CERAGON-MIB DEFINITIONS ::= BEGIN --Title: CERAGON MIB -- Copyright 1997 CERAGON. -- All Rights Reserved. -- It is CERAGON's intent to encourage the widespread use of -- this Specification in connection with the management of -- CERAGON's products. CERAGON grants vendors, end-users, -- and other interested parties a non-exclusive license to -- use this Specification in connection with the management -- of CERAGON's products. -- This Specification is supplied "as is," and CERAGON makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. IMPORTS Counter, enterprises, IpAddress, Gauge FROM RFC1155-SMI DisplayString, ifIndex FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; -- Gauge32 FROM SNMPv2-SMI; -- sonetSectionCurrentStatus FROM SONET-MIB; -- RowStatus FROM SNMPv2-TC; -- Some MIB compilers need those two lines: -- enterprises OBJECT IDENTIFIER ::= -- { iso org(3) dod(6) internet(1) private(4) 1 } ceragon OBJECT IDENTIFIER ::= { enterprises 2281 } -- Version: 5.05e -- ***************************** 1500P **************************** -- Supported by IDC version 4.95xx for Regenerator and Jupiter (DS3). -- Supported by IDC version O2.88 for Omega (Encryption). -- Supported by IDC version 4.96x for Falcon (FE+8E1\T1). -- Supported by IDC version 5.10xx for Typhoon (GbE+8E1\T1) -- Supported by IDC version 4.9xxx for Summit (64E1\T1+FE) -- ***************************** 3200T **************************** -- Supported by IDC version 5.0xxx for AVALON (N+1) -- ***************************** 1500 ***************************** -- Supported by IDC version 5.22 for (FibeAir15xx) --First Version Date: 15.04.97 --Last Update: 15.05.2007 gnOID OBJECT IDENTIFIER ::= { ceragon 1} -- list of products gnFirstOID OBJECT IDENTIFIER ::= { gnOID 1 } -- First product gnSystem OBJECT IDENTIFIER ::= { ceragon 2 } --This group contains general parameters of the system. gnGeneral OBJECT IDENTIFIER ::= { gnSystem 1} --gnGenHWVersion OBJECT-TYPE -- SYNTAX DisplayString -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "This parameter specifies the version of the hardware." -- ::= { gnGeneral 1 } --gnGenSWVersion OBJECT-TYPE -- SYNTAX DisplayString -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "This parameter specifies the version of the software." -- ::= { gnGeneral 2 } gnGenStandardOrg OBJECT-TYPE SYNTAX INTEGER { etsi(2), fcc(3), japan(4), lmds(5), cmds(6), australia(7), other(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies which international standard is used." ::= { gnGeneral 1 } gnGenTxFreqRange OBJECT-TYPE SYNTAX INTEGER { from37000to37350(2), -- FCC RX Range: 37700->38050 from37350to37700(3), -- FCC RX Range: 38050->38400 from37700to38050(4), -- FCC from38050to38400(5), -- FCC from38600to38950(6), -- FCC RX Range: 39300->39650 from38950to39300(7), -- FCC RX Range: 39650->40000 from39300to39650(8), -- FCC from39650to40000(9), --FCC from37058to37618(10), --ETSI RX Range: 38318->38878 from37618to38178(11), --ETSI RX Range: 38878->39438 from38318to38878(12), --ETSI from38878to39438(13), --ETSI notUsed(14) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies frequency ranges in Hertz. Value 1 to 13 are used when the link is working with channels. The notUsed value is used when the link is working with frequency." ::= { gnGeneral 2 } gnGenRemoteConnection OBJECT-TYPE SYNTAX INTEGER { connected(2), disconnected(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the connection between the local manager and the remote manager." ::= { gnGeneral 3 } gnGenRemoteDistance OBJECT-TYPE SYNTAX INTEGER (100..30000) ACCESS read-write STATUS mandatory DESCRIPTION "This field is the distance between the local and remote ODU, in meters. This attribute does not auto-detect the distance. It is used as part of the unfaded RSL calculation feature in the element manager." ::= { gnGeneral 4 } gnGenInterLenLocalRemote OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field is the FEC interleaver length - DONT CHANGE THIS FIELD !!!. WRITE will change both local and remote sides." ::= { gnGeneral 5 } gnGenTxFreqLocalRemote OBJECT-TYPE SYNTAX INTEGER (0..20) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the radio TX channel number. WRITE will change both LOCAL and REMOTE sides. Not all radios will support TX frequency change via channel numbers." DEFVAL { 1} ::= { gnGeneral 6} gnGenRealTimeandDate OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter specifies the real time and date Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 07 c8 05 1a 0d 1e 0f 00 ( 1992 -5 -26,13:30:15 ) Note that if only local time is known, then timezone information (fields 8-10) is not present." ::= { gnGeneral 7 } gnGenCfgDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGenCfgDeviceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains general configuration info per device, local and remote." ::= { gnGeneral 8 } gnGenCfgDeviceEntry OBJECT-TYPE SYNTAX GnGenCfgDeviceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing general configuration information, for both local and remote sides." INDEX { gnGenCfgDeviceId } ::= { gnGenCfgDeviceTable 1 } GnGenCfgDeviceEntry ::= SEQUENCE { gnGenCfgDeviceId INTEGER, gnGenCfgDeviceResetPerfMon INTEGER, gnGenCfgDeviceOperation INTEGER, gnGenCfgActivateLoopback INTEGER, gnGenCfgF1DataChanConnector -- was LineConnector; -- if DB9 connector, indicates NEW regenerator hardware. INTEGER, gnGenCfgWaySideConnector --was RadioConnector INTEGER, gnGenCfgActivateChanLoopback INTEGER, gnGenCfgInterLenLocalOnly INTEGER , gnGenCfgSlipIp IpAddress, gnGenCfgSlipModemConnection DisplayString, gnGenCfgSlipSpeed INTEGER, gnGenCfgAlarmSeverity OCTET STRING, gnGenCfgODUSerialNumber DisplayString, gnGenCfgIDUSerialNumber DisplayString, gnGenCfgAlarmText DisplayString, gnGenCfgTrapSeverity INTEGER, gnGenCfgProductType -- merge with tftp INTEGER, gnGenCfgLeftMediumConnector INTEGER, gnGenCfgMiddleMediumConnector INTEGER, gnGenCfgPrimaryClockSource INTEGER, gnGenCfgSecondaryClockSource INTEGER, gnGenCfgTrapOption INTEGER, gnGenCfgCLLI DisplayString, gnGenCfgHeartbeatPeriod INTEGER, gnGenCfgGetRemoteData INTEGER, gnGenCfgClearLoopTimeout INTEGER, gnGenCfgSubProductType INTEGER } gnGenCfgDeviceId OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the device table entry (local or Remote)." ::= { gnGenCfgDeviceEntry 1 } gnGenCfgDeviceResetPerfMon OBJECT-TYPE SYNTAX INTEGER { reset(2), noAction(3), clearFastEthernetStatistics(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Reset performance monitoring. " DEFVAL { noAction } ::= { gnGenCfgDeviceEntry 2 } gnGenCfgDeviceOperation OBJECT-TYPE SYNTAX INTEGER { noOperation(2), softwareReset(3), setDefaultConf(4), clearMainManagerSoftware(5), resetODU(6), resetMUX(7), resetSwOdu(8) -- phos odu only. } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows the NMS to perform operations. (3) will implement software RESET (4) will SET all factory default configurations, including IP address! (5) will CLEAR IDU software NOTE: CLEARING IDU software will cause the IDU to use the factory BOOT software version. 4 and 5 will take place only after reset of the IDU" DEFVAL { noOperation } ::= { gnGenCfgDeviceEntry 3 } gnGenCfgActivateLoopback OBJECT-TYPE SYNTAX INTEGER { noOperation(2), loopbackSPI(3), --- loopbackMUX(4), loopbackMDM(5), loopbackOuterSPI(6), -- localTechnSPIloopback(7), -- localTechnMUXloopback(8), -- localTechnMDMloopback(9), localODUloopback(10) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter controls the loop back diagnostics operations. For remote units, only SPI, MUX and MDM loopbacks are allowed. " DEFVAL { noOperation } ::= { gnGenCfgDeviceEntry 4 } gnGenCfgF1DataChanConnector OBJECT-TYPE SYNTAX INTEGER { noInterface(1), -- No interface rs232db25(2), -- V24 v35(3), rs422db25(4), --RS-530 rj45CoDirect(5), rj45bridge(6), -- Ethernet bridge x21db15(7), rs232db9(8) -- New regenerator hardware } ACCESS read-only STATUS mandatory DESCRIPTION "This is the physical interface of the F1 line data channel (USER CHANNEL connection). " DEFVAL { rs232db25 } ::= { gnGenCfgDeviceEntry 5 } gnGenCfgWaySideConnector OBJECT-TYPE SYNTAX INTEGER { noInterface(1), -- No interface rs232db25(2), -- V24 v35(3), rs422db25(4), -- RS-530 connectorE1(5), rj45bridge(6), -- Ethernet Bridge x21db15(7), connectorT1(8), lineSTM4(9), clockUnit2M(10), clockUnit1dot5M(11) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the physical interface of the radio E1 way side channel (WAYSIDE CHANNEL connection)." DEFVAL { noInterface } ::= { gnGenCfgDeviceEntry 6 } gnGenCfgActivateChanLoopback OBJECT-TYPE SYNTAX INTEGER { noOperation(2), loopbackDataChan(3), loopbackWaySide(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter controls the USER CHANNEL and WAYSIDE channel loopback diagnostic operations. (3) will activate the 64k data channel loopback (USER CHANNEL) (4) will activate the WAYSIDE CHANNEL loopback." DEFVAL { noOperation } ::= { gnGenCfgDeviceEntry 7 } gnGenCfgInterLenLocalOnly OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field is the FEC interleaver length .DONT CAHNGE THIS FIELD !!! . WRITE will change the local side only." ::= { gnGenCfgDeviceEntry 8 } gnGenCfgSlipIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This is the SERIAL interface IP address. Included for future development, not currently supported." ::= { gnGenCfgDeviceEntry 9 } gnGenCfgSlipModemConnection OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The telephone number to which the modem will initialize a call, upon generation of a TRAP. The number must be entered numerically (for example 18001234567)." ::= { gnGenCfgDeviceEntry 10 } gnGenCfgSlipSpeed OBJECT-TYPE SYNTAX INTEGER { baud9600(1), baud19200(2), baud38400(3), baud57600(4), baud115200(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The SERIAL interface baud rate." ::= { gnGenCfgDeviceEntry 11 } gnGenCfgAlarmSeverity OBJECT-TYPE SYNTAX OCTET STRING(SIZE(15)) ACCESS read-write STATUS mandatory DESCRIPTION "This field is used only by the element management application Every Trap severity 4 bits. 15 (MAJOR), 7 (MINOR), 3 (WARNING) and 1 (EVENT) options. The first 4 bits ODU Power supply severity, then the Synthesizer severity ,then Tx level then RX level ODU temperature, ODU loopback , IDU power supply , Cable, Modem, IDU temperature, IDU loopbacks, External Alarm 1, External Alarm 2 ,External Alarm 3, External Alarm 4, External Alarm 5, External Alarm 6, External Alarm 7, External Alarm 8, Remote connectivity, LOF, LOS, EXC, SD J0 mismatch and system fault." ::= { gnGenCfgDeviceEntry 12 } gnGenCfgODUSerialNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODU serial number - up to 20 characters " ::= { gnGenCfgDeviceEntry 13 } gnGenCfgIDUSerialNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the IDU serial number - up to 20 characters " ::= { gnGenCfgDeviceEntry 14} gnGenCfgAlarmText OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The private trap text, describing the last generated trap text." ::= { gnGenCfgDeviceEntry 15} gnGenCfgTrapSeverity OBJECT-TYPE SYNTAX INTEGER { clear (0), event (1), warning (3), minor (7), major (15), critical (31) } ACCESS read-only STATUS mandatory DESCRIPTION "The current Trap severity, describing the last generated trap severity" ::= { gnGenCfgDeviceEntry 16 } -- ******************************************************************* -- The following fields were added for the Access product -- ******************************************************************* gnGenCfgProductType OBJECT-TYPE SYNTAX INTEGER { accessMux (2), sdhRegenerator (3), narrowBandPdhRepeater (4), accessMuxStm0 (5), plex6200 (6), adm (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The product type." ::= { gnGenCfgDeviceEntry 17 } gnGenCfgLeftMediumConnector OBJECT-TYPE SYNTAX INTEGER { noInterface(1), -- No interface twoDS3(2), oneDS3(3), twoE3(4), oneE3(5), oneFastEthernet(6), fiberSTM1(7), electricalSTM1(8), utpSTM1(9), stpSTM1(10), twoSTM1(11), eightE1(12), eightT1(13), hitLess(14), fiberSTM1Trib(15), electricalSTM1Trib(16), hitLessWithBridge(17), opticalFastEthernet(18) } ACCESS read-only STATUS mandatory DESCRIPTION "For ACCESS hardware, this indicates the first (left) interface connector." DEFVAL { twoDS3 } ::= { gnGenCfgDeviceEntry 18 } gnGenCfgMiddleMediumConnector OBJECT-TYPE SYNTAX INTEGER { noInterface(1), -- No interface twoDS3(2), oneDS3(3), twoE3(4), oneE3(5), oneFastEthernet(6), fiberSTM1(7), electricalSTM1(8), utpSTM1(9), stpSTM1(10), twoSTM1(11), eightE1(12), eightT1(13), hitLess(14), fiberSTM1Trib(15), electricalSTM1Trib(16), hitLessWithBridge(17), opticalFastEthernet(18) } ACCESS read-only STATUS mandatory DESCRIPTION "For ACCESS hardware, this indicates the second (right)interface connector." DEFVAL { oneDS3 } ::= { gnGenCfgDeviceEntry 19 } gnGenCfgPrimaryClockSource OBJECT-TYPE SYNTAX INTEGER { internalClock(2), external2MB(3), radioClock(4), fiberClock(5), external2MHz(6), external1AndHalfMB(7), tributaryClock1(8), tributaryClock2(9), tributaryClock3(10), tributaryClock4(11), tributaryClock5(12), tributaryClock6(13), tributaryClock7(14), tributaryClock8(15), tributaryClock9(16), tributaryClock10(17), tributaryClock11(18), tributaryClock12(19), tributaryClock13(20), tributaryClock14(21), tributaryClock15(22), tributaryClock16(23), tribSTM1(24) } ACCESS read-write STATUS mandatory DESCRIPTION "The primary clock source, configurable for ACCESS radios only." DEFVAL { internalClock } ::= { gnGenCfgDeviceEntry 20 } gnGenCfgSecondaryClockSource OBJECT-TYPE SYNTAX INTEGER { internalClock(2), external2MB(3), radioClock(4), fiberClock(5), external2MHz(6), external1AndHalfMB(7), tributaryClock1(8), tributaryClock2(9), tributaryClock3(10), tributaryClock4(11), tributaryClock5(12), tributaryClock6(13), tributaryClock7(14), tributaryClock8(15), tributaryClock9(16), tributaryClock10(17), tributaryClock11(18), tributaryClock12(19), tributaryClock13(20), tributaryClock14(21), tributaryClock15(22), tributaryClock16(23), tribSTM1(24) } ACCESS read-write STATUS mandatory DESCRIPTION "The secondary clock source, configurable for ACCESS radios only." DEFVAL { internalClock } ::= { gnGenCfgDeviceEntry 21 } gnGenCfgTrapOption OBJECT-TYPE SYNTAX INTEGER (0..31) ACCESS read-write STATUS mandatory DESCRIPTION " This item defines various trap options (0-31): 0 - SNSN (STANDARD TRAPS DO NOT INCLUDE SERIAL NUMBER) 1 - ASN (ALL TRAPS INCLUDE SERIAL NUMBER) 2 - SNSN, DNLR (DO NOT REPORT LOCAL TRAPS FROM REMOTE IDU) 3 - ASN, DNLR 4 - SNSN, EVT (USE DIFFERENT TRAP ID FOR EACH ALARM TYPE) 5 - ASN, EVT 6 - SNSN, DNLR, EVT 7 - ASN, DNLR, EVT * - Add 8 to your choice for excluding traps with id >= 128. Example: for SNSN, DNLR with this filter write 10 (=8+2). ** - Add another 16 to your choice in order to send 'clear' traps with zero severity." DEFVAL { 0 } ::= { gnGenCfgDeviceEntry 22 } gnGenCfgCLLI OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION " Common Language Location Identifier (maximum length: 30)" ::= { gnGenCfgDeviceEntry 23 } gnGenCfgHeartbeatPeriod OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION " This item defines the number of minutes between each trap" DEFVAL { 0 } ::= { gnGenCfgDeviceEntry 24 } gnGenCfgGetRemoteData OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-write STATUS mandatory DESCRIPTION "." DEFVAL {off} ::= { gnGenCfgDeviceEntry 25 } gnGenCfgClearLoopTimeout OBJECT-TYPE SYNTAX INTEGER (0..1440) ACCESS read-write STATUS mandatory DESCRIPTION " This item defines the clear loopbacks timeout in minutes. possible values: 0..1440. 0 means disable. " DEFVAL { 0 } ::= { gnGenCfgDeviceEntry 26 } gnGenCfgSubProductType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "lsb bit: 1 if 1500i or 1528i 0 otherwise." ::= { gnGenCfgDeviceEntry 27 } gnGenStatDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGenStatDeviceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains general configuration info per device; local and remote." ::= { gnGeneral 9 } gnGenStatDeviceEntry OBJECT-TYPE SYNTAX GnGenStatDeviceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing general configuration information per device, both local and remote sides." INDEX { gnGenStatDeviceId } ::= { gnGenStatDeviceTable 1 } GnGenStatDeviceEntry ::= SEQUENCE { gnGenStatDeviceId INTEGER, gnGenStatDeviceCelsiusTemp INTEGER, gnGenStatDeviceFahrenheitTemp INTEGER, -- The following variables are concerning the service of the IDU gnGenStatDevicePowerSupply OCTET STRING, gnGenStatDeviceCable INTEGER, gnGenStatDeviceDryContact OCTET STRING, gnGenStatDeviceLeds OCTET STRING, gnGenStatInternalCommunication OCTET STRING , gnGenStatDeviceFanStatus OCTET STRING, gnGenStatDeviceODUStatus OCTET STRING, gnGenStatDeviceIDUStatus OCTET STRING, gnGenStatDeviceRSTStatus OCTET STRING } gnGenStatDeviceId OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2), drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates which device is involved in the specific row." ::= { gnGenStatDeviceEntry 1 } gnGenStatDeviceCelsiusTemp OBJECT-TYPE SYNTAX INTEGER (-10..70) ACCESS read-only STATUS mandatory DESCRIPTION "This is the temperature of the modem of the IDU in degrees of Celsius." ::= { gnGenStatDeviceEntry 2 } gnGenStatDeviceFahrenheitTemp OBJECT-TYPE SYNTAX INTEGER (14..158) ACCESS read-only STATUS mandatory DESCRIPTION "This is the temperature of the modem of the IDU in degrees of Fahrenheit." ::= { gnGenStatDeviceEntry 3 } gnGenStatDevicePowerSupply OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This octet represents the status of the power supplies of the IDU: bit 1 on = 3.3V faulty bit 2 on = -5V faulty bit 3 on = 5V faulty. bit 4 on = +8V faulty " ::= { gnGenStatDeviceEntry 4 } gnGenStatDeviceCable OBJECT-TYPE SYNTAX INTEGER { ok(2), short(3), open(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the cable to the ODU." ::= { gnGenStatDeviceEntry 5 } gnGenStatDeviceDryContact OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The status of the dry contacts, Each input status is represented by a bit. When the input is on, the bit value is 0.When the input is off, the bit value is 1. The MSB represents external alarm 8. For example when only external alarm 1 is on the status value will be 0xFE00" ::= { gnGenStatDeviceEntry 6 } gnGenStatDeviceLeds OBJECT-TYPE SYNTAX OCTET STRING(SIZE(3)) ACCESS read-only STATUS mandatory DESCRIPTION "The status of the IDU front panel LEDs. For the management station use. " ::= { gnGenStatDeviceEntry 7 } gnGenStatInternalCommunication OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "The status of internal communication problem bit 1 = 1: between main CPU and ODU CPU. bit 2 = 1: between main CPU and MUX CPU. bit 3 = 1: between master main CPU and slave main CPU." ::= { gnGenStatDeviceEntry 8 } gnGenStatDeviceFanStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "The status of the IDU fans 1-2 or 1-4. bit 1 = IDU Fan1 is faulty. bit 2 = IDU Fan2 is faulty. bit 3 = IDU Fan2 is faulty. bit 4 = IDU Fan2 is faulty." ::= { gnGenStatDeviceEntry 9 } gnGenStatDeviceODUStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "ODU status reported with this parameter. Bit1 is MSB. The bit is set when a fault occurs. The bit is cleared when the fault clears. bit 1 = Power Supply status bit 2 = Synthesizer lock status bit 3 = Tx level status bit 4 = ATPC status bit 5 = Rx level status bit 6 = Not currently used. bit 7 = Temperature status bit 8 = Not currently used. bit 9 = ODU loopback status. bit 10 = Internal use (by application). bit 11 = Tx is in Mute. " ::= { gnGenStatDeviceEntry 10 } gnGenStatDeviceIDUStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "IDU status reported with this parameter. Bit1 is MSB. The bit is set when a fault occurs. The bit is cleared when the fault clears. bit 1 = Power status bit 2 = Cable open status bit 3 = Cable short status bit 4 = Modem Lock status bit 5 = Temperature status bit 6 = No signal from ODU (Phos only) bit 7 = loopback status bit 8 = External alarm 1 status bit 9 = External alarm 2 status bit 10 = External alarm 3 status bit 11 = External alarm 4 status bit 12 = External alarm 5 status bit 13 = External alarm 6 status bit 14 = External alarm 7 status bit 15 = External alarm 8 status bit 16 = Remote connectivity status. bit 17 = Inner communication status. bit 18 = Link ID mismatch status. bit 19 = Configuration mismatch status. bit 20 = Shelf Id mismatch status (Phos only). bit 21 = General HW failure. bit 22 = No power to MUX board. bit 23 = No power to MODEM board. bit 24 = IDC disk firmware cinfiguration mismatch. bit 25 = Modem configuration file. bit 26 = Wayside channel E1/T1 LOS bit 27 = loopback on Wayside channel " ::= { gnGenStatDeviceEntry 11 } gnGenStatDeviceRSTStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The bit is set when a fault occurs. The bit is cleared when the fault clears. bit 1 = Line loss of frame status bit 2 = Radio loss of frame status bit 3 = Line EXC status bit 4 = Radio EXC status bit 5 = Line SD status bit 6 = Radio SD status bit 7 = loss of signal status bit 8 = J0 mismatch. bit 9 = Line UNE status. " ::= { gnGenStatDeviceEntry 12 } gnGenChannelBandwidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The TX channel bandwidth, displayed in 1/100 MHz. For example: An STM-1 ETSI TX channel bandwidth of 56MHz is displayed as the value 5600." ::= { gnGeneral 10 } gnGenTxFreqNumLocalRemote OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the radio transmit frequency, displayed in 1/100 MHz. WRITE changes the local and remote sides. Only for systems that support frequency configuration (Not channel)." ::= { gnGeneral 11} gnGenProtocolType OBJECT-TYPE SYNTAX INTEGER { gnSDH(2), gnSONET(3), gnSONET-C(4), gnSDH-C(5) --SDH-concatenated for plex6200 (stm4) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the radio mapping protocol. -C represents 'concatenated'. " ::= { gnGeneral 12} gnGenLinkId OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "0 for 'old' system that doesn't support the link ID. the user can enter values from 1 to 65535" DEFVAL {0} ::= { gnGeneral 13 } gnGenMibVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The current software version supports this MIB version (and the previous MIB versions)." ::= { gnGeneral 14 } gnGenModemType OBJECT-TYPE SYNTAX INTEGER { gn16QAM(2), gn32QAM(3), gn128QAM(4), gn256QAM(5), gn64QAM(6), gn4QAM(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The system modem type." ::= { gnGeneral 15 } gnGenRadioSide OBJECT-TYPE SYNTAX INTEGER { east(2), west(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL {east} ::= { gnGeneral 16 } gnGenSystemWorkTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The System Work Time (hours)." DEFVAL {0} ::= { gnGeneral 17 } gnGenRxFreqNumLocalRemote OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the radio receive frequency, displayed in 1/100 MHz. WRITE changes the local and remote sides. Only for systems that support frequency configuration (Not channel)." ::= { gnGeneral 18} gnGenLastCfgTimeandDate OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter specifies the last configuration change time and date Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 07 c8 05 1a 0d 1e 0f 00 ( 1992 -5 -26,13:30:15 ) Note that if only local time is known, then timezone information (fields 8-10) is not present." ::= { gnGeneral 19 } gnGenMostSevereAlarm OBJECT-TYPE SYNTAX INTEGER { clear (0), event (1), warning (3), minor (7), major (15), critical (31) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the current moset severe alarm in the system." ::= { gnGeneral 20 } gnGenIdcCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGenIdcCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { gnGeneral 21 } gnGenIdcCfgEntry OBJECT-TYPE SYNTAX GnGenIdcCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { gnGenIdcCfgId } ::= { gnGenIdcCfgTable 1 } GnGenIdcCfgEntry ::= SEQUENCE { gnGenIdcCfgId INTEGER, gnGenIdcCfgXpicMode INTEGER, gnGenIdcCfgResetPerfMon INTEGER, gnGenIdcCfgOperation INTEGER, gnGenIdcCfgWaySideConnector INTEGER, gnGenIdcCfgHeartbeatPeriod INTEGER, gnGenIdcCfgClearLoopTimeout INTEGER, gnGenIdcCfgSlipIp IpAddress, gnGenIdcCfgSlipModemConnection DisplayString, gnGenIdcCfgSlipSpeed INTEGER, gnGenIdcCfgAlarmSeverity OCTET STRING, gnGenIdcCfgIDUSerialNumber DisplayString, gnGenIdcCfgTrapOption INTEGER, gnGenIdcCfgCLLI DisplayString, gnGenIdcCfgEowCascadeStatus INTEGER, gnGenIdcCfgSerialPPPAdminStatus INTEGER } gnGenIdcCfgId OBJECT-TYPE SYNTAX INTEGER { local(1) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnGenIdcCfgEntry 1 } gnGenIdcCfgXpicMode OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " " DEFVAL { disable } ::= { gnGenIdcCfgEntry 2 } gnGenIdcCfgResetPerfMon OBJECT-TYPE SYNTAX INTEGER { reset(2), noAction(3), clearFastEthernetStatistics(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Reset performance monitoring. " DEFVAL { noAction } ::= { gnGenIdcCfgEntry 3 } gnGenIdcCfgOperation OBJECT-TYPE SYNTAX INTEGER { noOperation(2), softwareReset(3), setDefaultConf(4), setIDCDefaultConf(5), hardwareColdReset(6), hardwareSoftReset(7) } ACCESS read-write STATUS mandatory DESCRIPTION "." DEFVAL { noOperation } ::= { gnGenIdcCfgEntry 4 } gnGenIdcCfgWaySideConnector OBJECT-TYPE SYNTAX INTEGER { noInterface(1), -- No interface connectorE1(2), connectorT1(3), connectorDualE1(4), connectorDualT1(5), connectorDual10baseT(6) -- Ethernet Bridge } ACCESS read-only STATUS mandatory DESCRIPTION "This is the physical interface of the radio E1 way side channel (WAYSIDE CHANNEL connection)." DEFVAL { noInterface } ::= { gnGenIdcCfgEntry 5 } gnGenIdcCfgHeartbeatPeriod OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION " This item defines the number of minutes between each trap" DEFVAL { 0 } ::= { gnGenIdcCfgEntry 6 } gnGenIdcCfgClearLoopTimeout OBJECT-TYPE SYNTAX INTEGER (0..1440) ACCESS read-write STATUS mandatory DESCRIPTION " This item defines the clear loopbacks timeout in minutes. possible values: 0..1440. 0 means disable. " DEFVAL { 0 } ::= { gnGenIdcCfgEntry 7 } gnGenIdcCfgSlipIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This is the SERIAL interface IP address." ::= { gnGenIdcCfgEntry 8 } gnGenIdcCfgSlipModemConnection OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The telephone number to which the modem will initialize a call, upon generation of a TRAP. The number must be entered numerically (for example 18001234567)." ::= { gnGenIdcCfgEntry 9 } gnGenIdcCfgSlipSpeed OBJECT-TYPE SYNTAX INTEGER { baud9600(1), baud19200(2), baud38400(3), baud57600(4), baud115200(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The SERIAL interface baud rate." ::= { gnGenIdcCfgEntry 10 } gnGenIdcCfgAlarmSeverity OBJECT-TYPE SYNTAX OCTET STRING(SIZE(15)) ACCESS read-write STATUS mandatory DESCRIPTION "This field is used only by the element management application." ::= { gnGenIdcCfgEntry 11 } gnGenIdcCfgIDUSerialNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the IDU serial number - up to 20 characters " ::= { gnGenIdcCfgEntry 12} gnGenIdcCfgTrapOption OBJECT-TYPE SYNTAX INTEGER (0..31) ACCESS read-write STATUS mandatory DESCRIPTION " This item defines various trap options (0-15): 0 - SNSN (STANDARD TRAPS DO NOT INCLUDE SERIAL NUMBER) 1 - ASN (ALL TRAPS INCLUDE SERIAL NUMBER) 2 - SNSN, DNLR (DO NOT REPORT LOCAL TRAPS FROM REMOTE IDU) 3 - ASN, DNLR 4 - SNSN, EVT (EVENTS ARE REPORTED AS TRAPS) 5 - ASN, EVT 6 - SNSN, DNLR, EVT 7 - ASN, DNLR, EVT * - Add 8 to your choice for excluding traps with id >= 128. Example: for SNSN, DNLR with this filter write 10 (=8+2). ** - Add another 16 to your choice in order to send 'clear' traps with zero severity." DEFVAL { 0 } ::= { gnGenIdcCfgEntry 13 } gnGenIdcCfgCLLI OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION " Common Language Location Identifier (maximum length: 30)" ::= { gnGenIdcCfgEntry 14 } gnGenIdcCfgEowCascadeStatus OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Not used!!." DEFVAL { disable } ::= { gnGenIdcCfgEntry 15 } gnGenIdcCfgSerialPPPAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable\Disable PPP over serial interface." DEFVAL { enable } ::= { gnGenIdcCfgEntry 16 } -- Deleted two parameters (15 and 16) Eitan 16.11. -- Add tftp server suppot (15) Haim gnGenIdcStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGenIdcStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { gnGeneral 22 } gnGenIdcStatEntry OBJECT-TYPE SYNTAX GnGenIdcStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { gnGenIdcStatId } ::= { gnGenIdcStatTable 1 } GnGenIdcStatEntry ::= SEQUENCE { gnGenIdcStatId INTEGER, gnGenIdcStatXpicSupport INTEGER, gnGenIdcStatLeds OCTET STRING, gnGenIdcStatIDUStatus OCTET STRING, gnGenIdcStatMMCCardStatus OCTET STRING, gnGenIdcStatDryContact OCTET STRING, gnGenIdcStatFanStatus OCTET STRING, gnGenIdcStatLeftDrawerStatus INTEGER, gnGenIdcStatRightDrawerStatus INTEGER, gnGenIdcStatHitlessSupport INTEGER, gnGenIdcStatEowExistence INTEGER, gnGenIdcStatEowSupport INTEGER, gnGenIdcStatIduPosition INTEGER, gnGenIdcStatBoardType INTEGER, gnGenIdcStatAgentIPAddress IpAddress, gnGenIdcStatInterfaceConnector INTEGER, gnGenIdcStatIfTableCounter INTEGER } gnGenIdcStatId OBJECT-TYPE SYNTAX INTEGER { local(1) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnGenIdcStatEntry 1 } gnGenIdcStatXpicSupport OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnGenIdcStatEntry 2 } gnGenIdcStatLeds OBJECT-TYPE SYNTAX OCTET STRING(SIZE(3)) ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnGenIdcStatEntry 3 } gnGenIdcStatIDUStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-only STATUS mandatory DESCRIPTION "IDU status reported with this parameter. Bit1 is MSB. The bit is set when a fault occurs. The bit is cleared when the fault clears. bit 1 = Fans status bit 2 = configuration mismatch bit 3 = Internal use bit 4 = Internal use bit 5 = XPIC cable swap bit 6 = External alarm 1 status bit 7 = External alarm 2 status bit 8 = External alarm 3 status bit 9 = External alarm 4 status bit 10 = External alarm 5 status bit 12 = External alarm 6 status bit 13 = External alarm 7 status bit 14 = External alarm 8 status bit 15 = Auxiliary interface card is down " ::= { gnGenIdcStatEntry 4 } gnGenIdcStatMMCCardStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "Bit1 is MSB. bit 1 = 0=MMC card exist, 1=MMC card not exist bit 2 = MMC card status: 0=ok, 1=fault " ::= { gnGenIdcStatEntry 5 } gnGenIdcStatDryContact OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The status of the dry contacts, Each input status is represented by a bit." ::= { gnGenIdcStatEntry 6 } gnGenIdcStatFanStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "The status of the IDU fans 1-2 or 1-4. bit 1 = IDU Fan1 is faulty. bit 2 = IDU Fan2 is faulty. bit 3 = IDU Fan2 is faulty. bit 4 = IDU Fan2 is faulty." ::= { gnGenIdcStatEntry 7 } gnGenIdcStatLeftDrawerStatus OBJECT-TYPE SYNTAX INTEGER { noDrawer(2), drawerDown(3), drawerUp(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnGenIdcStatEntry 8 } gnGenIdcStatRightDrawerStatus OBJECT-TYPE SYNTAX INTEGER { noDrawer(2), drawerDown(3), drawerUp(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnGenIdcStatEntry 9 } gnGenIdcStatHitlessSupport OBJECT-TYPE SYNTAX INTEGER { supported(2), notSupported(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication for hitless support." ::= { gnGenIdcStatEntry 10 } gnGenIdcStatEowExistence OBJECT-TYPE SYNTAX INTEGER { exist(2), notExist(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter sight physical existence of the EOW connector." ::= { gnGenIdcStatEntry 11 } gnGenIdcStatEowSupport OBJECT-TYPE SYNTAX INTEGER { supported(2), notSupported(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication for EOW (cascade) support." ::= { gnGenIdcStatEntry 12 } gnGenIdcStatIduPosition OBJECT-TYPE SYNTAX INTEGER { upper(2), lower(3), single(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication for idu position." ::= { gnGenIdcStatEntry 13 } gnGenIdcStatBoardType OBJECT-TYPE SYNTAX INTEGER { v1(2), v2(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication for the board type." ::= { gnGenIdcStatEntry 14 } gnGenIdcStatAgentIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Indication for the Agent IP address." ::= { gnGenIdcStatEntry 15 } gnGenIdcStatInterfaceConnector OBJECT-TYPE SYNTAX INTEGER { notExist(2), oneFEplus64E1(3), twoFEplus64E1(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication for the interface connector type." ::= { gnGenIdcStatEntry 16 } gnGenIdcStatIfTableCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This counter is initialize to a random number and increment on every change of the IfTable (This is for NMS use)." ::= { gnGenIdcStatEntry 17 } gnGeneralXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGeneralXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { gnGeneral 23 } gnGeneralXEntry OBJECT-TYPE SYNTAX GnGeneralXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { gnGenXId } ::= { gnGeneralXTable 1 } GnGeneralXEntry ::= SEQUENCE { gnGenXId INTEGER, gnGenXStandardOrg INTEGER, gnGenXRemoteConnection INTEGER, gnGenXLinkId INTEGER, gnGenXModemType INTEGER, gnGenXRadioSide INTEGER, gnGenXSystemWorkTime INTEGER, gnGenXOperation INTEGER, gnGenXResetPerfMon INTEGER, gnGenXAlarmSeverity OCTET STRING, gnGenXCarrierSerialNumber DisplayString, gnGenXMUXSerialNumber DisplayString, gnGenXProductType INTEGER, gnGenXCarrierConnector INTEGER, gnGenXInterfacesLeds OCTET STRING, gnGenXMultiRateMultiConsConf INTEGER, gnGenXMultiRateMultiConsSupport OCTET STRING, gnGenXWaysideChannel INTEGER, gnGenXWaySideLoopback INTEGER, gnGenXSyncIdcDataBase INTEGER, gnGenXAesEnable INTEGER, gnGenXAesMkeyMode INTEGER, gnGenXActNumOfInterfaceOnClass1 INTEGER, gnGenXActNumOfInterfaceOnClass2 INTEGER, gnGenXActNumOfInterfaceOnClass3 INTEGER, gnGenXEowStatus INTEGER, gnGenXTempLicenseEnable INTEGER, gnGenXTempLicenseTimer INTEGER, gnGenXDefectBlocks INTEGER, gnGenXBytesCorrected INTEGER, gnGenXPrbsTest INTEGER, gnGenXClearCounters INTEGER, gnGenXMuxLicense OCTET STRING } gnGenXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnGeneralXEntry 1 } gnGenXStandardOrg OBJECT-TYPE SYNTAX INTEGER { etsi(2), fcc(3), japan(4), lmds(5), cmds(6), australia(7), other(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies which international standard is used." ::= { gnGeneralXEntry 2 } gnGenXRemoteConnection OBJECT-TYPE SYNTAX INTEGER { connected(2), disconnected(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the connection between the local manager and the remote manager." ::= { gnGeneralXEntry 3 } gnGenXLinkId OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "0 for 'old' system that doesn't support the link ID. the user can enter values from 1 to 65535" DEFVAL {0} ::= { gnGeneralXEntry 4 } gnGenXModemType OBJECT-TYPE SYNTAX INTEGER { gn16QAM(2), gn32QAM(3), gn128QAM(4), gn256QAM(5), gn64QAM(6), gn4QAM(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The system modem type." ::= { gnGeneralXEntry 5 } gnGenXRadioSide OBJECT-TYPE SYNTAX INTEGER { east(2), west(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL {east} ::= { gnGeneralXEntry 6 } gnGenXSystemWorkTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The System Work Time (hours)." DEFVAL {0} ::= { gnGeneralXEntry 7 } gnGenXOperation OBJECT-TYPE SYNTAX INTEGER { noOperation(2), setMuxDefaultConf(3), hardwareColdReset(4), hardwareWarmReset(5), softwareODCReset(6), hardwareODCReset(7), resetAllDrawers(8) } ACCESS read-write STATUS mandatory DESCRIPTION "." DEFVAL { noOperation } ::= { gnGeneralXEntry 8 } gnGenXResetPerfMon OBJECT-TYPE SYNTAX INTEGER { reset(2), noAction(3), clearFastEthernetStatistics(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Reset performance monitoring. " DEFVAL { noAction } ::= { gnGeneralXEntry 9 } gnGenXAlarmSeverity OBJECT-TYPE SYNTAX OCTET STRING(SIZE(15)) ACCESS read-write STATUS mandatory DESCRIPTION "This field is used only by the element management application Every Trap severity 4 bits. 15 (MAJOR), 7 (MINOR), 3 (WARNING) and 1 (EVENT) options. The first 4 bits ODU Power supply severity, then the Synthesizer severity ,then Tx level then RX level ODU temperature, ODU loopback , IDU power supply , Cable, Modem, IDU temperature, IDU loopbacks, External Alarm 1, External Alarm 2 ,External Alarm 3, External Alarm 4, External Alarm 5, External Alarm 6, External Alarm 7, External Alarm 8, Remote connectivity, LOF, LOS, EXC, SD J0 mismatch and system fault." ::= { gnGeneralXEntry 10 } gnGenXCarrierSerialNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the carrier serial number - up to 20 characters " ::= { gnGeneralXEntry 11 } gnGenXMUXSerialNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the MUX serial number - up to 20 characters " ::= { gnGeneralXEntry 12 } gnGenXProductType OBJECT-TYPE SYNTAX INTEGER { accessMux (2), sdhRegenerator (3), narrowBandPdhRepeater (4), accessMuxStm0 (5), plex6200 (6), adm (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The product type." ::= { gnGeneralXEntry 13 } gnGenXCarrierConnector OBJECT-TYPE SYNTAX INTEGER { noInterface(2), oneElectricalSTM1(3), oneFiberSTM1SingleMode(4), oneFiberSTM1MultiMode(5), twoElectricalSTM1(6), twoFiberSTM1SingleMode(7), twoFiberSTM1MultiMode(8), oneFEOnly(9), oneFEplus4E1(10), oneFEplus8E1(11), oneFEplus4T1(12), oneFEplus8T1(13), twoFEOnly(14), twoFEplus4E1(15), twoFEplus8E1(16), twoFEplus4T1(17), twoFEplus8T1(18), oneDS3(19), threeDS3(20), oneE3(21), threeE3(22), oneOpticalGBEOnly(23), oneOpticalGBEPlus8E1(24), oneOpticalGBEPlus8T1(25), oneElectricalGBEOnly(26), oneElectricalGBEPlus8E1(27), oneElectricalGBEPlus8T1(28), oneFEplus64E1(29), oneFEplus64T1(30), eightE1Only(31), eightT1Only(32), oneStm1XC(33), twoStm1XC(34) } ACCESS read-only STATUS mandatory DESCRIPTION "For ACCESS hardware, this indicates the first (left) interface connector." ::= { gnGeneralXEntry 14 } gnGenXInterfacesLeds OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "The status of the Interface LEDs. For the management station use. Each two bits represents one led as follows: 00 - Gray, 01 - Green, 10 - Orange, 11 - Red. The led order: Led1 is msb 2 bits , after it led2, till led 16 - 2 lsb bits." ::= { gnGeneralXEntry 15 } gnGenXMultiRateMultiConsConf OBJECT-TYPE SYNTAX INTEGER { mrmc1528(1), mrmc1550(2), mrmc3156(3), mrmc3150(4), mrmc1228(5), mrmc1540(6), mrmc4410(7), mrmc4420(8), mrmc4440(9), mrmc1125(10), mrmc2050(11), mrmc2030(12), mrmc1340(13), mrmc3756(18), acm56(24), acm50(25), acm28(26) } ACCESS read-write STATUS mandatory DESCRIPTION "The Link data capacity" ::= { gnGeneralXEntry 16 } gnGenXMultiRateMultiConsSupport OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { gnGeneralXEntry 17 } gnGenXWaysideChannel OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable Disable drawer wayside channel " DEFVAL { disable } ::= { gnGeneralXEntry 18 } gnGenXWaySideLoopback OBJECT-TYPE SYNTAX INTEGER { noloopback(2), waySideLoop(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter controls the WAYSIDE channel loopback diagnostic operations." DEFVAL { noloopback } ::= { gnGeneralXEntry 19 } gnGenXSyncIdcDataBase OBJECT-TYPE SYNTAX INTEGER { noOperation(2), idcToDrawer(3), drawerToIdc(4) } ACCESS read-write STATUS mandatory DESCRIPTION "." DEFVAL { noOperation } ::= { gnGeneralXEntry 20 } gnGenXAesEnable OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3), notSupport(4), systemFailure(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter defines encryption admin mode." DEFVAL { disable } ::= { gnGeneralXEntry 21 } gnGenXAesMkeyMode OBJECT-TYPE SYNTAX INTEGER { auto(2), manual(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter is not used." DEFVAL { auto } ::= { gnGeneralXEntry 22 } gnGenXActNumOfInterfaceOnClass1 OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the actual number of interfaces on class 1." DEFVAL { 0 } ::= { gnGeneralXEntry 23 } gnGenXActNumOfInterfaceOnClass2 OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the actual number of interfaces on class 2." DEFVAL { 0 } ::= { gnGeneralXEntry 24 } gnGenXActNumOfInterfaceOnClass3 OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the actual number of interfaces on class 3." DEFVAL { 0 } ::= { gnGeneralXEntry 25 } gnGenXEowStatus OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Not used." DEFVAL { disable } ::= { gnGeneralXEntry 26 } gnGenXTempLicenseEnable OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3), notSupported(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Set temporary license enable or disable." DEFVAL { disable } ::= { gnGeneralXEntry 27 } gnGenXTempLicenseTimer OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the temporary license timer." DEFVAL { 0 } ::= { gnGeneralXEntry 28 } gnGenXDefectBlocks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of defected blocks that could not be corrected by the FEC " ::= { gnGeneralXEntry 29 } gnGenXBytesCorrected OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of bytes corrected by the FEC" ::= { gnGeneralXEntry 30 } gnGenXPrbsTest OBJECT-TYPE SYNTAX INTEGER { notActive(2), active(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter enable the user to activate the PRBS test." DEFVAL { notActive } ::= { gnGeneralXEntry 31 } gnGenXClearCounters OBJECT-TYPE SYNTAX INTEGER { noAction(2), clearCounters(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter enable the user to clear the PRBS counters." DEFVAL { noAction } ::= { gnGeneralXEntry 32 } gnGenXMuxLicense OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION " Inidcation for license features. Bit #0-#4 - Ethernet througput limit." ::= { gnGeneralXEntry 33 } gnGenAddAlarmExtToTraps OBJECT-TYPE SYNTAX INTEGER { no (2), yes (3) } ACCESS read-write STATUS mandatory DESCRIPTION "If chose 'yes', the Alarm Id, Origin and Unit from gnAgnCurrentAlarmTable will be bind to the end of each private trap." DEFVAL { no } ::= { gnGeneral 24 } gnGenFeatureSupport OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "Inidcation for feature support. msb is for bit #1. The bit is set when a specific feature is support. Bit #1 - Tftp server support. Bit #2 - Cold reset support. Bit #3 - Severity critical for external alarm. Bit #4 - MRMC filter table. Bit #5 - NeighborIP Support Fast and DS3. Bit #6 - Auxiliary channel drawer routing support. Bit #7 - Single drawer external protection support. Bit #8 - dual drawer external protection not support. Bit #9 - Left Drawer XPIC hardware support (0 - support, 1 - not support). Bit #10 - Right Drawer XPIC hardware support (0 - support, 1 - not support). Bit #11 - Internal Protection Not Supported (0 - support, 1 - not support). Bit #12 - One Ws Channel Only (0 - FALSE, 1 - TRUE). Bit #13 - Protect option not support (0 - support, 1 - not support). Bit #14 - UC ethernet support (0 - not support, 1 - support). Bit #15 - WSC only disable (0 - enable & disable, 1 - only disable). Bit #16 - UC only disable (0 - enable & disable, 1 - only disable). Bit #17 - EOW only disable (0 - enable & disable, 1 - only disable). Bit #18 - Left Drawer modem latency Not support (0 - support, 1 - not support). Bit #19 - Right Drawer modem latency Not support (0 - support, 1 - not support). Bit #20 - Clear PM for drawer (0 - support, 1 - not support). Bit #21 - Allow Sync mode in UC#2 (0 - not allow, 1 - allow). Bit #22 - External Alarm Switch not support (0 - support, 1 - not support). Bit #23 - Is Hitless config [Divesity Type,Revertive Mode and Revertive Time] are disable (0 - enable, 1 - disable). Bit #24 - QoS left carrier support (1 - support, 0 - not support). Bit #25 - QoS right carrier support (1 - support, 0 - not support). Bit #26 - ACM left carrier support (1 - support, 0 - not support). Bit #27 - ACM right carrier support (1 - support, 0 - not support). Bit #28 - ACM adaptive left carrier support (1 - support, 0 - not support). Bit #29 - ACM adaptive right carrier support (1 - support, 0 - not support). Bit #30 - Single left board reset not support (0 - support, 1 - not support). Bit #31 - Single right board reset not support (0 - support, 1 - not support). Bit #32 - Left drawer reset not support (0 - support,1 - not support). Bit #33 - Right drawer reset not support (0 - support,1 - not support). Bit #34 - All drawers reset support (0 - not support,1 - support). Bit #35 - License manager not support (0 - support,1 - not support). Bit #36 - Multi radio protection support (1 - support,0 - not support). Bit #37 - Copy IDC to left drawer not support (0 - support,1 - not support). Bit #38 - Copy IDC to right drawer not support (0 - support,1 - not support). Bit #39 - Copy IDC to all drawers support (0 - not support,1 - support). Bit #40 - Gigabit flow control support on left carrier(1 - support,0 - not support). Bit #41 - Gigabit flow control support on right carrier(1 - support,0 - not support). Bit #42 - Gigabit PM and statistics support on left carrier(1 - support,0 - not support). Bit #42 - Gigabit PM and statistics support on right carrier(1 - support,0 - not support)." ::= { gnGeneral 25 } gnGeneralMrmcXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGeneralMrmcXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= {gnGeneral 26} gnGeneralMrmcXEntry OBJECT-TYPE SYNTAX GnGeneralMrmcXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the supported modem configuration script for each drawer." INDEX { gnGenMrmcXId, gnGenMrmcXMrmcVal} ::= { gnGeneralMrmcXTable 1 } GnGeneralMrmcXEntry ::= SEQUENCE { gnGenMrmcXId INTEGER, gnGenMrmcXMrmcVal INTEGER, gnGenMrmcXBitRate INTEGER, gnGenMrmcXBandWidth INTEGER, gnGenMrmcXQam INTEGER, gnGenMrmcXScriptType INTEGER } gnGenMrmcXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Drawer number." ::= { gnGeneralMrmcXEntry 1 } gnGenMrmcXMrmcVal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies MRMC value." ::= { gnGeneralMrmcXEntry 2 } gnGenMrmcXBitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies transfer bit rate." ::= { gnGeneralMrmcXEntry 3 } gnGenMrmcXBandWidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies channel band width." ::= { gnGeneralMrmcXEntry 4 } gnGenMrmcXQam OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies modem qam." ::= { gnGeneralMrmcXEntry 5 } gnGenMrmcXScriptType OBJECT-TYPE SYNTAX INTEGER { v1(2), v2(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the type of the script. v1 - Regular MRMC script. v2 - ACM MRMC script." ::= { gnGeneralMrmcXEntry 6 } gnGenDrawerXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGenDrawerXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates drawer x." ::= { gnGeneral 27 } gnGenDrawerXEntry OBJECT-TYPE SYNTAX GnGenDrawerXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing drawer x namd and id." INDEX { gnGenDrawerXId} ::= { gnGenDrawerXTable 1 } GnGenDrawerXEntry ::= SEQUENCE { gnGenDrawerXId INTEGER, gnGenDrawerXName DisplayString (SIZE(0..20)), gnGenDrawerXSlot1Status INTEGER, gnGenDrawerXSlot2Status INTEGER, gnGenDrawerXDeviceLeds OCTET STRING, gnGenDrawerXInternalCommunication OCTET STRING, gnGenDrawerXDeviceIDUStatus OCTET STRING } gnGenDrawerXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the drawer's id" ::= { gnGenDrawerXEntry 1 } gnGenDrawerXName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the drawer's name" ::= { gnGenDrawerXEntry 2 } gnGenDrawerXSlot1Status OBJECT-TYPE SYNTAX INTEGER { notExist(2), powerOff(3), powerOn(4), dbReady(5) } ACCESS read-only STATUS mandatory DESCRIPTION "notExist - board not exist. powerOff - board inserted and power off. powerOn - board inserted and power on. dbReady - board is power on and DB ready." DEFVAL { notExist } ::= { gnGenDrawerXEntry 3 } gnGenDrawerXSlot2Status OBJECT-TYPE SYNTAX INTEGER { notExist(2), powerOff(3), powerOn(4), dbReady(5) } ACCESS read-only STATUS mandatory DESCRIPTION "notExist - board not exist. powerOff - board inserted and power off. powerOn - board inserted and power on. dbReady - board is power on and DB ready." DEFVAL { notExist } ::= { gnGenDrawerXEntry 4 } gnGenDrawerXDeviceLeds OBJECT-TYPE SYNTAX OCTET STRING(SIZE(3)) ACCESS read-only STATUS mandatory DESCRIPTION "The status of the IDU front panel LEDs. For the management station use. " ::= { gnGenDrawerXEntry 5 } gnGenDrawerXInternalCommunication OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "The status of internal communication problem bit 1 = 1: between main CPU and ODU CPU. bit 2 = 1: between main CPU and MUX CPU. bit 3 = 1: between master main CPU and slave main CPU." ::= { gnGenDrawerXEntry 6 } gnGenDrawerXDeviceIDUStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "IDU status reported with this parameter. Bit1 is MSB. The bit is set when a fault occurs. The bit is cleared when the fault clears. bit 1 = Power status bit 2 = Cable open status bit 3 = Cable short status bit 4 = Modem Lock status bit 5 = Temperature status bit 6 = No signal from ODU (Phos only) bit 7 = loopback status bit 8 = External alarm 1 status bit 9 = External alarm 2 status bit 10 = External alarm 3 status bit 11 = External alarm 4 status bit 12 = External alarm 5 status bit 13 = External alarm 6 status bit 14 = External alarm 7 status bit 15 = External alarm 8 status bit 16 = Remote connectivity status. bit 17 = Inner communication status. bit 18 = Link ID mismatch status. bit 19 = Configuration mismatch status. bit 20 = Shelf Id mismatch status (Phos only). bit 21 = General HW failure. bit 22 = No power to MUX board. bit 23 = No power to MODEM board. bit 24 = IDC disk firmware cinfiguration mismatch. bit 25 = Modem configuration file. bit 26 = Wayside channel E1/T1 LOS bit 27 = loopback on Wayside channel " ::= { gnGenDrawerXEntry 7 } gnCluster OBJECT IDENTIFIER ::= { gnGeneral 28 } cluster OBJECT IDENTIFIER ::= { gnCluster 1} clusterSystemType OBJECT-TYPE SYNTAX INTEGER { unknown(2), p1500(3), t3200(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the system type: Phophorus, Avalon or Unknown Backplane" ::= { cluster 1 } clusterNumOfSubRacks OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the number of subrack, 1st phase supporsts only 1" ::= { cluster 3 } clusterSubRackNum OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the subrack's number" ::= { cluster 4 } clusterFloorNum OBJECT-TYPE SYNTAX INTEGER (0..9) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the subrack's number" ::= { cluster 5 } clusterIPBase OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the Cluster IP base " ::= { cluster 6 } clusterIDCRole OBJECT-TYPE SYNTAX INTEGER { clusterPrime(2), member(3), subrackManager(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates - ClusterPrime - 2nd floor of 1st rack, SubRackManager - 2nd floor of other racks." ::= { cluster 7 } clusterPrimeIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This value enable CV/PV to know the server IP even if it is not connected" ::= { cluster 8 } clusterPeerIPLastChangeTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates The last time when the Peer IP Table changed" ::= { cluster 9 } addressesTable OBJECT-TYPE SYNTAX SEQUENCE OF AddressesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the cluster's IP Addresses." ::= { gnCluster 2 } addressesEntry OBJECT-TYPE SYNTAX AddressesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the cluster's IP Addresses." INDEX { addressesPeerIPId} ::= { addressesTable 1 } AddressesEntry ::= SEQUENCE { addressesPeerIPId INTEGER, addressesPeerIPAddress IpAddress } addressesPeerIPId OBJECT-TYPE SYNTAX INTEGER (1..9) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the peer IP id" ::= { addressesEntry 1 } addressesPeerIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the IP address of a Server/Client. " ::= { addressesEntry 2 } primeIDC OBJECT IDENTIFIER ::= { gnCluster 3} primeIDCAutoInternalClockDistribution OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates whether the internal clock distribution is enabled or disabled. " ::= { primeIDC 1 } primeIDCSynchronizeClockInCluster OBJECT-TYPE SYNTAX INTEGER { noaction(2), synchronize(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates whether to synchronize the clock in the cluster. " ::= { primeIDC 2 } backplaneSlotMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF BackplaneSlotMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the cluster's IP Addresses." ::= { gnCluster 4 } backplaneSlotMappingEntry OBJECT-TYPE SYNTAX BackplaneSlotMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the cluster's IP Addresses." INDEX { backplaneSlotMappingSubrackId, backplaneSlotMappingFloorId, backplaneSlotMappingDrawerId, backplaneSlotMappingSubDrawerId} ::= { backplaneSlotMappingTable 1 } BackplaneSlotMappingEntry ::= SEQUENCE { backplaneSlotMappingSubrackId INTEGER (1..3), backplaneSlotMappingFloorId INTEGER (1..100), backplaneSlotMappingDrawerId INTEGER (1..3), backplaneSlotMappingSubDrawerId INTEGER (1..2), backplaneSlotMappingUnitType INTEGER, backplaneSlotMappingUnitNumber INTEGER (1..15), backplaneSlotMappingUnitIndex INTEGER } backplaneSlotMappingSubrackId OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the subrack index. " ::= { backplaneSlotMappingEntry 1 } backplaneSlotMappingFloorId OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the floor id The 4U floor index (upper) will be 99. " ::= { backplaneSlotMappingEntry 2 } backplaneSlotMappingDrawerId OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-only STATUS mandatory DESCRIPTION "For floors 1-3: IDC=1, Drawer 1=2, Drwaer2 =3. For 4U floor (floor #99), Aux=1, Power=2. " ::= { backplaneSlotMappingEntry 3 } backplaneSlotMappingSubDrawerId OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the sub drawer id IDC, Drawer 1 & 2 will be only 1. XC main (up) will be 1 and XC backup (lower) will be 2. " ::= { backplaneSlotMappingEntry 4 } backplaneSlotMappingUnitType OBJECT-TYPE SYNTAX INTEGER { idc(2), odu(3), mux(4), modem(5), drawer(6), unknown(7), none(8), xc(9), auxInterface(10), power(11) } ACCESS read-only STATUS mandatory DESCRIPTION "The values are the same as in gnAgnCurrentAlarm Unit. " ::= { backplaneSlotMappingEntry 5 } backplaneSlotMappingUnitNumber OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the unit number. " ::= { backplaneSlotMappingEntry 6 } backplaneSlotMappingUnitIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the unit number. " ::= { backplaneSlotMappingEntry 7 } gnSubrack OBJECT IDENTIFIER ::= { gnGeneral 29 } powerInputTable OBJECT-TYPE SYNTAX SEQUENCE OF PowerInputEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the Power Input." ::= { gnSubrack 1 } powerInputEntry OBJECT-TYPE SYNTAX PowerInputEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the Power Input." INDEX { powerInputId} ::= { powerInputTable 1 } PowerInputEntry ::= SEQUENCE { powerInputId INTEGER (1..6), powerInputAdmin INTEGER, powerInputStatus INTEGER, powerInputLedStatus OCTET STRING (SIZE(1)) } powerInputId OBJECT-TYPE SYNTAX INTEGER (1..6) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the power input Id. " ::= { powerInputEntry 1 } powerInputAdmin OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates whether the power input Admin is enables or disabled. " ::= { powerInputEntry 2 } powerInputStatus OBJECT-TYPE SYNTAX INTEGER { notexist(2), unknown(3), down(4), up(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates whether the power input is up or down, Notexist when power input card not exist. unknown when no A-Aux." ::= { powerInputEntry 3 } powerInputLedStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This value, Led1 is MSB 2 bits. Each two bits represents one led:00 - Gray,01 - Blue. " ::= { powerInputEntry 4 } auxiliaryDrawer OBJECT IDENTIFIER ::= { gnSubrack 2 } auxiliaryDrawerAuxCardType OBJECT-TYPE SYNTAX INTEGER { na(2), v1(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates whether the Auxiliary Card type." ::= { auxiliaryDrawer 1 } auxiliaryDrawerLedsStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "This value, Led16 is MSB 2 bits, Led1 is LSB 2 bits. Each two bits represents one led:00 - Gray,01 - Green, 10 - Orange, 11 - Red. Led 1: Status of WSC/UC Ethernet (upper connector, left side). Led 2: Status of WSC/UC Ethernet (upper connector, right side). Led 3: Status of WSC/UC Ethernet (lower connector, left side). Led 4: Status of WSC/UC Ethernet (lower connector, right side). Led 5: Reserved - Status of managment link (upper connector). Led 6: Reserved - Status of managment activity (upper connector). Led 7: Reserved - Status of managment link (lower connector). Led 8: Reserved - Status of managment activity (lower connector). Led 9: Status of WSC E1/T1 (upper connector, left side). Led 10: Status of WSC E1/T1 (upper connector, right side). Led 11: Status of WSC E1/T1 (lower connector, left side). Led 12: Status of WSC E1/T1 (lower connector, right side). Led 13: Status of EOW Cascading (upper connector, left side). Led 14: Status of EOW Cascading (upper connector, right side). Led 15: Reserved - Status of external fans (lower connector, left side). Led 16: Reserved - Status of external fans (lower connector, right side)." ::= { auxiliaryDrawer 2 } auxiliaryDrawerBoardHWVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the EEPROM value." ::= { auxiliaryDrawer 3 } auxiliaryDrawerBoardFWVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the Register value ." ::= { auxiliaryDrawer 4 } auxiliaryDrawerBoardPostResetFWVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the Register value ." ::= { auxiliaryDrawer 5 } auxiliaryDrawerSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the EEPROM value." ::= { auxiliaryDrawer 6 } auxiliaryDrawerBoardReset OBJECT-TYPE SYNTAX INTEGER { noaction(2), reset(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates whether to reset board." ::= { auxiliaryDrawer 7 } auxiliaryDrawerOrderWireCascading OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates whether the Order Wire Cascading is enables or disabled. " ::= { auxiliaryDrawer 8 } xcDrawerTable OBJECT-TYPE SYNTAX SEQUENCE OF XCDrawerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the XC Drawer." ::= { gnSubrack 3 } xcDrawerEntry OBJECT-TYPE SYNTAX XCDrawerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the XC Drawer." INDEX { xcDrawerXCId} ::= { xcDrawerTable 1 } XCDrawerEntry ::= SEQUENCE { xcDrawerXCId INTEGER (1..6), xcDrawerLedsStatus OCTET STRING (SIZE(1)), xcDrawerBoardHWVersion INTEGER, xcDrawerBoardFWVersion DisplayString (SIZE(0..20)), xcDrawerBoardPostResetFWVersion DisplayString (SIZE(0..20)), xcDrawerSerialNumber DisplayString (SIZE(0..20)), xcDrawerResetXCBoard INTEGER, xcDrawerXCSelfTestResult INTEGER, xcDrawerXCActivityRole INTEGER, xcDrawerSyncIdcDataBase INTEGER, xcDrawerXCConnector INTEGER } xcDrawerXCId OBJECT-TYPE SYNTAX INTEGER (1..6) ACCESS read-only STATUS mandatory DESCRIPTION "This value, 1-2 for 1st rack, 3-4 for 2nd, 5-6 for 3rdy. " ::= { xcDrawerEntry 1 } xcDrawerLedsStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This value, Led1 is MSB 2 bits, Led4 is LSB . Each two bits represents one led:00 - Gray,01 - Green, 10 - Orange, 11 - Red. " ::= { xcDrawerEntry 2 } xcDrawerBoardHWVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the EEPROM value." ::= { xcDrawerEntry 3 } xcDrawerBoardFWVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the Register value ." ::= { xcDrawerEntry 4 } xcDrawerBoardPostResetFWVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the Register value ." ::= { xcDrawerEntry 5 } xcDrawerSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the EEPROM value." ::= { xcDrawerEntry 6 } xcDrawerResetXCBoard OBJECT-TYPE SYNTAX INTEGER { noaction(2), reset(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates whether to reset XC." ::= { xcDrawerEntry 7 } xcDrawerXCSelfTestResult OBJECT-TYPE SYNTAX INTEGER { passed(2), failed(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the XC self test result." ::= { xcDrawerEntry 8 } xcDrawerXCActivityRole OBJECT-TYPE SYNTAX INTEGER { active(2), standby(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the XC activity role." ::= { xcDrawerEntry 9 } xcDrawerSyncIdcDataBase OBJECT-TYPE SYNTAX INTEGER { noOperation(2), idcToXC(3), xcToIdc(4) } ACCESS read-write STATUS mandatory DESCRIPTION "." DEFVAL { noOperation } ::= { xcDrawerEntry 10 } xcDrawerXCConnector OBJECT-TYPE SYNTAX INTEGER { oneStm1XC(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the XC activity role." ::= { xcDrawerEntry 11 } gnGenCarrierXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGenCarrierXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates carrier x." ::= { gnGeneral 30 } gnGenCarrierXEntry OBJECT-TYPE SYNTAX GnGenCarrierXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry of carrier x." INDEX { gnGenCarrierXId} ::= { gnGenCarrierXTable 1 } GnGenCarrierXEntry ::= SEQUENCE { gnGenCarrierXId INTEGER, gnGenCarrierXResetPerfMon INTEGER, gnGenCarrierXSyncIdcDataBase INTEGER } gnGenCarrierXId OBJECT-TYPE SYNTAX INTEGER { carrier1(3), carrier2(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the carrier id" ::= { gnGenCarrierXEntry 1 } gnGenCarrierXResetPerfMon OBJECT-TYPE SYNTAX INTEGER { reset(2), noAction(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Reset performance monitoring." DEFVAL { noAction } ::= { gnGenCarrierXEntry 2 } gnGenCarrierXSyncIdcDataBase OBJECT-TYPE SYNTAX INTEGER { noOperation(2), idcToDrawer(3), drawerToIdc(4), idcToAllDrawers(5) } ACCESS read-write STATUS mandatory DESCRIPTION "idcToDrawer - copy configuration from the IDC disk to the HW (this operation istraffic effected). drawerToIdc - copy configuration from HW to IDC disk. this operation used to clear User Configuration Mismatch alarm. idcToAllDrawers - copy configuration from the IDC disk to the all Drawer's HW (this operation istraffic effected)." DEFVAL { noOperation } ::= { gnGenCarrierXEntry 3 } --******************************************************************* -- This group should contain all the MIB support for -- Managers table, Trap masks and so on... gnAgn OBJECT IDENTIFIER ::= { gnSystem 2} gnAgnMgrTable OBJECT-TYPE SYNTAX SEQUENCE OF GnAgnMgrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the managers list that will receive traps." ::= { gnAgn 1 } gnAgnMgrEntry OBJECT-TYPE SYNTAX GnAgnMgrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the managers IP addresses and the trap filter options." INDEX { gnAgnMgrId} ::= { gnAgnMgrTable 1 } GnAgnMgrEntry ::= SEQUENCE { gnAgnMgrId INTEGER, gnAgnMgrIP IpAddress, gnAgnMgrAlarmGroupMask OCTET STRING, gnAgnMgrSeverityFilter OCTET STRING, gnAgnMgrTrapPort INTEGER } gnAgnMgrId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates an index of a specific manager" ::= { gnAgnMgrEntry 1 } gnAgnMgrIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the managers IP address. WRITE an IP address of all zeroes (0.0.0.0) will remove the entry. " ::= { gnAgnMgrEntry 2 } gnAgnMgrAlarmGroupMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "bit mask .1 is 'send a trap' 0 is 'dont send a trap'. The list of alarms from MSB to LSB is: bit 1 = Power Supply Alarm bit 2 = Cable Alarm bit 3 = Temperature Alarm bit 4 = External Alarm bit 5 = Radio Alarm bit 6 = Modem Alarm bit 7 = Line Alarm bit 8 = SDH Alarm bit 9 = BER Alarm bit 10 = System fault Alarm bit 11 = Maintenance Alarm If this field is 0, only standard traps will be sent to the manager" ::= { gnAgnMgrEntry 3 } gnAgnMgrSeverityFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-write STATUS mandatory DESCRIPTION "This is a bit mask value for masking traps according to its severity. There is a bit for each severity. If the relevant bit is on (1), then the Agent will send traps with this severity, and it won't send if the bit is off (0). The list of bits from LSB to MSB: bit 1 (LSB) = Event. bit 2 = Warning. bit 3 = Minor. bit 4 = Major. bit 5 (MSB) = Critical." ::= { gnAgnMgrEntry 4 } gnAgnMgrTrapPort OBJECT-TYPE SYNTAX INTEGER (70..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Port for sending the trap for each manager (possible values: 70-65535)" DEFVAL { 162 } ::= { gnAgnMgrEntry 5 } gnAgnLogFileData OBJECT IDENTIFIER ::= { gnAgn 2 } gnAgnLogFileMaxEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of entries. " ::= { gnAgnLogFileData 1 } gnAgnLogFileValidEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of valid entries in the current logfile. When this value exceeds 70% of capacity (100 entries), the management station should store the file in its hard disk. If the management station is not active, the MIB will display up to 100 recent logfile events" ::= { gnAgnLogFileData 2 } gnAgnLogFileAction OBJECT-TYPE SYNTAX INTEGER { clear(2), save(3), saveAndClear(4), noAction(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute allows for logfile actions, CLEARing the logfile and/or SAVING the logfile." DEFVAL { noAction } ::= { gnAgnLogFileData 3 } gnAgnLogFileTable OBJECT-TYPE SYNTAX SEQUENCE OF GnAgnLogFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the agents alarm and event log file." ::= { gnAgnLogFileData 4 } gnAgnLogFileEntry OBJECT-TYPE SYNTAX GnAgnLogFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the agents alarm and event log file." INDEX { gnAgnLogFileId} ::= { gnAgnLogFileTable 1 } GnAgnLogFileEntry ::= SEQUENCE { gnAgnLogFileId INTEGER, gnAgnLogFileValid INTEGER, gnAgnLogFileDate DisplayString, gnAgnLogFileTime DisplayString, gnAgnLogFileSeverity INTEGER, gnAgnLogFileText DisplayString, gnAgnLogFileDeviceCelsiusTemp INTEGER, gnAgnLogFileDevicePowerSupply OCTET STRING, gnAgnLogFileInternalCommunication OCTET STRING, gnAgnLogFileDeviceFanStatus OCTET STRING, gnAgnLogFileDeviceODUStatus OCTET STRING, gnAgnLogFileDeviceIDUStatus OCTET STRING, gnAgnLogFileOduCelsiusTemp INTEGER, gnAgnLogFileOduReceiveLevel INTEGER, gnAgnLogFileOduSynthesizerVCOLock OCTET STRING, gnAgnLogFileOduPowerSupply OCTET STRING, gnAgnLogFileLineBERCur INTEGER, gnAgnLogFileRadioBERCur INTEGER, gnAgnLogFileModStatus INTEGER, gnAgnLogFileDemodStatus INTEGER, gnAgnLogFileLastDemodDefectBlocks INTEGER, gnAgnLogFileLastDemodBytesCorrected INTEGER, gnAgnLogFileLastDemodBlocksCorrected INTEGER, gnAgnLogFileUniqueId INTEGER, gnAgnLogFileSource INTEGER, gnAgnLogFileTimeT INTEGER } gnAgnLogFileId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the index of an alarm logfile entry. Entry 1 is the most recent logfile event" ::= { gnAgnLogFileEntry 1 } gnAgnLogFileValid OBJECT-TYPE SYNTAX INTEGER { valid(2), notvalid(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the validity of the indexed alarm logfile entry. a VALID log entry is (2) and an INVALID entry is (3)." ::= { gnAgnLogFileEntry 2 } gnAgnLogFileDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This field is the date the alarm occurred, formatted as YYYY-MM-DD. YYYY represents the year, MM the month and DD -the day. " ::= { gnAgnLogFileEntry 3 } gnAgnLogFileTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This field is the hour the alarm occurred - format HH:MM. HH - Hour, MM - minute" ::= { gnAgnLogFileEntry 4 } gnAgnLogFileSeverity OBJECT-TYPE SYNTAX INTEGER { event(1), warning(3), minor(7), major(15), critical(31) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the severity of the alarm, 31 for CRITICAL, 15 for MAJOR, 7 for MINOR, 3 for WARNING and 1 for EVENT. " ::= { gnAgnLogFileEntry 5 } gnAgnLogFileText OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This field describes the alarm that occurred. Max length 40 characters." ::= { gnAgnLogFileEntry 6 } gnAgnLogFileDeviceCelsiusTemp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the temperature of the IDU in degrees Celsius, during the alarm acceptance. " ::= {gnAgnLogFileEntry 7 } gnAgnLogFileDevicePowerSupply OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Power supply status of the IDU, during the alarm acceptance bit 1 on = 3.3V faulty bit 2 on = -5V faulty bit 3 on = 5V faulty. bit 4 on = +8V faulty " ::= {gnAgnLogFileEntry 8 } gnAgnLogFileInternalCommunication OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the internal communication status of the IDU, during the alarm acceptance bit 1 = 1: between main CPU and ODU CPU. bit 2 = 1: between main CPU and MUX CPU. bit 3 = 1: between master main CPU and slave main CPU." ::= {gnAgnLogFileEntry 9 } gnAgnLogFileDeviceFanStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Fan status of the IDU, during the alarm acceptance bit 1 = Fan1 is faulty. bit 2 = Fan 2 is faulty." ::= {gnAgnLogFileEntry 10 } gnAgnLogFileDeviceODUStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODU status during the alarm acceptance bit 1 MSB bit 1 = Power Supply status bit 2 = Synthesizer lock status bit 3 = Tx level status bit 4 = ATPC status bit 5 = Rx level status bit 6 = Not currently used bit 7 = Temperature status bit 8 = Not currently used. bit 9 = Not currently used" ::= {gnAgnLogFileEntry 11 } gnAgnLogFileDeviceIDUStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the IDU status during the alarm acceptance bit 1 MSB bit 1 = Power status - bit 2 = Cable open status - bit 3 = Cable short status - bit 4 = Modem Lock status bit 5 = Temperature status bit 6 = Not currently used. bit 7 = loopback status bit 8 = External alarm 1 status bit 9 = External alarm 2 status bit 10 = External alarm 3 status bit 11 = External alarm 4 status bit 12 = External alarm 5 status bit 13 = External alarm 6 status bit 14 = External alarm 7 status bit 15 = External alarm 8 status bit 16 = Remote connectivity status. bit 17 = Inner communication status. " ::= {gnAgnLogFileEntry 12 } gnAgnLogFileOduCelsiusTemp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the temperature of the ODU in degrees Celsius, during the alarm acceptance." ::= {gnAgnLogFileEntry 13 } gnAgnLogFileOduReceiveLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the received signal level in DBM, during the alarm acceptance " ::= {gnAgnLogFileEntry 14 } gnAgnLogFileOduSynthesizerVCOLock OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Synthesizer status, during the alarm acceptance bit 1 on = TX IF synthesizer fault bit 2 on = RX IF synthesizer fault bit 3 on = Xband synthesizer fault bit 4 on = History TX IF synthesizer fault bit 5 on = History RX IF synthesizer fault bit 6 on = History Xband synthesizer fault " ::= {gnAgnLogFileEntry 15 } gnAgnLogFileOduPowerSupply OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODU power supply status, during the alarm acceptance bit 1 on = +5V faulty bit 2 on = +8V faulty bit 3 on = +12V faulty bit 4 on = -12V faulty." ::= {gnAgnLogFileEntry 16 } gnAgnLogFileLineBERCur OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the Line BER (Bit Error Rate), during the alarm acceptance. Included for future development, not currently supported." ::= {gnAgnLogFileEntry 17 } gnAgnLogFileRadioBERCur OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the Radio BER (Bit Error Rate), during the alarm acceptance. Included for future development, not currently supported." ::= {gnAgnLogFileEntry 18 } gnAgnLogFileModStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the Modulator status, during the alarm acceptance ok(2), modulatorFault(3)" ::= {gnAgnLogFileEntry 19 } gnAgnLogFileDemodStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the Demodulator status, during the alarm acceptance . This field is for internal use internal debugging " ::= {gnAgnLogFileEntry 20 } gnAgnLogFileLastDemodDefectBlocks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of the Defected blocks (blocks that couldn't be corrected) by the FEC, during the alarm acceptance last second." ::= {gnAgnLogFileEntry 21 } gnAgnLogFileLastDemodBytesCorrected OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of the bytes that were corrected by the FEC, during the alarm acceptance last second." ::= {gnAgnLogFileEntry 22 } gnAgnLogFileLastDemodBlocksCorrected OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of the blocks that were corrected by the FEC , during the alarm acceptance last second." ::= {gnAgnLogFileEntry 23 } gnAgnLogFileUniqueId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Unique Id for each log from 1 to 2,147,483,647 ( = 0x7FFFFFFF)." ::= {gnAgnLogFileEntry 24 } gnAgnLogFileSource OBJECT-TYPE SYNTAX INTEGER { interfaces(1), idc(2), drawer1(3), drawer2(4), tIdc1(257), tIdc2(258), tIdc3(259), tIdc4(260), tIdc5(261), tIdc6(262), tIdc7(263), tIdc8(264), tIdc9(265), tDrawer1(513), tDrawer2(514), tDrawer3(515), tDrawer4(516), tDrawer5(517), tDrawer6(518), tDrawer7(519), tDrawer8(520), tDrawer9(521), tDrawer10(522), tDrawer11(523), tDrawer12(524), tDrawer13(525), tDrawer14(526), tDrawer15(527), tXC1(769), tXC2(770), tXC3(771), tXC4(772), tXC5(773), tXC6(774) } ACCESS read-only STATUS mandatory DESCRIPTION "The soure drawer of the alarm." ::= {gnAgnLogFileEntry 25 } gnAgnLogFileTimeT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The time of the alarm represented by the number of seconds from 1.1.1970." ::= {gnAgnLogFileEntry 26 } gnAgnLogFileHitlessSwitchLogAdmin OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute allows for hitless logfile actions." DEFVAL { disable } ::= { gnAgnLogFileData 5 } gnAgnLogFileXCSwitchLogAdmin OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute allows for XC logfile actions." DEFVAL { disable } ::= { gnAgnLogFileData 6 } gnAgnExternAlarm OBJECT IDENTIFIER ::= { gnAgn 3 } gnAgnInExternAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF GnAgnInExternAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the input external alarm table. " ::= { gnAgnExternAlarm 1 } gnAgnInExternAlarmEntry OBJECT-TYPE SYNTAX GnAgnInExternAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the external alarm inputs." INDEX { gnAgnInExternAlarmDevId,gnAgnInExternAlarmIndex} ::= { gnAgnInExternAlarmTable 1 } GnAgnInExternAlarmEntry ::= SEQUENCE { gnAgnInExternAlarmDevId INTEGER, gnAgnInExternAlarmIndex INTEGER, gnAgnInExternAlarmEnable INTEGER, gnAgnInExternAlarmText DisplayString, gnAgnInExternAlarmSeverity INTEGER } gnAgnInExternAlarmDevId OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates device to which the external alarm is connected - 1 Local, 2 Remote" ::= { gnAgnInExternAlarmEntry 1 } gnAgnInExternAlarmIndex OBJECT-TYPE SYNTAX INTEGER(1..8) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the index of the input external alarm 1 to 8" ::= { gnAgnInExternAlarmEntry 2 } gnAgnInExternAlarmEnable OBJECT-TYPE SYNTAX INTEGER { disabled(2), enabled(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates if this Input alarm is enabled." DEFVAL { disabled } ::= { gnAgnInExternAlarmEntry 3 } gnAgnInExternAlarmText OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This field describes the external alarm. Max string 20 characters" DEFVAL {"Alarm Description"} ::= { gnAgnInExternAlarmEntry 4 } gnAgnInExternAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { event(1), warning(3), minor(7), major(15), critical(31) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the severity of the external alarm 31 CRITICAL ,15 MAJOR, 7 MINOR, 3 WARNING and 1 EVENT. " DEFVAL { 1} ::= { gnAgnInExternAlarmEntry 5 } gnAgnOutRelayAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF GnAgnOutRelayAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the output relay alarm table. " ::= { gnAgnExternAlarm 2 } gnAgnOutRelayAlarmEntry OBJECT-TYPE SYNTAX GnAgnOutRelayAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the output relay alarms." INDEX { gnAgnOutRelayAlarmDevId,gnAgnOutRelayAlarmIndex} ::= { gnAgnOutRelayAlarmTable 1 } GnAgnOutRelayAlarmEntry ::= SEQUENCE { gnAgnOutRelayAlarmDevId INTEGER, gnAgnOutRelayAlarmIndex INTEGER, gnAgnOutRelayAlarmType INTEGER } gnAgnOutRelayAlarmDevId OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates device from which the relay is sent from - 1 Local, 2 Remote" ::= { gnAgnOutRelayAlarmEntry 1 } gnAgnOutRelayAlarmIndex OBJECT-TYPE SYNTAX INTEGER(1..5) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the index of the Output Relay alarm 1 to 5" ::= { gnAgnOutRelayAlarmEntry 2 } gnAgnOutRelayAlarmType OBJECT-TYPE SYNTAX INTEGER { major(2), minor(3), warning(4), external(5), power(6), ber(7), line(8), loopback(9), lof(10), idu(11), odu(12), cable(13), remote(14), critical(15), testOn(16), off(17), xc(18) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the alarm/led that causes the relay to change its state" DEFVAL { major} ::= { gnAgnOutRelayAlarmEntry 3 } -- ******************************************************************* gnAgnFileTransfer OBJECT IDENTIFIER ::= { gnAgn 4 } gnAgnFileTransferDestination OBJECT-TYPE SYNTAX INTEGER { gnLocal (1)} -- gnRemote (2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The file destination. The file transfer destination will always be set to 1, LOCAL. " ::= { gnAgnFileTransfer 1 } gnAgnFileTransferServerIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the server from which the file is loaded " ::= { gnAgnFileTransfer 2 } gnAgnFileTransferFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name of the file to be loaded, format 8.3. " ::= { gnAgnFileTransfer 3 } gnAgnFileTransferTftpTotalTimeOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Receiving time-out value (seconds)." -- DEFVAL { 20 } ::= { gnAgnFileTransfer 4 } gnAgnFileTransferTransCmd OBJECT-TYPE SYNTAX INTEGER { gnStartMUXSoftwareDownLoad (1), gnStartODUSoftwareDownLoad (2), gnStartMainManagerSoftwareDownLoad (3), gnCancel (4), -- gnStartMUXSoftwareUpLoad (4), -- gnStartODUSoftwareUpLoad (5), gnNoOperation (255) } ACCESS read-write STATUS mandatory DESCRIPTION "The command to be executed on fileName at fileServerIP." ::= { gnAgnFileTransfer 5 } gnAgnFileTransfertFtpStatus OBJECT-TYPE SYNTAX INTEGER { gnTftpSessionPreStartSession (1), gnTftpSessionFileError (2), gnTftpSessionRcvBlock (3), gnTftpSessionRcvtimeout (4), gnTftpSessionRcvError (5), gnTftpSessionDone (6), gnNoTftpSession (255) } ACCESS read-only STATUS mandatory DESCRIPTION "Tftp session status " ::= { gnAgnFileTransfer 6 } gnAgnFileTransfertftpBlockCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of blocks received in the current tFtp session " ::= { gnAgnFileTransfer 7 } gnAgnFileTransferProtocol OBJECT-TYPE SYNTAX INTEGER { tftp (2), ftp (3) } ACCESS read-write STATUS mandatory DESCRIPTION "File transfer protocol: tftp or ftp." ::= { gnAgnFileTransfer 8 } gnAgnFileTransferUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "User name - only for ftp protocol." ::= { gnAgnFileTransfer 9 } gnAgnFileTransferPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Password - only for ftp protocol." ::= { gnAgnFileTransfer 10 } gnAgnFileTransferIDCVersionControl OBJECT-TYPE SYNTAX INTEGER { version1(1), version2(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Points to the IDC software version to be downloaded" ::= { gnAgnFileTransfer 11 } gnAgnFileTransferODCVersionControl OBJECT-TYPE SYNTAX INTEGER { version1(1), version2(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Points to the ODC software version to be downloaded" ::= { gnAgnFileTransfer 12 } --////////////////////////////////////// gnAgnInternalDownloadTable OBJECT-TYPE SYNTAX SEQUENCE OF GnAgnInternalDownloadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table controls the Internal Download process from manager to MUX and ODU (local and remote)." ::= { gnAgn 5 } gnAgnInternalDownloadEntry OBJECT-TYPE SYNTAX GnAgnInternalDownloadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the internal download process controls, for local and remote." INDEX { gnAgnInternalDownloadId} ::= { gnAgnInternalDownloadTable 1 } GnAgnInternalDownloadEntry ::= SEQUENCE { gnAgnInternalDownloadId INTEGER, gnAgnInternalDownloadOperation INTEGER, gnAgnInternalDownloadAction INTEGER, gnAgnInternalDownloadStatus INTEGER, gnAgnInternalDownloadBlockCount INTEGER, gnAgnInternalDownloadVersionControl INTEGER, gnAgnInternalDownloadFileSizeInBytes INTEGER, gnAgnInternalDownloadBytesCount INTEGER } gnAgnInternalDownloadId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates an index of a specific Internal Download operation." ::= { gnAgnInternalDownloadEntry 1 } gnAgnInternalDownloadOperation OBJECT-TYPE SYNTAX INTEGER { localMUX(2), localODU(3), remoteMUX(4), remoteODU(5), leftShelfODU(6), rightShelfODU(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The Operation Description" ::= { gnAgnInternalDownloadEntry 2 } gnAgnInternalDownloadAction OBJECT-TYPE SYNTAX INTEGER { start(2), cancel(3), clear(4), noAction(5), upLoadFpga(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter controls the download action operation. " DEFVAL { noAction} ::= { gnAgnInternalDownloadEntry 3 } gnAgnInternalDownloadStatus OBJECT-TYPE SYNTAX INTEGER { gnInternalDownloadSessionError (1), gnInternalDownloadSessionClearing (2), gnInternalDownloadSessionSendBlock (3), gnInternalDownloadSessiontimeout (4), gnInternalDownloadSessionDone (5), gnInternalDownloadSessionWaitForRetransmit (6), --phos odu gnNoInternalDownloadSession (255) } ACCESS read-only STATUS mandatory DESCRIPTION " Internal download session status " ::= { gnAgnInternalDownloadEntry 4 } gnAgnInternalDownloadBlockCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of blocks sent in the current session." ::= { gnAgnInternalDownloadEntry 5 } gnAgnInternalDownloadVersionControl OBJECT-TYPE SYNTAX INTEGER { version1(1), version2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Points to the software version to be uploaded" ::= { gnAgnInternalDownloadEntry 6 } gnAgnInternalDownloadFileSizeInBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of blocks in the current file" ::= { gnAgnInternalDownloadEntry 7 } gnAgnInternalDownloadBytesCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes sent in the current session" ::= { gnAgnInternalDownloadEntry 8 } --////////////////////////////////////// --////////////////////////////////////// gnAgnInterLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF GnAgnInterLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table controls the Inter Link Download process between local and remote masters and between master and slave (local or remote). Each session transfers MUX, ODU or manager (IDC) software." ::= { gnAgn 6 } gnAgnInterLinkEntry OBJECT-TYPE SYNTAX GnAgnInterLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the process controls for the interlink download process, for local and remote." INDEX { gnAgnInterLinkId} ::= { gnAgnInterLinkTable 1 } GnAgnInterLinkEntry ::= SEQUENCE { gnAgnInterLinkId INTEGER, gnAgnInterLinkSide INTEGER, gnAgnInterLinkSource INTEGER, gnAgnInterLinkDestination INTEGER, gnAgnInterLinkSoftware INTEGER, gnAgnInterLinkAction INTEGER, gnAgnInterLinkStatus INTEGER, gnAgnInterLinkBlockCount INTEGER } gnAgnInterLinkId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the index of a specific InterLink operation." ::= { gnAgnInterLinkEntry 1 } gnAgnInterLinkSide OBJECT-TYPE SYNTAX INTEGER { local(2), remote(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The Link Side " ::= { gnAgnInterLinkEntry 2 } gnAgnInterLinkSource OBJECT-TYPE SYNTAX INTEGER { me(2), mate(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The source distribution center." ::= { gnAgnInterLinkEntry 3 } gnAgnInterLinkDestination OBJECT-TYPE SYNTAX INTEGER { me(2), mate(3), remote(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The destination distribution center. The destination may be selected as the local IDU being contacted (me), the collocated local IDU, in a protected configuration (mate) or it may be selected to be the remote IDU." ::= { gnAgnInterLinkEntry 4 } gnAgnInterLinkSoftware OBJECT-TYPE SYNTAX INTEGER { manager(2), mux(3), odu(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The software type to be transferred. MUX, ODU or IDU (referred to as manager)." ::= { gnAgnInterLinkEntry 5 } gnAgnInterLinkAction OBJECT-TYPE SYNTAX INTEGER { start(2), cancel(3), noAction(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter controls the interlink action operation. " DEFVAL { noAction} ::= { gnAgnInterLinkEntry 6 } gnAgnInterLinkStatus OBJECT-TYPE SYNTAX INTEGER { gnInterLinkSessionError (1), gnInterLinkSessionClearing (2), gnInterLinkSessionSendBlock (3), gnInterLinkSessiontimeout (4), gnInterLinkSessionDone (5), gnNoInterLinkSession (255) } ACCESS read-only STATUS mandatory DESCRIPTION " Inter-link session status " ::= { gnAgnInterLinkEntry 7 } gnAgnInterLinkBlockCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of blocks sent in the current session." ::= { gnAgnInterLinkEntry 8 } --////////////////////////////////////// gnSoftwareVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF GnSoftwareVersionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the IDU, MUX, ODU & WS software versions; local and remote." ::= { gnAgn 7 } gnSoftwareVersionEntry OBJECT-TYPE SYNTAX GnSoftwareVersionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the currently operating IDU, ODU and MUX software versions." INDEX { gnSoftwareVersionId } ::= { gnSoftwareVersionTable 1 } GnSoftwareVersionEntry ::= SEQUENCE { gnSoftwareVersionId INTEGER, gnSoftwareVersionIDU DisplayString, gnSoftwareVersionMUX DisplayString, gnSoftwareVersionODU DisplayString, gnSoftwareVersionIDUPostResetVersion DisplayString, gnSoftwareVersionMUXPostResetVersion DisplayString, gnSoftwareVersionODUPostResetVersion DisplayString, gnSoftwareVersionMuxAlteraVer DisplayString, gnSoftwareIDCVersionControl INTEGER, gnSoftwareVersionWSAlteraVer DisplayString, gnSoftwareVersionWSPostResetVersion DisplayString, gnSoftwareVersionMrmcVer DisplayString, gnSoftwareVersionMrmcPostResetVer DisplayString, gnSoftwareVersionBootSoftVer DisplayString, gnSoftwareVersionBootFlashVer DisplayString, gnSoftwareVersionAcmLutVer DisplayString, gnSoftwareVersionAcmLutVerPostResetVer DisplayString, gnSoftwareVersionSfdVer DisplayString } gnSoftwareVersionId OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The ID indicates which device is involved in the specific row. The software table includes two rows, one for the local radio and one for the remote radio." ::= { gnSoftwareVersionEntry 1 } gnSoftwareVersionIDU OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the IDU software version." ::= { gnSoftwareVersionEntry 2 } gnSoftwareVersionMUX OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the MUX software version." ::= { gnSoftwareVersionEntry 3 } gnSoftwareVersionODU OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODU software version." ::= { gnSoftwareVersionEntry 4 } gnSoftwareVersionIDUPostResetVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the IDU post reset software version." ::= { gnSoftwareVersionEntry 5 } gnSoftwareVersionMUXPostResetVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the MUX post reset software version." ::= { gnSoftwareVersionEntry 6 } gnSoftwareVersionODUPostResetVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODU post reset software version." ::= { gnSoftwareVersionEntry 7 } gnSoftwareVersionMuxAlteraVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This string contains the MUX altera versions" ::= { gnSoftwareVersionEntry 8 } gnSoftwareIDCVersionControl OBJECT-TYPE SYNTAX INTEGER { version1(1), version2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Points to the software version that will run on the next reset" ::= { gnSoftwareVersionEntry 9 } gnSoftwareVersionWSAlteraVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the WS software version" ::= { gnSoftwareVersionEntry 10 } gnSoftwareVersionWSPostResetVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the WS post reset software version" ::= { gnSoftwareVersionEntry 11 } gnSoftwareVersionMrmcVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the MRMC filter table software version" ::= { gnSoftwareVersionEntry 12 } gnSoftwareVersionMrmcPostResetVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the MRMC filter table post reset software version" ::= { gnSoftwareVersionEntry 13 } gnSoftwareVersionBootSoftVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the BOOT software version" ::= { gnSoftwareVersionEntry 14 } gnSoftwareVersionBootFlashVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the BOOT FLASH version" ::= { gnSoftwareVersionEntry 15 } gnSoftwareVersionAcmLutVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ACM LUT software version" ::= { gnSoftwareVersionEntry 16 } gnSoftwareVersionAcmLutVerPostResetVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ACM LUT post reset software version" ::= { gnSoftwareVersionEntry 17 } gnSoftwareVersionSfdVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the SFD software version" ::= { gnSoftwareVersionEntry 18 } --////////////////////////////////////// gnAgnNTPCfg OBJECT IDENTIFIER ::= { gnAgn 8 } gnAgnNTPCfgServerIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The IP address of the server from which the current time is loaded." ::= { gnAgnNTPCfg 1 } gnAgnNTPCfgOffsetFromUTC OBJECT-TYPE SYNTAX INTEGER (-1439..1439) ACCESS read-write STATUS mandatory DESCRIPTION " The offset from Coordinated Universal Time (minutes). Possible values: -1439..1439. " DEFVAL {0} ::= { gnAgnNTPCfg 2 } gnAgnNTPCfgSummerAdjOffset OBJECT-TYPE SYNTAX INTEGER (-1439..1439) ACCESS read-write STATUS mandatory DESCRIPTION " The summer adjustment offset (minutes). Possible values: -1439..1439. " DEFVAL {0} ::= { gnAgnNTPCfg 3 } gnAgnNTPCfgSummerAdjStart OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The summertime adjustment start. In order to set this value: 1.Turn every parameter (month, day, hour, minute) to hexadecimal. 2.Write them all together - from left to right. 3.Turn the accepted number to decimal basis. For example: in order to set 11:27:1:55 --> 11 = 0x0b, 27 = 0x1b, 1 = 0x01, 55 = 0x37 --> the 4 parameters together: 0x0b1b0137 = 186319159 (the last number is the one to set)." ::= { gnAgnNTPCfg 4 } gnAgnNTPCfgSummerAdjEnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The summertime adjustment end. In order to set this value: 1.Turn every parameter (month, day, hour, minute) to hexadecimal. 2.Write them all together - from left to right. 3.Turn the accepted number to decimal basis. For example: in order to set 11:27:1:55 --> 11 = 0x0b, 27 = 0x1b, 1 = 0x01, 55 = 0x37 --> the 4 parameters together: 0x0b1b0137 = 186319159 (the last number is the one to set)." ::= { gnAgnNTPCfg 5 } gnAgnNTPCfgEnableAuth OBJECT-TYPE SYNTAX INTEGER { disabled(2), des(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This value indicates if the Authentication is enabled. " DEFVAL {disabled} ::= { gnAgnNTPCfg 6 } gnAgnNTPCfgAuthSecretKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) ACCESS read-write STATUS mandatory DESCRIPTION " The authentication secret key (HEX). Not relevant when authentication is disable. " ::= { gnAgnNTPCfg 7 } gnAgnNTPCfgAuthPublicKey OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION " The authentication public key is an integer number. The valid values: 1-4294967295. Not relevant when authentication is disable. " ::= { gnAgnNTPCfg 8 } gnAgnNTPCfgUpdateInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION " The time interval between sending NTP requests to the NTP server (minutes). Possible values: 1-65535. " DEFVAL {10} ::= { gnAgnNTPCfg 9 } gnAgnNTPCfgProtocolType OBJECT-TYPE SYNTAX INTEGER { ntp(2), sntp(3) } ACCESS read-write STATUS mandatory DESCRIPTION " " DEFVAL {ntp} ::= { gnAgnNTPCfg 10 } gnAgnInBandMng OBJECT IDENTIFIER ::= { gnAgn 9 } gnAgnInBandMngEthernetIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " The ethernet IP of the gateway network element." ::= { gnAgnInBandMng 1 } gnAgnInBandMngEthernetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The IP mask of the gateway network element." ::= { gnAgnInBandMng 2 } gnAgnInBandMngPppIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " The PPP IP address of the gateway network element." ::= { gnAgnInBandMng 3 } gnAgnInBandMngPppMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The PPP IP mask of the gateway network element." ::= { gnAgnInBandMng 4 } gnAgnInBandMngDefRoute OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The IP address of the default gateway/router to the internet. " ::= { gnAgnInBandMng 5 } gnAgnInBandMngEnable OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable/Disable in-band management." ::= { gnAgnInBandMng 6 } gnAgnInBandMngNetworkElementType OBJECT-TYPE SYNTAX INTEGER { networkElement(2), gateway(3) } ACCESS read-write STATUS mandatory DESCRIPTION " The element type of a single unit on the inband network (Gateway or Network Element). " ::= { gnAgnInBandMng 7 } gnAgnInBandMngRadioChannel OBJECT-TYPE SYNTAX INTEGER { dccr(2), dccm(3), mediaSpecific128k(4), proprietary(5), userChannel(6) } ACCESS read-write STATUS mandatory DESCRIPTION " The channel the in-band-management goes over (DCCR\DCCM\etc.). " ::= { gnAgnInBandMng 8 } gnAgnInBandMngUnknownPackets OBJECT-TYPE SYNTAX INTEGER { transparent(2), discard(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Select if unknown packets will be transparently transmitted over the RING or discarded and dropped." ::= { gnAgnInBandMng 9 } gnAgnInBandMngTTL OBJECT-TYPE SYNTAX INTEGER (5..64) ACCESS read-write STATUS mandatory DESCRIPTION " Time To Live." ::= { gnAgnInBandMng 10 } gnAgnInBandMngRingIpSubnet OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The IP subnet address of the ring." ::= { gnAgnInBandMng 11 } gnAgnInBandMngRingIpMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The IP mask of the ring subnet address." ::= { gnAgnInBandMng 12 } gnAgnInBandMngNetworkId OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION " Identification for single link path of PPPoE over cross-networks. " ::= { gnAgnInBandMng 13 } gnAgnInBandMngLineMode OBJECT-TYPE SYNTAX INTEGER { inbandFiber(2), forcePPPoE(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable the user to force PPPoE mode instead of DCCR line communication. " ::= { gnAgnInBandMng 14 } gnAgnInBandMngFiberChannel OBJECT-TYPE SYNTAX INTEGER { dccr(2), dccm(3), -- mediaSpecific128k(4), userChannel(5) } ACCESS read-write STATUS mandatory DESCRIPTION " " DEFVAL { dccr} ::= { gnAgnInBandMng 15 } gnAgnInBandMngTribChannel OBJECT-TYPE SYNTAX INTEGER { disable(2), dccr(3), dccm(4) } ACCESS read-write STATUS mandatory DESCRIPTION " " DEFVAL { dccr} ::= { gnAgnInBandMng 16 } gnAgnInBandMngXChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF GnAgnInBandMngXChannelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the inband channels mapping." ::= { gnAgnInBandMng 17 } gnAgnInBandMngXChannelEntry OBJECT-TYPE SYNTAX GnAgnInBandMngXChannelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the inband channel table. This table contains a row for every channel (1..4). First 3 physical channels are available in the 8 possible mapping options (on both carrier drawers). An additional channel (4) is available on the IDC (PPPoE))." INDEX { gnAgnInBandMngXChannelId } ::= { gnAgnInBandMngXChannelTable 1 } GnAgnInBandMngXChannelEntry ::= SEQUENCE { gnAgnInBandMngXChannelId INTEGER, gnAgnInBandMngXChannelIfIndex INTEGER, gnAgnInBandMngXChannelType INTEGER, gnAgnInBandMngXChannelState INTEGER, gnAgnInBandMngXChannelNeighborIP IpAddress, gnAgnInBandMngXChannelStatus INTEGER } gnAgnInBandMngXChannelId OBJECT-TYPE SYNTAX INTEGER { channel1(1), channel2(2), channel3(3), channel4(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The channel Id" ::= { gnAgnInBandMngXChannelEntry 1 } gnAgnInBandMngXChannelIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The ifIndex of the interface that is mapped to this channel" ::= { gnAgnInBandMngXChannelEntry 2 } gnAgnInBandMngXChannelType OBJECT-TYPE SYNTAX INTEGER { proprietary(2), dccr(3), dccm(4), mediaspecific(5), pppoe(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of channel the in-band-management goes over. Default value for channels 1 and 3 in the carrier drawers is Proprietary. Channel 2 not allowed to be Proprietary. In protection the ch_type of ch#3 can not be modified Channel 4 must be PPPoE" ::= { gnAgnInBandMngXChannelEntry 3 } gnAgnInBandMngXChannelState OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable the in band channel" ::= { gnAgnInBandMngXChannelEntry 4 } gnAgnInBandMngXChannelNeighborIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The PPP IP address of the gateway network element." ::= { gnAgnInBandMngXChannelEntry 5 } gnAgnInBandMngXChannelStatus OBJECT-TYPE SYNTAX INTEGER { up(2), down(3), closed(4) } ACCESS read-only STATUS mandatory DESCRIPTION " This MIB parameter defines the In-band PPP connection status. If the MIB value is up the PPP connection is up and running If the MIB value is down the PPP connection is down and is in initialization state. (Trying to establish a connection) If the MIB value is closed the PPP connection is down and is not trying open a connection." ::= { gnAgnInBandMngXChannelEntry 6 } gnAgnInBandMngXEnableInbandChannels OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "This configuration enables/disables the in-band channels: 1-4. The LSB represent channel 1, the 2nd bit channel 2, etc. If a bit is on (1) it's channel is enabled. Example: if channels 2 & 4 are enabled and channels 1 & 3 are disabled, then the binary value is 1010, so the MIB value (decimal integer) will be 10." DEFVAL { 0 } ::= { gnAgnInBandMng 18 } gnAgnInBandMngMainGNEInterface OBJECT-TYPE SYNTAX INTEGER { default(2), channel1(3), channel2(4), channel3(5), channel4(6) } ACCESS read-write STATUS mandatory DESCRIPTION "determines the primary GNE channel. Default means fixed channel prioritizing, in the following order (from first to last): Right Carrier Radio interface, [STM-1] Line interface on either Left or Right Carrier, Left Carrier Radio interface and PPPoE interface." DEFVAL { 2 } ::= { gnAgnInBandMng 19 } --////////////////////////////////////// gnNeighborIP OBJECT IDENTIFIER ::= { gnAgn 10 } gnNeighborInBandTable OBJECT-TYPE SYNTAX SEQUENCE OF GnNeighborInBandEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the IP addresses of the units that are connected Inband." ::= { gnNeighborIP 1 } gnNeighborInBandEntry OBJECT-TYPE SYNTAX GnNeighborInBandEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the IP addresses of the units that are connected Inband. This table contains a row for every interface which type is logically connected. for example regenerator which is connected in band has two neighbors: the first (index 1) the remote radio unit and the second the remote fiber neighbor (index 2)." INDEX { ifIndex } ::= { gnNeighborInBandTable 1 } GnNeighborInBandEntry ::= SEQUENCE { gnNeighborInBandIP IpAddress, gnNeighborInBandStatus INTEGER } gnNeighborInBandIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The PPP IP address of the gateway network element." ::= { gnNeighborInBandEntry 1 } gnNeighborInBandStatus OBJECT-TYPE SYNTAX INTEGER { up(2), down(3), closed(4) } ACCESS read-only STATUS mandatory DESCRIPTION " This MIB parameter defines the In-band PPP connection status. If the MIB value is up the PPP connection is up and running If the MIB value is down the PPP connection is down and is in initialization state. (Trying to establish a connection) If the MIB value is closed the PPP connection is down and is not trying open a connection." ::= { gnNeighborInBandEntry 2 } gnNeighborMateIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " The Protection Mate IP address." ::= { gnNeighborIP 2 } gnNeighborRemoteRadioIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " The IP address of the Radio Remote IDU." ::= { gnNeighborIP 3 } gnNeighborInBandXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnNeighborInBandXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the IP addresses of the units that are connected Inband." ::= { gnNeighborIP 4 } gnNeighborInBandXEntry OBJECT-TYPE SYNTAX GnNeighborInBandXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the IP addresses of the units that are connected Inband. This table contains a row for every interface which type is logically connected. for example regenerator which is connected in band has two neighbors: the first (index 1) the remote radio unit and the second the remote fiber neighbor (index 2)." INDEX { gnNeighborInBandXId } ::= { gnNeighborInBandXTable 1 } GnNeighborInBandXEntry ::= SEQUENCE { gnNeighborInBandXId INTEGER, gnNeighborInBandXIP IpAddress } gnNeighborInBandXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnNeighborInBandXEntry 1 } gnNeighborInBandXIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The PPP IP address of the gateway network element." ::= { gnNeighborInBandXEntry 2 } gnNeighborIpTable OBJECT-TYPE SYNTAX SEQUENCE OF GnNeighborIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table shows the Neighbor IP for each STM connection." ::= { gnNeighborIP 5 } gnNeighborIpEntry OBJECT-TYPE SYNTAX GnNeighborIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "." INDEX { ifIndex } ::= { gnNeighborIpTable 1 } GnNeighborIpEntry ::= SEQUENCE { gnNeighborIpDetectMode INTEGER, gnNeighborIpAddress IpAddress, gnNeighborIpRemoteIfIndex INTEGER, gnNeighborIpRemoteType INTEGER } gnNeighborIpDetectMode OBJECT-TYPE SYNTAX INTEGER { disable(2), manual(3), auto(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The Neighbor detect can be done automatically or to be manually insreted. Disable marks that the IP Detect is not used." ::= { gnNeighborIpEntry 1 } gnNeighborIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The neighbor IP address." ::= { gnNeighborIpEntry 2 } gnNeighborIpRemoteIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The If index of the neighbor IP address connected to the current If Index." ::= { gnNeighborIpEntry 3 } gnNeighborIpRemoteType OBJECT-TYPE SYNTAX INTEGER { regenerator(1), access(2), adm(3), unit1500p(4), admline2line(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The Type of the neighbor." ::= { gnNeighborIpEntry 4 } ---------------- gnAgnSNMPCfg OBJECT IDENTIFIER ::= { gnAgn 11 } gnAgnSNMPCfgTrapCommunity OBJECT-TYPE SYNTAX OCTET STRING(SIZE(12)) ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { gnAgnSNMPCfg 1 } gnAgnSNMPCfgReadCommunity OBJECT-TYPE SYNTAX OCTET STRING(SIZE(12)) ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { gnAgnSNMPCfg 2 } gnAgnSNMPCfgWriteCommunity OBJECT-TYPE SYNTAX OCTET STRING(SIZE(12)) ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { gnAgnSNMPCfg 3 } gnAgnPrvt OBJECT IDENTIFIER ::= { gnAgn 12 } gnAgnPrvtCmd OBJECT-TYPE SYNTAX INTEGER { noOperation(2), cNV(3), cNVBtr(4) } ACCESS read-write STATUS mandatory DESCRIPTION " ." DEFVAL { noOperation } ::= { gnAgnPrvt 1 } gnAgnPrvtCmdStat OBJECT-TYPE SYNTAX INTEGER { ready(2), cNVPass(3), cNVFail(4), cNVBtrPass(5), cNVBtrFail(6) } ACCESS read-only STATUS mandatory DESCRIPTION " ." DEFVAL { ready } ::= { gnAgnPrvt 2 } gnSoftwareDrawerVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF GnSoftwareDrawerVersionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the IDU, MUX & ODU software versions; local and remote." ::= { gnAgn 13 } gnSoftwareDrawerVersionEntry OBJECT-TYPE SYNTAX GnSoftwareDrawerVersionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the currently operating IDU, ODU and MUX software versions." INDEX { gnSoftwareDrawerId } ::= { gnSoftwareDrawerVersionTable 1 } GnSoftwareDrawerVersionEntry ::= SEQUENCE { gnSoftwareDrawerId INTEGER, gnSoftwareDrawerVersionMUX DisplayString, gnSoftwareDrawerVersionMUXPostResetVersion DisplayString, gnSoftwareDrawerVersionODU DisplayString, gnSoftwareDrawerVersionODUPostResetVersion DisplayString, gnSoftwareDrawerVersionModemFile DisplayString, gnSoftwareDrawerVersionModemFilePostResetVersion DisplayString, gnSoftwareDrawerVersionModemScript DisplayString, gnSoftwareDrawerVersionModemScriptPostResetVersion DisplayString, gnSoftwareDrawerVersionRfuFpgaVersion DisplayString } gnSoftwareDrawerId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The ID indicates which Drawer is involved in the specific row. " ::= { gnSoftwareDrawerVersionEntry 1 } gnSoftwareDrawerVersionMUX OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the MUX software version." ::= { gnSoftwareDrawerVersionEntry 2 } gnSoftwareDrawerVersionMUXPostResetVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODU software version." ::= { gnSoftwareDrawerVersionEntry 3 } gnSoftwareDrawerVersionODU OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the MUX post reset software version." ::= { gnSoftwareDrawerVersionEntry 4 } gnSoftwareDrawerVersionODUPostResetVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the MUX post reset software version." ::= { gnSoftwareDrawerVersionEntry 5 } gnSoftwareDrawerVersionModemFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Modem software version." ::= { gnSoftwareDrawerVersionEntry 6 } gnSoftwareDrawerVersionModemFilePostResetVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Modem post reset software version." ::= { gnSoftwareDrawerVersionEntry 7 } gnSoftwareDrawerVersionModemScript OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Modem software version." ::= { gnSoftwareDrawerVersionEntry 8 } gnSoftwareDrawerVersionModemScriptPostResetVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Modem post reset software version." ::= { gnSoftwareDrawerVersionEntry 9 } gnSoftwareDrawerVersionRfuFpgaVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Rfu Fpga software version." ::= { gnSoftwareDrawerVersionEntry 10 } -- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ gnAgnCurrentAlarm OBJECT IDENTIFIER ::= { gnAgn 14 } gnAgnCurrentAlarmLastChange OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This counter initialized with random number after resest, and incremented on each change in the gnAgnCurrentAlarmTable (either add or remove of an entery)." ::= { gnAgnCurrentAlarm 1 } gnAgnCurrentAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF GnAgnCurrentAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table includes the currently open alarm (when a RAISED trap is sent, an alarm is added to the table, when a CLEAR trap is sent, the alarm is removed." ::= { gnAgnCurrentAlarm 2 } gnAgnCurrentAlarmEntry OBJECT-TYPE SYNTAX GnAgnCurrentAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the info of a currently RAISED trap." INDEX { gnAgnCurrentAlarmCounter } ::= { gnAgnCurrentAlarmTable 1 } GnAgnCurrentAlarmEntry ::= SEQUENCE { gnAgnCurrentAlarmCounter INTEGER, gnAgnCurrentAlarmSeverity INTEGER, gnAgnCurrentAlarmId INTEGER, gnAgnCurrentAlarmIfIndex INTEGER, gnAgnCurrentAlarmOrigin INTEGER, gnAgnCurrentAlarmUnit INTEGER, gnAgnCurrentAlarmTrapID INTEGER, gnAgnCurrentAlarmTimeT INTEGER, gnAgnCurrentAlarmText DisplayString } gnAgnCurrentAlarmCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A running counter of open alarm, the counter is incremented on every new RAISED trap. It is cleared after reset. This counter is (optionaly) attached to each trap." ::= { gnAgnCurrentAlarmEntry 1 } gnAgnCurrentAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { event (1), warning (3), minor (7), major (15), critical (31) } ACCESS read-only STATUS mandatory DESCRIPTION "The current Alarm severity" ::= { gnAgnCurrentAlarmEntry 2 } gnAgnCurrentAlarmId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Alarm Identifier (contains alarm type and interface). Same AlarmId for rasie and clear alarms." ::= { gnAgnCurrentAlarmEntry 3 } gnAgnCurrentAlarmIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface Index where the alarm occurred, alarms that are not associated with specific interface will have the following value: For IDC related alarms the value is: 65001 For drawer1 related alarms the value is: 65003 For drawer2 related alarms the value is: 65004 If Alarm's origin is bigger than 256, it will be 65000 + the origin" ::= { gnAgnCurrentAlarmEntry 4 } gnAgnCurrentAlarmOrigin OBJECT-TYPE SYNTAX INTEGER { interfaces(1), idc(2), drawer1(3), drawer2(4), unKnown(5), tIdc1(257), tIdc2(258), tIdc3(259), tIdc4(260), tIdc5(261), tIdc6(262), tIdc7(263), tIdc8(264), tIdc9(265), tDrawer1(513), tDrawer2(514), tDrawer3(515), tDrawer4(516), tDrawer5(517), tDrawer6(518), tDrawer7(519), tDrawer8(520), tDrawer9(521), tDrawer10(522), tDrawer11(523), tDrawer12(524), tDrawer13(525), tDrawer14(526), tDrawer15(527), tXC1(769), tXC2(770), tXC3(771), tXC4(772), tXC5(773), tXC6(774) } ACCESS read-only STATUS mandatory DESCRIPTION "The origin drawer of the alarm (if applicable, otherwise it will be idc(2))." ::= {gnAgnCurrentAlarmEntry 5} gnAgnCurrentAlarmUnit OBJECT-TYPE SYNTAX INTEGER { idc(2), odu(3), mux(4), modem(5), drawer(6), unKnown(7), xc(9) } ACCESS read-only STATUS mandatory DESCRIPTION "The unit of the alarm." ::= {gnAgnCurrentAlarmEntry 6} gnAgnCurrentAlarmTrapID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the RAISED trap that was sent when this alarm was raised." ::= { gnAgnCurrentAlarmEntry 7 } gnAgnCurrentAlarmTimeT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Timestamp of this alarm, this number is the seconds from midnight 1.1.1970." ::= { gnAgnCurrentAlarmEntry 8 } gnAgnCurrentAlarmText OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The alarm display text (same as the text in the sent trap)." ::= { gnAgnCurrentAlarmEntry 9} gnNMS OBJECT IDENTIFIER ::= { gnAgn 15 } --////////////////////////////////////// gnApplicFileTable OBJECT-TYPE SYNTAX SEQUENCE OF GnApplicFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the application file list." ::= { gnAgn 16 } gnApplicFileEntry OBJECT-TYPE SYNTAX GnApplicFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the application file list." INDEX { gnApplicFileId } ::= { gnApplicFileTable 1 } GnApplicFileEntry ::= SEQUENCE { gnApplicFileId INTEGER, gnApplicFileName DisplayString, gnApplicFileVersion DisplayString, gnApplicFileCreateDate OCTET STRING, gnApplicFileDownloadDate OCTET STRING, gnApplicFileType INTEGER, gnApplicFileSubType DisplayString, gnApplicFileFirmware INTEGER, gnApplicFileGeneralPurpose INTEGER, gnApplicFileSize INTEGER, gnApplicFileCompressed INTEGER, gnApplicFileDssSupport INTEGER, gnApplicFileCrcSupport INTEGER } gnApplicFileId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID indicates which device is involved in the specific row. The application file table includes two rows, one for the local radio and one for the remote radio." ::= { gnApplicFileEntry 1 } gnApplicFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the application file name." ::= { gnApplicFileEntry 2 } gnApplicFileVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the application file version." ::= { gnApplicFileEntry 3 } gnApplicFileCreateDate OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the application file download date Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 07 c8 05 1a 0d 1e 0f 00 ( 1992 -5 -26,13:30:15 ) Note that if only local time is known, then timezone information (fields 8-10) is not present." ::= { gnApplicFileEntry 4 } gnApplicFileDownloadDate OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the application file download date Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 07 c8 05 1a 0d 1e 0f 00 ( 1992 -5 -26,13:30:15 ) Note that if only local time is known, then timezone information (fields 8-10) is not present." ::= { gnApplicFileEntry 5 } gnApplicFileType OBJECT-TYPE SYNTAX INTEGER { idc(1), mux(2), odu(3), modem(4), boot(5), modemConfig(6), wayside(7), bootRom(8), rfuFpga(9), rfuConfig(10), mrmcTable(11), xc(12), xcErrorgen(13), aAux(14), license(15), frameConfigTable(16) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the application file type." ::= { gnApplicFileEntry 6 } gnApplicFileSubType OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the application file sub type." ::= { gnApplicFileEntry 7 } gnApplicFileFirmware OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the application file firmware." ::= { gnApplicFileEntry 8 } gnApplicFileGeneralPurpose OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the application file General Purpose." ::= { gnApplicFileEntry 9 } gnApplicFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the application file size in bytes." ::= { gnApplicFileEntry 10 } gnApplicFileCompressed OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This is indicate the application file compress status." ::= { gnApplicFileEntry 11 } gnApplicFileDssSupport OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This is indicate the application file DSS support." ::= { gnApplicFileEntry 12 } gnApplicFileCrcSupport OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This is indicate the application file CRC support." ::= { gnApplicFileEntry 13 } --////////////////////////////////////// gnDiskCapacityData OBJECT IDENTIFIER ::= { gnAgn 17 } gnDiskUsedspace OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID indicates Disk Used space." ::= { gnDiskCapacityData 1 } gnDiskFreespace OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID indicates Disk Free space." ::= { gnDiskCapacityData 2 } --////////////////////////////////////// gnUnits OBJECT IDENTIFIER ::= { ceragon 3 } gnODU OBJECT IDENTIFIER ::= { gnUnits 1 } gnOduCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the Outdoor part of the system." ::= { gnODU 1 } gnOduCfgEntry OBJECT-TYPE SYNTAX GnOduCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the ODU Configuration Table. This table contains two rows, indexed by ifIndex= 1 for local ODU and ifIndex = 101 for remote ODU." INDEX { ifIndex } ::= { gnOduCfgTable 1 } GnOduCfgEntry ::= SEQUENCE { gnOduCfgTransmitterFrequency INTEGER, gnOduCfgRLPerfMonThresh1 INTEGER, gnOduCfgRLPerfMonThresh2 INTEGER, gnOduCfgATPCStatus INTEGER, gnOduCfgMUTEStatus INTEGER, gnOduCfgAntennaType INTEGER, gnOduCfgTransmitLevel INTEGER, gnOduCfgRealTxFreqNumber INTEGER, gnOduCfgRealRxFreqNumber INTEGER, gnOduCfgMinTxFreqNumber INTEGER, gnOduCfgMaxTxFreqNumber INTEGER, gnOduCfgMaxTxLevel INTEGER, gnOduCfgRefRsl INTEGER, gnOduCfgForceRmtMuteTx INTEGER, gnOduCfgForceRmtMaxTx INTEGER, gnOduCfgTLPerfMonThresh1 INTEGER, gnOduCfgMinRxFreqNumber INTEGER, gnOduCfgMaxRxFreqNumber INTEGER, gnOduCfgOduLoopSupport INTEGER, gnOduCfgOduModel INTEGER, gnOduCfgFreqPlanStandard DisplayString, gnOduCfgFreqDevider INTEGER } gnOduCfgTransmitterFrequency OBJECT-TYPE SYNTAX INTEGER (0..20) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the radio TX channel number. WRITE will change the LOCAL side only. Not all radios will support TX frequency change via channel numbers." DEFVAL { 1} ::= { gnOduCfgEntry 1 } gnOduCfgRLPerfMonThresh1 OBJECT-TYPE SYNTAX INTEGER (-75..-15) ACCESS read-write STATUS mandatory DESCRIPTION "When the Received Level (RL) exceeds this threshold a performance monitoring RL1 counter increments." DEFVAL { -50} ::= { gnOduCfgEntry 2} gnOduCfgRLPerfMonThresh2 OBJECT-TYPE SYNTAX INTEGER (-75..-15) ACCESS read-write STATUS mandatory DESCRIPTION "When the Received Level (RL) exceeds this threshold a performance monitoring RL2 counter increments." DEFVAL { -70} ::= { gnOduCfgEntry 3} gnOduCfgATPCStatus OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates if the ATPC option is enabled or disabled." DEFVAL { on} ::= { gnOduCfgEntry 4} gnOduCfgMUTEStatus OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates if transmitter will be in mute state. (Mute on -> don't transmit) " DEFVAL { off} ::= { gnOduCfgEntry 5 } gnOduCfgAntennaType OBJECT-TYPE SYNTAX INTEGER { oneFoot(2), twoFeet(3), threeFeet(4), fourFeet(5), sixFeet(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the size of the antenna used in the ODU. This attribute will not auto-detect the antenna size. It is used for the unfaded RSL calculation feature included in the element manager." DEFVAL { oneFoot } ::= { gnOduCfgEntry 6 } gnOduCfgTransmitLevel OBJECT-TYPE SYNTAX INTEGER (-50..30) ACCESS read-write STATUS mandatory DESCRIPTION "This is the transmitter output power level of the signal transmitted by the radios, displayed in DBM. " ::= { gnOduCfgEntry 7 } gnOduCfgRealTxFreqNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the RF Tx frequency. For 6, 7 and 8 bands the Tx frequency resolution is in kHz, for other bands the resolution is in 10kHz. If the Tx frequency value is over 4000000 than the band is identified as 6, 7 or 8G band." ::= { gnOduCfgEntry 8 } gnOduCfgRealRxFreqNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the RF Rx frequency. For 6, 7 and 8 bands the Rx frequency resolution is in kHz, for other bands the resolution is in 10kHz. If the Rx frequency value is over 4000000 than the band is identified as 6, 7 or 8G band." ::= { gnOduCfgEntry 9} gnOduCfgMinTxFreqNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This the Minimum TX frequency that the ODU can receive - Used by the management station." ::= { gnOduCfgEntry 10 } gnOduCfgMaxTxFreqNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This the Maximum TX frequency that the ODU can receive - Used by the management station." ::= { gnOduCfgEntry 11} gnOduCfgMaxTxLevel OBJECT-TYPE SYNTAX INTEGER (0..99) ACCESS read-only STATUS mandatory DESCRIPTION "This is the theoretical maximum level that this ODU unit can transmit." ::= { gnOduCfgEntry 12 } gnOduCfgRefRsl OBJECT-TYPE SYNTAX INTEGER (-70..-30) ACCESS read-write STATUS mandatory DESCRIPTION "This is the received level reference, applicable when utilizing ATPC mode; displayed in dBm." ::= { gnOduCfgEntry 13 } gnOduCfgForceRmtMuteTx OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } ACCESS read-write STATUS mandatory DESCRIPTION "When on, this parameter force the transmitter to be in mute state. (Mute on -> don't transmit) " DEFVAL { off } ::= { gnOduCfgEntry 14 } gnOduCfgForceRmtMaxTx OBJECT-TYPE SYNTAX INTEGER (-50..30) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter force the transmitter output power level of the signal transmitted by the radio. " ::= { gnOduCfgEntry 15 } gnOduCfgTLPerfMonThresh1 OBJECT-TYPE SYNTAX INTEGER (-10..25) ACCESS read-write STATUS mandatory DESCRIPTION "When the Transmitted Level (TL) exceeds this threshold a performance monitoring TL1 counter increments." DEFVAL { 25 } ::= { gnOduCfgEntry 16} gnOduCfgMinRxFreqNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This the Minimum RX frequency that the ODU can receive - Used by the management station." ::= { gnOduCfgEntry 17 } gnOduCfgMaxRxFreqNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This the Maximum RX frequency that the ODU can receive - Used by the management station." ::= { gnOduCfgEntry 18} gnOduCfgOduLoopSupport OBJECT-TYPE SYNTAX INTEGER { notSupported(2), supported(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication for loopback support by the connected ODU." ::= { gnOduCfgEntry 19} gnOduCfgOduModel OBJECT-TYPE SYNTAX INTEGER { unknown(2), v2(3), --phos v1(4) } ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { gnOduCfgEntry 20} gnOduCfgFreqPlanStandard OBJECT-TYPE SYNTAX DisplayString (SIZE(0..45)) ACCESS read-write STATUS mandatory DESCRIPTION "For the NMS use." ::= { gnOduCfgEntry 21} gnOduCfgFreqDevider OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number with which we should divide the MIB Freq value to get to the actual Freq (100 or 1000) " ::= { gnOduCfgEntry 22} -- RO parameters described the state of the ODU. gnOduStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the status of the Outdoor unit of the system." ::= { gnODU 2 } gnOduStatusEntry OBJECT-TYPE SYNTAX GnOduStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the ODU Status Table. This table contains two rows, indexed by ifIndex= 1 for local ODU and ifIndex = 101 for remote ODU." INDEX { ifIndex } ::= { gnOduStatusTable 1 } GnOduStatusEntry ::= SEQUENCE { gnOduStatusCelsiusTemp INTEGER, gnOduStatusFahrenheitTemp INTEGER, gnOduStatusTransmitLevel INTEGER, gnOduStatusReceiveLevel INTEGER, gnOduStatusSynthesizerVCOLock OCTET STRING, gnOduStatusPowerSupply OCTET STRING, gnOduStatusClearLoopTimer INTEGER } gnOduStatusCelsiusTemp OBJECT-TYPE SYNTAX INTEGER (-50..80) ACCESS read-only STATUS mandatory DESCRIPTION "This is the temperature of the ODU in degrees Celsius." ::= { gnOduStatusEntry 1 } gnOduStatusFahrenheitTemp OBJECT-TYPE SYNTAX INTEGER (-58..176) ACCESS read-only STATUS mandatory DESCRIPTION "This is the temperature of the ODU in degrees Fahrenheit." ::= { gnOduStatusEntry 2 } gnOduStatusTransmitLevel OBJECT-TYPE SYNTAX INTEGER (-99..30) ACCESS read-only STATUS mandatory DESCRIPTION "This is the transmit level of the signal transmitted by the radios transmitter, displayed in DBM." ::= { gnOduStatusEntry 3 } gnOduStatusReceiveLevel OBJECT-TYPE SYNTAX INTEGER (-99..-15) ACCESS read-only STATUS mandatory DESCRIPTION "This is the receive level of the signal transmitted by the radios transmitter, displayed in DBM." ::= { gnOduStatusEntry 4} gnOduStatusSynthesizerVCOLock OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This octet represents the ODU status as follows (bit 1, LSB): bit 1 on = TX IF synthesizer bit 2 on = RX IF synthesizer bit 3 on = Xband synthesizer bit 4 on = History TX IF synthesizer bit 5 on = History RX IF synthesizer bit 6 on = History Xband synthesizer " ::= { gnOduStatusEntry 5} gnOduStatusPowerSupply OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This octet represents the status of the power supplies of the ODU: bit 1 on = +5V faulty bit 2 on = +8V faulty bit 3 on = +12V faulty bit 4 on = -12V faulty." ::= { gnOduStatusEntry 6} gnOduStatusClearLoopTimer OBJECT-TYPE SYNTAX INTEGER (0..1440) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the remaining time (in minutes) till the relevant odu loopback timer will be expired. when starting a loopback and the value of gnGenCfgClearLoopTimeout is x, the gnOduStatusClearLoopTimer will be also x, after one minute it will be x-1, etc." ::= { gnOduStatusEntry 7} -- This part of the MIB deals with the performance monitoring -- of the ODU part of the system. gnOduMonitor OBJECT IDENTIFIER ::= { gnODU 3 } -- This part is built according the habits in the telcos/datacom community. -- There are three tables: -- gnOduMonCurrTable that keeps the counters of the current 15 min interval. -- gnOduMonIntervalTable that keeps the counters of the past 96 intervals. -- gnOduMonDayTable that keeps the counters of the past 30 days. gnOduMonCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of the current 15 min interval." ::= { gnOduMonitor 1 } gnOduMonCurrEntry OBJECT-TYPE SYNTAX GnOduMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Current Interval Table. This table contains two rows, indexed by ifIndex= 1 for local ODU and ifIndex = 101 for remote ODU." INDEX { ifIndex } ::= { gnOduMonCurrTable 1 } GnOduMonCurrEntry ::= SEQUENCE { gnOduMonCurrMinRL INTEGER, gnOduMonCurrMaxRL INTEGER, gnOduMonCurrTLThresh1Exceed Counter, gnOduMonCurrRLThresh1Exceed Counter, gnOduMonCurrRLThresh2Exceed Counter, gnOduMonCurrDayMinRL INTEGER, gnOduMonCurrDayMaxRL INTEGER, gnOduMonCurrDayTLThresh1Exceed Counter, gnOduMonCurrDayRLThresh1Exceed Counter, gnOduMonCurrDayRLThresh2Exceed Counter, gnOduMonCurrMinTL INTEGER, gnOduMonCurrMaxTL INTEGER, gnOduMonCurrDayMinTL INTEGER, gnOduMonCurrDayMaxTL INTEGER } gnOduMonCurrMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum received signal level (RL) in the current 15 minute interval. (in DBM) " ::= { gnOduMonCurrEntry 1 } gnOduMonCurrMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum received signal level (RL) in the current 15 minute interval. (in DBM). " ::= { gnOduMonCurrEntry 2 } gnOduMonCurrTLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds TL exceeded the TL1 threshold in the last 15 minutes." ::= { gnOduMonCurrEntry 3 } gnOduMonCurrRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in the last 15 minutes." ::= { gnOduMonCurrEntry 4 } gnOduMonCurrRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in the last 15 minutes." ::= { gnOduMonCurrEntry 5 } gnOduMonCurrDayMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Receive Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrEntry 6} gnOduMonCurrDayMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Receive Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrEntry 7} gnOduMonCurrDayTLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds TL exceeded the TL1 threshold in the last 24 hours." ::= { gnOduMonCurrEntry 8} gnOduMonCurrDayRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in the last 24 hours." ::= { gnOduMonCurrEntry 9 } gnOduMonCurrDayRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in the last 24 hours." ::= { gnOduMonCurrEntry 10 } gnOduMonCurrMinTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum transmitted signal level (TL) in the current 15 minute interval. (in DBM) " ::= { gnOduMonCurrEntry 11 } gnOduMonCurrMaxTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum transmitted signal level (TL) in the current 15 minute interval. (in DBM). " ::= { gnOduMonCurrEntry 12 } gnOduMonCurrDayMinTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Transmitted Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrEntry 13} gnOduMonCurrDayMaxTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Transmitted Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrEntry 14} gnOduMonIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of the 96 last intervals of 15 min." ::= { gnOduMonitor 2 } gnOduMonIntervalEntry OBJECT-TYPE SYNTAX GnOduMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Interval Table. This table is indexed by ifIndex= 1 for local ODU and ifIndex = 101 for remote ODU and by interval idx" INDEX { ifIndex, gnOduMonIntervalIdx } ::= { gnOduMonIntervalTable 1 } GnOduMonIntervalEntry ::= SEQUENCE { gnOduMonIntervalIdx INTEGER, gnOduMonIntervalMinRL INTEGER, gnOduMonIntervalMaxRL INTEGER, gnOduMonIntervalTLThresh1Exceed Counter, gnOduMonIntervalEvent OCTET STRING, gnOduMonIntervalRLThresh1Exceed Counter, gnOduMonIntervalRLThresh2Exceed Counter, gnOduMonIntervalMinTL INTEGER, gnOduMonIntervalMaxTL INTEGER } gnOduMonIntervalIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION " The interval number to which this row is related. " ::= { gnOduMonIntervalEntry 1 } gnOduMonIntervalMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum RL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalEntry 2 } gnOduMonIntervalMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum RL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalEntry 3 } gnOduMonIntervalTLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds TL exceeded the TL1 threshold in a 15 minutes interval." ::= { gnOduMonIntervalEntry 4 } gnOduMonIntervalEvent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION " Events bit 1 = CommDisc. bit 2 = CommCon bit 3 = ATPC2Max. bit 4 = ATPC2Norm. Included for future development, not currently supported." ::= { gnOduMonIntervalEntry 5 } gnOduMonIntervalRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in a 15 minutes interval." ::= { gnOduMonIntervalEntry 6 } gnOduMonIntervalRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in a 15 minutes interval." ::= { gnOduMonIntervalEntry 7 } gnOduMonIntervalMinTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum TL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalEntry 8 } gnOduMonIntervalMaxTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum TL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalEntry 9 } gnOduMonDayTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of 96 intervals of 15 min." ::= { gnOduMonitor 3 } gnOduMonDayEntry OBJECT-TYPE SYNTAX GnOduMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Days Table. This table is indexed by ifIndex= 1 for local ODU and ifIndex = 101 for remote ODU and by day idx. gnOduMonDayIdx = 1 is one day from now, gnOduMonDayIdx = 2 is two days from now, and so on..." INDEX { ifIndex, gnOduMonDayIdx } ::= { gnOduMonDayTable 1 } GnOduMonDayEntry ::= SEQUENCE { gnOduMonDayIdx INTEGER, gnOduMonDayMinRL INTEGER, gnOduMonDayMaxRL INTEGER, gnOduMonDayTLThresh1Exceed Counter, gnOduMonDayRLThresh1Exceed Counter, gnOduMonDayRLThresh2Exceed Counter, gnOduMonDayMinTL INTEGER, gnOduMonDayMaxTL INTEGER } gnOduMonDayIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION " The interval number to which this row is related. " ::= { gnOduMonDayEntry 1 } gnOduMonDayMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Receive Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayEntry 2} gnOduMonDayMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Receive Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayEntry 3} gnOduMonDayTLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds TL exceeded the TL1 threshold in a 24 hour interval." ::= { gnOduMonDayEntry 4} gnOduMonDayRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in a 24 hour interval." ::= { gnOduMonDayEntry 5} gnOduMonDayRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in a 24 hour interval." ::= { gnOduMonDayEntry 6} gnOduMonDayMinTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Transmit Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayEntry 7} gnOduMonDayMaxTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Transmit Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayEntry 8} gnOduCfgXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduCfgXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the Outdoor part of the system." ::= { gnODU 4 } gnOduCfgXEntry OBJECT-TYPE SYNTAX GnOduCfgXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the ODU Configuration Table. This table contains two rows, indexed by gnOduCfgXId= 3 for drawer1 ODU and gnOduCfgXId = 4 for drawer2 ODU." INDEX { gnOduCfgXId } ::= { gnOduCfgXTable 1 } GnOduCfgXEntry ::= SEQUENCE { gnOduCfgXId INTEGER, gnOduCfgXTxFreqNumLocalRemote INTEGER, gnOduCfgXRLPerfMonThresh1 INTEGER, gnOduCfgXRLPerfMonThresh2 INTEGER, gnOduCfgXATPCStatus INTEGER, gnOduCfgXMUTEStatus INTEGER, gnOduCfgXAntennaType INTEGER, gnOduCfgXTransmitLevel INTEGER, gnOduCfgXRealTxFreqNumber INTEGER, gnOduCfgXRealRxFreqNumber INTEGER, gnOduCfgXMinTxFreqNumber INTEGER, gnOduCfgXMaxTxFreqNumber INTEGER, gnOduCfgXMaxTxLevel INTEGER, gnOduCfgXRefRsl INTEGER, gnOduCfgXForceRmtMuteTx INTEGER, gnOduCfgXForceRmtMaxTx INTEGER, gnOduCfgXTLPerfMonThresh1 INTEGER, gnOduCfgXOperation INTEGER, gnOduCfgXODUSerialNumber DisplayString, gnOduCfgXChannelBandwidth INTEGER, gnOduCfgXMinRxFreqNumber INTEGER, gnOduCfgXMaxRxFreqNumber INTEGER, gnOduCfgXRxFreqNumLocalRemote INTEGER, gnOduCfgXOduLoopSupport INTEGER, gnOduCfgXOduModel INTEGER, gnOduCfgXFreqPlanStandard DisplayString, gnOduCfgXFreqDevider INTEGER, gnOduCfgXLoopbackOption INTEGER, gnOduCfgXxpicClockMode INTEGER, gnOduCfgXUnfadedReferenceRsl INTEGER, gnOduCfgXRfuMode INTEGER, gnOduCfgXRslRouteToConnector INTEGER, gnOduCfgXDelayCalibrationOperation INTEGER, gnOduCfgXDelayCalibrationValue INTEGER, gnOduCfgXDelayCalibrationWgType DisplayString, gnOduCfgXOduLog INTEGER, gnOduCfgXOduLogPeriod INTEGER, gnOduCfgXXpiPerfMonThresh INTEGER } gnOduCfgXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnOduCfgXEntry 1 } gnOduCfgXTxFreqNumLocalRemote OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the radio transmit frequency, displayed in 1/100 MHz. WRITE changes the local and remote sides. Only for systems that support frequency configuration (Not channel)." ::= { gnOduCfgXEntry 2} gnOduCfgXRLPerfMonThresh1 OBJECT-TYPE SYNTAX INTEGER (-75..-15) ACCESS read-write STATUS mandatory DESCRIPTION "When the Received Level (RL) exceeds this threshold a performance monitoring RL1 counter increments." DEFVAL { -50} ::= { gnOduCfgXEntry 3} gnOduCfgXRLPerfMonThresh2 OBJECT-TYPE SYNTAX INTEGER (-75..-15) ACCESS read-write STATUS mandatory DESCRIPTION "When the Received Level (RL) exceeds this threshold a performance monitoring RL2 counter increments." DEFVAL { -70} ::= { gnOduCfgXEntry 4} gnOduCfgXATPCStatus OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates if the ATPC option is enabled or disabled." DEFVAL { on} ::= { gnOduCfgXEntry 5} gnOduCfgXMUTEStatus OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates if transmitter will be in mute state. (Mute on -> don't transmit) " DEFVAL { off} ::= { gnOduCfgXEntry 6 } gnOduCfgXAntennaType OBJECT-TYPE SYNTAX INTEGER { oneFoot(2), twoFeet(3), threeFeet(4), fourFeet(5), sixFeet(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the size of the antenna used in the ODU. This attribute will not auto-detect the antenna size. It is used for the unfaded RSL calculation feature included in the element manager." DEFVAL { oneFoot } ::= { gnOduCfgXEntry 7 } gnOduCfgXTransmitLevel OBJECT-TYPE SYNTAX INTEGER (-50..34) ACCESS read-write STATUS mandatory DESCRIPTION "This is the transmitter output power level of the signal transmitted by the radios, displayed in DBM. " ::= { gnOduCfgXEntry 8 } gnOduCfgXRealTxFreqNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the RF Tx frequency. For 6, 7 and 8 bands the Tx frequency resolution is in kHz, for other bands the resolution is in 10kHz. If the Tx frequency value is over 4000000 than the band is identified as 6, 7 or 8G band." ::= { gnOduCfgXEntry 9 } gnOduCfgXRealRxFreqNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the RF Rx frequency. For 6, 7 and 8 bands the Rx frequency resolution is in kHz, for other bands the resolution is in 10kHz. If the Rx frequency value is over 4000000 than the band is identified as 6, 7 or 8G band." ::= { gnOduCfgXEntry 10} gnOduCfgXMinTxFreqNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This the Minimum TX frequency that the ODU can receive - Used by the management station." ::= { gnOduCfgXEntry 11 } gnOduCfgXMaxTxFreqNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This the Maximum TX frequency that the ODU can receive - Used by the management station." ::= { gnOduCfgXEntry 12} gnOduCfgXMaxTxLevel OBJECT-TYPE SYNTAX INTEGER (0..99) ACCESS read-only STATUS mandatory DESCRIPTION "This is the theoretical maximum level that this ODU unit can transmit." ::= { gnOduCfgXEntry 13 } gnOduCfgXRefRsl OBJECT-TYPE SYNTAX INTEGER (-70..-30) ACCESS read-write STATUS mandatory DESCRIPTION "This is the received level reference, applicable when utilizing ATPC mode; displayed in dBm." ::= { gnOduCfgXEntry 14 } gnOduCfgXForceRmtMuteTx OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } ACCESS read-write STATUS mandatory DESCRIPTION "When on, this parameter force the transmitter to be in mute state. (Mute on -> don't transmit) " DEFVAL { off } ::= { gnOduCfgXEntry 15 } gnOduCfgXForceRmtMaxTx OBJECT-TYPE SYNTAX INTEGER (-50..30) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter force the transmitter output power level of the signal transmitted by the radio. " ::= { gnOduCfgXEntry 16 } gnOduCfgXTLPerfMonThresh1 OBJECT-TYPE SYNTAX INTEGER (-10..25) ACCESS read-write STATUS mandatory DESCRIPTION "When the Transmitted Level (TL) exceeds this threshold a performance monitoring TL1 counter increments." DEFVAL { 25 } ::= { gnOduCfgXEntry 17 } gnOduCfgXOperation OBJECT-TYPE SYNTAX INTEGER { noOperation(2), setOduDefaultConf(3), resetODU(4), swResetODU(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows to perform ODU operations. (3) will SET all ODU default configurations. (4) will implement ODU reset." DEFVAL { noOperation } ::= { gnOduCfgXEntry 18 } gnOduCfgXODUSerialNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODU serial number - up to 20 characters " ::= { gnOduCfgXEntry 19 } gnOduCfgXChannelBandwidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The TX channel bandwidth, displayed in 1/100 MHz. For example: An STM-1 ETSI TX channel bandwidth of 56MHz is displayed as the value 5600." ::= { gnOduCfgXEntry 20 } gnOduCfgXMinRxFreqNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This the Minimum RX frequency that the ODU can receive - Used by the management station." ::= { gnOduCfgXEntry 21 } gnOduCfgXMaxRxFreqNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This the Maximum RX frequency that the ODU can receive - Used by the management station." ::= { gnOduCfgXEntry 22} gnOduCfgXRxFreqNumLocalRemote OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the radio transmit frequency, displayed in 1/100 MHz. WRITE changes the local and remote sides. Only for systems that support frequency configuration (Not channel)." ::= { gnOduCfgXEntry 23} gnOduCfgXOduLoopSupport OBJECT-TYPE SYNTAX INTEGER { notSupported(2), supported(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Inidcation for loopback support by the connected ODU." ::= { gnOduCfgXEntry 24} gnOduCfgXOduModel OBJECT-TYPE SYNTAX INTEGER { unknown(2), v2(3), -- Phos ODU v1(4), -- Fibe ODU v3(5), -- Titan ODU v4(6), -- Vanad RFU v5(7), -- Ippon SP RFU v6(8), -- Ippon HP RFU v7(9), -- Ippon Hittite SP RFU v8(10), -- Ippon Hittite HP RFU v9(11) -- Vanad Wide RFU } ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { gnOduCfgXEntry 25} gnOduCfgXFreqPlanStandard OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "For the NMS use." ::= { gnOduCfgXEntry 26} gnOduCfgXFreqDevider OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number with which we should divide the MIB Freq value to get to the actual Freq (100 or 1000) " ::= { gnOduCfgXEntry 27} gnOduCfgXLoopbackOption OBJECT-TYPE SYNTAX INTEGER { noloopback(2), interfaceInterLoop(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter enable the user to activate an ODU loopback ." DEFVAL { noloopback } ::= { gnOduCfgXEntry 28 } gnOduCfgXxpicClockMode OBJECT-TYPE SYNTAX INTEGER { standAlone(2), masterClock(3), slaveClock(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the status of the xpic clock mode." ::= { gnOduCfgXEntry 29 } gnOduCfgXUnfadedReferenceRsl OBJECT-TYPE SYNTAX INTEGER (-70..-15) ACCESS read-write STATUS mandatory DESCRIPTION "This is used for the unfaded RSL calculation feature included in the element manager." DEFVAL { -70 } ::= { gnOduCfgXEntry 30 } gnOduCfgXRfuMode OBJECT-TYPE SYNTAX INTEGER { main(2), diversity(3), combined(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The RX mode of operation." DEFVAL {main } ::= { gnOduCfgXEntry 31 } gnOduCfgXRslRouteToConnector OBJECT-TYPE SYNTAX INTEGER { main(2), diversity(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Choose the receive level signal for the RSL connector." DEFVAL {main } ::= { gnOduCfgXEntry 32 } gnOduCfgXDelayCalibrationOperation OBJECT-TYPE SYNTAX INTEGER { noAction(2), activate(3), error(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter enables launching a delay calibration parameters calculation." DEFVAL {noAction } ::= { gnOduCfgXEntry 33 } gnOduCfgXDelayCalibrationValue OBJECT-TYPE SYNTAX INTEGER (-130..130) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the delay calibration result and delay calibration override value. values are between -130 to 130." ::= { gnOduCfgXEntry 34 } gnOduCfgXDelayCalibrationWgType OBJECT-TYPE SYNTAX DisplayString (SIZE(0..45)) ACCESS read-write STATUS mandatory DESCRIPTION "Delay Calibration WG Type For the NMS use." ::= { gnOduCfgXEntry 35 } gnOduCfgXOduLog OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter enable the user to activate ODU log." ::= { gnOduCfgXEntry 36 } gnOduCfgXOduLogPeriod OBJECT-TYPE SYNTAX INTEGER (1..600) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter enable the user to chose the log peroid (in sec)." ::= { gnOduCfgXEntry 37 } gnOduCfgXXpiPerfMonThresh OBJECT-TYPE SYNTAX INTEGER (10..30) ACCESS read-write STATUS mandatory DESCRIPTION "When the Received XPI beneath this threshold a performance monitoring XPI counter increments (future develope)." DEFVAL {20} ::= { gnOduCfgXEntry 38} -- RO parameters described the state of the ODU. gnOduStatusXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduStatusXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the status of the Outdoor unit of the system." ::= { gnODU 5 } gnOduStatusXEntry OBJECT-TYPE SYNTAX GnOduStatusXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the ODU Status Table. This table contains two rows, indexed by gnOduStatusXId= 3 for drawer1 ODU and gnOduStatusXId = 4 for drawer2 ODU." INDEX { gnOduStatusXId } ::= { gnOduStatusXTable 1 } GnOduStatusXEntry ::= SEQUENCE { gnOduStatusXId INTEGER, gnOduStatusXCelsiusTemp INTEGER, gnOduStatusXFahrenheitTemp INTEGER, gnOduStatusXTransmitLevel INTEGER, gnOduStatusXReceiveLevel INTEGER, gnOduStatusXSynthesizerVCOLock OCTET STRING, gnOduStatusXPowerSupply OCTET STRING, gnOduStatusXIfcSupported INTEGER, gnOduStatusXRslDiversity INTEGER, gnOduStatusXRslCombined INTEGER, gnOduStatusXRfuAddress INTEGER, gnOduStatusXMinTransmitLevel INTEGER, gnOduStatusXOduSWVer DisplayString, gnOduStatusXOduSWPostVer DisplayString, gnOduStatusXRfuFwVer DisplayString, gnOduStatusXValidIntervals INTEGER } gnOduStatusXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnOduStatusXEntry 1 } gnOduStatusXCelsiusTemp OBJECT-TYPE SYNTAX INTEGER (-70..80) ACCESS read-only STATUS mandatory DESCRIPTION "This is the temperature of the ODU in degrees Celsius." ::= { gnOduStatusXEntry 2 } gnOduStatusXFahrenheitTemp OBJECT-TYPE SYNTAX INTEGER (-58..176) ACCESS read-only STATUS mandatory DESCRIPTION "This is the temperature of the ODU in degrees Fahrenheit." ::= { gnOduStatusXEntry 3 } gnOduStatusXTransmitLevel OBJECT-TYPE SYNTAX INTEGER (-99..34) ACCESS read-only STATUS mandatory DESCRIPTION "This is the transmit level of the signal transmitted by the radios transmitter, displayed in DBM." ::= { gnOduStatusXEntry 4 } gnOduStatusXReceiveLevel OBJECT-TYPE SYNTAX INTEGER (-99..-15) ACCESS read-only STATUS mandatory DESCRIPTION "This is the receive level of the signal transmitted by the radios transmitter, displayed in DBM." ::= { gnOduStatusXEntry 5} gnOduStatusXSynthesizerVCOLock OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This octet represents the ODU status as follows (bit 1, LSB): bit 1 on = TX IF synthesizer bit 2 on = RX IF synthesizer bit 3 on = Xband synthesizer bit 4 on = History TX IF synthesizer bit 5 on = History RX IF synthesizer bit 6 on = History Xband synthesizer " ::= { gnOduStatusXEntry 6} gnOduStatusXPowerSupply OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This octet represents the status of the power supplies of the ODU: bit 1 on = +5V faulty bit 2 on = +8V faulty bit 3 on = +12V faulty bit 4 on = -12V faulty." ::= { gnOduStatusXEntry 7} gnOduStatusXIfcSupported OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication for IFC support." ::= { gnOduStatusXEntry 8} gnOduStatusXRslDiversity OBJECT-TYPE SYNTAX INTEGER (-99..0) ACCESS read-only STATUS mandatory DESCRIPTION "This is the receive level of the space diversity signal, displayed in DBM." ::= { gnOduStatusXEntry 9} gnOduStatusXRslCombined OBJECT-TYPE SYNTAX INTEGER (-99..0) ACCESS read-only STATUS mandatory DESCRIPTION "This is the receive level of the combined signal, displayed in DBM." ::= { gnOduStatusXEntry 10 } gnOduStatusXRfuAddress OBJECT-TYPE SYNTAX INTEGER (0..31) ACCESS read-only STATUS mandatory DESCRIPTION "The RFU Address." ::= { gnOduStatusXEntry 11 } gnOduStatusXMinTransmitLevel OBJECT-TYPE SYNTAX INTEGER (-50..34) ACCESS read-only STATUS mandatory DESCRIPTION "This is the minimum transmit level of the signal transmitted by the radios transmitter, displayed in DBM.. (for RFU unit only)" ::= { gnOduStatusXEntry 12 } gnOduStatusXOduSWVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODU software version." ::= { gnOduStatusXEntry 13 } gnOduStatusXOduSWPostVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ODU post reset software version." ::= { gnOduStatusXEntry 14 } gnOduStatusXRfuFwVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the RFU FW version." ::= { gnOduStatusXEntry 15 } gnOduStatusXValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous valid intervals for which valid data has been stored for the specific ODU." ::= { gnOduStatusXEntry 16 } -- This part of the MIB deals with the performance monitoring -- of the ODU part of the system. -- This part is built according the habits in the telcos/datacom community. -- There are three tables: -- gnOduMonCurrXTable that keeps the counters of the current 15 min interval. -- gnOduMonIntervalXTable that keeps the counters of the past 96 intervals. -- gnOduMonDayXTable that keeps the counters of the past 30 days. gnOduMonitorX OBJECT IDENTIFIER ::= { gnODU 6 } gnOduMonCurrXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonCurrXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of the current 15 min interval." ::= { gnOduMonitorX 1 } gnOduMonCurrXEntry OBJECT-TYPE SYNTAX GnOduMonCurrXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Current Interval Table. This table contains two rows, indexed by gnOduMonCurrXId= 3 for drawer1 ODU and gnOduMonCurrXId = 4 for drawer2 ODU." INDEX { gnOduMonCurrXId } ::= { gnOduMonCurrXTable 1 } GnOduMonCurrXEntry ::= SEQUENCE { gnOduMonCurrXId INTEGER, gnOduMonCurrXMinRL INTEGER, gnOduMonCurrXMaxRL INTEGER, gnOduMonCurrXTLThresh1Exceed Counter, gnOduMonCurrXRLThresh1Exceed Counter, gnOduMonCurrXRLThresh2Exceed Counter, gnOduMonCurrXDayMinRL INTEGER, gnOduMonCurrXDayMaxRL INTEGER, gnOduMonCurrXDayTLThresh1Exceed Counter, gnOduMonCurrXDayRLThresh1Exceed Counter, gnOduMonCurrXDayRLThresh2Exceed Counter, gnOduMonCurrXMinTL INTEGER, gnOduMonCurrXMaxTL INTEGER, gnOduMonCurrXDayMinTL INTEGER, gnOduMonCurrXDayMaxTL INTEGER, gnOduMonCurrXXpi INTEGER, gnOduMonCurrXMinXpi INTEGER, gnOduMonCurrXMaxXpi INTEGER, gnOduMonCurrXDayMinXpi INTEGER, gnOduMonCurrXDayMaxXpi INTEGER, gnOduMonCurrXXpiThreshExceed Counter, gnOduMonCurrXDayXpiThreshExceed Counter, gnOduMonCurrXMse INTEGER, gnOduMonCurrXLastDayIDF INTEGER } gnOduMonCurrXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnOduMonCurrXEntry 1 } gnOduMonCurrXMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum received signal level (RL) in the current 15 minute interval. (in DBM) " ::= { gnOduMonCurrXEntry 2 } gnOduMonCurrXMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum received signal level (RL) in the current 15 minute interval. (in DBM). " ::= { gnOduMonCurrXEntry 3 } gnOduMonCurrXTLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds TL exceeded the TL1 threshold in the last 15 minutes." ::= { gnOduMonCurrXEntry 4 } gnOduMonCurrXRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in the last 15 minutes." ::= { gnOduMonCurrXEntry 5 } gnOduMonCurrXRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in the last 15 minutes." ::= { gnOduMonCurrXEntry 6 } gnOduMonCurrXDayMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Receive Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrXEntry 7} gnOduMonCurrXDayMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Receive Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrXEntry 8} gnOduMonCurrXDayTLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds TL exceeded the TL1 threshold in the last 24 hours." ::= { gnOduMonCurrXEntry 9} gnOduMonCurrXDayRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in the last 24 hours." ::= { gnOduMonCurrXEntry 10 } gnOduMonCurrXDayRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in the last 24 hours." ::= { gnOduMonCurrXEntry 11 } gnOduMonCurrXMinTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum transmitted signal level (TL) in the current 15 minute interval. (in DBM) " ::= { gnOduMonCurrXEntry 12 } gnOduMonCurrXMaxTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum transmitted signal level (TL) in the current 15 minute interval. (in DBM). " ::= { gnOduMonCurrXEntry 13 } gnOduMonCurrXDayMinTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Transmitted Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrXEntry 14} gnOduMonCurrXDayMaxTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Transmitted Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrXEntry 15} gnOduMonCurrXXpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Current XPI level (in [DBM/100]). For [DBM] level divide by 100." ::= { gnOduMonCurrXEntry 16} gnOduMonCurrXMinXpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum XPI Level (in [DBM/100]). in the last 15 minute (future develope). For [DBM] level divide by 100." ::= { gnOduMonCurrXEntry 17} gnOduMonCurrXMaxXpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum XPI Level (in [DBM/100]). in the last 15 minute (future develope). For [DBM] level divide by 100." ::= { gnOduMonCurrXEntry 18} gnOduMonCurrXDayMinXpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum XPI Level (in [DBM/100]). in the last 24 hours (future develope). For [DBM] level divide by 100." ::= { gnOduMonCurrXEntry 19} gnOduMonCurrXDayMaxXpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum XPI Level (in [DBM/100]). in the last 24 hours (future develope). For [DBM] level divide by 100." ::= { gnOduMonCurrXEntry 20} gnOduMonCurrXXpiThreshExceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds XPI beneath the XPI threshold in the last 15 minutes (future develope)." ::= { gnOduMonCurrXEntry 21 } gnOduMonCurrXDayXpiThreshExceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds XPI beneath the XPI threshold in the last 24 hours (future develope)." ::= { gnOduMonCurrXEntry 22} gnOduMonCurrXMse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Current MSE level (in [DBM/100]). For [DBM] level divide by 100." ::= { gnOduMonCurrXEntry 23} gnOduMonCurrXLastDayIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnOduMonCurrXEntry 24 } gnOduMonIntervalXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonIntervalXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of the 96 last intervals of 15 min." ::= { gnOduMonitorX 2 } gnOduMonIntervalXEntry OBJECT-TYPE SYNTAX GnOduMonIntervalXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Interval Table. This table is indexed by gnOduMonIntervalXId= 3 for drawer1 ODU and gnOduMonIntervalXId = 4 for drawer2 ODU and by interval idx" INDEX { gnOduMonIntervalXId, gnOduMonIntervalXIdx } ::= { gnOduMonIntervalXTable 1 } GnOduMonIntervalXEntry ::= SEQUENCE { gnOduMonIntervalXId INTEGER, gnOduMonIntervalXIdx INTEGER, gnOduMonIntervalXMinRL INTEGER, gnOduMonIntervalXMaxRL INTEGER, gnOduMonIntervalXTLThresh1Exceed Counter, gnOduMonIntervalXEvent OCTET STRING, gnOduMonIntervalXRLThresh1Exceed Counter, gnOduMonIntervalXRLThresh2Exceed Counter, gnOduMonIntervalXMinTL INTEGER, gnOduMonIntervalXMaxTL INTEGER, gnOduMonIntervalXMinXpi INTEGER, gnOduMonIntervalXMaxXpi INTEGER, gnOduMonIntervalXXpiThreshExceed Counter, gnOduMonIntervalXIDF INTEGER } gnOduMonIntervalXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnOduMonIntervalXEntry 1 } gnOduMonIntervalXIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION " The interval number to which this row is related. " ::= { gnOduMonIntervalXEntry 2 } gnOduMonIntervalXMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum RL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalXEntry 3 } gnOduMonIntervalXMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum RL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalXEntry 4 } gnOduMonIntervalXTLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds TL exceeded the TL1 threshold in a 15 minutes interval." ::= { gnOduMonIntervalXEntry 5 } gnOduMonIntervalXEvent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION " Events bit 1 = CommDisc. bit 2 = CommCon bit 3 = ATPC2Max. bit 4 = ATPC2Norm. Included for future development, not currently supported." ::= { gnOduMonIntervalXEntry 6 } gnOduMonIntervalXRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in a 15 minutes interval." ::= { gnOduMonIntervalXEntry 7 } gnOduMonIntervalXRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in a 15 minutes interval." ::= { gnOduMonIntervalXEntry 8 } gnOduMonIntervalXMinTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum TL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalXEntry 9 } gnOduMonIntervalXMaxTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum TL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalXEntry 10 } gnOduMonIntervalXMinXpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum XPI level (in [DBM/100]) in a 15 minutes intervalin (future develope). For [DBM] level divide by 100." ::= { gnOduMonIntervalXEntry 11 } gnOduMonIntervalXMaxXpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum XPI level (in [DBM/100]) in a 15 minutes interval (future develope). For [DBM] level divide by 100." ::= { gnOduMonIntervalXEntry 12 } gnOduMonIntervalXXpiThreshExceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds XPI exceeded the XPI threshold in a 15 minutes interval (future develope)." ::= { gnOduMonIntervalXEntry 13 } gnOduMonIntervalXIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnOduMonIntervalXEntry 14 } gnOduMonDayXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonDayXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of 96 intervals of 15 min." ::= { gnOduMonitorX 3 } gnOduMonDayXEntry OBJECT-TYPE SYNTAX GnOduMonDayXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Days Table. This table is indexed by gnOduMonDayXId= 3 for drawer1 ODU and gnOduMonDayXId = 4 for drawer2 ODU and by day idx. gnOduMonDayIdx = 1 is one day from now, gnOduMonDayIdx = 2 is two days from now, and so on..." INDEX { gnOduMonDayXId, gnOduMonDayXIdx } ::= { gnOduMonDayXTable 1 } GnOduMonDayXEntry ::= SEQUENCE { gnOduMonDayXId INTEGER, gnOduMonDayXIdx INTEGER, gnOduMonDayXMinRL INTEGER, gnOduMonDayXMaxRL INTEGER, gnOduMonDayXTLThresh1Exceed Counter, gnOduMonDayXRLThresh1Exceed Counter, gnOduMonDayXRLThresh2Exceed Counter, gnOduMonDayXMinTL INTEGER, gnOduMonDayXMaxTL INTEGER, gnOduMonDayXMinXpi INTEGER, gnOduMonDayXMaxXpi INTEGER, gnOduMonDayXXpiThreshExceed Counter, gnOduMonDayXIDF INTEGER } gnOduMonDayXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnOduMonDayXEntry 1 } gnOduMonDayXIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION " The interval number to which this row is related. " ::= { gnOduMonDayXEntry 2 } gnOduMonDayXMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Receive Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayXEntry 3} gnOduMonDayXMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Receive Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayXEntry 4} gnOduMonDayXTLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds TL exceeded the TL1 threshold in a 24 hour interval." ::= { gnOduMonDayXEntry 5} gnOduMonDayXRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in a 24 hour interval." ::= { gnOduMonDayXEntry 6} gnOduMonDayXRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in a 24 hour interval." ::= { gnOduMonDayXEntry 7} gnOduMonDayXMinTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Transmit Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayXEntry 8} gnOduMonDayXMaxTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Transmit Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayXEntry 9} gnOduMonDayXMinXpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum XPI Level (in [DBM/100]) in a 24 hour interval (future develope). For [DBM] level divide by 100." ::= { gnOduMonDayXEntry 10} gnOduMonDayXMaxXpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum XPI Level (in [DBM/100]) in a 24 hour interval (future develope). For [DBM] level divide by 100." ::= { gnOduMonDayXEntry 11} gnOduMonDayXXpiThreshExceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds XPI exceeded the XPI threshold in a 24 hour interval (future develope)." ::= { gnOduMonDayXEntry 12} gnOduMonDayXIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnOduMonDayXEntry 13 } gnOduMonCurrDiversityXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonCurrDiversityXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of the current 15 min interval." ::= { gnOduMonitorX 4 } gnOduMonCurrDiversityXEntry OBJECT-TYPE SYNTAX GnOduMonCurrDiversityXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Current Interval Table. This table contains two rows, indexed by gnOduMonCurrCombinedXId= 3 for drawer1 ODU and gnOduMonCurrDiversityXId = 4 for drawer2 ODU." INDEX { gnOduMonCurrDiversityXId } ::= { gnOduMonCurrDiversityXTable 1 } GnOduMonCurrDiversityXEntry ::= SEQUENCE { gnOduMonCurrDiversityXId INTEGER, gnOduMonCurrDiversityXMinRL INTEGER, gnOduMonCurrDiversityXMaxRL INTEGER, gnOduMonCurrDiversityXRLThresh1Exceed Counter, gnOduMonCurrDiversityXRLThresh2Exceed Counter, gnOduMonCurrDiversityXDayMinRL INTEGER, gnOduMonCurrDiversityXDayMaxRL INTEGER, gnOduMonCurrDiversityXDayRLThresh1Exceed INTEGER, gnOduMonCurrDiversityXDayRLThresh2Exceed INTEGER } gnOduMonCurrDiversityXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnOduMonCurrDiversityXEntry 1 } gnOduMonCurrDiversityXMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum received signal level (RL) in the current 15 minute interval. (in DBM) " ::= { gnOduMonCurrDiversityXEntry 2 } gnOduMonCurrDiversityXMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum received signal level (RL) in the current 15 minute interval. (in DBM). " ::= { gnOduMonCurrDiversityXEntry 3 } gnOduMonCurrDiversityXRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in the last 15 minutes." ::= { gnOduMonCurrDiversityXEntry 4 } gnOduMonCurrDiversityXRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in the last 15 minutes." ::= { gnOduMonCurrDiversityXEntry 5 } gnOduMonCurrDiversityXDayMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Receive Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrDiversityXEntry 6} gnOduMonCurrDiversityXDayMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Receive Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrDiversityXEntry 7} gnOduMonCurrDiversityXDayRLThresh1Exceed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds Diversity RL exceeded the RL1 threshold in the last 24 hours." ::= { gnOduMonCurrDiversityXEntry 8} gnOduMonCurrDiversityXDayRLThresh2Exceed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds Diversity RL exceeded the RL2 threshold in the last 24 hours." ::= { gnOduMonCurrDiversityXEntry 9} gnOduMonIntervalDiversityXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonIntervalDiversityXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of the 96 last intervals of 15 min." ::= { gnOduMonitorX 5 } gnOduMonIntervalDiversityXEntry OBJECT-TYPE SYNTAX GnOduMonIntervalDiversityXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Interval Table. This table is indexed by gnOduMonIntervalDiversityXId= 3 for drawer1 ODU and gnOduMonIntervalDiversityXId = 4 for drawer2 ODU and by interval idx" INDEX { gnOduMonIntervalDiversityXId, gnOduMonIntervalDiversityXIdx } ::= { gnOduMonIntervalDiversityXTable 1 } GnOduMonIntervalDiversityXEntry ::= SEQUENCE { gnOduMonIntervalDiversityXId INTEGER, gnOduMonIntervalDiversityXIdx INTEGER, gnOduMonIntervalDiversityXMinRL INTEGER, gnOduMonIntervalDiversityXMaxRL INTEGER, gnOduMonIntervalDiversityXRLThresh1Exceed Counter, gnOduMonIntervalDiversityXRLThresh2Exceed Counter } gnOduMonIntervalDiversityXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnOduMonIntervalDiversityXEntry 1 } gnOduMonIntervalDiversityXIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION " The interval number to which this row is related. " ::= { gnOduMonIntervalDiversityXEntry 2 } gnOduMonIntervalDiversityXMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum RL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalDiversityXEntry 3 } gnOduMonIntervalDiversityXMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum RL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalDiversityXEntry 4 } gnOduMonIntervalDiversityXRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in a 15 minutes interval." ::= { gnOduMonIntervalDiversityXEntry 5 } gnOduMonIntervalDiversityXRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in a 15 minutes interval." ::= { gnOduMonIntervalDiversityXEntry 6 } gnOduMonDayDiversityXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonDayDiversityXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of 96 intervals of 15 min." ::= { gnOduMonitorX 6 } gnOduMonDayDiversityXEntry OBJECT-TYPE SYNTAX GnOduMonDayDiversityXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Days Table. This table is indexed by gnOduMonDayDiversityXId= 3 for drawer1 ODU and gnOduMonDayDiversityXId = 4 for drawer2 ODU and by day idx. gnOduMonDayDiversityXIdx = 1 is one day from now, gnOduMonDayDiversityXIdx = 2 is two days from now, and so on..." INDEX { gnOduMonDayDiversityXId, gnOduMonDayDiversityXIdx } ::= { gnOduMonDayDiversityXTable 1 } GnOduMonDayDiversityXEntry ::= SEQUENCE { gnOduMonDayDiversityXId INTEGER, gnOduMonDayDiversityXIdx INTEGER, gnOduMonDayDiversityXMinRL INTEGER, gnOduMonDayDiversityXMaxRL INTEGER, gnOduMonDayDiversityXRLThresh1Exceed Counter, gnOduMonDayDiversityXRLThresh2Exceed Counter } gnOduMonDayDiversityXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnOduMonDayDiversityXEntry 1 } gnOduMonDayDiversityXIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION " The interval number to which this row is related. " ::= { gnOduMonDayDiversityXEntry 2 } gnOduMonDayDiversityXMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Receive Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayDiversityXEntry 3} gnOduMonDayDiversityXMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Receive Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayDiversityXEntry 4} gnOduMonDayDiversityXRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in a 24 hour interval." ::= { gnOduMonDayDiversityXEntry 5} gnOduMonDayDiversityXRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in a 24 hour interval." ::= { gnOduMonDayDiversityXEntry 6} gnOduMonCurrCombinedXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonCurrCombinedXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of the current 15 min interval." ::= { gnOduMonitorX 7 } gnOduMonCurrCombinedXEntry OBJECT-TYPE SYNTAX GnOduMonCurrCombinedXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Current Interval Table. This table contains two rows, indexed by gnOduMonCurrCombinedXId= 3 for drawer1 ODU and gnOduMonCurrCombinedXId = 4 for drawer2 ODU." INDEX { gnOduMonCurrCombinedXId } ::= { gnOduMonCurrCombinedXTable 1 } GnOduMonCurrCombinedXEntry ::= SEQUENCE { gnOduMonCurrCombinedXId INTEGER, gnOduMonCurrCombinedXMinRL INTEGER, gnOduMonCurrCombinedXMaxRL INTEGER, gnOduMonCurrCombinedXRLThresh1Exceed Counter, gnOduMonCurrCombinedXRLThresh2Exceed Counter, gnOduMonCurrCombinedXDayMinRL INTEGER, gnOduMonCurrCombinedXDayMaxRL INTEGER, gnOduMonCurrCombinedXDayRLThresh1Exceed INTEGER, gnOduMonCurrCombinedXDayRLThresh2Exceed INTEGER } gnOduMonCurrCombinedXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnOduMonCurrCombinedXEntry 1 } gnOduMonCurrCombinedXMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum received signal level (RL) in the current 15 minute interval. (in DBM) " ::= { gnOduMonCurrCombinedXEntry 2 } gnOduMonCurrCombinedXMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum received signal level (RL) in the current 15 minute interval. (in DBM). " ::= { gnOduMonCurrCombinedXEntry 3 } gnOduMonCurrCombinedXRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in the last 15 minutes." ::= { gnOduMonCurrCombinedXEntry 4 } gnOduMonCurrCombinedXRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in the last 15 minutes." ::= { gnOduMonCurrCombinedXEntry 5 } gnOduMonCurrCombinedXDayMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Receive Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrCombinedXEntry 6} gnOduMonCurrCombinedXDayMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Receive Level (in DBM). in the last 24 hours." ::= { gnOduMonCurrCombinedXEntry 7} gnOduMonCurrCombinedXDayRLThresh1Exceed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds Combined RL exceeded the RL1 threshold in the last 24 hours." ::= { gnOduMonCurrCombinedXEntry 8} gnOduMonCurrCombinedXDayRLThresh2Exceed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds Combined RL exceeded the RL2 threshold in the last 24 hours." ::= { gnOduMonCurrCombinedXEntry 9} gnOduMonIntervalCombinedXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonIntervalCombinedXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of the 96 last intervals of 15 min." ::= { gnOduMonitorX 8 } gnOduMonIntervalCombinedXEntry OBJECT-TYPE SYNTAX GnOduMonIntervalCombinedXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Interval Table. This table is indexed by gnOduMonIntervalCombinedXId= 3 for drawer1 ODU and gnOduMonIntervalCombinedXId = 4 for drawer2 ODU and by interval idx" INDEX { gnOduMonIntervalCombinedXId, gnOduMonIntervalCombinedXIdx } ::= { gnOduMonIntervalCombinedXTable 1 } GnOduMonIntervalCombinedXEntry ::= SEQUENCE { gnOduMonIntervalCombinedXId INTEGER, gnOduMonIntervalCombinedXIdx INTEGER, gnOduMonIntervalCombinedXMinRL INTEGER, gnOduMonIntervalCombinedXMaxRL INTEGER, gnOduMonIntervalCombinedXRLThresh1Exceed Counter, gnOduMonIntervalCombinedXRLThresh2Exceed Counter } gnOduMonIntervalCombinedXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnOduMonIntervalCombinedXEntry 1 } gnOduMonIntervalCombinedXIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION " The interval number to which this row is related. " ::= { gnOduMonIntervalCombinedXEntry 2 } gnOduMonIntervalCombinedXMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum RL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalCombinedXEntry 3 } gnOduMonIntervalCombinedXMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum RL in a 15 minutes interval. (in DBM). " ::= { gnOduMonIntervalCombinedXEntry 4 } gnOduMonIntervalCombinedXRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in a 15 minutes interval." ::= { gnOduMonIntervalCombinedXEntry 5 } gnOduMonIntervalCombinedXRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in a 15 minutes interval." ::= { gnOduMonIntervalCombinedXEntry 6 } gnOduMonDayCombinedXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnOduMonDayCombinedXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of 96 intervals of 15 min." ::= { gnOduMonitorX 9 } gnOduMonDayCombinedXEntry OBJECT-TYPE SYNTAX GnOduMonDayCombinedXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Days Table. This table is indexed by gnOduMonDayDiversityXId= 3 for drawer1 ODU and gnOduMonDayCombinedXId = 4 for drawer2 ODU and by day idx. gnOduMonDayCombinedXIdx = 1 is one day from now, gnOduMonDayCombinedXIdx = 2 is two days from now, and so on..." INDEX { gnOduMonDayCombinedXId, gnOduMonDayCombinedXIdx } ::= { gnOduMonDayCombinedXTable 1 } GnOduMonDayCombinedXEntry ::= SEQUENCE { gnOduMonDayCombinedXId INTEGER, gnOduMonDayCombinedXIdx INTEGER, gnOduMonDayCombinedXMinRL INTEGER, gnOduMonDayCombinedXMaxRL INTEGER, gnOduMonDayCombinedXRLThresh1Exceed Counter, gnOduMonDayCombinedXRLThresh2Exceed Counter } gnOduMonDayCombinedXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { gnOduMonDayCombinedXEntry 1 } gnOduMonDayCombinedXIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION " The interval number to which this row is related. " ::= { gnOduMonDayCombinedXEntry 2 } gnOduMonDayCombinedXMinRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum Receive Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayCombinedXEntry 3} gnOduMonDayCombinedXMaxRL OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum Receive Level (in DBM). in a 24 hour interval." ::= { gnOduMonDayCombinedXEntry 4} gnOduMonDayCombinedXRLThresh1Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL1 threshold in a 24 hour interval." ::= { gnOduMonDayCombinedXEntry 5} gnOduMonDayCombinedXRLThresh2Exceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of seconds RL exceeded the RL2 threshold in a 24 hour interval." ::= { gnOduMonDayCombinedXEntry 6} ---------------------------------------------------- gnIDU OBJECT IDENTIFIER ::= { gnUnits 2 } gnMdm OBJECT IDENTIFIER ::= { gnIDU 1 } gnMdmStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMdmStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the status of the Indoor part of the system." ::= { gnMdm 2 } gnMdmStatEntry OBJECT-TYPE SYNTAX GnMdmStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the IDU Modem Configuration Table. This table contains two rows, indexed by ifIndex= 1 for local modem and ifIndex = 101 for remote modem." INDEX { ifIndex } ::= { gnMdmStatTable 1 } GnMdmStatEntry ::= SEQUENCE { gnMdmModStatus INTEGER, gnMdmDemodStatus INTEGER, gnMdmDefectBlocks INTEGER, gnMdmBytesCorrected INTEGER, gnMdmClearBC INTEGER } gnMdmModStatus OBJECT-TYPE SYNTAX INTEGER { ok(2), modulatorFault(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameters indicates a modem fault. " ::= { gnMdmStatEntry 1 } gnMdmDemodStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameters indicates a demodem fault - For internal use." ::= { gnMdmStatEntry 2 } gnMdmDefectBlocks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of defected blocks that could not be corrected by the FEC " ::= { gnMdmStatEntry 3 } gnMdmBytesCorrected OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of bytes corrected by the FEC" ::= { gnMdmStatEntry 4 } gnMdmClearBC OBJECT-TYPE SYNTAX INTEGER { noAction(2), clear(3) } ACCESS read-write STATUS mandatory DESCRIPTION " clears Defected Blocks, Defected Bytes and Blocks Corrected." ::= { gnMdmStatEntry 5 } gnMdmStatXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMdmStatXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the status of the Indoor part of the system." ::= { gnMdm 3 } gnMdmStatXEntry OBJECT-TYPE SYNTAX GnMdmStatXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the IDU Modem Configuration Table." INDEX { gnMdmStatXId } ::= { gnMdmStatXTable 1 } GnMdmStatXEntry ::= SEQUENCE { gnMdmStatXId INTEGER, gnMdmStatXStandardOrg INTEGER, gnMdmStatXRemoteConnection INTEGER, gnMdmStatXModemType INTEGER, gnMdmStatXModemWorkTime INTEGER, gnMdmStatXModemSerialNumber DisplayString, gnMdmStatXModemFWVer DisplayString, gnMdmStatXModemFWPostVer DisplayString, gnMdmStatXModemScriptVer DisplayString, gnMdmStatXModemScriptPostVer DisplayString, gnMdmStatXIfLoopbackTimeOut INTEGER, gnMdmStatXBoardType INTEGER, gnMdmStatXDefectedBlocks INTEGER, gnMdmStatXScriptType INTEGER, gnMdmStatXAcmValidIntervals INTEGER, gnMdmStatXAcmSignalValid INTEGER, gnMdmStatXTxConstellation INTEGER, gnMdmStatXRxConstellation INTEGER } gnMdmStatXId OBJECT-TYPE SYNTAX INTEGER { modem1(3), modem2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnMdmStatXEntry 1 } gnMdmStatXStandardOrg OBJECT-TYPE SYNTAX INTEGER { etsi(2), fcc(3), japan(4), lmds(5), cmds(6), australia(7), other(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies which international standard is used." ::= { gnMdmStatXEntry 2 } gnMdmStatXRemoteConnection OBJECT-TYPE SYNTAX INTEGER { connected(2), disconnected(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the connection between the local manager and the remote manager." ::= { gnMdmStatXEntry 3 } gnMdmStatXModemType OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the modem qam." ::= { gnMdmStatXEntry 4 } gnMdmStatXModemWorkTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The modem Work Time (hours)." DEFVAL {0} ::= { gnMdmStatXEntry 5 } gnMdmStatXModemSerialNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the modem serial number - up to 20 characters " ::= { gnMdmStatXEntry 6 } gnMdmStatXModemFWVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Modem firmware version." ::= { gnMdmStatXEntry 7 } gnMdmStatXModemFWPostVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Modem post reset firmware version." ::= { gnMdmStatXEntry 8 } gnMdmStatXModemScriptVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Modem script version." ::= { gnMdmStatXEntry 9 } gnMdmStatXModemScriptPostVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Modem post reset script version." ::= { gnMdmStatXEntry 10 } gnMdmStatXIfLoopbackTimeOut OBJECT-TYPE SYNTAX INTEGER (0..1440) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the remaining time (in minutes) till the relevant loopback timer will be expired. when starting a loopback and the value of gnMdmStatXIfLoopbackTimeOut is x, the gnMdmStatXIfLoopbackTimeOut will be also x, after one minute it will be x-1, etc." ::= { gnMdmStatXEntry 11 } gnMdmStatXBoardType OBJECT-TYPE SYNTAX INTEGER { v1(2), -- phos v2(3), -- summit v3(4) -- avalon } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter defines the type of the modem for NMS use." DEFVAL { v1 } ::= { gnMdmStatXEntry 12 } gnMdmStatXDefectedBlocks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of defected blocks. " ::= { gnMdmStatXEntry 13 } gnMdmStatXScriptType OBJECT-TYPE SYNTAX INTEGER{ v1(2), v2(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the type of the script. v1 - Regular MRMC script. v2 - ACM MRMC script." ::= { gnMdmStatXEntry 14 } gnMdmStatXAcmValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the number of valid intervals." ::= { gnMdmStatXEntry 15 } gnMdmStatXAcmSignalValid OBJECT-TYPE SYNTAX INTEGER{ valid(2), notValid(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates whether the modem is lock in ACM." ::= { gnMdmStatXEntry 16 } gnMdmStatXTxConstellation OBJECT-TYPE SYNTAX INTEGER (0..1024) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the current Tx modem constellation." ::= { gnMdmStatXEntry 17 } gnMdmStatXRxConstellation OBJECT-TYPE SYNTAX INTEGER (0..1024) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the current Rx modem constellation." ::= { gnMdmStatXEntry 18 } gnMdmCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMdmCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { gnMdm 4 } gnMdmCfgEntry OBJECT-TYPE SYNTAX GnMdmCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { gnMdmCfgId } ::= { gnMdmCfgTable 1 } GnMdmCfgEntry ::= SEQUENCE { gnMdmCfgId INTEGER, gnMdmCfgDiversityMode INTEGER } gnMdmCfgId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnMdmCfgEntry 1 } gnMdmCfgDiversityMode OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " " DEFVAL { disable } ::= { gnMdmCfgEntry 2 } gnMdmCfgXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMdmCfgXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of modem." ::= { gnMdm 5 } gnMdmCfgXEntry OBJECT-TYPE SYNTAX GnMdmCfgXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the modem configuration table." INDEX { gnMdmCfgXId } ::= { gnMdmCfgXTable 1 } GnMdmCfgXEntry ::= SEQUENCE { gnMdmCfgXId INTEGER, gnMdmCfgXLatencyType INTEGER, gnMdmCfgXLinkId INTEGER, gnMdmCfgXRadioSide INTEGER, gnMdmCfgXMrmcConf INTEGER, gnMdmCfgXIfLoopback INTEGER, gnMdmCfgXHwReset INTEGER, gnMdmCfgXPrbsTest INTEGER, gnMdmCfgXClearCounters INTEGER, gnMdmCfgXAcmOperationMode INTEGER, gnMdmCfgXAcmMaximumConstellation INTEGER } gnMdmCfgXId OBJECT-TYPE SYNTAX INTEGER { modem1(3), modem2(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates which device is involved in the specific row." ::= { gnMdmCfgXEntry 1 } gnMdmCfgXLatencyType OBJECT-TYPE SYNTAX INTEGER { low(2), high(3) } ACCESS read-write STATUS mandatory DESCRIPTION " " DEFVAL { high } ::= { gnMdmCfgXEntry 2 } gnMdmCfgXLinkId OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "0 for 'old' system that doesn't support the link ID. the user can enter values from 1 to 65535" DEFVAL {0} ::= { gnMdmCfgXEntry 3 } gnMdmCfgXRadioSide OBJECT-TYPE SYNTAX INTEGER { east(2), west(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL {east} ::= { gnMdmCfgXEntry 4 } gnMdmCfgXMrmcConf OBJECT-TYPE SYNTAX INTEGER { mrmc1528(1), mrmc1550(2), mrmc3156(3), mrmc3150(4), mrmc1228(5), mrmc1540(6), mrmc4410(7), mrmc4420(8), mrmc4440(9), mrmc1125(10), mrmc2050(11), mrmc2030(12), mrmc1340(13), mrmc3756(18), acm56(24), acm50(25), acm28(26) } ACCESS read-write STATUS mandatory DESCRIPTION "The Link data capacity" ::= { gnMdmCfgXEntry 5 } gnMdmCfgXIfLoopback OBJECT-TYPE SYNTAX INTEGER { none(2), active(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter enable the user to activate a loopback." DEFVAL { none } ::= { gnMdmCfgXEntry 6 } gnMdmCfgXHwReset OBJECT-TYPE SYNTAX INTEGER { noOperation(2), hwReset(3) } ACCESS read-write STATUS mandatory DESCRIPTION "hwReset - Hardware reset for modem board." DEFVAL { noOperation } ::= { gnMdmCfgXEntry 7 } gnMdmCfgXPrbsTest OBJECT-TYPE SYNTAX INTEGER { notActive(2), active(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter enable the user to activate the PRBS test." DEFVAL { notActive } ::= { gnMdmCfgXEntry 8 } gnMdmCfgXClearCounters OBJECT-TYPE SYNTAX INTEGER { noAction(2), clearCounters(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter enable the user to clear the PRBS counters." DEFVAL { noAction } ::= { gnMdmCfgXEntry 9 } gnMdmCfgXAcmOperationMode OBJECT-TYPE SYNTAX INTEGER { adaptive(1), acm4QAM(2), acm8QAM(3), acm16QAM(4), acm32QAM(5), acm64QAM(6), acm128QAM(7), acm256QAM(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the administrative status of the ACM operational mode, this mode is valid on ACM script only." DEFVAL { acm4QAM } ::= { gnMdmCfgXEntry 10 } gnMdmCfgXAcmMaximumConstellation OBJECT-TYPE SYNTAX INTEGER { acm4QAM(2), acm8QAM(3), acm16QAM(4), acm32QAM(5), acm64QAM(6), acm128QAM(7), acm256QAM(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the maximum constellation of the ACM." DEFVAL { acm4QAM } ::= { gnMdmCfgXEntry 11 } gnMdmAcmStatXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMdmAcmStatXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the ACM status." ::= { gnMdm 6 } gnMdmAcmStatXEntry OBJECT-TYPE SYNTAX GnMdmAcmStatXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the modem ACM status table." INDEX { gnMdmAcmStatXId, gnMdmAcmStatXQamId } ::= { gnMdmAcmStatXTable 1 } GnMdmAcmStatXEntry ::= SEQUENCE { gnMdmAcmStatXId INTEGER, gnMdmAcmStatXQamId INTEGER, gnMdmAcmStatXRoundedThroughput INTEGER, gnMdmAcmStatXSupportedThroughput INTEGER } gnMdmAcmStatXId OBJECT-TYPE SYNTAX INTEGER{ modem1(3), modem2(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates which device is involved in the specific row." ::= { gnMdmAcmStatXEntry 1 } gnMdmAcmStatXQamId OBJECT-TYPE SYNTAX INTEGER { acm4QAM(2), acm8QAM(3), acm16QAM(4), acm32QAM(5), acm64QAM(6), acm128QAM(7), acm256QAM(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates which QAM is involved in a specific row." DEFVAL { acm4QAM } ::= { gnMdmAcmStatXEntry 2 } gnMdmAcmStatXRoundedThroughput OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates on the rounded throuphput of a specific constellation." DEFVAL { 155 } ::= { gnMdmAcmStatXEntry 3 } gnMdmAcmStatXSupportedThroughput OBJECT-TYPE SYNTAX INTEGER { notSupport(2), support(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates whether the specific constellation is supported." DEFVAL { notSupport } ::= { gnMdmAcmStatXEntry 4 } gnMdmMonitorX OBJECT IDENTIFIER ::= { gnMdm 7 } gnMdmAcmMonitorX OBJECT IDENTIFIER ::= { gnMdmMonitorX 1 } gnMdmAcmMonCurrXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMdmAcmMonCurrXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of the current 15 min interval." ::= { gnMdmAcmMonitorX 1 } gnMdmAcmMonCurrXEntry OBJECT-TYPE SYNTAX GnMdmAcmMonCurrXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Current Interval Table. This table contains two rows, indexed by gnMdmAcmMonCurrXId= 3 for drawer1 modem and gnMdmAcmMonCurrXId = 4 for drawer2 modem." INDEX { gnMdmAcmMonCurrXId } ::= { gnMdmAcmMonCurrXTable 1 } GnMdmAcmMonCurrXEntry ::= SEQUENCE { gnMdmAcmMonCurrXId INTEGER, gnMdmAcmMonCurrXMinConstellation INTEGER, gnMdmAcmMonCurrXMaxConstellation INTEGER, gnMdmAcmMonCurrXIDF INTEGER, gnMdmAcmMonCurrXDayMinConstellation INTEGER, gnMdmAcmMonCurrXDayMaxConstellation INTEGER, gnMdmAcmMonCurrXDayIDF INTEGER } gnMdmAcmMonCurrXId OBJECT-TYPE SYNTAX INTEGER { modem1(3), modem2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnMdmAcmMonCurrXEntry 1 } gnMdmAcmMonCurrXMinConstellation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum modem constellation in the current 15 minute interval." ::= { gnMdmAcmMonCurrXEntry 2 } gnMdmAcmMonCurrXMaxConstellation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum modem constellation in the current 15 minute interval." ::= { gnMdmAcmMonCurrXEntry 3 } gnMdmAcmMonCurrXIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag in current 15 minute interval." DEFVAL { off } ::= { gnMdmAcmMonCurrXEntry 4 } gnMdmAcmMonCurrXDayMinConstellation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum modem constellation in the last 24 hours." ::= { gnMdmAcmMonCurrXEntry 5} gnMdmAcmMonCurrXDayMaxConstellation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum modem constellation in the last 24 hours." ::= { gnMdmAcmMonCurrXEntry 6} gnMdmAcmMonCurrXDayIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag in in the last 24 hours." DEFVAL { off } ::= { gnMdmAcmMonCurrXEntry 7 } gnMdmAcmMonIntervalXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMdmAcmMonIntervalXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of the 96 last intervals of 15 min." ::= { gnMdmAcmMonitorX 2 } gnMdmAcmMonIntervalXEntry OBJECT-TYPE SYNTAX GnMdmAcmMonIntervalXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Interval Table. This table is indexed by gnMdmAcmMonIntervalXId= 3 for drawer1 modem and gnMdmAcmMonIntervalXId = 4 for drawer2 modem and by interval idx" INDEX { gnMdmAcmMonIntervalXId, gnMdmAcmMonIntervalXIdx } ::= { gnMdmAcmMonIntervalXTable 1 } GnMdmAcmMonIntervalXEntry ::= SEQUENCE { gnMdmAcmMonIntervalXId INTEGER, gnMdmAcmMonIntervalXIdx INTEGER, gnMdmAcmMonIntervalXMinConstellation INTEGER, gnMdmAcmMonIntervalXMaxConstellation INTEGER, gnMdmAcmMonIntervalXIDF INTEGER } gnMdmAcmMonIntervalXId OBJECT-TYPE SYNTAX INTEGER { modem1(3), modem2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnMdmAcmMonIntervalXEntry 1 } gnMdmAcmMonIntervalXIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION " The interval number to which this row is related. " ::= { gnMdmAcmMonIntervalXEntry 2 } gnMdmAcmMonIntervalXMinConstellation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum constellation in a 15 minutes interval" ::= { gnMdmAcmMonIntervalXEntry 3 } gnMdmAcmMonIntervalXMaxConstellation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum constellation in a 15 minutes interval" ::= { gnMdmAcmMonIntervalXEntry 4 } gnMdmAcmMonIntervalXIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnMdmAcmMonIntervalXEntry 5 } gnMdmAcmMonDayXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMdmAcmMonDayXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines/keeps the counters of 30 intervals of 24 hours." ::= { gnMdmAcmMonitorX 3 } gnMdmAcmMonDayXEntry OBJECT-TYPE SYNTAX GnMdmAcmMonDayXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Days Table. This table is indexed by gnMdmAcmMonDayXId= 3 for drawer1 modem and gnMdmAcmMonDayXId = 4 for drawer2 modem and by day idx. gnMdmAcmMonDayIdx = 1 is one day from now, gnMdmAcmMonDayIdx = 2 is two days from now, and so on..." INDEX { gnMdmAcmMonDayXId, gnMdmAcmMonDayXIdx } ::= { gnMdmAcmMonDayXTable 1 } GnMdmAcmMonDayXEntry ::= SEQUENCE { gnMdmAcmMonDayXId INTEGER, gnMdmAcmMonDayXIdx INTEGER, gnMdmAcmMonDayXMinConstellation INTEGER, gnMdmAcmMonDayXMaxConstellation INTEGER, gnMdmAcmMonDayXIDF INTEGER } gnMdmAcmMonDayXId OBJECT-TYPE SYNTAX INTEGER { modem1(3), modem2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnMdmAcmMonDayXEntry 1 } gnMdmAcmMonDayXIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION " The interval number to which this row is related. " ::= { gnMdmAcmMonDayXEntry 2 } gnMdmAcmMonDayXMinConstellation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The minimum modem constellation in a 24 hour interval." ::= { gnMdmAcmMonDayXEntry 3} gnMdmAcmMonDayXMaxConstellation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The maximum modem constellation in a 24 hour interval." ::= { gnMdmAcmMonDayXEntry 4} gnMdmAcmMonDayXIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnMdmAcmMonDayXEntry 5 } -- This group contains the parameters concerning the SPI gnSpi OBJECT IDENTIFIER ::= { gnIDU 2 } gnSpiCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnSpiCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the SPI part of the system." ::= { gnSpi 1 } gnSpiCfgEntry OBJECT-TYPE SYNTAX GnSpiCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the SPI Configuration Table. This table contains two rows, indexed by ifIndex= 2 for local SPI and ifIndex = 102 for remote SPI." INDEX { ifIndex } ::= { gnSpiCfgTable 1 } GnSpiCfgEntry ::= SEQUENCE { gnSpiCfgConnector INTEGER } gnSpiCfgConnector OBJECT-TYPE SYNTAX INTEGER { nointerface(1), fiber(2), electrical(3), utp(4), stp(5) } ACCESS read-only STATUS mandatory DESCRIPTION " The physical connector of the SPI - Used only in old regenerators " DEFVAL { fiber } ::= { gnSpiCfgEntry 1 } -- This group contains the parameters concerning the MUX gnMux OBJECT IDENTIFIER ::= { gnIDU 3 } -- This table is for parameters configuration of the regenerator gnRstCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnRstCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the regenerator part of the MUX." ::= { gnMux 1 } gnRstCfgEntry OBJECT-TYPE SYNTAX GnRstCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Regenerator part of the MUX Configuration Table. This table contains a row for every interface which type is SONET(39). for example regenerator on local and remote sides will have four entries 1,2 for local IDU and 101 and 102 for remote IDU." INDEX { ifIndex } ::= { gnRstCfgTable 1 } GnRstCfgEntry ::= SEQUENCE { gnRstCfgTransmittedJ0 DisplayString, gnRstCfgExpectedJ0 DisplayString, gnRstCfgTransparencyJ0 INTEGER, gnRstCfgRSTAISMode INTEGER, gnRstCfgRstEXCThresh INTEGER, gnRstCfgRstSDThresh INTEGER, gnRstCfgTransparencyE1 INTEGER, gnRstCfgTransparencyF1 INTEGER, gnRstCfgTransparencyUnscrambled INTEGER, gnRstCfgMngByteLocation INTEGER, gnRstCfgE1waysideChannel INTEGER, gnRstCfgTransparencyDCCR INTEGER, gnRstCfgTransparencyB1Chan INTEGER, gnRstCfgTestActivate OCTET STRING, gnRstCfgLoopbackOption INTEGER } gnRstCfgTransmittedJ0 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the J0 string that would be sent. This string must be 15 characters in length." DEFVAL {"J0 J0 J0 J0 J0 "} ::= { gnRstCfgEntry 1 } gnRstCfgExpectedJ0 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the J0 string that is expected to be received. This string must be 15 characters in length." DEFVAL {"J0 J0 J0 J0 J0 "} ::= { gnRstCfgEntry 2 } gnRstCfgTransparencyJ0 OBJECT-TYPE SYNTAX INTEGER { active(2), passthrough(3), notActive(4) } ACCESS read-write STATUS mandatory DESCRIPTION " Send the received J0 string transparently or send the Transmitted J0 configured string." DEFVAL { passthrough } ::= { gnRstCfgEntry 3 } gnRstCfgRSTAISMode OBJECT-TYPE SYNTAX INTEGER { sendAIS(2), doNotSendAIS(3) } ACCESS read-write STATUS mandatory DESCRIPTION " In the case of a J0 mismatch error, send or don't send AIS." DEFVAL { doNotSendAIS } ::= { gnRstCfgEntry 4 } gnRstCfgRstEXCThresh OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4) } ACCESS read-write STATUS mandatory DESCRIPTION " If the bit error rate is higher than this threshold an EXC alarm would be generated. EXC is for excessive." DEFVAL { tenExpMinus3} ::= { gnRstCfgEntry 5 } gnRstCfgRstSDThresh OBJECT-TYPE SYNTAX INTEGER { tenExpMinus6(3), tenExpMinus7(4), tenExpMinus8(5), tenExpMinus9(6) } ACCESS read-write STATUS mandatory DESCRIPTION " If the bit error rate is higher than this threshold a SD alarm would be generated. SD is for Signal Degrade." DEFVAL { tenExpMinus6} ::= { gnRstCfgEntry 6 } gnRstCfgTransparencyE1 OBJECT-TYPE SYNTAX INTEGER { active(2), passthrough(3), disable(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit the order wire data received or terminate the E1 data received." DEFVAL { active } ::= { gnRstCfgEntry 7 } gnRstCfgTransparencyF1 OBJECT-TYPE SYNTAX INTEGER { active(2), passthrough(3), disable(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit the F1/User channel data received or terminate the F1/User channel data received. set the TransparencyF1 to disable when the User channel used by In-Band management." DEFVAL { active } ::= { gnRstCfgEntry 8 } gnRstCfgTransparencyUnscrambled OBJECT-TYPE SYNTAX INTEGER { active(2), passthrough(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit the unscrambled national bytes data received or terminate the unscrambled national bytes data received." DEFVAL { passthrough } ::= { gnRstCfgEntry 9 } gnRstCfgMngByteLocation OBJECT-TYPE SYNTAX INTEGER { mediaSpecificBytes(2), spareA1A0Bytes(3), e1Byets(4), noMngBytes(5), dccr(6), dccm(7), userChannel(8), waysideChannel(9) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates which media specific bytes are in use and which are transparent. not currently supported" DEFVAL { mediaSpecificBytes } ::= { gnRstCfgEntry 10 } gnRstCfgE1waysideChannel OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) -- inband(4) } ACCESS read-write STATUS mandatory DESCRIPTION "If this parameter is enabled, an E1 wayside channel will be sent through the network using the unused bytes in the SDH header." DEFVAL { enabled } ::= { gnRstCfgEntry 11 } gnRstCfgTransparencyDCCR OBJECT-TYPE SYNTAX INTEGER { active(2), passthrough(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit on the DCCR channel or terminate the DCCR channel." DEFVAL { passthrough } ::= { gnRstCfgEntry 12 } gnRstCfgTransparencyB1Chan OBJECT-TYPE SYNTAX INTEGER { active(2), passthrough(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Correct B1 byte or send transmit it transparently ." DEFVAL { passthrough } ::= { gnRstCfgEntry 13 } gnRstCfgTestActivate OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-write STATUS mandatory DESCRIPTION "This field allows the NMS to activate the following tests: bit 1 = 1 Force AIS bit 2 = 1 Force RDI." ::= { gnRstCfgEntry 14 } gnRstCfgLoopbackOption OBJECT-TYPE SYNTAX INTEGER { noloopback(2), interfaceInterLoop(3), interfaceExterLoop(4) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter enable the user to activate a loopback ." DEFVAL { noloopback } ::= { gnRstCfgEntry 15 } gnRstStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnRstStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the status of the regenerator part of the MUX." ::= { gnMux 2 } gnRstStatEntry OBJECT-TYPE SYNTAX GnRstStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Regenerator part of the MUX Status Table. This table contains a row for every interface which type is SONET(39)." INDEX { ifIndex } ::= { gnRstStatTable 1 } GnRstStatEntry ::= SEQUENCE { gnRstStatReceivedJ0 DisplayString, gnRstStatBERCur INTEGER, gnRstStatStatus OCTET STRING, gnRstStatClearLoopTimer INTEGER } gnRstStatReceivedJ0 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the J0 string received." ::= { gnRstStatEntry 1 } gnRstStatBERCur OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13) } ACCESS read-only STATUS mandatory DESCRIPTION " Current Bit Error Rate. " ::= { gnRstStatEntry 2 } gnRstStatStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION " bit 2 = LOS bit 3 = LOF bit 7 = TIM bit 9 = SD bit 10 = EXC bit 11 = UNEXP" ::= { gnRstStatEntry 3 } gnRstStatClearLoopTimer OBJECT-TYPE SYNTAX INTEGER (0..1440) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the remaining time (in minutes) till the relevant loopback timer will be expired. when starting a loopback and the value of gnGenCfgClearLoopTimeout is x, the gnRstStatClearLoopTimer will be also x, after one minute it will be x-1, etc. gnRstStatClearLoopTimer.1 is for the radio aggregate loopbacks, gnRstStatClearLoopTimer.2 is for the line aggregate loopbacks" ::= { gnRstStatEntry 4 } -- Statistics For Regenerator gnRstMon OBJECT IDENTIFIER ::= { gnMux 3 } gnRstMonCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF GnRstMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the regenerator part of the MUX." ::= { gnRstMon 1 } gnRstMonCurrEntry OBJECT-TYPE SYNTAX GnRstMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Regenerator part of the MUX Counters Table. This table contains a row for every interface which type is SONET(39)." INDEX { ifIndex } ::= { gnRstMonCurrTable 1 } GnRstMonCurrEntry ::= SEQUENCE { --gnRstMonCurrES rfc1595 -- Counter, --gnRstMonCurrSES -- Counter, gnRstMonCurrBBE Gauge, gnRstMonCurrUAS Gauge, --gnRstMonCurrOFS -- Counter, gnRstMonCurrLastDayES Gauge, gnRstMonCurrLastDaySES Gauge, gnRstMonCurrLastDayBBE Gauge, gnRstMonCurrLastDayUAS Gauge, gnRstMonCurrLastDayOFS Gauge, gnRstMonCurrLastDayIDF INTEGER } gnRstMonCurrBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 15 minutes period." ::= { gnRstMonCurrEntry 1} gnRstMonCurrUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 15 minutes period." ::= { gnRstMonCurrEntry 2} gnRstMonCurrLastDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Errored Seconds starting from the present 24 hours period." ::= { gnRstMonCurrEntry 3 } gnRstMonCurrLastDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Severely Errored Seconds starting from the present 24 hours period." ::= { gnRstMonCurrEntry 4 } gnRstMonCurrLastDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 24 hours period." ::= { gnRstMonCurrEntry 5 } gnRstMonCurrLastDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 24 hours period." ::= { gnRstMonCurrEntry 6 } gnRstMonCurrLastDayOFS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Out Of Frame Seconds starting from the present 24 hours period." ::= { gnRstMonCurrEntry 7} gnRstMonCurrLastDayIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnRstMonCurrEntry 8 } gnRstMonIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF GnRstMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the regenerator part of the MUX per interval." ::= { gnRstMon 2 } gnRstMonIntervalEntry OBJECT-TYPE SYNTAX GnRstMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Regenerator part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96." INDEX { ifIndex, gnRstMonIntervalIdx} ::= { gnRstMonIntervalTable 1 } GnRstMonIntervalEntry ::= SEQUENCE { gnRstMonIntervalIdx INTEGER, --gnRstMonIntervalES -- Counter, --gnRstMonIntervalSES -- Counter, gnRstMonIntervalBBE Gauge, gnRstMonIntervalUAS -- Counter, --gnRstMonIntervalOFS Gauge, gnRstMonIntervalIDF INTEGER -- , -- gnRstMonIntervalTimeStampMonth -- INTEGER, -- gnRstMonIntervalTimeStampDay -- INTEGER, -- gnRstMonIntervalTimeStampHour -- INTEGER, -- gnRstMonIntervalTimeStampMinute -- INTEGER } gnRstMonIntervalIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96." ::= { gnRstMonIntervalEntry 1 } gnRstMonIntervalBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval." ::= { gnRstMonIntervalEntry 2} gnRstMonIntervalUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval." ::= { gnRstMonIntervalEntry 3} gnRstMonIntervalIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnRstMonIntervalEntry 4 } -- gnRstMonIntervalTimeStampMonth OBJECT-TYPE -- SYNTAX INTEGER (1..12) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The Month of this interval time stamp.Not currently supported." -- ::= { gnRstMonIntervalEntry 4 } -- gnRstMonIntervalTimeStampDay OBJECT-TYPE -- SYNTAX INTEGER (1..31) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The Day of this interval time stamp.Not currently supported." -- ::= { gnRstMonIntervalEntry 5 } -- gnRstMonIntervalTimeStampHour OBJECT-TYPE -- SYNTAX INTEGER (0..23) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The Hour of this interval time stamp.Not currently supported." -- ::= { gnRstMonIntervalEntry 6 } -- gnRstMonIntervalTimeStampMinute OBJECT-TYPE -- SYNTAX INTEGER (0..59) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The Minute of this interval time stamp.Not currently supported." -- ::= { gnRstMonIntervalEntry 7 } gnRstMonDayTable OBJECT-TYPE SYNTAX SEQUENCE OF GnRstMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the regenerator part of the MUX per 24 hours interval." ::= { gnRstMon 3 } gnRstMonDayEntry OBJECT-TYPE SYNTAX GnRstMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Regenerator part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30." INDEX { ifIndex, gnRstMonDayIdx} ::= { gnRstMonDayTable 1 } GnRstMonDayEntry ::= SEQUENCE { gnRstMonDayIdx INTEGER, gnRstMonDayES Gauge, gnRstMonDaySES Gauge, gnRstMonDayBBE Gauge, gnRstMonDayUAS Gauge, gnRstMonDayOFS Gauge, gnRstMonDayIDF INTEGER -- , -- gnRstMonDayTimeStampMonth -- INTEGER, -- gnRstMonDayTimeStampDay -- INTEGER, -- gnRstMonDayTimeStampHour -- INTEGER, -- gnRstMonDayTimeStampMinute -- INTEGER } gnRstMonDayIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30." ::= { gnRstMonDayEntry 1 } gnRstMonDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Errored Seconds per interval of 24 hours." ::= { gnRstMonDayEntry 2} gnRstMonDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Severely Errored Seconds per interval of 24 hours." ::= { gnRstMonDayEntry 3} gnRstMonDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval of 24 hours." ::= { gnRstMonDayEntry 4 } gnRstMonDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval of 24 hours." ::= { gnRstMonDayEntry 5 } gnRstMonDayOFS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Out Of Frame Seconds per interval of 24 hours." ::= { gnRstMonDayEntry 6} gnRstMonDayIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnRstMonDayEntry 7 } -- gnRstMonDayTimeStampMonth OBJECT-TYPE -- SYNTAX INTEGER (1..12) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The Month of this interval time stamp.Not currently supported." -- ::= { gnRstMonDayEntry 7 } -- gnRstMonDayTimeStampDay OBJECT-TYPE -- SYNTAX INTEGER (1..31) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The Day of this interval time stamp.Not currently supported." -- ::= { gnRstMonDayEntry 8 } -- gnRstMonDayTimeStampHour OBJECT-TYPE -- SYNTAX INTEGER (0..23) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The Hour of this interval time stamp.Not currently supported." -- ::= { gnRstMonDayEntry 9 } -- gnRstMonDayTimeStampMinute OBJECT-TYPE -- SYNTAX INTEGER (0..59) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The Minute of this interval time stamp.Not currently supported." -- ::= { gnRstMonDayEntry 10 } -- MST part of the MUX. All of the MST tables are included for future -- development and are not currently implemented. gnMstCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMstCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the MST part of the MUX." ::= { gnMux 4 } gnMstCfgEntry OBJECT-TYPE SYNTAX GnMstCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the MST part of the MUX Configuration Table. This table contains a row for every interface which type is SONET(39)." INDEX { ifIndex } ::= { gnMstCfgTable 1 } GnMstCfgEntry ::= SEQUENCE { gnMstCfgEXCThresh INTEGER, gnMstCfgSDThresh INTEGER } gnMstCfgEXCThresh OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4) } ACCESS read-write STATUS mandatory DESCRIPTION " If the bit error rate is higher than this threshold an EXC alarm would be generated. EXC is for excessive." DEFVAL { tenExpMinus3} ::= { gnMstCfgEntry 1 } gnMstCfgSDThresh OBJECT-TYPE SYNTAX INTEGER { tenExpMinus6(3), tenExpMinus7(4), tenExpMinus8(5), tenExpMinus9(6) } ACCESS read-write STATUS mandatory DESCRIPTION " If the bit error rate is higher than this threshold a SD alarm would be generated. SD is for Signal Degrade." DEFVAL { tenExpMinus6} ::= { gnMstCfgEntry 2 } gnMstStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMstStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the status of the MST part of the MUX." ::= { gnMux 5 } gnMstStatEntry OBJECT-TYPE SYNTAX GnMstStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the MST part of the MUX Status Table. This table contains a row for every interface which type is SONET(39)." INDEX { ifIndex } ::= { gnMstStatTable 1 } GnMstStatEntry ::= SEQUENCE { gnMstStatReceivedS1 INTEGER, gnMstStatStatus OCTET STRING, gnMstStatTransmitS1 INTEGER, gnMstStatCurrentBer INTEGER, gnMstStatReceivedK1 INTEGER, gnMstStatReceivedK2 INTEGER, gnMstStatTransmitK1 INTEGER, gnMstStatTransmitK2 INTEGER } gnMstStatReceivedS1 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION " Received Synchronization status byte." ::= { gnMstStatEntry 1 } gnMstStatStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION " Alarm status. Bit 1 is MSB, bit=1 when alarm active. bit 5 = RDI bit 6 = AIS bit 9 = SD bit 10 = EXC bit 16 = PAM (MSP) bit 17 = SCM (MSP) bit 18 = INV (MSP) " ::= { gnMstStatEntry 2 } gnMstStatTransmitS1 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION " Transmitted Synchronization status byte." ::= { gnMstStatEntry 3 } gnMstStatCurrentBer OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnMstStatEntry 4 } gnMstStatReceivedK1 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Received K1 byte (Automatic Protection Switch message)." ::= { gnMstStatEntry 5 } gnMstStatReceivedK2 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Received K2 byte (Automatic Protection Switch message)." ::= { gnMstStatEntry 6 } gnMstStatTransmitK1 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted K1 byte (Automatic Protection Switch message)." ::= { gnMstStatEntry 7 } gnMstStatTransmitK2 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted K2 byte (Automatic Protection Switch message)." ::= { gnMstStatEntry 8 } -- Statistics For MST. All MST tables are included for future development -- and are not currently implemented. gnMstMon OBJECT IDENTIFIER ::= { gnMux 6 } gnMstMonCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMstMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the MST part of the MUX." ::= { gnMstMon 1 } gnMstMonCurrEntry OBJECT-TYPE SYNTAX GnMstMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the MST part of the MUX Counters Table. This table contains a row for every interface which type is SONET(39)." INDEX { ifIndex } ::= { gnMstMonCurrTable 1 } GnMstMonCurrEntry ::= SEQUENCE { --gnMstMonCurrES rfc1595 -- Counter, --gnMstMonCurrSES -- Counter, gnMstMonCurrBBE Gauge, gnMstMonCurrUAS Gauge, gnMstMonCurrLastDayES Gauge, gnMstMonCurrLastDaySES Gauge, gnMstMonCurrLastDayBBE Gauge, gnMstMonCurrLastDayUAS Gauge } gnMstMonCurrBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 15 minutes period." ::= { gnMstMonCurrEntry 1} gnMstMonCurrUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 15 minutes period." ::= { gnMstMonCurrEntry 2} gnMstMonCurrLastDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Errored Seconds starting from the present 24 hours period." ::= { gnMstMonCurrEntry 3 } gnMstMonCurrLastDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Severely Errored Seconds starting from the present 24 hours period." ::= { gnMstMonCurrEntry 4 } gnMstMonCurrLastDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 24 hours period." ::= { gnMstMonCurrEntry 5 } gnMstMonCurrLastDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 24 hours period." ::= { gnMstMonCurrEntry 6 } gnMstMonIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMstMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the MST part of the MUX per interval." ::= { gnMstMon 2 } gnMstMonIntervalEntry OBJECT-TYPE SYNTAX GnMstMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the MST part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96." INDEX { ifIndex, gnMstMonIntervalIdx} ::= { gnMstMonIntervalTable 1 } GnMstMonIntervalEntry ::= SEQUENCE { gnMstMonIntervalIdx INTEGER, --gnMstMonIntervalES -- Counter, --gnMstMonIntervalSES -- Counter, gnMstMonIntervalBBE Gauge, gnMstMonIntervalUAS Gauge } gnMstMonIntervalIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96." ::= { gnMstMonIntervalEntry 1 } gnMstMonIntervalBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval." ::= { gnMstMonIntervalEntry 2} gnMstMonIntervalUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval." ::= { gnMstMonIntervalEntry 3} gnMstMonDayTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMstMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the MST part of the MUX per 24 hours interval." ::= { gnMstMon 3 } gnMstMonDayEntry OBJECT-TYPE SYNTAX GnMstMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the MST part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30." INDEX { ifIndex, gnMstMonDayIdx} ::= { gnMstMonDayTable 1 } GnMstMonDayEntry ::= SEQUENCE { gnMstMonDayIdx INTEGER, gnMstMonDayES Gauge, gnMstMonDaySES Gauge, gnMstMonDayBBE Gauge, gnMstMonDayUAS Gauge } gnMstMonDayIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30." ::= { gnMstMonDayEntry 1 } gnMstMonDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Errored Seconds per interval of 24 hours." ::= { gnMstMonDayEntry 2} gnMstMonDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Severely Errored Seconds per interval of 24 hours." ::= { gnMstMonDayEntry 3} gnMstMonDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval of 24 hours." ::= { gnMstMonDayEntry 4 } gnMstMonDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval of 24 hours." ::= { gnMstMonDayEntry 5 } gnMstFarEndMonCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMstFarEndMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the far end MST part of the MUX. This Table is not supported." ::= { gnMstMon 4 } gnMstFarEndMonCurrEntry OBJECT-TYPE SYNTAX GnMstFarEndMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the far end MST part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39)." INDEX { ifIndex } ::= { gnMstFarEndMonCurrTable 1 } GnMstFarEndMonCurrEntry ::= SEQUENCE { --gnMstFarEndMonCurrES rfc1595 -- Counter, --gnMstFarEndMonCurrSES -- Counter, gnMstFarEndMonCurrBBE Gauge, gnMstFarEndMonCurrUAS Gauge, gnMstFarEndMonCurrLastDayES Gauge, gnMstFarEndMonCurrLastDaySES Gauge, gnMstFarEndMonCurrLastDayBBE Gauge, gnMstFarEndMonCurrLastDayUAS Gauge } gnMstFarEndMonCurrBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 15 minutes period." ::= { gnMstFarEndMonCurrEntry 1} gnMstFarEndMonCurrUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 15 minutes period." ::= { gnMstFarEndMonCurrEntry 2} gnMstFarEndMonCurrLastDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Errored Seconds starting from the present 24 hours period." ::= { gnMstFarEndMonCurrEntry 3 } gnMstFarEndMonCurrLastDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Severely Errored Seconds starting from the present 24 hours period." ::= { gnMstFarEndMonCurrEntry 4 } gnMstFarEndMonCurrLastDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 24 hours period." ::= { gnMstFarEndMonCurrEntry 5 } gnMstFarEndMonCurrLastDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 24 hours period." ::= { gnMstFarEndMonCurrEntry 6 } gnMstFarEndMonIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMstFarEndMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the far end MST part of the MUX per interval. This Table is not supported." ::= { gnMstMon 5 } gnMstFarEndMonIntervalEntry OBJECT-TYPE SYNTAX GnMstFarEndMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the far end MST part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39) This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96." INDEX { ifIndex, gnMstFarEndMonIntervalIdx} ::= { gnMstFarEndMonIntervalTable 1 } GnMstFarEndMonIntervalEntry ::= SEQUENCE { gnMstFarEndMonIntervalIdx INTEGER, --gnMstFarEndMonIntervalES -- Counter, --gnMstFarEndMonIntervalSES -- Counter, gnMstFarEndMonIntervalBBE Gauge, gnMstFarEndMonIntervalUAS Gauge } gnMstFarEndMonIntervalIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96." ::= { gnMstFarEndMonIntervalEntry 1 } gnMstFarEndMonIntervalBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval." ::= { gnMstFarEndMonIntervalEntry 2} gnMstFarEndMonIntervalUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval." ::= { gnMstFarEndMonIntervalEntry 3} gnMstFarEndMonDayTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMstFarEndMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the far end MST part of the MUX per 24 hours interval. This Table is not supported." ::= { gnMstMon 6 } gnMstFarEndMonDayEntry OBJECT-TYPE SYNTAX GnMstFarEndMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the far end MST part of the MUX Counters Table. This table contains an interface index for every interface which type is SONET(39). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30." INDEX { ifIndex, gnMstFarEndMonDayIdx} ::= { gnMstFarEndMonDayTable 1 } GnMstFarEndMonDayEntry ::= SEQUENCE { gnMstFarEndMonDayIdx INTEGER, gnMstFarEndMonDayES Gauge, gnMstFarEndMonDaySES Gauge, gnMstFarEndMonDayBBE Gauge, gnMstFarEndMonDayUAS Gauge } gnMstFarEndMonDayIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30." ::= { gnMstFarEndMonDayEntry 1 } gnMstFarEndMonDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Errored Seconds per interval of 24 hours." ::= { gnMstFarEndMonDayEntry 2} gnMstFarEndMonDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Severely Errored Seconds per interval of 24 hours." ::= { gnMstFarEndMonDayEntry 3} gnMstFarEndMonDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval of 24 hours." ::= { gnMstFarEndMonDayEntry 4 } gnMstFarEndMonDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval of 24 hours." ::= { gnMstFarEndMonDayEntry 5 } -- HPT part of the MUX. All HPT tables are included for future development -- and are not currently implemented. gnHptCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnHptCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the HPT part of the MUX." ::= { gnMux 7 } gnHptCfgEntry OBJECT-TYPE SYNTAX GnHptCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the HPT part of the MUX Configuration Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573)." INDEX { ifIndex } ::= { gnHptCfgTable 1 } GnHptCfgEntry ::= SEQUENCE { gnHptCfgTransmittedJ1 DisplayString, gnHptCfgExpectedJ1 DisplayString, gnHptCfgMismatchJ1 INTEGER, gnHptCfgTransparencyJ1 INTEGER, gnHptCfgEXCThresh INTEGER, gnHptCfgSDThresh INTEGER, gnHptCfgTug3Structure1 OCTET STRING, gnHptCfgTug3Structure2 OCTET STRING, gnHptCfgTug3Structure3 OCTET STRING, gnHptCfgSignalLabelMismatch INTEGER, gnHptCfgTrailPT1 OCTET STRING, gnHptCfgTrailPT2 OCTET STRING, gnHptCfgTrailPT3 OCTET STRING } gnHptCfgTransmittedJ1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION " This is the J1 string that would be sent." DEFVAL { " ACCESS MUX " } ::= { gnHptCfgEntry 1 } gnHptCfgExpectedJ1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION " This is the J1 string that is expected to be received." DEFVAL { " ACCESS MUX " } ::= { gnHptCfgEntry 2 } gnHptCfgMismatchJ1 OBJECT-TYPE SYNTAX INTEGER{ sendAlarm(2), sendAIS(3) } ACCESS read-write STATUS mandatory DESCRIPTION " In case of a J1 mismatch error, send or don't send AIS." DEFVAL { sendAlarm } ::= { gnHptCfgEntry 3 } gnHptCfgTransparencyJ1 OBJECT-TYPE SYNTAX INTEGER { active(2), passthrough(3), notActive(4) } ACCESS read-write STATUS mandatory DESCRIPTION " Send the received J1 string transparently or send the Transmitted J1 configured string." DEFVAL { passthrough } ::= { gnHptCfgEntry 4 } gnHptCfgEXCThresh OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4) } ACCESS read-write STATUS mandatory DESCRIPTION " If the bit error rate is higher than this threshold an EXC alarm would be generated. EXC is for excessive." DEFVAL { tenExpMinus3} ::= { gnHptCfgEntry 5 } gnHptCfgSDThresh OBJECT-TYPE SYNTAX INTEGER { tenExpMinus6(3), tenExpMinus7(4), tenExpMinus8(5), tenExpMinus9(6) } ACCESS read-write STATUS mandatory DESCRIPTION " If the bit error rate is higher than this threshold a SD alarm would be generated. SD is for Signal Degrade." DEFVAL { tenExpMinus6} ::= { gnHptCfgEntry 6 } gnHptCfgTug3Structure1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "This field set the TUG-3 #1 structure: (hexadecimal number) the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG3 #1. (the K of the KLM index is 1) for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is blocked (0) or unblocked (1). if a VC12 is set to blocked (this is the default) the system will send TU-AIS in that VC12. it it is unblocked it will be path-through or mapped to a E1/T1 port (according to the gnAccessCfgLowPathIndex). the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4. Example : SDH, VC12 strcture, blocked VCs: KLM=111,121 (M=1), 112,122 (M=2), 163,173 (M=3), unblocked VCs: all the other. the value in bits will be: 0011111 1111100 1111100 0000, and in Hexadecimal: 0x7FE7C0. (so enter: 00 7F E7 C0)." ::= { gnHptCfgEntry 7 } gnHptCfgTug3Structure2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "This field set the TUG-3 #2 structure: (hexadecimal number) the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #2. (the K of the KLM index is 2) for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is blocked (0) or unblocked (1). if a VC12 is set to blocked (this is the default) the system will send TU-AIS in that VC12. it it is unblocked it will be path-through or mapped to a E1/T1 port (according to the gnAccessCfgLowPathIndex). the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4. Example : SDH, VC12 strcture, blocked VCs: KLM=211,221 (M=1), 212,222 (M=2), 263,273 (M=3), unblocked VCs: all the other. the value in bits will be: 0011111 1111100 1111100 0000, and in Hexadecimal: 0x7FE7C0. (so enter: 00 7F E7 C0)." ::= { gnHptCfgEntry 8 } gnHptCfgTug3Structure3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "This field set the TUG-3 #3 structure: (hexadecimal number) the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #3. (the K of the KLM index is 3) for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is blocked (0) or unblocked (1). if a VC12 is set to blocked (this is the default) the system will send TU-AIS in that VC12. it it is unblocked it will be path-through or mapped to a E1/T1 port (according to the gnAccessCfgLowPathIndex). the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4. Example : SDH, VC12 strcture, blocked VCs: KLM=311,321 (M=1), 312,322 (M=2), 363,373 (M=3), unblocked VCs: all the other. the value in bits will be: 0011111 1111100 1111100 0000, and in Hexadecimal: 0x7FE7C0. (so enter: 00 7F E7 C0)." ::= { gnHptCfgEntry 9 } gnHptCfgSignalLabelMismatch OBJECT-TYPE SYNTAX INTEGER{ sendAlarm(2), sendAIS(3) } ACCESS read-write STATUS mandatory DESCRIPTION " In case of a C2 mismatch error, send or don't send AIS." DEFVAL { sendAlarm } ::= { gnHptCfgEntry 10 } gnHptCfgTrailPT1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "This field set the TUG-3 #1 Trails Pass Through (hexadecimal number) It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the last in the configuration chain. the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #1. for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is Pass-Through disabled (0, default) or Pass-Through enabled (1). if it is VC12, the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4." ::= { gnHptCfgEntry 11 } gnHptCfgTrailPT2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "This field set the TUG-3 #2 Trails Pass Through (hexadecimal number). It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the last in the configuration chain. the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #2. for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is Pass-Through disabled (0, default) or Pass-Through enabled (1). if it is VC12, the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4." ::= { gnHptCfgEntry 12 } gnHptCfgTrailPT3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "This field set the TUG-3 #3 Trails Pass Through (hexadecimal number) It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the last in the configuration chain. the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #3. for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET) set each of the VC12 to be blocked (bit is 0) or unblocked (bit is 1). if it is VC3 only one more bit indicates if it is Pass-Through disabled (0, default) or Pass-Through enabled (1). if it is VC12, the 21 or 28 bits order is as folwed (from lsb to msb direction): first 7 bits for M=1 (from KLM index), the next 7 bits for M=2, the next for M=3, and the last (only for SONET) for M=4." ::= { gnHptCfgEntry 13 } gnHptStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnHptStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the status of the HPT part of the MUX." ::= { gnMux 8 } gnHptStatEntry OBJECT-TYPE SYNTAX GnHptStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the HPT part of the MUX Status Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573)." INDEX { ifIndex } ::= { gnHptStatTable 1 } GnHptStatEntry ::= SEQUENCE { gnHptStatReceivedJ1 DisplayString, gnHptStatStatus OCTET STRING, -- gnHptStatFarEndStatus -- OCTET STRING, gnHptStatCurrentBer INTEGER, gnHptStatFarEndCurrentBer INTEGER, gnHptStatReceivedSignalLabel OCTET STRING } gnHptStatReceivedJ1 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the J1 string that was received." ::= { gnHptStatEntry 1 } gnHptStatStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "Alarm status byte. Bit 1 is MSB, bit=1 when alarm active. bit 4 = LOP bit 5 = RDI bit 6 = AIS bit 7 = TIM bit 8 = SLM/PLM bit 9 = SD bit 10 = EXC bit 12 = UNEQ bit 15 = LOM" ::= { gnHptStatEntry 2 } --gnHptStatFarEndStatus OBJECT-TYPE -- SYNTAX OCTET STRING(SIZE(2)) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Alarm status byte. Bit 1 is MSB, bit=1 when alarm active. -- bit 5 = RDI" -- ::= { gnHptStatEntry 3 } gnHptStatCurrentBer OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnHptStatEntry 3 } gnHptStatFarEndCurrentBer OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnHptStatEntry 4 } gnHptStatReceivedSignalLabel OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the C2 string that was received." ::= { gnHptStatEntry 5 } -- Statistics For HPT. All HPT tables are included for future development -- and are not currently implemented. gnHptMon OBJECT IDENTIFIER ::= { gnMux 9 } gnHptMonCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF GnHptMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the HPT part of the MUX." ::= { gnHptMon 1 } gnHptMonCurrEntry OBJECT-TYPE SYNTAX GnHptMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573)." INDEX { ifIndex } ::= { gnHptMonCurrTable 1 } GnHptMonCurrEntry ::= SEQUENCE { --gnHptMonCurrES rfc1595 -- Counter, --gnHptMonCurrSES -- Counter, gnHptMonCurrBBE Gauge, gnHptMonCurrUAS Gauge, gnHptMonCurrLastDayES Gauge, gnHptMonCurrLastDaySES Gauge, gnHptMonCurrLastDayBBE Gauge, gnHptMonCurrLastDayUAS Gauge } gnHptMonCurrBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 15 minutes period." ::= { gnHptMonCurrEntry 1} gnHptMonCurrUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 15 minutes period." ::= { gnHptMonCurrEntry 2} gnHptMonCurrLastDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Errored Seconds starting from the present 24 hours period." ::= { gnHptMonCurrEntry 3 } gnHptMonCurrLastDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Severely Errored Seconds starting from the present 24 hours period." ::= { gnHptMonCurrEntry 4 } gnHptMonCurrLastDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 24 hours period." ::= { gnHptMonCurrEntry 5 } gnHptMonCurrLastDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 24 hours period." ::= { gnHptMonCurrEntry 6 } gnHptMonIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF GnHptMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the HPT part of the MUX per interval." ::= { gnHptMon 2 } gnHptMonIntervalEntry OBJECT-TYPE SYNTAX GnHptMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96." INDEX { ifIndex, gnHptMonIntervalIdx} ::= { gnHptMonIntervalTable 1 } GnHptMonIntervalEntry ::= SEQUENCE { gnHptMonIntervalIdx INTEGER, --gnHptMonIntervalES -- Counter, --gnHptMonIntervalSES -- Counter, gnHptMonIntervalBBE Gauge, gnHptMonIntervalUAS Gauge } gnHptMonIntervalIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96." ::= { gnHptMonIntervalEntry 1 } gnHptMonIntervalBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval." ::= { gnHptMonIntervalEntry 2} gnHptMonIntervalUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval." ::= { gnHptMonIntervalEntry 3} gnHptMonDayTable OBJECT-TYPE SYNTAX SEQUENCE OF GnHptMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the HPT part of the MUX per 24 hours interval." ::= { gnHptMon 3 } gnHptMonDayEntry OBJECT-TYPE SYNTAX GnHptMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30." INDEX { ifIndex, gnHptMonDayIdx} ::= { gnHptMonDayTable 1 } GnHptMonDayEntry ::= SEQUENCE { gnHptMonDayIdx INTEGER, gnHptMonDayES Gauge, gnHptMonDaySES Gauge, gnHptMonDayBBE Gauge, gnHptMonDayUAS Gauge } gnHptMonDayIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30." ::= { gnHptMonDayEntry 1 } gnHptMonDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Errored Seconds per interval of 24 hours." ::= { gnHptMonDayEntry 2} gnHptMonDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Severely Errored Seconds per interval of 24 hours." ::= { gnHptMonDayEntry 3} gnHptMonDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval of 24 hours." ::= { gnHptMonDayEntry 4 } gnHptMonDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval of 24 hours." ::= { gnHptMonDayEntry 5 } gnHptFarEndMonCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF GnHptFarEndMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the far end HPT part of the MUX." ::= { gnHptMon 4 } gnHptFarEndMonCurrEntry OBJECT-TYPE SYNTAX GnHptFarEndMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the far end HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573)." INDEX { ifIndex } ::= { gnHptFarEndMonCurrTable 1 } GnHptFarEndMonCurrEntry ::= SEQUENCE { --gnHptFarEndMonCurrES rfc1595 -- Counter, --gnHptFarEndMonCurrSES -- Counter, gnHptFarEndMonCurrBBE Gauge, gnHptFarEndMonCurrUAS Gauge, gnHptFarEndMonCurrLastDayES Gauge, gnHptFarEndMonCurrLastDaySES Gauge, gnHptFarEndMonCurrLastDayBBE Gauge, gnHptFarEndMonCurrLastDayUAS Gauge } gnHptFarEndMonCurrBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 15 minutes period." ::= { gnHptFarEndMonCurrEntry 1} gnHptFarEndMonCurrUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 15 minutes period." ::= { gnHptFarEndMonCurrEntry 2} gnHptFarEndMonCurrLastDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Errored Seconds starting from the present 24 hours period." ::= { gnHptFarEndMonCurrEntry 3 } gnHptFarEndMonCurrLastDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Severely Errored Seconds starting from the present 24 hours period." ::= { gnHptFarEndMonCurrEntry 4 } gnHptFarEndMonCurrLastDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 24 hours period." ::= { gnHptFarEndMonCurrEntry 5 } gnHptFarEndMonCurrLastDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 24 hours period." ::= { gnHptFarEndMonCurrEntry 6 } gnHptFarEndMonIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF GnHptFarEndMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the far end HPT part of the MUX per interval." ::= { gnHptMon 5 } gnHptFarEndMonIntervalEntry OBJECT-TYPE SYNTAX GnHptFarEndMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the far end HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96." INDEX { ifIndex, gnHptFarEndMonIntervalIdx} ::= { gnHptFarEndMonIntervalTable 1 } GnHptFarEndMonIntervalEntry ::= SEQUENCE { gnHptFarEndMonIntervalIdx INTEGER, --gnHptFarEndMonIntervalES -- Counter, --gnHptFarEndMonIntervalSES -- Counter, gnHptFarEndMonIntervalBBE Gauge, gnHptFarEndMonIntervalUAS Gauge } gnHptFarEndMonIntervalIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96." ::= { gnHptFarEndMonIntervalEntry 1 } gnHptFarEndMonIntervalBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval." ::= { gnHptFarEndMonIntervalEntry 2} gnHptFarEndMonIntervalUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval." ::= { gnHptFarEndMonIntervalEntry 3} gnHptFarEndMonDayTable OBJECT-TYPE SYNTAX SEQUENCE OF GnHptFarEndMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the far end HPT part of the MUX per 24 hours interval." ::= { gnHptMon 6 } gnHptFarEndMonDayEntry OBJECT-TYPE SYNTAX GnHptFarEndMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the far end HPT part of the MUX Counters Table. This table contains an interface index for every interface which type is PATH(50, according to RFC1573). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30." INDEX { ifIndex, gnHptFarEndMonDayIdx} ::= { gnHptFarEndMonDayTable 1 } GnHptFarEndMonDayEntry ::= SEQUENCE { gnHptFarEndMonDayIdx INTEGER, gnHptFarEndMonDayES Gauge, gnHptFarEndMonDaySES Gauge, gnHptFarEndMonDayBBE Gauge, gnHptFarEndMonDayUAS Gauge } gnHptFarEndMonDayIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30." ::= { gnHptFarEndMonDayEntry 1 } gnHptFarEndMonDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Errored Seconds per interval of 24 hours." ::= { gnHptFarEndMonDayEntry 2} gnHptFarEndMonDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Severely Errored Seconds per interval of 24 hours." ::= { gnHptFarEndMonDayEntry 3} gnHptFarEndMonDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval of 24 hours." ::= { gnHptFarEndMonDayEntry 4 } gnHptFarEndMonDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval of 24 hours." ::= { gnHptFarEndMonDayEntry 5 } -- LPT part of the MUX. All LPT tables are included for future development -- and are not currently implemented. gnLptCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnLptCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the LPT part of the MUX." ::= { gnMux 10 } gnLptCfgEntry OBJECT-TYPE SYNTAX GnLptCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the LPT part of the MUX Configuration Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573)." INDEX { ifIndex } ::= { gnLptCfgTable 1 } GnLptCfgEntry ::= SEQUENCE { -- gnLptCfgTransmittedC2 -- INTEGER, -- gnLptCfgExpectedC2 -- INTEGER, -- gnLptCfgMismatchC2 -- INTEGER, -- gnLptCfgTransmittedJ1 -- DisplayString, -- gnLptCfgExpectedJ1 -- DisplayString, -- gnLptCfgMismatchJ1 -- INTEGER, gnLptCfgEXCThresh INTEGER, gnLptCfgSDThresh INTEGER } --gnLptCfgTransmittedC2 OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "This is the C2 byte that would be sent." -- DEFVAL { '02'H} -- ::= { gnLptCfgEntry 1 } --gnLptCfgExpectedC2 OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "This is the C2 byte that is expected to be received." -- DEFVAL { '02'H} -- ::= { gnLptCfgEntry 2 } --gnLptCfgMismatchC2 OBJECT-TYPE -- SYNTAX INTEGER{ -- sendAIS(2), -- doNotSendAIS(3) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " In case of C2 mismatch error, send or don't send AIS." -- DEFVAL { sendAIS } -- ::= { gnLptCfgEntry 3 } --gnLptCfgTransmittedJ1 OBJECT-TYPE -- SYNTAX DisplayString(SIZE(0..63)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "This is the J1 string that would be sent." -- DEFVAL { "" } -- ::= { gnLptCfgEntry 4 } --gnLptCfgExpectedJ1 OBJECT-TYPE -- SYNTAX DisplayString(SIZE(0..63)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "This is the J1 string that is expected to be received." -- DEFVAL { "" } -- ::= { gnLptCfgEntry 5 } --gnLptCfgMismatchJ1 OBJECT-TYPE -- SYNTAX INTEGER{ -- transparency(2), -- sendAlarm(3), -- sendAIS(4) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " In case of J1 mismatch error send or don't send AIS." -- DEFVAL { transparency } -- ::= { gnLptCfgEntry 6 } -- NOT IMPLEMENTED (access): gnLptCfgEXCThresh OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4) } ACCESS read-write STATUS mandatory DESCRIPTION " If the bit error rate is higher than this threshold an alarm would be generated. EXC is for excessive." DEFVAL { tenExpMinus3} ::= { gnLptCfgEntry 1 } gnLptCfgSDThresh OBJECT-TYPE SYNTAX INTEGER { tenExpMinus6(3), tenExpMinus7(4), tenExpMinus8(5), tenExpMinus9(6), notActive(15) } ACCESS read-write STATUS mandatory DESCRIPTION " If the bit error rate is higher than this threshold an alarm would be generated. SD is for Signal Degrade." DEFVAL { tenExpMinus6} ::= { gnLptCfgEntry 2 } gnLptStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnLptStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the status of the LPT part of the MUX." ::= { gnMux 11 } gnLptStatEntry OBJECT-TYPE SYNTAX GnLptStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the LPT part of the MUX Status Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573)." INDEX { ifIndex } ::= { gnLptStatTable 1 } GnLptStatEntry ::= SEQUENCE { gnLptStatReceivedJ2 DisplayString, gnLptStatStatus OCTET STRING, -- gnLptStatFarEndStatus -- OCTET STRING, gnLptStatProtectionMode INTEGER, gnLptStatCurrentBer INTEGER, gnLptStatFarEndCurrentBer INTEGER, gnLptStatReceivedSignalLabel OCTET STRING, gnLptStatKLM INTEGER } gnLptStatReceivedJ2 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the J2 string that was received." ::= { gnLptStatEntry 1 } gnLptStatStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "Alarm status byte. Bit 1 is MSB, bit=1 when alarm active. bit 4 = LOP bit 5 = RDI bit 6 = AIS bit 7 = TIM bit 8 = SLM/PLM bit 9 = SD bit 10 = EXC bit 12 = UNEQ" ::= { gnLptStatEntry 2 } --gnLptStatFarEndStatus OBJECT-TYPE -- SYNTAX OCTET STRING(SIZE(2)) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "bit 5 = RDI" -- ::= { gnLptStatEntry 3 } gnLptStatProtectionMode OBJECT-TYPE SYNTAX INTEGER { working(2), protect(3), passthrough(4), notActive(5) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnLptStatEntry 3 } gnLptStatCurrentBer OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnLptStatEntry 4 } gnLptStatFarEndCurrentBer OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnLptStatEntry 5 } gnLptStatReceivedSignalLabel OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "These are bits 1..3 of the V5 string that was received (bit 0 is the lsb)." ::= { gnLptStatEntry 6 } gnLptStatKLM OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnLptStatEntry 7 } gnLptMon OBJECT IDENTIFIER ::= { gnMux 12 } gnLptMonCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF GnLptMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the LPT part of the MUX." ::= { gnLptMon 1 } gnLptMonCurrEntry OBJECT-TYPE SYNTAX GnLptMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the LPT part of the MUX Counters Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573)." INDEX { ifIndex } ::= { gnLptMonCurrTable 1 } GnLptMonCurrEntry ::= SEQUENCE { --gnLptMonCurrES rfc1595 -- Counter, --gnLptMonCurrSES -- Counter, gnLptMonCurrBBE Gauge, gnLptMonCurrUAS Gauge, gnLptMonCurrLastDayES Gauge, gnLptMonCurrLastDaySES Gauge, gnLptMonCurrLastDayBBE Gauge, gnLptMonCurrLastDayUAS Gauge } gnLptMonCurrBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 15 minutes period." ::= { gnLptMonCurrEntry 1} gnLptMonCurrUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 15 minutes period." ::= { gnLptMonCurrEntry 2} gnLptMonCurrLastDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Errored Seconds starting from the present 24 hours period." ::= { gnLptMonCurrEntry 3 } gnLptMonCurrLastDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Severely Errored Seconds starting from the present 24 hours period." ::= { gnLptMonCurrEntry 4 } gnLptMonCurrLastDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 24 hours period." ::= { gnLptMonCurrEntry 5 } gnLptMonCurrLastDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 24 hours period." ::= { gnLptMonCurrEntry 6 } gnLptMonIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF GnLptMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the LPT part of the MUX per interval." ::= { gnLptMon 2 } gnLptMonIntervalEntry OBJECT-TYPE SYNTAX GnLptMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the LPT part of the MUX Counters Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96." INDEX { ifIndex, gnLptMonIntervalIdx} ::= { gnLptMonIntervalTable 1 } GnLptMonIntervalEntry ::= SEQUENCE { gnLptMonIntervalIdx INTEGER, --gnLptMonIntervalES -- Counter, --gnLptMonIntervalSES -- Counter, gnLptMonIntervalBBE Gauge, gnLptMonIntervalUAS Gauge } gnLptMonIntervalIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96." ::= { gnLptMonIntervalEntry 1 } gnLptMonIntervalBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval." ::= { gnLptMonIntervalEntry 2} gnLptMonIntervalUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval." ::= { gnLptMonIntervalEntry 3} gnLptMonDayTable OBJECT-TYPE SYNTAX SEQUENCE OF GnLptMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the LPT part of the MUX per 24 hours interval." ::= { gnLptMon 3 } gnLptMonDayEntry OBJECT-TYPE SYNTAX GnLptMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the LPT part of the MUX Counters Table. This table contains four groups of rows, indexed by ifIndex= 1,2 for local IDU and ifIndex = 101 and 102 for remote IDU. This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30." INDEX { ifIndex, gnLptMonDayIdx} ::= { gnLptMonDayTable 1 } GnLptMonDayEntry ::= SEQUENCE { gnLptMonDayIdx INTEGER, gnLptMonDayES Gauge, gnLptMonDaySES Gauge, gnLptMonDayBBE Gauge, gnLptMonDayUAS Gauge } gnLptMonDayIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30." ::= { gnLptMonDayEntry 1 } gnLptMonDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Errored Seconds per interval of 24 hours." ::= { gnLptMonDayEntry 2} gnLptMonDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Severely Errored Seconds per interval of 24 hours." ::= { gnLptMonDayEntry 3} gnLptMonDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval of 24 hours." ::= { gnLptMonDayEntry 4 } gnLptMonDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval of 24 hours." ::= { gnLptMonDayEntry 5 } gnLptFarEndMonCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF GnLptFarEndMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the far end LPT part of the MUX." ::= { gnLptMon 4 } gnLptFarEndMonCurrEntry OBJECT-TYPE SYNTAX GnLptFarEndMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the far end LPT part of the MUX Counters Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573)." INDEX { ifIndex } ::= { gnLptFarEndMonCurrTable 1 } GnLptFarEndMonCurrEntry ::= SEQUENCE { --gnLptFarEndMonCurrES rfc1595 -- Counter, --gnLptFarEndMonCurrSES -- Counter, gnLptFarEndMonCurrBBE Gauge, gnLptFarEndMonCurrUAS Gauge, gnLptFarEndMonCurrLastDayES Gauge, gnLptFarEndMonCurrLastDaySES Gauge, gnLptFarEndMonCurrLastDayBBE Gauge, gnLptFarEndMonCurrLastDayUAS Gauge } gnLptFarEndMonCurrBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 15 minutes period." ::= { gnLptFarEndMonCurrEntry 1} gnLptFarEndMonCurrUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 15 minutes period." ::= { gnLptFarEndMonCurrEntry 2} gnLptFarEndMonCurrLastDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Errored Seconds starting from the present 24 hours period." ::= { gnLptFarEndMonCurrEntry 3 } gnLptFarEndMonCurrLastDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Severely Errored Seconds starting from the present 24 hours period." ::= { gnLptFarEndMonCurrEntry 4 } gnLptFarEndMonCurrLastDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 24 hours period." ::= { gnLptFarEndMonCurrEntry 5 } gnLptFarEndMonCurrLastDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 24 hours period." ::= { gnLptFarEndMonCurrEntry 6 } gnLptFarEndMonIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF GnLptFarEndMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the far end LPT part of the MUX per interval." ::= { gnLptMon 5 } gnLptFarEndMonIntervalEntry OBJECT-TYPE SYNTAX GnLptFarEndMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the far end LPT part of the MUX Counters Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96." INDEX { ifIndex, gnLptFarEndMonIntervalIdx} ::= { gnLptFarEndMonIntervalTable 1 } GnLptFarEndMonIntervalEntry ::= SEQUENCE { gnLptFarEndMonIntervalIdx INTEGER, --gnLptFarEndMonIntervalES -- Counter, --gnLptFarEndMonIntervalSES -- Counter, gnLptFarEndMonIntervalBBE Gauge, gnLptFarEndMonIntervalUAS Gauge } gnLptFarEndMonIntervalIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96." ::= { gnLptFarEndMonIntervalEntry 1 } gnLptFarEndMonIntervalBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval." ::= { gnLptFarEndMonIntervalEntry 2} gnLptFarEndMonIntervalUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval." ::= { gnLptFarEndMonIntervalEntry 3} gnLptFarEndMonDayTable OBJECT-TYPE SYNTAX SEQUENCE OF GnLptFarEndMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the far end LPT part of the MUX per 24 hours interval." ::= { gnLptMon 6 } gnLptFarEndMonDayEntry OBJECT-TYPE SYNTAX GnLptFarEndMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the far end LPT part of the MUX Counters Table. This table contains an interface index for every interface which type is VT(51, according to RFC1573). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30." INDEX { ifIndex, gnLptFarEndMonDayIdx} ::= { gnLptFarEndMonDayTable 1 } GnLptFarEndMonDayEntry ::= SEQUENCE { gnLptFarEndMonDayIdx INTEGER, gnLptFarEndMonDayES Gauge, gnLptFarEndMonDaySES Gauge, gnLptFarEndMonDayBBE Gauge, gnLptFarEndMonDayUAS Gauge } gnLptFarEndMonDayIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30." ::= { gnLptFarEndMonDayEntry 1 } gnLptFarEndMonDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Errored Seconds per interval of 24 hours." ::= { gnLptFarEndMonDayEntry 2} gnLptFarEndMonDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Severely Errored Seconds per interval of 24 hours." ::= { gnLptFarEndMonDayEntry 3} gnLptFarEndMonDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval of 24 hours." ::= { gnLptFarEndMonDayEntry 4 } gnLptFarEndMonDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval of 24 hours." ::= { gnLptFarEndMonDayEntry 5 } gnMuxCfgXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMuxCfgXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the mux board." ::= { gnMux 13 } gnMuxCfgXEntry OBJECT-TYPE SYNTAX GnMuxCfgXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the mux configuration table." INDEX { gnMuxCfgXId } ::= { gnMuxCfgXTable 1 } GnMuxCfgXEntry ::= SEQUENCE { gnMuxCfgXId INTEGER, gnMuxCfgXWsAdmin INTEGER, gnMuxCfgXWsLoopback INTEGER, gnMuxCfgXHwReset INTEGER, gnMUXCfgXTempLicenseEnable INTEGER, gnMUXCfgXTempLicenseTimer INTEGER } gnMuxCfgXId OBJECT-TYPE SYNTAX INTEGER { mux1(3), mux2(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates which device is involved in the specific row." ::= { gnMuxCfgXEntry 1 } gnMuxCfgXWsAdmin OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable Disable drawer wayside channel " DEFVAL { enable } ::= { gnMuxCfgXEntry 2 } gnMuxCfgXWsLoopback OBJECT-TYPE SYNTAX INTEGER { noloopback(2), waySideLoop(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter controls the WAYSIDE channel loopback diagnostic operations." DEFVAL { noloopback } ::= { gnMuxCfgXEntry 3 } gnMuxCfgXHwReset OBJECT-TYPE SYNTAX INTEGER { noOperation(2), hwReset(3) } ACCESS read-write STATUS mandatory DESCRIPTION "hwReset - Hardware reset for mux board." DEFVAL { noOperation } ::= { gnMuxCfgXEntry 4 } gnMUXCfgXTempLicenseEnable OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3), notSupported(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Set temporary license enable or disable" DEFVAL { disable } ::= { gnMuxCfgXEntry 5 } gnMUXCfgXTempLicenseTimer OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the temporary license timer" DEFVAL { 0 } ::= { gnMuxCfgXEntry 6 } gnMuxStatXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnMuxStatXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the status of the mux board." ::= { gnMux 14 } gnMuxStatXEntry OBJECT-TYPE SYNTAX GnMuxStatXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the mux configuration table." INDEX { gnMuxStatXId } ::= { gnMuxStatXTable 1 } GnMuxStatXEntry ::= SEQUENCE { gnMuxStatXId INTEGER, gnMuxStatXMuxSerialNumber DisplayString, gnMuxStatXIfLeds OCTET STRING, gnMuxStatXNumOfIfOnClass1 INTEGER, gnMuxStatXNumOfIfOnClass2 INTEGER, gnMuxStatXNumOfIfOnClass3 INTEGER, gnMuxStatXAesAdmin INTEGER, gnMuxStatXMuxFWVer DisplayString, gnMuxStatXMuxFWPostVer DisplayString, gnMuxStatXBoardConnector INTEGER, gnMuxStatXBoardType INTEGER } gnMuxStatXId OBJECT-TYPE SYNTAX INTEGER { mux1(3), mux2(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates which device is involved in the specific row." ::= { gnMuxStatXEntry 1 } gnMuxStatXMuxSerialNumber OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the MUX serial number - up to 20 characters " ::= { gnMuxStatXEntry 2 } gnMuxStatXIfLeds OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "The status of the Interface LEDs. For the management station use. Each two bits represents one led as follows: 00 - Gray, 01 - Green, 10 - Orange, 11 - Red. The led order: Led1 is msb 2 bits , after it led2, till led 16 - 2 lsb bits." ::= { gnMuxStatXEntry 3 } gnMuxStatXNumOfIfOnClass1 OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the actual number of interfaces on class 1." DEFVAL { 0 } ::= { gnMuxStatXEntry 4 } gnMuxStatXNumOfIfOnClass2 OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the actual number of interfaces on class 2." DEFVAL { 0 } ::= { gnMuxStatXEntry 5 } gnMuxStatXNumOfIfOnClass3 OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the actual number of interfaces on class 3." DEFVAL { 0 } ::= { gnMuxStatXEntry 6 } gnMuxStatXAesAdmin OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3), notSupport(4), systemFailure(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter defines encryption admin mode." DEFVAL { disable } ::= { gnMuxStatXEntry 7 } gnMuxStatXMuxFWVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Mux firmware version." ::= { gnMuxStatXEntry 8 } gnMuxStatXMuxFWPostVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Mux post reset firmware version." ::= { gnMuxStatXEntry 9 } gnMuxStatXBoardConnector OBJECT-TYPE SYNTAX INTEGER { noInterface(2), oneElectricalSTM1(3), oneFiberSTM1SingleMode(4), oneFiberSTM1MultiMode(5), twoElectricalSTM1(6), twoFiberSTM1SingleMode(7), twoFiberSTM1MultiMode(8), oneFEOnly(9), oneFEplus4E1(10), oneFEplus8E1(11), oneFEplus4T1(12), oneFEplus8T1(13), twoFEOnly(14), twoFEplus4E1(15), twoFEplus8E1(16), twoFEplus4T1(17), twoFEplus8T1(18), oneDS3(19), threeDS3(20), oneE3(21), threeE3(22), oneOpticalGBEOnly(23), oneOpticalGBEPlus8E1(24), oneOpticalGBEPlus8T1(25), oneElectricalGBEOnly(26), oneElectricalGBEPlus8E1(27), oneElectricalGBEPlus8T1(28), oneFEplus64E1(29), oneFEplus64T1(30), eightE1Only(31), eightT1Only(32), oneStm1XC(33), twoStm1XC(34) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter defines the connector of the mux board, for NMS use." DEFVAL { noInterface } ::= { gnMuxStatXEntry 10 } gnMuxStatXBoardType OBJECT-TYPE SYNTAX INTEGER { v1(2), -- phos v2(3), -- summit v3(4), -- avalon v4(5), -- phoenix v5(6), -- GBE Electric board v6(7) -- Calisto FE board } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter defines the type of the mux." DEFVAL { v1 } ::= { gnMuxStatXEntry 11 } -- This group contains the parameters concerning the AUX gnAux OBJECT IDENTIFIER ::= { gnIDU 4 } gnAuxGeneral OBJECT IDENTIFIER ::= { gnAux 1 } gnAuxGeneralTable OBJECT-TYPE SYNTAX SEQUENCE OF GnAuxGeneralEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the commands of the Auxiliary channel." ::= {gnAuxGeneral 1} gnAuxGeneralEntry OBJECT-TYPE SYNTAX GnAuxGeneralEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Auxiliary channel command Table." INDEX {gnAuxGeneralId} ::= {gnAuxGeneralTable 1} GnAuxGeneralEntry ::= SEQUENCE { gnAuxGeneralId INTEGER, gnAuxGeneralSyncIdcDataBase INTEGER } gnAuxGeneralId OBJECT-TYPE SYNTAX INTEGER { local(1) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnAuxGeneralEntry 1 } gnAuxGeneralSyncIdcDataBase OBJECT-TYPE SYNTAX INTEGER { noOperation(2), auxToIdc(3), idcToAux(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter synchronize between hardware and data base of auxiliary channel." DEFVAL { noOperation } ::= { gnAuxGeneralEntry 2 } gnWsc OBJECT IDENTIFIER ::= { gnAux 2 } gnWscCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnWscCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the Wayside channel." ::= { gnWsc 1 } gnWscCfgEntry OBJECT-TYPE SYNTAX GnWscCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Wayside channel part of the AUX Configuration Table." INDEX {gnWscCfgId, gnWscCfgChNumber} ::= { gnWscCfgTable 1 } GnWscCfgEntry ::= SEQUENCE { gnWscCfgId INTEGER, gnWscCfgChNumber INTEGER, gnWscCfgRouting INTEGER, gnWscCfgEnable INTEGER, gnWscCfgBitRate INTEGER, gnWscCfgType INTEGER } gnWscCfgId OBJECT-TYPE SYNTAX INTEGER { local(1) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnWscCfgEntry 1 } gnWscCfgChNumber OBJECT-TYPE SYNTAX INTEGER { channel1(1), channel2(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Wayside channel number." ::= { gnWscCfgEntry 2 } gnWscCfgRouting OBJECT-TYPE SYNTAX INTEGER { drawer1(2), drawer2(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Wayside channel routing." DEFVAL { drawer1 } ::= { gnWscCfgEntry 3 } gnWscCfgEnable OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Wayside channel enable\disable." DEFVAL { enable } ::= { gnWscCfgEntry 4 } gnWscCfgBitRate OBJECT-TYPE SYNTAX INTEGER { low(2), high(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Wayside channel bit rate." DEFVAL { low } ::= { gnWscCfgEntry 5 } gnWscCfgType OBJECT-TYPE SYNTAX INTEGER { e1(2), t1(3), fastEthernet(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Wayside channel bit rate." DEFVAL { e1 } ::= { gnWscCfgEntry 6 } gnWscStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnWscStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the status of the Wayside channel." ::= { gnWsc 2 } gnWscStatEntry OBJECT-TYPE SYNTAX GnWscStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Wayside channel part of the AUX Status Table." INDEX {gnWscStatId, gnWscStatChNumber} ::= { gnWscStatTable 1 } GnWscStatEntry ::= SEQUENCE { gnWscStatId INTEGER, gnWscStatChNumber INTEGER, gnWscStatBitRateSupport INTEGER } gnWscStatId OBJECT-TYPE SYNTAX INTEGER { local(1) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnWscStatEntry 1 } gnWscStatChNumber OBJECT-TYPE SYNTAX INTEGER { channel1(1), channel2(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Wayside channel number." ::= { gnWscStatEntry 2 } gnWscStatBitRateSupport OBJECT-TYPE SYNTAX INTEGER { supported(2), notSupported(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication for Wayside channel bit rate support." DEFVAL { notSupported } ::= {gnWscStatEntry 3} gnEow OBJECT IDENTIFIER ::= { gnAux 3 } gnEowCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnEowCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the EOW." ::= { gnEow 1 } gnEowCfgEntry OBJECT-TYPE SYNTAX GnEowCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the EOW configuration Table." INDEX {gnEowCfgId} ::= { gnEowCfgTable 1 } GnEowCfgEntry ::= SEQUENCE { gnEowCfgId INTEGER, gnEowCfgEowLeftEnable INTEGER, gnEowCfgEowRightEnable INTEGER, gnEowCfgEowCascadeEnable INTEGER } gnEowCfgId OBJECT-TYPE SYNTAX INTEGER { local(1) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnEowCfgEntry 1 } gnEowCfgEowLeftEnable OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "EOW enable\disable." DEFVAL { enable } ::= { gnEowCfgEntry 2 } gnEowCfgEowRightEnable OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "EOW enable\disable." DEFVAL { enable } ::= { gnEowCfgEntry 3 } gnEowCfgEowCascadeEnable OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "EOW cascade enable\disable." DEFVAL { disable } ::= { gnEowCfgEntry 4 } gnEowStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnEowStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the status of the EOW." ::= { gnEow 2 } gnEowStatEntry OBJECT-TYPE SYNTAX GnEowStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the EOW status Table." INDEX {gnEowStatId} ::= { gnEowStatTable 1 } GnEowStatEntry ::= SEQUENCE { gnEowStatId INTEGER, gnEowStatEowLeftSupport INTEGER, gnEowStatEowRightSupport INTEGER } gnEowStatId OBJECT-TYPE SYNTAX INTEGER { local(1) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnEowStatEntry 1 } gnEowStatEowLeftSupport OBJECT-TYPE SYNTAX INTEGER { supported(2), notSupported(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication for EOW support." DEFVAL { supported } ::= {gnEowStatEntry 2} gnEowStatEowRightSupport OBJECT-TYPE SYNTAX INTEGER { supported(2), notSupported(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication for EOW support." DEFVAL { supported } ::= {gnEowStatEntry 3} gnUc OBJECT IDENTIFIER ::= { gnAux 4 } gnUcCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnUcCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the User channel." ::= { gnUc 1 } gnUcCfgEntry OBJECT-TYPE SYNTAX GnUcCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the User channel part of the AUX Configuration Table." INDEX {gnUcCfgId, gnUcCfgChNumber} ::= { gnUcCfgTable 1 } GnUcCfgEntry ::= SEQUENCE { gnUcCfgId INTEGER, gnUcCfgChNumber INTEGER, gnUcCfgRouting INTEGER, gnUcCfgEnable INTEGER, gnUcCfgType INTEGER, gnUcCfgLoopback INTEGER } gnUcCfgId OBJECT-TYPE SYNTAX INTEGER { local(1) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnUcCfgEntry 1 } gnUcCfgChNumber OBJECT-TYPE SYNTAX INTEGER { channel1(1), channel2(2) } ACCESS read-only STATUS mandatory DESCRIPTION "User channel number." ::= { gnUcCfgEntry 2 } gnUcCfgRouting OBJECT-TYPE SYNTAX INTEGER { drawer1(2), drawer2(3) } ACCESS read-write STATUS mandatory DESCRIPTION "User channel routing." DEFVAL { drawer1 } ::= { gnUcCfgEntry 3 } gnUcCfgEnable OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "User channel enable\disable." DEFVAL { disable } ::= { gnUcCfgEntry 4 } gnUcCfgType OBJECT-TYPE SYNTAX INTEGER { v11Asyn(2), rs232(3), v11SynCoDirectional(4), v11SynContraDirectional(5), ethernet(6) } ACCESS read-write STATUS mandatory DESCRIPTION "User channel protocol type." DEFVAL { v11Asyn } ::= { gnUcCfgEntry 5 } gnUcCfgLoopback OBJECT-TYPE SYNTAX INTEGER { none(2), line(3) } ACCESS read-write STATUS mandatory DESCRIPTION "User channel loopback activation." DEFVAL { none } ::= { gnUcCfgEntry 6 } gnUcStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnUcStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the status of the user channel." ::= { gnUc 2 } gnUcStatEntry OBJECT-TYPE SYNTAX GnUcStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the user channel status Table." INDEX {gnUcStatId} ::= { gnUcStatTable 1 } GnUcStatEntry ::= SEQUENCE { gnUcStatId INTEGER, gnUcStatLeftMaxRouteChannel INTEGER, gnUcStatRightMaxRouteChannel INTEGER } gnUcStatId OBJECT-TYPE SYNTAX INTEGER { local(1) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnUcStatEntry 1 } gnUcStatLeftMaxRouteChannel OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Indication for NMS on the number of channels the right radio can passthrough." DEFVAL { 2 } ::= {gnUcStatEntry 2} gnUcStatRightMaxRouteChannel OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Indication for NMS on the number of channels the right radio can passthrough." DEFVAL { 2 } ::= {gnUcStatEntry 3} -- ///// Protect start //////// gnProtect OBJECT IDENTIFIER ::= { gnUnits 3 } gnProtectCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnProtectCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains protection switch configuration per device; local and remote." ::= { gnProtect 1 } gnProtectCfgEntry OBJECT-TYPE SYNTAX GnProtectCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { gnProtectCfgId } ::= { gnProtectCfgTable 1 } GnProtectCfgEntry ::= SEQUENCE { gnProtectCfgId INTEGER, gnProtectCfgSwitchRequest INTEGER, gnProtectCfgBERSwitch INTEGER, gnProtectCfgExtInSwitch INTEGER, gnProtectCfgOption OCTET STRING, gnProtectCfgUserCommand INTEGER, gnProtectCfgType INTEGER, gnProtectCfgProtectionLockout INTEGER, gnProtectCfgSdBERSwitch INTEGER, gnProtectCfgMultiRadioBlock INTEGER } gnProtectCfgId OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } ACCESS read-only STATUS mandatory DESCRIPTION " This value indicates which device is involved in the specific row." ::= { gnProtectCfgEntry 1 } gnProtectCfgSwitchRequest OBJECT-TYPE SYNTAX INTEGER { noAction(2), userSwitchRequest(3), userForceSwitch(4) } ACCESS read-write STATUS mandatory DESCRIPTION " Protection user switch request. " DEFVAL { noAction } ::= { gnProtectCfgEntry 2 } gnProtectCfgBERSwitch OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable or disable automatic switch as a result of BER condition. " DEFVAL { enable } ::= { gnProtectCfgEntry 3 } gnProtectCfgExtInSwitch OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable or disable automatic switch as a result of alarm on External Input No. 8. " DEFVAL { enable } ::= { gnProtectCfgEntry 4 } gnProtectCfgOption OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-write STATUS mandatory DESCRIPTION " bit 8 (lsb) = dual fiber input. bit 7 = protection disable bit 4 = 0 (default) for External protection ; 1 for Internal protection (between the drawers) bit 3 = 0 (default) for Full protection ; 1 for Radio protection. " ::= { gnProtectCfgEntry 5 } gnProtectCfgUserCommand OBJECT-TYPE SYNTAX INTEGER { noAction(2), copyConfToMate(3), copyLeftConfToRight(4), -- No Drawer number use right and left copyRightConfToLeft(5) } ACCESS read-write STATUS mandatory DESCRIPTION " Copy All the configuration that should be equal in master and slave. The copy is made from the current unit to it's mate/Left drawer to right drawer or right drawer to left drawer." DEFVAL { noAction } ::= { gnProtectCfgEntry 6 } gnProtectCfgType OBJECT-TYPE SYNTAX INTEGER { none(2), internal(3), external(4), externalInternal(5), multiRadioWithoutLineProtection(6), multiRadioWithLineProtection(7) } ACCESS read-write STATUS mandatory DESCRIPTION " ." DEFVAL { none } ::= { gnProtectCfgEntry 7 } gnProtectCfgProtectionLockout OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } ACCESS read-write STATUS mandatory DESCRIPTION " ." DEFVAL { off } ::= { gnProtectCfgEntry 8 } gnProtectCfgSdBERSwitch OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable or disable automatic switch as a result of signal degrade BER condition. " DEFVAL { enable } ::= { gnProtectCfgEntry 9 } gnProtectCfgMultiRadioBlock OBJECT-TYPE SYNTAX INTEGER { unblock(2), blockLeft(3), blockRight(4), blockBoth(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Block\un block radio in multi radio protection configuration only." DEFVAL { unblock } ::= { gnProtectCfgEntry 10 } gnProtectUnitMode OBJECT-TYPE SYNTAX INTEGER { slave(2), master(3) } ACCESS read-only STATUS mandatory DESCRIPTION " This parameter indicates the unit mode: Master of Slave." DEFVAL { slave } ::= { gnProtect 2 } gnHitLessCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnHitLessCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains hitless configuration per device; local and remote." ::= { gnProtect 3 } gnHitLessCfgEntry OBJECT-TYPE SYNTAX GnHitLessCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { gnHitLessCfgId } ::= { gnHitLessCfgTable 1 } GnHitLessCfgEntry ::= SEQUENCE { gnHitLessCfgId INTEGER, gnHitLessCfgSwitchEnable INTEGER, gnHitLessCfgDiversityType INTEGER, gnHitLessCfgSwitchingMode INTEGER, gnHitLessCfgRevertTime INTEGER, gnHitLessCfgManualSwitch INTEGER, gnHitLessCfgEventCounterCommand INTEGER, gnHitLessCfgSwitchLock INTEGER } gnHitLessCfgId OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2), drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " This value indicates which device is involved in the specific row." ::= { gnHitLessCfgEntry 1 } gnHitLessCfgSwitchEnable OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable or disable the Hitless feature." DEFVAL { enable } ::= { gnHitLessCfgEntry 2 } gnHitLessCfgDiversityType OBJECT-TYPE SYNTAX INTEGER { space(2), frequency(3), none(4) } ACCESS read-write STATUS mandatory DESCRIPTION " Is the hitless feature working in space diversity mode or in frequency diversity mode." DEFVAL { space } ::= { gnHitLessCfgEntry 3 } gnHitLessCfgSwitchingMode OBJECT-TYPE SYNTAX INTEGER { revertive(2), nonRevertive(3) } ACCESS read-write STATUS mandatory DESCRIPTION " " DEFVAL { revertive } ::= { gnHitLessCfgEntry 4 } gnHitLessCfgRevertTime OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION " This parameter indicates the revert time in seconds. Possible values: 0..15." DEFVAL { 0 } ::= { gnHitLessCfgEntry 5 } gnHitLessCfgManualSwitch OBJECT-TYPE SYNTAX INTEGER { noAction(2), activate(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Force manually switch between the hitless modems." DEFVAL { noAction } ::= { gnHitLessCfgEntry 6 } gnHitLessCfgEventCounterCommand OBJECT-TYPE SYNTAX INTEGER { noAction(2), clearCounter(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Clears the gnHitLessStatEventCounter." DEFVAL { noAction } ::= { gnHitLessCfgEntry 7 } gnHitLessCfgSwitchLock OBJECT-TYPE SYNTAX INTEGER { off(2), left(3), right(4), self(5), mate(6) } ACCESS read-write STATUS mandatory DESCRIPTION " ." DEFVAL { off } ::= { gnHitLessCfgEntry 8 } gnHitLessStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnHitLessStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains hitless status per device; local and remote." ::= { gnProtect 4 } gnHitLessStatEntry OBJECT-TYPE SYNTAX GnHitLessStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { gnHitLessStatId } ::= { gnHitLessStatTable 1 } GnHitLessStatEntry ::= SEQUENCE { gnHitLessStatId INTEGER, gnHitLessStatReceiverStatus INTEGER, gnHitLessStatModeStatus INTEGER, gnHitLessStatEventCounter INTEGER, gnHitLessStatAlarmStatus OCTET STRING } gnHitLessStatId OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2), drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " This value indicates which device is involved in the specific row." ::= { gnHitLessStatEntry 1 } gnHitLessStatReceiverStatus OBJECT-TYPE SYNTAX INTEGER { local(2), mate(3), leftRadio(4), rightRadio(5) } ACCESS read-only STATUS mandatory DESCRIPTION " This parameter indicates which Modem is active: the Local or the mate." DEFVAL { local } ::= { gnHitLessStatEntry 2 } gnHitLessStatModeStatus OBJECT-TYPE SYNTAX INTEGER { hitlessOK(2), hitlessFailure(3) } ACCESS read-only STATUS mandatory DESCRIPTION " This parameter indicates if the Hitless system is working properly." DEFVAL { hitlessFailure } ::= { gnHitLessStatEntry 3 } gnHitLessStatEventCounter OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION " This counter counts the number of hitless switch events." DEFVAL { 0 } ::= { gnHitLessStatEntry 4 } gnHitLessStatAlarmStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION " bit 1 represent the MSB bits 1-7 are not in use bit 8 : Switch lock to right. bit 9 : Switch lock to left. bit 10: Protection config mismatch. bit 11: Diversity config mismatch. bit 12: Unused radio LOF. bit 13: Hitless Functionality Failure. bit 14: Hitless Cable Disconnect. bit 15: Hitless Mate LOF. bit 16: Hitless Primary Radio LOF. " ::= { gnHitLessStatEntry 5 } gnTribStmProtectCfg OBJECT IDENTIFIER ::= { gnProtect 5} gnTribStmProtectType OBJECT-TYPE SYNTAX INTEGER { none(2), msp(3), sncp(4) } ACCESS read-write STATUS mandatory DESCRIPTION "." DEFVAL { none } ::= { gnTribStmProtectCfg 1 } gnTribStmMspConnect OBJECT-TYPE SYNTAX INTEGER { dualTribConnect(2), singleTribConnect(3) } ACCESS read-write STATUS mandatory DESCRIPTION "." DEFVAL { dualTribConnect } ::= { gnTribStmProtectCfg 2 } gnTribStmMspType OBJECT-TYPE SYNTAX INTEGER { uniDirectional(2), biDirectional(3) } ACCESS read-write STATUS mandatory DESCRIPTION "." DEFVAL { uniDirectional } ::= { gnTribStmProtectCfg 3 } gnTribStmMspRevertiveMode OBJECT-TYPE SYNTAX INTEGER { nonRevertive(2), revertive(3) } ACCESS read-write STATUS mandatory DESCRIPTION "." DEFVAL { nonRevertive } ::= { gnTribStmProtectCfg 4 } gnTribStmMspProtectRole OBJECT-TYPE SYNTAX INTEGER { main(2), standBy(3) } ACCESS read-write STATUS mandatory DESCRIPTION "." ::= { gnTribStmProtectCfg 5 } gnTribStmMspWaitToRestoreTime OBJECT-TYPE SYNTAX INTEGER (5..12) ACCESS read-write STATUS mandatory DESCRIPTION "This is the wait-to-restore time in minutes. Possible values: 5..12. " DEFVAL {5} ::= { gnTribStmProtectCfg 6 } gnTribStmMspUserCommand OBJECT-TYPE SYNTAX INTEGER { clear(2), lockOut(3), forceSwitch(4), manualSwitch(5), exercise(6) } ACCESS read-write STATUS mandatory DESCRIPTION "." DEFVAL { clear } ::= { gnTribStmProtectCfg 7 } gnTribStmProtectStat OBJECT IDENTIFIER ::= { gnProtect 6} gnTribStmProtectCurrentState OBJECT-TYPE SYNTAX INTEGER { working(2), protecting(3) } ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { gnTribStmProtectStat 1 } gnTribStmProtectCableStatus OBJECT-TYPE SYNTAX INTEGER { ok(2), fault(3) } ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { gnTribStmProtectStat 2 } gnProtectXTable OBJECT-TYPE SYNTAX SEQUENCE OF GnProtectXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { gnProtect 7 } gnProtectXEntry OBJECT-TYPE SYNTAX GnProtectXEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { gnProtectXId } ::= { gnProtectXTable 1 } GnProtectXEntry ::= SEQUENCE { gnProtectXId INTEGER, gnProtectXProtectUnitMode INTEGER, gnProtectXMultiRadioOhRadioSource INTEGER } gnProtectXId OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnProtectXEntry 1 } gnProtectXProtectUnitMode OBJECT-TYPE SYNTAX INTEGER { slave(2), master(3) } ACCESS read-only STATUS mandatory DESCRIPTION " This parameter indicates the unit mode: Master of Slave." DEFVAL { slave } ::= { gnProtectXEntry 2 } gnProtectXMultiRadioOhRadioSource OBJECT-TYPE SYNTAX INTEGER { drawer1(3), drawer2(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter indicates the radio source of the OH in multi radio configuration merely." DEFVAL { drawer1 } ::= { gnProtectXEntry 3 } gnLinkGroups OBJECT IDENTIFIER ::= { gnProtect 8 } topologiesOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TopologiesOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the Topologies options." ::= { gnLinkGroups 1 } topologiesOptionsEntry OBJECT-TYPE SYNTAX TopologiesOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the Topologies options." INDEX { topologiesOptionsGroupTopology} ::= { topologiesOptionsTable 1 } TopologiesOptionsEntry ::= SEQUENCE { topologiesOptionsGroupTopology INTEGER (1), topologiesOptionsMembersCarriers INTEGER (1), topologiesOptionsProtectingCarriers INTEGER (1), topologiesOptionsName DisplayString (SIZE(0..20)) } topologiesOptionsGroupTopology OBJECT-TYPE SYNTAX INTEGER (1) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates a bitmap : ---------------------------------------- | 15..12 | 11...........8 | 7........0 | | Set Id | Group Topology | Group Size | ---------------------------------------" ::= { topologiesOptionsEntry 1 } topologiesOptionsMembersCarriers OBJECT-TYPE SYNTAX INTEGER (1) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates a bitmap, LSB = carrier #1, #2..... " ::= { topologiesOptionsEntry 2 } topologiesOptionsProtectingCarriers OBJECT-TYPE SYNTAX INTEGER (1) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates a bitmap, LSB = carrier #1, #2..... " ::= { topologiesOptionsEntry 3 } topologiesOptionsName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the name of the topology, HSB 1:1, Stand Alone, 2+1.... " ::= { topologiesOptionsEntry 4 } linkGroupingTable OBJECT-TYPE SYNTAX SEQUENCE OF LinkGroupingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the link grouping." ::= { gnLinkGroups 2 } linkGroupingEntry OBJECT-TYPE SYNTAX LinkGroupingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the link grouping." INDEX { linkGroupingGroupId} ::= { linkGroupingTable 1 } LinkGroupingEntry ::= SEQUENCE { linkGroupingGroupId INTEGER (1..4), linkGroupingGroupAdmin INTEGER, linkGroupingGroupTopology INTEGER, linkGroupingExtraTrafficAdmin INTEGER, linkGroupingGroupName DisplayString (SIZE(0..40)) } linkGroupingGroupId OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the group id " ::= { linkGroupingEntry 1 } linkGroupingGroupAdmin OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the groups admin " ::= { linkGroupingEntry 2 } linkGroupingGroupTopology OBJECT-TYPE SYNTAX INTEGER { topologyhsb1-1(1), -- topologyhsb2-2(2), topologystandalone(256), topology1plus1(513), topology2plus1(514), topology3plus1(515), topology4plus1(516), topology5plus1(517), topology6plus1(518), topology7plus1(519), topology8plus1(520), topology9plus1(521) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates a bitmap : ---------------------------------------- | 15..12 | 11...........8 | 7........0 | | Set Id | Group Topology | Group Size | ---------------------------------------" ::= { linkGroupingEntry 3 } linkGroupingExtraTrafficAdmin OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the ET admin " ::= { linkGroupingEntry 4 } linkGroupingGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the groups name. " ::= { linkGroupingEntry 5 } protectionTable OBJECT-TYPE SYNTAX SEQUENCE OF ProtectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the link grouping protection." ::= { gnLinkGroups 3 } protectionEntry OBJECT-TYPE SYNTAX ProtectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the link grouping protection." INDEX { protectionGroupId} ::= { protectionTable 1 } ProtectionEntry ::= SEQUENCE { protectionGroupId INTEGER (1..4), protectionGroupsProtectionAdmin INTEGER, protectionNplus1ProtectionMethod INTEGER, protectionProtectingCarrierId INTEGER (0..15) } protectionGroupId OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the group id. " ::= { protectionEntry 1 } protectionGroupsProtectionAdmin OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the groups protection admin. " ::= { protectionEntry 2 } protectionNplus1ProtectionMethod OBJECT-TYPE SYNTAX INTEGER { standard(2), advanced(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the N+1 protection method. " ::= { protectionEntry 3 } protectionProtectingCarrierId OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the carrier id. " ::= { protectionEntry 4 } standardProtectionTable OBJECT-TYPE SYNTAX SEQUENCE OF StandardProtectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the link grouping standard protection." ::= { gnLinkGroups 4 } standardProtectionEntry OBJECT-TYPE SYNTAX StandardProtectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the link grouping standard protection." INDEX { standardProtectionGroupId} ::= { standardProtectionTable 1 } StandardProtectionEntry ::= SEQUENCE { standardProtectionGroupId INTEGER (1..4), standardProtectionSwitchOnEarlyWarning INTEGER, standardProtectionHighPrioProtectionTh INTEGER, standardProtectionRevertiveLink INTEGER, standardProtectionRevertiveSwitchTimeOut INTEGER (1..15) } standardProtectionGroupId OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the group id. " ::= { standardProtectionEntry 1 } standardProtectionSwitchOnEarlyWarning OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates switch on early warning. " ::= { standardProtectionEntry 2 } standardProtectionHighPrioProtectionTh OBJECT-TYPE SYNTAX INTEGER { bblof(4), bbexb(5), bbsd(6), ew(7) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the high priority protection. " ::= { standardProtectionEntry 3 } standardProtectionRevertiveLink OBJECT-TYPE SYNTAX INTEGER { carrier1(1), carrier2(2), carrier3(3), carrier4(4), carrier5(5), carrier6(6), carrier7(7), carrier8(8), carrier9(9), carrier10(10), carrier11(11), carrier12(12), carrier13(13), carrier14(14), carrier15(15), extraTraffic(256), none(257) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the revertive link. " ::= { standardProtectionEntry 4 } standardProtectionRevertiveSwitchTimeOut OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the revertive switch time out. " ::= { standardProtectionEntry 5 } membersTable OBJECT-TYPE SYNTAX SEQUENCE OF MembersEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the link groups members." ::= { gnLinkGroups 5 } membersEntry OBJECT-TYPE SYNTAX MembersEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the link groups members." INDEX { membersGroupId, membersCarrierId} ::= { membersTable 1 } MembersEntry ::= SEQUENCE { membersGroupId INTEGER (1..4), membersCarrierId INTEGER (1..15), membersProtectionPriorityLevel INTEGER } membersGroupId OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the group id. " ::= { membersEntry 1 } membersCarrierId OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the carrier id. " ::= { membersEntry 2 } membersProtectionPriorityLevel OBJECT-TYPE SYNTAX INTEGER { void(2), normal(3), high(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the protection priority level. " ::= { membersEntry 3 } nplus1ProtectingTable OBJECT-TYPE SYNTAX SEQUENCE OF Nplus1ProtectingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the link group N+1 protecting." ::= { gnLinkGroups 6 } nplus1ProtectingEntry OBJECT-TYPE SYNTAX Nplus1ProtectingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the link group N+1 protecting." INDEX { nplus1ProtectingGroupId} ::= { nplus1ProtectingTable 1 } Nplus1ProtectingEntry ::= SEQUENCE { nplus1ProtectingGroupId INTEGER (1..4), nplus1ProtectingXCProtectionFraming INTEGER, nplus1ProtectingProtectedLinkTx INTEGER (0..15), nplus1ProtectingProtectedLinkRx INTEGER (0..15), nplus1ProtectingRequestedLinkTx INTEGER (0..15), nplus1ProtectingRequestedLinkRx INTEGER (0..15), nplus1ProtectingSwitchToProtectingCommand INTEGER } nplus1ProtectingGroupId OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the group id. " ::= { nplus1ProtectingEntry 1 } nplus1ProtectingXCProtectionFraming OBJECT-TYPE SYNTAX INTEGER { na(2), lof(3), noPeer(4), clear(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the XC protecting framing. " ::= { nplus1ProtectingEntry 2 } nplus1ProtectingProtectedLinkTx OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the last known carrier num. 0 means no carrier." ::= { nplus1ProtectingEntry 3 } nplus1ProtectingProtectedLinkRx OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the last known carrier num. 0 means no carrier." ::= { nplus1ProtectingEntry 4 } nplus1ProtectingRequestedLinkTx OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the last known carrier num. 0 means no carrier." ::= { nplus1ProtectingEntry 5 } nplus1ProtectingRequestedLinkRx OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the last known carrier num. 0 means no carrier." ::= { nplus1ProtectingEntry 6 } nplus1ProtectingSwitchToProtectingCommand OBJECT-TYPE SYNTAX INTEGER { noaction(256), lockout(512), force1(769), force2(770), force3(771), force4(772), force5(773), force6(774), force7(775), force8(776), force9(777), force10(778), force11(779), force12(780), force13(781), force14(782), force15(783), request1(1025), request2(1026), request3(1027), request4(1028), request5(1029), request6(1030), request7(1031), request8(1032), request9(1033), request10(1034), request11(1035), request12(1036), request13(1037), request14(1038), request15(1039) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the switch to protecting command. The force switch command is Bi-directional." ::= { nplus1ProtectingEntry 7 } carrierProtectionTable OBJECT-TYPE SYNTAX SEQUENCE OF CarrierProtectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the carrier protection." ::= { gnLinkGroups 7 } carrierProtectionEntry OBJECT-TYPE SYNTAX CarrierProtectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the carrier protection." INDEX { carrierProtectionXCId, carrierProtectionCarrierId} ::= { carrierProtectionTable 1 } CarrierProtectionEntry ::= SEQUENCE { carrierProtectionXCId INTEGER (1..6), carrierProtectionCarrierId INTEGER (1..15), carrierProtectionLinkGroupNum INTEGER, carrierProtectionServedByRemoteXC INTEGER, carrierProtectionRadioStatus INTEGER, carrierProtectionLineFraming INTEGER, carrierProtectionLoopback INTEGER, carrierProtectionLoopbackTimer INTEGER (0..1440) } carrierProtectionXCId OBJECT-TYPE SYNTAX INTEGER (1..6) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the XC id. " ::= { carrierProtectionEntry 1 } carrierProtectionCarrierId OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the carrier id. " ::= { carrierProtectionEntry 2 } carrierProtectionLinkGroupNum OBJECT-TYPE SYNTAX INTEGER { standalone(2), group1(3), group2(4), group3(5), group4(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the link group number. " ::= { carrierProtectionEntry 3 } carrierProtectionServedByRemoteXC OBJECT-TYPE SYNTAX INTEGER { na(2), yes(3), no(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates whether served by remote XC. " ::= { carrierProtectionEntry 4 } carrierProtectionRadioStatus OBJECT-TYPE SYNTAX INTEGER { na(2), off(3), bblof(4), bbexb(5), bbsd(6), ew(7), clear(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the radio status. " ::= { carrierProtectionEntry 5 } carrierProtectionLineFraming OBJECT-TYPE SYNTAX INTEGER { na(2), lof(3), clear(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the line framing. " ::= { carrierProtectionEntry 6 } carrierProtectionLoopback OBJECT-TYPE SYNTAX INTEGER { none(3), external(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the loopback. " ::= { carrierProtectionEntry 7 } carrierProtectionLoopbackTimer OBJECT-TYPE SYNTAX INTEGER (0..1440) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the remaining time (in minutes) till the loopback timer will be expired. " ::= { carrierProtectionEntry 8 } nplus1StandardPMCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF Nplus1StandardPMCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the standard PM current." ::= { gnLinkGroups 8 } nplus1StandardPMCurrEntry OBJECT-TYPE SYNTAX Nplus1StandardPMCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the standard PM current." INDEX { nplus1StandardPMCurrCarrierId} ::= { nplus1StandardPMCurrTable 1 } Nplus1StandardPMCurrEntry ::= SEQUENCE { nplus1StandardPMCurrCarrierId INTEGER (1..15), nplus1StandardPMCurrTimeElapsed INTEGER (1..900), nplus1StandardPMCurrValidIntervals INTEGER (1..96), nplus1StandardPMCurrLastDayIDF INTEGER, nplus1StandardPMCurrLastDayGroupNum INTEGER(-1..4), nplus1StandardPMCurrPSAC Gauge, nplus1StandardPMCurrFSRC Gauge, nplus1StandardPMCurrPSAD Gauge, nplus1StandardPMCurrFSRD Gauge, nplus1StandardPMCurrLastDayPSAC Gauge, nplus1StandardPMCurrLastDayFSRC Gauge, nplus1StandardPMCurrLastDayPSAD Gauge, nplus1StandardPMCurrLastDayFSRD Gauge } nplus1StandardPMCurrCarrierId OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the carrier id. " ::= { nplus1StandardPMCurrEntry 1 } nplus1StandardPMCurrTimeElapsed OBJECT-TYPE SYNTAX INTEGER (1..900) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the time that elapsed. " ::= { nplus1StandardPMCurrEntry 2 } nplus1StandardPMCurrValidIntervals OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the valid intervals. " ::= { nplus1StandardPMCurrEntry 3 } nplus1StandardPMCurrLastDayIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the carrier id. " ::= { nplus1StandardPMCurrEntry 4 } nplus1StandardPMCurrLastDayGroupNum OBJECT-TYPE SYNTAX INTEGER (-1..4) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the group's number. " ::= { nplus1StandardPMCurrEntry 5 } nplus1StandardPMCurrPSAC OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the PSAC value. " ::= { nplus1StandardPMCurrEntry 6 } nplus1StandardPMCurrFSRC OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the FSRC value. " ::= { nplus1StandardPMCurrEntry 7 } nplus1StandardPMCurrPSAD OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the PSAD value. " ::= { nplus1StandardPMCurrEntry 8 } nplus1StandardPMCurrFSRD OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the FSRD value. " ::= { nplus1StandardPMCurrEntry 9 } nplus1StandardPMCurrLastDayPSAC OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the last Day PSAC value. " ::= { nplus1StandardPMCurrEntry 10 } nplus1StandardPMCurrLastDayFSRC OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the last Day FSRC value. " ::= { nplus1StandardPMCurrEntry 11 } nplus1StandardPMCurrLastDayPSAD OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the last Day PSAD value. " ::= { nplus1StandardPMCurrEntry 12 } nplus1StandardPMCurrLastDayFSRD OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the last Day FSRD value. " ::= { nplus1StandardPMCurrEntry 13 } nplus1StandardPMIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF Nplus1StandardPMIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the standard PM interval. " ::= { gnLinkGroups 9 } nplus1StandardPMIntervalEntry OBJECT-TYPE SYNTAX Nplus1StandardPMIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the standard PM interval. " INDEX { nplus1StandardPMIntervalCarrierId, nplus1StandardPMIntervalIdx} ::= { nplus1StandardPMIntervalTable 1 } Nplus1StandardPMIntervalEntry ::= SEQUENCE { nplus1StandardPMIntervalCarrierId INTEGER (1..15), nplus1StandardPMIntervalIdx INTEGER (1..96), nplus1StandardPMIntervalIDF INTEGER, nplus1StandardPMIntervalGroupNum INTEGER (-1..4), nplus1StandardPMIntervalPSAC Gauge, nplus1StandardPMIntervalFSRC Gauge, nplus1StandardPMIntervalPSAD Gauge, nplus1StandardPMIntervalFSRD Gauge } nplus1StandardPMIntervalCarrierId OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the carrier id. " ::= { nplus1StandardPMIntervalEntry 1 } nplus1StandardPMIntervalIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the index. " ::= { nplus1StandardPMIntervalEntry 2 } nplus1StandardPMIntervalIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This value is an invalid data flag. " ::= { nplus1StandardPMIntervalEntry 3 } nplus1StandardPMIntervalGroupNum OBJECT-TYPE SYNTAX INTEGER (-1..4) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the group's number. " ::= { nplus1StandardPMIntervalEntry 4 } nplus1StandardPMIntervalPSAC OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the PSAC value. " ::= { nplus1StandardPMIntervalEntry 5 } nplus1StandardPMIntervalFSRC OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the FSRC value. " ::= { nplus1StandardPMIntervalEntry 6 } nplus1StandardPMIntervalPSAD OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the PSAD value. " ::= { nplus1StandardPMIntervalEntry 7 } nplus1StandardPMIntervalFSRD OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the FSRD value. " ::= { nplus1StandardPMIntervalEntry 8 } nplus1StandardPMDayTable OBJECT-TYPE SYNTAX SEQUENCE OF Nplus1StandardPMDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table indicates the standard PM day table. " ::= { gnLinkGroups 10 } nplus1StandardPMDayEntry OBJECT-TYPE SYNTAX Nplus1StandardPMDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing the standard PM day table. " INDEX { nplus1StandardPMDayCarrierId, nplus1StandardPMDayIdx} ::= { nplus1StandardPMDayTable 1 } Nplus1StandardPMDayEntry ::= SEQUENCE { nplus1StandardPMDayCarrierId INTEGER (1..15), nplus1StandardPMDayIdx INTEGER (1..30), nplus1StandardPMDayIDF INTEGER, nplus1StandardPMDayGroupNum INTEGER (-1..4), nplus1StandardPMDayPSAC Gauge, nplus1StandardPMDayFSRC Gauge, nplus1StandardPMDayPSAD Gauge, nplus1StandardPMDayFSRD Gauge } nplus1StandardPMDayCarrierId OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the carrier id. " ::= { nplus1StandardPMDayEntry 1 } nplus1StandardPMDayIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the index. " ::= { nplus1StandardPMDayEntry 2 } nplus1StandardPMDayIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This value is an invalid data flag. " ::= { nplus1StandardPMDayEntry 3 } nplus1StandardPMDayGroupNum OBJECT-TYPE SYNTAX INTEGER (-1..4) ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the group's number. " ::= { nplus1StandardPMDayEntry 4 } nplus1StandardPMDayPSAC OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the PSAC value. " ::= { nplus1StandardPMDayEntry 5 } nplus1StandardPMDayFSRC OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the FSRC value. " ::= { nplus1StandardPMDayEntry 6 } nplus1StandardPMDayPSAD OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the PSAD value. " ::= { nplus1StandardPMDayEntry 7 } nplus1StandardPMDayFSRD OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the FSRD value. " ::= { nplus1StandardPMDayEntry 8 } -- ///// Protect end //////////// gnSSM OBJECT IDENTIFIER ::= { gnUnits 4 } gnSSMCfg OBJECT IDENTIFIER ::= { gnSSM 1 } gnSSMCfgSSMMode OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } ACCESS read-write STATUS mandatory DESCRIPTION " " DEFVAL { disabled } ::= { gnSSMCfg 1 } gnSSMCfgPrimaryClockSource OBJECT-TYPE SYNTAX INTEGER { internalClock(2), external2MB(3), radioClock(4), fiberClock(5), external2MHz(6), external1AndHalfMB(7), tributaryClock1(8), tributaryClock2(9), tributaryClock3(10), tributaryClock4(11), tributaryClock5(12), tributaryClock6(13), tributaryClock7(14), tributaryClock8(15), tributaryClock9(16), tributaryClock10(17), tributaryClock11(18), tributaryClock12(19), tributaryClock13(20), tributaryClock14(21), tributaryClock15(22), tributaryClock16(23), tribSTM1(24) } ACCESS read-write STATUS mandatory DESCRIPTION "The primary clock source, configurable for ACCESS radios only." DEFVAL { internalClock } ::= { gnSSMCfg 2 } gnSSMCfgPrimaryClockQuality OBJECT-TYPE SYNTAX INTEGER (1..6) ACCESS read-write STATUS mandatory DESCRIPTION " This parameter indicates the primary clock quality. Possible values for SDH: PRC(1), SSUT(2), SSUL(3), SEC(4), STU(5). Possible values for Sonet: PRS(1), STU(2), ST2(3), ST3(4), SMC(5), ST4(6). " ::= { gnSSMCfg 3 } gnSSMCfgSecondaryClockSource OBJECT-TYPE SYNTAX INTEGER { internalClock(2), external2MB(3), radioClock(4), fiberClock(5), external2MHz(6), external1AndHalfMB(7), tributaryClock1(8), tributaryClock2(9), tributaryClock3(10), tributaryClock4(11), tributaryClock5(12), tributaryClock6(13), tributaryClock7(14), tributaryClock8(15), tributaryClock9(16), tributaryClock10(17), tributaryClock11(18), tributaryClock12(19), tributaryClock13(20), tributaryClock14(21), tributaryClock15(22), tributaryClock16(23), tribSTM1(24) } ACCESS read-write STATUS mandatory DESCRIPTION "The secondary clock source, configurable for ACCESS radios only." DEFVAL { internalClock } ::= { gnSSMCfg 4 } gnSSMCfgSecondaryClockQuality OBJECT-TYPE SYNTAX INTEGER (1..6) ACCESS read-write STATUS mandatory DESCRIPTION " This parameter indicates the secondary clock quality. Possible values for SDH: PRC(1), SSUT(2), SSUL(3), SEC(4), STU(5). Possible values for Sonet: PRS(1), STU(2), ST2(3), ST3(4), SMC(5), ST4(6). " ::= { gnSSMCfg 5 } gnSSMCfgClockUserCommand OBJECT-TYPE SYNTAX INTEGER { noAction(2), switchToPrimaryClock(3), switchToSecondaryClock(4), switchToInternalClock(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The clock user command. Switch is possible only when the SSM mode is disable." DEFVAL { noAction } ::= { gnSSMCfg 6 } gnSSMCfgClockOutputMute OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates if clock output will be in mute state. (Mute on -> don't transmit) " DEFVAL { 2 } ::= { gnSSMCfg 7 } gnSSMStat OBJECT IDENTIFIER ::= { gnSSM 2 } gnSSMStatStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION " Alarm status of SSM. Bit 1 is MSB, bit=1 when alarm active. bit 1 = Unlock bit 2 = Out Of Range bit 3 = Primary Clock Source Failure bit 4 = Secondary Clock Source Failure " ::= { gnSSMStat 1 } gnSSMStatCurrentClock OBJECT-TYPE SYNTAX INTEGER { primary(2), secondary(3), internal(4), holdOver(5) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnSSMStat 2 } gnSSMStatCurrentClockQuality OBJECT-TYPE SYNTAX INTEGER (1..7) ACCESS read-only STATUS mandatory DESCRIPTION " This parameter indicates the current clock quality. SDH values: PRC(1), SSUT(2), SSUL(3), SEC(4), STU(5), DNU(6). Sonet values: PRS(1), STU(2), ST2(3), ST3(4), SMC(5), ST4(6), DUS(7)." ::= { gnSSMStat 3 } gnSSMStatClockUnitType OBJECT-TYPE SYNTAX INTEGER { noClockUnit(2), smc(3), sec(4), st3(5), st3e(6) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { gnSSMStat 4 } gnSSMStatHoldoverPeriod OBJECT-TYPE SYNTAX INTEGER (0..2880) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter indicates the minutes time period in holdover state. " DEFVAL { 0 } ::= { gnSSMStat 5 } gnAccess OBJECT IDENTIFIER ::= { ceragon 4 } gnAccessCfg OBJECT IDENTIFIER ::= { gnAccess 1 } gnAccessCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnAccessCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration and status of the access ports." ::= { gnAccessCfg 1 } gnAccessCfgEntry OBJECT-TYPE SYNTAX GnAccessCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry for the table containing an interface index for every interface which type is DS3 (30, according to RFC1573)." INDEX { ifIndex } ::= { gnAccessCfgTable 1 } GnAccessCfgEntry ::= SEQUENCE { gnAccessCfgLongCableOption INTEGER, gnAccessCfgLoopbackOption INTEGER, gnAccessCfgRunPrbs INTEGER, gnAccessCfgEXCThresh INTEGER, gnAccessCfgSDThresh INTEGER, gnAccessCfgTest INTEGER, gnAccessCfgLineCoding INTEGER } gnAccessCfgLongCableOption OBJECT-TYPE SYNTAX INTEGER { ds3ShortCable(2), ds3LongCable(3), t1From0to133ft(4), t1From133to266ft(5), t1From266to399ft(6), t1From399to533ft(7), t1From533to655ft(8), anyLength(9), t1FA640From0to110ft(10), t1FA640From110to220ft(11), t1FA640From220to330ft(12), t1FA640From330to440ft(13), t1FA640From440to550ft(14) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter defines the line build-out option. Possible values: For DS3: ds3ShortCable, ds3LongCable. For T1: t1From0to133ft..t1From533to655ft. For E1/E3: anyLength. For T1 in 640 systems: t1FA640From0to110ft..t1FA640From440to550ft." DEFVAL { t1From0to133ft } ::= { gnAccessCfgEntry 1 } gnAccessCfgLoopbackOption OBJECT-TYPE SYNTAX INTEGER { noloopback(2), interfaceInterLoop(3), interfaceExterLoop(4) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter enable the user to launch a loopback." ::= { gnAccessCfgEntry 2 } gnAccessCfgRunPrbs OBJECT-TYPE SYNTAX INTEGER { noOperation(2), lineOnRadioOnRcvLine(3), lineOnRadioOnRcvRadio(4), lineOnRadioOffRcvLine(5), lineOnRadioOffRcvRadio(6), lineOffRadioOnRcvLine(7), lineOffRadioOnRcvRadio(8), lineOffRadioOffRcvLine(9), lineOffRadioOffRcvRadio(10), lineOnRadioOnRcvOff(11), lineOffRadioOnRcvOff(12), lineOnRadioOffRcvOff(13) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter enables launching a PRBS test." ::= { gnAccessCfgEntry 3 } gnAccessCfgEXCThresh OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4) } ACCESS read-write STATUS mandatory DESCRIPTION " If the bit error rate is higher than this threshold an EXC alarm would be generated. EXC is for excessive." DEFVAL { tenExpMinus3} ::= { gnAccessCfgEntry 4 } gnAccessCfgSDThresh OBJECT-TYPE SYNTAX INTEGER { tenExpMinus6(3), tenExpMinus7(4), tenExpMinus8(5), tenExpMinus9(6) } ACCESS read-write STATUS mandatory DESCRIPTION " If the bit error rate is higher than this threshold a SD alarm would be generated. SD is for Signal Degrade." DEFVAL { tenExpMinus6} ::= { gnAccessCfgEntry 5 } gnAccessCfgTest OBJECT-TYPE SYNTAX INTEGER { noAction(2), sendAIS(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter controls the action to send AIS or not." ::= { gnAccessCfgEntry 6 } gnAccessCfgLineCoding OBJECT-TYPE SYNTAX INTEGER { ami(2), b8zs(3), hdb3(4), b3zs(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The line coding possible values: For T1: B7ZS(ami), B8ZS. For E1 & E3: HDB3. For DS3: B3ZS" ::= { gnAccessCfgEntry 7 } --------------- gnAccessStat OBJECT IDENTIFIER ::= { gnAccess 2 } gnAccessStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnAccessStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the status of the access ports." ::= { gnAccessStat 1 } gnAccessStatEntry OBJECT-TYPE SYNTAX GnAccessStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry for the table containing an interface index for every interface which type is DS3 (30, according to RFC1573)." INDEX { ifIndex } ::= { gnAccessStatTable 1 } GnAccessStatEntry ::= SEQUENCE { gnAccessStatInterfaceBer INTEGER, gnAccessStatStatus OCTET STRING, gnAccessStatPrbsBer INTEGER, gnAccessStatValidIntervals INTEGER } gnAccessStatInterfaceBer OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13) } ACCESS read-only STATUS mandatory DESCRIPTION " Current Bit Error Rate. " ::= { gnAccessStatEntry 1 } gnAccessStatStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION " Alarm status of an ACCESS radio. Bit 1 is MSB, bit=1 when alarm active. bit 2 = LOS bit 6 = AIS bit 9 = SD bit 10 = EXC bit 11 = Unexpected signal -- when disabled, will rise if detect data. bit 14 = Out Of Lock " ::= { gnAccessStatEntry 2 } gnAccessStatPrbsBer OBJECT-TYPE SYNTAX INTEGER { tenExpMinus3(2), tenExpMinus4(3), tenExpMinus5(4), tenExpMinus6(5), tenExpMinus7(6), tenExpMinus8(7), tenExpMinus9(8), tenExpMinus10(9), tenExpMinus11(10), tenExpMinus12(11), tenExpMinus13(12), tenExpMinus14(13) } ACCESS read-only STATUS mandatory DESCRIPTION "Current PRBS Errors of the operation set in the mib variable gnAccessCfgRunPrbs, use this variable to clear the error counter." ::= { gnAccessStatEntry 3 } gnAccessStatValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous valid intervals for which valid data has been stored for the specific interface." ::= { gnAccessStatEntry 4 } ---- gnFastEthernetCfg OBJECT IDENTIFIER ::= { gnAccess 3 } gnFastEthernetCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnFastEthernetCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the Fast Ethernet ports." ::= { gnFastEthernetCfg 1 } gnFastEthernetCfgEntry OBJECT-TYPE SYNTAX GnFastEthernetCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Fast Ethernet configuration table." INDEX { ifIndex } ::= { gnFastEthernetCfgTable 1 } GnFastEthernetCfgEntry ::= SEQUENCE { gnFastEthernetCfgAutoNegotiation INTEGER, gnFastEthernetCfgForceSpeed INTEGER, gnFastEthernetCfgDynamicBand INTEGER, gnFastEthernetCfgGigabitEthernet INTEGER, gnFastEthernetCfgDuplexMode INTEGER, gnFastEthernetCfgQueuingScheme INTEGER } gnFastEthernetCfgAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter defines if auto negotiations protocol is active." ::= { gnFastEthernetCfgEntry 1 } gnFastEthernetCfgForceSpeed OBJECT-TYPE SYNTAX INTEGER { tenBased(2), hundredBased(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter force speed when auto negotiation is off." ::= { gnFastEthernetCfgEntry 2 } gnFastEthernetCfgDynamicBand OBJECT-TYPE SYNTAX INTEGER { notActive(2), dynamic(3), leftPreferred(4), vlanPriority(5), ipPriority(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Dynamic bandwidth allocation: dynamic means that the two Fast Ethernet ports have the same priority. LeftPreferred indicates that left Fast Ethernet card priority is higher." ::= { gnFastEthernetCfgEntry 3 } gnFastEthernetCfgGigabitEthernet OBJECT-TYPE SYNTAX INTEGER { disable(2), enable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Gigabit Ethernet option. This parameter will be changed after reset. " ::= { gnFastEthernetCfgEntry 4 } gnFastEthernetCfgDuplexMode OBJECT-TYPE SYNTAX INTEGER { halfDuplex(2), fullDuplex(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter force duplex mode when auto negotiation is off." ::= { gnFastEthernetCfgEntry 5 } gnFastEthernetCfgQueuingScheme OBJECT-TYPE SYNTAX INTEGER { fixedPriority(2), weightedFair(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the Queuing algorithm." ::= { gnFastEthernetCfgEntry 6 } ---- gnFastEthernetStat OBJECT IDENTIFIER ::= { gnAccess 4 } gnFastEthernetStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnFastEthernetStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Fast Ethernet status table." ::= { gnFastEthernetStat 1 } gnFastEthernetStatEntry OBJECT-TYPE SYNTAX GnFastEthernetStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Fast Ethernet status table." INDEX { ifIndex } ::= { gnFastEthernetStatTable 1 } GnFastEthernetStatEntry ::= SEQUENCE { gnFastEthernetStatStatus OCTET STRING } gnFastEthernetStatStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION " Alarm status of an FE radio. Bit 1 is MSB, bit=1 when alarm active. bit 2 = Loss of Carrier" ::= { gnFastEthernetStatEntry 1 } ---- -- Statistics(PM) For PDH (NB DS3). All PDH tables are included for future -- development and are not currently implemented. gnPdhMon OBJECT IDENTIFIER ::= { gnAccess 5 } gnPdhMonCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF GnPdhMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters for the PDH table. " ::= { gnPdhMon 1 } gnPdhMonCurrEntry OBJECT-TYPE SYNTAX GnPdhMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the PDH Counters Table. This table contains an interface index for every interface which type is DS3(30, according to RFC1573)." INDEX { ifIndex } ::= { gnPdhMonCurrTable 1 } GnPdhMonCurrEntry ::= SEQUENCE { gnPdhMonCurrES Gauge, gnPdhMonCurrSES Gauge, gnPdhMonCurrBBE Gauge, gnPdhMonCurrUAS Gauge, gnPdhMonCurrCV Gauge, gnPdhMonCurrLastDayES Gauge, gnPdhMonCurrLastDaySES Gauge, gnPdhMonCurrLastDayBBE Gauge, gnPdhMonCurrLastDayUAS Gauge, gnPdhMonCurrLastDayCV Gauge, gnPdhMonCurrLastDayIDF INTEGER } gnPdhMonCurrES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current number of errored seconds starting from the present 15 minute period. ." ::= { gnPdhMonCurrEntry 1} gnPdhMonCurrSES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current number of severely errored seconds, starting from the present 15 minute period." ::= { gnPdhMonCurrEntry 2} gnPdhMonCurrBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 15 minutes period." ::= { gnPdhMonCurrEntry 3} gnPdhMonCurrUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 15 minutes period." ::= { gnPdhMonCurrEntry 4} gnPdhMonCurrCV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of CV starting from the present 15 minutes period." ::= { gnPdhMonCurrEntry 5} gnPdhMonCurrLastDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Errored Seconds starting from the present 24 hours period." ::= { gnPdhMonCurrEntry 6 } gnPdhMonCurrLastDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Severely Errored Seconds starting from the present 24 hours period." ::= { gnPdhMonCurrEntry 7 } gnPdhMonCurrLastDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Background Block Errors starting from the present 24 hours period." ::= { gnPdhMonCurrEntry 8 } gnPdhMonCurrLastDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current number of Unavailable Seconds starting from the present 24 hours period." ::= { gnPdhMonCurrEntry 9 } gnPdhMonCurrLastDayCV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The current number of CV, starting from the present 24-hour period." ::= { gnPdhMonCurrEntry 10} gnPdhMonCurrLastDayIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnPdhMonCurrEntry 11 } gnPdhMonIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF GnPdhMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the PDH per interval." ::= { gnPdhMon 2 } gnPdhMonIntervalEntry OBJECT-TYPE SYNTAX GnPdhMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the PDH Counters Table. This table contains an interface index for every interface which type is DS3(30, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96." INDEX { ifIndex, gnPdhMonIntervalIdx} ::= { gnPdhMonIntervalTable 1 } GnPdhMonIntervalEntry ::= SEQUENCE { gnPdhMonIntervalIdx INTEGER, gnPdhMonIntervalES Gauge, gnPdhMonIntervalSES Gauge, gnPdhMonIntervalBBE Gauge, gnPdhMonIntervalUAS Gauge, gnPdhMonIntervalCV Gauge, gnPdhMonIntervalIDF INTEGER } gnPdhMonIntervalIdx OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96." ::= { gnPdhMonIntervalEntry 1 } gnPdhMonIntervalES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of errored seconds per interval." ::= { gnPdhMonIntervalEntry 2} gnPdhMonIntervalSES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of severely errored seconds per interval." ::= { gnPdhMonIntervalEntry 3} gnPdhMonIntervalBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval." ::= { gnPdhMonIntervalEntry 4} gnPdhMonIntervalUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval." ::= { gnPdhMonIntervalEntry 5} gnPdhMonIntervalCV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of CV per interval." ::= { gnPdhMonIntervalEntry 6} gnPdhMonIntervalIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnPdhMonIntervalEntry 7 } gnPdhMonDayTable OBJECT-TYPE SYNTAX SEQUENCE OF GnPdhMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the counters of the PDH per 24 hours interval." ::= { gnPdhMon 3 } gnPdhMonDayEntry OBJECT-TYPE SYNTAX GnPdhMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the PDH Counters Table. This table contains an interface index for every interface which type is DS3(30, according to RFC1573). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30." INDEX { ifIndex, gnPdhMonDayIdx} ::= { gnPdhMonDayTable 1 } GnPdhMonDayEntry ::= SEQUENCE { gnPdhMonDayIdx INTEGER, gnPdhMonDayES Gauge, gnPdhMonDaySES Gauge, gnPdhMonDayBBE Gauge, gnPdhMonDayUAS Gauge, gnPdhMonDayCV Gauge, gnPdhMonDayIDF INTEGER } gnPdhMonDayIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30." ::= { gnPdhMonDayEntry 1 } gnPdhMonDayES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Errored Seconds per interval of 24 hours." ::= { gnPdhMonDayEntry 2} gnPdhMonDaySES OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Severely Errored Seconds per interval of 24 hours." ::= { gnPdhMonDayEntry 3} gnPdhMonDayBBE OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Background Block Errors per interval of 24 hours." ::= { gnPdhMonDayEntry 4 } gnPdhMonDayUAS OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Unavailable Seconds per interval of 24 hours." ::= { gnPdhMonDayEntry 5 } gnPdhMonDayCV OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of Code Violation Seconds per interval of 24 hours." ::= { gnPdhMonDayEntry 6} gnPdhMonDayIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnPdhMonDayEntry 7 } ---- -- ADI: FE Statistics gnFastEthernetMon OBJECT IDENTIFIER ::= { gnAccess 6 } gnFastEthernetMonPrivateTable OBJECT-TYPE SYNTAX SEQUENCE OF GnFastEthernetMonPrivateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Fast Ethernet Private Statistics Table." ::= { gnFastEthernetMon 1 } gnFastEthernetMonPrivateEntry OBJECT-TYPE SYNTAX GnFastEthernetMonPrivateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Fast Ethernet private statistics table." INDEX { ifIndex } ::= { gnFastEthernetMonPrivateTable 1 } GnFastEthernetMonPrivateEntry ::= SEQUENCE { gnFastEthernetMonPrivateAlignmentErrors Counter, gnFastEthernetMonPrivateFcsErrors Counter, gnFastEthernetMonPrivateFrameTooLongs Counter } gnFastEthernetMonPrivateAlignmentErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of received packets with an alignment error (Received frame length is not a multiple of 8 bits, and an FCS error had occurred). " ::= { gnFastEthernetMonPrivateEntry 1 } gnFastEthernetMonPrivateFcsErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of received packets with a frame check sequence (FCS) or Cycle Redundancy Check (CRC) error. " ::= { gnFastEthernetMonPrivateEntry 2 } gnFastEthernetMonPrivateFrameTooLongs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of received frames with an illegal packet length (>1518 bytes). " ::= { gnFastEthernetMonPrivateEntry 3 } --------------- gnFastEthernetMonStdHiTable OBJECT-TYPE SYNTAX SEQUENCE OF GnFastEthernetMonStdHiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the 32 high bits (MSB) of RFC1213 statistics for Fast Ethernet." ::= { gnFastEthernetMon 2 } gnFastEthernetMonStdHiEntry OBJECT-TYPE SYNTAX GnFastEthernetMonStdHiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Fast Ethernet Standard Statistics Table." INDEX { ifIndex } ::= { gnFastEthernetMonStdHiTable 1 } GnFastEthernetMonStdHiEntry ::= SEQUENCE { gnFastEthernetMonStdHiInOctetsHC Counter, gnFastEthernetMonStdHiInUcastPktsHC Counter, gnFastEthernetMonStdHiInNUcastPktsHC Counter, gnFastEthernetMonStdHiOutOctetsHC Counter, gnFastEthernetMonStdHiOutUcastPktsHC Counter, gnFastEthernetMonStdHiOutNUcastPktsHC Counter } gnFastEthernetMonStdHiInOctetsHC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 32 MSB of The total number of octets received on the interface, including framing characters." ::= { gnFastEthernetMonStdHiEntry 1 } gnFastEthernetMonStdHiInUcastPktsHC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 32 MSB of The number of subnetwork-unicast packets delivered to a higher-layer protocol." ::= { gnFastEthernetMonStdHiEntry 2 } gnFastEthernetMonStdHiInNUcastPktsHC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 32 MSB of The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol." ::= { gnFastEthernetMonStdHiEntry 3 } gnFastEthernetMonStdHiOutOctetsHC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 32 MSB of The total number of octets transmitted out of the interface, including framing characters." ::= { gnFastEthernetMonStdHiEntry 4 } gnFastEthernetMonStdHiOutUcastPktsHC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 32 MSB of The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent." ::= { gnFastEthernetMonStdHiEntry 5 } gnFastEthernetMonStdHiOutNUcastPktsHC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 32 MSB of The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent." ::= { gnFastEthernetMonStdHiEntry 6 } gnTrailCfg OBJECT IDENTIFIER ::= { gnAccess 7 } gnTrailCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnTrailCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the trail ports." ::= { gnTrailCfg 1 } gnTrailCfgEntry OBJECT-TYPE SYNTAX GnTrailCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { ifIndex } ::= { gnTrailCfgTable 1 } GnTrailCfgEntry ::= SEQUENCE { gnTrailCfgTrailName DisplayString, gnTrailCfgProtection INTEGER, gnTrailCfgLowPathIndex INTEGER, gnTrailCfgLowPathSide INTEGER, gnTrailCfgProtectionOptions INTEGER, gnTrailCfgMismatchJ2 INTEGER, gnTrailCfgTransmittedJ2 DisplayString, gnTrailCfgExpectedJ2 DisplayString, gnTrailCfgReversionMode INTEGER, gnTrailCfgProtectionUserCommand INTEGER, gnTrailCfgHoldOffTime INTEGER, gnTrailCfgOscillationGuardTime INTEGER, gnTrailCfgWaitToRestoreTime INTEGER, gnTrailCfgSignalLabelMismatch INTEGER, gnTrailCfgBERConsAction INTEGER } gnTrailCfgTrailName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { gnTrailCfgEntry 1 } gnTrailCfgProtection OBJECT-TYPE SYNTAX INTEGER { protected(2), unprotected(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { protected} ::= { gnTrailCfgEntry 2 } gnTrailCfgLowPathIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the K.L.M index. It includes 3 digits: K - most significant digit, L - next digit, M - last significant digit. For E1 ports (SDH): K=1..3 ; L=1..7 ; M=1..3. For T1 ports (Sonet): K=1..3 ; L=1..7 ; M=1..4. For DS3/E3: K=1..3 ; L=M=0. If there is no K.L.M index: K=L=M=0. Example: for mapping an E1 port to K.L.M = 2.5.3, write 253." ::= { gnTrailCfgEntry 3 } gnTrailCfgLowPathSide OBJECT-TYPE SYNTAX INTEGER { east(2), west(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL {east} ::= { gnTrailCfgEntry 4 } gnTrailCfgProtectionOptions OBJECT-TYPE SYNTAX INTEGER { inhibit(2), auto(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL {auto} ::= { gnTrailCfgEntry 5 } gnTrailCfgMismatchJ2 OBJECT-TYPE SYNTAX INTEGER{ sendAlarm(2), sendAIS(3), ignoreAlarm(4) } ACCESS read-write STATUS mandatory DESCRIPTION "In case of J2 mismatch error, send alarm or send AIS." DEFVAL { sendAlarm } ::= { gnTrailCfgEntry 6 } gnTrailCfgTransmittedJ2 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the J2 string that would be sent." DEFVAL { "J2 J2 J2 J2 J2 " } ::= { gnTrailCfgEntry 7 } gnTrailCfgExpectedJ2 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the J2 string that is expected to be received." DEFVAL { "J2 J2 J2 J2 J2 " } ::= { gnTrailCfgEntry 8 } gnTrailCfgReversionMode OBJECT-TYPE SYNTAX INTEGER { revertive(2), nonRevertive(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL {nonRevertive} ::= { gnTrailCfgEntry 9 } gnTrailCfgProtectionUserCommand OBJECT-TYPE SYNTAX INTEGER { noAction(2), switchToProtection(3), switchToWorking(4) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL {noAction} ::= { gnTrailCfgEntry 10 } gnTrailCfgHoldOffTime OBJECT-TYPE SYNTAX INTEGER (0..20000) ACCESS read-write STATUS mandatory DESCRIPTION "This is the hold-off time in milliseconds. Possible values: 0..20000, 100 mSec steps. " DEFVAL {0} ::= { gnTrailCfgEntry 11 } gnTrailCfgOscillationGuardTime OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "This is the oscillation guard time in seconds. Possible values: 0..60. " DEFVAL {0} ::= { gnTrailCfgEntry 12 } gnTrailCfgWaitToRestoreTime OBJECT-TYPE SYNTAX INTEGER (5..12) ACCESS read-write STATUS mandatory DESCRIPTION "This is the wait-to-restore time in minutes. Possible values: 5..12. " DEFVAL {5} ::= { gnTrailCfgEntry 13 } gnTrailCfgSignalLabelMismatch OBJECT-TYPE SYNTAX INTEGER{ sendAlarm(2), sendAIS(3) } ACCESS read-write STATUS mandatory DESCRIPTION " In case of a V5 mismatch error, send or don't send AIS." DEFVAL { sendAlarm } ::= { gnTrailCfgEntry 14 } gnTrailCfgBERConsAction OBJECT-TYPE SYNTAX INTEGER{ sendAlarm(2), sendAISDoPathProtection(3), doPathProtection(4) } ACCESS read-write STATUS mandatory DESCRIPTION " " DEFVAL { doPathProtection } ::= { gnTrailCfgEntry 15 } gnTribCfg OBJECT IDENTIFIER ::= { gnAccess 8 } gnTribCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnTribCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the virtual trails in the Trib STM-1." ::= { gnTribCfg 1 } gnTribCfgEntry OBJECT-TYPE SYNTAX GnTribCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { ifIndex } ::= { gnTribCfgTable 1 } GnTribCfgEntry ::= SEQUENCE { gnTribCfgLowPathIndex INTEGER, gnTribCfgLowPathSide INTEGER, gnTribCfgProtection INTEGER, gnTribCfgProtectionOptions INTEGER, gnTribCfgReversionMode INTEGER, gnTribCfgProtectionUserCommand INTEGER, gnTribCfgHoldOffTime INTEGER, gnTribCfgOscillationGuardTime INTEGER, gnTribCfgWaitToRestoreTime INTEGER, gnTribCfgKLM INTEGER -- gnTribCfgBERConsAction ask Shuki if we need this -- INTEGER } gnTribCfgLowPathIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the K.L.M index. It includes 3 digits: K - most significant digit, L - next digit, M - last significant digit. For E1 ports (SDH): K=1..3 ; L=1..7 ; M=1..3. For T1 ports (Sonet): K=1..3 ; L=1..7 ; M=1..4. For DS3/E3: K=1..3 ; L=M=0. If there is no K.L.M index: K=L=M=0. Example: for mapping an E1 port to K.L.M = 2.5.3, write 253." ::= { gnTribCfgEntry 1 } gnTribCfgLowPathSide OBJECT-TYPE SYNTAX INTEGER { east(2), west(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL {east} ::= { gnTribCfgEntry 2 } gnTribCfgProtection OBJECT-TYPE SYNTAX INTEGER { protected(2), unprotected(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { protected} ::= { gnTribCfgEntry 3 } gnTribCfgProtectionOptions OBJECT-TYPE SYNTAX INTEGER { inhibit(2), auto(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL {auto} ::= { gnTribCfgEntry 4 } gnTribCfgReversionMode OBJECT-TYPE SYNTAX INTEGER { revertive(2), nonRevertive(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL {nonRevertive} ::= { gnTribCfgEntry 5 } gnTribCfgProtectionUserCommand OBJECT-TYPE SYNTAX INTEGER { noAction(2), switchToProtection(3), switchToWorking(4) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL {noAction} ::= { gnTribCfgEntry 6 } gnTribCfgHoldOffTime OBJECT-TYPE SYNTAX INTEGER (0..20000) ACCESS read-write STATUS mandatory DESCRIPTION "This is the hold-off time in milliseconds. Possible values: 0..20000, 100 mSec steps. " DEFVAL {0} ::= { gnTribCfgEntry 7 } gnTribCfgOscillationGuardTime OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "This is the oscillation guard time in seconds. Possible values: 0..60. " DEFVAL {0} ::= { gnTribCfgEntry 8 } gnTribCfgWaitToRestoreTime OBJECT-TYPE SYNTAX INTEGER (5..12) ACCESS read-write STATUS mandatory DESCRIPTION "This is the wait-to-restore time in minutes. Possible values: 5..12. " DEFVAL {5} ::= { gnTribCfgEntry 9 } gnTribCfgKLM OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { gnTribCfgEntry 10 } -- gnTribCfgBERConsAction OBJECT-TYPE -- SYNTAX INTEGER{ -- sendAlarm(2), -- sendAISDoPathProtection(3), -- doPathProtection(4) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " " -- DEFVAL { doPathProtection } -- ::= { gnTribCfgEntry 15 } ------ gnTrailPassThrough OBJECT IDENTIFIER ::= { gnAccess 9 } gnTrailPassThroughTable OBJECT-TYPE SYNTAX SEQUENCE OF GnTrailPassThroughEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the virtual trails in the Trib STM-1. It is applicable for ADM" ::= { gnTrailPassThrough 1 } gnTrailPassThroughEntry OBJECT-TYPE SYNTAX GnTrailPassThroughEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { gnTrailPassThroughIndex } ::= { gnTrailPassThroughTable 1 } GnTrailPassThroughEntry ::= SEQUENCE { gnTrailPassThroughIndex INTEGER, gnTrailPassThroughName DisplayString } gnTrailPassThroughIndex OBJECT-TYPE SYNTAX INTEGER (1..84) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index of Trail Pass-Through Table. SDH(1-63), Sonet (1-84)." ::= { gnTrailPassThroughEntry 1 } gnTrailPassThroughName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "for NMS use" ::= { gnTrailPassThroughEntry 2 } gnGigabitEthernetCfg OBJECT IDENTIFIER ::= { gnAccess 10 } gnGigabitEthernetCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGigabitEthernetCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the configuration of the Gigabit Ethernet port." ::= { gnGigabitEthernetCfg 1 } gnGigabitEthernetCfgEntry OBJECT-TYPE SYNTAX GnGigabitEthernetCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Gigabit Ethernet configuration table." INDEX { ifIndex } ::= { gnGigabitEthernetCfgTable 1 } GnGigabitEthernetCfgEntry ::= SEQUENCE { gnGigabitEthernetCfgPauseFrameGenerating INTEGER, gnGigabitEthernetCfgMuteOnExcError INTEGER, gnGigabitEthernetCfgMuteOnSd INTEGER, gnGigabitEthernetCfgMuteOnRemoteRadioFault INTEGER, gnGigabitEthernetCfgSpeedAndDuplex INTEGER, gnGigabitEthernetCfgSchedulerPriorityOption INTEGER, gnGigabitEthernetCfgSchedulerQueue1Weight INTEGER, gnGigabitEthernetCfgSchedulerQueue2Weight INTEGER, gnGigabitEthernetCfgSchedulerQueue3Weight INTEGER, gnGigabitEthernetCfgSchedulerQueue4Weight INTEGER, gnGigabitEthernetCfgClassifierFirstPrioUDP INTEGER, gnGigabitEthernetCfgClassifierPrioBitSource INTEGER, gnGigabitEthernetCfgClassifierGroupMinVlanId INTEGER, gnGigabitEthernetCfgClassifierGroupMaxVlanId INTEGER, gnGigabitEthernetCfgClassifierGroupVlanPriority INTEGER, gnGigabitEthernetCfgClassifierGroupVlanSet INTEGER, gnGigabitEthernetCfgAcmMuteOnMinConstellation INTEGER, gnGigabitEthernetCfgEnableAutomaticTxMute INTEGER, gnGigabitEthernetCfgTrafficBISTAdmin INTEGER, gnGigabitEthernetCfgClearStatistics INTEGER, gnGigabitEthernetCfgPauseFrameForwarding INTEGER, gnGigabitEthernetCfgPhyLoopback INTEGER } gnGigabitEthernetCfgPauseFrameGenerating OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter defines the option to generate pause frames when the Tx FIFO reaches his threshold level (enable) or to (when disabled) stop generate pause frame." ::= { gnGigabitEthernetCfgEntry 1 } gnGigabitEthernetCfgMuteOnExcError OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter defines whether to mute GBE Tx on excessive BER." ::= { gnGigabitEthernetCfgEntry 2 } gnGigabitEthernetCfgMuteOnSd OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter defines whether to mute GBE Tx port on signal degrade." ::= { gnGigabitEthernetCfgEntry 3 } gnGigabitEthernetCfgMuteOnRemoteRadioFault OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter defines whether to mute GBE Tx port on exe error." ::= { gnGigabitEthernetCfgEntry 4 } gnGigabitEthernetCfgSpeedAndDuplex OBJECT-TYPE SYNTAX INTEGER { autoNegotiation(2), thousandBasedFullDuplex(3), thousandBasedHalfDuplex(4), hundredBasedFullDuplex(5), hundredBasedHalfDuplex(6), tenBasedFullDuplex(7), tenBasedHalfDuplex(8) } ACCESS read-write STATUS mandatory DESCRIPTION " This parameter defines the speed and duplex of the gigabit port, this parameter is not relevant when using an electric SFP giga line interface." ::= { gnGigabitEthernetCfgEntry 5 } gnGigabitEthernetCfgSchedulerPriorityOption OBJECT-TYPE SYNTAX INTEGER { strict(2), hrr(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter defines the algorithm, which the Ethernet packets are taken from the 4 queues. Strict - The Packets are taken according to strict order (from queue #1 till queue #4). HRR - Hierarchal Round Robin - the Ethernet packets are taken according to the configure weight." ::= { gnGigabitEthernetCfgEntry 6 } gnGigabitEthernetCfgSchedulerQueue1Weight OBJECT-TYPE SYNTAX INTEGER { strict(17) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the weight of the queue." ::= { gnGigabitEthernetCfgEntry 7 } gnGigabitEthernetCfgSchedulerQueue2Weight OBJECT-TYPE SYNTAX INTEGER ( 1..16 ) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the weight of the queue." ::= { gnGigabitEthernetCfgEntry 8 } gnGigabitEthernetCfgSchedulerQueue3Weight OBJECT-TYPE SYNTAX INTEGER ( 1..16 ) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the weight of the queue." ::= { gnGigabitEthernetCfgEntry 9 } gnGigabitEthernetCfgSchedulerQueue4Weight OBJECT-TYPE SYNTAX INTEGER ( 1..16 ) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the weight of the queue." ::= { gnGigabitEthernetCfgEntry 10 } gnGigabitEthernetCfgClassifierFirstPrioUDP OBJECT-TYPE SYNTAX INTEGER { enable(2),disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the administrative status for priority override to UDP packets." ::= { gnGigabitEthernetCfgEntry 11 } gnGigabitEthernetCfgClassifierPrioBitSource OBJECT-TYPE SYNTAX INTEGER { none(2), externalOverhead(3), vlan(4), ip(5), mpls(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the administrative status for priority bits source." ::= { gnGigabitEthernetCfgEntry 12 } gnGigabitEthernetCfgClassifierGroupMinVlanId OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the minimum VLAN Id for the current group." ::= { gnGigabitEthernetCfgEntry 13 } gnGigabitEthernetCfgClassifierGroupMaxVlanId OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the maximum VLAN Id for the current group." ::= { gnGigabitEthernetCfgEntry 14 } gnGigabitEthernetCfgClassifierGroupVlanPriority OBJECT-TYPE SYNTAX INTEGER { clear(0), queue1(1), queue2(2), queue3(3), queue4(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter set the VLAN priority for the current group." ::= { gnGigabitEthernetCfgEntry 15 } gnGigabitEthernetCfgClassifierGroupVlanSet OBJECT-TYPE SYNTAX INTEGER {active(2), notActive(3)} ACCESS read-write STATUS mandatory DESCRIPTION "This parameter release the agent to configure the current group." ::= { gnGigabitEthernetCfgEntry 16 } gnGigabitEthernetCfgAcmMuteOnMinConstellation OBJECT-TYPE SYNTAX INTEGER { acm4QAM(2), acm8QAM(3), acm16QAM(4), acm32QAM(5), acm64QAM(6), acm128QAM(7), acm256QAM(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter defines on which constellation to mute the GBE Tx port." ::= { gnGigabitEthernetCfgEntry 17 } gnGigabitEthernetCfgEnableAutomaticTxMute OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter enable\disable automatic Tx mute by system." ::= { gnGigabitEthernetCfgEntry 18 } gnGigabitEthernetCfgTrafficBISTAdmin OBJECT-TYPE SYNTAX INTEGER {active(2), notActive(3)} ACCESS read-write STATUS mandatory DESCRIPTION "This parameter activate\deactivate GBE traffic test." ::= { gnGigabitEthernetCfgEntry 19 } gnGigabitEthernetCfgClearStatistics OBJECT-TYPE SYNTAX INTEGER { noAction(2), clear(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter clear the gigabit ethernet statistics." ::= { gnGigabitEthernetCfgEntry 20 } gnGigabitEthernetCfgPauseFrameForwarding OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter define if pause frame are forward. if enable pause frame are forward to the user application. if disable pause frame are terminated." ::= { gnGigabitEthernetCfgEntry 21 } gnGigabitEthernetCfgPhyLoopback OBJECT-TYPE SYNTAX INTEGER { noloopback(2), interfaceInterLoop(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter enable disable PHY internal loopback." ::= { gnGigabitEthernetCfgEntry 22 } gnVlanEthernetStat OBJECT IDENTIFIER ::= { gnAccess 11 } gnVlanEthernetStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnVlanEthernetStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table illustrate the VLAN configuration." ::= { gnVlanEthernetStat 1 } gnVlanEthernetStatEntry OBJECT-TYPE SYNTAX GnVlanEthernetStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Vlan configuration status table." INDEX { ifIndex, gnVlanEthernetStatGroupId } ::= { gnVlanEthernetStatTable 1 } GnVlanEthernetStatEntry ::= SEQUENCE { gnVlanEthernetStatGroupId INTEGER, gnVlanEthernetStatMinVlanId INTEGER, gnVlanEthernetStatMaxVlanId INTEGER, gnVlanEthernetStatVlanPriority INTEGER } gnVlanEthernetStatGroupId OBJECT-TYPE SYNTAX INTEGER (1..20) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter illustrate the VLAN group #." ::= { gnVlanEthernetStatEntry 1 } gnVlanEthernetStatMinVlanId OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter illustrate the minimum VLAN id # of a specific group." ::= { gnVlanEthernetStatEntry 2 } gnVlanEthernetStatMaxVlanId OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter illustrate the maximum VLAN id # of a specific group." ::= { gnVlanEthernetStatEntry 3 } gnVlanEthernetStatVlanPriority OBJECT-TYPE SYNTAX INTEGER { queue1(1), queue2(2), queue3(3), queue4(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter illustrate the priority of a specific VLAN group." ::= { gnVlanEthernetStatEntry 4 } gnGigabitEthernetStat OBJECT IDENTIFIER ::= { gnAccess 12 } gnGigabitEthernetStatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGigabitEthernetStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Gigabit Ethernet status table." ::= { gnGigabitEthernetStat 1 } gnGigabitEthernetStatEntry OBJECT-TYPE SYNTAX GnGigabitEthernetStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the Gigabit Ethernet status table." INDEX { ifIndex } ::= { gnGigabitEthernetStatTable 1 } GnGigabitEthernetStatEntry ::= SEQUENCE { gnGigabitEthernetStatBistErrorSeconds INTEGER, gnGigabitEthernetStatSpeedAndDuplexSupport OCTET STRING, gnGigabitEthernetStatValidIntervals INTEGER, gnGigabitEthernetStatSpeedAndDuplexMode INTEGER } gnGigabitEthernetStatBistErrorSeconds OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Traffic BIST results (error seconds)" ::= { gnGigabitEthernetStatEntry 1 } gnGigabitEthernetStatSpeedAndDuplexSupport OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "This field is used only by the element management application. bit #7 - 1 auto negotiation is supported 0 otherwise (MSB). bit #6 - 1 1000 full is supported 0 otherwise. bit #5 - 1 1000 half is supported 0 otherwise. bit #4 - 1 100 full is supported 0 otherwise. bit #3 - 1 100 half is supported 0 otherwise. bit #2 - 1 10 full is supported 0 otherwise. bit #1 - 1 10 half is supported 0 otherwise. bit #0 - not used (LSB)." ::= { gnGigabitEthernetStatEntry 2 } gnGigabitEthernetStatValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous valid intervals for which valid data has been stored for the specific GBE interface." ::= { gnGigabitEthernetStatEntry 3 } gnGigabitEthernetStatSpeedAndDuplexMode OBJECT-TYPE SYNTAX INTEGER { thousandBasedFullDuplex(3), thousandBasedHalfDuplex(4), hundredBasedFullDuplex(5), hundredBasedHalfDuplex(6), tenBasedFullDuplex(7), tenBasedHalfDuplex(8) } ACCESS read-only STATUS mandatory DESCRIPTION "Current speed and duplex mode of the giga port." ::= { gnGigabitEthernetStatEntry 4 } gnGigabitEthernetMon OBJECT IDENTIFIER ::= { gnAccess 13 } gnGigabitEthernetMonCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGigabitEthernetMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the PM for the gigabit ethernet table. " ::= { gnGigabitEthernetMon 1 } gnGigabitEthernetMonCurrEntry OBJECT-TYPE SYNTAX GnGigabitEthernetMonCurrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the PDH Counters Table. This table contains an interface index for every interface which type is GBE(VAL_ifType_ethernetCsmacd-6, according to RFC1573)." INDEX { ifIndex } ::= { gnGigabitEthernetMonCurrTable 1 } GnGigabitEthernetMonCurrEntry ::= SEQUENCE { gnGigabitEthernetMonCurrPacketErrorRate INTEGER, gnGigabitEthernetMonCurrIDF INTEGER, gnGigabitEthernetMonCurrDayPacketErrorRate INTEGER, gnGigabitEthernetMonCurrDayIDF INTEGER } gnGigabitEthernetMonCurrPacketErrorRate OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The packet error rate ( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) ) starting from the present 15 minute period, the calculation is in percent." ::= { gnGigabitEthernetMonCurrEntry 1} gnGigabitEthernetMonCurrIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag in current 15 minutes interval." DEFVAL { off } ::= { gnGigabitEthernetMonCurrEntry 2 } gnGigabitEthernetMonCurrDayPacketErrorRate OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The packet error rate ( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) ) starting from the present 24 hour period, the calculation is in percent." ::= { gnGigabitEthernetMonCurrEntry 3} gnGigabitEthernetMonCurrDayIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag in current 24 hour interval." DEFVAL { off } ::= { gnGigabitEthernetMonCurrEntry 4 } gnGigabitEthernetMonIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGigabitEthernetMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the PM of the GBE per interval." ::= { gnGigabitEthernetMon 2 } gnGigabitEthernetMonIntervalEntry OBJECT-TYPE SYNTAX GnGigabitEthernetMonIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the GBE PM Table. This table contains an interface index for every interface which type is GBE(VAL_ifType_ethernetCsmacd-6, according to RFC1573). This table is indexed by an interval index, between 1 to 96 and representing each one 15 minutes. The oldest is 96." INDEX { ifIndex, gnGigabitEthernetMonIntervalIdx} ::= { gnGigabitEthernetMonIntervalTable 1 } GnGigabitEthernetMonIntervalEntry ::= SEQUENCE { gnGigabitEthernetMonIntervalIdx INTEGER, gnGigabitEthernetMonIntervalPacketErrorRate INTEGER, gnGigabitEthernetMonIntervalIDF INTEGER } gnGigabitEthernetMonIntervalIdx OBJECT-TYPE SYNTAX INTEGER (0..96) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96." ::= { gnGigabitEthernetMonIntervalEntry 1 } gnGigabitEthernetMonIntervalPacketErrorRate OBJECT-TYPE SYNTAX INTEGER(0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The packet error rate per interval( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) ) per 15 minutes interval, the calculation is in percent." ::= { gnGigabitEthernetMonIntervalEntry 2} gnGigabitEthernetMonIntervalIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnGigabitEthernetMonIntervalEntry 3 } gnGigabitEthernetMonDayTable OBJECT-TYPE SYNTAX SEQUENCE OF GnGigabitEthernetMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maintains the PM of the GBE per 24 hours interval." ::= { gnGigabitEthernetMon 3 } gnGigabitEthernetMonDayEntry OBJECT-TYPE SYNTAX GnGigabitEthernetMonDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the GBE PM Table. This table contains an interface index for every interface which type is GBE(VAL_ifType_ethernetCsmacd-6, according to RFC1573). This table is indexed by an interval index, between 1 to 30 and representing each one 24 hours. The oldest is 30." INDEX { ifIndex, gnGigabitEthernetMonDayIdx} ::= { gnGigabitEthernetMonDayTable 1 } GnGigabitEthernetMonDayEntry ::= SEQUENCE { gnGigabitEthernetMonDayIdx INTEGER, gnGigabitEthernetMonDayPacketErrorRate INTEGER, gnGigabitEthernetMonDayIDF INTEGER } gnGigabitEthernetMonDayIdx OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-only STATUS mandatory DESCRIPTION "This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30." ::= { gnGigabitEthernetMonDayEntry 1 } gnGigabitEthernetMonDayPacketErrorRate OBJECT-TYPE SYNTAX INTEGER(0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The packet error rate per interval( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) ) per 24 hour interval, the calculation is in percent." ::= { gnGigabitEthernetMonDayEntry 2} gnGigabitEthernetMonDayIDF OBJECT-TYPE SYNTAX INTEGER { off(2), on(3) } ACCESS read-only STATUS mandatory DESCRIPTION "IDF = Invalid Data Flag." DEFVAL { off } ::= { gnGigabitEthernetMonDayEntry 3 } gnEthStatistic OBJECT IDENTIFIER ::= { gnAccess 14 } gnEthStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF GnEthStatisticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table illustrate the gigabit ethernet statistics." ::= { gnEthStatistic 1 } gnEthStatisticEntry OBJECT-TYPE SYNTAX GnEthStatisticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the gigabit ethernet statistics table. This table illustrate the MSB value of the RMON II statistics." INDEX { ifIndex } ::= { gnEthStatisticTable 1 } GnEthStatisticEntry ::= SEQUENCE { gnEthStatisticIfInOctetsMsb Counter, gnEthStatisticAFrameReceivedOkLsb Counter, gnEthStatisticAFrameReceivedOkMsb Counter, gnEthStatisticCRCAlignErrorsMsb Counter, gnEthStatisticIfInUcastPktsMsb Counter, gnEthStatisticBroadcastPktsMsb Counter, gnEthStatisticMulticastPktsMsb Counter, gnEthStatisticUndersizePktsMsb Counter, gnEthStatisticOversizePktsMsb Counter, gnEthStatisticPkts64OctetMsb Counter, gnEthStatisticPkts65to127OctetMsb Counter, gnEthStatisticPkts128to255OctetMsb Counter, gnEthStatisticPkts256to511OctetMsb Counter, gnEthStatisticPkts512to1023OctetMsb Counter, gnEthStatisticPkts1024to1518OctetMsb Counter, gnEthStatisticRadioTransmitFramesLsb Counter, gnEthStatisticRadioTransmitFramesMsb Counter, gnEthStatisticDroppedPacketsLsb Counter, gnEthStatisticDroppedPacketsMsb Counter, gnEthStatisticRadioReceivedFramesLsb Counter, gnEthStatisticRadioReceivedFramesMsb Counter, gnEthStatisticRadioReceivedCrcFramesLsb Counter, gnEthStatisticRadioReceivedCrcFramesMsb Counter, gnEthStatisticRadioSyncUnlockEventsLsb Counter, gnEthStatisticRadioSyncUnlockEventsMsb Counter, gnEthStatisticAFrameTransmittedOkLsb Counter, gnEthStatisticAFrameTransmittedOkMsb Counter, gnEthStatisticIfOutOctetsMsb Counter, gnEthStatisticEtherStatsPktsMsb Counter, gnEthStatisticEtherStatsOctetsMsb Counter } gnEthStatisticIfInOctetsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received on the interface, including framing characters (MSB)." ::= { gnEthStatisticEntry 1 } gnEthStatisticAFrameReceivedOkLsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sum of frames received without error (LSB)." ::= { gnEthStatisticEntry 2 } gnEthStatisticAFrameReceivedOkMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sum of frames received without error (MSB)." ::= { gnEthStatisticEntry 3 } gnEthStatisticCRCAlignErrorsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error), (MSB)." ::= { gnEthStatisticEntry 4 } gnEthStatisticIfInUcastPktsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of subnetwork-unicast packets delivered to a higher-layer protocol (MSB)." ::= { gnEthStatisticEntry 5 } gnEthStatisticBroadcastPktsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets (MSB)." ::= { gnEthStatisticEntry 6 } gnEthStatisticMulticastPktsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address (MSB)." ::= { gnEthStatisticEntry 7 } gnEthStatisticUndersizePktsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed (MSB)." ::= { gnEthStatisticEntry 8 } gnEthStatisticOversizePktsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received that were longer than 12000 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. (MSB)" ::= { gnEthStatisticEntry 9 } gnEthStatisticPkts64OctetMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets), (MSB)." ::= { gnEthStatisticEntry 10 } gnEthStatisticPkts65to127OctetMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets), (MSB)." ::= { gnEthStatisticEntry 11 } gnEthStatisticPkts128to255OctetMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets), (MSB)." ::= { gnEthStatisticEntry 12 } gnEthStatisticPkts256to511OctetMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets), (MSB)." ::= { gnEthStatisticEntry 13 } gnEthStatisticPkts512to1023OctetMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets), (MSB)." ::= { gnEthStatisticEntry 14 } gnEthStatisticPkts1024to1518OctetMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets), (MSB)." ::= { gnEthStatisticEntry 15 } gnEthStatisticRadioTransmitFramesLsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sum of frame transmitted to radio (LSB)" ::= { gnEthStatisticEntry 16 } gnEthStatisticRadioTransmitFramesMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sum of frame transmitted to radio (MSB)" ::= { gnEthStatisticEntry 17 } gnEthStatisticDroppedPacketsLsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of frames dropped (LSB)" ::= { gnEthStatisticEntry 18 } gnEthStatisticDroppedPacketsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of frames dropped (MSB)" ::= { gnEthStatisticEntry 19 } gnEthStatisticRadioReceivedFramesLsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sum of frames received by radio (LSB)" ::= { gnEthStatisticEntry 20 } gnEthStatisticRadioReceivedFramesMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sum of frames received by radio (MSB)" ::= { gnEthStatisticEntry 21 } gnEthStatisticRadioReceivedCrcFramesLsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "sum of frames received with error (LSB)" ::= { gnEthStatisticEntry 22 } gnEthStatisticRadioReceivedCrcFramesMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "sum of frames received with error (MSB)" ::= { gnEthStatisticEntry 23 } gnEthStatisticRadioSyncUnlockEventsLsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "sum of GFP not locked events (LSB)" ::= { gnEthStatisticEntry 24 } gnEthStatisticRadioSyncUnlockEventsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "sum of GFP not locked events (MSB)" ::= { gnEthStatisticEntry 25 } gnEthStatisticAFrameTransmittedOkLsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sum of valid frames transmitted to line (LSB)." ::= { gnEthStatisticEntry 26 } gnEthStatisticAFrameTransmittedOkMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sum of valid frames transmitted to line (MSB)." ::= { gnEthStatisticEntry 27 } gnEthStatisticIfOutOctetsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters (MSB)." ::= { gnEthStatisticEntry 28 } gnEthStatisticEtherStatsPktsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including bad packets, broadcast packets, and multicast packets) received (MSB)." ::= { gnEthStatisticEntry 29 } gnEthStatisticEtherStatsOctetsMsb OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets)." ::= { gnEthStatisticEntry 30 } gnLastDummy OBJECT IDENTIFIER ::= { ceragon 9 } gnLastDummyParam OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This parameter specifies the end of MIB." ::= { gnLastDummy 1 } -- Traps gnODUTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceODUStatus,gnGenCfgIDUSerialNumber } DESCRIPTION "The trap is sent every time an alarm occurs in the ODU." ::= 1 gnIDUTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenDrawerXDeviceIDUStatus,gnGenCfgIDUSerialNumber} DESCRIPTION "The trap is sent every time an alarm occurs in the IDU." ::= 2 gnSDHTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceRSTStatus,gnGenCfgIDUSerialNumber} DESCRIPTION "The trap is sent every time an alarm occurs in the Regenerator section in the SONET/SDH." ::= 3 gnACCESSTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgIDUSerialNumber} DESCRIPTION "The trap is sent every time an alarm occurs in an Access line." ::= 4 gnODUTrapCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceODUStatus,gnGenCfgIDUSerialNumber } DESCRIPTION "The trap is sent every time an alarm occurs in the ODU." ::= 5 gnIDUTrapCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenDrawerXDeviceIDUStatus,gnGenCfgIDUSerialNumber} DESCRIPTION "The trap is sent every time an alarm occurs in the IDU." ::= 6 gnSDHTrapCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceRSTStatus,gnGenCfgIDUSerialNumber} DESCRIPTION "The trap is sent every time an alarm occurs in the Regenerator section in the SONET/SDH." ::= 7 gnAccessTrapCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgIDUSerialNumber} DESCRIPTION "The trap is sent every time an alarm occurs in an Access line." ::= 8 -- Event Traps gnLODUPowerFailTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusPowerSupply,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local ODU Power fault occurs. " ::= 10 gnLODUSynthUnLockTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusSynthesizerVCOLock,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local ODU Hardware fault occurs ." ::= 11 gnLODUTxLevelOutOfRangeTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusTransmitLevel,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local ODU TX signal is out of range. " ::= 12 gnLODURxLevelOutOfRangeTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusReceiveLevel,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local ODU RX signal is out of range. " ::= 13 gnLODUExtremeTempTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusFahrenheitTemp,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local ODU extreme temperature event occurs. " ::= 14 gnLIDUPowerFailTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDevicePowerSupply,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local IDU Power fault occurs. " ::= 15 gnLCableFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceCable,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local IDU-ODU cable fault occurs." ::= 16 gnLModemFailTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Modem faults occurs." ::= 17 gnLIDUExtremeTempTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceFahrenheitTemp,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local IDU extreme temperature event occurs. " ::= 18 gnLLoopbackOnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loopback is activated." ::= 19 gnLRemoteCommFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the remote communication is disconnected. " ::= 20 gnLTestRunningTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstCfgTestActivate,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local SDH/SONET test is activated. " ::= 21 gnLLOFTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loss of Frame alarm occurs." ::= 22 gnLLOSTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loss of signal alarm occurs." ::= 23 gnLTIMTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Trace Identifier Mismatch alarm occurs." ::= 24 gnLEXCTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur ,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Excessive BER alarm is raised. " ::= 25 gnLSDTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Signal Degrade alarm is raised." ::= 26 gnLRcvAisTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the local terminal receives an Alarm Indication Signal (AIS)." ::= 27 gnLUnExpTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local terminal receives an unexpected signal." ::= 28 gnLLocTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loss of Clock alarm occurs." ::= 29 --- gnLLopTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loss of pointer alarm occurs." ::= 30 gnLRdiTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the local terminal receives a Remote Defect Identifier signal (RDI). " ::= 31 gnLSlmTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Signal (Payload) Label Mismatch alarm occurs." ::= 32 gnLUnqTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local unequipped signal is received. " ::= 33 --- gnLExternalAlarm1OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 1 is raised. " ::= 34 gnLExternalAlarm2OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 2 is raised. " ::= 35 gnLExternalAlarm3OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 3 is raised. " ::= 36 gnLExternalAlarm4OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 4 is raised. " ::= 37 gnLExternalAlarm5OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 5 is raised. " ::= 38 gnLExternalAlarm6OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 6 is raised. " ::= 39 gnLExternalAlarm7OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 7 is raised. " ::= 40 gnLExternalAlarm8OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 8 is raised. " ::= 41 gnLSystemFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenDrawerXInternalCommunication,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local System fault occurs." ::= 42 gnLTftpFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local TFTP Download fails." ::= 43 gnLInternalDownloadFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local internal Download fails." ::= 44 gnLIntralinkFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local intra-link download fails." ::= 45 gnLConfMismatchTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local configuration mismatch fault occurs." ::= 46 gnLProtectSwitchFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Protection fault is raised." ::= 47 gnLProtectCableFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local protection cable fault is raised." ::= 48 gnLHeartBeatTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is a periodic heart beat trap." ::= 49 gnLLomTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loss of Multi-frame alarm occurs." ::= 50 gnLHitlessProblemTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Hitless fault occurs." ::= 51 gnLHitlessRadioLofTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Hitless RadioLOF fault occurs." ::= 52 gnLHitlessCableDisconnectTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Hitless cable fault is raised. " ::= 53 gnLPamTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when system in MSP Protection Architecture Mismatch." ::= 54 gnLScmTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when there is a MSP Selector Channel Mismatch (K1,K2)." ::= 55 gnLInvTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap indicates that the received K1 byte is invalid (MSP)." ::= 56 gnLInbandTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when the Inband PPP link goes down." ::= 57 gnWSLOSTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when the Wayside channel is in LOS state." ::= 58 gnODUtoODUCableFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when there is a problem with the ODU to ODU cable - for XPIC topology only." ::= 59 gnNoSignalReceivedFromODUTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when no signal is received from the ODU." ::= 60 gnProtectionLockoutConfiguredTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when Protection lockout is configured." ::= 61 gnRFUPowerFailureTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of 12V/-5V/1.5V/6V/Vdrain power supply failure ." ::= 62 gnRFURxLevelPathOutOfRangeTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of RSL of Main/Diversity channel is very low(typically below -80dBm) ." ::= 63 gnRFUExtremeTemperatureTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of RFU temperature is too high/low ." ::= 64 gnRFUFanFailureTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of fan failure detection by RFU ." ::= 65 gnLowSignalToRFUTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of low IDM signal reception (350MHz) ." ::= 66 gnRFUXPICClockFailureTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of XPIC clock failure ." ::= 67 gnRFUDelayCalibrationFailure1Trap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent if RX AGC is not locked (-10dBm) ." ::= 68 gnRFUDelayCalibrationFailure2Trap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent if calibration cannot be done since the notch is too wide/deep ." ::= 69 gnLSFPFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Gigabit ethernet SFP fault occurs." ::= 70 gnEncryptionFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption fault occurs." ::= 71 gnEncryptionSyncLosTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption synchhronization loss occurs." ::= 72 gnEncryptionKepTimout TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption KEP Timout fault occurs." ::= 73 gnEncryptionSkTimerElapsed TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption Session Key Timer elapsed." ::= 74 gnEncryptionPowerUpSelfTestFail TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption Power Up Self Test fault occurs." ::= 75 gnEncryptionConditionalTestFail TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption Conditional Test fault occurs." ::= 76 gnEncryptionWillTurnOffOnNextRest TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption will be turned off on the next reset occurs." ::= 77 gnEncryptionEventReport TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption event report occurs." ::= 78 gnEncryptionTechCardWasDetected TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time Encryption Technician card is detected." ::= 79 gnAdminPasswordInDefaultState TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a admin password is in default state." ::= 80 gnLinkGroupingProtectionFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of Link Grouping Protection Fault." ::= 81 gnLossOfProtectionTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of Loss of Protection." ::= 82 gnTempLicenseTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of Temp License is Enable." ::= 83 gnMultiRadioProblemTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a multi radio fault occurs." ::= 84 -- ******************** gnLODUPowerOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusPowerSupply,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local ODU Power fault cleared." ::= 110 gnLODUSynthLockTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusSynthesizerVCOLock,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local ODU Hardware fault is cleared." ::= 111 gnLODUTxLevelInRangeTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusTransmitLevel,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local ODU TX signal is in range. " ::= 112 gnLODURxLevelInRangeTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusReceiveLevel,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local ODU RX signal is in range. " ::= 113 gnLODUNormalTempTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusFahrenheitTemp,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local ODU returns to normal temperature." ::= 114 gnLIDUPowerOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDevicePowerSupply,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local IDU Power fault is cleared." ::= 115 gnLCableOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceCable,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local IDU-ODU cable fault is cleared." ::= 116 gnLModemOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Modem faults is cleared. " ::= 117 gnLIDUNormalTempTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceFahrenheitTemp,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local IDU returns to normal temperature." ::= 118 gnLLoopbackOffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loopback is cleared." ::= 119 gnLRemoteCommOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the remote communication is re-connected." ::= 120 gnLNoTestRunningTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstCfgTestActivate,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local SDH/SONET test is cleared." ::= 121 gnLNoLOFTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loss of Frame alarm is cleared." ::= 122 gnLNoLOSTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loss of Signal alarm is cleared." ::= 123 gnLNoTIMTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Trace Identifier Mismatch alarm is cleared." ::= 124 gnLNoEXCTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Excessive BER alarm is cleared. " ::= 125 gnLNoSDTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Signal Degrade alarm is cleared." ::= 126 gnLNoAisTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the local terminal stops receiving an Alarm Indication Signal (AIS)." ::= 127 gnLNoUnExpTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local terminal stops receiving an unexpected signal." ::= 128 gnLNoLocTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loss of Carrier (On the FE interfaces) alarm is cleared." ::= 129 --- gnLNoLopTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loss of pointer alarm is cleared." ::= 130 gnLNoRdiTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the local terminal stops receiving a Remote Defect Identifier signal (RDI)." ::= 131 gnLNoSlmTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Signal (Payload) Label Mismatch alarm is cleared. " ::= 132 gnLNoUnqTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local terminal start receiving an equipped signal. " ::= 133 --- gnLExternalAlarm1OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 1 is cleared. " ::= 134 gnLExternalAlarm2OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 2 is cleared. " ::= 135 gnLExternalAlarm3OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 3 is cleared. " ::= 136 gnLExternalAlarm4OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 4 is cleared. " ::= 137 gnLExternalAlarm5OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 5 is cleared. " ::= 138 gnLExternalAlarm6OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 6 is cleared. " ::= 139 gnLExternalAlarm7OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 7 is cleared. " ::= 140 gnLExternalAlarm8OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local External alarm 8 is cleared." ::= 141 gnLSystemOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenDrawerXInternalCommunication,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local System fault is cleared." ::= 142 gnLTftpOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local TFTP Download succeeded." ::= 143 gnLInternalDownloadOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local internal Download succeeded." ::= 144 gnLIntralinkOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local intra-link download succeeded." ::= 145 gnLNoConfMismatchTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local configuration mismatch fault is cleared." ::= 146 gnLProtectSwitchOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "Never sent. " ::= 147 gnLProtectCableOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local protection cable fault is cleared." ::= 148 gnLLomOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Loss of Multi-frame alarm is cleared." ::= 150 gnLHitlessProblemOKTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Hitless fault is cleared." ::= 151 gnLHitlessRadioLofOKTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Hitless RadioLOF fault is cleared." ::= 152 gnLHitlessCableDisconnectOKTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Local Hitless cable fault is cleared." ::= 153 gnLPamOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when system in MSP Protection Architecture Mismatch." ::= 154 gnLScmOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when there is a MSP Selector Channel Mismatch (K1,K2)." ::= 155 gnLInvOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap indicates that the received K1 byte is invalid (MSP)." ::= 156 gnLInbandOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when the Inband PPP link goes up." ::= 157 gnWSNoLOSTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES { gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when the Wayside channel is in LOS state." ::= 158 gnODUtoODUCableOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when there is a problem with the ODU to ODU cable - for XPIC topology only." ::= 159 gnSignalReceivedFromODUTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when a signal is received from the ODU." ::= 160 gnProtectionLockoutClearededTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION " This Trap is sent when Protection lockout is cleared." ::= 161 gnRFUPowerFailureClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of 12V/-5V/1.5V/6V/Vdrain power supply failure is cleared." ::= 162 gnRFURxLevelPathOutOfRangeClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of RSL of Main/Diversity channel is not very low ." ::= 163 gnRFUExtremeTemperatureClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of RFU temperature is not too high/low ." ::= 164 gnRFUFanFailureClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent when fan failure is cleared ." ::= 165 gnLowSignalToRFUClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of not low IDM signal reception ." ::= 166 gnRFUXPICClockFailureClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case of XPIC clock failure is cleared ." ::= 167 gnRFUDelayCalibrationFailure1ClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent if RX AGC is locked ." ::= 168 gnRFUDelayCalibrationFailure2ClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent if calibration can be done ." ::= 169 gnLSFPOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Gigabit ethernet SFP fault clears." ::= 170 gnEncryptionFaultClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption fault clears." ::= 171 gnEncryptionSyncLosClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption synchronization loss fault clears." ::= 172 gnEncryptionKepTimoutCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption KEP timout fault clears." ::= 173 gnEncryptionSkTimerElapsedCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a encryption Encryption Session Key Timer elapsed fault clears." ::= 174 gnEncryptionPowerUpSelfTestFailCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption Power Up Self Test fault clears." ::= 175 gnEncryptionConditionalTestFailCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption Conditional Test fault clears." ::= 176 gnEncryptionWillTurnOffOnNextRestCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption will be turned off on the next reset clears." ::= 177 gnEncryptionEventReportCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption event report fault clears." ::= 178 gnEncryptionTechCardWasDetectedCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Encryption Technician card is detected clears." ::= 179 gnAdminPasswordInDefaultStateCleared TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a admin password is in default state clears." ::= 180 gnLinkGroupingProtectionFaultClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case the Link Grouping Protection Fault clears." ::= 181 gnLossOfProtectionClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case the Loss of Protection clears." ::= 182 gnTempLicenseClearedTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent in case the Temp License Enable clears." ::= 183 gnMultiRadioProblemOKTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a multi radio fault is cleared." ::= 184 -- ******************** gnRODUPowerFailTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusPowerSupply,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote ODU Power fault occurs." ::= 210 gnRODUSynthUnLockTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusSynthesizerVCOLock,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote ODU Hardware fault occurs ." ::= 211 gnRODUTxLevelOutOfRangeTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusTransmitLevel,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote ODU TX signal is out of range." ::= 212 gnRODURxLevelOutOfRangeTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusReceiveLevel,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote ODU RX signal is out of range." ::= 213 gnRODUExtremeTempTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusFahrenheitTemp,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote ODU extreme temperature event occurs." ::= 214 gnRIDUPowerFailTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDevicePowerSupply,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote IDU Power fault occurs." ::= 215 gnRCableFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceCable,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote IDU-ODU cable fault occurs." ::= 216 gnRModemFailTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Modem faults occurs." ::= 217 gnRIDUExtremeTempTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceFahrenheitTemp,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote IDU extreme temperature event occurs." ::= 218 gnRLoopbackOnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loopback is activated." ::= 219 gnRRemoteCommFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the remote communication is disconnected." ::= 220 gnRTestRunningTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstCfgTestActivate,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote SDH/SONET test is activated." ::= 221 gnRLOFTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loss of Frame alarm occurs." ::= 222 gnRLOSTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loss of signal alarm occurs." ::= 223 gnRTIMTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Trace Identifier Mismatch alarm occurs." ::= 224 gnREXCTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Excessive BER alarm is raised." ::= 225 gnRSDTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Signal Degrade alarm is raised." ::= 226 gnRAisTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the Remote terminal receives an Alarm Indication Signal (AIS)." ::= 227 gnRUnExpTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote terminal receives an unexpected signal." ::= 228 gnRLocTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loss of Carrier (On the FE interfaces) alarm occurs." ::= 229 --- gnRLopTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loss of pointer alarm occurs." ::= 230 gnRRdiTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the Remote terminal receives a Remote Defect Identifier signal (RDI)." ::= 231 gnRSlmTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Signal (Payload) Label Mismatch alarm occurs." ::= 232 gnRUnqTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote unequipped signal is received." ::= 233 --- gnRExternalAlarm1OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 1 is raised." ::= 234 gnRExternalAlarm2OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 2 is raised." ::= 235 gnRExternalAlarm3OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 3 is raised." ::= 236 gnRExternalAlarm4OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 4 is raised." ::= 237 gnRExternalAlarm5OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 5 is raised." ::= 238 gnRExternalAlarm6OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 6 is raised." ::= 239 gnRExternalAlarm7OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 7 is raised." ::= 240 gnRExternalAlarm8OnTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 8 is raised." ::= 241 gnRSystemFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatInternalCommunication,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote System fault occurs." ::= 242 gnRTftpFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote TFTP Download fails." ::= 243 gnRInternalDownloadFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote internal Download fails." ::= 244 gnRIntralinkFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote intra-link download fails." ::= 245 gnRConfMismatchTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote configuration mismatch fault occurs." ::= 246 gnRProtectSwitchFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Protection fault is raised." ::= 247 gnRProtectCableFaultTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote protection cable fault is raised." ::= 248 gnRHeartBeatTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is a periodic heart beat trap." ::= 249 gnRLomTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loss of Multi-frame alarm occurs." ::= 250 --gnRHitlessProblemTrap TRAP-TYPE -- ENTERPRISE ceragon -- VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} -- DESCRIPTION -- "This Trap is sent every time a Remote Hitless fault occurs." -- ::= 251 gnRHitlessRadioLofTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Hitless RadioLOF fault occurs." ::= 252 gnRHitlessCableDisconnectTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Hitless cable fault is raised." ::= 253 -- skip 254-256 (MSP PAM, SCM, INV) -- skip 257 (Inband) gnRODUPowerOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusPowerSupply,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote ODU Power fault cleared." ::= 310 gnRODUSynthLockTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusSynthesizerVCOLock,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote ODU Hardware fault is cleared." ::= 311 gnRODUTxLevelInRangeTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusTransmitLevel,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote ODU TX signal is in range." ::= 312 gnRODURxLevelInRangeTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusReceiveLevel,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote ODU RX signal is in range." ::= 313 gnRODUNormalTempTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnOduStatusFahrenheitTemp,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote ODU returns to normal temperature." ::= 314 gnRIDUPowerOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDevicePowerSupply,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote IDU Power fault is cleared." ::= 315 gnRCableOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceCable,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote IDU-ODU cable fault is cleared." ::= 316 gnRModemOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Modem faults is cleared." ::= 317 gnRIDUNormalTempTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceFahrenheitTemp,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote IDU returns to normal temperature." ::= 318 gnRLoopbackOffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loopback is cleared." ::= 319 gnRRemoteCommOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the remote communication is re-connected." ::= 320 gnRNoTestRunningTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstCfgTestActivate,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote SDH/SONET test is cleared." ::= 321 gnRNoLOFTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loss of Frame alarm is cleared." ::= 322 gnRNoLOSTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loss of Signal alarm is cleared." ::= 323 gnRNoTIMTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Trace Identifier Mismatch alarm is cleared." ::= 324 gnRNoEXCTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Excessive BER alarm is cleared." ::= 325 gnRNoSDTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnRstStatBERCur,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Signal Degrade alarm is cleared." ::= 326 gnRNoAisTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the Remote terminal stops receiving an Alarm Indication Signal (AIS)." ::= 327 gnRNoUnExpTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote terminal stops receiving an unexpected signal." ::= 328 gnRNoLocTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loss of Carrier (on the FE interfaces) alarm is cleared." ::= 329 --- gnRNoLopTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loss of pointer alarm is cleared." ::= 330 gnRNoRdiTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time the Remote terminal stops receiving a Remote Defect Identifier signal (RDI)." ::= 331 gnRNoSlmTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Signal (Payload) Label Mismatch alarm is cleared." ::= 332 gnRNoUnqTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote terminal start receiving an equipped signal." ::= 333 --- gnRExternalAlarm1OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 1 is cleared." ::= 334 gnRExternalAlarm2OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 2 is cleared." ::= 335 gnRExternalAlarm3OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 3 is cleared." ::= 336 gnRExternalAlarm4OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 4 is cleared." ::= 337 gnRExternalAlarm5OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 5 is cleared." ::= 338 gnRExternalAlarm6OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 6 is cleared." ::= 339 gnRExternalAlarm7OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 7 is cleared." ::= 340 gnRExternalAlarm8OffTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatDeviceDryContact,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote External alarm 8 is cleared." ::= 341 gnRSystemOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenStatInternalCommunication,gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote System fault is cleared." ::= 342 gnRTftpOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote TFTP Download succeeded." ::= 343 gnRInternalDownloadOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remoteinternal Download succeeded." ::= 344 gnRIntralinkOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote intra-link download succeeded." ::= 345 gnRNoConfMismatchTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote configuration mismatch fault is cleared." ::= 346 -- "positive" traps are not being send when protection switch occurs. -- gnRProtectSwitchOkTrap TRAP-TYPE -- ENTERPRISE ceragon -- VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} -- DESCRIPTION -- "Never sent." -- ::= 347 gnRProtectCableOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote protection cable fault is cleared." ::= 348 gnRLomOkTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {ifIndex, gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Loss of Multi-frame alarm is cleared." ::= 350 --gnRHitlessProblemOKTrap TRAP-TYPE -- ENTERPRISE ceragon -- VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} -- DESCRIPTION -- "This Trap is sent every time a Remote Hitless fault is cleared." -- ::= 351 gnRHitlessRadioLofOKTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Hitless RadioLOF fault is cleared." ::= 352 gnRHitlessCableDisconnectOKTrap TRAP-TYPE ENTERPRISE ceragon VARIABLES {gnGenCfgTrapSeverity , gnGenCfgAlarmText , gnGenCfgCLLI} DESCRIPTION "This Trap is sent every time a Remote Hitless cable fault is cleared." ::= 353 -- skip 354-356 (MSP PAM, SCM, INV) -- skip 357 (Inband) -- Traps #400-600 are reserved for Managment. END