11998 lines
378 KiB
Plaintext
11998 lines
378 KiB
Plaintext
------------------------------------------------------------------------------
|
||
--
|
||
-- File : ngponMib.mi2
|
||
-- Description : gpon new platform configuration MIB
|
||
-- Version : 1.0
|
||
-- Date : July 14, 2016
|
||
|
||
-- Copyright (c) 2016-2020 Genexis Systems, Inc. All Rights Reserved.
|
||
--
|
||
------------------------------------------------------------------------------
|
||
|
||
NGPON-MIB DEFINITIONS ::= BEGIN
|
||
|
||
IMPORTS
|
||
MODULE-IDENTITY, OBJECT-TYPE,
|
||
Counter32, Unsigned32, TimeTicks FROM SNMPv2-SMI
|
||
TimeInterval, RowStatus, TruthValue,
|
||
TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC
|
||
dataCom FROM ADMIN-MASTER-MIB
|
||
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF;
|
||
|
||
|
||
ngpon OBJECT IDENTIFIER ::= { dataCom 14 }
|
||
|
||
|
||
|
||
-- gpon function ------------------------------------------
|
||
gponConfig OBJECT IDENTIFIER ::= { ngpon 1 }
|
||
gponStatus OBJECT IDENTIFIER ::= { ngpon 2 }
|
||
oemTrue OBJECT IDENTIFIER ::= { ngpon 3 }
|
||
gponSwitch OBJECT IDENTIFIER ::= { ngpon 4 }
|
||
|
||
configDevice OBJECT IDENTIFIER ::= { gponConfig 1 }
|
||
configSlot OBJECT IDENTIFIER ::= { gponConfig 2 }
|
||
configPport OBJECT IDENTIFIER ::= { gponConfig 3 }
|
||
configOnt OBJECT IDENTIFIER ::= { gponConfig 4 }
|
||
statusDevice OBJECT IDENTIFIER ::= { gponStatus 1 }
|
||
statusSlot OBJECT IDENTIFIER ::= { gponStatus 2 }
|
||
statusPport OBJECT IDENTIFIER ::= { gponStatus 3 }
|
||
statusOnt OBJECT IDENTIFIER ::= { gponStatus 4 }
|
||
statusTrap OBJECT IDENTIFIER ::= { gponStatus 5 }
|
||
|
||
--------------------------------------------------------------
|
||
------------------ 1.1. config device ----------------------
|
||
--------------------------------------------------------------
|
||
-- 1.1.1. deployControl
|
||
-- 1.1.2. deployInactive
|
||
-- 1.1.3. deployActive
|
||
-- 1.1.4. deployDemo
|
||
-- 1.1.5. configDeviceBaseInfo
|
||
|
||
-- 1.1.1. deployControl ------------------------------------
|
||
deployControl OBJECT IDENTIFIER ::= { configDevice 1 }
|
||
|
||
deployPermission OBJECT-TYPE
|
||
SYNTAX INTEGER (0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Set deployPermission = 0 to request permission.
|
||
Set deployPermission = 1 to release permission.
|
||
When read, the value is always 0."
|
||
::= { deployControl 1 }
|
||
|
||
deployAction OBJECT-TYPE
|
||
SYNTAX INTEGER (0..2)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Set deployAction = 0 to active the deploy.
|
||
Set deployAction = 1 to rebuild the deploy.
|
||
Set deployAction = 2 to clear the deploy.
|
||
When read, the value is always 0."
|
||
::= { deployControl 2 }
|
||
|
||
-- 1.1.2. deployInactive ----------------------------------
|
||
deployInactive OBJECT IDENTIFIER ::= { configDevice 2 }
|
||
|
||
-- 1.1.2.1. inactiveTrafficConfig
|
||
-- 1.1.2.2. inactiveDbaTable
|
||
-- 1.1.2.3. inactiveLineCommonConfig
|
||
-- 1.1.2.4. inactiveLineSFUConfig
|
||
-- 1.1.2.5. inactiveLineHGUConfig
|
||
-- 1.1.2.6. inactiveRuleTable
|
||
-- 1.1.2.7. inactiveUniqueConfig
|
||
-- 1.1.2.8. inactiveCtrlMcastConfig
|
||
-- 1.1.2.9. inactiveCtrlAlarmConfig
|
||
|
||
-- 1.1.2.1. inactiveTrafficConfig --------------------------
|
||
inactiveTrafficConfig OBJECT IDENTIFIER ::= { deployInactive 1 }
|
||
|
||
-- 1.1.2.1.1. inactiveVlanTable
|
||
-- 1.1.2.1.2. inactiveUsTrafficTable
|
||
-- 1.1.2.1.3. inactiveDsTrafficTable
|
||
-- 1.1.2.1.4. inactiveVlanPrimaryTable
|
||
|
||
-- 1.1.2.1.1. inactiveVlanTable --------------------------
|
||
|
||
inactiveVlanTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveVlanEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive vlan table."
|
||
::= { inactiveTrafficConfig 1 }
|
||
|
||
inactiveVlanEntry OBJECT-TYPE
|
||
SYNTAX InactiveVlanEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive vlan table"
|
||
INDEX { inactiveVlanIndex, inactiveVlanSubIndex }
|
||
::= { inactiveVlanTable 1 }
|
||
|
||
InactiveVlanEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveVlanIndex INTEGER,
|
||
inactiveVlanSubIndex INTEGER,
|
||
inactiveVlanAction INTEGER,
|
||
inactiveVlanOldVid INTEGER,
|
||
inactiveVlanOldPriority INTEGER,
|
||
inactiveVlanNewVid INTEGER,
|
||
inactiveVlanNewPriority INTEGER,
|
||
inactiveVlanRowStatus RowStatus
|
||
}
|
||
|
||
inactiveVlanIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of inactive vlan table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveVlanEntry 1 }
|
||
|
||
inactiveVlanSubIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..32)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 2nd index of inactive vlan table, should be inputted with <1-32>."
|
||
::= { inactiveVlanEntry 2 }
|
||
|
||
inactiveVlanAction OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveVlanAction:
|
||
0 NULL
|
||
1 translate
|
||
2 add
|
||
3 add default"
|
||
::= { inactiveVlanEntry 3 }
|
||
|
||
inactiveVlanOldVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"old vid, or inner vid, should in <1-4094>."
|
||
::= { inactiveVlanEntry 4 }
|
||
|
||
inactiveVlanOldPriority OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"old priority, or inner priority, should in <0-7>."
|
||
::= { inactiveVlanEntry 5 }
|
||
|
||
inactiveVlanNewVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"new vid, or outer vid, or default vid, should in <1-4094>."
|
||
::= { inactiveVlanEntry 6 }
|
||
|
||
inactiveVlanNewPriority OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"new priority, or outer priority, or default priority, should in <0-7>."
|
||
::= { inactiveVlanEntry 7 }
|
||
|
||
inactiveVlanRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveVlanEntry 8 }
|
||
|
||
-- 1.1.2.1.2. inactiveUsTrafficTable --------------------------
|
||
|
||
inactiveUsTrafficTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUsTrafficEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive us traffic table."
|
||
::= { inactiveTrafficConfig 2 }
|
||
|
||
inactiveUsTrafficEntry OBJECT-TYPE
|
||
SYNTAX InactiveUsTrafficEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive us traffic table"
|
||
INDEX { inactiveUsTrafficIndex }
|
||
::= { inactiveUsTrafficTable 1 }
|
||
|
||
InactiveUsTrafficEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUsTrafficIndex INTEGER,
|
||
inactiveUsTrafficName OCTET STRING,
|
||
inactiveUsTrafficPq INTEGER,
|
||
inactiveUsTrafficCir INTEGER,
|
||
inactiveUsTrafficPir INTEGER,
|
||
inactiveUsTrafficCbs INTEGER,
|
||
inactiveUsTrafficPbs INTEGER,
|
||
inactiveUsTrafficRowStatus RowStatus
|
||
}
|
||
|
||
inactiveUsTrafficIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of inactive us traffic table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUsTrafficEntry 1 }
|
||
|
||
inactiveUsTrafficName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"us traffic name, max length: 128."
|
||
::= { inactiveUsTrafficEntry 2 }
|
||
|
||
inactiveUsTrafficPq OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport priority queue, should be inputted with <0-7>."
|
||
::= { inactiveUsTrafficEntry 3 }
|
||
|
||
inactiveUsTrafficCir OBJECT-TYPE
|
||
SYNTAX INTEGER(64..1310720)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport committed infomation rate, should be inputted with <64-10240000>.
|
||
must to be divisible by 64kbps,must not less than 64 kbps."
|
||
::= { inactiveUsTrafficEntry 4 }
|
||
|
||
inactiveUsTrafficPir OBJECT-TYPE
|
||
SYNTAX INTEGER(64..1310720)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport peek infomation rate, should be inputted with <64-10240000>.
|
||
must to be divisible by 64kbps,must not less than 64 kbps."
|
||
::= { inactiveUsTrafficEntry 5 }
|
||
|
||
inactiveUsTrafficCbs OBJECT-TYPE
|
||
SYNTAX INTEGER(2000..1310720)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport committed burst size, should be inputted with <2000-10240000>."
|
||
::= { inactiveUsTrafficEntry 6 }
|
||
|
||
inactiveUsTrafficPbs OBJECT-TYPE
|
||
SYNTAX INTEGER(2000..1310720)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport peek burst size, should be inputted with <2000-10240000>."
|
||
::= { inactiveUsTrafficEntry 7 }
|
||
|
||
inactiveUsTrafficRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveUsTrafficEntry 8 }
|
||
|
||
-- 1.1.2.1.2. inactiveDsTrafficTable --------------------------
|
||
|
||
inactiveDsTrafficTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveDsTrafficEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive ds traffic table."
|
||
::= { inactiveTrafficConfig 3 }
|
||
|
||
inactiveDsTrafficEntry OBJECT-TYPE
|
||
SYNTAX InactiveDsTrafficEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive ds traffic table"
|
||
INDEX { inactiveDsTrafficIndex }
|
||
::= { inactiveDsTrafficTable 1 }
|
||
|
||
InactiveDsTrafficEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveDsTrafficIndex INTEGER,
|
||
inactiveDsTrafficName OCTET STRING,
|
||
inactiveDsTrafficRate INTEGER,
|
||
inactiveDsTrafficBurst INTEGER,
|
||
inactiveDsTrafficRowStatus RowStatus
|
||
}
|
||
|
||
inactiveDsTrafficIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of inactive ds traffic table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveDsTrafficEntry 1 }
|
||
|
||
inactiveDsTrafficName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ds traffic name, max length: 128."
|
||
::= { inactiveDsTrafficEntry 2 }
|
||
|
||
inactiveDsTrafficRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1677215)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport ds bandwidth rate, should be inputted with <0-1677215>."
|
||
::= { inactiveDsTrafficEntry 3 }
|
||
|
||
inactiveDsTrafficBurst OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1677215)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport ds burst size, should be inputted with <0-1677215>."
|
||
::= { inactiveDsTrafficEntry 4 }
|
||
|
||
inactiveDsTrafficRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveDsTrafficEntry 5 }
|
||
|
||
-- 1.1.2.1.1. inactiveVlanPrimaryTable --------------------------
|
||
|
||
inactiveVlanPrimaryTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveVlanPrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive vlan primary table."
|
||
::= { inactiveTrafficConfig 4 }
|
||
|
||
inactiveVlanPrimaryEntry OBJECT-TYPE
|
||
SYNTAX InactiveVlanPrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive vlan primary table"
|
||
INDEX { inactiveVlanPriIndex }
|
||
::= { inactiveVlanPrimaryTable 1 }
|
||
|
||
InactiveVlanPrimaryEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveVlanPriIndex INTEGER,
|
||
inactiveVlanPriName OCTET STRING,
|
||
inactiveVlanPriRowStatus RowStatus
|
||
}
|
||
|
||
inactiveVlanPriIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of inactive vlan table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveVlanPrimaryEntry 1 }
|
||
|
||
inactiveVlanPriName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"name of inactive vlan entry."
|
||
::= { inactiveVlanPrimaryEntry 2 }
|
||
|
||
inactiveVlanPriRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveVlanPrimaryEntry 3 }
|
||
|
||
-- 1.1.2.2. inactiveDbaTable ------------------------------
|
||
inactiveDbaTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveDbaEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain dba table"
|
||
::= { deployInactive 2 }
|
||
|
||
inactiveDbaEntry OBJECT-TYPE
|
||
SYNTAX InactiveDbaEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive dba table"
|
||
INDEX { inactiveDbaIndex }
|
||
::= { inactiveDbaTable 1 }
|
||
|
||
InactiveDbaEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveDbaIndex INTEGER,
|
||
inactiveDbaName OCTET STRING,
|
||
inactiveDbaType INTEGER,
|
||
inactiveDbaFixBandwidth INTEGER,
|
||
inactiveDbaAssuredBandwidth INTEGER,
|
||
inactiveDbaMaxBandwidth INTEGER,
|
||
inactiveDbaRowStatus RowStatus,
|
||
inactiveDbaMethod INTEGER
|
||
}
|
||
|
||
inactiveDbaIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of inactive dba table, should be inputted with <0-127>."
|
||
::= { inactiveDbaEntry 1 }
|
||
|
||
inactiveDbaName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive dba name, max length: 128."
|
||
::= { inactiveDbaEntry 2 }
|
||
|
||
inactiveDbaType OBJECT-TYPE
|
||
SYNTAX INTEGER(1..5)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveDbaType,
|
||
1 fixed bandwidth
|
||
2 assured bandwidth
|
||
3 assured and max bandwidth
|
||
4 max bandwidth
|
||
5 fixed and assured and max bandwidth"
|
||
::= { inactiveDbaEntry 3 }
|
||
|
||
inactiveDbaFixBandwidth OBJECT-TYPE
|
||
SYNTAX INTEGER(128..1310720)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Must to be divisible by 64kbps, must not less than 128 kbps."
|
||
::= { inactiveDbaEntry 4 }
|
||
|
||
inactiveDbaAssuredBandwidth OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1310592)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Must to be divisible by 64kbps, Can be 0.
|
||
If not 0, it must be at least 256 kbps."
|
||
::= { inactiveDbaEntry 5 }
|
||
|
||
inactiveDbaMaxBandwidth OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1310720)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Must to be divisible by 64kbps, and must not be less than
|
||
the sum of assured BW plus fixedBW.
|
||
Must less than 1310720 kbps"
|
||
::= { inactiveDbaEntry 6 }
|
||
|
||
inactiveDbaRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveDbaEntry 7 }
|
||
|
||
inactiveDbaMethod OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
NSR(0),
|
||
SR(1)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"dba method.
|
||
0(default): not SR
|
||
1: SR"
|
||
::= { inactiveDbaEntry 8 }
|
||
|
||
-- 1.1.2.3. inactiveLineCommonConfig ----------------------
|
||
inactiveLineCommonConfig OBJECT IDENTIFIER ::= { deployInactive 3 }
|
||
|
||
-- 1.1.2.3.1. inactiveLinePrimaryTable
|
||
-- 1.1.2.3.2. inactiveLineTcontTable
|
||
-- 1.1.2.3.3. inactiveLineGemportTable
|
||
-- 1.1.2.3.4. inactiveLineFlowmappingTable
|
||
-- 1.1.2.3.5. inactiveLineAttrMgmtTable
|
||
-- 1.1.2.3.6. inactiveLineCportTable
|
||
-- 1.1.2.3.7. inactiveLineAlarmRefTable
|
||
|
||
-- 1.1.2.3.1. inactiveLinePrimaryTable --------------------
|
||
inactiveLinePrimaryTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveLinePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain line primary table"
|
||
::= { inactiveLineCommonConfig 1 }
|
||
|
||
inactiveLinePrimaryEntry OBJECT-TYPE
|
||
SYNTAX InactiveLinePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive line primary table"
|
||
INDEX { inactiveLineIndex }
|
||
::= { inactiveLinePrimaryTable 1 }
|
||
|
||
InactiveLinePrimaryEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveLineIndex INTEGER,
|
||
inactiveLineDeviceType OCTET STRING,
|
||
inactiveLineName OCTET STRING,
|
||
inactiveLineTrafficMode INTEGER,
|
||
inactiveLineMappingMode INTEGER,
|
||
inactiveLineRowStatus RowStatus,
|
||
inactiveLineFecSwitch INTEGER
|
||
}
|
||
|
||
inactiveLineIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveLinePrimaryEntry 1 }
|
||
|
||
inactiveLineDeviceType OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(7..16))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineDeviceType:
|
||
x30-420 4ETH+2POTS SFU
|
||
t10-100 1ETH SFU
|
||
t10-420 4ETH+2POTS SFU
|
||
t10-214 2ETH(1ETH+1iTV)+1POTS SFU
|
||
t10-423 4ETH+2POTS+WIFI+USB HGU
|
||
t10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU
|
||
t10-403 4ETH+WIFI+USB HGU
|
||
t60-100 1ETH SFU
|
||
c40-100 1ETH SFU
|
||
c30-420 4ETH+2POTS SFU
|
||
c40-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU
|
||
c30-401 4ETH+WIFI HGU
|
||
c30-423 4ETH+2POTS+WIFI+USB HGU
|
||
c31-423 4ETH+2POTS+WIFI+USB HGU+SFU
|
||
c30-214 2ETH(1ETH+1iTV)+1POTS SFU
|
||
c40-210 1GE+1FE+1POTS HGU
|
||
c30-400 4ETH SFU
|
||
c40-201 2ETH+WIFI HGU
|
||
c40-429 4ETH+2POTS+CATV+WIFI HGU
|
||
c40-428 4ETH+2POTS+CATV HGU
|
||
c40-218 2ETH+1POTS+CATV HGU
|
||
m50-420 4ETH+2POTS SFU
|
||
f10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU
|
||
h60-100 1ETH SFU
|
||
s10-214 2ETH(1ETH+1iTV)+1POTS HGU
|
||
s30-100 1ETH SFU
|
||
n20-100 1ETH SFU
|
||
n20-400 4ETH SFU
|
||
n40-100 1ETH SFU
|
||
n70-400 4ETH SFU
|
||
n71-400 4ETH SFU
|
||
n71-408 4ETH+CATV SFU
|
||
n71-401 4ETH+WIFI HGU
|
||
n71-409 4ETH+CATV+WIFI HGU
|
||
n40-428-1 4ETH+2POTS+CATV+PoE HGU
|
||
n40-100-1 1ETH+PoE SFU
|
||
n40-400-1 4ETH+PoE SFU
|
||
n40-420-1 4ETH+2POTS+PoE HGU
|
||
n40-429 4ETH+2POTS+CATV+WIFI HGU
|
||
n40-800-1 8ETH+PoE MDU
|
||
d10-423 4ETH+2POTS+WIFI+USB HGU
|
||
l30-100 1ETH SFU
|
||
l30-210 2ETH+1POTS SFU
|
||
g40-108 1ETH+CATV SFU"
|
||
::= { inactiveLinePrimaryEntry 2 }
|
||
|
||
inactiveLineName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"line name, max length: 128."
|
||
::= { inactiveLinePrimaryEntry 3 }
|
||
|
||
inactiveLineTrafficMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineTrafficMode:
|
||
0 pri-queue: priority queue scheduling
|
||
1 gem-car: GEM traffic control"
|
||
::= { inactiveLinePrimaryEntry 4 }
|
||
|
||
inactiveLineMappingMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..6)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineMappingMode:
|
||
0 vlan
|
||
1 priority
|
||
2 vlan-priority
|
||
3 port
|
||
4 port-vlan
|
||
5 port-priority
|
||
6 port-vlan-priority"
|
||
::= { inactiveLinePrimaryEntry 5 }
|
||
|
||
inactiveLineRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveLinePrimaryEntry 6 }
|
||
|
||
inactiveLineFecSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineFecSwitch:
|
||
0 false (default)
|
||
1 true"
|
||
::= { inactiveLinePrimaryEntry 7 }
|
||
|
||
-- 1.1.2.3.2. inactiveLineTcontTable ----------------------
|
||
inactiveLineTcontTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveLineTcontEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain line tcont table, now only for tcont bind dba."
|
||
::= { inactiveLineCommonConfig 2 }
|
||
|
||
inactiveLineTcontEntry OBJECT-TYPE
|
||
SYNTAX InactiveLineTcontEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive line tcont table"
|
||
INDEX { inactiveLineIndexI, inactiveLineTcontIndex }
|
||
::= { inactiveLineTcontTable 1 }
|
||
|
||
InactiveLineTcontEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveLineIndexI INTEGER,
|
||
inactiveLineTcontIndex INTEGER,
|
||
inactiveLineTcontDbaIndex INTEGER,
|
||
inactiveLineTcontRowStatus RowStatus
|
||
}
|
||
|
||
inactiveLineIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveLineTcontEntry 1 }
|
||
|
||
inactiveLineTcontIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of tcont, the 2nd index of this table.
|
||
Should in <1-8>."
|
||
::= { inactiveLineTcontEntry 2 }
|
||
|
||
inactiveLineTcontDbaIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of tcont bind dba, should be inputted with <0-127>."
|
||
::= { inactiveLineTcontEntry 3 }
|
||
|
||
inactiveLineTcontRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveLineTcontEntry 4 }
|
||
|
||
-- 1.1.2.3.3. inactiveLineGemportTable --------------------
|
||
inactiveLineGemportTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveLineGemportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain line gemport table."
|
||
::= { inactiveLineCommonConfig 3 }
|
||
|
||
inactiveLineGemportEntry OBJECT-TYPE
|
||
SYNTAX InactiveLineGemportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive line gemport table"
|
||
INDEX { inactiveLineIndexII, inactiveLineGemportIndex }
|
||
::= { inactiveLineGemportTable 1 }
|
||
|
||
InactiveLineGemportEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveLineIndexII INTEGER,
|
||
inactiveLineGemportIndex INTEGER,
|
||
inactiveLineGemportTcontId INTEGER,
|
||
inactiveLineGemportVlanProfileId INTEGER,
|
||
inactiveLineGemportUsProfileId INTEGER,
|
||
inactiveLineGemportDsProfileId INTEGER,
|
||
inactiveLineGemportRowStatus RowStatus
|
||
}
|
||
|
||
inactiveLineIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveLineGemportEntry 1 }
|
||
|
||
inactiveLineGemportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..24)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of gemport, the 2nd index of this table.
|
||
Should in <1-24>."
|
||
::= { inactiveLineGemportEntry 2 }
|
||
|
||
inactiveLineGemportTcontId OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport bind tcont index, should be inputted with <1-8>."
|
||
::= { inactiveLineGemportEntry 3 }
|
||
|
||
inactiveLineGemportVlanProfileId OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport vlan profile id, should be inputted with <0-4095>."
|
||
::= { inactiveLineGemportEntry 4 }
|
||
|
||
inactiveLineGemportUsProfileId OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport us traffic profile id, should be inputted with <0-4095>."
|
||
::= { inactiveLineGemportEntry 5 }
|
||
|
||
inactiveLineGemportDsProfileId OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport ds traffic profile id, should be inputted with <0-4095>."
|
||
::= { inactiveLineGemportEntry 6 }
|
||
|
||
inactiveLineGemportRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveLineGemportEntry 7 }
|
||
|
||
-- 1.1.2.3.4. inactiveLineFlowmappingTable ----------------
|
||
inactiveLineFlowmappingTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveLineFlowmappingEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain line flow mapping table."
|
||
::= { inactiveLineCommonConfig 4 }
|
||
|
||
inactiveLineFlowmappingEntry OBJECT-TYPE
|
||
SYNTAX InactiveLineFlowmappingEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive line flow mapping table"
|
||
INDEX { inactiveLineIndexIII, inactiveLineFlowmappingIndex }
|
||
::= { inactiveLineFlowmappingTable 1 }
|
||
|
||
InactiveLineFlowmappingEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveLineIndexIII INTEGER,
|
||
inactiveLineFlowmappingIndex INTEGER,
|
||
inactiveLineFlowmappingVid INTEGER,
|
||
inactiveLineFlowmappingPriority INTEGER,
|
||
inactiveLineFlowmappingEthport INTEGER,
|
||
inactiveLineFlowmappingGemport INTEGER,
|
||
inactiveLineFlowmappingType INTEGER,
|
||
inactiveLineFlowmappingRowStatus RowStatus
|
||
}
|
||
|
||
inactiveLineIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveLineFlowmappingEntry 1 }
|
||
|
||
inactiveLineFlowmappingIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..47)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of flowmapping, the 2nd index of this table. Should in <1-48>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveLineFlowmappingEntry 2 }
|
||
|
||
inactiveLineFlowmappingVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping vid, should be inputted with <1-4094>."
|
||
::= { inactiveLineFlowmappingEntry 3 }
|
||
|
||
inactiveLineFlowmappingPriority OBJECT-TYPE
|
||
SYNTAX INTEGER(0..8)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping priority, should be inputted with <0-8>.
|
||
default value 8 means don't care 802.1p priority."
|
||
::= { inactiveLineFlowmappingEntry 4 }
|
||
|
||
inactiveLineFlowmappingEthport OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping ethernet port id, should be inputted with <1-8>."
|
||
::= { inactiveLineFlowmappingEntry 5 }
|
||
|
||
inactiveLineFlowmappingGemport OBJECT-TYPE
|
||
SYNTAX INTEGER(1..24)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping gem port id, should be inputted with <1-24>."
|
||
::= { inactiveLineFlowmappingEntry 6 }
|
||
|
||
inactiveLineFlowmappingType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineFlowmappingType:
|
||
0 flowmapping not base port.
|
||
1 flowmapping base eth port.
|
||
2 flowmapping base veip port.
|
||
3. flowmapping base iphost port."
|
||
::= { inactiveLineFlowmappingEntry 7 }
|
||
|
||
inactiveLineFlowmappingRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveLineFlowmappingEntry 8 }
|
||
|
||
-- 1.1.2.3.5. inactiveLineAttrMgmtTable --------------------
|
||
inactiveLineAttrMgmtTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveLineAttrMgmtEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain line attribute management table."
|
||
::= { inactiveLineCommonConfig 5 }
|
||
|
||
inactiveLineAttrMgmtEntry OBJECT-TYPE
|
||
SYNTAX InactiveLineAttrMgmtEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive line attribute management table"
|
||
INDEX { inactiveLineIndexIV, inactiveLineAttrMgmtIndex }
|
||
::= { inactiveLineAttrMgmtTable 1 }
|
||
|
||
InactiveLineAttrMgmtEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveLineIndexIV INTEGER,
|
||
inactiveLineAttrMgmtIndex INTEGER,
|
||
inactiveLineAttrMgmtNportType INTEGER,
|
||
inactiveLineAttrMgmtNport INTEGER,
|
||
inactiveLineAttrMgmtEtypeFilter INTEGER,
|
||
inactiveLineAttrMgmtVlanMode INTEGER,
|
||
inactiveLineAttrMgmtCvlanVid INTEGER,
|
||
inactiveLineAttrMgmtCvlanPri INTEGER,
|
||
inactiveLineAttrMgmtSvlanVid INTEGER,
|
||
inactiveLineAttrMgmtSvlanPri INTEGER,
|
||
inactiveLineAttrMgmtRowStatus RowStatus
|
||
}
|
||
|
||
inactiveLineIndexIV OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveLineAttrMgmtEntry 1 }
|
||
|
||
inactiveLineAttrMgmtIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..63)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of attribute management, the 2nd index of this table. Should in <1-64>."
|
||
::= { inactiveLineAttrMgmtEntry 2 }
|
||
|
||
inactiveLineAttrMgmtNportType OBJECT-TYPE
|
||
SYNTAX INTEGER(1..3)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineAttrMgmtNportType:
|
||
1 eth port in sfu
|
||
2 veip port in hgu
|
||
3 iphost virtual port, for voip, tdm, etc."
|
||
::= { inactiveLineAttrMgmtEntry 3 }
|
||
|
||
inactiveLineAttrMgmtNport OBJECT-TYPE
|
||
SYNTAX INTEGER(1..64)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The port of attribute management, if eport, should in <1-8>."
|
||
::= { inactiveLineAttrMgmtEntry 4 }
|
||
|
||
inactiveLineAttrMgmtEtypeFilter OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineAttrMgmtEtypeFilter:
|
||
0 no filter
|
||
1 filter ipoe frame
|
||
2 filter pppoe frame
|
||
3 filter arp frame"
|
||
::= { inactiveLineAttrMgmtEntry 5 }
|
||
|
||
inactiveLineAttrMgmtVlanMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineAttrMgmtVlanMode:
|
||
0 transparent
|
||
1 tag
|
||
2 translation
|
||
3 trunk
|
||
4 QinQ"
|
||
::= { inactiveLineAttrMgmtEntry 6 }
|
||
|
||
inactiveLineAttrMgmtCvlanVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"cvlan vid, should be inputted with <1-4094>."
|
||
::= { inactiveLineAttrMgmtEntry 7 }
|
||
|
||
inactiveLineAttrMgmtCvlanPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..8)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The cvlan priority, should be inputted with <0-8>.
|
||
Value 8 means don't care vlan priority."
|
||
::= { inactiveLineAttrMgmtEntry 8 }
|
||
|
||
inactiveLineAttrMgmtSvlanVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"svlan vid, should be inputted with <1-4094>."
|
||
::= { inactiveLineAttrMgmtEntry 9 }
|
||
|
||
inactiveLineAttrMgmtSvlanPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..8)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"svlan priority, should be inputted with <0-8>.
|
||
Value 8 means don't care vlan priority."
|
||
::= { inactiveLineAttrMgmtEntry 10 }
|
||
|
||
inactiveLineAttrMgmtRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveLineAttrMgmtEntry 11 }
|
||
|
||
-- 1.1.2.3.6. inactiveLineCportTable --------------------
|
||
inactiveLineCportTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveLineCportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain line catv port management table."
|
||
::= { inactiveLineCommonConfig 6 }
|
||
|
||
inactiveLineCportEntry OBJECT-TYPE
|
||
SYNTAX InactiveLineCportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive line catv port management table"
|
||
INDEX { inactiveLineIndexX, inactiveLineCportIndex }
|
||
::= { inactiveLineCportTable 1 }
|
||
|
||
InactiveLineCportEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveLineIndexX INTEGER,
|
||
inactiveLineCportIndex INTEGER,
|
||
inactiveLineCportSwitch INTEGER,
|
||
inactiveLineCportAgcMode INTEGER,
|
||
inactiveLineCportAgcRange INTEGER
|
||
}
|
||
|
||
inactiveLineIndexX OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveLineCportEntry 1 }
|
||
|
||
inactiveLineCportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of catv port management, the 2nd index of this table. Should in <1-4>."
|
||
::= { inactiveLineCportEntry 2 }
|
||
|
||
inactiveLineCportSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineCportSwitch:
|
||
0 disable
|
||
1 enable(default)"
|
||
::= { inactiveLineCportEntry 3 }
|
||
|
||
inactiveLineCportAgcMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineCportAgcMode:
|
||
0 No AGC
|
||
1 Broadband RF AGC
|
||
2 Optical AGC"
|
||
::= { inactiveLineCportEntry 4 }
|
||
|
||
inactiveLineCportAgcRange OBJECT-TYPE
|
||
SYNTAX INTEGER(-120..60)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"catv port agc range, default: 0."
|
||
::= { inactiveLineCportEntry 5 }
|
||
|
||
-- 1.1.2.3.7. inactiveLineAlarmRefTable --------------------
|
||
inactiveLineAlarmRefTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveLineAlarmRefEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive line alarm Reference table."
|
||
::= { inactiveLineCommonConfig 7 }
|
||
|
||
inactiveLineAlarmRefEntry OBJECT-TYPE
|
||
SYNTAX InactiveLineAlarmRefEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive line alarm Reference table"
|
||
INDEX { inactiveLineAlarmRefLIndex }
|
||
::= { inactiveLineAlarmRefTable 1 }
|
||
|
||
InactiveLineAlarmRefEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveLineAlarmRefLIndex INTEGER,
|
||
inactiveLineAlarmRefAIndex INTEGER,
|
||
inactiveLineAlarmRefAName OCTET STRING,
|
||
inactiveLineAlarmRefRowStatus RowStatus
|
||
}
|
||
|
||
inactiveLineAlarmRefLIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The line index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveLineAlarmRefEntry 1 }
|
||
|
||
inactiveLineAlarmRefAIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of alarm table to reference, Should in <0-127>."
|
||
::= { inactiveLineAlarmRefEntry 2 }
|
||
|
||
inactiveLineAlarmRefAName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..128))
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The entry name of alarm table to reference, Should in <1-128>."
|
||
::= { inactiveLineAlarmRefEntry 3 }
|
||
|
||
inactiveLineAlarmRefRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The row status of inactive line alarm Reference table."
|
||
::= { inactiveLineAlarmRefEntry 4 }
|
||
|
||
-- 1.1.2.4. inactiveLineSFUConfig --------------------------
|
||
inactiveLineSFUConfig OBJECT IDENTIFIER ::= { deployInactive 4 }
|
||
|
||
-- 1.1.2.4.1. inactiveLineSFUTable
|
||
-- 1.1.2.4.2. inactiveLineSFUEthportTable
|
||
|
||
-- 1.1.2.4.1. inactiveLineSFUTable ------------------------
|
||
inactiveLineSFUTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveLineSFUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain line SFU primary table."
|
||
::= { inactiveLineSFUConfig 1 }
|
||
|
||
inactiveLineSFUEntry OBJECT-TYPE
|
||
SYNTAX InactiveLineSFUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive line sfu primary table"
|
||
INDEX { inactiveLineIndexV }
|
||
::= { inactiveLineSFUTable 1 }
|
||
|
||
InactiveLineSFUEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveLineIndexV INTEGER,
|
||
inactiveLineSfuLocalSwitch INTEGER,
|
||
inactiveLineSfuLoopDetectSwitch INTEGER
|
||
}
|
||
|
||
inactiveLineIndexV OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveLineSFUEntry 1 }
|
||
|
||
inactiveLineSfuLocalSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineSfuLocalSwitch:
|
||
0 disable(default)
|
||
1 enable."
|
||
::= { inactiveLineSFUEntry 2 }
|
||
|
||
inactiveLineSfuLoopDetectSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineSfuLoopDetectSwitch:
|
||
0 disable(default)
|
||
1 enable."
|
||
::= { inactiveLineSFUEntry 3 }
|
||
|
||
-- 1.1.2.4.2. inactiveLineSFUEthportTable ------------------
|
||
inactiveLineSFUEthportTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveLineSFUEthportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain line SFU ethernet port table."
|
||
::= { inactiveLineSFUConfig 2 }
|
||
|
||
inactiveLineSFUEthportEntry OBJECT-TYPE
|
||
SYNTAX InactiveLineSFUEthportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive line SFU ethernet port table"
|
||
INDEX { inactiveLineIndexVI, inactiveLineSfuEthportIndex }
|
||
::= { inactiveLineSFUEthportTable 1 }
|
||
|
||
InactiveLineSFUEthportEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveLineIndexVI INTEGER,
|
||
inactiveLineSfuEthportIndex INTEGER,
|
||
inactiveLineSfuEthportSwitch INTEGER,
|
||
inactiveLineSfuEthportFlowCtrlSwitch INTEGER,
|
||
inactiveLineSfuEthportLoopbackSwitch INTEGER,
|
||
inactiveLineSfuEthportFastLeaveSwitch INTEGER,
|
||
inactiveLineSfuEthportMaxGroups INTEGER,
|
||
inactiveLineSfuEthportMaxMacCount INTEGER,
|
||
inactiveLineSfuEthportMcastMode INTEGER,
|
||
inactiveLineSfuEthportDsIgmpControlType INTEGER,
|
||
inactiveLineSfuEthportDsIgmpVid INTEGER,
|
||
inactiveLineSfuEthportDsIgmpPri INTEGER,
|
||
inactiveLineSfuEthportDsIgmpRowStatus RowStatus,
|
||
inactiveLineSfuEthportUsIgmpControlType INTEGER,
|
||
inactiveLineSfuEthportUsIgmpVid INTEGER,
|
||
inactiveLineSfuEthportUsIgmpPri INTEGER,
|
||
inactiveLineSfuEthportUsIgmpRowStatus RowStatus,
|
||
inactiveLineSfuEthportBwCir INTEGER,
|
||
inactiveLineSfuEthportBwCbs INTEGER,
|
||
inactiveLineSfuEthportBwPir INTEGER,
|
||
inactiveLineSfuEthportBwPbs INTEGER,
|
||
inactiveLineSfuEthportBwRowStatus RowStatus
|
||
}
|
||
|
||
inactiveLineIndexVI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveLineSFUEthportEntry 1 }
|
||
|
||
inactiveLineSfuEthportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>."
|
||
::= { inactiveLineSFUEthportEntry 2 }
|
||
|
||
inactiveLineSfuEthportSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineSfuEthportSwitch:
|
||
0 no shutdown(default)
|
||
1 shutdown"
|
||
::= { inactiveLineSFUEthportEntry 3 }
|
||
|
||
inactiveLineSfuEthportFlowCtrlSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineSfuEthportFlowCtrlSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { inactiveLineSFUEthportEntry 4 }
|
||
|
||
inactiveLineSfuEthportLoopbackSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineSfuEthportLoopbackSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { inactiveLineSFUEthportEntry 5 }
|
||
|
||
inactiveLineSfuEthportFastLeaveSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineSfuEthportFastLeaveSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { inactiveLineSFUEthportEntry 6 }
|
||
|
||
inactiveLineSfuEthportMaxGroups OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port max igmp groups, should be inputted with <1-128>."
|
||
::= { inactiveLineSFUEthportEntry 7 }
|
||
|
||
inactiveLineSfuEthportMaxMacCount OBJECT-TYPE
|
||
SYNTAX INTEGER(1..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port max mac address count, should be inputted with <1-255>."
|
||
::= { inactiveLineSFUEthportEntry 8 }
|
||
|
||
inactiveLineSfuEthportMcastMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineSfuEthportMcastMode(some ont not support):
|
||
0 control
|
||
1 igmp snooping
|
||
2 unconcern(default)"
|
||
::= { inactiveLineSFUEthportEntry 9 }
|
||
|
||
inactiveLineSfuEthportDsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineSfuEthportDsIgmpControlType:
|
||
0 transparent(default, only for read)
|
||
1 strip outer tag
|
||
2 add tag
|
||
3 replace tag
|
||
4 replace only vid
|
||
5 add only vid"
|
||
::= { inactiveLineSFUEthportEntry 10 }
|
||
|
||
inactiveLineSfuEthportDsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port downstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { inactiveLineSFUEthportEntry 11 }
|
||
|
||
inactiveLineSfuEthportDsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { inactiveLineSFUEthportEntry 12 }
|
||
|
||
inactiveLineSfuEthportDsIgmpRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus for ethport ds igmp tag control."
|
||
::= { inactiveLineSFUEthportEntry 13 }
|
||
|
||
inactiveLineSfuEthportUsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineSfuEthportUsIgmpControlType:
|
||
0 transparent(default, only for read)
|
||
1 add tag
|
||
2 replace tag
|
||
3 replace only vid
|
||
4 add only vid"
|
||
::= { inactiveLineSFUEthportEntry 14 }
|
||
|
||
inactiveLineSfuEthportUsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port upstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { inactiveLineSFUEthportEntry 15 }
|
||
|
||
inactiveLineSfuEthportUsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { inactiveLineSFUEthportEntry 16 }
|
||
|
||
inactiveLineSfuEthportUsIgmpRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus for ethport us igmp tag control."
|
||
::= { inactiveLineSFUEthportEntry 17 }
|
||
|
||
inactiveLineSfuEthportBwCir OBJECT-TYPE
|
||
SYNTAX INTEGER(64..1024000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port bandwidth egress cir, should be inputted with <64-1024000>."
|
||
::= { inactiveLineSFUEthportEntry 18 }
|
||
|
||
inactiveLineSfuEthportBwCbs OBJECT-TYPE
|
||
SYNTAX INTEGER(2..32000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port bandwidth egress cbs, should be inputted with <2-32000>."
|
||
::= { inactiveLineSFUEthportEntry 19 }
|
||
|
||
inactiveLineSfuEthportBwPir OBJECT-TYPE
|
||
SYNTAX INTEGER(64..1024000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port bandwidth egress pir, should be inputted with <64-1024000>."
|
||
::= { inactiveLineSFUEthportEntry 20 }
|
||
|
||
inactiveLineSfuEthportBwPbs OBJECT-TYPE
|
||
SYNTAX INTEGER(2..32000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port bandwidth egress pbs, should be inputted with <2-32000>."
|
||
::= { inactiveLineSFUEthportEntry 21 }
|
||
|
||
inactiveLineSfuEthportBwRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus for ethernet port bandwidth egress."
|
||
::= { inactiveLineSFUEthportEntry 22 }
|
||
|
||
-- 1.1.2.5. inactiveLineHGUConfig --------------------------
|
||
inactiveLineHGUConfig OBJECT IDENTIFIER ::= { deployInactive 5 }
|
||
|
||
-- 1.1.2.5.1. inactiveLineHGUTable
|
||
|
||
-- 1.1.2.5.1. inactiveLineHGUTable ------------------------
|
||
inactiveLineHGUTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveLineHGUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain line HGU table."
|
||
::= { inactiveLineHGUConfig 1 }
|
||
|
||
inactiveLineHGUEntry OBJECT-TYPE
|
||
SYNTAX InactiveLineHGUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive line HGU table"
|
||
INDEX { inactiveLineIndexVIII }
|
||
::= { inactiveLineHGUTable 1 }
|
||
|
||
InactiveLineHGUEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveLineIndexVIII INTEGER,
|
||
inactiveLineHguSwitch INTEGER,
|
||
inactiveLineHguFastLeaveSwitch INTEGER,
|
||
inactiveLineHguMaxGroups INTEGER,
|
||
inactiveLineHguMaxMacCount INTEGER,
|
||
inactiveLineHguMcastMode INTEGER,
|
||
inactiveLineHguDsIgmpControlType INTEGER,
|
||
inactiveLineHguDsIgmpVid INTEGER,
|
||
inactiveLineHguDsIgmpPri INTEGER,
|
||
inactiveLineHguDsIgmpRowStatus RowStatus,
|
||
inactiveLineHguUsIgmpControlType INTEGER,
|
||
inactiveLineHguUsIgmpVid INTEGER,
|
||
inactiveLineHguUsIgmpPri INTEGER,
|
||
inactiveLineHguUsIgmpRowStatus RowStatus,
|
||
inactiveLineHguMcastEportSwitch INTEGER
|
||
}
|
||
|
||
inactiveLineIndexVIII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveLineHGUEntry 1 }
|
||
|
||
inactiveLineHguSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineHguSwitch:
|
||
0 no shutdown(default)
|
||
1 shutdown"
|
||
::= { inactiveLineHGUEntry 2 }
|
||
|
||
inactiveLineHguFastLeaveSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineHguFlowCtrlSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { inactiveLineHGUEntry 3 }
|
||
|
||
inactiveLineHguMaxGroups OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU max igmp groups, should be inputted with <1-128>."
|
||
::= { inactiveLineHGUEntry 4 }
|
||
|
||
inactiveLineHguMaxMacCount OBJECT-TYPE
|
||
SYNTAX INTEGER(1..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU max mac address count, should be inputted with <1-255>."
|
||
::= { inactiveLineHGUEntry 5 }
|
||
|
||
inactiveLineHguMcastMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineHguMcastMode(some ont not support):
|
||
0 control
|
||
1 igmp snooping
|
||
2 unconcern(default)"
|
||
::= { inactiveLineHGUEntry 6 }
|
||
|
||
inactiveLineHguDsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineHguDsIgmpControlType:
|
||
0 transparent(default)
|
||
1 strip outer tag
|
||
2 add tag
|
||
3 replace tag
|
||
4 replace only vid
|
||
5 add only vid"
|
||
::= { inactiveLineHGUEntry 7 }
|
||
|
||
inactiveLineHguDsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU downstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { inactiveLineHGUEntry 8 }
|
||
|
||
inactiveLineHguDsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { inactiveLineHGUEntry 9 }
|
||
|
||
inactiveLineHguDsIgmpRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus for ds igmp tag control."
|
||
::= { inactiveLineHGUEntry 10 }
|
||
|
||
inactiveLineHguUsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineHguUsIgmpControlType:
|
||
0 transparent(default)
|
||
1 add tag
|
||
2 replace tag
|
||
3 replace only vid
|
||
4 add only vid"
|
||
::= { inactiveLineHGUEntry 11 }
|
||
|
||
inactiveLineHguUsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU upstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { inactiveLineHGUEntry 12 }
|
||
|
||
inactiveLineHguUsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { inactiveLineHGUEntry 13 }
|
||
|
||
inactiveLineHguUsIgmpRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus for us igmp tag control."
|
||
::= { inactiveLineHGUEntry 14 }
|
||
|
||
inactiveLineHguMcastEportSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveLineHguMcastEportSwitch:
|
||
0 disable Hgu ctrl mcast base on eport(default)
|
||
1 enable Hgu ctrl mcast base on eport"
|
||
::= { inactiveLineHGUEntry 15 }
|
||
|
||
-- 1.1.2.6. inactiveRuleTable ------------------------------
|
||
inactiveRuleTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveRuleEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain rule table"
|
||
::= { deployInactive 6 }
|
||
|
||
inactiveRuleEntry OBJECT-TYPE
|
||
SYNTAX InactiveRuleEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive rule table"
|
||
INDEX { inactiveRuleIndex }
|
||
::= { inactiveRuleTable 1 }
|
||
|
||
InactiveRuleEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveRuleIndex INTEGER,
|
||
inactiveRuleName OCTET STRING,
|
||
inactiveRuleAction INTEGER,
|
||
inactiveRuleAuthMode INTEGER,
|
||
inactiveRuleAuthSn OCTET STRING,
|
||
inactiveRuleAuthPw OCTET STRING,
|
||
inactiveRuleAuthLoid OCTET STRING,
|
||
inactiveRuleAuthLopw OCTET STRING,
|
||
inactiveRuleAssignedSlot OCTET STRING,
|
||
inactiveRuleAssignedPport OCTET STRING,
|
||
inactiveRuleAssignedOnt OCTET STRING,
|
||
inactiveRuleLineIndexesStr OCTET STRING,
|
||
inactiveRuleDefaultLine INTEGER,
|
||
inactiveRuleRowStatus RowStatus,
|
||
inactiveRuleOnceOnSwitch INTEGER,
|
||
inactiveRuleOnceOnAgingTime INTEGER,
|
||
inactiveRuleAuthSnFmt INTEGER,
|
||
inactiveRuleAuthPwFmt INTEGER,
|
||
inactiveRuleOntStatus INTEGER
|
||
}
|
||
|
||
inactiveRuleIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of rule table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveRuleEntry 1 }
|
||
|
||
inactiveRuleName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"rule description, max length: 128."
|
||
::= { inactiveRuleEntry 2 }
|
||
|
||
inactiveRuleAction OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveRuleAction:
|
||
0 permit
|
||
1 deny"
|
||
::= { inactiveRuleEntry 3 }
|
||
|
||
inactiveRuleAuthMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveRuleAuthMode:
|
||
0 auth mode sn
|
||
1 auth mode pw
|
||
2 auth mode sn_pw
|
||
3 auth mode loid
|
||
4 auth mode lopw
|
||
5 auth mode loid_lopw"
|
||
::= { inactiveRuleEntry 4 }
|
||
|
||
inactiveRuleAuthSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(13..16))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth sn, mix(string-hex) format or hex format.
|
||
length:
|
||
mix: 13
|
||
hex: 16
|
||
you can use '*' represents any one character or hexadecimal number."
|
||
::= { inactiveRuleEntry 5 }
|
||
|
||
inactiveRuleAuthPw OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..20))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth password, string format or hex format.
|
||
max length:
|
||
string: 10
|
||
hex: 20
|
||
you can use '*' represents any one character or hexadecimal number"
|
||
::= { inactiveRuleEntry 6 }
|
||
|
||
inactiveRuleAuthLoid OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth loid, string format, max length: 24.
|
||
you can use '*' represents any one character or hexadecimal number"
|
||
::= { inactiveRuleEntry 7 }
|
||
|
||
inactiveRuleAuthLopw OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth logic password, string format, max length: 12.
|
||
you can use '*' represents any one character or hexadecimal number"
|
||
::= { inactiveRuleEntry 8 }
|
||
|
||
inactiveRuleAssignedSlot OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slot id pre assigned. if not configed, its '-'."
|
||
::= { inactiveRuleEntry 9 }
|
||
|
||
inactiveRuleAssignedPport OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pon port id pre assigned. if not configed, its '-'."
|
||
::= { inactiveRuleEntry 10 }
|
||
|
||
inactiveRuleAssignedOnt OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont id pre assigned. if not configed, its '-'."
|
||
::= { inactiveRuleEntry 11 }
|
||
|
||
inactiveRuleLineIndexesStr OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"String joined by rule bind line indexes, such as '12,56,1023'.
|
||
A rule can at most bind 8 line models."
|
||
::= { inactiveRuleEntry 12 }
|
||
|
||
inactiveRuleDefaultLine OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of rule default line, should be inputted with <1-4096>
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveRuleEntry 13 }
|
||
|
||
inactiveRuleRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveRuleEntry 14 }
|
||
|
||
inactiveRuleOnceOnSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveUniqueOnceOnSwitch:
|
||
0 always on(default)
|
||
1 once on."
|
||
::= { inactiveRuleEntry 15 }
|
||
|
||
inactiveRuleOnceOnAgingTime OBJECT-TYPE
|
||
SYNTAX INTEGER(0..168)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"aging time, hour, default value 0, means don't care aging time."
|
||
::= { inactiveRuleEntry 16 }
|
||
|
||
inactiveRuleAuthSnFmt OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
mix(0),
|
||
hex(1)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Serial number format, mixed or hexadecimal."
|
||
::= { inactiveRuleEntry 17 }
|
||
|
||
inactiveRuleAuthPwFmt OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
string(0),
|
||
hex(1)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Password format, string or hexadecimal."
|
||
::= { inactiveRuleEntry 18 }
|
||
|
||
inactiveRuleOntStatus OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
Unused(0),
|
||
Inused(1)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ont status.
|
||
0: Ont has never been online
|
||
1: Ont online or offline"
|
||
::= { inactiveRuleEntry 19 }
|
||
|
||
-- 1.1.2.7. inactiveUniqueConfig --------------------------
|
||
inactiveUniqueConfig OBJECT IDENTIFIER ::= { deployInactive 7 }
|
||
|
||
-- 1.1.2.7.1. inactiveUniquePrimaryTable
|
||
-- 1.1.2.7.2. inactiveUniqueSipAgentInfoTable
|
||
-- 1.1.2.7.3. inactiveUniqueSipUserAddrTable
|
||
-- 1.1.2.7.4. inactiveUniqueSipUserInfoTable
|
||
-- 1.1.2.7.5. inactiveUniqueSipDigitMapTable
|
||
-- 1.1.2.7.6. inactiveUniqueGemportTable
|
||
-- 1.1.2.7.7. inactiveUniqueCportTable
|
||
-- 1.1.2.7.8. inactiveUniqueEportTable
|
||
-- 1.1.2.7.9. inactiveUniqueTcontTable
|
||
-- 1.1.2.7.10. inactiveUniqueAlarmRefTable
|
||
-- 1.1.2.7.11. inactiveUniqueManageTable
|
||
-- 1.1.2.7.12. inactiveUniqueWanTable
|
||
|
||
-- 1.1.2.7.1. inactiveUniquePrimaryTable ------------------
|
||
inactiveUniquePrimaryTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniquePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain unique primary table"
|
||
::= { inactiveUniqueConfig 1 }
|
||
|
||
inactiveUniquePrimaryEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniquePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive unique primary table"
|
||
INDEX { inactiveUniqueIndex }
|
||
::= { inactiveUniquePrimaryTable 1 }
|
||
|
||
InactiveUniquePrimaryEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueIndex INTEGER,
|
||
inactiveUniqueName OCTET STRING,
|
||
inactiveUniqueSignFlag INTEGER,
|
||
inactiveUniqueSn OCTET STRING,
|
||
inactiveUniqueLoid OCTET STRING,
|
||
inactiveUniqueSlotId INTEGER,
|
||
inactiveUniquePportId INTEGER,
|
||
inactiveUniqueOntId INTEGER,
|
||
inactiveUniqueOntDesc OCTET STRING,
|
||
inactiveUniqueRowStatus RowStatus,
|
||
inactiveUniqueOnceOnSwitch INTEGER,
|
||
inactiveUniqueOnceOnAgingTime INTEGER,
|
||
inactiveUniqueRangingBalance INTEGER
|
||
}
|
||
|
||
inactiveUniqueIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of unique primary table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniquePrimaryEntry 1 }
|
||
|
||
inactiveUniqueName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"unique name, max length: 128."
|
||
::= { inactiveUniquePrimaryEntry 2 }
|
||
|
||
inactiveUniqueSignFlag OBJECT-TYPE
|
||
SYNTAX INTEGER(1..3)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveUniqueSignFlag:
|
||
1 mode sn
|
||
2 mode loid
|
||
3 mode slot-id/pport-id/ont-id."
|
||
::= { inactiveUniquePrimaryEntry 3 }
|
||
|
||
inactiveUniqueSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"unique sn, now only support string-hex format, not support hex format, max length: 13."
|
||
::= { inactiveUniquePrimaryEntry 4 }
|
||
|
||
inactiveUniqueLoid OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"unique loid, now only support string format, max length: 24."
|
||
::= { inactiveUniquePrimaryEntry 5 }
|
||
|
||
inactiveUniqueSlotId OBJECT-TYPE
|
||
SYNTAX INTEGER(0..0)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slot id."
|
||
::= { inactiveUniquePrimaryEntry 6 }
|
||
|
||
inactiveUniquePportId OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pon port id."
|
||
::= { inactiveUniquePrimaryEntry 7 }
|
||
|
||
inactiveUniqueOntId OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont id."
|
||
::= { inactiveUniquePrimaryEntry 8 }
|
||
|
||
inactiveUniqueOntDesc OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont description, max length: 128."
|
||
::= { inactiveUniquePrimaryEntry 9 }
|
||
|
||
inactiveUniqueRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveUniquePrimaryEntry 10 }
|
||
|
||
inactiveUniqueOnceOnSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveUniqueOnceOnSwitch:
|
||
0 always on(default)
|
||
1 once on."
|
||
::= { inactiveUniquePrimaryEntry 11 }
|
||
|
||
inactiveUniqueOnceOnAgingTime OBJECT-TYPE
|
||
SYNTAX INTEGER(0..168)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"aging time, default value 0, means don't care aging time."
|
||
::= { inactiveUniquePrimaryEntry 12 }
|
||
|
||
inactiveUniqueRangingBalance OBJECT-TYPE
|
||
SYNTAX INTEGER(-10000..10000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ranging balance, default value 0, unit: m."
|
||
::= { inactiveUniquePrimaryEntry 13 }
|
||
|
||
-- 1.1.2.7.2. inactiveUniqueSipAgentInfoTable --------------
|
||
inactiveUniqueSipAgentInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniqueSipAgentInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain unique voip sip agent info table"
|
||
::= { inactiveUniqueConfig 2 }
|
||
|
||
inactiveUniqueSipAgentInfoEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniqueSipAgentInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive unique voip sip agent info table"
|
||
INDEX { inactiveUniqueIndexI }
|
||
::= { inactiveUniqueSipAgentInfoTable 1 }
|
||
|
||
InactiveUniqueSipAgentInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueIndexI INTEGER,
|
||
inactiveUniqueSipProxyServerIp OCTET STRING,
|
||
inactiveUniqueSipOutboundProxyIp OCTET STRING,
|
||
inactiveUniqueSipRegisterServerIp OCTET STRING,
|
||
inactiveUniqueSipAgentInfoPort INTEGER,
|
||
inactiveUniqueSipAgentInfoRowStatus RowStatus
|
||
}
|
||
|
||
inactiveUniqueIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of unique primary table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniqueSipAgentInfoEntry 1 }
|
||
|
||
inactiveUniqueSipProxyServerIp OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..64))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info proxy server ip address."
|
||
::= { inactiveUniqueSipAgentInfoEntry 2 }
|
||
|
||
inactiveUniqueSipOutboundProxyIp OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..64))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info outbound proxy ip address."
|
||
::= { inactiveUniqueSipAgentInfoEntry 3 }
|
||
|
||
inactiveUniqueSipRegisterServerIp OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..64))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info register server ip address."
|
||
::= { inactiveUniqueSipAgentInfoEntry 4 }
|
||
|
||
inactiveUniqueSipAgentInfoPort OBJECT-TYPE
|
||
SYNTAX INTEGER(1..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info port."
|
||
::= { inactiveUniqueSipAgentInfoEntry 5 }
|
||
|
||
inactiveUniqueSipAgentInfoRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveUniqueSipAgentInfoEntry 6 }
|
||
|
||
-- 1.1.2.7.3. inactiveUniqueSipUserAddrTable --------------
|
||
inactiveUniqueSipUserAddrTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniqueSipUserAddrEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain unique voip sip user ip address table"
|
||
::= { inactiveUniqueConfig 3 }
|
||
|
||
inactiveUniqueSipUserAddrEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniqueSipUserAddrEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive unique voip sip user ip address table"
|
||
INDEX { inactiveUniqueIndexII }
|
||
::= { inactiveUniqueSipUserAddrTable 1 }
|
||
|
||
InactiveUniqueSipUserAddrEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueIndexII INTEGER,
|
||
inactiveUniqueSipuAddressIp IpAddress,
|
||
inactiveUniqueSipuAddressMask IpAddress,
|
||
inactiveUniqueSipuAddressVlan INTEGER,
|
||
inactiveUniqueSipuAddressPri INTEGER,
|
||
inactiveUniqueSipuAddressRowStatus RowStatus,
|
||
inactiveUniqueSipuAddressGateway IpAddress,
|
||
inactiveUniqueSipuAddressMasterDns IpAddress,
|
||
inactiveUniqueSipuAddressSlaveDns IpAddress,
|
||
inactiveUniqueSipuAddressHost INTEGER,
|
||
inactiveUniqueSipuAddressMode INTEGER
|
||
}
|
||
|
||
inactiveUniqueIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of unique primary table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniqueSipUserAddrEntry 1 }
|
||
|
||
inactiveUniqueSipuAddressIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user ip address."
|
||
::= { inactiveUniqueSipUserAddrEntry 2 }
|
||
|
||
inactiveUniqueSipuAddressMask OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user mask."
|
||
::= { inactiveUniqueSipUserAddrEntry 3 }
|
||
|
||
inactiveUniqueSipuAddressVlan OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user vlan."
|
||
::= { inactiveUniqueSipUserAddrEntry 4 }
|
||
|
||
inactiveUniqueSipuAddressPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user priroty."
|
||
::= { inactiveUniqueSipUserAddrEntry 5 }
|
||
|
||
inactiveUniqueSipuAddressRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveUniqueSipUserAddrEntry 6 }
|
||
|
||
inactiveUniqueSipuAddressGateway OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user gateway."
|
||
::= { inactiveUniqueSipUserAddrEntry 7 }
|
||
|
||
inactiveUniqueSipuAddressMasterDns OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user master DNS."
|
||
::= { inactiveUniqueSipUserAddrEntry 8 }
|
||
|
||
inactiveUniqueSipuAddressSlaveDns OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user slave DNS."
|
||
::= { inactiveUniqueSipUserAddrEntry 9 }
|
||
|
||
inactiveUniqueSipuAddressHost OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user host."
|
||
::= { inactiveUniqueSipUserAddrEntry 10 }
|
||
|
||
inactiveUniqueSipuAddressMode OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
static(0),
|
||
dhcp(1)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user mode.
|
||
0(default): static ip mode;
|
||
1: dhcp mode."
|
||
::= { inactiveUniqueSipUserAddrEntry 11 }
|
||
|
||
-- 1.1.2.7.4. inactiveUniqueSipUserInfoTable --------------
|
||
inactiveUniqueSipUserInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniqueSipUserInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain unique voip sip user infomation table"
|
||
::= { inactiveUniqueConfig 4 }
|
||
|
||
inactiveUniqueSipUserInfoEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniqueSipUserInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of unique voip sip user infomation table"
|
||
INDEX { inactiveUniqueIndexIII, inactiveUniqueSipuInfoIndex }
|
||
::= { inactiveUniqueSipUserInfoTable 1 }
|
||
|
||
InactiveUniqueSipUserInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueIndexIII INTEGER,
|
||
inactiveUniqueSipuInfoIndex INTEGER,
|
||
inactiveUniqueSipuInfoUserName OCTET STRING,
|
||
inactiveUniqueSipuInfoPassword OCTET STRING,
|
||
inactiveUniqueSipuInfoTelephone OCTET STRING,
|
||
inactiveUniqueSipuInfoRowStatus RowStatus
|
||
}
|
||
|
||
inactiveUniqueIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of unique primary table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniqueSipUserInfoEntry 1 }
|
||
|
||
inactiveUniqueSipuInfoIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..2)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of voip sip user info, the 2nd index of this table. Should in <1-2>."
|
||
::= { inactiveUniqueSipUserInfoEntry 2 }
|
||
|
||
inactiveUniqueSipuInfoUserName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..25))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user infomation user name, max length: 25."
|
||
::= { inactiveUniqueSipUserInfoEntry 3 }
|
||
|
||
inactiveUniqueSipuInfoPassword OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..25))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user infomation user name, max length: 25."
|
||
::= { inactiveUniqueSipUserInfoEntry 4 }
|
||
|
||
inactiveUniqueSipuInfoTelephone OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..25))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user infomation user name, max length: 25."
|
||
::= { inactiveUniqueSipUserInfoEntry 5 }
|
||
|
||
inactiveUniqueSipuInfoRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveUniqueSipUserInfoEntry 6 }
|
||
|
||
-- 1.1.2.7.5. inactiveUniqueSipDigitMapTable --------------
|
||
inactiveUniqueSipDigitMapTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniqueSipDigitMapEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain unique voip sip digit map table"
|
||
::= { inactiveUniqueConfig 5 }
|
||
|
||
inactiveUniqueSipDigitMapEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniqueSipDigitMapEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive unique voip sip digit map table"
|
||
INDEX { inactiveUniqueIndexIV, inactiveUniqueSipdMapIndex }
|
||
::= { inactiveUniqueSipDigitMapTable 1 }
|
||
|
||
InactiveUniqueSipDigitMapEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueIndexIV INTEGER,
|
||
inactiveUniqueSipdMapIndex INTEGER,
|
||
inactiveUniqueSipdMapDialPlanToken OCTET STRING,
|
||
inactiveUniqueSipdMapRowStatus RowStatus
|
||
}
|
||
|
||
inactiveUniqueIndexIV OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of unique primary table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniqueSipDigitMapEntry 1 }
|
||
|
||
inactiveUniqueSipdMapIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..10)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of voip digit map, the 2nd index of this table. Should in <1-10>."
|
||
::= { inactiveUniqueSipDigitMapEntry 2 }
|
||
|
||
inactiveUniqueSipdMapDialPlanToken OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..28))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip digit map dial plan token, max length: 28."
|
||
::= { inactiveUniqueSipDigitMapEntry 3 }
|
||
|
||
inactiveUniqueSipdMapRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveUniqueSipDigitMapEntry 4 }
|
||
|
||
-- 1.1.2.7.6. inactiveUniqueGemportTable --------------------
|
||
inactiveUniqueGemportTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniqueGemportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain unique gemport table."
|
||
::= { inactiveUniqueConfig 6 }
|
||
|
||
inactiveUniqueGemportEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniqueGemportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive unique gemport table"
|
||
INDEX { inactiveUniqueIndexV, inactiveUniqueGemportIndex }
|
||
::= { inactiveUniqueGemportTable 1 }
|
||
|
||
InactiveUniqueGemportEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueIndexV INTEGER,
|
||
inactiveUniqueGemportIndex INTEGER,
|
||
inactiveUniqueGemportVlanProfileId INTEGER,
|
||
inactiveUniqueGemportUsProfileId INTEGER,
|
||
inactiveUniqueGemportDsProfileId INTEGER,
|
||
inactiveUniqueGemportRowStatus RowStatus
|
||
}
|
||
|
||
inactiveUniqueIndexV OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniqueGemportEntry 1 }
|
||
|
||
inactiveUniqueGemportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..24)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of gemport, the 2nd index of this table.
|
||
Should in <1-24>."
|
||
::= { inactiveUniqueGemportEntry 2 }
|
||
|
||
inactiveUniqueGemportVlanProfileId OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport vlan profile id, should be inputted with <0-4095>."
|
||
::= { inactiveUniqueGemportEntry 3 }
|
||
|
||
inactiveUniqueGemportUsProfileId OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport us traffic profile id, should be inputted with <0-4095>."
|
||
::= { inactiveUniqueGemportEntry 4 }
|
||
|
||
inactiveUniqueGemportDsProfileId OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport ds traffic profile id, should be inputted with <0-4095>."
|
||
::= { inactiveUniqueGemportEntry 5 }
|
||
|
||
inactiveUniqueGemportRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveUniqueGemportEntry 6 }
|
||
|
||
-- 1.1.2.7.7. inactiveUniqueCportTable --------------------
|
||
inactiveUniqueCportTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniqueCportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain unique catv port management table."
|
||
::= { inactiveUniqueConfig 7 }
|
||
|
||
inactiveUniqueCportEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniqueCportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive unique catv port management table"
|
||
INDEX { inactiveUniqueIndexVI, inactiveUniqueCportIndex }
|
||
::= { inactiveUniqueCportTable 1 }
|
||
|
||
InactiveUniqueCportEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueIndexVI INTEGER,
|
||
inactiveUniqueCportIndex INTEGER,
|
||
inactiveUniqueCportSwitch INTEGER,
|
||
inactiveUniqueCportAgcMode INTEGER,
|
||
inactiveUniqueCportAgcRange INTEGER
|
||
}
|
||
|
||
inactiveUniqueIndexVI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniqueCportEntry 1 }
|
||
|
||
inactiveUniqueCportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of catv port management, the 2nd index of this table. Should in <1-4>."
|
||
::= { inactiveUniqueCportEntry 2 }
|
||
|
||
inactiveUniqueCportSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveUniqueCportSwitch:
|
||
0 disable
|
||
1 enable(default)"
|
||
::= { inactiveUniqueCportEntry 3 }
|
||
|
||
inactiveUniqueCportAgcMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveUniqueCportAgcMode:
|
||
0 No AGC
|
||
1 Broadband RF AGC
|
||
2 Optical AGC"
|
||
::= { inactiveUniqueCportEntry 4 }
|
||
|
||
inactiveUniqueCportAgcRange OBJECT-TYPE
|
||
SYNTAX INTEGER(-120..60)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"catv port agc range, default: 0."
|
||
::= { inactiveUniqueCportEntry 5 }
|
||
|
||
-- 1.1.2.7.8. inactiveUniqueEportTable --------------------
|
||
inactiveUniqueEportTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniqueEportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain unique ethernet port management table."
|
||
::= { inactiveUniqueConfig 8 }
|
||
|
||
inactiveUniqueEportEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniqueEportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive unique ethernet port management table"
|
||
INDEX { inactiveUniqueIndexVII, inactiveUniqueEportIndex }
|
||
::= { inactiveUniqueEportTable 1 }
|
||
|
||
InactiveUniqueEportEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueIndexVII INTEGER,
|
||
inactiveUniqueEportIndex INTEGER,
|
||
inactiveUniqueEportSwitch INTEGER,
|
||
inactiveUniqueEportNegMode INTEGER
|
||
}
|
||
|
||
inactiveUniqueIndexVII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniqueEportEntry 1 }
|
||
|
||
inactiveUniqueEportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ethernet port management, the 2nd index of this table. Should in <1-8>."
|
||
::= { inactiveUniqueEportEntry 2 }
|
||
|
||
inactiveUniqueEportSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveUniqueEportSwitch:
|
||
0 enable(default)
|
||
1 disable"
|
||
::= { inactiveUniqueEportEntry 3 }
|
||
-- <20><>ʱ<EFBFBD><CAB1>δʵ<CEB4><CAB5>
|
||
|
||
inactiveUniqueEportNegMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..23)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"neg mode contains duplex and speed.
|
||
duplex: 0 auto, 1 full, 2 half
|
||
speed: 0 auto, 1 10M, 2 100M, 3 1000M
|
||
neg mode = duplex * 10 + speed.
|
||
neg mode value 0 means auto duplex auto speed,
|
||
value 11 means full duplex 10M, and so on."
|
||
-- ģʽ<C4A3><CABD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ҫͬʱ<CDAC>䣬<EFBFBD><E4A3AC><EFBFBD><EFBFBD><EFBFBD>ñȽ<C3B1><C8BD>鷳<EFBFBD><E9B7B3> rowstatus<75><73><EFBFBD><EFBFBD>һ<EFBFBD><D2BB><EFBFBD>ڵ<EFBFBD><DAB5>㶨<EFBFBD><E3B6A8><EFBFBD>ˡ<EFBFBD>
|
||
-- <20><>λ<EFBFBD><CEBB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʣ<EFBFBD>ʮλ<CAAE><CEBB><EFBFBD><EFBFBD>˫<EFBFBD><CBAB>ģʽ<C4A3><CABD><EFBFBD><EFBFBD><EFBFBD>磺ǧ<E7A3BA>װ<EFBFBD>˫<EFBFBD><CBAB><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 23
|
||
::= { inactiveUniqueEportEntry 4 }
|
||
|
||
-- 1.1.2.7.9. inactiveUniqueTcontTable ----------------------
|
||
inactiveUniqueTcontTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniqueTcontEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain unique tcont table, now only for tcont bind dba."
|
||
::= { inactiveUniqueConfig 9 }
|
||
|
||
inactiveUniqueTcontEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniqueTcontEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive unique tcont table"
|
||
INDEX { inactiveUniqueIndexVIII, inactiveUniqueTcontIndex }
|
||
::= { inactiveUniqueTcontTable 1 }
|
||
|
||
InactiveUniqueTcontEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueIndexVIII INTEGER,
|
||
inactiveUniqueTcontIndex INTEGER,
|
||
inactiveUniqueTcontDbaIndex INTEGER,
|
||
inactiveUniqueTcontRowStatus RowStatus
|
||
}
|
||
|
||
inactiveUniqueIndexVIII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The 1st index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniqueTcontEntry 1 }
|
||
|
||
inactiveUniqueTcontIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of tcont, the 2nd index of this table.
|
||
Should in <1-8>."
|
||
::= { inactiveUniqueTcontEntry 2 }
|
||
|
||
inactiveUniqueTcontDbaIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of tcont bind dba, should be inputted with <0-127>."
|
||
::= { inactiveUniqueTcontEntry 3 }
|
||
|
||
inactiveUniqueTcontRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveUniqueTcontEntry 4 }
|
||
|
||
-- 1.1.2.7.10. inactiveUniqueAlarmRefTable --------------------
|
||
inactiveUniqueAlarmRefTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniqueAlarmRefEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive unique alarm Reference table."
|
||
::= { inactiveUniqueConfig 10 }
|
||
|
||
inactiveUniqueAlarmRefEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniqueAlarmRefEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive unique alarm Reference table"
|
||
INDEX { inactiveUniqueAlarmRefUIndex }
|
||
::= { inactiveUniqueAlarmRefTable 1 }
|
||
|
||
InactiveUniqueAlarmRefEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueAlarmRefUIndex INTEGER,
|
||
inactiveUniqueAlarmRefAIndex INTEGER,
|
||
inactiveUniqueAlarmRefAName OCTET STRING,
|
||
inactiveUniqueAlarmRefRowStatus RowStatus
|
||
}
|
||
|
||
inactiveUniqueAlarmRefUIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniqueAlarmRefEntry 1 }
|
||
|
||
inactiveUniqueAlarmRefAIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of alarm table to reference, Should in <0-127>."
|
||
::= { inactiveUniqueAlarmRefEntry 2 }
|
||
|
||
inactiveUniqueAlarmRefAName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..128))
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The entry name of alarm table to reference, Should in <1-128>."
|
||
::= { inactiveUniqueAlarmRefEntry 3 }
|
||
|
||
inactiveUniqueAlarmRefRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The row status of inactive unique alarm Reference table."
|
||
::= { inactiveUniqueAlarmRefEntry 4 }
|
||
|
||
-- 1.1.2.7.11. inactiveUniqueManageTable
|
||
inactiveUniqueManageTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniqueManageEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive unique management table."
|
||
::= { inactiveUniqueConfig 11 }
|
||
|
||
inactiveUniqueManageEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniqueManageEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive unique management table"
|
||
INDEX { inactiveUniqueManageIndex }
|
||
::= { inactiveUniqueManageTable 1 }
|
||
|
||
InactiveUniqueManageEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueManageIndex INTEGER,
|
||
inactiveUniqueManageProtocolPort80 INTEGER
|
||
}
|
||
|
||
inactiveUniqueManageIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniqueManageEntry 1 }
|
||
|
||
inactiveUniqueManageProtocolPort80 OBJECT-TYPE
|
||
SYNTAX INTEGER { disable_discard(0),
|
||
disable_forward(1),
|
||
enable_discard(2),
|
||
enable_forward(3),
|
||
init(4) }
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"set protocol-port-80 disable mode discard or enable mode forward."
|
||
::= { inactiveUniqueManageEntry 2 }
|
||
|
||
-- 1.1.2.7.12. inactiveUniqueWanTable
|
||
inactiveUniqueWanTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveUniqueWanEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive unique wan table."
|
||
::= { inactiveUniqueConfig 12 }
|
||
|
||
inactiveUniqueWanEntry OBJECT-TYPE
|
||
SYNTAX InactiveUniqueWanEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive unique wan table"
|
||
INDEX { inactiveUniqueWanIndex, inactiveUniqueWanNo }
|
||
::= { inactiveUniqueWanTable 1 }
|
||
|
||
InactiveUniqueWanEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveUniqueWanIndex INTEGER,
|
||
inactiveUniqueWanNo INTEGER,
|
||
inactiveUniqueWanMode INTEGER,
|
||
inactiveUniqueWanVlan INTEGER,
|
||
inactiveUniqueWanPriority INTEGER,
|
||
inactiveUniqueWanPppoeUsername OCTET STRING,
|
||
inactiveUniqueWanPppoePassword OCTET STRING,
|
||
inactiveUniqueWanPppoeSerName OCTET STRING,
|
||
inactiveUniqueWanPppoeAuthMode INTEGER,
|
||
inactiveUniqueWanPppoeConnMode INTEGER,
|
||
inactiveUniqueWanPppoeNat INTEGER,
|
||
inactiveUniqueWanPppoeReleTime INTEGER,
|
||
inactiveUniqueWanStaticIp IpAddress,
|
||
inactiveUniqueWanStaticMask IpAddress,
|
||
inactiveUniqueWanStaticGateway IpAddress,
|
||
inactiveUniqueWanStaticMasterDns IpAddress,
|
||
inactiveUniqueWanStaticSlaveDns IpAddress,
|
||
inactiveUniqueWanRowStatus RowStatus
|
||
}
|
||
|
||
inactiveUniqueWanIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2047)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique index of this table, should be inputted with <0-2047>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveUniqueWanEntry 1 }
|
||
|
||
inactiveUniqueWanNo OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique index of this table, should be inputted with <1-4>."
|
||
::= { inactiveUniqueWanEntry 2 }
|
||
|
||
inactiveUniqueWanMode OBJECT-TYPE
|
||
SYNTAX INTEGER { pppoe(1),
|
||
dhcp(2),
|
||
static_ip(3) }
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan mode of this table, should be inputted with <1-3>."
|
||
::= { inactiveUniqueWanEntry 3 }
|
||
|
||
inactiveUniqueWanVlan OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan vlan of this table, should be inputted with <1-4094>.
|
||
0 - Initial value and cannot be set to this value.
|
||
1..4094 - Valid Settings."
|
||
::= { inactiveUniqueWanEntry 4 }
|
||
|
||
inactiveUniqueWanPriority OBJECT-TYPE
|
||
SYNTAX INTEGER(0..8)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan vlan priority of this table, should be inputted with <0-7>.
|
||
0..7 - Valid Settings.
|
||
8 - Initial value and cannot be set to this value."
|
||
::= { inactiveUniqueWanEntry 5 }
|
||
|
||
inactiveUniqueWanPppoeUsername OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..128))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan pppoe mode user name of this table.
|
||
0 - Initial len and cannot be set to this len.
|
||
1..128 - Valid Settings."
|
||
::= { inactiveUniqueWanEntry 6 }
|
||
|
||
inactiveUniqueWanPppoePassword OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..25))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan pppoe mode password of this table.
|
||
0 - Initial len and cannot be set to this len.
|
||
1..25 - Valid Settings."
|
||
::= { inactiveUniqueWanEntry 7 }
|
||
|
||
inactiveUniqueWanPppoeSerName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..128))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan pppoe mode service name of this table.
|
||
0 - Initial len and cannot be set to this len.
|
||
1..128 - Valid Settings."
|
||
::= { inactiveUniqueWanEntry 8 }
|
||
|
||
inactiveUniqueWanPppoeAuthMode OBJECT-TYPE
|
||
SYNTAX INTEGER { auto(0),
|
||
chap(1),
|
||
pap(2) }
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan pppoe mode authentication mode of this table.
|
||
0 - auto (the default)
|
||
1 - chap
|
||
2 - pap"
|
||
::= { inactiveUniqueWanEntry 9 }
|
||
|
||
inactiveUniqueWanPppoeConnMode OBJECT-TYPE
|
||
SYNTAX INTEGER { always(0),
|
||
demand(1) }
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan pppoe mode connection mode of this table.
|
||
0 - always (the default)
|
||
1 - demand"
|
||
::= { inactiveUniqueWanEntry 10 }
|
||
|
||
inactiveUniqueWanPppoeNat OBJECT-TYPE
|
||
SYNTAX INTEGER { disable(0),
|
||
enable(1) }
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan pppoe mode NAT of this table.
|
||
0 - disable
|
||
1 - enable(the default)"
|
||
::= { inactiveUniqueWanEntry 11 }
|
||
|
||
inactiveUniqueWanPppoeReleTime OBJECT-TYPE
|
||
SYNTAX INTEGER(0..65535)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan pppoe mode release time of this table, should be inputted with <1-65535>.
|
||
0 - Initial value and cannot be set to this value.
|
||
1..65535 - Valid Settings."
|
||
::= { inactiveUniqueWanEntry 12 }
|
||
|
||
inactiveUniqueWanStaticIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan static ip mode ip address of this table."
|
||
::= { inactiveUniqueWanEntry 13 }
|
||
|
||
inactiveUniqueWanStaticMask OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan static ip mode ip mask of this table."
|
||
::= { inactiveUniqueWanEntry 14 }
|
||
|
||
inactiveUniqueWanStaticGateway OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan static ip mode ip gateway of this table."
|
||
::= { inactiveUniqueWanEntry 15 }
|
||
|
||
inactiveUniqueWanStaticMasterDns OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan static ip mode master DNS of this table."
|
||
::= { inactiveUniqueWanEntry 16 }
|
||
|
||
inactiveUniqueWanStaticSlaveDns OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique wan static ip mode slave DNS of this table."
|
||
::= { inactiveUniqueWanEntry 17 }
|
||
|
||
inactiveUniqueWanRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveUniqueWanEntry 18 }
|
||
|
||
-- 1.1.2.8. inactiveCtrlMcastConfig --------------------------
|
||
inactiveCtrlMcastConfig OBJECT IDENTIFIER ::= { deployInactive 8 }
|
||
|
||
-- 1.1.2.8.1. inactiveCtrlMcastTable
|
||
-- 1.1.2.8.2. inactiveCtrlMcastOntTable
|
||
|
||
-- 1.1.2.8.1. inactiveCtrlMcastTable --------------------------
|
||
|
||
inactiveCtrlMcastTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveCtrlMcastEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive control multicast table."
|
||
::= { inactiveCtrlMcastConfig 1 }
|
||
|
||
inactiveCtrlMcastEntry OBJECT-TYPE
|
||
SYNTAX InactiveCtrlMcastEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive control muticast table"
|
||
INDEX { inactiveCtrlMcastIndex }
|
||
::= { inactiveCtrlMcastTable 1 }
|
||
|
||
InactiveCtrlMcastEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveCtrlMcastIndex INTEGER,
|
||
inactiveCtrlMcastName OCTET STRING,
|
||
inactiveCtrlMcastRowStatus RowStatus
|
||
}
|
||
|
||
inactiveCtrlMcastIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of inactive control multicast table, should be inputted with <0-127>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveCtrlMcastEntry 1 }
|
||
|
||
inactiveCtrlMcastName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"name of inactive control multicast entry."
|
||
::= { inactiveCtrlMcastEntry 2 }
|
||
|
||
inactiveCtrlMcastRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveCtrlMcastEntry 3 }
|
||
|
||
-- 1.1.2.8.2. inactiveCtrlMcastOntTable ------------------------
|
||
inactiveCtrlMcastOntTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveCtrlMcastOntEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive domain control multicast base ont table."
|
||
::= { inactiveCtrlMcastConfig 2 }
|
||
|
||
inactiveCtrlMcastOntEntry OBJECT-TYPE
|
||
SYNTAX InactiveCtrlMcastOntEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive control multicast base ont table"
|
||
INDEX { inactiveCtrlMcastIndexI, inactiveCtrlMcastEntryIndex }
|
||
::= { inactiveCtrlMcastOntTable 1 }
|
||
|
||
InactiveCtrlMcastOntEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveCtrlMcastIndexI INTEGER,
|
||
inactiveCtrlMcastEntryIndex INTEGER,
|
||
inactiveCtrlMcastAccessType INTEGER,
|
||
inactiveCtrlMcastVid INTEGER,
|
||
inactiveCtrlMcastSrcIp IpAddress,
|
||
inactiveCtrlMcastDstStartIp IpAddress,
|
||
inactiveCtrlMcastDstEndIp IpAddress,
|
||
inactiveCtrlMcastGroupBw INTEGER,
|
||
inactiveCtrlMcastDurationTimes INTEGER,
|
||
inactiveCtrlMcastNumOfTimes INTEGER,
|
||
inactiveCtrlMcastTimeInterval INTEGER,
|
||
inactiveCtrlMcastResetTime INTEGER,
|
||
inactiveCtrlMcastNport INTEGER,
|
||
inactiveCtrlMcastOntRowStatus RowStatus
|
||
}
|
||
|
||
inactiveCtrlMcastIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of control multicast profile. Should in <0-127>."
|
||
::= { inactiveCtrlMcastOntEntry 1 }
|
||
|
||
inactiveCtrlMcastEntryIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..31)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of control multicast entry, the 2nd index of this table. Should in <0-31>."
|
||
::= { inactiveCtrlMcastOntEntry 2 }
|
||
|
||
inactiveCtrlMcastAccessType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactiveCtrlMcastAccessType:
|
||
0 del one entry
|
||
1 clear all entry
|
||
2 add permit entry
|
||
3 add preview entry"
|
||
::= { inactiveCtrlMcastOntEntry 3 }
|
||
|
||
inactiveCtrlMcastVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"control multicast vlan id, should be <1-4094>."
|
||
::= { inactiveCtrlMcastOntEntry 4 }
|
||
|
||
inactiveCtrlMcastSrcIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"control multicast source ip address."
|
||
::= { inactiveCtrlMcastOntEntry 5 }
|
||
|
||
inactiveCtrlMcastDstStartIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"control multicast destination start ip address."
|
||
::= { inactiveCtrlMcastOntEntry 6 }
|
||
|
||
inactiveCtrlMcastDstEndIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"control multicast destination end ip address."
|
||
::= { inactiveCtrlMcastOntEntry 7 }
|
||
|
||
inactiveCtrlMcastGroupBw OBJECT-TYPE
|
||
SYNTAX INTEGER(1..1024000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"control multicast group bandwidth, should be <1-1024000>."
|
||
::= { inactiveCtrlMcastOntEntry 8 }
|
||
|
||
inactiveCtrlMcastDurationTimes OBJECT-TYPE
|
||
SYNTAX INTEGER(10..6000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"control multicast duration times, should be <10-6000>."
|
||
::= { inactiveCtrlMcastOntEntry 9 }
|
||
|
||
inactiveCtrlMcastNumOfTimes OBJECT-TYPE
|
||
SYNTAX INTEGER(1..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"control multicast number of times, should be <1-255>."
|
||
::= { inactiveCtrlMcastOntEntry 10 }
|
||
|
||
inactiveCtrlMcastTimeInterval OBJECT-TYPE
|
||
SYNTAX INTEGER(1..7200)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"control multicast time interval, should be <1-7200>."
|
||
::= { inactiveCtrlMcastOntEntry 11 }
|
||
|
||
inactiveCtrlMcastResetTime OBJECT-TYPE
|
||
SYNTAX INTEGER(1..24)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"control multicast reset time o'clock, should be <1-24>."
|
||
::= { inactiveCtrlMcastOntEntry 12 }
|
||
|
||
inactiveCtrlMcastNport OBJECT-TYPE
|
||
SYNTAX INTEGER(1..25)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ethernet port number 1-24 of the entry assigned, default 25 means ctrl mcast base ont."
|
||
::= { inactiveCtrlMcastOntEntry 13 }
|
||
|
||
inactiveCtrlMcastOntRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { inactiveCtrlMcastOntEntry 14 }
|
||
|
||
|
||
-- 1.1.2.9. inactiveCtrlAlarmConfig --------------------------
|
||
inactiveCtrlAlarmConfig OBJECT IDENTIFIER ::= { deployInactive 9 }
|
||
|
||
-- 1.1.2.9.1. inactiveCtrlAlarmTable
|
||
-- 1.1.2.9.2. inactiveCtrlAlarmThrldTable
|
||
|
||
-- 1.1.2.9.1. inactiveCtrlAlarmTable --------------------------
|
||
inactiveCtrlAlarmTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveCtrlAlarmEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive control alarm table."
|
||
::= { inactiveCtrlAlarmConfig 1 }
|
||
|
||
inactiveCtrlAlarmEntry OBJECT-TYPE
|
||
SYNTAX InactiveCtrlAlarmEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive control alarm table"
|
||
INDEX { inactiveCtrlAlarmAimIndex }
|
||
::= { inactiveCtrlAlarmTable 1 }
|
||
|
||
InactiveCtrlAlarmEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveCtrlAlarmAimIndex INTEGER,
|
||
inactiveCtrlAlarmAimName OCTET STRING,
|
||
inactiveCtrlAlarmReferLine OCTET STRING,
|
||
inactiveCtrlAlarmReferUnique OCTET STRING,
|
||
inactiveCtrlAlarmRowStatus RowStatus
|
||
}
|
||
|
||
inactiveCtrlAlarmAimIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of inactive control alarm table, should be <0-127>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveCtrlAlarmEntry 1 }
|
||
|
||
inactiveCtrlAlarmAimName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..128))
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"the name of aim."
|
||
::= { inactiveCtrlAlarmEntry 2 }
|
||
|
||
inactiveCtrlAlarmReferLine OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Line bitmap, each line references this aim."
|
||
::= { inactiveCtrlAlarmEntry 3 }
|
||
|
||
inactiveCtrlAlarmReferUnique OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Unique bitmap, each unique references this aim."
|
||
::= { inactiveCtrlAlarmEntry 4 }
|
||
|
||
inactiveCtrlAlarmRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The inactive control alarm table rowStatus."
|
||
::= { inactiveCtrlAlarmEntry 5 }
|
||
|
||
|
||
-- 1.1.2.9.2. inactiveCtrlAlarmThrldTable --------------------------
|
||
inactiveCtrlAlarmThrldTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF InactiveCtrlAlarmThrldEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"inactive control alarm threshold table."
|
||
::= { inactiveCtrlAlarmConfig 2 }
|
||
|
||
inactiveCtrlAlarmThrldEntry OBJECT-TYPE
|
||
SYNTAX InactiveCtrlAlarmThrldEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of inactive control alarm threshold table"
|
||
INDEX { inactiveCtrlAlarmThrldAimIndex, inactiveCtrlAlarmThrldRxOrTx}
|
||
::= { inactiveCtrlAlarmThrldTable 1 }
|
||
|
||
InactiveCtrlAlarmThrldEntry ::=
|
||
SEQUENCE
|
||
{
|
||
inactiveCtrlAlarmThrldAimIndex INTEGER,
|
||
inactiveCtrlAlarmThrldRxOrTx INTEGER,
|
||
inactiveCtrlAlarmThrldHigh INTEGER,
|
||
inactiveCtrlAlarmThrldLow INTEGER
|
||
}
|
||
|
||
inactiveCtrlAlarmThrldAimIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of inactive control alarm threshold table, should be <0-127>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { inactiveCtrlAlarmThrldEntry 1 }
|
||
|
||
inactiveCtrlAlarmThrldRxOrTx OBJECT-TYPE
|
||
SYNTAX INTEGER { none(0), rx(1), tx(2) }
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The secend index of inactive control alarm threshold entry."
|
||
::= { inactiveCtrlAlarmThrldEntry 2 }
|
||
|
||
inactiveCtrlAlarmThrldHigh OBJECT-TYPE
|
||
SYNTAX INTEGER(0..254)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The high threshold of rx or tx alarm, The actual value is half the input value,
|
||
if the threshold is rx, the actual value is the opposite."
|
||
::= { inactiveCtrlAlarmThrldEntry 3 }
|
||
|
||
inactiveCtrlAlarmThrldLow OBJECT-TYPE
|
||
SYNTAX INTEGER(0..254)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The low threshold of rx or tx alarm, The actual value is half the input value,
|
||
if the threshold is rx, the actual value is the opposite."
|
||
::= { inactiveCtrlAlarmThrldEntry 4 }
|
||
|
||
|
||
-- 1.1.3. deployActive ----------------------------------
|
||
deployActive OBJECT IDENTIFIER ::= { configDevice 3 }
|
||
|
||
-- 1.1.3.1. activeAuthTable
|
||
-- 1.1.3.2. activeDbaTable
|
||
-- 1.1.3.3. activeLineCommonConfig
|
||
-- 1.1.3.4. activeLineSFUConfig
|
||
-- 1.1.3.5. activeLineHGUConfig
|
||
-- 1.1.3.6. activeRuleTable
|
||
-- 1.1.3.7. activeUniqueConfig
|
||
|
||
-- 1.1.3.1. activeAuthTable ------------------------------
|
||
activeAuthTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveAuthEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain auth table"
|
||
::= { deployActive 1 }
|
||
|
||
activeAuthEntry OBJECT-TYPE
|
||
SYNTAX ActiveAuthEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active auth table"
|
||
INDEX { activeAuthIndex }
|
||
::= { activeAuthTable 1 }
|
||
|
||
ActiveAuthEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeAuthIndex INTEGER,
|
||
activeAuthDescription OCTET STRING,
|
||
activeAuthMode INTEGER,
|
||
activeAuthSn OCTET STRING,
|
||
activeAuthPw OCTET STRING,
|
||
activeAuthLoid OCTET STRING,
|
||
activeAuthLopw OCTET STRING,
|
||
activeAuthAssignedSlot OCTET STRING,
|
||
activeAuthAssignedPport OCTET STRING,
|
||
activeAuthAssignedOnt OCTET STRING
|
||
}
|
||
|
||
activeAuthIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of active auth table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeAuthEntry 1 }
|
||
|
||
activeAuthDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth description, max length: 128."
|
||
::= { activeAuthEntry 2 }
|
||
|
||
activeAuthMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeAuthMode:
|
||
0 auth mode sn
|
||
1 auth mode pw
|
||
2 auth mode sn_pw
|
||
3 auth mode loid
|
||
4 auth mode lopw
|
||
5 auth mode loid_lopw"
|
||
::= { activeAuthEntry 3 }
|
||
|
||
activeAuthSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth sn, string-hex, max length: 16."
|
||
::= { activeAuthEntry 4 }
|
||
|
||
activeAuthPw OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth password, string, max length: 20."
|
||
::= { activeAuthEntry 5 }
|
||
|
||
activeAuthLoid OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth loid, max length: 24."
|
||
::= { activeAuthEntry 6 }
|
||
|
||
activeAuthLopw OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth logic password, max length: 12."
|
||
::= { activeAuthEntry 7 }
|
||
|
||
activeAuthAssignedSlot OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slot id pre assigned. if not configed, its '-'."
|
||
::= { activeAuthEntry 8 }
|
||
|
||
activeAuthAssignedPport OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pon port id pre assigned. if not configed, its '-'."
|
||
::= { activeAuthEntry 9 }
|
||
|
||
activeAuthAssignedOnt OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont id pre assigned. if not configed, its '-'."
|
||
::= { activeAuthEntry 10 }
|
||
|
||
-- 1.1.3.2. activeDbaTable ------------------------------
|
||
activeDbaTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveDbaEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain dba table"
|
||
::= { deployActive 2 }
|
||
|
||
activeDbaEntry OBJECT-TYPE
|
||
SYNTAX ActiveDbaEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active dba table"
|
||
INDEX { activeDbaIndex }
|
||
::= { activeDbaTable 1 }
|
||
|
||
ActiveDbaEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeDbaIndex INTEGER,
|
||
activeDbaDescription OCTET STRING,
|
||
activeDbaType INTEGER,
|
||
activeDbaFixBandwidth INTEGER,
|
||
activeDbaAssuredBandwidth INTEGER,
|
||
activeDbaMaxBandwidth INTEGER
|
||
}
|
||
|
||
activeDbaIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of active dba table, should be inputted with <0-127>."
|
||
::= { activeDbaEntry 1 }
|
||
|
||
activeDbaDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active dba description, max length: 128."
|
||
::= { activeDbaEntry 2 }
|
||
|
||
activeDbaType OBJECT-TYPE
|
||
SYNTAX INTEGER(1..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeDbaType,
|
||
1 fixed bandwidth
|
||
2 assured bandwidth
|
||
3 assured and max bandwidth
|
||
4 max bandwidth
|
||
5 fixed and assured and max bandwidth"
|
||
::= { activeDbaEntry 3 }
|
||
|
||
activeDbaFixBandwidth OBJECT-TYPE
|
||
SYNTAX INTEGER(128..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Must to be divisible by 64kbps, must not less than 128 kbps."
|
||
::= { activeDbaEntry 4 }
|
||
|
||
activeDbaAssuredBandwidth OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1310592)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Must to be divisible by 64kbps, Can be 0.
|
||
If not 0, it must be at least 256 kbps."
|
||
::= { activeDbaEntry 5 }
|
||
|
||
activeDbaMaxBandwidth OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Must to be divisible by 64kbps, and must not be less than
|
||
the sum of assured BW plus fixedBW.
|
||
Must less than 1310720 kbps"
|
||
::= { activeDbaEntry 6 }
|
||
|
||
-- 1.1.3.3. activeLineCommonConfig ----------------------
|
||
activeLineCommonConfig OBJECT IDENTIFIER ::= { deployActive 3 }
|
||
|
||
-- 1.1.3.3.1. activeLinePrimaryTable
|
||
-- 1.1.3.3.2. activeLineTcontTable
|
||
-- 1.1.3.3.3. activeLineGemportTable
|
||
-- 1.1.3.3.4. activeLineFlowmappingTable
|
||
-- 1.1.3.3.5. activeLineAttrMgmtTable
|
||
|
||
-- 1.1.3.3.1. activeLinePrimaryTable --------------------
|
||
activeLinePrimaryTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveLinePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain line primary table"
|
||
::= { activeLineCommonConfig 1 }
|
||
|
||
activeLinePrimaryEntry OBJECT-TYPE
|
||
SYNTAX ActiveLinePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active line primary table"
|
||
INDEX { activeLineIndex }
|
||
::= { activeLinePrimaryTable 1 }
|
||
|
||
ActiveLinePrimaryEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeLineIndex INTEGER,
|
||
activeLineDeviceType OCTET STRING,
|
||
activeLineDescription OCTET STRING,
|
||
activeLineTrafficMode INTEGER,
|
||
activeLineMappingMode INTEGER
|
||
}
|
||
|
||
activeLineIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeLinePrimaryEntry 1 }
|
||
|
||
activeLineDeviceType OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(7..7))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineDeviceType:
|
||
c30-214 2ETH(1ETH+1iTV)+1POTS SFU
|
||
c30-400 4ETH SFU
|
||
c30-401 4ETH+WIFI HGU
|
||
c30-420 4ETH+2POTS SFU
|
||
c30-423 4ETH+2POTS+WIFI+USB HGU
|
||
c31-423 4ETH+2POTS+WIFI+USB HGU+SFU
|
||
c40-100 1ETH SFU
|
||
c40-201 2ETH+WIFI HGU
|
||
c40-210 1GE+1FE+1POTS HGU
|
||
c40-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU
|
||
d10-423 4ETH+2POTS+WIFI+USB HGU
|
||
f10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU
|
||
h60-100 1ETH SFU
|
||
l30-100 1ETH SFU
|
||
l30-210 2ETH+1POTS SFU
|
||
m50-420 4ETH+2POTS SFU
|
||
n20-100 1ETH SFU
|
||
n20-400 4ETH SFU
|
||
n40-100 1ETH SFU
|
||
s10-214 2ETH(1ETH+1iTV)+1POTS HGU
|
||
s30-100 1ETH SFU
|
||
t10-100 1ETH SFU
|
||
t10-214 2ETH(1ETH+1iTV)+1POTS SFU
|
||
t10-403 4ETH+WIFI+USB HGU
|
||
t10-420 4ETH+2POTS SFU
|
||
t10-423 4ETH+2POTS+WIFI+USB HGU
|
||
t10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU
|
||
t60-100 1ETH SFU"
|
||
::= { activeLinePrimaryEntry 2 }
|
||
|
||
activeLineDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"line description, max length: 128."
|
||
::= { activeLinePrimaryEntry 3 }
|
||
|
||
activeLineTrafficMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineTrafficMode:
|
||
0 pri-queue: priority queue scheduling
|
||
1 gem-car: GEM traffic control"
|
||
::= { activeLinePrimaryEntry 4 }
|
||
|
||
activeLineMappingMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..6)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineMappingMode:
|
||
0 vlan
|
||
1 priority
|
||
2 vlan-priority
|
||
3 port
|
||
4 port-vlan
|
||
5 port-priority
|
||
6 port-vlan-priority"
|
||
::= { activeLinePrimaryEntry 5 }
|
||
|
||
-- 1.1.3.3.2. activeLineTcontTable ----------------------
|
||
activeLineTcontTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveLineTcontEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain line tcont table, now only for tcont bind dba."
|
||
::= { activeLineCommonConfig 2 }
|
||
|
||
activeLineTcontEntry OBJECT-TYPE
|
||
SYNTAX ActiveLineTcontEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active line tcont table"
|
||
INDEX { activeLineIndexI, activeLineTcontIndex }
|
||
::= { activeLineTcontTable 1 }
|
||
|
||
ActiveLineTcontEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeLineIndexI INTEGER,
|
||
activeLineTcontIndex INTEGER,
|
||
activeLineTcontDbaIndex INTEGER
|
||
}
|
||
|
||
activeLineIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeLineTcontEntry 1 }
|
||
|
||
activeLineTcontIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of tcont, the 2nd index of this table.
|
||
Should in <1-8>."
|
||
::= { activeLineTcontEntry 2 }
|
||
|
||
activeLineTcontDbaIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of tcont bind dba, should be inputted with <0-127>."
|
||
::= { activeLineTcontEntry 3 }
|
||
|
||
-- 1.1.3.3.3. activeLineGemportTable --------------------
|
||
activeLineGemportTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveLineGemportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain line gemport table."
|
||
::= { activeLineCommonConfig 3 }
|
||
|
||
activeLineGemportEntry OBJECT-TYPE
|
||
SYNTAX ActiveLineGemportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active line gemport table"
|
||
INDEX { activeLineIndexII, activeLineGemportIndex }
|
||
::= { activeLineGemportTable 1 }
|
||
|
||
ActiveLineGemportEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeLineIndexII INTEGER,
|
||
activeLineGemportIndex INTEGER,
|
||
activeLineGemportVpStagged INTEGER,
|
||
activeLineGemportSvid INTEGER,
|
||
activeLineGemportPriority INTEGER,
|
||
activeLineGemportTcontId INTEGER,
|
||
activeLineGemportPq INTEGER,
|
||
activeLineGemportCir INTEGER,
|
||
activeLineGemportPir INTEGER,
|
||
activeLineGemportCbs INTEGER,
|
||
activeLineGemportPbs INTEGER
|
||
}
|
||
|
||
activeLineIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeLineGemportEntry 1 }
|
||
|
||
activeLineGemportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..24)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of gemport, the 2nd index of this table.
|
||
Should in <1-24>."
|
||
::= { activeLineGemportEntry 2 }
|
||
|
||
activeLineGemportVpStagged OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineGemportVpStagged:
|
||
0 false
|
||
1 true"
|
||
::= { activeLineGemportEntry 3 }
|
||
|
||
activeLineGemportSvid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport service vlan index, should be inputted with <1-4094>."
|
||
::= { activeLineGemportEntry 4 }
|
||
|
||
activeLineGemportPriority OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport priority, should be inputted with <0-7>. Now not use."
|
||
::= { activeLineGemportEntry 5 }
|
||
|
||
activeLineGemportTcontId OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport bind tcont index, should be inputted with <1-8>."
|
||
::= { activeLineGemportEntry 6 }
|
||
|
||
activeLineGemportPq OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport priority queue, should be inputted with <0-7>."
|
||
::= { activeLineGemportEntry 7 }
|
||
|
||
activeLineGemportCir OBJECT-TYPE
|
||
SYNTAX INTEGER(64..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport committed infomation rate, should be inputted with <64-10240000>.
|
||
must to be divisible by 64kbps,must not less than 64 kbps."
|
||
::= { activeLineGemportEntry 8 }
|
||
|
||
activeLineGemportPir OBJECT-TYPE
|
||
SYNTAX INTEGER(64..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport peek infomation rate, should be inputted with <64-10240000>.
|
||
must to be divisible by 64kbps,must not less than 64 kbps."
|
||
::= { activeLineGemportEntry 9 }
|
||
|
||
activeLineGemportCbs OBJECT-TYPE
|
||
SYNTAX INTEGER(2000..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport committed burst size, should be inputted with <2000-10240000>."
|
||
::= { activeLineGemportEntry 10 }
|
||
|
||
activeLineGemportPbs OBJECT-TYPE
|
||
SYNTAX INTEGER(2000..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport peek burst size, should be inputted with <2000-10240000>."
|
||
::= { activeLineGemportEntry 11 }
|
||
|
||
-- 1.1.3.3.4. activeLineFlowmappingTable ----------------
|
||
activeLineFlowmappingTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveLineFlowmappingEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain line flow mapping table."
|
||
::= { activeLineCommonConfig 4 }
|
||
|
||
activeLineFlowmappingEntry OBJECT-TYPE
|
||
SYNTAX ActiveLineFlowmappingEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active line flow mapping table"
|
||
INDEX { activeLineIndexIII, activeLineFlowmappingIndex }
|
||
::= { activeLineFlowmappingTable 1 }
|
||
|
||
ActiveLineFlowmappingEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeLineIndexIII INTEGER,
|
||
activeLineFlowmappingIndex INTEGER,
|
||
activeLineFlowmappingVid INTEGER,
|
||
activeLineFlowmappingPriority INTEGER,
|
||
activeLineFlowmappingEthport INTEGER,
|
||
activeLineFlowmappingGemport INTEGER,
|
||
activeLineFlowmappingType INTEGER
|
||
}
|
||
|
||
activeLineIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeLineFlowmappingEntry 1 }
|
||
|
||
activeLineFlowmappingIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..48)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of flowmapping, the 2nd index of this table. Should in <1-48>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeLineFlowmappingEntry 2 }
|
||
|
||
activeLineFlowmappingVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping vid, should be inputted with <1-4094>."
|
||
::= { activeLineFlowmappingEntry 3 }
|
||
|
||
activeLineFlowmappingPriority OBJECT-TYPE
|
||
SYNTAX INTEGER(0..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping priority, should be inputted with <0-8>.
|
||
Value 8 means don't care 802.1p priority."
|
||
::= { activeLineFlowmappingEntry 4 }
|
||
|
||
activeLineFlowmappingEthport OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping ethernet port id, should be inputted with <1-8>."
|
||
::= { activeLineFlowmappingEntry 5 }
|
||
|
||
activeLineFlowmappingGemport OBJECT-TYPE
|
||
SYNTAX INTEGER(1..24)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping gem port id, should be inputted with <1-24>."
|
||
::= { activeLineFlowmappingEntry 6 }
|
||
|
||
activeLineFlowmappingType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineFlowmappingType:
|
||
0 flowmapping not base port.
|
||
1 flowmapping base eth port.
|
||
2 flowmapping base veip port.
|
||
3. flowmapping base iphost port."
|
||
::= { activeLineFlowmappingEntry 7 }
|
||
|
||
-- 1.1.3.3.5. activeLineAttrMgmtTable --------------------
|
||
activeLineAttrMgmtTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveLineAttrMgmtEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain line attribute management table."
|
||
::= { activeLineCommonConfig 5 }
|
||
|
||
activeLineAttrMgmtEntry OBJECT-TYPE
|
||
SYNTAX ActiveLineAttrMgmtEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active line attribute management table"
|
||
INDEX { activeLineIndexIV, activeLineAttrMgmtIndex }
|
||
::= { activeLineAttrMgmtTable 1 }
|
||
|
||
ActiveLineAttrMgmtEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeLineIndexIV INTEGER,
|
||
activeLineAttrMgmtIndex INTEGER,
|
||
activeLineAttrMgmtNportType INTEGER,
|
||
activeLineAttrMgmtNport INTEGER,
|
||
activeLineAttrMgmtEtypeFilter INTEGER,
|
||
activeLineAttrMgmtVlanMode INTEGER,
|
||
activeLineAttrMgmtCvlanVid INTEGER,
|
||
activeLineAttrMgmtCvlanPri INTEGER,
|
||
activeLineAttrMgmtSvlanVid INTEGER,
|
||
activeLineAttrMgmtSvlanPri INTEGER
|
||
}
|
||
|
||
activeLineIndexIV OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeLineAttrMgmtEntry 1 }
|
||
|
||
activeLineAttrMgmtIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..64)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of attribute management, the 2nd index of this table. Should in <1-64>."
|
||
::= { activeLineAttrMgmtEntry 2 }
|
||
|
||
activeLineAttrMgmtNportType OBJECT-TYPE
|
||
SYNTAX INTEGER(1..3)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineAttrMgmtNportType:
|
||
1 eth port in sfu
|
||
2 veip port in hgu
|
||
3 iphost virtual port, for voip, tdm, etc."
|
||
::= { activeLineAttrMgmtEntry 3 }
|
||
|
||
activeLineAttrMgmtNport OBJECT-TYPE
|
||
SYNTAX INTEGER(1..64)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The port of attribute management, if eport, should in <1-8>."
|
||
::= { activeLineAttrMgmtEntry 4 }
|
||
|
||
activeLineAttrMgmtEtypeFilter OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineAttrMgmtEtypeFilter:
|
||
0 no filter
|
||
1 filter ipoe frame
|
||
2 filter pppoe frame
|
||
3 filter arp frame"
|
||
::= { activeLineAttrMgmtEntry 5 }
|
||
|
||
activeLineAttrMgmtVlanMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineAttrMgmtVlanMode:
|
||
0 transparent
|
||
1 tag
|
||
2 translation
|
||
3 trunk
|
||
4 QinQ"
|
||
::= { activeLineAttrMgmtEntry 6 }
|
||
|
||
activeLineAttrMgmtCvlanVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"cvlan vid, should be inputted with <1-4094>."
|
||
::= { activeLineAttrMgmtEntry 7 }
|
||
|
||
activeLineAttrMgmtCvlanPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The cvlan priority, should be inputted with <0-8>.
|
||
Value 8 means don't care vlan priority."
|
||
::= { activeLineAttrMgmtEntry 8 }
|
||
|
||
activeLineAttrMgmtSvlanVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"svlan vid, should be inputted with <1-4094>."
|
||
::= { activeLineAttrMgmtEntry 9 }
|
||
|
||
activeLineAttrMgmtSvlanPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"svlan priority, should be inputted with <0-8>.
|
||
Value 8 means don't care vlan priority."
|
||
::= { activeLineAttrMgmtEntry 10 }
|
||
|
||
-- 1.1.3.4. activeLineSFUConfig --------------------------
|
||
activeLineSFUConfig OBJECT IDENTIFIER ::= { deployActive 4 }
|
||
|
||
-- 1.1.3.4.1. activeLineSFUTable
|
||
-- 1.1.3.4.2. activeLineSFUEthportTable
|
||
-- 1.1.3.4.3. activeLineSFUCtrlMcastTable
|
||
|
||
-- 1.1.3.4.1. activeLineSFUTable ------------------------
|
||
activeLineSFUTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveLineSFUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain line SFU primary table."
|
||
::= { activeLineSFUConfig 1 }
|
||
|
||
activeLineSFUEntry OBJECT-TYPE
|
||
SYNTAX ActiveLineSFUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active line sfu primary table"
|
||
INDEX { activeLineIndexV }
|
||
::= { activeLineSFUTable 1 }
|
||
|
||
ActiveLineSFUEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeLineIndexV INTEGER,
|
||
activeLineSfuLocalSwitch INTEGER,
|
||
activeLineSfuLoopDetectSwitch INTEGER
|
||
}
|
||
|
||
activeLineIndexV OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeLineSFUEntry 1 }
|
||
|
||
activeLineSfuLocalSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineSfuLocalSwitch:
|
||
0 disable(default)
|
||
1 enable."
|
||
::= { activeLineSFUEntry 2 }
|
||
|
||
activeLineSfuLoopDetectSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineSfuLoopDetectSwitch:
|
||
0 disable(default)
|
||
1 enable."
|
||
::= { activeLineSFUEntry 3 }
|
||
|
||
-- 1.1.3.4.2. activeLineSFUEthportTable ------------------
|
||
activeLineSFUEthportTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveLineSFUEthportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain line SFU ethernet port table."
|
||
::= { activeLineSFUConfig 2 }
|
||
|
||
activeLineSFUEthportEntry OBJECT-TYPE
|
||
SYNTAX ActiveLineSFUEthportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active line SFU ethernet port table"
|
||
INDEX { activeLineIndexVI, activeLineSfuEthportIndex }
|
||
::= { activeLineSFUEthportTable 1 }
|
||
|
||
ActiveLineSFUEthportEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeLineIndexVI INTEGER,
|
||
activeLineSfuEthportIndex INTEGER,
|
||
activeLineSfuEthportSwitch INTEGER,
|
||
activeLineSfuEthportFlowCtrlSwitch INTEGER,
|
||
activeLineSfuEthportLoopbackSwitch INTEGER,
|
||
activeLineSfuEthportFastLeaveSwitch INTEGER,
|
||
activeLineSfuEthportMaxGroups INTEGER,
|
||
activeLineSfuEthportMaxMacCount INTEGER,
|
||
activeLineSfuEthportMcastMode INTEGER,
|
||
activeLineSfuEthportDsIgmpControlType INTEGER,
|
||
activeLineSfuEthportDsIgmpVid INTEGER,
|
||
activeLineSfuEthportDsIgmpPri INTEGER,
|
||
activeLineSfuEthportUsIgmpControlType INTEGER,
|
||
activeLineSfuEthportUsIgmpVid INTEGER,
|
||
activeLineSfuEthportUsIgmpPri INTEGER,
|
||
activeLineSfuEthportBwCir INTEGER,
|
||
activeLineSfuEthportBwCbs INTEGER,
|
||
activeLineSfuEthportBwPir INTEGER,
|
||
activeLineSfuEthportBwPbs INTEGER
|
||
}
|
||
|
||
activeLineIndexVI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeLineSFUEthportEntry 1 }
|
||
|
||
activeLineSfuEthportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>."
|
||
::= { activeLineSFUEthportEntry 2 }
|
||
|
||
activeLineSfuEthportSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineSfuEthportSwitch:
|
||
0 no shutdown(default)
|
||
1 shutdown"
|
||
::= { activeLineSFUEthportEntry 3 }
|
||
|
||
activeLineSfuEthportFlowCtrlSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineSfuEthportFlowCtrlSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { activeLineSFUEthportEntry 4 }
|
||
|
||
activeLineSfuEthportLoopbackSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineSfuEthportLoopbackSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { activeLineSFUEthportEntry 5 }
|
||
|
||
activeLineSfuEthportFastLeaveSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineSfuEthportFastLeaveSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { activeLineSFUEthportEntry 6 }
|
||
|
||
activeLineSfuEthportMaxGroups OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port max igmp groups, should be inputted with <1-128>."
|
||
::= { activeLineSFUEthportEntry 7 }
|
||
|
||
activeLineSfuEthportMaxMacCount OBJECT-TYPE
|
||
SYNTAX INTEGER(1..255)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port max mac address count, should be inputted with <1-255>."
|
||
::= { activeLineSFUEthportEntry 8 }
|
||
|
||
activeLineSfuEthportMcastMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineSfuEthportMcastMode(some ont not support):
|
||
0 unconcern(default)
|
||
1 control
|
||
2 igmp snooping"
|
||
::= { activeLineSFUEthportEntry 9 }
|
||
|
||
activeLineSfuEthportDsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineSfuEthportDsIgmpControlType:
|
||
0 transparent(default)
|
||
1 strip outer tag
|
||
2 add tag
|
||
3 replace tag
|
||
4 replace only vid
|
||
5 add only vid"
|
||
::= { activeLineSFUEthportEntry 10 }
|
||
|
||
activeLineSfuEthportDsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port downstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { activeLineSFUEthportEntry 11 }
|
||
|
||
activeLineSfuEthportDsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { activeLineSFUEthportEntry 12 }
|
||
|
||
activeLineSfuEthportUsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineSfuEthportUsIgmpControlType:
|
||
0 transparent(default, only for read)
|
||
1 add tag
|
||
2 replace tag
|
||
3 replace only vid
|
||
4 add only vid"
|
||
::= { activeLineSFUEthportEntry 13 }
|
||
|
||
activeLineSfuEthportUsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port upstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { activeLineSFUEthportEntry 14 }
|
||
|
||
activeLineSfuEthportUsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { activeLineSFUEthportEntry 15 }
|
||
|
||
activeLineSfuEthportBwCir OBJECT-TYPE
|
||
SYNTAX INTEGER(64..1024000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port bandwidth egress cir, should be inputted with <64-1024000>."
|
||
::= { activeLineSFUEthportEntry 16 }
|
||
|
||
activeLineSfuEthportBwCbs OBJECT-TYPE
|
||
SYNTAX INTEGER(2..32000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port bandwidth egress cbs, should be inputted with <2-32000>."
|
||
::= { activeLineSFUEthportEntry 17 }
|
||
|
||
activeLineSfuEthportBwPir OBJECT-TYPE
|
||
SYNTAX INTEGER(64..1024000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port bandwidth egress pir, should be inputted with <64-1024000>."
|
||
::= { activeLineSFUEthportEntry 18 }
|
||
|
||
activeLineSfuEthportBwPbs OBJECT-TYPE
|
||
SYNTAX INTEGER(2..32000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port bandwidth egress pbs, should be inputted with <2-32000>."
|
||
::= { activeLineSFUEthportEntry 19 }
|
||
|
||
-- 1.1.3.4.3. activeLineSFUCtrlMcastTable ----------------
|
||
activeLineSFUCtrlMcastTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveLineSFUCtrlMcastEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain line SFU ethernet port control multicast table."
|
||
::= { activeLineSFUConfig 3 }
|
||
|
||
activeLineSFUCtrlMcastEntry OBJECT-TYPE
|
||
SYNTAX ActiveLineSFUCtrlMcastEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active line SFU ethernet port control multicast table"
|
||
INDEX { activeLineIndexVII, activeLineSfuEthportIndexI, activeLineSfuCtrlMcastIndex }
|
||
::= { activeLineSFUCtrlMcastTable 1 }
|
||
|
||
ActiveLineSFUCtrlMcastEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeLineIndexVII INTEGER,
|
||
activeLineSfuEthportIndexI INTEGER,
|
||
activeLineSfuCtrlMcastIndex INTEGER,
|
||
activeLineSfuCtrlMcastAccessType INTEGER,
|
||
activeLineSfuCtrlMcastVid INTEGER,
|
||
activeLineSfuCtrlMcastSrcIp IpAddress,
|
||
activeLineSfuCtrlMcastDstStartIp IpAddress,
|
||
activeLineSfuCtrlMcastDstEndIp IpAddress,
|
||
activeLineSfuCtrlMcastGroupBw INTEGER,
|
||
activeLineSfuCtrlMcastDurationTimes INTEGER,
|
||
activeLineSfuCtrlMcastNumOfTimes INTEGER,
|
||
activeLineSfuCtrlMcastTimeInterval INTEGER,
|
||
activeLineSfuCtrlMcastResetTime INTEGER
|
||
}
|
||
|
||
activeLineIndexVII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeLineSFUCtrlMcastEntry 1 }
|
||
|
||
activeLineSfuEthportIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>."
|
||
::= { activeLineSFUCtrlMcastEntry 2 }
|
||
|
||
activeLineSfuCtrlMcastIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..31)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of SFU ethernet port control multicast, the 3rd index of this table. Should in <0-31>."
|
||
::= { activeLineSFUCtrlMcastEntry 3 }
|
||
|
||
activeLineSfuCtrlMcastAccessType OBJECT-TYPE
|
||
SYNTAX INTEGER(2..3)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineSfuCtrlMcastAccessType:
|
||
0 del one entry -- no use
|
||
1 clear all entry -- no use
|
||
2 add permit entry
|
||
3 add preview entry"
|
||
::= { activeLineSFUCtrlMcastEntry 4 }
|
||
|
||
activeLineSfuCtrlMcastVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast vlan id, should be <1-4094>."
|
||
::= { activeLineSFUCtrlMcastEntry 5 }
|
||
|
||
activeLineSfuCtrlMcastSrcIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast source ip address."
|
||
::= { activeLineSFUCtrlMcastEntry 6 }
|
||
|
||
activeLineSfuCtrlMcastDstStartIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast destination start ip address. 224.0.1.0-239.255.255.255"
|
||
::= { activeLineSFUCtrlMcastEntry 7 }
|
||
|
||
activeLineSfuCtrlMcastDstEndIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast destination end ip address. 224.0.1.0-239.255.255.255,
|
||
must not smaller than the start ip address. "
|
||
::= { activeLineSFUCtrlMcastEntry 8 }
|
||
|
||
activeLineSfuCtrlMcastGroupBw OBJECT-TYPE
|
||
SYNTAX INTEGER(1..1024000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast group bandwidth, should be <1-1024000>. default 5000."
|
||
::= { activeLineSFUCtrlMcastEntry 9 }
|
||
|
||
activeLineSfuCtrlMcastDurationTimes OBJECT-TYPE
|
||
SYNTAX INTEGER(10..6000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast duration times, should be <10-6000>. default 120(s)."
|
||
::= { activeLineSFUCtrlMcastEntry 10 }
|
||
|
||
activeLineSfuCtrlMcastNumOfTimes OBJECT-TYPE
|
||
SYNTAX INTEGER(1..255)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast number of times, should be <1-255>. default 5."
|
||
::= { activeLineSFUCtrlMcastEntry 11 }
|
||
|
||
activeLineSfuCtrlMcastTimeInterval OBJECT-TYPE
|
||
SYNTAX INTEGER(1..7200)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast time interval, should be <1-7200>. default 120(s)."
|
||
::= { activeLineSFUCtrlMcastEntry 12 }
|
||
|
||
activeLineSfuCtrlMcastResetTime OBJECT-TYPE
|
||
SYNTAX INTEGER(1..24)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast reset time, should be <1-24>. default 5(o'clock)"
|
||
::= { activeLineSFUCtrlMcastEntry 13 }
|
||
|
||
-- 1.1.3.5. activeLineHGUConfig --------------------------
|
||
activeLineHGUConfig OBJECT IDENTIFIER ::= { deployActive 5 }
|
||
|
||
-- 1.1.3.5.1. activeLineHGUTable
|
||
-- 1.1.3.5.2. activeLineHGUCtrlMcastTable
|
||
|
||
-- 1.1.3.5.1. activeLineHGUTable ------------------------
|
||
activeLineHGUTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveLineHGUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain line HGU table."
|
||
::= { activeLineHGUConfig 1 }
|
||
|
||
activeLineHGUEntry OBJECT-TYPE
|
||
SYNTAX ActiveLineHGUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active line HGU table"
|
||
INDEX { activeLineIndexVIII }
|
||
::= { activeLineHGUTable 1 }
|
||
|
||
ActiveLineHGUEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeLineIndexVIII INTEGER,
|
||
activeLineHguSwitch INTEGER,
|
||
activeLineHguFastLeaveSwitch INTEGER,
|
||
activeLineHguMaxGroups INTEGER,
|
||
activeLineHguMaxMacCount INTEGER,
|
||
activeLineHguMcastMode INTEGER,
|
||
activeLineHguDsIgmpControlType INTEGER,
|
||
activeLineHguDsIgmpVid INTEGER,
|
||
activeLineHguDsIgmpPri INTEGER,
|
||
activeLineHguUsIgmpControlType INTEGER,
|
||
activeLineHguUsIgmpVid INTEGER,
|
||
activeLineHguUsIgmpPri INTEGER
|
||
}
|
||
|
||
activeLineIndexVIII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeLineHGUEntry 1 }
|
||
|
||
activeLineHguSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineHguSwitch:
|
||
0 no shutdown(default)
|
||
1 shutdown"
|
||
::= { activeLineHGUEntry 2 }
|
||
|
||
activeLineHguFastLeaveSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineHguFlowCtrlSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { activeLineHGUEntry 3 }
|
||
|
||
activeLineHguMaxGroups OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU max igmp groups, should be inputted with <1-128>."
|
||
::= { activeLineHGUEntry 4 }
|
||
|
||
activeLineHguMaxMacCount OBJECT-TYPE
|
||
SYNTAX INTEGER(1..255)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU max mac address count, should be inputted with <1-255>."
|
||
::= { activeLineHGUEntry 5 }
|
||
|
||
activeLineHguMcastMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineHguMcastMode(some ont not support):
|
||
0 unconcern(default)
|
||
1 control
|
||
2 igmp snooping"
|
||
::= { activeLineHGUEntry 6 }
|
||
|
||
activeLineHguDsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineHguDsIgmpControlType:
|
||
0 transparent(default)
|
||
1 strip outer tag
|
||
2 add tag
|
||
3 replace tag
|
||
4 replace only vid
|
||
5 add only vid"
|
||
::= { activeLineHGUEntry 7 }
|
||
|
||
activeLineHguDsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU downstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { activeLineHGUEntry 8 }
|
||
|
||
activeLineHguDsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { activeLineHGUEntry 9 }
|
||
|
||
activeLineHguUsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineHguUsIgmpControlType:
|
||
0 transparent(default)
|
||
1 add tag
|
||
2 replace tag
|
||
3 replace only vid
|
||
4 add only vid"
|
||
::= { activeLineHGUEntry 10 }
|
||
|
||
activeLineHguUsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU upstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { activeLineHGUEntry 11 }
|
||
|
||
activeLineHguUsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { activeLineHGUEntry 12 }
|
||
|
||
-- 1.1.3.5.2. activeLineHGUCtrlMcastTable ----------------
|
||
activeLineHGUCtrlMcastTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveLineHGUCtrlMcastEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain line HGU control multicast table."
|
||
::= { activeLineHGUConfig 2 }
|
||
|
||
activeLineHGUCtrlMcastEntry OBJECT-TYPE
|
||
SYNTAX ActiveLineHGUCtrlMcastEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active line HGU control multicast table"
|
||
INDEX { activeLineIndexIX, activeLineHguCtrlMcastIndex }
|
||
::= { activeLineHGUCtrlMcastTable 1 }
|
||
|
||
ActiveLineHGUCtrlMcastEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeLineIndexIX INTEGER,
|
||
activeLineHguCtrlMcastIndex INTEGER,
|
||
activeLineHguCtrlMcastAccessType INTEGER,
|
||
activeLineHguCtrlMcastVid INTEGER,
|
||
activeLineHguCtrlMcastSrcIp IpAddress,
|
||
activeLineHguCtrlMcastDstStartIp IpAddress,
|
||
activeLineHguCtrlMcastDstEndIp IpAddress,
|
||
activeLineHguCtrlMcastGroupBw INTEGER,
|
||
activeLineHguCtrlMcastDurationTimes INTEGER,
|
||
activeLineHguCtrlMcastNumOfTimes INTEGER,
|
||
activeLineHguCtrlMcastTimeInterval INTEGER,
|
||
activeLineHguCtrlMcastResetTime INTEGER
|
||
}
|
||
|
||
activeLineIndexIX OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeLineHGUCtrlMcastEntry 1 }
|
||
|
||
activeLineHguCtrlMcastIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of HGU control multicast, the 2nd index of this table. Should in <1-16>."
|
||
::= { activeLineHGUCtrlMcastEntry 2 }
|
||
|
||
activeLineHguCtrlMcastAccessType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeLineHGUCtrlMcastAccessType:
|
||
0 del one entry
|
||
1 clear all entry
|
||
2 add permit entry
|
||
3 add preview entry"
|
||
::= { activeLineHGUCtrlMcastEntry 3 }
|
||
|
||
activeLineHguCtrlMcastVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast vlan id, should be <1-4094>."
|
||
::= { activeLineHGUCtrlMcastEntry 4 }
|
||
|
||
activeLineHguCtrlMcastSrcIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast source ip address."
|
||
::= { activeLineHGUCtrlMcastEntry 5 }
|
||
|
||
activeLineHguCtrlMcastDstStartIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast destination start ip address."
|
||
::= { activeLineHGUCtrlMcastEntry 6 }
|
||
|
||
activeLineHguCtrlMcastDstEndIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast destination end ip address."
|
||
::= { activeLineHGUCtrlMcastEntry 7 }
|
||
|
||
activeLineHguCtrlMcastGroupBw OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast group bandwidth, should be <x-x>."
|
||
::= { activeLineHGUCtrlMcastEntry 8 }
|
||
|
||
activeLineHguCtrlMcastDurationTimes OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast duration times, should be <x-x>."
|
||
::= { activeLineHGUCtrlMcastEntry 9 }
|
||
|
||
activeLineHguCtrlMcastNumOfTimes OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast number of times, should be <x-x>."
|
||
::= { activeLineHGUCtrlMcastEntry 10 }
|
||
|
||
activeLineHguCtrlMcastTimeInterval OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast time interval, should be <x-x>."
|
||
::= { activeLineHGUCtrlMcastEntry 11 }
|
||
|
||
activeLineHguCtrlMcastResetTime OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast reset time, should be <x-x>."
|
||
::= { activeLineHGUCtrlMcastEntry 12 }
|
||
|
||
-- 1.1.3.6. activeRuleTable ------------------------------
|
||
activeRuleTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveRuleEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain rule table"
|
||
::= { deployActive 6 }
|
||
|
||
activeRuleEntry OBJECT-TYPE
|
||
SYNTAX ActiveRuleEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active rule table"
|
||
INDEX { activeRuleIndex }
|
||
::= { activeRuleTable 1 }
|
||
|
||
ActiveRuleEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeRuleIndex INTEGER,
|
||
activeRuleDescription OCTET STRING,
|
||
activeRuleAction INTEGER,
|
||
activeRuleAuthIndex INTEGER,
|
||
activeRuleLineIndexesStr OCTET STRING,
|
||
activeRuleDefaultLine INTEGER
|
||
}
|
||
|
||
activeRuleIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of rule table, should be inputted with <1-4096>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeRuleEntry 1 }
|
||
|
||
activeRuleDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"rule description, max length: 128."
|
||
::= { activeRuleEntry 2 }
|
||
|
||
activeRuleAction OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"activeRuleAction:
|
||
0 permit
|
||
1 deny"
|
||
::= { activeRuleEntry 3 }
|
||
|
||
activeRuleAuthIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of rule bind auth, should be inputted with <1-4096>
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeRuleEntry 4 }
|
||
|
||
activeRuleLineIndexesStr OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"String joined by rule bind line indexes, such as '12,56,1023'.
|
||
A rule can at most bind 8 line models."
|
||
::= { activeRuleEntry 5 }
|
||
|
||
activeRuleDefaultLine OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of rule default line, should be inputted with <1-4096>
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeRuleEntry 6 }
|
||
|
||
-- 1.1.3.7. activeUniqueConfig --------------------------
|
||
activeUniqueConfig OBJECT IDENTIFIER ::= { deployActive 7 }
|
||
|
||
-- 1.1.3.7.1. activeUniquePrimaryTable
|
||
-- 1.1.3.7.2. activeUniqueSipAgentInfoTable
|
||
-- 1.1.3.7.3. activeUniqueSipUserAddrTable
|
||
-- 1.1.3.7.4. activeUniqueSipUserInfoTable
|
||
-- 1.1.3.7.5. activeUniqueSipDigitMapTable
|
||
|
||
-- 1.1.3.7.1. activeUniquePrimaryTable ------------------
|
||
activeUniquePrimaryTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveUniquePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain unique primary table"
|
||
::= { activeUniqueConfig 1 }
|
||
|
||
activeUniquePrimaryEntry OBJECT-TYPE
|
||
SYNTAX ActiveUniquePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active unique primary table"
|
||
INDEX { activeUniqueIndex }
|
||
::= { activeUniquePrimaryTable 1 }
|
||
|
||
ActiveUniquePrimaryEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeUniqueIndex INTEGER,
|
||
activeUniqueDescription OCTET STRING,
|
||
activeUniqueSn OCTET STRING
|
||
}
|
||
|
||
activeUniqueIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of unique primary table, should be inputted with <1-4096>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeUniquePrimaryEntry 1 }
|
||
|
||
activeUniqueDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"unique description, max length: 128."
|
||
::= { activeUniquePrimaryEntry 2 }
|
||
|
||
activeUniqueSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"unique sn, string-hex format, max length: 16."
|
||
::= { activeUniquePrimaryEntry 3 }
|
||
|
||
-- 1.1.3.7.2. activeUniqueSipAgentInfoTable --------------
|
||
activeUniqueSipAgentInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveUniqueSipAgentInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain unique voip sip agent info table"
|
||
::= { activeUniqueConfig 2 }
|
||
|
||
activeUniqueSipAgentInfoEntry OBJECT-TYPE
|
||
SYNTAX ActiveUniqueSipAgentInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active unique voip sip agent info table"
|
||
INDEX { activeUniqueIndexI }
|
||
::= { activeUniqueSipAgentInfoTable 1 }
|
||
|
||
ActiveUniqueSipAgentInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeUniqueIndexI INTEGER,
|
||
activeUniqueSipProxyServerIp IpAddress,
|
||
activeUniqueSipOutboundProxyIp IpAddress,
|
||
activeUniqueSipRegisterServerIp IpAddress,
|
||
activeUniqueSipAgentInfoPort INTEGER
|
||
}
|
||
|
||
activeUniqueIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of unique primary table, should be inputted with <1-4096>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeUniqueSipAgentInfoEntry 1 }
|
||
|
||
activeUniqueSipProxyServerIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info proxy server ip address."
|
||
::= { activeUniqueSipAgentInfoEntry 2 }
|
||
|
||
activeUniqueSipOutboundProxyIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info outbound proxy ip address."
|
||
::= { activeUniqueSipAgentInfoEntry 3 }
|
||
|
||
activeUniqueSipRegisterServerIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info register server ip address."
|
||
::= { activeUniqueSipAgentInfoEntry 4 }
|
||
|
||
activeUniqueSipAgentInfoPort OBJECT-TYPE
|
||
SYNTAX INTEGER(1..65535)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info port."
|
||
::= { activeUniqueSipAgentInfoEntry 5 }
|
||
|
||
-- 1.1.3.7.3. activeUniqueSipUserAddrTable --------------
|
||
activeUniqueSipUserAddrTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveUniqueSipUserAddrEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain unique voip sip user ip address table"
|
||
::= { activeUniqueConfig 3 }
|
||
|
||
activeUniqueSipUserAddrEntry OBJECT-TYPE
|
||
SYNTAX ActiveUniqueSipUserAddrEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active unique voip sip user ip address table"
|
||
INDEX { activeUniqueIndexII }
|
||
::= { activeUniqueSipUserAddrTable 1 }
|
||
|
||
ActiveUniqueSipUserAddrEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeUniqueIndexII INTEGER,
|
||
activeUniqueSipuAddressIp IpAddress,
|
||
activeUniqueSipuAddressMask IpAddress,
|
||
activeUniqueSipuAddressVlan INTEGER,
|
||
activeUniqueSipuAddressPri INTEGER
|
||
}
|
||
|
||
activeUniqueIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of unique primary table, should be inputted with <1-4096>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeUniqueSipUserAddrEntry 1 }
|
||
|
||
activeUniqueSipuAddressIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user ip address."
|
||
::= { activeUniqueSipUserAddrEntry 2 }
|
||
|
||
activeUniqueSipuAddressMask OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user mask."
|
||
::= { activeUniqueSipUserAddrEntry 3 }
|
||
|
||
activeUniqueSipuAddressVlan OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user vlan."
|
||
::= { activeUniqueSipUserAddrEntry 4 }
|
||
|
||
activeUniqueSipuAddressPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user priroty."
|
||
::= { activeUniqueSipUserAddrEntry 5 }
|
||
|
||
-- 1.1.3.7.4. activeUniqueSipUserInfoTable --------------
|
||
activeUniqueSipUserInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveUniqueSipUserInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain unique voip sip user infomation table"
|
||
::= { activeUniqueConfig 4 }
|
||
|
||
activeUniqueSipUserInfoEntry OBJECT-TYPE
|
||
SYNTAX ActiveUniqueSipUserInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of unique voip sip user infomation table"
|
||
INDEX { activeUniqueIndexIII, activeUniqueSipuInfoIndex }
|
||
::= { activeUniqueSipUserInfoTable 1 }
|
||
|
||
ActiveUniqueSipUserInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeUniqueIndexIII INTEGER,
|
||
activeUniqueSipuInfoIndex INTEGER,
|
||
activeUniqueSipuInfoUserName OCTET STRING,
|
||
activeUniqueSipuInfoPassword OCTET STRING,
|
||
activeUniqueSipuInfoTelephone OCTET STRING
|
||
}
|
||
|
||
activeUniqueIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of unique primary table, should be inputted with <1-4096>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeUniqueSipUserInfoEntry 1 }
|
||
|
||
activeUniqueSipuInfoIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..2)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of voip sip user info, the 2nd index of this table. Should in <1-2>."
|
||
::= { activeUniqueSipUserInfoEntry 2 }
|
||
|
||
activeUniqueSipuInfoUserName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..25))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user infomation user name, max length: 25."
|
||
::= { activeUniqueSipUserInfoEntry 3 }
|
||
|
||
activeUniqueSipuInfoPassword OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..25))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user infomation user name, max length: 25."
|
||
::= { activeUniqueSipUserInfoEntry 4 }
|
||
|
||
activeUniqueSipuInfoTelephone OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..25))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user infomation user name, max length: 25."
|
||
::= { activeUniqueSipUserInfoEntry 5 }
|
||
|
||
-- 1.1.3.7.5. activeUniqueSipDigitMapTable --------------
|
||
activeUniqueSipDigitMapTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ActiveUniqueSipDigitMapEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active domain unique voip sip digit map table"
|
||
::= { activeUniqueConfig 5 }
|
||
|
||
activeUniqueSipDigitMapEntry OBJECT-TYPE
|
||
SYNTAX ActiveUniqueSipDigitMapEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of active unique voip sip digit map table"
|
||
INDEX { activeUniqueIndexIV, activeUniqueSipdMapIndex }
|
||
::= { activeUniqueSipDigitMapTable 1 }
|
||
|
||
ActiveUniqueSipDigitMapEntry ::=
|
||
SEQUENCE
|
||
{
|
||
activeUniqueIndexIV INTEGER,
|
||
activeUniqueSipdMapIndex INTEGER,
|
||
activeUniqueSipdMapDialPlanToken OCTET STRING
|
||
}
|
||
|
||
activeUniqueIndexIV OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of unique primary table, should be inputted with <1-4096>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { activeUniqueSipDigitMapEntry 1 }
|
||
|
||
activeUniqueSipdMapIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..10)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of voip digit map, the 2nd index of this table. Should in <1-10>."
|
||
::= { activeUniqueSipDigitMapEntry 2 }
|
||
|
||
activeUniqueSipdMapDialPlanToken OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..28))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip digit map dial plan token, max length: 28."
|
||
::= { activeUniqueSipDigitMapEntry 3 }
|
||
|
||
-- 1.1.4. deployDemo ----------------------------------
|
||
deployDemo OBJECT IDENTIFIER ::= { configDevice 4 }
|
||
|
||
-- 1.1.4.1. demoAuthTable
|
||
-- 1.1.4.2. demoDbaTable
|
||
-- 1.1.4.3. demoLineCommonConfig
|
||
-- 1.1.4.4. demoLineSFUConfig
|
||
-- 1.1.4.5. demoLineHGUConfig
|
||
-- 1.1.4.6. demoRuleTable
|
||
-- 1.1.4.7. demoUniqueConfig
|
||
|
||
-- 1.1.4.1. demoAuthTable ------------------------------
|
||
demoAuthTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoAuthEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain auth table"
|
||
::= { deployDemo 1 }
|
||
|
||
demoAuthEntry OBJECT-TYPE
|
||
SYNTAX DemoAuthEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo auth table"
|
||
INDEX { demoAuthIndex }
|
||
::= { demoAuthTable 1 }
|
||
|
||
DemoAuthEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoAuthIndex INTEGER,
|
||
demoAuthDescription OCTET STRING,
|
||
demoAuthMode INTEGER,
|
||
demoAuthSn OCTET STRING,
|
||
demoAuthPw OCTET STRING,
|
||
demoAuthLoid OCTET STRING,
|
||
demoAuthLopw OCTET STRING,
|
||
demoAuthAssignedSlot OCTET STRING,
|
||
demoAuthAssignedPport OCTET STRING,
|
||
demoAuthAssignedOnt OCTET STRING
|
||
}
|
||
|
||
demoAuthIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of demo auth table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { demoAuthEntry 1 }
|
||
|
||
demoAuthDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth description, max length: 128."
|
||
::= { demoAuthEntry 2 }
|
||
|
||
demoAuthMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoAuthMode:
|
||
0 auth mode sn
|
||
1 auth mode pw
|
||
2 auth mode sn_pw
|
||
3 auth mode loid
|
||
4 auth mode lopw
|
||
5 auth mode loid_lopw"
|
||
::= { demoAuthEntry 3 }
|
||
|
||
demoAuthSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth sn, hex string, max length: 16."
|
||
::= { demoAuthEntry 4 }
|
||
|
||
demoAuthPw OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth password, hex string, max length: 20."
|
||
::= { demoAuthEntry 5 }
|
||
|
||
demoAuthLoid OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth loid, max length: 24."
|
||
::= { demoAuthEntry 6 }
|
||
|
||
demoAuthLopw OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"auth logic password, max length: 12."
|
||
::= { demoAuthEntry 7 }
|
||
|
||
demoAuthAssignedSlot OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slot id pre assigned."
|
||
::= { demoAuthEntry 8 }
|
||
|
||
demoAuthAssignedPport OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pon port id pre assigned."
|
||
::= { demoAuthEntry 9 }
|
||
|
||
demoAuthAssignedOnt OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont id pre assigned."
|
||
::= { demoAuthEntry 10 }
|
||
|
||
-- 1.1.4.2. demoDbaTable ------------------------------
|
||
demoDbaTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoDbaEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain dba table"
|
||
::= { deployDemo 2 }
|
||
|
||
demoDbaEntry OBJECT-TYPE
|
||
SYNTAX DemoDbaEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo dba table"
|
||
INDEX { demoDbaIndex }
|
||
::= { demoDbaTable 1 }
|
||
|
||
DemoDbaEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoDbaIndex INTEGER,
|
||
demoDbaDescription OCTET STRING,
|
||
demoDbaType INTEGER,
|
||
demoDbaFixBandwidth INTEGER,
|
||
demoDbaAssuredBandwidth INTEGER,
|
||
demoDbaMaxBandwidth INTEGER
|
||
}
|
||
|
||
demoDbaIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of demo dba table, should be inputted with <0-127>."
|
||
::= { demoDbaEntry 1 }
|
||
|
||
demoDbaDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo dba description, max length: 128."
|
||
::= { demoDbaEntry 2 }
|
||
|
||
demoDbaType OBJECT-TYPE
|
||
SYNTAX INTEGER(1..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoDbaType,
|
||
1 fixed bandwidth
|
||
2 assured bandwidth
|
||
3 assured and max bandwidth
|
||
4 max bandwidth
|
||
5 fixed and assured and max bandwidth"
|
||
::= { demoDbaEntry 3 }
|
||
|
||
demoDbaFixBandwidth OBJECT-TYPE
|
||
SYNTAX INTEGER(128..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Must to be divisible by 64kbps, must not less than 128 kbps."
|
||
::= { demoDbaEntry 4 }
|
||
|
||
demoDbaAssuredBandwidth OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1310592)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Must to be divisible by 64kbps, Can be 0.
|
||
If not 0, it must be at least 256 kbps."
|
||
::= { demoDbaEntry 5 }
|
||
|
||
demoDbaMaxBandwidth OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Must to be divisible by 64kbps, and must not be less than
|
||
the sum of assured BW plus fixedBW.
|
||
Must less than 1310720 kbps"
|
||
::= { demoDbaEntry 6 }
|
||
|
||
-- 1.1.4.3. demoLineCommonConfig ----------------------
|
||
demoLineCommonConfig OBJECT IDENTIFIER ::= { deployDemo 3 }
|
||
|
||
-- 1.1.4.3.1. demoLinePrimaryTable
|
||
-- 1.1.4.3.2. demoLineTcontTable
|
||
-- 1.1.4.3.3. demoLineGemportTable
|
||
-- 1.1.4.3.4. demoLineFlowmappingTable
|
||
-- 1.1.4.3.5. demoLineAttrMgmtTable
|
||
|
||
-- 1.1.4.3.1. demoLinePrimaryTable --------------------
|
||
demoLinePrimaryTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoLinePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain line primary table"
|
||
::= { demoLineCommonConfig 1 }
|
||
|
||
demoLinePrimaryEntry OBJECT-TYPE
|
||
SYNTAX DemoLinePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo line primary table"
|
||
INDEX { demoLineIndex }
|
||
::= { demoLinePrimaryTable 1 }
|
||
|
||
DemoLinePrimaryEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoLineIndex INTEGER,
|
||
demoLineDeviceType OCTET STRING,
|
||
demoLineDescription OCTET STRING,
|
||
demoLineTrafficMode INTEGER,
|
||
demoLineMappingMode INTEGER
|
||
}
|
||
|
||
demoLineIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of line primary table, should be inputted with <0-4095>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { demoLinePrimaryEntry 1 }
|
||
|
||
demoLineDeviceType OBJECT-TYPE
|
||
SYNTAX OCTET STRING(SIZE(7..7))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineDeviceType:
|
||
c30-214 2ETH(1ETH+1iTV)+1POTS SFU
|
||
c30-400 4ETH SFU
|
||
c30-401 4ETH+WIFI HGU
|
||
c30-420 4ETH+2POTS SFU
|
||
c30-423 4ETH+2POTS+WIFI+USB HGU
|
||
c31-423 4ETH+2POTS+WIFI+USB HGU+SFU
|
||
c40-100 1ETH SFU
|
||
c40-201 2ETH+WIFI HGU
|
||
c40-210 1GE+1FE+1POTS HGU
|
||
c40-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU
|
||
d10-423 4ETH+2POTS+WIFI+USB HGU
|
||
f10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU
|
||
h60-100 1ETH SFU
|
||
l30-100 1ETH SFU
|
||
l30-210 2ETH+1POTS SFU
|
||
m50-420 4ETH+2POTS SFU
|
||
n20-100 1ETH SFU
|
||
n20-400 4ETH SFU
|
||
n40-100 1ETH SFU
|
||
s10-214 2ETH(1ETH+1iTV)+1POTS HGU
|
||
s30-100 1ETH SFU
|
||
t10-100 1ETH SFU
|
||
t10-214 2ETH(1ETH+1iTV)+1POTS SFU
|
||
t10-403 4ETH+WIFI+USB HGU
|
||
t10-420 4ETH+2POTS SFU
|
||
t10-423 4ETH+2POTS+WIFI+USB HGU
|
||
t10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU
|
||
t60-100 1ETH SFU"
|
||
::= { demoLinePrimaryEntry 2 }
|
||
|
||
demoLineDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"line description, max length: 128."
|
||
::= { demoLinePrimaryEntry 3 }
|
||
|
||
demoLineTrafficMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineTrafficMode:
|
||
0 pri-queue: priority queue scheduling
|
||
1 gem-car: GEM traffic control"
|
||
::= { demoLinePrimaryEntry 4 }
|
||
|
||
demoLineMappingMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..6)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineMappingMode:
|
||
0 vlan
|
||
1 priority
|
||
2 vlan-priority
|
||
3 port
|
||
4 port-vlan
|
||
5 port-priority
|
||
6 port-vlan-priority"
|
||
::= { demoLinePrimaryEntry 5 }
|
||
|
||
-- 1.1.4.3.2. demoLineTcontTable ----------------------
|
||
demoLineTcontTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoLineTcontEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain line tcont table, now only for tcont bind dba."
|
||
::= { demoLineCommonConfig 2 }
|
||
|
||
demoLineTcontEntry OBJECT-TYPE
|
||
SYNTAX DemoLineTcontEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo line tcont table"
|
||
INDEX { demoLineIndex, demoLineTcontIndex }
|
||
::= { demoLineTcontTable 1 }
|
||
|
||
DemoLineTcontEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoLineTcontIndex INTEGER,
|
||
demoLineTcontDbaIndex INTEGER
|
||
}
|
||
|
||
demoLineTcontIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of tcont, the 2nd index of this table.
|
||
Should in <1-8>."
|
||
::= { demoLineTcontEntry 1 }
|
||
|
||
demoLineTcontDbaIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..127)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of tcont bind dba, should be inputted with <0-127>."
|
||
::= { demoLineTcontEntry 2 }
|
||
|
||
-- 1.1.4.3.3. demoLineGemportTable --------------------
|
||
demoLineGemportTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoLineGemportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain line gemport table."
|
||
::= { demoLineCommonConfig 3 }
|
||
|
||
demoLineGemportEntry OBJECT-TYPE
|
||
SYNTAX DemoLineGemportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo line gemport table"
|
||
INDEX { demoLineIndex, demoLineGemportIndex }
|
||
::= { demoLineGemportTable 1 }
|
||
|
||
DemoLineGemportEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoLineGemportIndex INTEGER,
|
||
demoLineGemportSvid INTEGER,
|
||
demoLineGemportTcontId INTEGER,
|
||
demoLineGemportCir INTEGER,
|
||
demoLineGemportPir INTEGER,
|
||
demoLineGemportCbs INTEGER,
|
||
demoLineGemportPbs INTEGER,
|
||
demoLineGemportPq INTEGER
|
||
}
|
||
|
||
demoLineGemportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..24)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of gemport, the 2nd index of this table.
|
||
Should in <1-24>."
|
||
::= { demoLineGemportEntry 1 }
|
||
|
||
demoLineGemportSvid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport service vlan index, should be inputted with <1-4094>."
|
||
::= { demoLineGemportEntry 2 }
|
||
|
||
demoLineGemportTcontId OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport bind tcont index, should be inputted with <1-8>."
|
||
::= { demoLineGemportEntry 3 }
|
||
|
||
demoLineGemportCir OBJECT-TYPE
|
||
SYNTAX INTEGER(64..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport committed infomation rate, should be inputted with <64-1310720>.
|
||
must to be divisible by 64kbps,must not less than 64 kbps."
|
||
::= { demoLineGemportEntry 4 }
|
||
|
||
demoLineGemportPir OBJECT-TYPE
|
||
SYNTAX INTEGER(64..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport peek infomation rate, should be inputted with <64-1310720>.
|
||
must to be divisible by 64kbps,must not less than 64 kbps."
|
||
::= { demoLineGemportEntry 5 }
|
||
|
||
demoLineGemportCbs OBJECT-TYPE
|
||
SYNTAX INTEGER(2000..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport committed burst size, should be inputted with <2000-1310720>."
|
||
::= { demoLineGemportEntry 6 }
|
||
|
||
demoLineGemportPbs OBJECT-TYPE
|
||
SYNTAX INTEGER(2000..1310720)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport peek burst size, should be inputted with <2000-1310720>."
|
||
::= { demoLineGemportEntry 7 }
|
||
|
||
demoLineGemportPq OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The gemport priority queue, should be inputted with <0-7>."
|
||
::= { demoLineGemportEntry 8 }
|
||
|
||
-- 1.1.4.3.4. demoLineFlowmappingTable ----------------
|
||
demoLineFlowmappingTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoLineFlowmappingEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain line flow mapping table."
|
||
::= { demoLineCommonConfig 4 }
|
||
|
||
demoLineFlowmappingEntry OBJECT-TYPE
|
||
SYNTAX DemoLineFlowmappingEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo line flow mapping table"
|
||
INDEX { demoLineIndex, demoLineFlowmappingIndex }
|
||
::= { demoLineFlowmappingTable 1 }
|
||
|
||
DemoLineFlowmappingEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoLineFlowmappingIndex INTEGER,
|
||
demoLineFlowmappingVid INTEGER,
|
||
demoLineFlowmappingPriority INTEGER,
|
||
demoLineFlowmappingEthport INTEGER,
|
||
demoLineFlowmappingGemport INTEGER,
|
||
demoLineFlowmappingType INTEGER
|
||
}
|
||
|
||
demoLineFlowmappingIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..48)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of flowmapping, the 2nd index of this table. Should in <1-48>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { demoLineFlowmappingEntry 1 }
|
||
|
||
demoLineFlowmappingVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping vid, should be inputted with <1-4094>."
|
||
::= { demoLineFlowmappingEntry 2 }
|
||
|
||
demoLineFlowmappingPriority OBJECT-TYPE
|
||
SYNTAX INTEGER(0..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping priority, should be inputted with <0-8>.
|
||
Value 8 means don't care 802.1p priority."
|
||
::= { demoLineFlowmappingEntry 3 }
|
||
|
||
demoLineFlowmappingEthport OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping ethernet port id, should be inputted with <1-8>."
|
||
::= { demoLineFlowmappingEntry 4 }
|
||
|
||
demoLineFlowmappingGemport OBJECT-TYPE
|
||
SYNTAX INTEGER(1..24)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The flow mapping gem port id, should be inputted with <1-24>."
|
||
::= { demoLineFlowmappingEntry 5 }
|
||
|
||
demoLineFlowmappingType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineFlowmappingType:
|
||
0 flowmapping not base port.
|
||
1 flowmapping base eth port.
|
||
2 flowmapping base veip port.
|
||
3. flowmapping base iphost port."
|
||
::= { demoLineFlowmappingEntry 6 }
|
||
|
||
-- 1.1.4.3.5. demoLineAttrMgmtTable --------------------
|
||
demoLineAttrMgmtTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoLineAttrMgmtEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain line attribute management table."
|
||
::= { demoLineCommonConfig 5 }
|
||
|
||
demoLineAttrMgmtEntry OBJECT-TYPE
|
||
SYNTAX DemoLineAttrMgmtEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo line attribute management table"
|
||
INDEX { demoLineIndex, demoLineAttrMgmtIndex }
|
||
::= { demoLineAttrMgmtTable 1 }
|
||
|
||
DemoLineAttrMgmtEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoLineAttrMgmtIndex INTEGER,
|
||
demoLineAttrMgmtNport INTEGER,
|
||
demoLineAttrMgmtVlanMode INTEGER,
|
||
demoLineAttrMgmtNportType INTEGER,
|
||
demoLineAttrMgmtEtypeFilter INTEGER,
|
||
demoLineAttrMgmtCvlanVid INTEGER,
|
||
demoLineAttrMgmtCvlanPri INTEGER,
|
||
demoLineAttrMgmtSvlanVid INTEGER,
|
||
demoLineAttrMgmtSvlanPri INTEGER
|
||
}
|
||
|
||
demoLineAttrMgmtIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..64)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of attribute management, the 2nd index of this table. Should in <1-64>."
|
||
::= { demoLineAttrMgmtEntry 1 }
|
||
|
||
demoLineAttrMgmtNport OBJECT-TYPE
|
||
SYNTAX INTEGER(1..64)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The port of attribute management, if eport, should in <1-8>."
|
||
::= { demoLineAttrMgmtEntry 2 }
|
||
|
||
demoLineAttrMgmtVlanMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineAttrMgmtVlanMode:
|
||
0 transparent
|
||
1 tag
|
||
2 translation
|
||
3 trunk
|
||
4 QinQ"
|
||
::= { demoLineAttrMgmtEntry 3 }
|
||
|
||
demoLineAttrMgmtNportType OBJECT-TYPE
|
||
SYNTAX INTEGER(1..3)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineAttrMgmtNportType:
|
||
1 eth port in sfu
|
||
2 veip port in hgu
|
||
3 iphost virtual port, for voip, tdm, etc."
|
||
::= { demoLineAttrMgmtEntry 4 }
|
||
|
||
demoLineAttrMgmtEtypeFilter OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineAttrMgmtEtypeFilter:
|
||
0 no filter
|
||
1 filter ipoe frame
|
||
2 filter pppoe frame
|
||
3 filter arp frame"
|
||
::= { demoLineAttrMgmtEntry 5 }
|
||
|
||
demoLineAttrMgmtCvlanVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"cvlan vid, should be inputted with <1-4094>."
|
||
::= { demoLineAttrMgmtEntry 6 }
|
||
|
||
demoLineAttrMgmtCvlanPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The cvlan priority, should be inputted with <0-8>.
|
||
Value 8 means don't care vlan priority."
|
||
::= { demoLineAttrMgmtEntry 7 }
|
||
|
||
demoLineAttrMgmtSvlanVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"svlan vid, should be inputted with <1-4094>."
|
||
::= { demoLineAttrMgmtEntry 8 }
|
||
|
||
demoLineAttrMgmtSvlanPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"svlan priority, should be inputted with <0-8>.
|
||
Value 8 means don't care vlan priority."
|
||
::= { demoLineAttrMgmtEntry 9 }
|
||
|
||
-- 1.1.4.4. demoLineSFUConfig --------------------------
|
||
demoLineSFUConfig OBJECT IDENTIFIER ::= { deployDemo 4 }
|
||
|
||
-- 1.1.4.4.1. demoLineSFUTable
|
||
-- 1.1.4.4.2. demoLineSFUEthportTable
|
||
-- 1.1.4.4.3. demoLineSFUCtrlMcastTable
|
||
|
||
-- 1.1.4.4.1. demoLineSFUTable ------------------------
|
||
demoLineSFUTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoLineSFUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain line SFU primary table."
|
||
::= { demoLineSFUConfig 1 }
|
||
|
||
demoLineSFUEntry OBJECT-TYPE
|
||
SYNTAX DemoLineSFUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo line sfu primary table"
|
||
INDEX { demoLineIndex }
|
||
::= { demoLineSFUTable 1 }
|
||
|
||
DemoLineSFUEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoLineSfuLocalSwitch INTEGER,
|
||
demoLineSfuLoopDetectSwitch INTEGER
|
||
}
|
||
|
||
demoLineSfuLocalSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineSfuLocalSwitch:
|
||
0 disable(default)
|
||
1 enable."
|
||
::= { demoLineSFUEntry 1 }
|
||
|
||
demoLineSfuLoopDetectSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineSfuLoopDetectSwitch:
|
||
0 disable(default)
|
||
1 enable."
|
||
::= { demoLineSFUEntry 2 }
|
||
|
||
-- 1.1.4.4.2. demoLineSFUEthportTable ------------------
|
||
demoLineSFUEthportTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoLineSFUEthportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain line SFU ethernet port table."
|
||
::= { demoLineSFUConfig 2 }
|
||
|
||
demoLineSFUEthportEntry OBJECT-TYPE
|
||
SYNTAX DemoLineSFUEthportEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo line SFU ethernet port table"
|
||
INDEX { demoLineIndex, demoLineSfuEthportIndex }
|
||
::= { demoLineSFUEthportTable 1 }
|
||
|
||
DemoLineSFUEthportEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoLineSfuEthportIndex INTEGER,
|
||
demoLineSfuEthportSwitch INTEGER,
|
||
demoLineSfuEthportFlowCtrlSwitch INTEGER,
|
||
demoLineSfuEthportLoopbackSwitch INTEGER,
|
||
demoLineSfuEthportBwEgress INTEGER,
|
||
demoLineSfuEthportFastLeaveSwitch INTEGER,
|
||
demoLineSfuEthportMaxGroups INTEGER,
|
||
demoLineSfuEthportMaxMacCount INTEGER,
|
||
demoLineSfuEthportMcastMode INTEGER,
|
||
demoLineSfuEthportDsIgmpControlType INTEGER,
|
||
demoLineSfuEthportDsIgmpVid INTEGER,
|
||
demoLineSfuEthportDsIgmpPri INTEGER,
|
||
demoLineSfuEthportUsIgmpControlType INTEGER,
|
||
demoLineSfuEthportUsIgmpVid INTEGER,
|
||
demoLineSfuEthportUsIgmpPri INTEGER
|
||
}
|
||
|
||
demoLineSfuEthportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>."
|
||
::= { demoLineSFUEthportEntry 1 }
|
||
|
||
demoLineSfuEthportSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineSfuEthportSwitch:
|
||
0 no shutdown(default)
|
||
1 shutdown"
|
||
::= { demoLineSFUEthportEntry 2 }
|
||
|
||
demoLineSfuEthportFlowCtrlSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineSfuEthportFlowCtrlSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { demoLineSFUEthportEntry 3 }
|
||
|
||
demoLineSfuEthportLoopbackSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineSfuEthportLoopbackSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { demoLineSFUEthportEntry 4 }
|
||
|
||
demoLineSfuEthportBwEgress OBJECT-TYPE
|
||
SYNTAX INTEGER(64..1023936)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port max bandwidth egress, should be inputted with <64-1023936>."
|
||
::= { demoLineSFUEthportEntry 5 }
|
||
|
||
demoLineSfuEthportFastLeaveSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineSfuEthportFastLeaveSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { demoLineSFUEthportEntry 6 }
|
||
|
||
demoLineSfuEthportMaxGroups OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port max igmp groups, should be inputted with <1-128>."
|
||
::= { demoLineSFUEthportEntry 7 }
|
||
|
||
demoLineSfuEthportMaxMacCount OBJECT-TYPE
|
||
SYNTAX INTEGER(1..255)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port max mac address count, should be inputted with <1-255>."
|
||
::= { demoLineSFUEthportEntry 8 }
|
||
|
||
demoLineSfuEthportMcastMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineSfuEthportMcastMode(some ont not support):
|
||
0 unconcern(default)
|
||
1 control
|
||
2 igmp snooping"
|
||
::= { demoLineSFUEthportEntry 9 }
|
||
|
||
demoLineSfuEthportDsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineSfuEthportDsIgmpControlType:
|
||
0 transparent(default)
|
||
1 strip outer tag
|
||
2 add tag
|
||
3 replace tag
|
||
4 replace only vid
|
||
5 add only vid"
|
||
::= { demoLineSFUEthportEntry 10 }
|
||
|
||
demoLineSfuEthportDsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port downstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { demoLineSFUEthportEntry 11 }
|
||
|
||
demoLineSfuEthportDsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { demoLineSFUEthportEntry 12 }
|
||
|
||
demoLineSfuEthportUsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineSfuEthportUsIgmpControlType:
|
||
0 transparent(default)
|
||
1 strip outer tag
|
||
2 add tag
|
||
3 replace tag
|
||
4 replace only vid
|
||
5 add only vid"
|
||
::= { demoLineSFUEthportEntry 13 }
|
||
|
||
demoLineSfuEthportUsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The SFU ethernet port upstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { demoLineSFUEthportEntry 14 }
|
||
|
||
demoLineSfuEthportUsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { demoLineSFUEthportEntry 15 }
|
||
|
||
-- 1.1.4.4.3. demoLineSFUCtrlMcastTable ----------------
|
||
demoLineSFUCtrlMcastTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoLineSFUCtrlMcastEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain line SFU ethernet port control multicast table."
|
||
::= { demoLineSFUConfig 3 }
|
||
|
||
demoLineSFUCtrlMcastEntry OBJECT-TYPE
|
||
SYNTAX DemoLineSFUCtrlMcastEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo line SFU ethernet port control multicast table"
|
||
INDEX { demoLineIndex, demoLineSfuEthportIndex, demoLineSfuCtrlMcastIndex }
|
||
::= { demoLineSFUCtrlMcastTable 1 }
|
||
|
||
DemoLineSFUCtrlMcastEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoLineSfuCtrlMcastIndex INTEGER,
|
||
demoLineSfuCtrlMcastAccessType INTEGER,
|
||
demoLineSfuCtrlMcastVid INTEGER,
|
||
demoLineSfuCtrlMcastSrcIp IpAddress,
|
||
demoLineSfuCtrlMcastDstStartIp IpAddress,
|
||
demoLineSfuCtrlMcastDstEndIp IpAddress,
|
||
demoLineSfuCtrlMcastGroupBw INTEGER,
|
||
demoLineSfuCtrlMcastDurationTimes INTEGER,
|
||
demoLineSfuCtrlMcastNumOfTimes INTEGER,
|
||
demoLineSfuCtrlMcastTimeInterval INTEGER,
|
||
demoLineSfuCtrlMcastResetTime INTEGER
|
||
}
|
||
|
||
demoLineSfuCtrlMcastIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of SFU ethernet port control multicast, the 3rd index of this table. Should in <1-16>."
|
||
::= { demoLineSFUCtrlMcastEntry 1 }
|
||
|
||
demoLineSfuCtrlMcastAccessType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineSfuCtrlMcastAccessType:
|
||
0 del one entry
|
||
1 clear all entry
|
||
2 add permit entry
|
||
3 add preview entry"
|
||
::= { demoLineSFUCtrlMcastEntry 2 }
|
||
|
||
demoLineSfuCtrlMcastVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast vlan id, should be <1-4094>."
|
||
::= { demoLineSFUCtrlMcastEntry 3 }
|
||
|
||
demoLineSfuCtrlMcastSrcIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast source ip address."
|
||
::= { demoLineSFUCtrlMcastEntry 4 }
|
||
|
||
demoLineSfuCtrlMcastDstStartIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast destination start ip address."
|
||
::= { demoLineSFUCtrlMcastEntry 5 }
|
||
|
||
demoLineSfuCtrlMcastDstEndIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast destination end ip address."
|
||
::= { demoLineSFUCtrlMcastEntry 6 }
|
||
|
||
demoLineSfuCtrlMcastGroupBw OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast group bandwidth, should be <x-x>."
|
||
::= { demoLineSFUCtrlMcastEntry 7 }
|
||
|
||
demoLineSfuCtrlMcastDurationTimes OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast duration times, should be <x-x>."
|
||
::= { demoLineSFUCtrlMcastEntry 8 }
|
||
|
||
demoLineSfuCtrlMcastNumOfTimes OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast number of times, should be <x-x>."
|
||
::= { demoLineSFUCtrlMcastEntry 9 }
|
||
|
||
demoLineSfuCtrlMcastTimeInterval OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast time interval, should be <x-x>."
|
||
::= { demoLineSFUCtrlMcastEntry 10 }
|
||
|
||
demoLineSfuCtrlMcastResetTime OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfu control multicast reset time, should be <x-x>."
|
||
::= { demoLineSFUCtrlMcastEntry 11 }
|
||
|
||
-- 1.1.4.5. demoLineHGUConfig --------------------------
|
||
demoLineHGUConfig OBJECT IDENTIFIER ::= { deployDemo 5 }
|
||
|
||
-- 1.1.4.5.1. demoLineHGUTable
|
||
-- 1.1.4.5.2. demoLineHGUCtrlMcastTable
|
||
|
||
-- 1.1.4.5.1. demoLineHGUTable ------------------------
|
||
demoLineHGUTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoLineHGUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain line HGU table."
|
||
::= { demoLineHGUConfig 1 }
|
||
|
||
demoLineHGUEntry OBJECT-TYPE
|
||
SYNTAX DemoLineHGUEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo line HGU table"
|
||
INDEX { demoLineIndex }
|
||
::= { demoLineHGUTable 1 }
|
||
|
||
DemoLineHGUEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoLineHguSwitch INTEGER,
|
||
demoLineHguFastLeaveSwitch INTEGER,
|
||
demoLineHguMaxGroups INTEGER,
|
||
demoLineHguMaxMacCount INTEGER,
|
||
demoLineHguMcastMode INTEGER,
|
||
demoLineHguDsIgmpControlType INTEGER,
|
||
demoLineHguDsIgmpVid INTEGER,
|
||
demoLineHguDsIgmpPri INTEGER,
|
||
demoLineHguUsIgmpControlType INTEGER,
|
||
demoLineHguUsIgmpVid INTEGER,
|
||
demoLineHguUsIgmpPri INTEGER
|
||
}
|
||
|
||
demoLineHguSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineHguSwitch:
|
||
0 no shutdown(default)
|
||
1 shutdown"
|
||
::= { demoLineHGUEntry 1 }
|
||
|
||
demoLineHguFastLeaveSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineHguFlowCtrlSwitch:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { demoLineHGUEntry 2 }
|
||
|
||
demoLineHguMaxGroups OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU max igmp groups, should be inputted with <1-128>."
|
||
::= { demoLineHGUEntry 3 }
|
||
|
||
demoLineHguMaxMacCount OBJECT-TYPE
|
||
SYNTAX INTEGER(1..255)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU max mac address count, should be inputted with <1-255>."
|
||
::= { demoLineHGUEntry 4 }
|
||
|
||
demoLineHguMcastMode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineHguMcastMode(some ont not support):
|
||
0 unconcern(default)
|
||
1 control
|
||
2 igmp snooping"
|
||
::= { demoLineHGUEntry 5 }
|
||
|
||
demoLineHguDsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineHguDsIgmpControlType:
|
||
0 transparent(default)
|
||
1 strip outer tag
|
||
2 add tag
|
||
3 replace tag
|
||
4 replace only vid
|
||
5 add only vid"
|
||
::= { demoLineHGUEntry 6 }
|
||
|
||
demoLineHguDsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU downstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { demoLineHGUEntry 7 }
|
||
|
||
demoLineHguDsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { demoLineHGUEntry 8 }
|
||
|
||
demoLineHguUsIgmpControlType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineHguUsIgmpControlType:
|
||
0 transparent(default)
|
||
1 strip outer tag
|
||
2 add tag
|
||
3 replace tag
|
||
4 replace only vid
|
||
5 add only vid"
|
||
::= { demoLineHGUEntry 9 }
|
||
|
||
demoLineHguUsIgmpVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HGU upstream igmp and multicast control vid,
|
||
should be inputted with <1-4094>."
|
||
::= { demoLineHGUEntry 10 }
|
||
|
||
demoLineHguUsIgmpPri OBJECT-TYPE
|
||
SYNTAX INTEGER(0..7)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan priority, should be inputted with <0-7>."
|
||
::= { demoLineHGUEntry 11 }
|
||
|
||
-- 1.1.4.5.2. demoLineHGUCtrlMcastTable ----------------
|
||
demoLineHGUCtrlMcastTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoLineHGUCtrlMcastEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain line HGU control multicast table."
|
||
::= { demoLineHGUConfig 2 }
|
||
|
||
demoLineHGUCtrlMcastEntry OBJECT-TYPE
|
||
SYNTAX DemoLineHGUCtrlMcastEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo line HGU control multicast table"
|
||
INDEX { demoLineIndex, demoLineHguCtrlMcastIndex }
|
||
::= { demoLineHGUCtrlMcastTable 1 }
|
||
|
||
DemoLineHGUCtrlMcastEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoLineHguCtrlMcastIndex INTEGER,
|
||
demoLineHguCtrlMcastAccessType INTEGER,
|
||
demoLineHguCtrlMcastVid INTEGER,
|
||
demoLineHguCtrlMcastSrcIp IpAddress,
|
||
demoLineHguCtrlMcastDstStartIp IpAddress,
|
||
demoLineHguCtrlMcastDstEndIp IpAddress,
|
||
demoLineHguCtrlMcastGroupBw INTEGER,
|
||
demoLineHguCtrlMcastDurationTimes INTEGER,
|
||
demoLineHguCtrlMcastNumOfTimes INTEGER,
|
||
demoLineHguCtrlMcastTimeInterval INTEGER,
|
||
demoLineHguCtrlMcastResetTime INTEGER
|
||
}
|
||
|
||
demoLineHguCtrlMcastIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of HGU control multicast, the 2nd index of this table. Should in <1-16>."
|
||
::= { demoLineHGUCtrlMcastEntry 1 }
|
||
|
||
demoLineHguCtrlMcastAccessType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoLineHGUCtrlMcastAccessType:
|
||
0 del one entry
|
||
1 clear all entry
|
||
2 add permit entry
|
||
3 add preview entry"
|
||
::= { demoLineHGUCtrlMcastEntry 2 }
|
||
|
||
demoLineHguCtrlMcastVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast vlan id, should be <1-4094>."
|
||
::= { demoLineHGUCtrlMcastEntry 3 }
|
||
|
||
demoLineHguCtrlMcastSrcIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast source ip address."
|
||
::= { demoLineHGUCtrlMcastEntry 4 }
|
||
|
||
demoLineHguCtrlMcastDstStartIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast destination start ip address."
|
||
::= { demoLineHGUCtrlMcastEntry 5 }
|
||
|
||
demoLineHguCtrlMcastDstEndIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast destination end ip address."
|
||
::= { demoLineHGUCtrlMcastEntry 6 }
|
||
|
||
demoLineHguCtrlMcastGroupBw OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast group bandwidth, should be <x-x>."
|
||
::= { demoLineHGUCtrlMcastEntry 7 }
|
||
|
||
demoLineHguCtrlMcastDurationTimes OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast duration times, should be <x-x>."
|
||
::= { demoLineHGUCtrlMcastEntry 8 }
|
||
|
||
demoLineHguCtrlMcastNumOfTimes OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast number of times, should be <x-x>."
|
||
::= { demoLineHGUCtrlMcastEntry 9 }
|
||
|
||
demoLineHguCtrlMcastTimeInterval OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast time interval, should be <x-x>."
|
||
::= { demoLineHGUCtrlMcastEntry 10 }
|
||
|
||
demoLineHguCtrlMcastResetTime OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hgu control multicast reset time, should be <x-x>."
|
||
::= { demoLineHGUCtrlMcastEntry 11 }
|
||
|
||
-- 1.1.4.6. demoRuleTable ------------------------------
|
||
demoRuleTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoRuleEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain rule table"
|
||
::= { deployDemo 6 }
|
||
|
||
demoRuleEntry OBJECT-TYPE
|
||
SYNTAX DemoRuleEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo rule table"
|
||
INDEX { demoRuleIndex }
|
||
::= { demoRuleTable 1 }
|
||
|
||
DemoRuleEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoRuleIndex INTEGER,
|
||
demoRuleDescription OCTET STRING,
|
||
demoRuleAction INTEGER,
|
||
demoRuleAuthIndex INTEGER,
|
||
demoRuleLineIndexesStr OCTET STRING
|
||
}
|
||
|
||
demoRuleIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of rule table, should be inputted with <1-4096>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { demoRuleEntry 1 }
|
||
|
||
demoRuleDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"rule description, max length: 128."
|
||
::= { demoRuleEntry 2 }
|
||
|
||
demoRuleAction OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demoRuleAction:
|
||
0 permit
|
||
1 deny"
|
||
::= { demoRuleEntry 3 }
|
||
|
||
demoRuleAuthIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of rule bind auth, should be inputted with <1-4096>
|
||
The range is not always fit, please see range in commands."
|
||
::= { demoRuleEntry 4 }
|
||
|
||
demoRuleLineIndexesStr OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"String joined by rule bind line indexes, such as '12,56,1023'.
|
||
A rule can at most bind 8 line models."
|
||
::= { demoRuleEntry 5 }
|
||
|
||
-- 1.1.4.7. demoUniqueConfig --------------------------
|
||
demoUniqueConfig OBJECT IDENTIFIER ::= { deployDemo 7 }
|
||
|
||
-- 1.1.4.7.1. demoUniquePrimaryTable
|
||
-- 1.1.4.7.2. demoUniqueSipAgentInfoTable
|
||
-- 1.1.4.7.3. demoUniqueSipUserAddrTable
|
||
-- 1.1.4.7.4. demoUniqueSipUserInfoTable
|
||
-- 1.1.4.7.5. demoUniqueSipDigitMapTable
|
||
|
||
-- 1.1.4.7.1. demoUniquePrimaryTable ------------------
|
||
demoUniquePrimaryTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoUniquePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain unique primary table"
|
||
::= { demoUniqueConfig 1 }
|
||
|
||
demoUniquePrimaryEntry OBJECT-TYPE
|
||
SYNTAX DemoUniquePrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo unique primary table"
|
||
INDEX { demoUniqueIndex }
|
||
::= { demoUniquePrimaryTable 1 }
|
||
|
||
DemoUniquePrimaryEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoUniqueIndex INTEGER,
|
||
demoUniqueDescription OCTET STRING,
|
||
demoUniqueSn OCTET STRING
|
||
}
|
||
|
||
demoUniqueIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of unique primary table, should be inputted with <1-4096>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { demoUniquePrimaryEntry 1 }
|
||
|
||
demoUniqueDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"unique description, max length: 128."
|
||
::= { demoUniquePrimaryEntry 2 }
|
||
|
||
demoUniqueSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"unique sn, hex format, max length: 16."
|
||
::= { demoUniquePrimaryEntry 3 }
|
||
|
||
-- 1.1.4.7.2. demoUniqueSipAgentInfoTable --------------
|
||
demoUniqueSipAgentInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoUniqueSipAgentInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain unique voip sip agent info table"
|
||
::= { demoUniqueConfig 2 }
|
||
|
||
demoUniqueSipAgentInfoEntry OBJECT-TYPE
|
||
SYNTAX DemoUniqueSipAgentInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo unique voip sip agent info table"
|
||
INDEX { demoUniqueIndex }
|
||
::= { demoUniqueSipAgentInfoTable 1 }
|
||
|
||
DemoUniqueSipAgentInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoUniqueSipProxyServerIp IpAddress,
|
||
demoUniqueSipOutboundProxyIp IpAddress,
|
||
demoUniqueSipRegisterServerIp IpAddress,
|
||
demoUniqueSipAgentInfoPort INTEGER
|
||
}
|
||
|
||
demoUniqueSipProxyServerIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info proxy server ip address."
|
||
::= { demoUniqueSipAgentInfoEntry 1 }
|
||
|
||
demoUniqueSipOutboundProxyIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info outbound proxy ip address."
|
||
::= { demoUniqueSipAgentInfoEntry 2 }
|
||
|
||
demoUniqueSipRegisterServerIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info register server ip address."
|
||
::= { demoUniqueSipAgentInfoEntry 3 }
|
||
|
||
demoUniqueSipAgentInfoPort OBJECT-TYPE
|
||
SYNTAX INTEGER(1..65535)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip agent info port."
|
||
::= { demoUniqueSipAgentInfoEntry 4 }
|
||
|
||
-- 1.1.4.7.3. demoUniqueSipUserAddrTable --------------
|
||
demoUniqueSipUserAddrTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoUniqueSipUserAddrEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain unique voip sip user ip address table"
|
||
::= { demoUniqueConfig 3 }
|
||
|
||
demoUniqueSipUserAddrEntry OBJECT-TYPE
|
||
SYNTAX DemoUniqueSipUserAddrEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo unique voip sip user ip address table"
|
||
INDEX { demoUniqueIndex }
|
||
::= { demoUniqueSipUserAddrTable 1 }
|
||
|
||
DemoUniqueSipUserAddrEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoUniqueSipuAddressIp IpAddress,
|
||
demoUniqueSipuAddressMask IpAddress,
|
||
demoUniqueSipuAddressVlan INTEGER
|
||
}
|
||
|
||
demoUniqueSipuAddressIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user ip address."
|
||
::= { demoUniqueSipUserAddrEntry 1 }
|
||
|
||
demoUniqueSipuAddressMask OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user mask."
|
||
::= { demoUniqueSipUserAddrEntry 2 }
|
||
|
||
demoUniqueSipuAddressVlan OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user vlan."
|
||
::= { demoUniqueSipUserAddrEntry 3 }
|
||
|
||
-- 1.1.4.7.4. demoUniqueSipUserInfoTable --------------
|
||
demoUniqueSipUserInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoUniqueSipUserInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain unique voip sip user infomation table"
|
||
::= { demoUniqueConfig 4 }
|
||
|
||
demoUniqueSipUserInfoEntry OBJECT-TYPE
|
||
SYNTAX DemoUniqueSipUserInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of unique voip sip user infomation table"
|
||
INDEX { demoUniqueIndex, demoUniqueSipuInfoIndex }
|
||
::= { demoUniqueSipUserInfoTable 1 }
|
||
|
||
DemoUniqueSipUserInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoUniqueSipuInfoIndex INTEGER,
|
||
demoUniqueSipuInfoUserName OCTET STRING,
|
||
demoUniqueSipuInfoPassword OCTET STRING,
|
||
demoUniqueSipuInfoTelephone OCTET STRING
|
||
}
|
||
|
||
demoUniqueSipuInfoIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..2)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of voip sip user info, the 2nd index of this table. Should in <1-2>."
|
||
::= { demoUniqueSipUserInfoEntry 1 }
|
||
|
||
demoUniqueSipuInfoUserName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..25))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user infomation user name, max length: 25."
|
||
::= { demoUniqueSipUserInfoEntry 2 }
|
||
|
||
demoUniqueSipuInfoPassword OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..25))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user infomation user name, max length: 25."
|
||
::= { demoUniqueSipUserInfoEntry 3 }
|
||
|
||
demoUniqueSipuInfoTelephone OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..25))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip user infomation user name, max length: 25."
|
||
::= { demoUniqueSipUserInfoEntry 4 }
|
||
|
||
-- 1.1.4.7.5. demoUniqueSipDigitMapTable --------------
|
||
demoUniqueSipDigitMapTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DemoUniqueSipDigitMapEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"demo domain unique voip sip digit map table"
|
||
::= { demoUniqueConfig 5 }
|
||
|
||
demoUniqueSipDigitMapEntry OBJECT-TYPE
|
||
SYNTAX DemoUniqueSipDigitMapEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of demo unique voip sip digit map table"
|
||
INDEX { demoUniqueIndex, demoUniqueSipdMapIndex }
|
||
::= { demoUniqueSipDigitMapTable 1 }
|
||
|
||
DemoUniqueSipDigitMapEntry ::=
|
||
SEQUENCE
|
||
{
|
||
demoUniqueSipdMapIndex INTEGER,
|
||
demoUniqueSipdMapDialPlanToken OCTET STRING
|
||
}
|
||
|
||
demoUniqueSipdMapIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..10)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of voip digit map, the 2nd index of this table. Should in <1-10>."
|
||
::= { demoUniqueSipDigitMapEntry 1 }
|
||
|
||
demoUniqueSipdMapDialPlanToken OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..28))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"voip sip digit map dial plan token, max length: 28."
|
||
::= { demoUniqueSipDigitMapEntry 2 }
|
||
|
||
-- 1.1.5. configDeviceBaseInfo ----------------------------
|
||
configDeviceBaseInfo OBJECT IDENTIFIER ::= { configDevice 5 }
|
||
|
||
idleTimeout OBJECT-TYPE
|
||
SYNTAX INTEGER(0..480)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"system idle timout, unit is minute."
|
||
::= { configDeviceBaseInfo 1 }
|
||
|
||
loggingDisplaySwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"loggingDisplaySwitch:
|
||
0 off(default)
|
||
1 on"
|
||
::= { configDeviceBaseInfo 2 }
|
||
|
||
ontLoggingDisplaySwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontLoggingDisplaySwitch:
|
||
0 off(default)
|
||
1 on."
|
||
::= { configDeviceBaseInfo 3 }
|
||
|
||
ponSwitchTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PonSwitchEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pon switch table."
|
||
::= { configDeviceBaseInfo 4 }
|
||
|
||
ponSwitchEntry OBJECT-TYPE
|
||
SYNTAX PonSwitchEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of pon switch table"
|
||
INDEX { ponSwitchVlanIndex }
|
||
::= { ponSwitchTable 1 }
|
||
|
||
PonSwitchEntry ::=
|
||
SEQUENCE
|
||
{
|
||
ponSwitchVlanIndex INTEGER,
|
||
ponSwitchEnable INTEGER,
|
||
ponSwitchRowStatus RowStatus
|
||
}
|
||
|
||
ponSwitchVlanIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of this table, should be inputted with <1-4094>.
|
||
The range is not always fit, please see range in commands."
|
||
::= { ponSwitchEntry 1 }
|
||
|
||
ponSwitchEnable OBJECT-TYPE
|
||
SYNTAX INTEGER(1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"1 -- enable pon-switch."
|
||
::= { ponSwitchEntry 2 }
|
||
|
||
ponSwitchRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { ponSwitchEntry 3 }
|
||
|
||
deactiveOntIdList OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"deactive ont id list, such as 0/8/1-0/8/10,0/10/10"
|
||
::= { configDeviceBaseInfo 5 }
|
||
|
||
-- 1.1.6. configEdfa --------------------------------------
|
||
configEdfa OBJECT IDENTIFIER ::= { configDevice 6 }
|
||
|
||
-- fixme: <20><>֪<EFBFBD><D6AA><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>С<EFBFBD><D0A1><EFBFBD>ģ<EFBFBD><C4A3><EFBFBD>ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD>ַ<EFBFBD><D6B7><EFBFBD><EFBFBD><EFBFBD>ʽ<EFBFBD><CABD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>н<EFBFBD><D0BD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ҫ<EFBFBD>ĸ<EFBFBD>ʽ<EFBFBD><CABD>
|
||
edfaInternalTemperature OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa internal temperature, unit is <20><>."
|
||
::= { configEdfa 1 }
|
||
|
||
edfaInputPower1 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa input power1, unit is dBm."
|
||
::= { configEdfa 2 }
|
||
|
||
edfaInputPower2 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa input power2, unit is dBm."
|
||
::= { configEdfa 3 }
|
||
|
||
edfaActualOutputPower OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa actual output power, unit is dBm."
|
||
::= { configEdfa 4 }
|
||
|
||
edfaOutputAttenuator OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa setting output attenuator, unit is dBm.
|
||
range is -0.5 to 3."
|
||
::= { configEdfa 5 }
|
||
|
||
edfaSerialNumber OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa serial number."
|
||
::= { configEdfa 6 }
|
||
|
||
edfaPumpBias1 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa pump bias, unit is A."
|
||
::= { configEdfa 7 }
|
||
|
||
edfaPumpTemperature1 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa pump temperature, unit is <20><>."
|
||
::= { configEdfa 8 }
|
||
|
||
edfaPumpTec1 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa pump temperature control current, unit is A."
|
||
::= { configEdfa 9 }
|
||
|
||
edfaPumpBias2 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa pump bias, unit is A."
|
||
::= { configEdfa 10 }
|
||
|
||
edfaPumpTemperature2 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa pump temperature, unit is <20><>."
|
||
::= { configEdfa 11 }
|
||
|
||
edfaPumpTec2 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa pump temperature control current, unit is A."
|
||
::= { configEdfa 12 }
|
||
|
||
edfaPowerVoltage OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa power voltage, unit is V."
|
||
::= { configEdfa 13 }
|
||
|
||
edfaHostname OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..32))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa name of equipment."
|
||
::= { configEdfa 14 }
|
||
|
||
edfaReset OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"set edfaReset = 1 to reset all parameter."
|
||
::= { configEdfa 15 }
|
||
|
||
--------------------------------------------------------------
|
||
------------------ 1.2. config slot ------------------------
|
||
--------------------------------------------------------------
|
||
|
||
|
||
--------------------------------------------------------------
|
||
------------------ 1.3. config pport ----------------------
|
||
--------------------------------------------------------------
|
||
-- 1.3.1. ontFindConfigTable
|
||
-- 1.3.2. ontSilentConfigTable
|
||
-- 1.3.3. configPportPrimaryTable
|
||
-- 1.3.4. configPportFecTable
|
||
|
||
-- 1.3.1. ontFindConfigTable ------------------------------
|
||
ontFindConfigTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntFindConfigEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont find config table"
|
||
::= { configPport 1 }
|
||
|
||
ontFindConfigEntry OBJECT-TYPE
|
||
SYNTAX OntFindConfigEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont find config table"
|
||
INDEX { cpSlotIndex, cpPportIndex }
|
||
::= { ontFindConfigTable 1 }
|
||
|
||
OntFindConfigEntry ::=
|
||
SEQUENCE
|
||
{
|
||
cpSlotIndex INTEGER,
|
||
cpPportIndex INTEGER,
|
||
ontFindConfigEnable INTEGER,
|
||
ontFindConfigInterval INTEGER,
|
||
ontFindConfigAgeEnable INTEGER,
|
||
ontFindConfigAgingTime INTEGER,
|
||
ontFindConfigMinDistance INTEGER,
|
||
ontFindConfigMaxDistance INTEGER,
|
||
ontFindDistanceRowStatus RowStatus
|
||
}
|
||
|
||
cpSlotIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slot index, range <0-5>."
|
||
::= { ontFindConfigEntry 1 }
|
||
|
||
cpPportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pon port index, range <1-16>."
|
||
::= { ontFindConfigEntry 2 }
|
||
|
||
ontFindConfigEnable OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontFindConfigEnable:
|
||
0 disable
|
||
1 enable"
|
||
::= { ontFindConfigEntry 3 }
|
||
|
||
ontFindConfigInterval OBJECT-TYPE
|
||
SYNTAX INTEGER(3..30)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont find interval time,range <3-30> seconds."
|
||
::= { ontFindConfigEntry 4 }
|
||
|
||
ontFindConfigAgeEnable OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontFindConfigAgeEnable:
|
||
0 disable
|
||
1 enable"
|
||
::= { ontFindConfigEntry 5 }
|
||
|
||
ontFindConfigAgingTime OBJECT-TYPE
|
||
SYNTAX INTEGER(1..86400)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont find list aging time,range <1-86400> seconds."
|
||
::= { ontFindConfigEntry 6 }
|
||
|
||
ontFindConfigMinDistance OBJECT-TYPE
|
||
SYNTAX INTEGER(0..40)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont find min distance,range <0-40> km."
|
||
::= { ontFindConfigEntry 7 }
|
||
|
||
ontFindConfigMaxDistance OBJECT-TYPE
|
||
SYNTAX INTEGER(0..60)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont find min distance,range <0-60> km."
|
||
::= { ontFindConfigEntry 8 }
|
||
|
||
ontFindDistanceRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { ontFindConfigEntry 9 }
|
||
|
||
-- 1.3.2. ontSilentConfigTable ----------------------------
|
||
ontSilentConfigTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntSilentConfigEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont silent config table"
|
||
::= { configPport 2 }
|
||
|
||
ontSilentConfigEntry OBJECT-TYPE
|
||
SYNTAX OntSilentConfigEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont silent config table"
|
||
INDEX { cpSlotIndexI, cpPportIndexI }
|
||
::= { ontSilentConfigTable 1 }
|
||
|
||
OntSilentConfigEntry ::=
|
||
SEQUENCE
|
||
{
|
||
cpSlotIndexI INTEGER,
|
||
cpPportIndexI INTEGER,
|
||
ontSilentConfigAuthFailEnable INTEGER,
|
||
ontSilentConfigAuthFailTime INTEGER,
|
||
ontSilentConfigOfflineEnable INTEGER,
|
||
ontSilentConfigOfflineTime INTEGER
|
||
}
|
||
|
||
cpSlotIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slot index, range <0-5>."
|
||
::= { ontSilentConfigEntry 1 }
|
||
|
||
cpPportIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pon port index, range <1-16>."
|
||
::= { ontSilentConfigEntry 2 }
|
||
|
||
ontSilentConfigAuthFailEnable OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontSilentConfigAuthFailEnable:
|
||
0 disable
|
||
1 enable"
|
||
::= { ontSilentConfigEntry 3 }
|
||
|
||
ontSilentConfigAuthFailTime OBJECT-TYPE
|
||
SYNTAX INTEGER(1..86400)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont silent auth fail silence time, range <1-86400> seconds."
|
||
::= { ontSilentConfigEntry 4 }
|
||
|
||
ontSilentConfigOfflineEnable OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontSilentConfigOfflineEnable:
|
||
0 disable
|
||
1 enable"
|
||
::= { ontSilentConfigEntry 5 }
|
||
|
||
ontSilentConfigOfflineTime OBJECT-TYPE
|
||
SYNTAX INTEGER(1..86400)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont silent offline silence time, range <1-86400> seconds."
|
||
::= { ontSilentConfigEntry 6 }
|
||
|
||
-- config pport primary table ------------------------------------
|
||
configPportPrimaryTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ConfigPportPrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"status pport primary table"
|
||
::= { configPport 3 }
|
||
|
||
configPportPrimaryEntry OBJECT-TYPE
|
||
SYNTAX ConfigPportPrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont find list table"
|
||
INDEX { cpSlotIndexII, cpPportIndexII }
|
||
::= { configPportPrimaryTable 1 }
|
||
|
||
ConfigPportPrimaryEntry ::=
|
||
SEQUENCE
|
||
{
|
||
cpSlotIndexII INTEGER,
|
||
cpPportIndexII INTEGER,
|
||
pportAdminStatus INTEGER,
|
||
pportLaserEnable INTEGER
|
||
}
|
||
|
||
cpSlotIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { configPportPrimaryEntry 1 }
|
||
|
||
cpPportIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { configPportPrimaryEntry 2 }
|
||
|
||
pportAdminStatus OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pportAdminStatus:
|
||
0 shutdown
|
||
1 no shutdown(default)"
|
||
::= { configPportPrimaryEntry 3 }
|
||
|
||
pportLaserEnable OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pportLaserEnable:
|
||
0 disable
|
||
1 enable(default)"
|
||
::= { configPportPrimaryEntry 4 }
|
||
|
||
-- config pport fec table ------------------------------------
|
||
configPportFecTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF ConfigPportFecEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"config pon port fec table"
|
||
::= { configPport 4 }
|
||
|
||
configPportFecEntry OBJECT-TYPE
|
||
SYNTAX ConfigPportFecEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of pon port fec table"
|
||
INDEX { cpSlotIndexII, cpPportIndexII }
|
||
::= { configPportFecTable 1 }
|
||
|
||
ConfigPportFecEntry ::=
|
||
SEQUENCE
|
||
{
|
||
cpSlotIndexIII INTEGER,
|
||
cpPportIndexIII INTEGER,
|
||
pportFecStatus INTEGER
|
||
}
|
||
|
||
cpSlotIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { configPportFecEntry 1 }
|
||
|
||
cpPportIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { configPportFecEntry 2 }
|
||
|
||
pportFecStatus OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pportFecStatus:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { configPportFecEntry 3 }
|
||
|
||
--------------------------------------------------------------
|
||
------------------ 1.4. config ont ------------------------
|
||
--------------------------------------------------------------
|
||
-- 1.4.1. ontManageTable
|
||
-- 1.4.2. ontUpgradeTable
|
||
-- 1.4.3. ontPortTable
|
||
|
||
-- 1.4.1. ontManageTable ----------------------------------
|
||
ontManageTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntManageEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont management table, such as reboot, ont statistics ethport switch, etc."
|
||
::= { configOnt 1 }
|
||
|
||
ontManageEntry OBJECT-TYPE
|
||
SYNTAX OntManageEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont silent config table"
|
||
INDEX { coSlotIndex, coPportIndex, coOntOnlineIndex }
|
||
::= { ontManageTable 1 }
|
||
|
||
OntManageEntry ::=
|
||
SEQUENCE
|
||
{
|
||
coSlotIndex INTEGER,
|
||
coPportIndex INTEGER,
|
||
coOntOnlineIndex INTEGER,
|
||
ontStatisticsEth INTEGER,
|
||
ontStatisticsGem INTEGER,
|
||
ontReboot INTEGER,
|
||
ontAdminState INTEGER,
|
||
ontFactorySet INTEGER,
|
||
protocolPort80 INTEGER,
|
||
restoreFactory INTEGER
|
||
}
|
||
|
||
coSlotIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontManageEntry 1 }
|
||
|
||
coPportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontManageEntry 2 }
|
||
|
||
coOntOnlineIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ont online index, the 3rd index of this table. range is <1-128>"
|
||
::= { ontManageEntry 3 }
|
||
|
||
ontStatisticsEth OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontStatisticsEth:
|
||
0 disable(default)
|
||
1 enable."
|
||
::= { ontManageEntry 4 }
|
||
|
||
ontStatisticsGem OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontStatisticsGem:
|
||
0 disable(default)
|
||
1 enable"
|
||
::= { ontManageEntry 5 }
|
||
|
||
ontReboot OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"set ontReboot=1 to reboot the ont, when read, always 0."
|
||
::= { ontManageEntry 6 }
|
||
|
||
ontAdminState OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontAdminState:
|
||
0 deactive
|
||
1 active(default)"
|
||
::= { ontManageEntry 7 }
|
||
|
||
ontFactorySet OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"set ontFactorySet=1 to factory setting the ont, when read, always 0."
|
||
::= { ontManageEntry 8 }
|
||
|
||
protocolPort80 OBJECT-TYPE
|
||
SYNTAX INTEGER { disable_discard(0),
|
||
disable_forward(1),
|
||
enable_discard(2),
|
||
enable_forward(3),
|
||
init(4) }
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"set protocol-port-80 disable mode discard or enable mode forward."
|
||
::= { ontManageEntry 9 }
|
||
|
||
restoreFactory OBJECT-TYPE
|
||
SYNTAX INTEGER { wan(0),
|
||
wifi(1) }
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"factory setting restore.
|
||
0: wan
|
||
1: wifi"
|
||
::= { ontManageEntry 10 }
|
||
|
||
-- 1.4.2. ontUpgradeTable ----------------------------------
|
||
ontUpgradeTable OBJECT-IDENTITY
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont upgrade table"
|
||
::= { configOnt 2 }
|
||
|
||
ontUpgradeEntry OBJECT IDENTIFIER ::= { ontUpgradeTable 1 }
|
||
|
||
OntUpgradeEntry ::=
|
||
SEQUENCE
|
||
{
|
||
ontUpgradeIdList OCTET STRING,
|
||
ontUpgradeSn OCTET STRING,
|
||
ontUpgradeParams INTEGER,
|
||
ontUpgradeRowStatus RowStatus
|
||
}
|
||
|
||
ontUpgradeIdList OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont upgrade ont-id list."
|
||
::= { ontUpgradeEntry 1 }
|
||
|
||
ontUpgradeSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..8))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont upgrade ont sn."
|
||
::= { ontUpgradeEntry 2 }
|
||
|
||
ontUpgradeParams OBJECT-TYPE
|
||
SYNTAX INTEGER(0..3)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontUpgradeParams:
|
||
0 ont upgrade
|
||
1 ont upgrade commit.
|
||
2 ont auto-reboot
|
||
3 ont manual-reboot"
|
||
::= { ontUpgradeEntry 3 }
|
||
|
||
ontUpgradeRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"RowStatus"
|
||
::= { ontUpgradeEntry 4 }
|
||
|
||
|
||
-- 1.4.3. ontPortTable ----------------------------------
|
||
ontPortTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntPortEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont port table, port config."
|
||
::= { configOnt 3 }
|
||
|
||
ontPortEntry OBJECT-TYPE
|
||
SYNTAX OntPortEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont port config table"
|
||
INDEX { ontPortSlotIndex, ontPortPportIndex, ontPortOntOnlineIndex, ontPortOntPortIndex }
|
||
::= { ontPortTable 1 }
|
||
|
||
OntPortEntry ::=
|
||
SEQUENCE
|
||
{
|
||
ontPortSlotIndex INTEGER,
|
||
ontPortPportIndex INTEGER,
|
||
ontPortOntOnlineIndex INTEGER,
|
||
ontPortOntPortIndex INTEGER,
|
||
ontPortShutdown INTEGER
|
||
}
|
||
|
||
ontPortSlotIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontPortEntry 1 }
|
||
|
||
ontPortPportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontPortEntry 2 }
|
||
|
||
ontPortOntOnlineIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ont online index, the 3rd index of this table. range is <1-128>"
|
||
::= { ontPortEntry 3 }
|
||
|
||
ontPortOntPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..24)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Ont port index, the 4th index of this table, range is <1-24>"
|
||
::= { ontPortEntry 4 }
|
||
|
||
ontPortShutdown OBJECT-TYPE
|
||
SYNTAX INTEGER { enable(0), disable(1) }
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontPortShutdown:
|
||
0 enable(default)
|
||
1 disable"
|
||
::= { ontPortEntry 5 }
|
||
|
||
--------------------------------------------------------------
|
||
------------------ 2.1. status device ----------------------
|
||
--------------------------------------------------------------
|
||
-- 2.1.1. deployStatus
|
||
-- 2.1.2. deployHistoryTable
|
||
-- 2.1.3. statusDeviceBaseInfo
|
||
|
||
-- 2.1.1. deployStatus ------------------------------------
|
||
deployStatus OBJECT IDENTIFIER ::= { statusDevice 1 }
|
||
|
||
deployStatusUserName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"user name of deploy permission owner."
|
||
::= { deployStatus 1 }
|
||
|
||
deployStatusTerminal OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"terminal of deploy permission owner."
|
||
::= { deployStatus 2 }
|
||
|
||
deployStatusUserIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ip address of deploy permission owner."
|
||
::= { deployStatus 3 }
|
||
|
||
deployStatusRequestTime OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"request time of deploy permission owner."
|
||
::= { deployStatus 4 }
|
||
|
||
deployStatusLastActiveTime OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"last active time of deploy permission owner."
|
||
::= { deployStatus 5 }
|
||
|
||
-- 2.1.2. deployHistoryTable ------------------------------
|
||
deployHistoryTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF DeployHistoryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"deploy history table"
|
||
::= { statusDevice 2 }
|
||
|
||
deployHistoryEntry OBJECT-TYPE
|
||
SYNTAX DeployHistoryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of deploy history table"
|
||
INDEX { deployHistoryIndex }
|
||
::= { deployHistoryTable 1 }
|
||
|
||
DeployHistoryEntry ::=
|
||
SEQUENCE
|
||
{
|
||
deployHistoryIndex INTEGER,
|
||
deployHistoryUserName OCTET STRING,
|
||
deployHistoryTerminal OCTET STRING,
|
||
deployHistoryUserIp IpAddress,
|
||
deployHistoryRequestTime OCTET STRING,
|
||
deployHistoryActiveTimeList OCTET STRING,
|
||
deployHistoryReleaseTime OCTET STRING
|
||
}
|
||
|
||
deployHistoryIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..19)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"index of deploy history table."
|
||
::= { deployHistoryEntry 1 }
|
||
|
||
deployHistoryUserName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"user name of deploy history entry."
|
||
::= { deployHistoryEntry 2 }
|
||
|
||
deployHistoryTerminal OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"terminal of deploy history entry."
|
||
::= { deployHistoryEntry 3 }
|
||
|
||
deployHistoryUserIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ip address of deploy history entry."
|
||
::= { deployHistoryEntry 4 }
|
||
|
||
deployHistoryRequestTime OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"request time of deploy history entry. format: yyyy-mm-dd hh:mm:ss"
|
||
::= { deployHistoryEntry 5 }
|
||
|
||
deployHistoryActiveTimeList OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"active time list of deploy history entry. format: yyyy-mm-dd hh:mm:ss,...,.."
|
||
::= { deployHistoryEntry 6 }
|
||
|
||
deployHistoryReleaseTime OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"release time of deploy history entry. format: yyyy-mm-dd hh:mm:ss"
|
||
::= { deployHistoryEntry 7 }
|
||
|
||
-- 2.1.3. statusDeviceBaseInfo ----------------------------
|
||
statusDeviceBaseInfo OBJECT IDENTIFIER ::= { statusDevice 3 }
|
||
|
||
cpuUsePercent OBJECT-TYPE
|
||
SYNTAX INTEGER(0..100)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The percentage of use CPU in current system."
|
||
::= { statusDeviceBaseInfo 1 }
|
||
|
||
memUsePercent OBJECT-TYPE
|
||
SYNTAX INTEGER(0..100)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The percentage of use memory in current system."
|
||
::= { statusDeviceBaseInfo 2 }
|
||
|
||
switchChipTemperature OBJECT-TYPE
|
||
SYNTAX INTEGER(0..100)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The temperature of switch chip in current system."
|
||
::= { statusDeviceBaseInfo 3 }
|
||
|
||
ponChipTemperature OBJECT-TYPE
|
||
SYNTAX INTEGER(0..100)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The temperature of pon chip in current system."
|
||
::= { statusDeviceBaseInfo 4 }
|
||
|
||
ontImageName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont image name "
|
||
::= { statusDeviceBaseInfo 5 }
|
||
|
||
ontImageLen OBJECT-TYPE
|
||
SYNTAX INTEGER (0..26214400)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont image length "
|
||
::= { statusDeviceBaseInfo 6 }
|
||
|
||
--------------------------------------------------------------
|
||
------------------ 2.2. status slot ------------------------
|
||
--------------------------------------------------------------
|
||
-- 2.2.1. statusSlotPrimaryTable
|
||
|
||
-- slot status primary table ------------------------------
|
||
statusSlotPrimaryTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF StatusSlotPrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slot status primary table"
|
||
::= { statusSlot 1 }
|
||
|
||
statusSlotPrimaryEntry OBJECT-TYPE
|
||
SYNTAX StatusSlotPrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of slot status primary table"
|
||
INDEX { ssSlotIndex }
|
||
::= { statusSlotPrimaryTable 1 }
|
||
|
||
StatusSlotPrimaryEntry ::=
|
||
SEQUENCE
|
||
{
|
||
ssSlotIndex INTEGER,
|
||
slotState INTEGER,
|
||
slotConfigType INTEGER,
|
||
slotTrueType INTEGER,
|
||
slotTypeIsPon INTEGER,
|
||
slotConnected INTEGER,
|
||
slotMac MacAddress,
|
||
slotSwVersion OCTET STRING,
|
||
slotHwVersion OCTET STRING
|
||
}
|
||
|
||
ssSlotIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slot index rang is 0 to 5"
|
||
::= { statusSlotPrimaryEntry 1 }
|
||
|
||
slotState OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"typedef enum
|
||
{
|
||
STATUS_DOWN = 0,
|
||
STATUS_INIT,
|
||
STATUS_LOAD,
|
||
STATUS_REG,
|
||
STATUS_CONFIG,
|
||
STATUS_ONLINE
|
||
}SLOT_STATUS_ENUM;"
|
||
::= { statusSlotPrimaryEntry 2 }
|
||
|
||
slotConfigType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"typedef enum tag_BOARD_TYPE
|
||
{
|
||
BOARD_TYPE_NULL = 0,
|
||
BOARD_TYPE_CONTROL_BCM5670,
|
||
BOARD_TYPE_LINE_24_GE_FIBER_BCM56504,
|
||
BOARD_TYPE_LINE_24_GE_COPPER_BCM56504,
|
||
BOARD_TYPE_LINE_24_GE_COPPER_BCM56524,
|
||
BOARD_TYPE_LINE_8_10GE_FIBER_BCM56820,
|
||
BOARD_TYPE_LINE_8PON_6GE_BCM56524,
|
||
BOARD_TYPE_CONTROL_BCM56720,
|
||
BOARD_TYPE_LINE_8GPON_8GE_BCM56684,
|
||
BOARD_TYPE_LINE_4pon_4_10GE_BCM56821,
|
||
BOARD_TYPE_NUM
|
||
}BOARD_TYPE;
|
||
"
|
||
::= { statusSlotPrimaryEntry 3 }
|
||
|
||
slotTrueType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"typedef enum tag_BOARD_TYPE
|
||
{
|
||
BOARD_TYPE_NULL = 0,
|
||
BOARD_TYPE_CONTROL_BCM5670,
|
||
BOARD_TYPE_LINE_24_GE_FIBER_BCM56504,
|
||
BOARD_TYPE_LINE_24_GE_COPPER_BCM56504,
|
||
BOARD_TYPE_LINE_24_GE_COPPER_BCM56524,
|
||
BOARD_TYPE_LINE_8_10GE_FIBER_BCM56820,
|
||
BOARD_TYPE_LINE_8PON_6GE_BCM56524,
|
||
BOARD_TYPE_CONTROL_BCM56720,
|
||
BOARD_TYPE_LINE_8GPON_8GE_BCM56684,
|
||
BOARD_TYPE_LINE_4pon_4_10GE_BCM56821,
|
||
BOARD_TYPE_NUM
|
||
}BOARD_TYPE;"
|
||
::= { statusSlotPrimaryEntry 4 }
|
||
|
||
slotTypeIsPon OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slotTypeIsPon:
|
||
1 true
|
||
0 false"
|
||
::= { statusSlotPrimaryEntry 5 }
|
||
|
||
slotConnected OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slotConnected:
|
||
1 true
|
||
0 false"
|
||
::= { statusSlotPrimaryEntry 6 }
|
||
|
||
slotMac OBJECT-TYPE
|
||
SYNTAX MacAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slot mac address"
|
||
::= { statusSlotPrimaryEntry 7 }
|
||
|
||
slotSwVersion OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slotSwVersion"
|
||
::= { statusSlotPrimaryEntry 8 }
|
||
|
||
slotHwVersion OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slotHwVersion"
|
||
::= { statusSlotPrimaryEntry 9 }
|
||
|
||
|
||
--------------------------------------------------------------
|
||
------------------ 2.3. status pport ----------------------
|
||
--------------------------------------------------------------
|
||
-- 2.3.1. ontFindListTable
|
||
-- 2.3.2. ontSilentListTable
|
||
-- 2.3.3. pportSfpTable
|
||
-- 2.3.4. statusPportPrimaryTable
|
||
-- 2.3.5. portUtilizationTable
|
||
|
||
-- ont find list table ------------------------------------
|
||
ontFindListTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntFindListEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont find list table"
|
||
::= { statusPport 1 }
|
||
|
||
ontFindListEntry OBJECT-TYPE
|
||
SYNTAX OntFindListEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont find list table"
|
||
INDEX { spSlotIndex, spPportIndex, ontFindListListId }
|
||
::= { ontFindListTable 1 }
|
||
|
||
OntFindListEntry ::=
|
||
SEQUENCE
|
||
{
|
||
spSlotIndex INTEGER,
|
||
spPportIndex INTEGER,
|
||
ontFindListListId INTEGER,
|
||
ontFindListSn OCTET STRING,
|
||
ontFindListPw OCTET STRING,
|
||
ontFindListLoid OCTET STRING,
|
||
ontFindListLopw OCTET STRING,
|
||
ontFindListVendorId OCTET STRING,
|
||
ontFindListPriSwVer OCTET STRING,
|
||
ontFindListSecSwVer OCTET STRING,
|
||
ontFindListHwVer OCTET STRING,
|
||
ontFindListEquipId OCTET STRING,
|
||
ontFindListFirstFindTime OCTET STRING,
|
||
ontFindListLastFindTime OCTET STRING,
|
||
ontFindListFindCnt OCTET STRING
|
||
}
|
||
|
||
spSlotIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontFindListEntry 1 }
|
||
|
||
spPportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontFindListEntry 2 }
|
||
|
||
ontFindListListId OBJECT-TYPE
|
||
SYNTAX INTEGER(0..255)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont find list table."
|
||
::= { ontFindListEntry 3 }
|
||
|
||
ontFindListSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"serial number of ont find list entry."
|
||
::= { ontFindListEntry 4 }
|
||
|
||
ontFindListPw OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"password of ont find list entry."
|
||
::= { ontFindListEntry 5 }
|
||
|
||
ontFindListLoid OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"logic id of ont find list entry."
|
||
::= { ontFindListEntry 6 }
|
||
|
||
ontFindListLopw OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"logic password of ont find list entry."
|
||
::= { ontFindListEntry 7 }
|
||
|
||
ontFindListVendorId OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"vendor id of ont find list entry."
|
||
::= { ontFindListEntry 8 }
|
||
|
||
ontFindListPriSwVer OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"primary software version of ont find list entry."
|
||
::= { ontFindListEntry 9 }
|
||
|
||
ontFindListSecSwVer OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"secondary software version of ont find list entry."
|
||
::= { ontFindListEntry 10 }
|
||
|
||
ontFindListHwVer OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"hardware version of ont find list entry."
|
||
::= { ontFindListEntry 11 }
|
||
|
||
ontFindListEquipId OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"equipment id of ont find list entry."
|
||
::= { ontFindListEntry 12 }
|
||
|
||
ontFindListFirstFindTime OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"first find time of ont find list entry."
|
||
::= { ontFindListEntry 13 }
|
||
|
||
ontFindListLastFindTime OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"last find time of ont find list entry."
|
||
::= { ontFindListEntry 14 }
|
||
|
||
ontFindListFindCnt OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"find count of ont find list entry."
|
||
::= { ontFindListEntry 15 }
|
||
|
||
-- ont silent list table ----------------------------------
|
||
ontSilentListTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntSilentListEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont silent list table"
|
||
::= { statusPport 2 }
|
||
|
||
ontSilentListEntry OBJECT-TYPE
|
||
SYNTAX OntSilentListEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont find list table"
|
||
INDEX { spSlotIndexI, spPportIndexI, ontSilentListListId }
|
||
::= { ontSilentListTable 1 }
|
||
|
||
OntSilentListEntry ::=
|
||
SEQUENCE
|
||
{
|
||
spSlotIndexI INTEGER,
|
||
spPportIndexI INTEGER,
|
||
ontSilentListListId INTEGER,
|
||
ontSilentListSn OCTET STRING,
|
||
ontSilentListTime INTEGER,
|
||
ontSilentListReason OCTET STRING
|
||
}
|
||
|
||
spSlotIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontSilentListEntry 1 }
|
||
|
||
spPportIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontSilentListEntry 2 }
|
||
|
||
ontSilentListListId OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont silent list table."
|
||
::= { ontSilentListEntry 3 }
|
||
|
||
ontSilentListSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"serial number of ont silent list entry."
|
||
::= { ontSilentListEntry 4 }
|
||
|
||
ontSilentListTime OBJECT-TYPE
|
||
SYNTAX INTEGER(1..86400)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"remain time of ont silent list entry, unit is second."
|
||
::= { ontSilentListEntry 5 }
|
||
|
||
ontSilentListReason OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"silent reason of ont silent list entry."
|
||
::= { ontSilentListEntry 6 }
|
||
|
||
-- 2.3.1. pportSfpTable ------------------------------
|
||
pportSfpTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PportSfpEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pport sfp info table"
|
||
::= { statusPport 3 }
|
||
|
||
pportSfpEntry OBJECT-TYPE
|
||
SYNTAX PportSfpEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of pport sfp info table"
|
||
INDEX { spSlotIndexII, spPportIndexII }
|
||
::= { pportSfpTable 1 }
|
||
|
||
PportSfpEntry ::=
|
||
SEQUENCE
|
||
{
|
||
spSlotIndexII INTEGER,
|
||
spPportIndexII INTEGER,
|
||
sfpTransceiverType OCTET STRING,
|
||
sfpCompliance OCTET STRING,
|
||
sfpConnectorType OCTET STRING,
|
||
sfpWaveLength OCTET STRING,
|
||
sfpTransferDistance OCTET STRING,
|
||
sfpDigitalDiagMonitor OCTET STRING,
|
||
sfpManuSerialNumber OCTET STRING,
|
||
sfpManufacturingDate OCTET STRING,
|
||
sfpVendorName OCTET STRING,
|
||
sfpTemperature OCTET STRING,
|
||
sfpVoltage OCTET STRING,
|
||
sfpBiasCurrent OCTET STRING,
|
||
sfpBiasHighThreshold OCTET STRING,
|
||
sfpBiasLowThreshold OCTET STRING,
|
||
sfpRXPower OCTET STRING,
|
||
sfpRXPowerHighThreshold OCTET STRING,
|
||
sfpRXPowerLowThreshold OCTET STRING,
|
||
sfpTXPower OCTET STRING,
|
||
sfpTXPowerHighThreshold OCTET STRING,
|
||
sfpTXPowerLowThreshold OCTET STRING,
|
||
sfpExist INTEGER,
|
||
sfpLinkState INTEGER,
|
||
sfpModuleType INTEGER,
|
||
sfpModuleSubType INTEGER,
|
||
sfpUsedType INTEGER,
|
||
sfpPartNumber OCTET STRING
|
||
}
|
||
|
||
spSlotIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { pportSfpEntry 1 }
|
||
|
||
spPportIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { pportSfpEntry 2 }
|
||
|
||
sfpTransceiverType OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp transceiver type."
|
||
::= { pportSfpEntry 3 }
|
||
|
||
sfpCompliance OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp compliance."
|
||
::= { pportSfpEntry 4 }
|
||
|
||
sfpConnectorType OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp connector type."
|
||
::= { pportSfpEntry 5 }
|
||
|
||
sfpWaveLength OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp wave length."
|
||
::= { pportSfpEntry 6 }
|
||
|
||
sfpTransferDistance OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp transfer distance."
|
||
::= { pportSfpEntry 7 }
|
||
|
||
sfpDigitalDiagMonitor OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp digital diagnostic monitoring."
|
||
::= { pportSfpEntry 8 }
|
||
|
||
sfpManuSerialNumber OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp manufacturing serial number."
|
||
::= { pportSfpEntry 9 }
|
||
|
||
sfpManufacturingDate OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp manufacturing date."
|
||
::= { pportSfpEntry 10 }
|
||
|
||
sfpVendorName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp vendor name."
|
||
::= { pportSfpEntry 11 }
|
||
|
||
sfpTemperature OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp temperature(<28><>C)."
|
||
::= { pportSfpEntry 12 }
|
||
|
||
sfpVoltage OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp voltage(V)."
|
||
::= { pportSfpEntry 13 }
|
||
|
||
sfpBiasCurrent OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp bias current(mA)."
|
||
::= { pportSfpEntry 14 }
|
||
|
||
sfpBiasHighThreshold OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp bias high threshold(mA)."
|
||
::= { pportSfpEntry 15 }
|
||
|
||
sfpBiasLowThreshold OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp bias low threshold(mA)."
|
||
::= { pportSfpEntry 16 }
|
||
|
||
sfpRXPower OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp rx power(dBm)."
|
||
::= { pportSfpEntry 17 }
|
||
|
||
sfpRXPowerHighThreshold OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp rx power high threshold(dBm)."
|
||
::= { pportSfpEntry 18 }
|
||
|
||
sfpRXPowerLowThreshold OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp rx power low threshold(dBm)."
|
||
::= { pportSfpEntry 19 }
|
||
|
||
sfpTXPower OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp tx power(dBm)."
|
||
::= { pportSfpEntry 20 }
|
||
|
||
sfpTXPowerHighThreshold OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp tx power high threshold(dBm)."
|
||
::= { pportSfpEntry 21 }
|
||
|
||
sfpTXPowerLowThreshold OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp tx power low threshold(dBm)."
|
||
::= { pportSfpEntry 22 }
|
||
|
||
sfpExist OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfpExist:
|
||
0 false
|
||
1 true"
|
||
::= { pportSfpEntry 23 }
|
||
|
||
sfpLinkState OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfpLinkState:
|
||
0 link down
|
||
1 link up"
|
||
::= { pportSfpEntry 24 }
|
||
|
||
sfpModuleType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfpModuleType:
|
||
0 unknown
|
||
1 GPON"
|
||
::= { pportSfpEntry 25 }
|
||
|
||
sfpModuleSubType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfpModuleSubType:
|
||
0 unknown
|
||
1 Class B+
|
||
2 Class C+"
|
||
::= { pportSfpEntry 26 }
|
||
|
||
sfpUsedType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sfpModuleSubType:
|
||
0 unknown
|
||
1 ONT"
|
||
::= { pportSfpEntry 27 }
|
||
|
||
sfpPartNumber OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sfp manufacturing type."
|
||
::= { pportSfpEntry 28 }
|
||
|
||
-- status pport primary table
|
||
statusPportPrimaryTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF StatusPportPrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"status pport primary table"
|
||
::= { statusPport 4 }
|
||
|
||
statusPportPrimaryEntry OBJECT-TYPE
|
||
SYNTAX StatusPportPrimaryEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont find list table"
|
||
INDEX { spSlotIndexIII, spPportIndexIII }
|
||
::= { statusPportPrimaryTable 1 }
|
||
|
||
StatusPportPrimaryEntry ::=
|
||
SEQUENCE
|
||
{
|
||
spSlotIndexIII INTEGER,
|
||
spPportIndexIII INTEGER,
|
||
pportLinkStatus INTEGER
|
||
}
|
||
|
||
spSlotIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { statusPportPrimaryEntry 1 }
|
||
|
||
spPportIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { statusPportPrimaryEntry 2 }
|
||
|
||
pportLinkStatus OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"pportLinkStatus:
|
||
0 link down
|
||
1 link up"
|
||
::= { statusPportPrimaryEntry 3 }
|
||
|
||
-- port utilization table ------------------------------------
|
||
portUtilizationTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF PortUtilizationEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port utilization table"
|
||
::= { statusPport 5 }
|
||
|
||
portUtilizationEntry OBJECT-TYPE
|
||
SYNTAX PortUtilizationEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of port utilization table"
|
||
INDEX { spSlotIndexPort, spPortIndex }
|
||
::= { portUtilizationTable 1 }
|
||
|
||
PortUtilizationEntry ::=
|
||
SEQUENCE
|
||
{
|
||
spSlotIndexPort INTEGER,
|
||
spPortIndex INTEGER,
|
||
spUtilizeTxOctetsRate INTEGER,
|
||
spUtilizeRxOctetsRate INTEGER,
|
||
spUtilizeTxBwThoughput INTEGER,
|
||
spUtilizeRxBwThoughput INTEGER,
|
||
spUtilizeTxPktsRate INTEGER,
|
||
spUtilizeRxPktsRate INTEGER,
|
||
spUtilizeTxOctetsMaxRate INTEGER,
|
||
spUtilizeRxOctetsMaxRate INTEGER
|
||
}
|
||
|
||
spSlotIndexPort OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { portUtilizationEntry 1 }
|
||
|
||
spPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of port, should in <1-16>."
|
||
::= { portUtilizationEntry 2 }
|
||
|
||
spUtilizeTxOctetsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port tx octets rate."
|
||
::= { portUtilizationEntry 3 }
|
||
|
||
spUtilizeRxOctetsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port rx octets rate."
|
||
::= { portUtilizationEntry 4 }
|
||
|
||
spUtilizeTxBwThoughput OBJECT-TYPE
|
||
SYNTAX INTEGER(0..100)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port tx bandwidth thoughput."
|
||
::= { portUtilizationEntry 5 }
|
||
|
||
spUtilizeRxBwThoughput OBJECT-TYPE
|
||
SYNTAX INTEGER(0..100)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port rx bandwidth thoughput."
|
||
::= { portUtilizationEntry 6 }
|
||
|
||
spUtilizeTxPktsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1600000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port tx packets rate."
|
||
::= { portUtilizationEntry 7 }
|
||
|
||
spUtilizeRxPktsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1600000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port rx packets rate."
|
||
::= { portUtilizationEntry 8 }
|
||
|
||
spUtilizeTxOctetsMaxRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port tx octets max rate."
|
||
::= { portUtilizationEntry 9 }
|
||
|
||
spUtilizeRxOctetsMaxRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port rx octets max rate."
|
||
::= { portUtilizationEntry 10 }
|
||
|
||
--------------------------------------------------------------
|
||
------------------ 2.4. status ont ------------------------
|
||
--------------------------------------------------------------
|
||
-- 2.4.1 ontInfo
|
||
-- 2.4.2 ontEthPortInfo
|
||
-- 2.4.3 ontGemPortInfo
|
||
-- 2.4.4 ontWanInfo
|
||
-- 2.4.5 ontPotsInfo
|
||
|
||
-- ont infomation ------------------------------------------
|
||
ontInfo OBJECT IDENTIFIER ::= { statusOnt 1 }
|
||
|
||
-- 2.4.1.1 ontBaseInfoTable
|
||
-- 2.4.1.2 ontVersionInfoTable
|
||
-- 2.4.1.3 ontCapabilityTable
|
||
-- 2.4.1.4 ontOpticalInfoTable
|
||
-- 2.4.1.5 ontProfileInfoTable
|
||
-- 2.4.1.6 ontUpgradeStatusTable
|
||
-- 2.4.1.7 ontStatisticsTable
|
||
-- 2.4.1.8 ontUtilizationTable
|
||
-- 2.4.1.9 ontOpticalSwTable
|
||
-- 2.4.1.10 ontMacAddrTable
|
||
|
||
-- ont base status table ----------------------------------
|
||
ontBaseInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntBaseInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont base infomation table"
|
||
::= { ontInfo 1 }
|
||
|
||
ontBaseInfoEntry OBJECT-TYPE
|
||
SYNTAX OntBaseInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont base infomation table"
|
||
INDEX { soSlotIndex, soPportIndex, soOntIndex }
|
||
::= { ontBaseInfoTable 1 }
|
||
|
||
OntBaseInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndex INTEGER,
|
||
soPportIndex INTEGER,
|
||
soOntIndex INTEGER,
|
||
ontDescription OCTET STRING,
|
||
ontDeviceType OCTET STRING,
|
||
ontRunStatus INTEGER,
|
||
ontDistance OCTET STRING,
|
||
ontSn OCTET STRING,
|
||
ontPw OCTET STRING,
|
||
ontLoid OCTET STRING,
|
||
ontLopw OCTET STRING,
|
||
ontOfflineReason OCTET STRING,
|
||
ontOnOfflineTime OCTET STRING,
|
||
ontUpDownTime OCTET STRING
|
||
}
|
||
|
||
soSlotIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontBaseInfoEntry 1 }
|
||
|
||
soPportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontBaseInfoEntry 2 }
|
||
|
||
soOntIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontBaseInfoEntry 3 }
|
||
|
||
ontDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont description."
|
||
::= { ontBaseInfoEntry 4 }
|
||
|
||
ontDeviceType OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont device type."
|
||
::= { ontBaseInfoEntry 5 }
|
||
|
||
ontRunStatus OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontRunStatus:
|
||
0 offline
|
||
1 online"
|
||
::= { ontBaseInfoEntry 6 }
|
||
|
||
ontDistance OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont distance."
|
||
::= { ontBaseInfoEntry 7 }
|
||
|
||
ontSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont serial number, hex string format."
|
||
::= { ontBaseInfoEntry 8 }
|
||
|
||
ontPw OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont password, hex string format."
|
||
::= { ontBaseInfoEntry 9 }
|
||
|
||
ontLoid OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"logical ont id, Charactor format."
|
||
::= { ontBaseInfoEntry 10 }
|
||
|
||
ontLopw OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"logical ont password, Charactor format."
|
||
::= { ontBaseInfoEntry 11 }
|
||
|
||
ontOfflineReason OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont off line reason.
|
||
0: NONE Reason get fail ԭ<><D4AD><EFBFBD><EFBFBD>ȡʧ<C8A1><CAA7>
|
||
1: DEACTIVATION ONT DEACTIVED ONTȥ<54><C8A5><EFBFBD><EFBFBD>
|
||
2: ACK_TIMEOUT ONT acknowledge time out ONTȷ<54><C8B7><EFBFBD><EFBFBD>Ӧ<EFBFBD><D3A6>ʱ
|
||
3: SFI Signal fail of ONT ONT<4E>ź<EFBFBD>ʧЧ
|
||
4: TIWI Transmission interface warning ONT<4E><54><EFBFBD><EFBFBD><EFBFBD>˿ھ<CBBF>ʾ
|
||
5: PASSWORD_AUTHENTICATION ONT password authentication fail ONT<4E><54><EFBFBD><EFBFBD><EFBFBD><EFBFBD>֤ʧ<D6A4><CAA7>
|
||
6: LOSI Loss of signal for ONT ONT<4E><54><EFBFBD><EFBFBD><EFBFBD>źŶ<C5BA>ʧ
|
||
7: LOS Loss of signal for OLT OLT<4C><54><EFBFBD><EFBFBD><EFBFBD>źŶ<C5BA>ʧ
|
||
8: LOKI Loss of key synch with ONT ONTͬ<54><CDAC><EFBFBD><EFBFBD>Կ<EFBFBD><D4BF>ʧ
|
||
9: RERANGE_FAILURE ONT re-ranging fail ONT<4E>ز<EFBFBD><D8B2><EFBFBD>ʧ<EFBFBD><CAA7>
|
||
10: LOFI Loss of frame of ONT ONT<4E><54><EFBFBD><EFBFBD>֡<EFBFBD><D6A1>ʧ
|
||
11: POWER_OFF ONT power off ONT<4E><54><EFBFBD><EFBFBD>
|
||
12: UNKNOWN UNKNOWN δ֪
|
||
13: LOAMI Loss of PLOAM for ONT ONT<4E><54><EFBFBD><EFBFBD>PLOAM<41><4D>ʧ
|
||
"
|
||
::= { ontBaseInfoEntry 12 }
|
||
|
||
ontOnOfflineTime OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont on/off line time."
|
||
::= { ontBaseInfoEntry 13 }
|
||
|
||
ontUpDownTime OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont up/down time."
|
||
::= { ontBaseInfoEntry 14 }
|
||
|
||
-- ont version info table ----------------------------------
|
||
ontVersionInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntVersionInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont version info table"
|
||
::= { ontInfo 2 }
|
||
|
||
ontVersionInfoEntry OBJECT-TYPE
|
||
SYNTAX OntVersionInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont version info table"
|
||
INDEX { soSlotIndexI, soPportIndexI, soOntIndexI }
|
||
::= { ontVersionInfoTable 1 }
|
||
|
||
OntVersionInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexI INTEGER,
|
||
soPportIndexI INTEGER,
|
||
soOntIndexI INTEGER,
|
||
ontVendorId OCTET STRING,
|
||
ontVersion OCTET STRING,
|
||
ontEquipmentId OCTET STRING,
|
||
ontMainSwVersion OCTET STRING,
|
||
ontSecondSwVersion OCTET STRING
|
||
}
|
||
|
||
soSlotIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontVersionInfoEntry 1 }
|
||
|
||
soPportIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontVersionInfoEntry 2 }
|
||
|
||
soOntIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontVersionInfoEntry 3 }
|
||
|
||
ontVendorId OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont vendor id."
|
||
::= { ontVersionInfoEntry 4 }
|
||
|
||
ontVersion OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont version."
|
||
::= { ontVersionInfoEntry 5 }
|
||
|
||
ontEquipmentId OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont equipment id."
|
||
::= { ontVersionInfoEntry 6 }
|
||
|
||
ontMainSwVersion OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont primary software version."
|
||
::= { ontVersionInfoEntry 7 }
|
||
|
||
ontSecondSwVersion OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont secondary software version."
|
||
::= { ontVersionInfoEntry 8 }
|
||
|
||
-- ont capability info table ------------------------------
|
||
ontCapabilityTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntCapabilityEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont capability info table."
|
||
::= { ontInfo 3 }
|
||
|
||
ontCapabilityEntry OBJECT-TYPE
|
||
SYNTAX OntCapabilityEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont capability info table"
|
||
INDEX { soSlotIndexII, soPportIndexII, soOntIndexII }
|
||
::= { ontCapabilityTable 1 }
|
||
|
||
OntCapabilityEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexII INTEGER,
|
||
soPportIndexII INTEGER,
|
||
soOntIndexII INTEGER,
|
||
ontCapEquipId OCTET STRING,
|
||
ontUplinkPonPortsNum INTEGER,
|
||
ontPotsPortsNum INTEGER,
|
||
ontEthPortsNum INTEGER,
|
||
ontTdmPortsNum INTEGER,
|
||
ontMocaPortsNum INTEGER,
|
||
ontCatvAniPortsNum INTEGER,
|
||
ontCatvUniPortsNum INTEGER,
|
||
ontTcontsNum INTEGER,
|
||
ontGemPortsNum INTEGER,
|
||
ontTrafficSchedulersNum INTEGER,
|
||
ontPqsInTconts OCTET STRING,
|
||
ontIpConfigSupport OCTET STRING,
|
||
ontFlowCtrlType OCTET STRING,
|
||
ontTXpowerCutOffSupport OCTET STRING,
|
||
ontDbaMethod OCTET STRING
|
||
}
|
||
|
||
soSlotIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontCapabilityEntry 1 }
|
||
|
||
soPportIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontCapabilityEntry 2 }
|
||
|
||
soOntIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontCapabilityEntry 3 }
|
||
|
||
ontCapEquipId OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont equipment id."
|
||
::= { ontCapabilityEntry 4 }
|
||
|
||
ontUplinkPonPortsNum OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"number of uplink PON ports."
|
||
::= { ontCapabilityEntry 5 }
|
||
|
||
ontPotsPortsNum OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"number of POTS ports."
|
||
::= { ontCapabilityEntry 6 }
|
||
|
||
ontEthPortsNum OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"number of ETH ports."
|
||
::= { ontCapabilityEntry 7 }
|
||
|
||
ontTdmPortsNum OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"number of TDM ports."
|
||
::= { ontCapabilityEntry 8 }
|
||
|
||
ontMocaPortsNum OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"number of MOCA ports."
|
||
::= { ontCapabilityEntry 9 }
|
||
|
||
ontCatvAniPortsNum OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"number of CATV ANI ports."
|
||
::= { ontCapabilityEntry 10 }
|
||
|
||
ontCatvUniPortsNum OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"number of CATV UNI ports."
|
||
::= { ontCapabilityEntry 11 }
|
||
|
||
ontTcontsNum OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"number of T-CONTs."
|
||
::= { ontCapabilityEntry 12 }
|
||
|
||
ontGemPortsNum OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"number of GEM ports."
|
||
::= { ontCapabilityEntry 13 }
|
||
|
||
ontTrafficSchedulersNum OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"number of traffic schedulers."
|
||
::= { ontCapabilityEntry 14 }
|
||
|
||
ontPqsInTconts OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont support ip configuration or not."
|
||
::= { ontCapabilityEntry 15 }
|
||
|
||
ontIpConfigSupport OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont support ip configuration or not."
|
||
::= { ontCapabilityEntry 16 }
|
||
|
||
|
||
ontFlowCtrlType OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont flow control type."
|
||
::= { ontCapabilityEntry 17 }
|
||
|
||
ontTXpowerCutOffSupport OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont support TX power cut off or not."
|
||
::= { ontCapabilityEntry 18 }
|
||
|
||
ontDbaMethod OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont dba method.
|
||
NSR(default): not support SR
|
||
SR: support SR
|
||
-: invalid"
|
||
::= { ontCapabilityEntry 19 }
|
||
|
||
-- ont optical info table ----------------------------------
|
||
ontOpticalInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntOpticalInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont optical info table"
|
||
::= { ontInfo 4 }
|
||
|
||
ontOpticalInfoEntry OBJECT-TYPE
|
||
SYNTAX OntOpticalInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont optical info table"
|
||
INDEX { soSlotIndexIII, soPportIndexIII, soOntIndexIII }
|
||
::= { ontOpticalInfoTable 1 }
|
||
|
||
OntOpticalInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexIII INTEGER,
|
||
soPportIndexIII INTEGER,
|
||
soOntIndexIII INTEGER,
|
||
ontVoltage OCTET STRING,
|
||
ontRXPower OCTET STRING,
|
||
ontTXPower OCTET STRING,
|
||
ontBiasCurrent OCTET STRING,
|
||
ontTemperature OCTET STRING,
|
||
ontRxCatvPower OCTET STRING,
|
||
ontTxCatvPower OCTET STRING,
|
||
ontOltRxPower OCTET STRING,
|
||
ontOltTxPower OCTET STRING
|
||
}
|
||
|
||
soSlotIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontOpticalInfoEntry 1 }
|
||
|
||
soPportIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontOpticalInfoEntry 2 }
|
||
|
||
soOntIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontOpticalInfoEntry 3 }
|
||
|
||
ontVoltage OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont power feed voltage(V)."
|
||
::= { ontOpticalInfoEntry 4 }
|
||
|
||
ontRXPower OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont received optical power(dBm)."
|
||
::= { ontOpticalInfoEntry 5 }
|
||
|
||
ontTXPower OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont mean optical launch power(dBm)."
|
||
::= { ontOpticalInfoEntry 6 }
|
||
|
||
ontBiasCurrent OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont laser bias current(uA)."
|
||
::= { ontOpticalInfoEntry 7 }
|
||
|
||
ontTemperature OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont temperature(<28><>C)."
|
||
::= { ontOpticalInfoEntry 8 }
|
||
|
||
ontRxCatvPower OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont received catv power(dBm)."
|
||
::= { ontOpticalInfoEntry 9 }
|
||
|
||
ontTxCatvPower OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont transmitted catv power(dBmV)."
|
||
::= { ontOpticalInfoEntry 10 }
|
||
|
||
ontOltRxPower OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt received ont power(dBm)."
|
||
::= { ontOpticalInfoEntry 11 }
|
||
|
||
ontOltTxPower OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt transmitted power(dBm)."
|
||
::= { ontOpticalInfoEntry 12 }
|
||
|
||
-- ont profile info table ----------------------------------
|
||
ontProfileInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntProfileInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont optical info table"
|
||
::= { ontInfo 5 }
|
||
|
||
ontProfileInfoEntry OBJECT-TYPE
|
||
SYNTAX OntProfileInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont profile info table"
|
||
INDEX { soSlotIndexIV, soPportIndexIV, soOntIndexIV }
|
||
::= { ontProfileInfoTable 1 }
|
||
|
||
OntProfileInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexIV INTEGER,
|
||
soPportIndexIV INTEGER,
|
||
soOntIndexIV INTEGER,
|
||
ontProfileSn OCTET STRING,
|
||
ontProfileVlanIdxes OCTET STRING,
|
||
ontProfileVlanNames OCTET STRING,
|
||
ontProfileUsIdxes OCTET STRING,
|
||
ontProfileUsNames OCTET STRING,
|
||
ontProfileDsIdxes OCTET STRING,
|
||
ontProfileDsNames OCTET STRING,
|
||
ontProfileDbaIdxes OCTET STRING,
|
||
ontProfileDbaNames OCTET STRING,
|
||
ontProfileLineIdx INTEGER,
|
||
ontProfileLineName OCTET STRING,
|
||
ontProfileRuleIdx INTEGER,
|
||
ontProfileRuleName OCTET STRING,
|
||
ontProfileUniqueIdx OCTET STRING,
|
||
ontProfileUniqueName OCTET STRING
|
||
}
|
||
|
||
soSlotIndexIV OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontProfileInfoEntry 1 }
|
||
|
||
soPportIndexIV OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontProfileInfoEntry 2 }
|
||
|
||
soOntIndexIV OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontProfileInfoEntry 3 }
|
||
|
||
ontProfileSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont sn"
|
||
::= { ontProfileInfoEntry 4 }
|
||
|
||
ontProfileVlanIdxes OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"vlan indexes ont used, such as '100,200,233'. if no vlan used, '-'."
|
||
::= { ontProfileInfoEntry 5 }
|
||
|
||
ontProfileVlanNames OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"vlan names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no vlan used, '-'.
|
||
Name list may too long to show. Suggest use ontProfileVlanIdxes above."
|
||
-- ÿ<><C3BF> name <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><F3B3A4B6><EFBFBD> 127<32><37><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĺܳ<C4BA><DCB3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʹ<EFBFBD><CAB9><EFBFBD>˶<EFBFBD><CBB6><EFBFBD><EFBFBD><EFBFBD>Ŀ<EFBFBD><C4BF><EFBFBD><EFBFBD><EFBFBD>п<EFBFBD><D0BF>ܳ<EFBFBD><DCB3><EFBFBD> 255 <20><>
|
||
-- <20>ֽڡ<D6BD><DAA1><EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD>ֵ<EFBFBD><D6B5><EFBFBD><EFBFBD>ȡ<EFBFBD><C8A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 255 <20>ֽڣ<D6BD><DAA3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ص<EFBFBD><D8B5><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>','<27><><EFBFBD>Ա<EFBFBD>ʾ<EFBFBD><CABE><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD>صģ<D8B5>
|
||
::= { ontProfileInfoEntry 6 }
|
||
|
||
ontProfileUsIdxes OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"us traffic indexes ont used, such as '100,200,233'. if no us traffic used, '-'."
|
||
::= { ontProfileInfoEntry 7 }
|
||
|
||
ontProfileUsNames OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"us traffic names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no us used, '-'.
|
||
Name list may too long to show. Suggest use ontProfileVlanIdxes above."
|
||
-- ÿ<><C3BF> name <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><F3B3A4B6><EFBFBD> 127<32><37><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĺܳ<C4BA><DCB3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʹ<EFBFBD><CAB9><EFBFBD>˶<EFBFBD><CBB6><EFBFBD><EFBFBD><EFBFBD>Ŀ<EFBFBD><C4BF><EFBFBD><EFBFBD><EFBFBD>п<EFBFBD><D0BF>ܳ<EFBFBD><DCB3><EFBFBD> 255 <20><>
|
||
-- <20>ֽڡ<D6BD><DAA1><EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD>ֵ<EFBFBD><D6B5><EFBFBD><EFBFBD>ȡ<EFBFBD><C8A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 255 <20>ֽڣ<D6BD><DAA3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ص<EFBFBD><D8B5><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>','<27><><EFBFBD>Ա<EFBFBD>ʾ<EFBFBD><CABE><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD>صģ<D8B5>
|
||
::= { ontProfileInfoEntry 8 }
|
||
|
||
ontProfileDsIdxes OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ds traffic indexes ont used, such as '100,200,233'. if no ds traffic used, '-'."
|
||
::= { ontProfileInfoEntry 9 }
|
||
|
||
ontProfileDsNames OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ds traffic names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no ds used, '-'.
|
||
Name list may too long to show. Suggest use ontProfileVlanIdxes above."
|
||
-- ÿ<><C3BF> name <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><F3B3A4B6><EFBFBD> 127<32><37><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĺܳ<C4BA><DCB3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʹ<EFBFBD><CAB9><EFBFBD>˶<EFBFBD><CBB6><EFBFBD><EFBFBD><EFBFBD>Ŀ<EFBFBD><C4BF><EFBFBD><EFBFBD><EFBFBD>п<EFBFBD><D0BF>ܳ<EFBFBD><DCB3><EFBFBD> 255 <20><>
|
||
-- <20>ֽڡ<D6BD><DAA1><EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD>ֵ<EFBFBD><D6B5><EFBFBD><EFBFBD>ȡ<EFBFBD><C8A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 255 <20>ֽڣ<D6BD><DAA3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ص<EFBFBD><D8B5><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>','<27><><EFBFBD>Ա<EFBFBD>ʾ<EFBFBD><CABE><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD>صģ<D8B5>
|
||
::= { ontProfileInfoEntry 10 }
|
||
|
||
ontProfileDbaIdxes OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"dba indexes ont used, such as '100,200,233'. if no dba used, '-'."
|
||
::= { ontProfileInfoEntry 11 }
|
||
|
||
ontProfileDbaNames OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"dba names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no dba used, '-'.
|
||
Name list may too long to show. Suggest use ontProfileVlanIdxes above."
|
||
-- ÿ<><C3BF> name <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><F3B3A4B6><EFBFBD> 127<32><37><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĺܳ<C4BA><DCB3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʹ<EFBFBD><CAB9><EFBFBD>˶<EFBFBD><CBB6><EFBFBD><EFBFBD><EFBFBD>Ŀ<EFBFBD><C4BF><EFBFBD><EFBFBD><EFBFBD>п<EFBFBD><D0BF>ܳ<EFBFBD><DCB3><EFBFBD> 255 <20><>
|
||
-- <20>ֽڡ<D6BD><DAA1><EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD>ֵ<EFBFBD><D6B5><EFBFBD><EFBFBD>ȡ<EFBFBD><C8A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 255 <20>ֽڣ<D6BD><DAA3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ص<EFBFBD><D8B5><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>','<27><><EFBFBD>Ա<EFBFBD>ʾ<EFBFBD><CABE><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD>صģ<D8B5>
|
||
::= { ontProfileInfoEntry 12 }
|
||
|
||
ontProfileLineIdx OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"line id ont used."
|
||
::= { ontProfileInfoEntry 13 }
|
||
|
||
ontProfileLineName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"line name ont used."
|
||
::= { ontProfileInfoEntry 14 }
|
||
|
||
ontProfileRuleIdx OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4096)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"rule id ont used."
|
||
::= { ontProfileInfoEntry 15 }
|
||
|
||
ontProfileRuleName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"rule name ont used."
|
||
::= { ontProfileInfoEntry 16 }
|
||
|
||
ontProfileUniqueIdx OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"unique id ont used. if no unique used, '-'"
|
||
::= { ontProfileInfoEntry 17 }
|
||
|
||
ontProfileUniqueName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"unique name ont used. if no unique used, '-'"
|
||
::= { ontProfileInfoEntry 18 }
|
||
|
||
-- ont upgrade status table --------------------------------
|
||
ontUpgradeStatusTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntUpgradeStatusEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont upgrade status table"
|
||
::= { ontInfo 6 }
|
||
|
||
ontUpgradeStatusEntry OBJECT-TYPE
|
||
SYNTAX OntUpgradeStatusEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont upgrade status table"
|
||
INDEX { soSlotIndexV, soPportIndexV, soOntIndexV }
|
||
::= { ontUpgradeStatusTable 1 }
|
||
|
||
OntUpgradeStatusEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexV INTEGER,
|
||
soPportIndexV INTEGER,
|
||
soOntIndexV INTEGER,
|
||
ontUpgradeActiveVer OCTET STRING,
|
||
ontUpgradeInactiveVer OCTET STRING,
|
||
ontUpgradeStatus OCTET STRING
|
||
}
|
||
|
||
soSlotIndexV OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontUpgradeStatusEntry 1 }
|
||
|
||
soPportIndexV OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontUpgradeStatusEntry 2 }
|
||
|
||
soOntIndexV OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontUpgradeStatusEntry 3 }
|
||
|
||
ontUpgradeActiveVer OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont upgrade active version."
|
||
::= { ontUpgradeStatusEntry 4 }
|
||
|
||
ontUpgradeInactiveVer OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont upgrade inactive version."
|
||
::= { ontUpgradeStatusEntry 5 }
|
||
|
||
ontUpgradeStatus OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont upgrade status, such as success, crc error, timeout, offline, 0%-100%."
|
||
::= { ontUpgradeStatusEntry 6 }
|
||
|
||
-- ont statistics table ------------------------------------
|
||
ontStatisticsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntStatisticsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont statistics table"
|
||
::= { ontInfo 7 }
|
||
|
||
ontStatisticsEntry OBJECT-TYPE
|
||
SYNTAX OntStatisticsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont statistics table"
|
||
INDEX { soSlotIndexX, soPportIndexX, soOntIndexX }
|
||
::= { ontStatisticsTable 1 }
|
||
|
||
OntStatisticsEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexX INTEGER,
|
||
soPportIndexX INTEGER,
|
||
soOntIndexX INTEGER,
|
||
ontUsFrames OCTET STRING,
|
||
ontUsBytes OCTET STRING,
|
||
ontDsFrames OCTET STRING,
|
||
ontDsBytes OCTET STRING,
|
||
ontUsRate OCTET STRING,
|
||
ontDsRate OCTET STRING
|
||
}
|
||
|
||
soSlotIndexX OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontStatisticsEntry 1 }
|
||
|
||
soPportIndexX OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontStatisticsEntry 2 }
|
||
|
||
soOntIndexX OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontStatisticsEntry 3 }
|
||
|
||
ontUsFrames OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont upstream frames."
|
||
::= { ontStatisticsEntry 4 }
|
||
|
||
ontUsBytes OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont upstream bytes."
|
||
::= { ontStatisticsEntry 5 }
|
||
|
||
ontDsFrames OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont downstream frames."
|
||
::= { ontStatisticsEntry 6 }
|
||
|
||
ontDsBytes OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont downstream bytes."
|
||
::= { ontStatisticsEntry 7 }
|
||
|
||
ontUsRate OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont upstream rate."
|
||
::= { ontStatisticsEntry 8 }
|
||
|
||
ontDsRate OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont downstream rate."
|
||
::= { ontStatisticsEntry 9 }
|
||
|
||
-- ont utilization table ------------------------------------
|
||
ontUtilizationTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntUtilizationEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont utilization table"
|
||
::= { ontInfo 8 }
|
||
|
||
ontUtilizationEntry OBJECT-TYPE
|
||
SYNTAX OntUtilizationEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont utilization table"
|
||
INDEX { soSlotIndexXII, soPportIndexXII, soOntIndexXII }
|
||
::= { ontUtilizationTable 1 }
|
||
|
||
OntUtilizationEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexXII INTEGER,
|
||
soPportIndexXII INTEGER,
|
||
soOntIndexXII INTEGER,
|
||
soUtilizeTxOctetsRate INTEGER,
|
||
soUtilizeRxOctetsRate INTEGER,
|
||
soUtilizeTxPktsRate INTEGER,
|
||
soUtilizeRxPktsRate INTEGER,
|
||
soUtilizeTxOctets INTEGER,
|
||
soUtilizeRxOctets INTEGER,
|
||
soUtilizeTxPktsError INTEGER,
|
||
soUtilizeRxPktsError INTEGER,
|
||
soUtilizeTxPktsDiscard INTEGER,
|
||
soUtilizeRxPktsDiscard INTEGER,
|
||
soUtilizeTxThroughput INTEGER,
|
||
soUtilizeRxThroughput INTEGER
|
||
}
|
||
|
||
soSlotIndexXII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontUtilizationEntry 1 }
|
||
|
||
soPportIndexXII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontUtilizationEntry 2 }
|
||
|
||
soOntIndexXII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontUtilizationEntry 3 }
|
||
|
||
soUtilizeTxOctetsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont tx octets rate."
|
||
::= { ontUtilizationEntry 4 }
|
||
|
||
soUtilizeRxOctetsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont rx octets rate."
|
||
::= { ontUtilizationEntry 5 }
|
||
|
||
soUtilizeTxPktsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1600000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont tx packets rate(pps)."
|
||
::= { ontUtilizationEntry 6 }
|
||
|
||
soUtilizeRxPktsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1600000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont rx packets rate(pps)."
|
||
::= { ontUtilizationEntry 7 }
|
||
|
||
soUtilizeTxOctets OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1600000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont tx octets in 15 minutes."
|
||
::= { ontUtilizationEntry 8 }
|
||
|
||
soUtilizeRxOctets OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1600000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont rx octets in 15 minutes."
|
||
::= { ontUtilizationEntry 9 }
|
||
|
||
soUtilizeTxPktsError OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port tx packets error in 15 minute."
|
||
::= { ontUtilizationEntry 10 }
|
||
|
||
soUtilizeRxPktsError OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port rx packets error in 15 minute."
|
||
::= { ontUtilizationEntry 11 }
|
||
|
||
soUtilizeTxPktsDiscard OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port tx packets discard in 15 minute."
|
||
::= { ontUtilizationEntry 12 }
|
||
|
||
soUtilizeRxPktsDiscard OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port rx packets discard in 15 minute."
|
||
::= { ontUtilizationEntry 13 }
|
||
|
||
soUtilizeTxThroughput OBJECT-TYPE
|
||
SYNTAX INTEGER(0..100)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port tx throughput."
|
||
::= { ontUtilizationEntry 14 }
|
||
|
||
soUtilizeRxThroughput OBJECT-TYPE
|
||
SYNTAX INTEGER(0..100)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port rx throughput."
|
||
::= { ontUtilizationEntry 15 }
|
||
|
||
-- ont optical software table ----------------------------------
|
||
ontOpticalSwTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntOpticalSwEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont optical software table"
|
||
::= { ontInfo 9 }
|
||
|
||
ontOpticalSwEntry OBJECT-TYPE
|
||
SYNTAX OntOpticalSwEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont optical software table"
|
||
INDEX { soSlotIndexXV, soPportIndexXV, soOntIndexXV }
|
||
::= { ontOpticalSwTable 1 }
|
||
|
||
OntOpticalSwEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexXV INTEGER,
|
||
soPportIndexXV INTEGER,
|
||
soOntIndexXV INTEGER,
|
||
ontVoltageI OCTET STRING,
|
||
ontRXPowerI OCTET STRING,
|
||
ontTXPowerI OCTET STRING,
|
||
ontBiasCurrentI OCTET STRING,
|
||
ontTemperatureI OCTET STRING,
|
||
ontRxCatvPowerI OCTET STRING,
|
||
ontTxCatvPowerI OCTET STRING
|
||
}
|
||
|
||
soSlotIndexXV OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontOpticalSwEntry 1 }
|
||
|
||
soPportIndexXV OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontOpticalSwEntry 2 }
|
||
|
||
soOntIndexXV OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontOpticalSwEntry 3 }
|
||
|
||
ontVoltageI OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont power feed voltage(V)."
|
||
::= { ontOpticalSwEntry 4 }
|
||
|
||
ontRXPowerI OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont received optical power(dBm)."
|
||
::= { ontOpticalSwEntry 5 }
|
||
|
||
ontTXPowerI OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont mean optical launch power(dBm)."
|
||
::= { ontOpticalSwEntry 6 }
|
||
|
||
ontBiasCurrentI OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont laser bias current(uA)."
|
||
::= { ontOpticalSwEntry 7 }
|
||
|
||
ontTemperatureI OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont temperature(<28><>C)."
|
||
::= { ontOpticalSwEntry 8 }
|
||
|
||
ontRxCatvPowerI OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont received catv power(dBm)."
|
||
::= { ontOpticalSwEntry 9 }
|
||
|
||
ontTxCatvPowerI OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont transmitted catv power(dBmV)."
|
||
::= { ontOpticalSwEntry 10 }
|
||
|
||
-- ont mac address table ----------------------------------
|
||
ontMacAddrTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntMacAddrEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont mac address table"
|
||
::= { ontInfo 10 }
|
||
|
||
ontMacAddrEntry OBJECT-TYPE
|
||
SYNTAX OntMacAddrEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont mac address table"
|
||
INDEX { ontMacAddrVid, ontMacAddress}
|
||
::= { ontMacAddrTable 1 }
|
||
|
||
OntMacAddrEntry ::=
|
||
SEQUENCE
|
||
{
|
||
ontMacAddrVid INTEGER,
|
||
ontMacAddress MacAddress,
|
||
ontMacAddrSlot INTEGER,
|
||
ontMacAddrPport INTEGER,
|
||
ontMacAddrOnt INTEGER,
|
||
ontMacAddrSn OCTET STRING,
|
||
ontMacAddrGemU INTEGER,
|
||
ontMacAddrGem INTEGER
|
||
}
|
||
|
||
ontMacAddrVid OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4094)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The vlan id index of ontMacAddrTable, should in <1-4094>."
|
||
::= { ontMacAddrEntry 1 }
|
||
|
||
ontMacAddress OBJECT-TYPE
|
||
SYNTAX MacAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The mac address index of ontMacAddrTable."
|
||
::= { ontMacAddrEntry 2 }
|
||
|
||
ontMacAddrSlot OBJECT-TYPE
|
||
SYNTAX INTEGER(0..11)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The slot of ontMacAddrEntry, should in <0-11>.
|
||
Should in <1-128>."
|
||
::= { ontMacAddrEntry 3 }
|
||
|
||
ontMacAddrPport OBJECT-TYPE
|
||
SYNTAX INTEGER (1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The pon port of ontMacAddrEntry, should in <1-16>"
|
||
::= { ontMacAddrEntry 4 }
|
||
|
||
ontMacAddrOnt OBJECT-TYPE
|
||
SYNTAX INTEGER (1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The ont id of ontMacAddrEntry, should in <1-128>"
|
||
::= { ontMacAddrEntry 5 }
|
||
|
||
ontMacAddrSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The ont sn of ontMacAddrEntry."
|
||
::= { ontMacAddrEntry 6 }
|
||
|
||
ontMacAddrGemU OBJECT-TYPE
|
||
SYNTAX INTEGER (0..1024)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The ont user gem of ontMacAddrEntry, should in <1-1024>
|
||
0: none
|
||
1-1024: valid"
|
||
::= { ontMacAddrEntry 7 }
|
||
|
||
ontMacAddrGem OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4095)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The ont gem of ontMacAddrEntry, should in <0-4095>"
|
||
::= { ontMacAddrEntry 8 }
|
||
|
||
|
||
-- ont ethernet port infomation ----------------------------
|
||
ontEthPortInfo OBJECT IDENTIFIER ::= { statusOnt 2 }
|
||
|
||
-- 2.4.2.1 ontEthportStateTable
|
||
-- 2.4.2.2 ontEthportStatisRecTable
|
||
-- 2.4.2.3 ontEthportStatisSentTable
|
||
-- 2.4.2.4 ontEthportUtilizationTable
|
||
|
||
-- ont ethport state table --------------------------------
|
||
ontEthportStateTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntEthportStateEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont ethport state table"
|
||
::= { ontEthPortInfo 1 }
|
||
|
||
ontEthportStateEntry OBJECT-TYPE
|
||
SYNTAX OntEthportStateEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont ethport state table"
|
||
INDEX { soSlotIndexVI, soPportIndexVI, soOntIndexVI, soOntEthportIndex }
|
||
::= { ontEthportStateTable 1 }
|
||
|
||
OntEthportStateEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexVI INTEGER,
|
||
soPportIndexVI INTEGER,
|
||
soOntIndexVI INTEGER,
|
||
soOntEthportIndex INTEGER,
|
||
ontEthportAdminStatus OCTET STRING,
|
||
ontEthportConnectState OCTET STRING,
|
||
ontEthportPortSpeed OCTET STRING
|
||
}
|
||
|
||
soSlotIndexVI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontEthportStateEntry 1 }
|
||
|
||
soPportIndexVI OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontEthportStateEntry 2 }
|
||
|
||
soOntIndexVI OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontEthportStateEntry 3 }
|
||
|
||
soOntEthportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont ethernet port, the 4th index of this table.
|
||
range <1-n> is determined by ont type, the max n is 2.4."
|
||
::= { ontEthportStateEntry 4 }
|
||
|
||
ontEthportAdminStatus OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont ethernet port admin status:
|
||
0 enable
|
||
1 disable."
|
||
::= { ontEthportStateEntry 5 }
|
||
|
||
ontEthportConnectState OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont ethernet port connect state."
|
||
::= { ontEthportStateEntry 6 }
|
||
|
||
ontEthportPortSpeed OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont ethernet port speed."
|
||
-- 1<><31>2<EFBFBD><32>3 <20>ֱ<EFBFBD><D6B1><EFBFBD>ʮ<EFBFBD>װ<EFBFBD><D7B0><EFBFBD>ǧ<EFBFBD><C7A7>ȫ˫<C8AB><CBAB>
|
||
-- 17,18,19 <20>ֱ<EFBFBD><D6B1><EFBFBD>ʮ<EFBFBD>װ<EFBFBD><D7B0><EFBFBD>ǧ<EFBFBD>װ<EFBFBD>˫<EFBFBD><CBAB>
|
||
::= { ontEthportStateEntry 7 }
|
||
|
||
-- ont etherport statistics receive table ----------------------
|
||
ontEthportStatisRecTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntEthportStatisRecEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont etherport statistics receive table"
|
||
::= { ontEthPortInfo 2 }
|
||
|
||
ontEthportStatisRecEntry OBJECT-TYPE
|
||
SYNTAX OntEthportStatisRecEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont etherport statistics receive table"
|
||
INDEX { soSlotIndexVII, soPportIndexVII, soOntIndexVII, soOntEthportIndexI }
|
||
::= { ontEthportStatisRecTable 1 }
|
||
|
||
OntEthportStatisRecEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexVII INTEGER,
|
||
soPportIndexVII INTEGER,
|
||
soOntIndexVII INTEGER,
|
||
soOntEthportIndexI INTEGER,
|
||
ontEthportRecFrames INTEGER,
|
||
ontEthportRecUniFrames INTEGER,
|
||
ontEthportRecMulFrames INTEGER,
|
||
ontEthportRecBroFrames INTEGER,
|
||
ontEthportRec64Frames INTEGER,
|
||
ontEthportRec65Frames INTEGER,
|
||
ontEthportRec128Frames INTEGER,
|
||
ontEthportRec256Frames INTEGER,
|
||
ontEthportRec512Frames INTEGER,
|
||
ontEthportRec1024Frames INTEGER,
|
||
ontEthportRecUndFrames INTEGER,
|
||
ontEthportRecOveFrames INTEGER,
|
||
ontEthportRecFragments INTEGER,
|
||
ontEthportRecJabbers INTEGER,
|
||
ontEthportRecFcsFrames INTEGER,
|
||
ontEthportDisFrames INTEGER,
|
||
ontEthportRecAliFrames INTEGER,
|
||
ontEthportMacRecFrames INTEGER,
|
||
ontEthportPppFrames INTEGER,
|
||
ontEthportBufReceive INTEGER,
|
||
ontEthportRecBytes INTEGER
|
||
}
|
||
|
||
soSlotIndexVII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontEthportStatisRecEntry 1 }
|
||
|
||
soPportIndexVII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontEthportStatisRecEntry 2 }
|
||
|
||
soOntIndexVII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontEthportStatisRecEntry 3 }
|
||
|
||
soOntEthportIndexI OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont ethernet port, the 4th index of this table.
|
||
range <1-n> is determined by ont type, the max n is 2.4."
|
||
::= { ontEthportStatisRecEntry 4 }
|
||
|
||
ontEthportRecFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received frames"
|
||
::= { ontEthportStatisRecEntry 5 }
|
||
|
||
ontEthportRecUniFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received unicast frames"
|
||
::= { ontEthportStatisRecEntry 6 }
|
||
|
||
ontEthportRecMulFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received multicast frames"
|
||
::= { ontEthportStatisRecEntry 7 }
|
||
|
||
ontEthportRecBroFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received broadcast frames"
|
||
::= { ontEthportStatisRecEntry 8 }
|
||
|
||
ontEthportRec64Frames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received 64-byte frames"
|
||
::= { ontEthportStatisRecEntry 9 }
|
||
|
||
ontEthportRec65Frames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received 65~127-byte frames"
|
||
::= { ontEthportStatisRecEntry 10 }
|
||
|
||
ontEthportRec128Frames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received 128~255-byte frames"
|
||
::= { ontEthportStatisRecEntry 11 }
|
||
|
||
ontEthportRec256Frames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received 256~511-byte frames"
|
||
::= { ontEthportStatisRecEntry 12 }
|
||
|
||
ontEthportRec512Frames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received 512~1023-byte frames"
|
||
::= { ontEthportStatisRecEntry 13 }
|
||
|
||
ontEthportRec1024Frames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received 1024~1518-byte frames"
|
||
::= { ontEthportStatisRecEntry 14 }
|
||
|
||
ontEthportRecUndFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received undersize frames"
|
||
::= { ontEthportStatisRecEntry 15 }
|
||
|
||
ontEthportRecOveFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received oversize frames"
|
||
::= { ontEthportStatisRecEntry 16 }
|
||
|
||
ontEthportRecFragments OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received fragments"
|
||
::= { ontEthportStatisRecEntry 17 }
|
||
|
||
ontEthportRecJabbers OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received jabbers"
|
||
::= { ontEthportStatisRecEntry 18 }
|
||
|
||
ontEthportRecFcsFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received FCS error frames"
|
||
::= { ontEthportStatisRecEntry 19 }
|
||
|
||
ontEthportDisFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Discard frames"
|
||
::= { ontEthportStatisRecEntry 20 }
|
||
|
||
ontEthportRecAliFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received alignment error frames"
|
||
::= { ontEthportStatisRecEntry 21 }
|
||
|
||
ontEthportMacRecFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"MAC sub-layer received error frames"
|
||
::= { ontEthportStatisRecEntry 22 }
|
||
|
||
ontEthportPppFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"PPPOE filtered frames"
|
||
::= { ontEthportStatisRecEntry 23 }
|
||
|
||
ontEthportBufReceive OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Buffer overflows on receive"
|
||
::= { ontEthportStatisRecEntry 24 }
|
||
|
||
ontEthportRecBytes OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Received bytes"
|
||
::= { ontEthportStatisRecEntry 25 }
|
||
|
||
-- ont etherport statistics sent table ----------------------
|
||
ontEthportStatisSentTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntEthportStatisSentEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont etherport statistics sent table"
|
||
::= { ontEthPortInfo 3 }
|
||
|
||
ontEthportStatisSentEntry OBJECT-TYPE
|
||
SYNTAX OntEthportStatisSentEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont etherport statistics sent table"
|
||
INDEX { soSlotIndexXI, soPportIndexXI, soOntIndexXI, soOntEthportIndexIII }
|
||
::= { ontEthportStatisSentTable 1 }
|
||
|
||
OntEthportStatisSentEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexXI INTEGER,
|
||
soPportIndexXI INTEGER,
|
||
soOntIndexXI INTEGER,
|
||
soOntEthportIndexIII INTEGER,
|
||
ontEthportSenFrames INTEGER,
|
||
ontEthportSenUniFrames INTEGER,
|
||
ontEthportSenMulFrames INTEGER,
|
||
ontEthportSenBroFrames INTEGER,
|
||
ontEthportCarFrames INTEGER,
|
||
ontEthportSqeMessages INTEGER,
|
||
ontEthportSenSinFrames INTEGER,
|
||
ontEthportSenMulColFrames INTEGER,
|
||
ontEthportSenExcFrames INTEGER,
|
||
ontEthportLatFrames INTEGER,
|
||
ontEthportMacSenFrames INTEGER,
|
||
ontEthportBufTransmit INTEGER,
|
||
ontEthportSentBytes INTEGER
|
||
}
|
||
|
||
soSlotIndexXI OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontEthportStatisSentEntry 1 }
|
||
|
||
soPportIndexXI OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontEthportStatisSentEntry 2 }
|
||
|
||
soOntIndexXI OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontEthportStatisSentEntry 3 }
|
||
|
||
soOntEthportIndexIII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont ethernet port, the 4th index of this table.
|
||
range <1-n> is determined by ont type, the max n is 2.4."
|
||
::= { ontEthportStatisSentEntry 4 }
|
||
|
||
ontEthportSenFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sent frames"
|
||
::= { ontEthportStatisSentEntry 5 }
|
||
|
||
ontEthportSenUniFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sent unicast frames"
|
||
::= { ontEthportStatisSentEntry 6 }
|
||
|
||
ontEthportSenMulFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sent multicast frames"
|
||
::= { ontEthportStatisSentEntry 7 }
|
||
|
||
ontEthportSenBroFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sent broadcast frames"
|
||
::= { ontEthportStatisSentEntry 8 }
|
||
|
||
ontEthportCarFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Carrier sense error frames"
|
||
::= { ontEthportStatisSentEntry 9 }
|
||
|
||
ontEthportSqeMessages OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"SQE test error messages"
|
||
::= { ontEthportStatisSentEntry 10 }
|
||
|
||
ontEthportSenSinFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sent single collision frames"
|
||
::= { ontEthportStatisSentEntry 11 }
|
||
|
||
ontEthportSenMulColFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sent multiple collision frames"
|
||
::= { ontEthportStatisSentEntry 12 }
|
||
|
||
ontEthportSenExcFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sent excessive collision frames"
|
||
::= { ontEthportStatisSentEntry 13 }
|
||
|
||
ontEthportLatFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Late collision frames"
|
||
::= { ontEthportStatisSentEntry 14 }
|
||
|
||
ontEthportMacSenFrames OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"MAC sub-layer sent error frames"
|
||
::= { ontEthportStatisSentEntry 15 }
|
||
|
||
ontEthportBufTransmit OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Buffer overflows on transmit"
|
||
::= { ontEthportStatisSentEntry 16 }
|
||
|
||
ontEthportSentBytes OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Sent bytes "
|
||
::= { ontEthportStatisSentEntry 17 }
|
||
|
||
-- ont ethport utilization table ------------------------
|
||
ontEthportUtilizationTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntEthportUtilizationEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont ethport multicast mac table"
|
||
::= { ontEthPortInfo 4 }
|
||
|
||
ontEthportUtilizationEntry OBJECT-TYPE
|
||
SYNTAX OntEthportUtilizationEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont ethport multicast mac table"
|
||
INDEX { soSlotIndexVIII, soPportIndexVIII, soOntIndexVIII, soOntEthportIndexII }
|
||
::= { ontEthportUtilizationTable 1 }
|
||
|
||
OntEthportUtilizationEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexVIII INTEGER,
|
||
soPportIndexVIII INTEGER,
|
||
soOntIndexVIII INTEGER,
|
||
soOntEthportIndexII INTEGER,
|
||
soEportUtilizeTxOctetsRate INTEGER,
|
||
soEportUtilizeRxOctetsRate INTEGER,
|
||
soEportUtilizeTxPktsRate INTEGER,
|
||
soEportUtilizeRxPktsRate INTEGER,
|
||
soEportUtilizeTxOctets INTEGER,
|
||
soEportUtilizeRxOctets INTEGER,
|
||
soEportUtilizeTxPktsError INTEGER,
|
||
soEportUtilizeRxPktsError INTEGER,
|
||
soEportUtilizeTxPktsDiscard INTEGER,
|
||
soEportUtilizeRxPktsDiscard INTEGER
|
||
}
|
||
|
||
soSlotIndexVIII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontEthportUtilizationEntry 1 }
|
||
|
||
soPportIndexVIII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontEthportUtilizationEntry 2 }
|
||
|
||
soOntIndexVIII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontEthportUtilizationEntry 3 }
|
||
|
||
soOntEthportIndexII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..8)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont ethernet port, the 4th index of this table.
|
||
range <1-n> is determined by ont type, the max n is 2.4."
|
||
::= { ontEthportUtilizationEntry 4 }
|
||
|
||
soEportUtilizeTxOctetsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont tx octets rate."
|
||
::= { ontEthportUtilizationEntry 5 }
|
||
|
||
soEportUtilizeRxOctetsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont rx octets rate."
|
||
::= { ontEthportUtilizationEntry 6 }
|
||
|
||
soEportUtilizeTxPktsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1600000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont tx packets rate(pps)."
|
||
::= { ontEthportUtilizationEntry 7 }
|
||
|
||
soEportUtilizeRxPktsRate OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1600000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont rx packets rate(pps)."
|
||
::= { ontEthportUtilizationEntry 8 }
|
||
|
||
soEportUtilizeTxOctets OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1600000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont tx octets in 15 minutes."
|
||
::= { ontEthportUtilizationEntry 9 }
|
||
|
||
soEportUtilizeRxOctets OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1600000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont rx octets in 15 minutes."
|
||
::= { ontEthportUtilizationEntry 10 }
|
||
|
||
soEportUtilizeTxPktsError OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port tx packets error in 15 minute."
|
||
::= { ontEthportUtilizationEntry 11 }
|
||
|
||
soEportUtilizeRxPktsError OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port rx packets error in 15 minute."
|
||
::= { ontEthportUtilizationEntry 12 }
|
||
|
||
soEportUtilizeTxPktsDiscard OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port tx packets discard in 15 minute."
|
||
::= { ontEthportUtilizationEntry 13 }
|
||
|
||
soEportUtilizeRxPktsDiscard OBJECT-TYPE
|
||
SYNTAX INTEGER(0..10000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port rx packets discard in 15 minute."
|
||
::= { ontEthportUtilizationEntry 14 }
|
||
|
||
|
||
-- ont gemport infomation ----------------------------------
|
||
ontGemPortInfo OBJECT IDENTIFIER ::= { statusOnt 3 }
|
||
|
||
-- 2.4.3.1 ontGemportStatisticsTable
|
||
|
||
-- ont gemport statistics table ----------------------------
|
||
ontGemportStatisticsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntGemportStatisticsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont gemport statistics table"
|
||
::= { ontGemPortInfo 1 }
|
||
|
||
ontGemportStatisticsEntry OBJECT-TYPE
|
||
SYNTAX OntGemportStatisticsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont gemport statistics table"
|
||
INDEX { soSlotIndexIX, soPportIndexIX, soOntIndexIX, ontGemportStaFrameType, ontGemportStaIndex }
|
||
::= { ontGemportStatisticsTable 1 }
|
||
|
||
OntGemportStatisticsEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexIX INTEGER,
|
||
soPportIndexIX INTEGER,
|
||
soOntIndexIX INTEGER,
|
||
ontGemportStaFrameType INTEGER,
|
||
ontGemportStaIndex INTEGER,
|
||
ontGemportStaUpdateData INTEGER,
|
||
ontGemportLostFrame INTEGER,
|
||
ontGemportRecFrame INTEGER,
|
||
ontGemportRecBlock INTEGER,
|
||
ontGemportSentFrame INTEGER,
|
||
ontGemportSentBlock INTEGER
|
||
}
|
||
|
||
soSlotIndexIX OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontGemportStatisticsEntry 1 }
|
||
|
||
soPportIndexIX OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontGemportStatisticsEntry 2 }
|
||
|
||
soOntIndexIX OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontGemportStatisticsEntry 3 }
|
||
|
||
ontGemportStaFrameType OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontGemportStaFrameTpte:
|
||
0----unicast
|
||
1----multicast
|
||
2----broadcast"
|
||
::= { ontGemportStatisticsEntry 4 }
|
||
|
||
ontGemportStaIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..24)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontGemportStaIndex:
|
||
The index should be inputed with <1-24>"
|
||
::= { ontGemportStatisticsEntry 5 }
|
||
|
||
ontGemportStaUpdateData OBJECT-TYPE
|
||
SYNTAX INTEGER(0..2)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Set ontGemportStaUpdateData=2 to update data of the entry.
|
||
then you can read this node. still 2 means update incomplete,
|
||
0 means update successfully, 1 means update failed.
|
||
If you don't update the data of the entry, the value you get
|
||
maybe not newest."
|
||
::= { ontGemportStatisticsEntry 6 }
|
||
|
||
ontGemportLostFrame OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontGemportLostFrame"
|
||
::= { ontGemportStatisticsEntry 7 }
|
||
|
||
ontGemportRecFrame OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontGemportRecFrame"
|
||
::= { ontGemportStatisticsEntry 8 }
|
||
|
||
ontGemportRecBlock OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontGemportRecBlock"
|
||
::= { ontGemportStatisticsEntry 9 }
|
||
|
||
ontGemportSentFrame OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontGemportSentFrame"
|
||
::= { ontGemportStatisticsEntry 10 }
|
||
|
||
ontGemportSentBlock OBJECT-TYPE
|
||
SYNTAX INTEGER (0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontGemportSentBlock"
|
||
::= { ontGemportStatisticsEntry 11 }
|
||
|
||
-- ont wan infomation --------------------------------------
|
||
ontWanInfo OBJECT IDENTIFIER ::= { statusOnt 4 }
|
||
|
||
-- 2.4.4.1 ontWanInfoTable
|
||
|
||
-- ont wan infomation table --------------------------------
|
||
ontWanInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntWanInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont wan infomation table"
|
||
::= { ontWanInfo 1 }
|
||
|
||
ontWanInfoEntry OBJECT-TYPE
|
||
SYNTAX OntWanInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont wan infomation table"
|
||
INDEX { soSlotIndexXIII, soPportIndexXIII, soOntIndexXIII, ontWanIndex}
|
||
::= { ontWanInfoTable 1 }
|
||
|
||
OntWanInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexXIII INTEGER,
|
||
soPportIndexXIII INTEGER,
|
||
soOntIndexXIII INTEGER,
|
||
ontWanIndex INTEGER,
|
||
ontWanServerType OCTET STRING,
|
||
ontWanIp IpAddress,
|
||
ontWanMask IpAddress,
|
||
ontWanGateway IpAddress,
|
||
ontWanPriDns IpAddress,
|
||
ontWanSecDns IpAddress
|
||
}
|
||
|
||
soSlotIndexXIII OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontWanInfoEntry 1 }
|
||
|
||
soPportIndexXIII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontWanInfoEntry 2 }
|
||
|
||
soOntIndexXIII OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontWanInfoEntry 3 }
|
||
|
||
ontWanIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..4)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontWanIndex:
|
||
The index should be inputed with <1-4>"
|
||
::= { ontWanInfoEntry 4 }
|
||
|
||
ontWanServerType OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont wan server type."
|
||
-- ҵ<><D2B5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(IPTV TR069 INTERNET VOIP<49><50><EFBFBD><EFBFBD><EFBFBD>ϣ<EFBFBD><CFA3><EFBFBD>IPTV_TR069_INTERNET_VOIP)
|
||
::= { ontWanInfoEntry 5 }
|
||
|
||
ontWanIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontGemportLostFrame"
|
||
::= { ontWanInfoEntry 6 }
|
||
|
||
ontWanMask OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontGemportRecFrame"
|
||
::= { ontWanInfoEntry 7 }
|
||
|
||
ontWanGateway OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontGemportRecBlock"
|
||
::= { ontWanInfoEntry 8 }
|
||
|
||
ontWanPriDns OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontWanInfoEntry"
|
||
::= { ontWanInfoEntry 9 }
|
||
|
||
ontWanSecDns OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontGemportSentBlock"
|
||
::= { ontWanInfoEntry 10 }
|
||
|
||
-- ont pots infomation --------------------------------------
|
||
ontPotsInfo OBJECT IDENTIFIER ::= { statusOnt 5 }
|
||
|
||
-- 2.4.5.1 ontPotsInfoTable
|
||
|
||
-- ont pots infomation table --------------------------------
|
||
ontPotsInfoTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF OntPotsInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont pots infomation table"
|
||
::= { ontPotsInfo 1 }
|
||
|
||
ontPotsInfoEntry OBJECT-TYPE
|
||
SYNTAX OntPotsInfoEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of ont pots infomation table"
|
||
INDEX { soSlotIndexXIV, soPportIndexXIV, soOntIndexXIV, ontPotsIndex}
|
||
::= { ontPotsInfoTable 1 }
|
||
|
||
OntPotsInfoEntry ::=
|
||
SEQUENCE
|
||
{
|
||
soSlotIndexXIV INTEGER,
|
||
soPportIndexXIV INTEGER,
|
||
soOntIndexXIV INTEGER,
|
||
ontPotsIndex INTEGER,
|
||
ontPotsStatus INTEGER
|
||
}
|
||
|
||
soSlotIndexXIV OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { ontPotsInfoEntry 1 }
|
||
|
||
soPportIndexXIV OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of pon port, should in <1-16>."
|
||
::= { ontPotsInfoEntry 2 }
|
||
|
||
soOntIndexXIV OBJECT-TYPE
|
||
SYNTAX INTEGER(1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of ont, the 3rd index of this table.
|
||
Should in <1-128>."
|
||
::= { ontPotsInfoEntry 3 }
|
||
|
||
ontPotsIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..2)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ontWanIndex:
|
||
The index should be inputed with <1-2>"
|
||
::= { ontPotsInfoEntry 4 }
|
||
|
||
ontPotsStatus OBJECT-TYPE
|
||
SYNTAX INTEGER(0..14)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"typedef enum tag_M_ONT_POTS_STATUS
|
||
{
|
||
/* 0 */ POTS_STATUS_INIT = 0, /* None/initial */
|
||
/* 1 */ POTS_STATUS_REGISTERED, /* Registered */
|
||
/* 2 */ POTS_STATUS_IN_SESSION, /* In session */
|
||
/* 3 */ POTS_STATUS_REG_ICMP_ERR, /* Failed registration <20>Cicmp error */
|
||
/* 4 */ POTS_STATUS_REG_TCP_FAIL, /* Failed registration <20>Cfailed tcp */
|
||
/* 5 */ POTS_STATUS_REG_TMOUT, /* Failed registration <20>Ctimeout */
|
||
/* 6 */ POTS_STATUS_REG_AUTH_FAIL, /* Failed registration - failed authentication */
|
||
/* 7 */ POTS_STATUS_REG_SRV_FAIL, /* Failed registration - server fail code */
|
||
/* 8 */ POTS_STATUS_INV_ICMP_ERR, /* Failed invite <20>Cicmp error */
|
||
/* 9 */ POTS_STATUS_INV_TCP_FAIL, /* Failed invite <20>Cfailed tcp */
|
||
/* 10 */ POTS_STATUS_INV_AUTH_FAIL, /* Failed invite <20>Cfailed authentication */
|
||
/* 11 */ POTS_STATUS_INV_TMOUT, /* Failed invite <20>Ctimeout */
|
||
/* 12 */ POTS_STATUS_INV_SRV_FAIL, /* Failed invite <20>Cserver fail code */
|
||
/* 13 */ POTS_STATUS_PORT_NOT_CFG, /* Port not configured */
|
||
/* 14 */ POTS_STATUS_CFG_DONE, /* Config done */
|
||
POTS_STATUS_SUM
|
||
}M_ONT_POTS_STATUS;"
|
||
::= { ontPotsInfoEntry 5 }
|
||
|
||
--------------------------------------------------------------
|
||
------------------ 2.5. status trap ------------------------
|
||
--------------------------------------------------------------
|
||
-- 2.5.1. deviceTrap
|
||
-- 2.5.2. slotTrap
|
||
-- 2.5.3. portTrap
|
||
-- 2.5.4. ontTrap
|
||
-- 2.5.5. ontPortTrap
|
||
-- 2.5.6. trapInfo
|
||
-- 2.5.7. trapSetThreshold
|
||
-- 2.5.8. trapClearThreshold
|
||
|
||
|
||
------ deviceTrap ------------------------------------------
|
||
deviceTrap OBJECT IDENTIFIER ::= { statusTrap 1 }
|
||
|
||
oltSwitchOverTrap NOTIFICATION-TYPE
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt contrl-board switchover trap."
|
||
--olt<6C><74><EFBFBD>ذ<EFBFBD><D8B0><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
::= { deviceTrap 1 }
|
||
|
||
oltFanStatusTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapExtraInfo }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt fan status change trap.
|
||
gponTrapExtraInfo:
|
||
1 stop
|
||
2 start
|
||
3 remove
|
||
4 insert"
|
||
--olt<6C><74><EFBFBD><EFBFBD>״̬trap
|
||
::= { deviceTrap 2 }
|
||
|
||
oltPowerStatusTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapExtraInfo }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt power status trap."
|
||
--olt<6C><74>Դ״̬trap true
|
||
::= { deviceTrap 3 }
|
||
|
||
oltTemperatureTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapStatus, gponTrapExtraInfo }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt switch chip temperature trap.
|
||
gponTrapExtraInfo:
|
||
1 low
|
||
2 high"
|
||
--olt <20><><EFBFBD><EFBFBD>оƬ<D0BE>¶<EFBFBD>trap true
|
||
::= { deviceTrap 4 }
|
||
|
||
oltPonTemperatureTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapStatus, gponTrapExtraInfo }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt pon chip temperature trap.
|
||
gponTrapExtraInfo:
|
||
1 low
|
||
2 high"
|
||
--olt pon оƬ<D0BE>¶<EFBFBD>trap true
|
||
::= { deviceTrap 5 }
|
||
|
||
unitOfflineAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"unit offline alarm trap."
|
||
--olt offline <20>澯 true
|
||
::= { deviceTrap 6 }
|
||
|
||
oltDgTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"unit dying gasp trap."
|
||
--olt <20><><EFBFBD><EFBFBD><EFBFBD>澯
|
||
::= { deviceTrap 7 }
|
||
|
||
edfaTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapExtraInfo, gponTrapSfpPerformanceStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa trap.
|
||
gponTrapExtraInfo:
|
||
1 Optical Input Power 1
|
||
2 Optical Input Power 2
|
||
3 Optical Output Power
|
||
4 Pump 1 Bias Current
|
||
5 Pump 1 Pump Temperature
|
||
6 Pump 1 Pump Tec
|
||
7 Pump 2 Bias Current
|
||
8 Pump 2 Pump Temperature
|
||
9 Pump 2 Pump Tec
|
||
10 DC Voltage
|
||
11 Internal Temperature"
|
||
::= { deviceTrap 8 }
|
||
|
||
oltDooralmTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt door alarm trap."
|
||
--olt <20><><EFBFBD><EFBFBD><EFBFBD>澯
|
||
::= { deviceTrap 9 }
|
||
|
||
warningPortAlarmTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapWarnPortIndex, gponTrapWarnPortAlarm }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Warning port alarm."
|
||
--olt <20>澯<EFBFBD>˿ڸ澯
|
||
::= { deviceTrap 10 }
|
||
|
||
------ slotTrap --------------------------------------------
|
||
slotTrap OBJECT IDENTIFIER ::= { statusTrap 2 }
|
||
|
||
oltBoardStatusTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapExtraInfo }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt board status trap."
|
||
--olt <20><>״̬<D7B4>ı䣨<C4B1><E4A3A8><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>أ<EFBFBD>ҵ<EFBFBD><D2B5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>룬<EFBFBD>Ƴ<EFBFBD><C6B3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ӣ<EFBFBD>
|
||
::= { slotTrap 1 }
|
||
|
||
------ portTrap ------------------------------------------
|
||
portTrap OBJECT IDENTIFIER ::= { statusTrap 3 }
|
||
|
||
oltPortRingTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt port ring trap."
|
||
--olt<6C>˿ڻ<CBBF>·trap
|
||
::= { portTrap 1 }
|
||
|
||
oltPortSdTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt port sd trap."
|
||
--olt<6C>˿<EFBFBD> sd trap true
|
||
::= { portTrap 2 }
|
||
|
||
oltPportLOSTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt pon port LOS trap. "
|
||
--olt pon <20>˿<EFBFBD> LOS trap true
|
||
::= { portTrap 3 }
|
||
|
||
oltPortSfpTcrossTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapStatus, gponTrapExtraInfo }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt sfp threshold crossing alert trap.
|
||
gponTrapExtraInfo:
|
||
1 recieve high
|
||
2 recieve low
|
||
3 send high
|
||
4 send low"
|
||
--olt <20><>ģ<EFBFBD><C4A3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Խ<EFBFBD>澯 trap
|
||
::= { portTrap 4 }
|
||
|
||
oltPortSfpUnplugTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus, gponTrapSn }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt pon port sfp unplug trap. "
|
||
--olt pon <20>˿ڹ<CBBF>ģ<EFBFBD>鱻<EFBFBD>γ<EFBFBD> trap true
|
||
::= { portTrap 5 }
|
||
|
||
oltPortUdldTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapExtraInfo }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"UniDirectional Link Detection trap.
|
||
gponTrapExtraInfo:
|
||
1 Undetermined
|
||
2 Unidirectional
|
||
3 Bidirectional"
|
||
--olt <20>˿ڵ<CBBF><DAB5><EFBFBD><EFBFBD><EFBFBD>·<EFBFBD><C2B7><EFBFBD><EFBFBD> trap true
|
||
-- 1 δȷ<CEB4><C8B7> 2 <20><>ͨ 3 ˫ͨ
|
||
::= { portTrap 6 }
|
||
|
||
oltPportLOFTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt pon port LOF trap. "
|
||
--olt pon <20>˿<EFBFBD> LOF trap true
|
||
::= { portTrap 7 }
|
||
|
||
oltPortCRCTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt port CRC trap. "
|
||
--olt <20>˿<EFBFBD> CRC trap
|
||
::= { portTrap 8 }
|
||
|
||
oltPportRegOverTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"olt pon port register over trap. "
|
||
--olt pon <20>˿<EFBFBD>ע<EFBFBD><D7A2><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Խ<EFBFBD><D4BD> trap
|
||
::= { portTrap 9 }
|
||
|
||
------ ontTrap --------------------------------------------
|
||
ontTrap OBJECT IDENTIFIER ::= { statusTrap 4 }
|
||
|
||
ontOnlineStatusTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapStatus, gponTrapSn, gponTrapLoid }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont online status trap."
|
||
--ont<6E><74><EFBFBD><EFBFBD><EFBFBD><EFBFBD>״̬trap true
|
||
::= { ontTrap 1 }
|
||
|
||
ont9843Trap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapExtraInfo }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont 984.3 warning trap.
|
||
gponTrapExtraInfo: warning type:
|
||
1 LOSi
|
||
2 LOFi
|
||
3 DOWi
|
||
4 SFi
|
||
5 SDi
|
||
6 LCDGi
|
||
7 RDIi
|
||
8 SUFi
|
||
9 DFi
|
||
10 LOAi
|
||
11 LOKi
|
||
12 TIWi
|
||
13 DGi
|
||
14 LOAMi
|
||
15 MEMi
|
||
16 MISi
|
||
17 PEEi
|
||
18 ERRi
|
||
19 REIi"
|
||
--ont 984.3 <20>澯 trap true
|
||
::= { ontTrap 2 }
|
||
|
||
ontRogueTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapStatus, gponTrapExtraInfo }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Rogue ont trap.
|
||
gponTrapExtraInfo: rogue type:
|
||
1 continuous
|
||
2 intermittent "
|
||
--<2D><>åont trap<61><70><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͼ<EFBFBD>Ъ<EFBFBD>Է<EFBFBD><D4B7>⣩
|
||
::= { ontTrap 3 }
|
||
|
||
ontAuthFailTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapSn }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont authentication failure trap."
|
||
--ont<6E><74>֤ʧ<D6A4><CAA7>trap
|
||
::= { ontTrap 4 }
|
||
|
||
ontSfpTcrossTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapStatus, gponTrapExtraInfo }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont sfp threshold crossing alert trap.
|
||
gponTrapExtraInfo:
|
||
1 recieve high
|
||
2 recieve low
|
||
3 send high
|
||
4 send low"
|
||
--olt <20><>ģ<EFBFBD><C4A3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Խ<EFBFBD>澯 trap
|
||
::= { ontTrap 5 }
|
||
|
||
------ ontPortTrap ------------------------------------------
|
||
ontPortTrap OBJECT IDENTIFIER ::= { statusTrap 5 }
|
||
|
||
ontEthPortStatusTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapOntEthportId, gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont ethernet port status trap."
|
||
--ont<6E><74>̫<EFBFBD><CCAB><EFBFBD>˿<EFBFBD>״̬trap
|
||
::= { ontPortTrap 1 }
|
||
|
||
ontEthPortRingTrap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapOntEthportId, gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont ethernet port ring trap."
|
||
--ont<6E><74>̫<EFBFBD><CCAB><EFBFBD>˿ڻ<CBBF>·trap
|
||
::= { ontPortTrap 2 }
|
||
|
||
ontPotsH248Trap NOTIFICATION-TYPE
|
||
OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapExtraId, gponTrapStatus }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont pots h248 link trap.
|
||
gponTrapExtraId: ont pots number"
|
||
--ont<6E><74><EFBFBD><EFBFBD><EFBFBD>˿<EFBFBD><CBBF><EFBFBD>·<EFBFBD>澯trap
|
||
::= { ontPortTrap 3 }
|
||
|
||
|
||
------ trapInfo --------------------------------------
|
||
trapInfo OBJECT IDENTIFIER ::= { statusTrap 6 }
|
||
|
||
gponTrapSlotId OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"slot-id/fan-id/power-id in trap "
|
||
::= { trapInfo 1 }
|
||
|
||
gponTrapPortId OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"port id in trap "
|
||
::= { trapInfo 2 }
|
||
|
||
gponTrapOntId OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont id in trap "
|
||
::= { trapInfo 3 }
|
||
|
||
gponTrapOntEthportId OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont ethernet port id in trap "
|
||
::= { trapInfo 4 }
|
||
|
||
gponTrapExtraId OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"other id in trap, etc."
|
||
::= { trapInfo 5 }
|
||
|
||
gponTrapStatus OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"1 alarm/linkdown/offline/open box
|
||
0 clear/linkup/online/close box"
|
||
::= { trapInfo 6 }
|
||
|
||
gponTrapExtraInfo OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"trap extra infomation"
|
||
::= { trapInfo 7 }
|
||
|
||
gponTrapSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sn use for trap."
|
||
::= { trapInfo 8 }
|
||
|
||
gponTrapLoid OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"sn use for trap."
|
||
::= { trapInfo 9 }
|
||
|
||
gponTrapSfpPerformanceStatus OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"0 normal
|
||
1 lolo
|
||
2 lo
|
||
3 hi
|
||
4 hihi"
|
||
::= { trapInfo 10 }
|
||
|
||
gponTrapWarnPortIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Warn index 1 to 8"
|
||
::= { trapInfo 11 }
|
||
|
||
gponTrapWarnPortAlarm OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS accessible-for-notify
|
||
STATUS current
|
||
DESCRIPTION
|
||
"0 clear
|
||
1 warn"
|
||
::= { trapInfo 12 }
|
||
|
||
------ trapSetThreshold --------------------------------------
|
||
trapSetThreshold OBJECT IDENTIFIER ::= { statusTrap 7 }
|
||
|
||
thresholdTemperatureHigh OBJECT-TYPE
|
||
SYNTAX INTEGER (-99..99)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"temperature high threshold, default 60(<28><>)."
|
||
::= { trapSetThreshold 1 }
|
||
|
||
thresholdTemperatureLow OBJECT-TYPE
|
||
SYNTAX INTEGER (-99..99)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"temperature low threshold, default -25(<28><>)."
|
||
::= { trapSetThreshold 2 }
|
||
|
||
thresholdRegOnt OBJECT-TYPE
|
||
SYNTAX INTEGER (0..128)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont register number threshold, default 64."
|
||
::= { trapSetThreshold 3 }
|
||
|
||
edfaThresholdTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF EdfaThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa threshold table"
|
||
::= { trapSetThreshold 4 }
|
||
|
||
edfaThresholdEntry OBJECT-TYPE
|
||
SYNTAX EdfaThresholdEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of edfa threshold table"
|
||
INDEX { tntitInputId }
|
||
::= { edfaThresholdTable 1 }
|
||
|
||
EdfaThresholdEntry ::=
|
||
SEQUENCE
|
||
{
|
||
edfaTrapIndex INTEGER,
|
||
edfaTrapDescription OCTET STRING,
|
||
edfaTrapEnableSwitch INTEGER,
|
||
edfaThresholdLoLo OCTET STRING,
|
||
edfaThresholdLo OCTET STRING,
|
||
edfaThresholdHi OCTET STRING,
|
||
edfaThresholdHiHi OCTET STRING
|
||
}
|
||
|
||
edfaTrapIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..11)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of edfa trap, see gponTrapExtraInfo in edfaTrap description."
|
||
::= { edfaThresholdEntry 1 }
|
||
|
||
edfaTrapDescription OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The description of edfa trap, see gponTrapExtraInfo in edfaTrap description."
|
||
::= { edfaThresholdEntry 2 }
|
||
|
||
edfaTrapEnableSwitch OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfaTrapEnableSwitch:
|
||
0 disable
|
||
1 enable."
|
||
::= { edfaThresholdEntry 3 }
|
||
|
||
edfaThresholdLoLo OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..16))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa threshold lolo."
|
||
::= { edfaThresholdEntry 4 }
|
||
|
||
edfaThresholdLo OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..16))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa threshold lo."
|
||
::= { edfaThresholdEntry 5 }
|
||
|
||
edfaThresholdHi OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..16))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa threshold hi."
|
||
::= { edfaThresholdEntry 6 }
|
||
|
||
edfaThresholdHiHi OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..16))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"edfa threshold hihi."
|
||
::= { edfaThresholdEntry 7 }
|
||
|
||
------ trapClearThreshold --------------------------------------
|
||
trapClearThreshold OBJECT IDENTIFIER ::= { statusTrap 8 }
|
||
|
||
|
||
--------------------------------------------------------------
|
||
------------------ 3. oemTrue ------------------------------
|
||
--------------------------------------------------------------
|
||
trueXmlOntConfig OBJECT IDENTIFIER ::= { oemTrue 1 }
|
||
|
||
txocSlotId OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont slot id. "
|
||
::= { trueXmlOntConfig 1 }
|
||
|
||
txocPportId OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont pport id. "
|
||
::= { trueXmlOntConfig 2 }
|
||
|
||
txocOntId OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"ont id. "
|
||
::= { trueXmlOntConfig 3 }
|
||
|
||
txocServerIp OBJECT-TYPE
|
||
SYNTAX IpAddress
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"xml tftp server ip address."
|
||
::= { trueXmlOntConfig 4 }
|
||
|
||
txocSn OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"xml sn."
|
||
::= { trueXmlOntConfig 5 }
|
||
|
||
txocCrc OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"xml crc. "
|
||
::= { trueXmlOntConfig 6 }
|
||
|
||
trueNameToIndex OBJECT IDENTIFIER ::= { oemTrue 2 }
|
||
-- <20><>ģ<EFBFBD><C4A3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ת<EFBFBD><D7AA><EFBFBD><EFBFBD> index
|
||
|
||
tntiName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"profile name."
|
||
::= { trueNameToIndex 1 }
|
||
|
||
tntiType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"tntiType:
|
||
1 dba
|
||
2 vlan
|
||
3 us traffic
|
||
4 ds traffic
|
||
5 line
|
||
6 rule
|
||
7 unique."
|
||
::= { trueNameToIndex 2 }
|
||
|
||
tntiStatus OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"tntiStatus:
|
||
1 exist
|
||
2 not exist
|
||
3 full(& not exist)."
|
||
::= { trueNameToIndex 3 }
|
||
|
||
tntiIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"1. if tntiStatus is 1(exist), tntiIndex is the index of tntiName.
|
||
2. if tntiStatus is 2(not exist), tntiIndex is the index of an empty entry.
|
||
3. if titiStatus is 3(full), tntiIndex is M_INVALID((ulong)-20)."
|
||
::= { trueNameToIndex 4 }
|
||
|
||
-- true name to index table ----------------------------------
|
||
trueNameToIndexTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF TrueNameToIndexEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"true name to index table"
|
||
::= { oemTrue 3 }
|
||
|
||
trueNameToIndexEntry OBJECT-TYPE
|
||
SYNTAX TrueNameToIndexEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of true name to index table"
|
||
INDEX { tntitInputId }
|
||
::= { trueNameToIndexTable 1 }
|
||
|
||
TrueNameToIndexEntry ::=
|
||
SEQUENCE
|
||
{
|
||
tntitInputId INTEGER,
|
||
tntitName OCTET STRING,
|
||
tntitType INTEGER,
|
||
tntitStatus INTEGER,
|
||
tntitProfileId INTEGER
|
||
}
|
||
|
||
tntitInputId OBJECT-TYPE
|
||
SYNTAX INTEGER(0..4294967295)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of socket, should in <0-4294967295>."
|
||
::= { trueNameToIndexEntry 1 }
|
||
|
||
tntitName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..255))
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"profile name."
|
||
::= { trueNameToIndexEntry 2 }
|
||
|
||
tntitType OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"tntiType:
|
||
1 dba
|
||
2 vlan
|
||
3 us traffic
|
||
4 ds traffic
|
||
5 line
|
||
6 rule
|
||
7 unique."
|
||
::= { trueNameToIndexEntry 3 }
|
||
|
||
tntitStatus OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"tntiStatus:
|
||
1 exist
|
||
2 not exist
|
||
3 full(& not exist)."
|
||
::= { trueNameToIndexEntry 4 }
|
||
|
||
tntitProfileId OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"1. if tntiStatus is 1(exist), tntitProfileId is the index of tntiName.
|
||
2. if tntiStatus is 2(not exist), tntitProfileId is the index of an empty entry.
|
||
3. if titiStatus is 3(full), tntitProfileId is M_INVALID((ulong)-20)."
|
||
::= { trueNameToIndexEntry 5 }
|
||
|
||
--------------------------------------------------------------
|
||
------------------ 4. gponSwitch --------------------------
|
||
--------------------------------------------------------------
|
||
gponUdld OBJECT IDENTIFIER ::= { gponSwitch 1 }
|
||
gponPower OBJECT IDENTIFIER ::= { gponSwitch 2 }
|
||
gponFan OBJECT IDENTIFIER ::= { gponSwitch 3 }
|
||
|
||
-- gpon udld if table ----------------------------------
|
||
gponUdldIfTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF GponUdldIfEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"gpon udld if table"
|
||
::= { gponUdld 1 }
|
||
|
||
gponUdldIfEntry OBJECT-TYPE
|
||
SYNTAX GponUdldIfEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of gpon udld if table"
|
||
INDEX { guIfSlotIndex, guIfEportIndex }
|
||
::= { gponUdldIfTable 1 }
|
||
|
||
GponUdldIfEntry ::=
|
||
SEQUENCE
|
||
{
|
||
guIfSlotIndex INTEGER,
|
||
guIfEportIndex INTEGER,
|
||
guIfWorkmode INTEGER
|
||
}
|
||
|
||
guIfSlotIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(0..5)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of slot, should in <0-5>."
|
||
::= { gponUdldIfEntry 1 }
|
||
|
||
guIfEportIndex OBJECT-TYPE
|
||
SYNTAX INTEGER(1..16)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of eth port, should in <1-16>."
|
||
::= { gponUdldIfEntry 2 }
|
||
|
||
guIfWorkmode OBJECT-TYPE
|
||
SYNTAX INTEGER(0..1)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"guIfWorkmode:
|
||
0 normal
|
||
1 aggressive."
|
||
::= { gponUdldIfEntry 3 }
|
||
|
||
guDelaydownTime OBJECT-TYPE
|
||
SYNTAX INTEGER(1..5)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"udld delaydown-time, default 1(s). "
|
||
::= { gponUdld 2 }
|
||
|
||
-- gpon udld if table ----------------------------------
|
||
gponPowerTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF GponPowerEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"gpon power table"
|
||
::= { gponPower 1 }
|
||
|
||
gponPowerEntry OBJECT-TYPE
|
||
SYNTAX GponPowerEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of gpon power table"
|
||
INDEX { powerIndex }
|
||
::= { gponPowerTable 1 }
|
||
|
||
GponPowerEntry ::=
|
||
SEQUENCE
|
||
{
|
||
powerIndex INTEGER,
|
||
powerInsertedStaus INTEGER,
|
||
powerRunningStatus INTEGER
|
||
}
|
||
|
||
powerIndex OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
power_0(0),
|
||
power_1(1)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Power index."
|
||
::= { gponPowerEntry 1 }
|
||
|
||
powerInsertedStaus OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
empty(0),
|
||
inserted(1)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Power inserted status."
|
||
::= { gponPowerEntry 2 }
|
||
|
||
powerRunningStatus OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
no_good(0),
|
||
good(1)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Power running status."
|
||
::= { gponPowerEntry 3 }
|
||
|
||
gponFanInsertStatus OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
empty(0),
|
||
insert(1)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Fan insert status. "
|
||
::= { gponFan 1 }
|
||
|
||
gponFanTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF GponFanEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"gpon fan table"
|
||
::= { gponFan 2 }
|
||
|
||
gponFanEntry OBJECT-TYPE
|
||
SYNTAX GponFanEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"entry of gpon fan table"
|
||
INDEX { fanIndex }
|
||
::= { gponFanTable 1 }
|
||
|
||
GponFanEntry ::=
|
||
SEQUENCE
|
||
{
|
||
fanIndex INTEGER,
|
||
fanSpeed INTEGER
|
||
}
|
||
|
||
fanIndex OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Fan index."
|
||
::= { gponFanEntry 1 }
|
||
|
||
fanSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Fan speed in rpm."
|
||
::= { gponFanEntry 2 }
|
||
END
|