------------------------------------------------------------------------------ -- -- File : ngponMib.mi2 -- Description : gpon new platform configuration MIB -- Version : 1.0 -- Date : July 14, 2016 -- Copyright (c) 2016-2020 Genexis Systems, Inc. All Rights Reserved. -- ------------------------------------------------------------------------------ NGPON-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, TimeTicks FROM SNMPv2-SMI TimeInterval, RowStatus, TruthValue, TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC dataCom FROM ADMIN-MASTER-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; ngpon OBJECT IDENTIFIER ::= { dataCom 14 } -- gpon function ------------------------------------------ gponConfig OBJECT IDENTIFIER ::= { ngpon 1 } gponStatus OBJECT IDENTIFIER ::= { ngpon 2 } oemTrue OBJECT IDENTIFIER ::= { ngpon 3 } gponSwitch OBJECT IDENTIFIER ::= { ngpon 4 } configDevice OBJECT IDENTIFIER ::= { gponConfig 1 } configSlot OBJECT IDENTIFIER ::= { gponConfig 2 } configPport OBJECT IDENTIFIER ::= { gponConfig 3 } configOnt OBJECT IDENTIFIER ::= { gponConfig 4 } statusDevice OBJECT IDENTIFIER ::= { gponStatus 1 } statusSlot OBJECT IDENTIFIER ::= { gponStatus 2 } statusPport OBJECT IDENTIFIER ::= { gponStatus 3 } statusOnt OBJECT IDENTIFIER ::= { gponStatus 4 } statusTrap OBJECT IDENTIFIER ::= { gponStatus 5 } -------------------------------------------------------------- ------------------ 1.1. config device ---------------------- -------------------------------------------------------------- -- 1.1.1. deployControl -- 1.1.2. deployInactive -- 1.1.3. deployActive -- 1.1.4. deployDemo -- 1.1.5. configDeviceBaseInfo -- 1.1.1. deployControl ------------------------------------ deployControl OBJECT IDENTIFIER ::= { configDevice 1 } deployPermission OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Set deployPermission = 0 to request permission. Set deployPermission = 1 to release permission. When read, the value is always 0." ::= { deployControl 1 } deployAction OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "Set deployAction = 0 to active the deploy. Set deployAction = 1 to rebuild the deploy. Set deployAction = 2 to clear the deploy. When read, the value is always 0." ::= { deployControl 2 } -- 1.1.2. deployInactive ---------------------------------- deployInactive OBJECT IDENTIFIER ::= { configDevice 2 } -- 1.1.2.1. inactiveTrafficConfig -- 1.1.2.2. inactiveDbaTable -- 1.1.2.3. inactiveLineCommonConfig -- 1.1.2.4. inactiveLineSFUConfig -- 1.1.2.5. inactiveLineHGUConfig -- 1.1.2.6. inactiveRuleTable -- 1.1.2.7. inactiveUniqueConfig -- 1.1.2.8. inactiveCtrlMcastConfig -- 1.1.2.9. inactiveCtrlAlarmConfig -- 1.1.2.1. inactiveTrafficConfig -------------------------- inactiveTrafficConfig OBJECT IDENTIFIER ::= { deployInactive 1 } -- 1.1.2.1.1. inactiveVlanTable -- 1.1.2.1.2. inactiveUsTrafficTable -- 1.1.2.1.3. inactiveDsTrafficTable -- 1.1.2.1.4. inactiveVlanPrimaryTable -- 1.1.2.1.1. inactiveVlanTable -------------------------- inactiveVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive vlan table." ::= { inactiveTrafficConfig 1 } inactiveVlanEntry OBJECT-TYPE SYNTAX InactiveVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive vlan table" INDEX { inactiveVlanIndex, inactiveVlanSubIndex } ::= { inactiveVlanTable 1 } InactiveVlanEntry ::= SEQUENCE { inactiveVlanIndex INTEGER, inactiveVlanSubIndex INTEGER, inactiveVlanAction INTEGER, inactiveVlanOldVid INTEGER, inactiveVlanOldPriority INTEGER, inactiveVlanNewVid INTEGER, inactiveVlanNewPriority INTEGER, inactiveVlanRowStatus RowStatus } inactiveVlanIndex OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of inactive vlan table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveVlanEntry 1 } inactiveVlanSubIndex OBJECT-TYPE SYNTAX INTEGER(1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The 2nd index of inactive vlan table, should be inputted with <1-32>." ::= { inactiveVlanEntry 2 } inactiveVlanAction OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveVlanAction: 0 NULL 1 translate 2 add 3 add default" ::= { inactiveVlanEntry 3 } inactiveVlanOldVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "old vid, or inner vid, should in <1-4094>." ::= { inactiveVlanEntry 4 } inactiveVlanOldPriority OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "old priority, or inner priority, should in <0-7>." ::= { inactiveVlanEntry 5 } inactiveVlanNewVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "new vid, or outer vid, or default vid, should in <1-4094>." ::= { inactiveVlanEntry 6 } inactiveVlanNewPriority OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "new priority, or outer priority, or default priority, should in <0-7>." ::= { inactiveVlanEntry 7 } inactiveVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveVlanEntry 8 } -- 1.1.2.1.2. inactiveUsTrafficTable -------------------------- inactiveUsTrafficTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUsTrafficEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive us traffic table." ::= { inactiveTrafficConfig 2 } inactiveUsTrafficEntry OBJECT-TYPE SYNTAX InactiveUsTrafficEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive us traffic table" INDEX { inactiveUsTrafficIndex } ::= { inactiveUsTrafficTable 1 } InactiveUsTrafficEntry ::= SEQUENCE { inactiveUsTrafficIndex INTEGER, inactiveUsTrafficName OCTET STRING, inactiveUsTrafficPq INTEGER, inactiveUsTrafficCir INTEGER, inactiveUsTrafficPir INTEGER, inactiveUsTrafficCbs INTEGER, inactiveUsTrafficPbs INTEGER, inactiveUsTrafficRowStatus RowStatus } inactiveUsTrafficIndex OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of inactive us traffic table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUsTrafficEntry 1 } inactiveUsTrafficName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "us traffic name, max length: 128." ::= { inactiveUsTrafficEntry 2 } inactiveUsTrafficPq OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport priority queue, should be inputted with <0-7>." ::= { inactiveUsTrafficEntry 3 } inactiveUsTrafficCir OBJECT-TYPE SYNTAX INTEGER(64..1310720) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport committed infomation rate, should be inputted with <64-10240000>. must to be divisible by 64kbps,must not less than 64 kbps." ::= { inactiveUsTrafficEntry 4 } inactiveUsTrafficPir OBJECT-TYPE SYNTAX INTEGER(64..1310720) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport peek infomation rate, should be inputted with <64-10240000>. must to be divisible by 64kbps,must not less than 64 kbps." ::= { inactiveUsTrafficEntry 5 } inactiveUsTrafficCbs OBJECT-TYPE SYNTAX INTEGER(2000..1310720) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport committed burst size, should be inputted with <2000-10240000>." ::= { inactiveUsTrafficEntry 6 } inactiveUsTrafficPbs OBJECT-TYPE SYNTAX INTEGER(2000..1310720) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport peek burst size, should be inputted with <2000-10240000>." ::= { inactiveUsTrafficEntry 7 } inactiveUsTrafficRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveUsTrafficEntry 8 } -- 1.1.2.1.2. inactiveDsTrafficTable -------------------------- inactiveDsTrafficTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveDsTrafficEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive ds traffic table." ::= { inactiveTrafficConfig 3 } inactiveDsTrafficEntry OBJECT-TYPE SYNTAX InactiveDsTrafficEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive ds traffic table" INDEX { inactiveDsTrafficIndex } ::= { inactiveDsTrafficTable 1 } InactiveDsTrafficEntry ::= SEQUENCE { inactiveDsTrafficIndex INTEGER, inactiveDsTrafficName OCTET STRING, inactiveDsTrafficRate INTEGER, inactiveDsTrafficBurst INTEGER, inactiveDsTrafficRowStatus RowStatus } inactiveDsTrafficIndex OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of inactive ds traffic table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveDsTrafficEntry 1 } inactiveDsTrafficName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "ds traffic name, max length: 128." ::= { inactiveDsTrafficEntry 2 } inactiveDsTrafficRate OBJECT-TYPE SYNTAX INTEGER(0..1677215) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport ds bandwidth rate, should be inputted with <0-1677215>." ::= { inactiveDsTrafficEntry 3 } inactiveDsTrafficBurst OBJECT-TYPE SYNTAX INTEGER(0..1677215) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport ds burst size, should be inputted with <0-1677215>." ::= { inactiveDsTrafficEntry 4 } inactiveDsTrafficRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveDsTrafficEntry 5 } -- 1.1.2.1.1. inactiveVlanPrimaryTable -------------------------- inactiveVlanPrimaryTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveVlanPrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive vlan primary table." ::= { inactiveTrafficConfig 4 } inactiveVlanPrimaryEntry OBJECT-TYPE SYNTAX InactiveVlanPrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive vlan primary table" INDEX { inactiveVlanPriIndex } ::= { inactiveVlanPrimaryTable 1 } InactiveVlanPrimaryEntry ::= SEQUENCE { inactiveVlanPriIndex INTEGER, inactiveVlanPriName OCTET STRING, inactiveVlanPriRowStatus RowStatus } inactiveVlanPriIndex OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of inactive vlan table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveVlanPrimaryEntry 1 } inactiveVlanPriName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "name of inactive vlan entry." ::= { inactiveVlanPrimaryEntry 2 } inactiveVlanPriRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveVlanPrimaryEntry 3 } -- 1.1.2.2. inactiveDbaTable ------------------------------ inactiveDbaTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveDbaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain dba table" ::= { deployInactive 2 } inactiveDbaEntry OBJECT-TYPE SYNTAX InactiveDbaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive dba table" INDEX { inactiveDbaIndex } ::= { inactiveDbaTable 1 } InactiveDbaEntry ::= SEQUENCE { inactiveDbaIndex INTEGER, inactiveDbaName OCTET STRING, inactiveDbaType INTEGER, inactiveDbaFixBandwidth INTEGER, inactiveDbaAssuredBandwidth INTEGER, inactiveDbaMaxBandwidth INTEGER, inactiveDbaRowStatus RowStatus, inactiveDbaMethod INTEGER } inactiveDbaIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of inactive dba table, should be inputted with <0-127>." ::= { inactiveDbaEntry 1 } inactiveDbaName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "inactive dba name, max length: 128." ::= { inactiveDbaEntry 2 } inactiveDbaType OBJECT-TYPE SYNTAX INTEGER(1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveDbaType, 1 fixed bandwidth 2 assured bandwidth 3 assured and max bandwidth 4 max bandwidth 5 fixed and assured and max bandwidth" ::= { inactiveDbaEntry 3 } inactiveDbaFixBandwidth OBJECT-TYPE SYNTAX INTEGER(128..1310720) MAX-ACCESS read-write STATUS current DESCRIPTION "Must to be divisible by 64kbps, must not less than 128 kbps." ::= { inactiveDbaEntry 4 } inactiveDbaAssuredBandwidth OBJECT-TYPE SYNTAX INTEGER(0..1310592) MAX-ACCESS read-write STATUS current DESCRIPTION "Must to be divisible by 64kbps, Can be 0. If not 0, it must be at least 256 kbps." ::= { inactiveDbaEntry 5 } inactiveDbaMaxBandwidth OBJECT-TYPE SYNTAX INTEGER(0..1310720) MAX-ACCESS read-write STATUS current DESCRIPTION "Must to be divisible by 64kbps, and must not be less than the sum of assured BW plus fixedBW. Must less than 1310720 kbps" ::= { inactiveDbaEntry 6 } inactiveDbaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveDbaEntry 7 } inactiveDbaMethod OBJECT-TYPE SYNTAX INTEGER { NSR(0), SR(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "dba method. 0(default): not SR 1: SR" ::= { inactiveDbaEntry 8 } -- 1.1.2.3. inactiveLineCommonConfig ---------------------- inactiveLineCommonConfig OBJECT IDENTIFIER ::= { deployInactive 3 } -- 1.1.2.3.1. inactiveLinePrimaryTable -- 1.1.2.3.2. inactiveLineTcontTable -- 1.1.2.3.3. inactiveLineGemportTable -- 1.1.2.3.4. inactiveLineFlowmappingTable -- 1.1.2.3.5. inactiveLineAttrMgmtTable -- 1.1.2.3.6. inactiveLineCportTable -- 1.1.2.3.7. inactiveLineAlarmRefTable -- 1.1.2.3.1. inactiveLinePrimaryTable -------------------- inactiveLinePrimaryTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveLinePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain line primary table" ::= { inactiveLineCommonConfig 1 } inactiveLinePrimaryEntry OBJECT-TYPE SYNTAX InactiveLinePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive line primary table" INDEX { inactiveLineIndex } ::= { inactiveLinePrimaryTable 1 } InactiveLinePrimaryEntry ::= SEQUENCE { inactiveLineIndex INTEGER, inactiveLineDeviceType OCTET STRING, inactiveLineName OCTET STRING, inactiveLineTrafficMode INTEGER, inactiveLineMappingMode INTEGER, inactiveLineRowStatus RowStatus, inactiveLineFecSwitch INTEGER } inactiveLineIndex OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveLinePrimaryEntry 1 } inactiveLineDeviceType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(7..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineDeviceType: x30-420 4ETH+2POTS SFU t10-100 1ETH SFU t10-420 4ETH+2POTS SFU t10-214 2ETH(1ETH+1iTV)+1POTS SFU t10-423 4ETH+2POTS+WIFI+USB HGU t10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU t10-403 4ETH+WIFI+USB HGU t60-100 1ETH SFU c40-100 1ETH SFU c30-420 4ETH+2POTS SFU c40-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU c30-401 4ETH+WIFI HGU c30-423 4ETH+2POTS+WIFI+USB HGU c31-423 4ETH+2POTS+WIFI+USB HGU+SFU c30-214 2ETH(1ETH+1iTV)+1POTS SFU c40-210 1GE+1FE+1POTS HGU c30-400 4ETH SFU c40-201 2ETH+WIFI HGU c40-429 4ETH+2POTS+CATV+WIFI HGU c40-428 4ETH+2POTS+CATV HGU c40-218 2ETH+1POTS+CATV HGU m50-420 4ETH+2POTS SFU f10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU h60-100 1ETH SFU s10-214 2ETH(1ETH+1iTV)+1POTS HGU s30-100 1ETH SFU n20-100 1ETH SFU n20-400 4ETH SFU n40-100 1ETH SFU n70-400 4ETH SFU n71-400 4ETH SFU n71-408 4ETH+CATV SFU n71-401 4ETH+WIFI HGU n71-409 4ETH+CATV+WIFI HGU n40-428-1 4ETH+2POTS+CATV+PoE HGU n40-100-1 1ETH+PoE SFU n40-400-1 4ETH+PoE SFU n40-420-1 4ETH+2POTS+PoE HGU n40-429 4ETH+2POTS+CATV+WIFI HGU n40-800-1 8ETH+PoE MDU d10-423 4ETH+2POTS+WIFI+USB HGU l30-100 1ETH SFU l30-210 2ETH+1POTS SFU g40-108 1ETH+CATV SFU" ::= { inactiveLinePrimaryEntry 2 } inactiveLineName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "line name, max length: 128." ::= { inactiveLinePrimaryEntry 3 } inactiveLineTrafficMode OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineTrafficMode: 0 pri-queue: priority queue scheduling 1 gem-car: GEM traffic control" ::= { inactiveLinePrimaryEntry 4 } inactiveLineMappingMode OBJECT-TYPE SYNTAX INTEGER(0..6) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineMappingMode: 0 vlan 1 priority 2 vlan-priority 3 port 4 port-vlan 5 port-priority 6 port-vlan-priority" ::= { inactiveLinePrimaryEntry 5 } inactiveLineRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveLinePrimaryEntry 6 } inactiveLineFecSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineFecSwitch: 0 false (default) 1 true" ::= { inactiveLinePrimaryEntry 7 } -- 1.1.2.3.2. inactiveLineTcontTable ---------------------- inactiveLineTcontTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveLineTcontEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain line tcont table, now only for tcont bind dba." ::= { inactiveLineCommonConfig 2 } inactiveLineTcontEntry OBJECT-TYPE SYNTAX InactiveLineTcontEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive line tcont table" INDEX { inactiveLineIndexI, inactiveLineTcontIndex } ::= { inactiveLineTcontTable 1 } InactiveLineTcontEntry ::= SEQUENCE { inactiveLineIndexI INTEGER, inactiveLineTcontIndex INTEGER, inactiveLineTcontDbaIndex INTEGER, inactiveLineTcontRowStatus RowStatus } inactiveLineIndexI OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveLineTcontEntry 1 } inactiveLineTcontIndex OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of tcont, the 2nd index of this table. Should in <1-8>." ::= { inactiveLineTcontEntry 2 } inactiveLineTcontDbaIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "The index of tcont bind dba, should be inputted with <0-127>." ::= { inactiveLineTcontEntry 3 } inactiveLineTcontRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveLineTcontEntry 4 } -- 1.1.2.3.3. inactiveLineGemportTable -------------------- inactiveLineGemportTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveLineGemportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain line gemport table." ::= { inactiveLineCommonConfig 3 } inactiveLineGemportEntry OBJECT-TYPE SYNTAX InactiveLineGemportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive line gemport table" INDEX { inactiveLineIndexII, inactiveLineGemportIndex } ::= { inactiveLineGemportTable 1 } InactiveLineGemportEntry ::= SEQUENCE { inactiveLineIndexII INTEGER, inactiveLineGemportIndex INTEGER, inactiveLineGemportTcontId INTEGER, inactiveLineGemportVlanProfileId INTEGER, inactiveLineGemportUsProfileId INTEGER, inactiveLineGemportDsProfileId INTEGER, inactiveLineGemportRowStatus RowStatus } inactiveLineIndexII OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveLineGemportEntry 1 } inactiveLineGemportIndex OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of gemport, the 2nd index of this table. Should in <1-24>." ::= { inactiveLineGemportEntry 2 } inactiveLineGemportTcontId OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport bind tcont index, should be inputted with <1-8>." ::= { inactiveLineGemportEntry 3 } inactiveLineGemportVlanProfileId OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport vlan profile id, should be inputted with <0-4095>." ::= { inactiveLineGemportEntry 4 } inactiveLineGemportUsProfileId OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport us traffic profile id, should be inputted with <0-4095>." ::= { inactiveLineGemportEntry 5 } inactiveLineGemportDsProfileId OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport ds traffic profile id, should be inputted with <0-4095>." ::= { inactiveLineGemportEntry 6 } inactiveLineGemportRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveLineGemportEntry 7 } -- 1.1.2.3.4. inactiveLineFlowmappingTable ---------------- inactiveLineFlowmappingTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveLineFlowmappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain line flow mapping table." ::= { inactiveLineCommonConfig 4 } inactiveLineFlowmappingEntry OBJECT-TYPE SYNTAX InactiveLineFlowmappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive line flow mapping table" INDEX { inactiveLineIndexIII, inactiveLineFlowmappingIndex } ::= { inactiveLineFlowmappingTable 1 } InactiveLineFlowmappingEntry ::= SEQUENCE { inactiveLineIndexIII INTEGER, inactiveLineFlowmappingIndex INTEGER, inactiveLineFlowmappingVid INTEGER, inactiveLineFlowmappingPriority INTEGER, inactiveLineFlowmappingEthport INTEGER, inactiveLineFlowmappingGemport INTEGER, inactiveLineFlowmappingType INTEGER, inactiveLineFlowmappingRowStatus RowStatus } inactiveLineIndexIII OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveLineFlowmappingEntry 1 } inactiveLineFlowmappingIndex OBJECT-TYPE SYNTAX INTEGER(0..47) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of flowmapping, the 2nd index of this table. Should in <1-48>. The range is not always fit, please see range in commands." ::= { inactiveLineFlowmappingEntry 2 } inactiveLineFlowmappingVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The flow mapping vid, should be inputted with <1-4094>." ::= { inactiveLineFlowmappingEntry 3 } inactiveLineFlowmappingPriority OBJECT-TYPE SYNTAX INTEGER(0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The flow mapping priority, should be inputted with <0-8>. default value 8 means don't care 802.1p priority." ::= { inactiveLineFlowmappingEntry 4 } inactiveLineFlowmappingEthport OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The flow mapping ethernet port id, should be inputted with <1-8>." ::= { inactiveLineFlowmappingEntry 5 } inactiveLineFlowmappingGemport OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-write STATUS current DESCRIPTION "The flow mapping gem port id, should be inputted with <1-24>." ::= { inactiveLineFlowmappingEntry 6 } inactiveLineFlowmappingType OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineFlowmappingType: 0 flowmapping not base port. 1 flowmapping base eth port. 2 flowmapping base veip port. 3. flowmapping base iphost port." ::= { inactiveLineFlowmappingEntry 7 } inactiveLineFlowmappingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveLineFlowmappingEntry 8 } -- 1.1.2.3.5. inactiveLineAttrMgmtTable -------------------- inactiveLineAttrMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveLineAttrMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain line attribute management table." ::= { inactiveLineCommonConfig 5 } inactiveLineAttrMgmtEntry OBJECT-TYPE SYNTAX InactiveLineAttrMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive line attribute management table" INDEX { inactiveLineIndexIV, inactiveLineAttrMgmtIndex } ::= { inactiveLineAttrMgmtTable 1 } InactiveLineAttrMgmtEntry ::= SEQUENCE { inactiveLineIndexIV INTEGER, inactiveLineAttrMgmtIndex INTEGER, inactiveLineAttrMgmtNportType INTEGER, inactiveLineAttrMgmtNport INTEGER, inactiveLineAttrMgmtEtypeFilter INTEGER, inactiveLineAttrMgmtVlanMode INTEGER, inactiveLineAttrMgmtCvlanVid INTEGER, inactiveLineAttrMgmtCvlanPri INTEGER, inactiveLineAttrMgmtSvlanVid INTEGER, inactiveLineAttrMgmtSvlanPri INTEGER, inactiveLineAttrMgmtRowStatus RowStatus } inactiveLineIndexIV OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveLineAttrMgmtEntry 1 } inactiveLineAttrMgmtIndex OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of attribute management, the 2nd index of this table. Should in <1-64>." ::= { inactiveLineAttrMgmtEntry 2 } inactiveLineAttrMgmtNportType OBJECT-TYPE SYNTAX INTEGER(1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineAttrMgmtNportType: 1 eth port in sfu 2 veip port in hgu 3 iphost virtual port, for voip, tdm, etc." ::= { inactiveLineAttrMgmtEntry 3 } inactiveLineAttrMgmtNport OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "The port of attribute management, if eport, should in <1-8>." ::= { inactiveLineAttrMgmtEntry 4 } inactiveLineAttrMgmtEtypeFilter OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineAttrMgmtEtypeFilter: 0 no filter 1 filter ipoe frame 2 filter pppoe frame 3 filter arp frame" ::= { inactiveLineAttrMgmtEntry 5 } inactiveLineAttrMgmtVlanMode OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineAttrMgmtVlanMode: 0 transparent 1 tag 2 translation 3 trunk 4 QinQ" ::= { inactiveLineAttrMgmtEntry 6 } inactiveLineAttrMgmtCvlanVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "cvlan vid, should be inputted with <1-4094>." ::= { inactiveLineAttrMgmtEntry 7 } inactiveLineAttrMgmtCvlanPri OBJECT-TYPE SYNTAX INTEGER(0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The cvlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority." ::= { inactiveLineAttrMgmtEntry 8 } inactiveLineAttrMgmtSvlanVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "svlan vid, should be inputted with <1-4094>." ::= { inactiveLineAttrMgmtEntry 9 } inactiveLineAttrMgmtSvlanPri OBJECT-TYPE SYNTAX INTEGER(0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "svlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority." ::= { inactiveLineAttrMgmtEntry 10 } inactiveLineAttrMgmtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveLineAttrMgmtEntry 11 } -- 1.1.2.3.6. inactiveLineCportTable -------------------- inactiveLineCportTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveLineCportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain line catv port management table." ::= { inactiveLineCommonConfig 6 } inactiveLineCportEntry OBJECT-TYPE SYNTAX InactiveLineCportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive line catv port management table" INDEX { inactiveLineIndexX, inactiveLineCportIndex } ::= { inactiveLineCportTable 1 } InactiveLineCportEntry ::= SEQUENCE { inactiveLineIndexX INTEGER, inactiveLineCportIndex INTEGER, inactiveLineCportSwitch INTEGER, inactiveLineCportAgcMode INTEGER, inactiveLineCportAgcRange INTEGER } inactiveLineIndexX OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveLineCportEntry 1 } inactiveLineCportIndex OBJECT-TYPE SYNTAX INTEGER(1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of catv port management, the 2nd index of this table. Should in <1-4>." ::= { inactiveLineCportEntry 2 } inactiveLineCportSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineCportSwitch: 0 disable 1 enable(default)" ::= { inactiveLineCportEntry 3 } inactiveLineCportAgcMode OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineCportAgcMode: 0 No AGC 1 Broadband RF AGC 2 Optical AGC" ::= { inactiveLineCportEntry 4 } inactiveLineCportAgcRange OBJECT-TYPE SYNTAX INTEGER(-120..60) MAX-ACCESS read-write STATUS current DESCRIPTION "catv port agc range, default: 0." ::= { inactiveLineCportEntry 5 } -- 1.1.2.3.7. inactiveLineAlarmRefTable -------------------- inactiveLineAlarmRefTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveLineAlarmRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive line alarm Reference table." ::= { inactiveLineCommonConfig 7 } inactiveLineAlarmRefEntry OBJECT-TYPE SYNTAX InactiveLineAlarmRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive line alarm Reference table" INDEX { inactiveLineAlarmRefLIndex } ::= { inactiveLineAlarmRefTable 1 } InactiveLineAlarmRefEntry ::= SEQUENCE { inactiveLineAlarmRefLIndex INTEGER, inactiveLineAlarmRefAIndex INTEGER, inactiveLineAlarmRefAName OCTET STRING, inactiveLineAlarmRefRowStatus RowStatus } inactiveLineAlarmRefLIndex OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The line index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveLineAlarmRefEntry 1 } inactiveLineAlarmRefAIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-create STATUS current DESCRIPTION "The index of alarm table to reference, Should in <0-127>." ::= { inactiveLineAlarmRefEntry 2 } inactiveLineAlarmRefAName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The entry name of alarm table to reference, Should in <1-128>." ::= { inactiveLineAlarmRefEntry 3 } inactiveLineAlarmRefRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of inactive line alarm Reference table." ::= { inactiveLineAlarmRefEntry 4 } -- 1.1.2.4. inactiveLineSFUConfig -------------------------- inactiveLineSFUConfig OBJECT IDENTIFIER ::= { deployInactive 4 } -- 1.1.2.4.1. inactiveLineSFUTable -- 1.1.2.4.2. inactiveLineSFUEthportTable -- 1.1.2.4.1. inactiveLineSFUTable ------------------------ inactiveLineSFUTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveLineSFUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain line SFU primary table." ::= { inactiveLineSFUConfig 1 } inactiveLineSFUEntry OBJECT-TYPE SYNTAX InactiveLineSFUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive line sfu primary table" INDEX { inactiveLineIndexV } ::= { inactiveLineSFUTable 1 } InactiveLineSFUEntry ::= SEQUENCE { inactiveLineIndexV INTEGER, inactiveLineSfuLocalSwitch INTEGER, inactiveLineSfuLoopDetectSwitch INTEGER } inactiveLineIndexV OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { inactiveLineSFUEntry 1 } inactiveLineSfuLocalSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineSfuLocalSwitch: 0 disable(default) 1 enable." ::= { inactiveLineSFUEntry 2 } inactiveLineSfuLoopDetectSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineSfuLoopDetectSwitch: 0 disable(default) 1 enable." ::= { inactiveLineSFUEntry 3 } -- 1.1.2.4.2. inactiveLineSFUEthportTable ------------------ inactiveLineSFUEthportTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveLineSFUEthportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain line SFU ethernet port table." ::= { inactiveLineSFUConfig 2 } inactiveLineSFUEthportEntry OBJECT-TYPE SYNTAX InactiveLineSFUEthportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive line SFU ethernet port table" INDEX { inactiveLineIndexVI, inactiveLineSfuEthportIndex } ::= { inactiveLineSFUEthportTable 1 } InactiveLineSFUEthportEntry ::= SEQUENCE { inactiveLineIndexVI INTEGER, inactiveLineSfuEthportIndex INTEGER, inactiveLineSfuEthportSwitch INTEGER, inactiveLineSfuEthportFlowCtrlSwitch INTEGER, inactiveLineSfuEthportLoopbackSwitch INTEGER, inactiveLineSfuEthportFastLeaveSwitch INTEGER, inactiveLineSfuEthportMaxGroups INTEGER, inactiveLineSfuEthportMaxMacCount INTEGER, inactiveLineSfuEthportMcastMode INTEGER, inactiveLineSfuEthportDsIgmpControlType INTEGER, inactiveLineSfuEthportDsIgmpVid INTEGER, inactiveLineSfuEthportDsIgmpPri INTEGER, inactiveLineSfuEthportDsIgmpRowStatus RowStatus, inactiveLineSfuEthportUsIgmpControlType INTEGER, inactiveLineSfuEthportUsIgmpVid INTEGER, inactiveLineSfuEthportUsIgmpPri INTEGER, inactiveLineSfuEthportUsIgmpRowStatus RowStatus, inactiveLineSfuEthportBwCir INTEGER, inactiveLineSfuEthportBwCbs INTEGER, inactiveLineSfuEthportBwPir INTEGER, inactiveLineSfuEthportBwPbs INTEGER, inactiveLineSfuEthportBwRowStatus RowStatus } inactiveLineIndexVI OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveLineSFUEthportEntry 1 } inactiveLineSfuEthportIndex OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>." ::= { inactiveLineSFUEthportEntry 2 } inactiveLineSfuEthportSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineSfuEthportSwitch: 0 no shutdown(default) 1 shutdown" ::= { inactiveLineSFUEthportEntry 3 } inactiveLineSfuEthportFlowCtrlSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineSfuEthportFlowCtrlSwitch: 0 disable(default) 1 enable" ::= { inactiveLineSFUEthportEntry 4 } inactiveLineSfuEthportLoopbackSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineSfuEthportLoopbackSwitch: 0 disable(default) 1 enable" ::= { inactiveLineSFUEthportEntry 5 } inactiveLineSfuEthportFastLeaveSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineSfuEthportFastLeaveSwitch: 0 disable(default) 1 enable" ::= { inactiveLineSFUEthportEntry 6 } inactiveLineSfuEthportMaxGroups OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port max igmp groups, should be inputted with <1-128>." ::= { inactiveLineSFUEthportEntry 7 } inactiveLineSfuEthportMaxMacCount OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port max mac address count, should be inputted with <1-255>." ::= { inactiveLineSFUEthportEntry 8 } inactiveLineSfuEthportMcastMode OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineSfuEthportMcastMode(some ont not support): 0 control 1 igmp snooping 2 unconcern(default)" ::= { inactiveLineSFUEthportEntry 9 } inactiveLineSfuEthportDsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineSfuEthportDsIgmpControlType: 0 transparent(default, only for read) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid" ::= { inactiveLineSFUEthportEntry 10 } inactiveLineSfuEthportDsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port downstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { inactiveLineSFUEthportEntry 11 } inactiveLineSfuEthportDsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { inactiveLineSFUEthportEntry 12 } inactiveLineSfuEthportDsIgmpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus for ethport ds igmp tag control." ::= { inactiveLineSFUEthportEntry 13 } inactiveLineSfuEthportUsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineSfuEthportUsIgmpControlType: 0 transparent(default, only for read) 1 add tag 2 replace tag 3 replace only vid 4 add only vid" ::= { inactiveLineSFUEthportEntry 14 } inactiveLineSfuEthportUsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port upstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { inactiveLineSFUEthportEntry 15 } inactiveLineSfuEthportUsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { inactiveLineSFUEthportEntry 16 } inactiveLineSfuEthportUsIgmpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus for ethport us igmp tag control." ::= { inactiveLineSFUEthportEntry 17 } inactiveLineSfuEthportBwCir OBJECT-TYPE SYNTAX INTEGER(64..1024000) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port bandwidth egress cir, should be inputted with <64-1024000>." ::= { inactiveLineSFUEthportEntry 18 } inactiveLineSfuEthportBwCbs OBJECT-TYPE SYNTAX INTEGER(2..32000) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port bandwidth egress cbs, should be inputted with <2-32000>." ::= { inactiveLineSFUEthportEntry 19 } inactiveLineSfuEthportBwPir OBJECT-TYPE SYNTAX INTEGER(64..1024000) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port bandwidth egress pir, should be inputted with <64-1024000>." ::= { inactiveLineSFUEthportEntry 20 } inactiveLineSfuEthportBwPbs OBJECT-TYPE SYNTAX INTEGER(2..32000) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port bandwidth egress pbs, should be inputted with <2-32000>." ::= { inactiveLineSFUEthportEntry 21 } inactiveLineSfuEthportBwRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus for ethernet port bandwidth egress." ::= { inactiveLineSFUEthportEntry 22 } -- 1.1.2.5. inactiveLineHGUConfig -------------------------- inactiveLineHGUConfig OBJECT IDENTIFIER ::= { deployInactive 5 } -- 1.1.2.5.1. inactiveLineHGUTable -- 1.1.2.5.1. inactiveLineHGUTable ------------------------ inactiveLineHGUTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveLineHGUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain line HGU table." ::= { inactiveLineHGUConfig 1 } inactiveLineHGUEntry OBJECT-TYPE SYNTAX InactiveLineHGUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive line HGU table" INDEX { inactiveLineIndexVIII } ::= { inactiveLineHGUTable 1 } InactiveLineHGUEntry ::= SEQUENCE { inactiveLineIndexVIII INTEGER, inactiveLineHguSwitch INTEGER, inactiveLineHguFastLeaveSwitch INTEGER, inactiveLineHguMaxGroups INTEGER, inactiveLineHguMaxMacCount INTEGER, inactiveLineHguMcastMode INTEGER, inactiveLineHguDsIgmpControlType INTEGER, inactiveLineHguDsIgmpVid INTEGER, inactiveLineHguDsIgmpPri INTEGER, inactiveLineHguDsIgmpRowStatus RowStatus, inactiveLineHguUsIgmpControlType INTEGER, inactiveLineHguUsIgmpVid INTEGER, inactiveLineHguUsIgmpPri INTEGER, inactiveLineHguUsIgmpRowStatus RowStatus, inactiveLineHguMcastEportSwitch INTEGER } inactiveLineIndexVIII OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveLineHGUEntry 1 } inactiveLineHguSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineHguSwitch: 0 no shutdown(default) 1 shutdown" ::= { inactiveLineHGUEntry 2 } inactiveLineHguFastLeaveSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineHguFlowCtrlSwitch: 0 disable(default) 1 enable" ::= { inactiveLineHGUEntry 3 } inactiveLineHguMaxGroups OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The HGU max igmp groups, should be inputted with <1-128>." ::= { inactiveLineHGUEntry 4 } inactiveLineHguMaxMacCount OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The HGU max mac address count, should be inputted with <1-255>." ::= { inactiveLineHGUEntry 5 } inactiveLineHguMcastMode OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineHguMcastMode(some ont not support): 0 control 1 igmp snooping 2 unconcern(default)" ::= { inactiveLineHGUEntry 6 } inactiveLineHguDsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineHguDsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid" ::= { inactiveLineHGUEntry 7 } inactiveLineHguDsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The HGU downstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { inactiveLineHGUEntry 8 } inactiveLineHguDsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { inactiveLineHGUEntry 9 } inactiveLineHguDsIgmpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus for ds igmp tag control." ::= { inactiveLineHGUEntry 10 } inactiveLineHguUsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineHguUsIgmpControlType: 0 transparent(default) 1 add tag 2 replace tag 3 replace only vid 4 add only vid" ::= { inactiveLineHGUEntry 11 } inactiveLineHguUsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The HGU upstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { inactiveLineHGUEntry 12 } inactiveLineHguUsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { inactiveLineHGUEntry 13 } inactiveLineHguUsIgmpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus for us igmp tag control." ::= { inactiveLineHGUEntry 14 } inactiveLineHguMcastEportSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveLineHguMcastEportSwitch: 0 disable Hgu ctrl mcast base on eport(default) 1 enable Hgu ctrl mcast base on eport" ::= { inactiveLineHGUEntry 15 } -- 1.1.2.6. inactiveRuleTable ------------------------------ inactiveRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain rule table" ::= { deployInactive 6 } inactiveRuleEntry OBJECT-TYPE SYNTAX InactiveRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive rule table" INDEX { inactiveRuleIndex } ::= { inactiveRuleTable 1 } InactiveRuleEntry ::= SEQUENCE { inactiveRuleIndex INTEGER, inactiveRuleName OCTET STRING, inactiveRuleAction INTEGER, inactiveRuleAuthMode INTEGER, inactiveRuleAuthSn OCTET STRING, inactiveRuleAuthPw OCTET STRING, inactiveRuleAuthLoid OCTET STRING, inactiveRuleAuthLopw OCTET STRING, inactiveRuleAssignedSlot OCTET STRING, inactiveRuleAssignedPport OCTET STRING, inactiveRuleAssignedOnt OCTET STRING, inactiveRuleLineIndexesStr OCTET STRING, inactiveRuleDefaultLine INTEGER, inactiveRuleRowStatus RowStatus, inactiveRuleOnceOnSwitch INTEGER, inactiveRuleOnceOnAgingTime INTEGER, inactiveRuleAuthSnFmt INTEGER, inactiveRuleAuthPwFmt INTEGER, inactiveRuleOntStatus INTEGER } inactiveRuleIndex OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of rule table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveRuleEntry 1 } inactiveRuleName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "rule description, max length: 128." ::= { inactiveRuleEntry 2 } inactiveRuleAction OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveRuleAction: 0 permit 1 deny" ::= { inactiveRuleEntry 3 } inactiveRuleAuthMode OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveRuleAuthMode: 0 auth mode sn 1 auth mode pw 2 auth mode sn_pw 3 auth mode loid 4 auth mode lopw 5 auth mode loid_lopw" ::= { inactiveRuleEntry 4 } inactiveRuleAuthSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "auth sn, mix(string-hex) format or hex format. length: mix: 13 hex: 16 you can use '*' represents any one character or hexadecimal number." ::= { inactiveRuleEntry 5 } inactiveRuleAuthPw OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "auth password, string format or hex format. max length: string: 10 hex: 20 you can use '*' represents any one character or hexadecimal number" ::= { inactiveRuleEntry 6 } inactiveRuleAuthLoid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "auth loid, string format, max length: 24. you can use '*' represents any one character or hexadecimal number" ::= { inactiveRuleEntry 7 } inactiveRuleAuthLopw OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "auth logic password, string format, max length: 12. you can use '*' represents any one character or hexadecimal number" ::= { inactiveRuleEntry 8 } inactiveRuleAssignedSlot OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "slot id pre assigned. if not configed, its '-'." ::= { inactiveRuleEntry 9 } inactiveRuleAssignedPport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "pon port id pre assigned. if not configed, its '-'." ::= { inactiveRuleEntry 10 } inactiveRuleAssignedOnt OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "ont id pre assigned. if not configed, its '-'." ::= { inactiveRuleEntry 11 } inactiveRuleLineIndexesStr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "String joined by rule bind line indexes, such as '12,56,1023'. A rule can at most bind 8 line models." ::= { inactiveRuleEntry 12 } inactiveRuleDefaultLine OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-write STATUS current DESCRIPTION "The index of rule default line, should be inputted with <1-4096> The range is not always fit, please see range in commands." ::= { inactiveRuleEntry 13 } inactiveRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveRuleEntry 14 } inactiveRuleOnceOnSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveUniqueOnceOnSwitch: 0 always on(default) 1 once on." ::= { inactiveRuleEntry 15 } inactiveRuleOnceOnAgingTime OBJECT-TYPE SYNTAX INTEGER(0..168) MAX-ACCESS read-write STATUS current DESCRIPTION "aging time, hour, default value 0, means don't care aging time." ::= { inactiveRuleEntry 16 } inactiveRuleAuthSnFmt OBJECT-TYPE SYNTAX INTEGER { mix(0), hex(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Serial number format, mixed or hexadecimal." ::= { inactiveRuleEntry 17 } inactiveRuleAuthPwFmt OBJECT-TYPE SYNTAX INTEGER { string(0), hex(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Password format, string or hexadecimal." ::= { inactiveRuleEntry 18 } inactiveRuleOntStatus OBJECT-TYPE SYNTAX INTEGER { Unused(0), Inused(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ont status. 0: Ont has never been online 1: Ont online or offline" ::= { inactiveRuleEntry 19 } -- 1.1.2.7. inactiveUniqueConfig -------------------------- inactiveUniqueConfig OBJECT IDENTIFIER ::= { deployInactive 7 } -- 1.1.2.7.1. inactiveUniquePrimaryTable -- 1.1.2.7.2. inactiveUniqueSipAgentInfoTable -- 1.1.2.7.3. inactiveUniqueSipUserAddrTable -- 1.1.2.7.4. inactiveUniqueSipUserInfoTable -- 1.1.2.7.5. inactiveUniqueSipDigitMapTable -- 1.1.2.7.6. inactiveUniqueGemportTable -- 1.1.2.7.7. inactiveUniqueCportTable -- 1.1.2.7.8. inactiveUniqueEportTable -- 1.1.2.7.9. inactiveUniqueTcontTable -- 1.1.2.7.10. inactiveUniqueAlarmRefTable -- 1.1.2.7.11. inactiveUniqueManageTable -- 1.1.2.7.12. inactiveUniqueWanTable -- 1.1.2.7.1. inactiveUniquePrimaryTable ------------------ inactiveUniquePrimaryTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniquePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain unique primary table" ::= { inactiveUniqueConfig 1 } inactiveUniquePrimaryEntry OBJECT-TYPE SYNTAX InactiveUniquePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive unique primary table" INDEX { inactiveUniqueIndex } ::= { inactiveUniquePrimaryTable 1 } InactiveUniquePrimaryEntry ::= SEQUENCE { inactiveUniqueIndex INTEGER, inactiveUniqueName OCTET STRING, inactiveUniqueSignFlag INTEGER, inactiveUniqueSn OCTET STRING, inactiveUniqueLoid OCTET STRING, inactiveUniqueSlotId INTEGER, inactiveUniquePportId INTEGER, inactiveUniqueOntId INTEGER, inactiveUniqueOntDesc OCTET STRING, inactiveUniqueRowStatus RowStatus, inactiveUniqueOnceOnSwitch INTEGER, inactiveUniqueOnceOnAgingTime INTEGER, inactiveUniqueRangingBalance INTEGER } inactiveUniqueIndex OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniquePrimaryEntry 1 } inactiveUniqueName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "unique name, max length: 128." ::= { inactiveUniquePrimaryEntry 2 } inactiveUniqueSignFlag OBJECT-TYPE SYNTAX INTEGER(1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveUniqueSignFlag: 1 mode sn 2 mode loid 3 mode slot-id/pport-id/ont-id." ::= { inactiveUniquePrimaryEntry 3 } inactiveUniqueSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "unique sn, now only support string-hex format, not support hex format, max length: 13." ::= { inactiveUniquePrimaryEntry 4 } inactiveUniqueLoid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "unique loid, now only support string format, max length: 24." ::= { inactiveUniquePrimaryEntry 5 } inactiveUniqueSlotId OBJECT-TYPE SYNTAX INTEGER(0..0) MAX-ACCESS read-write STATUS current DESCRIPTION "slot id." ::= { inactiveUniquePrimaryEntry 6 } inactiveUniquePportId OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "pon port id." ::= { inactiveUniquePrimaryEntry 7 } inactiveUniqueOntId OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "ont id." ::= { inactiveUniquePrimaryEntry 8 } inactiveUniqueOntDesc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "ont description, max length: 128." ::= { inactiveUniquePrimaryEntry 9 } inactiveUniqueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveUniquePrimaryEntry 10 } inactiveUniqueOnceOnSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveUniqueOnceOnSwitch: 0 always on(default) 1 once on." ::= { inactiveUniquePrimaryEntry 11 } inactiveUniqueOnceOnAgingTime OBJECT-TYPE SYNTAX INTEGER(0..168) MAX-ACCESS read-write STATUS current DESCRIPTION "aging time, default value 0, means don't care aging time." ::= { inactiveUniquePrimaryEntry 12 } inactiveUniqueRangingBalance OBJECT-TYPE SYNTAX INTEGER(-10000..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "ranging balance, default value 0, unit: m." ::= { inactiveUniquePrimaryEntry 13 } -- 1.1.2.7.2. inactiveUniqueSipAgentInfoTable -------------- inactiveUniqueSipAgentInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniqueSipAgentInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain unique voip sip agent info table" ::= { inactiveUniqueConfig 2 } inactiveUniqueSipAgentInfoEntry OBJECT-TYPE SYNTAX InactiveUniqueSipAgentInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive unique voip sip agent info table" INDEX { inactiveUniqueIndexI } ::= { inactiveUniqueSipAgentInfoTable 1 } InactiveUniqueSipAgentInfoEntry ::= SEQUENCE { inactiveUniqueIndexI INTEGER, inactiveUniqueSipProxyServerIp OCTET STRING, inactiveUniqueSipOutboundProxyIp OCTET STRING, inactiveUniqueSipRegisterServerIp OCTET STRING, inactiveUniqueSipAgentInfoPort INTEGER, inactiveUniqueSipAgentInfoRowStatus RowStatus } inactiveUniqueIndexI OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniqueSipAgentInfoEntry 1 } inactiveUniqueSipProxyServerIp OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip agent info proxy server ip address." ::= { inactiveUniqueSipAgentInfoEntry 2 } inactiveUniqueSipOutboundProxyIp OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip agent info outbound proxy ip address." ::= { inactiveUniqueSipAgentInfoEntry 3 } inactiveUniqueSipRegisterServerIp OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip agent info register server ip address." ::= { inactiveUniqueSipAgentInfoEntry 4 } inactiveUniqueSipAgentInfoPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip agent info port." ::= { inactiveUniqueSipAgentInfoEntry 5 } inactiveUniqueSipAgentInfoRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveUniqueSipAgentInfoEntry 6 } -- 1.1.2.7.3. inactiveUniqueSipUserAddrTable -------------- inactiveUniqueSipUserAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniqueSipUserAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain unique voip sip user ip address table" ::= { inactiveUniqueConfig 3 } inactiveUniqueSipUserAddrEntry OBJECT-TYPE SYNTAX InactiveUniqueSipUserAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive unique voip sip user ip address table" INDEX { inactiveUniqueIndexII } ::= { inactiveUniqueSipUserAddrTable 1 } InactiveUniqueSipUserAddrEntry ::= SEQUENCE { inactiveUniqueIndexII INTEGER, inactiveUniqueSipuAddressIp IpAddress, inactiveUniqueSipuAddressMask IpAddress, inactiveUniqueSipuAddressVlan INTEGER, inactiveUniqueSipuAddressPri INTEGER, inactiveUniqueSipuAddressRowStatus RowStatus, inactiveUniqueSipuAddressGateway IpAddress, inactiveUniqueSipuAddressMasterDns IpAddress, inactiveUniqueSipuAddressSlaveDns IpAddress, inactiveUniqueSipuAddressHost INTEGER, inactiveUniqueSipuAddressMode INTEGER } inactiveUniqueIndexII OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniqueSipUserAddrEntry 1 } inactiveUniqueSipuAddressIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user ip address." ::= { inactiveUniqueSipUserAddrEntry 2 } inactiveUniqueSipuAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user mask." ::= { inactiveUniqueSipUserAddrEntry 3 } inactiveUniqueSipuAddressVlan OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user vlan." ::= { inactiveUniqueSipUserAddrEntry 4 } inactiveUniqueSipuAddressPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user priroty." ::= { inactiveUniqueSipUserAddrEntry 5 } inactiveUniqueSipuAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveUniqueSipUserAddrEntry 6 } inactiveUniqueSipuAddressGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user gateway." ::= { inactiveUniqueSipUserAddrEntry 7 } inactiveUniqueSipuAddressMasterDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user master DNS." ::= { inactiveUniqueSipUserAddrEntry 8 } inactiveUniqueSipuAddressSlaveDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user slave DNS." ::= { inactiveUniqueSipUserAddrEntry 9 } inactiveUniqueSipuAddressHost OBJECT-TYPE SYNTAX INTEGER(1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user host." ::= { inactiveUniqueSipUserAddrEntry 10 } inactiveUniqueSipuAddressMode OBJECT-TYPE SYNTAX INTEGER { static(0), dhcp(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user mode. 0(default): static ip mode; 1: dhcp mode." ::= { inactiveUniqueSipUserAddrEntry 11 } -- 1.1.2.7.4. inactiveUniqueSipUserInfoTable -------------- inactiveUniqueSipUserInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniqueSipUserInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain unique voip sip user infomation table" ::= { inactiveUniqueConfig 4 } inactiveUniqueSipUserInfoEntry OBJECT-TYPE SYNTAX InactiveUniqueSipUserInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of unique voip sip user infomation table" INDEX { inactiveUniqueIndexIII, inactiveUniqueSipuInfoIndex } ::= { inactiveUniqueSipUserInfoTable 1 } InactiveUniqueSipUserInfoEntry ::= SEQUENCE { inactiveUniqueIndexIII INTEGER, inactiveUniqueSipuInfoIndex INTEGER, inactiveUniqueSipuInfoUserName OCTET STRING, inactiveUniqueSipuInfoPassword OCTET STRING, inactiveUniqueSipuInfoTelephone OCTET STRING, inactiveUniqueSipuInfoRowStatus RowStatus } inactiveUniqueIndexIII OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniqueSipUserInfoEntry 1 } inactiveUniqueSipuInfoIndex OBJECT-TYPE SYNTAX INTEGER(1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of voip sip user info, the 2nd index of this table. Should in <1-2>." ::= { inactiveUniqueSipUserInfoEntry 2 } inactiveUniqueSipuInfoUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user infomation user name, max length: 25." ::= { inactiveUniqueSipUserInfoEntry 3 } inactiveUniqueSipuInfoPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user infomation user name, max length: 25." ::= { inactiveUniqueSipUserInfoEntry 4 } inactiveUniqueSipuInfoTelephone OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip user infomation user name, max length: 25." ::= { inactiveUniqueSipUserInfoEntry 5 } inactiveUniqueSipuInfoRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveUniqueSipUserInfoEntry 6 } -- 1.1.2.7.5. inactiveUniqueSipDigitMapTable -------------- inactiveUniqueSipDigitMapTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniqueSipDigitMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain unique voip sip digit map table" ::= { inactiveUniqueConfig 5 } inactiveUniqueSipDigitMapEntry OBJECT-TYPE SYNTAX InactiveUniqueSipDigitMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive unique voip sip digit map table" INDEX { inactiveUniqueIndexIV, inactiveUniqueSipdMapIndex } ::= { inactiveUniqueSipDigitMapTable 1 } InactiveUniqueSipDigitMapEntry ::= SEQUENCE { inactiveUniqueIndexIV INTEGER, inactiveUniqueSipdMapIndex INTEGER, inactiveUniqueSipdMapDialPlanToken OCTET STRING, inactiveUniqueSipdMapRowStatus RowStatus } inactiveUniqueIndexIV OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniqueSipDigitMapEntry 1 } inactiveUniqueSipdMapIndex OBJECT-TYPE SYNTAX INTEGER(1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of voip digit map, the 2nd index of this table. Should in <1-10>." ::= { inactiveUniqueSipDigitMapEntry 2 } inactiveUniqueSipdMapDialPlanToken OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..28)) MAX-ACCESS read-write STATUS current DESCRIPTION "voip sip digit map dial plan token, max length: 28." ::= { inactiveUniqueSipDigitMapEntry 3 } inactiveUniqueSipdMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveUniqueSipDigitMapEntry 4 } -- 1.1.2.7.6. inactiveUniqueGemportTable -------------------- inactiveUniqueGemportTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniqueGemportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain unique gemport table." ::= { inactiveUniqueConfig 6 } inactiveUniqueGemportEntry OBJECT-TYPE SYNTAX InactiveUniqueGemportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive unique gemport table" INDEX { inactiveUniqueIndexV, inactiveUniqueGemportIndex } ::= { inactiveUniqueGemportTable 1 } InactiveUniqueGemportEntry ::= SEQUENCE { inactiveUniqueIndexV INTEGER, inactiveUniqueGemportIndex INTEGER, inactiveUniqueGemportVlanProfileId INTEGER, inactiveUniqueGemportUsProfileId INTEGER, inactiveUniqueGemportDsProfileId INTEGER, inactiveUniqueGemportRowStatus RowStatus } inactiveUniqueIndexV OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniqueGemportEntry 1 } inactiveUniqueGemportIndex OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of gemport, the 2nd index of this table. Should in <1-24>." ::= { inactiveUniqueGemportEntry 2 } inactiveUniqueGemportVlanProfileId OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport vlan profile id, should be inputted with <0-4095>." ::= { inactiveUniqueGemportEntry 3 } inactiveUniqueGemportUsProfileId OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport us traffic profile id, should be inputted with <0-4095>." ::= { inactiveUniqueGemportEntry 4 } inactiveUniqueGemportDsProfileId OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The gemport ds traffic profile id, should be inputted with <0-4095>." ::= { inactiveUniqueGemportEntry 5 } inactiveUniqueGemportRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveUniqueGemportEntry 6 } -- 1.1.2.7.7. inactiveUniqueCportTable -------------------- inactiveUniqueCportTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniqueCportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain unique catv port management table." ::= { inactiveUniqueConfig 7 } inactiveUniqueCportEntry OBJECT-TYPE SYNTAX InactiveUniqueCportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive unique catv port management table" INDEX { inactiveUniqueIndexVI, inactiveUniqueCportIndex } ::= { inactiveUniqueCportTable 1 } InactiveUniqueCportEntry ::= SEQUENCE { inactiveUniqueIndexVI INTEGER, inactiveUniqueCportIndex INTEGER, inactiveUniqueCportSwitch INTEGER, inactiveUniqueCportAgcMode INTEGER, inactiveUniqueCportAgcRange INTEGER } inactiveUniqueIndexVI OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniqueCportEntry 1 } inactiveUniqueCportIndex OBJECT-TYPE SYNTAX INTEGER(1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of catv port management, the 2nd index of this table. Should in <1-4>." ::= { inactiveUniqueCportEntry 2 } inactiveUniqueCportSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveUniqueCportSwitch: 0 disable 1 enable(default)" ::= { inactiveUniqueCportEntry 3 } inactiveUniqueCportAgcMode OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveUniqueCportAgcMode: 0 No AGC 1 Broadband RF AGC 2 Optical AGC" ::= { inactiveUniqueCportEntry 4 } inactiveUniqueCportAgcRange OBJECT-TYPE SYNTAX INTEGER(-120..60) MAX-ACCESS read-write STATUS current DESCRIPTION "catv port agc range, default: 0." ::= { inactiveUniqueCportEntry 5 } -- 1.1.2.7.8. inactiveUniqueEportTable -------------------- inactiveUniqueEportTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniqueEportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain unique ethernet port management table." ::= { inactiveUniqueConfig 8 } inactiveUniqueEportEntry OBJECT-TYPE SYNTAX InactiveUniqueEportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive unique ethernet port management table" INDEX { inactiveUniqueIndexVII, inactiveUniqueEportIndex } ::= { inactiveUniqueEportTable 1 } InactiveUniqueEportEntry ::= SEQUENCE { inactiveUniqueIndexVII INTEGER, inactiveUniqueEportIndex INTEGER, inactiveUniqueEportSwitch INTEGER, inactiveUniqueEportNegMode INTEGER } inactiveUniqueIndexVII OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniqueEportEntry 1 } inactiveUniqueEportIndex OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ethernet port management, the 2nd index of this table. Should in <1-8>." ::= { inactiveUniqueEportEntry 2 } inactiveUniqueEportSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveUniqueEportSwitch: 0 enable(default) 1 disable" ::= { inactiveUniqueEportEntry 3 } -- 暂时尚未实现 inactiveUniqueEportNegMode OBJECT-TYPE SYNTAX INTEGER(0..23) MAX-ACCESS read-write STATUS current DESCRIPTION "neg mode contains duplex and speed. duplex: 0 auto, 1 full, 2 half speed: 0 auto, 1 10M, 2 100M, 3 1000M neg mode = duplex * 10 + speed. neg mode value 0 means auto duplex auto speed, value 11 means full duplex 10M, and so on." -- 模式和速率需要同时配，不想用比较麻烦的 rowstatus，用一个节点搞定算了。 -- 个位数是速率，十位数是双工模式。例如：千兆半双工就是 23 ::= { inactiveUniqueEportEntry 4 } -- 1.1.2.7.9. inactiveUniqueTcontTable ---------------------- inactiveUniqueTcontTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniqueTcontEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain unique tcont table, now only for tcont bind dba." ::= { inactiveUniqueConfig 9 } inactiveUniqueTcontEntry OBJECT-TYPE SYNTAX InactiveUniqueTcontEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive unique tcont table" INDEX { inactiveUniqueIndexVIII, inactiveUniqueTcontIndex } ::= { inactiveUniqueTcontTable 1 } InactiveUniqueTcontEntry ::= SEQUENCE { inactiveUniqueIndexVIII INTEGER, inactiveUniqueTcontIndex INTEGER, inactiveUniqueTcontDbaIndex INTEGER, inactiveUniqueTcontRowStatus RowStatus } inactiveUniqueIndexVIII OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniqueTcontEntry 1 } inactiveUniqueTcontIndex OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of tcont, the 2nd index of this table. Should in <1-8>." ::= { inactiveUniqueTcontEntry 2 } inactiveUniqueTcontDbaIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "The index of tcont bind dba, should be inputted with <0-127>." ::= { inactiveUniqueTcontEntry 3 } inactiveUniqueTcontRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveUniqueTcontEntry 4 } -- 1.1.2.7.10. inactiveUniqueAlarmRefTable -------------------- inactiveUniqueAlarmRefTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniqueAlarmRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive unique alarm Reference table." ::= { inactiveUniqueConfig 10 } inactiveUniqueAlarmRefEntry OBJECT-TYPE SYNTAX InactiveUniqueAlarmRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive unique alarm Reference table" INDEX { inactiveUniqueAlarmRefUIndex } ::= { inactiveUniqueAlarmRefTable 1 } InactiveUniqueAlarmRefEntry ::= SEQUENCE { inactiveUniqueAlarmRefUIndex INTEGER, inactiveUniqueAlarmRefAIndex INTEGER, inactiveUniqueAlarmRefAName OCTET STRING, inactiveUniqueAlarmRefRowStatus RowStatus } inactiveUniqueAlarmRefUIndex OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniqueAlarmRefEntry 1 } inactiveUniqueAlarmRefAIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-create STATUS current DESCRIPTION "The index of alarm table to reference, Should in <0-127>." ::= { inactiveUniqueAlarmRefEntry 2 } inactiveUniqueAlarmRefAName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The entry name of alarm table to reference, Should in <1-128>." ::= { inactiveUniqueAlarmRefEntry 3 } inactiveUniqueAlarmRefRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of inactive unique alarm Reference table." ::= { inactiveUniqueAlarmRefEntry 4 } -- 1.1.2.7.11. inactiveUniqueManageTable inactiveUniqueManageTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniqueManageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive unique management table." ::= { inactiveUniqueConfig 11 } inactiveUniqueManageEntry OBJECT-TYPE SYNTAX InactiveUniqueManageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive unique management table" INDEX { inactiveUniqueManageIndex } ::= { inactiveUniqueManageTable 1 } InactiveUniqueManageEntry ::= SEQUENCE { inactiveUniqueManageIndex INTEGER, inactiveUniqueManageProtocolPort80 INTEGER } inactiveUniqueManageIndex OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniqueManageEntry 1 } inactiveUniqueManageProtocolPort80 OBJECT-TYPE SYNTAX INTEGER { disable_discard(0), disable_forward(1), enable_discard(2), enable_forward(3), init(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "set protocol-port-80 disable mode discard or enable mode forward." ::= { inactiveUniqueManageEntry 2 } -- 1.1.2.7.12. inactiveUniqueWanTable inactiveUniqueWanTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveUniqueWanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive unique wan table." ::= { inactiveUniqueConfig 12 } inactiveUniqueWanEntry OBJECT-TYPE SYNTAX InactiveUniqueWanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive unique wan table" INDEX { inactiveUniqueWanIndex, inactiveUniqueWanNo } ::= { inactiveUniqueWanTable 1 } InactiveUniqueWanEntry ::= SEQUENCE { inactiveUniqueWanIndex INTEGER, inactiveUniqueWanNo INTEGER, inactiveUniqueWanMode INTEGER, inactiveUniqueWanVlan INTEGER, inactiveUniqueWanPriority INTEGER, inactiveUniqueWanPppoeUsername OCTET STRING, inactiveUniqueWanPppoePassword OCTET STRING, inactiveUniqueWanPppoeSerName OCTET STRING, inactiveUniqueWanPppoeAuthMode INTEGER, inactiveUniqueWanPppoeConnMode INTEGER, inactiveUniqueWanPppoeNat INTEGER, inactiveUniqueWanPppoeReleTime INTEGER, inactiveUniqueWanStaticIp IpAddress, inactiveUniqueWanStaticMask IpAddress, inactiveUniqueWanStaticGateway IpAddress, inactiveUniqueWanStaticMasterDns IpAddress, inactiveUniqueWanStaticSlaveDns IpAddress, inactiveUniqueWanRowStatus RowStatus } inactiveUniqueWanIndex OBJECT-TYPE SYNTAX INTEGER(0..2047) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands." ::= { inactiveUniqueWanEntry 1 } inactiveUniqueWanNo OBJECT-TYPE SYNTAX INTEGER(1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index of this table, should be inputted with <1-4>." ::= { inactiveUniqueWanEntry 2 } inactiveUniqueWanMode OBJECT-TYPE SYNTAX INTEGER { pppoe(1), dhcp(2), static_ip(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan mode of this table, should be inputted with <1-3>." ::= { inactiveUniqueWanEntry 3 } inactiveUniqueWanVlan OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan vlan of this table, should be inputted with <1-4094>. 0 - Initial value and cannot be set to this value. 1..4094 - Valid Settings." ::= { inactiveUniqueWanEntry 4 } inactiveUniqueWanPriority OBJECT-TYPE SYNTAX INTEGER(0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan vlan priority of this table, should be inputted with <0-7>. 0..7 - Valid Settings. 8 - Initial value and cannot be set to this value." ::= { inactiveUniqueWanEntry 5 } inactiveUniqueWanPppoeUsername OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan pppoe mode user name of this table. 0 - Initial len and cannot be set to this len. 1..128 - Valid Settings." ::= { inactiveUniqueWanEntry 6 } inactiveUniqueWanPppoePassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan pppoe mode password of this table. 0 - Initial len and cannot be set to this len. 1..25 - Valid Settings." ::= { inactiveUniqueWanEntry 7 } inactiveUniqueWanPppoeSerName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan pppoe mode service name of this table. 0 - Initial len and cannot be set to this len. 1..128 - Valid Settings." ::= { inactiveUniqueWanEntry 8 } inactiveUniqueWanPppoeAuthMode OBJECT-TYPE SYNTAX INTEGER { auto(0), chap(1), pap(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan pppoe mode authentication mode of this table. 0 - auto (the default) 1 - chap 2 - pap" ::= { inactiveUniqueWanEntry 9 } inactiveUniqueWanPppoeConnMode OBJECT-TYPE SYNTAX INTEGER { always(0), demand(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan pppoe mode connection mode of this table. 0 - always (the default) 1 - demand" ::= { inactiveUniqueWanEntry 10 } inactiveUniqueWanPppoeNat OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan pppoe mode NAT of this table. 0 - disable 1 - enable(the default)" ::= { inactiveUniqueWanEntry 11 } inactiveUniqueWanPppoeReleTime OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan pppoe mode release time of this table, should be inputted with <1-65535>. 0 - Initial value and cannot be set to this value. 1..65535 - Valid Settings." ::= { inactiveUniqueWanEntry 12 } inactiveUniqueWanStaticIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan static ip mode ip address of this table." ::= { inactiveUniqueWanEntry 13 } inactiveUniqueWanStaticMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan static ip mode ip mask of this table." ::= { inactiveUniqueWanEntry 14 } inactiveUniqueWanStaticGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan static ip mode ip gateway of this table." ::= { inactiveUniqueWanEntry 15 } inactiveUniqueWanStaticMasterDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan static ip mode master DNS of this table." ::= { inactiveUniqueWanEntry 16 } inactiveUniqueWanStaticSlaveDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The unique wan static ip mode slave DNS of this table." ::= { inactiveUniqueWanEntry 17 } inactiveUniqueWanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveUniqueWanEntry 18 } -- 1.1.2.8. inactiveCtrlMcastConfig -------------------------- inactiveCtrlMcastConfig OBJECT IDENTIFIER ::= { deployInactive 8 } -- 1.1.2.8.1. inactiveCtrlMcastTable -- 1.1.2.8.2. inactiveCtrlMcastOntTable -- 1.1.2.8.1. inactiveCtrlMcastTable -------------------------- inactiveCtrlMcastTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveCtrlMcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive control multicast table." ::= { inactiveCtrlMcastConfig 1 } inactiveCtrlMcastEntry OBJECT-TYPE SYNTAX InactiveCtrlMcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive control muticast table" INDEX { inactiveCtrlMcastIndex } ::= { inactiveCtrlMcastTable 1 } InactiveCtrlMcastEntry ::= SEQUENCE { inactiveCtrlMcastIndex INTEGER, inactiveCtrlMcastName OCTET STRING, inactiveCtrlMcastRowStatus RowStatus } inactiveCtrlMcastIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of inactive control multicast table, should be inputted with <0-127>. The range is not always fit, please see range in commands." ::= { inactiveCtrlMcastEntry 1 } inactiveCtrlMcastName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "name of inactive control multicast entry." ::= { inactiveCtrlMcastEntry 2 } inactiveCtrlMcastRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveCtrlMcastEntry 3 } -- 1.1.2.8.2. inactiveCtrlMcastOntTable ------------------------ inactiveCtrlMcastOntTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveCtrlMcastOntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive domain control multicast base ont table." ::= { inactiveCtrlMcastConfig 2 } inactiveCtrlMcastOntEntry OBJECT-TYPE SYNTAX InactiveCtrlMcastOntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive control multicast base ont table" INDEX { inactiveCtrlMcastIndexI, inactiveCtrlMcastEntryIndex } ::= { inactiveCtrlMcastOntTable 1 } InactiveCtrlMcastOntEntry ::= SEQUENCE { inactiveCtrlMcastIndexI INTEGER, inactiveCtrlMcastEntryIndex INTEGER, inactiveCtrlMcastAccessType INTEGER, inactiveCtrlMcastVid INTEGER, inactiveCtrlMcastSrcIp IpAddress, inactiveCtrlMcastDstStartIp IpAddress, inactiveCtrlMcastDstEndIp IpAddress, inactiveCtrlMcastGroupBw INTEGER, inactiveCtrlMcastDurationTimes INTEGER, inactiveCtrlMcastNumOfTimes INTEGER, inactiveCtrlMcastTimeInterval INTEGER, inactiveCtrlMcastResetTime INTEGER, inactiveCtrlMcastNport INTEGER, inactiveCtrlMcastOntRowStatus RowStatus } inactiveCtrlMcastIndexI OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of control multicast profile. Should in <0-127>." ::= { inactiveCtrlMcastOntEntry 1 } inactiveCtrlMcastEntryIndex OBJECT-TYPE SYNTAX INTEGER(0..31) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of control multicast entry, the 2nd index of this table. Should in <0-31>." ::= { inactiveCtrlMcastOntEntry 2 } inactiveCtrlMcastAccessType OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "inactiveCtrlMcastAccessType: 0 del one entry 1 clear all entry 2 add permit entry 3 add preview entry" ::= { inactiveCtrlMcastOntEntry 3 } inactiveCtrlMcastVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "control multicast vlan id, should be <1-4094>." ::= { inactiveCtrlMcastOntEntry 4 } inactiveCtrlMcastSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "control multicast source ip address." ::= { inactiveCtrlMcastOntEntry 5 } inactiveCtrlMcastDstStartIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "control multicast destination start ip address." ::= { inactiveCtrlMcastOntEntry 6 } inactiveCtrlMcastDstEndIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "control multicast destination end ip address." ::= { inactiveCtrlMcastOntEntry 7 } inactiveCtrlMcastGroupBw OBJECT-TYPE SYNTAX INTEGER(1..1024000) MAX-ACCESS read-write STATUS current DESCRIPTION "control multicast group bandwidth, should be <1-1024000>." ::= { inactiveCtrlMcastOntEntry 8 } inactiveCtrlMcastDurationTimes OBJECT-TYPE SYNTAX INTEGER(10..6000) MAX-ACCESS read-write STATUS current DESCRIPTION "control multicast duration times, should be <10-6000>." ::= { inactiveCtrlMcastOntEntry 9 } inactiveCtrlMcastNumOfTimes OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "control multicast number of times, should be <1-255>." ::= { inactiveCtrlMcastOntEntry 10 } inactiveCtrlMcastTimeInterval OBJECT-TYPE SYNTAX INTEGER(1..7200) MAX-ACCESS read-write STATUS current DESCRIPTION "control multicast time interval, should be <1-7200>." ::= { inactiveCtrlMcastOntEntry 11 } inactiveCtrlMcastResetTime OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-write STATUS current DESCRIPTION "control multicast reset time o'clock, should be <1-24>." ::= { inactiveCtrlMcastOntEntry 12 } inactiveCtrlMcastNport OBJECT-TYPE SYNTAX INTEGER(1..25) MAX-ACCESS read-write STATUS current DESCRIPTION "ethernet port number 1-24 of the entry assigned, default 25 means ctrl mcast base ont." ::= { inactiveCtrlMcastOntEntry 13 } inactiveCtrlMcastOntRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { inactiveCtrlMcastOntEntry 14 } -- 1.1.2.9. inactiveCtrlAlarmConfig -------------------------- inactiveCtrlAlarmConfig OBJECT IDENTIFIER ::= { deployInactive 9 } -- 1.1.2.9.1. inactiveCtrlAlarmTable -- 1.1.2.9.2. inactiveCtrlAlarmThrldTable -- 1.1.2.9.1. inactiveCtrlAlarmTable -------------------------- inactiveCtrlAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveCtrlAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive control alarm table." ::= { inactiveCtrlAlarmConfig 1 } inactiveCtrlAlarmEntry OBJECT-TYPE SYNTAX InactiveCtrlAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive control alarm table" INDEX { inactiveCtrlAlarmAimIndex } ::= { inactiveCtrlAlarmTable 1 } InactiveCtrlAlarmEntry ::= SEQUENCE { inactiveCtrlAlarmAimIndex INTEGER, inactiveCtrlAlarmAimName OCTET STRING, inactiveCtrlAlarmReferLine OCTET STRING, inactiveCtrlAlarmReferUnique OCTET STRING, inactiveCtrlAlarmRowStatus RowStatus } inactiveCtrlAlarmAimIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of inactive control alarm table, should be <0-127>. The range is not always fit, please see range in commands." ::= { inactiveCtrlAlarmEntry 1 } inactiveCtrlAlarmAimName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "the name of aim." ::= { inactiveCtrlAlarmEntry 2 } inactiveCtrlAlarmReferLine OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Line bitmap, each line references this aim." ::= { inactiveCtrlAlarmEntry 3 } inactiveCtrlAlarmReferUnique OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unique bitmap, each unique references this aim." ::= { inactiveCtrlAlarmEntry 4 } inactiveCtrlAlarmRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The inactive control alarm table rowStatus." ::= { inactiveCtrlAlarmEntry 5 } -- 1.1.2.9.2. inactiveCtrlAlarmThrldTable -------------------------- inactiveCtrlAlarmThrldTable OBJECT-TYPE SYNTAX SEQUENCE OF InactiveCtrlAlarmThrldEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "inactive control alarm threshold table." ::= { inactiveCtrlAlarmConfig 2 } inactiveCtrlAlarmThrldEntry OBJECT-TYPE SYNTAX InactiveCtrlAlarmThrldEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of inactive control alarm threshold table" INDEX { inactiveCtrlAlarmThrldAimIndex, inactiveCtrlAlarmThrldRxOrTx} ::= { inactiveCtrlAlarmThrldTable 1 } InactiveCtrlAlarmThrldEntry ::= SEQUENCE { inactiveCtrlAlarmThrldAimIndex INTEGER, inactiveCtrlAlarmThrldRxOrTx INTEGER, inactiveCtrlAlarmThrldHigh INTEGER, inactiveCtrlAlarmThrldLow INTEGER } inactiveCtrlAlarmThrldAimIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of inactive control alarm threshold table, should be <0-127>. The range is not always fit, please see range in commands." ::= { inactiveCtrlAlarmThrldEntry 1 } inactiveCtrlAlarmThrldRxOrTx OBJECT-TYPE SYNTAX INTEGER { none(0), rx(1), tx(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The secend index of inactive control alarm threshold entry." ::= { inactiveCtrlAlarmThrldEntry 2 } inactiveCtrlAlarmThrldHigh OBJECT-TYPE SYNTAX INTEGER(0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The high threshold of rx or tx alarm, The actual value is half the input value, if the threshold is rx, the actual value is the opposite." ::= { inactiveCtrlAlarmThrldEntry 3 } inactiveCtrlAlarmThrldLow OBJECT-TYPE SYNTAX INTEGER(0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The low threshold of rx or tx alarm, The actual value is half the input value, if the threshold is rx, the actual value is the opposite." ::= { inactiveCtrlAlarmThrldEntry 4 } -- 1.1.3. deployActive ---------------------------------- deployActive OBJECT IDENTIFIER ::= { configDevice 3 } -- 1.1.3.1. activeAuthTable -- 1.1.3.2. activeDbaTable -- 1.1.3.3. activeLineCommonConfig -- 1.1.3.4. activeLineSFUConfig -- 1.1.3.5. activeLineHGUConfig -- 1.1.3.6. activeRuleTable -- 1.1.3.7. activeUniqueConfig -- 1.1.3.1. activeAuthTable ------------------------------ activeAuthTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain auth table" ::= { deployActive 1 } activeAuthEntry OBJECT-TYPE SYNTAX ActiveAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active auth table" INDEX { activeAuthIndex } ::= { activeAuthTable 1 } ActiveAuthEntry ::= SEQUENCE { activeAuthIndex INTEGER, activeAuthDescription OCTET STRING, activeAuthMode INTEGER, activeAuthSn OCTET STRING, activeAuthPw OCTET STRING, activeAuthLoid OCTET STRING, activeAuthLopw OCTET STRING, activeAuthAssignedSlot OCTET STRING, activeAuthAssignedPport OCTET STRING, activeAuthAssignedOnt OCTET STRING } activeAuthIndex OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of active auth table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { activeAuthEntry 1 } activeAuthDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "auth description, max length: 128." ::= { activeAuthEntry 2 } activeAuthMode OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "activeAuthMode: 0 auth mode sn 1 auth mode pw 2 auth mode sn_pw 3 auth mode loid 4 auth mode lopw 5 auth mode loid_lopw" ::= { activeAuthEntry 3 } activeAuthSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "auth sn, string-hex, max length: 16." ::= { activeAuthEntry 4 } activeAuthPw OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "auth password, string, max length: 20." ::= { activeAuthEntry 5 } activeAuthLoid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "auth loid, max length: 24." ::= { activeAuthEntry 6 } activeAuthLopw OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "auth logic password, max length: 12." ::= { activeAuthEntry 7 } activeAuthAssignedSlot OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "slot id pre assigned. if not configed, its '-'." ::= { activeAuthEntry 8 } activeAuthAssignedPport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "pon port id pre assigned. if not configed, its '-'." ::= { activeAuthEntry 9 } activeAuthAssignedOnt OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont id pre assigned. if not configed, its '-'." ::= { activeAuthEntry 10 } -- 1.1.3.2. activeDbaTable ------------------------------ activeDbaTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveDbaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain dba table" ::= { deployActive 2 } activeDbaEntry OBJECT-TYPE SYNTAX ActiveDbaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active dba table" INDEX { activeDbaIndex } ::= { activeDbaTable 1 } ActiveDbaEntry ::= SEQUENCE { activeDbaIndex INTEGER, activeDbaDescription OCTET STRING, activeDbaType INTEGER, activeDbaFixBandwidth INTEGER, activeDbaAssuredBandwidth INTEGER, activeDbaMaxBandwidth INTEGER } activeDbaIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of active dba table, should be inputted with <0-127>." ::= { activeDbaEntry 1 } activeDbaDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "active dba description, max length: 128." ::= { activeDbaEntry 2 } activeDbaType OBJECT-TYPE SYNTAX INTEGER(1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "activeDbaType, 1 fixed bandwidth 2 assured bandwidth 3 assured and max bandwidth 4 max bandwidth 5 fixed and assured and max bandwidth" ::= { activeDbaEntry 3 } activeDbaFixBandwidth OBJECT-TYPE SYNTAX INTEGER(128..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "Must to be divisible by 64kbps, must not less than 128 kbps." ::= { activeDbaEntry 4 } activeDbaAssuredBandwidth OBJECT-TYPE SYNTAX INTEGER(0..1310592) MAX-ACCESS read-only STATUS current DESCRIPTION "Must to be divisible by 64kbps, Can be 0. If not 0, it must be at least 256 kbps." ::= { activeDbaEntry 5 } activeDbaMaxBandwidth OBJECT-TYPE SYNTAX INTEGER(0..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "Must to be divisible by 64kbps, and must not be less than the sum of assured BW plus fixedBW. Must less than 1310720 kbps" ::= { activeDbaEntry 6 } -- 1.1.3.3. activeLineCommonConfig ---------------------- activeLineCommonConfig OBJECT IDENTIFIER ::= { deployActive 3 } -- 1.1.3.3.1. activeLinePrimaryTable -- 1.1.3.3.2. activeLineTcontTable -- 1.1.3.3.3. activeLineGemportTable -- 1.1.3.3.4. activeLineFlowmappingTable -- 1.1.3.3.5. activeLineAttrMgmtTable -- 1.1.3.3.1. activeLinePrimaryTable -------------------- activeLinePrimaryTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveLinePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain line primary table" ::= { activeLineCommonConfig 1 } activeLinePrimaryEntry OBJECT-TYPE SYNTAX ActiveLinePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active line primary table" INDEX { activeLineIndex } ::= { activeLinePrimaryTable 1 } ActiveLinePrimaryEntry ::= SEQUENCE { activeLineIndex INTEGER, activeLineDeviceType OCTET STRING, activeLineDescription OCTET STRING, activeLineTrafficMode INTEGER, activeLineMappingMode INTEGER } activeLineIndex OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { activeLinePrimaryEntry 1 } activeLineDeviceType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(7..7)) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineDeviceType: c30-214 2ETH(1ETH+1iTV)+1POTS SFU c30-400 4ETH SFU c30-401 4ETH+WIFI HGU c30-420 4ETH+2POTS SFU c30-423 4ETH+2POTS+WIFI+USB HGU c31-423 4ETH+2POTS+WIFI+USB HGU+SFU c40-100 1ETH SFU c40-201 2ETH+WIFI HGU c40-210 1GE+1FE+1POTS HGU c40-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU d10-423 4ETH+2POTS+WIFI+USB HGU f10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU h60-100 1ETH SFU l30-100 1ETH SFU l30-210 2ETH+1POTS SFU m50-420 4ETH+2POTS SFU n20-100 1ETH SFU n20-400 4ETH SFU n40-100 1ETH SFU s10-214 2ETH(1ETH+1iTV)+1POTS HGU s30-100 1ETH SFU t10-100 1ETH SFU t10-214 2ETH(1ETH+1iTV)+1POTS SFU t10-403 4ETH+WIFI+USB HGU t10-420 4ETH+2POTS SFU t10-423 4ETH+2POTS+WIFI+USB HGU t10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU t60-100 1ETH SFU" ::= { activeLinePrimaryEntry 2 } activeLineDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "line description, max length: 128." ::= { activeLinePrimaryEntry 3 } activeLineTrafficMode OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineTrafficMode: 0 pri-queue: priority queue scheduling 1 gem-car: GEM traffic control" ::= { activeLinePrimaryEntry 4 } activeLineMappingMode OBJECT-TYPE SYNTAX INTEGER(0..6) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineMappingMode: 0 vlan 1 priority 2 vlan-priority 3 port 4 port-vlan 5 port-priority 6 port-vlan-priority" ::= { activeLinePrimaryEntry 5 } -- 1.1.3.3.2. activeLineTcontTable ---------------------- activeLineTcontTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveLineTcontEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain line tcont table, now only for tcont bind dba." ::= { activeLineCommonConfig 2 } activeLineTcontEntry OBJECT-TYPE SYNTAX ActiveLineTcontEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active line tcont table" INDEX { activeLineIndexI, activeLineTcontIndex } ::= { activeLineTcontTable 1 } ActiveLineTcontEntry ::= SEQUENCE { activeLineIndexI INTEGER, activeLineTcontIndex INTEGER, activeLineTcontDbaIndex INTEGER } activeLineIndexI OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { activeLineTcontEntry 1 } activeLineTcontIndex OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of tcont, the 2nd index of this table. Should in <1-8>." ::= { activeLineTcontEntry 2 } activeLineTcontDbaIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of tcont bind dba, should be inputted with <0-127>." ::= { activeLineTcontEntry 3 } -- 1.1.3.3.3. activeLineGemportTable -------------------- activeLineGemportTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveLineGemportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain line gemport table." ::= { activeLineCommonConfig 3 } activeLineGemportEntry OBJECT-TYPE SYNTAX ActiveLineGemportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active line gemport table" INDEX { activeLineIndexII, activeLineGemportIndex } ::= { activeLineGemportTable 1 } ActiveLineGemportEntry ::= SEQUENCE { activeLineIndexII INTEGER, activeLineGemportIndex INTEGER, activeLineGemportVpStagged INTEGER, activeLineGemportSvid INTEGER, activeLineGemportPriority INTEGER, activeLineGemportTcontId INTEGER, activeLineGemportPq INTEGER, activeLineGemportCir INTEGER, activeLineGemportPir INTEGER, activeLineGemportCbs INTEGER, activeLineGemportPbs INTEGER } activeLineIndexII OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { activeLineGemportEntry 1 } activeLineGemportIndex OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of gemport, the 2nd index of this table. Should in <1-24>." ::= { activeLineGemportEntry 2 } activeLineGemportVpStagged OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineGemportVpStagged: 0 false 1 true" ::= { activeLineGemportEntry 3 } activeLineGemportSvid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport service vlan index, should be inputted with <1-4094>." ::= { activeLineGemportEntry 4 } activeLineGemportPriority OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport priority, should be inputted with <0-7>. Now not use." ::= { activeLineGemportEntry 5 } activeLineGemportTcontId OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport bind tcont index, should be inputted with <1-8>." ::= { activeLineGemportEntry 6 } activeLineGemportPq OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport priority queue, should be inputted with <0-7>." ::= { activeLineGemportEntry 7 } activeLineGemportCir OBJECT-TYPE SYNTAX INTEGER(64..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport committed infomation rate, should be inputted with <64-10240000>. must to be divisible by 64kbps,must not less than 64 kbps." ::= { activeLineGemportEntry 8 } activeLineGemportPir OBJECT-TYPE SYNTAX INTEGER(64..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport peek infomation rate, should be inputted with <64-10240000>. must to be divisible by 64kbps,must not less than 64 kbps." ::= { activeLineGemportEntry 9 } activeLineGemportCbs OBJECT-TYPE SYNTAX INTEGER(2000..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport committed burst size, should be inputted with <2000-10240000>." ::= { activeLineGemportEntry 10 } activeLineGemportPbs OBJECT-TYPE SYNTAX INTEGER(2000..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport peek burst size, should be inputted with <2000-10240000>." ::= { activeLineGemportEntry 11 } -- 1.1.3.3.4. activeLineFlowmappingTable ---------------- activeLineFlowmappingTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveLineFlowmappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain line flow mapping table." ::= { activeLineCommonConfig 4 } activeLineFlowmappingEntry OBJECT-TYPE SYNTAX ActiveLineFlowmappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active line flow mapping table" INDEX { activeLineIndexIII, activeLineFlowmappingIndex } ::= { activeLineFlowmappingTable 1 } ActiveLineFlowmappingEntry ::= SEQUENCE { activeLineIndexIII INTEGER, activeLineFlowmappingIndex INTEGER, activeLineFlowmappingVid INTEGER, activeLineFlowmappingPriority INTEGER, activeLineFlowmappingEthport INTEGER, activeLineFlowmappingGemport INTEGER, activeLineFlowmappingType INTEGER } activeLineIndexIII OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { activeLineFlowmappingEntry 1 } activeLineFlowmappingIndex OBJECT-TYPE SYNTAX INTEGER(1..48) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of flowmapping, the 2nd index of this table. Should in <1-48>. The range is not always fit, please see range in commands." ::= { activeLineFlowmappingEntry 2 } activeLineFlowmappingVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The flow mapping vid, should be inputted with <1-4094>." ::= { activeLineFlowmappingEntry 3 } activeLineFlowmappingPriority OBJECT-TYPE SYNTAX INTEGER(0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The flow mapping priority, should be inputted with <0-8>. Value 8 means don't care 802.1p priority." ::= { activeLineFlowmappingEntry 4 } activeLineFlowmappingEthport OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The flow mapping ethernet port id, should be inputted with <1-8>." ::= { activeLineFlowmappingEntry 5 } activeLineFlowmappingGemport OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-only STATUS current DESCRIPTION "The flow mapping gem port id, should be inputted with <1-24>." ::= { activeLineFlowmappingEntry 6 } activeLineFlowmappingType OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineFlowmappingType: 0 flowmapping not base port. 1 flowmapping base eth port. 2 flowmapping base veip port. 3. flowmapping base iphost port." ::= { activeLineFlowmappingEntry 7 } -- 1.1.3.3.5. activeLineAttrMgmtTable -------------------- activeLineAttrMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveLineAttrMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain line attribute management table." ::= { activeLineCommonConfig 5 } activeLineAttrMgmtEntry OBJECT-TYPE SYNTAX ActiveLineAttrMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active line attribute management table" INDEX { activeLineIndexIV, activeLineAttrMgmtIndex } ::= { activeLineAttrMgmtTable 1 } ActiveLineAttrMgmtEntry ::= SEQUENCE { activeLineIndexIV INTEGER, activeLineAttrMgmtIndex INTEGER, activeLineAttrMgmtNportType INTEGER, activeLineAttrMgmtNport INTEGER, activeLineAttrMgmtEtypeFilter INTEGER, activeLineAttrMgmtVlanMode INTEGER, activeLineAttrMgmtCvlanVid INTEGER, activeLineAttrMgmtCvlanPri INTEGER, activeLineAttrMgmtSvlanVid INTEGER, activeLineAttrMgmtSvlanPri INTEGER } activeLineIndexIV OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { activeLineAttrMgmtEntry 1 } activeLineAttrMgmtIndex OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of attribute management, the 2nd index of this table. Should in <1-64>." ::= { activeLineAttrMgmtEntry 2 } activeLineAttrMgmtNportType OBJECT-TYPE SYNTAX INTEGER(1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineAttrMgmtNportType: 1 eth port in sfu 2 veip port in hgu 3 iphost virtual port, for voip, tdm, etc." ::= { activeLineAttrMgmtEntry 3 } activeLineAttrMgmtNport OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "The port of attribute management, if eport, should in <1-8>." ::= { activeLineAttrMgmtEntry 4 } activeLineAttrMgmtEtypeFilter OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineAttrMgmtEtypeFilter: 0 no filter 1 filter ipoe frame 2 filter pppoe frame 3 filter arp frame" ::= { activeLineAttrMgmtEntry 5 } activeLineAttrMgmtVlanMode OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineAttrMgmtVlanMode: 0 transparent 1 tag 2 translation 3 trunk 4 QinQ" ::= { activeLineAttrMgmtEntry 6 } activeLineAttrMgmtCvlanVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "cvlan vid, should be inputted with <1-4094>." ::= { activeLineAttrMgmtEntry 7 } activeLineAttrMgmtCvlanPri OBJECT-TYPE SYNTAX INTEGER(0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The cvlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority." ::= { activeLineAttrMgmtEntry 8 } activeLineAttrMgmtSvlanVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "svlan vid, should be inputted with <1-4094>." ::= { activeLineAttrMgmtEntry 9 } activeLineAttrMgmtSvlanPri OBJECT-TYPE SYNTAX INTEGER(0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "svlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority." ::= { activeLineAttrMgmtEntry 10 } -- 1.1.3.4. activeLineSFUConfig -------------------------- activeLineSFUConfig OBJECT IDENTIFIER ::= { deployActive 4 } -- 1.1.3.4.1. activeLineSFUTable -- 1.1.3.4.2. activeLineSFUEthportTable -- 1.1.3.4.3. activeLineSFUCtrlMcastTable -- 1.1.3.4.1. activeLineSFUTable ------------------------ activeLineSFUTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveLineSFUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain line SFU primary table." ::= { activeLineSFUConfig 1 } activeLineSFUEntry OBJECT-TYPE SYNTAX ActiveLineSFUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active line sfu primary table" INDEX { activeLineIndexV } ::= { activeLineSFUTable 1 } ActiveLineSFUEntry ::= SEQUENCE { activeLineIndexV INTEGER, activeLineSfuLocalSwitch INTEGER, activeLineSfuLoopDetectSwitch INTEGER } activeLineIndexV OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { activeLineSFUEntry 1 } activeLineSfuLocalSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineSfuLocalSwitch: 0 disable(default) 1 enable." ::= { activeLineSFUEntry 2 } activeLineSfuLoopDetectSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineSfuLoopDetectSwitch: 0 disable(default) 1 enable." ::= { activeLineSFUEntry 3 } -- 1.1.3.4.2. activeLineSFUEthportTable ------------------ activeLineSFUEthportTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveLineSFUEthportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain line SFU ethernet port table." ::= { activeLineSFUConfig 2 } activeLineSFUEthportEntry OBJECT-TYPE SYNTAX ActiveLineSFUEthportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active line SFU ethernet port table" INDEX { activeLineIndexVI, activeLineSfuEthportIndex } ::= { activeLineSFUEthportTable 1 } ActiveLineSFUEthportEntry ::= SEQUENCE { activeLineIndexVI INTEGER, activeLineSfuEthportIndex INTEGER, activeLineSfuEthportSwitch INTEGER, activeLineSfuEthportFlowCtrlSwitch INTEGER, activeLineSfuEthportLoopbackSwitch INTEGER, activeLineSfuEthportFastLeaveSwitch INTEGER, activeLineSfuEthportMaxGroups INTEGER, activeLineSfuEthportMaxMacCount INTEGER, activeLineSfuEthportMcastMode INTEGER, activeLineSfuEthportDsIgmpControlType INTEGER, activeLineSfuEthportDsIgmpVid INTEGER, activeLineSfuEthportDsIgmpPri INTEGER, activeLineSfuEthportUsIgmpControlType INTEGER, activeLineSfuEthportUsIgmpVid INTEGER, activeLineSfuEthportUsIgmpPri INTEGER, activeLineSfuEthportBwCir INTEGER, activeLineSfuEthportBwCbs INTEGER, activeLineSfuEthportBwPir INTEGER, activeLineSfuEthportBwPbs INTEGER } activeLineIndexVI OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { activeLineSFUEthportEntry 1 } activeLineSfuEthportIndex OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>." ::= { activeLineSFUEthportEntry 2 } activeLineSfuEthportSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineSfuEthportSwitch: 0 no shutdown(default) 1 shutdown" ::= { activeLineSFUEthportEntry 3 } activeLineSfuEthportFlowCtrlSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineSfuEthportFlowCtrlSwitch: 0 disable(default) 1 enable" ::= { activeLineSFUEthportEntry 4 } activeLineSfuEthportLoopbackSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineSfuEthportLoopbackSwitch: 0 disable(default) 1 enable" ::= { activeLineSFUEthportEntry 5 } activeLineSfuEthportFastLeaveSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineSfuEthportFastLeaveSwitch: 0 disable(default) 1 enable" ::= { activeLineSFUEthportEntry 6 } activeLineSfuEthportMaxGroups OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The SFU ethernet port max igmp groups, should be inputted with <1-128>." ::= { activeLineSFUEthportEntry 7 } activeLineSfuEthportMaxMacCount OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The SFU ethernet port max mac address count, should be inputted with <1-255>." ::= { activeLineSFUEthportEntry 8 } activeLineSfuEthportMcastMode OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineSfuEthportMcastMode(some ont not support): 0 unconcern(default) 1 control 2 igmp snooping" ::= { activeLineSFUEthportEntry 9 } activeLineSfuEthportDsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineSfuEthportDsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid" ::= { activeLineSFUEthportEntry 10 } activeLineSfuEthportDsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The SFU ethernet port downstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { activeLineSFUEthportEntry 11 } activeLineSfuEthportDsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { activeLineSFUEthportEntry 12 } activeLineSfuEthportUsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineSfuEthportUsIgmpControlType: 0 transparent(default, only for read) 1 add tag 2 replace tag 3 replace only vid 4 add only vid" ::= { activeLineSFUEthportEntry 13 } activeLineSfuEthportUsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The SFU ethernet port upstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { activeLineSFUEthportEntry 14 } activeLineSfuEthportUsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { activeLineSFUEthportEntry 15 } activeLineSfuEthportBwCir OBJECT-TYPE SYNTAX INTEGER(64..1024000) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port bandwidth egress cir, should be inputted with <64-1024000>." ::= { activeLineSFUEthportEntry 16 } activeLineSfuEthportBwCbs OBJECT-TYPE SYNTAX INTEGER(2..32000) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port bandwidth egress cbs, should be inputted with <2-32000>." ::= { activeLineSFUEthportEntry 17 } activeLineSfuEthportBwPir OBJECT-TYPE SYNTAX INTEGER(64..1024000) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port bandwidth egress pir, should be inputted with <64-1024000>." ::= { activeLineSFUEthportEntry 18 } activeLineSfuEthportBwPbs OBJECT-TYPE SYNTAX INTEGER(2..32000) MAX-ACCESS read-write STATUS current DESCRIPTION "The SFU ethernet port bandwidth egress pbs, should be inputted with <2-32000>." ::= { activeLineSFUEthportEntry 19 } -- 1.1.3.4.3. activeLineSFUCtrlMcastTable ---------------- activeLineSFUCtrlMcastTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveLineSFUCtrlMcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain line SFU ethernet port control multicast table." ::= { activeLineSFUConfig 3 } activeLineSFUCtrlMcastEntry OBJECT-TYPE SYNTAX ActiveLineSFUCtrlMcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active line SFU ethernet port control multicast table" INDEX { activeLineIndexVII, activeLineSfuEthportIndexI, activeLineSfuCtrlMcastIndex } ::= { activeLineSFUCtrlMcastTable 1 } ActiveLineSFUCtrlMcastEntry ::= SEQUENCE { activeLineIndexVII INTEGER, activeLineSfuEthportIndexI INTEGER, activeLineSfuCtrlMcastIndex INTEGER, activeLineSfuCtrlMcastAccessType INTEGER, activeLineSfuCtrlMcastVid INTEGER, activeLineSfuCtrlMcastSrcIp IpAddress, activeLineSfuCtrlMcastDstStartIp IpAddress, activeLineSfuCtrlMcastDstEndIp IpAddress, activeLineSfuCtrlMcastGroupBw INTEGER, activeLineSfuCtrlMcastDurationTimes INTEGER, activeLineSfuCtrlMcastNumOfTimes INTEGER, activeLineSfuCtrlMcastTimeInterval INTEGER, activeLineSfuCtrlMcastResetTime INTEGER } activeLineIndexVII OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { activeLineSFUCtrlMcastEntry 1 } activeLineSfuEthportIndexI OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>." ::= { activeLineSFUCtrlMcastEntry 2 } activeLineSfuCtrlMcastIndex OBJECT-TYPE SYNTAX INTEGER(0..31) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of SFU ethernet port control multicast, the 3rd index of this table. Should in <0-31>." ::= { activeLineSFUCtrlMcastEntry 3 } activeLineSfuCtrlMcastAccessType OBJECT-TYPE SYNTAX INTEGER(2..3) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineSfuCtrlMcastAccessType: 0 del one entry -- no use 1 clear all entry -- no use 2 add permit entry 3 add preview entry" ::= { activeLineSFUCtrlMcastEntry 4 } activeLineSfuCtrlMcastVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast vlan id, should be <1-4094>." ::= { activeLineSFUCtrlMcastEntry 5 } activeLineSfuCtrlMcastSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast source ip address." ::= { activeLineSFUCtrlMcastEntry 6 } activeLineSfuCtrlMcastDstStartIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast destination start ip address. 224.0.1.0-239.255.255.255" ::= { activeLineSFUCtrlMcastEntry 7 } activeLineSfuCtrlMcastDstEndIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast destination end ip address. 224.0.1.0-239.255.255.255, must not smaller than the start ip address. " ::= { activeLineSFUCtrlMcastEntry 8 } activeLineSfuCtrlMcastGroupBw OBJECT-TYPE SYNTAX INTEGER(1..1024000) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast group bandwidth, should be <1-1024000>. default 5000." ::= { activeLineSFUCtrlMcastEntry 9 } activeLineSfuCtrlMcastDurationTimes OBJECT-TYPE SYNTAX INTEGER(10..6000) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast duration times, should be <10-6000>. default 120(s)." ::= { activeLineSFUCtrlMcastEntry 10 } activeLineSfuCtrlMcastNumOfTimes OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast number of times, should be <1-255>. default 5." ::= { activeLineSFUCtrlMcastEntry 11 } activeLineSfuCtrlMcastTimeInterval OBJECT-TYPE SYNTAX INTEGER(1..7200) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast time interval, should be <1-7200>. default 120(s)." ::= { activeLineSFUCtrlMcastEntry 12 } activeLineSfuCtrlMcastResetTime OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast reset time, should be <1-24>. default 5(o'clock)" ::= { activeLineSFUCtrlMcastEntry 13 } -- 1.1.3.5. activeLineHGUConfig -------------------------- activeLineHGUConfig OBJECT IDENTIFIER ::= { deployActive 5 } -- 1.1.3.5.1. activeLineHGUTable -- 1.1.3.5.2. activeLineHGUCtrlMcastTable -- 1.1.3.5.1. activeLineHGUTable ------------------------ activeLineHGUTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveLineHGUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain line HGU table." ::= { activeLineHGUConfig 1 } activeLineHGUEntry OBJECT-TYPE SYNTAX ActiveLineHGUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active line HGU table" INDEX { activeLineIndexVIII } ::= { activeLineHGUTable 1 } ActiveLineHGUEntry ::= SEQUENCE { activeLineIndexVIII INTEGER, activeLineHguSwitch INTEGER, activeLineHguFastLeaveSwitch INTEGER, activeLineHguMaxGroups INTEGER, activeLineHguMaxMacCount INTEGER, activeLineHguMcastMode INTEGER, activeLineHguDsIgmpControlType INTEGER, activeLineHguDsIgmpVid INTEGER, activeLineHguDsIgmpPri INTEGER, activeLineHguUsIgmpControlType INTEGER, activeLineHguUsIgmpVid INTEGER, activeLineHguUsIgmpPri INTEGER } activeLineIndexVIII OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { activeLineHGUEntry 1 } activeLineHguSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineHguSwitch: 0 no shutdown(default) 1 shutdown" ::= { activeLineHGUEntry 2 } activeLineHguFastLeaveSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineHguFlowCtrlSwitch: 0 disable(default) 1 enable" ::= { activeLineHGUEntry 3 } activeLineHguMaxGroups OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The HGU max igmp groups, should be inputted with <1-128>." ::= { activeLineHGUEntry 4 } activeLineHguMaxMacCount OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The HGU max mac address count, should be inputted with <1-255>." ::= { activeLineHGUEntry 5 } activeLineHguMcastMode OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineHguMcastMode(some ont not support): 0 unconcern(default) 1 control 2 igmp snooping" ::= { activeLineHGUEntry 6 } activeLineHguDsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineHguDsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid" ::= { activeLineHGUEntry 7 } activeLineHguDsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The HGU downstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { activeLineHGUEntry 8 } activeLineHguDsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { activeLineHGUEntry 9 } activeLineHguUsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineHguUsIgmpControlType: 0 transparent(default) 1 add tag 2 replace tag 3 replace only vid 4 add only vid" ::= { activeLineHGUEntry 10 } activeLineHguUsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The HGU upstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { activeLineHGUEntry 11 } activeLineHguUsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { activeLineHGUEntry 12 } -- 1.1.3.5.2. activeLineHGUCtrlMcastTable ---------------- activeLineHGUCtrlMcastTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveLineHGUCtrlMcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain line HGU control multicast table." ::= { activeLineHGUConfig 2 } activeLineHGUCtrlMcastEntry OBJECT-TYPE SYNTAX ActiveLineHGUCtrlMcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active line HGU control multicast table" INDEX { activeLineIndexIX, activeLineHguCtrlMcastIndex } ::= { activeLineHGUCtrlMcastTable 1 } ActiveLineHGUCtrlMcastEntry ::= SEQUENCE { activeLineIndexIX INTEGER, activeLineHguCtrlMcastIndex INTEGER, activeLineHguCtrlMcastAccessType INTEGER, activeLineHguCtrlMcastVid INTEGER, activeLineHguCtrlMcastSrcIp IpAddress, activeLineHguCtrlMcastDstStartIp IpAddress, activeLineHguCtrlMcastDstEndIp IpAddress, activeLineHguCtrlMcastGroupBw INTEGER, activeLineHguCtrlMcastDurationTimes INTEGER, activeLineHguCtrlMcastNumOfTimes INTEGER, activeLineHguCtrlMcastTimeInterval INTEGER, activeLineHguCtrlMcastResetTime INTEGER } activeLineIndexIX OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { activeLineHGUCtrlMcastEntry 1 } activeLineHguCtrlMcastIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of HGU control multicast, the 2nd index of this table. Should in <1-16>." ::= { activeLineHGUCtrlMcastEntry 2 } activeLineHguCtrlMcastAccessType OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "activeLineHGUCtrlMcastAccessType: 0 del one entry 1 clear all entry 2 add permit entry 3 add preview entry" ::= { activeLineHGUCtrlMcastEntry 3 } activeLineHguCtrlMcastVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast vlan id, should be <1-4094>." ::= { activeLineHGUCtrlMcastEntry 4 } activeLineHguCtrlMcastSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast source ip address." ::= { activeLineHGUCtrlMcastEntry 5 } activeLineHguCtrlMcastDstStartIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast destination start ip address." ::= { activeLineHGUCtrlMcastEntry 6 } activeLineHguCtrlMcastDstEndIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast destination end ip address." ::= { activeLineHGUCtrlMcastEntry 7 } activeLineHguCtrlMcastGroupBw OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast group bandwidth, should be ." ::= { activeLineHGUCtrlMcastEntry 8 } activeLineHguCtrlMcastDurationTimes OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast duration times, should be ." ::= { activeLineHGUCtrlMcastEntry 9 } activeLineHguCtrlMcastNumOfTimes OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast number of times, should be ." ::= { activeLineHGUCtrlMcastEntry 10 } activeLineHguCtrlMcastTimeInterval OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast time interval, should be ." ::= { activeLineHGUCtrlMcastEntry 11 } activeLineHguCtrlMcastResetTime OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast reset time, should be ." ::= { activeLineHGUCtrlMcastEntry 12 } -- 1.1.3.6. activeRuleTable ------------------------------ activeRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain rule table" ::= { deployActive 6 } activeRuleEntry OBJECT-TYPE SYNTAX ActiveRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active rule table" INDEX { activeRuleIndex } ::= { activeRuleTable 1 } ActiveRuleEntry ::= SEQUENCE { activeRuleIndex INTEGER, activeRuleDescription OCTET STRING, activeRuleAction INTEGER, activeRuleAuthIndex INTEGER, activeRuleLineIndexesStr OCTET STRING, activeRuleDefaultLine INTEGER } activeRuleIndex OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of rule table, should be inputted with <1-4096>. The range is not always fit, please see range in commands." ::= { activeRuleEntry 1 } activeRuleDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "rule description, max length: 128." ::= { activeRuleEntry 2 } activeRuleAction OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "activeRuleAction: 0 permit 1 deny" ::= { activeRuleEntry 3 } activeRuleAuthIndex OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of rule bind auth, should be inputted with <1-4096> The range is not always fit, please see range in commands." ::= { activeRuleEntry 4 } activeRuleLineIndexesStr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "String joined by rule bind line indexes, such as '12,56,1023'. A rule can at most bind 8 line models." ::= { activeRuleEntry 5 } activeRuleDefaultLine OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of rule default line, should be inputted with <1-4096> The range is not always fit, please see range in commands." ::= { activeRuleEntry 6 } -- 1.1.3.7. activeUniqueConfig -------------------------- activeUniqueConfig OBJECT IDENTIFIER ::= { deployActive 7 } -- 1.1.3.7.1. activeUniquePrimaryTable -- 1.1.3.7.2. activeUniqueSipAgentInfoTable -- 1.1.3.7.3. activeUniqueSipUserAddrTable -- 1.1.3.7.4. activeUniqueSipUserInfoTable -- 1.1.3.7.5. activeUniqueSipDigitMapTable -- 1.1.3.7.1. activeUniquePrimaryTable ------------------ activeUniquePrimaryTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveUniquePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain unique primary table" ::= { activeUniqueConfig 1 } activeUniquePrimaryEntry OBJECT-TYPE SYNTAX ActiveUniquePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active unique primary table" INDEX { activeUniqueIndex } ::= { activeUniquePrimaryTable 1 } ActiveUniquePrimaryEntry ::= SEQUENCE { activeUniqueIndex INTEGER, activeUniqueDescription OCTET STRING, activeUniqueSn OCTET STRING } activeUniqueIndex OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands." ::= { activeUniquePrimaryEntry 1 } activeUniqueDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "unique description, max length: 128." ::= { activeUniquePrimaryEntry 2 } activeUniqueSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "unique sn, string-hex format, max length: 16." ::= { activeUniquePrimaryEntry 3 } -- 1.1.3.7.2. activeUniqueSipAgentInfoTable -------------- activeUniqueSipAgentInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveUniqueSipAgentInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain unique voip sip agent info table" ::= { activeUniqueConfig 2 } activeUniqueSipAgentInfoEntry OBJECT-TYPE SYNTAX ActiveUniqueSipAgentInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active unique voip sip agent info table" INDEX { activeUniqueIndexI } ::= { activeUniqueSipAgentInfoTable 1 } ActiveUniqueSipAgentInfoEntry ::= SEQUENCE { activeUniqueIndexI INTEGER, activeUniqueSipProxyServerIp IpAddress, activeUniqueSipOutboundProxyIp IpAddress, activeUniqueSipRegisterServerIp IpAddress, activeUniqueSipAgentInfoPort INTEGER } activeUniqueIndexI OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands." ::= { activeUniqueSipAgentInfoEntry 1 } activeUniqueSipProxyServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip agent info proxy server ip address." ::= { activeUniqueSipAgentInfoEntry 2 } activeUniqueSipOutboundProxyIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip agent info outbound proxy ip address." ::= { activeUniqueSipAgentInfoEntry 3 } activeUniqueSipRegisterServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip agent info register server ip address." ::= { activeUniqueSipAgentInfoEntry 4 } activeUniqueSipAgentInfoPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip agent info port." ::= { activeUniqueSipAgentInfoEntry 5 } -- 1.1.3.7.3. activeUniqueSipUserAddrTable -------------- activeUniqueSipUserAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveUniqueSipUserAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain unique voip sip user ip address table" ::= { activeUniqueConfig 3 } activeUniqueSipUserAddrEntry OBJECT-TYPE SYNTAX ActiveUniqueSipUserAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active unique voip sip user ip address table" INDEX { activeUniqueIndexII } ::= { activeUniqueSipUserAddrTable 1 } ActiveUniqueSipUserAddrEntry ::= SEQUENCE { activeUniqueIndexII INTEGER, activeUniqueSipuAddressIp IpAddress, activeUniqueSipuAddressMask IpAddress, activeUniqueSipuAddressVlan INTEGER, activeUniqueSipuAddressPri INTEGER } activeUniqueIndexII OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands." ::= { activeUniqueSipUserAddrEntry 1 } activeUniqueSipuAddressIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user ip address." ::= { activeUniqueSipUserAddrEntry 2 } activeUniqueSipuAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user mask." ::= { activeUniqueSipUserAddrEntry 3 } activeUniqueSipuAddressVlan OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user vlan." ::= { activeUniqueSipUserAddrEntry 4 } activeUniqueSipuAddressPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user priroty." ::= { activeUniqueSipUserAddrEntry 5 } -- 1.1.3.7.4. activeUniqueSipUserInfoTable -------------- activeUniqueSipUserInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveUniqueSipUserInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain unique voip sip user infomation table" ::= { activeUniqueConfig 4 } activeUniqueSipUserInfoEntry OBJECT-TYPE SYNTAX ActiveUniqueSipUserInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of unique voip sip user infomation table" INDEX { activeUniqueIndexIII, activeUniqueSipuInfoIndex } ::= { activeUniqueSipUserInfoTable 1 } ActiveUniqueSipUserInfoEntry ::= SEQUENCE { activeUniqueIndexIII INTEGER, activeUniqueSipuInfoIndex INTEGER, activeUniqueSipuInfoUserName OCTET STRING, activeUniqueSipuInfoPassword OCTET STRING, activeUniqueSipuInfoTelephone OCTET STRING } activeUniqueIndexIII OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands." ::= { activeUniqueSipUserInfoEntry 1 } activeUniqueSipuInfoIndex OBJECT-TYPE SYNTAX INTEGER(1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of voip sip user info, the 2nd index of this table. Should in <1-2>." ::= { activeUniqueSipUserInfoEntry 2 } activeUniqueSipuInfoUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user infomation user name, max length: 25." ::= { activeUniqueSipUserInfoEntry 3 } activeUniqueSipuInfoPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user infomation user name, max length: 25." ::= { activeUniqueSipUserInfoEntry 4 } activeUniqueSipuInfoTelephone OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user infomation user name, max length: 25." ::= { activeUniqueSipUserInfoEntry 5 } -- 1.1.3.7.5. activeUniqueSipDigitMapTable -------------- activeUniqueSipDigitMapTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveUniqueSipDigitMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "active domain unique voip sip digit map table" ::= { activeUniqueConfig 5 } activeUniqueSipDigitMapEntry OBJECT-TYPE SYNTAX ActiveUniqueSipDigitMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of active unique voip sip digit map table" INDEX { activeUniqueIndexIV, activeUniqueSipdMapIndex } ::= { activeUniqueSipDigitMapTable 1 } ActiveUniqueSipDigitMapEntry ::= SEQUENCE { activeUniqueIndexIV INTEGER, activeUniqueSipdMapIndex INTEGER, activeUniqueSipdMapDialPlanToken OCTET STRING } activeUniqueIndexIV OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands." ::= { activeUniqueSipDigitMapEntry 1 } activeUniqueSipdMapIndex OBJECT-TYPE SYNTAX INTEGER(1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of voip digit map, the 2nd index of this table. Should in <1-10>." ::= { activeUniqueSipDigitMapEntry 2 } activeUniqueSipdMapDialPlanToken OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..28)) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip digit map dial plan token, max length: 28." ::= { activeUniqueSipDigitMapEntry 3 } -- 1.1.4. deployDemo ---------------------------------- deployDemo OBJECT IDENTIFIER ::= { configDevice 4 } -- 1.1.4.1. demoAuthTable -- 1.1.4.2. demoDbaTable -- 1.1.4.3. demoLineCommonConfig -- 1.1.4.4. demoLineSFUConfig -- 1.1.4.5. demoLineHGUConfig -- 1.1.4.6. demoRuleTable -- 1.1.4.7. demoUniqueConfig -- 1.1.4.1. demoAuthTable ------------------------------ demoAuthTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain auth table" ::= { deployDemo 1 } demoAuthEntry OBJECT-TYPE SYNTAX DemoAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo auth table" INDEX { demoAuthIndex } ::= { demoAuthTable 1 } DemoAuthEntry ::= SEQUENCE { demoAuthIndex INTEGER, demoAuthDescription OCTET STRING, demoAuthMode INTEGER, demoAuthSn OCTET STRING, demoAuthPw OCTET STRING, demoAuthLoid OCTET STRING, demoAuthLopw OCTET STRING, demoAuthAssignedSlot OCTET STRING, demoAuthAssignedPport OCTET STRING, demoAuthAssignedOnt OCTET STRING } demoAuthIndex OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of demo auth table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { demoAuthEntry 1 } demoAuthDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "auth description, max length: 128." ::= { demoAuthEntry 2 } demoAuthMode OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "demoAuthMode: 0 auth mode sn 1 auth mode pw 2 auth mode sn_pw 3 auth mode loid 4 auth mode lopw 5 auth mode loid_lopw" ::= { demoAuthEntry 3 } demoAuthSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "auth sn, hex string, max length: 16." ::= { demoAuthEntry 4 } demoAuthPw OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "auth password, hex string, max length: 20." ::= { demoAuthEntry 5 } demoAuthLoid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "auth loid, max length: 24." ::= { demoAuthEntry 6 } demoAuthLopw OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "auth logic password, max length: 12." ::= { demoAuthEntry 7 } demoAuthAssignedSlot OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "slot id pre assigned." ::= { demoAuthEntry 8 } demoAuthAssignedPport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "pon port id pre assigned." ::= { demoAuthEntry 9 } demoAuthAssignedOnt OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont id pre assigned." ::= { demoAuthEntry 10 } -- 1.1.4.2. demoDbaTable ------------------------------ demoDbaTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoDbaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain dba table" ::= { deployDemo 2 } demoDbaEntry OBJECT-TYPE SYNTAX DemoDbaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo dba table" INDEX { demoDbaIndex } ::= { demoDbaTable 1 } DemoDbaEntry ::= SEQUENCE { demoDbaIndex INTEGER, demoDbaDescription OCTET STRING, demoDbaType INTEGER, demoDbaFixBandwidth INTEGER, demoDbaAssuredBandwidth INTEGER, demoDbaMaxBandwidth INTEGER } demoDbaIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of demo dba table, should be inputted with <0-127>." ::= { demoDbaEntry 1 } demoDbaDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "demo dba description, max length: 128." ::= { demoDbaEntry 2 } demoDbaType OBJECT-TYPE SYNTAX INTEGER(1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "demoDbaType, 1 fixed bandwidth 2 assured bandwidth 3 assured and max bandwidth 4 max bandwidth 5 fixed and assured and max bandwidth" ::= { demoDbaEntry 3 } demoDbaFixBandwidth OBJECT-TYPE SYNTAX INTEGER(128..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "Must to be divisible by 64kbps, must not less than 128 kbps." ::= { demoDbaEntry 4 } demoDbaAssuredBandwidth OBJECT-TYPE SYNTAX INTEGER(0..1310592) MAX-ACCESS read-only STATUS current DESCRIPTION "Must to be divisible by 64kbps, Can be 0. If not 0, it must be at least 256 kbps." ::= { demoDbaEntry 5 } demoDbaMaxBandwidth OBJECT-TYPE SYNTAX INTEGER(0..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "Must to be divisible by 64kbps, and must not be less than the sum of assured BW plus fixedBW. Must less than 1310720 kbps" ::= { demoDbaEntry 6 } -- 1.1.4.3. demoLineCommonConfig ---------------------- demoLineCommonConfig OBJECT IDENTIFIER ::= { deployDemo 3 } -- 1.1.4.3.1. demoLinePrimaryTable -- 1.1.4.3.2. demoLineTcontTable -- 1.1.4.3.3. demoLineGemportTable -- 1.1.4.3.4. demoLineFlowmappingTable -- 1.1.4.3.5. demoLineAttrMgmtTable -- 1.1.4.3.1. demoLinePrimaryTable -------------------- demoLinePrimaryTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoLinePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain line primary table" ::= { demoLineCommonConfig 1 } demoLinePrimaryEntry OBJECT-TYPE SYNTAX DemoLinePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo line primary table" INDEX { demoLineIndex } ::= { demoLinePrimaryTable 1 } DemoLinePrimaryEntry ::= SEQUENCE { demoLineIndex INTEGER, demoLineDeviceType OCTET STRING, demoLineDescription OCTET STRING, demoLineTrafficMode INTEGER, demoLineMappingMode INTEGER } demoLineIndex OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands." ::= { demoLinePrimaryEntry 1 } demoLineDeviceType OBJECT-TYPE SYNTAX OCTET STRING(SIZE(7..7)) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineDeviceType: c30-214 2ETH(1ETH+1iTV)+1POTS SFU c30-400 4ETH SFU c30-401 4ETH+WIFI HGU c30-420 4ETH+2POTS SFU c30-423 4ETH+2POTS+WIFI+USB HGU c31-423 4ETH+2POTS+WIFI+USB HGU+SFU c40-100 1ETH SFU c40-201 2ETH+WIFI HGU c40-210 1GE+1FE+1POTS HGU c40-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU d10-423 4ETH+2POTS+WIFI+USB HGU f10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU h60-100 1ETH SFU l30-100 1ETH SFU l30-210 2ETH+1POTS SFU m50-420 4ETH+2POTS SFU n20-100 1ETH SFU n20-400 4ETH SFU n40-100 1ETH SFU s10-214 2ETH(1ETH+1iTV)+1POTS HGU s30-100 1ETH SFU t10-100 1ETH SFU t10-214 2ETH(1ETH+1iTV)+1POTS SFU t10-403 4ETH+WIFI+USB HGU t10-420 4ETH+2POTS SFU t10-423 4ETH+2POTS+WIFI+USB HGU t10-427 4ETH(3ETH+1iTV)+2POTS+WIFI+USB HGU t60-100 1ETH SFU" ::= { demoLinePrimaryEntry 2 } demoLineDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "line description, max length: 128." ::= { demoLinePrimaryEntry 3 } demoLineTrafficMode OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineTrafficMode: 0 pri-queue: priority queue scheduling 1 gem-car: GEM traffic control" ::= { demoLinePrimaryEntry 4 } demoLineMappingMode OBJECT-TYPE SYNTAX INTEGER(0..6) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineMappingMode: 0 vlan 1 priority 2 vlan-priority 3 port 4 port-vlan 5 port-priority 6 port-vlan-priority" ::= { demoLinePrimaryEntry 5 } -- 1.1.4.3.2. demoLineTcontTable ---------------------- demoLineTcontTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoLineTcontEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain line tcont table, now only for tcont bind dba." ::= { demoLineCommonConfig 2 } demoLineTcontEntry OBJECT-TYPE SYNTAX DemoLineTcontEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo line tcont table" INDEX { demoLineIndex, demoLineTcontIndex } ::= { demoLineTcontTable 1 } DemoLineTcontEntry ::= SEQUENCE { demoLineTcontIndex INTEGER, demoLineTcontDbaIndex INTEGER } demoLineTcontIndex OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of tcont, the 2nd index of this table. Should in <1-8>." ::= { demoLineTcontEntry 1 } demoLineTcontDbaIndex OBJECT-TYPE SYNTAX INTEGER(0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of tcont bind dba, should be inputted with <0-127>." ::= { demoLineTcontEntry 2 } -- 1.1.4.3.3. demoLineGemportTable -------------------- demoLineGemportTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoLineGemportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain line gemport table." ::= { demoLineCommonConfig 3 } demoLineGemportEntry OBJECT-TYPE SYNTAX DemoLineGemportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo line gemport table" INDEX { demoLineIndex, demoLineGemportIndex } ::= { demoLineGemportTable 1 } DemoLineGemportEntry ::= SEQUENCE { demoLineGemportIndex INTEGER, demoLineGemportSvid INTEGER, demoLineGemportTcontId INTEGER, demoLineGemportCir INTEGER, demoLineGemportPir INTEGER, demoLineGemportCbs INTEGER, demoLineGemportPbs INTEGER, demoLineGemportPq INTEGER } demoLineGemportIndex OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of gemport, the 2nd index of this table. Should in <1-24>." ::= { demoLineGemportEntry 1 } demoLineGemportSvid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport service vlan index, should be inputted with <1-4094>." ::= { demoLineGemportEntry 2 } demoLineGemportTcontId OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport bind tcont index, should be inputted with <1-8>." ::= { demoLineGemportEntry 3 } demoLineGemportCir OBJECT-TYPE SYNTAX INTEGER(64..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport committed infomation rate, should be inputted with <64-1310720>. must to be divisible by 64kbps,must not less than 64 kbps." ::= { demoLineGemportEntry 4 } demoLineGemportPir OBJECT-TYPE SYNTAX INTEGER(64..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport peek infomation rate, should be inputted with <64-1310720>. must to be divisible by 64kbps,must not less than 64 kbps." ::= { demoLineGemportEntry 5 } demoLineGemportCbs OBJECT-TYPE SYNTAX INTEGER(2000..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport committed burst size, should be inputted with <2000-1310720>." ::= { demoLineGemportEntry 6 } demoLineGemportPbs OBJECT-TYPE SYNTAX INTEGER(2000..1310720) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport peek burst size, should be inputted with <2000-1310720>." ::= { demoLineGemportEntry 7 } demoLineGemportPq OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The gemport priority queue, should be inputted with <0-7>." ::= { demoLineGemportEntry 8 } -- 1.1.4.3.4. demoLineFlowmappingTable ---------------- demoLineFlowmappingTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoLineFlowmappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain line flow mapping table." ::= { demoLineCommonConfig 4 } demoLineFlowmappingEntry OBJECT-TYPE SYNTAX DemoLineFlowmappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo line flow mapping table" INDEX { demoLineIndex, demoLineFlowmappingIndex } ::= { demoLineFlowmappingTable 1 } DemoLineFlowmappingEntry ::= SEQUENCE { demoLineFlowmappingIndex INTEGER, demoLineFlowmappingVid INTEGER, demoLineFlowmappingPriority INTEGER, demoLineFlowmappingEthport INTEGER, demoLineFlowmappingGemport INTEGER, demoLineFlowmappingType INTEGER } demoLineFlowmappingIndex OBJECT-TYPE SYNTAX INTEGER(1..48) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of flowmapping, the 2nd index of this table. Should in <1-48>. The range is not always fit, please see range in commands." ::= { demoLineFlowmappingEntry 1 } demoLineFlowmappingVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The flow mapping vid, should be inputted with <1-4094>." ::= { demoLineFlowmappingEntry 2 } demoLineFlowmappingPriority OBJECT-TYPE SYNTAX INTEGER(0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The flow mapping priority, should be inputted with <0-8>. Value 8 means don't care 802.1p priority." ::= { demoLineFlowmappingEntry 3 } demoLineFlowmappingEthport OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The flow mapping ethernet port id, should be inputted with <1-8>." ::= { demoLineFlowmappingEntry 4 } demoLineFlowmappingGemport OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-only STATUS current DESCRIPTION "The flow mapping gem port id, should be inputted with <1-24>." ::= { demoLineFlowmappingEntry 5 } demoLineFlowmappingType OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineFlowmappingType: 0 flowmapping not base port. 1 flowmapping base eth port. 2 flowmapping base veip port. 3. flowmapping base iphost port." ::= { demoLineFlowmappingEntry 6 } -- 1.1.4.3.5. demoLineAttrMgmtTable -------------------- demoLineAttrMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoLineAttrMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain line attribute management table." ::= { demoLineCommonConfig 5 } demoLineAttrMgmtEntry OBJECT-TYPE SYNTAX DemoLineAttrMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo line attribute management table" INDEX { demoLineIndex, demoLineAttrMgmtIndex } ::= { demoLineAttrMgmtTable 1 } DemoLineAttrMgmtEntry ::= SEQUENCE { demoLineAttrMgmtIndex INTEGER, demoLineAttrMgmtNport INTEGER, demoLineAttrMgmtVlanMode INTEGER, demoLineAttrMgmtNportType INTEGER, demoLineAttrMgmtEtypeFilter INTEGER, demoLineAttrMgmtCvlanVid INTEGER, demoLineAttrMgmtCvlanPri INTEGER, demoLineAttrMgmtSvlanVid INTEGER, demoLineAttrMgmtSvlanPri INTEGER } demoLineAttrMgmtIndex OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of attribute management, the 2nd index of this table. Should in <1-64>." ::= { demoLineAttrMgmtEntry 1 } demoLineAttrMgmtNport OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "The port of attribute management, if eport, should in <1-8>." ::= { demoLineAttrMgmtEntry 2 } demoLineAttrMgmtVlanMode OBJECT-TYPE SYNTAX INTEGER(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineAttrMgmtVlanMode: 0 transparent 1 tag 2 translation 3 trunk 4 QinQ" ::= { demoLineAttrMgmtEntry 3 } demoLineAttrMgmtNportType OBJECT-TYPE SYNTAX INTEGER(1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineAttrMgmtNportType: 1 eth port in sfu 2 veip port in hgu 3 iphost virtual port, for voip, tdm, etc." ::= { demoLineAttrMgmtEntry 4 } demoLineAttrMgmtEtypeFilter OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineAttrMgmtEtypeFilter: 0 no filter 1 filter ipoe frame 2 filter pppoe frame 3 filter arp frame" ::= { demoLineAttrMgmtEntry 5 } demoLineAttrMgmtCvlanVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "cvlan vid, should be inputted with <1-4094>." ::= { demoLineAttrMgmtEntry 6 } demoLineAttrMgmtCvlanPri OBJECT-TYPE SYNTAX INTEGER(0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The cvlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority." ::= { demoLineAttrMgmtEntry 7 } demoLineAttrMgmtSvlanVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "svlan vid, should be inputted with <1-4094>." ::= { demoLineAttrMgmtEntry 8 } demoLineAttrMgmtSvlanPri OBJECT-TYPE SYNTAX INTEGER(0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "svlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority." ::= { demoLineAttrMgmtEntry 9 } -- 1.1.4.4. demoLineSFUConfig -------------------------- demoLineSFUConfig OBJECT IDENTIFIER ::= { deployDemo 4 } -- 1.1.4.4.1. demoLineSFUTable -- 1.1.4.4.2. demoLineSFUEthportTable -- 1.1.4.4.3. demoLineSFUCtrlMcastTable -- 1.1.4.4.1. demoLineSFUTable ------------------------ demoLineSFUTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoLineSFUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain line SFU primary table." ::= { demoLineSFUConfig 1 } demoLineSFUEntry OBJECT-TYPE SYNTAX DemoLineSFUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo line sfu primary table" INDEX { demoLineIndex } ::= { demoLineSFUTable 1 } DemoLineSFUEntry ::= SEQUENCE { demoLineSfuLocalSwitch INTEGER, demoLineSfuLoopDetectSwitch INTEGER } demoLineSfuLocalSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineSfuLocalSwitch: 0 disable(default) 1 enable." ::= { demoLineSFUEntry 1 } demoLineSfuLoopDetectSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineSfuLoopDetectSwitch: 0 disable(default) 1 enable." ::= { demoLineSFUEntry 2 } -- 1.1.4.4.2. demoLineSFUEthportTable ------------------ demoLineSFUEthportTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoLineSFUEthportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain line SFU ethernet port table." ::= { demoLineSFUConfig 2 } demoLineSFUEthportEntry OBJECT-TYPE SYNTAX DemoLineSFUEthportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo line SFU ethernet port table" INDEX { demoLineIndex, demoLineSfuEthportIndex } ::= { demoLineSFUEthportTable 1 } DemoLineSFUEthportEntry ::= SEQUENCE { demoLineSfuEthportIndex INTEGER, demoLineSfuEthportSwitch INTEGER, demoLineSfuEthportFlowCtrlSwitch INTEGER, demoLineSfuEthportLoopbackSwitch INTEGER, demoLineSfuEthportBwEgress INTEGER, demoLineSfuEthportFastLeaveSwitch INTEGER, demoLineSfuEthportMaxGroups INTEGER, demoLineSfuEthportMaxMacCount INTEGER, demoLineSfuEthportMcastMode INTEGER, demoLineSfuEthportDsIgmpControlType INTEGER, demoLineSfuEthportDsIgmpVid INTEGER, demoLineSfuEthportDsIgmpPri INTEGER, demoLineSfuEthportUsIgmpControlType INTEGER, demoLineSfuEthportUsIgmpVid INTEGER, demoLineSfuEthportUsIgmpPri INTEGER } demoLineSfuEthportIndex OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>." ::= { demoLineSFUEthportEntry 1 } demoLineSfuEthportSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineSfuEthportSwitch: 0 no shutdown(default) 1 shutdown" ::= { demoLineSFUEthportEntry 2 } demoLineSfuEthportFlowCtrlSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineSfuEthportFlowCtrlSwitch: 0 disable(default) 1 enable" ::= { demoLineSFUEthportEntry 3 } demoLineSfuEthportLoopbackSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineSfuEthportLoopbackSwitch: 0 disable(default) 1 enable" ::= { demoLineSFUEthportEntry 4 } demoLineSfuEthportBwEgress OBJECT-TYPE SYNTAX INTEGER(64..1023936) MAX-ACCESS read-only STATUS current DESCRIPTION "The SFU ethernet port max bandwidth egress, should be inputted with <64-1023936>." ::= { demoLineSFUEthportEntry 5 } demoLineSfuEthportFastLeaveSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineSfuEthportFastLeaveSwitch: 0 disable(default) 1 enable" ::= { demoLineSFUEthportEntry 6 } demoLineSfuEthportMaxGroups OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The SFU ethernet port max igmp groups, should be inputted with <1-128>." ::= { demoLineSFUEthportEntry 7 } demoLineSfuEthportMaxMacCount OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The SFU ethernet port max mac address count, should be inputted with <1-255>." ::= { demoLineSFUEthportEntry 8 } demoLineSfuEthportMcastMode OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineSfuEthportMcastMode(some ont not support): 0 unconcern(default) 1 control 2 igmp snooping" ::= { demoLineSFUEthportEntry 9 } demoLineSfuEthportDsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineSfuEthportDsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid" ::= { demoLineSFUEthportEntry 10 } demoLineSfuEthportDsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The SFU ethernet port downstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { demoLineSFUEthportEntry 11 } demoLineSfuEthportDsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { demoLineSFUEthportEntry 12 } demoLineSfuEthportUsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineSfuEthportUsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid" ::= { demoLineSFUEthportEntry 13 } demoLineSfuEthportUsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The SFU ethernet port upstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { demoLineSFUEthportEntry 14 } demoLineSfuEthportUsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { demoLineSFUEthportEntry 15 } -- 1.1.4.4.3. demoLineSFUCtrlMcastTable ---------------- demoLineSFUCtrlMcastTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoLineSFUCtrlMcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain line SFU ethernet port control multicast table." ::= { demoLineSFUConfig 3 } demoLineSFUCtrlMcastEntry OBJECT-TYPE SYNTAX DemoLineSFUCtrlMcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo line SFU ethernet port control multicast table" INDEX { demoLineIndex, demoLineSfuEthportIndex, demoLineSfuCtrlMcastIndex } ::= { demoLineSFUCtrlMcastTable 1 } DemoLineSFUCtrlMcastEntry ::= SEQUENCE { demoLineSfuCtrlMcastIndex INTEGER, demoLineSfuCtrlMcastAccessType INTEGER, demoLineSfuCtrlMcastVid INTEGER, demoLineSfuCtrlMcastSrcIp IpAddress, demoLineSfuCtrlMcastDstStartIp IpAddress, demoLineSfuCtrlMcastDstEndIp IpAddress, demoLineSfuCtrlMcastGroupBw INTEGER, demoLineSfuCtrlMcastDurationTimes INTEGER, demoLineSfuCtrlMcastNumOfTimes INTEGER, demoLineSfuCtrlMcastTimeInterval INTEGER, demoLineSfuCtrlMcastResetTime INTEGER } demoLineSfuCtrlMcastIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of SFU ethernet port control multicast, the 3rd index of this table. Should in <1-16>." ::= { demoLineSFUCtrlMcastEntry 1 } demoLineSfuCtrlMcastAccessType OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineSfuCtrlMcastAccessType: 0 del one entry 1 clear all entry 2 add permit entry 3 add preview entry" ::= { demoLineSFUCtrlMcastEntry 2 } demoLineSfuCtrlMcastVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast vlan id, should be <1-4094>." ::= { demoLineSFUCtrlMcastEntry 3 } demoLineSfuCtrlMcastSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast source ip address." ::= { demoLineSFUCtrlMcastEntry 4 } demoLineSfuCtrlMcastDstStartIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast destination start ip address." ::= { demoLineSFUCtrlMcastEntry 5 } demoLineSfuCtrlMcastDstEndIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast destination end ip address." ::= { demoLineSFUCtrlMcastEntry 6 } demoLineSfuCtrlMcastGroupBw OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast group bandwidth, should be ." ::= { demoLineSFUCtrlMcastEntry 7 } demoLineSfuCtrlMcastDurationTimes OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast duration times, should be ." ::= { demoLineSFUCtrlMcastEntry 8 } demoLineSfuCtrlMcastNumOfTimes OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast number of times, should be ." ::= { demoLineSFUCtrlMcastEntry 9 } demoLineSfuCtrlMcastTimeInterval OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast time interval, should be ." ::= { demoLineSFUCtrlMcastEntry 10 } demoLineSfuCtrlMcastResetTime OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "sfu control multicast reset time, should be ." ::= { demoLineSFUCtrlMcastEntry 11 } -- 1.1.4.5. demoLineHGUConfig -------------------------- demoLineHGUConfig OBJECT IDENTIFIER ::= { deployDemo 5 } -- 1.1.4.5.1. demoLineHGUTable -- 1.1.4.5.2. demoLineHGUCtrlMcastTable -- 1.1.4.5.1. demoLineHGUTable ------------------------ demoLineHGUTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoLineHGUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain line HGU table." ::= { demoLineHGUConfig 1 } demoLineHGUEntry OBJECT-TYPE SYNTAX DemoLineHGUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo line HGU table" INDEX { demoLineIndex } ::= { demoLineHGUTable 1 } DemoLineHGUEntry ::= SEQUENCE { demoLineHguSwitch INTEGER, demoLineHguFastLeaveSwitch INTEGER, demoLineHguMaxGroups INTEGER, demoLineHguMaxMacCount INTEGER, demoLineHguMcastMode INTEGER, demoLineHguDsIgmpControlType INTEGER, demoLineHguDsIgmpVid INTEGER, demoLineHguDsIgmpPri INTEGER, demoLineHguUsIgmpControlType INTEGER, demoLineHguUsIgmpVid INTEGER, demoLineHguUsIgmpPri INTEGER } demoLineHguSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineHguSwitch: 0 no shutdown(default) 1 shutdown" ::= { demoLineHGUEntry 1 } demoLineHguFastLeaveSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineHguFlowCtrlSwitch: 0 disable(default) 1 enable" ::= { demoLineHGUEntry 2 } demoLineHguMaxGroups OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The HGU max igmp groups, should be inputted with <1-128>." ::= { demoLineHGUEntry 3 } demoLineHguMaxMacCount OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The HGU max mac address count, should be inputted with <1-255>." ::= { demoLineHGUEntry 4 } demoLineHguMcastMode OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineHguMcastMode(some ont not support): 0 unconcern(default) 1 control 2 igmp snooping" ::= { demoLineHGUEntry 5 } demoLineHguDsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineHguDsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid" ::= { demoLineHGUEntry 6 } demoLineHguDsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The HGU downstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { demoLineHGUEntry 7 } demoLineHguDsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { demoLineHGUEntry 8 } demoLineHguUsIgmpControlType OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineHguUsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid" ::= { demoLineHGUEntry 9 } demoLineHguUsIgmpVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The HGU upstream igmp and multicast control vid, should be inputted with <1-4094>." ::= { demoLineHGUEntry 10 } demoLineHguUsIgmpPri OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan priority, should be inputted with <0-7>." ::= { demoLineHGUEntry 11 } -- 1.1.4.5.2. demoLineHGUCtrlMcastTable ---------------- demoLineHGUCtrlMcastTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoLineHGUCtrlMcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain line HGU control multicast table." ::= { demoLineHGUConfig 2 } demoLineHGUCtrlMcastEntry OBJECT-TYPE SYNTAX DemoLineHGUCtrlMcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo line HGU control multicast table" INDEX { demoLineIndex, demoLineHguCtrlMcastIndex } ::= { demoLineHGUCtrlMcastTable 1 } DemoLineHGUCtrlMcastEntry ::= SEQUENCE { demoLineHguCtrlMcastIndex INTEGER, demoLineHguCtrlMcastAccessType INTEGER, demoLineHguCtrlMcastVid INTEGER, demoLineHguCtrlMcastSrcIp IpAddress, demoLineHguCtrlMcastDstStartIp IpAddress, demoLineHguCtrlMcastDstEndIp IpAddress, demoLineHguCtrlMcastGroupBw INTEGER, demoLineHguCtrlMcastDurationTimes INTEGER, demoLineHguCtrlMcastNumOfTimes INTEGER, demoLineHguCtrlMcastTimeInterval INTEGER, demoLineHguCtrlMcastResetTime INTEGER } demoLineHguCtrlMcastIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of HGU control multicast, the 2nd index of this table. Should in <1-16>." ::= { demoLineHGUCtrlMcastEntry 1 } demoLineHguCtrlMcastAccessType OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "demoLineHGUCtrlMcastAccessType: 0 del one entry 1 clear all entry 2 add permit entry 3 add preview entry" ::= { demoLineHGUCtrlMcastEntry 2 } demoLineHguCtrlMcastVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast vlan id, should be <1-4094>." ::= { demoLineHGUCtrlMcastEntry 3 } demoLineHguCtrlMcastSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast source ip address." ::= { demoLineHGUCtrlMcastEntry 4 } demoLineHguCtrlMcastDstStartIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast destination start ip address." ::= { demoLineHGUCtrlMcastEntry 5 } demoLineHguCtrlMcastDstEndIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast destination end ip address." ::= { demoLineHGUCtrlMcastEntry 6 } demoLineHguCtrlMcastGroupBw OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast group bandwidth, should be ." ::= { demoLineHGUCtrlMcastEntry 7 } demoLineHguCtrlMcastDurationTimes OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast duration times, should be ." ::= { demoLineHGUCtrlMcastEntry 8 } demoLineHguCtrlMcastNumOfTimes OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast number of times, should be ." ::= { demoLineHGUCtrlMcastEntry 9 } demoLineHguCtrlMcastTimeInterval OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast time interval, should be ." ::= { demoLineHGUCtrlMcastEntry 10 } demoLineHguCtrlMcastResetTime OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "hgu control multicast reset time, should be ." ::= { demoLineHGUCtrlMcastEntry 11 } -- 1.1.4.6. demoRuleTable ------------------------------ demoRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain rule table" ::= { deployDemo 6 } demoRuleEntry OBJECT-TYPE SYNTAX DemoRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo rule table" INDEX { demoRuleIndex } ::= { demoRuleTable 1 } DemoRuleEntry ::= SEQUENCE { demoRuleIndex INTEGER, demoRuleDescription OCTET STRING, demoRuleAction INTEGER, demoRuleAuthIndex INTEGER, demoRuleLineIndexesStr OCTET STRING } demoRuleIndex OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of rule table, should be inputted with <1-4096>. The range is not always fit, please see range in commands." ::= { demoRuleEntry 1 } demoRuleDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "rule description, max length: 128." ::= { demoRuleEntry 2 } demoRuleAction OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "demoRuleAction: 0 permit 1 deny" ::= { demoRuleEntry 3 } demoRuleAuthIndex OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of rule bind auth, should be inputted with <1-4096> The range is not always fit, please see range in commands." ::= { demoRuleEntry 4 } demoRuleLineIndexesStr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "String joined by rule bind line indexes, such as '12,56,1023'. A rule can at most bind 8 line models." ::= { demoRuleEntry 5 } -- 1.1.4.7. demoUniqueConfig -------------------------- demoUniqueConfig OBJECT IDENTIFIER ::= { deployDemo 7 } -- 1.1.4.7.1. demoUniquePrimaryTable -- 1.1.4.7.2. demoUniqueSipAgentInfoTable -- 1.1.4.7.3. demoUniqueSipUserAddrTable -- 1.1.4.7.4. demoUniqueSipUserInfoTable -- 1.1.4.7.5. demoUniqueSipDigitMapTable -- 1.1.4.7.1. demoUniquePrimaryTable ------------------ demoUniquePrimaryTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoUniquePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain unique primary table" ::= { demoUniqueConfig 1 } demoUniquePrimaryEntry OBJECT-TYPE SYNTAX DemoUniquePrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo unique primary table" INDEX { demoUniqueIndex } ::= { demoUniquePrimaryTable 1 } DemoUniquePrimaryEntry ::= SEQUENCE { demoUniqueIndex INTEGER, demoUniqueDescription OCTET STRING, demoUniqueSn OCTET STRING } demoUniqueIndex OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands." ::= { demoUniquePrimaryEntry 1 } demoUniqueDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "unique description, max length: 128." ::= { demoUniquePrimaryEntry 2 } demoUniqueSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "unique sn, hex format, max length: 16." ::= { demoUniquePrimaryEntry 3 } -- 1.1.4.7.2. demoUniqueSipAgentInfoTable -------------- demoUniqueSipAgentInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoUniqueSipAgentInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain unique voip sip agent info table" ::= { demoUniqueConfig 2 } demoUniqueSipAgentInfoEntry OBJECT-TYPE SYNTAX DemoUniqueSipAgentInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo unique voip sip agent info table" INDEX { demoUniqueIndex } ::= { demoUniqueSipAgentInfoTable 1 } DemoUniqueSipAgentInfoEntry ::= SEQUENCE { demoUniqueSipProxyServerIp IpAddress, demoUniqueSipOutboundProxyIp IpAddress, demoUniqueSipRegisterServerIp IpAddress, demoUniqueSipAgentInfoPort INTEGER } demoUniqueSipProxyServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip agent info proxy server ip address." ::= { demoUniqueSipAgentInfoEntry 1 } demoUniqueSipOutboundProxyIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip agent info outbound proxy ip address." ::= { demoUniqueSipAgentInfoEntry 2 } demoUniqueSipRegisterServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip agent info register server ip address." ::= { demoUniqueSipAgentInfoEntry 3 } demoUniqueSipAgentInfoPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip agent info port." ::= { demoUniqueSipAgentInfoEntry 4 } -- 1.1.4.7.3. demoUniqueSipUserAddrTable -------------- demoUniqueSipUserAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoUniqueSipUserAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain unique voip sip user ip address table" ::= { demoUniqueConfig 3 } demoUniqueSipUserAddrEntry OBJECT-TYPE SYNTAX DemoUniqueSipUserAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo unique voip sip user ip address table" INDEX { demoUniqueIndex } ::= { demoUniqueSipUserAddrTable 1 } DemoUniqueSipUserAddrEntry ::= SEQUENCE { demoUniqueSipuAddressIp IpAddress, demoUniqueSipuAddressMask IpAddress, demoUniqueSipuAddressVlan INTEGER } demoUniqueSipuAddressIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user ip address." ::= { demoUniqueSipUserAddrEntry 1 } demoUniqueSipuAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user mask." ::= { demoUniqueSipUserAddrEntry 2 } demoUniqueSipuAddressVlan OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user vlan." ::= { demoUniqueSipUserAddrEntry 3 } -- 1.1.4.7.4. demoUniqueSipUserInfoTable -------------- demoUniqueSipUserInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoUniqueSipUserInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain unique voip sip user infomation table" ::= { demoUniqueConfig 4 } demoUniqueSipUserInfoEntry OBJECT-TYPE SYNTAX DemoUniqueSipUserInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of unique voip sip user infomation table" INDEX { demoUniqueIndex, demoUniqueSipuInfoIndex } ::= { demoUniqueSipUserInfoTable 1 } DemoUniqueSipUserInfoEntry ::= SEQUENCE { demoUniqueSipuInfoIndex INTEGER, demoUniqueSipuInfoUserName OCTET STRING, demoUniqueSipuInfoPassword OCTET STRING, demoUniqueSipuInfoTelephone OCTET STRING } demoUniqueSipuInfoIndex OBJECT-TYPE SYNTAX INTEGER(1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of voip sip user info, the 2nd index of this table. Should in <1-2>." ::= { demoUniqueSipUserInfoEntry 1 } demoUniqueSipuInfoUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user infomation user name, max length: 25." ::= { demoUniqueSipUserInfoEntry 2 } demoUniqueSipuInfoPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user infomation user name, max length: 25." ::= { demoUniqueSipUserInfoEntry 3 } demoUniqueSipuInfoTelephone OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip user infomation user name, max length: 25." ::= { demoUniqueSipUserInfoEntry 4 } -- 1.1.4.7.5. demoUniqueSipDigitMapTable -------------- demoUniqueSipDigitMapTable OBJECT-TYPE SYNTAX SEQUENCE OF DemoUniqueSipDigitMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "demo domain unique voip sip digit map table" ::= { demoUniqueConfig 5 } demoUniqueSipDigitMapEntry OBJECT-TYPE SYNTAX DemoUniqueSipDigitMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of demo unique voip sip digit map table" INDEX { demoUniqueIndex, demoUniqueSipdMapIndex } ::= { demoUniqueSipDigitMapTable 1 } DemoUniqueSipDigitMapEntry ::= SEQUENCE { demoUniqueSipdMapIndex INTEGER, demoUniqueSipdMapDialPlanToken OCTET STRING } demoUniqueSipdMapIndex OBJECT-TYPE SYNTAX INTEGER(1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of voip digit map, the 2nd index of this table. Should in <1-10>." ::= { demoUniqueSipDigitMapEntry 1 } demoUniqueSipdMapDialPlanToken OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..28)) MAX-ACCESS read-only STATUS current DESCRIPTION "voip sip digit map dial plan token, max length: 28." ::= { demoUniqueSipDigitMapEntry 2 } -- 1.1.5. configDeviceBaseInfo ---------------------------- configDeviceBaseInfo OBJECT IDENTIFIER ::= { configDevice 5 } idleTimeout OBJECT-TYPE SYNTAX INTEGER(0..480) MAX-ACCESS read-write STATUS current DESCRIPTION "system idle timout, unit is minute." ::= { configDeviceBaseInfo 1 } loggingDisplaySwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "loggingDisplaySwitch: 0 off(default) 1 on" ::= { configDeviceBaseInfo 2 } ontLoggingDisplaySwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "ontLoggingDisplaySwitch: 0 off(default) 1 on." ::= { configDeviceBaseInfo 3 } ponSwitchTable OBJECT-TYPE SYNTAX SEQUENCE OF PonSwitchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "pon switch table." ::= { configDeviceBaseInfo 4 } ponSwitchEntry OBJECT-TYPE SYNTAX PonSwitchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of pon switch table" INDEX { ponSwitchVlanIndex } ::= { ponSwitchTable 1 } PonSwitchEntry ::= SEQUENCE { ponSwitchVlanIndex INTEGER, ponSwitchEnable INTEGER, ponSwitchRowStatus RowStatus } ponSwitchVlanIndex OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this table, should be inputted with <1-4094>. The range is not always fit, please see range in commands." ::= { ponSwitchEntry 1 } ponSwitchEnable OBJECT-TYPE SYNTAX INTEGER(1) MAX-ACCESS read-only STATUS current DESCRIPTION "1 -- enable pon-switch." ::= { ponSwitchEntry 2 } ponSwitchRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { ponSwitchEntry 3 } deactiveOntIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "deactive ont id list, such as 0/8/1-0/8/10,0/10/10" ::= { configDeviceBaseInfo 5 } -- 1.1.6. configEdfa -------------------------------------- configEdfa OBJECT IDENTIFIER ::= { configDevice 6 } -- fixme: 不知道整数还是小数的，先统一采用字符串格式，由网管自行解析成需要的格式吧 edfaInternalTemperature OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa internal temperature, unit is ℃." ::= { configEdfa 1 } edfaInputPower1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa input power1, unit is dBm." ::= { configEdfa 2 } edfaInputPower2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa input power2, unit is dBm." ::= { configEdfa 3 } edfaActualOutputPower OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa actual output power, unit is dBm." ::= { configEdfa 4 } edfaOutputAttenuator OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "edfa setting output attenuator, unit is dBm. range is -0.5 to 3." ::= { configEdfa 5 } edfaSerialNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa serial number." ::= { configEdfa 6 } edfaPumpBias1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa pump bias, unit is A." ::= { configEdfa 7 } edfaPumpTemperature1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa pump temperature, unit is ℃." ::= { configEdfa 8 } edfaPumpTec1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa pump temperature control current, unit is A." ::= { configEdfa 9 } edfaPumpBias2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa pump bias, unit is A." ::= { configEdfa 10 } edfaPumpTemperature2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa pump temperature, unit is ℃." ::= { configEdfa 11 } edfaPumpTec2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa pump temperature control current, unit is A." ::= { configEdfa 12 } edfaPowerVoltage OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "edfa power voltage, unit is V." ::= { configEdfa 13 } edfaHostname OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "edfa name of equipment." ::= { configEdfa 14 } edfaReset OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "set edfaReset = 1 to reset all parameter." ::= { configEdfa 15 } -------------------------------------------------------------- ------------------ 1.2. config slot ------------------------ -------------------------------------------------------------- -------------------------------------------------------------- ------------------ 1.3. config pport ---------------------- -------------------------------------------------------------- -- 1.3.1. ontFindConfigTable -- 1.3.2. ontSilentConfigTable -- 1.3.3. configPportPrimaryTable -- 1.3.4. configPportFecTable -- 1.3.1. ontFindConfigTable ------------------------------ ontFindConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF OntFindConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont find config table" ::= { configPport 1 } ontFindConfigEntry OBJECT-TYPE SYNTAX OntFindConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont find config table" INDEX { cpSlotIndex, cpPportIndex } ::= { ontFindConfigTable 1 } OntFindConfigEntry ::= SEQUENCE { cpSlotIndex INTEGER, cpPportIndex INTEGER, ontFindConfigEnable INTEGER, ontFindConfigInterval INTEGER, ontFindConfigAgeEnable INTEGER, ontFindConfigAgingTime INTEGER, ontFindConfigMinDistance INTEGER, ontFindConfigMaxDistance INTEGER, ontFindDistanceRowStatus RowStatus } cpSlotIndex OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "slot index, range <0-5>." ::= { ontFindConfigEntry 1 } cpPportIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "pon port index, range <1-16>." ::= { ontFindConfigEntry 2 } ontFindConfigEnable OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "ontFindConfigEnable: 0 disable 1 enable" ::= { ontFindConfigEntry 3 } ontFindConfigInterval OBJECT-TYPE SYNTAX INTEGER(3..30) MAX-ACCESS read-write STATUS current DESCRIPTION "ont find interval time,range <3-30> seconds." ::= { ontFindConfigEntry 4 } ontFindConfigAgeEnable OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "ontFindConfigAgeEnable: 0 disable 1 enable" ::= { ontFindConfigEntry 5 } ontFindConfigAgingTime OBJECT-TYPE SYNTAX INTEGER(1..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "ont find list aging time,range <1-86400> seconds." ::= { ontFindConfigEntry 6 } ontFindConfigMinDistance OBJECT-TYPE SYNTAX INTEGER(0..40) MAX-ACCESS read-write STATUS current DESCRIPTION "ont find min distance,range <0-40> km." ::= { ontFindConfigEntry 7 } ontFindConfigMaxDistance OBJECT-TYPE SYNTAX INTEGER(0..60) MAX-ACCESS read-write STATUS current DESCRIPTION "ont find min distance,range <0-60> km." ::= { ontFindConfigEntry 8 } ontFindDistanceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { ontFindConfigEntry 9 } -- 1.3.2. ontSilentConfigTable ---------------------------- ontSilentConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF OntSilentConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont silent config table" ::= { configPport 2 } ontSilentConfigEntry OBJECT-TYPE SYNTAX OntSilentConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont silent config table" INDEX { cpSlotIndexI, cpPportIndexI } ::= { ontSilentConfigTable 1 } OntSilentConfigEntry ::= SEQUENCE { cpSlotIndexI INTEGER, cpPportIndexI INTEGER, ontSilentConfigAuthFailEnable INTEGER, ontSilentConfigAuthFailTime INTEGER, ontSilentConfigOfflineEnable INTEGER, ontSilentConfigOfflineTime INTEGER } cpSlotIndexI OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "slot index, range <0-5>." ::= { ontSilentConfigEntry 1 } cpPportIndexI OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "pon port index, range <1-16>." ::= { ontSilentConfigEntry 2 } ontSilentConfigAuthFailEnable OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "ontSilentConfigAuthFailEnable: 0 disable 1 enable" ::= { ontSilentConfigEntry 3 } ontSilentConfigAuthFailTime OBJECT-TYPE SYNTAX INTEGER(1..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "ont silent auth fail silence time, range <1-86400> seconds." ::= { ontSilentConfigEntry 4 } ontSilentConfigOfflineEnable OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "ontSilentConfigOfflineEnable: 0 disable 1 enable" ::= { ontSilentConfigEntry 5 } ontSilentConfigOfflineTime OBJECT-TYPE SYNTAX INTEGER(1..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "ont silent offline silence time, range <1-86400> seconds." ::= { ontSilentConfigEntry 6 } -- config pport primary table ------------------------------------ configPportPrimaryTable OBJECT-TYPE SYNTAX SEQUENCE OF ConfigPportPrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "status pport primary table" ::= { configPport 3 } configPportPrimaryEntry OBJECT-TYPE SYNTAX ConfigPportPrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont find list table" INDEX { cpSlotIndexII, cpPportIndexII } ::= { configPportPrimaryTable 1 } ConfigPportPrimaryEntry ::= SEQUENCE { cpSlotIndexII INTEGER, cpPportIndexII INTEGER, pportAdminStatus INTEGER, pportLaserEnable INTEGER } cpSlotIndexII OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { configPportPrimaryEntry 1 } cpPportIndexII OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { configPportPrimaryEntry 2 } pportAdminStatus OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "pportAdminStatus: 0 shutdown 1 no shutdown(default)" ::= { configPportPrimaryEntry 3 } pportLaserEnable OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "pportLaserEnable: 0 disable 1 enable(default)" ::= { configPportPrimaryEntry 4 } -- config pport fec table ------------------------------------ configPportFecTable OBJECT-TYPE SYNTAX SEQUENCE OF ConfigPportFecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "config pon port fec table" ::= { configPport 4 } configPportFecEntry OBJECT-TYPE SYNTAX ConfigPportFecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of pon port fec table" INDEX { cpSlotIndexII, cpPportIndexII } ::= { configPportFecTable 1 } ConfigPportFecEntry ::= SEQUENCE { cpSlotIndexIII INTEGER, cpPportIndexIII INTEGER, pportFecStatus INTEGER } cpSlotIndexIII OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { configPportFecEntry 1 } cpPportIndexIII OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { configPportFecEntry 2 } pportFecStatus OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "pportFecStatus: 0 disable(default) 1 enable" ::= { configPportFecEntry 3 } -------------------------------------------------------------- ------------------ 1.4. config ont ------------------------ -------------------------------------------------------------- -- 1.4.1. ontManageTable -- 1.4.2. ontUpgradeTable -- 1.4.3. ontPortTable -- 1.4.1. ontManageTable ---------------------------------- ontManageTable OBJECT-TYPE SYNTAX SEQUENCE OF OntManageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont management table, such as reboot, ont statistics ethport switch, etc." ::= { configOnt 1 } ontManageEntry OBJECT-TYPE SYNTAX OntManageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont silent config table" INDEX { coSlotIndex, coPportIndex, coOntOnlineIndex } ::= { ontManageTable 1 } OntManageEntry ::= SEQUENCE { coSlotIndex INTEGER, coPportIndex INTEGER, coOntOnlineIndex INTEGER, ontStatisticsEth INTEGER, ontStatisticsGem INTEGER, ontReboot INTEGER, ontAdminState INTEGER, ontFactorySet INTEGER, protocolPort80 INTEGER, restoreFactory INTEGER } coSlotIndex OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontManageEntry 1 } coPportIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontManageEntry 2 } coOntOnlineIndex OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "Ont online index, the 3rd index of this table. range is <1-128>" ::= { ontManageEntry 3 } ontStatisticsEth OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "ontStatisticsEth: 0 disable(default) 1 enable." ::= { ontManageEntry 4 } ontStatisticsGem OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "ontStatisticsGem: 0 disable(default) 1 enable" ::= { ontManageEntry 5 } ontReboot OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "set ontReboot=1 to reboot the ont, when read, always 0." ::= { ontManageEntry 6 } ontAdminState OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "ontAdminState: 0 deactive 1 active(default)" ::= { ontManageEntry 7 } ontFactorySet OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "set ontFactorySet=1 to factory setting the ont, when read, always 0." ::= { ontManageEntry 8 } protocolPort80 OBJECT-TYPE SYNTAX INTEGER { disable_discard(0), disable_forward(1), enable_discard(2), enable_forward(3), init(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "set protocol-port-80 disable mode discard or enable mode forward." ::= { ontManageEntry 9 } restoreFactory OBJECT-TYPE SYNTAX INTEGER { wan(0), wifi(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "factory setting restore. 0: wan 1: wifi" ::= { ontManageEntry 10 } -- 1.4.2. ontUpgradeTable ---------------------------------- ontUpgradeTable OBJECT-IDENTITY STATUS current DESCRIPTION "ont upgrade table" ::= { configOnt 2 } ontUpgradeEntry OBJECT IDENTIFIER ::= { ontUpgradeTable 1 } OntUpgradeEntry ::= SEQUENCE { ontUpgradeIdList OCTET STRING, ontUpgradeSn OCTET STRING, ontUpgradeParams INTEGER, ontUpgradeRowStatus RowStatus } ontUpgradeIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "ont upgrade ont-id list." ::= { ontUpgradeEntry 1 } ontUpgradeSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "ont upgrade ont sn." ::= { ontUpgradeEntry 2 } ontUpgradeParams OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "ontUpgradeParams: 0 ont upgrade 1 ont upgrade commit. 2 ont auto-reboot 3 ont manual-reboot" ::= { ontUpgradeEntry 3 } ontUpgradeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus" ::= { ontUpgradeEntry 4 } -- 1.4.3. ontPortTable ---------------------------------- ontPortTable OBJECT-TYPE SYNTAX SEQUENCE OF OntPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont port table, port config." ::= { configOnt 3 } ontPortEntry OBJECT-TYPE SYNTAX OntPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont port config table" INDEX { ontPortSlotIndex, ontPortPportIndex, ontPortOntOnlineIndex, ontPortOntPortIndex } ::= { ontPortTable 1 } OntPortEntry ::= SEQUENCE { ontPortSlotIndex INTEGER, ontPortPportIndex INTEGER, ontPortOntOnlineIndex INTEGER, ontPortOntPortIndex INTEGER, ontPortShutdown INTEGER } ontPortSlotIndex OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontPortEntry 1 } ontPortPportIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontPortEntry 2 } ontPortOntOnlineIndex OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "Ont online index, the 3rd index of this table. range is <1-128>" ::= { ontPortEntry 3 } ontPortOntPortIndex OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-only STATUS current DESCRIPTION "Ont port index, the 4th index of this table, range is <1-24>" ::= { ontPortEntry 4 } ontPortShutdown OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "ontPortShutdown: 0 enable(default) 1 disable" ::= { ontPortEntry 5 } -------------------------------------------------------------- ------------------ 2.1. status device ---------------------- -------------------------------------------------------------- -- 2.1.1. deployStatus -- 2.1.2. deployHistoryTable -- 2.1.3. statusDeviceBaseInfo -- 2.1.1. deployStatus ------------------------------------ deployStatus OBJECT IDENTIFIER ::= { statusDevice 1 } deployStatusUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "user name of deploy permission owner." ::= { deployStatus 1 } deployStatusTerminal OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "terminal of deploy permission owner." ::= { deployStatus 2 } deployStatusUserIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "ip address of deploy permission owner." ::= { deployStatus 3 } deployStatusRequestTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "request time of deploy permission owner." ::= { deployStatus 4 } deployStatusLastActiveTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "last active time of deploy permission owner." ::= { deployStatus 5 } -- 2.1.2. deployHistoryTable ------------------------------ deployHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF DeployHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "deploy history table" ::= { statusDevice 2 } deployHistoryEntry OBJECT-TYPE SYNTAX DeployHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of deploy history table" INDEX { deployHistoryIndex } ::= { deployHistoryTable 1 } DeployHistoryEntry ::= SEQUENCE { deployHistoryIndex INTEGER, deployHistoryUserName OCTET STRING, deployHistoryTerminal OCTET STRING, deployHistoryUserIp IpAddress, deployHistoryRequestTime OCTET STRING, deployHistoryActiveTimeList OCTET STRING, deployHistoryReleaseTime OCTET STRING } deployHistoryIndex OBJECT-TYPE SYNTAX INTEGER(0..19) MAX-ACCESS read-only STATUS current DESCRIPTION "index of deploy history table." ::= { deployHistoryEntry 1 } deployHistoryUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "user name of deploy history entry." ::= { deployHistoryEntry 2 } deployHistoryTerminal OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "terminal of deploy history entry." ::= { deployHistoryEntry 3 } deployHistoryUserIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "ip address of deploy history entry." ::= { deployHistoryEntry 4 } deployHistoryRequestTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "request time of deploy history entry. format: yyyy-mm-dd hh:mm:ss" ::= { deployHistoryEntry 5 } deployHistoryActiveTimeList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "active time list of deploy history entry. format: yyyy-mm-dd hh:mm:ss,...,.." ::= { deployHistoryEntry 6 } deployHistoryReleaseTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "release time of deploy history entry. format: yyyy-mm-dd hh:mm:ss" ::= { deployHistoryEntry 7 } -- 2.1.3. statusDeviceBaseInfo ---------------------------- statusDeviceBaseInfo OBJECT IDENTIFIER ::= { statusDevice 3 } cpuUsePercent OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of use CPU in current system." ::= { statusDeviceBaseInfo 1 } memUsePercent OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of use memory in current system." ::= { statusDeviceBaseInfo 2 } switchChipTemperature OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of switch chip in current system." ::= { statusDeviceBaseInfo 3 } ponChipTemperature OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of pon chip in current system." ::= { statusDeviceBaseInfo 4 } ontImageName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont image name " ::= { statusDeviceBaseInfo 5 } ontImageLen OBJECT-TYPE SYNTAX INTEGER (0..26214400) MAX-ACCESS read-only STATUS current DESCRIPTION "ont image length " ::= { statusDeviceBaseInfo 6 } -------------------------------------------------------------- ------------------ 2.2. status slot ------------------------ -------------------------------------------------------------- -- 2.2.1. statusSlotPrimaryTable -- slot status primary table ------------------------------ statusSlotPrimaryTable OBJECT-TYPE SYNTAX SEQUENCE OF StatusSlotPrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "slot status primary table" ::= { statusSlot 1 } statusSlotPrimaryEntry OBJECT-TYPE SYNTAX StatusSlotPrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of slot status primary table" INDEX { ssSlotIndex } ::= { statusSlotPrimaryTable 1 } StatusSlotPrimaryEntry ::= SEQUENCE { ssSlotIndex INTEGER, slotState INTEGER, slotConfigType INTEGER, slotTrueType INTEGER, slotTypeIsPon INTEGER, slotConnected INTEGER, slotMac MacAddress, slotSwVersion OCTET STRING, slotHwVersion OCTET STRING } ssSlotIndex OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "slot index rang is 0 to 5" ::= { statusSlotPrimaryEntry 1 } slotState OBJECT-TYPE SYNTAX INTEGER(0..10) MAX-ACCESS read-only STATUS current DESCRIPTION "typedef enum { STATUS_DOWN = 0, STATUS_INIT, STATUS_LOAD, STATUS_REG, STATUS_CONFIG, STATUS_ONLINE }SLOT_STATUS_ENUM;" ::= { statusSlotPrimaryEntry 2 } slotConfigType OBJECT-TYPE SYNTAX INTEGER(0..10) MAX-ACCESS read-only STATUS current DESCRIPTION "typedef enum tag_BOARD_TYPE { BOARD_TYPE_NULL = 0, BOARD_TYPE_CONTROL_BCM5670, BOARD_TYPE_LINE_24_GE_FIBER_BCM56504, BOARD_TYPE_LINE_24_GE_COPPER_BCM56504, BOARD_TYPE_LINE_24_GE_COPPER_BCM56524, BOARD_TYPE_LINE_8_10GE_FIBER_BCM56820, BOARD_TYPE_LINE_8PON_6GE_BCM56524, BOARD_TYPE_CONTROL_BCM56720, BOARD_TYPE_LINE_8GPON_8GE_BCM56684, BOARD_TYPE_LINE_4pon_4_10GE_BCM56821, BOARD_TYPE_NUM }BOARD_TYPE; " ::= { statusSlotPrimaryEntry 3 } slotTrueType OBJECT-TYPE SYNTAX INTEGER(0..10) MAX-ACCESS read-only STATUS current DESCRIPTION "typedef enum tag_BOARD_TYPE { BOARD_TYPE_NULL = 0, BOARD_TYPE_CONTROL_BCM5670, BOARD_TYPE_LINE_24_GE_FIBER_BCM56504, BOARD_TYPE_LINE_24_GE_COPPER_BCM56504, BOARD_TYPE_LINE_24_GE_COPPER_BCM56524, BOARD_TYPE_LINE_8_10GE_FIBER_BCM56820, BOARD_TYPE_LINE_8PON_6GE_BCM56524, BOARD_TYPE_CONTROL_BCM56720, BOARD_TYPE_LINE_8GPON_8GE_BCM56684, BOARD_TYPE_LINE_4pon_4_10GE_BCM56821, BOARD_TYPE_NUM }BOARD_TYPE;" ::= { statusSlotPrimaryEntry 4 } slotTypeIsPon OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "slotTypeIsPon: 1 true 0 false" ::= { statusSlotPrimaryEntry 5 } slotConnected OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "slotConnected: 1 true 0 false" ::= { statusSlotPrimaryEntry 6 } slotMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "slot mac address" ::= { statusSlotPrimaryEntry 7 } slotSwVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "slotSwVersion" ::= { statusSlotPrimaryEntry 8 } slotHwVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "slotHwVersion" ::= { statusSlotPrimaryEntry 9 } -------------------------------------------------------------- ------------------ 2.3. status pport ---------------------- -------------------------------------------------------------- -- 2.3.1. ontFindListTable -- 2.3.2. ontSilentListTable -- 2.3.3. pportSfpTable -- 2.3.4. statusPportPrimaryTable -- 2.3.5. portUtilizationTable -- ont find list table ------------------------------------ ontFindListTable OBJECT-TYPE SYNTAX SEQUENCE OF OntFindListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont find list table" ::= { statusPport 1 } ontFindListEntry OBJECT-TYPE SYNTAX OntFindListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont find list table" INDEX { spSlotIndex, spPportIndex, ontFindListListId } ::= { ontFindListTable 1 } OntFindListEntry ::= SEQUENCE { spSlotIndex INTEGER, spPportIndex INTEGER, ontFindListListId INTEGER, ontFindListSn OCTET STRING, ontFindListPw OCTET STRING, ontFindListLoid OCTET STRING, ontFindListLopw OCTET STRING, ontFindListVendorId OCTET STRING, ontFindListPriSwVer OCTET STRING, ontFindListSecSwVer OCTET STRING, ontFindListHwVer OCTET STRING, ontFindListEquipId OCTET STRING, ontFindListFirstFindTime OCTET STRING, ontFindListLastFindTime OCTET STRING, ontFindListFindCnt OCTET STRING } spSlotIndex OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontFindListEntry 1 } spPportIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontFindListEntry 2 } ontFindListListId OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont find list table." ::= { ontFindListEntry 3 } ontFindListSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "serial number of ont find list entry." ::= { ontFindListEntry 4 } ontFindListPw OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "password of ont find list entry." ::= { ontFindListEntry 5 } ontFindListLoid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "logic id of ont find list entry." ::= { ontFindListEntry 6 } ontFindListLopw OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "logic password of ont find list entry." ::= { ontFindListEntry 7 } ontFindListVendorId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "vendor id of ont find list entry." ::= { ontFindListEntry 8 } ontFindListPriSwVer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "primary software version of ont find list entry." ::= { ontFindListEntry 9 } ontFindListSecSwVer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "secondary software version of ont find list entry." ::= { ontFindListEntry 10 } ontFindListHwVer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "hardware version of ont find list entry." ::= { ontFindListEntry 11 } ontFindListEquipId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "equipment id of ont find list entry." ::= { ontFindListEntry 12 } ontFindListFirstFindTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "first find time of ont find list entry." ::= { ontFindListEntry 13 } ontFindListLastFindTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "last find time of ont find list entry." ::= { ontFindListEntry 14 } ontFindListFindCnt OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "find count of ont find list entry." ::= { ontFindListEntry 15 } -- ont silent list table ---------------------------------- ontSilentListTable OBJECT-TYPE SYNTAX SEQUENCE OF OntSilentListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont silent list table" ::= { statusPport 2 } ontSilentListEntry OBJECT-TYPE SYNTAX OntSilentListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont find list table" INDEX { spSlotIndexI, spPportIndexI, ontSilentListListId } ::= { ontSilentListTable 1 } OntSilentListEntry ::= SEQUENCE { spSlotIndexI INTEGER, spPportIndexI INTEGER, ontSilentListListId INTEGER, ontSilentListSn OCTET STRING, ontSilentListTime INTEGER, ontSilentListReason OCTET STRING } spSlotIndexI OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontSilentListEntry 1 } spPportIndexI OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontSilentListEntry 2 } ontSilentListListId OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont silent list table." ::= { ontSilentListEntry 3 } ontSilentListSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "serial number of ont silent list entry." ::= { ontSilentListEntry 4 } ontSilentListTime OBJECT-TYPE SYNTAX INTEGER(1..86400) MAX-ACCESS read-only STATUS current DESCRIPTION "remain time of ont silent list entry, unit is second." ::= { ontSilentListEntry 5 } ontSilentListReason OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "silent reason of ont silent list entry." ::= { ontSilentListEntry 6 } -- 2.3.1. pportSfpTable ------------------------------ pportSfpTable OBJECT-TYPE SYNTAX SEQUENCE OF PportSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "pport sfp info table" ::= { statusPport 3 } pportSfpEntry OBJECT-TYPE SYNTAX PportSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of pport sfp info table" INDEX { spSlotIndexII, spPportIndexII } ::= { pportSfpTable 1 } PportSfpEntry ::= SEQUENCE { spSlotIndexII INTEGER, spPportIndexII INTEGER, sfpTransceiverType OCTET STRING, sfpCompliance OCTET STRING, sfpConnectorType OCTET STRING, sfpWaveLength OCTET STRING, sfpTransferDistance OCTET STRING, sfpDigitalDiagMonitor OCTET STRING, sfpManuSerialNumber OCTET STRING, sfpManufacturingDate OCTET STRING, sfpVendorName OCTET STRING, sfpTemperature OCTET STRING, sfpVoltage OCTET STRING, sfpBiasCurrent OCTET STRING, sfpBiasHighThreshold OCTET STRING, sfpBiasLowThreshold OCTET STRING, sfpRXPower OCTET STRING, sfpRXPowerHighThreshold OCTET STRING, sfpRXPowerLowThreshold OCTET STRING, sfpTXPower OCTET STRING, sfpTXPowerHighThreshold OCTET STRING, sfpTXPowerLowThreshold OCTET STRING, sfpExist INTEGER, sfpLinkState INTEGER, sfpModuleType INTEGER, sfpModuleSubType INTEGER, sfpUsedType INTEGER, sfpPartNumber OCTET STRING } spSlotIndexII OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { pportSfpEntry 1 } spPportIndexII OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { pportSfpEntry 2 } sfpTransceiverType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp transceiver type." ::= { pportSfpEntry 3 } sfpCompliance OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp compliance." ::= { pportSfpEntry 4 } sfpConnectorType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp connector type." ::= { pportSfpEntry 5 } sfpWaveLength OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp wave length." ::= { pportSfpEntry 6 } sfpTransferDistance OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp transfer distance." ::= { pportSfpEntry 7 } sfpDigitalDiagMonitor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp digital diagnostic monitoring." ::= { pportSfpEntry 8 } sfpManuSerialNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp manufacturing serial number." ::= { pportSfpEntry 9 } sfpManufacturingDate OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp manufacturing date." ::= { pportSfpEntry 10 } sfpVendorName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp vendor name." ::= { pportSfpEntry 11 } sfpTemperature OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp temperature(°C)." ::= { pportSfpEntry 12 } sfpVoltage OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp voltage(V)." ::= { pportSfpEntry 13 } sfpBiasCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp bias current(mA)." ::= { pportSfpEntry 14 } sfpBiasHighThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp bias high threshold(mA)." ::= { pportSfpEntry 15 } sfpBiasLowThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp bias low threshold(mA)." ::= { pportSfpEntry 16 } sfpRXPower OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp rx power(dBm)." ::= { pportSfpEntry 17 } sfpRXPowerHighThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp rx power high threshold(dBm)." ::= { pportSfpEntry 18 } sfpRXPowerLowThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp rx power low threshold(dBm)." ::= { pportSfpEntry 19 } sfpTXPower OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp tx power(dBm)." ::= { pportSfpEntry 20 } sfpTXPowerHighThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp tx power high threshold(dBm)." ::= { pportSfpEntry 21 } sfpTXPowerLowThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp tx power low threshold(dBm)." ::= { pportSfpEntry 22 } sfpExist OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "sfpExist: 0 false 1 true" ::= { pportSfpEntry 23 } sfpLinkState OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "sfpLinkState: 0 link down 1 link up" ::= { pportSfpEntry 24 } sfpModuleType OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "sfpModuleType: 0 unknown 1 GPON" ::= { pportSfpEntry 25 } sfpModuleSubType OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "sfpModuleSubType: 0 unknown 1 Class B+ 2 Class C+" ::= { pportSfpEntry 26 } sfpUsedType OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "sfpModuleSubType: 0 unknown 1 ONT" ::= { pportSfpEntry 27 } sfpPartNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Sfp manufacturing type." ::= { pportSfpEntry 28 } -- status pport primary table statusPportPrimaryTable OBJECT-TYPE SYNTAX SEQUENCE OF StatusPportPrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "status pport primary table" ::= { statusPport 4 } statusPportPrimaryEntry OBJECT-TYPE SYNTAX StatusPportPrimaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont find list table" INDEX { spSlotIndexIII, spPportIndexIII } ::= { statusPportPrimaryTable 1 } StatusPportPrimaryEntry ::= SEQUENCE { spSlotIndexIII INTEGER, spPportIndexIII INTEGER, pportLinkStatus INTEGER } spSlotIndexIII OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { statusPportPrimaryEntry 1 } spPportIndexIII OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { statusPportPrimaryEntry 2 } pportLinkStatus OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "pportLinkStatus: 0 link down 1 link up" ::= { statusPportPrimaryEntry 3 } -- port utilization table ------------------------------------ portUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF PortUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "port utilization table" ::= { statusPport 5 } portUtilizationEntry OBJECT-TYPE SYNTAX PortUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of port utilization table" INDEX { spSlotIndexPort, spPortIndex } ::= { portUtilizationTable 1 } PortUtilizationEntry ::= SEQUENCE { spSlotIndexPort INTEGER, spPortIndex INTEGER, spUtilizeTxOctetsRate INTEGER, spUtilizeRxOctetsRate INTEGER, spUtilizeTxBwThoughput INTEGER, spUtilizeRxBwThoughput INTEGER, spUtilizeTxPktsRate INTEGER, spUtilizeRxPktsRate INTEGER, spUtilizeTxOctetsMaxRate INTEGER, spUtilizeRxOctetsMaxRate INTEGER } spSlotIndexPort OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { portUtilizationEntry 1 } spPortIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of port, should in <1-16>." ::= { portUtilizationEntry 2 } spUtilizeTxOctetsRate OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port tx octets rate." ::= { portUtilizationEntry 3 } spUtilizeRxOctetsRate OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port rx octets rate." ::= { portUtilizationEntry 4 } spUtilizeTxBwThoughput OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "port tx bandwidth thoughput." ::= { portUtilizationEntry 5 } spUtilizeRxBwThoughput OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "port rx bandwidth thoughput." ::= { portUtilizationEntry 6 } spUtilizeTxPktsRate OBJECT-TYPE SYNTAX INTEGER(0..1600000000) MAX-ACCESS read-only STATUS current DESCRIPTION "port tx packets rate." ::= { portUtilizationEntry 7 } spUtilizeRxPktsRate OBJECT-TYPE SYNTAX INTEGER(0..1600000000) MAX-ACCESS read-only STATUS current DESCRIPTION "port rx packets rate." ::= { portUtilizationEntry 8 } spUtilizeTxOctetsMaxRate OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port tx octets max rate." ::= { portUtilizationEntry 9 } spUtilizeRxOctetsMaxRate OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port rx octets max rate." ::= { portUtilizationEntry 10 } -------------------------------------------------------------- ------------------ 2.4. status ont ------------------------ -------------------------------------------------------------- -- 2.4.1 ontInfo -- 2.4.2 ontEthPortInfo -- 2.4.3 ontGemPortInfo -- 2.4.4 ontWanInfo -- 2.4.5 ontPotsInfo -- ont infomation ------------------------------------------ ontInfo OBJECT IDENTIFIER ::= { statusOnt 1 } -- 2.4.1.1 ontBaseInfoTable -- 2.4.1.2 ontVersionInfoTable -- 2.4.1.3 ontCapabilityTable -- 2.4.1.4 ontOpticalInfoTable -- 2.4.1.5 ontProfileInfoTable -- 2.4.1.6 ontUpgradeStatusTable -- 2.4.1.7 ontStatisticsTable -- 2.4.1.8 ontUtilizationTable -- 2.4.1.9 ontOpticalSwTable -- 2.4.1.10 ontMacAddrTable -- ont base status table ---------------------------------- ontBaseInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OntBaseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont base infomation table" ::= { ontInfo 1 } ontBaseInfoEntry OBJECT-TYPE SYNTAX OntBaseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont base infomation table" INDEX { soSlotIndex, soPportIndex, soOntIndex } ::= { ontBaseInfoTable 1 } OntBaseInfoEntry ::= SEQUENCE { soSlotIndex INTEGER, soPportIndex INTEGER, soOntIndex INTEGER, ontDescription OCTET STRING, ontDeviceType OCTET STRING, ontRunStatus INTEGER, ontDistance OCTET STRING, ontSn OCTET STRING, ontPw OCTET STRING, ontLoid OCTET STRING, ontLopw OCTET STRING, ontOfflineReason OCTET STRING, ontOnOfflineTime OCTET STRING, ontUpDownTime OCTET STRING } soSlotIndex OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontBaseInfoEntry 1 } soPportIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontBaseInfoEntry 2 } soOntIndex OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontBaseInfoEntry 3 } ontDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont description." ::= { ontBaseInfoEntry 4 } ontDeviceType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont device type." ::= { ontBaseInfoEntry 5 } ontRunStatus OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "ontRunStatus: 0 offline 1 online" ::= { ontBaseInfoEntry 6 } ontDistance OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont distance." ::= { ontBaseInfoEntry 7 } ontSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont serial number, hex string format." ::= { ontBaseInfoEntry 8 } ontPw OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont password, hex string format." ::= { ontBaseInfoEntry 9 } ontLoid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "logical ont id, Charactor format." ::= { ontBaseInfoEntry 10 } ontLopw OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "logical ont password, Charactor format." ::= { ontBaseInfoEntry 11 } ontOfflineReason OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont off line reason. 0: NONE Reason get fail 原因获取失败 1: DEACTIVATION ONT DEACTIVED ONT去激活 2: ACK_TIMEOUT ONT acknowledge time out ONT确认响应超时 3: SFI Signal fail of ONT ONT信号失效 4: TIWI Transmission interface warning ONT传输端口警示 5: PASSWORD_AUTHENTICATION ONT password authentication fail ONT密码认证失败 6: LOSI Loss of signal for ONT ONT上行信号丢失 7: LOS Loss of signal for OLT OLT上行信号丢失 8: LOKI Loss of key synch with ONT ONT同步密钥丢失 9: RERANGE_FAILURE ONT re-ranging fail ONT重测距失败 10: LOFI Loss of frame of ONT ONT上行帧丢失 11: POWER_OFF ONT power off ONT掉电 12: UNKNOWN UNKNOWN 未知 13: LOAMI Loss of PLOAM for ONT ONT上行PLOAM丢失 " ::= { ontBaseInfoEntry 12 } ontOnOfflineTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont on/off line time." ::= { ontBaseInfoEntry 13 } ontUpDownTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont up/down time." ::= { ontBaseInfoEntry 14 } -- ont version info table ---------------------------------- ontVersionInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OntVersionInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont version info table" ::= { ontInfo 2 } ontVersionInfoEntry OBJECT-TYPE SYNTAX OntVersionInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont version info table" INDEX { soSlotIndexI, soPportIndexI, soOntIndexI } ::= { ontVersionInfoTable 1 } OntVersionInfoEntry ::= SEQUENCE { soSlotIndexI INTEGER, soPportIndexI INTEGER, soOntIndexI INTEGER, ontVendorId OCTET STRING, ontVersion OCTET STRING, ontEquipmentId OCTET STRING, ontMainSwVersion OCTET STRING, ontSecondSwVersion OCTET STRING } soSlotIndexI OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontVersionInfoEntry 1 } soPportIndexI OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontVersionInfoEntry 2 } soOntIndexI OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontVersionInfoEntry 3 } ontVendorId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont vendor id." ::= { ontVersionInfoEntry 4 } ontVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont version." ::= { ontVersionInfoEntry 5 } ontEquipmentId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont equipment id." ::= { ontVersionInfoEntry 6 } ontMainSwVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont primary software version." ::= { ontVersionInfoEntry 7 } ontSecondSwVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont secondary software version." ::= { ontVersionInfoEntry 8 } -- ont capability info table ------------------------------ ontCapabilityTable OBJECT-TYPE SYNTAX SEQUENCE OF OntCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont capability info table." ::= { ontInfo 3 } ontCapabilityEntry OBJECT-TYPE SYNTAX OntCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont capability info table" INDEX { soSlotIndexII, soPportIndexII, soOntIndexII } ::= { ontCapabilityTable 1 } OntCapabilityEntry ::= SEQUENCE { soSlotIndexII INTEGER, soPportIndexII INTEGER, soOntIndexII INTEGER, ontCapEquipId OCTET STRING, ontUplinkPonPortsNum INTEGER, ontPotsPortsNum INTEGER, ontEthPortsNum INTEGER, ontTdmPortsNum INTEGER, ontMocaPortsNum INTEGER, ontCatvAniPortsNum INTEGER, ontCatvUniPortsNum INTEGER, ontTcontsNum INTEGER, ontGemPortsNum INTEGER, ontTrafficSchedulersNum INTEGER, ontPqsInTconts OCTET STRING, ontIpConfigSupport OCTET STRING, ontFlowCtrlType OCTET STRING, ontTXpowerCutOffSupport OCTET STRING, ontDbaMethod OCTET STRING } soSlotIndexII OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontCapabilityEntry 1 } soPportIndexII OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontCapabilityEntry 2 } soOntIndexII OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontCapabilityEntry 3 } ontCapEquipId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont equipment id." ::= { ontCapabilityEntry 4 } ontUplinkPonPortsNum OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "number of uplink PON ports." ::= { ontCapabilityEntry 5 } ontPotsPortsNum OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "number of POTS ports." ::= { ontCapabilityEntry 6 } ontEthPortsNum OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "number of ETH ports." ::= { ontCapabilityEntry 7 } ontTdmPortsNum OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "number of TDM ports." ::= { ontCapabilityEntry 8 } ontMocaPortsNum OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "number of MOCA ports." ::= { ontCapabilityEntry 9 } ontCatvAniPortsNum OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "number of CATV ANI ports." ::= { ontCapabilityEntry 10 } ontCatvUniPortsNum OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "number of CATV UNI ports." ::= { ontCapabilityEntry 11 } ontTcontsNum OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "number of T-CONTs." ::= { ontCapabilityEntry 12 } ontGemPortsNum OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "number of GEM ports." ::= { ontCapabilityEntry 13 } ontTrafficSchedulersNum OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "number of traffic schedulers." ::= { ontCapabilityEntry 14 } ontPqsInTconts OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont support ip configuration or not." ::= { ontCapabilityEntry 15 } ontIpConfigSupport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont support ip configuration or not." ::= { ontCapabilityEntry 16 } ontFlowCtrlType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont flow control type." ::= { ontCapabilityEntry 17 } ontTXpowerCutOffSupport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont support TX power cut off or not." ::= { ontCapabilityEntry 18 } ontDbaMethod OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont dba method. NSR(default): not support SR SR: support SR -: invalid" ::= { ontCapabilityEntry 19 } -- ont optical info table ---------------------------------- ontOpticalInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OntOpticalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont optical info table" ::= { ontInfo 4 } ontOpticalInfoEntry OBJECT-TYPE SYNTAX OntOpticalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont optical info table" INDEX { soSlotIndexIII, soPportIndexIII, soOntIndexIII } ::= { ontOpticalInfoTable 1 } OntOpticalInfoEntry ::= SEQUENCE { soSlotIndexIII INTEGER, soPportIndexIII INTEGER, soOntIndexIII INTEGER, ontVoltage OCTET STRING, ontRXPower OCTET STRING, ontTXPower OCTET STRING, ontBiasCurrent OCTET STRING, ontTemperature OCTET STRING, ontRxCatvPower OCTET STRING, ontTxCatvPower OCTET STRING, ontOltRxPower OCTET STRING, ontOltTxPower OCTET STRING } soSlotIndexIII OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontOpticalInfoEntry 1 } soPportIndexIII OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontOpticalInfoEntry 2 } soOntIndexIII OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontOpticalInfoEntry 3 } ontVoltage OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont power feed voltage(V)." ::= { ontOpticalInfoEntry 4 } ontRXPower OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont received optical power(dBm)." ::= { ontOpticalInfoEntry 5 } ontTXPower OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont mean optical launch power(dBm)." ::= { ontOpticalInfoEntry 6 } ontBiasCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont laser bias current(uA)." ::= { ontOpticalInfoEntry 7 } ontTemperature OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont temperature(°C)." ::= { ontOpticalInfoEntry 8 } ontRxCatvPower OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont received catv power(dBm)." ::= { ontOpticalInfoEntry 9 } ontTxCatvPower OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont transmitted catv power(dBmV)." ::= { ontOpticalInfoEntry 10 } ontOltRxPower OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "olt received ont power(dBm)." ::= { ontOpticalInfoEntry 11 } ontOltTxPower OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "olt transmitted power(dBm)." ::= { ontOpticalInfoEntry 12 } -- ont profile info table ---------------------------------- ontProfileInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OntProfileInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont optical info table" ::= { ontInfo 5 } ontProfileInfoEntry OBJECT-TYPE SYNTAX OntProfileInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont profile info table" INDEX { soSlotIndexIV, soPportIndexIV, soOntIndexIV } ::= { ontProfileInfoTable 1 } OntProfileInfoEntry ::= SEQUENCE { soSlotIndexIV INTEGER, soPportIndexIV INTEGER, soOntIndexIV INTEGER, ontProfileSn OCTET STRING, ontProfileVlanIdxes OCTET STRING, ontProfileVlanNames OCTET STRING, ontProfileUsIdxes OCTET STRING, ontProfileUsNames OCTET STRING, ontProfileDsIdxes OCTET STRING, ontProfileDsNames OCTET STRING, ontProfileDbaIdxes OCTET STRING, ontProfileDbaNames OCTET STRING, ontProfileLineIdx INTEGER, ontProfileLineName OCTET STRING, ontProfileRuleIdx INTEGER, ontProfileRuleName OCTET STRING, ontProfileUniqueIdx OCTET STRING, ontProfileUniqueName OCTET STRING } soSlotIndexIV OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontProfileInfoEntry 1 } soPportIndexIV OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontProfileInfoEntry 2 } soOntIndexIV OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontProfileInfoEntry 3 } ontProfileSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont sn" ::= { ontProfileInfoEntry 4 } ontProfileVlanIdxes OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "vlan indexes ont used, such as '100,200,233'. if no vlan used, '-'." ::= { ontProfileInfoEntry 5 } ontProfileVlanNames OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "vlan names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no vlan used, '-'. Name list may too long to show. Suggest use ontProfileVlanIdxes above." -- 每个 name 的最大长度是 127，如果配的很长，而且使用了多个条目，就有可能超过 255 个 -- 字节。此时返回值会截取到少于 255 字节（但不截掉最后一个逗号','，以表示还有没返回的） ::= { ontProfileInfoEntry 6 } ontProfileUsIdxes OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "us traffic indexes ont used, such as '100,200,233'. if no us traffic used, '-'." ::= { ontProfileInfoEntry 7 } ontProfileUsNames OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "us traffic names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no us used, '-'. Name list may too long to show. Suggest use ontProfileVlanIdxes above." -- 每个 name 的最大长度是 127，如果配的很长，而且使用了多个条目，就有可能超过 255 个 -- 字节。此时返回值会截取到少于 255 字节（但不截掉最后一个逗号','，以表示还有没返回的） ::= { ontProfileInfoEntry 8 } ontProfileDsIdxes OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ds traffic indexes ont used, such as '100,200,233'. if no ds traffic used, '-'." ::= { ontProfileInfoEntry 9 } ontProfileDsNames OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ds traffic names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no ds used, '-'. Name list may too long to show. Suggest use ontProfileVlanIdxes above." -- 每个 name 的最大长度是 127，如果配的很长，而且使用了多个条目，就有可能超过 255 个 -- 字节。此时返回值会截取到少于 255 字节（但不截掉最后一个逗号','，以表示还有没返回的） ::= { ontProfileInfoEntry 10 } ontProfileDbaIdxes OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "dba indexes ont used, such as '100,200,233'. if no dba used, '-'." ::= { ontProfileInfoEntry 11 } ontProfileDbaNames OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "dba names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no dba used, '-'. Name list may too long to show. Suggest use ontProfileVlanIdxes above." -- 每个 name 的最大长度是 127，如果配的很长，而且使用了多个条目，就有可能超过 255 个 -- 字节。此时返回值会截取到少于 255 字节（但不截掉最后一个逗号','，以表示还有没返回的） ::= { ontProfileInfoEntry 12 } ontProfileLineIdx OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "line id ont used." ::= { ontProfileInfoEntry 13 } ontProfileLineName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "line name ont used." ::= { ontProfileInfoEntry 14 } ontProfileRuleIdx OBJECT-TYPE SYNTAX INTEGER(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "rule id ont used." ::= { ontProfileInfoEntry 15 } ontProfileRuleName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "rule name ont used." ::= { ontProfileInfoEntry 16 } ontProfileUniqueIdx OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "unique id ont used. if no unique used, '-'" ::= { ontProfileInfoEntry 17 } ontProfileUniqueName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "unique name ont used. if no unique used, '-'" ::= { ontProfileInfoEntry 18 } -- ont upgrade status table -------------------------------- ontUpgradeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF OntUpgradeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont upgrade status table" ::= { ontInfo 6 } ontUpgradeStatusEntry OBJECT-TYPE SYNTAX OntUpgradeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont upgrade status table" INDEX { soSlotIndexV, soPportIndexV, soOntIndexV } ::= { ontUpgradeStatusTable 1 } OntUpgradeStatusEntry ::= SEQUENCE { soSlotIndexV INTEGER, soPportIndexV INTEGER, soOntIndexV INTEGER, ontUpgradeActiveVer OCTET STRING, ontUpgradeInactiveVer OCTET STRING, ontUpgradeStatus OCTET STRING } soSlotIndexV OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontUpgradeStatusEntry 1 } soPportIndexV OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontUpgradeStatusEntry 2 } soOntIndexV OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontUpgradeStatusEntry 3 } ontUpgradeActiveVer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont upgrade active version." ::= { ontUpgradeStatusEntry 4 } ontUpgradeInactiveVer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont upgrade inactive version." ::= { ontUpgradeStatusEntry 5 } ontUpgradeStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont upgrade status, such as success, crc error, timeout, offline, 0%-100%." ::= { ontUpgradeStatusEntry 6 } -- ont statistics table ------------------------------------ ontStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF OntStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont statistics table" ::= { ontInfo 7 } ontStatisticsEntry OBJECT-TYPE SYNTAX OntStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont statistics table" INDEX { soSlotIndexX, soPportIndexX, soOntIndexX } ::= { ontStatisticsTable 1 } OntStatisticsEntry ::= SEQUENCE { soSlotIndexX INTEGER, soPportIndexX INTEGER, soOntIndexX INTEGER, ontUsFrames OCTET STRING, ontUsBytes OCTET STRING, ontDsFrames OCTET STRING, ontDsBytes OCTET STRING, ontUsRate OCTET STRING, ontDsRate OCTET STRING } soSlotIndexX OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontStatisticsEntry 1 } soPportIndexX OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontStatisticsEntry 2 } soOntIndexX OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontStatisticsEntry 3 } ontUsFrames OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont upstream frames." ::= { ontStatisticsEntry 4 } ontUsBytes OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont upstream bytes." ::= { ontStatisticsEntry 5 } ontDsFrames OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont downstream frames." ::= { ontStatisticsEntry 6 } ontDsBytes OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont downstream bytes." ::= { ontStatisticsEntry 7 } ontUsRate OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont upstream rate." ::= { ontStatisticsEntry 8 } ontDsRate OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont downstream rate." ::= { ontStatisticsEntry 9 } -- ont utilization table ------------------------------------ ontUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF OntUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont utilization table" ::= { ontInfo 8 } ontUtilizationEntry OBJECT-TYPE SYNTAX OntUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont utilization table" INDEX { soSlotIndexXII, soPportIndexXII, soOntIndexXII } ::= { ontUtilizationTable 1 } OntUtilizationEntry ::= SEQUENCE { soSlotIndexXII INTEGER, soPportIndexXII INTEGER, soOntIndexXII INTEGER, soUtilizeTxOctetsRate INTEGER, soUtilizeRxOctetsRate INTEGER, soUtilizeTxPktsRate INTEGER, soUtilizeRxPktsRate INTEGER, soUtilizeTxOctets INTEGER, soUtilizeRxOctets INTEGER, soUtilizeTxPktsError INTEGER, soUtilizeRxPktsError INTEGER, soUtilizeTxPktsDiscard INTEGER, soUtilizeRxPktsDiscard INTEGER, soUtilizeTxThroughput INTEGER, soUtilizeRxThroughput INTEGER } soSlotIndexXII OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontUtilizationEntry 1 } soPportIndexXII OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontUtilizationEntry 2 } soOntIndexXII OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontUtilizationEntry 3 } soUtilizeTxOctetsRate OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont tx octets rate." ::= { ontUtilizationEntry 4 } soUtilizeRxOctetsRate OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont rx octets rate." ::= { ontUtilizationEntry 5 } soUtilizeTxPktsRate OBJECT-TYPE SYNTAX INTEGER(0..1600000000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont tx packets rate(pps)." ::= { ontUtilizationEntry 6 } soUtilizeRxPktsRate OBJECT-TYPE SYNTAX INTEGER(0..1600000000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont rx packets rate(pps)." ::= { ontUtilizationEntry 7 } soUtilizeTxOctets OBJECT-TYPE SYNTAX INTEGER(0..1600000000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont tx octets in 15 minutes." ::= { ontUtilizationEntry 8 } soUtilizeRxOctets OBJECT-TYPE SYNTAX INTEGER(0..1600000000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont rx octets in 15 minutes." ::= { ontUtilizationEntry 9 } soUtilizeTxPktsError OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port tx packets error in 15 minute." ::= { ontUtilizationEntry 10 } soUtilizeRxPktsError OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port rx packets error in 15 minute." ::= { ontUtilizationEntry 11 } soUtilizeTxPktsDiscard OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port tx packets discard in 15 minute." ::= { ontUtilizationEntry 12 } soUtilizeRxPktsDiscard OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port rx packets discard in 15 minute." ::= { ontUtilizationEntry 13 } soUtilizeTxThroughput OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "port tx throughput." ::= { ontUtilizationEntry 14 } soUtilizeRxThroughput OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "port rx throughput." ::= { ontUtilizationEntry 15 } -- ont optical software table ---------------------------------- ontOpticalSwTable OBJECT-TYPE SYNTAX SEQUENCE OF OntOpticalSwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont optical software table" ::= { ontInfo 9 } ontOpticalSwEntry OBJECT-TYPE SYNTAX OntOpticalSwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont optical software table" INDEX { soSlotIndexXV, soPportIndexXV, soOntIndexXV } ::= { ontOpticalSwTable 1 } OntOpticalSwEntry ::= SEQUENCE { soSlotIndexXV INTEGER, soPportIndexXV INTEGER, soOntIndexXV INTEGER, ontVoltageI OCTET STRING, ontRXPowerI OCTET STRING, ontTXPowerI OCTET STRING, ontBiasCurrentI OCTET STRING, ontTemperatureI OCTET STRING, ontRxCatvPowerI OCTET STRING, ontTxCatvPowerI OCTET STRING } soSlotIndexXV OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontOpticalSwEntry 1 } soPportIndexXV OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontOpticalSwEntry 2 } soOntIndexXV OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontOpticalSwEntry 3 } ontVoltageI OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont power feed voltage(V)." ::= { ontOpticalSwEntry 4 } ontRXPowerI OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont received optical power(dBm)." ::= { ontOpticalSwEntry 5 } ontTXPowerI OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont mean optical launch power(dBm)." ::= { ontOpticalSwEntry 6 } ontBiasCurrentI OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont laser bias current(uA)." ::= { ontOpticalSwEntry 7 } ontTemperatureI OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont temperature(°C)." ::= { ontOpticalSwEntry 8 } ontRxCatvPowerI OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont received catv power(dBm)." ::= { ontOpticalSwEntry 9 } ontTxCatvPowerI OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont transmitted catv power(dBmV)." ::= { ontOpticalSwEntry 10 } -- ont mac address table ---------------------------------- ontMacAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF OntMacAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont mac address table" ::= { ontInfo 10 } ontMacAddrEntry OBJECT-TYPE SYNTAX OntMacAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont mac address table" INDEX { ontMacAddrVid, ontMacAddress} ::= { ontMacAddrTable 1 } OntMacAddrEntry ::= SEQUENCE { ontMacAddrVid INTEGER, ontMacAddress MacAddress, ontMacAddrSlot INTEGER, ontMacAddrPport INTEGER, ontMacAddrOnt INTEGER, ontMacAddrSn OCTET STRING, ontMacAddrGemU INTEGER, ontMacAddrGem INTEGER } ontMacAddrVid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan id index of ontMacAddrTable, should in <1-4094>." ::= { ontMacAddrEntry 1 } ontMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The mac address index of ontMacAddrTable." ::= { ontMacAddrEntry 2 } ontMacAddrSlot OBJECT-TYPE SYNTAX INTEGER(0..11) MAX-ACCESS read-only STATUS current DESCRIPTION "The slot of ontMacAddrEntry, should in <0-11>. Should in <1-128>." ::= { ontMacAddrEntry 3 } ontMacAddrPport OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The pon port of ontMacAddrEntry, should in <1-16>" ::= { ontMacAddrEntry 4 } ontMacAddrOnt OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The ont id of ontMacAddrEntry, should in <1-128>" ::= { ontMacAddrEntry 5 } ontMacAddrSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ont sn of ontMacAddrEntry." ::= { ontMacAddrEntry 6 } ontMacAddrGemU OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-only STATUS current DESCRIPTION "The ont user gem of ontMacAddrEntry, should in <1-1024> 0: none 1-1024: valid" ::= { ontMacAddrEntry 7 } ontMacAddrGem OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The ont gem of ontMacAddrEntry, should in <0-4095>" ::= { ontMacAddrEntry 8 } -- ont ethernet port infomation ---------------------------- ontEthPortInfo OBJECT IDENTIFIER ::= { statusOnt 2 } -- 2.4.2.1 ontEthportStateTable -- 2.4.2.2 ontEthportStatisRecTable -- 2.4.2.3 ontEthportStatisSentTable -- 2.4.2.4 ontEthportUtilizationTable -- ont ethport state table -------------------------------- ontEthportStateTable OBJECT-TYPE SYNTAX SEQUENCE OF OntEthportStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont ethport state table" ::= { ontEthPortInfo 1 } ontEthportStateEntry OBJECT-TYPE SYNTAX OntEthportStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont ethport state table" INDEX { soSlotIndexVI, soPportIndexVI, soOntIndexVI, soOntEthportIndex } ::= { ontEthportStateTable 1 } OntEthportStateEntry ::= SEQUENCE { soSlotIndexVI INTEGER, soPportIndexVI INTEGER, soOntIndexVI INTEGER, soOntEthportIndex INTEGER, ontEthportAdminStatus OCTET STRING, ontEthportConnectState OCTET STRING, ontEthportPortSpeed OCTET STRING } soSlotIndexVI OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontEthportStateEntry 1 } soPportIndexVI OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontEthportStateEntry 2 } soOntIndexVI OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontEthportStateEntry 3 } soOntEthportIndex OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont ethernet port, the 4th index of this table. range <1-n> is determined by ont type, the max n is 2.4." ::= { ontEthportStateEntry 4 } ontEthportAdminStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont ethernet port admin status: 0 enable 1 disable." ::= { ontEthportStateEntry 5 } ontEthportConnectState OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont ethernet port connect state." ::= { ontEthportStateEntry 6 } ontEthportPortSpeed OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "ont ethernet port speed." -- 1，2，3 分别是十兆百兆千兆全双工 -- 17,18,19 分别是十兆百兆千兆半双工 ::= { ontEthportStateEntry 7 } -- ont etherport statistics receive table ---------------------- ontEthportStatisRecTable OBJECT-TYPE SYNTAX SEQUENCE OF OntEthportStatisRecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont etherport statistics receive table" ::= { ontEthPortInfo 2 } ontEthportStatisRecEntry OBJECT-TYPE SYNTAX OntEthportStatisRecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont etherport statistics receive table" INDEX { soSlotIndexVII, soPportIndexVII, soOntIndexVII, soOntEthportIndexI } ::= { ontEthportStatisRecTable 1 } OntEthportStatisRecEntry ::= SEQUENCE { soSlotIndexVII INTEGER, soPportIndexVII INTEGER, soOntIndexVII INTEGER, soOntEthportIndexI INTEGER, ontEthportRecFrames INTEGER, ontEthportRecUniFrames INTEGER, ontEthportRecMulFrames INTEGER, ontEthportRecBroFrames INTEGER, ontEthportRec64Frames INTEGER, ontEthportRec65Frames INTEGER, ontEthportRec128Frames INTEGER, ontEthportRec256Frames INTEGER, ontEthportRec512Frames INTEGER, ontEthportRec1024Frames INTEGER, ontEthportRecUndFrames INTEGER, ontEthportRecOveFrames INTEGER, ontEthportRecFragments INTEGER, ontEthportRecJabbers INTEGER, ontEthportRecFcsFrames INTEGER, ontEthportDisFrames INTEGER, ontEthportRecAliFrames INTEGER, ontEthportMacRecFrames INTEGER, ontEthportPppFrames INTEGER, ontEthportBufReceive INTEGER, ontEthportRecBytes INTEGER } soSlotIndexVII OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontEthportStatisRecEntry 1 } soPportIndexVII OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontEthportStatisRecEntry 2 } soOntIndexVII OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontEthportStatisRecEntry 3 } soOntEthportIndexI OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont ethernet port, the 4th index of this table. range <1-n> is determined by ont type, the max n is 2.4." ::= { ontEthportStatisRecEntry 4 } ontEthportRecFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received frames" ::= { ontEthportStatisRecEntry 5 } ontEthportRecUniFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received unicast frames" ::= { ontEthportStatisRecEntry 6 } ontEthportRecMulFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received multicast frames" ::= { ontEthportStatisRecEntry 7 } ontEthportRecBroFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received broadcast frames" ::= { ontEthportStatisRecEntry 8 } ontEthportRec64Frames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received 64-byte frames" ::= { ontEthportStatisRecEntry 9 } ontEthportRec65Frames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received 65~127-byte frames" ::= { ontEthportStatisRecEntry 10 } ontEthportRec128Frames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received 128~255-byte frames" ::= { ontEthportStatisRecEntry 11 } ontEthportRec256Frames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received 256~511-byte frames" ::= { ontEthportStatisRecEntry 12 } ontEthportRec512Frames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received 512~1023-byte frames" ::= { ontEthportStatisRecEntry 13 } ontEthportRec1024Frames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received 1024~1518-byte frames" ::= { ontEthportStatisRecEntry 14 } ontEthportRecUndFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received undersize frames" ::= { ontEthportStatisRecEntry 15 } ontEthportRecOveFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received oversize frames" ::= { ontEthportStatisRecEntry 16 } ontEthportRecFragments OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received fragments" ::= { ontEthportStatisRecEntry 17 } ontEthportRecJabbers OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received jabbers" ::= { ontEthportStatisRecEntry 18 } ontEthportRecFcsFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received FCS error frames" ::= { ontEthportStatisRecEntry 19 } ontEthportDisFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Discard frames" ::= { ontEthportStatisRecEntry 20 } ontEthportRecAliFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received alignment error frames" ::= { ontEthportStatisRecEntry 21 } ontEthportMacRecFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "MAC sub-layer received error frames" ::= { ontEthportStatisRecEntry 22 } ontEthportPppFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "PPPOE filtered frames" ::= { ontEthportStatisRecEntry 23 } ontEthportBufReceive OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Buffer overflows on receive" ::= { ontEthportStatisRecEntry 24 } ontEthportRecBytes OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Received bytes" ::= { ontEthportStatisRecEntry 25 } -- ont etherport statistics sent table ---------------------- ontEthportStatisSentTable OBJECT-TYPE SYNTAX SEQUENCE OF OntEthportStatisSentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont etherport statistics sent table" ::= { ontEthPortInfo 3 } ontEthportStatisSentEntry OBJECT-TYPE SYNTAX OntEthportStatisSentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont etherport statistics sent table" INDEX { soSlotIndexXI, soPportIndexXI, soOntIndexXI, soOntEthportIndexIII } ::= { ontEthportStatisSentTable 1 } OntEthportStatisSentEntry ::= SEQUENCE { soSlotIndexXI INTEGER, soPportIndexXI INTEGER, soOntIndexXI INTEGER, soOntEthportIndexIII INTEGER, ontEthportSenFrames INTEGER, ontEthportSenUniFrames INTEGER, ontEthportSenMulFrames INTEGER, ontEthportSenBroFrames INTEGER, ontEthportCarFrames INTEGER, ontEthportSqeMessages INTEGER, ontEthportSenSinFrames INTEGER, ontEthportSenMulColFrames INTEGER, ontEthportSenExcFrames INTEGER, ontEthportLatFrames INTEGER, ontEthportMacSenFrames INTEGER, ontEthportBufTransmit INTEGER, ontEthportSentBytes INTEGER } soSlotIndexXI OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontEthportStatisSentEntry 1 } soPportIndexXI OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontEthportStatisSentEntry 2 } soOntIndexXI OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontEthportStatisSentEntry 3 } soOntEthportIndexIII OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont ethernet port, the 4th index of this table. range <1-n> is determined by ont type, the max n is 2.4." ::= { ontEthportStatisSentEntry 4 } ontEthportSenFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Sent frames" ::= { ontEthportStatisSentEntry 5 } ontEthportSenUniFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Sent unicast frames" ::= { ontEthportStatisSentEntry 6 } ontEthportSenMulFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Sent multicast frames" ::= { ontEthportStatisSentEntry 7 } ontEthportSenBroFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Sent broadcast frames" ::= { ontEthportStatisSentEntry 8 } ontEthportCarFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Carrier sense error frames" ::= { ontEthportStatisSentEntry 9 } ontEthportSqeMessages OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "SQE test error messages" ::= { ontEthportStatisSentEntry 10 } ontEthportSenSinFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Sent single collision frames" ::= { ontEthportStatisSentEntry 11 } ontEthportSenMulColFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Sent multiple collision frames" ::= { ontEthportStatisSentEntry 12 } ontEthportSenExcFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Sent excessive collision frames" ::= { ontEthportStatisSentEntry 13 } ontEthportLatFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Late collision frames" ::= { ontEthportStatisSentEntry 14 } ontEthportMacSenFrames OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "MAC sub-layer sent error frames" ::= { ontEthportStatisSentEntry 15 } ontEthportBufTransmit OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Buffer overflows on transmit" ::= { ontEthportStatisSentEntry 16 } ontEthportSentBytes OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Sent bytes " ::= { ontEthportStatisSentEntry 17 } -- ont ethport utilization table ------------------------ ontEthportUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF OntEthportUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont ethport multicast mac table" ::= { ontEthPortInfo 4 } ontEthportUtilizationEntry OBJECT-TYPE SYNTAX OntEthportUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont ethport multicast mac table" INDEX { soSlotIndexVIII, soPportIndexVIII, soOntIndexVIII, soOntEthportIndexII } ::= { ontEthportUtilizationTable 1 } OntEthportUtilizationEntry ::= SEQUENCE { soSlotIndexVIII INTEGER, soPportIndexVIII INTEGER, soOntIndexVIII INTEGER, soOntEthportIndexII INTEGER, soEportUtilizeTxOctetsRate INTEGER, soEportUtilizeRxOctetsRate INTEGER, soEportUtilizeTxPktsRate INTEGER, soEportUtilizeRxPktsRate INTEGER, soEportUtilizeTxOctets INTEGER, soEportUtilizeRxOctets INTEGER, soEportUtilizeTxPktsError INTEGER, soEportUtilizeRxPktsError INTEGER, soEportUtilizeTxPktsDiscard INTEGER, soEportUtilizeRxPktsDiscard INTEGER } soSlotIndexVIII OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontEthportUtilizationEntry 1 } soPportIndexVIII OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontEthportUtilizationEntry 2 } soOntIndexVIII OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontEthportUtilizationEntry 3 } soOntEthportIndexII OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont ethernet port, the 4th index of this table. range <1-n> is determined by ont type, the max n is 2.4." ::= { ontEthportUtilizationEntry 4 } soEportUtilizeTxOctetsRate OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont tx octets rate." ::= { ontEthportUtilizationEntry 5 } soEportUtilizeRxOctetsRate OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont rx octets rate." ::= { ontEthportUtilizationEntry 6 } soEportUtilizeTxPktsRate OBJECT-TYPE SYNTAX INTEGER(0..1600000000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont tx packets rate(pps)." ::= { ontEthportUtilizationEntry 7 } soEportUtilizeRxPktsRate OBJECT-TYPE SYNTAX INTEGER(0..1600000000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont rx packets rate(pps)." ::= { ontEthportUtilizationEntry 8 } soEportUtilizeTxOctets OBJECT-TYPE SYNTAX INTEGER(0..1600000000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont tx octets in 15 minutes." ::= { ontEthportUtilizationEntry 9 } soEportUtilizeRxOctets OBJECT-TYPE SYNTAX INTEGER(0..1600000000) MAX-ACCESS read-only STATUS current DESCRIPTION "ont rx octets in 15 minutes." ::= { ontEthportUtilizationEntry 10 } soEportUtilizeTxPktsError OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port tx packets error in 15 minute." ::= { ontEthportUtilizationEntry 11 } soEportUtilizeRxPktsError OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port rx packets error in 15 minute." ::= { ontEthportUtilizationEntry 12 } soEportUtilizeTxPktsDiscard OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port tx packets discard in 15 minute." ::= { ontEthportUtilizationEntry 13 } soEportUtilizeRxPktsDiscard OBJECT-TYPE SYNTAX INTEGER(0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "port rx packets discard in 15 minute." ::= { ontEthportUtilizationEntry 14 } -- ont gemport infomation ---------------------------------- ontGemPortInfo OBJECT IDENTIFIER ::= { statusOnt 3 } -- 2.4.3.1 ontGemportStatisticsTable -- ont gemport statistics table ---------------------------- ontGemportStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF OntGemportStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont gemport statistics table" ::= { ontGemPortInfo 1 } ontGemportStatisticsEntry OBJECT-TYPE SYNTAX OntGemportStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont gemport statistics table" INDEX { soSlotIndexIX, soPportIndexIX, soOntIndexIX, ontGemportStaFrameType, ontGemportStaIndex } ::= { ontGemportStatisticsTable 1 } OntGemportStatisticsEntry ::= SEQUENCE { soSlotIndexIX INTEGER, soPportIndexIX INTEGER, soOntIndexIX INTEGER, ontGemportStaFrameType INTEGER, ontGemportStaIndex INTEGER, ontGemportStaUpdateData INTEGER, ontGemportLostFrame INTEGER, ontGemportRecFrame INTEGER, ontGemportRecBlock INTEGER, ontGemportSentFrame INTEGER, ontGemportSentBlock INTEGER } soSlotIndexIX OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontGemportStatisticsEntry 1 } soPportIndexIX OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontGemportStatisticsEntry 2 } soOntIndexIX OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontGemportStatisticsEntry 3 } ontGemportStaFrameType OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "ontGemportStaFrameTpte: 0----unicast 1----multicast 2----broadcast" ::= { ontGemportStatisticsEntry 4 } ontGemportStaIndex OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-only STATUS current DESCRIPTION "ontGemportStaIndex: The index should be inputed with <1-24>" ::= { ontGemportStatisticsEntry 5 } ontGemportStaUpdateData OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "Set ontGemportStaUpdateData=2 to update data of the entry. then you can read this node. still 2 means update incomplete, 0 means update successfully, 1 means update failed. If you don't update the data of the entry, the value you get maybe not newest." ::= { ontGemportStatisticsEntry 6 } ontGemportLostFrame OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "ontGemportLostFrame" ::= { ontGemportStatisticsEntry 7 } ontGemportRecFrame OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "ontGemportRecFrame" ::= { ontGemportStatisticsEntry 8 } ontGemportRecBlock OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "ontGemportRecBlock" ::= { ontGemportStatisticsEntry 9 } ontGemportSentFrame OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "ontGemportSentFrame" ::= { ontGemportStatisticsEntry 10 } ontGemportSentBlock OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "ontGemportSentBlock" ::= { ontGemportStatisticsEntry 11 } -- ont wan infomation -------------------------------------- ontWanInfo OBJECT IDENTIFIER ::= { statusOnt 4 } -- 2.4.4.1 ontWanInfoTable -- ont wan infomation table -------------------------------- ontWanInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OntWanInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont wan infomation table" ::= { ontWanInfo 1 } ontWanInfoEntry OBJECT-TYPE SYNTAX OntWanInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont wan infomation table" INDEX { soSlotIndexXIII, soPportIndexXIII, soOntIndexXIII, ontWanIndex} ::= { ontWanInfoTable 1 } OntWanInfoEntry ::= SEQUENCE { soSlotIndexXIII INTEGER, soPportIndexXIII INTEGER, soOntIndexXIII INTEGER, ontWanIndex INTEGER, ontWanServerType OCTET STRING, ontWanIp IpAddress, ontWanMask IpAddress, ontWanGateway IpAddress, ontWanPriDns IpAddress, ontWanSecDns IpAddress } soSlotIndexXIII OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontWanInfoEntry 1 } soPportIndexXIII OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontWanInfoEntry 2 } soOntIndexXIII OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontWanInfoEntry 3 } ontWanIndex OBJECT-TYPE SYNTAX INTEGER(1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "ontWanIndex: The index should be inputed with <1-4>" ::= { ontWanInfoEntry 4 } ontWanServerType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "ont wan server type." -- 业务类型(IPTV TR069 INTERNET VOIP可组合，如IPTV_TR069_INTERNET_VOIP) ::= { ontWanInfoEntry 5 } ontWanIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "ontGemportLostFrame" ::= { ontWanInfoEntry 6 } ontWanMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "ontGemportRecFrame" ::= { ontWanInfoEntry 7 } ontWanGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "ontGemportRecBlock" ::= { ontWanInfoEntry 8 } ontWanPriDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "ontWanInfoEntry" ::= { ontWanInfoEntry 9 } ontWanSecDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "ontGemportSentBlock" ::= { ontWanInfoEntry 10 } -- ont pots infomation -------------------------------------- ontPotsInfo OBJECT IDENTIFIER ::= { statusOnt 5 } -- 2.4.5.1 ontPotsInfoTable -- ont pots infomation table -------------------------------- ontPotsInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OntPotsInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont pots infomation table" ::= { ontPotsInfo 1 } ontPotsInfoEntry OBJECT-TYPE SYNTAX OntPotsInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ont pots infomation table" INDEX { soSlotIndexXIV, soPportIndexXIV, soOntIndexXIV, ontPotsIndex} ::= { ontPotsInfoTable 1 } OntPotsInfoEntry ::= SEQUENCE { soSlotIndexXIV INTEGER, soPportIndexXIV INTEGER, soOntIndexXIV INTEGER, ontPotsIndex INTEGER, ontPotsStatus INTEGER } soSlotIndexXIV OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { ontPotsInfoEntry 1 } soPportIndexXIV OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of pon port, should in <1-16>." ::= { ontPotsInfoEntry 2 } soOntIndexXIV OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ont, the 3rd index of this table. Should in <1-128>." ::= { ontPotsInfoEntry 3 } ontPotsIndex OBJECT-TYPE SYNTAX INTEGER(1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "ontWanIndex: The index should be inputed with <1-2>" ::= { ontPotsInfoEntry 4 } ontPotsStatus OBJECT-TYPE SYNTAX INTEGER(0..14) MAX-ACCESS read-write STATUS current DESCRIPTION "typedef enum tag_M_ONT_POTS_STATUS { /* 0 */ POTS_STATUS_INIT = 0, /* None/initial */ /* 1 */ POTS_STATUS_REGISTERED, /* Registered */ /* 2 */ POTS_STATUS_IN_SESSION, /* In session */ /* 3 */ POTS_STATUS_REG_ICMP_ERR, /* Failed registration –icmp error */ /* 4 */ POTS_STATUS_REG_TCP_FAIL, /* Failed registration –failed tcp */ /* 5 */ POTS_STATUS_REG_TMOUT, /* Failed registration –timeout */ /* 6 */ POTS_STATUS_REG_AUTH_FAIL, /* Failed registration - failed authentication */ /* 7 */ POTS_STATUS_REG_SRV_FAIL, /* Failed registration - server fail code */ /* 8 */ POTS_STATUS_INV_ICMP_ERR, /* Failed invite –icmp error */ /* 9 */ POTS_STATUS_INV_TCP_FAIL, /* Failed invite –failed tcp */ /* 10 */ POTS_STATUS_INV_AUTH_FAIL, /* Failed invite –failed authentication */ /* 11 */ POTS_STATUS_INV_TMOUT, /* Failed invite –timeout */ /* 12 */ POTS_STATUS_INV_SRV_FAIL, /* Failed invite –server fail code */ /* 13 */ POTS_STATUS_PORT_NOT_CFG, /* Port not configured */ /* 14 */ POTS_STATUS_CFG_DONE, /* Config done */ POTS_STATUS_SUM }M_ONT_POTS_STATUS;" ::= { ontPotsInfoEntry 5 } -------------------------------------------------------------- ------------------ 2.5. status trap ------------------------ -------------------------------------------------------------- -- 2.5.1. deviceTrap -- 2.5.2. slotTrap -- 2.5.3. portTrap -- 2.5.4. ontTrap -- 2.5.5. ontPortTrap -- 2.5.6. trapInfo -- 2.5.7. trapSetThreshold -- 2.5.8. trapClearThreshold ------ deviceTrap ------------------------------------------ deviceTrap OBJECT IDENTIFIER ::= { statusTrap 1 } oltSwitchOverTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "olt contrl-board switchover trap." --olt主控板主备倒换 ::= { deviceTrap 1 } oltFanStatusTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapExtraInfo } STATUS current DESCRIPTION "olt fan status change trap. gponTrapExtraInfo: 1 stop 2 start 3 remove 4 insert" --olt风扇状态trap ::= { deviceTrap 2 } oltPowerStatusTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapExtraInfo } STATUS current DESCRIPTION "olt power status trap." --olt电源状态trap true ::= { deviceTrap 3 } oltTemperatureTrap NOTIFICATION-TYPE OBJECTS { gponTrapStatus, gponTrapExtraInfo } STATUS current DESCRIPTION "olt switch chip temperature trap. gponTrapExtraInfo: 1 low 2 high" --olt 交换芯片温度trap true ::= { deviceTrap 4 } oltPonTemperatureTrap NOTIFICATION-TYPE OBJECTS { gponTrapStatus, gponTrapExtraInfo } STATUS current DESCRIPTION "olt pon chip temperature trap. gponTrapExtraInfo: 1 low 2 high" --olt pon 芯片温度trap true ::= { deviceTrap 5 } unitOfflineAlarmTrap NOTIFICATION-TYPE OBJECTS { gponTrapStatus } STATUS current DESCRIPTION "unit offline alarm trap." --olt offline 告警 true ::= { deviceTrap 6 } oltDgTrap NOTIFICATION-TYPE OBJECTS { gponTrapStatus } STATUS current DESCRIPTION "unit dying gasp trap." --olt 掉电告警 ::= { deviceTrap 7 } edfaTrap NOTIFICATION-TYPE OBJECTS { gponTrapExtraInfo, gponTrapSfpPerformanceStatus } STATUS current DESCRIPTION "edfa trap. gponTrapExtraInfo: 1 Optical Input Power 1 2 Optical Input Power 2 3 Optical Output Power 4 Pump 1 Bias Current 5 Pump 1 Pump Temperature 6 Pump 1 Pump Tec 7 Pump 2 Bias Current 8 Pump 2 Pump Temperature 9 Pump 2 Pump Tec 10 DC Voltage 11 Internal Temperature" ::= { deviceTrap 8 } oltDooralmTrap NOTIFICATION-TYPE OBJECTS { gponTrapStatus } STATUS current DESCRIPTION "olt door alarm trap." --olt 开箱告警 ::= { deviceTrap 9 } warningPortAlarmTrap NOTIFICATION-TYPE OBJECTS { gponTrapWarnPortIndex, gponTrapWarnPortAlarm } STATUS current DESCRIPTION "Warning port alarm." --olt 告警端口告警 ::= { deviceTrap 10 } ------ slotTrap -------------------------------------------- slotTrap OBJECT IDENTIFIER ::= { statusTrap 2 } oltBoardStatusTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapExtraInfo } STATUS current DESCRIPTION "olt board status trap." --olt 板状态改变（包括主控，业务板插入，移除，连接） ::= { slotTrap 1 } ------ portTrap ------------------------------------------ portTrap OBJECT IDENTIFIER ::= { statusTrap 3 } oltPortRingTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus } STATUS current DESCRIPTION "olt port ring trap." --olt端口环路trap ::= { portTrap 1 } oltPortSdTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus } STATUS current DESCRIPTION "olt port sd trap." --olt端口 sd trap true ::= { portTrap 2 } oltPportLOSTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus } STATUS current DESCRIPTION "olt pon port LOS trap. " --olt pon 端口 LOS trap true ::= { portTrap 3 } oltPortSfpTcrossTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapStatus, gponTrapExtraInfo } STATUS current DESCRIPTION "olt sfp threshold crossing alert trap. gponTrapExtraInfo: 1 recieve high 2 recieve low 3 send high 4 send low" --olt 光模块参数越限告警 trap ::= { portTrap 4 } oltPortSfpUnplugTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus, gponTrapSn } STATUS current DESCRIPTION "olt pon port sfp unplug trap. " --olt pon 端口光模块被拔出 trap true ::= { portTrap 5 } oltPortUdldTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapExtraInfo } STATUS current DESCRIPTION "UniDirectional Link Detection trap. gponTrapExtraInfo: 1 Undetermined 2 Unidirectional 3 Bidirectional" --olt 端口单向链路检测 trap true -- 1 未确定 2 单通 3 双通 ::= { portTrap 6 } oltPportLOFTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus } STATUS current DESCRIPTION "olt pon port LOF trap. " --olt pon 端口 LOF trap true ::= { portTrap 7 } oltPortCRCTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus } STATUS current DESCRIPTION "olt port CRC trap. " --olt 端口 CRC trap ::= { portTrap 8 } oltPportRegOverTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapStatus } STATUS current DESCRIPTION "olt pon port register over trap. " --olt pon 端口注册个数越限 trap ::= { portTrap 9 } ------ ontTrap -------------------------------------------- ontTrap OBJECT IDENTIFIER ::= { statusTrap 4 } ontOnlineStatusTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapStatus, gponTrapSn, gponTrapLoid } STATUS current DESCRIPTION "ont online status trap." --ont上下线状态trap true ::= { ontTrap 1 } ont9843Trap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapExtraInfo } STATUS current DESCRIPTION "ont 984.3 warning trap. gponTrapExtraInfo: warning type: 1 LOSi 2 LOFi 3 DOWi 4 SFi 5 SDi 6 LCDGi 7 RDIi 8 SUFi 9 DFi 10 LOAi 11 LOKi 12 TIWi 13 DGi 14 LOAMi 15 MEMi 16 MISi 17 PEEi 18 ERRi 19 REIi" --ont 984.3 告警 trap true ::= { ontTrap 2 } ontRogueTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapStatus, gponTrapExtraInfo } STATUS current DESCRIPTION "Rogue ont trap. gponTrapExtraInfo: rogue type: 1 continuous 2 intermittent " --流氓ont trap（包括长发光和间歇性发光） ::= { ontTrap 3 } ontAuthFailTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapSn } STATUS current DESCRIPTION "ont authentication failure trap." --ont认证失败trap ::= { ontTrap 4 } ontSfpTcrossTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapStatus, gponTrapExtraInfo } STATUS current DESCRIPTION "ont sfp threshold crossing alert trap. gponTrapExtraInfo: 1 recieve high 2 recieve low 3 send high 4 send low" --olt 光模块参数越限告警 trap ::= { ontTrap 5 } ------ ontPortTrap ------------------------------------------ ontPortTrap OBJECT IDENTIFIER ::= { statusTrap 5 } ontEthPortStatusTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapOntEthportId, gponTrapStatus } STATUS current DESCRIPTION "ont ethernet port status trap." --ont以太网端口状态trap ::= { ontPortTrap 1 } ontEthPortRingTrap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapOntEthportId, gponTrapStatus } STATUS current DESCRIPTION "ont ethernet port ring trap." --ont以太网端口环路trap ::= { ontPortTrap 2 } ontPotsH248Trap NOTIFICATION-TYPE OBJECTS { gponTrapSlotId, gponTrapPortId, gponTrapOntId, gponTrapExtraId, gponTrapStatus } STATUS current DESCRIPTION "ont pots h248 link trap. gponTrapExtraId: ont pots number" --ont语音端口链路告警trap ::= { ontPortTrap 3 } ------ trapInfo -------------------------------------- trapInfo OBJECT IDENTIFIER ::= { statusTrap 6 } gponTrapSlotId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "slot-id/fan-id/power-id in trap " ::= { trapInfo 1 } gponTrapPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "port id in trap " ::= { trapInfo 2 } gponTrapOntId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "ont id in trap " ::= { trapInfo 3 } gponTrapOntEthportId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "ont ethernet port id in trap " ::= { trapInfo 4 } gponTrapExtraId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "other id in trap, etc." ::= { trapInfo 5 } gponTrapStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "1 alarm/linkdown/offline/open box 0 clear/linkup/online/close box" ::= { trapInfo 6 } gponTrapExtraInfo OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "trap extra infomation" ::= { trapInfo 7 } gponTrapSn OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "sn use for trap." ::= { trapInfo 8 } gponTrapLoid OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "sn use for trap." ::= { trapInfo 9 } gponTrapSfpPerformanceStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "0 normal 1 lolo 2 lo 3 hi 4 hihi" ::= { trapInfo 10 } gponTrapWarnPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Warn index 1 to 8" ::= { trapInfo 11 } gponTrapWarnPortAlarm OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "0 clear 1 warn" ::= { trapInfo 12 } ------ trapSetThreshold -------------------------------------- trapSetThreshold OBJECT IDENTIFIER ::= { statusTrap 7 } thresholdTemperatureHigh OBJECT-TYPE SYNTAX INTEGER (-99..99) MAX-ACCESS read-write STATUS current DESCRIPTION "temperature high threshold, default 60(℃)." ::= { trapSetThreshold 1 } thresholdTemperatureLow OBJECT-TYPE SYNTAX INTEGER (-99..99) MAX-ACCESS read-write STATUS current DESCRIPTION "temperature low threshold, default -25(℃)." ::= { trapSetThreshold 2 } thresholdRegOnt OBJECT-TYPE SYNTAX INTEGER (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "ont register number threshold, default 64." ::= { trapSetThreshold 3 } edfaThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF EdfaThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "edfa threshold table" ::= { trapSetThreshold 4 } edfaThresholdEntry OBJECT-TYPE SYNTAX EdfaThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of edfa threshold table" INDEX { tntitInputId } ::= { edfaThresholdTable 1 } EdfaThresholdEntry ::= SEQUENCE { edfaTrapIndex INTEGER, edfaTrapDescription OCTET STRING, edfaTrapEnableSwitch INTEGER, edfaThresholdLoLo OCTET STRING, edfaThresholdLo OCTET STRING, edfaThresholdHi OCTET STRING, edfaThresholdHiHi OCTET STRING } edfaTrapIndex OBJECT-TYPE SYNTAX INTEGER(1..11) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of edfa trap, see gponTrapExtraInfo in edfaTrap description." ::= { edfaThresholdEntry 1 } edfaTrapDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The description of edfa trap, see gponTrapExtraInfo in edfaTrap description." ::= { edfaThresholdEntry 2 } edfaTrapEnableSwitch OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "edfaTrapEnableSwitch: 0 disable 1 enable." ::= { edfaThresholdEntry 3 } edfaThresholdLoLo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "edfa threshold lolo." ::= { edfaThresholdEntry 4 } edfaThresholdLo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "edfa threshold lo." ::= { edfaThresholdEntry 5 } edfaThresholdHi OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "edfa threshold hi." ::= { edfaThresholdEntry 6 } edfaThresholdHiHi OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "edfa threshold hihi." ::= { edfaThresholdEntry 7 } ------ trapClearThreshold -------------------------------------- trapClearThreshold OBJECT IDENTIFIER ::= { statusTrap 8 } -------------------------------------------------------------- ------------------ 3. oemTrue ------------------------------ -------------------------------------------------------------- trueXmlOntConfig OBJECT IDENTIFIER ::= { oemTrue 1 } txocSlotId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "ont slot id. " ::= { trueXmlOntConfig 1 } txocPportId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "ont pport id. " ::= { trueXmlOntConfig 2 } txocOntId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "ont id. " ::= { trueXmlOntConfig 3 } txocServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "xml tftp server ip address." ::= { trueXmlOntConfig 4 } txocSn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "xml sn." ::= { trueXmlOntConfig 5 } txocCrc OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "xml crc. " ::= { trueXmlOntConfig 6 } trueNameToIndex OBJECT IDENTIFIER ::= { oemTrue 2 } -- 将模板名字转换成 index tntiName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "profile name." ::= { trueNameToIndex 1 } tntiType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "tntiType: 1 dba 2 vlan 3 us traffic 4 ds traffic 5 line 6 rule 7 unique." ::= { trueNameToIndex 2 } tntiStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "tntiStatus: 1 exist 2 not exist 3 full(& not exist)." ::= { trueNameToIndex 3 } tntiIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "1. if tntiStatus is 1(exist), tntiIndex is the index of tntiName. 2. if tntiStatus is 2(not exist), tntiIndex is the index of an empty entry. 3. if titiStatus is 3(full), tntiIndex is M_INVALID((ulong)-20)." ::= { trueNameToIndex 4 } -- true name to index table ---------------------------------- trueNameToIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF TrueNameToIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "true name to index table" ::= { oemTrue 3 } trueNameToIndexEntry OBJECT-TYPE SYNTAX TrueNameToIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of true name to index table" INDEX { tntitInputId } ::= { trueNameToIndexTable 1 } TrueNameToIndexEntry ::= SEQUENCE { tntitInputId INTEGER, tntitName OCTET STRING, tntitType INTEGER, tntitStatus INTEGER, tntitProfileId INTEGER } tntitInputId OBJECT-TYPE SYNTAX INTEGER(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of socket, should in <0-4294967295>." ::= { trueNameToIndexEntry 1 } tntitName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "profile name." ::= { trueNameToIndexEntry 2 } tntitType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "tntiType: 1 dba 2 vlan 3 us traffic 4 ds traffic 5 line 6 rule 7 unique." ::= { trueNameToIndexEntry 3 } tntitStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "tntiStatus: 1 exist 2 not exist 3 full(& not exist)." ::= { trueNameToIndexEntry 4 } tntitProfileId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "1. if tntiStatus is 1(exist), tntitProfileId is the index of tntiName. 2. if tntiStatus is 2(not exist), tntitProfileId is the index of an empty entry. 3. if titiStatus is 3(full), tntitProfileId is M_INVALID((ulong)-20)." ::= { trueNameToIndexEntry 5 } -------------------------------------------------------------- ------------------ 4. gponSwitch -------------------------- -------------------------------------------------------------- gponUdld OBJECT IDENTIFIER ::= { gponSwitch 1 } gponPower OBJECT IDENTIFIER ::= { gponSwitch 2 } gponFan OBJECT IDENTIFIER ::= { gponSwitch 3 } -- gpon udld if table ---------------------------------- gponUdldIfTable OBJECT-TYPE SYNTAX SEQUENCE OF GponUdldIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "gpon udld if table" ::= { gponUdld 1 } gponUdldIfEntry OBJECT-TYPE SYNTAX GponUdldIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of gpon udld if table" INDEX { guIfSlotIndex, guIfEportIndex } ::= { gponUdldIfTable 1 } GponUdldIfEntry ::= SEQUENCE { guIfSlotIndex INTEGER, guIfEportIndex INTEGER, guIfWorkmode INTEGER } guIfSlotIndex OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of slot, should in <0-5>." ::= { gponUdldIfEntry 1 } guIfEportIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of eth port, should in <1-16>." ::= { gponUdldIfEntry 2 } guIfWorkmode OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "guIfWorkmode: 0 normal 1 aggressive." ::= { gponUdldIfEntry 3 } guDelaydownTime OBJECT-TYPE SYNTAX INTEGER(1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "udld delaydown-time, default 1(s). " ::= { gponUdld 2 } -- gpon udld if table ---------------------------------- gponPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF GponPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "gpon power table" ::= { gponPower 1 } gponPowerEntry OBJECT-TYPE SYNTAX GponPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of gpon power table" INDEX { powerIndex } ::= { gponPowerTable 1 } GponPowerEntry ::= SEQUENCE { powerIndex INTEGER, powerInsertedStaus INTEGER, powerRunningStatus INTEGER } powerIndex OBJECT-TYPE SYNTAX INTEGER { power_0(0), power_1(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Power index." ::= { gponPowerEntry 1 } powerInsertedStaus OBJECT-TYPE SYNTAX INTEGER { empty(0), inserted(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Power inserted status." ::= { gponPowerEntry 2 } powerRunningStatus OBJECT-TYPE SYNTAX INTEGER { no_good(0), good(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Power running status." ::= { gponPowerEntry 3 } gponFanInsertStatus OBJECT-TYPE SYNTAX INTEGER { empty(0), insert(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Fan insert status. " ::= { gponFan 1 } gponFanTable OBJECT-TYPE SYNTAX SEQUENCE OF GponFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "gpon fan table" ::= { gponFan 2 } gponFanEntry OBJECT-TYPE SYNTAX GponFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of gpon fan table" INDEX { fanIndex } ::= { gponFanTable 1 } GponFanEntry ::= SEQUENCE { fanIndex INTEGER, fanSpeed INTEGER } fanIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Fan index." ::= { gponFanEntry 1 } fanSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Fan speed in rpm." ::= { gponFanEntry 2 } END