--**MOD+*********************************************************************** -- * Module: hpicfJobScheduler.mib -- * -- * Copyright (C) 2013, 2015 Hewlett Packard Enterprise Development LP -- * All Rights Reserved. -- * -- * The contents of this software are proprietary and confidential -- * to the Hewlett Packard Enterprise Development LP. No part of this -- * program may be photocopied, reproduced, or translated into another -- * programming language without prior written consent of the -- * Hewlett Packard Enterprise Development LP. -- * -- * Purpose: Contains the mib objects for Job Scheduler. -- * -- **MOD-***********************************************************************/ HP-ICF-JOB-SCHEDULER-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF Unsigned32 FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue, DateAndTime FROM SNMPv2-TC hpSwitch FROM HP-ICF-OID; hpicfJobSchedulerMIB MODULE-IDENTITY LAST-UPDATED "201605040000Z" -- May 04, 2016 ORGANIZATION "HP Networking" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module contains HP proprietary objects used to configure Job Scheduling." REVISION "201605040000Z" -- May 04, 2016 DESCRIPTION "Added Object hpicfJobSchedulerSkipCount " REVISION "201604190000Z" -- Apr 19, 2016 DESCRIPTION "Added objects hpicfJobSchedulerRunningStatus, hpicfJobSchedulerLastRunTime" REVISION "201508270000Z" -- Aug 27, 2015 DESCRIPTION "Changed description for the object hpicfJobSchedulerStatus " REVISION "201505130000Z" -- May 13, 2015 DESCRIPTION "Added objects hpicfJobSchedulerDelay, hpicfJobSchedulerCount, hpicfJobSchedulerStatus" REVISION "201310050000Z" -- October 5, 2013 DESCRIPTION "Initial version." ::= { hpSwitch 105 } hpicfJobSchedulerObjects OBJECT IDENTIFIER ::= { hpicfJobSchedulerMIB 1 } hpicfJobSchedulerConformance OBJECT IDENTIFIER ::= { hpicfJobSchedulerMIB 2 } -- **************************************************************************** -- JobSchedulerTable -- **************************************************************************** hpicfJobSchedulerTable OBJECT-TYPE SYNTAX SEQUENCE OF HpIcfSwitchJobSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines a set of jobs which run as per the schedule or when a particular event occurs." ::= { hpicfJobSchedulerObjects 1 } hpicfJobSchedulerEntry OBJECT-TYPE SYNTAX HpIcfSwitchJobSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table which provides information about a scheduled job." INDEX { hpicfJobSchedulerName } ::= { hpicfJobSchedulerTable 1 } HpIcfSwitchJobSchedulerEntry ::= SEQUENCE { hpicfJobSchedulerName DisplayString, hpicfJobSchedulerRowStatus RowStatus, hpicfJobSchedulerCommand OCTET STRING, hpicfJobSchedulerConfigSave TruthValue, hpicfJobSchedulerRunCount Unsigned32, hpicfJobSchedulerErrorCount Unsigned32, hpicfJobSchedulerLastOutput OCTET STRING, hpicfJobSchedulerEvent BITS, hpicfJobSchedulerCalendarMonth BITS, hpicfJobSchedulerCalendarDayOfMonth BITS, hpicfJobSchedulerCalendarDayOfWeek BITS, hpicfJobSchedulerCalendarHour BITS, hpicfJobSchedulerCalendarMinute BITS, hpicfJobSchedulerDelay Unsigned32, hpicfJobSchedulerCount Unsigned32, hpicfJobSchedulerStatus TruthValue, hpicfJobSchedulerRunningStatus INTEGER, hpicfJobSchedulerLastRunTime DateAndTime, hpicfJobSchedulerSkipCount Unsigned32 } hpicfJobSchedulerName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..40)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique name for a scheduled job." ::= { hpicfJobSchedulerEntry 1 } hpicfJobSchedulerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The Row Status of this entry. To create a new entry, send an SNMP SET request with a RowStatus of 'createAndGo'. active - the job is ready to run as scheduled. notInService - not valid for this table. notReady - the job is not fully configured. createAndGo - create a new entry. createAndWait - not valid for this table. delete - delete the entry." ::= { hpicfJobSchedulerEntry 2 } hpicfJobSchedulerCommand OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The CLI command to execute when the job is run." ::= { hpicfJobSchedulerEntry 3 } hpicfJobSchedulerConfigSave OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This flag causes any configuration changes made by the job to be saved at completion." ::= { hpicfJobSchedulerEntry 4 } hpicfJobSchedulerRunCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times since the device booted that the job has run." ::= { hpicfJobSchedulerEntry 5 } hpicfJobSchedulerErrorCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times since the device booted that the job has resulted in an error." ::= { hpicfJobSchedulerEntry 6 } hpicfJobSchedulerLastOutput OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The first 255 characters of output from the last job execution." ::= { hpicfJobSchedulerEntry 7 } hpicfJobSchedulerEvent OBJECT-TYPE SYNTAX BITS { reboot (0), failover (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "A set of events that will cause this job to run. reboot - the job is run as soon as possible after the device boots. failover - the job is executed after failover to a standby management module. This event only applies to devices that have a standby module and is ignored on other devices. The Calendar schedule objects below are ignored when any event bit is set in this object." ::= { hpicfJobSchedulerEntry 8 } hpicfJobSchedulerCalendarMonth OBJECT-TYPE SYNTAX BITS { january(0), february(1), march(2), april(3), may(4), june(5), july(6), august(7), september(8), october(9), november(10), december(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "The set of months when this job should run. Some devices may allow only a single month to be specified in the bitmap." ::= { hpicfJobSchedulerEntry 9 } hpicfJobSchedulerCalendarDayOfMonth OBJECT-TYPE SYNTAX BITS { d1(0), d2(1), d3(2), d4(3), d5(4), d6(5), d7(6), d8(7), d9(8), d10(9), d11(10), d12(11), d13(12), d14(13), d15(14), d16(15), d17(16), d18(17), d19(18), d20(19), d21(20), d22(21), d23(22), d24(23), d25(24), d26(25), d27(26), d28(27), d29(28), d30(29), d31(30), r1(31), r2(32), r3(33), r4(34), r5(35), r6(36), r7(37), r8(38), r9(39), r10(40), r11(41), r12(42), r13(43), r14(44), r15(45), r16(46), r17(47), r18(48), r19(49), r20(50), r21(51), r22(52), r23(53), r24(54), r25(55), r26(56), r27(57), r28(58), r29(59), r30(60), r31(61) } MAX-ACCESS read-write STATUS current DESCRIPTION "The set of days of the month when this job should run. Bits beginning with 'd' specify a day relative to the first day of the month. Bits beginning with 'r' specify a day relative to the last day of the month. Bit 'r1' is the last day of the month, bit 'r2' is the second to last day of the month, etc. Some devices may allow only a single day to be specified in the bitmap." ::= { hpicfJobSchedulerEntry 10 } hpicfJobSchedulerCalendarDayOfWeek OBJECT-TYPE SYNTAX BITS { sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The days of the week when the job is scheduled to run. The Month and DayOfMonth objects above are ignored when any bit is set in this object." ::= { hpicfJobSchedulerEntry 11 } hpicfJobSchedulerCalendarHour OBJECT-TYPE SYNTAX BITS { h0(0), h1(1), h2(2), h3(3), h4(4), h5(5), h6(6), h7(7), h8(8), h9(9), h10(10), h11(11), h12(12), h13(13), h14(14), h15(15), h16(16), h17(17), h18(18), h19(19), h20(20), h21(21), h22(22), h23(23) } MAX-ACCESS read-write STATUS current DESCRIPTION "A bitmap of hours of the day when the job is scheduled to run. Times are local. Some devices may allow only a single hour to be specified in the bitmap." ::= { hpicfJobSchedulerEntry 12 } hpicfJobSchedulerCalendarMinute OBJECT-TYPE SYNTAX BITS { m0(0), m1(1), m2(2), m3(3), m4(4), m5(5), m6(6), m7(7), m8(8), m9(9), m10(10), m11(11), m12(12), m13(13), m14(14), m15(15), m16(16), m17(17), m18(18), m19(19), m20(20), m21(21), m22(22), m23(23), m24(24), m25(25), m26(26), m27(27), m28(28), m29(29), m30(30), m31(31), m32(32), m33(33), m34(34), m35(35), m36(36), m37(37), m38(38), m39(39), m40(40), m41(41), m42(42), m43(43), m44(44), m45(45), m46(46), m47(47), m48(48), m49(49), m50(50), m51(51), m52(52), m53(53), m54(54), m55(55), m56(56), m57(57), m58(58), m59(59) } MAX-ACCESS read-write STATUS current DESCRIPTION "A bitmap of minutes of the hour when the job is scheduled to run. Times are local. This value is combined with the Hour bitmap to create a set of times for the job to run on each scheduled day. Some devices may allow only a single minute to be specified in the bitmap." ::= { hpicfJobSchedulerEntry 13 } hpicfJobSchedulerDelay OBJECT-TYPE SYNTAX Unsigned32 (1..527039) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The delay in minutes before running the job. For recurring jobs, this value is the delay before running the job again." ::= { hpicfJobSchedulerEntry 14 } hpicfJobSchedulerCount OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The object is set to determine the number of times this job would run. The object value is set 0 if the job has no expiration count. " ::= { hpicfJobSchedulerEntry 15 } hpicfJobSchedulerStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the job is enabled or disabled. The object has value true(1) if job status is enabled; otherwise the object has value false(2) if job is disabled. " ::= { hpicfJobSchedulerEntry 16 } hpicfJobSchedulerRunningStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), expired(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the job running status is Active, Inactive or Expired. If the job is running, the status becomes Active. If the count has Expired, the status becomes Expired and if the job is Disabled, the running status becomes Inactive." ::= { hpicfJobSchedulerEntry 17 } hpicfJobSchedulerLastRunTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Last Run date and time of the scheduled job.When job has not run even for once, it will show value as 0." ::= { hpicfJobSchedulerEntry 18 } hpicfJobSchedulerSkipCount OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of times this job is skipped for execution. If no job is skipped, the value of this object is set to 0. " ::= { hpicfJobSchedulerEntry 19 } -- **************************************************************************** -- Conformance Information -- **************************************************************************** -- units of conformance hpicfJobSchedulerGroup OBJECT-GROUP OBJECTS { hpicfJobSchedulerRowStatus, hpicfJobSchedulerCommand, hpicfJobSchedulerConfigSave, hpicfJobSchedulerRunCount, hpicfJobSchedulerErrorCount, hpicfJobSchedulerLastOutput, hpicfJobSchedulerEvent, hpicfJobSchedulerCalendarMonth, hpicfJobSchedulerCalendarDayOfMonth, hpicfJobSchedulerCalendarDayOfWeek, hpicfJobSchedulerCalendarHour, hpicfJobSchedulerCalendarMinute } STATUS deprecated DESCRIPTION "A collection of objects providing configuration of scheduled jobs." ::= { hpicfJobSchedulerMIBGroups 1 } hpicfJobSchedulerGroup1 OBJECT-GROUP OBJECTS { hpicfJobSchedulerRowStatus, hpicfJobSchedulerCommand, hpicfJobSchedulerConfigSave, hpicfJobSchedulerRunCount, hpicfJobSchedulerErrorCount, hpicfJobSchedulerLastOutput, hpicfJobSchedulerEvent, hpicfJobSchedulerCalendarMonth, hpicfJobSchedulerCalendarDayOfMonth, hpicfJobSchedulerCalendarDayOfWeek, hpicfJobSchedulerCalendarHour, hpicfJobSchedulerCalendarMinute, hpicfJobSchedulerDelay, hpicfJobSchedulerCount, hpicfJobSchedulerStatus } STATUS deprecated DESCRIPTION "A collection of objects providing configuration of scheduled jobs." ::= { hpicfJobSchedulerMIBGroups 2 } hpicfJobSchedulerGroup2 OBJECT-GROUP OBJECTS { hpicfJobSchedulerRowStatus, hpicfJobSchedulerCommand, hpicfJobSchedulerConfigSave, hpicfJobSchedulerRunCount, hpicfJobSchedulerErrorCount, hpicfJobSchedulerLastOutput, hpicfJobSchedulerEvent, hpicfJobSchedulerCalendarMonth, hpicfJobSchedulerCalendarDayOfMonth, hpicfJobSchedulerCalendarDayOfWeek, hpicfJobSchedulerCalendarHour, hpicfJobSchedulerCalendarMinute, hpicfJobSchedulerDelay, hpicfJobSchedulerCount, hpicfJobSchedulerStatus, hpicfJobSchedulerRunningStatus, hpicfJobSchedulerLastRunTime } STATUS deprecated DESCRIPTION "A collection of objects providing configuration of scheduled jobs." ::= { hpicfJobSchedulerMIBGroups 3 } hpicfJobSchedulerGroup3 OBJECT-GROUP OBJECTS { hpicfJobSchedulerRowStatus, hpicfJobSchedulerCommand, hpicfJobSchedulerConfigSave, hpicfJobSchedulerRunCount, hpicfJobSchedulerErrorCount, hpicfJobSchedulerLastOutput, hpicfJobSchedulerEvent, hpicfJobSchedulerCalendarMonth, hpicfJobSchedulerCalendarDayOfMonth, hpicfJobSchedulerCalendarDayOfWeek, hpicfJobSchedulerCalendarHour, hpicfJobSchedulerCalendarMinute, hpicfJobSchedulerDelay, hpicfJobSchedulerCount, hpicfJobSchedulerStatus, hpicfJobSchedulerRunningStatus, hpicfJobSchedulerLastRunTime, hpicfJobSchedulerSkipCount } STATUS current DESCRIPTION "A collection of objects providing configuration of scheduled jobs." ::= { hpicfJobSchedulerMIBGroups 4 } hpicfJobSchedulerMIBCompliances OBJECT IDENTIFIER ::= { hpicfJobSchedulerConformance 1 } hpicfJobSchedulerMIBGroups OBJECT IDENTIFIER ::= { hpicfJobSchedulerConformance 2 } -- compliance statements hpicfJobSchedulerMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for device support of HP-ICF-JOB-SCHEDULER-MIB." MODULE -- This Module MANDATORY-GROUPS { hpicfJobSchedulerGroup } ::= { hpicfJobSchedulerMIBCompliances 1 } hpicfJobSchedulerMIBCompliance1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for device support of HP-ICF-JOB-SCHEDULER-MIB." MODULE -- This Module MANDATORY-GROUPS { hpicfJobSchedulerGroup1 } ::= { hpicfJobSchedulerMIBCompliances 2 } hpicfJobSchedulerMIBCompliance2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for device support of HP-ICF-JOB-SCHEDULER-MIB." MODULE -- This Module MANDATORY-GROUPS { hpicfJobSchedulerGroup2 } ::= { hpicfJobSchedulerMIBCompliances 3 } hpicfJobSchedulerMIBCompliance3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for device support of HP-ICF-JOB-SCHEDULER-MIB." MODULE -- This Module MANDATORY-GROUPS { hpicfJobSchedulerGroup3 } ::= { hpicfJobSchedulerMIBCompliances 4 } END