WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/fscom/FS-INTERFACE-MIB

3542 lines
120 KiB
Plaintext
Raw Permalink Blame History

-- *****************************************************************
-- FS-INTERFACE-MIB.mib: FS interface MIB file
--
-- March 2002, Wuzg
--
-- Copyright (c) 2002 by FS.COM Inc..
-- All rights reserved.
--
-- *****************************************************************
--
FS-INTERFACE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32,
OBJECT-TYPE,
Counter32,
Counter64,
Unsigned32,
IpAddress
FROM SNMPv2-SMI
RowStatus,
DisplayString,
PhysAddress,
DateAndTime,
MacAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ConfigStatus,
IfIndex
FROM FS-TC
EnabledStatus
FROM P-BRIDGE-MIB
ifIndex
FROM RFC1213-MIB
Gauge,
TimeTicks
FROM RFC1155-SMI
fsMgmt
FROM FS-SMI
IANAifType
FROM IANAifType-MIB
VlanId
FROM Q-BRIDGE-MIB
InterfaceIndex
FROM IF-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC3411
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB; -- RFC4001
fsInterfaceMIB MODULE-IDENTITY
LAST-UPDATED "201002010000Z"
ORGANIZATION "FS.COM Inc.."
CONTACT-INFO
"
Tel: 400-865-2852
E-mail: https://www.fs.com/live_chat_service_mail.html"
DESCRIPTION
"This module defines fs interface mibs."
REVISION "201002010000Z"
DESCRIPTION
"Add a table about vlan."
REVISION "200203200000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { fsMgmt 10}
fsIfConfigMIBObjects OBJECT IDENTIFIER ::= { fsInterfaceMIB 1 }
fsIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"list of interface basic configuration objects."
::= { fsIfConfigMIBObjects 1 }
fsIfEntry OBJECT-TYPE
SYNTAX FSIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains interface basic configurations."
INDEX { fsIfIndex }
::= { fsIfTable 1 }
FSIfEntry ::=
SEQUENCE {
fsIfIndex IfIndex,
fsIfPortType INTEGER,
fsIfFlowControlAdminStatus INTEGER,
fsIfFlowControlOperStatus EnabledStatus,
fsIfAdminSpeed INTEGER,
fsIfAdminDuplex INTEGER,
fsIfOperSpeed INTEGER,
fsIfOperDuplex INTEGER,
fsIfManageStatus EnabledStatus,
fsIfIpBroadcast IpAddress,
fsIfLayer INTEGER,
fsIfMode INTEGER,
fsIfCounterClear Integer32,
fsIfEntryStatus ConfigStatus,
fsIfMediumType INTEGER,
fsIfDownCounter Counter32,
fsIfInOctets Counter64,
fsIfOutOctets Counter64,
fsIfBcastInhibit INTEGER,
fsIfNegotiation INTEGER,
fsIfPhysAddress MacAddress,
fsIfAdminSpeedRW INTEGER,
fsIfAdminDuplexRW INTEGER,
fsIfModeRW INTEGER,
fsIfSpeed Gauge,
fsifAdminStatus INTEGER,
fsifOperStatus INTEGER,
fsIfInNUcastPkts Counter64,
fsIfOutNUcastPkts Counter64,
fsIfUpDownTimes Counter32,
fsifAdminStatusw INTEGER,
fsifOperStatusw INTEGER,
fsifSpeedw Integer32,
fsifMacAddress MacAddress,
fsifLastChange TimeTicks,
fsIfInPkts Counter64,
fsIfDiscard Counter64,
fsIfBandwidthUsage DisplayString,
fsIfInBitsRate Counter64,
fsIfInPktRate Counter64,
fsIfOutBitsRate Counter64,
fsIfOutPktRate Counter64,
fsIfInBandwidthUsage DisplayString,
fsIfOutBandwidthUsage DisplayString,
fsIfInErrorPktsRate DisplayString,
fsIfOutErrorPktsRate DisplayString,
fsIfInDropPktsRate DisplayString,
fsIfOutDropPktsRate DisplayString,
fsIfOutNoBuffer Counter64,
fsIfOutPkts Counter64
}
fsIfIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { fsIfEntry 1 }
fsIfPortType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
port10M100MBASETX(2),
port100MBASEFXL(3),
port100MBASEFXS(4),
port1000MBASESX(5),
port1000MBASELX(6),
port1000MBASETX(7),
portGBIC(8),
port100MBASEFX(9),
port1000MBASEFX(10),
portSFP(11),
port10GBASESR(12),
port10GBASELR(13),
port10GBASEER(14),
port10GBASELX4(15),
port10GBASESW(16),
port10GBASELW(17),
port10GBASEEW(18),
port10GBASE(19),
port40GBASEKR(20),
port40GBASECR(21),
port40GBASELR(22),
port40GBASESR(23),
port40GBASE(24),
port100GBASECR(25),
port100GBASESR(26),
port100GBASELR(27),
port100GBASEER(28),
port100GBASE(29),
port155MCPOS(50),
port622MCPOS(51),
port2G5CPOS(52),
port10GCPOS(53),
port155MPOS(54),
port622MPOS(55),
port2G5POS(56),
port10GPOS(57),
port155MATM(58),
port622MATM(59),
port2G5ATM(60),
port10GATM(61),
portE1ELC(62),
port20GBASE(63),
port25GBASE(64),
port2500MBASE(65),
port5000MBASE(66)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port type of this port, list as above.
port100MBASEFX indicates that port is port100MBASEFXL or port100MBASEFXS,
and system doesn't distinguish.
port1000MBASEFX indicates that port is port1000MBASEFLX or port1000MBASEFSX,
and system doesn't distinguish.
This attribute apply physical port"
::= { fsIfEntry 2 }
fsIfFlowControlAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
autonego(3),
unknown(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow control of a port management status.
This attribute apply physical port and aggreate port"
::= { fsIfEntry 3 }
fsIfFlowControlOperStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Oper status: after the negotiation between two ports connetted
the flow contrl status.
This attribute apply physical port and aggreate port"
::= { fsIfEntry 4 }
fsIfAdminSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mb(1),
speed100Mb(2),
speed1000Mb(3),
autonego(4),
speed10Gb(5),
unknown(6),
speed40Gb(7),
speed100Gb(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"port speed settings.
This attribute apply physical port and aggreate port"
::= { fsIfEntry 5 }
fsIfAdminDuplex OBJECT-TYPE
SYNTAX INTEGER {
full(1),
half(2),
autonego(3),
unknown(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"port duplex settings.
This attribute apply physical port and aggreate port"
::= { fsIfEntry 6 }
fsIfOperSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mb(1),
speed100Mb(2),
speed1000Mb(3),
unknown(4),
speed10Gb(5),
speed40Gb(6),
speed100Gb(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"After two port have negotiated the speed status,and this object
is the working speed status. while the port link status is down ,
then the speed status is unknown(4).
This attribute apply physical port and aggreate port"
::= { fsIfEntry 7 }
fsIfOperDuplex OBJECT-TYPE
SYNTAX INTEGER {
full(1),
half(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"After two port have negotiated the duplex status, and this object
is the working duplex status. while the port link status is down ,
then the speed status is unknown(3).
This attribute apply physical port and aggreate port"
::= { fsIfEntry 8 }
fsIfManageStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Management status of the interface."
DEFVAL { enabled }
::={fsIfEntry 9}
fsIfIpBroadcast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Broadcast address of the interface. if broadcast address not configured on interface, return 0.0.0.0"
::= { fsIfEntry 10 }
fsIfLayer OBJECT-TYPE
SYNTAX INTEGER {
layer-2(1), -- the interface is a interface of L2
layer-3(2) -- the interface is a interface of L3
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { fsIfEntry 11 }
fsIfMode OBJECT-TYPE
SYNTAX INTEGER {
access(1), -- the mode of interface is access port
trunk(2), -- the mode of interface is trunk port
dot1q-tunnel(3), -- the mode of interface is 802.1q tunnel port
hybrid(4), -- the mode of interface is hybrid port
other(5), -- other mode
uplink(6), -- the mode of interface is uplink port
host(7), -- the mode of interface is private-vlan host port
promiscuous(8) -- the mode of interface is private-vlan promiscuous port
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value is meaning for only physical port and aggreate port"
::= { fsIfEntry 12 }
fsIfCounterClear OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting its to any value but 0, will clear counters of this interface.
Setting its value to 0 will cause no action of the agent. and when
query will always return 0. "
::= { fsIfEntry 13 }
fsIfEntryStatus OBJECT-TYPE
SYNTAX ConfigStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this entry, set this object to valid will create a interface,
and set its value to invalid will delete the interface of this entry."
::= { fsIfEntry 14 }
fsIfMediumType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
copper(1),
fiber(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port medium type of this port,fiber or copper."
::= { fsIfEntry 15 }
fsIfDownCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counters of linkdown times of the interface."
::= { fsIfEntry 16 }
fsIfInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of ifCounterDiscontinuityTime."
::= { fsIfEntry 17 }
fsIfOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of ifCounterDiscontinuityTime."
::= { fsIfEntry 18 }
fsIfBcastInhibit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The percentage of the broadcast storm restraint on the
interface."
::= { fsIfEntry 19 }
fsIfNegotiation OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The negotiation status of the interface."
::= { fsIfEntry 20 }
fsIfPhysAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's address at its protocol sub-layer. For
example, for an 802.x interface, this object normally
contains a MAC address. The interface's media-specific MIB
must define the bit and byte ordering and the format of the
value of this object. For interfaces which do not have such
an address (e.g., a serial line), this object should contain
an octet string of zero length."
::= { fsIfEntry 21 }
fsIfAdminSpeedRW OBJECT-TYPE
SYNTAX INTEGER {
speed10Mb(1),
speed100Mb(2),
speed1000Mb(3),
autonego(4),
speed10Gb(5),
unknown(6),
speed40Gb(7),
speed100Gb(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port speed settings.
This attribute apply physical port and aggreate port"
::= { fsIfEntry 22 }
fsIfAdminDuplexRW OBJECT-TYPE
SYNTAX INTEGER {
full(1),
half(2),
autonego(3),
unknown(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port duplex settings.
This attribute apply physical port and aggreate port"
::= { fsIfEntry 23 }
fsIfModeRW OBJECT-TYPE
SYNTAX INTEGER {
access(1), -- the mode of interface is access port
trunk(2), -- the mode of interface is trunk port
dot1q-tunnel(3), -- the mode of interface is 802.1q tunnel port
hybrid(4), -- the mode of interface is hybrid port
other(5), -- other mode
uplink(6), -- the mode of interface is uplink port
host(7), -- the mode of interface is private-vlan host port
promiscuous(8) -- the mode of interface is private-vlan promiscuous port
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is meaning for only physical port and aggreate port"
::= { fsIfEntry 24 }
fsIfSpeed OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current bandwidth in units of
Mbits per second."
::= { fsIfEntry 25 }
fsifAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
adminup(1),
admindown(2),
admintest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the interface keeps the admin state ."
::= { fsIfEntry 26 }
fsifOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
test(3),
unknow(4),
dormant(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the interface keeps the oper state ."
::= { fsIfEntry 27}
fsIfInNUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of receiving packets contain BROADCAST and PACKET_MULTICAST ."
::= { fsIfEntry 28 }
fsIfOutNUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of sending packets contain BROADCAST and PACKET_MULTICAST ."
::= { fsIfEntry 29 }
fsIfUpDownTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counters of linkup and linkdown times of the interface."
::= { fsIfEntry 30 }
fsifAdminStatusw OBJECT-TYPE
SYNTAX INTEGER {
up(0),
admindown(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the interface. When a managed system initializes, all
interfaces start with ifAdminStatus in the admindown(1)
state. As a result of either explicit management
action or per configuration information retained by
the managed system, ifAdminStatus is then changed to
either the up(0) states (or remains in
the admindown(1) state)."
::= { fsIfEntry 31 }
fsifOperStatusw OBJECT-TYPE
SYNTAX INTEGER {
up(0),
down(1),
admindown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
If fsApIfAdminStatus is admindown(2) then
fsApIfOperStatus should be admindown(2). If fsApIfAdminStatus is
changed to up(0) then fsApIfOperStatus should change to
up(0) . it should remain in the down(1) state if
and only if there is a fault that prevents it from
going to the up(0) state; "
::= { fsIfEntry 32 }
fsifSpeedw OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current bandwidth in units of
Mbits per second."
::= { fsIfEntry 33 }
fsifMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's address at its protocol sub-layer.
For example, for an 802.x interface, this object
normally contains a MAC address. The interface's
media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do not have such an address
(e.g., a serial line), this object should contain an
octet string of zero length."
::= { fsIfEntry 34 }
fsifLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the time that comes current state ."
::= { fsIfEntry 35 }
fsIfInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received on this interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfEntry 36 }
fsIfDiscard OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bound packets which were chosen to be
discarded even though no errors. One possible reason for
discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfEntry 37 }
fsIfBandwidthUsage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current bandwidth utilization of interface."
::= { fsIfEntry 38 }
fsIfInBitsRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average input packet-rate over a period of time(configuration by interface command 'load-interval')
in bits per second on this interface."
::= { fsIfEntry 39 }
fsIfInPktRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average input packet-rate over a period of time(configuration by interface command 'load-interval')
in packets per second on this interface."
::= { fsIfEntry 40 }
fsIfOutBitsRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average output packet-rate over a period of time(configuration by interface command 'load-interval')
in bits per second on this interface."
::= { fsIfEntry 41 }
fsIfOutPktRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average output packet-rate over a period of time(configuration by interface command 'load-interval')
in packets per second on this interface."
::= { fsIfEntry 42 }
fsIfInBandwidthUsage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX bandwidth utilization ratio of interface."
::= { fsIfEntry 43 }
fsIfOutBandwidthUsage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX bandwidth utilization ratio of interface."
::= { fsIfEntry 44 }
fsIfInErrorPktsRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input packet error rate."
::= { fsIfEntry 45 }
fsIfOutErrorPktsRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output packet error rate."
::= { fsIfEntry 46 }
fsIfInDropPktsRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input packet discarded rate."
::= { fsIfEntry 47 }
fsIfOutDropPktsRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output packet discarded rate."
::= { fsIfEntry 48 }
fsIfOutNoBuffer OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ouyput drop packet rate on this interface due to resource lack."
::= { fsIfEntry 49 }
fsIfOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets sent on this interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfEntry 50 }
fsIfIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface ip configuration entries."
::= { fsIfConfigMIBObjects 2}
fsIfIpEntry OBJECT-TYPE
SYNTAX FSIfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing configuration information applicable
to a Layer3 interface."
INDEX { fsIfIpIfIndex, fsIfIpId, fsIfIp}
::= { fsIfIpTable 1 }
FSIfIpEntry ::=
SEQUENCE {
fsIfIpIfIndex IfIndex,
fsIfIpId INTEGER,
fsIfIp IpAddress,
fsIfIpMask IpAddress,
fsIfIpEntryStatus RowStatus
}
fsIfIpIfIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, for each Layer3 interface."
::= { fsIfIpEntry 1 }
fsIfIpId OBJECT-TYPE
SYNTAX INTEGER{
primary(1), -- primary ip address of Layer3 interface
secondary(2) -- secondary ip address of Layer3 interface
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of interface ip address."
::= { fsIfIpEntry 2 }
fsIfIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip address of the interface fsIfIndex refer to."
::= { fsIfIpEntry 3 }
fsIfIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ip mask of the interface ip address."
::= { fsIfIpEntry 4 }
fsIfIpEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"entry status of this entry. and the means in this enviraments can
reffer to the text-convention definition of the RowStatus."
::= { fsIfIpEntry 5 }
fsIfStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"list of interface status. Status information include some error state and
result of examining to the interface,etc."
::= { fsIfConfigMIBObjects 3 }
fsIfStatusEntry OBJECT-TYPE
SYNTAX FSIfStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains interface status information."
INDEX { fsIfStatusIndex }
::= { fsIfStatusTable 1 }
FSIfStatusEntry ::=
SEQUENCE {
fsIfStatusIndex IfIndex,
fsIfStatusLoopBackExamine Integer32,
fsIfErrorStatus INTEGER,
fsIfLineDetect Integer32
}
fsIfStatusIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { fsIfStatusEntry 1 }
fsIfStatusLoopBackExamine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting its to any value but 0, will Checking whether this port or aggreate can
receive and send packets normally, It indicates that port or aggreate is normal
if opertion is success.
Setting its value to 0 will cause no action of the agent. and when
query will always return 0.
This attribute apply physical port and aggreate port"
::= { fsIfStatusEntry 2 }
fsIfErrorStatus OBJECT-TYPE
SYNTAX INTEGER {
no-error(1), -- port is enabled normal
err-disable-bpduguard(2), -- port is disabled by port receive BPDU packet when port
-- enable BPDU guard
err-disable-ptsecurity(3) -- port is disabled by port security is violatd
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port's error status information"
::= { fsIfStatusEntry 3 }
fsIfLineDetect OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When reading this object, system detects the quality of line connecting the port.
Detect whether the line is broken or short circuit or not.
The meaning of the obtained value:
Return value=N*10000000+M
N stands for the line state (0: perfect; 1: break; 2: short circuit)
M stands for the location of the break or short circuit in the line(distance from the switch port, in metre)
If the line is perfect, the value is zero."
::= { fsIfStatusEntry 4 }
fsGlobalIfDisableRecovery OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting its to any value but 0, the interfaces which is shutted down by
some error happened will recovery from disabled status .
Setting its value to 0 will cause no action of the agent. and when
query will always return 0.
This attribute apply physical port and aggreate port"
::= { fsIfConfigMIBObjects 4 }
--
-- portType Choose
--
fsPortTypeChooseTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSPortTypeChooseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of entrance to choose port type."
::= { fsIfConfigMIBObjects 5 }
fsPortTypeChooseEntry OBJECT-TYPE
SYNTAX FSPortTypeChooseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entrance to choose port type."
INDEX { fsPortTypeChooseIndex }
::= { fsPortTypeChooseTable 1 }
FSPortTypeChooseEntry ::=
SEQUENCE {
fsPortTypeChooseIndex IfIndex,
fsPortTypeChooseType INTEGER
}
fsPortTypeChooseIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logic port number."
::= { fsPortTypeChooseEntry 1 }
fsPortTypeChooseType OBJECT-TYPE
SYNTAX INTEGER {
fiber(1), --priority of fiber port
copper(2) --priority of copper port
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The chosen port type. This object is used to choose one of the multiple physical ports of different types,
when the same logical port is correspondent with them.
Apply this attribute to the physical port only."
::= { fsPortTypeChooseEntry 2 }
--
-- mtu
--
fsIfMTUTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfMTUEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Access table of MTU on interface."
::= { fsIfConfigMIBObjects 6 }
fsIfMTUEntry OBJECT-TYPE
SYNTAX FSIfMTUEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interfac MTU access."
INDEX { fsIfMTUIndex }
::= { fsIfMTUTable 1 }
FSIfMTUEntry ::=
SEQUENCE {
fsIfMTUIndex IfIndex,
fsIfMTU Integer32
}
fsIfMTUIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface number"
::= { fsIfMTUEntry 1 }
fsIfMTU OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface MTU."
::= { fsIfMTUEntry 2 }
--
-- Available Bandwidth
--
fsIfAvailableBWTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfAvailableBWEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Access table of Available Bandwidth on interface."
::= { fsIfConfigMIBObjects 7 }
fsIfAvailableBWEntry OBJECT-TYPE
SYNTAX FSIfAvailableBWEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interfac available bandwidth access."
INDEX { fsIfAvailableBWIfIndex }
::= { fsIfAvailableBWTable 1 }
FSIfAvailableBWEntry ::=
SEQUENCE {
fsIfAvailableBWIfIndex IfIndex,
fsIfAvailableBWIfBW Gauge
}
fsIfAvailableBWIfIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface number"
::= { fsIfAvailableBWEntry 1 }
fsIfAvailableBWIfBW OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface available bandwidth(bit)."
::= { fsIfAvailableBWEntry 2 }
--
-- Creat Interface Vlan
--
fsIfSVICreatTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfSVICreatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Access table of Available Bandwidth on interface."
::= { fsIfConfigMIBObjects 8 }
fsIfSVICreatEntry OBJECT-TYPE
SYNTAX FSIfSVICreatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interfac available bandwidth access."
INDEX { fsIfSVICreatVlanNum }
::= { fsIfSVICreatTable 1 }
FSIfSVICreatEntry ::=
SEQUENCE {
fsIfSVICreatVlanNum Integer32,
fsIfHandleSVI INTEGER
}
fsIfSVICreatVlanNum OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Vlan number"
::= { fsIfSVICreatEntry 1 }
fsIfHandleSVI OBJECT-TYPE
SYNTAX INTEGER{create(0), delete(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0 creat,1 delete."
::= { fsIfSVICreatEntry 2 }
--
-- Get Physical Interface Number
--
fsIfPhyIntNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of physical interfaces (regardless of their
current state) present on this system."
::= { fsIfConfigMIBObjects 9 }
--
-- Get Interface LinkUP Times
--
fsIfLinkUPTimesTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfLinkUPTimesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Access table of Available Bandwidth on interface."
::= { fsIfConfigMIBObjects 10 }
fsIfLinkUPTimesEntry OBJECT-TYPE
SYNTAX FSIfLinkUPTimesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interfac available bandwidth access."
INDEX { fsInterfaceIndex }
::= { fsIfLinkUPTimesTable 1 }
FSIfLinkUPTimesEntry ::=
SEQUENCE {
fsInterfaceIndex Integer32,
fsIfLinkUPTimes INTEGER
}
fsInterfaceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Index"
::= { fsIfLinkUPTimesEntry 1 }
fsIfLinkUPTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlaues Of Linkup Times."
::= { fsIfLinkUPTimesEntry 2 }
--
-- Interface encapsulation dot1q VLAN
--
fsIfEncapsulationTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfEncapsulationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Access table of Encapsulation dot1q VLAN on interface."
::= { fsIfConfigMIBObjects 11 }
fsIfEncapsulationEntry OBJECT-TYPE
SYNTAX FSIfEncapsulationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interfac encapsulation dot1q VLAN access."
INDEX { fsIfEncapsulationIndex }
::= { fsIfEncapsulationTable 1 }
FSIfEncapsulationEntry ::=
SEQUENCE {
fsIfEncapsulationIndex IfIndex,
fsIfEncapsulationVlan VlanId
}
fsIfEncapsulationIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each interface. Its value
ranges between 1 and the value of ifNumber. The
value for each interface must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization."
::= { fsIfEncapsulationEntry 1 }
fsIfEncapsulationVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value indicate the VID of the dot1q vlan encapsulation.
The value 0 means de-encapsulation."
::= { fsIfEncapsulationEntry 2 }
--
-- Get ap interface number
--
fsApIfNumberTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSApIfNumberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Access table of ap interface number."
::= { fsIfConfigMIBObjects 12 }
fsApIfNumberEntry OBJECT-TYPE
SYNTAX FSApIfNumberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interfac number of ap."
INDEX { fsApPhyAddress }
::= { fsApIfNumberTable 1 }
FSApIfNumberEntry ::=
SEQUENCE {
fsApPhyAddress PhysAddress,
fsApIfNumber INTEGER,
fsApIfPhyIntNum INTEGER
}
fsApPhyAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap's address at its protocol sub-layer.
The ap's media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do not have such an address
(e.g., a serial line), this object should contain an
octet string of zero length."
::= { fsApIfNumberEntry 1 }
fsApIfNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlaues Of interface number."
::= { fsApIfNumberEntry 2 }
fsApIfPhyIntNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlaues Of physical interface number."
::= { fsApIfNumberEntry 3 }
--
--fsApIfTable
--
fsApIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSApIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of fsAp interface entries. The number of entries
is given by the value of fsApIfNumber."
::= { fsIfConfigMIBObjects 13 }
fsApIfEntry OBJECT-TYPE
SYNTAX FSApIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information fsApplicable
to a particular interface."
INDEX {
fsApPhysAddress,
fsApIfIndex
}
::= { fsApIfTable 1 }
FSApIfEntry ::= SEQUENCE {
fsApPhysAddress PhysAddress,
fsApIfIndex IfIndex,
fsApIfDescr DisplayString,
fsApIfType IANAifType,
fsApIfMtu INTEGER,
fsApIfSpeed Gauge,
fsApIfPhysAddress PhysAddress,
fsApIfAdminStatus INTEGER,
fsApIfOperStatus INTEGER,
fsApIfLastChange TimeTicks,
fsApIfInOctets Counter64,
fsApIfInUcastPkts Counter64,
fsApIfInNUcastPkts Counter64,
fsApIfInDiscards Counter32,
fsApIfInErrors Counter32,
fsApIfInUnknownProtos Counter32,
fsApIfOutOctets Counter64,
fsApIfOutUcastPkts Counter64,
fsApIfOutNUcastPkts Counter64,
fsApIfOutDiscards Counter32,
fsApIfOutErrors Counter32,
fsApIfOutQLen Gauge,
fsApIfLinkUPTimes INTEGER,
fsApIfInDataOctets Counter64,
fsApIfOutDataOctets Counter64,
fsApIfMgmtUploadOctets Counter32,
fsApIfMgmtDownloadOctets Counter32,
fsApIfSpeedw Integer32,
fsApIfMtuw Integer32,
fsApIfPhysAddressw MacAddress,
fsApIfInUcastPktsw Counter32,
fsApIfInNUcastPktsw Counter32,
fsApIfOutUcastPktsw Counter32,
fsApIfOutNUcastPktsw Counter32,
fsApIfLinkUPTimesw Counter32,
fsApIfInPkts Counter64,
fsApIfInFlow Counter32,
fsApIfOutFlow Counter32,
fsApIfInBrdcastPkts Counter64,
fsApIfOutBrdcastPkts Counter64,
fsApIfInMulcastPkts Counter64,
fsApIfOutMulcastPkts Counter64,
fsApIfInPayloadOctets Counter64,
fsApIfOutPayloadOctets Counter64,
fsApIfAlias DisplayString,
fsApIfInDateRate Counter64,
fsApIfOutDateRate Counter64,
fsApifInNormalPkts Counter64,
fsApIfOutPkts Counter64
}
fsApPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap's address at its protocol sub-layer.
The ap's media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do not have such an address
(e.g., a serial line), this object should contain an
octet string of zero length."
::= { fsApIfEntry 1 }
fsApIfIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initialization of the entity's network
management system to the next re-initialization."
::= { fsApIfEntry 2 }
fsApIfDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing information about the
interface. This string should include the name of the
manufacturer, the product name and the version of the
interface hardware/software."
::= { fsApIfEntry 3 }
fsApIfType OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of interface. Additional values for ifType
are assigned by the Internet Assigned Numbers
Authority (IANA), through updating the syntax of the
IANAifType textual convention."
::= { fsApIfEntry 4 }
fsApIfMtu OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size of the largest network
datagram that can be sent on the interface."
::= { fsApIfEntry 5 }
fsApIfSpeed OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current bandwidth in units of
Mbits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth.For a sub-layer which
has no concept of bandwidth, this object should be
zero."
::= { fsApIfEntry 6 }
fsApIfPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's address at its protocol sub-layer.
For example, for an 802.x interface, this object
normally contains a MAC address. The interface's
media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do not have such an address
(e.g., a serial line), this object should contain an
octet string of zero length."
::= { fsApIfEntry 7 }
fsApIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
admindown(2),
testing(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed. When a managed system initializes, all
interfaces start with ifAdminStatus in the admindown(2)
state. As a result of either explicit management
action or per configuration information retained by
the managed system, ifAdminStatus is then changed to
either the up(1) or testing(3) states (or remains in
the admindown(2) state)."
::= { fsApIfEntry 8 }
fsApIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
admindown(3),
unknown(4),
dormant(5),
notPresent(6),
lowerLayerDown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
If fsApIfAdminStatus is admindown(2) then
fsApIfOperStatus should be admindown(3). If fsApIfAdminStatus is
changed to up(1) then fsApIfOperStatus should change to
up(1) if the interface is ready to transmit and
receive network traffic; it should change to
dormant(5) if the interface is waiting for external
actions (such as a serial line waiting for an incoming
connection); it should remain in the down(2) state if
and only if there is a fault that prevents it from
going to the up(1) state; it should remain in the
notPresent(6) state if the interface has missing
(typically, hardware) components."
::= { fsApIfEntry 9 }
fsApIfLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the interface
entered its current operational state. If the current
state was entered prior to the last re-initialization
of the local network management subsystem, then this
object contains a zero value."
::= { fsApIfEntry 10 }
fsApIfInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 11 }
fsApIfInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 12 }
fsApIfInNUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast or broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of
fsApIfInMulticastPkts and fsApIfInBroadcastPkts."
::= { fsApIfEntry 13 }
fsApIfInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen to be
discarded even though no errors had been detected to
prevent their being deliverable to a higher-layer
protocol. One possible reason for discarding such a
packet could be to free up buffer space.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 14 }
fsApIfInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained
errors preventing them from being deliverable to a
higher-layer protocol.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 15 }
fsApIfInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of packets
received via the interface which were discarded
because of an unknown or unsupported protocol. For
character-oriented or fixed-length interfaces that
support protocol multiplexing the number of
transmission units received via the interface which
were discarded because of an unknown or unsupported
protocol. For any interface that does not support
protocol multiplexing, this counter will always be 0.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 16 }
fsApIfOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 17 }
fsApIfOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not
sent.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 18 }
fsApIfOutNUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not
sent.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of
ifOutMulticastPkts and fsApIfOutBroadcastPkts."
::= { fsApIfEntry 19 }
fsApIfOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets which were chosen to
be discarded even though no errors had been detected
to prevent their being transmitted. One possible
reason for discarding such a packet could be to free
up buffer space.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 20 }
fsApIfOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of
outbound packets that could not be transmitted because
of errors. For character-oriented or fixed-length
interfaces, the number of outbound transmission units
that could not be transmitted because of errors.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 21 }
fsApIfOutQLen OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The length of the output packet queue (in packets)."
::= { fsApIfEntry 22 }
fsApIfLinkUPTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlaues Of Linkup Times."
::= { fsApIfEntry 23 }
fsApIfInDataOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 24 }
fsApIfOutDataOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 25 }
fsApIfMgmtUploadOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upload octets received on the mgmt interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 26 }
fsApIfMgmtDownloadOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The download octets transmitted out of the
mgmt interface, including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 27 }
fsApIfSpeedw OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current bandwidth in units of
Mbits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth. For a sub-layer which
has no concept of bandwidth, this object should be
zero."
::= { fsApIfEntry 28 }
fsApIfMtuw OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size of the largest network
datagram that can be sent on the interface."
::= { fsApIfEntry 29 }
fsApIfPhysAddressw OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's address at its protocol sub-layer.
For example, for an 802.x interface, this object
normally contains a MAC address. The interface's
media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do not have such an address
(e.g., a serial line), this object should contain an
octet string of zero length."
::= { fsApIfEntry 30 }
fsApIfInUcastPktsw OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 31 }
fsApIfInNUcastPktsw OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast or broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of
fsApIfInMulticastPkts and fsApIfInBroadcastPkts."
::= { fsApIfEntry 32 }
fsApIfOutUcastPktsw OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not
sent.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 33 }
fsApIfOutNUcastPktsw OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not
sent.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of
ifOutMulticastPkts and fsApIfOutBroadcastPkts."
::= { fsApIfEntry 34 }
fsApIfLinkUPTimesw OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counters of linkup and linkdown times of the interface."
::= { fsApIfEntry 35 }
fsApIfInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 36 }
fsApIfInFlow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flow rate of data octets in units of Bytes per-second received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 37 }
fsApIfOutFlow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flow rate of data octets in units of Bytes per-second transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 38 }
fsApIfInBrdcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of broadcast packets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 39 }
fsApIfOutBrdcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of broadcast packets transmitted out of the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 40 }
fsApIfInMulcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast packets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 41 }
fsApIfOutMulcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast packets transmitted out of the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 42 }
fsApIfInPayloadOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of payload octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 43 }
fsApIfOutPayloadOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of payload octets transmitted out of the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 44 }
fsApIfAlias OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing alias information about the
interface."
::= { fsApIfEntry 45 }
fsApIfInDateRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flow rate of data octets in units of Kilo-Bits per-second received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 46 }
fsApIfOutDateRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flow rate of data octets in units of Kilo-Bits per-second transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 47 }
fsApifInNormalPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of normal packets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 48 }
fsApIfOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets transmitted out of the interface,
including framing characters.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsApIfEntry 49 }
fsIfLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface entries. The number of entries is
given by the value of ifNumber."
::= { fsIfConfigMIBObjects 14 }
fsIfLinkEntry OBJECT-TYPE
SYNTAX FSIfLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable to a
particular interface."
INDEX { fsIfLinkIndex }
::= { fsIfLinkTable 1 }
FSIfLinkEntry ::=
SEQUENCE {
fsIfLinkIndex IfIndex,
fsIfUplinkInOctets Counter32,
fsIfUplinkInUcastPkts Counter32,
fsIfUplinkInNUcastPkts Counter32,
fsIfUplinkInDiscards Counter32,
fsIfUplinkInErrors Counter32,
fsIfUplinkOutOctets Counter32,
fsIfUplinkOutUcastPkts Counter32,
fsIfUplinkOutNUcastPkts Counter32,
fsIfUplinkOutDiscards Counter32,
fsIfUplinkOutErrors Counter32,
fsIfDownlinkInOctets Counter32,
fsIfDownlinkInUcastPkts Counter32,
fsIfDownlinkInNUcastPkts Counter32,
fsIfDownlinkInDiscards Counter32,
fsIfDownlinkInErrors Counter32,
fsIfDownlinkOutOctets Counter32,
fsIfDownlinkOutUcastPkts Counter32,
fsIfDownlinkOutNUcastPkts Counter32,
fsIfDownlinkOutDiscards Counter32,
fsIfDownlinkOutErrors Counter32,
fsIfUplinkInBcastPkts Counter64,
fsIfUplinkOutBcastPkts Counter64,
fsIfDownlinkInBcastPkts Counter64,
fsIfDownlinkOutBcastPkts Counter64
}
fsIfLinkIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization."
::= { fsIfLinkEntry 1 }
fsIfUplinkInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 2 }
fsIfUplinkInUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 3 }
fsIfUplinkInNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast or
broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of ifInMulticastPkts and
ifInBroadcastPkts."
::= { fsIfLinkEntry 4 }
fsIfUplinkInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 5 }
fsIfUplinkInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol. For character-
oriented or fixed-length interfaces, the number of inbound
transmission units that contained errors preventing them
from being deliverable to a higher-layer protocol.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 6 }
fsIfUplinkOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 7 }
fsIfUplinkOutUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 8 }
fsIfUplinkOutNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of ifOutMulticastPkts
and ifOutBroadcastPkts."
::= { fsIfLinkEntry 9 }
fsIfUplinkOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 10 }
fsIfUplinkOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 11 }
fsIfDownlinkInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 12 }
fsIfDownlinkInUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 13 }
fsIfDownlinkInNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast or
broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of ifInMulticastPkts and
ifInBroadcastPkts."
::= { fsIfLinkEntry 14 }
fsIfDownlinkInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 15 }
fsIfDownlinkInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol. For character-
oriented or fixed-length interfaces, the number of inbound
transmission units that contained errors preventing them
from being deliverable to a higher-layer protocol.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 16 }
fsIfDownlinkOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 17 }
fsIfDownlinkOutUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 18 }
fsIfDownlinkOutNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of ifOutMulticastPkts
and ifOutBroadcastPkts."
::= { fsIfLinkEntry 19 }
fsIfDownlinkOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 20 }
fsIfDownlinkOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 21 }
fsIfUplinkInBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of upbound and inbound packets, delivered by this
sub-layer to a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 22 }
fsIfUplinkOutBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of upbound and outbound packets, delivered by this
sub-layer to a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 23 }
fsIfDownlinkInBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of downbound and inbound packets, delivered by this
sub-layer to a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 24 }
fsIfDownlinkOutBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of downbound and outbound packets, delivered by this
sub-layer to a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { fsIfLinkEntry 25 }
-- interface traffic statistics, added by Yin Xiaojie, March 2013
fsIfTrafficStatisticsObjects OBJECT IDENTIFIER ::= { fsIfConfigMIBObjects 15 }
fsIfLinkTrafficStatistics OBJECT IDENTIFIER ::= { fsIfTrafficStatisticsObjects 1 }
fsIfLinkQosStatistics OBJECT IDENTIFIER ::= { fsIfTrafficStatisticsObjects 2 }
fsIfDeviceTrafficStatistics OBJECT IDENTIFIER ::= { fsIfTrafficStatisticsObjects 3 }
-- physical interface configuration table
fsIfPhyTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"list of physical interface basic configuration objects."
::= { fsIfConfigMIBObjects 16 }
fsIfPhyEntry OBJECT-TYPE
SYNTAX FSIfPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains physical interface basic configurations."
INDEX { fsIfPhyIndex }
::= { fsIfPhyTable 1 }
FSIfPhyEntry ::=
SEQUENCE {
fsIfPhyIndex IfIndex,
fsifPhyOperStatus INTEGER
}
fsIfPhyIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Physical port index."
::= { fsIfPhyEntry 1 }
fsifPhyOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(0),
down(1),
admindown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the physical interface."
::= { fsIfPhyEntry 2 }
-- interface peak rate information table
fsIfPeakRateTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfPeakRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"list of interface peak rate information objects."
::= { fsIfConfigMIBObjects 17 }
fsIfPeakRateEntry OBJECT-TYPE
SYNTAX FSIfPeakRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains interface peak rate information."
INDEX { fsIfPeakRateIndex }
::= { fsIfPeakRateTable 1 }
FSIfPeakRateEntry ::=
SEQUENCE {
fsIfPeakRateIndex IfIndex,
fsIfRxPeakRate Counter64,
fsIfRxPeakRateTime DisplayString,
fsIfTxPeakRate Counter64,
fsIfTxPeakRateTime DisplayString
}
fsIfPeakRateIndex OBJECT-TYPE
SYNTAX IfIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interface index."
::= { fsIfPeakRateEntry 1 }
fsIfRxPeakRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmission peak rate of interface."
::= { fsIfPeakRateEntry 2 }
fsIfRxPeakRateTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The occuring time of transmission peak rate of interface."
::= { fsIfPeakRateEntry 3 }
fsIfTxPeakRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receiving peak rate of interface."
::= { fsIfPeakRateEntry 4 }
fsIfTxPeakRateTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The occuring time of receiving peak rate of interface."
::= { fsIfPeakRateEntry 5 }
-- AP info table
fsApInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSApInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"list of ap information objects."
::= { fsIfConfigMIBObjects 18 }
fsApInfoEntry OBJECT-TYPE
SYNTAX FSApInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains ap information."
INDEX { fsApInfoAddress }
::= { fsApInfoTable 1 }
FSApInfoEntry ::=
SEQUENCE {
fsApInfoAddress PhysAddress,
fsApInfoWireInRate Counter64,
fsApInfoWireOutRate Counter64,
fsApInfoWireInOctets Counter64,
fsApInfoWireOutOctets Counter64
}
fsApInfoAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap's address at its protocol sub-layer.
The ap's media-specific MIB must define the bit and byte
ordering and the format of the value of this object.
For interfaces which do not have such an address
(e.g., a serial line), this object should contain an
octet string of zero length."
::= { fsApInfoEntry 1 }
fsApInfoWireInRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The input rate in bps of all ap wire-ports."
::= { fsApInfoEntry 2 }
fsApInfoWireOutRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The output rate in bps of all ap wire-ports."
::= { fsApInfoEntry 3 }
fsApInfoWireInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the ap wire-ports."
::= { fsApInfoEntry 4 }
fsApInfoWireOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the ap wire-ports."
::= { fsApInfoEntry 5 }
-- units of fsIfDropTable
fsIfDropTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface drop statistics."
::= { fsIfConfigMIBObjects 19 }
fsIfDropEntry OBJECT-TYPE
SYNTAX FSIfDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface statistics drop entry"
INDEX { fsIfDropIndex }
::= { fsIfDropTable 1 }
FSIfDropEntry ::=
SEQUENCE {
fsIfDropIndex Unsigned32,
fsIfInDropPkts Counter64,
fsIfInResLackPkts Counter64,
fsIfInQosDropPkts Counter64,
fsIfFwdEntryDropPkts Counter64,
fsIfOutDropPkts Counter64,
fsIfOutResLackPkts Counter64,
fsIfNoBufferConut Counter64,
fsIfOBMDropPkts Counter64
}
fsIfDropIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The device traffic drop interface index."
::= { fsIfDropEntry 1 }
fsIfInDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Input discarded packets without drop by QOS."
::= { fsIfDropEntry 2 }
fsIfInResLackPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Input discarded packets by resources lack."
::= { fsIfDropEntry 3 }
fsIfInQosDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Discarded packets by QOS."
::= { fsIfDropEntry 4 }
fsIfFwdEntryDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Input discarded packets by forwardind entry."
::= { fsIfDropEntry 5 }
fsIfOutDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Output discarded packets."
::= { fsIfDropEntry 6 }
fsIfOutResLackPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Output discarded packets by resources lack."
::= { fsIfDropEntry 7 }
fsIfNoBufferConut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "discarded packets by no buffer."
::= { fsIfDropEntry 8 }
fsIfOBMDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OBM discarded packets."
::= { fsIfDropEntry 9 }
-- units of LinkTrafficStatistics
fsIfLinkTrafficTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfLinkTrafficEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of link traffic statistics, including interface rate and bandwidth utilization."
::= { fsIfLinkTrafficStatistics 1 }
fsIfLinkTrafficEntry OBJECT-TYPE
SYNTAX FSIfLinkTrafficEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The link traffic statistics entry."
INDEX { fsIfLinkTrafficIndex }
::= { fsIfLinkTrafficTable 1 }
FSIfLinkTrafficEntry ::=
SEQUENCE {
fsIfLinkTrafficIndex Unsigned32,
fsIfLinkAvgRate Counter32,
fsIfLinkPeakRate Counter32,
fsIfLinkAvgBWUtilization INTEGER,
fsIfLinkPeakBWUtilization INTEGER
}
fsIfLinkTrafficIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The link traffic interface index."
::= { fsIfLinkTrafficEntry 1 }
fsIfLinkAvgRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's average bandwidth in units of bits per second."
DEFVAL { 0 }
::= { fsIfLinkTrafficEntry 2 }
fsIfLinkPeakRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current peak bandwidth in units of bits per second."
DEFVAL { 0 }
::= { fsIfLinkTrafficEntry 3 }
fsIfLinkAvgBWUtilization OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's average bandwidth Utilization."
DEFVAL { 0 }
::= { fsIfLinkTrafficEntry 4 }
fsIfLinkPeakBWUtilization OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current peak bandwidth Utilization."
DEFVAL { 0 }
::= { fsIfLinkTrafficEntry 5 }
-- units of LinkQosStatistics
fsLinkQosCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSLinkQosCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The results of these operations are stored in the fsLinkQosResultsTable"
::= { fsIfLinkQosStatistics 1 }
fsLinkQosCtlEntry OBJECT-TYPE
SYNTAX FSLinkQosCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the fsLinkQosCtlTable. The first index
element, fsLinkQosCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 3415, VACM)
and that allows a management application to identify its
entries. The second index, fsLinkQosCtlTestName (also an
SnmpAdminString), enables the same management
application to have multiple outstanding requests."
INDEX {
fsLinkQosCtlOwnerIndex,
fsLinkQosCtlTestName
}
::= { fsLinkQosCtlTable 1 }
FSLinkQosCtlEntry ::=
SEQUENCE {
fsLinkQosCtlOwnerIndex SnmpAdminString,
fsLinkQosCtlTestName SnmpAdminString,
fsLinkQosCtlTargetAddressType InetAddressType,
fsLinkQosCtlTargetAddress InetAddress,
fsLinkQosCtlAdminStatus INTEGER,
fsLinkQosCtlRowStatus RowStatus
}
fsLinkQosCtlOwnerIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need to create or
modify entries independently, the initial index is used
as an 'owner index'. Such an initial index has a syntax
of SnmpAdminString and can thus be trivially mapped to a
securityName or groupName defined in VACM, in
accordance with a security policy."
::= { fsLinkQosCtlEntry 1 }
fsLinkQosCtlTestName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the ping-based test. This is locally unique,
within the scope of a fsLinkQosCtlOwnerIndex."
::= { fsLinkQosCtlEntry 2 }
fsLinkQosCtlTargetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of host address to be used at a remote
host for performing a ping-based operation."
DEFVAL { unknown }
::= { fsLinkQosCtlEntry 3 }
fsLinkQosCtlTargetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the host address to be used at a remote host for
performing a ping-based operation. The host address type is
determined by the value of the corresponding
fsLinkQosCtlTargetAddressType."
DEFVAL { ''H }
::= { fsLinkQosCtlEntry 4 }
fsLinkQosCtlAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1), -- test should be started
disabled(2) -- test should be stopped
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reflects the desired state that a fsLinkQosCtlEntry should be
in:
enabled(1) - Attempt to activate the test as defined by
this fsLinkQosCtlEntry.
disabled(2) - Deactivate the test as defined by this
fsLinkQosCtlEntry.
Refer to the corresponding fsLinkQosResultsOperStatus to
determine the operational state of the test defined by
this entry."
DEFVAL { disabled }
::= { fsLinkQosCtlEntry 5 }
fsLinkQosCtlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
REFERENCE
"See definition of RowStatus in RFC 2579, 'Textual
Conventions for SMIv2.'"
::= { fsLinkQosCtlEntry 6 }
-- Results Table
fsLinkQosResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSLinkQosResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The results of these operations are stored in the fsLinkQosResultsTable."
::= { fsIfLinkQosStatistics 2 }
fsLinkQosResultsEntry OBJECT-TYPE
SYNTAX FSLinkQosResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the fsLinkQosResultsTable. The
fsLinkQosResultsTable has the same indexing as the
fsLinkQosCtlTable so that a fsLinkQosResultsEntry
corresponds to the fsLinkQosCtlEntry that caused it to
be created."
INDEX {
fsLinkQosCtlOwnerIndex,
fsLinkQosCtlTestName
}
::= { fsLinkQosResultsTable 1 }
FSLinkQosResultsEntry ::=
SEQUENCE {
fsLinkQosResultsOperStatus INTEGER,
fsLinkQosResultsIpTargetAddressType InetAddressType,
fsLinkQosResultsIpTargetAddress InetAddress,
fsLinkQosResultsMaxRtt Unsigned32,
fsLinkQosResultsMinRtt Unsigned32,
fsLinkQosResultsAverageRtt Unsigned32,
fsLinkQosResultsDelayJitter Unsigned32,
fsLinkQosResultsPktsLossRate Unsigned32,
fsLinkQosResultsNetworkAF Unsigned32
}
fsLinkQosResultsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1), -- test is in progress
disabled(2), -- test has stopped
completed(3) -- test is completed
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reflects the operational state of a fsLinkQosCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped.
completed(3) - Test is completed."
::= { fsLinkQosResultsEntry 1 }
fsLinkQosResultsIpTargetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of address stored in the
corresponding fsLinkQosResultsIpTargetAddress object."
DEFVAL { unknown }
::= { fsLinkQosResultsEntry 2 }
fsLinkQosResultsIpTargetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reports the IP address associated with a
fsLinkQosCtlTargetAddress value when the destination
address is specified as a DNS name. The value of this
object should be a zero-length octet string when a DNS
name is not specified or when a specified DNS name fails
to resolve.
The address type (InetAddressType) that relates to
this object is specified by the corresponding value
of fsLinkQosResultsIpTargetAddressType."
DEFVAL { ''H }
::= { fsLinkQosResultsEntry 3 }
fsLinkQosResultsMaxRtt OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum packet round-trip-time (RTT) that received. A value
of 0 for this object implies that no RTT has been received."
::= { fsLinkQosResultsEntry 4 }
fsLinkQosResultsMinRtt OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum packet round-trip-time (RTT) that received. A value
of 0 for this object implies that no RTT has been received."
::= { fsLinkQosResultsEntry 5 }
fsLinkQosResultsAverageRtt OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current average packet round-trip-time (RTT)."
::= { fsLinkQosResultsEntry 6 }
fsLinkQosResultsDelayJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all ping
responses received. Its purpose is to enable standard
deviation calculation. The estimate value of the delay jitter."
::= { fsLinkQosResultsEntry 7 }
fsLinkQosResultsPktsLossRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packets loss rate of the link."
::= { fsLinkQosResultsEntry 8 }
fsLinkQosResultsNetworkAF OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network availability factor."
::= { fsLinkQosResultsEntry 9 }
-- units of DeviceTrafficStatistics
fsIfDeviceTrafficTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSIfDeviceTrafficEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of device traffic statistics."
::= { fsIfDeviceTrafficStatistics 1 }
fsIfDeviceTrafficEntry OBJECT-TYPE
SYNTAX FSIfDeviceTrafficEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Device traffic statistics entry"
INDEX { fsIfDeviceTrafficIndex }
::= { fsIfDeviceTrafficTable 1 }
FSIfDeviceTrafficEntry ::=
SEQUENCE {
fsIfDeviceTrafficIndex Unsigned32,
fsIfFC INTEGER,
fsIfFCTransRate Counter32,
fsIfFCTransPktsNum Counter64,
fsIfFCDiscardRate Counter32,
fsIfFCDiscardPktsNum Counter64,
fsIfFCPktsLossRate INTEGER,
fsIfFCBandwidthRate Counter32,
fsIfFCBandwidthPercentage INTEGER,
fsIfDeviceFCGathers INTEGER,
fsIfFullMeshFCGathers INTEGER,
fsIfClassBasedGathers INTEGER,
fsIfNodeBasedGathers INTEGER,
fsIfNodeClassBasedGathers INTEGER,
fsIfNodeFCBasedGathers INTEGER,
fsIfNodeDeviceFCBasedGathers INTEGER
}
fsIfDeviceTrafficIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The device traffic interface index."
::= { fsIfDeviceTrafficEntry 1 }
fsIfFC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FC type.
2--BASE_X_10
4--BASE_X_100
6--BASE_X_1000
8--BASE_X_10000
9--BASE_ERROR"
::= { fsIfDeviceTrafficEntry 2 }
fsIfFCTransRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmission rate of the FC."
::= { fsIfDeviceTrafficEntry 3 }
fsIfFCTransPktsNum OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmission packets number of the FC."
::= { fsIfDeviceTrafficEntry 4 }
fsIfFCDiscardRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The discard rate of the FC."
::= { fsIfDeviceTrafficEntry 5 }
fsIfFCDiscardPktsNum OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The discard packets number of the FC."
::= { fsIfDeviceTrafficEntry 6 }
fsIfFCPktsLossRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The packets loss rate of the FC."
::= { fsIfDeviceTrafficEntry 7 }
fsIfFCBandwidthRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bandwidth rate of the FC."
::= { fsIfDeviceTrafficEntry 8 }
fsIfFCBandwidthPercentage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bandwidth percentage of the FC."
::= { fsIfDeviceTrafficEntry 9 }
fsIfDeviceFCGathers OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gathers of the device FC."
::= { fsIfDeviceTrafficEntry 10 }
fsIfFullMeshFCGathers OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gathers of the whole network FC."
::= { fsIfDeviceTrafficEntry 11 }
fsIfClassBasedGathers OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Class-based Gathers."
::= { fsIfDeviceTrafficEntry 12 }
fsIfNodeBasedGathers OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Node-based Gathers."
::= { fsIfDeviceTrafficEntry 13 }
fsIfNodeClassBasedGathers OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Node&class-based Gathers."
::= { fsIfDeviceTrafficEntry 14 }
fsIfNodeFCBasedGathers OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Node&FC-based Gathers."
::= { fsIfDeviceTrafficEntry 15 }
fsIfNodeDeviceFCBasedGathers OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Node&device&FC-based Gathers."
::= { fsIfDeviceTrafficEntry 16 }
-- Notification
fsInterfaceTraps OBJECT IDENTIFIER ::= { fsInterfaceMIB 2 }
lineDetectStatus OBJECT-TYPE
SYNTAX INTEGER{
ok(1), --line has restored to normal state
open(2), --a break in the line
short(3) --short circuit in the line
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The type of storm of interface"
::= { fsInterfaceTraps 1 }
lineDetectPosition OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Location where the break or short circuit in the line happens
(Distance from the switch port, in metre.)"
::= { fsInterfaceTraps 2 }
lineQualityDetect NOTIFICATION-TYPE
OBJECTS {ifIndex, lineDetectStatus,lineDetectPosition}
STATUS current
DESCRIPTION
"The notification of discovering a break or short circuit in the line,
or restoring the line to the normal state."
::= { fsInterfaceTraps 3 }
fsInterfaceMIBConformance OBJECT IDENTIFIER ::= { fsInterfaceMIB 3 }
fsInterfaceMIBCompliances OBJECT IDENTIFIER ::= { fsInterfaceMIBConformance 1 }
fsInterfaceMIBGroups OBJECT IDENTIFIER ::= { fsInterfaceMIBConformance 2 }
-- compliance statements
fsInterfaceMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the FS Interface MIB"
MODULE -- this module
MANDATORY-GROUPS { fsInterfaceMIBGroup
}
GROUP fsPortTypeChooseMibGroup
DESCRIPTION
"This group is mandatory when system supports optional port type."
GROUP fsIfMTUMibGroup
DESCRIPTION
"This group is mandatory when system supports MTU setting."
GROUP fsIfLineDetectGroup
DESCRIPTION
"This group is mandatory when system supports line quality detection."
GROUP fsIfAvailableBWMibGroup
DESCRIPTION
"This group is mandatory when system supports available bandwidth getting."
::= { fsInterfaceMIBCompliances 1 }
-- units of conformance
fsInterfaceMIBGroup OBJECT-GROUP
OBJECTS {
fsIfIndex,
fsIfPortType,
fsIfFlowControlAdminStatus,
fsIfFlowControlOperStatus,
fsIfAdminSpeed,
fsIfAdminDuplex,
fsIfOperSpeed,
fsIfOperDuplex,
fsIfManageStatus,
fsIfIpBroadcast,
fsIfLayer,
fsIfMode,
fsIfCounterClear,
fsIfEntryStatus,
fsIfMediumType,
fsIfDownCounter,
fsIfInOctets,
fsIfOutOctets,
fsIfBcastInhibit,
fsIfNegotiation,
fsIfPhysAddress,
fsIfAdminSpeedRW,
fsIfAdminDuplexRW,
fsIfModeRW,
fsIfSpeed,
fsifAdminStatus,
fsifOperStatus,
fsIfInNUcastPkts,
fsIfOutNUcastPkts,
fsIfUpDownTimes,
fsifAdminStatusw,
fsifOperStatusw,
fsifSpeedw,
fsifMacAddress,
fsifLastChange,
fsIfInPkts,
fsIfDiscard,
fsIfBandwidthUsage,
fsIfInBitsRate,
fsIfInPktRate,
fsIfOutBitsRate,
fsIfOutPktRate,
fsIfInBandwidthUsage,
fsIfOutBandwidthUsage,
fsIfInErrorPktsRate,
fsIfOutErrorPktsRate,
fsIfInDropPktsRate,
fsIfOutDropPktsRate,
fsIfIpIfIndex,
fsIfIpId,
fsIfIp,
fsIfIpMask,
fsIfIpEntryStatus,
fsIfStatusIndex,
fsIfStatusLoopBackExamine,
fsIfErrorStatus,
fsGlobalIfDisableRecovery,
fsIfSVICreatVlanNum,
fsIfHandleSVI,
fsIfEncapsulationIndex,
fsIfEncapsulationVlan,
fsApPhyAddress,
fsApIfNumber,
fsApIfPhyIntNum,
fsApPhysAddress,
fsApIfIndex,
fsApIfDescr,
fsApIfType,
fsApIfMtu,
fsApIfSpeed,
fsApIfPhysAddress,
fsApIfAdminStatus,
fsApIfOperStatus,
fsApIfLastChange,
fsApIfInOctets,
fsApIfInUcastPkts,
fsApIfInNUcastPkts,
fsApIfInDiscards,
fsApIfInErrors,
fsApIfInUnknownProtos,
fsApIfOutOctets,
fsApIfOutUcastPkts,
fsApIfOutNUcastPkts,
fsApIfOutDiscards,
fsApIfOutErrors,
fsApIfOutQLen,
fsApIfLinkUPTimes,
fsApIfInDataOctets,
fsApIfOutDataOctets,
fsApIfMgmtUploadOctets,
fsApIfMgmtDownloadOctets,
fsApIfSpeedw,
fsApIfMtuw,
fsApIfPhysAddressw,
fsApIfInUcastPktsw,
fsApIfInNUcastPktsw,
fsApIfOutUcastPktsw,
fsApIfOutNUcastPktsw,
fsApIfLinkUPTimesw,
fsApIfInPkts,
fsApIfInFlow,
fsApIfOutFlow,
fsApIfInBrdcastPkts,
fsApIfOutBrdcastPkts,
fsApIfInMulcastPkts,
fsApIfOutMulcastPkts,
fsApIfInPayloadOctets,
fsApIfOutPayloadOctets,
fsApIfAlias,
fsApIfInDateRate,
fsApIfOutDateRate,
fsApifInNormalPkts,
fsApIfOutPkts,
fsIfLinkIndex,
fsIfUplinkInOctets,
fsIfUplinkInUcastPkts,
fsIfUplinkInNUcastPkts,
fsIfUplinkInDiscards,
fsIfUplinkInErrors,
fsIfUplinkOutOctets,
fsIfUplinkOutUcastPkts,
fsIfUplinkOutNUcastPkts,
fsIfUplinkOutDiscards,
fsIfUplinkOutErrors,
fsIfDownlinkInOctets,
fsIfDownlinkInUcastPkts,
fsIfDownlinkInNUcastPkts,
fsIfDownlinkInDiscards,
fsIfDownlinkInErrors,
fsIfDownlinkOutOctets,
fsIfDownlinkOutUcastPkts,
fsIfDownlinkOutNUcastPkts,
fsIfDownlinkOutDiscards,
fsIfDownlinkOutErrors,
fsIfUplinkInBcastPkts,
fsIfUplinkOutBcastPkts,
fsIfDownlinkInBcastPkts,
fsIfDownlinkOutBcastPkts
}
STATUS current
DESCRIPTION
"A collection of objects providing interface basic configure ."
::= { fsInterfaceMIBGroups 1 }
fsPortTypeChooseMibGroup OBJECT-GROUP
OBJECTS {
fsPortTypeChooseIndex,
fsPortTypeChooseType
}
STATUS current
DESCRIPTION
"Information collection of choosing port type."
::= { fsInterfaceMIBGroups 2 }
fsIfMTUMibGroup OBJECT-GROUP
OBJECTS {
fsIfMTUIndex,
fsIfMTU
}
STATUS current
DESCRIPTION
"Interface MTU information collection."
::= { fsInterfaceMIBGroups 3 }
fsIfLineDetectGroup OBJECT-GROUP
OBJECTS {
fsIfLineDetect
}
STATUS current
DESCRIPTION
"Information collection of line quality detection."
::= { fsInterfaceMIBGroups 4 }
fsIfAvailableBWMibGroup OBJECT-GROUP
OBJECTS {
fsIfAvailableBWIfIndex,
fsIfAvailableBWIfBW
}
STATUS current
DESCRIPTION
"Interface available bandwidth information collection."
::= { fsInterfaceMIBGroups 5 }
END
View Git Blame Copy Permalink