoUpportMonitorRecordEntry OBJECT-TYPE SYNTAX HwDslamPppoeEchoUpportMonitorRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the PPPoE Echo monitoring table of uplink ports. The index of this entry is hwDslamPppoeEchoUpportMonitorRecordIfIndex, hwDslamPppoeEchoUpportMonitorRecordIndex. " INDEX { hwDslamPppoeEchoUpportMonitorRecordIfIndex, hwDslamPppoeEchoUpportMonitorRecordIndex} ::= { hwDslamPppoeEchoUpportMonitorRecordTable 1 } HwDslamPppoeEchoUpportMonitorRecordEntry ::= SEQUENCE { hwDslamPppoeEchoUpportMonitorRecordIfIndex Integer32, hwDslamPppoeEchoUpportMonitorRecordIndex Integer32, hwDslamPppoeEchoUpportMonitorRecordTime DateAndTime, hwDslamPppoeEchoUpportMonitorPppoeEchoRequestCount Counter64, hwDslamPppoeEchoUpportMonitorPppoeEchoReplyCount Counter64, hwDslamPppoeEchoUpportMonitorPppoeEchoRequestLastCount Counter64, hwDslamPppoeEchoUpportMonitorPppoeEchoReplyLastCount Counter64 } hwDslamPppoeEchoUpportMonitorRecordIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the level-1 index of the PPPoE Echo monitoring table of uplink ports. " ::= { hwDslamPppoeEchoUpportMonitorRecordEntry 1 } hwDslamPppoeEchoUpportMonitorRecordIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the level-2 index of the PPPoE Echo monitoring table of uplink ports. " ::= { hwDslamPppoeEchoUpportMonitorRecordEntry 2 } hwDslamPppoeEchoUpportMonitorRecordTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates period end time of PPPoE Echo packet statistics. " ::= { hwDslamPppoeEchoUpportMonitorRecordEntry 3 } hwDslamPppoeEchoUpportMonitorPppoeEchoRequestCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PPPoE Echo request packet number received by the uplink port. " ::= { hwDslamPppoeEchoUpportMonitorRecordEntry 4 } hwDslamPppoeEchoUpportMonitorPppoeEchoReplyCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PPPoE Echo reply packet number received by the uplink port. " ::= { hwDslamPppoeEchoUpportMonitorRecordEntry 5 } hwDslamPppoeEchoUpportMonitorPppoeEchoRequestLastCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last PPPoE Echo request packet number received by the uplink port. " ::= { hwDslamPppoeEchoUpportMonitorRecordEntry 6 } hwDslamPppoeEchoUpportMonitorPppoeEchoReplyLastCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last PPPoE Echo reply packet number received by the uplink port. " ::= { hwDslamPppoeEchoUpportMonitorRecordEntry 7 } hwDslamPppoeEchoUpportMonitorCount OBJECT IDENTIFIER ::= { hwDslamPppoeEchoUpportMonitor 6} hwDslamPppoeEchoUpportMonitorPppoeEchoPreviousCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PPPoE Echo packet number received in the previous period by the uplink port. " ::= { hwDslamPppoeEchoUpportMonitorCount 1 } hwDslamPppoeEchoUpportMonitorPppoeEchoCurrentCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PPPoE Echo packet number received in the current period by the uplink port. " ::= { hwDslamPppoeEchoUpportMonitorCount 2 } hwDslamPppoeEchoUpportMonitorNotifySwitch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the PPPoE Echo monitoring notification function of the uplink port. Options: 1. enable(1) - Indicates that the PPPoE Echo monitoring notification function of the uplink port is enabled. 2. disable(2) - Indicates that the PPPoE Echo monitoring notification function of the uplink port is disabled. Default: disable(2) " ::= { hwDslamPppoeEchoUpportMonitor 7 } hwDslamPppoeEchoUpportMonitorActiveThreshold OBJECT-TYPE SYNTAX Integer32 (10..10000) UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the PPPoE Echo monitoring activation threshold for the uplink port. Unit: pps Default: 10 " ::= { hwDslamPppoeEchoUpportMonitor 8 } hwDslamPppoeEchoUpportMonitorStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the PPPoE Echo monitoring start time for the uplink port. The start time needs only the hour, minute, and second values, and thus only the fifth, sixth, and seventh bytes are used, where, the fifth byte indicates the hour value of the start time, the sixth byte indicates the minute value, and the seventh byte indicates the second value. Other bytes are reserved and are filled in 0. For example, if the start time is 08:30:00, the value is presented as 0x00 0x00 0x00 0x00 0x08 0x1E 0x00 0x00. The time must be from 00:00:00 to 23:59:59. " ::= { hwDslamPppoeEchoUpportMonitor 9 } hwDslamPppoeEchoUpportMonitorEndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the PPPoE Echo monitoring end time for the uplink port. The end time needs only the hour, minute, and second values, and thus only the fifth, sixth, and seventh bytes are used, where, the fifth byte indicates the hour value of the start time, the sixth byte indicates the minute value, and the seventh byte indicates the second value. Other bytes are reserved and are filled in 0. For example, if the start time is 08:30:00, the value is presented as 0x00 0x00 0x00 0x00 0x08 0x1E 0x00 0x00. The time must be from 00:00:00 to 23:59:59. " ::= { hwDslamPppoeEchoUpportMonitor 10 } hwDslamPppoeEchoUpportMonitorPeakRecordTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamPppoeEchoUpportMonitorPeakRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the table recording the monitored peak PPPoE echo packets on the uplink port. The index of this table is hwDslamPppoeEchoUpportMonitorPeakRecordIfIndex. " ::= { hwDslamPppoeEchoUpportMonitor 11 } hwDslamPppoeEchoUpportMonitorPeakRecordEntry OBJECT-TYPE SYNTAX HwDslamPppoeEchoUpportMonitorPeakRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the table recording the monitored peak PPPoE echo packets on the uplink port. The index of this entry is hwDslamPppoeEchoUpportMonitorPeakRecordIfIndex. " INDEX { hwDslamPppoeEchoUpportMonitorPeakRecordIfIndex } ::= { hwDslamPppoeEchoUpportMonitorPeakRecordTable 1 } HwDslamPppoeEchoUpportMonitorPeakRecordEntry ::= SEQUENCE { hwDslamPppoeEchoUpportMonitorPeakRecordIfIndex Integer32, hwDslamPppoeEchoUpportMonitorPeakRecordTime DateAndTime, hwDslamPppoeEchoUpportMonitorPeakPppoeEchoCount Counter64 } hwDslamPppoeEchoUpportMonitorPeakRecordIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the table recording the monitored peak PPPoE echo packets on the uplink port. " ::= { hwDslamPppoeEchoUpportMonitorPeakRecordEntry 1 } hwDslamPppoeEchoUpportMonitorPeakRecordTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the end time of peak PPPoE echo packet measurement. " ::= { hwDslamPppoeEchoUpportMonitorPeakRecordEntry 2 } hwDslamPppoeEchoUpportMonitorPeakPppoeEchoCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of peak PPPoE echo packets received on the uplink port. " ::= { hwDslamPppoeEchoUpportMonitorPeakRecordEntry 3 } hwPITPTraps OBJECT IDENTIFIER ::= { hwPITP 36 } hwPITPAlarmTraps OBJECT IDENTIFIER ::= { hwPITPTraps 1 } hwPITPAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwPITPAlarmTraps 0 } hwDslamPppoeEchoUpportMonitorRecordTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwDslamPppoeEchoUpportMonitorPppoeEchoPreviousCount, hwDslamPppoeEchoUpportMonitorPppoeEchoCurrentCount } STATUS current DESCRIPTION "The SNMP trap is generated when the number of reduced PPPoE Echo packets received by the uplink-port exceeds the threshold. " ::= { hwPITPAlarmTraps 0 1 } hwDslamAccessUserAbnormalMonitorRecordTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwDslamAccessUserAbnormalMonitorServiceFlowDialupCount, hwDslamAccessUserAbnormalMonitorServiceFlowDialupAbnormalCount } STATUS current DESCRIPTION "The trap is generated when the number of users having abnormal dialup exceeds the threshold. " ::= { hwPITPAlarmTraps 0 2 } hwDslamAccessUserAbnormalMonitorRecordRestoreTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwDslamAccessUserAbnormalMonitorServiceFlowDialupCount, hwDslamAccessUserAbnormalMonitorServiceFlowDialupAbnormalCount } STATUS current DESCRIPTION "The trap is generated when the number of users having abnormal dialup is lower than the threshold.. " ::= { hwPITPAlarmTraps 0 3 } -- -- PPPOE & DCHP MONITOR statistics -- hwDslamAccessUserAbnormalMonitor OBJECT IDENTIFIER ::= { hwPITP 37} hwDslamAccessUserAbnormalMonitorPppoeSwitch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the access user pppoe abnormal monitoring function. Options: 1. enable(1) - Indicates that the access user pppoe abnormal monitor switch is enabled. 2. disable(2) - Indicates that the access user pppoe abnormal monitor switch is disabled. Default: enable(1) " ::= { hwDslamAccessUserAbnormalMonitor 1 } hwDslamAccessUserAbnormalMonitorDhcpv4Switch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the access user DHCPv4 abnormal monitoring function. Options: 1. enable(1) - Indicates that the access user DHCPv4 abnormal monitor switch is enabled. 2. disable(2) - Indicates that the access user DHCPv4 abnormal monitor switch is disabled. Default: disable(2) " ::= { hwDslamAccessUserAbnormalMonitor 2 } hwDslamAccessUserAbnormalMonitorNotifySwitch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the access user pppoe or dhcpv4 abnormal monitoring notification function. Options: 1. enable(1) - Indicates that the access user pppoe or dhcpv4 abnormal monitoring notification function is enabled. 2. disable(2) - Indicates that the access user pppoe or dhcpv4 abnormal monitoring notification function is disabled. Default: disable(2) " ::= { hwDslamAccessUserAbnormalMonitor 3 } hwDslamAccessUserAbnormalMonitorThreshold OBJECT-TYPE SYNTAX Integer32 (1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the the access user pppoe or dhcpv4 abnormal monitoring threshold. Unit: percent Default: 30 " ::= { hwDslamAccessUserAbnormalMonitor 4 } hwDslamAccessUserAbnormalMonitorActiveThreshold OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the access user pppoe or dhcpv4 abnormal monitoring active threshold. Default: 10 " ::= { hwDslamAccessUserAbnormalMonitor 5 } hwDslamAccessUserAbnormalMonitorPeriod OBJECT-TYPE SYNTAX Integer32 (1..60) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the pppoe or dhcpv4 abnormal monitoring period for the access user . Unit: minute Default: 20 " ::= { hwDslamAccessUserAbnormalMonitor 6 } hwDslamAccessUserAbnormalMonitorLastRecordTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamAccessUserAbnormalMonitorLastRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of records in the last period which having abnormal dialup exceeds the threshold. The indexes of this table are hwDslamAccessUserAbnormalMonitorLastRecordBrdFSIndex and hwDslamAccessUserAbnormalMonitorLastRecordServicePortIndex. " ::= { hwDslamAccessUserAbnormalMonitor 7 } hwDslamAccessUserAbnormalMonitorLastRecordEntry OBJECT-TYPE SYNTAX HwDslamAccessUserAbnormalMonitorLastRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of records in the last period which having abnormal dialup exceeds the threshold. The indexes of this entry are hwDslamAccessUserAbnormalMonitorLastRecordBrdFSIndex and hwDslamAccessUserAbnormalMonitorLastRecordServicePortIndex. " INDEX { hwDslamAccessUserAbnormalMonitorLastRecordBrdFSIndex, hwDslamAccessUserAbnormalMonitorLastRecordServicePortIndex } ::= { hwDslamAccessUserAbnormalMonitorLastRecordTable 1 } HwDslamAccessUserAbnormalMonitorLastRecordEntry ::= SEQUENCE { hwDslamAccessUserAbnormalMonitorLastRecordBrdFSIndex Integer32, hwDslamAccessUserAbnormalMonitorLastRecordServicePortIndex Unsigned32, hwDslamAccessUserAbnormalMonitorLastRecordPppoePadiCount Unsigned32, hwDslamAccessUserAbnormalMonitorLastRecordPppoePadoCount Unsigned32, hwDslamAccessUserAbnormalMonitorLastRecordPppoePadrCount Unsigned32, hwDslamAccessUserAbnormalMonitorLastRecordPppoePadsCount Unsigned32, hwDslamAccessUserAbnormalMonitorLastRecordDhcpDiscoveryCount Unsigned32, hwDslamAccessUserAbnormalMonitorLastRecordDhcpOfferCount Unsigned32, hwDslamAccessUserAbnormalMonitorLastRecordDhcpRequestCount Unsigned32, hwDslamAccessUserAbnormalMonitorLastRecordDhcpAckCount Unsigned32 } hwDslamAccessUserAbnormalMonitorLastRecordBrdFSIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the InterfaceIndex of the monitoring slot in the last period. " ::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 1 } hwDslamAccessUserAbnormalMonitorLastRecordServicePortIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the statistics on flow. " ::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 2 } hwDslamAccessUserAbnormalMonitorLastRecordPppoePadiCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PADI packet number received on flow in the last period. " ::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 3 } hwDslamAccessUserAbnormalMonitorLastRecordPppoePadoCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PADO packet number sended on flow in the last period. " ::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 4 } hwDslamAccessUserAbnormalMonitorLastRecordPppoePadrCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PADR packet number received on flow in the last period. " ::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 5 } hwDslamAccessUserAbnormalMonitorLastRecordPppoePadsCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PADS packet number received on flow in the last period. " ::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 6 } hwDslamAccessUserAbnormalMonitorLastRecordDhcpDiscoveryCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates DHCP discovery packet number received on flow in the last period. " ::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 7} hwDslamAccessUserAbnormalMonitorLastRecordDhcpOfferCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates DHCP Offer packet number received on flow in the last period. " ::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 8 } hwDslamAccessUserAbnormalMonitorLastRecordDhcpRequestCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates DHCP Request packet number received on flow in the last period. " ::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 9 } hwDslamAccessUserAbnormalMonitorLastRecordDhcpAckCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates DHCP Ack packet number received on flow in the last period. " ::= { hwDslamAccessUserAbnormalMonitorLastRecordEntry 10 } hwDslamAccessUserAbnormalMonitorCurrentRecordTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamAccessUserAbnormalMonitorCurrentRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of records for the access user pppoe and dhcpv4 abnormal in the current period. The indexes of this table are hwDslamAccessUserAbnormalMonitorCurrentRecordBrdFSIndex and hwDslamAccessUserAbnormalMonitorCurrentRecordServicePortIndex. " ::= { hwDslamAccessUserAbnormalMonitor 8 } hwDslamAccessUserAbnormalMonitorCurrentRecordEntry OBJECT-TYPE SYNTAX HwDslamAccessUserAbnormalMonitorCurrentRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of records for the access user pppoe and dhcpv4 abnormal in the current period. The indexes of this entry are hwDslamAccessUserAbnormalMonitorCurrentRecordBrdFSIndex and hwDslamAccessUserAbnormalMonitorCurrentRecordServicePortIndex. " INDEX { hwDslamAccessUserAbnormalMonitorCurrentRecordBrdFSIndex, hwDslamAccessUserAbnormalMonitorCurrentRecordServicePortIndex } ::= { hwDslamAccessUserAbnormalMonitorCurrentRecordTable 1 } HwDslamAccessUserAbnormalMonitorCurrentRecordEntry ::= SEQUENCE { hwDslamAccessUserAbnormalMonitorCurrentRecordBrdFSIndex Integer32, hwDslamAccessUserAbnormalMonitorCurrentRecordServicePortIndex Unsigned32, hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadiCount Unsigned32, hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadoCount Unsigned32, hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadrCount Unsigned32, hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadsCount Unsigned32, hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpDiscoveryCount Unsigned32, hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpOfferCount Unsigned32, hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpRequestCount Unsigned32, hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpAckCount Unsigned32 } hwDslamAccessUserAbnormalMonitorCurrentRecordBrdFSIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index of the monitoring slot in the current period. " ::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 1 } hwDslamAccessUserAbnormalMonitorCurrentRecordServicePortIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the statistics on flow. " ::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 2 } hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadiCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PADI packet number received on flow in the current period. " ::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 3 } hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadoCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PADO packet number sended on flow in the current period. " ::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 4 } hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadrCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PADR packet number received on flow in the current period. " ::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 5 } hwDslamAccessUserAbnormalMonitorCurrentRecordPppoePadsCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates PADS packet number received on flow in the current period. " ::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 6 } hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpDiscoveryCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates DHCP discovery packet number received on flow in the current period. " ::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 7} hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpOfferCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates DHCP Offer packet number received on flow in the current period. " ::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 8 } hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpRequestCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates DHCP Request packet number received on flow in the current period. " ::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 9 } hwDslamAccessUserAbnormalMonitorCurrentRecordDhcpAckCount OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates DHCP Ack packet number received on flow in the current period. " ::= { hwDslamAccessUserAbnormalMonitorCurrentRecordEntry 10 } hwDslamAccessUserAbnormalMonitorServiceFlowDialupCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of service flows through which dialup performed. " ::= { hwDslamAccessUserAbnormalMonitor 9 } hwDslamAccessUserAbnormalMonitorServiceFlowDialupAbnormalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of service flows through which dialup is abnormal. " ::= { hwDslamAccessUserAbnormalMonitor 10 } hwDslamRaioAncpAggCidFormatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslamRaioAncpAggCidFormatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for setting and querying the RAIO ANCP aggcid string. The index of this table is hwDslamRaioAncpAggCidFormatType and hwDslamRaioAncpAggCidFormatIfType. " ::= { hwPITP 38 } hwDslamRaioAncpAggCidFormatEntry OBJECT-TYPE SYNTAX HwDslamRaioAncpAggCidFormatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for setting and querying the RAIO ANCP aggcid string. The index of this entry is hwDslamRaioAncpAggCidFormatType and hwDslamRaioAncpAggCidFormatIfType. " INDEX { hwDslamRaioAncpAggCidFormatType,hwDslamRaioAncpAggCidFormatIfType } ::= { hwDslamRaioAncpAggCidFormatTable 1 } HwDslamRaioAncpAggCidFormatEntry ::= SEQUENCE { hwDslamRaioAncpAggCidFormatType INTEGER, hwDslamRaioAncpAggCidFormatIfType INTEGER, hwDslamNewRaioAncpAggCidFormatString OCTET STRING } hwDslamRaioAncpAggCidFormatType OBJECT-TYPE SYNTAX INTEGER { aggCidAscii(1), aggCidBinary(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the RAIO Ancp aggcid type. This leaf is an index. Options: 1. aggCidAscii(1) -ascii 2. aggCidBinary(2) -binary " ::= { hwDslamRaioAncpAggCidFormatEntry 1 } hwDslamRaioAncpAggCidFormatIfType OBJECT-TYPE SYNTAX INTEGER { atm(1), eth(2), xponOnt(3), xponMxu(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the prot type of the RAIO ancp string. Options: 1. atm(1) -atm 2. eth(2) -eth 3. xponOnt(3) -xponOnt 4. xponMxu(4) -xponMxu " ::= { hwDslamRaioAncpAggCidFormatEntry 2 } hwDslamNewRaioAncpAggCidFormatString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the parameters of RAIO ANCP aggcid string. Range: a string of 0-127 characters.. " ::= { hwDslamRaioAncpAggCidFormatEntry 3 } END