Observium_CE/mibs/hp/HP-ICF-JOB-SCHEDULER-MIB

512 lines
20 KiB
Plaintext

--**MOD+***********************************************************************
-- * Module: hpicfJobScheduler.mib
-- *
-- * Copyright (C) 2013, 2015 Hewlett Packard Enterprise Development LP
-- * All Rights Reserved.
-- *
-- * The contents of this software are proprietary and confidential
-- * to the Hewlett Packard Enterprise Development LP. No part of this
-- * program may be photocopied, reproduced, or translated into another
-- * programming language without prior written consent of the
-- * Hewlett Packard Enterprise Development LP.
-- *
-- * Purpose: Contains the mib objects for Job Scheduler.
-- *
-- **MOD-***********************************************************************/
HP-ICF-JOB-SCHEDULER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
Unsigned32
FROM SNMPv2-SMI
DisplayString, RowStatus, TruthValue, DateAndTime
FROM SNMPv2-TC
hpSwitch
FROM HP-ICF-OID;
hpicfJobSchedulerMIB MODULE-IDENTITY
LAST-UPDATED "201605040000Z" -- May 04, 2016
ORGANIZATION "HP Networking"
CONTACT-INFO "Hewlett-Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION "This MIB module contains HP proprietary objects used to
configure Job Scheduling."
REVISION "201605040000Z" -- May 04, 2016
DESCRIPTION "Added Object hpicfJobSchedulerSkipCount "
REVISION "201604190000Z" -- Apr 19, 2016
DESCRIPTION "Added objects hpicfJobSchedulerRunningStatus,
hpicfJobSchedulerLastRunTime"
REVISION "201508270000Z" -- Aug 27, 2015
DESCRIPTION "Changed description for the object hpicfJobSchedulerStatus "
REVISION "201505130000Z" -- May 13, 2015
DESCRIPTION "Added objects hpicfJobSchedulerDelay,
hpicfJobSchedulerCount,
hpicfJobSchedulerStatus"
REVISION "201310050000Z" -- October 5, 2013
DESCRIPTION "Initial version."
::= { hpSwitch 105 }
hpicfJobSchedulerObjects OBJECT IDENTIFIER ::= { hpicfJobSchedulerMIB 1 }
hpicfJobSchedulerConformance OBJECT IDENTIFIER ::= { hpicfJobSchedulerMIB 2 }
-- ****************************************************************************
-- JobSchedulerTable
-- ****************************************************************************
hpicfJobSchedulerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpIcfSwitchJobSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table defines a set of jobs which run as per
the schedule or when a particular event occurs."
::= { hpicfJobSchedulerObjects 1 }
hpicfJobSchedulerEntry OBJECT-TYPE
SYNTAX HpIcfSwitchJobSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table which provides information about
a scheduled job."
INDEX { hpicfJobSchedulerName }
::= { hpicfJobSchedulerTable 1 }
HpIcfSwitchJobSchedulerEntry ::=
SEQUENCE {
hpicfJobSchedulerName DisplayString,
hpicfJobSchedulerRowStatus RowStatus,
hpicfJobSchedulerCommand OCTET STRING,
hpicfJobSchedulerConfigSave TruthValue,
hpicfJobSchedulerRunCount Unsigned32,
hpicfJobSchedulerErrorCount Unsigned32,
hpicfJobSchedulerLastOutput OCTET STRING,
hpicfJobSchedulerEvent BITS,
hpicfJobSchedulerCalendarMonth BITS,
hpicfJobSchedulerCalendarDayOfMonth BITS,
hpicfJobSchedulerCalendarDayOfWeek BITS,
hpicfJobSchedulerCalendarHour BITS,
hpicfJobSchedulerCalendarMinute BITS,
hpicfJobSchedulerDelay Unsigned32,
hpicfJobSchedulerCount Unsigned32,
hpicfJobSchedulerStatus TruthValue,
hpicfJobSchedulerRunningStatus INTEGER,
hpicfJobSchedulerLastRunTime DateAndTime,
hpicfJobSchedulerSkipCount Unsigned32
}
hpicfJobSchedulerName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..40))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A unique name for a scheduled job."
::= { hpicfJobSchedulerEntry 1 }
hpicfJobSchedulerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The Row Status of this entry.
To create a new entry, send an SNMP SET request with a
RowStatus of 'createAndGo'.
active - the job is ready to run as scheduled.
notInService - not valid for this table.
notReady - the job is not fully configured.
createAndGo - create a new entry.
createAndWait - not valid for this table.
delete - delete the entry."
::= { hpicfJobSchedulerEntry 2 }
hpicfJobSchedulerCommand OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The CLI command to execute when the job is run."
::= { hpicfJobSchedulerEntry 3 }
hpicfJobSchedulerConfigSave OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This flag causes any configuration changes made by the
job to be saved at completion."
::= { hpicfJobSchedulerEntry 4 }
hpicfJobSchedulerRunCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times since the device booted that the
job has run."
::= { hpicfJobSchedulerEntry 5 }
hpicfJobSchedulerErrorCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times since the device booted that the
job has resulted in an error."
::= { hpicfJobSchedulerEntry 6 }
hpicfJobSchedulerLastOutput OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The first 255 characters of output from the last job
execution."
::= { hpicfJobSchedulerEntry 7 }
hpicfJobSchedulerEvent OBJECT-TYPE
SYNTAX BITS {
reboot (0),
failover (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A set of events that will cause this job to run.
reboot - the job is run as soon as possible after the
device boots.
failover - the job is executed after failover to a
standby management module. This event only applies
to devices that have a standby module and is ignored
on other devices.
The Calendar schedule objects below are ignored when
any event bit is set in this object."
::= { hpicfJobSchedulerEntry 8 }
hpicfJobSchedulerCalendarMonth OBJECT-TYPE
SYNTAX BITS {
january(0),
february(1),
march(2),
april(3),
may(4),
june(5),
july(6),
august(7),
september(8),
october(9),
november(10),
december(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The set of months when this job should run. Some devices
may allow only a single month to be specified in the bitmap."
::= { hpicfJobSchedulerEntry 9 }
hpicfJobSchedulerCalendarDayOfMonth OBJECT-TYPE
SYNTAX BITS {
d1(0), d2(1), d3(2), d4(3), d5(4),
d6(5), d7(6), d8(7), d9(8), d10(9),
d11(10), d12(11), d13(12), d14(13), d15(14),
d16(15), d17(16), d18(17), d19(18), d20(19),
d21(20), d22(21), d23(22), d24(23), d25(24),
d26(25), d27(26), d28(27), d29(28), d30(29),
d31(30),
r1(31), r2(32), r3(33), r4(34), r5(35),
r6(36), r7(37), r8(38), r9(39), r10(40),
r11(41), r12(42), r13(43), r14(44), r15(45),
r16(46), r17(47), r18(48), r19(49), r20(50),
r21(51), r22(52), r23(53), r24(54), r25(55),
r26(56), r27(57), r28(58), r29(59), r30(60),
r31(61)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The set of days of the month when this job should run.
Bits beginning with 'd' specify a day relative to the
first day of the month. Bits beginning with 'r' specify
a day relative to the last day of the month. Bit 'r1'
is the last day of the month, bit 'r2' is the second to
last day of the month, etc.
Some devices may allow only a single day to be specified
in the bitmap."
::= { hpicfJobSchedulerEntry 10 }
hpicfJobSchedulerCalendarDayOfWeek OBJECT-TYPE
SYNTAX BITS {
sunday(0),
monday(1),
tuesday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The days of the week when the job is scheduled to run.
The Month and DayOfMonth objects above are ignored when
any bit is set in this object."
::= { hpicfJobSchedulerEntry 11 }
hpicfJobSchedulerCalendarHour OBJECT-TYPE
SYNTAX BITS {
h0(0), h1(1), h2(2), h3(3), h4(4),
h5(5), h6(6), h7(7), h8(8), h9(9),
h10(10), h11(11), h12(12), h13(13), h14(14),
h15(15), h16(16), h17(17), h18(18), h19(19),
h20(20), h21(21), h22(22), h23(23)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A bitmap of hours of the day when the job is scheduled
to run. Times are local. Some devices may allow only
a single hour to be specified in the bitmap."
::= { hpicfJobSchedulerEntry 12 }
hpicfJobSchedulerCalendarMinute OBJECT-TYPE
SYNTAX BITS {
m0(0), m1(1), m2(2), m3(3), m4(4),
m5(5), m6(6), m7(7), m8(8), m9(9),
m10(10), m11(11), m12(12), m13(13), m14(14),
m15(15), m16(16), m17(17), m18(18), m19(19),
m20(20), m21(21), m22(22), m23(23), m24(24),
m25(25), m26(26), m27(27), m28(28), m29(29),
m30(30), m31(31), m32(32), m33(33), m34(34),
m35(35), m36(36), m37(37), m38(38), m39(39),
m40(40), m41(41), m42(42), m43(43), m44(44),
m45(45), m46(46), m47(47), m48(48), m49(49),
m50(50), m51(51), m52(52), m53(53), m54(54),
m55(55), m56(56), m57(57), m58(58), m59(59)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A bitmap of minutes of the hour when the job is scheduled
to run. Times are local. This value is combined with the
Hour bitmap to create a set of times for the job to run on
each scheduled day. Some devices may allow only a single
minute to be specified in the bitmap."
::= { hpicfJobSchedulerEntry 13 }
hpicfJobSchedulerDelay OBJECT-TYPE
SYNTAX Unsigned32 (1..527039)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The delay in minutes before running the job. For recurring
jobs, this value is the delay before running
the job again."
::= { hpicfJobSchedulerEntry 14 }
hpicfJobSchedulerCount OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The object is set to determine the number of times this job would run.
The object value is set 0 if the job has no expiration count. "
::= { hpicfJobSchedulerEntry 15 }
hpicfJobSchedulerStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates whether the job is enabled or disabled.
The object has value true(1) if job status is enabled;
otherwise the object has value false(2) if job is disabled. "
::= { hpicfJobSchedulerEntry 16 }
hpicfJobSchedulerRunningStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2),
expired(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether the job running status is Active,
Inactive or Expired. If the job is running,
the status becomes Active. If the count has Expired,
the status becomes Expired and if the job is
Disabled, the running status becomes Inactive."
::= { hpicfJobSchedulerEntry 17 }
hpicfJobSchedulerLastRunTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the Last Run date and time of the
scheduled job.When job has not run even for once,
it will show value as 0."
::= { hpicfJobSchedulerEntry 18 }
hpicfJobSchedulerSkipCount OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the number of times this job is skipped for execution. If no job is skipped, the value of this object is set to 0. "
::= { hpicfJobSchedulerEntry 19 }
-- ****************************************************************************
-- Conformance Information
-- ****************************************************************************
-- units of conformance
hpicfJobSchedulerGroup OBJECT-GROUP
OBJECTS {
hpicfJobSchedulerRowStatus,
hpicfJobSchedulerCommand,
hpicfJobSchedulerConfigSave,
hpicfJobSchedulerRunCount,
hpicfJobSchedulerErrorCount,
hpicfJobSchedulerLastOutput,
hpicfJobSchedulerEvent,
hpicfJobSchedulerCalendarMonth,
hpicfJobSchedulerCalendarDayOfMonth,
hpicfJobSchedulerCalendarDayOfWeek,
hpicfJobSchedulerCalendarHour,
hpicfJobSchedulerCalendarMinute
}
STATUS deprecated
DESCRIPTION "A collection of objects providing configuration
of scheduled jobs."
::= { hpicfJobSchedulerMIBGroups 1 }
hpicfJobSchedulerGroup1 OBJECT-GROUP
OBJECTS {
hpicfJobSchedulerRowStatus,
hpicfJobSchedulerCommand,
hpicfJobSchedulerConfigSave,
hpicfJobSchedulerRunCount,
hpicfJobSchedulerErrorCount,
hpicfJobSchedulerLastOutput,
hpicfJobSchedulerEvent,
hpicfJobSchedulerCalendarMonth,
hpicfJobSchedulerCalendarDayOfMonth,
hpicfJobSchedulerCalendarDayOfWeek,
hpicfJobSchedulerCalendarHour,
hpicfJobSchedulerCalendarMinute,
hpicfJobSchedulerDelay,
hpicfJobSchedulerCount,
hpicfJobSchedulerStatus
}
STATUS deprecated
DESCRIPTION "A collection of objects providing configuration
of scheduled jobs."
::= { hpicfJobSchedulerMIBGroups 2 }
hpicfJobSchedulerGroup2 OBJECT-GROUP
OBJECTS {
hpicfJobSchedulerRowStatus,
hpicfJobSchedulerCommand,
hpicfJobSchedulerConfigSave,
hpicfJobSchedulerRunCount,
hpicfJobSchedulerErrorCount,
hpicfJobSchedulerLastOutput,
hpicfJobSchedulerEvent,
hpicfJobSchedulerCalendarMonth,
hpicfJobSchedulerCalendarDayOfMonth,
hpicfJobSchedulerCalendarDayOfWeek,
hpicfJobSchedulerCalendarHour,
hpicfJobSchedulerCalendarMinute,
hpicfJobSchedulerDelay,
hpicfJobSchedulerCount,
hpicfJobSchedulerStatus,
hpicfJobSchedulerRunningStatus,
hpicfJobSchedulerLastRunTime
}
STATUS deprecated
DESCRIPTION "A collection of objects providing configuration
of scheduled jobs."
::= { hpicfJobSchedulerMIBGroups 3 }
hpicfJobSchedulerGroup3 OBJECT-GROUP
OBJECTS {
hpicfJobSchedulerRowStatus,
hpicfJobSchedulerCommand,
hpicfJobSchedulerConfigSave,
hpicfJobSchedulerRunCount,
hpicfJobSchedulerErrorCount,
hpicfJobSchedulerLastOutput,
hpicfJobSchedulerEvent,
hpicfJobSchedulerCalendarMonth,
hpicfJobSchedulerCalendarDayOfMonth,
hpicfJobSchedulerCalendarDayOfWeek,
hpicfJobSchedulerCalendarHour,
hpicfJobSchedulerCalendarMinute,
hpicfJobSchedulerDelay,
hpicfJobSchedulerCount,
hpicfJobSchedulerStatus,
hpicfJobSchedulerRunningStatus,
hpicfJobSchedulerLastRunTime,
hpicfJobSchedulerSkipCount
}
STATUS current
DESCRIPTION "A collection of objects providing configuration
of scheduled jobs."
::= { hpicfJobSchedulerMIBGroups 4 }
hpicfJobSchedulerMIBCompliances OBJECT IDENTIFIER ::= { hpicfJobSchedulerConformance 1 }
hpicfJobSchedulerMIBGroups OBJECT IDENTIFIER ::= { hpicfJobSchedulerConformance 2 }
-- compliance statements
hpicfJobSchedulerMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "The compliance statement for device support of
HP-ICF-JOB-SCHEDULER-MIB."
MODULE -- This Module
MANDATORY-GROUPS {
hpicfJobSchedulerGroup
}
::= { hpicfJobSchedulerMIBCompliances 1 }
hpicfJobSchedulerMIBCompliance1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "The compliance statement for device support of
HP-ICF-JOB-SCHEDULER-MIB."
MODULE -- This Module
MANDATORY-GROUPS {
hpicfJobSchedulerGroup1
}
::= { hpicfJobSchedulerMIBCompliances 2 }
hpicfJobSchedulerMIBCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "The compliance statement for device support of
HP-ICF-JOB-SCHEDULER-MIB."
MODULE -- This Module
MANDATORY-GROUPS {
hpicfJobSchedulerGroup2
}
::= { hpicfJobSchedulerMIBCompliances 3 }
hpicfJobSchedulerMIBCompliance3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for device support of
HP-ICF-JOB-SCHEDULER-MIB."
MODULE -- This Module
MANDATORY-GROUPS {
hpicfJobSchedulerGroup3
}
::= { hpicfJobSchedulerMIBCompliances 4 }
END