WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/ceragon/CERAGON-MIB

19374 lines
581 KiB
Plaintext
Raw Permalink Blame History

CERAGON-MIB DEFINITIONS ::= BEGIN
--Title: CERAGON MIB
-- Copyright 1997 CERAGON.
-- All Rights Reserved.
-- It is CERAGON's intent to encourage the widespread use of
-- this Specification in connection with the management of
-- CERAGON's products. CERAGON grants vendors, end-users,
-- and other interested parties a non-exclusive license to
-- use this Specification in connection with the management
-- of CERAGON's products.
-- This Specification is supplied "as is," and CERAGON makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
IMPORTS
Counter, enterprises,
IpAddress, Gauge FROM RFC1155-SMI
DisplayString, ifIndex FROM RFC1213-MIB
OBJECT-TYPE FROM RFC-1212
TRAP-TYPE FROM RFC-1215;
-- Gauge32 FROM SNMPv2-SMI;
-- sonetSectionCurrentStatus FROM SONET-MIB;
-- RowStatus FROM SNMPv2-TC;
-- Some MIB compilers need those two lines:
-- enterprises OBJECT IDENTIFIER ::=
-- { iso org(3) dod(6) internet(1) private(4) 1 }
ceragon OBJECT IDENTIFIER ::= { enterprises 2281 }
-- Version: 5.05e
-- ***************************** 1500P ****************************
-- Supported by IDC version 4.95xx for Regenerator and Jupiter (DS3).
-- Supported by IDC version O2.88 for Omega (Encryption).
-- Supported by IDC version 4.96x for Falcon (FE+8E1\T1).
-- Supported by IDC version 5.10xx for Typhoon (GbE+8E1\T1)
-- Supported by IDC version 4.9xxx for Summit (64E1\T1+FE)
-- ***************************** 3200T ****************************
-- Supported by IDC version 5.0xxx for AVALON (N+1)
-- ***************************** 1500 *****************************
-- Supported by IDC version 5.22 for (FibeAir15xx)
--First Version Date: 15.04.97
--Last Update: 15.05.2007
gnOID OBJECT IDENTIFIER ::= { ceragon 1} -- list of products
gnFirstOID OBJECT IDENTIFIER ::= { gnOID 1 } -- First product
gnSystem OBJECT IDENTIFIER ::= { ceragon 2 }
--This group contains general parameters of the system.
gnGeneral OBJECT IDENTIFIER ::= { gnSystem 1}
--gnGenHWVersion OBJECT-TYPE
-- SYNTAX DisplayString
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "This parameter specifies the version of the hardware."
-- ::= { gnGeneral 1 }
--gnGenSWVersion OBJECT-TYPE
-- SYNTAX DisplayString
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "This parameter specifies the version of the software."
-- ::= { gnGeneral 2 }
gnGenStandardOrg OBJECT-TYPE
SYNTAX INTEGER {
etsi(2),
fcc(3),
japan(4),
lmds(5),
cmds(6),
australia(7),
other(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies which international standard is used."
::= { gnGeneral 1 }
gnGenTxFreqRange OBJECT-TYPE
SYNTAX INTEGER {
from37000to37350(2), -- FCC RX Range: 37700->38050
from37350to37700(3), -- FCC RX Range: 38050->38400
from37700to38050(4), -- FCC
from38050to38400(5), -- FCC
from38600to38950(6), -- FCC RX Range: 39300->39650
from38950to39300(7), -- FCC RX Range: 39650->40000
from39300to39650(8), -- FCC
from39650to40000(9), --FCC
from37058to37618(10), --ETSI RX Range: 38318->38878
from37618to38178(11), --ETSI RX Range: 38878->39438
from38318to38878(12), --ETSI
from38878to39438(13), --ETSI
notUsed(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies frequency ranges in Hertz. Value 1 to 13 are used
when the link
is working with channels. The notUsed value is used when the link is
working with frequency."
::= { gnGeneral 2 }
gnGenRemoteConnection OBJECT-TYPE
SYNTAX INTEGER {
connected(2),
disconnected(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Is the connection between the local manager and
the remote manager."
::= { gnGeneral 3 }
gnGenRemoteDistance OBJECT-TYPE
SYNTAX INTEGER (100..30000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is the distance between the local and remote ODU, in meters.
This attribute does not auto-detect the distance.
It is used as part of the unfaded RSL calculation feature in the element manager."
::= { gnGeneral 4 }
gnGenInterLenLocalRemote OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is the FEC interleaver length - DONT CHANGE THIS FIELD !!!.
WRITE will change both local and remote sides."
::= { gnGeneral 5 }
gnGenTxFreqLocalRemote OBJECT-TYPE
SYNTAX INTEGER (0..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates the radio TX channel number.
WRITE will change both LOCAL and REMOTE sides.
Not all radios will support TX frequency change via channel numbers."
DEFVAL { 1}
::= { gnGeneral 6}
gnGenRealTimeandDate OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter specifies the real time and date
Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
A date-time specification.
field octets contents range
----- ------ -------- -----
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
8 9 direction from UTC '+' / '-'
9 10 hours from UTC 0..11
10 11 minutes from UTC 0..59
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT
would be displayed as: 07 c8 05 1a 0d 1e 0f 00
( 1992 -5 -26,13:30:15 )
Note that if only local time is known, then timezone
information (fields 8-10) is not present."
::= { gnGeneral 7 }
gnGenCfgDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGenCfgDeviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains general configuration info
per device, local and remote."
::= { gnGeneral 8 }
gnGenCfgDeviceEntry OBJECT-TYPE
SYNTAX GnGenCfgDeviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing general configuration information, for both local and
remote sides."
INDEX { gnGenCfgDeviceId }
::= { gnGenCfgDeviceTable 1 }
GnGenCfgDeviceEntry ::=
SEQUENCE {
gnGenCfgDeviceId
INTEGER,
gnGenCfgDeviceResetPerfMon
INTEGER,
gnGenCfgDeviceOperation
INTEGER,
gnGenCfgActivateLoopback
INTEGER,
gnGenCfgF1DataChanConnector -- was LineConnector;
-- if DB9 connector, indicates NEW regenerator hardware.
INTEGER,
gnGenCfgWaySideConnector --was RadioConnector
INTEGER,
gnGenCfgActivateChanLoopback
INTEGER,
gnGenCfgInterLenLocalOnly
INTEGER ,
gnGenCfgSlipIp
IpAddress,
gnGenCfgSlipModemConnection
DisplayString,
gnGenCfgSlipSpeed
INTEGER,
gnGenCfgAlarmSeverity
OCTET STRING,
gnGenCfgODUSerialNumber
DisplayString,
gnGenCfgIDUSerialNumber
DisplayString,
gnGenCfgAlarmText
DisplayString,
gnGenCfgTrapSeverity
INTEGER,
gnGenCfgProductType -- merge with tftp
INTEGER,
gnGenCfgLeftMediumConnector
INTEGER,
gnGenCfgMiddleMediumConnector
INTEGER,
gnGenCfgPrimaryClockSource
INTEGER,
gnGenCfgSecondaryClockSource
INTEGER,
gnGenCfgTrapOption
INTEGER,
gnGenCfgCLLI
DisplayString,
gnGenCfgHeartbeatPeriod
INTEGER,
gnGenCfgGetRemoteData
INTEGER,
gnGenCfgClearLoopTimeout
INTEGER,
gnGenCfgSubProductType
INTEGER
}
gnGenCfgDeviceId OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the device table entry (local or
Remote)."
::= { gnGenCfgDeviceEntry 1 }
gnGenCfgDeviceResetPerfMon OBJECT-TYPE
SYNTAX INTEGER {
reset(2),
noAction(3),
clearFastEthernetStatistics(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset performance monitoring. "
DEFVAL { noAction }
::= { gnGenCfgDeviceEntry 2 }
gnGenCfgDeviceOperation OBJECT-TYPE
SYNTAX INTEGER {
noOperation(2),
softwareReset(3),
setDefaultConf(4),
clearMainManagerSoftware(5),
resetODU(6),
resetMUX(7),
resetSwOdu(8) -- phos odu only.
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter allows the NMS to perform operations.
(3) will implement software RESET
(4) will SET all factory default configurations, including IP address!
(5) will CLEAR IDU software
NOTE: CLEARING IDU software will cause the IDU to use the factory BOOT
software version.
4 and 5 will take place only after reset of the IDU"
DEFVAL { noOperation }
::= { gnGenCfgDeviceEntry 3 }
gnGenCfgActivateLoopback OBJECT-TYPE
SYNTAX INTEGER {
noOperation(2),
loopbackSPI(3),
--- loopbackMUX(4),
loopbackMDM(5),
loopbackOuterSPI(6),
-- localTechnSPIloopback(7),
-- localTechnMUXloopback(8),
-- localTechnMDMloopback(9),
localODUloopback(10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls the loop back diagnostics operations.
For remote units, only SPI, MUX and MDM loopbacks are allowed.
"
DEFVAL { noOperation }
::= { gnGenCfgDeviceEntry 4 }
gnGenCfgF1DataChanConnector OBJECT-TYPE
SYNTAX INTEGER {
noInterface(1), -- No interface
rs232db25(2), -- V24
v35(3),
rs422db25(4), --RS-530
rj45CoDirect(5),
rj45bridge(6), -- Ethernet bridge
x21db15(7),
rs232db9(8) -- New regenerator hardware
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the physical interface of the F1 line data channel
(USER CHANNEL connection). "
DEFVAL { rs232db25 }
::= { gnGenCfgDeviceEntry 5 }
gnGenCfgWaySideConnector OBJECT-TYPE
SYNTAX INTEGER {
noInterface(1), -- No interface
rs232db25(2), -- V24
v35(3),
rs422db25(4), -- RS-530
connectorE1(5),
rj45bridge(6), -- Ethernet Bridge
x21db15(7),
connectorT1(8),
lineSTM4(9),
clockUnit2M(10),
clockUnit1dot5M(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the physical interface of the radio E1 way side channel
(WAYSIDE CHANNEL connection)."
DEFVAL { noInterface }
::= { gnGenCfgDeviceEntry 6 }
gnGenCfgActivateChanLoopback OBJECT-TYPE
SYNTAX INTEGER {
noOperation(2),
loopbackDataChan(3),
loopbackWaySide(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls the USER CHANNEL and WAYSIDE channel
loopback diagnostic operations.
(3) will activate the 64k data channel loopback (USER CHANNEL)
(4) will activate the WAYSIDE CHANNEL loopback."
DEFVAL { noOperation }
::= { gnGenCfgDeviceEntry 7 }
gnGenCfgInterLenLocalOnly OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is the FEC interleaver length .DONT CAHNGE THIS FIELD !!! .
WRITE will change the local side only."
::= { gnGenCfgDeviceEntry 8 }
gnGenCfgSlipIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the SERIAL interface IP address.
Included for future development, not currently supported."
::= { gnGenCfgDeviceEntry 9 }
gnGenCfgSlipModemConnection OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The telephone number to which the modem will initialize a call,
upon generation of a TRAP.
The number must be entered numerically (for example 18001234567)."
::= { gnGenCfgDeviceEntry 10 }
gnGenCfgSlipSpeed OBJECT-TYPE
SYNTAX INTEGER {
baud9600(1),
baud19200(2),
baud38400(3),
baud57600(4),
baud115200(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SERIAL interface baud rate."
::= { gnGenCfgDeviceEntry 11 }
gnGenCfgAlarmSeverity OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is used only by the element management
application
Every Trap severity 4 bits.
15 (MAJOR), 7 (MINOR), 3 (WARNING) and 1 (EVENT) options.
The first 4 bits ODU Power supply severity,
then the Synthesizer severity ,then Tx level then RX level
ODU temperature, ODU loopback , IDU power supply , Cable,
Modem, IDU temperature, IDU loopbacks, External Alarm 1,
External Alarm 2 ,External Alarm 3, External Alarm 4,
External Alarm 5, External Alarm 6, External Alarm 7,
External Alarm 8, Remote connectivity, LOF, LOS, EXC, SD
J0 mismatch and system fault."
::= { gnGenCfgDeviceEntry 12 }
gnGenCfgODUSerialNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ODU serial number - up to 20 characters "
::= { gnGenCfgDeviceEntry 13 }
gnGenCfgIDUSerialNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the IDU serial number - up to 20 characters "
::= { gnGenCfgDeviceEntry 14}
gnGenCfgAlarmText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The private trap text, describing the last generated trap text."
::= { gnGenCfgDeviceEntry 15}
gnGenCfgTrapSeverity OBJECT-TYPE
SYNTAX INTEGER
{
clear (0),
event (1),
warning (3),
minor (7),
major (15),
critical (31)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current Trap severity, describing the last generated trap
severity"
::= { gnGenCfgDeviceEntry 16 }
-- *******************************************************************
-- The following fields were added for the Access product
-- *******************************************************************
gnGenCfgProductType OBJECT-TYPE
SYNTAX INTEGER
{
accessMux (2),
sdhRegenerator (3),
narrowBandPdhRepeater (4),
accessMuxStm0 (5),
plex6200 (6),
adm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The product type."
::= { gnGenCfgDeviceEntry 17 }
gnGenCfgLeftMediumConnector OBJECT-TYPE
SYNTAX INTEGER {
noInterface(1), -- No interface
twoDS3(2),
oneDS3(3),
twoE3(4),
oneE3(5),
oneFastEthernet(6),
fiberSTM1(7),
electricalSTM1(8),
utpSTM1(9),
stpSTM1(10),
twoSTM1(11),
eightE1(12),
eightT1(13),
hitLess(14),
fiberSTM1Trib(15),
electricalSTM1Trib(16),
hitLessWithBridge(17),
opticalFastEthernet(18)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For ACCESS hardware, this indicates the first (left) interface connector."
DEFVAL { twoDS3 }
::= { gnGenCfgDeviceEntry 18 }
gnGenCfgMiddleMediumConnector OBJECT-TYPE
SYNTAX INTEGER {
noInterface(1), -- No interface
twoDS3(2),
oneDS3(3),
twoE3(4),
oneE3(5),
oneFastEthernet(6),
fiberSTM1(7),
electricalSTM1(8),
utpSTM1(9),
stpSTM1(10),
twoSTM1(11),
eightE1(12),
eightT1(13),
hitLess(14),
fiberSTM1Trib(15),
electricalSTM1Trib(16),
hitLessWithBridge(17),
opticalFastEthernet(18)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For ACCESS hardware, this indicates the second (right)interface connector."
DEFVAL { oneDS3 }
::= { gnGenCfgDeviceEntry 19 }
gnGenCfgPrimaryClockSource OBJECT-TYPE
SYNTAX INTEGER {
internalClock(2),
external2MB(3),
radioClock(4),
fiberClock(5),
external2MHz(6),
external1AndHalfMB(7),
tributaryClock1(8),
tributaryClock2(9),
tributaryClock3(10),
tributaryClock4(11),
tributaryClock5(12),
tributaryClock6(13),
tributaryClock7(14),
tributaryClock8(15),
tributaryClock9(16),
tributaryClock10(17),
tributaryClock11(18),
tributaryClock12(19),
tributaryClock13(20),
tributaryClock14(21),
tributaryClock15(22),
tributaryClock16(23),
tribSTM1(24)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The primary clock source, configurable for ACCESS radios only."
DEFVAL { internalClock }
::= { gnGenCfgDeviceEntry 20 }
gnGenCfgSecondaryClockSource OBJECT-TYPE
SYNTAX INTEGER {
internalClock(2),
external2MB(3),
radioClock(4),
fiberClock(5),
external2MHz(6),
external1AndHalfMB(7),
tributaryClock1(8),
tributaryClock2(9),
tributaryClock3(10),
tributaryClock4(11),
tributaryClock5(12),
tributaryClock6(13),
tributaryClock7(14),
tributaryClock8(15),
tributaryClock9(16),
tributaryClock10(17),
tributaryClock11(18),
tributaryClock12(19),
tributaryClock13(20),
tributaryClock14(21),
tributaryClock15(22),
tributaryClock16(23),
tribSTM1(24)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The secondary clock source, configurable for ACCESS radios only."
DEFVAL { internalClock }
::= { gnGenCfgDeviceEntry 21 }
gnGenCfgTrapOption OBJECT-TYPE
SYNTAX INTEGER (0..31)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This item defines various trap options (0-31):
0 - SNSN (STANDARD TRAPS DO NOT INCLUDE SERIAL NUMBER)
1 - ASN (ALL TRAPS INCLUDE SERIAL NUMBER)
2 - SNSN, DNLR (DO NOT REPORT LOCAL TRAPS FROM REMOTE IDU)
3 - ASN, DNLR
4 - SNSN, EVT (USE DIFFERENT TRAP ID FOR EACH ALARM TYPE)
5 - ASN, EVT
6 - SNSN, DNLR, EVT
7 - ASN, DNLR, EVT
* - Add 8 to your choice for excluding traps with id >= 128.
Example: for SNSN, DNLR with this filter write 10 (=8+2).
** - Add another 16 to your choice in order to send 'clear' traps with zero severity."
DEFVAL { 0 }
::= { gnGenCfgDeviceEntry 22 }
gnGenCfgCLLI OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Common Language Location Identifier (maximum length: 30)"
::= { gnGenCfgDeviceEntry 23 }
gnGenCfgHeartbeatPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This item defines the number of minutes between each trap"
DEFVAL { 0 }
::= { gnGenCfgDeviceEntry 24 }
gnGenCfgGetRemoteData OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
DEFVAL {off}
::= { gnGenCfgDeviceEntry 25 }
gnGenCfgClearLoopTimeout OBJECT-TYPE
SYNTAX INTEGER (0..1440)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This item defines the clear loopbacks timeout in minutes.
possible values: 0..1440.
0 means disable. "
DEFVAL { 0 }
::= { gnGenCfgDeviceEntry 26 }
gnGenCfgSubProductType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"lsb bit: 1 if 1500i or 1528i 0 otherwise."
::= { gnGenCfgDeviceEntry 27 }
gnGenStatDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGenStatDeviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains general configuration info
per device; local and remote."
::= { gnGeneral 9 }
gnGenStatDeviceEntry OBJECT-TYPE
SYNTAX GnGenStatDeviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing general configuration information per device, both
local and remote sides."
INDEX { gnGenStatDeviceId }
::= { gnGenStatDeviceTable 1 }
GnGenStatDeviceEntry ::=
SEQUENCE {
gnGenStatDeviceId
INTEGER,
gnGenStatDeviceCelsiusTemp
INTEGER,
gnGenStatDeviceFahrenheitTemp
INTEGER,
-- The following variables are concerning the service of the IDU
gnGenStatDevicePowerSupply
OCTET STRING,
gnGenStatDeviceCable
INTEGER,
gnGenStatDeviceDryContact
OCTET STRING,
gnGenStatDeviceLeds
OCTET STRING,
gnGenStatInternalCommunication
OCTET STRING ,
gnGenStatDeviceFanStatus
OCTET STRING,
gnGenStatDeviceODUStatus
OCTET STRING,
gnGenStatDeviceIDUStatus
OCTET STRING,
gnGenStatDeviceRSTStatus
OCTET STRING
}
gnGenStatDeviceId OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2),
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates which device is involved
in the specific row."
::= { gnGenStatDeviceEntry 1 }
gnGenStatDeviceCelsiusTemp OBJECT-TYPE
SYNTAX INTEGER (-10..70)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the temperature of the modem of the IDU in degrees of
Celsius."
::= { gnGenStatDeviceEntry 2 }
gnGenStatDeviceFahrenheitTemp OBJECT-TYPE
SYNTAX INTEGER (14..158)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the temperature of the modem of the IDU in degrees of
Fahrenheit."
::= { gnGenStatDeviceEntry 3 }
gnGenStatDevicePowerSupply OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This octet represents the status of the power
supplies of the IDU:
bit 1 on = 3.3V faulty
bit 2 on = -5V faulty
bit 3 on = 5V faulty.
bit 4 on = +8V faulty "
::= { gnGenStatDeviceEntry 4 }
gnGenStatDeviceCable OBJECT-TYPE
SYNTAX INTEGER {
ok(2),
short(3),
open(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the cable to the ODU."
::= { gnGenStatDeviceEntry 5 }
gnGenStatDeviceDryContact OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the dry contacts, Each input status is represented by a bit.
When the input is on, the bit value is 0.When the input is off, the bit
value is 1.
The MSB represents external alarm 8. For example when only external alarm
1 is
on the status value will be 0xFE00"
::= { gnGenStatDeviceEntry 6 }
gnGenStatDeviceLeds OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(3))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the IDU front panel LEDs. For the management station use. "
::= { gnGenStatDeviceEntry 7 }
gnGenStatInternalCommunication OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of internal communication problem
bit 1 = 1: between main CPU and ODU CPU.
bit 2 = 1: between main CPU and MUX CPU.
bit 3 = 1: between master main CPU and slave main CPU."
::= { gnGenStatDeviceEntry 8 }
gnGenStatDeviceFanStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the IDU fans 1-2 or 1-4.
bit 1 = IDU Fan1 is faulty.
bit 2 = IDU Fan2 is faulty.
bit 3 = IDU Fan2 is faulty.
bit 4 = IDU Fan2 is faulty."
::= { gnGenStatDeviceEntry 9 }
gnGenStatDeviceODUStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ODU status reported with this parameter.
Bit1 is MSB. The bit is set when a fault occurs.
The bit is cleared when the fault clears.
bit 1 = Power Supply status
bit 2 = Synthesizer lock status
bit 3 = Tx level status
bit 4 = ATPC status
bit 5 = Rx level status
bit 6 = Not currently used.
bit 7 = Temperature status
bit 8 = Not currently used.
bit 9 = ODU loopback status.
bit 10 = Internal use (by application).
bit 11 = Tx is in Mute.
"
::= { gnGenStatDeviceEntry 10 }
gnGenStatDeviceIDUStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDU status reported with this parameter. Bit1 is MSB.
The bit is set when a fault occurs. The bit is
cleared when the fault clears.
bit 1 = Power status
bit 2 = Cable open status
bit 3 = Cable short status
bit 4 = Modem Lock status
bit 5 = Temperature status
bit 6 = No signal from ODU (Phos only)
bit 7 = loopback status
bit 8 = External alarm 1 status
bit 9 = External alarm 2 status
bit 10 = External alarm 3 status
bit 11 = External alarm 4 status
bit 12 = External alarm 5 status
bit 13 = External alarm 6 status
bit 14 = External alarm 7 status
bit 15 = External alarm 8 status
bit 16 = Remote connectivity status.
bit 17 = Inner communication status.
bit 18 = Link ID mismatch status.
bit 19 = Configuration mismatch status.
bit 20 = Shelf Id mismatch status (Phos only).
bit 21 = General HW failure.
bit 22 = No power to MUX board.
bit 23 = No power to MODEM board.
bit 24 = IDC disk firmware cinfiguration mismatch.
bit 25 = Modem configuration file.
bit 26 = Wayside channel E1/T1 LOS
bit 27 = loopback on Wayside channel
"
::= { gnGenStatDeviceEntry 11 }
gnGenStatDeviceRSTStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bit is set when a fault occurs. The bit is
cleared when the fault clears.
bit 1 = Line loss of frame status
bit 2 = Radio loss of frame status
bit 3 = Line EXC status
bit 4 = Radio EXC status
bit 5 = Line SD status
bit 6 = Radio SD status
bit 7 = loss of signal status
bit 8 = J0 mismatch.
bit 9 = Line UNE status.
"
::= { gnGenStatDeviceEntry 12 }
gnGenChannelBandwidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The TX channel bandwidth, displayed in 1/100 MHz.
For example:
An STM-1 ETSI TX channel bandwidth of 56MHz is displayed as the value 5600."
::= { gnGeneral 10 }
gnGenTxFreqNumLocalRemote OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the radio transmit frequency, displayed in
1/100 MHz. WRITE changes the local and remote sides. Only for systems that
support frequency configuration (Not channel)."
::= { gnGeneral 11}
gnGenProtocolType OBJECT-TYPE
SYNTAX INTEGER {
gnSDH(2),
gnSONET(3),
gnSONET-C(4),
gnSDH-C(5) --SDH-concatenated for plex6200 (stm4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the radio mapping protocol. -C represents 'concatenated'. "
::= { gnGeneral 12}
gnGenLinkId OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0 for 'old' system that doesn't support the link ID.
the user can enter values from 1 to 65535"
DEFVAL {0}
::= { gnGeneral 13 }
gnGenMibVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current software version supports this MIB version (and the previous MIB versions)."
::= { gnGeneral 14 }
gnGenModemType OBJECT-TYPE
SYNTAX INTEGER {
gn16QAM(2),
gn32QAM(3),
gn128QAM(4),
gn256QAM(5),
gn64QAM(6),
gn4QAM(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system modem type."
::= { gnGeneral 15 }
gnGenRadioSide OBJECT-TYPE
SYNTAX INTEGER {
east(2),
west(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
DEFVAL {east}
::= { gnGeneral 16 }
gnGenSystemWorkTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The System Work Time (hours)."
DEFVAL {0}
::= { gnGeneral 17 }
gnGenRxFreqNumLocalRemote OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the radio receive frequency, displayed in
1/100 MHz. WRITE changes the local and remote sides. Only for systems that
support frequency configuration (Not channel)."
::= { gnGeneral 18}
gnGenLastCfgTimeandDate OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter specifies the last configuration change time and date
Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
A date-time specification.
field octets contents range
----- ------ -------- -----
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
8 9 direction from UTC '+' / '-'
9 10 hours from UTC 0..11
10 11 minutes from UTC 0..59
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT
would be displayed as: 07 c8 05 1a 0d 1e 0f 00
( 1992 -5 -26,13:30:15 )
Note that if only local time is known, then timezone
information (fields 8-10) is not present."
::= { gnGeneral 19 }
gnGenMostSevereAlarm OBJECT-TYPE
SYNTAX INTEGER {
clear (0),
event (1),
warning (3),
minor (7),
major (15),
critical (31)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies the current moset severe alarm in the system."
::= { gnGeneral 20 }
gnGenIdcCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGenIdcCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { gnGeneral 21 }
gnGenIdcCfgEntry OBJECT-TYPE
SYNTAX GnGenIdcCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
INDEX { gnGenIdcCfgId }
::= { gnGenIdcCfgTable 1 }
GnGenIdcCfgEntry ::=
SEQUENCE {
gnGenIdcCfgId
INTEGER,
gnGenIdcCfgXpicMode
INTEGER,
gnGenIdcCfgResetPerfMon
INTEGER,
gnGenIdcCfgOperation
INTEGER,
gnGenIdcCfgWaySideConnector
INTEGER,
gnGenIdcCfgHeartbeatPeriod
INTEGER,
gnGenIdcCfgClearLoopTimeout
INTEGER,
gnGenIdcCfgSlipIp
IpAddress,
gnGenIdcCfgSlipModemConnection
DisplayString,
gnGenIdcCfgSlipSpeed
INTEGER,
gnGenIdcCfgAlarmSeverity
OCTET STRING,
gnGenIdcCfgIDUSerialNumber
DisplayString,
gnGenIdcCfgTrapOption
INTEGER,
gnGenIdcCfgCLLI
DisplayString,
gnGenIdcCfgEowCascadeStatus
INTEGER,
gnGenIdcCfgSerialPPPAdminStatus
INTEGER
}
gnGenIdcCfgId OBJECT-TYPE
SYNTAX INTEGER
{
local(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnGenIdcCfgEntry 1 }
gnGenIdcCfgXpicMode OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
DEFVAL { disable }
::= { gnGenIdcCfgEntry 2 }
gnGenIdcCfgResetPerfMon OBJECT-TYPE
SYNTAX INTEGER {
reset(2),
noAction(3),
clearFastEthernetStatistics(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset performance monitoring. "
DEFVAL { noAction }
::= { gnGenIdcCfgEntry 3 }
gnGenIdcCfgOperation OBJECT-TYPE
SYNTAX INTEGER {
noOperation(2),
softwareReset(3),
setDefaultConf(4),
setIDCDefaultConf(5),
hardwareColdReset(6),
hardwareSoftReset(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
DEFVAL { noOperation }
::= { gnGenIdcCfgEntry 4 }
gnGenIdcCfgWaySideConnector OBJECT-TYPE
SYNTAX INTEGER {
noInterface(1), -- No interface
connectorE1(2),
connectorT1(3),
connectorDualE1(4),
connectorDualT1(5),
connectorDual10baseT(6) -- Ethernet Bridge
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the physical interface of the radio E1 way side channel
(WAYSIDE CHANNEL connection)."
DEFVAL { noInterface }
::= { gnGenIdcCfgEntry 5 }
gnGenIdcCfgHeartbeatPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This item defines the number of minutes between each trap"
DEFVAL { 0 }
::= { gnGenIdcCfgEntry 6 }
gnGenIdcCfgClearLoopTimeout OBJECT-TYPE
SYNTAX INTEGER (0..1440)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This item defines the clear loopbacks timeout in minutes.
possible values: 0..1440.
0 means disable. "
DEFVAL { 0 }
::= { gnGenIdcCfgEntry 7 }
gnGenIdcCfgSlipIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the SERIAL interface IP address."
::= { gnGenIdcCfgEntry 8 }
gnGenIdcCfgSlipModemConnection OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The telephone number to which the modem will initialize a call,
upon generation of a TRAP.
The number must be entered numerically (for example 18001234567)."
::= { gnGenIdcCfgEntry 9 }
gnGenIdcCfgSlipSpeed OBJECT-TYPE
SYNTAX INTEGER {
baud9600(1),
baud19200(2),
baud38400(3),
baud57600(4),
baud115200(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SERIAL interface baud rate."
::= { gnGenIdcCfgEntry 10 }
gnGenIdcCfgAlarmSeverity OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is used only by the element management application."
::= { gnGenIdcCfgEntry 11 }
gnGenIdcCfgIDUSerialNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the IDU serial number - up to 20 characters "
::= { gnGenIdcCfgEntry 12}
gnGenIdcCfgTrapOption OBJECT-TYPE
SYNTAX INTEGER (0..31)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This item defines various trap options (0-15):
0 - SNSN (STANDARD TRAPS DO NOT INCLUDE SERIAL NUMBER)
1 - ASN (ALL TRAPS INCLUDE SERIAL NUMBER)
2 - SNSN, DNLR (DO NOT REPORT LOCAL TRAPS FROM REMOTE IDU)
3 - ASN, DNLR
4 - SNSN, EVT (EVENTS ARE REPORTED AS TRAPS)
5 - ASN, EVT
6 - SNSN, DNLR, EVT
7 - ASN, DNLR, EVT
* - Add 8 to your choice for excluding traps with id >= 128.
Example: for SNSN, DNLR with this filter write 10 (=8+2).
** - Add another 16 to your choice in order to send 'clear' traps with zero severity."
DEFVAL { 0 }
::= { gnGenIdcCfgEntry 13 }
gnGenIdcCfgCLLI OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Common Language Location Identifier (maximum length: 30)"
::= { gnGenIdcCfgEntry 14 }
gnGenIdcCfgEowCascadeStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Not used!!."
DEFVAL { disable }
::= { gnGenIdcCfgEntry 15 }
gnGenIdcCfgSerialPPPAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable\Disable PPP over serial interface."
DEFVAL { enable }
::= { gnGenIdcCfgEntry 16 }
-- Deleted two parameters (15 and 16) Eitan 16.11.
-- Add tftp server suppot (15) Haim
gnGenIdcStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGenIdcStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { gnGeneral 22 }
gnGenIdcStatEntry OBJECT-TYPE
SYNTAX GnGenIdcStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
INDEX { gnGenIdcStatId }
::= { gnGenIdcStatTable 1 }
GnGenIdcStatEntry ::=
SEQUENCE {
gnGenIdcStatId
INTEGER,
gnGenIdcStatXpicSupport
INTEGER,
gnGenIdcStatLeds
OCTET STRING,
gnGenIdcStatIDUStatus
OCTET STRING,
gnGenIdcStatMMCCardStatus
OCTET STRING,
gnGenIdcStatDryContact
OCTET STRING,
gnGenIdcStatFanStatus
OCTET STRING,
gnGenIdcStatLeftDrawerStatus
INTEGER,
gnGenIdcStatRightDrawerStatus
INTEGER,
gnGenIdcStatHitlessSupport
INTEGER,
gnGenIdcStatEowExistence
INTEGER,
gnGenIdcStatEowSupport
INTEGER,
gnGenIdcStatIduPosition
INTEGER,
gnGenIdcStatBoardType
INTEGER,
gnGenIdcStatAgentIPAddress
IpAddress,
gnGenIdcStatInterfaceConnector
INTEGER,
gnGenIdcStatIfTableCounter
INTEGER
}
gnGenIdcStatId OBJECT-TYPE
SYNTAX INTEGER
{
local(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnGenIdcStatEntry 1 }
gnGenIdcStatXpicSupport OBJECT-TYPE
SYNTAX INTEGER
{
yes(2),
no(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnGenIdcStatEntry 2 }
gnGenIdcStatLeds OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(3))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnGenIdcStatEntry 3 }
gnGenIdcStatIDUStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(3))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDU status reported with this parameter. Bit1 is MSB.
The bit is set when a fault occurs. The bit is
cleared when the fault clears.
bit 1 = Fans status
bit 2 = configuration mismatch
bit 3 = Internal use
bit 4 = Internal use
bit 5 = XPIC cable swap
bit 6 = External alarm 1 status
bit 7 = External alarm 2 status
bit 8 = External alarm 3 status
bit 9 = External alarm 4 status
bit 10 = External alarm 5 status
bit 12 = External alarm 6 status
bit 13 = External alarm 7 status
bit 14 = External alarm 8 status
bit 15 = Auxiliary interface card is down
"
::= { gnGenIdcStatEntry 4 }
gnGenIdcStatMMCCardStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bit1 is MSB.
bit 1 = 0=MMC card exist, 1=MMC card not exist
bit 2 = MMC card status: 0=ok, 1=fault "
::= { gnGenIdcStatEntry 5 }
gnGenIdcStatDryContact OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the dry contacts, Each input status is represented by a bit."
::= { gnGenIdcStatEntry 6 }
gnGenIdcStatFanStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the IDU fans 1-2 or 1-4.
bit 1 = IDU Fan1 is faulty.
bit 2 = IDU Fan2 is faulty.
bit 3 = IDU Fan2 is faulty.
bit 4 = IDU Fan2 is faulty."
::= { gnGenIdcStatEntry 7 }
gnGenIdcStatLeftDrawerStatus OBJECT-TYPE
SYNTAX INTEGER
{
noDrawer(2),
drawerDown(3),
drawerUp(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnGenIdcStatEntry 8 }
gnGenIdcStatRightDrawerStatus OBJECT-TYPE
SYNTAX INTEGER
{
noDrawer(2),
drawerDown(3),
drawerUp(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnGenIdcStatEntry 9 }
gnGenIdcStatHitlessSupport OBJECT-TYPE
SYNTAX INTEGER {
supported(2),
notSupported(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for hitless support."
::= { gnGenIdcStatEntry 10 }
gnGenIdcStatEowExistence OBJECT-TYPE
SYNTAX INTEGER {
exist(2),
notExist(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter sight physical existence of the EOW connector."
::= { gnGenIdcStatEntry 11 }
gnGenIdcStatEowSupport OBJECT-TYPE
SYNTAX INTEGER {
supported(2),
notSupported(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for EOW (cascade) support."
::= { gnGenIdcStatEntry 12 }
gnGenIdcStatIduPosition OBJECT-TYPE
SYNTAX INTEGER {
upper(2),
lower(3),
single(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for idu position."
::= { gnGenIdcStatEntry 13 }
gnGenIdcStatBoardType OBJECT-TYPE
SYNTAX INTEGER {
v1(2),
v2(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for the board type."
::= { gnGenIdcStatEntry 14 }
gnGenIdcStatAgentIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for the Agent IP address."
::= { gnGenIdcStatEntry 15 }
gnGenIdcStatInterfaceConnector OBJECT-TYPE
SYNTAX INTEGER {
notExist(2),
oneFEplus64E1(3),
twoFEplus64E1(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for the interface connector type."
::= { gnGenIdcStatEntry 16 }
gnGenIdcStatIfTableCounter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter is initialize to a random number and increment on every change of the IfTable
(This is for NMS use)."
::= { gnGenIdcStatEntry 17 }
gnGeneralXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGeneralXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { gnGeneral 23 }
gnGeneralXEntry OBJECT-TYPE
SYNTAX GnGeneralXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
INDEX { gnGenXId }
::= { gnGeneralXTable 1 }
GnGeneralXEntry ::=
SEQUENCE {
gnGenXId
INTEGER,
gnGenXStandardOrg
INTEGER,
gnGenXRemoteConnection
INTEGER,
gnGenXLinkId
INTEGER,
gnGenXModemType
INTEGER,
gnGenXRadioSide
INTEGER,
gnGenXSystemWorkTime
INTEGER,
gnGenXOperation
INTEGER,
gnGenXResetPerfMon
INTEGER,
gnGenXAlarmSeverity
OCTET STRING,
gnGenXCarrierSerialNumber
DisplayString,
gnGenXMUXSerialNumber
DisplayString,
gnGenXProductType
INTEGER,
gnGenXCarrierConnector
INTEGER,
gnGenXInterfacesLeds
OCTET STRING,
gnGenXMultiRateMultiConsConf
INTEGER,
gnGenXMultiRateMultiConsSupport
OCTET STRING,
gnGenXWaysideChannel
INTEGER,
gnGenXWaySideLoopback
INTEGER,
gnGenXSyncIdcDataBase
INTEGER,
gnGenXAesEnable
INTEGER,
gnGenXAesMkeyMode
INTEGER,
gnGenXActNumOfInterfaceOnClass1
INTEGER,
gnGenXActNumOfInterfaceOnClass2
INTEGER,
gnGenXActNumOfInterfaceOnClass3
INTEGER,
gnGenXEowStatus
INTEGER,
gnGenXTempLicenseEnable
INTEGER,
gnGenXTempLicenseTimer
INTEGER,
gnGenXDefectBlocks
INTEGER,
gnGenXBytesCorrected
INTEGER,
gnGenXPrbsTest
INTEGER,
gnGenXClearCounters
INTEGER,
gnGenXMuxLicense
OCTET STRING
}
gnGenXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnGeneralXEntry 1 }
gnGenXStandardOrg OBJECT-TYPE
SYNTAX INTEGER {
etsi(2),
fcc(3),
japan(4),
lmds(5),
cmds(6),
australia(7),
other(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies which international standard is used."
::= { gnGeneralXEntry 2 }
gnGenXRemoteConnection OBJECT-TYPE
SYNTAX INTEGER {
connected(2),
disconnected(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Is the connection between the local manager and
the remote manager."
::= { gnGeneralXEntry 3 }
gnGenXLinkId OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0 for 'old' system that doesn't support the link ID.
the user can enter values from 1 to 65535"
DEFVAL {0}
::= { gnGeneralXEntry 4 }
gnGenXModemType OBJECT-TYPE
SYNTAX INTEGER {
gn16QAM(2),
gn32QAM(3),
gn128QAM(4),
gn256QAM(5),
gn64QAM(6),
gn4QAM(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system modem type."
::= { gnGeneralXEntry 5 }
gnGenXRadioSide OBJECT-TYPE
SYNTAX INTEGER {
east(2),
west(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
DEFVAL {east}
::= { gnGeneralXEntry 6 }
gnGenXSystemWorkTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The System Work Time (hours)."
DEFVAL {0}
::= { gnGeneralXEntry 7 }
gnGenXOperation OBJECT-TYPE
SYNTAX INTEGER
{
noOperation(2),
setMuxDefaultConf(3),
hardwareColdReset(4),
hardwareWarmReset(5),
softwareODCReset(6),
hardwareODCReset(7),
resetAllDrawers(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
DEFVAL { noOperation }
::= { gnGeneralXEntry 8 }
gnGenXResetPerfMon OBJECT-TYPE
SYNTAX INTEGER {
reset(2),
noAction(3),
clearFastEthernetStatistics(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset performance monitoring. "
DEFVAL { noAction }
::= { gnGeneralXEntry 9 }
gnGenXAlarmSeverity OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is used only by the element management
application Every Trap severity 4 bits.
15 (MAJOR), 7 (MINOR), 3 (WARNING) and 1 (EVENT) options.
The first 4 bits ODU Power supply severity,
then the Synthesizer severity ,then Tx level then RX level
ODU temperature, ODU loopback , IDU power supply , Cable,
Modem, IDU temperature, IDU loopbacks, External Alarm 1,
External Alarm 2 ,External Alarm 3, External Alarm 4,
External Alarm 5, External Alarm 6, External Alarm 7,
External Alarm 8, Remote connectivity, LOF, LOS, EXC, SD
J0 mismatch and system fault."
::= { gnGeneralXEntry 10 }
gnGenXCarrierSerialNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the carrier serial number - up to 20 characters "
::= { gnGeneralXEntry 11 }
gnGenXMUXSerialNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the MUX serial number - up to 20 characters "
::= { gnGeneralXEntry 12 }
gnGenXProductType OBJECT-TYPE
SYNTAX INTEGER
{
accessMux (2),
sdhRegenerator (3),
narrowBandPdhRepeater (4),
accessMuxStm0 (5),
plex6200 (6),
adm (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The product type."
::= { gnGeneralXEntry 13 }
gnGenXCarrierConnector OBJECT-TYPE
SYNTAX INTEGER {
noInterface(2),
oneElectricalSTM1(3),
oneFiberSTM1SingleMode(4),
oneFiberSTM1MultiMode(5),
twoElectricalSTM1(6),
twoFiberSTM1SingleMode(7),
twoFiberSTM1MultiMode(8),
oneFEOnly(9),
oneFEplus4E1(10),
oneFEplus8E1(11),
oneFEplus4T1(12),
oneFEplus8T1(13),
twoFEOnly(14),
twoFEplus4E1(15),
twoFEplus8E1(16),
twoFEplus4T1(17),
twoFEplus8T1(18),
oneDS3(19),
threeDS3(20),
oneE3(21),
threeE3(22),
oneOpticalGBEOnly(23),
oneOpticalGBEPlus8E1(24),
oneOpticalGBEPlus8T1(25),
oneElectricalGBEOnly(26),
oneElectricalGBEPlus8E1(27),
oneElectricalGBEPlus8T1(28),
oneFEplus64E1(29),
oneFEplus64T1(30),
eightE1Only(31),
eightT1Only(32),
oneStm1XC(33),
twoStm1XC(34)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For ACCESS hardware, this indicates the first (left) interface connector."
::= { gnGeneralXEntry 14 }
gnGenXInterfacesLeds OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Interface LEDs. For the management station use.
Each two bits represents one led as follows: 00 - Gray, 01 - Green, 10 - Orange, 11 - Red.
The led order: Led1 is msb 2 bits , after it led2, till led 16 - 2 lsb bits."
::= { gnGeneralXEntry 15 }
gnGenXMultiRateMultiConsConf OBJECT-TYPE
SYNTAX INTEGER {
mrmc1528(1),
mrmc1550(2),
mrmc3156(3),
mrmc3150(4),
mrmc1228(5),
mrmc1540(6),
mrmc4410(7),
mrmc4420(8),
mrmc4440(9),
mrmc1125(10),
mrmc2050(11),
mrmc2030(12),
mrmc1340(13),
mrmc3756(18),
acm56(24),
acm50(25),
acm28(26)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Link data capacity"
::= { gnGeneralXEntry 16 }
gnGenXMultiRateMultiConsSupport OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { gnGeneralXEntry 17 }
gnGenXWaysideChannel OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Enable Disable drawer wayside channel "
DEFVAL { disable }
::= { gnGeneralXEntry 18 }
gnGenXWaySideLoopback OBJECT-TYPE
SYNTAX INTEGER {
noloopback(2),
waySideLoop(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls the WAYSIDE channel loopback diagnostic operations."
DEFVAL { noloopback }
::= { gnGeneralXEntry 19 }
gnGenXSyncIdcDataBase OBJECT-TYPE
SYNTAX INTEGER {
noOperation(2),
idcToDrawer(3),
drawerToIdc(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
DEFVAL { noOperation }
::= { gnGeneralXEntry 20 }
gnGenXAesEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3),
notSupport(4),
systemFailure(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter defines encryption admin mode."
DEFVAL { disable }
::= { gnGeneralXEntry 21 }
gnGenXAesMkeyMode OBJECT-TYPE
SYNTAX INTEGER {
auto(2),
manual(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter is not used."
DEFVAL { auto }
::= { gnGeneralXEntry 22 }
gnGenXActNumOfInterfaceOnClass1 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the actual number of interfaces on class 1."
DEFVAL { 0 }
::= { gnGeneralXEntry 23 }
gnGenXActNumOfInterfaceOnClass2 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the actual number of interfaces on class 2."
DEFVAL { 0 }
::= { gnGeneralXEntry 24 }
gnGenXActNumOfInterfaceOnClass3 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the actual number of interfaces on class 3."
DEFVAL { 0 }
::= { gnGeneralXEntry 25 }
gnGenXEowStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Not used."
DEFVAL { disable }
::= { gnGeneralXEntry 26 }
gnGenXTempLicenseEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3),
notSupported(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set temporary license enable or disable."
DEFVAL { disable }
::= { gnGeneralXEntry 27 }
gnGenXTempLicenseTimer OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the temporary license timer."
DEFVAL { 0 }
::= { gnGeneralXEntry 28 }
gnGenXDefectBlocks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of defected blocks that could not be corrected by the
FEC "
::= { gnGeneralXEntry 29 }
gnGenXBytesCorrected OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of bytes corrected by the FEC"
::= { gnGeneralXEntry 30 }
gnGenXPrbsTest OBJECT-TYPE
SYNTAX INTEGER {
notActive(2),
active(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter enable the user to activate the PRBS test."
DEFVAL { notActive }
::= { gnGeneralXEntry 31 }
gnGenXClearCounters OBJECT-TYPE
SYNTAX INTEGER {
noAction(2),
clearCounters(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter enable the user to clear the PRBS counters."
DEFVAL { noAction }
::= { gnGeneralXEntry 32 }
gnGenXMuxLicense OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Inidcation for license features.
Bit #0-#4 - Ethernet througput limit."
::= { gnGeneralXEntry 33 }
gnGenAddAlarmExtToTraps OBJECT-TYPE
SYNTAX INTEGER {
no (2),
yes (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If chose 'yes', the Alarm Id, Origin and Unit from gnAgnCurrentAlarmTable
will be bind to the end of each private trap."
DEFVAL { no }
::= { gnGeneral 24 }
gnGenFeatureSupport OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Inidcation for feature support. msb is for bit #1.
The bit is set when a specific feature is support.
Bit #1 - Tftp server support.
Bit #2 - Cold reset support.
Bit #3 - Severity critical for external alarm.
Bit #4 - MRMC filter table.
Bit #5 - NeighborIP Support Fast and DS3.
Bit #6 - Auxiliary channel drawer routing support.
Bit #7 - Single drawer external protection support.
Bit #8 - dual drawer external protection not support.
Bit #9 - Left Drawer XPIC hardware support (0 - support, 1 - not support).
Bit #10 - Right Drawer XPIC hardware support (0 - support, 1 - not support).
Bit #11 - Internal Protection Not Supported (0 - support, 1 - not support).
Bit #12 - One Ws Channel Only (0 - FALSE, 1 - TRUE).
Bit #13 - Protect option not support (0 - support, 1 - not support).
Bit #14 - UC ethernet support (0 - not support, 1 - support).
Bit #15 - WSC only disable (0 - enable & disable, 1 - only disable).
Bit #16 - UC only disable (0 - enable & disable, 1 - only disable).
Bit #17 - EOW only disable (0 - enable & disable, 1 - only disable).
Bit #18 - Left Drawer modem latency Not support (0 - support, 1 - not support).
Bit #19 - Right Drawer modem latency Not support (0 - support, 1 - not support).
Bit #20 - Clear PM for drawer (0 - support, 1 - not support).
Bit #21 - Allow Sync mode in UC#2 (0 - not allow, 1 - allow).
Bit #22 - External Alarm Switch not support (0 - support, 1 - not support).
Bit #23 - Is Hitless config [Divesity Type,Revertive Mode and Revertive Time] are disable (0 - enable, 1 - disable).
Bit #24 - QoS left carrier support (1 - support, 0 - not support).
Bit #25 - QoS right carrier support (1 - support, 0 - not support).
Bit #26 - ACM left carrier support (1 - support, 0 - not support).
Bit #27 - ACM right carrier support (1 - support, 0 - not support).
Bit #28 - ACM adaptive left carrier support (1 - support, 0 - not support).
Bit #29 - ACM adaptive right carrier support (1 - support, 0 - not support).
Bit #30 - Single left board reset not support (0 - support, 1 - not support).
Bit #31 - Single right board reset not support (0 - support, 1 - not support).
Bit #32 - Left drawer reset not support (0 - support,1 - not support).
Bit #33 - Right drawer reset not support (0 - support,1 - not support).
Bit #34 - All drawers reset support (0 - not support,1 - support).
Bit #35 - License manager not support (0 - support,1 - not support).
Bit #36 - Multi radio protection support (1 - support,0 - not support).
Bit #37 - Copy IDC to left drawer not support (0 - support,1 - not support).
Bit #38 - Copy IDC to right drawer not support (0 - support,1 - not support).
Bit #39 - Copy IDC to all drawers support (0 - not support,1 - support).
Bit #40 - Gigabit flow control support on left carrier(1 - support,0 - not support).
Bit #41 - Gigabit flow control support on right carrier(1 - support,0 - not support).
Bit #42 - Gigabit PM and statistics support on left carrier(1 - support,0 - not support).
Bit #42 - Gigabit PM and statistics support on right carrier(1 - support,0 - not support)."
::= { gnGeneral 25 }
gnGeneralMrmcXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGeneralMrmcXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= {gnGeneral 26}
gnGeneralMrmcXEntry OBJECT-TYPE
SYNTAX GnGeneralMrmcXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the supported modem configuration script for each drawer."
INDEX { gnGenMrmcXId, gnGenMrmcXMrmcVal}
::= { gnGeneralMrmcXTable 1 }
GnGeneralMrmcXEntry ::=
SEQUENCE {
gnGenMrmcXId
INTEGER,
gnGenMrmcXMrmcVal
INTEGER,
gnGenMrmcXBitRate
INTEGER,
gnGenMrmcXBandWidth
INTEGER,
gnGenMrmcXQam
INTEGER,
gnGenMrmcXScriptType
INTEGER
}
gnGenMrmcXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drawer number."
::= { gnGeneralMrmcXEntry 1 }
gnGenMrmcXMrmcVal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies MRMC value."
::= { gnGeneralMrmcXEntry 2 }
gnGenMrmcXBitRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies transfer bit rate."
::= { gnGeneralMrmcXEntry 3 }
gnGenMrmcXBandWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies channel band width."
::= { gnGeneralMrmcXEntry 4 }
gnGenMrmcXQam OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies modem qam."
::= { gnGeneralMrmcXEntry 5 }
gnGenMrmcXScriptType OBJECT-TYPE
SYNTAX INTEGER
{
v1(2),
v2(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies the type of the script.
v1 - Regular MRMC script.
v2 - ACM MRMC script."
::= { gnGeneralMrmcXEntry 6 }
gnGenDrawerXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGenDrawerXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates drawer x."
::= { gnGeneral 27 }
gnGenDrawerXEntry OBJECT-TYPE
SYNTAX GnGenDrawerXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing drawer x namd and id."
INDEX { gnGenDrawerXId}
::= { gnGenDrawerXTable 1 }
GnGenDrawerXEntry ::=
SEQUENCE {
gnGenDrawerXId
INTEGER,
gnGenDrawerXName
DisplayString (SIZE(0..20)),
gnGenDrawerXSlot1Status
INTEGER,
gnGenDrawerXSlot2Status
INTEGER,
gnGenDrawerXDeviceLeds
OCTET STRING,
gnGenDrawerXInternalCommunication
OCTET STRING,
gnGenDrawerXDeviceIDUStatus
OCTET STRING
}
gnGenDrawerXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the drawer's id"
::= { gnGenDrawerXEntry 1 }
gnGenDrawerXName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the drawer's name"
::= { gnGenDrawerXEntry 2 }
gnGenDrawerXSlot1Status OBJECT-TYPE
SYNTAX INTEGER {
notExist(2),
powerOff(3),
powerOn(4),
dbReady(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"notExist - board not exist.
powerOff - board inserted and power off.
powerOn - board inserted and power on.
dbReady - board is power on and DB ready."
DEFVAL { notExist }
::= { gnGenDrawerXEntry 3 }
gnGenDrawerXSlot2Status OBJECT-TYPE
SYNTAX INTEGER {
notExist(2),
powerOff(3),
powerOn(4),
dbReady(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"notExist - board not exist.
powerOff - board inserted and power off.
powerOn - board inserted and power on.
dbReady - board is power on and DB ready."
DEFVAL { notExist }
::= { gnGenDrawerXEntry 4 }
gnGenDrawerXDeviceLeds OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(3))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the IDU front panel LEDs. For the management station use. "
::= { gnGenDrawerXEntry 5 }
gnGenDrawerXInternalCommunication OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of internal communication problem
bit 1 = 1: between main CPU and ODU CPU.
bit 2 = 1: between main CPU and MUX CPU.
bit 3 = 1: between master main CPU and slave main CPU."
::= { gnGenDrawerXEntry 6 }
gnGenDrawerXDeviceIDUStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDU status reported with this parameter. Bit1 is MSB.
The bit is set when a fault occurs. The bit is
cleared when the fault clears.
bit 1 = Power status
bit 2 = Cable open status
bit 3 = Cable short status
bit 4 = Modem Lock status
bit 5 = Temperature status
bit 6 = No signal from ODU (Phos only)
bit 7 = loopback status
bit 8 = External alarm 1 status
bit 9 = External alarm 2 status
bit 10 = External alarm 3 status
bit 11 = External alarm 4 status
bit 12 = External alarm 5 status
bit 13 = External alarm 6 status
bit 14 = External alarm 7 status
bit 15 = External alarm 8 status
bit 16 = Remote connectivity status.
bit 17 = Inner communication status.
bit 18 = Link ID mismatch status.
bit 19 = Configuration mismatch status.
bit 20 = Shelf Id mismatch status (Phos only).
bit 21 = General HW failure.
bit 22 = No power to MUX board.
bit 23 = No power to MODEM board.
bit 24 = IDC disk firmware cinfiguration mismatch.
bit 25 = Modem configuration file.
bit 26 = Wayside channel E1/T1 LOS
bit 27 = loopback on Wayside channel
"
::= { gnGenDrawerXEntry 7 }
gnCluster OBJECT IDENTIFIER ::= { gnGeneral 28 }
cluster OBJECT IDENTIFIER ::= { gnCluster 1}
clusterSystemType OBJECT-TYPE
SYNTAX INTEGER {
unknown(2),
p1500(3),
t3200(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the system type: Phophorus, Avalon or Unknown Backplane"
::= { cluster 1 }
clusterNumOfSubRacks OBJECT-TYPE
SYNTAX INTEGER (1..3)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the number of subrack, 1st phase supporsts only 1"
::= { cluster 3 }
clusterSubRackNum OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the subrack's number"
::= { cluster 4 }
clusterFloorNum OBJECT-TYPE
SYNTAX INTEGER (0..9)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the subrack's number"
::= { cluster 5 }
clusterIPBase OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the Cluster IP base "
::= { cluster 6 }
clusterIDCRole OBJECT-TYPE
SYNTAX INTEGER {
clusterPrime(2),
member(3),
subrackManager(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates - ClusterPrime - 2nd floor of 1st rack, SubRackManager - 2nd floor of other racks."
::= { cluster 7 }
clusterPrimeIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value enable CV/PV to know the server IP even if it is not connected"
::= { cluster 8 }
clusterPeerIPLastChangeTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates The last time when the Peer IP Table changed"
::= { cluster 9 }
addressesTable OBJECT-TYPE
SYNTAX SEQUENCE OF AddressesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the cluster's IP Addresses."
::= { gnCluster 2 }
addressesEntry OBJECT-TYPE
SYNTAX AddressesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the cluster's IP Addresses."
INDEX { addressesPeerIPId}
::= { addressesTable 1 }
AddressesEntry ::=
SEQUENCE {
addressesPeerIPId
INTEGER,
addressesPeerIPAddress
IpAddress
}
addressesPeerIPId OBJECT-TYPE
SYNTAX INTEGER (1..9)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the peer IP id"
::= { addressesEntry 1 }
addressesPeerIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the IP address of a Server/Client. "
::= { addressesEntry 2 }
primeIDC OBJECT IDENTIFIER ::= { gnCluster 3}
primeIDCAutoInternalClockDistribution OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether the internal clock distribution is enabled or disabled. "
::= { primeIDC 1 }
primeIDCSynchronizeClockInCluster OBJECT-TYPE
SYNTAX INTEGER {
noaction(2),
synchronize(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether to synchronize the clock in the cluster. "
::= { primeIDC 2 }
backplaneSlotMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF BackplaneSlotMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the cluster's IP Addresses."
::= { gnCluster 4 }
backplaneSlotMappingEntry OBJECT-TYPE
SYNTAX BackplaneSlotMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the cluster's IP Addresses."
INDEX { backplaneSlotMappingSubrackId, backplaneSlotMappingFloorId, backplaneSlotMappingDrawerId, backplaneSlotMappingSubDrawerId}
::= { backplaneSlotMappingTable 1 }
BackplaneSlotMappingEntry ::=
SEQUENCE {
backplaneSlotMappingSubrackId
INTEGER (1..3),
backplaneSlotMappingFloorId
INTEGER (1..100),
backplaneSlotMappingDrawerId
INTEGER (1..3),
backplaneSlotMappingSubDrawerId
INTEGER (1..2),
backplaneSlotMappingUnitType
INTEGER,
backplaneSlotMappingUnitNumber
INTEGER (1..15),
backplaneSlotMappingUnitIndex
INTEGER
}
backplaneSlotMappingSubrackId OBJECT-TYPE
SYNTAX INTEGER (1..3)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the subrack index. "
::= { backplaneSlotMappingEntry 1 }
backplaneSlotMappingFloorId OBJECT-TYPE
SYNTAX INTEGER (1..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the floor id
The 4U floor index (upper) will be 99. "
::= { backplaneSlotMappingEntry 2 }
backplaneSlotMappingDrawerId OBJECT-TYPE
SYNTAX INTEGER (1..3)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For floors 1-3: IDC=1, Drawer 1=2, Drwaer2 =3. For 4U floor (floor #99), Aux=1, Power=2. "
::= { backplaneSlotMappingEntry 3 }
backplaneSlotMappingSubDrawerId OBJECT-TYPE
SYNTAX INTEGER (1..2)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the sub drawer id
IDC, Drawer 1 & 2 will be only 1. XC main (up) will be 1 and XC backup (lower) will be 2. "
::= { backplaneSlotMappingEntry 4 }
backplaneSlotMappingUnitType OBJECT-TYPE
SYNTAX INTEGER {
idc(2),
odu(3),
mux(4),
modem(5),
drawer(6),
unknown(7),
none(8),
xc(9),
auxInterface(10),
power(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The values are the same as in gnAgnCurrentAlarm Unit. "
::= { backplaneSlotMappingEntry 5 }
backplaneSlotMappingUnitNumber OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the unit number. "
::= { backplaneSlotMappingEntry 6 }
backplaneSlotMappingUnitIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the unit number. "
::= { backplaneSlotMappingEntry 7 }
gnSubrack OBJECT IDENTIFIER ::= { gnGeneral 29 }
powerInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF PowerInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the Power Input."
::= { gnSubrack 1 }
powerInputEntry OBJECT-TYPE
SYNTAX PowerInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the Power Input."
INDEX { powerInputId}
::= { powerInputTable 1 }
PowerInputEntry ::=
SEQUENCE {
powerInputId
INTEGER (1..6),
powerInputAdmin
INTEGER,
powerInputStatus
INTEGER,
powerInputLedStatus
OCTET STRING (SIZE(1))
}
powerInputId OBJECT-TYPE
SYNTAX INTEGER (1..6)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the power input Id. "
::= { powerInputEntry 1 }
powerInputAdmin OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether the power input Admin is enables or disabled. "
::= { powerInputEntry 2 }
powerInputStatus OBJECT-TYPE
SYNTAX INTEGER {
notexist(2),
unknown(3),
down(4),
up(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates whether the power input is up or down, Notexist when power input card not exist. unknown when no A-Aux."
::= { powerInputEntry 3 }
powerInputLedStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value, Led1 is MSB 2 bits.
Each two bits represents one led:00 - Gray,01 - Blue. "
::= { powerInputEntry 4 }
auxiliaryDrawer OBJECT IDENTIFIER ::= { gnSubrack 2 }
auxiliaryDrawerAuxCardType OBJECT-TYPE
SYNTAX INTEGER {
na(2),
v1(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates whether the Auxiliary Card type."
::= { auxiliaryDrawer 1 }
auxiliaryDrawerLedsStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value, Led16 is MSB 2 bits, Led1 is LSB 2 bits.
Each two bits represents one led:00 - Gray,01 - Green, 10 - Orange, 11 - Red.
Led 1: Status of WSC/UC Ethernet (upper connector, left side).
Led 2: Status of WSC/UC Ethernet (upper connector, right side).
Led 3: Status of WSC/UC Ethernet (lower connector, left side).
Led 4: Status of WSC/UC Ethernet (lower connector, right side).
Led 5: Reserved - Status of managment link (upper connector).
Led 6: Reserved - Status of managment activity (upper connector).
Led 7: Reserved - Status of managment link (lower connector).
Led 8: Reserved - Status of managment activity (lower connector).
Led 9: Status of WSC E1/T1 (upper connector, left side).
Led 10: Status of WSC E1/T1 (upper connector, right side).
Led 11: Status of WSC E1/T1 (lower connector, left side).
Led 12: Status of WSC E1/T1 (lower connector, right side).
Led 13: Status of EOW Cascading (upper connector, left side).
Led 14: Status of EOW Cascading (upper connector, right side).
Led 15: Reserved - Status of external fans (lower connector, left side).
Led 16: Reserved - Status of external fans (lower connector, right side)."
::= { auxiliaryDrawer 2 }
auxiliaryDrawerBoardHWVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the EEPROM value."
::= { auxiliaryDrawer 3 }
auxiliaryDrawerBoardFWVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the Register value ."
::= { auxiliaryDrawer 4 }
auxiliaryDrawerBoardPostResetFWVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the Register value ."
::= { auxiliaryDrawer 5 }
auxiliaryDrawerSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the EEPROM value."
::= { auxiliaryDrawer 6 }
auxiliaryDrawerBoardReset OBJECT-TYPE
SYNTAX INTEGER {
noaction(2),
reset(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether to reset board."
::= { auxiliaryDrawer 7 }
auxiliaryDrawerOrderWireCascading OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether the Order Wire Cascading is enables or disabled. "
::= { auxiliaryDrawer 8 }
xcDrawerTable OBJECT-TYPE
SYNTAX SEQUENCE OF XCDrawerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the XC Drawer."
::= { gnSubrack 3 }
xcDrawerEntry OBJECT-TYPE
SYNTAX XCDrawerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the XC Drawer."
INDEX { xcDrawerXCId}
::= { xcDrawerTable 1 }
XCDrawerEntry ::=
SEQUENCE {
xcDrawerXCId
INTEGER (1..6),
xcDrawerLedsStatus
OCTET STRING (SIZE(1)),
xcDrawerBoardHWVersion
INTEGER,
xcDrawerBoardFWVersion
DisplayString (SIZE(0..20)),
xcDrawerBoardPostResetFWVersion
DisplayString (SIZE(0..20)),
xcDrawerSerialNumber
DisplayString (SIZE(0..20)),
xcDrawerResetXCBoard
INTEGER,
xcDrawerXCSelfTestResult
INTEGER,
xcDrawerXCActivityRole
INTEGER,
xcDrawerSyncIdcDataBase
INTEGER,
xcDrawerXCConnector
INTEGER
}
xcDrawerXCId OBJECT-TYPE
SYNTAX INTEGER (1..6)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value, 1-2 for 1st rack, 3-4 for 2nd, 5-6 for 3rdy. "
::= { xcDrawerEntry 1 }
xcDrawerLedsStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value, Led1 is MSB 2 bits, Led4 is LSB .
Each two bits represents one led:00 - Gray,01 - Green, 10 - Orange, 11 - Red. "
::= { xcDrawerEntry 2 }
xcDrawerBoardHWVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the EEPROM value."
::= { xcDrawerEntry 3 }
xcDrawerBoardFWVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the Register value ."
::= { xcDrawerEntry 4 }
xcDrawerBoardPostResetFWVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the Register value ."
::= { xcDrawerEntry 5 }
xcDrawerSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the EEPROM value."
::= { xcDrawerEntry 6 }
xcDrawerResetXCBoard OBJECT-TYPE
SYNTAX INTEGER {
noaction(2),
reset(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether to reset XC."
::= { xcDrawerEntry 7 }
xcDrawerXCSelfTestResult OBJECT-TYPE
SYNTAX INTEGER {
passed(2),
failed(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the XC self test result."
::= { xcDrawerEntry 8 }
xcDrawerXCActivityRole OBJECT-TYPE
SYNTAX INTEGER {
active(2),
standby(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the XC activity role."
::= { xcDrawerEntry 9 }
xcDrawerSyncIdcDataBase OBJECT-TYPE
SYNTAX INTEGER {
noOperation(2),
idcToXC(3),
xcToIdc(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
DEFVAL { noOperation }
::= { xcDrawerEntry 10 }
xcDrawerXCConnector OBJECT-TYPE
SYNTAX INTEGER {
oneStm1XC(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the XC activity role."
::= { xcDrawerEntry 11 }
gnGenCarrierXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGenCarrierXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates carrier x."
::= { gnGeneral 30 }
gnGenCarrierXEntry OBJECT-TYPE
SYNTAX GnGenCarrierXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry of carrier x."
INDEX { gnGenCarrierXId}
::= { gnGenCarrierXTable 1 }
GnGenCarrierXEntry ::=
SEQUENCE {
gnGenCarrierXId
INTEGER,
gnGenCarrierXResetPerfMon
INTEGER,
gnGenCarrierXSyncIdcDataBase
INTEGER
}
gnGenCarrierXId OBJECT-TYPE
SYNTAX INTEGER
{
carrier1(3),
carrier2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the carrier id"
::= { gnGenCarrierXEntry 1 }
gnGenCarrierXResetPerfMon OBJECT-TYPE
SYNTAX INTEGER {
reset(2),
noAction(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset performance monitoring."
DEFVAL { noAction }
::= { gnGenCarrierXEntry 2 }
gnGenCarrierXSyncIdcDataBase OBJECT-TYPE
SYNTAX INTEGER {
noOperation(2),
idcToDrawer(3),
drawerToIdc(4),
idcToAllDrawers(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"idcToDrawer - copy configuration from the IDC disk to the HW (this operation istraffic effected).
drawerToIdc - copy configuration from HW to IDC disk.
this operation used to clear User Configuration Mismatch alarm.
idcToAllDrawers - copy configuration from the IDC disk to the all Drawer's HW (this operation istraffic effected)."
DEFVAL { noOperation }
::= { gnGenCarrierXEntry 3 }
--*******************************************************************
-- This group should contain all the MIB support for
-- Managers table, Trap masks and so on...
gnAgn OBJECT IDENTIFIER ::= { gnSystem 2}
gnAgnMgrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnAgnMgrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the managers list that will receive traps."
::= { gnAgn 1 }
gnAgnMgrEntry OBJECT-TYPE
SYNTAX GnAgnMgrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the managers IP addresses and the trap filter options."
INDEX { gnAgnMgrId}
::= { gnAgnMgrTable 1 }
GnAgnMgrEntry ::=
SEQUENCE {
gnAgnMgrId
INTEGER,
gnAgnMgrIP
IpAddress,
gnAgnMgrAlarmGroupMask
OCTET STRING,
gnAgnMgrSeverityFilter
OCTET STRING,
gnAgnMgrTrapPort
INTEGER
}
gnAgnMgrId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates an index of a specific manager"
::= { gnAgnMgrEntry 1 }
gnAgnMgrIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the managers IP address.
WRITE an IP address of all zeroes (0.0.0.0) will remove the entry. "
::= { gnAgnMgrEntry 2 }
gnAgnMgrAlarmGroupMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"bit mask .1 is 'send a trap' 0 is 'dont send a trap'.
The list of alarms from MSB to LSB is:
bit 1 = Power Supply Alarm
bit 2 = Cable Alarm
bit 3 = Temperature Alarm
bit 4 = External Alarm
bit 5 = Radio Alarm
bit 6 = Modem Alarm
bit 7 = Line Alarm
bit 8 = SDH Alarm
bit 9 = BER Alarm
bit 10 = System fault Alarm
bit 11 = Maintenance Alarm
If this field is 0, only standard traps will be sent to the manager"
::= { gnAgnMgrEntry 3 }
gnAgnMgrSeverityFilter OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is a bit mask value for masking traps according to its severity.
There is a bit for each severity. If the relevant bit is on (1), then
the Agent will send traps with this severity, and it won't send if the
bit is off (0).
The list of bits from LSB to MSB:
bit 1 (LSB) = Event.
bit 2 = Warning.
bit 3 = Minor.
bit 4 = Major.
bit 5 (MSB) = Critical."
::= { gnAgnMgrEntry 4 }
gnAgnMgrTrapPort OBJECT-TYPE
SYNTAX INTEGER (70..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Port for sending the trap for each manager (possible values: 70-65535)"
DEFVAL { 162 }
::= { gnAgnMgrEntry 5 }
gnAgnLogFileData OBJECT IDENTIFIER ::= { gnAgn 2 }
gnAgnLogFileMaxEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of entries. "
::= { gnAgnLogFileData 1 }
gnAgnLogFileValidEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of valid entries in the current logfile.
When this value exceeds 70% of capacity (100 entries),
the management station should store the file in its hard
disk.
If the management station is not active, the MIB will display up to
100
recent logfile events"
::= { gnAgnLogFileData 2 }
gnAgnLogFileAction OBJECT-TYPE
SYNTAX INTEGER {
clear(2),
save(3),
saveAndClear(4),
noAction(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute allows for logfile actions,
CLEARing the logfile and/or SAVING the logfile."
DEFVAL { noAction }
::= { gnAgnLogFileData 3 }
gnAgnLogFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnAgnLogFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is the agents alarm and event log file."
::= { gnAgnLogFileData 4 }
gnAgnLogFileEntry OBJECT-TYPE
SYNTAX GnAgnLogFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the agents alarm and event log file."
INDEX { gnAgnLogFileId}
::= { gnAgnLogFileTable 1 }
GnAgnLogFileEntry ::=
SEQUENCE {
gnAgnLogFileId
INTEGER,
gnAgnLogFileValid
INTEGER,
gnAgnLogFileDate
DisplayString,
gnAgnLogFileTime
DisplayString,
gnAgnLogFileSeverity
INTEGER,
gnAgnLogFileText
DisplayString,
gnAgnLogFileDeviceCelsiusTemp
INTEGER,
gnAgnLogFileDevicePowerSupply
OCTET STRING,
gnAgnLogFileInternalCommunication
OCTET STRING,
gnAgnLogFileDeviceFanStatus
OCTET STRING,
gnAgnLogFileDeviceODUStatus
OCTET STRING,
gnAgnLogFileDeviceIDUStatus
OCTET STRING,
gnAgnLogFileOduCelsiusTemp
INTEGER,
gnAgnLogFileOduReceiveLevel
INTEGER,
gnAgnLogFileOduSynthesizerVCOLock
OCTET STRING,
gnAgnLogFileOduPowerSupply
OCTET STRING,
gnAgnLogFileLineBERCur
INTEGER,
gnAgnLogFileRadioBERCur
INTEGER,
gnAgnLogFileModStatus
INTEGER,
gnAgnLogFileDemodStatus
INTEGER,
gnAgnLogFileLastDemodDefectBlocks
INTEGER,
gnAgnLogFileLastDemodBytesCorrected
INTEGER,
gnAgnLogFileLastDemodBlocksCorrected
INTEGER,
gnAgnLogFileUniqueId
INTEGER,
gnAgnLogFileSource
INTEGER,
gnAgnLogFileTimeT
INTEGER
}
gnAgnLogFileId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the index of an alarm logfile entry.
Entry 1 is the most recent logfile
event"
::= { gnAgnLogFileEntry 1 }
gnAgnLogFileValid OBJECT-TYPE
SYNTAX INTEGER { valid(2), notvalid(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the validity of the indexed alarm logfile entry.
a VALID log entry is (2) and an INVALID entry is (3)."
::= { gnAgnLogFileEntry 2 }
gnAgnLogFileDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the date the alarm occurred, formatted as YYYY-MM-DD.
YYYY represents the year, MM the month and DD -the day. "
::= { gnAgnLogFileEntry 3 }
gnAgnLogFileTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the hour the alarm occurred - format HH:MM.
HH - Hour, MM - minute"
::= { gnAgnLogFileEntry 4 }
gnAgnLogFileSeverity OBJECT-TYPE
SYNTAX INTEGER {
event(1),
warning(3),
minor(7),
major(15),
critical(31)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the severity of the alarm,
31 for CRITICAL, 15 for MAJOR, 7 for MINOR, 3 for WARNING and 1 for EVENT. "
::= { gnAgnLogFileEntry 5 }
gnAgnLogFileText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field describes the alarm that occurred. Max length 40
characters."
::= { gnAgnLogFileEntry 6 }
gnAgnLogFileDeviceCelsiusTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the temperature of the IDU in degrees Celsius,
during the alarm acceptance. "
::= {gnAgnLogFileEntry 7 }
gnAgnLogFileDevicePowerSupply OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Power supply status of the IDU, during the alarm
acceptance
bit 1 on = 3.3V faulty
bit 2 on = -5V faulty
bit 3 on = 5V faulty.
bit 4 on = +8V faulty "
::= {gnAgnLogFileEntry 8 }
gnAgnLogFileInternalCommunication OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the internal communication status of the IDU, during the alarm
acceptance
bit 1 = 1: between main CPU and ODU CPU.
bit 2 = 1: between main CPU and MUX CPU.
bit 3 = 1: between master main CPU and slave main CPU."
::= {gnAgnLogFileEntry 9 }
gnAgnLogFileDeviceFanStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Fan status of the IDU, during the alarm acceptance
bit 1 = Fan1 is faulty.
bit 2 = Fan 2 is faulty."
::= {gnAgnLogFileEntry 10 }
gnAgnLogFileDeviceODUStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ODU status during the alarm acceptance
bit 1 MSB
bit 1 = Power Supply status
bit 2 = Synthesizer lock status
bit 3 = Tx level status
bit 4 = ATPC status
bit 5 = Rx level status
bit 6 = Not currently used
bit 7 = Temperature status
bit 8 = Not currently used.
bit 9 = Not currently used"
::= {gnAgnLogFileEntry 11 }
gnAgnLogFileDeviceIDUStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(3))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the IDU status during the alarm acceptance
bit 1 MSB
bit 1 = Power status -
bit 2 = Cable open status -
bit 3 = Cable short status -
bit 4 = Modem Lock status
bit 5 = Temperature status
bit 6 = Not currently used.
bit 7 = loopback status
bit 8 = External alarm 1 status
bit 9 = External alarm 2 status
bit 10 = External alarm 3 status
bit 11 = External alarm 4 status
bit 12 = External alarm 5 status
bit 13 = External alarm 6 status
bit 14 = External alarm 7 status
bit 15 = External alarm 8 status
bit 16 = Remote connectivity status.
bit 17 = Inner communication status.
"
::= {gnAgnLogFileEntry 12 }
gnAgnLogFileOduCelsiusTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the temperature of the ODU in degrees Celsius,
during the alarm acceptance."
::= {gnAgnLogFileEntry 13 }
gnAgnLogFileOduReceiveLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the received signal level in DBM, during the alarm acceptance "
::= {gnAgnLogFileEntry 14 }
gnAgnLogFileOduSynthesizerVCOLock OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Synthesizer status, during the alarm acceptance
bit 1 on = TX IF synthesizer fault
bit 2 on = RX IF synthesizer fault
bit 3 on = Xband synthesizer fault
bit 4 on = History TX IF synthesizer fault
bit 5 on = History RX IF synthesizer fault
bit 6 on = History Xband synthesizer fault "
::= {gnAgnLogFileEntry 15 }
gnAgnLogFileOduPowerSupply OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ODU power supply status, during the alarm acceptance
bit 1 on = +5V faulty
bit 2 on = +8V faulty
bit 3 on = +12V faulty
bit 4 on = -12V faulty."
::= {gnAgnLogFileEntry 16 }
gnAgnLogFileLineBERCur OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Line BER (Bit Error Rate), during the alarm acceptance.
Included for future development, not currently supported."
::= {gnAgnLogFileEntry 17 }
gnAgnLogFileRadioBERCur OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Radio BER (Bit Error Rate), during the alarm acceptance.
Included for future development, not currently supported."
::= {gnAgnLogFileEntry 18 }
gnAgnLogFileModStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Modulator status, during the alarm acceptance
ok(2),
modulatorFault(3)"
::= {gnAgnLogFileEntry 19 }
gnAgnLogFileDemodStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Demodulator status, during the alarm acceptance . This field
is for internal use
internal debugging "
::= {gnAgnLogFileEntry 20 }
gnAgnLogFileLastDemodDefectBlocks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of the Defected blocks (blocks that couldn't be
corrected)
by the FEC, during the alarm acceptance last second."
::= {gnAgnLogFileEntry 21 }
gnAgnLogFileLastDemodBytesCorrected OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of the bytes that were corrected by the FEC,
during the alarm acceptance last second."
::= {gnAgnLogFileEntry 22 }
gnAgnLogFileLastDemodBlocksCorrected OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of the blocks that were corrected by the FEC
, during the alarm acceptance last second."
::= {gnAgnLogFileEntry 23 }
gnAgnLogFileUniqueId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unique Id for each log from 1 to 2,147,483,647 ( = 0x7FFFFFFF)."
::= {gnAgnLogFileEntry 24 }
gnAgnLogFileSource OBJECT-TYPE
SYNTAX INTEGER {
interfaces(1),
idc(2),
drawer1(3),
drawer2(4),
tIdc1(257),
tIdc2(258),
tIdc3(259),
tIdc4(260),
tIdc5(261),
tIdc6(262),
tIdc7(263),
tIdc8(264),
tIdc9(265),
tDrawer1(513),
tDrawer2(514),
tDrawer3(515),
tDrawer4(516),
tDrawer5(517),
tDrawer6(518),
tDrawer7(519),
tDrawer8(520),
tDrawer9(521),
tDrawer10(522),
tDrawer11(523),
tDrawer12(524),
tDrawer13(525),
tDrawer14(526),
tDrawer15(527),
tXC1(769),
tXC2(770),
tXC3(771),
tXC4(772),
tXC5(773),
tXC6(774)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The soure drawer of the alarm."
::= {gnAgnLogFileEntry 25 }
gnAgnLogFileTimeT OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time of the alarm represented by the number of seconds from 1.1.1970."
::= {gnAgnLogFileEntry 26 }
gnAgnLogFileHitlessSwitchLogAdmin OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute allows for hitless logfile actions."
DEFVAL { disable }
::= { gnAgnLogFileData 5 }
gnAgnLogFileXCSwitchLogAdmin OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute allows for XC logfile actions."
DEFVAL { disable }
::= { gnAgnLogFileData 6 }
gnAgnExternAlarm OBJECT IDENTIFIER ::= { gnAgn 3 }
gnAgnInExternAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnAgnInExternAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is the input external alarm table. "
::= { gnAgnExternAlarm 1 }
gnAgnInExternAlarmEntry OBJECT-TYPE
SYNTAX GnAgnInExternAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the external alarm inputs."
INDEX { gnAgnInExternAlarmDevId,gnAgnInExternAlarmIndex}
::= { gnAgnInExternAlarmTable 1 }
GnAgnInExternAlarmEntry ::=
SEQUENCE {
gnAgnInExternAlarmDevId
INTEGER,
gnAgnInExternAlarmIndex
INTEGER,
gnAgnInExternAlarmEnable
INTEGER,
gnAgnInExternAlarmText
DisplayString,
gnAgnInExternAlarmSeverity
INTEGER
}
gnAgnInExternAlarmDevId OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates device to which the external alarm
is connected - 1 Local, 2 Remote"
::= { gnAgnInExternAlarmEntry 1 }
gnAgnInExternAlarmIndex OBJECT-TYPE
SYNTAX INTEGER(1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the index of the input external alarm
1 to 8"
::= { gnAgnInExternAlarmEntry 2 }
gnAgnInExternAlarmEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates if this Input alarm is enabled."
DEFVAL { disabled }
::= { gnAgnInExternAlarmEntry 3 }
gnAgnInExternAlarmText OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field describes the external alarm. Max string 20 characters"
DEFVAL {"Alarm Description"}
::= { gnAgnInExternAlarmEntry 4 }
gnAgnInExternAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER {
event(1),
warning(3),
minor(7),
major(15),
critical(31)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the severity of the external alarm
31 CRITICAL ,15 MAJOR, 7 MINOR, 3 WARNING and 1 EVENT. "
DEFVAL { 1}
::= { gnAgnInExternAlarmEntry 5 }
gnAgnOutRelayAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnAgnOutRelayAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is the output relay alarm table. "
::= { gnAgnExternAlarm 2 }
gnAgnOutRelayAlarmEntry OBJECT-TYPE
SYNTAX GnAgnOutRelayAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the output relay alarms."
INDEX { gnAgnOutRelayAlarmDevId,gnAgnOutRelayAlarmIndex}
::= { gnAgnOutRelayAlarmTable 1 }
GnAgnOutRelayAlarmEntry ::=
SEQUENCE {
gnAgnOutRelayAlarmDevId
INTEGER,
gnAgnOutRelayAlarmIndex
INTEGER,
gnAgnOutRelayAlarmType
INTEGER
}
gnAgnOutRelayAlarmDevId OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates device from which the relay is sent
from - 1 Local, 2 Remote"
::= { gnAgnOutRelayAlarmEntry 1 }
gnAgnOutRelayAlarmIndex OBJECT-TYPE
SYNTAX INTEGER(1..5)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the index of the Output Relay alarm
1 to 5"
::= { gnAgnOutRelayAlarmEntry 2 }
gnAgnOutRelayAlarmType OBJECT-TYPE
SYNTAX INTEGER {
major(2),
minor(3),
warning(4),
external(5),
power(6),
ber(7),
line(8),
loopback(9),
lof(10),
idu(11),
odu(12),
cable(13),
remote(14),
critical(15),
testOn(16),
off(17),
xc(18)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the alarm/led that causes
the relay to change its state"
DEFVAL { major}
::= { gnAgnOutRelayAlarmEntry 3 }
-- *******************************************************************
gnAgnFileTransfer OBJECT IDENTIFIER ::= { gnAgn 4 }
gnAgnFileTransferDestination OBJECT-TYPE
SYNTAX INTEGER {
gnLocal (1)}
-- gnRemote (2)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The file destination. The file transfer destination will always be set to
1, LOCAL. "
::= { gnAgnFileTransfer 1 }
gnAgnFileTransferServerIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the server from which the file is loaded "
::= { gnAgnFileTransfer 2 }
gnAgnFileTransferFileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the file to be loaded, format 8.3. "
::= { gnAgnFileTransfer 3 }
gnAgnFileTransferTftpTotalTimeOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Receiving time-out value (seconds)."
-- DEFVAL { 20 }
::= { gnAgnFileTransfer 4 }
gnAgnFileTransferTransCmd OBJECT-TYPE
SYNTAX INTEGER {
gnStartMUXSoftwareDownLoad (1),
gnStartODUSoftwareDownLoad (2),
gnStartMainManagerSoftwareDownLoad (3),
gnCancel (4),
-- gnStartMUXSoftwareUpLoad (4),
-- gnStartODUSoftwareUpLoad (5),
gnNoOperation (255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The command to be executed on fileName at fileServerIP."
::= { gnAgnFileTransfer 5 }
gnAgnFileTransfertFtpStatus OBJECT-TYPE
SYNTAX INTEGER {
gnTftpSessionPreStartSession (1),
gnTftpSessionFileError (2),
gnTftpSessionRcvBlock (3),
gnTftpSessionRcvtimeout (4),
gnTftpSessionRcvError (5),
gnTftpSessionDone (6),
gnNoTftpSession (255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tftp session status "
::= { gnAgnFileTransfer 6 }
gnAgnFileTransfertftpBlockCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of blocks received in the current tFtp session "
::= { gnAgnFileTransfer 7 }
gnAgnFileTransferProtocol OBJECT-TYPE
SYNTAX INTEGER {
tftp (2),
ftp (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"File transfer protocol: tftp or ftp."
::= { gnAgnFileTransfer 8 }
gnAgnFileTransferUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User name - only for ftp protocol."
::= { gnAgnFileTransfer 9 }
gnAgnFileTransferPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Password - only for ftp protocol."
::= { gnAgnFileTransfer 10 }
gnAgnFileTransferIDCVersionControl OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Points to the IDC software version to be downloaded"
::= { gnAgnFileTransfer 11 }
gnAgnFileTransferODCVersionControl OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Points to the ODC software version to be downloaded"
::= { gnAgnFileTransfer 12 }
--//////////////////////////////////////
gnAgnInternalDownloadTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnAgnInternalDownloadEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table controls the Internal Download process
from manager to MUX and ODU (local and remote)."
::= { gnAgn 5 }
gnAgnInternalDownloadEntry OBJECT-TYPE
SYNTAX GnAgnInternalDownloadEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the internal download process controls, for local and
remote."
INDEX { gnAgnInternalDownloadId}
::= { gnAgnInternalDownloadTable 1 }
GnAgnInternalDownloadEntry ::=
SEQUENCE {
gnAgnInternalDownloadId
INTEGER,
gnAgnInternalDownloadOperation
INTEGER,
gnAgnInternalDownloadAction
INTEGER,
gnAgnInternalDownloadStatus
INTEGER,
gnAgnInternalDownloadBlockCount
INTEGER,
gnAgnInternalDownloadVersionControl
INTEGER,
gnAgnInternalDownloadFileSizeInBytes
INTEGER,
gnAgnInternalDownloadBytesCount
INTEGER
}
gnAgnInternalDownloadId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates an index of a specific Internal Download
operation."
::= { gnAgnInternalDownloadEntry 1 }
gnAgnInternalDownloadOperation OBJECT-TYPE
SYNTAX INTEGER {
localMUX(2),
localODU(3),
remoteMUX(4),
remoteODU(5),
leftShelfODU(6),
rightShelfODU(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Operation Description"
::= { gnAgnInternalDownloadEntry 2 }
gnAgnInternalDownloadAction OBJECT-TYPE
SYNTAX INTEGER { start(2),
cancel(3),
clear(4),
noAction(5),
upLoadFpga(6) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls the download action operation. "
DEFVAL { noAction}
::= { gnAgnInternalDownloadEntry 3 }
gnAgnInternalDownloadStatus OBJECT-TYPE
SYNTAX INTEGER {
gnInternalDownloadSessionError (1),
gnInternalDownloadSessionClearing (2),
gnInternalDownloadSessionSendBlock (3),
gnInternalDownloadSessiontimeout (4),
gnInternalDownloadSessionDone (5),
gnInternalDownloadSessionWaitForRetransmit (6), --phos odu
gnNoInternalDownloadSession (255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Internal download session status "
::= { gnAgnInternalDownloadEntry 4 }
gnAgnInternalDownloadBlockCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of blocks sent in the current session."
::= { gnAgnInternalDownloadEntry 5 }
gnAgnInternalDownloadVersionControl OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Points to the software version to be uploaded"
::= { gnAgnInternalDownloadEntry 6 }
gnAgnInternalDownloadFileSizeInBytes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of blocks in the current file"
::= { gnAgnInternalDownloadEntry 7 }
gnAgnInternalDownloadBytesCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes sent in the current session"
::= { gnAgnInternalDownloadEntry 8 }
--//////////////////////////////////////
--//////////////////////////////////////
gnAgnInterLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnAgnInterLinkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table controls the Inter Link Download process
between local and remote masters and between master and slave (local or
remote).
Each session transfers MUX, ODU or manager (IDC) software."
::= { gnAgn 6 }
gnAgnInterLinkEntry OBJECT-TYPE
SYNTAX GnAgnInterLinkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the process controls for the interlink download
process, for local and remote."
INDEX { gnAgnInterLinkId}
::= { gnAgnInterLinkTable 1 }
GnAgnInterLinkEntry ::=
SEQUENCE {
gnAgnInterLinkId
INTEGER,
gnAgnInterLinkSide
INTEGER,
gnAgnInterLinkSource
INTEGER,
gnAgnInterLinkDestination
INTEGER,
gnAgnInterLinkSoftware
INTEGER,
gnAgnInterLinkAction
INTEGER,
gnAgnInterLinkStatus
INTEGER,
gnAgnInterLinkBlockCount
INTEGER
}
gnAgnInterLinkId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the index of a specific InterLink
operation."
::= { gnAgnInterLinkEntry 1 }
gnAgnInterLinkSide OBJECT-TYPE
SYNTAX INTEGER {
local(2),
remote(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Link Side "
::= { gnAgnInterLinkEntry 2 }
gnAgnInterLinkSource OBJECT-TYPE
SYNTAX INTEGER {
me(2),
mate(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The source distribution center."
::= { gnAgnInterLinkEntry 3 }
gnAgnInterLinkDestination OBJECT-TYPE
SYNTAX INTEGER {
me(2),
mate(3),
remote(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The destination distribution center.
The destination may be selected as the local IDU being contacted (me),
the collocated local IDU, in a protected configuration (mate) or
it may be selected to be the remote IDU."
::= { gnAgnInterLinkEntry 4 }
gnAgnInterLinkSoftware OBJECT-TYPE
SYNTAX INTEGER {
manager(2),
mux(3),
odu(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The software type to be transferred. MUX, ODU or IDU (referred to as
manager)."
::= { gnAgnInterLinkEntry 5 }
gnAgnInterLinkAction OBJECT-TYPE
SYNTAX INTEGER { start(2), cancel(3), noAction(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls the interlink action operation. "
DEFVAL { noAction}
::= { gnAgnInterLinkEntry 6 }
gnAgnInterLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
gnInterLinkSessionError (1),
gnInterLinkSessionClearing (2),
gnInterLinkSessionSendBlock (3),
gnInterLinkSessiontimeout (4),
gnInterLinkSessionDone (5),
gnNoInterLinkSession (255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Inter-link session status "
::= { gnAgnInterLinkEntry 7 }
gnAgnInterLinkBlockCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of blocks sent in the current session."
::= { gnAgnInterLinkEntry 8 }
--//////////////////////////////////////
gnSoftwareVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnSoftwareVersionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the IDU, MUX, ODU & WS software versions;
local and remote."
::= { gnAgn 7 }
gnSoftwareVersionEntry OBJECT-TYPE
SYNTAX GnSoftwareVersionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the currently operating IDU, ODU and MUX software
versions."
INDEX { gnSoftwareVersionId }
::= { gnSoftwareVersionTable 1 }
GnSoftwareVersionEntry ::=
SEQUENCE {
gnSoftwareVersionId
INTEGER,
gnSoftwareVersionIDU
DisplayString,
gnSoftwareVersionMUX
DisplayString,
gnSoftwareVersionODU
DisplayString,
gnSoftwareVersionIDUPostResetVersion
DisplayString,
gnSoftwareVersionMUXPostResetVersion
DisplayString,
gnSoftwareVersionODUPostResetVersion
DisplayString,
gnSoftwareVersionMuxAlteraVer
DisplayString,
gnSoftwareIDCVersionControl
INTEGER,
gnSoftwareVersionWSAlteraVer
DisplayString,
gnSoftwareVersionWSPostResetVersion
DisplayString,
gnSoftwareVersionMrmcVer
DisplayString,
gnSoftwareVersionMrmcPostResetVer
DisplayString,
gnSoftwareVersionBootSoftVer
DisplayString,
gnSoftwareVersionBootFlashVer
DisplayString,
gnSoftwareVersionAcmLutVer
DisplayString,
gnSoftwareVersionAcmLutVerPostResetVer
DisplayString,
gnSoftwareVersionSfdVer
DisplayString
}
gnSoftwareVersionId OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID indicates which device is involved
in the specific row. The software table includes two rows,
one for the local radio and one for the remote radio."
::= { gnSoftwareVersionEntry 1 }
gnSoftwareVersionIDU OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the IDU software version."
::= { gnSoftwareVersionEntry 2 }
gnSoftwareVersionMUX OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the MUX software version."
::= { gnSoftwareVersionEntry 3 }
gnSoftwareVersionODU OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ODU software version."
::= { gnSoftwareVersionEntry 4 }
gnSoftwareVersionIDUPostResetVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the IDU post reset software version."
::= { gnSoftwareVersionEntry 5 }
gnSoftwareVersionMUXPostResetVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the MUX post reset software version."
::= { gnSoftwareVersionEntry 6 }
gnSoftwareVersionODUPostResetVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ODU post reset software version."
::= { gnSoftwareVersionEntry 7 }
gnSoftwareVersionMuxAlteraVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This string contains the MUX altera versions"
::= { gnSoftwareVersionEntry 8 }
gnSoftwareIDCVersionControl OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Points to the software version that will run on the next reset"
::= { gnSoftwareVersionEntry 9 }
gnSoftwareVersionWSAlteraVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the WS software version"
::= { gnSoftwareVersionEntry 10 }
gnSoftwareVersionWSPostResetVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the WS post reset software version"
::= { gnSoftwareVersionEntry 11 }
gnSoftwareVersionMrmcVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the MRMC filter table software version"
::= { gnSoftwareVersionEntry 12 }
gnSoftwareVersionMrmcPostResetVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the MRMC filter table post reset software version"
::= { gnSoftwareVersionEntry 13 }
gnSoftwareVersionBootSoftVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the BOOT software version"
::= { gnSoftwareVersionEntry 14 }
gnSoftwareVersionBootFlashVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the BOOT FLASH version"
::= { gnSoftwareVersionEntry 15 }
gnSoftwareVersionAcmLutVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ACM LUT software version"
::= { gnSoftwareVersionEntry 16 }
gnSoftwareVersionAcmLutVerPostResetVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ACM LUT post reset software version"
::= { gnSoftwareVersionEntry 17 }
gnSoftwareVersionSfdVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the SFD software version"
::= { gnSoftwareVersionEntry 18 }
--//////////////////////////////////////
gnAgnNTPCfg OBJECT IDENTIFIER ::= { gnAgn 8 }
gnAgnNTPCfgServerIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The IP address of the server from which
the current time is loaded."
::= { gnAgnNTPCfg 1 }
gnAgnNTPCfgOffsetFromUTC OBJECT-TYPE
SYNTAX INTEGER (-1439..1439)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The offset from Coordinated Universal Time (minutes).
Possible values: -1439..1439. "
DEFVAL {0}
::= { gnAgnNTPCfg 2 }
gnAgnNTPCfgSummerAdjOffset OBJECT-TYPE
SYNTAX INTEGER (-1439..1439)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The summer adjustment offset (minutes).
Possible values: -1439..1439. "
DEFVAL {0}
::= { gnAgnNTPCfg 3 }
gnAgnNTPCfgSummerAdjStart OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The summertime adjustment start.
In order to set this value:
1.Turn every parameter (month, day, hour, minute)
to hexadecimal.
2.Write them all together - from left to right.
3.Turn the accepted number to decimal basis.
For example:
in order to set 11:27:1:55 --> 11 = 0x0b, 27 = 0x1b,
1 = 0x01, 55 = 0x37 --> the 4 parameters together:
0x0b1b0137 = 186319159 (the last number is the one to set)."
::= { gnAgnNTPCfg 4 }
gnAgnNTPCfgSummerAdjEnd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The summertime adjustment end.
In order to set this value:
1.Turn every parameter (month, day, hour, minute)
to hexadecimal.
2.Write them all together - from left to right.
3.Turn the accepted number to decimal basis.
For example:
in order to set 11:27:1:55 --> 11 = 0x0b, 27 = 0x1b,
1 = 0x01, 55 = 0x37 --> the 4 parameters together:
0x0b1b0137 = 186319159 (the last number is the one to set)."
::= { gnAgnNTPCfg 5 }
gnAgnNTPCfgEnableAuth OBJECT-TYPE
SYNTAX INTEGER {
disabled(2),
des(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This value indicates if the Authentication is enabled. "
DEFVAL {disabled}
::= { gnAgnNTPCfg 6 }
gnAgnNTPCfgAuthSecretKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The authentication secret key (HEX).
Not relevant when authentication is disable. "
::= { gnAgnNTPCfg 7 }
gnAgnNTPCfgAuthPublicKey OBJECT-TYPE
SYNTAX Gauge
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The authentication public key is an integer number.
The valid values: 1-4294967295.
Not relevant when authentication is disable. "
::= { gnAgnNTPCfg 8 }
gnAgnNTPCfgUpdateInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The time interval between sending NTP requests
to the NTP server (minutes). Possible values: 1-65535. "
DEFVAL {10}
::= { gnAgnNTPCfg 9 }
gnAgnNTPCfgProtocolType OBJECT-TYPE
SYNTAX INTEGER {
ntp(2),
sntp(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
DEFVAL {ntp}
::= { gnAgnNTPCfg 10 }
gnAgnInBandMng OBJECT IDENTIFIER ::= { gnAgn 9 }
gnAgnInBandMngEthernetIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The ethernet IP of the gateway network element."
::= { gnAgnInBandMng 1 }
gnAgnInBandMngEthernetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The IP mask of the gateway network element."
::= { gnAgnInBandMng 2 }
gnAgnInBandMngPppIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The PPP IP address of the gateway network element."
::= { gnAgnInBandMng 3 }
gnAgnInBandMngPppMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The PPP IP mask of the gateway network element."
::= { gnAgnInBandMng 4 }
gnAgnInBandMngDefRoute OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The IP address of the default gateway/router
to the internet. "
::= { gnAgnInBandMng 5 }
gnAgnInBandMngEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Enable/Disable in-band management."
::= { gnAgnInBandMng 6 }
gnAgnInBandMngNetworkElementType OBJECT-TYPE
SYNTAX INTEGER {
networkElement(2),
gateway(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The element type of a single unit on the
inband network (Gateway or Network Element). "
::= { gnAgnInBandMng 7 }
gnAgnInBandMngRadioChannel OBJECT-TYPE
SYNTAX INTEGER {
dccr(2),
dccm(3),
mediaSpecific128k(4),
proprietary(5),
userChannel(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The channel the in-band-management goes over
(DCCR\DCCM\etc.). "
::= { gnAgnInBandMng 8 }
gnAgnInBandMngUnknownPackets OBJECT-TYPE
SYNTAX INTEGER {
transparent(2),
discard(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Select if unknown packets will be transparently
transmitted over the RING or discarded and dropped."
::= { gnAgnInBandMng 9 }
gnAgnInBandMngTTL OBJECT-TYPE
SYNTAX INTEGER (5..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Time To Live."
::= { gnAgnInBandMng 10 }
gnAgnInBandMngRingIpSubnet OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The IP subnet address of the ring."
::= { gnAgnInBandMng 11 }
gnAgnInBandMngRingIpMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The IP mask of the ring subnet address."
::= { gnAgnInBandMng 12 }
gnAgnInBandMngNetworkId OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Identification for single link path of
PPPoE over cross-networks. "
::= { gnAgnInBandMng 13 }
gnAgnInBandMngLineMode OBJECT-TYPE
SYNTAX INTEGER {
inbandFiber(2),
forcePPPoE(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Enable the user to force PPPoE mode
instead of DCCR line communication. "
::= { gnAgnInBandMng 14 }
gnAgnInBandMngFiberChannel OBJECT-TYPE
SYNTAX INTEGER {
dccr(2),
dccm(3),
-- mediaSpecific128k(4),
userChannel(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
DEFVAL { dccr}
::= { gnAgnInBandMng 15 }
gnAgnInBandMngTribChannel OBJECT-TYPE
SYNTAX INTEGER {
disable(2),
dccr(3),
dccm(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
DEFVAL { dccr}
::= { gnAgnInBandMng 16 }
gnAgnInBandMngXChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnAgnInBandMngXChannelEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the inband channels mapping."
::= { gnAgnInBandMng 17 }
gnAgnInBandMngXChannelEntry OBJECT-TYPE
SYNTAX GnAgnInBandMngXChannelEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the inband channel table.
This table contains a row for every channel (1..4).
First 3 physical channels are available in the 8 possible mapping options (on both carrier drawers).
An additional channel (4) is available on the IDC (PPPoE))."
INDEX { gnAgnInBandMngXChannelId }
::= { gnAgnInBandMngXChannelTable 1 }
GnAgnInBandMngXChannelEntry ::=
SEQUENCE {
gnAgnInBandMngXChannelId
INTEGER,
gnAgnInBandMngXChannelIfIndex
INTEGER,
gnAgnInBandMngXChannelType
INTEGER,
gnAgnInBandMngXChannelState
INTEGER,
gnAgnInBandMngXChannelNeighborIP
IpAddress,
gnAgnInBandMngXChannelStatus
INTEGER
}
gnAgnInBandMngXChannelId OBJECT-TYPE
SYNTAX INTEGER
{
channel1(1),
channel2(2),
channel3(3),
channel4(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The channel Id"
::= { gnAgnInBandMngXChannelEntry 1 }
gnAgnInBandMngXChannelIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ifIndex of the interface that is mapped to this channel"
::= { gnAgnInBandMngXChannelEntry 2 }
gnAgnInBandMngXChannelType OBJECT-TYPE
SYNTAX INTEGER
{
proprietary(2),
dccr(3),
dccm(4),
mediaspecific(5),
pppoe(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of channel the in-band-management goes over.
Default value for channels 1 and 3 in the carrier drawers is Proprietary.
Channel 2 not allowed to be Proprietary.
In protection the ch_type of ch#3 can not be modified
Channel 4 must be PPPoE"
::= { gnAgnInBandMngXChannelEntry 3 }
gnAgnInBandMngXChannelState OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable the in band channel"
::= { gnAgnInBandMngXChannelEntry 4 }
gnAgnInBandMngXChannelNeighborIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The PPP IP address of the gateway network element."
::= { gnAgnInBandMngXChannelEntry 5 }
gnAgnInBandMngXChannelStatus OBJECT-TYPE
SYNTAX INTEGER {
up(2),
down(3),
closed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This MIB parameter defines the In-band PPP connection status.
If the MIB value is up the PPP connection is up and running
If the MIB value is down the PPP connection is down and is in initialization state.
(Trying to establish a connection)
If the MIB value is closed the PPP connection is down and is not trying open a connection."
::= { gnAgnInBandMngXChannelEntry 6 }
gnAgnInBandMngXEnableInbandChannels OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This configuration enables/disables the in-band channels: 1-4.
The LSB represent channel 1, the 2nd bit channel 2, etc.
If a bit is on (1) it's channel is enabled.
Example: if channels 2 & 4 are enabled and channels 1 & 3 are disabled, then
the binary value is 1010, so the MIB value (decimal integer) will be 10."
DEFVAL { 0 }
::= { gnAgnInBandMng 18 }
gnAgnInBandMngMainGNEInterface OBJECT-TYPE
SYNTAX INTEGER {
default(2),
channel1(3),
channel2(4),
channel3(5),
channel4(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"determines the primary GNE channel.
Default means fixed channel prioritizing, in the following order (from first to last):
Right Carrier Radio interface, [STM-1] Line interface on either Left or Right Carrier,
Left Carrier Radio interface and PPPoE interface."
DEFVAL { 2 }
::= { gnAgnInBandMng 19 }
--//////////////////////////////////////
gnNeighborIP OBJECT IDENTIFIER ::= { gnAgn 10 }
gnNeighborInBandTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnNeighborInBandEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the IP addresses of the units that are connected Inband."
::= { gnNeighborIP 1 }
gnNeighborInBandEntry OBJECT-TYPE
SYNTAX GnNeighborInBandEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the IP addresses of the units that are connected Inband.
This table contains a row for every interface which type is logically connected.
for example regenerator which is connected in band has two neighbors: the first (index 1)
the remote radio unit and the second the remote fiber neighbor (index 2)."
INDEX { ifIndex }
::= { gnNeighborInBandTable 1 }
GnNeighborInBandEntry ::=
SEQUENCE {
gnNeighborInBandIP
IpAddress,
gnNeighborInBandStatus
INTEGER
}
gnNeighborInBandIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The PPP IP address of the gateway network element."
::= { gnNeighborInBandEntry 1 }
gnNeighborInBandStatus OBJECT-TYPE
SYNTAX INTEGER {
up(2),
down(3),
closed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This MIB parameter defines the In-band PPP connection status.
If the MIB value is up the PPP connection is up and running
If the MIB value is down the PPP connection is down and is in initialization state.
(Trying to establish a connection)
If the MIB value is closed the PPP connection is down and is not trying open a connection."
::= { gnNeighborInBandEntry 2 }
gnNeighborMateIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The Protection Mate IP address."
::= { gnNeighborIP 2 }
gnNeighborRemoteRadioIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The IP address of the Radio Remote IDU."
::= { gnNeighborIP 3 }
gnNeighborInBandXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnNeighborInBandXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the IP addresses of the units that are connected Inband."
::= { gnNeighborIP 4 }
gnNeighborInBandXEntry OBJECT-TYPE
SYNTAX GnNeighborInBandXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the IP addresses of the units that are connected Inband.
This table contains a row for every interface which type is logically connected.
for example regenerator which is connected in band has two neighbors: the first (index 1)
the remote radio unit and the second the remote fiber neighbor (index 2)."
INDEX { gnNeighborInBandXId }
::= { gnNeighborInBandXTable 1 }
GnNeighborInBandXEntry ::=
SEQUENCE {
gnNeighborInBandXId
INTEGER,
gnNeighborInBandXIP
IpAddress
}
gnNeighborInBandXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnNeighborInBandXEntry 1 }
gnNeighborInBandXIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The PPP IP address of the gateway network element."
::= { gnNeighborInBandXEntry 2 }
gnNeighborIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnNeighborIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table shows the Neighbor IP for each STM connection."
::= { gnNeighborIP 5 }
gnNeighborIpEntry OBJECT-TYPE
SYNTAX GnNeighborIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"."
INDEX { ifIndex }
::= { gnNeighborIpTable 1 }
GnNeighborIpEntry ::=
SEQUENCE {
gnNeighborIpDetectMode
INTEGER,
gnNeighborIpAddress
IpAddress,
gnNeighborIpRemoteIfIndex
INTEGER,
gnNeighborIpRemoteType
INTEGER
}
gnNeighborIpDetectMode OBJECT-TYPE
SYNTAX INTEGER {
disable(2),
manual(3),
auto(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Neighbor detect can be done automatically or to be manually insreted.
Disable marks that the IP Detect is not used."
::= { gnNeighborIpEntry 1 }
gnNeighborIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The neighbor IP address."
::= { gnNeighborIpEntry 2 }
gnNeighborIpRemoteIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The If index of the neighbor IP address connected to the current If Index."
::= { gnNeighborIpEntry 3 }
gnNeighborIpRemoteType OBJECT-TYPE
SYNTAX INTEGER {
regenerator(1),
access(2),
adm(3),
unit1500p(4),
admline2line(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Type of the neighbor."
::= { gnNeighborIpEntry 4 }
----------------
gnAgnSNMPCfg OBJECT IDENTIFIER ::= { gnAgn 11 }
gnAgnSNMPCfgTrapCommunity OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(12))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { gnAgnSNMPCfg 1 }
gnAgnSNMPCfgReadCommunity OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(12))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { gnAgnSNMPCfg 2 }
gnAgnSNMPCfgWriteCommunity OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(12))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { gnAgnSNMPCfg 3 }
gnAgnPrvt OBJECT IDENTIFIER ::= { gnAgn 12 }
gnAgnPrvtCmd OBJECT-TYPE
SYNTAX INTEGER {
noOperation(2),
cNV(3),
cNVBtr(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" ."
DEFVAL { noOperation }
::= { gnAgnPrvt 1 }
gnAgnPrvtCmdStat OBJECT-TYPE
SYNTAX INTEGER {
ready(2),
cNVPass(3),
cNVFail(4),
cNVBtrPass(5),
cNVBtrFail(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" ."
DEFVAL { ready }
::= { gnAgnPrvt 2 }
gnSoftwareDrawerVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnSoftwareDrawerVersionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the IDU, MUX & ODU software versions;
local and remote."
::= { gnAgn 13 }
gnSoftwareDrawerVersionEntry OBJECT-TYPE
SYNTAX GnSoftwareDrawerVersionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the currently operating IDU, ODU and MUX software
versions."
INDEX { gnSoftwareDrawerId }
::= { gnSoftwareDrawerVersionTable 1 }
GnSoftwareDrawerVersionEntry ::=
SEQUENCE {
gnSoftwareDrawerId
INTEGER,
gnSoftwareDrawerVersionMUX
DisplayString,
gnSoftwareDrawerVersionMUXPostResetVersion
DisplayString,
gnSoftwareDrawerVersionODU
DisplayString,
gnSoftwareDrawerVersionODUPostResetVersion
DisplayString,
gnSoftwareDrawerVersionModemFile
DisplayString,
gnSoftwareDrawerVersionModemFilePostResetVersion
DisplayString,
gnSoftwareDrawerVersionModemScript
DisplayString,
gnSoftwareDrawerVersionModemScriptPostResetVersion
DisplayString,
gnSoftwareDrawerVersionRfuFpgaVersion
DisplayString
}
gnSoftwareDrawerId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID indicates which Drawer is involved
in the specific row. "
::= { gnSoftwareDrawerVersionEntry 1 }
gnSoftwareDrawerVersionMUX OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the MUX software version."
::= { gnSoftwareDrawerVersionEntry 2 }
gnSoftwareDrawerVersionMUXPostResetVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ODU software version."
::= { gnSoftwareDrawerVersionEntry 3 }
gnSoftwareDrawerVersionODU OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the MUX post reset software version."
::= { gnSoftwareDrawerVersionEntry 4 }
gnSoftwareDrawerVersionODUPostResetVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the MUX post reset software version."
::= { gnSoftwareDrawerVersionEntry 5 }
gnSoftwareDrawerVersionModemFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Modem software version."
::= { gnSoftwareDrawerVersionEntry 6 }
gnSoftwareDrawerVersionModemFilePostResetVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Modem post reset software version."
::= { gnSoftwareDrawerVersionEntry 7 }
gnSoftwareDrawerVersionModemScript OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Modem software version."
::= { gnSoftwareDrawerVersionEntry 8 }
gnSoftwareDrawerVersionModemScriptPostResetVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Modem post reset software version."
::= { gnSoftwareDrawerVersionEntry 9 }
gnSoftwareDrawerVersionRfuFpgaVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Rfu Fpga software version."
::= { gnSoftwareDrawerVersionEntry 10 }
-- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
gnAgnCurrentAlarm OBJECT IDENTIFIER ::= { gnAgn 14 }
gnAgnCurrentAlarmLastChange OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter initialized with random number after resest, and incremented on each change in the gnAgnCurrentAlarmTable
(either add or remove of an entery)."
::= { gnAgnCurrentAlarm 1 }
gnAgnCurrentAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnAgnCurrentAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table includes the currently open alarm (when a RAISED trap is
sent, an alarm is added to the table, when a CLEAR trap is sent,
the alarm is removed."
::= { gnAgnCurrentAlarm 2 }
gnAgnCurrentAlarmEntry OBJECT-TYPE
SYNTAX GnAgnCurrentAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the info of a currently RAISED trap."
INDEX { gnAgnCurrentAlarmCounter }
::= { gnAgnCurrentAlarmTable 1 }
GnAgnCurrentAlarmEntry ::=
SEQUENCE {
gnAgnCurrentAlarmCounter
INTEGER,
gnAgnCurrentAlarmSeverity
INTEGER,
gnAgnCurrentAlarmId
INTEGER,
gnAgnCurrentAlarmIfIndex
INTEGER,
gnAgnCurrentAlarmOrigin
INTEGER,
gnAgnCurrentAlarmUnit
INTEGER,
gnAgnCurrentAlarmTrapID
INTEGER,
gnAgnCurrentAlarmTimeT
INTEGER,
gnAgnCurrentAlarmText
DisplayString
}
gnAgnCurrentAlarmCounter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A running counter of open alarm, the counter is incremented on every new RAISED trap.
It is cleared after reset. This counter is (optionaly) attached to each trap."
::= { gnAgnCurrentAlarmEntry 1 }
gnAgnCurrentAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER
{
event (1),
warning (3),
minor (7),
major (15),
critical (31)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current Alarm severity"
::= { gnAgnCurrentAlarmEntry 2 }
gnAgnCurrentAlarmId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm Identifier (contains alarm type and interface). Same AlarmId for rasie and clear alarms."
::= { gnAgnCurrentAlarmEntry 3 }
gnAgnCurrentAlarmIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interface Index where the alarm occurred, alarms that are
not associated with specific interface will have the following value:
For IDC related alarms the value is: 65001
For drawer1 related alarms the value is: 65003
For drawer2 related alarms the value is: 65004
If Alarm's origin is bigger than 256, it will be 65000 + the origin"
::= { gnAgnCurrentAlarmEntry 4 }
gnAgnCurrentAlarmOrigin OBJECT-TYPE
SYNTAX INTEGER {
interfaces(1),
idc(2),
drawer1(3),
drawer2(4),
unKnown(5),
tIdc1(257),
tIdc2(258),
tIdc3(259),
tIdc4(260),
tIdc5(261),
tIdc6(262),
tIdc7(263),
tIdc8(264),
tIdc9(265),
tDrawer1(513),
tDrawer2(514),
tDrawer3(515),
tDrawer4(516),
tDrawer5(517),
tDrawer6(518),
tDrawer7(519),
tDrawer8(520),
tDrawer9(521),
tDrawer10(522),
tDrawer11(523),
tDrawer12(524),
tDrawer13(525),
tDrawer14(526),
tDrawer15(527),
tXC1(769),
tXC2(770),
tXC3(771),
tXC4(772),
tXC5(773),
tXC6(774)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The origin drawer of the alarm (if applicable, otherwise it will be idc(2))."
::= {gnAgnCurrentAlarmEntry 5}
gnAgnCurrentAlarmUnit OBJECT-TYPE
SYNTAX INTEGER {
idc(2),
odu(3),
mux(4),
modem(5),
drawer(6),
unKnown(7),
xc(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit of the alarm."
::= {gnAgnCurrentAlarmEntry 6}
gnAgnCurrentAlarmTrapID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the RAISED trap that was sent when this alarm was raised."
::= { gnAgnCurrentAlarmEntry 7 }
gnAgnCurrentAlarmTimeT OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Timestamp of this alarm, this number is the seconds from midnight 1.1.1970."
::= { gnAgnCurrentAlarmEntry 8 }
gnAgnCurrentAlarmText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm display text (same as the text in the sent trap)."
::= { gnAgnCurrentAlarmEntry 9}
gnNMS OBJECT IDENTIFIER ::= { gnAgn 15 }
--//////////////////////////////////////
gnApplicFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnApplicFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the application file list."
::= { gnAgn 16 }
gnApplicFileEntry OBJECT-TYPE
SYNTAX GnApplicFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the application file list."
INDEX { gnApplicFileId }
::= { gnApplicFileTable 1 }
GnApplicFileEntry ::=
SEQUENCE {
gnApplicFileId
INTEGER,
gnApplicFileName
DisplayString,
gnApplicFileVersion
DisplayString,
gnApplicFileCreateDate
OCTET STRING,
gnApplicFileDownloadDate
OCTET STRING,
gnApplicFileType
INTEGER,
gnApplicFileSubType
DisplayString,
gnApplicFileFirmware
INTEGER,
gnApplicFileGeneralPurpose
INTEGER,
gnApplicFileSize
INTEGER,
gnApplicFileCompressed
INTEGER,
gnApplicFileDssSupport
INTEGER,
gnApplicFileCrcSupport
INTEGER
}
gnApplicFileId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID indicates which device is involved
in the specific row. The application file table includes two rows,
one for the local radio and one for the remote radio."
::= { gnApplicFileEntry 1 }
gnApplicFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the application file name."
::= { gnApplicFileEntry 2 }
gnApplicFileVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the application file version."
::= { gnApplicFileEntry 3 }
gnApplicFileCreateDate OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies the application file download date
Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
A date-time specification.
field octets contents range
----- ------ -------- -----
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
8 9 direction from UTC '+' / '-'
9 10 hours from UTC 0..11
10 11 minutes from UTC 0..59
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT
would be displayed as: 07 c8 05 1a 0d 1e 0f 00
( 1992 -5 -26,13:30:15 )
Note that if only local time is known, then timezone
information (fields 8-10) is not present."
::= { gnApplicFileEntry 4 }
gnApplicFileDownloadDate OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies the application file download date
Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
A date-time specification.
field octets contents range
----- ------ -------- -----
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
8 9 direction from UTC '+' / '-'
9 10 hours from UTC 0..11
10 11 minutes from UTC 0..59
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT
would be displayed as: 07 c8 05 1a 0d 1e 0f 00
( 1992 -5 -26,13:30:15 )
Note that if only local time is known, then timezone
information (fields 8-10) is not present."
::= { gnApplicFileEntry 5 }
gnApplicFileType OBJECT-TYPE
SYNTAX INTEGER {
idc(1),
mux(2),
odu(3),
modem(4),
boot(5),
modemConfig(6),
wayside(7),
bootRom(8),
rfuFpga(9),
rfuConfig(10),
mrmcTable(11),
xc(12),
xcErrorgen(13),
aAux(14),
license(15),
frameConfigTable(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the application file type."
::= { gnApplicFileEntry 6 }
gnApplicFileSubType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the application file sub type."
::= { gnApplicFileEntry 7 }
gnApplicFileFirmware OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the application file firmware."
::= { gnApplicFileEntry 8 }
gnApplicFileGeneralPurpose OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the application file General Purpose."
::= { gnApplicFileEntry 9 }
gnApplicFileSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the application file size in bytes."
::= { gnApplicFileEntry 10 }
gnApplicFileCompressed OBJECT-TYPE
SYNTAX INTEGER
{
yes(2),
no(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is indicate the application file compress status."
::= { gnApplicFileEntry 11 }
gnApplicFileDssSupport OBJECT-TYPE
SYNTAX INTEGER
{
yes(2),
no(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is indicate the application file DSS support."
::= { gnApplicFileEntry 12 }
gnApplicFileCrcSupport OBJECT-TYPE
SYNTAX INTEGER
{
yes(2),
no(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is indicate the application file CRC support."
::= { gnApplicFileEntry 13 }
--//////////////////////////////////////
gnDiskCapacityData OBJECT IDENTIFIER ::= { gnAgn 17 }
gnDiskUsedspace OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID indicates Disk Used space."
::= { gnDiskCapacityData 1 }
gnDiskFreespace OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID indicates Disk Free space."
::= { gnDiskCapacityData 2 }
--//////////////////////////////////////
gnUnits OBJECT IDENTIFIER ::= { ceragon 3 }
gnODU OBJECT IDENTIFIER ::= { gnUnits 1 }
gnOduCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the Outdoor part
of the system."
::= { gnODU 1 }
gnOduCfgEntry OBJECT-TYPE
SYNTAX GnOduCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the ODU Configuration Table. This table
contains two rows, indexed by ifIndex= 1 for local ODU and
ifIndex = 101 for remote ODU."
INDEX { ifIndex }
::= { gnOduCfgTable 1 }
GnOduCfgEntry ::=
SEQUENCE {
gnOduCfgTransmitterFrequency
INTEGER,
gnOduCfgRLPerfMonThresh1
INTEGER,
gnOduCfgRLPerfMonThresh2
INTEGER,
gnOduCfgATPCStatus
INTEGER,
gnOduCfgMUTEStatus
INTEGER,
gnOduCfgAntennaType
INTEGER,
gnOduCfgTransmitLevel
INTEGER,
gnOduCfgRealTxFreqNumber
INTEGER,
gnOduCfgRealRxFreqNumber
INTEGER,
gnOduCfgMinTxFreqNumber
INTEGER,
gnOduCfgMaxTxFreqNumber
INTEGER,
gnOduCfgMaxTxLevel
INTEGER,
gnOduCfgRefRsl
INTEGER,
gnOduCfgForceRmtMuteTx
INTEGER,
gnOduCfgForceRmtMaxTx
INTEGER,
gnOduCfgTLPerfMonThresh1
INTEGER,
gnOduCfgMinRxFreqNumber
INTEGER,
gnOduCfgMaxRxFreqNumber
INTEGER,
gnOduCfgOduLoopSupport
INTEGER,
gnOduCfgOduModel
INTEGER,
gnOduCfgFreqPlanStandard
DisplayString,
gnOduCfgFreqDevider
INTEGER
}
gnOduCfgTransmitterFrequency OBJECT-TYPE
SYNTAX INTEGER (0..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates the radio TX channel number.
WRITE will change the LOCAL side only.
Not all radios will support TX frequency change via channel numbers."
DEFVAL { 1}
::= { gnOduCfgEntry 1 }
gnOduCfgRLPerfMonThresh1 OBJECT-TYPE
SYNTAX INTEGER (-75..-15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the Received Level (RL) exceeds this threshold a
performance monitoring RL1 counter increments."
DEFVAL { -50}
::= { gnOduCfgEntry 2}
gnOduCfgRLPerfMonThresh2 OBJECT-TYPE
SYNTAX INTEGER (-75..-15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the Received Level (RL) exceeds this threshold a
performance monitoring RL2 counter increments."
DEFVAL { -70}
::= { gnOduCfgEntry 3}
gnOduCfgATPCStatus OBJECT-TYPE
SYNTAX INTEGER { on(2), off(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates if the ATPC option is enabled or disabled."
DEFVAL { on}
::= { gnOduCfgEntry 4}
gnOduCfgMUTEStatus OBJECT-TYPE
SYNTAX INTEGER { on(2), off(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates if transmitter will be in mute state.
(Mute on -> don't transmit) "
DEFVAL { off}
::= { gnOduCfgEntry 5 }
gnOduCfgAntennaType OBJECT-TYPE
SYNTAX INTEGER { oneFoot(2), twoFeet(3), threeFeet(4), fourFeet(5),
sixFeet(6) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates the size of the antenna used
in the ODU. This attribute will not auto-detect the antenna size.
It is used for the unfaded RSL calculation feature included in
the element manager."
DEFVAL { oneFoot }
::= { gnOduCfgEntry 6 }
gnOduCfgTransmitLevel OBJECT-TYPE
SYNTAX INTEGER (-50..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the transmitter output power level of the signal
transmitted by the radios, displayed in DBM. "
::= { gnOduCfgEntry 7 }
gnOduCfgRealTxFreqNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identifies the RF Tx frequency. For 6, 7 and 8 bands the Tx frequency
resolution is in kHz, for other bands the resolution is in 10kHz.
If the Tx frequency value is over 4000000 than the band is identified
as 6, 7 or 8G band."
::= { gnOduCfgEntry 8 }
gnOduCfgRealRxFreqNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identifies the RF Rx frequency. For 6, 7 and 8 bands the Rx frequency
resolution is in kHz, for other bands the resolution is in 10kHz.
If the Rx frequency value is over 4000000 than the band is identified
as 6, 7 or 8G band."
::= { gnOduCfgEntry 9}
gnOduCfgMinTxFreqNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This the Minimum TX frequency that the ODU can receive - Used by the
management station."
::= { gnOduCfgEntry 10 }
gnOduCfgMaxTxFreqNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This the Maximum TX frequency that the ODU can receive - Used by the
management station."
::= { gnOduCfgEntry 11}
gnOduCfgMaxTxLevel OBJECT-TYPE
SYNTAX INTEGER (0..99)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the theoretical maximum level that this ODU unit
can transmit."
::= { gnOduCfgEntry 12 }
gnOduCfgRefRsl OBJECT-TYPE
SYNTAX INTEGER (-70..-30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the received level reference, applicable when utilizing ATPC mode;
displayed in dBm."
::= { gnOduCfgEntry 13 }
gnOduCfgForceRmtMuteTx OBJECT-TYPE
SYNTAX INTEGER { on(2), off(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When on, this parameter force the transmitter to be in mute state.
(Mute on -> don't transmit) "
DEFVAL { off }
::= { gnOduCfgEntry 14 }
gnOduCfgForceRmtMaxTx OBJECT-TYPE
SYNTAX INTEGER (-50..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter force the transmitter output power level of the signal
transmitted by the radio. "
::= { gnOduCfgEntry 15 }
gnOduCfgTLPerfMonThresh1 OBJECT-TYPE
SYNTAX INTEGER (-10..25)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the Transmitted Level (TL) exceeds this threshold a
performance monitoring TL1 counter increments."
DEFVAL { 25 }
::= { gnOduCfgEntry 16}
gnOduCfgMinRxFreqNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This the Minimum RX frequency that the ODU can receive - Used by the
management station."
::= { gnOduCfgEntry 17 }
gnOduCfgMaxRxFreqNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This the Maximum RX frequency that the ODU can receive - Used by the
management station."
::= { gnOduCfgEntry 18}
gnOduCfgOduLoopSupport OBJECT-TYPE
SYNTAX INTEGER {
notSupported(2),
supported(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for loopback support by the connected ODU."
::= { gnOduCfgEntry 19}
gnOduCfgOduModel OBJECT-TYPE
SYNTAX INTEGER {
unknown(2),
v2(3), --phos
v1(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { gnOduCfgEntry 20}
gnOduCfgFreqPlanStandard OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..45))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the NMS use."
::= { gnOduCfgEntry 21}
gnOduCfgFreqDevider OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number with which we should divide the MIB Freq value to get to the actual Freq (100 or 1000) "
::= { gnOduCfgEntry 22}
-- RO parameters described the state of the ODU.
gnOduStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the status of the Outdoor unit
of the system."
::= { gnODU 2 }
gnOduStatusEntry OBJECT-TYPE
SYNTAX GnOduStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the ODU Status Table. This table
contains two rows, indexed by ifIndex= 1 for local ODU and
ifIndex = 101 for remote ODU."
INDEX { ifIndex }
::= { gnOduStatusTable 1 }
GnOduStatusEntry ::=
SEQUENCE {
gnOduStatusCelsiusTemp
INTEGER,
gnOduStatusFahrenheitTemp
INTEGER,
gnOduStatusTransmitLevel
INTEGER,
gnOduStatusReceiveLevel
INTEGER,
gnOduStatusSynthesizerVCOLock
OCTET STRING,
gnOduStatusPowerSupply
OCTET STRING,
gnOduStatusClearLoopTimer
INTEGER
}
gnOduStatusCelsiusTemp OBJECT-TYPE
SYNTAX INTEGER (-50..80)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the temperature of the ODU in degrees Celsius."
::= { gnOduStatusEntry 1 }
gnOduStatusFahrenheitTemp OBJECT-TYPE
SYNTAX INTEGER (-58..176)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the temperature of the ODU in degrees Fahrenheit."
::= { gnOduStatusEntry 2 }
gnOduStatusTransmitLevel OBJECT-TYPE
SYNTAX INTEGER (-99..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the transmit level of the signal transmitted by the radios
transmitter, displayed in DBM."
::= { gnOduStatusEntry 3 }
gnOduStatusReceiveLevel OBJECT-TYPE
SYNTAX INTEGER (-99..-15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the receive level of the signal transmitted by the radios
transmitter, displayed in DBM."
::= { gnOduStatusEntry 4}
gnOduStatusSynthesizerVCOLock OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This octet represents the ODU status as follows (bit 1, LSB):
bit 1 on = TX IF synthesizer
bit 2 on = RX IF synthesizer
bit 3 on = Xband synthesizer
bit 4 on = History TX IF synthesizer
bit 5 on = History RX IF synthesizer
bit 6 on = History Xband synthesizer "
::= { gnOduStatusEntry 5}
gnOduStatusPowerSupply OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This octet represents the status of the power
supplies of the ODU:
bit 1 on = +5V faulty
bit 2 on = +8V faulty
bit 3 on = +12V faulty
bit 4 on = -12V faulty."
::= { gnOduStatusEntry 6}
gnOduStatusClearLoopTimer OBJECT-TYPE
SYNTAX INTEGER (0..1440)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the remaining time (in minutes)
till the relevant odu loopback timer will be expired.
when starting a loopback and the value of gnGenCfgClearLoopTimeout is x,
the gnOduStatusClearLoopTimer will be also x, after one minute it will be x-1, etc."
::= { gnOduStatusEntry 7}
-- This part of the MIB deals with the performance monitoring
-- of the ODU part of the system.
gnOduMonitor OBJECT IDENTIFIER ::= { gnODU 3 }
-- This part is built according the habits in the telcos/datacom community.
-- There are three tables:
-- gnOduMonCurrTable that keeps the counters of the current 15 min interval.
-- gnOduMonIntervalTable that keeps the counters of the past 96 intervals.
-- gnOduMonDayTable that keeps the counters of the past 30 days.
gnOduMonCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of the current 15 min interval."
::= { gnOduMonitor 1 }
gnOduMonCurrEntry OBJECT-TYPE
SYNTAX GnOduMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Current Interval Table. This table
contains two rows, indexed by ifIndex= 1 for local ODU and
ifIndex = 101 for remote ODU."
INDEX { ifIndex }
::= { gnOduMonCurrTable 1 }
GnOduMonCurrEntry ::=
SEQUENCE {
gnOduMonCurrMinRL
INTEGER,
gnOduMonCurrMaxRL
INTEGER,
gnOduMonCurrTLThresh1Exceed
Counter,
gnOduMonCurrRLThresh1Exceed
Counter,
gnOduMonCurrRLThresh2Exceed
Counter,
gnOduMonCurrDayMinRL
INTEGER,
gnOduMonCurrDayMaxRL
INTEGER,
gnOduMonCurrDayTLThresh1Exceed
Counter,
gnOduMonCurrDayRLThresh1Exceed
Counter,
gnOduMonCurrDayRLThresh2Exceed
Counter,
gnOduMonCurrMinTL
INTEGER,
gnOduMonCurrMaxTL
INTEGER,
gnOduMonCurrDayMinTL
INTEGER,
gnOduMonCurrDayMaxTL
INTEGER
}
gnOduMonCurrMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum received signal level (RL) in the current 15 minute interval.
(in DBM) "
::= { gnOduMonCurrEntry 1 }
gnOduMonCurrMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum received signal level (RL) in the current 15 minute interval.
(in DBM). "
::= { gnOduMonCurrEntry 2 }
gnOduMonCurrTLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds TL exceeded the TL1
threshold in the last 15 minutes."
::= { gnOduMonCurrEntry 3 }
gnOduMonCurrRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1
threshold in the last 15 minutes."
::= { gnOduMonCurrEntry 4 }
gnOduMonCurrRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2
threshold in the last 15 minutes."
::= { gnOduMonCurrEntry 5 }
gnOduMonCurrDayMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Receive Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrEntry 6}
gnOduMonCurrDayMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Receive Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrEntry 7}
gnOduMonCurrDayTLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds TL exceeded the TL1 threshold
in the last 24 hours."
::= { gnOduMonCurrEntry 8}
gnOduMonCurrDayRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1 threshold
in the last 24 hours."
::= { gnOduMonCurrEntry 9 }
gnOduMonCurrDayRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2 threshold
in the last 24 hours."
::= { gnOduMonCurrEntry 10 }
gnOduMonCurrMinTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum transmitted signal level (TL) in the current 15 minute interval.
(in DBM) "
::= { gnOduMonCurrEntry 11 }
gnOduMonCurrMaxTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum transmitted signal level (TL) in the current 15 minute interval.
(in DBM). "
::= { gnOduMonCurrEntry 12 }
gnOduMonCurrDayMinTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Transmitted Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrEntry 13}
gnOduMonCurrDayMaxTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Transmitted Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrEntry 14}
gnOduMonIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of the 96 last intervals of 15 min."
::= { gnOduMonitor 2 }
gnOduMonIntervalEntry OBJECT-TYPE
SYNTAX GnOduMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Interval Table. This table
is indexed by ifIndex= 1 for local ODU and
ifIndex = 101 for remote ODU and by interval idx"
INDEX { ifIndex, gnOduMonIntervalIdx }
::= { gnOduMonIntervalTable 1 }
GnOduMonIntervalEntry ::=
SEQUENCE {
gnOduMonIntervalIdx
INTEGER,
gnOduMonIntervalMinRL
INTEGER,
gnOduMonIntervalMaxRL
INTEGER,
gnOduMonIntervalTLThresh1Exceed
Counter,
gnOduMonIntervalEvent
OCTET STRING,
gnOduMonIntervalRLThresh1Exceed
Counter,
gnOduMonIntervalRLThresh2Exceed
Counter,
gnOduMonIntervalMinTL
INTEGER,
gnOduMonIntervalMaxTL
INTEGER
}
gnOduMonIntervalIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interval number to which this row is related. "
::= { gnOduMonIntervalEntry 1 }
gnOduMonIntervalMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum RL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalEntry 2 }
gnOduMonIntervalMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum RL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalEntry 3 }
gnOduMonIntervalTLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds TL exceeded the TL1
threshold in a 15 minutes interval."
::= { gnOduMonIntervalEntry 4 }
gnOduMonIntervalEvent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Events
bit 1 = CommDisc.
bit 2 = CommCon
bit 3 = ATPC2Max.
bit 4 = ATPC2Norm.
Included for future development, not currently supported."
::= { gnOduMonIntervalEntry 5 }
gnOduMonIntervalRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1
threshold in a 15 minutes interval."
::= { gnOduMonIntervalEntry 6 }
gnOduMonIntervalRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2
threshold in a 15 minutes interval."
::= { gnOduMonIntervalEntry 7 }
gnOduMonIntervalMinTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum TL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalEntry 8 }
gnOduMonIntervalMaxTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum TL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalEntry 9 }
gnOduMonDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of 96 intervals of 15 min."
::= { gnOduMonitor 3 }
gnOduMonDayEntry OBJECT-TYPE
SYNTAX GnOduMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Days Table. This table
is indexed by ifIndex= 1 for local ODU and
ifIndex = 101 for remote ODU and by day idx.
gnOduMonDayIdx = 1 is one day from now,
gnOduMonDayIdx = 2 is two days from now, and so on..."
INDEX { ifIndex, gnOduMonDayIdx }
::= { gnOduMonDayTable 1 }
GnOduMonDayEntry ::=
SEQUENCE {
gnOduMonDayIdx
INTEGER,
gnOduMonDayMinRL
INTEGER,
gnOduMonDayMaxRL
INTEGER,
gnOduMonDayTLThresh1Exceed
Counter,
gnOduMonDayRLThresh1Exceed
Counter,
gnOduMonDayRLThresh2Exceed
Counter,
gnOduMonDayMinTL
INTEGER,
gnOduMonDayMaxTL
INTEGER
}
gnOduMonDayIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interval number to which this row is related. "
::= { gnOduMonDayEntry 1 }
gnOduMonDayMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Receive Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayEntry 2}
gnOduMonDayMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Receive Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayEntry 3}
gnOduMonDayTLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds TL exceeded the TL1 threshold
in a 24 hour interval."
::= { gnOduMonDayEntry 4}
gnOduMonDayRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1 threshold
in a 24 hour interval."
::= { gnOduMonDayEntry 5}
gnOduMonDayRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2 threshold
in a 24 hour interval."
::= { gnOduMonDayEntry 6}
gnOduMonDayMinTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Transmit Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayEntry 7}
gnOduMonDayMaxTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Transmit Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayEntry 8}
gnOduCfgXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduCfgXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the Outdoor part
of the system."
::= { gnODU 4 }
gnOduCfgXEntry OBJECT-TYPE
SYNTAX GnOduCfgXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the ODU Configuration Table. This table
contains two rows, indexed by gnOduCfgXId= 3 for drawer1 ODU and
gnOduCfgXId = 4 for drawer2 ODU."
INDEX { gnOduCfgXId }
::= { gnOduCfgXTable 1 }
GnOduCfgXEntry ::=
SEQUENCE {
gnOduCfgXId
INTEGER,
gnOduCfgXTxFreqNumLocalRemote
INTEGER,
gnOduCfgXRLPerfMonThresh1
INTEGER,
gnOduCfgXRLPerfMonThresh2
INTEGER,
gnOduCfgXATPCStatus
INTEGER,
gnOduCfgXMUTEStatus
INTEGER,
gnOduCfgXAntennaType
INTEGER,
gnOduCfgXTransmitLevel
INTEGER,
gnOduCfgXRealTxFreqNumber
INTEGER,
gnOduCfgXRealRxFreqNumber
INTEGER,
gnOduCfgXMinTxFreqNumber
INTEGER,
gnOduCfgXMaxTxFreqNumber
INTEGER,
gnOduCfgXMaxTxLevel
INTEGER,
gnOduCfgXRefRsl
INTEGER,
gnOduCfgXForceRmtMuteTx
INTEGER,
gnOduCfgXForceRmtMaxTx
INTEGER,
gnOduCfgXTLPerfMonThresh1
INTEGER,
gnOduCfgXOperation
INTEGER,
gnOduCfgXODUSerialNumber
DisplayString,
gnOduCfgXChannelBandwidth
INTEGER,
gnOduCfgXMinRxFreqNumber
INTEGER,
gnOduCfgXMaxRxFreqNumber
INTEGER,
gnOduCfgXRxFreqNumLocalRemote
INTEGER,
gnOduCfgXOduLoopSupport
INTEGER,
gnOduCfgXOduModel
INTEGER,
gnOduCfgXFreqPlanStandard
DisplayString,
gnOduCfgXFreqDevider
INTEGER,
gnOduCfgXLoopbackOption
INTEGER,
gnOduCfgXxpicClockMode
INTEGER,
gnOduCfgXUnfadedReferenceRsl
INTEGER,
gnOduCfgXRfuMode
INTEGER,
gnOduCfgXRslRouteToConnector
INTEGER,
gnOduCfgXDelayCalibrationOperation
INTEGER,
gnOduCfgXDelayCalibrationValue
INTEGER,
gnOduCfgXDelayCalibrationWgType
DisplayString,
gnOduCfgXOduLog
INTEGER,
gnOduCfgXOduLogPeriod
INTEGER,
gnOduCfgXXpiPerfMonThresh
INTEGER
}
gnOduCfgXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnOduCfgXEntry 1 }
gnOduCfgXTxFreqNumLocalRemote OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the radio transmit frequency, displayed in
1/100 MHz. WRITE changes the local and remote sides. Only for systems that
support frequency configuration (Not channel)."
::= { gnOduCfgXEntry 2}
gnOduCfgXRLPerfMonThresh1 OBJECT-TYPE
SYNTAX INTEGER (-75..-15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the Received Level (RL) exceeds this threshold a
performance monitoring RL1 counter increments."
DEFVAL { -50}
::= { gnOduCfgXEntry 3}
gnOduCfgXRLPerfMonThresh2 OBJECT-TYPE
SYNTAX INTEGER (-75..-15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the Received Level (RL) exceeds this threshold a
performance monitoring RL2 counter increments."
DEFVAL { -70}
::= { gnOduCfgXEntry 4}
gnOduCfgXATPCStatus OBJECT-TYPE
SYNTAX INTEGER { on(2), off(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates if the ATPC option is enabled or disabled."
DEFVAL { on}
::= { gnOduCfgXEntry 5}
gnOduCfgXMUTEStatus OBJECT-TYPE
SYNTAX INTEGER { on(2), off(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates if transmitter will be in mute state.
(Mute on -> don't transmit) "
DEFVAL { off}
::= { gnOduCfgXEntry 6 }
gnOduCfgXAntennaType OBJECT-TYPE
SYNTAX INTEGER { oneFoot(2), twoFeet(3), threeFeet(4), fourFeet(5),
sixFeet(6) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates the size of the antenna used
in the ODU. This attribute will not auto-detect the antenna size.
It is used for the unfaded RSL calculation feature included in
the element manager."
DEFVAL { oneFoot }
::= { gnOduCfgXEntry 7 }
gnOduCfgXTransmitLevel OBJECT-TYPE
SYNTAX INTEGER (-50..34)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the transmitter output power level of the signal
transmitted by the radios, displayed in DBM. "
::= { gnOduCfgXEntry 8 }
gnOduCfgXRealTxFreqNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identifies the RF Tx frequency. For 6, 7 and 8 bands the Tx frequency
resolution is in kHz, for other bands the resolution is in 10kHz.
If the Tx frequency value is over 4000000 than the band is identified
as 6, 7 or 8G band."
::= { gnOduCfgXEntry 9 }
gnOduCfgXRealRxFreqNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identifies the RF Rx frequency. For 6, 7 and 8 bands the Rx frequency
resolution is in kHz, for other bands the resolution is in 10kHz.
If the Rx frequency value is over 4000000 than the band is identified
as 6, 7 or 8G band."
::= { gnOduCfgXEntry 10}
gnOduCfgXMinTxFreqNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This the Minimum TX frequency that the ODU can receive - Used by the
management station."
::= { gnOduCfgXEntry 11 }
gnOduCfgXMaxTxFreqNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This the Maximum TX frequency that the ODU can receive - Used by the
management station."
::= { gnOduCfgXEntry 12}
gnOduCfgXMaxTxLevel OBJECT-TYPE
SYNTAX INTEGER (0..99)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the theoretical maximum level that this ODU unit
can transmit."
::= { gnOduCfgXEntry 13 }
gnOduCfgXRefRsl OBJECT-TYPE
SYNTAX INTEGER (-70..-30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the received level reference, applicable when utilizing ATPC mode;
displayed in dBm."
::= { gnOduCfgXEntry 14 }
gnOduCfgXForceRmtMuteTx OBJECT-TYPE
SYNTAX INTEGER { on(2), off(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When on, this parameter force the transmitter to be in mute state.
(Mute on -> don't transmit) "
DEFVAL { off }
::= { gnOduCfgXEntry 15 }
gnOduCfgXForceRmtMaxTx OBJECT-TYPE
SYNTAX INTEGER (-50..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter force the transmitter output power level of the signal
transmitted by the radio. "
::= { gnOduCfgXEntry 16 }
gnOduCfgXTLPerfMonThresh1 OBJECT-TYPE
SYNTAX INTEGER (-10..25)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the Transmitted Level (TL) exceeds this threshold a
performance monitoring TL1 counter increments."
DEFVAL { 25 }
::= { gnOduCfgXEntry 17 }
gnOduCfgXOperation OBJECT-TYPE
SYNTAX INTEGER
{
noOperation(2),
setOduDefaultConf(3),
resetODU(4),
swResetODU(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter allows to perform ODU operations.
(3) will SET all ODU default configurations.
(4) will implement ODU reset."
DEFVAL { noOperation }
::= { gnOduCfgXEntry 18 }
gnOduCfgXODUSerialNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ODU serial number - up to 20 characters "
::= { gnOduCfgXEntry 19 }
gnOduCfgXChannelBandwidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The TX channel bandwidth, displayed in 1/100 MHz.
For example:
An STM-1 ETSI TX channel bandwidth of 56MHz is displayed as the value 5600."
::= { gnOduCfgXEntry 20 }
gnOduCfgXMinRxFreqNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This the Minimum RX frequency that the ODU can receive - Used by the
management station."
::= { gnOduCfgXEntry 21 }
gnOduCfgXMaxRxFreqNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This the Maximum RX frequency that the ODU can receive - Used by the
management station."
::= { gnOduCfgXEntry 22}
gnOduCfgXRxFreqNumLocalRemote OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the radio transmit frequency, displayed in
1/100 MHz. WRITE changes the local and remote sides. Only for systems that
support frequency configuration (Not channel)."
::= { gnOduCfgXEntry 23}
gnOduCfgXOduLoopSupport OBJECT-TYPE
SYNTAX INTEGER {
notSupported(2),
supported(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Inidcation for loopback support by the connected ODU."
::= { gnOduCfgXEntry 24}
gnOduCfgXOduModel OBJECT-TYPE
SYNTAX INTEGER {
unknown(2),
v2(3), -- Phos ODU
v1(4), -- Fibe ODU
v3(5), -- Titan ODU
v4(6), -- Vanad RFU
v5(7), -- Ippon SP RFU
v6(8), -- Ippon HP RFU
v7(9), -- Ippon Hittite SP RFU
v8(10), -- Ippon Hittite HP RFU
v9(11) -- Vanad Wide RFU
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { gnOduCfgXEntry 25}
gnOduCfgXFreqPlanStandard OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the NMS use."
::= { gnOduCfgXEntry 26}
gnOduCfgXFreqDevider OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number with which we should divide the MIB Freq value to get to the actual Freq (100 or 1000) "
::= { gnOduCfgXEntry 27}
gnOduCfgXLoopbackOption OBJECT-TYPE
SYNTAX INTEGER {
noloopback(2),
interfaceInterLoop(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter enable the user to activate an ODU loopback ."
DEFVAL { noloopback }
::= { gnOduCfgXEntry 28 }
gnOduCfgXxpicClockMode OBJECT-TYPE
SYNTAX INTEGER {
standAlone(2),
masterClock(3),
slaveClock(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "This is the status of the xpic clock mode."
::= { gnOduCfgXEntry 29 }
gnOduCfgXUnfadedReferenceRsl OBJECT-TYPE
SYNTAX INTEGER (-70..-15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is used for the unfaded RSL calculation feature included in
the element manager."
DEFVAL { -70 }
::= { gnOduCfgXEntry 30 }
gnOduCfgXRfuMode OBJECT-TYPE
SYNTAX INTEGER
{
main(2),
diversity(3),
combined(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RX mode of operation."
DEFVAL {main }
::= { gnOduCfgXEntry 31 }
gnOduCfgXRslRouteToConnector OBJECT-TYPE
SYNTAX INTEGER
{
main(2),
diversity(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Choose the receive level signal for the RSL connector."
DEFVAL {main }
::= { gnOduCfgXEntry 32 }
gnOduCfgXDelayCalibrationOperation OBJECT-TYPE
SYNTAX INTEGER
{
noAction(2),
activate(3),
error(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter enables launching a delay calibration parameters calculation."
DEFVAL {noAction }
::= { gnOduCfgXEntry 33 }
gnOduCfgXDelayCalibrationValue OBJECT-TYPE
SYNTAX INTEGER (-130..130)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates the delay calibration result and delay calibration override value.
values are between -130 to 130."
::= { gnOduCfgXEntry 34 }
gnOduCfgXDelayCalibrationWgType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..45))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delay Calibration WG Type For the NMS use."
::= { gnOduCfgXEntry 35 }
gnOduCfgXOduLog OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter enable the user to activate ODU log."
::= { gnOduCfgXEntry 36 }
gnOduCfgXOduLogPeriod OBJECT-TYPE
SYNTAX INTEGER (1..600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter enable the user to chose the log peroid (in sec)."
::= { gnOduCfgXEntry 37 }
gnOduCfgXXpiPerfMonThresh OBJECT-TYPE
SYNTAX INTEGER (10..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When the Received XPI beneath this threshold a
performance monitoring XPI counter increments (future develope)."
DEFVAL {20}
::= { gnOduCfgXEntry 38}
-- RO parameters described the state of the ODU.
gnOduStatusXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduStatusXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the status of the Outdoor unit
of the system."
::= { gnODU 5 }
gnOduStatusXEntry OBJECT-TYPE
SYNTAX GnOduStatusXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the ODU Status Table. This table
contains two rows, indexed by gnOduStatusXId= 3 for drawer1 ODU
and gnOduStatusXId = 4 for drawer2 ODU."
INDEX { gnOduStatusXId }
::= { gnOduStatusXTable 1 }
GnOduStatusXEntry ::=
SEQUENCE {
gnOduStatusXId
INTEGER,
gnOduStatusXCelsiusTemp
INTEGER,
gnOduStatusXFahrenheitTemp
INTEGER,
gnOduStatusXTransmitLevel
INTEGER,
gnOduStatusXReceiveLevel
INTEGER,
gnOduStatusXSynthesizerVCOLock
OCTET STRING,
gnOduStatusXPowerSupply
OCTET STRING,
gnOduStatusXIfcSupported
INTEGER,
gnOduStatusXRslDiversity
INTEGER,
gnOduStatusXRslCombined
INTEGER,
gnOduStatusXRfuAddress
INTEGER,
gnOduStatusXMinTransmitLevel
INTEGER,
gnOduStatusXOduSWVer
DisplayString,
gnOduStatusXOduSWPostVer
DisplayString,
gnOduStatusXRfuFwVer
DisplayString,
gnOduStatusXValidIntervals
INTEGER
}
gnOduStatusXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnOduStatusXEntry 1 }
gnOduStatusXCelsiusTemp OBJECT-TYPE
SYNTAX INTEGER (-70..80)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the temperature of the ODU in degrees Celsius."
::= { gnOduStatusXEntry 2 }
gnOduStatusXFahrenheitTemp OBJECT-TYPE
SYNTAX INTEGER (-58..176)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the temperature of the ODU in degrees Fahrenheit."
::= { gnOduStatusXEntry 3 }
gnOduStatusXTransmitLevel OBJECT-TYPE
SYNTAX INTEGER (-99..34)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the transmit level of the signal transmitted by the radios
transmitter, displayed in DBM."
::= { gnOduStatusXEntry 4 }
gnOduStatusXReceiveLevel OBJECT-TYPE
SYNTAX INTEGER (-99..-15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the receive level of the signal transmitted by the radios
transmitter, displayed in DBM."
::= { gnOduStatusXEntry 5}
gnOduStatusXSynthesizerVCOLock OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This octet represents the ODU status as follows (bit 1, LSB):
bit 1 on = TX IF synthesizer
bit 2 on = RX IF synthesizer
bit 3 on = Xband synthesizer
bit 4 on = History TX IF synthesizer
bit 5 on = History RX IF synthesizer
bit 6 on = History Xband synthesizer "
::= { gnOduStatusXEntry 6}
gnOduStatusXPowerSupply OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This octet represents the status of the power
supplies of the ODU:
bit 1 on = +5V faulty
bit 2 on = +8V faulty
bit 3 on = +12V faulty
bit 4 on = -12V faulty."
::= { gnOduStatusXEntry 7}
gnOduStatusXIfcSupported OBJECT-TYPE
SYNTAX INTEGER
{
yes(2),
no(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for IFC support."
::= { gnOduStatusXEntry 8}
gnOduStatusXRslDiversity OBJECT-TYPE
SYNTAX INTEGER (-99..0)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the receive level of the space diversity signal, displayed in DBM."
::= { gnOduStatusXEntry 9}
gnOduStatusXRslCombined OBJECT-TYPE
SYNTAX INTEGER (-99..0)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the receive level of the combined signal, displayed in DBM."
::= { gnOduStatusXEntry 10 }
gnOduStatusXRfuAddress OBJECT-TYPE
SYNTAX INTEGER (0..31)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RFU Address."
::= { gnOduStatusXEntry 11 }
gnOduStatusXMinTransmitLevel OBJECT-TYPE
SYNTAX INTEGER (-50..34)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the minimum transmit level of the signal transmitted by the radios
transmitter, displayed in DBM.. (for RFU unit only)"
::= { gnOduStatusXEntry 12 }
gnOduStatusXOduSWVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ODU software version."
::= { gnOduStatusXEntry 13 }
gnOduStatusXOduSWPostVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ODU post reset software version."
::= { gnOduStatusXEntry 14 }
gnOduStatusXRfuFwVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the RFU FW version."
::= { gnOduStatusXEntry 15 }
gnOduStatusXValidIntervals OBJECT-TYPE
SYNTAX INTEGER (0..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of previous valid intervals for which valid data has been stored
for the specific ODU."
::= { gnOduStatusXEntry 16 }
-- This part of the MIB deals with the performance monitoring
-- of the ODU part of the system.
-- This part is built according the habits in the telcos/datacom community.
-- There are three tables:
-- gnOduMonCurrXTable that keeps the counters of the current 15 min interval.
-- gnOduMonIntervalXTable that keeps the counters of the past 96 intervals.
-- gnOduMonDayXTable that keeps the counters of the past 30 days.
gnOduMonitorX OBJECT IDENTIFIER ::= { gnODU 6 }
gnOduMonCurrXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonCurrXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of the current 15 min interval."
::= { gnOduMonitorX 1 }
gnOduMonCurrXEntry OBJECT-TYPE
SYNTAX GnOduMonCurrXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Current Interval Table. This table
contains two rows, indexed by gnOduMonCurrXId= 3 for drawer1 ODU and
gnOduMonCurrXId = 4 for drawer2 ODU."
INDEX { gnOduMonCurrXId }
::= { gnOduMonCurrXTable 1 }
GnOduMonCurrXEntry ::=
SEQUENCE {
gnOduMonCurrXId
INTEGER,
gnOduMonCurrXMinRL
INTEGER,
gnOduMonCurrXMaxRL
INTEGER,
gnOduMonCurrXTLThresh1Exceed
Counter,
gnOduMonCurrXRLThresh1Exceed
Counter,
gnOduMonCurrXRLThresh2Exceed
Counter,
gnOduMonCurrXDayMinRL
INTEGER,
gnOduMonCurrXDayMaxRL
INTEGER,
gnOduMonCurrXDayTLThresh1Exceed
Counter,
gnOduMonCurrXDayRLThresh1Exceed
Counter,
gnOduMonCurrXDayRLThresh2Exceed
Counter,
gnOduMonCurrXMinTL
INTEGER,
gnOduMonCurrXMaxTL
INTEGER,
gnOduMonCurrXDayMinTL
INTEGER,
gnOduMonCurrXDayMaxTL
INTEGER,
gnOduMonCurrXXpi
INTEGER,
gnOduMonCurrXMinXpi
INTEGER,
gnOduMonCurrXMaxXpi
INTEGER,
gnOduMonCurrXDayMinXpi
INTEGER,
gnOduMonCurrXDayMaxXpi
INTEGER,
gnOduMonCurrXXpiThreshExceed
Counter,
gnOduMonCurrXDayXpiThreshExceed
Counter,
gnOduMonCurrXMse
INTEGER,
gnOduMonCurrXLastDayIDF
INTEGER
}
gnOduMonCurrXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnOduMonCurrXEntry 1 }
gnOduMonCurrXMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum received signal level (RL) in the current 15 minute interval.
(in DBM) "
::= { gnOduMonCurrXEntry 2 }
gnOduMonCurrXMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum received signal level (RL) in the current 15 minute interval.
(in DBM). "
::= { gnOduMonCurrXEntry 3 }
gnOduMonCurrXTLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds TL exceeded the TL1
threshold in the last 15 minutes."
::= { gnOduMonCurrXEntry 4 }
gnOduMonCurrXRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1
threshold in the last 15 minutes."
::= { gnOduMonCurrXEntry 5 }
gnOduMonCurrXRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2
threshold in the last 15 minutes."
::= { gnOduMonCurrXEntry 6 }
gnOduMonCurrXDayMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Receive Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrXEntry 7}
gnOduMonCurrXDayMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Receive Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrXEntry 8}
gnOduMonCurrXDayTLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds TL exceeded the TL1 threshold
in the last 24 hours."
::= { gnOduMonCurrXEntry 9}
gnOduMonCurrXDayRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1 threshold
in the last 24 hours."
::= { gnOduMonCurrXEntry 10 }
gnOduMonCurrXDayRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2 threshold
in the last 24 hours."
::= { gnOduMonCurrXEntry 11 }
gnOduMonCurrXMinTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum transmitted signal level (TL) in the current 15 minute interval.
(in DBM) "
::= { gnOduMonCurrXEntry 12 }
gnOduMonCurrXMaxTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum transmitted signal level (TL) in the current 15 minute interval.
(in DBM). "
::= { gnOduMonCurrXEntry 13 }
gnOduMonCurrXDayMinTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Transmitted Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrXEntry 14}
gnOduMonCurrXDayMaxTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Transmitted Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrXEntry 15}
gnOduMonCurrXXpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Current XPI level (in [DBM/100]).
For [DBM] level divide by 100."
::= { gnOduMonCurrXEntry 16}
gnOduMonCurrXMinXpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum XPI Level (in [DBM/100]).
in the last 15 minute (future develope).
For [DBM] level divide by 100."
::= { gnOduMonCurrXEntry 17}
gnOduMonCurrXMaxXpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum XPI Level (in [DBM/100]).
in the last 15 minute (future develope).
For [DBM] level divide by 100."
::= { gnOduMonCurrXEntry 18}
gnOduMonCurrXDayMinXpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum XPI Level (in [DBM/100]).
in the last 24 hours (future develope).
For [DBM] level divide by 100."
::= { gnOduMonCurrXEntry 19}
gnOduMonCurrXDayMaxXpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum XPI Level (in [DBM/100]).
in the last 24 hours (future develope).
For [DBM] level divide by 100."
::= { gnOduMonCurrXEntry 20}
gnOduMonCurrXXpiThreshExceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds XPI beneath the XPI
threshold in the last 15 minutes (future develope)."
::= { gnOduMonCurrXEntry 21 }
gnOduMonCurrXDayXpiThreshExceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds XPI beneath the XPI threshold
in the last 24 hours (future develope)."
::= { gnOduMonCurrXEntry 22}
gnOduMonCurrXMse OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Current MSE level (in [DBM/100]).
For [DBM] level divide by 100."
::= { gnOduMonCurrXEntry 23}
gnOduMonCurrXLastDayIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnOduMonCurrXEntry 24 }
gnOduMonIntervalXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonIntervalXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of the 96 last intervals of 15 min."
::= { gnOduMonitorX 2 }
gnOduMonIntervalXEntry OBJECT-TYPE
SYNTAX GnOduMonIntervalXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Interval Table. This table
is indexed by gnOduMonIntervalXId= 3 for drawer1 ODU and
gnOduMonIntervalXId = 4 for drawer2 ODU and by interval idx"
INDEX { gnOduMonIntervalXId, gnOduMonIntervalXIdx }
::= { gnOduMonIntervalXTable 1 }
GnOduMonIntervalXEntry ::=
SEQUENCE {
gnOduMonIntervalXId
INTEGER,
gnOduMonIntervalXIdx
INTEGER,
gnOduMonIntervalXMinRL
INTEGER,
gnOduMonIntervalXMaxRL
INTEGER,
gnOduMonIntervalXTLThresh1Exceed
Counter,
gnOduMonIntervalXEvent
OCTET STRING,
gnOduMonIntervalXRLThresh1Exceed
Counter,
gnOduMonIntervalXRLThresh2Exceed
Counter,
gnOduMonIntervalXMinTL
INTEGER,
gnOduMonIntervalXMaxTL
INTEGER,
gnOduMonIntervalXMinXpi
INTEGER,
gnOduMonIntervalXMaxXpi
INTEGER,
gnOduMonIntervalXXpiThreshExceed
Counter,
gnOduMonIntervalXIDF
INTEGER
}
gnOduMonIntervalXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnOduMonIntervalXEntry 1 }
gnOduMonIntervalXIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interval number to which this row is related. "
::= { gnOduMonIntervalXEntry 2 }
gnOduMonIntervalXMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum RL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalXEntry 3 }
gnOduMonIntervalXMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum RL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalXEntry 4 }
gnOduMonIntervalXTLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds TL exceeded the TL1
threshold in a 15 minutes interval."
::= { gnOduMonIntervalXEntry 5 }
gnOduMonIntervalXEvent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Events
bit 1 = CommDisc.
bit 2 = CommCon
bit 3 = ATPC2Max.
bit 4 = ATPC2Norm.
Included for future development, not currently supported."
::= { gnOduMonIntervalXEntry 6 }
gnOduMonIntervalXRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1
threshold in a 15 minutes interval."
::= { gnOduMonIntervalXEntry 7 }
gnOduMonIntervalXRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2
threshold in a 15 minutes interval."
::= { gnOduMonIntervalXEntry 8 }
gnOduMonIntervalXMinTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum TL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalXEntry 9 }
gnOduMonIntervalXMaxTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum TL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalXEntry 10 }
gnOduMonIntervalXMinXpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum XPI level (in [DBM/100]) in a 15 minutes intervalin (future develope).
For [DBM] level divide by 100."
::= { gnOduMonIntervalXEntry 11 }
gnOduMonIntervalXMaxXpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum XPI level (in [DBM/100]) in a 15 minutes interval (future develope).
For [DBM] level divide by 100."
::= { gnOduMonIntervalXEntry 12 }
gnOduMonIntervalXXpiThreshExceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds XPI exceeded the XPI
threshold in a 15 minutes interval (future develope)."
::= { gnOduMonIntervalXEntry 13 }
gnOduMonIntervalXIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnOduMonIntervalXEntry 14 }
gnOduMonDayXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonDayXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of 96 intervals of 15 min."
::= { gnOduMonitorX 3 }
gnOduMonDayXEntry OBJECT-TYPE
SYNTAX GnOduMonDayXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Days Table. This table
is indexed by gnOduMonDayXId= 3 for drawer1 ODU and
gnOduMonDayXId = 4 for drawer2 ODU and by day idx.
gnOduMonDayIdx = 1 is one day from now,
gnOduMonDayIdx = 2 is two days from now, and so on..."
INDEX { gnOduMonDayXId, gnOduMonDayXIdx }
::= { gnOduMonDayXTable 1 }
GnOduMonDayXEntry ::=
SEQUENCE {
gnOduMonDayXId
INTEGER,
gnOduMonDayXIdx
INTEGER,
gnOduMonDayXMinRL
INTEGER,
gnOduMonDayXMaxRL
INTEGER,
gnOduMonDayXTLThresh1Exceed
Counter,
gnOduMonDayXRLThresh1Exceed
Counter,
gnOduMonDayXRLThresh2Exceed
Counter,
gnOduMonDayXMinTL
INTEGER,
gnOduMonDayXMaxTL
INTEGER,
gnOduMonDayXMinXpi
INTEGER,
gnOduMonDayXMaxXpi
INTEGER,
gnOduMonDayXXpiThreshExceed
Counter,
gnOduMonDayXIDF
INTEGER
}
gnOduMonDayXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnOduMonDayXEntry 1 }
gnOduMonDayXIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interval number to which this row is related. "
::= { gnOduMonDayXEntry 2 }
gnOduMonDayXMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Receive Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayXEntry 3}
gnOduMonDayXMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Receive Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayXEntry 4}
gnOduMonDayXTLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds TL exceeded the TL1 threshold
in a 24 hour interval."
::= { gnOduMonDayXEntry 5}
gnOduMonDayXRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1 threshold
in a 24 hour interval."
::= { gnOduMonDayXEntry 6}
gnOduMonDayXRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2 threshold
in a 24 hour interval."
::= { gnOduMonDayXEntry 7}
gnOduMonDayXMinTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Transmit Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayXEntry 8}
gnOduMonDayXMaxTL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Transmit Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayXEntry 9}
gnOduMonDayXMinXpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum XPI Level (in [DBM/100]) in a 24 hour interval (future develope).
For [DBM] level divide by 100."
::= { gnOduMonDayXEntry 10}
gnOduMonDayXMaxXpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum XPI Level (in [DBM/100]) in a 24 hour interval (future develope).
For [DBM] level divide by 100."
::= { gnOduMonDayXEntry 11}
gnOduMonDayXXpiThreshExceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds XPI exceeded the XPI threshold
in a 24 hour interval (future develope)."
::= { gnOduMonDayXEntry 12}
gnOduMonDayXIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnOduMonDayXEntry 13 }
gnOduMonCurrDiversityXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonCurrDiversityXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of the current 15 min interval."
::= { gnOduMonitorX 4 }
gnOduMonCurrDiversityXEntry OBJECT-TYPE
SYNTAX GnOduMonCurrDiversityXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Current Interval Table. This table
contains two rows, indexed by gnOduMonCurrCombinedXId= 3 for drawer1 ODU and
gnOduMonCurrDiversityXId = 4 for drawer2 ODU."
INDEX { gnOduMonCurrDiversityXId }
::= { gnOduMonCurrDiversityXTable 1 }
GnOduMonCurrDiversityXEntry ::=
SEQUENCE {
gnOduMonCurrDiversityXId
INTEGER,
gnOduMonCurrDiversityXMinRL
INTEGER,
gnOduMonCurrDiversityXMaxRL
INTEGER,
gnOduMonCurrDiversityXRLThresh1Exceed
Counter,
gnOduMonCurrDiversityXRLThresh2Exceed
Counter,
gnOduMonCurrDiversityXDayMinRL
INTEGER,
gnOduMonCurrDiversityXDayMaxRL
INTEGER,
gnOduMonCurrDiversityXDayRLThresh1Exceed
INTEGER,
gnOduMonCurrDiversityXDayRLThresh2Exceed
INTEGER
}
gnOduMonCurrDiversityXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnOduMonCurrDiversityXEntry 1 }
gnOduMonCurrDiversityXMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum received signal level (RL) in the current 15 minute interval.
(in DBM) "
::= { gnOduMonCurrDiversityXEntry 2 }
gnOduMonCurrDiversityXMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum received signal level (RL) in the current 15 minute interval.
(in DBM). "
::= { gnOduMonCurrDiversityXEntry 3 }
gnOduMonCurrDiversityXRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1
threshold in the last 15 minutes."
::= { gnOduMonCurrDiversityXEntry 4 }
gnOduMonCurrDiversityXRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2
threshold in the last 15 minutes."
::= { gnOduMonCurrDiversityXEntry 5 }
gnOduMonCurrDiversityXDayMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Receive Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrDiversityXEntry 6}
gnOduMonCurrDiversityXDayMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Receive Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrDiversityXEntry 7}
gnOduMonCurrDiversityXDayRLThresh1Exceed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of seconds Diversity RL exceeded the RL1 threshold
in the last 24 hours."
::= { gnOduMonCurrDiversityXEntry 8}
gnOduMonCurrDiversityXDayRLThresh2Exceed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of seconds Diversity RL exceeded the RL2 threshold
in the last 24 hours."
::= { gnOduMonCurrDiversityXEntry 9}
gnOduMonIntervalDiversityXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonIntervalDiversityXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of the 96 last intervals of 15 min."
::= { gnOduMonitorX 5 }
gnOduMonIntervalDiversityXEntry OBJECT-TYPE
SYNTAX GnOduMonIntervalDiversityXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Interval Table. This table
is indexed by gnOduMonIntervalDiversityXId= 3 for drawer1 ODU and
gnOduMonIntervalDiversityXId = 4 for drawer2 ODU and by interval idx"
INDEX { gnOduMonIntervalDiversityXId, gnOduMonIntervalDiversityXIdx }
::= { gnOduMonIntervalDiversityXTable 1 }
GnOduMonIntervalDiversityXEntry ::=
SEQUENCE {
gnOduMonIntervalDiversityXId
INTEGER,
gnOduMonIntervalDiversityXIdx
INTEGER,
gnOduMonIntervalDiversityXMinRL
INTEGER,
gnOduMonIntervalDiversityXMaxRL
INTEGER,
gnOduMonIntervalDiversityXRLThresh1Exceed
Counter,
gnOduMonIntervalDiversityXRLThresh2Exceed
Counter
}
gnOduMonIntervalDiversityXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnOduMonIntervalDiversityXEntry 1 }
gnOduMonIntervalDiversityXIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interval number to which this row is related. "
::= { gnOduMonIntervalDiversityXEntry 2 }
gnOduMonIntervalDiversityXMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum RL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalDiversityXEntry 3 }
gnOduMonIntervalDiversityXMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum RL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalDiversityXEntry 4 }
gnOduMonIntervalDiversityXRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1
threshold in a 15 minutes interval."
::= { gnOduMonIntervalDiversityXEntry 5 }
gnOduMonIntervalDiversityXRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2
threshold in a 15 minutes interval."
::= { gnOduMonIntervalDiversityXEntry 6 }
gnOduMonDayDiversityXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonDayDiversityXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of 96 intervals of 15 min."
::= { gnOduMonitorX 6 }
gnOduMonDayDiversityXEntry OBJECT-TYPE
SYNTAX GnOduMonDayDiversityXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Days Table. This table
is indexed by gnOduMonDayDiversityXId= 3 for drawer1 ODU and
gnOduMonDayDiversityXId = 4 for drawer2 ODU and by day idx.
gnOduMonDayDiversityXIdx = 1 is one day from now,
gnOduMonDayDiversityXIdx = 2 is two days from now, and so on..."
INDEX { gnOduMonDayDiversityXId, gnOduMonDayDiversityXIdx }
::= { gnOduMonDayDiversityXTable 1 }
GnOduMonDayDiversityXEntry ::=
SEQUENCE {
gnOduMonDayDiversityXId
INTEGER,
gnOduMonDayDiversityXIdx
INTEGER,
gnOduMonDayDiversityXMinRL
INTEGER,
gnOduMonDayDiversityXMaxRL
INTEGER,
gnOduMonDayDiversityXRLThresh1Exceed
Counter,
gnOduMonDayDiversityXRLThresh2Exceed
Counter
}
gnOduMonDayDiversityXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnOduMonDayDiversityXEntry 1 }
gnOduMonDayDiversityXIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interval number to which this row is related. "
::= { gnOduMonDayDiversityXEntry 2 }
gnOduMonDayDiversityXMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Receive Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayDiversityXEntry 3}
gnOduMonDayDiversityXMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Receive Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayDiversityXEntry 4}
gnOduMonDayDiversityXRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1 threshold
in a 24 hour interval."
::= { gnOduMonDayDiversityXEntry 5}
gnOduMonDayDiversityXRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2 threshold
in a 24 hour interval."
::= { gnOduMonDayDiversityXEntry 6}
gnOduMonCurrCombinedXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonCurrCombinedXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of the current 15 min interval."
::= { gnOduMonitorX 7 }
gnOduMonCurrCombinedXEntry OBJECT-TYPE
SYNTAX GnOduMonCurrCombinedXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Current Interval Table. This table
contains two rows, indexed by gnOduMonCurrCombinedXId= 3 for drawer1 ODU and
gnOduMonCurrCombinedXId = 4 for drawer2 ODU."
INDEX { gnOduMonCurrCombinedXId }
::= { gnOduMonCurrCombinedXTable 1 }
GnOduMonCurrCombinedXEntry ::=
SEQUENCE {
gnOduMonCurrCombinedXId
INTEGER,
gnOduMonCurrCombinedXMinRL
INTEGER,
gnOduMonCurrCombinedXMaxRL
INTEGER,
gnOduMonCurrCombinedXRLThresh1Exceed
Counter,
gnOduMonCurrCombinedXRLThresh2Exceed
Counter,
gnOduMonCurrCombinedXDayMinRL
INTEGER,
gnOduMonCurrCombinedXDayMaxRL
INTEGER,
gnOduMonCurrCombinedXDayRLThresh1Exceed
INTEGER,
gnOduMonCurrCombinedXDayRLThresh2Exceed
INTEGER
}
gnOduMonCurrCombinedXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnOduMonCurrCombinedXEntry 1 }
gnOduMonCurrCombinedXMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum received signal level (RL) in the current 15 minute interval.
(in DBM) "
::= { gnOduMonCurrCombinedXEntry 2 }
gnOduMonCurrCombinedXMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum received signal level (RL) in the current 15 minute interval.
(in DBM). "
::= { gnOduMonCurrCombinedXEntry 3 }
gnOduMonCurrCombinedXRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1
threshold in the last 15 minutes."
::= { gnOduMonCurrCombinedXEntry 4 }
gnOduMonCurrCombinedXRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2
threshold in the last 15 minutes."
::= { gnOduMonCurrCombinedXEntry 5 }
gnOduMonCurrCombinedXDayMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Receive Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrCombinedXEntry 6}
gnOduMonCurrCombinedXDayMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Receive Level (in DBM).
in the last 24 hours."
::= { gnOduMonCurrCombinedXEntry 7}
gnOduMonCurrCombinedXDayRLThresh1Exceed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of seconds Combined RL exceeded the RL1 threshold
in the last 24 hours."
::= { gnOduMonCurrCombinedXEntry 8}
gnOduMonCurrCombinedXDayRLThresh2Exceed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of seconds Combined RL exceeded the RL2 threshold
in the last 24 hours."
::= { gnOduMonCurrCombinedXEntry 9}
gnOduMonIntervalCombinedXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonIntervalCombinedXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of the 96 last intervals of 15 min."
::= { gnOduMonitorX 8 }
gnOduMonIntervalCombinedXEntry OBJECT-TYPE
SYNTAX GnOduMonIntervalCombinedXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Interval Table. This table
is indexed by gnOduMonIntervalCombinedXId= 3 for drawer1 ODU and
gnOduMonIntervalCombinedXId = 4 for drawer2 ODU and by interval idx"
INDEX { gnOduMonIntervalCombinedXId, gnOduMonIntervalCombinedXIdx }
::= { gnOduMonIntervalCombinedXTable 1 }
GnOduMonIntervalCombinedXEntry ::=
SEQUENCE {
gnOduMonIntervalCombinedXId
INTEGER,
gnOduMonIntervalCombinedXIdx
INTEGER,
gnOduMonIntervalCombinedXMinRL
INTEGER,
gnOduMonIntervalCombinedXMaxRL
INTEGER,
gnOduMonIntervalCombinedXRLThresh1Exceed
Counter,
gnOduMonIntervalCombinedXRLThresh2Exceed
Counter
}
gnOduMonIntervalCombinedXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnOduMonIntervalCombinedXEntry 1 }
gnOduMonIntervalCombinedXIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interval number to which this row is related. "
::= { gnOduMonIntervalCombinedXEntry 2 }
gnOduMonIntervalCombinedXMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum RL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalCombinedXEntry 3 }
gnOduMonIntervalCombinedXMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum RL in a 15 minutes interval. (in DBM). "
::= { gnOduMonIntervalCombinedXEntry 4 }
gnOduMonIntervalCombinedXRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1
threshold in a 15 minutes interval."
::= { gnOduMonIntervalCombinedXEntry 5 }
gnOduMonIntervalCombinedXRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2
threshold in a 15 minutes interval."
::= { gnOduMonIntervalCombinedXEntry 6 }
gnOduMonDayCombinedXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnOduMonDayCombinedXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of 96 intervals of 15 min."
::= { gnOduMonitorX 9 }
gnOduMonDayCombinedXEntry OBJECT-TYPE
SYNTAX GnOduMonDayCombinedXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Days Table. This table
is indexed by gnOduMonDayDiversityXId= 3 for drawer1 ODU and
gnOduMonDayCombinedXId = 4 for drawer2 ODU and by day idx.
gnOduMonDayCombinedXIdx = 1 is one day from now,
gnOduMonDayCombinedXIdx = 2 is two days from now, and so on..."
INDEX { gnOduMonDayCombinedXId, gnOduMonDayCombinedXIdx }
::= { gnOduMonDayCombinedXTable 1 }
GnOduMonDayCombinedXEntry ::=
SEQUENCE {
gnOduMonDayCombinedXId
INTEGER,
gnOduMonDayCombinedXIdx
INTEGER,
gnOduMonDayCombinedXMinRL
INTEGER,
gnOduMonDayCombinedXMaxRL
INTEGER,
gnOduMonDayCombinedXRLThresh1Exceed
Counter,
gnOduMonDayCombinedXRLThresh2Exceed
Counter
}
gnOduMonDayCombinedXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { gnOduMonDayCombinedXEntry 1 }
gnOduMonDayCombinedXIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interval number to which this row is related. "
::= { gnOduMonDayCombinedXEntry 2 }
gnOduMonDayCombinedXMinRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum Receive Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayCombinedXEntry 3}
gnOduMonDayCombinedXMaxRL OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum Receive Level (in DBM).
in a 24 hour interval."
::= { gnOduMonDayCombinedXEntry 4}
gnOduMonDayCombinedXRLThresh1Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL1 threshold
in a 24 hour interval."
::= { gnOduMonDayCombinedXEntry 5}
gnOduMonDayCombinedXRLThresh2Exceed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of seconds RL exceeded the RL2 threshold
in a 24 hour interval."
::= { gnOduMonDayCombinedXEntry 6}
----------------------------------------------------
gnIDU OBJECT IDENTIFIER ::= { gnUnits 2 }
gnMdm OBJECT IDENTIFIER ::= { gnIDU 1 }
gnMdmStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMdmStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the status of the Indoor part
of the system."
::= { gnMdm 2 }
gnMdmStatEntry OBJECT-TYPE
SYNTAX GnMdmStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the IDU Modem Configuration Table. This table
contains two rows, indexed by ifIndex= 1 for local modem and
ifIndex = 101 for remote modem."
INDEX { ifIndex }
::= { gnMdmStatTable 1 }
GnMdmStatEntry ::=
SEQUENCE {
gnMdmModStatus
INTEGER,
gnMdmDemodStatus
INTEGER,
gnMdmDefectBlocks
INTEGER,
gnMdmBytesCorrected
INTEGER,
gnMdmClearBC
INTEGER
}
gnMdmModStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(2),
modulatorFault(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameters indicates a modem fault. "
::= { gnMdmStatEntry 1 }
gnMdmDemodStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameters indicates a demodem fault - For internal use."
::= { gnMdmStatEntry 2 }
gnMdmDefectBlocks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of defected blocks that could not be corrected by the
FEC "
::= { gnMdmStatEntry 3 }
gnMdmBytesCorrected OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of bytes corrected by the FEC"
::= { gnMdmStatEntry 4 }
gnMdmClearBC OBJECT-TYPE
SYNTAX INTEGER {
noAction(2),
clear(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" clears Defected Blocks, Defected Bytes and Blocks Corrected."
::= { gnMdmStatEntry 5 }
gnMdmStatXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMdmStatXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the status of the Indoor part
of the system."
::= { gnMdm 3 }
gnMdmStatXEntry OBJECT-TYPE
SYNTAX GnMdmStatXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the IDU Modem Configuration Table."
INDEX { gnMdmStatXId }
::= { gnMdmStatXTable 1 }
GnMdmStatXEntry ::=
SEQUENCE {
gnMdmStatXId
INTEGER,
gnMdmStatXStandardOrg
INTEGER,
gnMdmStatXRemoteConnection
INTEGER,
gnMdmStatXModemType
INTEGER,
gnMdmStatXModemWorkTime
INTEGER,
gnMdmStatXModemSerialNumber
DisplayString,
gnMdmStatXModemFWVer
DisplayString,
gnMdmStatXModemFWPostVer
DisplayString,
gnMdmStatXModemScriptVer
DisplayString,
gnMdmStatXModemScriptPostVer
DisplayString,
gnMdmStatXIfLoopbackTimeOut
INTEGER,
gnMdmStatXBoardType
INTEGER,
gnMdmStatXDefectedBlocks
INTEGER,
gnMdmStatXScriptType
INTEGER,
gnMdmStatXAcmValidIntervals
INTEGER,
gnMdmStatXAcmSignalValid
INTEGER,
gnMdmStatXTxConstellation
INTEGER,
gnMdmStatXRxConstellation
INTEGER
}
gnMdmStatXId OBJECT-TYPE
SYNTAX INTEGER
{
modem1(3),
modem2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnMdmStatXEntry 1 }
gnMdmStatXStandardOrg OBJECT-TYPE
SYNTAX INTEGER {
etsi(2),
fcc(3),
japan(4),
lmds(5),
cmds(6),
australia(7),
other(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies which international standard is used."
::= { gnMdmStatXEntry 2 }
gnMdmStatXRemoteConnection OBJECT-TYPE
SYNTAX INTEGER {
connected(2),
disconnected(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Is the connection between the local manager and
the remote manager."
::= { gnMdmStatXEntry 3 }
gnMdmStatXModemType OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies the modem qam."
::= { gnMdmStatXEntry 4 }
gnMdmStatXModemWorkTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The modem Work Time (hours)."
DEFVAL {0}
::= { gnMdmStatXEntry 5 }
gnMdmStatXModemSerialNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the modem serial number - up to 20 characters "
::= { gnMdmStatXEntry 6 }
gnMdmStatXModemFWVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Modem firmware version."
::= { gnMdmStatXEntry 7 }
gnMdmStatXModemFWPostVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Modem post reset firmware version."
::= { gnMdmStatXEntry 8 }
gnMdmStatXModemScriptVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Modem script version."
::= { gnMdmStatXEntry 9 }
gnMdmStatXModemScriptPostVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Modem post reset script version."
::= { gnMdmStatXEntry 10 }
gnMdmStatXIfLoopbackTimeOut OBJECT-TYPE
SYNTAX INTEGER (0..1440)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the remaining time (in minutes)
till the relevant loopback timer will be expired.
when starting a loopback and the value of gnMdmStatXIfLoopbackTimeOut is x,
the gnMdmStatXIfLoopbackTimeOut will be also x, after one minute it will be x-1, etc."
::= { gnMdmStatXEntry 11 }
gnMdmStatXBoardType OBJECT-TYPE
SYNTAX INTEGER {
v1(2), -- phos
v2(3), -- summit
v3(4) -- avalon
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter defines the type of the modem for NMS use."
DEFVAL { v1 }
::= { gnMdmStatXEntry 12 }
gnMdmStatXDefectedBlocks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of defected blocks. "
::= { gnMdmStatXEntry 13 }
gnMdmStatXScriptType OBJECT-TYPE
SYNTAX INTEGER{
v1(2),
v2(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter specifies the type of the script.
v1 - Regular MRMC script.
v2 - ACM MRMC script."
::= { gnMdmStatXEntry 14 }
gnMdmStatXAcmValidIntervals OBJECT-TYPE
SYNTAX INTEGER (0..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the number of valid intervals."
::= { gnMdmStatXEntry 15 }
gnMdmStatXAcmSignalValid OBJECT-TYPE
SYNTAX INTEGER{
valid(2),
notValid(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates whether the modem is lock in ACM."
::= { gnMdmStatXEntry 16 }
gnMdmStatXTxConstellation OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current Tx modem constellation."
::= { gnMdmStatXEntry 17 }
gnMdmStatXRxConstellation OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current Rx modem constellation."
::= { gnMdmStatXEntry 18 }
gnMdmCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMdmCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { gnMdm 4 }
gnMdmCfgEntry OBJECT-TYPE
SYNTAX GnMdmCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
INDEX { gnMdmCfgId }
::= { gnMdmCfgTable 1 }
GnMdmCfgEntry ::=
SEQUENCE {
gnMdmCfgId
INTEGER,
gnMdmCfgDiversityMode
INTEGER
}
gnMdmCfgId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnMdmCfgEntry 1 }
gnMdmCfgDiversityMode OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
DEFVAL { disable }
::= { gnMdmCfgEntry 2 }
gnMdmCfgXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMdmCfgXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of modem."
::= { gnMdm 5 }
gnMdmCfgXEntry OBJECT-TYPE
SYNTAX GnMdmCfgXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the modem configuration table."
INDEX { gnMdmCfgXId }
::= { gnMdmCfgXTable 1 }
GnMdmCfgXEntry ::=
SEQUENCE {
gnMdmCfgXId
INTEGER,
gnMdmCfgXLatencyType
INTEGER,
gnMdmCfgXLinkId
INTEGER,
gnMdmCfgXRadioSide
INTEGER,
gnMdmCfgXMrmcConf
INTEGER,
gnMdmCfgXIfLoopback
INTEGER,
gnMdmCfgXHwReset
INTEGER,
gnMdmCfgXPrbsTest
INTEGER,
gnMdmCfgXClearCounters
INTEGER,
gnMdmCfgXAcmOperationMode
INTEGER,
gnMdmCfgXAcmMaximumConstellation
INTEGER
}
gnMdmCfgXId OBJECT-TYPE
SYNTAX INTEGER
{
modem1(3),
modem2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates which device is involved
in the specific row."
::= { gnMdmCfgXEntry 1 }
gnMdmCfgXLatencyType OBJECT-TYPE
SYNTAX INTEGER {
low(2),
high(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
DEFVAL { high }
::= { gnMdmCfgXEntry 2 }
gnMdmCfgXLinkId OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0 for 'old' system that doesn't support the link ID.
the user can enter values from 1 to 65535"
DEFVAL {0}
::= { gnMdmCfgXEntry 3 }
gnMdmCfgXRadioSide OBJECT-TYPE
SYNTAX INTEGER {
east(2),
west(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
DEFVAL {east}
::= { gnMdmCfgXEntry 4 }
gnMdmCfgXMrmcConf OBJECT-TYPE
SYNTAX INTEGER {
mrmc1528(1),
mrmc1550(2),
mrmc3156(3),
mrmc3150(4),
mrmc1228(5),
mrmc1540(6),
mrmc4410(7),
mrmc4420(8),
mrmc4440(9),
mrmc1125(10),
mrmc2050(11),
mrmc2030(12),
mrmc1340(13),
mrmc3756(18),
acm56(24),
acm50(25),
acm28(26)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Link data capacity"
::= { gnMdmCfgXEntry 5 }
gnMdmCfgXIfLoopback OBJECT-TYPE
SYNTAX INTEGER {
none(2),
active(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter enable the user to activate a loopback."
DEFVAL { none }
::= { gnMdmCfgXEntry 6 }
gnMdmCfgXHwReset OBJECT-TYPE
SYNTAX INTEGER
{
noOperation(2),
hwReset(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"hwReset - Hardware reset for modem board."
DEFVAL { noOperation }
::= { gnMdmCfgXEntry 7 }
gnMdmCfgXPrbsTest OBJECT-TYPE
SYNTAX INTEGER {
notActive(2),
active(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter enable the user to activate the PRBS test."
DEFVAL { notActive }
::= { gnMdmCfgXEntry 8 }
gnMdmCfgXClearCounters OBJECT-TYPE
SYNTAX INTEGER {
noAction(2),
clearCounters(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter enable the user to clear the PRBS counters."
DEFVAL { noAction }
::= { gnMdmCfgXEntry 9 }
gnMdmCfgXAcmOperationMode OBJECT-TYPE
SYNTAX INTEGER {
adaptive(1),
acm4QAM(2),
acm8QAM(3),
acm16QAM(4),
acm32QAM(5),
acm64QAM(6),
acm128QAM(7),
acm256QAM(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the administrative status of the ACM operational mode, this mode is valid on ACM script only."
DEFVAL { acm4QAM }
::= { gnMdmCfgXEntry 10 }
gnMdmCfgXAcmMaximumConstellation OBJECT-TYPE
SYNTAX INTEGER {
acm4QAM(2),
acm8QAM(3),
acm16QAM(4),
acm32QAM(5),
acm64QAM(6),
acm128QAM(7),
acm256QAM(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the maximum constellation of the ACM."
DEFVAL { acm4QAM }
::= { gnMdmCfgXEntry 11 }
gnMdmAcmStatXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMdmAcmStatXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the ACM status."
::= { gnMdm 6 }
gnMdmAcmStatXEntry OBJECT-TYPE
SYNTAX GnMdmAcmStatXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the modem ACM status table."
INDEX { gnMdmAcmStatXId, gnMdmAcmStatXQamId }
::= { gnMdmAcmStatXTable 1 }
GnMdmAcmStatXEntry ::=
SEQUENCE {
gnMdmAcmStatXId
INTEGER,
gnMdmAcmStatXQamId
INTEGER,
gnMdmAcmStatXRoundedThroughput
INTEGER,
gnMdmAcmStatXSupportedThroughput
INTEGER
}
gnMdmAcmStatXId OBJECT-TYPE
SYNTAX INTEGER{
modem1(3),
modem2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates which device is involved in the specific row."
::= { gnMdmAcmStatXEntry 1 }
gnMdmAcmStatXQamId OBJECT-TYPE
SYNTAX INTEGER {
acm4QAM(2),
acm8QAM(3),
acm16QAM(4),
acm32QAM(5),
acm64QAM(6),
acm128QAM(7),
acm256QAM(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates which QAM is involved in a specific row."
DEFVAL { acm4QAM }
::= { gnMdmAcmStatXEntry 2 }
gnMdmAcmStatXRoundedThroughput OBJECT-TYPE
SYNTAX INTEGER (0..1000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates on the rounded throuphput of a specific constellation."
DEFVAL { 155 }
::= { gnMdmAcmStatXEntry 3 }
gnMdmAcmStatXSupportedThroughput OBJECT-TYPE
SYNTAX INTEGER {
notSupport(2),
support(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates whether the specific constellation is supported."
DEFVAL { notSupport }
::= { gnMdmAcmStatXEntry 4 }
gnMdmMonitorX OBJECT IDENTIFIER ::= { gnMdm 7 }
gnMdmAcmMonitorX OBJECT IDENTIFIER ::= { gnMdmMonitorX 1 }
gnMdmAcmMonCurrXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMdmAcmMonCurrXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of the current 15 min interval."
::= { gnMdmAcmMonitorX 1 }
gnMdmAcmMonCurrXEntry OBJECT-TYPE
SYNTAX GnMdmAcmMonCurrXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Current Interval Table. This table
contains two rows, indexed by gnMdmAcmMonCurrXId= 3 for drawer1 modem and
gnMdmAcmMonCurrXId = 4 for drawer2 modem."
INDEX { gnMdmAcmMonCurrXId }
::= { gnMdmAcmMonCurrXTable 1 }
GnMdmAcmMonCurrXEntry ::=
SEQUENCE {
gnMdmAcmMonCurrXId
INTEGER,
gnMdmAcmMonCurrXMinConstellation
INTEGER,
gnMdmAcmMonCurrXMaxConstellation
INTEGER,
gnMdmAcmMonCurrXIDF
INTEGER,
gnMdmAcmMonCurrXDayMinConstellation
INTEGER,
gnMdmAcmMonCurrXDayMaxConstellation
INTEGER,
gnMdmAcmMonCurrXDayIDF
INTEGER
}
gnMdmAcmMonCurrXId OBJECT-TYPE
SYNTAX INTEGER
{
modem1(3),
modem2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnMdmAcmMonCurrXEntry 1 }
gnMdmAcmMonCurrXMinConstellation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum modem constellation in the current 15 minute interval."
::= { gnMdmAcmMonCurrXEntry 2 }
gnMdmAcmMonCurrXMaxConstellation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum modem constellation in the current 15 minute interval."
::= { gnMdmAcmMonCurrXEntry 3 }
gnMdmAcmMonCurrXIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag in current 15 minute interval."
DEFVAL { off }
::= { gnMdmAcmMonCurrXEntry 4 }
gnMdmAcmMonCurrXDayMinConstellation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum modem constellation in the last 24 hours."
::= { gnMdmAcmMonCurrXEntry 5}
gnMdmAcmMonCurrXDayMaxConstellation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum modem constellation in the last 24 hours."
::= { gnMdmAcmMonCurrXEntry 6}
gnMdmAcmMonCurrXDayIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag in in the last 24 hours."
DEFVAL { off }
::= { gnMdmAcmMonCurrXEntry 7 }
gnMdmAcmMonIntervalXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMdmAcmMonIntervalXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of the 96 last intervals of 15 min."
::= { gnMdmAcmMonitorX 2 }
gnMdmAcmMonIntervalXEntry OBJECT-TYPE
SYNTAX GnMdmAcmMonIntervalXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Interval Table. This table
is indexed by gnMdmAcmMonIntervalXId= 3 for drawer1 modem and
gnMdmAcmMonIntervalXId = 4 for drawer2 modem and by interval idx"
INDEX { gnMdmAcmMonIntervalXId, gnMdmAcmMonIntervalXIdx }
::= { gnMdmAcmMonIntervalXTable 1 }
GnMdmAcmMonIntervalXEntry ::=
SEQUENCE {
gnMdmAcmMonIntervalXId
INTEGER,
gnMdmAcmMonIntervalXIdx
INTEGER,
gnMdmAcmMonIntervalXMinConstellation
INTEGER,
gnMdmAcmMonIntervalXMaxConstellation
INTEGER,
gnMdmAcmMonIntervalXIDF
INTEGER
}
gnMdmAcmMonIntervalXId OBJECT-TYPE
SYNTAX INTEGER
{
modem1(3),
modem2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnMdmAcmMonIntervalXEntry 1 }
gnMdmAcmMonIntervalXIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interval number to which this row is related. "
::= { gnMdmAcmMonIntervalXEntry 2 }
gnMdmAcmMonIntervalXMinConstellation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum constellation in a 15 minutes interval"
::= { gnMdmAcmMonIntervalXEntry 3 }
gnMdmAcmMonIntervalXMaxConstellation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum constellation in a 15 minutes interval"
::= { gnMdmAcmMonIntervalXEntry 4 }
gnMdmAcmMonIntervalXIDF OBJECT-TYPE
SYNTAX INTEGER
{
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnMdmAcmMonIntervalXEntry 5 }
gnMdmAcmMonDayXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMdmAcmMonDayXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines/keeps the counters of 30 intervals of 24 hours."
::= { gnMdmAcmMonitorX 3 }
gnMdmAcmMonDayXEntry OBJECT-TYPE
SYNTAX GnMdmAcmMonDayXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Days Table. This table
is indexed by gnMdmAcmMonDayXId= 3 for drawer1 modem and
gnMdmAcmMonDayXId = 4 for drawer2 modem and by day idx.
gnMdmAcmMonDayIdx = 1 is one day from now,
gnMdmAcmMonDayIdx = 2 is two days from now, and so on..."
INDEX { gnMdmAcmMonDayXId, gnMdmAcmMonDayXIdx }
::= { gnMdmAcmMonDayXTable 1 }
GnMdmAcmMonDayXEntry ::=
SEQUENCE {
gnMdmAcmMonDayXId
INTEGER,
gnMdmAcmMonDayXIdx
INTEGER,
gnMdmAcmMonDayXMinConstellation
INTEGER,
gnMdmAcmMonDayXMaxConstellation
INTEGER,
gnMdmAcmMonDayXIDF
INTEGER
}
gnMdmAcmMonDayXId OBJECT-TYPE
SYNTAX INTEGER
{
modem1(3),
modem2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnMdmAcmMonDayXEntry 1 }
gnMdmAcmMonDayXIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interval number to which this row is related. "
::= { gnMdmAcmMonDayXEntry 2 }
gnMdmAcmMonDayXMinConstellation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The minimum modem constellation in a 24 hour interval."
::= { gnMdmAcmMonDayXEntry 3}
gnMdmAcmMonDayXMaxConstellation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum modem constellation in a 24 hour interval."
::= { gnMdmAcmMonDayXEntry 4}
gnMdmAcmMonDayXIDF OBJECT-TYPE
SYNTAX INTEGER
{
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnMdmAcmMonDayXEntry 5 }
-- This group contains the parameters concerning the SPI
gnSpi OBJECT IDENTIFIER ::= { gnIDU 2 }
gnSpiCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnSpiCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the SPI part
of the system."
::= { gnSpi 1 }
gnSpiCfgEntry OBJECT-TYPE
SYNTAX GnSpiCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the SPI Configuration Table. This table
contains two rows, indexed by ifIndex= 2 for local SPI and
ifIndex = 102 for remote SPI."
INDEX { ifIndex }
::= { gnSpiCfgTable 1 }
GnSpiCfgEntry ::=
SEQUENCE {
gnSpiCfgConnector
INTEGER
}
gnSpiCfgConnector OBJECT-TYPE
SYNTAX INTEGER {
nointerface(1),
fiber(2),
electrical(3),
utp(4),
stp(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The physical connector of the SPI - Used only in old regenerators "
DEFVAL { fiber }
::= { gnSpiCfgEntry 1 }
-- This group contains the parameters concerning the MUX
gnMux OBJECT IDENTIFIER ::= { gnIDU 3 }
-- This table is for parameters configuration of the regenerator
gnRstCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnRstCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the regenerator part
of the MUX."
::= { gnMux 1 }
gnRstCfgEntry OBJECT-TYPE
SYNTAX GnRstCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Regenerator part of the MUX Configuration Table.
This table contains a row for every interface which type is SONET(39).
for example regenerator on local and remote sides will have four entries
1,2 for local
IDU and 101 and 102 for remote IDU."
INDEX { ifIndex }
::= { gnRstCfgTable 1 }
GnRstCfgEntry ::=
SEQUENCE {
gnRstCfgTransmittedJ0
DisplayString,
gnRstCfgExpectedJ0
DisplayString,
gnRstCfgTransparencyJ0
INTEGER,
gnRstCfgRSTAISMode
INTEGER,
gnRstCfgRstEXCThresh
INTEGER,
gnRstCfgRstSDThresh
INTEGER,
gnRstCfgTransparencyE1
INTEGER,
gnRstCfgTransparencyF1
INTEGER,
gnRstCfgTransparencyUnscrambled
INTEGER,
gnRstCfgMngByteLocation
INTEGER,
gnRstCfgE1waysideChannel
INTEGER,
gnRstCfgTransparencyDCCR
INTEGER,
gnRstCfgTransparencyB1Chan
INTEGER,
gnRstCfgTestActivate
OCTET STRING,
gnRstCfgLoopbackOption
INTEGER
}
gnRstCfgTransmittedJ0 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the J0 string that would be sent. This string must be 15
characters in length."
DEFVAL {"J0 J0 J0 J0 J0 "}
::= { gnRstCfgEntry 1 }
gnRstCfgExpectedJ0 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the J0 string that is expected to be received. This string must be
15 characters in length."
DEFVAL {"J0 J0 J0 J0 J0 "}
::= { gnRstCfgEntry 2 }
gnRstCfgTransparencyJ0 OBJECT-TYPE
SYNTAX INTEGER {
active(2),
passthrough(3),
notActive(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Send the received J0 string transparently or send the Transmitted J0
configured string."
DEFVAL { passthrough }
::= { gnRstCfgEntry 3 }
gnRstCfgRSTAISMode OBJECT-TYPE
SYNTAX INTEGER {
sendAIS(2),
doNotSendAIS(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" In the case of a J0 mismatch error, send or don't send AIS."
DEFVAL { doNotSendAIS }
::= { gnRstCfgEntry 4 }
gnRstCfgRstEXCThresh OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If the bit error rate is higher than this threshold
an EXC alarm would be generated.
EXC is for excessive."
DEFVAL { tenExpMinus3}
::= { gnRstCfgEntry 5 }
gnRstCfgRstSDThresh OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus6(3),
tenExpMinus7(4),
tenExpMinus8(5),
tenExpMinus9(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If the bit error rate is higher than this threshold
a SD alarm would be generated.
SD is for Signal Degrade."
DEFVAL { tenExpMinus6}
::= { gnRstCfgEntry 6 }
gnRstCfgTransparencyE1 OBJECT-TYPE
SYNTAX INTEGER {
active(2),
passthrough(3),
disable(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transmit the order wire data received or terminate the E1 data received."
DEFVAL { active }
::= { gnRstCfgEntry 7 }
gnRstCfgTransparencyF1 OBJECT-TYPE
SYNTAX INTEGER {
active(2),
passthrough(3),
disable(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transmit the F1/User channel data received or terminate the F1/User channel data received.
set the TransparencyF1 to disable when the User channel used by In-Band management."
DEFVAL { active }
::= { gnRstCfgEntry 8 }
gnRstCfgTransparencyUnscrambled OBJECT-TYPE
SYNTAX INTEGER {
active(2),
passthrough(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transmit the unscrambled national bytes data received or terminate the
unscrambled national bytes data received."
DEFVAL { passthrough }
::= { gnRstCfgEntry 9 }
gnRstCfgMngByteLocation OBJECT-TYPE
SYNTAX INTEGER {
mediaSpecificBytes(2),
spareA1A0Bytes(3),
e1Byets(4),
noMngBytes(5),
dccr(6),
dccm(7),
userChannel(8),
waysideChannel(9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates which media specific bytes are in use and which
are transparent.
not currently supported"
DEFVAL { mediaSpecificBytes }
::= { gnRstCfgEntry 10 }
gnRstCfgE1waysideChannel OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
-- inband(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this parameter is enabled, an E1 wayside channel will be sent
through the network using the unused bytes in the SDH header."
DEFVAL { enabled }
::= { gnRstCfgEntry 11 }
gnRstCfgTransparencyDCCR OBJECT-TYPE
SYNTAX INTEGER {
active(2),
passthrough(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transmit on the DCCR channel or terminate the DCCR channel."
DEFVAL { passthrough }
::= { gnRstCfgEntry 12 }
gnRstCfgTransparencyB1Chan OBJECT-TYPE
SYNTAX INTEGER {
active(2),
passthrough(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Correct B1 byte or send transmit it transparently ."
DEFVAL { passthrough }
::= { gnRstCfgEntry 13 }
gnRstCfgTestActivate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field allows the NMS to activate the
following tests:
bit 1 = 1 Force AIS
bit 2 = 1 Force RDI."
::= { gnRstCfgEntry 14 }
gnRstCfgLoopbackOption OBJECT-TYPE
SYNTAX INTEGER {
noloopback(2),
interfaceInterLoop(3),
interfaceExterLoop(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter enable the user to activate a loopback ."
DEFVAL { noloopback }
::= { gnRstCfgEntry 15 }
gnRstStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnRstStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the status of the regenerator part
of the MUX."
::= { gnMux 2 }
gnRstStatEntry OBJECT-TYPE
SYNTAX GnRstStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Regenerator part of the MUX
Status Table. This table contains a row for every interface which type is
SONET(39)."
INDEX { ifIndex }
::= { gnRstStatTable 1 }
GnRstStatEntry ::=
SEQUENCE {
gnRstStatReceivedJ0
DisplayString,
gnRstStatBERCur
INTEGER,
gnRstStatStatus
OCTET STRING,
gnRstStatClearLoopTimer
INTEGER
}
gnRstStatReceivedJ0 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the J0 string received."
::= { gnRstStatEntry 1 }
gnRstStatBERCur OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4),
tenExpMinus6(5),
tenExpMinus7(6),
tenExpMinus8(7),
tenExpMinus9(8),
tenExpMinus10(9),
tenExpMinus11(10),
tenExpMinus12(11),
tenExpMinus13(12),
tenExpMinus14(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Current Bit Error Rate. "
::= { gnRstStatEntry 2 }
gnRstStatStatus OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" bit 2 = LOS
bit 3 = LOF
bit 7 = TIM
bit 9 = SD
bit 10 = EXC
bit 11 = UNEXP"
::= { gnRstStatEntry 3 }
gnRstStatClearLoopTimer OBJECT-TYPE
SYNTAX INTEGER (0..1440)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the remaining time (in minutes)
till the relevant loopback timer will be expired.
when starting a loopback and the value of gnGenCfgClearLoopTimeout is x,
the gnRstStatClearLoopTimer will be also x, after one minute it will be x-1, etc.
gnRstStatClearLoopTimer.1 is for the radio aggregate loopbacks,
gnRstStatClearLoopTimer.2 is for the line aggregate loopbacks"
::= { gnRstStatEntry 4 }
-- Statistics For Regenerator
gnRstMon OBJECT IDENTIFIER ::= { gnMux 3 }
gnRstMonCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnRstMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the regenerator part
of the MUX."
::= { gnRstMon 1 }
gnRstMonCurrEntry OBJECT-TYPE
SYNTAX GnRstMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Regenerator part of the MUX
Counters Table. This table contains a row for every interface which type
is SONET(39)."
INDEX { ifIndex }
::= { gnRstMonCurrTable 1 }
GnRstMonCurrEntry ::=
SEQUENCE {
--gnRstMonCurrES rfc1595
-- Counter,
--gnRstMonCurrSES
-- Counter,
gnRstMonCurrBBE
Gauge,
gnRstMonCurrUAS
Gauge,
--gnRstMonCurrOFS
-- Counter,
gnRstMonCurrLastDayES
Gauge,
gnRstMonCurrLastDaySES
Gauge,
gnRstMonCurrLastDayBBE
Gauge,
gnRstMonCurrLastDayUAS
Gauge,
gnRstMonCurrLastDayOFS
Gauge,
gnRstMonCurrLastDayIDF
INTEGER
}
gnRstMonCurrBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 15 minutes period."
::= { gnRstMonCurrEntry 1}
gnRstMonCurrUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 15 minutes period."
::= { gnRstMonCurrEntry 2}
gnRstMonCurrLastDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Errored Seconds
starting from the present 24 hours period."
::= { gnRstMonCurrEntry 3 }
gnRstMonCurrLastDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Severely Errored Seconds
starting from the present 24 hours period."
::= { gnRstMonCurrEntry 4 }
gnRstMonCurrLastDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 24 hours period."
::= { gnRstMonCurrEntry 5 }
gnRstMonCurrLastDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 24 hours period."
::= { gnRstMonCurrEntry 6 }
gnRstMonCurrLastDayOFS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Out Of Frame Seconds
starting from the present 24 hours period."
::= { gnRstMonCurrEntry 7}
gnRstMonCurrLastDayIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnRstMonCurrEntry 8 }
gnRstMonIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnRstMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the regenerator part
of the MUX per interval."
::= { gnRstMon 2 }
gnRstMonIntervalEntry OBJECT-TYPE
SYNTAX GnRstMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Regenerator part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39).
This table is indexed by an interval index, between 1
to 96 and representing each one 15 minutes.
The oldest is 96."
INDEX { ifIndex, gnRstMonIntervalIdx}
::= { gnRstMonIntervalTable 1 }
GnRstMonIntervalEntry ::=
SEQUENCE {
gnRstMonIntervalIdx
INTEGER,
--gnRstMonIntervalES
-- Counter,
--gnRstMonIntervalSES
-- Counter,
gnRstMonIntervalBBE
Gauge,
gnRstMonIntervalUAS
-- Counter,
--gnRstMonIntervalOFS
Gauge,
gnRstMonIntervalIDF
INTEGER
-- ,
-- gnRstMonIntervalTimeStampMonth
-- INTEGER,
-- gnRstMonIntervalTimeStampDay
-- INTEGER,
-- gnRstMonIntervalTimeStampHour
-- INTEGER,
-- gnRstMonIntervalTimeStampMinute
-- INTEGER
}
gnRstMonIntervalIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96."
::= { gnRstMonIntervalEntry 1 }
gnRstMonIntervalBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval."
::= { gnRstMonIntervalEntry 2}
gnRstMonIntervalUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds per interval."
::= { gnRstMonIntervalEntry 3}
gnRstMonIntervalIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnRstMonIntervalEntry 4 }
-- gnRstMonIntervalTimeStampMonth OBJECT-TYPE
-- SYNTAX INTEGER (1..12)
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "The Month of this interval time stamp.Not currently supported."
-- ::= { gnRstMonIntervalEntry 4 }
-- gnRstMonIntervalTimeStampDay OBJECT-TYPE
-- SYNTAX INTEGER (1..31)
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "The Day of this interval time stamp.Not currently supported."
-- ::= { gnRstMonIntervalEntry 5 }
-- gnRstMonIntervalTimeStampHour OBJECT-TYPE
-- SYNTAX INTEGER (0..23)
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "The Hour of this interval time stamp.Not currently supported."
-- ::= { gnRstMonIntervalEntry 6 }
-- gnRstMonIntervalTimeStampMinute OBJECT-TYPE
-- SYNTAX INTEGER (0..59)
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "The Minute of this interval time stamp.Not currently supported."
-- ::= { gnRstMonIntervalEntry 7 }
gnRstMonDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnRstMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the regenerator part
of the MUX per 24 hours interval."
::= { gnRstMon 3 }
gnRstMonDayEntry OBJECT-TYPE
SYNTAX GnRstMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Regenerator part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39).
This table is indexed by an interval index, between 1
to 30 and representing each one 24 hours.
The oldest is 30."
INDEX { ifIndex, gnRstMonDayIdx}
::= { gnRstMonDayTable 1 }
GnRstMonDayEntry ::=
SEQUENCE {
gnRstMonDayIdx
INTEGER,
gnRstMonDayES
Gauge,
gnRstMonDaySES
Gauge,
gnRstMonDayBBE
Gauge,
gnRstMonDayUAS
Gauge,
gnRstMonDayOFS
Gauge,
gnRstMonDayIDF
INTEGER
-- ,
-- gnRstMonDayTimeStampMonth
-- INTEGER,
-- gnRstMonDayTimeStampDay
-- INTEGER,
-- gnRstMonDayTimeStampHour
-- INTEGER,
-- gnRstMonDayTimeStampMinute
-- INTEGER
}
gnRstMonDayIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30."
::= { gnRstMonDayEntry 1 }
gnRstMonDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Errored Seconds per interval of 24 hours."
::= { gnRstMonDayEntry 2}
gnRstMonDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Severely Errored Seconds
per interval of 24 hours."
::= { gnRstMonDayEntry 3}
gnRstMonDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval of 24 hours."
::= { gnRstMonDayEntry 4 }
gnRstMonDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds
per interval of 24 hours."
::= { gnRstMonDayEntry 5 }
gnRstMonDayOFS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Out Of Frame Seconds
per interval of 24 hours."
::= { gnRstMonDayEntry 6}
gnRstMonDayIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnRstMonDayEntry 7 }
-- gnRstMonDayTimeStampMonth OBJECT-TYPE
-- SYNTAX INTEGER (1..12)
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "The Month of this interval time stamp.Not currently supported."
-- ::= { gnRstMonDayEntry 7 }
-- gnRstMonDayTimeStampDay OBJECT-TYPE
-- SYNTAX INTEGER (1..31)
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "The Day of this interval time stamp.Not currently supported."
-- ::= { gnRstMonDayEntry 8 }
-- gnRstMonDayTimeStampHour OBJECT-TYPE
-- SYNTAX INTEGER (0..23)
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "The Hour of this interval time stamp.Not currently supported."
-- ::= { gnRstMonDayEntry 9 }
-- gnRstMonDayTimeStampMinute OBJECT-TYPE
-- SYNTAX INTEGER (0..59)
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "The Minute of this interval time stamp.Not currently supported."
-- ::= { gnRstMonDayEntry 10 }
-- MST part of the MUX. All of the MST tables are included for future
-- development and are not currently implemented.
gnMstCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMstCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the MST part
of the MUX."
::= { gnMux 4 }
gnMstCfgEntry OBJECT-TYPE
SYNTAX GnMstCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the MST part of the MUX
Configuration Table. This table contains a row for every interface
which type is SONET(39)."
INDEX { ifIndex }
::= { gnMstCfgTable 1 }
GnMstCfgEntry ::=
SEQUENCE {
gnMstCfgEXCThresh
INTEGER,
gnMstCfgSDThresh
INTEGER
}
gnMstCfgEXCThresh OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If the bit error rate is higher than this threshold
an EXC alarm would be generated.
EXC is for excessive."
DEFVAL { tenExpMinus3}
::= { gnMstCfgEntry 1 }
gnMstCfgSDThresh OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus6(3),
tenExpMinus7(4),
tenExpMinus8(5),
tenExpMinus9(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If the bit error rate is higher than this threshold
a SD alarm would be generated.
SD is for Signal Degrade."
DEFVAL { tenExpMinus6}
::= { gnMstCfgEntry 2 }
gnMstStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMstStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the status of the MST part
of the MUX."
::= { gnMux 5 }
gnMstStatEntry OBJECT-TYPE
SYNTAX GnMstStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the MST part of the MUX
Status Table. This table contains a row for every interface which type is
SONET(39)."
INDEX { ifIndex }
::= { gnMstStatTable 1 }
GnMstStatEntry ::=
SEQUENCE {
gnMstStatReceivedS1
INTEGER,
gnMstStatStatus
OCTET STRING,
gnMstStatTransmitS1
INTEGER,
gnMstStatCurrentBer
INTEGER,
gnMstStatReceivedK1
INTEGER,
gnMstStatReceivedK2
INTEGER,
gnMstStatTransmitK1
INTEGER,
gnMstStatTransmitK2
INTEGER
}
gnMstStatReceivedS1 OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Received Synchronization status byte."
::= { gnMstStatEntry 1 }
gnMstStatStatus OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Alarm status. Bit 1 is MSB, bit=1 when alarm active.
bit 5 = RDI
bit 6 = AIS
bit 9 = SD
bit 10 = EXC
bit 16 = PAM (MSP)
bit 17 = SCM (MSP)
bit 18 = INV (MSP)
"
::= { gnMstStatEntry 2 }
gnMstStatTransmitS1 OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Transmitted Synchronization status byte."
::= { gnMstStatEntry 3 }
gnMstStatCurrentBer OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4),
tenExpMinus6(5),
tenExpMinus7(6),
tenExpMinus8(7),
tenExpMinus9(8),
tenExpMinus10(9),
tenExpMinus11(10),
tenExpMinus12(11),
tenExpMinus13(12),
tenExpMinus14(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnMstStatEntry 4 }
gnMstStatReceivedK1 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received K1 byte (Automatic Protection Switch message)."
::= { gnMstStatEntry 5 }
gnMstStatReceivedK2 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Received K2 byte (Automatic Protection Switch message)."
::= { gnMstStatEntry 6 }
gnMstStatTransmitK1 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted K1 byte (Automatic Protection Switch message)."
::= { gnMstStatEntry 7 }
gnMstStatTransmitK2 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmitted K2 byte (Automatic Protection Switch message)."
::= { gnMstStatEntry 8 }
-- Statistics For MST. All MST tables are included for future development
-- and are not currently implemented.
gnMstMon OBJECT IDENTIFIER ::= { gnMux 6 }
gnMstMonCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMstMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the MST part
of the MUX."
::= { gnMstMon 1 }
gnMstMonCurrEntry OBJECT-TYPE
SYNTAX GnMstMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the MST part of the MUX
Counters Table. This table contains a row for every interface which type
is SONET(39)."
INDEX { ifIndex }
::= { gnMstMonCurrTable 1 }
GnMstMonCurrEntry ::=
SEQUENCE {
--gnMstMonCurrES rfc1595
-- Counter,
--gnMstMonCurrSES
-- Counter,
gnMstMonCurrBBE
Gauge,
gnMstMonCurrUAS
Gauge,
gnMstMonCurrLastDayES
Gauge,
gnMstMonCurrLastDaySES
Gauge,
gnMstMonCurrLastDayBBE
Gauge,
gnMstMonCurrLastDayUAS
Gauge
}
gnMstMonCurrBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 15 minutes period."
::= { gnMstMonCurrEntry 1}
gnMstMonCurrUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 15 minutes period."
::= { gnMstMonCurrEntry 2}
gnMstMonCurrLastDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Errored Seconds
starting from the present 24 hours period."
::= { gnMstMonCurrEntry 3 }
gnMstMonCurrLastDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Severely Errored Seconds
starting from the present 24 hours period."
::= { gnMstMonCurrEntry 4 }
gnMstMonCurrLastDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 24 hours period."
::= { gnMstMonCurrEntry 5 }
gnMstMonCurrLastDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 24 hours period."
::= { gnMstMonCurrEntry 6 }
gnMstMonIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMstMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the MST part
of the MUX per interval."
::= { gnMstMon 2 }
gnMstMonIntervalEntry OBJECT-TYPE
SYNTAX GnMstMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the MST part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39).
This table is indexed by an interval index, between 1
to 96 and representing each one 15 minutes.
The oldest is 96."
INDEX { ifIndex, gnMstMonIntervalIdx}
::= { gnMstMonIntervalTable 1 }
GnMstMonIntervalEntry ::=
SEQUENCE {
gnMstMonIntervalIdx
INTEGER,
--gnMstMonIntervalES
-- Counter,
--gnMstMonIntervalSES
-- Counter,
gnMstMonIntervalBBE
Gauge,
gnMstMonIntervalUAS
Gauge
}
gnMstMonIntervalIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96."
::= { gnMstMonIntervalEntry 1 }
gnMstMonIntervalBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval."
::= { gnMstMonIntervalEntry 2}
gnMstMonIntervalUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds per interval."
::= { gnMstMonIntervalEntry 3}
gnMstMonDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMstMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the MST part
of the MUX per 24 hours interval."
::= { gnMstMon 3 }
gnMstMonDayEntry OBJECT-TYPE
SYNTAX GnMstMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the MST part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39).
This table is indexed by an interval index, between 1
to 30 and representing each one 24 hours.
The oldest is 30."
INDEX { ifIndex, gnMstMonDayIdx}
::= { gnMstMonDayTable 1 }
GnMstMonDayEntry ::=
SEQUENCE {
gnMstMonDayIdx
INTEGER,
gnMstMonDayES
Gauge,
gnMstMonDaySES
Gauge,
gnMstMonDayBBE
Gauge,
gnMstMonDayUAS
Gauge
}
gnMstMonDayIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30."
::= { gnMstMonDayEntry 1 }
gnMstMonDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Errored Seconds per interval of 24 hours."
::= { gnMstMonDayEntry 2}
gnMstMonDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Severely Errored Seconds
per interval of 24 hours."
::= { gnMstMonDayEntry 3}
gnMstMonDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval of 24 hours."
::= { gnMstMonDayEntry 4 }
gnMstMonDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds
per interval of 24 hours."
::= { gnMstMonDayEntry 5 }
gnMstFarEndMonCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMstFarEndMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the far end MST part of the MUX.
This Table is not supported."
::= { gnMstMon 4 }
gnMstFarEndMonCurrEntry OBJECT-TYPE
SYNTAX GnMstFarEndMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the far end MST part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39)."
INDEX { ifIndex }
::= { gnMstFarEndMonCurrTable 1 }
GnMstFarEndMonCurrEntry ::=
SEQUENCE {
--gnMstFarEndMonCurrES rfc1595
-- Counter,
--gnMstFarEndMonCurrSES
-- Counter,
gnMstFarEndMonCurrBBE
Gauge,
gnMstFarEndMonCurrUAS
Gauge,
gnMstFarEndMonCurrLastDayES
Gauge,
gnMstFarEndMonCurrLastDaySES
Gauge,
gnMstFarEndMonCurrLastDayBBE
Gauge,
gnMstFarEndMonCurrLastDayUAS
Gauge
}
gnMstFarEndMonCurrBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 15 minutes period."
::= { gnMstFarEndMonCurrEntry 1}
gnMstFarEndMonCurrUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 15 minutes period."
::= { gnMstFarEndMonCurrEntry 2}
gnMstFarEndMonCurrLastDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Errored Seconds
starting from the present 24 hours period."
::= { gnMstFarEndMonCurrEntry 3 }
gnMstFarEndMonCurrLastDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Severely Errored Seconds
starting from the present 24 hours period."
::= { gnMstFarEndMonCurrEntry 4 }
gnMstFarEndMonCurrLastDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 24 hours period."
::= { gnMstFarEndMonCurrEntry 5 }
gnMstFarEndMonCurrLastDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 24 hours period."
::= { gnMstFarEndMonCurrEntry 6 }
gnMstFarEndMonIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMstFarEndMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the far end MST part
of the MUX per interval.
This Table is not supported."
::= { gnMstMon 5 }
gnMstFarEndMonIntervalEntry OBJECT-TYPE
SYNTAX GnMstFarEndMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the far end MST part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39)
This table is indexed by an interval index, between 1
to 96 and representing each one 15 minutes.
The oldest is 96."
INDEX { ifIndex, gnMstFarEndMonIntervalIdx}
::= { gnMstFarEndMonIntervalTable 1 }
GnMstFarEndMonIntervalEntry ::=
SEQUENCE {
gnMstFarEndMonIntervalIdx
INTEGER,
--gnMstFarEndMonIntervalES
-- Counter,
--gnMstFarEndMonIntervalSES
-- Counter,
gnMstFarEndMonIntervalBBE
Gauge,
gnMstFarEndMonIntervalUAS
Gauge
}
gnMstFarEndMonIntervalIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96."
::= { gnMstFarEndMonIntervalEntry 1 }
gnMstFarEndMonIntervalBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval."
::= { gnMstFarEndMonIntervalEntry 2}
gnMstFarEndMonIntervalUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds per interval."
::= { gnMstFarEndMonIntervalEntry 3}
gnMstFarEndMonDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMstFarEndMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the far end MST part
of the MUX per 24 hours interval.
This Table is not supported."
::= { gnMstMon 6 }
gnMstFarEndMonDayEntry OBJECT-TYPE
SYNTAX GnMstFarEndMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the far end MST part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39).
This table is indexed by an interval index, between 1
to 30 and representing each one 24 hours.
The oldest is 30."
INDEX { ifIndex, gnMstFarEndMonDayIdx}
::= { gnMstFarEndMonDayTable 1 }
GnMstFarEndMonDayEntry ::=
SEQUENCE {
gnMstFarEndMonDayIdx
INTEGER,
gnMstFarEndMonDayES
Gauge,
gnMstFarEndMonDaySES
Gauge,
gnMstFarEndMonDayBBE
Gauge,
gnMstFarEndMonDayUAS
Gauge
}
gnMstFarEndMonDayIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30."
::= { gnMstFarEndMonDayEntry 1 }
gnMstFarEndMonDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Errored Seconds per interval of 24 hours."
::= { gnMstFarEndMonDayEntry 2}
gnMstFarEndMonDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Severely Errored Seconds
per interval of 24 hours."
::= { gnMstFarEndMonDayEntry 3}
gnMstFarEndMonDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval of 24 hours."
::= { gnMstFarEndMonDayEntry 4 }
gnMstFarEndMonDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds
per interval of 24 hours."
::= { gnMstFarEndMonDayEntry 5 }
-- HPT part of the MUX. All HPT tables are included for future development
-- and are not currently implemented.
gnHptCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnHptCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the HPT part
of the MUX."
::= { gnMux 7 }
gnHptCfgEntry OBJECT-TYPE
SYNTAX GnHptCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the HPT part of the MUX
Configuration Table. This table contains an interface index for every
interface
which type is PATH(50, according to RFC1573)."
INDEX { ifIndex }
::= { gnHptCfgTable 1 }
GnHptCfgEntry ::=
SEQUENCE {
gnHptCfgTransmittedJ1
DisplayString,
gnHptCfgExpectedJ1
DisplayString,
gnHptCfgMismatchJ1
INTEGER,
gnHptCfgTransparencyJ1
INTEGER,
gnHptCfgEXCThresh
INTEGER,
gnHptCfgSDThresh
INTEGER,
gnHptCfgTug3Structure1
OCTET STRING,
gnHptCfgTug3Structure2
OCTET STRING,
gnHptCfgTug3Structure3
OCTET STRING,
gnHptCfgSignalLabelMismatch
INTEGER,
gnHptCfgTrailPT1
OCTET STRING,
gnHptCfgTrailPT2
OCTET STRING,
gnHptCfgTrailPT3
OCTET STRING
}
gnHptCfgTransmittedJ1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the J1 string that would be sent."
DEFVAL { " ACCESS MUX " }
::= { gnHptCfgEntry 1 }
gnHptCfgExpectedJ1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the J1 string that is expected to be received."
DEFVAL { " ACCESS MUX " }
::= { gnHptCfgEntry 2 }
gnHptCfgMismatchJ1 OBJECT-TYPE
SYNTAX INTEGER{
sendAlarm(2),
sendAIS(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" In case of a J1 mismatch error, send or don't send AIS."
DEFVAL { sendAlarm }
::= { gnHptCfgEntry 3 }
gnHptCfgTransparencyJ1 OBJECT-TYPE
SYNTAX INTEGER {
active(2),
passthrough(3),
notActive(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Send the received J1 string transparently or send the Transmitted J1
configured string."
DEFVAL { passthrough }
::= { gnHptCfgEntry 4 }
gnHptCfgEXCThresh OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If the bit error rate is higher than this threshold
an EXC alarm would be generated.
EXC is for excessive."
DEFVAL { tenExpMinus3}
::= { gnHptCfgEntry 5 }
gnHptCfgSDThresh OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus6(3),
tenExpMinus7(4),
tenExpMinus8(5),
tenExpMinus9(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If the bit error rate is higher than this threshold
a SD alarm would be generated.
SD is for Signal Degrade."
DEFVAL { tenExpMinus6}
::= { gnHptCfgEntry 6 }
gnHptCfgTug3Structure1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field set the TUG-3 #1 structure: (hexadecimal number)
the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG3 #1. (the K of the KLM index is 1)
for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12
to be blocked (bit is 0) or unblocked (bit is 1).
if it is VC3 only one more bit indicates if it is blocked (0) or unblocked (1).
if a VC12 is set to blocked (this is the default) the system will send TU-AIS in that VC12.
it it is unblocked it will be path-through or mapped to a E1/T1 port (according to the gnAccessCfgLowPathIndex).
the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index),
the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4.
Example : SDH, VC12 strcture, blocked VCs: KLM=111,121 (M=1), 112,122 (M=2), 163,173 (M=3), unblocked VCs: all the other.
the value in bits will be: 0011111 1111100 1111100 0000, and in Hexadecimal: 0x7FE7C0. (so enter: 00 7F E7 C0)."
::= { gnHptCfgEntry 7 }
gnHptCfgTug3Structure2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field set the TUG-3 #2 structure: (hexadecimal number)
the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #2. (the K of the KLM index is 2)
for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12
to be blocked (bit is 0) or unblocked (bit is 1).
if it is VC3 only one more bit indicates if it is blocked (0) or unblocked (1).
if a VC12 is set to blocked (this is the default) the system will send TU-AIS in that VC12.
it it is unblocked it will be path-through or mapped to a E1/T1 port (according to the gnAccessCfgLowPathIndex).
the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index),
the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4.
Example : SDH, VC12 strcture, blocked VCs: KLM=211,221 (M=1), 212,222 (M=2), 263,273 (M=3), unblocked VCs: all the other.
the value in bits will be: 0011111 1111100 1111100 0000, and in Hexadecimal: 0x7FE7C0. (so enter: 00 7F E7 C0)."
::= { gnHptCfgEntry 8 }
gnHptCfgTug3Structure3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field set the TUG-3 #3 structure: (hexadecimal number)
the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #3. (the K of the KLM index is 3)
for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12
to be blocked (bit is 0) or unblocked (bit is 1).
if it is VC3 only one more bit indicates if it is blocked (0) or unblocked (1).
if a VC12 is set to blocked (this is the default) the system will send TU-AIS in that VC12.
it it is unblocked it will be path-through or mapped to a E1/T1 port (according to the gnAccessCfgLowPathIndex).
the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index),
the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4.
Example : SDH, VC12 strcture, blocked VCs: KLM=311,321 (M=1), 312,322 (M=2), 363,373 (M=3), unblocked VCs: all the other.
the value in bits will be: 0011111 1111100 1111100 0000, and in Hexadecimal: 0x7FE7C0. (so enter: 00 7F E7 C0)."
::= { gnHptCfgEntry 9 }
gnHptCfgSignalLabelMismatch OBJECT-TYPE
SYNTAX INTEGER{
sendAlarm(2),
sendAIS(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" In case of a C2 mismatch error, send or don't send AIS."
DEFVAL { sendAlarm }
::= { gnHptCfgEntry 10 }
gnHptCfgTrailPT1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field set the TUG-3 #1 Trails Pass Through (hexadecimal number)
It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the
last in the configuration chain.
the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #1.
for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12
to be blocked (bit is 0) or unblocked (bit is 1).
if it is VC3 only one more bit indicates if it is Pass-Through disabled (0, default) or Pass-Through enabled (1).
if it is VC12, the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index),
the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4."
::= { gnHptCfgEntry 11 }
gnHptCfgTrailPT2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field set the TUG-3 #2 Trails Pass Through (hexadecimal number).
It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the
last in the configuration chain.
the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #2.
for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12
to be blocked (bit is 0) or unblocked (bit is 1).
if it is VC3 only one more bit indicates if it is Pass-Through disabled (0, default) or Pass-Through enabled (1).
if it is VC12, the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index),
the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4."
::= { gnHptCfgEntry 12 }
gnHptCfgTrailPT3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field set the TUG-3 #3 Trails Pass Through (hexadecimal number)
It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the
last in the configuration chain.
the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #3.
for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12
to be blocked (bit is 0) or unblocked (bit is 1).
if it is VC3 only one more bit indicates if it is Pass-Through disabled (0, default) or Pass-Through enabled (1).
if it is VC12, the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index),
the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4."
::= { gnHptCfgEntry 13 }
gnHptStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnHptStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the status of the HPT part
of the MUX."
::= { gnMux 8 }
gnHptStatEntry OBJECT-TYPE
SYNTAX GnHptStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the HPT part of the MUX
Status Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573)."
INDEX { ifIndex }
::= { gnHptStatTable 1 }
GnHptStatEntry ::=
SEQUENCE {
gnHptStatReceivedJ1
DisplayString,
gnHptStatStatus
OCTET STRING,
-- gnHptStatFarEndStatus
-- OCTET STRING,
gnHptStatCurrentBer
INTEGER,
gnHptStatFarEndCurrentBer
INTEGER,
gnHptStatReceivedSignalLabel
OCTET STRING
}
gnHptStatReceivedJ1 OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the J1 string that was received."
::= { gnHptStatEntry 1 }
gnHptStatStatus OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm status byte. Bit 1 is MSB, bit=1 when alarm active.
bit 4 = LOP
bit 5 = RDI
bit 6 = AIS
bit 7 = TIM
bit 8 = SLM/PLM
bit 9 = SD
bit 10 = EXC
bit 12 = UNEQ
bit 15 = LOM"
::= { gnHptStatEntry 2 }
--gnHptStatFarEndStatus OBJECT-TYPE
-- SYNTAX OCTET STRING(SIZE(2))
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "Alarm status byte. Bit 1 is MSB, bit=1 when alarm active.
-- bit 5 = RDI"
-- ::= { gnHptStatEntry 3 }
gnHptStatCurrentBer OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4),
tenExpMinus6(5),
tenExpMinus7(6),
tenExpMinus8(7),
tenExpMinus9(8),
tenExpMinus10(9),
tenExpMinus11(10),
tenExpMinus12(11),
tenExpMinus13(12),
tenExpMinus14(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnHptStatEntry 3 }
gnHptStatFarEndCurrentBer OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4),
tenExpMinus6(5),
tenExpMinus7(6),
tenExpMinus8(7),
tenExpMinus9(8),
tenExpMinus10(9),
tenExpMinus11(10),
tenExpMinus12(11),
tenExpMinus13(12),
tenExpMinus14(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnHptStatEntry 4 }
gnHptStatReceivedSignalLabel OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the C2 string that was received."
::= { gnHptStatEntry 5 }
-- Statistics For HPT. All HPT tables are included for future development
-- and are not currently implemented.
gnHptMon OBJECT IDENTIFIER ::= { gnMux 9 }
gnHptMonCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnHptMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the HPT part
of the MUX."
::= { gnHptMon 1 }
gnHptMonCurrEntry OBJECT-TYPE
SYNTAX GnHptMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the HPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573)."
INDEX { ifIndex }
::= { gnHptMonCurrTable 1 }
GnHptMonCurrEntry ::=
SEQUENCE {
--gnHptMonCurrES rfc1595
-- Counter,
--gnHptMonCurrSES
-- Counter,
gnHptMonCurrBBE
Gauge,
gnHptMonCurrUAS
Gauge,
gnHptMonCurrLastDayES
Gauge,
gnHptMonCurrLastDaySES
Gauge,
gnHptMonCurrLastDayBBE
Gauge,
gnHptMonCurrLastDayUAS
Gauge
}
gnHptMonCurrBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 15 minutes period."
::= { gnHptMonCurrEntry 1}
gnHptMonCurrUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 15 minutes period."
::= { gnHptMonCurrEntry 2}
gnHptMonCurrLastDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Errored Seconds
starting from the present 24 hours period."
::= { gnHptMonCurrEntry 3 }
gnHptMonCurrLastDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Severely Errored Seconds
starting from the present 24 hours period."
::= { gnHptMonCurrEntry 4 }
gnHptMonCurrLastDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 24 hours period."
::= { gnHptMonCurrEntry 5 }
gnHptMonCurrLastDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 24 hours period."
::= { gnHptMonCurrEntry 6 }
gnHptMonIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnHptMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the HPT part
of the MUX per interval."
::= { gnHptMon 2 }
gnHptMonIntervalEntry OBJECT-TYPE
SYNTAX GnHptMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the HPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573).
This table is indexed by an interval index, between 1
to 96 and representing each one 15 minutes.
The oldest is 96."
INDEX { ifIndex, gnHptMonIntervalIdx}
::= { gnHptMonIntervalTable 1 }
GnHptMonIntervalEntry ::=
SEQUENCE {
gnHptMonIntervalIdx
INTEGER,
--gnHptMonIntervalES
-- Counter,
--gnHptMonIntervalSES
-- Counter,
gnHptMonIntervalBBE
Gauge,
gnHptMonIntervalUAS
Gauge
}
gnHptMonIntervalIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96."
::= { gnHptMonIntervalEntry 1 }
gnHptMonIntervalBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval."
::= { gnHptMonIntervalEntry 2}
gnHptMonIntervalUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds per interval."
::= { gnHptMonIntervalEntry 3}
gnHptMonDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnHptMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the HPT part
of the MUX per 24 hours interval."
::= { gnHptMon 3 }
gnHptMonDayEntry OBJECT-TYPE
SYNTAX GnHptMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the HPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573).
This table is indexed by an interval index, between 1
to 30 and representing each one 24 hours.
The oldest is 30."
INDEX { ifIndex, gnHptMonDayIdx}
::= { gnHptMonDayTable 1 }
GnHptMonDayEntry ::=
SEQUENCE {
gnHptMonDayIdx
INTEGER,
gnHptMonDayES
Gauge,
gnHptMonDaySES
Gauge,
gnHptMonDayBBE
Gauge,
gnHptMonDayUAS
Gauge
}
gnHptMonDayIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30."
::= { gnHptMonDayEntry 1 }
gnHptMonDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Errored Seconds per interval of 24 hours."
::= { gnHptMonDayEntry 2}
gnHptMonDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Severely Errored Seconds
per interval of 24 hours."
::= { gnHptMonDayEntry 3}
gnHptMonDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval of 24 hours."
::= { gnHptMonDayEntry 4 }
gnHptMonDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds
per interval of 24 hours."
::= { gnHptMonDayEntry 5 }
gnHptFarEndMonCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnHptFarEndMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the far end HPT part
of the MUX."
::= { gnHptMon 4 }
gnHptFarEndMonCurrEntry OBJECT-TYPE
SYNTAX GnHptFarEndMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the far end HPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573)."
INDEX { ifIndex }
::= { gnHptFarEndMonCurrTable 1 }
GnHptFarEndMonCurrEntry ::=
SEQUENCE {
--gnHptFarEndMonCurrES rfc1595
-- Counter,
--gnHptFarEndMonCurrSES
-- Counter,
gnHptFarEndMonCurrBBE
Gauge,
gnHptFarEndMonCurrUAS
Gauge,
gnHptFarEndMonCurrLastDayES
Gauge,
gnHptFarEndMonCurrLastDaySES
Gauge,
gnHptFarEndMonCurrLastDayBBE
Gauge,
gnHptFarEndMonCurrLastDayUAS
Gauge
}
gnHptFarEndMonCurrBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 15 minutes period."
::= { gnHptFarEndMonCurrEntry 1}
gnHptFarEndMonCurrUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 15 minutes period."
::= { gnHptFarEndMonCurrEntry 2}
gnHptFarEndMonCurrLastDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Errored Seconds
starting from the present 24 hours period."
::= { gnHptFarEndMonCurrEntry 3 }
gnHptFarEndMonCurrLastDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Severely Errored Seconds
starting from the present 24 hours period."
::= { gnHptFarEndMonCurrEntry 4 }
gnHptFarEndMonCurrLastDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 24 hours period."
::= { gnHptFarEndMonCurrEntry 5 }
gnHptFarEndMonCurrLastDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 24 hours period."
::= { gnHptFarEndMonCurrEntry 6 }
gnHptFarEndMonIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnHptFarEndMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the far end HPT part
of the MUX per interval."
::= { gnHptMon 5 }
gnHptFarEndMonIntervalEntry OBJECT-TYPE
SYNTAX GnHptFarEndMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the far end HPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573).
This table is indexed by an interval index, between 1
to 96 and representing each one 15 minutes.
The oldest is 96."
INDEX { ifIndex, gnHptFarEndMonIntervalIdx}
::= { gnHptFarEndMonIntervalTable 1 }
GnHptFarEndMonIntervalEntry ::=
SEQUENCE {
gnHptFarEndMonIntervalIdx
INTEGER,
--gnHptFarEndMonIntervalES
-- Counter,
--gnHptFarEndMonIntervalSES
-- Counter,
gnHptFarEndMonIntervalBBE
Gauge,
gnHptFarEndMonIntervalUAS
Gauge
}
gnHptFarEndMonIntervalIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96."
::= { gnHptFarEndMonIntervalEntry 1 }
gnHptFarEndMonIntervalBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval."
::= { gnHptFarEndMonIntervalEntry 2}
gnHptFarEndMonIntervalUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds per interval."
::= { gnHptFarEndMonIntervalEntry 3}
gnHptFarEndMonDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnHptFarEndMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the far end HPT part
of the MUX per 24 hours interval."
::= { gnHptMon 6 }
gnHptFarEndMonDayEntry OBJECT-TYPE
SYNTAX GnHptFarEndMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the far end HPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573).
This table is indexed by an interval index, between 1
to 30 and representing each one 24 hours.
The oldest is 30."
INDEX { ifIndex, gnHptFarEndMonDayIdx}
::= { gnHptFarEndMonDayTable 1 }
GnHptFarEndMonDayEntry ::=
SEQUENCE {
gnHptFarEndMonDayIdx
INTEGER,
gnHptFarEndMonDayES
Gauge,
gnHptFarEndMonDaySES
Gauge,
gnHptFarEndMonDayBBE
Gauge,
gnHptFarEndMonDayUAS
Gauge
}
gnHptFarEndMonDayIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30."
::= { gnHptFarEndMonDayEntry 1 }
gnHptFarEndMonDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Errored Seconds per interval of 24 hours."
::= { gnHptFarEndMonDayEntry 2}
gnHptFarEndMonDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Severely Errored Seconds
per interval of 24 hours."
::= { gnHptFarEndMonDayEntry 3}
gnHptFarEndMonDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval of 24 hours."
::= { gnHptFarEndMonDayEntry 4 }
gnHptFarEndMonDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds
per interval of 24 hours."
::= { gnHptFarEndMonDayEntry 5 }
-- LPT part of the MUX. All LPT tables are included for future development
-- and are not currently implemented.
gnLptCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnLptCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the LPT part
of the MUX."
::= { gnMux 10 }
gnLptCfgEntry OBJECT-TYPE
SYNTAX GnLptCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the LPT part of the MUX
Configuration Table. This table contains an interface index for every
interface which type is VT(51, according to RFC1573)."
INDEX { ifIndex }
::= { gnLptCfgTable 1 }
GnLptCfgEntry ::=
SEQUENCE {
-- gnLptCfgTransmittedC2
-- INTEGER,
-- gnLptCfgExpectedC2
-- INTEGER,
-- gnLptCfgMismatchC2
-- INTEGER,
-- gnLptCfgTransmittedJ1
-- DisplayString,
-- gnLptCfgExpectedJ1
-- DisplayString,
-- gnLptCfgMismatchJ1
-- INTEGER,
gnLptCfgEXCThresh
INTEGER,
gnLptCfgSDThresh
INTEGER
}
--gnLptCfgTransmittedC2 OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "This is the C2 byte that would be sent."
-- DEFVAL { '02'H}
-- ::= { gnLptCfgEntry 1 }
--gnLptCfgExpectedC2 OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "This is the C2 byte that is expected to be received."
-- DEFVAL { '02'H}
-- ::= { gnLptCfgEntry 2 }
--gnLptCfgMismatchC2 OBJECT-TYPE
-- SYNTAX INTEGER{
-- sendAIS(2),
-- doNotSendAIS(3)
-- }
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- " In case of C2 mismatch error, send or don't send AIS."
-- DEFVAL { sendAIS }
-- ::= { gnLptCfgEntry 3 }
--gnLptCfgTransmittedJ1 OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(0..63))
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "This is the J1 string that would be sent."
-- DEFVAL { "" }
-- ::= { gnLptCfgEntry 4 }
--gnLptCfgExpectedJ1 OBJECT-TYPE
-- SYNTAX DisplayString(SIZE(0..63))
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "This is the J1 string that is expected to be received."
-- DEFVAL { "" }
-- ::= { gnLptCfgEntry 5 }
--gnLptCfgMismatchJ1 OBJECT-TYPE
-- SYNTAX INTEGER{
-- transparency(2),
-- sendAlarm(3),
-- sendAIS(4)
-- }
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- " In case of J1 mismatch error send or don't send AIS."
-- DEFVAL { transparency }
-- ::= { gnLptCfgEntry 6 }
-- NOT IMPLEMENTED (access):
gnLptCfgEXCThresh OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If the bit error rate is higher than this threshold
an alarm would be generated.
EXC is for excessive."
DEFVAL { tenExpMinus3}
::= { gnLptCfgEntry 1 }
gnLptCfgSDThresh OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus6(3),
tenExpMinus7(4),
tenExpMinus8(5),
tenExpMinus9(6),
notActive(15)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If the bit error rate is higher than this threshold
an alarm would be generated.
SD is for Signal Degrade."
DEFVAL { tenExpMinus6}
::= { gnLptCfgEntry 2 }
gnLptStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnLptStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the status of the LPT part
of the MUX."
::= { gnMux 11 }
gnLptStatEntry OBJECT-TYPE
SYNTAX GnLptStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the LPT part of the MUX
Status Table. This table contains an interface index for every interface
which type is VT(51, according to RFC1573)."
INDEX { ifIndex }
::= { gnLptStatTable 1 }
GnLptStatEntry ::=
SEQUENCE {
gnLptStatReceivedJ2
DisplayString,
gnLptStatStatus
OCTET STRING,
-- gnLptStatFarEndStatus
-- OCTET STRING,
gnLptStatProtectionMode
INTEGER,
gnLptStatCurrentBer
INTEGER,
gnLptStatFarEndCurrentBer
INTEGER,
gnLptStatReceivedSignalLabel
OCTET STRING,
gnLptStatKLM
INTEGER
}
gnLptStatReceivedJ2 OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the J2 string that was received."
::= { gnLptStatEntry 1 }
gnLptStatStatus OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm status byte. Bit 1 is MSB, bit=1 when alarm active.
bit 4 = LOP
bit 5 = RDI
bit 6 = AIS
bit 7 = TIM
bit 8 = SLM/PLM
bit 9 = SD
bit 10 = EXC
bit 12 = UNEQ"
::= { gnLptStatEntry 2 }
--gnLptStatFarEndStatus OBJECT-TYPE
-- SYNTAX OCTET STRING(SIZE(2))
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "bit 5 = RDI"
-- ::= { gnLptStatEntry 3 }
gnLptStatProtectionMode OBJECT-TYPE
SYNTAX INTEGER {
working(2),
protect(3),
passthrough(4),
notActive(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnLptStatEntry 3 }
gnLptStatCurrentBer OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4),
tenExpMinus6(5),
tenExpMinus7(6),
tenExpMinus8(7),
tenExpMinus9(8),
tenExpMinus10(9),
tenExpMinus11(10),
tenExpMinus12(11),
tenExpMinus13(12),
tenExpMinus14(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnLptStatEntry 4 }
gnLptStatFarEndCurrentBer OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4),
tenExpMinus6(5),
tenExpMinus7(6),
tenExpMinus8(7),
tenExpMinus9(8),
tenExpMinus10(9),
tenExpMinus11(10),
tenExpMinus12(11),
tenExpMinus13(12),
tenExpMinus14(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnLptStatEntry 5 }
gnLptStatReceivedSignalLabel OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"These are bits 1..3 of the V5 string that was received
(bit 0 is the lsb)."
::= { gnLptStatEntry 6 }
gnLptStatKLM OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnLptStatEntry 7 }
gnLptMon OBJECT IDENTIFIER ::= { gnMux 12 }
gnLptMonCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnLptMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the LPT part
of the MUX."
::= { gnLptMon 1 }
gnLptMonCurrEntry OBJECT-TYPE
SYNTAX GnLptMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the LPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is VT(51, according to RFC1573)."
INDEX { ifIndex }
::= { gnLptMonCurrTable 1 }
GnLptMonCurrEntry ::=
SEQUENCE {
--gnLptMonCurrES rfc1595
-- Counter,
--gnLptMonCurrSES
-- Counter,
gnLptMonCurrBBE
Gauge,
gnLptMonCurrUAS
Gauge,
gnLptMonCurrLastDayES
Gauge,
gnLptMonCurrLastDaySES
Gauge,
gnLptMonCurrLastDayBBE
Gauge,
gnLptMonCurrLastDayUAS
Gauge
}
gnLptMonCurrBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 15 minutes period."
::= { gnLptMonCurrEntry 1}
gnLptMonCurrUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 15 minutes period."
::= { gnLptMonCurrEntry 2}
gnLptMonCurrLastDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Errored Seconds
starting from the present 24 hours period."
::= { gnLptMonCurrEntry 3 }
gnLptMonCurrLastDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Severely Errored Seconds
starting from the present 24 hours period."
::= { gnLptMonCurrEntry 4 }
gnLptMonCurrLastDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 24 hours period."
::= { gnLptMonCurrEntry 5 }
gnLptMonCurrLastDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 24 hours period."
::= { gnLptMonCurrEntry 6 }
gnLptMonIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnLptMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the LPT part
of the MUX per interval."
::= { gnLptMon 2 }
gnLptMonIntervalEntry OBJECT-TYPE
SYNTAX GnLptMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the LPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is VT(51, according to RFC1573).
This table is indexed by an interval index, between 1
to 96 and representing each one 15 minutes.
The oldest is 96."
INDEX { ifIndex, gnLptMonIntervalIdx}
::= { gnLptMonIntervalTable 1 }
GnLptMonIntervalEntry ::=
SEQUENCE {
gnLptMonIntervalIdx
INTEGER,
--gnLptMonIntervalES
-- Counter,
--gnLptMonIntervalSES
-- Counter,
gnLptMonIntervalBBE
Gauge,
gnLptMonIntervalUAS
Gauge
}
gnLptMonIntervalIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96."
::= { gnLptMonIntervalEntry 1 }
gnLptMonIntervalBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval."
::= { gnLptMonIntervalEntry 2}
gnLptMonIntervalUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds per interval."
::= { gnLptMonIntervalEntry 3}
gnLptMonDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnLptMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the LPT part
of the MUX per 24 hours interval."
::= { gnLptMon 3 }
gnLptMonDayEntry OBJECT-TYPE
SYNTAX GnLptMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the LPT part of the MUX
Counters Table. This table contains four groups of rows,
indexed by ifIndex= 1,2 for local IDU and
ifIndex = 101 and 102 for remote IDU.
This table is indexed by an interval index, between 1
to 30 and representing each one 24 hours.
The oldest is 30."
INDEX { ifIndex, gnLptMonDayIdx}
::= { gnLptMonDayTable 1 }
GnLptMonDayEntry ::=
SEQUENCE {
gnLptMonDayIdx
INTEGER,
gnLptMonDayES
Gauge,
gnLptMonDaySES
Gauge,
gnLptMonDayBBE
Gauge,
gnLptMonDayUAS
Gauge
}
gnLptMonDayIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30."
::= { gnLptMonDayEntry 1 }
gnLptMonDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Errored Seconds per interval of 24 hours."
::= { gnLptMonDayEntry 2}
gnLptMonDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Severely Errored Seconds
per interval of 24 hours."
::= { gnLptMonDayEntry 3}
gnLptMonDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval of 24 hours."
::= { gnLptMonDayEntry 4 }
gnLptMonDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds
per interval of 24 hours."
::= { gnLptMonDayEntry 5 }
gnLptFarEndMonCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnLptFarEndMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the far end LPT part
of the MUX."
::= { gnLptMon 4 }
gnLptFarEndMonCurrEntry OBJECT-TYPE
SYNTAX GnLptFarEndMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the far end LPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is VT(51, according to RFC1573)."
INDEX { ifIndex }
::= { gnLptFarEndMonCurrTable 1 }
GnLptFarEndMonCurrEntry ::=
SEQUENCE {
--gnLptFarEndMonCurrES rfc1595
-- Counter,
--gnLptFarEndMonCurrSES
-- Counter,
gnLptFarEndMonCurrBBE
Gauge,
gnLptFarEndMonCurrUAS
Gauge,
gnLptFarEndMonCurrLastDayES
Gauge,
gnLptFarEndMonCurrLastDaySES
Gauge,
gnLptFarEndMonCurrLastDayBBE
Gauge,
gnLptFarEndMonCurrLastDayUAS
Gauge
}
gnLptFarEndMonCurrBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 15 minutes period."
::= { gnLptFarEndMonCurrEntry 1}
gnLptFarEndMonCurrUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 15 minutes period."
::= { gnLptFarEndMonCurrEntry 2}
gnLptFarEndMonCurrLastDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Errored Seconds
starting from the present 24 hours period."
::= { gnLptFarEndMonCurrEntry 3 }
gnLptFarEndMonCurrLastDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Severely Errored Seconds
starting from the present 24 hours period."
::= { gnLptFarEndMonCurrEntry 4 }
gnLptFarEndMonCurrLastDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 24 hours period."
::= { gnLptFarEndMonCurrEntry 5 }
gnLptFarEndMonCurrLastDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 24 hours period."
::= { gnLptFarEndMonCurrEntry 6 }
gnLptFarEndMonIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnLptFarEndMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the far end LPT part
of the MUX per interval."
::= { gnLptMon 5 }
gnLptFarEndMonIntervalEntry OBJECT-TYPE
SYNTAX GnLptFarEndMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the far end LPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is VT(51, according to RFC1573).
This table is indexed by an interval index, between 1
to 96 and representing each one 15 minutes.
The oldest is 96."
INDEX { ifIndex, gnLptFarEndMonIntervalIdx}
::= { gnLptFarEndMonIntervalTable 1 }
GnLptFarEndMonIntervalEntry ::=
SEQUENCE {
gnLptFarEndMonIntervalIdx
INTEGER,
--gnLptFarEndMonIntervalES
-- Counter,
--gnLptFarEndMonIntervalSES
-- Counter,
gnLptFarEndMonIntervalBBE
Gauge,
gnLptFarEndMonIntervalUAS
Gauge
}
gnLptFarEndMonIntervalIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96."
::= { gnLptFarEndMonIntervalEntry 1 }
gnLptFarEndMonIntervalBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval."
::= { gnLptFarEndMonIntervalEntry 2}
gnLptFarEndMonIntervalUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds per interval."
::= { gnLptFarEndMonIntervalEntry 3}
gnLptFarEndMonDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnLptFarEndMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the far end LPT part
of the MUX per 24 hours interval."
::= { gnLptMon 6 }
gnLptFarEndMonDayEntry OBJECT-TYPE
SYNTAX GnLptFarEndMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the far end LPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is VT(51, according to RFC1573).
This table is indexed by an interval index, between 1
to 30 and representing each one 24 hours.
The oldest is 30."
INDEX { ifIndex, gnLptFarEndMonDayIdx}
::= { gnLptFarEndMonDayTable 1 }
GnLptFarEndMonDayEntry ::=
SEQUENCE {
gnLptFarEndMonDayIdx
INTEGER,
gnLptFarEndMonDayES
Gauge,
gnLptFarEndMonDaySES
Gauge,
gnLptFarEndMonDayBBE
Gauge,
gnLptFarEndMonDayUAS
Gauge
}
gnLptFarEndMonDayIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30."
::= { gnLptFarEndMonDayEntry 1 }
gnLptFarEndMonDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Errored Seconds per interval of 24 hours."
::= { gnLptFarEndMonDayEntry 2}
gnLptFarEndMonDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Severely Errored Seconds
per interval of 24 hours."
::= { gnLptFarEndMonDayEntry 3}
gnLptFarEndMonDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval of 24 hours."
::= { gnLptFarEndMonDayEntry 4 }
gnLptFarEndMonDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds
per interval of 24 hours."
::= { gnLptFarEndMonDayEntry 5 }
gnMuxCfgXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMuxCfgXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the mux board."
::= { gnMux 13 }
gnMuxCfgXEntry OBJECT-TYPE
SYNTAX GnMuxCfgXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the mux configuration table."
INDEX { gnMuxCfgXId }
::= { gnMuxCfgXTable 1 }
GnMuxCfgXEntry ::=
SEQUENCE {
gnMuxCfgXId
INTEGER,
gnMuxCfgXWsAdmin
INTEGER,
gnMuxCfgXWsLoopback
INTEGER,
gnMuxCfgXHwReset
INTEGER,
gnMUXCfgXTempLicenseEnable
INTEGER,
gnMUXCfgXTempLicenseTimer
INTEGER
}
gnMuxCfgXId OBJECT-TYPE
SYNTAX INTEGER
{
mux1(3),
mux2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates which device is involved
in the specific row."
::= { gnMuxCfgXEntry 1 }
gnMuxCfgXWsAdmin OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Enable Disable drawer wayside channel "
DEFVAL { enable }
::= { gnMuxCfgXEntry 2 }
gnMuxCfgXWsLoopback OBJECT-TYPE
SYNTAX INTEGER {
noloopback(2),
waySideLoop(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls the WAYSIDE channel loopback diagnostic operations."
DEFVAL { noloopback }
::= { gnMuxCfgXEntry 3 }
gnMuxCfgXHwReset OBJECT-TYPE
SYNTAX INTEGER
{
noOperation(2),
hwReset(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"hwReset - Hardware reset for mux board."
DEFVAL { noOperation }
::= { gnMuxCfgXEntry 4 }
gnMUXCfgXTempLicenseEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3),
notSupported(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set temporary license enable or disable"
DEFVAL { disable }
::= { gnMuxCfgXEntry 5 }
gnMUXCfgXTempLicenseTimer OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the temporary license timer"
DEFVAL { 0 }
::= { gnMuxCfgXEntry 6 }
gnMuxStatXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnMuxStatXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the status of the mux board."
::= { gnMux 14 }
gnMuxStatXEntry OBJECT-TYPE
SYNTAX GnMuxStatXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the mux configuration table."
INDEX { gnMuxStatXId }
::= { gnMuxStatXTable 1 }
GnMuxStatXEntry ::=
SEQUENCE {
gnMuxStatXId
INTEGER,
gnMuxStatXMuxSerialNumber
DisplayString,
gnMuxStatXIfLeds
OCTET STRING,
gnMuxStatXNumOfIfOnClass1
INTEGER,
gnMuxStatXNumOfIfOnClass2
INTEGER,
gnMuxStatXNumOfIfOnClass3
INTEGER,
gnMuxStatXAesAdmin
INTEGER,
gnMuxStatXMuxFWVer
DisplayString,
gnMuxStatXMuxFWPostVer
DisplayString,
gnMuxStatXBoardConnector
INTEGER,
gnMuxStatXBoardType
INTEGER
}
gnMuxStatXId OBJECT-TYPE
SYNTAX INTEGER
{
mux1(3),
mux2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates which device is involved
in the specific row."
::= { gnMuxStatXEntry 1 }
gnMuxStatXMuxSerialNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the MUX serial number - up to 20 characters "
::= { gnMuxStatXEntry 2 }
gnMuxStatXIfLeds OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Interface LEDs. For the management station use.
Each two bits represents one led as follows: 00 - Gray, 01 - Green, 10 - Orange, 11 - Red.
The led order: Led1 is msb 2 bits , after it led2, till led 16 - 2 lsb bits."
::= { gnMuxStatXEntry 3 }
gnMuxStatXNumOfIfOnClass1 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the actual number of interfaces on class 1."
DEFVAL { 0 }
::= { gnMuxStatXEntry 4 }
gnMuxStatXNumOfIfOnClass2 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the actual number of interfaces on class 2."
DEFVAL { 0 }
::= { gnMuxStatXEntry 5 }
gnMuxStatXNumOfIfOnClass3 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the actual number of interfaces on class 3."
DEFVAL { 0 }
::= { gnMuxStatXEntry 6 }
gnMuxStatXAesAdmin OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3),
notSupport(4),
systemFailure(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter defines encryption admin mode."
DEFVAL { disable }
::= { gnMuxStatXEntry 7 }
gnMuxStatXMuxFWVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Mux firmware version."
::= { gnMuxStatXEntry 8 }
gnMuxStatXMuxFWPostVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Mux post reset firmware version."
::= { gnMuxStatXEntry 9 }
gnMuxStatXBoardConnector OBJECT-TYPE
SYNTAX INTEGER {
noInterface(2),
oneElectricalSTM1(3),
oneFiberSTM1SingleMode(4),
oneFiberSTM1MultiMode(5),
twoElectricalSTM1(6),
twoFiberSTM1SingleMode(7),
twoFiberSTM1MultiMode(8),
oneFEOnly(9),
oneFEplus4E1(10),
oneFEplus8E1(11),
oneFEplus4T1(12),
oneFEplus8T1(13),
twoFEOnly(14),
twoFEplus4E1(15),
twoFEplus8E1(16),
twoFEplus4T1(17),
twoFEplus8T1(18),
oneDS3(19),
threeDS3(20),
oneE3(21),
threeE3(22),
oneOpticalGBEOnly(23),
oneOpticalGBEPlus8E1(24),
oneOpticalGBEPlus8T1(25),
oneElectricalGBEOnly(26),
oneElectricalGBEPlus8E1(27),
oneElectricalGBEPlus8T1(28),
oneFEplus64E1(29),
oneFEplus64T1(30),
eightE1Only(31),
eightT1Only(32),
oneStm1XC(33),
twoStm1XC(34)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter defines the connector of the mux board, for NMS use."
DEFVAL { noInterface }
::= { gnMuxStatXEntry 10 }
gnMuxStatXBoardType OBJECT-TYPE
SYNTAX INTEGER {
v1(2), -- phos
v2(3), -- summit
v3(4), -- avalon
v4(5), -- phoenix
v5(6), -- GBE Electric board
v6(7) -- Calisto FE board
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter defines the type of the mux."
DEFVAL { v1 }
::= { gnMuxStatXEntry 11 }
-- This group contains the parameters concerning the AUX
gnAux OBJECT IDENTIFIER ::= { gnIDU 4 }
gnAuxGeneral OBJECT IDENTIFIER ::= { gnAux 1 }
gnAuxGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnAuxGeneralEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the commands of the Auxiliary channel."
::= {gnAuxGeneral 1}
gnAuxGeneralEntry OBJECT-TYPE
SYNTAX GnAuxGeneralEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Auxiliary channel command Table."
INDEX {gnAuxGeneralId}
::= {gnAuxGeneralTable 1}
GnAuxGeneralEntry ::=
SEQUENCE {
gnAuxGeneralId
INTEGER,
gnAuxGeneralSyncIdcDataBase
INTEGER
}
gnAuxGeneralId OBJECT-TYPE
SYNTAX INTEGER
{
local(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnAuxGeneralEntry 1 }
gnAuxGeneralSyncIdcDataBase OBJECT-TYPE
SYNTAX INTEGER {
noOperation(2),
auxToIdc(3),
idcToAux(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter synchronize between hardware and data base of auxiliary channel."
DEFVAL { noOperation }
::= { gnAuxGeneralEntry 2 }
gnWsc OBJECT IDENTIFIER ::= { gnAux 2 }
gnWscCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnWscCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the Wayside channel."
::= { gnWsc 1 }
gnWscCfgEntry OBJECT-TYPE
SYNTAX GnWscCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Wayside channel part of the AUX Configuration Table."
INDEX {gnWscCfgId, gnWscCfgChNumber}
::= { gnWscCfgTable 1 }
GnWscCfgEntry ::=
SEQUENCE {
gnWscCfgId
INTEGER,
gnWscCfgChNumber
INTEGER,
gnWscCfgRouting
INTEGER,
gnWscCfgEnable
INTEGER,
gnWscCfgBitRate
INTEGER,
gnWscCfgType
INTEGER
}
gnWscCfgId OBJECT-TYPE
SYNTAX INTEGER
{
local(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnWscCfgEntry 1 }
gnWscCfgChNumber OBJECT-TYPE
SYNTAX INTEGER
{
channel1(1),
channel2(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Wayside channel number."
::= { gnWscCfgEntry 2 }
gnWscCfgRouting OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(2),
drawer2(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Wayside channel routing."
DEFVAL { drawer1 }
::= { gnWscCfgEntry 3 }
gnWscCfgEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Wayside channel enable\disable."
DEFVAL { enable }
::= { gnWscCfgEntry 4 }
gnWscCfgBitRate OBJECT-TYPE
SYNTAX INTEGER
{
low(2),
high(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Wayside channel bit rate."
DEFVAL { low }
::= { gnWscCfgEntry 5 }
gnWscCfgType OBJECT-TYPE
SYNTAX INTEGER
{
e1(2),
t1(3),
fastEthernet(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Wayside channel bit rate."
DEFVAL { e1 }
::= { gnWscCfgEntry 6 }
gnWscStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnWscStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the status of the Wayside channel."
::= { gnWsc 2 }
gnWscStatEntry OBJECT-TYPE
SYNTAX GnWscStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Wayside channel part of the AUX Status Table."
INDEX {gnWscStatId, gnWscStatChNumber}
::= { gnWscStatTable 1 }
GnWscStatEntry ::=
SEQUENCE {
gnWscStatId
INTEGER,
gnWscStatChNumber
INTEGER,
gnWscStatBitRateSupport
INTEGER
}
gnWscStatId OBJECT-TYPE
SYNTAX INTEGER
{
local(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnWscStatEntry 1 }
gnWscStatChNumber OBJECT-TYPE
SYNTAX INTEGER
{
channel1(1),
channel2(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Wayside channel number."
::= { gnWscStatEntry 2 }
gnWscStatBitRateSupport OBJECT-TYPE
SYNTAX INTEGER {
supported(2),
notSupported(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for Wayside channel bit rate support."
DEFVAL { notSupported }
::= {gnWscStatEntry 3}
gnEow OBJECT IDENTIFIER ::= { gnAux 3 }
gnEowCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnEowCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the EOW."
::= { gnEow 1 }
gnEowCfgEntry OBJECT-TYPE
SYNTAX GnEowCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the EOW configuration Table."
INDEX {gnEowCfgId}
::= { gnEowCfgTable 1 }
GnEowCfgEntry ::=
SEQUENCE {
gnEowCfgId
INTEGER,
gnEowCfgEowLeftEnable
INTEGER,
gnEowCfgEowRightEnable
INTEGER,
gnEowCfgEowCascadeEnable
INTEGER
}
gnEowCfgId OBJECT-TYPE
SYNTAX INTEGER
{
local(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnEowCfgEntry 1 }
gnEowCfgEowLeftEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"EOW enable\disable."
DEFVAL { enable }
::= { gnEowCfgEntry 2 }
gnEowCfgEowRightEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"EOW enable\disable."
DEFVAL { enable }
::= { gnEowCfgEntry 3 }
gnEowCfgEowCascadeEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"EOW cascade enable\disable."
DEFVAL { disable }
::= { gnEowCfgEntry 4 }
gnEowStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnEowStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the status of the EOW."
::= { gnEow 2 }
gnEowStatEntry OBJECT-TYPE
SYNTAX GnEowStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the EOW status Table."
INDEX {gnEowStatId}
::= { gnEowStatTable 1 }
GnEowStatEntry ::=
SEQUENCE {
gnEowStatId
INTEGER,
gnEowStatEowLeftSupport
INTEGER,
gnEowStatEowRightSupport
INTEGER
}
gnEowStatId OBJECT-TYPE
SYNTAX INTEGER
{
local(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnEowStatEntry 1 }
gnEowStatEowLeftSupport OBJECT-TYPE
SYNTAX INTEGER {
supported(2),
notSupported(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for EOW support."
DEFVAL { supported }
::= {gnEowStatEntry 2}
gnEowStatEowRightSupport OBJECT-TYPE
SYNTAX INTEGER {
supported(2),
notSupported(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for EOW support."
DEFVAL { supported }
::= {gnEowStatEntry 3}
gnUc OBJECT IDENTIFIER ::= { gnAux 4 }
gnUcCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnUcCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the User channel."
::= { gnUc 1 }
gnUcCfgEntry OBJECT-TYPE
SYNTAX GnUcCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the User channel part of the AUX Configuration Table."
INDEX {gnUcCfgId, gnUcCfgChNumber}
::= { gnUcCfgTable 1 }
GnUcCfgEntry ::=
SEQUENCE {
gnUcCfgId
INTEGER,
gnUcCfgChNumber
INTEGER,
gnUcCfgRouting
INTEGER,
gnUcCfgEnable
INTEGER,
gnUcCfgType
INTEGER,
gnUcCfgLoopback
INTEGER
}
gnUcCfgId OBJECT-TYPE
SYNTAX INTEGER
{
local(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnUcCfgEntry 1 }
gnUcCfgChNumber OBJECT-TYPE
SYNTAX INTEGER
{
channel1(1),
channel2(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"User channel number."
::= { gnUcCfgEntry 2 }
gnUcCfgRouting OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(2),
drawer2(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User channel routing."
DEFVAL { drawer1 }
::= { gnUcCfgEntry 3 }
gnUcCfgEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User channel enable\disable."
DEFVAL { disable }
::= { gnUcCfgEntry 4 }
gnUcCfgType OBJECT-TYPE
SYNTAX INTEGER
{
v11Asyn(2),
rs232(3),
v11SynCoDirectional(4),
v11SynContraDirectional(5),
ethernet(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User channel protocol type."
DEFVAL { v11Asyn }
::= { gnUcCfgEntry 5 }
gnUcCfgLoopback OBJECT-TYPE
SYNTAX INTEGER
{
none(2),
line(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User channel loopback activation."
DEFVAL { none }
::= { gnUcCfgEntry 6 }
gnUcStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnUcStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the status of the user channel."
::= { gnUc 2 }
gnUcStatEntry OBJECT-TYPE
SYNTAX GnUcStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the user channel status Table."
INDEX {gnUcStatId}
::= { gnUcStatTable 1 }
GnUcStatEntry ::=
SEQUENCE {
gnUcStatId
INTEGER,
gnUcStatLeftMaxRouteChannel
INTEGER,
gnUcStatRightMaxRouteChannel
INTEGER
}
gnUcStatId OBJECT-TYPE
SYNTAX INTEGER
{
local(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnUcStatEntry 1 }
gnUcStatLeftMaxRouteChannel OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for NMS on the number of
channels the right radio can passthrough."
DEFVAL { 2 }
::= {gnUcStatEntry 2}
gnUcStatRightMaxRouteChannel OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication for NMS on the number of
channels the right radio can passthrough."
DEFVAL { 2 }
::= {gnUcStatEntry 3}
-- ///// Protect start ////////
gnProtect OBJECT IDENTIFIER ::= { gnUnits 3 }
gnProtectCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnProtectCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains protection switch configuration
per device; local and remote."
::= { gnProtect 1 }
gnProtectCfgEntry OBJECT-TYPE
SYNTAX GnProtectCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { gnProtectCfgId }
::= { gnProtectCfgTable 1 }
GnProtectCfgEntry ::=
SEQUENCE {
gnProtectCfgId
INTEGER,
gnProtectCfgSwitchRequest
INTEGER,
gnProtectCfgBERSwitch
INTEGER,
gnProtectCfgExtInSwitch
INTEGER,
gnProtectCfgOption
OCTET STRING,
gnProtectCfgUserCommand
INTEGER,
gnProtectCfgType
INTEGER,
gnProtectCfgProtectionLockout
INTEGER,
gnProtectCfgSdBERSwitch
INTEGER,
gnProtectCfgMultiRadioBlock
INTEGER
}
gnProtectCfgId OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This value indicates which device is involved
in the specific row."
::= { gnProtectCfgEntry 1 }
gnProtectCfgSwitchRequest OBJECT-TYPE
SYNTAX INTEGER {
noAction(2),
userSwitchRequest(3),
userForceSwitch(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Protection user switch request. "
DEFVAL { noAction }
::= { gnProtectCfgEntry 2 }
gnProtectCfgBERSwitch OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Enable or disable automatic switch as a result of BER condition. "
DEFVAL { enable }
::= { gnProtectCfgEntry 3 }
gnProtectCfgExtInSwitch OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Enable or disable automatic switch as a result of alarm
on External Input No. 8. "
DEFVAL { enable }
::= { gnProtectCfgEntry 4 }
gnProtectCfgOption OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" bit 8 (lsb) = dual fiber input.
bit 7 = protection disable
bit 4 = 0 (default) for External protection ; 1 for Internal protection (between the drawers)
bit 3 = 0 (default) for Full protection ; 1 for Radio protection. "
::= { gnProtectCfgEntry 5 }
gnProtectCfgUserCommand OBJECT-TYPE
SYNTAX INTEGER {
noAction(2),
copyConfToMate(3),
copyLeftConfToRight(4), -- No Drawer number use right and left
copyRightConfToLeft(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Copy All the configuration that should be equal in master and slave.
The copy is made from the current unit to it's mate/Left drawer to right drawer or right drawer to left drawer."
DEFVAL { noAction }
::= { gnProtectCfgEntry 6 }
gnProtectCfgType OBJECT-TYPE
SYNTAX INTEGER {
none(2),
internal(3),
external(4),
externalInternal(5),
multiRadioWithoutLineProtection(6),
multiRadioWithLineProtection(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" ."
DEFVAL { none }
::= { gnProtectCfgEntry 7 }
gnProtectCfgProtectionLockout OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" ."
DEFVAL { off }
::= { gnProtectCfgEntry 8 }
gnProtectCfgSdBERSwitch OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Enable or disable automatic switch as a result of signal degrade BER condition. "
DEFVAL { enable }
::= { gnProtectCfgEntry 9 }
gnProtectCfgMultiRadioBlock OBJECT-TYPE
SYNTAX INTEGER {
unblock(2),
blockLeft(3),
blockRight(4),
blockBoth(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Block\un block radio in multi radio protection configuration only."
DEFVAL { unblock }
::= { gnProtectCfgEntry 10 }
gnProtectUnitMode OBJECT-TYPE
SYNTAX INTEGER {
slave(2),
master(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This parameter indicates the unit mode: Master of Slave."
DEFVAL { slave }
::= { gnProtect 2 }
gnHitLessCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnHitLessCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains hitless configuration
per device; local and remote."
::= { gnProtect 3 }
gnHitLessCfgEntry OBJECT-TYPE
SYNTAX GnHitLessCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { gnHitLessCfgId }
::= { gnHitLessCfgTable 1 }
GnHitLessCfgEntry ::=
SEQUENCE {
gnHitLessCfgId
INTEGER,
gnHitLessCfgSwitchEnable
INTEGER,
gnHitLessCfgDiversityType
INTEGER,
gnHitLessCfgSwitchingMode
INTEGER,
gnHitLessCfgRevertTime
INTEGER,
gnHitLessCfgManualSwitch
INTEGER,
gnHitLessCfgEventCounterCommand
INTEGER,
gnHitLessCfgSwitchLock
INTEGER
}
gnHitLessCfgId OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2),
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This value indicates which device is involved
in the specific row."
::= { gnHitLessCfgEntry 1 }
gnHitLessCfgSwitchEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Enable or disable the Hitless feature."
DEFVAL { enable }
::= { gnHitLessCfgEntry 2 }
gnHitLessCfgDiversityType OBJECT-TYPE
SYNTAX INTEGER {
space(2),
frequency(3),
none(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Is the hitless feature working in space diversity mode
or in frequency diversity mode."
DEFVAL { space }
::= { gnHitLessCfgEntry 3 }
gnHitLessCfgSwitchingMode OBJECT-TYPE
SYNTAX INTEGER {
revertive(2),
nonRevertive(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
DEFVAL { revertive }
::= { gnHitLessCfgEntry 4 }
gnHitLessCfgRevertTime OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter indicates the revert time in seconds.
Possible values: 0..15."
DEFVAL { 0 }
::= { gnHitLessCfgEntry 5 }
gnHitLessCfgManualSwitch OBJECT-TYPE
SYNTAX INTEGER {
noAction(2),
activate(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Force manually switch between the hitless modems."
DEFVAL { noAction }
::= { gnHitLessCfgEntry 6 }
gnHitLessCfgEventCounterCommand OBJECT-TYPE
SYNTAX INTEGER {
noAction(2),
clearCounter(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Clears the gnHitLessStatEventCounter."
DEFVAL { noAction }
::= { gnHitLessCfgEntry 7 }
gnHitLessCfgSwitchLock OBJECT-TYPE
SYNTAX INTEGER {
off(2),
left(3),
right(4),
self(5),
mate(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" ."
DEFVAL { off }
::= { gnHitLessCfgEntry 8 }
gnHitLessStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnHitLessStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains hitless status
per device; local and remote."
::= { gnProtect 4 }
gnHitLessStatEntry OBJECT-TYPE
SYNTAX GnHitLessStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { gnHitLessStatId }
::= { gnHitLessStatTable 1 }
GnHitLessStatEntry ::=
SEQUENCE {
gnHitLessStatId
INTEGER,
gnHitLessStatReceiverStatus
INTEGER,
gnHitLessStatModeStatus
INTEGER,
gnHitLessStatEventCounter
INTEGER,
gnHitLessStatAlarmStatus
OCTET STRING
}
gnHitLessStatId OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2),
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This value indicates which device is involved
in the specific row."
::= { gnHitLessStatEntry 1 }
gnHitLessStatReceiverStatus OBJECT-TYPE
SYNTAX INTEGER {
local(2),
mate(3),
leftRadio(4),
rightRadio(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This parameter indicates which Modem is active:
the Local or the mate."
DEFVAL { local }
::= { gnHitLessStatEntry 2 }
gnHitLessStatModeStatus OBJECT-TYPE
SYNTAX INTEGER {
hitlessOK(2),
hitlessFailure(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This parameter indicates if the Hitless system
is working properly."
DEFVAL { hitlessFailure }
::= { gnHitLessStatEntry 3 }
gnHitLessStatEventCounter OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This counter counts the number of hitless switch events."
DEFVAL { 0 }
::= { gnHitLessStatEntry 4 }
gnHitLessStatAlarmStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" bit 1 represent the MSB
bits 1-7 are not in use
bit 8 : Switch lock to right.
bit 9 : Switch lock to left.
bit 10: Protection config mismatch.
bit 11: Diversity config mismatch.
bit 12: Unused radio LOF.
bit 13: Hitless Functionality Failure.
bit 14: Hitless Cable Disconnect.
bit 15: Hitless Mate LOF.
bit 16: Hitless Primary Radio LOF. "
::= { gnHitLessStatEntry 5 }
gnTribStmProtectCfg OBJECT IDENTIFIER ::= { gnProtect 5}
gnTribStmProtectType OBJECT-TYPE
SYNTAX INTEGER {
none(2),
msp(3),
sncp(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
DEFVAL { none }
::= { gnTribStmProtectCfg 1 }
gnTribStmMspConnect OBJECT-TYPE
SYNTAX INTEGER {
dualTribConnect(2),
singleTribConnect(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
DEFVAL { dualTribConnect }
::= { gnTribStmProtectCfg 2 }
gnTribStmMspType OBJECT-TYPE
SYNTAX INTEGER {
uniDirectional(2),
biDirectional(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
DEFVAL { uniDirectional }
::= { gnTribStmProtectCfg 3 }
gnTribStmMspRevertiveMode OBJECT-TYPE
SYNTAX INTEGER {
nonRevertive(2),
revertive(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
DEFVAL { nonRevertive }
::= { gnTribStmProtectCfg 4 }
gnTribStmMspProtectRole OBJECT-TYPE
SYNTAX INTEGER {
main(2),
standBy(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
::= { gnTribStmProtectCfg 5 }
gnTribStmMspWaitToRestoreTime OBJECT-TYPE
SYNTAX INTEGER (5..12)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the wait-to-restore time in minutes.
Possible values: 5..12. "
DEFVAL {5}
::= { gnTribStmProtectCfg 6 }
gnTribStmMspUserCommand OBJECT-TYPE
SYNTAX INTEGER {
clear(2),
lockOut(3),
forceSwitch(4),
manualSwitch(5),
exercise(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"."
DEFVAL { clear }
::= { gnTribStmProtectCfg 7 }
gnTribStmProtectStat OBJECT IDENTIFIER ::= { gnProtect 6}
gnTribStmProtectCurrentState OBJECT-TYPE
SYNTAX INTEGER {
working(2),
protecting(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { gnTribStmProtectStat 1 }
gnTribStmProtectCableStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(2),
fault(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"."
::= { gnTribStmProtectStat 2 }
gnProtectXTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnProtectXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { gnProtect 7 }
gnProtectXEntry OBJECT-TYPE
SYNTAX GnProtectXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { gnProtectXId }
::= { gnProtectXTable 1 }
GnProtectXEntry ::=
SEQUENCE {
gnProtectXId
INTEGER,
gnProtectXProtectUnitMode
INTEGER,
gnProtectXMultiRadioOhRadioSource
INTEGER
}
gnProtectXId OBJECT-TYPE
SYNTAX INTEGER
{
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnProtectXEntry 1 }
gnProtectXProtectUnitMode OBJECT-TYPE
SYNTAX INTEGER {
slave(2),
master(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This parameter indicates the unit mode: Master of Slave."
DEFVAL { slave }
::= { gnProtectXEntry 2 }
gnProtectXMultiRadioOhRadioSource OBJECT-TYPE
SYNTAX INTEGER {
drawer1(3),
drawer2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter indicates the radio source of the OH in multi radio configuration merely."
DEFVAL { drawer1 }
::= { gnProtectXEntry 3 }
gnLinkGroups OBJECT IDENTIFIER ::= { gnProtect 8 }
topologiesOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TopologiesOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the Topologies options."
::= { gnLinkGroups 1 }
topologiesOptionsEntry OBJECT-TYPE
SYNTAX TopologiesOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the Topologies options."
INDEX { topologiesOptionsGroupTopology}
::= { topologiesOptionsTable 1 }
TopologiesOptionsEntry ::=
SEQUENCE {
topologiesOptionsGroupTopology
INTEGER (1),
topologiesOptionsMembersCarriers
INTEGER (1),
topologiesOptionsProtectingCarriers
INTEGER (1),
topologiesOptionsName
DisplayString (SIZE(0..20))
}
topologiesOptionsGroupTopology OBJECT-TYPE
SYNTAX INTEGER (1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates a bitmap :
----------------------------------------
| 15..12 | 11...........8 | 7........0 |
| Set Id | Group Topology | Group Size |
---------------------------------------"
::= { topologiesOptionsEntry 1 }
topologiesOptionsMembersCarriers OBJECT-TYPE
SYNTAX INTEGER (1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates a bitmap, LSB = carrier #1, #2..... "
::= { topologiesOptionsEntry 2 }
topologiesOptionsProtectingCarriers OBJECT-TYPE
SYNTAX INTEGER (1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates a bitmap, LSB = carrier #1, #2..... "
::= { topologiesOptionsEntry 3 }
topologiesOptionsName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the name of the topology, HSB 1:1, Stand Alone, 2+1.... "
::= { topologiesOptionsEntry 4 }
linkGroupingTable OBJECT-TYPE
SYNTAX SEQUENCE OF LinkGroupingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the link grouping."
::= { gnLinkGroups 2 }
linkGroupingEntry OBJECT-TYPE
SYNTAX LinkGroupingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the link grouping."
INDEX { linkGroupingGroupId}
::= { linkGroupingTable 1 }
LinkGroupingEntry ::=
SEQUENCE {
linkGroupingGroupId
INTEGER (1..4),
linkGroupingGroupAdmin
INTEGER,
linkGroupingGroupTopology
INTEGER,
linkGroupingExtraTrafficAdmin
INTEGER,
linkGroupingGroupName
DisplayString (SIZE(0..40))
}
linkGroupingGroupId OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the group id "
::= { linkGroupingEntry 1 }
linkGroupingGroupAdmin OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the groups admin "
::= { linkGroupingEntry 2 }
linkGroupingGroupTopology OBJECT-TYPE
SYNTAX INTEGER
{
topologyhsb1-1(1),
-- topologyhsb2-2(2),
topologystandalone(256),
topology1plus1(513),
topology2plus1(514),
topology3plus1(515),
topology4plus1(516),
topology5plus1(517),
topology6plus1(518),
topology7plus1(519),
topology8plus1(520),
topology9plus1(521)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates a bitmap :
----------------------------------------
| 15..12 | 11...........8 | 7........0 |
| Set Id | Group Topology | Group Size |
---------------------------------------"
::= { linkGroupingEntry 3 }
linkGroupingExtraTrafficAdmin OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the ET admin "
::= { linkGroupingEntry 4 }
linkGroupingGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the groups name. "
::= { linkGroupingEntry 5 }
protectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProtectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the link grouping protection."
::= { gnLinkGroups 3 }
protectionEntry OBJECT-TYPE
SYNTAX ProtectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the link grouping protection."
INDEX { protectionGroupId}
::= { protectionTable 1 }
ProtectionEntry ::=
SEQUENCE {
protectionGroupId
INTEGER (1..4),
protectionGroupsProtectionAdmin
INTEGER,
protectionNplus1ProtectionMethod
INTEGER,
protectionProtectingCarrierId
INTEGER (0..15)
}
protectionGroupId OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the group id. "
::= { protectionEntry 1 }
protectionGroupsProtectionAdmin OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the groups protection admin. "
::= { protectionEntry 2 }
protectionNplus1ProtectionMethod OBJECT-TYPE
SYNTAX INTEGER
{
standard(2),
advanced(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the N+1 protection method. "
::= { protectionEntry 3 }
protectionProtectingCarrierId OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the carrier id. "
::= { protectionEntry 4 }
standardProtectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF StandardProtectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the link grouping standard protection."
::= { gnLinkGroups 4 }
standardProtectionEntry OBJECT-TYPE
SYNTAX StandardProtectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the link grouping standard protection."
INDEX { standardProtectionGroupId}
::= { standardProtectionTable 1 }
StandardProtectionEntry ::=
SEQUENCE {
standardProtectionGroupId
INTEGER (1..4),
standardProtectionSwitchOnEarlyWarning
INTEGER,
standardProtectionHighPrioProtectionTh
INTEGER,
standardProtectionRevertiveLink
INTEGER,
standardProtectionRevertiveSwitchTimeOut
INTEGER (1..15)
}
standardProtectionGroupId OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the group id. "
::= { standardProtectionEntry 1 }
standardProtectionSwitchOnEarlyWarning OBJECT-TYPE
SYNTAX INTEGER
{
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates switch on early warning. "
::= { standardProtectionEntry 2 }
standardProtectionHighPrioProtectionTh OBJECT-TYPE
SYNTAX INTEGER
{
bblof(4),
bbexb(5),
bbsd(6),
ew(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the high priority protection. "
::= { standardProtectionEntry 3 }
standardProtectionRevertiveLink OBJECT-TYPE
SYNTAX INTEGER
{
carrier1(1),
carrier2(2),
carrier3(3),
carrier4(4),
carrier5(5),
carrier6(6),
carrier7(7),
carrier8(8),
carrier9(9),
carrier10(10),
carrier11(11),
carrier12(12),
carrier13(13),
carrier14(14),
carrier15(15),
extraTraffic(256),
none(257)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the revertive link. "
::= { standardProtectionEntry 4 }
standardProtectionRevertiveSwitchTimeOut OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the revertive switch time out. "
::= { standardProtectionEntry 5 }
membersTable OBJECT-TYPE
SYNTAX SEQUENCE OF MembersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the link groups members."
::= { gnLinkGroups 5 }
membersEntry OBJECT-TYPE
SYNTAX MembersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the link groups members."
INDEX { membersGroupId, membersCarrierId}
::= { membersTable 1 }
MembersEntry ::=
SEQUENCE {
membersGroupId
INTEGER (1..4),
membersCarrierId
INTEGER (1..15),
membersProtectionPriorityLevel
INTEGER
}
membersGroupId OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the group id. "
::= { membersEntry 1 }
membersCarrierId OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the carrier id. "
::= { membersEntry 2 }
membersProtectionPriorityLevel OBJECT-TYPE
SYNTAX INTEGER
{
void(2),
normal(3),
high(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the protection priority level. "
::= { membersEntry 3 }
nplus1ProtectingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Nplus1ProtectingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the link group N+1 protecting."
::= { gnLinkGroups 6 }
nplus1ProtectingEntry OBJECT-TYPE
SYNTAX Nplus1ProtectingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the link group N+1 protecting."
INDEX { nplus1ProtectingGroupId}
::= { nplus1ProtectingTable 1 }
Nplus1ProtectingEntry ::=
SEQUENCE {
nplus1ProtectingGroupId
INTEGER (1..4),
nplus1ProtectingXCProtectionFraming
INTEGER,
nplus1ProtectingProtectedLinkTx
INTEGER (0..15),
nplus1ProtectingProtectedLinkRx
INTEGER (0..15),
nplus1ProtectingRequestedLinkTx
INTEGER (0..15),
nplus1ProtectingRequestedLinkRx
INTEGER (0..15),
nplus1ProtectingSwitchToProtectingCommand
INTEGER
}
nplus1ProtectingGroupId OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the group id. "
::= { nplus1ProtectingEntry 1 }
nplus1ProtectingXCProtectionFraming OBJECT-TYPE
SYNTAX INTEGER
{
na(2),
lof(3),
noPeer(4),
clear(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the XC protecting framing. "
::= { nplus1ProtectingEntry 2 }
nplus1ProtectingProtectedLinkTx OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the last known carrier num. 0 means no carrier."
::= { nplus1ProtectingEntry 3 }
nplus1ProtectingProtectedLinkRx OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the last known carrier num. 0 means no carrier."
::= { nplus1ProtectingEntry 4 }
nplus1ProtectingRequestedLinkTx OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the last known carrier num. 0 means no carrier."
::= { nplus1ProtectingEntry 5 }
nplus1ProtectingRequestedLinkRx OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the last known carrier num. 0 means no carrier."
::= { nplus1ProtectingEntry 6 }
nplus1ProtectingSwitchToProtectingCommand OBJECT-TYPE
SYNTAX INTEGER
{
noaction(256),
lockout(512),
force1(769),
force2(770),
force3(771),
force4(772),
force5(773),
force6(774),
force7(775),
force8(776),
force9(777),
force10(778),
force11(779),
force12(780),
force13(781),
force14(782),
force15(783),
request1(1025),
request2(1026),
request3(1027),
request4(1028),
request5(1029),
request6(1030),
request7(1031),
request8(1032),
request9(1033),
request10(1034),
request11(1035),
request12(1036),
request13(1037),
request14(1038),
request15(1039)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the switch to protecting command.
The force switch command is Bi-directional."
::= { nplus1ProtectingEntry 7 }
carrierProtectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CarrierProtectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the carrier protection."
::= { gnLinkGroups 7 }
carrierProtectionEntry OBJECT-TYPE
SYNTAX CarrierProtectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the carrier protection."
INDEX { carrierProtectionXCId, carrierProtectionCarrierId}
::= { carrierProtectionTable 1 }
CarrierProtectionEntry ::=
SEQUENCE {
carrierProtectionXCId
INTEGER (1..6),
carrierProtectionCarrierId
INTEGER (1..15),
carrierProtectionLinkGroupNum
INTEGER,
carrierProtectionServedByRemoteXC
INTEGER,
carrierProtectionRadioStatus
INTEGER,
carrierProtectionLineFraming
INTEGER,
carrierProtectionLoopback
INTEGER,
carrierProtectionLoopbackTimer
INTEGER (0..1440)
}
carrierProtectionXCId OBJECT-TYPE
SYNTAX INTEGER (1..6)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the XC id. "
::= { carrierProtectionEntry 1 }
carrierProtectionCarrierId OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the carrier id. "
::= { carrierProtectionEntry 2 }
carrierProtectionLinkGroupNum OBJECT-TYPE
SYNTAX INTEGER
{
standalone(2),
group1(3),
group2(4),
group3(5),
group4(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the link group number. "
::= { carrierProtectionEntry 3 }
carrierProtectionServedByRemoteXC OBJECT-TYPE
SYNTAX INTEGER
{
na(2),
yes(3),
no(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates whether served by remote XC. "
::= { carrierProtectionEntry 4 }
carrierProtectionRadioStatus OBJECT-TYPE
SYNTAX INTEGER
{
na(2),
off(3),
bblof(4),
bbexb(5),
bbsd(6),
ew(7),
clear(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the radio status. "
::= { carrierProtectionEntry 5 }
carrierProtectionLineFraming OBJECT-TYPE
SYNTAX INTEGER
{
na(2),
lof(3),
clear(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the line framing. "
::= { carrierProtectionEntry 6 }
carrierProtectionLoopback OBJECT-TYPE
SYNTAX INTEGER
{
none(3),
external(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the loopback. "
::= { carrierProtectionEntry 7 }
carrierProtectionLoopbackTimer OBJECT-TYPE
SYNTAX INTEGER (0..1440)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the remaining time (in minutes) till the loopback timer will be expired. "
::= { carrierProtectionEntry 8 }
nplus1StandardPMCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Nplus1StandardPMCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the standard PM current."
::= { gnLinkGroups 8 }
nplus1StandardPMCurrEntry OBJECT-TYPE
SYNTAX Nplus1StandardPMCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the standard PM current."
INDEX { nplus1StandardPMCurrCarrierId}
::= { nplus1StandardPMCurrTable 1 }
Nplus1StandardPMCurrEntry ::=
SEQUENCE {
nplus1StandardPMCurrCarrierId
INTEGER (1..15),
nplus1StandardPMCurrTimeElapsed
INTEGER (1..900),
nplus1StandardPMCurrValidIntervals
INTEGER (1..96),
nplus1StandardPMCurrLastDayIDF
INTEGER,
nplus1StandardPMCurrLastDayGroupNum
INTEGER(-1..4),
nplus1StandardPMCurrPSAC
Gauge,
nplus1StandardPMCurrFSRC
Gauge,
nplus1StandardPMCurrPSAD
Gauge,
nplus1StandardPMCurrFSRD
Gauge,
nplus1StandardPMCurrLastDayPSAC
Gauge,
nplus1StandardPMCurrLastDayFSRC
Gauge,
nplus1StandardPMCurrLastDayPSAD
Gauge,
nplus1StandardPMCurrLastDayFSRD
Gauge
}
nplus1StandardPMCurrCarrierId OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the carrier id. "
::= { nplus1StandardPMCurrEntry 1 }
nplus1StandardPMCurrTimeElapsed OBJECT-TYPE
SYNTAX INTEGER (1..900)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the time that elapsed. "
::= { nplus1StandardPMCurrEntry 2 }
nplus1StandardPMCurrValidIntervals OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the valid intervals. "
::= { nplus1StandardPMCurrEntry 3 }
nplus1StandardPMCurrLastDayIDF OBJECT-TYPE
SYNTAX INTEGER
{
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the carrier id. "
::= { nplus1StandardPMCurrEntry 4 }
nplus1StandardPMCurrLastDayGroupNum OBJECT-TYPE
SYNTAX INTEGER (-1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the group's number. "
::= { nplus1StandardPMCurrEntry 5 }
nplus1StandardPMCurrPSAC OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the PSAC value. "
::= { nplus1StandardPMCurrEntry 6 }
nplus1StandardPMCurrFSRC OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the FSRC value. "
::= { nplus1StandardPMCurrEntry 7 }
nplus1StandardPMCurrPSAD OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the PSAD value. "
::= { nplus1StandardPMCurrEntry 8 }
nplus1StandardPMCurrFSRD OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the FSRD value. "
::= { nplus1StandardPMCurrEntry 9 }
nplus1StandardPMCurrLastDayPSAC OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the last Day PSAC value. "
::= { nplus1StandardPMCurrEntry 10 }
nplus1StandardPMCurrLastDayFSRC OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the last Day FSRC value. "
::= { nplus1StandardPMCurrEntry 11 }
nplus1StandardPMCurrLastDayPSAD OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the last Day PSAD value. "
::= { nplus1StandardPMCurrEntry 12 }
nplus1StandardPMCurrLastDayFSRD OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the last Day FSRD value. "
::= { nplus1StandardPMCurrEntry 13 }
nplus1StandardPMIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF Nplus1StandardPMIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the standard PM interval. "
::= { gnLinkGroups 9 }
nplus1StandardPMIntervalEntry OBJECT-TYPE
SYNTAX Nplus1StandardPMIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the standard PM interval. "
INDEX { nplus1StandardPMIntervalCarrierId, nplus1StandardPMIntervalIdx}
::= { nplus1StandardPMIntervalTable 1 }
Nplus1StandardPMIntervalEntry ::=
SEQUENCE {
nplus1StandardPMIntervalCarrierId
INTEGER (1..15),
nplus1StandardPMIntervalIdx
INTEGER (1..96),
nplus1StandardPMIntervalIDF
INTEGER,
nplus1StandardPMIntervalGroupNum
INTEGER (-1..4),
nplus1StandardPMIntervalPSAC
Gauge,
nplus1StandardPMIntervalFSRC
Gauge,
nplus1StandardPMIntervalPSAD
Gauge,
nplus1StandardPMIntervalFSRD
Gauge
}
nplus1StandardPMIntervalCarrierId OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the carrier id. "
::= { nplus1StandardPMIntervalEntry 1 }
nplus1StandardPMIntervalIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the index. "
::= { nplus1StandardPMIntervalEntry 2 }
nplus1StandardPMIntervalIDF OBJECT-TYPE
SYNTAX INTEGER
{
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value is an invalid data flag. "
::= { nplus1StandardPMIntervalEntry 3 }
nplus1StandardPMIntervalGroupNum OBJECT-TYPE
SYNTAX INTEGER (-1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the group's number. "
::= { nplus1StandardPMIntervalEntry 4 }
nplus1StandardPMIntervalPSAC OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the PSAC value. "
::= { nplus1StandardPMIntervalEntry 5 }
nplus1StandardPMIntervalFSRC OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the FSRC value. "
::= { nplus1StandardPMIntervalEntry 6 }
nplus1StandardPMIntervalPSAD OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the PSAD value. "
::= { nplus1StandardPMIntervalEntry 7 }
nplus1StandardPMIntervalFSRD OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the FSRD value. "
::= { nplus1StandardPMIntervalEntry 8 }
nplus1StandardPMDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF Nplus1StandardPMDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table indicates the standard PM day table. "
::= { gnLinkGroups 10 }
nplus1StandardPMDayEntry OBJECT-TYPE
SYNTAX Nplus1StandardPMDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the standard PM day table. "
INDEX { nplus1StandardPMDayCarrierId, nplus1StandardPMDayIdx}
::= { nplus1StandardPMDayTable 1 }
Nplus1StandardPMDayEntry ::=
SEQUENCE {
nplus1StandardPMDayCarrierId
INTEGER (1..15),
nplus1StandardPMDayIdx
INTEGER (1..30),
nplus1StandardPMDayIDF
INTEGER,
nplus1StandardPMDayGroupNum
INTEGER (-1..4),
nplus1StandardPMDayPSAC
Gauge,
nplus1StandardPMDayFSRC
Gauge,
nplus1StandardPMDayPSAD
Gauge,
nplus1StandardPMDayFSRD
Gauge
}
nplus1StandardPMDayCarrierId OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the carrier id. "
::= { nplus1StandardPMDayEntry 1 }
nplus1StandardPMDayIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the index. "
::= { nplus1StandardPMDayEntry 2 }
nplus1StandardPMDayIDF OBJECT-TYPE
SYNTAX INTEGER
{
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value is an invalid data flag. "
::= { nplus1StandardPMDayEntry 3 }
nplus1StandardPMDayGroupNum OBJECT-TYPE
SYNTAX INTEGER (-1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the group's number. "
::= { nplus1StandardPMDayEntry 4 }
nplus1StandardPMDayPSAC OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the PSAC value. "
::= { nplus1StandardPMDayEntry 5 }
nplus1StandardPMDayFSRC OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the FSRC value. "
::= { nplus1StandardPMDayEntry 6 }
nplus1StandardPMDayPSAD OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the PSAD value. "
::= { nplus1StandardPMDayEntry 7 }
nplus1StandardPMDayFSRD OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the FSRD value. "
::= { nplus1StandardPMDayEntry 8 }
-- ///// Protect end ////////////
gnSSM OBJECT IDENTIFIER ::= { gnUnits 4 }
gnSSMCfg OBJECT IDENTIFIER ::= { gnSSM 1 }
gnSSMCfgSSMMode OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
DEFVAL { disabled }
::= { gnSSMCfg 1 }
gnSSMCfgPrimaryClockSource OBJECT-TYPE
SYNTAX INTEGER {
internalClock(2),
external2MB(3),
radioClock(4),
fiberClock(5),
external2MHz(6),
external1AndHalfMB(7),
tributaryClock1(8),
tributaryClock2(9),
tributaryClock3(10),
tributaryClock4(11),
tributaryClock5(12),
tributaryClock6(13),
tributaryClock7(14),
tributaryClock8(15),
tributaryClock9(16),
tributaryClock10(17),
tributaryClock11(18),
tributaryClock12(19),
tributaryClock13(20),
tributaryClock14(21),
tributaryClock15(22),
tributaryClock16(23),
tribSTM1(24)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The primary clock source, configurable for ACCESS radios only."
DEFVAL { internalClock }
::= { gnSSMCfg 2 }
gnSSMCfgPrimaryClockQuality OBJECT-TYPE
SYNTAX INTEGER (1..6)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter indicates the primary clock quality.
Possible values for SDH:
PRC(1), SSUT(2), SSUL(3), SEC(4), STU(5).
Possible values for Sonet:
PRS(1), STU(2), ST2(3), ST3(4), SMC(5), ST4(6). "
::= { gnSSMCfg 3 }
gnSSMCfgSecondaryClockSource OBJECT-TYPE
SYNTAX INTEGER {
internalClock(2),
external2MB(3),
radioClock(4),
fiberClock(5),
external2MHz(6),
external1AndHalfMB(7),
tributaryClock1(8),
tributaryClock2(9),
tributaryClock3(10),
tributaryClock4(11),
tributaryClock5(12),
tributaryClock6(13),
tributaryClock7(14),
tributaryClock8(15),
tributaryClock9(16),
tributaryClock10(17),
tributaryClock11(18),
tributaryClock12(19),
tributaryClock13(20),
tributaryClock14(21),
tributaryClock15(22),
tributaryClock16(23),
tribSTM1(24)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The secondary clock source, configurable for ACCESS radios only."
DEFVAL { internalClock }
::= { gnSSMCfg 4 }
gnSSMCfgSecondaryClockQuality OBJECT-TYPE
SYNTAX INTEGER (1..6)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter indicates the secondary clock quality.
Possible values for SDH:
PRC(1), SSUT(2), SSUL(3), SEC(4), STU(5).
Possible values for Sonet:
PRS(1), STU(2), ST2(3), ST3(4), SMC(5), ST4(6). "
::= { gnSSMCfg 5 }
gnSSMCfgClockUserCommand OBJECT-TYPE
SYNTAX INTEGER {
noAction(2),
switchToPrimaryClock(3),
switchToSecondaryClock(4),
switchToInternalClock(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The clock user command.
Switch is possible only when the SSM mode is disable."
DEFVAL { noAction }
::= { gnSSMCfg 6 }
gnSSMCfgClockOutputMute OBJECT-TYPE
SYNTAX INTEGER { on(2), off(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates if clock output will be in mute state.
(Mute on -> don't transmit) "
DEFVAL { 2 }
::= { gnSSMCfg 7 }
gnSSMStat OBJECT IDENTIFIER ::= { gnSSM 2 }
gnSSMStatStatus OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Alarm status of SSM. Bit 1 is MSB, bit=1 when alarm active.
bit 1 = Unlock
bit 2 = Out Of Range
bit 3 = Primary Clock Source Failure
bit 4 = Secondary Clock Source Failure "
::= { gnSSMStat 1 }
gnSSMStatCurrentClock OBJECT-TYPE
SYNTAX INTEGER {
primary(2),
secondary(3),
internal(4),
holdOver(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnSSMStat 2 }
gnSSMStatCurrentClockQuality OBJECT-TYPE
SYNTAX INTEGER (1..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This parameter indicates the current clock quality.
SDH values: PRC(1), SSUT(2), SSUL(3), SEC(4), STU(5), DNU(6).
Sonet values: PRS(1), STU(2), ST2(3), ST3(4), SMC(5), ST4(6), DUS(7)."
::= { gnSSMStat 3 }
gnSSMStatClockUnitType OBJECT-TYPE
SYNTAX INTEGER {
noClockUnit(2),
smc(3),
sec(4),
st3(5),
st3e(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { gnSSMStat 4 }
gnSSMStatHoldoverPeriod OBJECT-TYPE
SYNTAX INTEGER (0..2880)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter indicates the minutes time period in holdover state. "
DEFVAL { 0 }
::= { gnSSMStat 5 }
gnAccess OBJECT IDENTIFIER ::= { ceragon 4 }
gnAccessCfg OBJECT IDENTIFIER ::= { gnAccess 1 }
gnAccessCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnAccessCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration and status of the access ports."
::= { gnAccessCfg 1 }
gnAccessCfgEntry OBJECT-TYPE
SYNTAX GnAccessCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for the table containing an interface index for every interface
which type is DS3 (30, according to RFC1573)."
INDEX { ifIndex }
::= { gnAccessCfgTable 1 }
GnAccessCfgEntry ::=
SEQUENCE {
gnAccessCfgLongCableOption
INTEGER,
gnAccessCfgLoopbackOption
INTEGER,
gnAccessCfgRunPrbs
INTEGER,
gnAccessCfgEXCThresh
INTEGER,
gnAccessCfgSDThresh
INTEGER,
gnAccessCfgTest
INTEGER,
gnAccessCfgLineCoding
INTEGER
}
gnAccessCfgLongCableOption OBJECT-TYPE
SYNTAX INTEGER {
ds3ShortCable(2),
ds3LongCable(3),
t1From0to133ft(4),
t1From133to266ft(5),
t1From266to399ft(6),
t1From399to533ft(7),
t1From533to655ft(8),
anyLength(9),
t1FA640From0to110ft(10),
t1FA640From110to220ft(11),
t1FA640From220to330ft(12),
t1FA640From330to440ft(13),
t1FA640From440to550ft(14)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter defines the line build-out option.
Possible values:
For DS3: ds3ShortCable, ds3LongCable.
For T1: t1From0to133ft..t1From533to655ft.
For E1/E3: anyLength.
For T1 in 640 systems: t1FA640From0to110ft..t1FA640From440to550ft."
DEFVAL { t1From0to133ft }
::= { gnAccessCfgEntry 1 }
gnAccessCfgLoopbackOption OBJECT-TYPE
SYNTAX INTEGER {
noloopback(2),
interfaceInterLoop(3),
interfaceExterLoop(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter enable the user to launch a loopback."
::= { gnAccessCfgEntry 2 }
gnAccessCfgRunPrbs OBJECT-TYPE
SYNTAX INTEGER {
noOperation(2),
lineOnRadioOnRcvLine(3),
lineOnRadioOnRcvRadio(4),
lineOnRadioOffRcvLine(5),
lineOnRadioOffRcvRadio(6),
lineOffRadioOnRcvLine(7),
lineOffRadioOnRcvRadio(8),
lineOffRadioOffRcvLine(9),
lineOffRadioOffRcvRadio(10),
lineOnRadioOnRcvOff(11),
lineOffRadioOnRcvOff(12),
lineOnRadioOffRcvOff(13)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter enables launching a PRBS test."
::= { gnAccessCfgEntry 3 }
gnAccessCfgEXCThresh OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If the bit error rate is higher than this threshold
an EXC alarm would be generated.
EXC is for excessive."
DEFVAL { tenExpMinus3}
::= { gnAccessCfgEntry 4 }
gnAccessCfgSDThresh OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus6(3),
tenExpMinus7(4),
tenExpMinus8(5),
tenExpMinus9(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If the bit error rate is higher than this threshold
a SD alarm would be generated.
SD is for Signal Degrade."
DEFVAL { tenExpMinus6}
::= { gnAccessCfgEntry 5 }
gnAccessCfgTest OBJECT-TYPE
SYNTAX INTEGER {
noAction(2),
sendAIS(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter controls the action to send AIS or not."
::= { gnAccessCfgEntry 6 }
gnAccessCfgLineCoding OBJECT-TYPE
SYNTAX INTEGER {
ami(2),
b8zs(3),
hdb3(4),
b3zs(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The line coding possible values:
For T1: B7ZS(ami), B8ZS.
For E1 & E3: HDB3.
For DS3: B3ZS"
::= { gnAccessCfgEntry 7 }
---------------
gnAccessStat OBJECT IDENTIFIER ::= { gnAccess 2 }
gnAccessStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnAccessStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the status of the access ports."
::= { gnAccessStat 1 }
gnAccessStatEntry OBJECT-TYPE
SYNTAX GnAccessStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for the table containing an interface index for every interface
which type is DS3 (30, according to RFC1573)."
INDEX { ifIndex }
::= { gnAccessStatTable 1 }
GnAccessStatEntry ::=
SEQUENCE {
gnAccessStatInterfaceBer
INTEGER,
gnAccessStatStatus
OCTET STRING,
gnAccessStatPrbsBer
INTEGER,
gnAccessStatValidIntervals
INTEGER
}
gnAccessStatInterfaceBer OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4),
tenExpMinus6(5),
tenExpMinus7(6),
tenExpMinus8(7),
tenExpMinus9(8),
tenExpMinus10(9),
tenExpMinus11(10),
tenExpMinus12(11),
tenExpMinus13(12),
tenExpMinus14(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Current Bit Error Rate. "
::= { gnAccessStatEntry 1 }
gnAccessStatStatus OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Alarm status of an ACCESS radio. Bit 1 is MSB, bit=1 when alarm active.
bit 2 = LOS
bit 6 = AIS
bit 9 = SD
bit 10 = EXC
bit 11 = Unexpected signal -- when disabled, will rise if detect data.
bit 14 = Out Of Lock "
::= { gnAccessStatEntry 2 }
gnAccessStatPrbsBer OBJECT-TYPE
SYNTAX INTEGER {
tenExpMinus3(2),
tenExpMinus4(3),
tenExpMinus5(4),
tenExpMinus6(5),
tenExpMinus7(6),
tenExpMinus8(7),
tenExpMinus9(8),
tenExpMinus10(9),
tenExpMinus11(10),
tenExpMinus12(11),
tenExpMinus13(12),
tenExpMinus14(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current PRBS Errors of the operation set
in the mib variable gnAccessCfgRunPrbs,
use this variable to clear the error counter."
::= { gnAccessStatEntry 3 }
gnAccessStatValidIntervals OBJECT-TYPE
SYNTAX INTEGER (0..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of previous valid intervals for which valid data has been stored
for the specific interface."
::= { gnAccessStatEntry 4 }
----
gnFastEthernetCfg OBJECT IDENTIFIER ::= { gnAccess 3 }
gnFastEthernetCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnFastEthernetCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the Fast Ethernet ports."
::= { gnFastEthernetCfg 1 }
gnFastEthernetCfgEntry OBJECT-TYPE
SYNTAX GnFastEthernetCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Fast Ethernet configuration table."
INDEX { ifIndex }
::= { gnFastEthernetCfgTable 1 }
GnFastEthernetCfgEntry ::=
SEQUENCE {
gnFastEthernetCfgAutoNegotiation
INTEGER,
gnFastEthernetCfgForceSpeed
INTEGER,
gnFastEthernetCfgDynamicBand
INTEGER,
gnFastEthernetCfgGigabitEthernet
INTEGER,
gnFastEthernetCfgDuplexMode
INTEGER,
gnFastEthernetCfgQueuingScheme
INTEGER
}
gnFastEthernetCfgAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER { on(2), off(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter defines if auto negotiations protocol is active."
::= { gnFastEthernetCfgEntry 1 }
gnFastEthernetCfgForceSpeed OBJECT-TYPE
SYNTAX INTEGER {
tenBased(2),
hundredBased(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter force speed when auto negotiation is off."
::= { gnFastEthernetCfgEntry 2 }
gnFastEthernetCfgDynamicBand OBJECT-TYPE
SYNTAX INTEGER {
notActive(2),
dynamic(3),
leftPreferred(4),
vlanPriority(5),
ipPriority(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dynamic bandwidth allocation:
dynamic means that the two Fast Ethernet ports have the same priority.
LeftPreferred indicates that left Fast Ethernet card priority is higher."
::= { gnFastEthernetCfgEntry 3 }
gnFastEthernetCfgGigabitEthernet OBJECT-TYPE
SYNTAX INTEGER {
disable(2),
enable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Gigabit Ethernet option.
This parameter will be changed after reset. "
::= { gnFastEthernetCfgEntry 4 }
gnFastEthernetCfgDuplexMode OBJECT-TYPE
SYNTAX INTEGER {
halfDuplex(2),
fullDuplex(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter force duplex mode when auto negotiation is off."
::= { gnFastEthernetCfgEntry 5 }
gnFastEthernetCfgQueuingScheme OBJECT-TYPE
SYNTAX INTEGER {
fixedPriority(2),
weightedFair(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the Queuing algorithm."
::= { gnFastEthernetCfgEntry 6 }
----
gnFastEthernetStat OBJECT IDENTIFIER ::= { gnAccess 4 }
gnFastEthernetStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnFastEthernetStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Fast Ethernet status table."
::= { gnFastEthernetStat 1 }
gnFastEthernetStatEntry OBJECT-TYPE
SYNTAX GnFastEthernetStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Fast Ethernet status table."
INDEX { ifIndex }
::= { gnFastEthernetStatTable 1 }
GnFastEthernetStatEntry ::=
SEQUENCE {
gnFastEthernetStatStatus
OCTET STRING
}
gnFastEthernetStatStatus OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Alarm status of an FE radio. Bit 1 is MSB, bit=1 when alarm active.
bit 2 = Loss of Carrier"
::= { gnFastEthernetStatEntry 1 }
----
-- Statistics(PM) For PDH (NB DS3). All PDH tables are included for future
-- development and are not currently implemented.
gnPdhMon OBJECT IDENTIFIER ::= { gnAccess 5 }
gnPdhMonCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnPdhMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters for the PDH table. "
::= { gnPdhMon 1 }
gnPdhMonCurrEntry OBJECT-TYPE
SYNTAX GnPdhMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the PDH
Counters Table. This table contains an interface index for every interface
which type is DS3(30, according to RFC1573)."
INDEX { ifIndex }
::= { gnPdhMonCurrTable 1 }
GnPdhMonCurrEntry ::=
SEQUENCE {
gnPdhMonCurrES
Gauge,
gnPdhMonCurrSES
Gauge,
gnPdhMonCurrBBE
Gauge,
gnPdhMonCurrUAS
Gauge,
gnPdhMonCurrCV
Gauge,
gnPdhMonCurrLastDayES
Gauge,
gnPdhMonCurrLastDaySES
Gauge,
gnPdhMonCurrLastDayBBE
Gauge,
gnPdhMonCurrLastDayUAS
Gauge,
gnPdhMonCurrLastDayCV
Gauge,
gnPdhMonCurrLastDayIDF
INTEGER
}
gnPdhMonCurrES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of errored seconds starting from the present 15 minute
period. ."
::= { gnPdhMonCurrEntry 1}
gnPdhMonCurrSES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of severely errored seconds, starting from the present
15 minute period."
::= { gnPdhMonCurrEntry 2}
gnPdhMonCurrBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 15 minutes period."
::= { gnPdhMonCurrEntry 3}
gnPdhMonCurrUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 15 minutes period."
::= { gnPdhMonCurrEntry 4}
gnPdhMonCurrCV OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of CV
starting from the present 15 minutes period."
::= { gnPdhMonCurrEntry 5}
gnPdhMonCurrLastDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Errored Seconds
starting from the present 24 hours period."
::= { gnPdhMonCurrEntry 6 }
gnPdhMonCurrLastDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Severely Errored Seconds
starting from the present 24 hours period."
::= { gnPdhMonCurrEntry 7 }
gnPdhMonCurrLastDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Background Block Errors
starting from the present 24 hours period."
::= { gnPdhMonCurrEntry 8 }
gnPdhMonCurrLastDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current number of Unavailable Seconds
starting from the present 24 hours period."
::= { gnPdhMonCurrEntry 9 }
gnPdhMonCurrLastDayCV OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of CV, starting from the present 24-hour period."
::= { gnPdhMonCurrEntry 10}
gnPdhMonCurrLastDayIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnPdhMonCurrEntry 11 }
gnPdhMonIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnPdhMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the PDH per interval."
::= { gnPdhMon 2 }
gnPdhMonIntervalEntry OBJECT-TYPE
SYNTAX GnPdhMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the PDH
Counters Table. This table contains an interface index for every interface
which type is DS3(30, according to RFC1573).
This table is indexed by an interval index, between 1
to 96 and representing each one 15 minutes.
The oldest is 96."
INDEX { ifIndex, gnPdhMonIntervalIdx}
::= { gnPdhMonIntervalTable 1 }
GnPdhMonIntervalEntry ::=
SEQUENCE {
gnPdhMonIntervalIdx
INTEGER,
gnPdhMonIntervalES
Gauge,
gnPdhMonIntervalSES
Gauge,
gnPdhMonIntervalBBE
Gauge,
gnPdhMonIntervalUAS
Gauge,
gnPdhMonIntervalCV
Gauge,
gnPdhMonIntervalIDF
INTEGER
}
gnPdhMonIntervalIdx OBJECT-TYPE
SYNTAX INTEGER (1..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96."
::= { gnPdhMonIntervalEntry 1 }
gnPdhMonIntervalES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of errored seconds per interval."
::= { gnPdhMonIntervalEntry 2}
gnPdhMonIntervalSES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of severely errored seconds per interval."
::= { gnPdhMonIntervalEntry 3}
gnPdhMonIntervalBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval."
::= { gnPdhMonIntervalEntry 4}
gnPdhMonIntervalUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds per interval."
::= { gnPdhMonIntervalEntry 5}
gnPdhMonIntervalCV OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of CV per interval."
::= { gnPdhMonIntervalEntry 6}
gnPdhMonIntervalIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnPdhMonIntervalEntry 7 }
gnPdhMonDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnPdhMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the counters of the PDH per 24 hours interval."
::= { gnPdhMon 3 }
gnPdhMonDayEntry OBJECT-TYPE
SYNTAX GnPdhMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the PDH
Counters Table. This table contains an interface index for every interface
which type is DS3(30, according to RFC1573).
This table is indexed by an interval index, between 1
to 30 and representing each one 24 hours.
The oldest is 30."
INDEX { ifIndex, gnPdhMonDayIdx}
::= { gnPdhMonDayTable 1 }
GnPdhMonDayEntry ::=
SEQUENCE {
gnPdhMonDayIdx
INTEGER,
gnPdhMonDayES
Gauge,
gnPdhMonDaySES
Gauge,
gnPdhMonDayBBE
Gauge,
gnPdhMonDayUAS
Gauge,
gnPdhMonDayCV
Gauge,
gnPdhMonDayIDF
INTEGER
}
gnPdhMonDayIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30."
::= { gnPdhMonDayEntry 1 }
gnPdhMonDayES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Errored Seconds per interval of 24 hours."
::= { gnPdhMonDayEntry 2}
gnPdhMonDaySES OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Severely Errored Seconds
per interval of 24 hours."
::= { gnPdhMonDayEntry 3}
gnPdhMonDayBBE OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Background Block Errors
per interval of 24 hours."
::= { gnPdhMonDayEntry 4 }
gnPdhMonDayUAS OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Unavailable Seconds
per interval of 24 hours."
::= { gnPdhMonDayEntry 5 }
gnPdhMonDayCV OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Code Violation Seconds
per interval of 24 hours."
::= { gnPdhMonDayEntry 6}
gnPdhMonDayIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnPdhMonDayEntry 7 }
----
-- ADI: FE Statistics
gnFastEthernetMon OBJECT IDENTIFIER ::= { gnAccess 6 }
gnFastEthernetMonPrivateTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnFastEthernetMonPrivateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Fast Ethernet Private Statistics Table."
::= { gnFastEthernetMon 1 }
gnFastEthernetMonPrivateEntry OBJECT-TYPE
SYNTAX GnFastEthernetMonPrivateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Fast Ethernet private statistics table."
INDEX { ifIndex }
::= { gnFastEthernetMonPrivateTable 1 }
GnFastEthernetMonPrivateEntry ::=
SEQUENCE {
gnFastEthernetMonPrivateAlignmentErrors
Counter,
gnFastEthernetMonPrivateFcsErrors
Counter,
gnFastEthernetMonPrivateFrameTooLongs
Counter
}
gnFastEthernetMonPrivateAlignmentErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of received packets with an alignment
error (Received frame length is not a multiple
of 8 bits, and an FCS error had occurred). "
::= { gnFastEthernetMonPrivateEntry 1 }
gnFastEthernetMonPrivateFcsErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Total number of received packets with a frame check
sequence (FCS) or Cycle Redundancy Check (CRC) error. "
::= { gnFastEthernetMonPrivateEntry 2 }
gnFastEthernetMonPrivateFrameTooLongs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Total number of received frames with an illegal
packet length (>1518 bytes). "
::= { gnFastEthernetMonPrivateEntry 3 }
---------------
gnFastEthernetMonStdHiTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnFastEthernetMonStdHiEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the 32 high bits (MSB) of RFC1213 statistics
for Fast Ethernet."
::= { gnFastEthernetMon 2 }
gnFastEthernetMonStdHiEntry OBJECT-TYPE
SYNTAX GnFastEthernetMonStdHiEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Fast Ethernet
Standard Statistics Table."
INDEX { ifIndex }
::= { gnFastEthernetMonStdHiTable 1 }
GnFastEthernetMonStdHiEntry ::=
SEQUENCE {
gnFastEthernetMonStdHiInOctetsHC
Counter,
gnFastEthernetMonStdHiInUcastPktsHC
Counter,
gnFastEthernetMonStdHiInNUcastPktsHC
Counter,
gnFastEthernetMonStdHiOutOctetsHC
Counter,
gnFastEthernetMonStdHiOutUcastPktsHC
Counter,
gnFastEthernetMonStdHiOutNUcastPktsHC
Counter
}
gnFastEthernetMonStdHiInOctetsHC OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 MSB of The total number of octets received
on the interface, including framing characters."
::= { gnFastEthernetMonStdHiEntry 1 }
gnFastEthernetMonStdHiInUcastPktsHC OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 MSB of The number of subnetwork-unicast
packets delivered to a higher-layer protocol."
::= { gnFastEthernetMonStdHiEntry 2 }
gnFastEthernetMonStdHiInNUcastPktsHC OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 MSB of The number of non-unicast
(i.e., subnetwork- broadcast or subnetwork-multicast)
packets delivered to a higher-layer protocol."
::= { gnFastEthernetMonStdHiEntry 3 }
gnFastEthernetMonStdHiOutOctetsHC OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 MSB of The total number of octets transmitted
out of the interface, including framing characters."
::= { gnFastEthernetMonStdHiEntry 4 }
gnFastEthernetMonStdHiOutUcastPktsHC OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 MSB of The total number of packets that
higher-level protocols requested be transmitted
to a subnetwork-unicast address, including those
that were discarded or not sent."
::= { gnFastEthernetMonStdHiEntry 5 }
gnFastEthernetMonStdHiOutNUcastPktsHC OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 MSB of The total number of packets that
higher-level protocols requested be transmitted
to a non- unicast (i.e., a subnetwork-broadcast
or subnetwork-multicast) address, including those
that were discarded or not sent."
::= { gnFastEthernetMonStdHiEntry 6 }
gnTrailCfg OBJECT IDENTIFIER ::= { gnAccess 7 }
gnTrailCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnTrailCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the trail ports."
::= { gnTrailCfg 1 }
gnTrailCfgEntry OBJECT-TYPE
SYNTAX GnTrailCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { ifIndex }
::= { gnTrailCfgTable 1 }
GnTrailCfgEntry ::=
SEQUENCE {
gnTrailCfgTrailName
DisplayString,
gnTrailCfgProtection
INTEGER,
gnTrailCfgLowPathIndex
INTEGER,
gnTrailCfgLowPathSide
INTEGER,
gnTrailCfgProtectionOptions
INTEGER,
gnTrailCfgMismatchJ2
INTEGER,
gnTrailCfgTransmittedJ2
DisplayString,
gnTrailCfgExpectedJ2
DisplayString,
gnTrailCfgReversionMode
INTEGER,
gnTrailCfgProtectionUserCommand
INTEGER,
gnTrailCfgHoldOffTime
INTEGER,
gnTrailCfgOscillationGuardTime
INTEGER,
gnTrailCfgWaitToRestoreTime
INTEGER,
gnTrailCfgSignalLabelMismatch
INTEGER,
gnTrailCfgBERConsAction
INTEGER
}
gnTrailCfgTrailName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { gnTrailCfgEntry 1 }
gnTrailCfgProtection OBJECT-TYPE
SYNTAX INTEGER {
protected(2),
unprotected(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
DEFVAL { protected}
::= { gnTrailCfgEntry 2 }
gnTrailCfgLowPathIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates the K.L.M index.
It includes 3 digits:
K - most significant digit, L - next digit,
M - last significant digit.
For E1 ports (SDH): K=1..3 ; L=1..7 ; M=1..3.
For T1 ports (Sonet): K=1..3 ; L=1..7 ; M=1..4.
For DS3/E3: K=1..3 ; L=M=0.
If there is no K.L.M index: K=L=M=0.
Example: for mapping an E1 port to K.L.M = 2.5.3, write 253."
::= { gnTrailCfgEntry 3 }
gnTrailCfgLowPathSide OBJECT-TYPE
SYNTAX INTEGER {
east(2),
west(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
DEFVAL {east}
::= { gnTrailCfgEntry 4 }
gnTrailCfgProtectionOptions OBJECT-TYPE
SYNTAX INTEGER {
inhibit(2),
auto(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
DEFVAL {auto}
::= { gnTrailCfgEntry 5 }
gnTrailCfgMismatchJ2 OBJECT-TYPE
SYNTAX INTEGER{
sendAlarm(2),
sendAIS(3),
ignoreAlarm(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"In case of J2 mismatch error, send alarm or send AIS."
DEFVAL { sendAlarm }
::= { gnTrailCfgEntry 6 }
gnTrailCfgTransmittedJ2 OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the J2 string that would be sent."
DEFVAL { "J2 J2 J2 J2 J2 " }
::= { gnTrailCfgEntry 7 }
gnTrailCfgExpectedJ2 OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the J2 string that is expected to be received."
DEFVAL { "J2 J2 J2 J2 J2 " }
::= { gnTrailCfgEntry 8 }
gnTrailCfgReversionMode OBJECT-TYPE
SYNTAX INTEGER {
revertive(2),
nonRevertive(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
DEFVAL {nonRevertive}
::= { gnTrailCfgEntry 9 }
gnTrailCfgProtectionUserCommand OBJECT-TYPE
SYNTAX INTEGER {
noAction(2),
switchToProtection(3),
switchToWorking(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
DEFVAL {noAction}
::= { gnTrailCfgEntry 10 }
gnTrailCfgHoldOffTime OBJECT-TYPE
SYNTAX INTEGER (0..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the hold-off time in milliseconds.
Possible values: 0..20000, 100 mSec steps. "
DEFVAL {0}
::= { gnTrailCfgEntry 11 }
gnTrailCfgOscillationGuardTime OBJECT-TYPE
SYNTAX INTEGER (0..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the oscillation guard time in seconds.
Possible values: 0..60. "
DEFVAL {0}
::= { gnTrailCfgEntry 12 }
gnTrailCfgWaitToRestoreTime OBJECT-TYPE
SYNTAX INTEGER (5..12)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the wait-to-restore time in minutes.
Possible values: 5..12. "
DEFVAL {5}
::= { gnTrailCfgEntry 13 }
gnTrailCfgSignalLabelMismatch OBJECT-TYPE
SYNTAX INTEGER{
sendAlarm(2),
sendAIS(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" In case of a V5 mismatch error, send or don't send AIS."
DEFVAL { sendAlarm }
::= { gnTrailCfgEntry 14 }
gnTrailCfgBERConsAction OBJECT-TYPE
SYNTAX INTEGER{
sendAlarm(2),
sendAISDoPathProtection(3),
doPathProtection(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
DEFVAL { doPathProtection }
::= { gnTrailCfgEntry 15 }
gnTribCfg OBJECT IDENTIFIER ::= { gnAccess 8 }
gnTribCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnTribCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the virtual trails in the Trib STM-1."
::= { gnTribCfg 1 }
gnTribCfgEntry OBJECT-TYPE
SYNTAX GnTribCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { ifIndex }
::= { gnTribCfgTable 1 }
GnTribCfgEntry ::=
SEQUENCE {
gnTribCfgLowPathIndex
INTEGER,
gnTribCfgLowPathSide
INTEGER,
gnTribCfgProtection
INTEGER,
gnTribCfgProtectionOptions
INTEGER,
gnTribCfgReversionMode
INTEGER,
gnTribCfgProtectionUserCommand
INTEGER,
gnTribCfgHoldOffTime
INTEGER,
gnTribCfgOscillationGuardTime
INTEGER,
gnTribCfgWaitToRestoreTime
INTEGER,
gnTribCfgKLM
INTEGER
-- gnTribCfgBERConsAction ask Shuki if we need this
-- INTEGER
}
gnTribCfgLowPathIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates the K.L.M index.
It includes 3 digits:
K - most significant digit, L - next digit,
M - last significant digit.
For E1 ports (SDH): K=1..3 ; L=1..7 ; M=1..3.
For T1 ports (Sonet): K=1..3 ; L=1..7 ; M=1..4.
For DS3/E3: K=1..3 ; L=M=0.
If there is no K.L.M index: K=L=M=0.
Example: for mapping an E1 port to K.L.M = 2.5.3, write 253."
::= { gnTribCfgEntry 1 }
gnTribCfgLowPathSide OBJECT-TYPE
SYNTAX INTEGER {
east(2),
west(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
DEFVAL {east}
::= { gnTribCfgEntry 2 }
gnTribCfgProtection OBJECT-TYPE
SYNTAX INTEGER {
protected(2),
unprotected(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
DEFVAL { protected}
::= { gnTribCfgEntry 3 }
gnTribCfgProtectionOptions OBJECT-TYPE
SYNTAX INTEGER {
inhibit(2),
auto(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
DEFVAL {auto}
::= { gnTribCfgEntry 4 }
gnTribCfgReversionMode OBJECT-TYPE
SYNTAX INTEGER {
revertive(2),
nonRevertive(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
DEFVAL {nonRevertive}
::= { gnTribCfgEntry 5 }
gnTribCfgProtectionUserCommand OBJECT-TYPE
SYNTAX INTEGER {
noAction(2),
switchToProtection(3),
switchToWorking(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
DEFVAL {noAction}
::= { gnTribCfgEntry 6 }
gnTribCfgHoldOffTime OBJECT-TYPE
SYNTAX INTEGER (0..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the hold-off time in milliseconds.
Possible values: 0..20000, 100 mSec steps. "
DEFVAL {0}
::= { gnTribCfgEntry 7 }
gnTribCfgOscillationGuardTime OBJECT-TYPE
SYNTAX INTEGER (0..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the oscillation guard time in seconds.
Possible values: 0..60. "
DEFVAL {0}
::= { gnTribCfgEntry 8 }
gnTribCfgWaitToRestoreTime OBJECT-TYPE
SYNTAX INTEGER (5..12)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the wait-to-restore time in minutes.
Possible values: 5..12. "
DEFVAL {5}
::= { gnTribCfgEntry 9 }
gnTribCfgKLM OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { gnTribCfgEntry 10 }
-- gnTribCfgBERConsAction OBJECT-TYPE
-- SYNTAX INTEGER{
-- sendAlarm(2),
-- sendAISDoPathProtection(3),
-- doPathProtection(4)
-- }
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- " "
-- DEFVAL { doPathProtection }
-- ::= { gnTribCfgEntry 15 }
------
gnTrailPassThrough OBJECT IDENTIFIER ::= { gnAccess 9 }
gnTrailPassThroughTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnTrailPassThroughEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the virtual trails in the Trib STM-1. It is applicable for ADM"
::= { gnTrailPassThrough 1 }
gnTrailPassThroughEntry OBJECT-TYPE
SYNTAX GnTrailPassThroughEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { gnTrailPassThroughIndex }
::= { gnTrailPassThroughTable 1 }
GnTrailPassThroughEntry ::=
SEQUENCE {
gnTrailPassThroughIndex
INTEGER,
gnTrailPassThroughName
DisplayString
}
gnTrailPassThroughIndex OBJECT-TYPE
SYNTAX INTEGER (1..84)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the index of Trail Pass-Through Table. SDH(1-63), Sonet (1-84)."
::= { gnTrailPassThroughEntry 1 }
gnTrailPassThroughName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"for NMS use"
::= { gnTrailPassThroughEntry 2 }
gnGigabitEthernetCfg OBJECT IDENTIFIER ::= { gnAccess 10 }
gnGigabitEthernetCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGigabitEthernetCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the configuration of the Gigabit Ethernet port."
::= { gnGigabitEthernetCfg 1 }
gnGigabitEthernetCfgEntry OBJECT-TYPE
SYNTAX GnGigabitEthernetCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Gigabit Ethernet configuration table."
INDEX { ifIndex }
::= { gnGigabitEthernetCfgTable 1 }
GnGigabitEthernetCfgEntry ::=
SEQUENCE {
gnGigabitEthernetCfgPauseFrameGenerating
INTEGER,
gnGigabitEthernetCfgMuteOnExcError
INTEGER,
gnGigabitEthernetCfgMuteOnSd
INTEGER,
gnGigabitEthernetCfgMuteOnRemoteRadioFault
INTEGER,
gnGigabitEthernetCfgSpeedAndDuplex
INTEGER,
gnGigabitEthernetCfgSchedulerPriorityOption
INTEGER,
gnGigabitEthernetCfgSchedulerQueue1Weight
INTEGER,
gnGigabitEthernetCfgSchedulerQueue2Weight
INTEGER,
gnGigabitEthernetCfgSchedulerQueue3Weight
INTEGER,
gnGigabitEthernetCfgSchedulerQueue4Weight
INTEGER,
gnGigabitEthernetCfgClassifierFirstPrioUDP
INTEGER,
gnGigabitEthernetCfgClassifierPrioBitSource
INTEGER,
gnGigabitEthernetCfgClassifierGroupMinVlanId
INTEGER,
gnGigabitEthernetCfgClassifierGroupMaxVlanId
INTEGER,
gnGigabitEthernetCfgClassifierGroupVlanPriority
INTEGER,
gnGigabitEthernetCfgClassifierGroupVlanSet
INTEGER,
gnGigabitEthernetCfgAcmMuteOnMinConstellation
INTEGER,
gnGigabitEthernetCfgEnableAutomaticTxMute
INTEGER,
gnGigabitEthernetCfgTrafficBISTAdmin
INTEGER,
gnGigabitEthernetCfgClearStatistics
INTEGER,
gnGigabitEthernetCfgPauseFrameForwarding
INTEGER,
gnGigabitEthernetCfgPhyLoopback
INTEGER
}
gnGigabitEthernetCfgPauseFrameGenerating OBJECT-TYPE
SYNTAX INTEGER { enable(2), disable(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter defines the option to generate pause frames when the Tx FIFO reaches his
threshold level (enable) or to (when disabled) stop generate pause frame."
::= { gnGigabitEthernetCfgEntry 1 }
gnGigabitEthernetCfgMuteOnExcError OBJECT-TYPE
SYNTAX INTEGER { enable(2), disable(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter defines whether to mute GBE Tx on excessive BER."
::= { gnGigabitEthernetCfgEntry 2 }
gnGigabitEthernetCfgMuteOnSd OBJECT-TYPE
SYNTAX INTEGER { enable(2), disable(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter defines whether to mute GBE Tx port on signal degrade."
::= { gnGigabitEthernetCfgEntry 3 }
gnGigabitEthernetCfgMuteOnRemoteRadioFault OBJECT-TYPE
SYNTAX INTEGER { enable(2), disable(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter defines whether to mute GBE Tx port on exe error."
::= { gnGigabitEthernetCfgEntry 4 }
gnGigabitEthernetCfgSpeedAndDuplex OBJECT-TYPE
SYNTAX INTEGER
{
autoNegotiation(2),
thousandBasedFullDuplex(3),
thousandBasedHalfDuplex(4),
hundredBasedFullDuplex(5),
hundredBasedHalfDuplex(6),
tenBasedFullDuplex(7),
tenBasedHalfDuplex(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This parameter defines the speed and duplex of the gigabit port, this parameter is not relevant when using
an electric SFP giga line interface."
::= { gnGigabitEthernetCfgEntry 5 }
gnGigabitEthernetCfgSchedulerPriorityOption OBJECT-TYPE
SYNTAX INTEGER { strict(2), hrr(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter defines the algorithm, which the Ethernet packets are taken from the 4 queues.
Strict - The Packets are taken according to strict order (from queue #1 till queue #4).
HRR - Hierarchal Round Robin - the Ethernet packets are taken according to the configure weight."
::= { gnGigabitEthernetCfgEntry 6 }
gnGigabitEthernetCfgSchedulerQueue1Weight OBJECT-TYPE
SYNTAX INTEGER { strict(17) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the weight of the queue."
::= { gnGigabitEthernetCfgEntry 7 }
gnGigabitEthernetCfgSchedulerQueue2Weight OBJECT-TYPE
SYNTAX INTEGER ( 1..16 )
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the weight of the queue."
::= { gnGigabitEthernetCfgEntry 8 }
gnGigabitEthernetCfgSchedulerQueue3Weight OBJECT-TYPE
SYNTAX INTEGER ( 1..16 )
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the weight of the queue."
::= { gnGigabitEthernetCfgEntry 9 }
gnGigabitEthernetCfgSchedulerQueue4Weight OBJECT-TYPE
SYNTAX INTEGER ( 1..16 )
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the weight of the queue."
::= { gnGigabitEthernetCfgEntry 10 }
gnGigabitEthernetCfgClassifierFirstPrioUDP OBJECT-TYPE
SYNTAX INTEGER { enable(2),disable(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the administrative status for priority override to UDP packets."
::= { gnGigabitEthernetCfgEntry 11 }
gnGigabitEthernetCfgClassifierPrioBitSource OBJECT-TYPE
SYNTAX INTEGER {
none(2),
externalOverhead(3),
vlan(4),
ip(5),
mpls(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the administrative status for priority bits source."
::= { gnGigabitEthernetCfgEntry 12 }
gnGigabitEthernetCfgClassifierGroupMinVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the minimum VLAN Id for the current group."
::= { gnGigabitEthernetCfgEntry 13 }
gnGigabitEthernetCfgClassifierGroupMaxVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the maximum VLAN Id for the current group."
::= { gnGigabitEthernetCfgEntry 14 }
gnGigabitEthernetCfgClassifierGroupVlanPriority OBJECT-TYPE
SYNTAX INTEGER {
clear(0),
queue1(1),
queue2(2),
queue3(3),
queue4(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter set the VLAN priority for the current group."
::= { gnGigabitEthernetCfgEntry 15 }
gnGigabitEthernetCfgClassifierGroupVlanSet OBJECT-TYPE
SYNTAX INTEGER {active(2), notActive(3)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter release the agent to configure the current group."
::= { gnGigabitEthernetCfgEntry 16 }
gnGigabitEthernetCfgAcmMuteOnMinConstellation OBJECT-TYPE
SYNTAX INTEGER {
acm4QAM(2),
acm8QAM(3),
acm16QAM(4),
acm32QAM(5),
acm64QAM(6),
acm128QAM(7),
acm256QAM(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter defines on which constellation to mute the GBE Tx port."
::= { gnGigabitEthernetCfgEntry 17 }
gnGigabitEthernetCfgEnableAutomaticTxMute OBJECT-TYPE
SYNTAX INTEGER { enable(2), disable(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter enable\disable automatic Tx mute by system."
::= { gnGigabitEthernetCfgEntry 18 }
gnGigabitEthernetCfgTrafficBISTAdmin OBJECT-TYPE
SYNTAX INTEGER {active(2), notActive(3)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter activate\deactivate GBE traffic test."
::= { gnGigabitEthernetCfgEntry 19 }
gnGigabitEthernetCfgClearStatistics OBJECT-TYPE
SYNTAX INTEGER { noAction(2), clear(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter clear the gigabit ethernet statistics."
::= { gnGigabitEthernetCfgEntry 20 }
gnGigabitEthernetCfgPauseFrameForwarding OBJECT-TYPE
SYNTAX INTEGER { enable(2), disable(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter define if pause frame are forward.
if enable pause frame are forward to the user application.
if disable pause frame are terminated."
::= { gnGigabitEthernetCfgEntry 21 }
gnGigabitEthernetCfgPhyLoopback OBJECT-TYPE
SYNTAX INTEGER
{
noloopback(2),
interfaceInterLoop(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter enable disable PHY internal loopback."
::= { gnGigabitEthernetCfgEntry 22 }
gnVlanEthernetStat OBJECT IDENTIFIER ::= { gnAccess 11 }
gnVlanEthernetStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnVlanEthernetStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table illustrate the VLAN configuration."
::= { gnVlanEthernetStat 1 }
gnVlanEthernetStatEntry OBJECT-TYPE
SYNTAX GnVlanEthernetStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Vlan configuration status table."
INDEX { ifIndex, gnVlanEthernetStatGroupId }
::= { gnVlanEthernetStatTable 1 }
GnVlanEthernetStatEntry ::=
SEQUENCE {
gnVlanEthernetStatGroupId
INTEGER,
gnVlanEthernetStatMinVlanId
INTEGER,
gnVlanEthernetStatMaxVlanId
INTEGER,
gnVlanEthernetStatVlanPriority
INTEGER
}
gnVlanEthernetStatGroupId OBJECT-TYPE
SYNTAX INTEGER (1..20)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter illustrate the VLAN group #."
::= { gnVlanEthernetStatEntry 1 }
gnVlanEthernetStatMinVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter illustrate the minimum VLAN id # of a specific group."
::= { gnVlanEthernetStatEntry 2 }
gnVlanEthernetStatMaxVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter illustrate the maximum VLAN id # of a specific group."
::= { gnVlanEthernetStatEntry 3 }
gnVlanEthernetStatVlanPriority OBJECT-TYPE
SYNTAX INTEGER {
queue1(1),
queue2(2),
queue3(3),
queue4(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter illustrate the priority of a specific VLAN group."
::= { gnVlanEthernetStatEntry 4 }
gnGigabitEthernetStat OBJECT IDENTIFIER ::= { gnAccess 12 }
gnGigabitEthernetStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGigabitEthernetStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Gigabit Ethernet status table."
::= { gnGigabitEthernetStat 1 }
gnGigabitEthernetStatEntry OBJECT-TYPE
SYNTAX GnGigabitEthernetStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the Gigabit Ethernet status table."
INDEX { ifIndex }
::= { gnGigabitEthernetStatTable 1 }
GnGigabitEthernetStatEntry ::=
SEQUENCE {
gnGigabitEthernetStatBistErrorSeconds
INTEGER,
gnGigabitEthernetStatSpeedAndDuplexSupport
OCTET STRING,
gnGigabitEthernetStatValidIntervals
INTEGER,
gnGigabitEthernetStatSpeedAndDuplexMode
INTEGER
}
gnGigabitEthernetStatBistErrorSeconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Traffic BIST results (error seconds)"
::= { gnGigabitEthernetStatEntry 1 }
gnGigabitEthernetStatSpeedAndDuplexSupport OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is used only by the element management application.
bit #7 - 1 auto negotiation is supported 0 otherwise (MSB).
bit #6 - 1 1000 full is supported 0 otherwise.
bit #5 - 1 1000 half is supported 0 otherwise.
bit #4 - 1 100 full is supported 0 otherwise.
bit #3 - 1 100 half is supported 0 otherwise.
bit #2 - 1 10 full is supported 0 otherwise.
bit #1 - 1 10 half is supported 0 otherwise.
bit #0 - not used (LSB)."
::= { gnGigabitEthernetStatEntry 2 }
gnGigabitEthernetStatValidIntervals OBJECT-TYPE
SYNTAX INTEGER (0..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of previous valid intervals for which valid data has been stored
for the specific GBE interface."
::= { gnGigabitEthernetStatEntry 3 }
gnGigabitEthernetStatSpeedAndDuplexMode OBJECT-TYPE
SYNTAX INTEGER
{
thousandBasedFullDuplex(3),
thousandBasedHalfDuplex(4),
hundredBasedFullDuplex(5),
hundredBasedHalfDuplex(6),
tenBasedFullDuplex(7),
tenBasedHalfDuplex(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current speed and duplex mode of the giga port."
::= { gnGigabitEthernetStatEntry 4 }
gnGigabitEthernetMon OBJECT IDENTIFIER ::= { gnAccess 13 }
gnGigabitEthernetMonCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGigabitEthernetMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the PM for the gigabit ethernet table. "
::= { gnGigabitEthernetMon 1 }
gnGigabitEthernetMonCurrEntry OBJECT-TYPE
SYNTAX GnGigabitEthernetMonCurrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the PDH
Counters Table. This table contains an interface index for every interface
which type is GBE(VAL_ifType_ethernetCsmacd-6, according to RFC1573)."
INDEX { ifIndex }
::= { gnGigabitEthernetMonCurrTable 1 }
GnGigabitEthernetMonCurrEntry ::=
SEQUENCE {
gnGigabitEthernetMonCurrPacketErrorRate
INTEGER,
gnGigabitEthernetMonCurrIDF
INTEGER,
gnGigabitEthernetMonCurrDayPacketErrorRate
INTEGER,
gnGigabitEthernetMonCurrDayIDF
INTEGER
}
gnGigabitEthernetMonCurrPacketErrorRate OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The packet error rate ( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) )
starting from the present 15 minute period, the calculation is in percent."
::= { gnGigabitEthernetMonCurrEntry 1}
gnGigabitEthernetMonCurrIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag in current 15 minutes interval."
DEFVAL { off }
::= { gnGigabitEthernetMonCurrEntry 2 }
gnGigabitEthernetMonCurrDayPacketErrorRate OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The packet error rate ( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) )
starting from the present 24 hour period, the calculation is in percent."
::= { gnGigabitEthernetMonCurrEntry 3}
gnGigabitEthernetMonCurrDayIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag in current 24 hour interval."
DEFVAL { off }
::= { gnGigabitEthernetMonCurrEntry 4 }
gnGigabitEthernetMonIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGigabitEthernetMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the PM of the GBE per interval."
::= { gnGigabitEthernetMon 2 }
gnGigabitEthernetMonIntervalEntry OBJECT-TYPE
SYNTAX GnGigabitEthernetMonIntervalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the GBE PM Table. This table contains an interface index for every interface
which type is GBE(VAL_ifType_ethernetCsmacd-6, according to RFC1573).
This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes.
The oldest is 96."
INDEX { ifIndex, gnGigabitEthernetMonIntervalIdx}
::= { gnGigabitEthernetMonIntervalTable 1 }
GnGigabitEthernetMonIntervalEntry ::=
SEQUENCE {
gnGigabitEthernetMonIntervalIdx
INTEGER,
gnGigabitEthernetMonIntervalPacketErrorRate
INTEGER,
gnGigabitEthernetMonIntervalIDF
INTEGER
}
gnGigabitEthernetMonIntervalIdx OBJECT-TYPE
SYNTAX INTEGER (0..96)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96."
::= { gnGigabitEthernetMonIntervalEntry 1 }
gnGigabitEthernetMonIntervalPacketErrorRate OBJECT-TYPE
SYNTAX INTEGER(0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The packet error rate per interval( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) )
per 15 minutes interval, the calculation is in percent."
::= { gnGigabitEthernetMonIntervalEntry 2}
gnGigabitEthernetMonIntervalIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnGigabitEthernetMonIntervalEntry 3 }
gnGigabitEthernetMonDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnGigabitEthernetMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table maintains the PM of the GBE per 24 hours interval."
::= { gnGigabitEthernetMon 3 }
gnGigabitEthernetMonDayEntry OBJECT-TYPE
SYNTAX GnGigabitEthernetMonDayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the GBE PM Table. This table contains an interface index for every interface
which type is GBE(VAL_ifType_ethernetCsmacd-6, according to RFC1573).
This table is indexed by an interval index, between 1
to 30 and representing each one 24 hours.
The oldest is 30."
INDEX { ifIndex, gnGigabitEthernetMonDayIdx}
::= { gnGigabitEthernetMonDayTable 1 }
GnGigabitEthernetMonDayEntry ::=
SEQUENCE {
gnGigabitEthernetMonDayIdx
INTEGER,
gnGigabitEthernetMonDayPacketErrorRate
INTEGER,
gnGigabitEthernetMonDayIDF
INTEGER
}
gnGigabitEthernetMonDayIdx OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30."
::= { gnGigabitEthernetMonDayEntry 1 }
gnGigabitEthernetMonDayPacketErrorRate OBJECT-TYPE
SYNTAX INTEGER(0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The packet error rate per interval( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) )
per 24 hour interval, the calculation is in percent."
::= { gnGigabitEthernetMonDayEntry 2}
gnGigabitEthernetMonDayIDF OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDF = Invalid Data Flag."
DEFVAL { off }
::= { gnGigabitEthernetMonDayEntry 3 }
gnEthStatistic OBJECT IDENTIFIER ::= { gnAccess 14 }
gnEthStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF GnEthStatisticEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table illustrate the gigabit ethernet statistics."
::= { gnEthStatistic 1 }
gnEthStatisticEntry OBJECT-TYPE
SYNTAX GnEthStatisticEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is an entry in the gigabit ethernet statistics table.
This table illustrate the MSB value of the RMON II statistics."
INDEX { ifIndex }
::= { gnEthStatisticTable 1 }
GnEthStatisticEntry ::=
SEQUENCE {
gnEthStatisticIfInOctetsMsb
Counter,
gnEthStatisticAFrameReceivedOkLsb
Counter,
gnEthStatisticAFrameReceivedOkMsb
Counter,
gnEthStatisticCRCAlignErrorsMsb
Counter,
gnEthStatisticIfInUcastPktsMsb
Counter,
gnEthStatisticBroadcastPktsMsb
Counter,
gnEthStatisticMulticastPktsMsb
Counter,
gnEthStatisticUndersizePktsMsb
Counter,
gnEthStatisticOversizePktsMsb
Counter,
gnEthStatisticPkts64OctetMsb
Counter,
gnEthStatisticPkts65to127OctetMsb
Counter,
gnEthStatisticPkts128to255OctetMsb
Counter,
gnEthStatisticPkts256to511OctetMsb
Counter,
gnEthStatisticPkts512to1023OctetMsb
Counter,
gnEthStatisticPkts1024to1518OctetMsb
Counter,
gnEthStatisticRadioTransmitFramesLsb
Counter,
gnEthStatisticRadioTransmitFramesMsb
Counter,
gnEthStatisticDroppedPacketsLsb
Counter,
gnEthStatisticDroppedPacketsMsb
Counter,
gnEthStatisticRadioReceivedFramesLsb
Counter,
gnEthStatisticRadioReceivedFramesMsb
Counter,
gnEthStatisticRadioReceivedCrcFramesLsb
Counter,
gnEthStatisticRadioReceivedCrcFramesMsb
Counter,
gnEthStatisticRadioSyncUnlockEventsLsb
Counter,
gnEthStatisticRadioSyncUnlockEventsMsb
Counter,
gnEthStatisticAFrameTransmittedOkLsb
Counter,
gnEthStatisticAFrameTransmittedOkMsb
Counter,
gnEthStatisticIfOutOctetsMsb
Counter,
gnEthStatisticEtherStatsPktsMsb
Counter,
gnEthStatisticEtherStatsOctetsMsb
Counter
}
gnEthStatisticIfInOctetsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of octets received on the
interface, including framing characters (MSB)."
::= { gnEthStatisticEntry 1 }
gnEthStatisticAFrameReceivedOkLsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sum of frames received without error (LSB)."
::= { gnEthStatisticEntry 2 }
gnEthStatisticAFrameReceivedOkMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sum of frames received without error (MSB)."
::= { gnEthStatisticEntry 3 }
gnEthStatisticCRCAlignErrorsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error), (MSB)."
::= { gnEthStatisticEntry 4 }
gnEthStatisticIfInUcastPktsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of subnetwork-unicast packets
delivered to a higher-layer protocol (MSB)."
::= { gnEthStatisticEntry 5 }
gnEthStatisticBroadcastPktsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of good packets received that were
directed to the broadcast address. Note that this
does not include multicast packets (MSB)."
::= { gnEthStatisticEntry 6 }
gnEthStatisticMulticastPktsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of good packets received that were
directed to a multicast address. Note that this number
does not include packets directed to the broadcast
address (MSB)."
::= { gnEthStatisticEntry 7 }
gnEthStatisticUndersizePktsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed (MSB)."
::= { gnEthStatisticEntry 8 }
gnEthStatisticOversizePktsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets received that were
longer than 12000 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed. (MSB)"
::= { gnEthStatisticEntry 9 }
gnEthStatisticPkts64OctetMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets (including bad
packets) received that were 64 octets in length
(excluding framing bits but including FCS octets), (MSB)."
::= { gnEthStatisticEntry 10 }
gnEthStatisticPkts65to127OctetMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets), (MSB)."
::= { gnEthStatisticEntry 11 }
gnEthStatisticPkts128to255OctetMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets), (MSB)."
::= { gnEthStatisticEntry 12 }
gnEthStatisticPkts256to511OctetMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets), (MSB)."
::= { gnEthStatisticEntry 13 }
gnEthStatisticPkts512to1023OctetMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets), (MSB)."
::= { gnEthStatisticEntry 14 }
gnEthStatisticPkts1024to1518OctetMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets), (MSB)."
::= { gnEthStatisticEntry 15 }
gnEthStatisticRadioTransmitFramesLsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sum of frame transmitted to radio (LSB)"
::= { gnEthStatisticEntry 16 }
gnEthStatisticRadioTransmitFramesMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sum of frame transmitted to radio (MSB)"
::= { gnEthStatisticEntry 17 }
gnEthStatisticDroppedPacketsLsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"number of frames dropped (LSB)"
::= { gnEthStatisticEntry 18 }
gnEthStatisticDroppedPacketsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"number of frames dropped (MSB)"
::= { gnEthStatisticEntry 19 }
gnEthStatisticRadioReceivedFramesLsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sum of frames received by radio (LSB)"
::= { gnEthStatisticEntry 20 }
gnEthStatisticRadioReceivedFramesMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sum of frames received by radio (MSB)"
::= { gnEthStatisticEntry 21 }
gnEthStatisticRadioReceivedCrcFramesLsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"sum of frames received with error (LSB)"
::= { gnEthStatisticEntry 22 }
gnEthStatisticRadioReceivedCrcFramesMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"sum of frames received with error (MSB)"
::= { gnEthStatisticEntry 23 }
gnEthStatisticRadioSyncUnlockEventsLsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"sum of GFP not locked events (LSB)"
::= { gnEthStatisticEntry 24 }
gnEthStatisticRadioSyncUnlockEventsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"sum of GFP not locked events (MSB)"
::= { gnEthStatisticEntry 25 }
gnEthStatisticAFrameTransmittedOkLsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sum of valid frames transmitted to line (LSB)."
::= { gnEthStatisticEntry 26 }
gnEthStatisticAFrameTransmittedOkMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sum of valid frames transmitted to line (MSB)."
::= { gnEthStatisticEntry 27 }
gnEthStatisticIfOutOctetsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters (MSB)."
::= { gnEthStatisticEntry 28 }
gnEthStatisticEtherStatsPktsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets (including bad packets,
broadcast packets, and multicast packets) received (MSB)."
::= { gnEthStatisticEntry 29 }
gnEthStatisticEtherStatsOctetsMsb OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets)."
::= { gnEthStatisticEntry 30 }
gnLastDummy OBJECT IDENTIFIER ::= { ceragon 9 }
gnLastDummyParam OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This parameter specifies the end of MIB."
::= { gnLastDummy 1 }
-- Traps
gnODUTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText ,
gnGenStatDeviceODUStatus,gnGenCfgIDUSerialNumber }
DESCRIPTION
"The trap is sent every time an alarm occurs in the ODU."
::= 1
gnIDUTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText ,
gnGenDrawerXDeviceIDUStatus,gnGenCfgIDUSerialNumber}
DESCRIPTION
"The trap is sent every time an alarm occurs in the IDU."
::= 2
gnSDHTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText ,
gnGenStatDeviceRSTStatus,gnGenCfgIDUSerialNumber}
DESCRIPTION
"The trap is sent every time an alarm occurs in the Regenerator section
in
the SONET/SDH."
::= 3
gnACCESSTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText ,
gnGenCfgIDUSerialNumber}
DESCRIPTION
"The trap is sent every time an alarm occurs in an Access line."
::= 4
gnODUTrapCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceODUStatus,gnGenCfgIDUSerialNumber }
DESCRIPTION
"The trap is sent every time an alarm occurs in the ODU."
::= 5
gnIDUTrapCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenDrawerXDeviceIDUStatus,gnGenCfgIDUSerialNumber}
DESCRIPTION
"The trap is sent every time an alarm occurs in the IDU."
::= 6
gnSDHTrapCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceRSTStatus,gnGenCfgIDUSerialNumber}
DESCRIPTION
"The trap is sent every time an alarm occurs in the Regenerator section in
the SONET/SDH."
::= 7
gnAccessTrapCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgIDUSerialNumber}
DESCRIPTION
"The trap is sent every time an alarm occurs in an Access line."
::= 8
-- Event Traps
gnLODUPowerFailTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusPowerSupply,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local ODU Power fault occurs. "
::= 10
gnLODUSynthUnLockTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusSynthesizerVCOLock,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local ODU Hardware fault occurs ."
::= 11
gnLODUTxLevelOutOfRangeTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusTransmitLevel,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local ODU TX signal is out of range. "
::= 12
gnLODURxLevelOutOfRangeTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusReceiveLevel,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local ODU RX signal is out of range. "
::= 13
gnLODUExtremeTempTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusFahrenheitTemp,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local ODU extreme temperature event occurs. "
::= 14
gnLIDUPowerFailTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDevicePowerSupply,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local IDU Power fault occurs. "
::= 15
gnLCableFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceCable,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local IDU-ODU cable fault occurs."
::= 16
gnLModemFailTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Modem faults occurs."
::= 17
gnLIDUExtremeTempTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceFahrenheitTemp,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local IDU extreme temperature event occurs. "
::= 18
gnLLoopbackOnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loopback is activated."
::= 19
gnLRemoteCommFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the remote communication is disconnected. "
::= 20
gnLTestRunningTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstCfgTestActivate,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local SDH/SONET test is activated. "
::= 21
gnLLOFTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loss of Frame alarm occurs."
::= 22
gnLLOSTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loss of signal alarm occurs."
::= 23
gnLTIMTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Trace Identifier Mismatch alarm occurs."
::= 24
gnLEXCTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur ,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Excessive BER alarm is raised. "
::= 25
gnLSDTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Signal Degrade alarm is raised."
::= 26
gnLRcvAisTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the local terminal receives an Alarm Indication Signal (AIS)."
::= 27
gnLUnExpTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local terminal receives an unexpected signal."
::= 28
gnLLocTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loss of Clock alarm occurs."
::= 29
---
gnLLopTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loss of pointer alarm occurs."
::= 30
gnLRdiTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the local terminal receives a Remote Defect Identifier signal (RDI). "
::= 31
gnLSlmTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Signal (Payload) Label Mismatch alarm occurs."
::= 32
gnLUnqTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local unequipped signal is received. "
::= 33
---
gnLExternalAlarm1OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 1 is raised. "
::= 34
gnLExternalAlarm2OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 2 is raised. "
::= 35
gnLExternalAlarm3OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 3 is raised. "
::= 36
gnLExternalAlarm4OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 4 is raised. "
::= 37
gnLExternalAlarm5OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 5 is raised. "
::= 38
gnLExternalAlarm6OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 6 is raised. "
::= 39
gnLExternalAlarm7OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 7 is raised. "
::= 40
gnLExternalAlarm8OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 8 is raised. "
::= 41
gnLSystemFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenDrawerXInternalCommunication,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local System fault occurs."
::= 42
gnLTftpFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local TFTP Download fails."
::= 43
gnLInternalDownloadFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local internal Download fails."
::= 44
gnLIntralinkFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local intra-link download fails."
::= 45
gnLConfMismatchTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local configuration mismatch fault occurs."
::= 46
gnLProtectSwitchFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Protection fault is raised."
::= 47
gnLProtectCableFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local protection cable fault is raised."
::= 48
gnLHeartBeatTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is a periodic heart beat trap."
::= 49
gnLLomTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loss of Multi-frame alarm occurs."
::= 50
gnLHitlessProblemTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Hitless fault occurs."
::= 51
gnLHitlessRadioLofTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Hitless RadioLOF fault occurs."
::= 52
gnLHitlessCableDisconnectTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Hitless cable fault is raised. "
::= 53
gnLPamTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when system in MSP Protection Architecture Mismatch."
::= 54
gnLScmTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when there is a MSP Selector Channel Mismatch (K1,K2)."
::= 55
gnLInvTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap indicates that the received K1 byte is invalid (MSP)."
::= 56
gnLInbandTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when the Inband PPP link goes down."
::= 57
gnWSLOSTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when the Wayside channel is in LOS state."
::= 58
gnODUtoODUCableFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when there is a problem with the ODU to ODU cable - for XPIC topology only."
::= 59
gnNoSignalReceivedFromODUTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when no signal is received from the ODU."
::= 60
gnProtectionLockoutConfiguredTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when Protection lockout is configured."
::= 61
gnRFUPowerFailureTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of 12V/-5V/1.5V/6V/Vdrain power supply failure ."
::= 62
gnRFURxLevelPathOutOfRangeTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of RSL of Main/Diversity channel is very low(typically below -80dBm) ."
::= 63
gnRFUExtremeTemperatureTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of RFU temperature is too high/low ."
::= 64
gnRFUFanFailureTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of fan failure detection by RFU ."
::= 65
gnLowSignalToRFUTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of low IDM signal reception (350MHz) ."
::= 66
gnRFUXPICClockFailureTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of XPIC clock failure ."
::= 67
gnRFUDelayCalibrationFailure1Trap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent if RX AGC is not locked (-10dBm) ."
::= 68
gnRFUDelayCalibrationFailure2Trap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent if calibration cannot be done since the notch is too wide/deep ."
::= 69
gnLSFPFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Gigabit ethernet SFP fault occurs."
::= 70
gnEncryptionFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption fault occurs."
::= 71
gnEncryptionSyncLosTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption synchhronization loss occurs."
::= 72
gnEncryptionKepTimout TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption KEP Timout fault occurs."
::= 73
gnEncryptionSkTimerElapsed TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption Session Key Timer elapsed."
::= 74
gnEncryptionPowerUpSelfTestFail TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption Power Up Self Test fault occurs."
::= 75
gnEncryptionConditionalTestFail TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption Conditional Test fault occurs."
::= 76
gnEncryptionWillTurnOffOnNextRest TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption will be turned off on the next reset occurs."
::= 77
gnEncryptionEventReport TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption event report occurs."
::= 78
gnEncryptionTechCardWasDetected TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time Encryption Technician card is detected."
::= 79
gnAdminPasswordInDefaultState TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a admin password is in default state."
::= 80
gnLinkGroupingProtectionFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of Link Grouping Protection Fault."
::= 81
gnLossOfProtectionTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of Loss of Protection."
::= 82
gnTempLicenseTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of Temp License is Enable."
::= 83
gnMultiRadioProblemTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a multi radio fault occurs."
::= 84
-- ********************
gnLODUPowerOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusPowerSupply,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local ODU Power fault cleared."
::= 110
gnLODUSynthLockTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusSynthesizerVCOLock,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local ODU Hardware fault is cleared."
::= 111
gnLODUTxLevelInRangeTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusTransmitLevel,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local ODU TX signal is in range. "
::= 112
gnLODURxLevelInRangeTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusReceiveLevel,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local ODU RX signal is in range. "
::= 113
gnLODUNormalTempTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusFahrenheitTemp,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local ODU returns to normal temperature."
::= 114
gnLIDUPowerOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDevicePowerSupply,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local IDU Power fault is cleared."
::= 115
gnLCableOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceCable,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local IDU-ODU cable fault is cleared."
::= 116
gnLModemOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Modem faults is cleared. "
::= 117
gnLIDUNormalTempTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceFahrenheitTemp,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local IDU returns to normal temperature."
::= 118
gnLLoopbackOffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loopback is cleared."
::= 119
gnLRemoteCommOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the remote communication is re-connected."
::= 120
gnLNoTestRunningTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstCfgTestActivate,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local SDH/SONET test is cleared."
::= 121
gnLNoLOFTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loss of Frame alarm is cleared."
::= 122
gnLNoLOSTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loss of Signal alarm is cleared."
::= 123
gnLNoTIMTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Trace Identifier Mismatch alarm is cleared."
::= 124
gnLNoEXCTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Excessive BER alarm is cleared. "
::= 125
gnLNoSDTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Signal Degrade alarm is cleared."
::= 126
gnLNoAisTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the local terminal stops receiving an Alarm Indication Signal (AIS)."
::= 127
gnLNoUnExpTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local terminal stops receiving an unexpected signal."
::= 128
gnLNoLocTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loss of Carrier (On the FE interfaces) alarm is cleared."
::= 129
---
gnLNoLopTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loss of pointer alarm is cleared."
::= 130
gnLNoRdiTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the local terminal stops receiving a Remote Defect Identifier signal (RDI)."
::= 131
gnLNoSlmTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Signal (Payload) Label Mismatch alarm is cleared. "
::= 132
gnLNoUnqTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local terminal start receiving an equipped signal. "
::= 133
---
gnLExternalAlarm1OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 1 is cleared. "
::= 134
gnLExternalAlarm2OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 2 is cleared. "
::= 135
gnLExternalAlarm3OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 3 is cleared. "
::= 136
gnLExternalAlarm4OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 4 is cleared. "
::= 137
gnLExternalAlarm5OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 5 is cleared. "
::= 138
gnLExternalAlarm6OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 6 is cleared. "
::= 139
gnLExternalAlarm7OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 7 is cleared. "
::= 140
gnLExternalAlarm8OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local External alarm 8 is cleared."
::= 141
gnLSystemOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenDrawerXInternalCommunication,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local System fault is cleared."
::= 142
gnLTftpOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local TFTP Download succeeded."
::= 143
gnLInternalDownloadOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local internal Download succeeded."
::= 144
gnLIntralinkOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local intra-link download succeeded."
::= 145
gnLNoConfMismatchTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local configuration mismatch fault is cleared."
::= 146
gnLProtectSwitchOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"Never sent. "
::= 147
gnLProtectCableOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local protection cable fault is cleared."
::= 148
gnLLomOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Loss of Multi-frame alarm is cleared."
::= 150
gnLHitlessProblemOKTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Hitless fault is cleared."
::= 151
gnLHitlessRadioLofOKTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Hitless RadioLOF fault is cleared."
::= 152
gnLHitlessCableDisconnectOKTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Local Hitless cable fault is cleared."
::= 153
gnLPamOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when system in MSP Protection Architecture Mismatch."
::= 154
gnLScmOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when there is a MSP Selector Channel Mismatch (K1,K2)."
::= 155
gnLInvOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap indicates that the received K1 byte is invalid (MSP)."
::= 156
gnLInbandOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when the Inband PPP link goes up."
::= 157
gnWSNoLOSTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES { gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when the Wayside channel is in LOS state."
::= 158
gnODUtoODUCableOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when there is a problem with the ODU to ODU cable - for XPIC topology only."
::= 159
gnSignalReceivedFromODUTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when a signal is received from the ODU."
::= 160
gnProtectionLockoutClearededTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
" This Trap is sent when Protection lockout is cleared."
::= 161
gnRFUPowerFailureClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of 12V/-5V/1.5V/6V/Vdrain power supply failure is cleared."
::= 162
gnRFURxLevelPathOutOfRangeClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of RSL of Main/Diversity channel is not very low ."
::= 163
gnRFUExtremeTemperatureClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of RFU temperature is not too high/low ."
::= 164
gnRFUFanFailureClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent when fan failure is cleared ."
::= 165
gnLowSignalToRFUClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of not low IDM signal reception ."
::= 166
gnRFUXPICClockFailureClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case of XPIC clock failure is cleared ."
::= 167
gnRFUDelayCalibrationFailure1ClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent if RX AGC is locked ."
::= 168
gnRFUDelayCalibrationFailure2ClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent if calibration can be done ."
::= 169
gnLSFPOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Gigabit ethernet SFP fault clears."
::= 170
gnEncryptionFaultClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption fault clears."
::= 171
gnEncryptionSyncLosClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption synchronization loss fault clears."
::= 172
gnEncryptionKepTimoutCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption KEP timout fault clears."
::= 173
gnEncryptionSkTimerElapsedCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a encryption Encryption Session Key Timer elapsed fault clears."
::= 174
gnEncryptionPowerUpSelfTestFailCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption Power Up Self Test fault clears."
::= 175
gnEncryptionConditionalTestFailCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption Conditional Test fault clears."
::= 176
gnEncryptionWillTurnOffOnNextRestCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption will be turned off on the next reset clears."
::= 177
gnEncryptionEventReportCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption event report fault clears."
::= 178
gnEncryptionTechCardWasDetectedCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Encryption Technician card is detected clears."
::= 179
gnAdminPasswordInDefaultStateCleared TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a admin password is in default state clears."
::= 180
gnLinkGroupingProtectionFaultClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case the Link Grouping Protection Fault clears."
::= 181
gnLossOfProtectionClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case the Loss of Protection clears."
::= 182
gnTempLicenseClearedTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent in case the Temp License Enable clears."
::= 183
gnMultiRadioProblemOKTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a multi radio fault is cleared."
::= 184
-- ********************
gnRODUPowerFailTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusPowerSupply,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote ODU Power fault occurs."
::= 210
gnRODUSynthUnLockTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusSynthesizerVCOLock,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote ODU Hardware fault occurs ."
::= 211
gnRODUTxLevelOutOfRangeTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusTransmitLevel,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote ODU TX signal is out of range."
::= 212
gnRODURxLevelOutOfRangeTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusReceiveLevel,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote ODU RX signal is out of range."
::= 213
gnRODUExtremeTempTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusFahrenheitTemp,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote ODU extreme temperature event occurs."
::= 214
gnRIDUPowerFailTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDevicePowerSupply,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote IDU Power fault occurs."
::= 215
gnRCableFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceCable,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote IDU-ODU cable fault occurs."
::= 216
gnRModemFailTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Modem faults occurs."
::= 217
gnRIDUExtremeTempTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceFahrenheitTemp,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote IDU extreme temperature event occurs."
::= 218
gnRLoopbackOnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loopback is activated."
::= 219
gnRRemoteCommFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the remote communication is disconnected."
::= 220
gnRTestRunningTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstCfgTestActivate,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote SDH/SONET test is activated."
::= 221
gnRLOFTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loss of Frame alarm occurs."
::= 222
gnRLOSTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loss of signal alarm occurs."
::= 223
gnRTIMTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Trace Identifier Mismatch alarm occurs."
::= 224
gnREXCTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Excessive BER alarm is raised."
::= 225
gnRSDTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Signal Degrade alarm is raised."
::= 226
gnRAisTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the Remote terminal receives an Alarm Indication Signal (AIS)."
::= 227
gnRUnExpTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote terminal receives an unexpected signal."
::= 228
gnRLocTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loss of Carrier (On the FE interfaces) alarm occurs."
::= 229
---
gnRLopTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loss of pointer alarm occurs."
::= 230
gnRRdiTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the Remote terminal receives a Remote Defect Identifier signal (RDI)."
::= 231
gnRSlmTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Signal (Payload) Label Mismatch alarm occurs."
::= 232
gnRUnqTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote unequipped signal is received."
::= 233
---
gnRExternalAlarm1OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 1 is raised."
::= 234
gnRExternalAlarm2OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 2 is raised."
::= 235
gnRExternalAlarm3OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 3 is raised."
::= 236
gnRExternalAlarm4OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 4 is raised."
::= 237
gnRExternalAlarm5OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 5 is raised."
::= 238
gnRExternalAlarm6OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 6 is raised."
::= 239
gnRExternalAlarm7OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 7 is raised."
::= 240
gnRExternalAlarm8OnTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 8 is raised."
::= 241
gnRSystemFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatInternalCommunication,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote System fault occurs."
::= 242
gnRTftpFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote TFTP Download fails."
::= 243
gnRInternalDownloadFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote internal Download fails."
::= 244
gnRIntralinkFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote intra-link download fails."
::= 245
gnRConfMismatchTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote configuration mismatch fault occurs."
::= 246
gnRProtectSwitchFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Protection fault is raised."
::= 247
gnRProtectCableFaultTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote protection cable fault is raised."
::= 248
gnRHeartBeatTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is a periodic heart beat trap."
::= 249
gnRLomTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loss of Multi-frame alarm occurs."
::= 250
--gnRHitlessProblemTrap TRAP-TYPE
-- ENTERPRISE ceragon
-- VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
-- DESCRIPTION
-- "This Trap is sent every time a Remote Hitless fault occurs."
-- ::= 251
gnRHitlessRadioLofTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Hitless RadioLOF fault occurs."
::= 252
gnRHitlessCableDisconnectTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Hitless cable fault is raised."
::= 253
-- skip 254-256 (MSP PAM, SCM, INV)
-- skip 257 (Inband)
gnRODUPowerOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusPowerSupply,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote ODU Power fault cleared."
::= 310
gnRODUSynthLockTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusSynthesizerVCOLock,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote ODU Hardware fault is cleared."
::= 311
gnRODUTxLevelInRangeTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusTransmitLevel,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote ODU TX signal is in range."
::= 312
gnRODURxLevelInRangeTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusReceiveLevel,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote ODU RX signal is in range."
::= 313
gnRODUNormalTempTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusFahrenheitTemp,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote ODU returns to normal temperature."
::= 314
gnRIDUPowerOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDevicePowerSupply,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote IDU Power fault is cleared."
::= 315
gnRCableOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceCable,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote IDU-ODU cable fault is cleared."
::= 316
gnRModemOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Modem faults is cleared."
::= 317
gnRIDUNormalTempTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceFahrenheitTemp,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote IDU returns to normal temperature."
::= 318
gnRLoopbackOffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loopback is cleared."
::= 319
gnRRemoteCommOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the remote communication is re-connected."
::= 320
gnRNoTestRunningTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstCfgTestActivate,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote SDH/SONET test is cleared."
::= 321
gnRNoLOFTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loss of Frame alarm is cleared."
::= 322
gnRNoLOSTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loss of Signal alarm is cleared."
::= 323
gnRNoTIMTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Trace Identifier Mismatch alarm is cleared."
::= 324
gnRNoEXCTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Excessive BER alarm is cleared."
::= 325
gnRNoSDTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Signal Degrade alarm is cleared."
::= 326
gnRNoAisTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the Remote terminal stops receiving an Alarm Indication Signal (AIS)."
::= 327
gnRNoUnExpTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote terminal stops receiving an unexpected signal."
::= 328
gnRNoLocTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loss of Carrier (on the FE interfaces) alarm is cleared."
::= 329
---
gnRNoLopTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loss of pointer alarm is cleared."
::= 330
gnRNoRdiTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time the Remote terminal stops receiving a Remote Defect Identifier signal (RDI)."
::= 331
gnRNoSlmTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Signal (Payload) Label Mismatch alarm is cleared."
::= 332
gnRNoUnqTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote terminal start receiving an equipped signal."
::= 333
---
gnRExternalAlarm1OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 1 is cleared."
::= 334
gnRExternalAlarm2OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 2 is cleared."
::= 335
gnRExternalAlarm3OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 3 is cleared."
::= 336
gnRExternalAlarm4OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 4 is cleared."
::= 337
gnRExternalAlarm5OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 5 is cleared."
::= 338
gnRExternalAlarm6OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 6 is cleared."
::= 339
gnRExternalAlarm7OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 7 is cleared."
::= 340
gnRExternalAlarm8OffTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote External alarm 8 is cleared."
::= 341
gnRSystemOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatInternalCommunication,gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote System fault is cleared."
::= 342
gnRTftpOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote TFTP Download succeeded."
::= 343
gnRInternalDownloadOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remoteinternal Download succeeded."
::= 344
gnRIntralinkOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote intra-link download succeeded."
::= 345
gnRNoConfMismatchTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote configuration mismatch fault is cleared."
::= 346
-- "positive" traps are not being send when protection switch occurs.
-- gnRProtectSwitchOkTrap TRAP-TYPE
-- ENTERPRISE ceragon
-- VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
-- DESCRIPTION
-- "Never sent."
-- ::= 347
gnRProtectCableOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote protection cable fault is cleared."
::= 348
gnRLomOkTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Loss of Multi-frame alarm is cleared."
::= 350
--gnRHitlessProblemOKTrap TRAP-TYPE
-- ENTERPRISE ceragon
-- VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
-- DESCRIPTION
-- "This Trap is sent every time a Remote Hitless fault is cleared."
-- ::= 351
gnRHitlessRadioLofOKTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Hitless RadioLOF fault is cleared."
::= 352
gnRHitlessCableDisconnectOKTrap TRAP-TYPE
ENTERPRISE ceragon
VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI}
DESCRIPTION
"This Trap is sent every time a Remote Hitless cable fault is cleared."
::= 353
-- skip 354-356 (MSP PAM, SCM, INV)
-- skip 357 (Inband)
-- Traps #400-600 are reserved for Managment.
END
View Git Blame Copy Permalink