1757 lines
69 KiB
Plaintext
1757 lines
69 KiB
Plaintext
-- Copyright (C) 2016 Aricent. All Rights Reserved
|
|
|
|
-- $Id: fsmpb.mib,v 1.17 2016/02/18 09:47:31 siva Exp $
|
|
|
|
ARICENT-MIPROVIDERBRIDGE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
|
|
OBJECT-TYPE,MODULE-IDENTITY,
|
|
Integer32, Unsigned32, Counter32, IpAddress, enterprises
|
|
FROM SNMPv2-SMI
|
|
RowStatus, MacAddress, TEXTUAL-CONVENTION, TruthValue
|
|
FROM SNMPv2-TC
|
|
VlanId, dot1qVlanIndex
|
|
FROM Q-BRIDGE-MIB
|
|
dot1adMIPepEntry FROM ARICENT-MIDOT1AD-MIB
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB;
|
|
|
|
futureMIProviderBridgeMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
|
|
CONTACT-INFO "support@aricent.com"
|
|
DESCRIPTION "||||||"
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION "||||||"
|
|
::= { enterprises futuresoftware(2076) 127}
|
|
|
|
TunnelStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To specify how to handle the L2 protocol packets received on a
|
|
particular port. When the option is set to 'peer', the L2 protocol
|
|
packets received on a particular port will be processed in the Bridge.
|
|
When the option is set to 'tunnel', the L2 protocol packets received
|
|
on a particular port will be transparently transmitted in the provider
|
|
network and will not be processed in the Provider Bridges/Provider Edge
|
|
Bridges. When the option is set to 'discard', the L2 protocol packets
|
|
received over a particular port will not be processed and discarded."
|
|
|
|
SYNTAX INTEGER { peer(1), tunnel(2), discard(3) }
|
|
|
|
--Proprietary MIB implementation for the Provider Bridging functionality
|
|
|
|
fsMIPbSystem OBJECT IDENTIFIER ::= { futureMIProviderBridgeMIB 1 }
|
|
fsMIPbConfig OBJECT IDENTIFIER ::= { futureMIProviderBridgeMIB 2 }
|
|
|
|
|
|
fsMIPbContextInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbContextInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the List of Provider Bridge related objects that
|
|
can be configured per Virtual Context in the system."
|
|
::= { fsMIPbSystem 1 }
|
|
|
|
fsMIPbContextInfoEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbContextInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Virtual Context based Provider Bridge objects."
|
|
INDEX { fsMIPbContextId }
|
|
::= { fsMIPbContextInfoTable 1 }
|
|
|
|
FsMIPbContextInfoEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbContextId
|
|
Integer32,
|
|
fsMIPbMulticastMacLimit
|
|
Unsigned32,
|
|
fsMIPbTunnelStpAddress
|
|
MacAddress,
|
|
fsMIPbTunnelLacpAddress
|
|
MacAddress,
|
|
fsMIPbTunnelDot1xAddress
|
|
MacAddress,
|
|
fsMIPbTunnelGvrpAddress
|
|
MacAddress,
|
|
fsMIPbTunnelGmrpAddress
|
|
MacAddress
|
|
}
|
|
|
|
fsMIPbContextId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a Virtual Context."
|
|
::= { fsMIPbContextInfoEntry 1 }
|
|
|
|
fsMIPbMulticastMacLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies MAC table size of the device. The
|
|
size SET for this object is applicable only for the Virtual Context
|
|
identified by the Virtual Context Id in this entry.The upper limit value
|
|
that can be SET for this object is limited by the underlying
|
|
hardware. While on initialisation this object hold the maximum
|
|
size of the Multicast MAC table of the device."
|
|
::= { fsMIPbContextInfoEntry 2 }
|
|
|
|
fsMIPbTunnelStpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the MAC address SET for this object is applicable
|
|
only for the Virtual Context identified by the Virtual Context Id in
|
|
this entry. The MAC address to be used for Customer STP BPDUs tunneling
|
|
inside Provider Network. When tunneling is enabled on a port, this MAC
|
|
address will be used as the the destination MAC address of the customer
|
|
BPDUs received on a port where STP tunneling is enabled and the outgoing
|
|
port is a proprietary PNP.
|
|
Inside Provider Network, the BPDUs received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
When the BPDU is sent out of the Provider Network, this MAC address
|
|
will be replaced with the reserved address defined for Customer STP
|
|
BPDUs. This configuration is allowed only for Provider Core or
|
|
Edge Bridges."
|
|
|
|
::= { fsMIPbContextInfoEntry 3 }
|
|
|
|
fsMIPbTunnelLacpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the MAC address SET for this object is applicable
|
|
only for the Virtual Context identified by the Virtual Context Id in
|
|
this entry. The MAC address to be used for LACP packets tunneling inside
|
|
Provider Network. When tunneling is enabled on a port, this MAC address
|
|
will be used as the the destination MAC address of the customer LACP
|
|
packets received over this port.
|
|
Inside Provider Network, LACP packets received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
When the tunneled LACP packets are sent out of the Provider Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for LACP packets. This configuration is allowed only for Provider Core
|
|
or Edge Bridges."
|
|
|
|
::= { fsMIPbContextInfoEntry 4 }
|
|
|
|
fsMIPbTunnelDot1xAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the MAC address SET for this object is applicable
|
|
only for the Virtual Context identified by the Virtual Context Id in
|
|
this entry. The MAC address to be used for Dot1x packets tunneling
|
|
inside Provider Network. When tunneling is enabled on a port, this MAC
|
|
address will be used as the the destination MAC address of the customer
|
|
Dot1x packets received over this port.
|
|
Inside Provider Network, Dot1x packets received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
When the tunneled Dot1x packets are sent out of the Provider Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for Dot1x packets. This configuration is allowed only for Provider Core
|
|
or Edge Bridges."
|
|
|
|
::= { fsMIPbContextInfoEntry 5 }
|
|
|
|
fsMIPbTunnelGvrpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the MAC address SET for this object is
|
|
applicable only for the Virtual Context identified by the Virtual
|
|
Context Id in this entry.
|
|
The MAC address to be used for GVRP PDUs tunneling inside Provider
|
|
Network. When tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the customer GVRP PDUs
|
|
received on a port where GVRP tunneling is enable and the outgoing
|
|
port is a proprietary PNP.
|
|
Inside Provider Network, GVRP PDUs received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
When the tunneled GVRP PDUs are sent out of the Provider Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for GVRP PDUs. This configuration is allowed only for Provider Core or
|
|
Edge Bridges."
|
|
|
|
::= { fsMIPbContextInfoEntry 6 }
|
|
|
|
fsMIPbTunnelGmrpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the MAC address SET for this object is applicable
|
|
only for the Virtual Context identified by the Virtual Context Id in
|
|
this entry. The MAC address to be used for GMRP PDUs tunneling inside
|
|
Provider Network. When tunneling is enabled on a port, this MAC address
|
|
will be used as the the destination MAC address of the customer GMRP
|
|
PDUs received over this port.
|
|
Inside Provider Network, GMRP PDUs received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
When the tunneled GMRP PDUs are sent out of the Provider Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for GMRP PDUs. This configuration is allowed only for Provider Core or
|
|
Edge Bridges."
|
|
|
|
::= { fsMIPbContextInfoEntry 7 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Provider Bridge Port Type Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a table containing provider bridge related
|
|
configurations for the externally accessible ports.
|
|
All the objects in this table are applicable
|
|
only when the Bridge Mode is set as ProviderBridge or
|
|
ProviderCoreBridge or ProviderEdgeBridge."
|
|
::= { fsMIPbConfig 1 }
|
|
|
|
fsMIPbPortInfoEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies each entry in this table representing the
|
|
Provider Bridge related port configurations. This table is indexed by
|
|
ifIndex."
|
|
|
|
INDEX { fsMIPbPort }
|
|
::= { fsMIPbPortInfoTable 1 }
|
|
|
|
FsMIPbPortInfoEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbPort Integer32,
|
|
fsMIPbPortSVlanClassificationMethod INTEGER,
|
|
fsMIPbPortSVlanIngressEtherType Integer32,
|
|
fsMIPbPortSVlanEgressEtherType Integer32,
|
|
fsMIPbPortSVlanEtherTypeSwapStatus EnabledStatus,
|
|
fsMIPbPortSVlanTranslationStatus EnabledStatus,
|
|
fsMIPbPortUnicastMacLearning EnabledStatus,
|
|
fsMIPbPortUnicastMacLimit Unsigned32,
|
|
fsMIPbPortBundleStatus EnabledStatus,
|
|
fsMIPbPortMultiplexStatus EnabledStatus
|
|
|
|
}
|
|
|
|
fsMIPbPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Index value of the port in the system for
|
|
which this entry applies. The maximum index value of the port is defined
|
|
by the system."
|
|
::= { fsMIPbPortInfoEntry 1 }
|
|
|
|
|
|
fsMIPbPortSVlanClassificationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sourceMac (1),
|
|
destinationMac (2),
|
|
cvlanSrcMac (3),
|
|
cvlanDstMac (4),
|
|
dscp (5),
|
|
cvlanDscp (6),
|
|
sourceIp (7),
|
|
destinationIp (8),
|
|
srcIpDstIp (9),
|
|
cvlanDstIp (10),
|
|
cvlan (11),
|
|
pvid (12)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of SVLAN classification that has to be used
|
|
for a given type of port. providerNetworkPort / customerNetworkPort -
|
|
Port's 'pvid' will be the SVLAN classification for the untagged packets
|
|
received over this interface.
|
|
customerEdgePort - The SVLAN classification mechanism is always based on
|
|
'cvlan' (i.e CVidRegistrationTable ).No other SVLAN classification
|
|
mechanism is allowed for this port type.
|
|
propCustomerNetworkPort / propCustomerEdgePort - 'pvid' will be
|
|
default SVLAN classification mechanism for this port. But the user is free to
|
|
configure any other SVLAN classification mechanism except the
|
|
CVidRegistrationTable (ie cvlan mechanism)
|
|
For proprietary CEP and proprietary CNP ports,the SVLAN classification
|
|
is based on one of the configured SVLAN classification methods mentioned
|
|
here. If it is not configured, by default the port's 'PVID' is considered
|
|
as the SVLAN for untagged packets."
|
|
|
|
::= { fsMIPbPortInfoEntry 2 }
|
|
|
|
fsMIPbPortSVlanIngressEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
|
|
"This object specifies the S-VLAN tag ether type used for the packets
|
|
received on this port.Packets received on a port are considered tagged,
|
|
when the packet ethertype matches with the port ether type configured.
|
|
Otherwise, they will be considered untagged.
|
|
By default, on all the ports, 0x88a8 will be configured as the ether type.
|
|
On Proprietary Provider Network Ports 0x8100 will be configured as the
|
|
ingress ethertype. This object is deprecated. The new MIB object
|
|
fsMIDot1qFutureVlanPortIngressEtherType indicates the Ingress Ethertype for
|
|
a port."
|
|
|
|
DEFVAL { 34984 }
|
|
::= { fsMIPbPortInfoEntry 3 }
|
|
|
|
fsMIPbPortSVlanEgressEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the ether type of the S-VLAN tag that has to
|
|
be applied for all the outgoing packets on this port. If a valid value is
|
|
in this object, all the packets which are outgoing on this port will
|
|
contain the ether type as configured in this object. By Default 0x88a8
|
|
will be used for packets transmitted with S-VLAN on the ports.
|
|
On Proprietary Provider Network Ports and Customer Edge Ports, 0x8100
|
|
will be used as the ether type for the outgoing packets.
|
|
This object is deprecated. The new MIB object
|
|
fsMIDot1qFutureVlanPortEgressEtherType indicates the Egress Ethertype for a
|
|
port."
|
|
|
|
DEFVAL { 34984 }
|
|
::= { fsMIPbPortInfoEntry 4}
|
|
|
|
fsMIPbPortSVlanEtherTypeSwapStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the Ether Type Swapping can be
|
|
applied on the S-VLAN tagged packets over this port.
|
|
The Ether type swapping will only be applied on S-VLAN tag of a packet.
|
|
This configuration is applicable for all values of Port Type other
|
|
than customer edge ports."
|
|
DEFVAL { disabled }
|
|
::= { fsMIPbPortInfoEntry 5 }
|
|
|
|
fsMIPbPortSVlanTranslationStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the VID Translation table can be
|
|
enabled on the incoming/outgoing packets on a particular port.
|
|
The Service Vlan swapping is applicable only for the externally
|
|
accessible network ports (i.e.) Provider Network Port ,Customer Network port
|
|
and proprietary Customer Network Port. The Service Vlan Translation status
|
|
can be enabled or disabled on per port basis. By default, it is enabled on
|
|
Provider Network Port and Customer Network Port(S-Tagged) and disabled on
|
|
the other applicable port-types."
|
|
::= { fsMIPbPortInfoEntry 6 }
|
|
|
|
fsMIPbPortUnicastMacLearning OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies a Truth value indicating the unicast MAC learning enabled/disabled
|
|
status for this port. When Unicast Mac Learning is disabled, No
|
|
Entry will be learned from the point of configuration on this port.
|
|
When Mac Learning is enabled, Entries will be learned on this port."
|
|
DEFVAL { enabled }
|
|
::= { fsMIPbPortInfoEntry 7 }
|
|
|
|
fsMIPbPortUnicastMacLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Limiting value on the number of distinct unicast destination MAC
|
|
addresses that can be dynamically learnt over this interface.
|
|
The lower limit and upper limit value that can be SET for this object
|
|
is determined by the underlying hardware. This Limit is applicable for
|
|
only dynamically learned entries and NOT for static unicast
|
|
entries."
|
|
::= { fsMIPbPortInfoEntry 8 }
|
|
|
|
fsMIPbPortBundleStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the a truth value indicating that Bundling
|
|
enabled/disabled on port, this Object can be enabled/disabled only for
|
|
CEP. For other ports setting and getting is not meaningful."
|
|
DEFVAL { enabled }
|
|
::= { fsMIPbPortInfoEntry 9 }
|
|
|
|
fsMIPbPortMultiplexStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a Truth value indicating that Bundling
|
|
enabled/disabled on port, this Object can be enabled/disabled only for
|
|
CEP. For other ports setting and getting is not meaningful."
|
|
DEFVAL { enabled }
|
|
::= { fsMIPbPortInfoEntry 10 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port , SourceMAC based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbSrcMacSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbSrcMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a table containing per port, per SourceMAC based
|
|
Service VLAN classification information in the device. Entries can be
|
|
into this table only when the bridge is configured as a Provider Bridge
|
|
and the Port Type for this port is SET as Proprietary Customer
|
|
Edge Port / Proprietary Customer Network Port."
|
|
::= { fsMIPbConfig 2 }
|
|
|
|
fsMIPbSrcMacSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbSrcMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Information controlling Service VLAN classification at this
|
|
specified port for an ingress frame with the specified Source
|
|
MAC address in the ethernet header of the frame."
|
|
INDEX { fsMIPbPort, fsMIPbSrcMacAddress }
|
|
::= { fsMIPbSrcMacSVlanTable 1 }
|
|
|
|
FsMIPbSrcMacSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbSrcMacAddress MacAddress,
|
|
fsMIPbSrcMacSVlan VlanId,
|
|
fsMIPbSrcMacRowStatus RowStatus
|
|
}
|
|
|
|
fsMIPbSrcMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Source MAC address present in the ethernet header of the
|
|
frame received on this port for which Service VLAN is assigned
|
|
based on this entry."
|
|
::= { fsMIPbSrcMacSVlanEntry 1 }
|
|
|
|
fsMIPbSrcMacSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Service VLAN ID assigned to frames received on this port when
|
|
the Source MAC address in the ethernet header of the frame is same
|
|
as specified in this entry."
|
|
::= { fsMIPbSrcMacSVlanEntry 2 }
|
|
|
|
fsMIPbSrcMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
be deleted when this object is SET 'destroy'."
|
|
::= { fsMIPbSrcMacSVlanEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port , DestinationMAC based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbDstMacSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbDstMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a table containing per port, per Destination MAC based Service
|
|
VLAN classification information in the device. Entries can be
|
|
configured into this table only when the bridge is configured
|
|
as a Provider Bridge. An entry in this table is possible only when the
|
|
'Port Type' for this port is SET as Proprietary Customer Network Port
|
|
or Proprietary Customer Edge Port."
|
|
::= { fsMIPbConfig 3 }
|
|
|
|
fsMIPbDstMacSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbDstMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Information controlling Service VLAN classification at this
|
|
specified port for an ingress frame with the specified Destination MAC
|
|
address in the ethernet header of the frame."
|
|
INDEX { fsMIPbPort, fsMIPbDstMacAddress }
|
|
::= { fsMIPbDstMacSVlanTable 1 }
|
|
|
|
FsMIPbDstMacSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbDstMacAddress MacAddress,
|
|
fsMIPbDstMacSVlan VlanId,
|
|
fsMIPbDstMacRowStatus RowStatus
|
|
}
|
|
|
|
fsMIPbDstMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Destination MAC address present in the ethernet header of the
|
|
frame received on this port for which Service VLAN is assigned
|
|
based on this entry."
|
|
::= { fsMIPbDstMacSVlanEntry 1 }
|
|
|
|
|
|
fsMIPbDstMacSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Service VLAN ID assigned to frames received on this port when
|
|
the Destination MAC address in the ethernet header of the frame is
|
|
same as specified in this entry."
|
|
::= { fsMIPbDstMacSVlanEntry 2 }
|
|
|
|
fsMIPbDstMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
::= { fsMIPbDstMacSVlanEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port , C-VLAN, Source MAC based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbCVlanSrcMacSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbCVlanSrcMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the a table containing per Port, per Customer VLAN ID,
|
|
per Source MAC based S-VLAN classification information in the device.
|
|
Entries can be configured into this table only when the bridge is
|
|
configured as a Provider Bridge. An entry in this table is
|
|
possible only when the 'PortType' for this port is SET as
|
|
Proprietary Customer Edge Port / Proprietary Customer Network Port."
|
|
::= { fsMIPbConfig 4 }
|
|
|
|
fsMIPbCVlanSrcMacSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbCVlanSrcMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Information controlling Service VLAN classification at this specified
|
|
port for an ingress frame with the classified Customer VLAN ID and
|
|
with the specified Source MAC address in the ethernet header of the frame.
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
INDEX { fsMIPbPort, fsMIPbCVlanSrcMacCVlan, fsMIPbCVlanSrcMacAddr }
|
|
::= { fsMIPbCVlanSrcMacSVlanTable 1 }
|
|
|
|
FsMIPbCVlanSrcMacSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbCVlanSrcMacCVlan VlanId,
|
|
fsMIPbCVlanSrcMacAddr MacAddress,
|
|
fsMIPbCVlanSrcMacSVlan VlanId,
|
|
fsMIPbCVlanSrcMacRowStatus RowStatus
|
|
}
|
|
|
|
fsMIPbCVlanSrcMacCVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Customer VLAN ID in the Customer VLAN tag of an ingress frame
|
|
at this specified port OR the Customer VLAN ID for which the ingress
|
|
frame is classified to this specified port."
|
|
::= { fsMIPbCVlanSrcMacSVlanEntry 1 }
|
|
|
|
fsMIPbCVlanSrcMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Source MAC address in the ethernet header of the
|
|
frame received on this port."
|
|
::= { fsMIPbCVlanSrcMacSVlanEntry 2 }
|
|
|
|
fsMIPbCVlanSrcMacSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Service VLAN assigned to frames received on this port,
|
|
When the Classified Customer VLAN ID is same as specified in
|
|
this entry and When the Source MAC address in the ethernet header
|
|
of the frame is same as specified in this entry.
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
::= { fsMIPbCVlanSrcMacSVlanEntry 3 }
|
|
|
|
fsMIPbCVlanSrcMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsMIPbCVlanSrcMacSVlanEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port , C-VLAN, Destination MAC based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbCVlanDstMacSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbCVlanDstMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a table containing per Port, per Customer VLAN ID,
|
|
per Destination MAC based S-VLAN classification information in the
|
|
device. Entries can be configured into this table only when the
|
|
bridge is configured as a Provider Bridge. An entry in this table
|
|
is possible only when the 'Port Type' for this port is SET
|
|
as Proprietary Customer Edge Port / Proprietary Customer Network Port."
|
|
|
|
::= { fsMIPbConfig 5 }
|
|
|
|
fsMIPbCVlanDstMacSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbCVlanDstMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Information controlling Service VLAN classification at this specified
|
|
port for an ingress frame with the classified Customer VLAN ID and
|
|
with the specified Destination MAC address in the ethernet header of
|
|
the frame. Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
INDEX { fsMIPbPort, fsMIPbCVlanDstMacCVlan, fsMIPbCVlanDstMacAddr }
|
|
::= { fsMIPbCVlanDstMacSVlanTable 1 }
|
|
|
|
FsMIPbCVlanDstMacSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbCVlanDstMacCVlan VlanId,
|
|
fsMIPbCVlanDstMacAddr MacAddress,
|
|
fsMIPbCVlanDstMacSVlan VlanId,
|
|
fsMIPbCVlanDstMacRowStatus RowStatus
|
|
}
|
|
|
|
fsMIPbCVlanDstMacCVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Customer VLAN ID in the Customer VLAN tag of an ingress frame
|
|
at this specified port or the Customer VLAN ID for which the ingress
|
|
frame is classified for at this specified port."
|
|
::= { fsMIPbCVlanDstMacSVlanEntry 1 }
|
|
|
|
fsMIPbCVlanDstMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Destination MAC address in the ethernet header of the
|
|
frame received on this port."
|
|
::= { fsMIPbCVlanDstMacSVlanEntry 2 }
|
|
|
|
fsMIPbCVlanDstMacSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Service VLAN assigned to frames received on this port
|
|
when the Classified Customer VLAN ID and when the Destination
|
|
MAC address in the ethernet header of the frame is same as
|
|
specified in this entry. Classification of Customer VLAN ID may be from
|
|
the Customer VLAN tag in the received frame OR based on Port CVLAN table."
|
|
::= { fsMIPbCVlanDstMacSVlanEntry 3 }
|
|
|
|
fsMIPbCVlanDstMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsMIPbCVlanDstMacSVlanEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port , DSCP based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbDscpSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbDscpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a table containing per port, per DiffServ
|
|
Code Point (DSCP) value based Service VLAN classification information
|
|
in the device. Entries can be configured into this table only when the bridge is
|
|
configured as a Provider Bridge and the 'PortType' for
|
|
this port is SET as Proprietary Customer Network Port or
|
|
Proprietary Customer Edge Port."
|
|
|
|
::= { fsMIPbConfig 6 }
|
|
|
|
fsMIPbDscpSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbDscpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Information controlling Service VLAN
|
|
classification at this specified port for an ingress IP frame with the
|
|
DSCP value as specified in this entry."
|
|
INDEX { fsMIPbPort, fsMIPbDscp }
|
|
::= { fsMIPbDscpSVlanTable 1 }
|
|
|
|
FsMIPbDscpSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbDscp Integer32,
|
|
fsMIPbDscpSVlan VlanId,
|
|
fsMIPbDscpRowStatus RowStatus
|
|
}
|
|
|
|
fsMIPbDscp OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the DSCP value in the IP header of the
|
|
frame received on this port for which Service VLAN is assigned based
|
|
on this entry."
|
|
::= { fsMIPbDscpSVlanEntry 1 }
|
|
|
|
|
|
fsMIPbDscpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Service VLAN ID assigned to IP
|
|
frames received on this port when the DSCP value in the IP header of
|
|
the frame is same as specified in this entry."
|
|
::= { fsMIPbDscpSVlanEntry 2 }
|
|
|
|
fsMIPbDscpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of this
|
|
entry. An entry is created in this table when this object is SET to
|
|
'createAndWait'. The entry in this table is used when the status of
|
|
this object is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsMIPbDscpSVlanEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port ,C-VLAN and DSCP based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbCVlanDscpSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbCVlanDscpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a table containing per port, per Customer
|
|
VLAN ID, per DiffServ Code Point (DSCP) value based Service VLAN
|
|
classification information in the device. Entries can be configured
|
|
into this table only when the bridge is configured as a Provider Bridge
|
|
and the 'PortType' for this port is SET as Proprietary Customer Edge
|
|
Port / Proprietary Customer Network Port."
|
|
|
|
::= { fsMIPbConfig 7 }
|
|
|
|
fsMIPbCVlanDscpSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbCVlanDscpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Information controlling Service VLAN
|
|
classification at this specified port for an ingress IP frame with the
|
|
classified Customer VLAN ID as specified in this entry and the DSCP value
|
|
in the frame as specified in this entry.
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
INDEX { fsMIPbPort, fsMIPbCVlanDscpCVlan, fsMIPbCVlanDscp }
|
|
::= { fsMIPbCVlanDscpSVlanTable 1 }
|
|
|
|
FsMIPbCVlanDscpSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbCVlanDscpCVlan VlanId,
|
|
fsMIPbCVlanDscp Integer32,
|
|
fsMIPbCVlanDscpSVlan VlanId,
|
|
fsMIPbCVlanDscpRowStatus RowStatus
|
|
}
|
|
|
|
fsMIPbCVlanDscpCVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Customer VLAN ID in the Customer
|
|
VLAN tag of an ingress frame at this specified port or the Customer
|
|
VLAN ID for which the ingress frame is classified for at this specified port."
|
|
::= { fsMIPbCVlanDscpSVlanEntry 1 }
|
|
|
|
fsMIPbCVlanDscp OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the DSCP value in the IP header of the
|
|
frame received on this port."
|
|
::= { fsMIPbCVlanDscpSVlanEntry 2 }
|
|
|
|
|
|
fsMIPbCVlanDscpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Service VLAN ID assigned to frames
|
|
received on this port, when the classified Customer VLAN ID is the
|
|
same as specified in this entry and when the DSCP value in the
|
|
IP header of the frame is same as specified in this entry.
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
::= { fsMIPbCVlanDscpSVlanEntry 3 }
|
|
|
|
fsMIPbCVlanDscpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of this
|
|
entry. An entry is created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsMIPbCVlanDscpSVlanEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port ,Source IP Address based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbSrcIpAddrSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbSrcIpAddrSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a table containing per port, per Source IP
|
|
Address, based Service VLAN classification information in the device.
|
|
Entries can be configured into this table only when the bridge is
|
|
configured as a Provider Bridge and the 'PortType' for this port is SET as
|
|
Proprietary Customer Network Port or Proprietary Customer Edge Port."
|
|
::= { fsMIPbConfig 8 }
|
|
|
|
fsMIPbSrcIpAddrSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbSrcIpAddrSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Information controlling Service VLAN
|
|
classification at this specified port for an ingress IP frame with the
|
|
Source IP Address in the IP header of the frame as specified in this entry."
|
|
INDEX { fsMIPbPort, fsMIPbSrcIpAddr }
|
|
::= { fsMIPbSrcIpAddrSVlanTable 1 }
|
|
|
|
FsMIPbSrcIpAddrSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbSrcIpAddr IpAddress,
|
|
fsMIPbSrcIpSVlan VlanId,
|
|
fsMIPbSrcIpRowStatus RowStatus
|
|
}
|
|
|
|
fsMIPbSrcIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Source IP Address in the IP header of an ingress
|
|
IP frame at this specified port."
|
|
::= { fsMIPbSrcIpAddrSVlanEntry 1 }
|
|
|
|
fsMIPbSrcIpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service VLAN ID assigned to frames ingress at this port
|
|
when the Source IP address in the IP header of the frame is
|
|
same as specified in this entry."
|
|
::= { fsMIPbSrcIpAddrSVlanEntry 2 }
|
|
|
|
fsMIPbSrcIpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsMIPbSrcIpAddrSVlanEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port ,Destination IP Address based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbDstIpAddrSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbDstIpAddrSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a table containing per port, per Destination IP Address, based
|
|
Service VLAN classification information in the device. Entries can
|
|
be configured into this table only when the bridge is configured as
|
|
a Provider Bridge and the 'PortType' for this port is SET
|
|
as Proprietary Customer Network Port or Proprietary Customer Edge Port."
|
|
::= { fsMIPbConfig 9 }
|
|
|
|
fsMIPbDstIpAddrSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbDstIpAddrSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Information controlling Service VLAN classification at this
|
|
specified port for an ingress IP frame with the Destination IP
|
|
Address in the IP header of the frame as specified in this entry."
|
|
INDEX { fsMIPbPort, fsMIPbDstIpAddr }
|
|
::= { fsMIPbDstIpAddrSVlanTable 1 }
|
|
|
|
FsMIPbDstIpAddrSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbDstIpAddr IpAddress,
|
|
fsMIPbDstIpSVlan VlanId,
|
|
fsMIPbDstIpRowStatus RowStatus
|
|
}
|
|
|
|
fsMIPbDstIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Destination IP Address in the IP header of an ingress
|
|
IP frame at this specified port."
|
|
::= { fsMIPbDstIpAddrSVlanEntry 1 }
|
|
|
|
fsMIPbDstIpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Service VLAN ID assigned to frames
|
|
ingress at this port when the Destination IP address in the IP header
|
|
of the frame is same as specified in this entry."
|
|
::= { fsMIPbDstIpAddrSVlanEntry 2 }
|
|
|
|
fsMIPbDstIpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
::= { fsMIPbDstIpAddrSVlanEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port ,SourceIP Address, DestinationIP Address based
|
|
-- Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbSrcDstIpSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbSrcDstIpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a table containing per port, per Source IP Address,
|
|
per Destination IP Address based Service VLAN classification information
|
|
in the device. Entries can be configured into this table only when the bridge
|
|
is configured as a Provider Bridge and the'PortType' for
|
|
this port is SET as Proprietary Customer Network Port or Proprietary
|
|
Customer Edge Port."
|
|
::= { fsMIPbConfig 10}
|
|
|
|
fsMIPbSrcDstIpSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbSrcDstIpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies Information controlling Service VLAN classification at this
|
|
specified port for an ingress IP frame with the Source and Destination
|
|
IP Address in the IP header of the frame as specified in this entry."
|
|
INDEX { fsMIPbPort, fsMIPbSrcDstSrcIpAddr, fsMIPbSrcDstDstIpAddr }
|
|
::= { fsMIPbSrcDstIpSVlanTable 1 }
|
|
|
|
FsMIPbSrcDstIpSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbSrcDstSrcIpAddr IpAddress,
|
|
fsMIPbSrcDstDstIpAddr IpAddress,
|
|
fsMIPbSrcDstIpSVlan VlanId,
|
|
fsMIPbSrcDstIpRowStatus RowStatus
|
|
}
|
|
|
|
fsMIPbSrcDstSrcIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Source IP Address in the IP header of an ingress
|
|
IP frame at this specified port."
|
|
::= { fsMIPbSrcDstIpSVlanEntry 1 }
|
|
|
|
fsMIPbSrcDstDstIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Destination IP Address in the IP header of an ingress
|
|
IP frame at this specified port."
|
|
::= { fsMIPbSrcDstIpSVlanEntry 2 }
|
|
|
|
|
|
fsMIPbSrcDstIpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Service VLAN ID assigned to frames ingress at this port
|
|
when the Source and Destination IP address in the IP header of
|
|
the frame are same as specified in this entry."
|
|
::= { fsMIPbSrcDstIpSVlanEntry 3 }
|
|
|
|
fsMIPbSrcDstIpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsMIPbSrcDstIpSVlanEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port ,Customer VLAN ID, Destination IP Address based
|
|
-- Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbCVlanDstIpSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbCVlanDstIpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the A table containing per port, per Customer
|
|
VLAN ID, per Destination IP Address, based Service VLAN classification information in the
|
|
device. Entries can be configured into this table only when the bridge
|
|
is configured as Provider Bridge or Provider Edge Bridge and the
|
|
Port Type for this port is SET as Proprietary Customer Edge Port
|
|
/ Proprietary Customer Network Port."
|
|
::= { fsMIPbConfig 11 }
|
|
|
|
fsMIPbCVlanDstIpSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbCVlanDstIpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Information controlling Service VLAN classification at this specified
|
|
port for an ingress IP frame with the classified Customer VLAN ID as
|
|
specified in this entry and the Destination IP Address in the IP header
|
|
of the frame as specified in this entry.
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
INDEX { fsMIPbPort, fsMIPbCVlanDstIpCVlan, fsMIPbCVlanDstIp }
|
|
::= { fsMIPbCVlanDstIpSVlanTable 1 }
|
|
|
|
FsMIPbCVlanDstIpSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbCVlanDstIpCVlan VlanId,
|
|
fsMIPbCVlanDstIp IpAddress,
|
|
fsMIPbCVlanDstIpSVlan VlanId,
|
|
fsMIPbCVlanDstIpRowStatus RowStatus
|
|
}
|
|
|
|
fsMIPbCVlanDstIpCVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Customer VLAN ID in the Customer VLAN tag of an ingress frame
|
|
at this specified port or the Customer VLAN ID for which the ingress
|
|
frame is classified for at this specified port."
|
|
::= { fsMIPbCVlanDstIpSVlanEntry 1 }
|
|
|
|
fsMIPbCVlanDstIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Destination IP Address in the IP header of an ingress
|
|
IP frame at this specified port."
|
|
::= { fsMIPbCVlanDstIpSVlanEntry 2 }
|
|
|
|
fsMIPbCVlanDstIpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Service VLAN ID assigned to frames ingress at this port
|
|
when the classified Customer VLAN ID is same as specified in this entry
|
|
and the Destination IP address in the IP header of the frame is same
|
|
as specified in this entry. Classification of Customer VLAN ID may be
|
|
from the Customer VLAN tag in the received frame OR based on Port CVLAN table."
|
|
::= { fsMIPbCVlanDstIpSVlanEntry 3 }
|
|
|
|
fsMIPbCVlanDstIpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsMIPbCVlanDstIpSVlanEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The C-VLAN Port based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbPortBasedCVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbPortBasedCVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a table containing Customer Edge Port / Proprietary
|
|
Customer Edge Port / Proprietary Customer Network Port mapping to Customer VLAN on a
|
|
providerBridge. This table is used for a classifying a untagged frame
|
|
received on above mentioned customer ports."
|
|
::= { fsMIPbConfig 12 }
|
|
|
|
fsMIPbPortBasedCVlanEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbPortBasedCVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies an Entry in this table which will be
|
|
created whenever a port is configured as Customer Edge Port / Proprietary
|
|
Customer Edge Port / Proprietary Customer
|
|
Network Port. This Entry will be used on the ingress frame on the specified
|
|
ports based on enabled status for classifying the frame to CVLAN. Also
|
|
the Entry will be deleted in this table, when the port type is modified
|
|
anything other than the specified one."
|
|
INDEX { fsMIPbPort }
|
|
::= { fsMIPbPortBasedCVlanTable 1 }
|
|
|
|
FsMIPbPortBasedCVlanEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbPortCVlan VlanId,
|
|
fsMIPbPortCVlanClassifyStatus EnabledStatus,
|
|
fsMIPbPortEgressUntaggedStatus INTEGER
|
|
}
|
|
|
|
fsMIPbPortCVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Customer VLAN ID assigned to untagged frames ingress at this
|
|
specified Customer Edge Port / Proprietary Customer Edge Port /
|
|
Proprietary Customer Network Port."
|
|
::= { fsMIPbPortBasedCVlanEntry 1 }
|
|
|
|
fsMIPbPortCVlanClassifyStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the C-VLAN classification status on a port.
|
|
This Object can be enabled/disabled only for PropCEP/PropCNP. For CEP,
|
|
this object cannot be disabled."
|
|
DEFVAL { enabled }
|
|
::= { fsMIPbPortBasedCVlanEntry 2 }
|
|
|
|
fsMIPbPortEgressUntaggedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { allow(1), deny(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether to allow or drop untagged packets
|
|
from being transmitted on CEP port. When it is set to allow, untagged packets
|
|
will be allowed to be transmitted on CEP port. By default, the object is set
|
|
to deny which will drop untagged packets from being transmitted on CEP port."
|
|
DEFVAL { deny }
|
|
::= { fsMIPbPortBasedCVlanEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- EtherType SwappingTable
|
|
-- -------------------------------------------------------------
|
|
|
|
fsMIPbEtherTypeSwapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbEtherTypeSwapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a Table containing the Translation information of the ethertype for a
|
|
Service VLAN in a given packet. This Table shall be used only at ingress
|
|
and NOT at egress of the Customer Network Port / Proprietary Customer Network
|
|
Port / Provider Network Port. This translation table is applicable for only
|
|
Service VLAN and not for customer VLAN's."
|
|
::= { fsMIPbConfig 13 }
|
|
|
|
fsMIPbEtherTypeSwapEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbEtherTypeSwapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the entry containing the Local and Relay Ether type for a given packet on
|
|
a particular port. This entry shall be applicable on all types of ports
|
|
if and only if fsMIPbPortSVlanEtherTypeSwapStatus is Enabled on that Port."
|
|
INDEX { fsMIPbPort, fsMIPbLocalEtherType}
|
|
::= { fsMIPbEtherTypeSwapTable 1 }
|
|
|
|
FsMIPbEtherTypeSwapEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbLocalEtherType Integer32,
|
|
fsMIPbRelayEtherType Integer32,
|
|
fsMIPbEtherTypeSwapRowStatus RowStatus
|
|
}
|
|
|
|
fsMIPbLocalEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Ether type present in the service vlan tag of the ingress packet at
|
|
the given port."
|
|
::= { fsMIPbEtherTypeSwapEntry 1 }
|
|
|
|
fsMIPbRelayEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Relay Ether type mapped for the ether type present in the local
|
|
service vlan tag of the ingress packet at the given port."
|
|
::= { fsMIPbEtherTypeSwapEntry 2 }
|
|
|
|
fsMIPbEtherTypeSwapRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
be deleted when this object is SET 'destroy'."
|
|
::= { fsMIPbEtherTypeSwapEntry 3 }
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- S-VLAN configuration table
|
|
-- ----------------------------------------------------------------
|
|
fsMIPbSVlanConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbSVlanConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the table to configure the service type supported by
|
|
an S-VLAN. Based on the service type configured for the S-VLAN, the oper point-to-point
|
|
state of PEP ports will be determined. The service type SET for S-VLAN is
|
|
applicable only for the S-VLAN in specified Virtual Context identified by
|
|
the Virtual Context identifier in this entry."
|
|
|
|
::= { fsMIPbConfig 14 }
|
|
|
|
fsMIPbSVlanConfigEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbSVlanConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This object specifies the service type can be configured for an S-VLAN only when the VLAN
|
|
is already created in the system."
|
|
|
|
INDEX { fsMIPbContextId, dot1qVlanIndex }
|
|
::= { fsMIPbSVlanConfigTable 1 }
|
|
|
|
FsMIPbSVlanConfigEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbSVlanConfigServiceType INTEGER
|
|
}
|
|
|
|
fsMIPbSVlanConfigServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eLine (1),
|
|
eLan (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the service type supported by the S-VLAN in the
|
|
Virtual Context. When it is set to 'eLine', the S-VLAN connects not more
|
|
than two customer interfaces. If the service type for a vlan is 'eLine',
|
|
then learning member ports through GVRP will not be allowed.
|
|
Hence the oper point-to-point state of the PEPs connecting the S-VLAN can
|
|
be set to True for specified Virtual Context.
|
|
When it is set to 'eLan', the S-VLAN connects more than two customer
|
|
interfaces.So, the oper point-to-point state of the PEPs connecting the
|
|
S-VLAN will be set to False for specified Virtual Context.
|
|
In case of IVL, When the service type is set to E-Line for a VLAN,
|
|
the MAC learning status will be set to 'disabled'. When it is set
|
|
to E-LAN, MAC learning status will be enabled for that VLAN."
|
|
|
|
::= { fsMIPbSVlanConfigEntry 1 }
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- Tunnel protocol configuration table
|
|
-- ----------------------------------------------------------------
|
|
fsMIPbTunnelProtocolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbTunnelProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the table containing information about the handling (Tunnel/Peer/
|
|
Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x
|
|
and IGMP) inside service provider network."
|
|
::= { fsMIPbConfig 15 }
|
|
|
|
fsMIPbTunnelProtocolEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbTunnelProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
|
|
protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port.
|
|
This table is supported only for Provider Core or Provider Edge
|
|
Bridges."
|
|
|
|
INDEX { fsMIPbPort }
|
|
::= { fsMIPbTunnelProtocolTable 1 }
|
|
|
|
FsMIPbTunnelProtocolEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbTunnelProtocolDot1x TunnelStatus,
|
|
fsMIPbTunnelProtocolLacp TunnelStatus,
|
|
fsMIPbTunnelProtocolStp TunnelStatus,
|
|
fsMIPbTunnelProtocolGvrp TunnelStatus,
|
|
fsMIPbTunnelProtocolGmrp TunnelStatus,
|
|
fsMIPbTunnelProtocolIgmp TunnelStatus
|
|
}
|
|
|
|
fsMIPbTunnelProtocolDot1x OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the object to specify whether to
|
|
peer/tunnel/discard the Dot1x packets received on this port."
|
|
::= { fsMIPbTunnelProtocolEntry 1 }
|
|
|
|
fsMIPbTunnelProtocolLacp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies whether to peer/tunnel/discard the LACP packets
|
|
received on this port."
|
|
::= { fsMIPbTunnelProtocolEntry 2 }
|
|
|
|
fsMIPbTunnelProtocolStp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies whether to peer/tunnel/discard the STP packets
|
|
received on this port."
|
|
::= { fsMIPbTunnelProtocolEntry 3 }
|
|
|
|
fsMIPbTunnelProtocolGvrp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies whether to peer/tunnel/discard the GVRP packets
|
|
received on this port."
|
|
::= { fsMIPbTunnelProtocolEntry 4 }
|
|
|
|
fsMIPbTunnelProtocolGmrp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies whether to peer/tunnel/discard the GMRP packets
|
|
received on this port."
|
|
::= { fsMIPbTunnelProtocolEntry 5 }
|
|
|
|
fsMIPbTunnelProtocolIgmp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies whether to peer/tunnel/discard the IGMP packets
|
|
received on this port."
|
|
::= { fsMIPbTunnelProtocolEntry 6 }
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- Tunnel protocol statistics table
|
|
-- ----------------------------------------------------------------
|
|
fsMIPbTunnelProtocolStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbTunnelProtocolStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the table containing statistics information about the tunneled
|
|
Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) received
|
|
and transmitted over a port."
|
|
::= { fsMIPbConfig 16 }
|
|
|
|
fsMIPbTunnelProtocolStatsEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbTunnelProtocolStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
|
|
protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port.
|
|
This table is supported only for Provider Core or Provider Edge
|
|
Bridges."
|
|
|
|
INDEX { fsMIPbPort }
|
|
::= { fsMIPbTunnelProtocolStatsTable 1 }
|
|
|
|
FsMIPbTunnelProtocolStatsEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbTunnelProtocolDot1xPktsRecvd Counter32,
|
|
fsMIPbTunnelProtocolDot1xPktsSent Counter32,
|
|
fsMIPbTunnelProtocolLacpPktsRecvd Counter32,
|
|
fsMIPbTunnelProtocolLacpPktsSent Counter32,
|
|
fsMIPbTunnelProtocolStpPDUsRecvd Counter32,
|
|
fsMIPbTunnelProtocolStpPDUsSent Counter32,
|
|
fsMIPbTunnelProtocolGvrpPDUsRecvd Counter32,
|
|
fsMIPbTunnelProtocolGvrpPDUsSent Counter32,
|
|
fsMIPbTunnelProtocolGmrpPktsRecvd Counter32,
|
|
fsMIPbTunnelProtocolGmrpPktsSent Counter32,
|
|
fsMIPbTunnelProtocolIgmpPktsRecvd Counter32,
|
|
fsMIPbTunnelProtocolIgmpPktsSent Counter32
|
|
}
|
|
|
|
fsMIPbTunnelProtocolDot1xPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled Dot1x Packets received."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 1 }
|
|
|
|
fsMIPbTunnelProtocolDot1xPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled Dot1x Packets transmitted."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 2 }
|
|
|
|
fsMIPbTunnelProtocolLacpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled LACP Packets received."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 3 }
|
|
|
|
fsMIPbTunnelProtocolLacpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled LACP packets transmitted."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 4 }
|
|
|
|
fsMIPbTunnelProtocolStpPDUsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled STP PDUs received."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 5 }
|
|
|
|
fsMIPbTunnelProtocolStpPDUsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled STP PDUs transmitted."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 6 }
|
|
|
|
fsMIPbTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled GVRP PDUs received."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 7 }
|
|
|
|
fsMIPbTunnelProtocolGvrpPDUsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled GVRP PDUs transmitted."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 8 }
|
|
|
|
fsMIPbTunnelProtocolGmrpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled GMRP PDUs packets received."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 9 }
|
|
|
|
fsMIPbTunnelProtocolGmrpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled GMRP packets transmitted."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 10 }
|
|
|
|
fsMIPbTunnelProtocolIgmpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunneled IGMP packets received."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 11 }
|
|
|
|
fsMIPbTunnelProtocolIgmpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the number of tunnelled IGMP packets transmitted."
|
|
::= { fsMIPbTunnelProtocolStatsEntry 12 }
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- Provider Edge Port configuration table
|
|
-- ----------------------------------------------------------------
|
|
|
|
fsMIPbPepExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbPepExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies an extension of dot1adMIPepTable table, and it provides
|
|
additional configurations to PEPs (like Cos Preservations,..).
|
|
when a entry in dot1adMIPepTable is created, then an entry will be
|
|
created in this table."
|
|
|
|
::= { fsMIPbConfig 17 }
|
|
|
|
fsMIPbPepExtEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbPepExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"This object specifies the entry containing information like
|
|
(COS preservation, ..) for the internal PEPs. Creation of an entry in this
|
|
table is not allowed and only modification is allowed."
|
|
|
|
AUGMENTS { dot1adMIPepEntry }
|
|
::= { fsMIPbPepExtTable 1 }
|
|
|
|
FsMIPbPepExtEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbPepExtCosPreservation EnabledStatus
|
|
}
|
|
|
|
fsMIPbPepExtCosPreservation OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable or disable COS preservation for a
|
|
service provided by this PEP."
|
|
|
|
DEFVAL { disabled }
|
|
::= { fsMIPbPepExtEntry 1 }
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- Customer vlan statistics table
|
|
-- ----------------------------------------------------------------
|
|
|
|
|
|
fsMIPbPortCVlanCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIPbPortCVlanCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the table containing the statistics
|
|
information for a specific Customer VLAN and CEP port combination.
|
|
It contains number of Frames received and bytes received for
|
|
a customer VLAN + CEP port."
|
|
::= { fsMIPbConfig 18 }
|
|
|
|
fsMIPbPortCVlanCounterEntry OBJECT-TYPE
|
|
SYNTAX FsMIPbPortCVlanCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies each entry containing the customer VLAN
|
|
statistics for a port."
|
|
INDEX { fsMIPbPortCVlanContextId ,fsMIPbPortCVlanPort,fsMIPbPortCVlanIndex }
|
|
::= { fsMIPbPortCVlanCounterTable 1 }
|
|
FsMIPbPortCVlanCounterEntry ::=
|
|
SEQUENCE {
|
|
fsMIPbPortCVlanContextId Integer32,
|
|
fsMIPbPortCVlanPort Integer32,
|
|
fsMIPbPortCVlanIndex Unsigned32,
|
|
fsMIPbPortCVlanCounterRxUcast Counter32,
|
|
fsMIPbPortCVlanCounterRxFrames Counter32,
|
|
fsMIPbPortCVlanCounterRxBytes Counter32,
|
|
fsMIPbPortCVlanCounterStatus EnabledStatus,
|
|
fsMIPbPortCVlanClearCounter TruthValue
|
|
}
|
|
|
|
|
|
fsMIPbPortCVlanContextId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the virtual context in the system."
|
|
::= { fsMIPbPortCVlanCounterEntry 1 }
|
|
|
|
|
|
fsMIPbPortCVlanPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interface index in the system. "
|
|
::= { fsMIPbPortCVlanCounterEntry 2 }
|
|
|
|
fsMIPbPortCVlanIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Customer VLAN ID for which statistics
|
|
collection information is available."
|
|
::= { fsMIPbPortCVlanCounterEntry 3 }
|
|
|
|
|
|
fsMIPbPortCVlanCounterRxUcast OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Number of unicast packets received for
|
|
each entry."
|
|
::= { fsMIPbPortCVlanCounterEntry 4 }
|
|
|
|
fsMIPbPortCVlanCounterRxFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Number of frames(all types of packets)
|
|
received for each entry."
|
|
::= { fsMIPbPortCVlanCounterEntry 5 }
|
|
|
|
|
|
fsMIPbPortCVlanCounterRxBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Number of bytes received for each entry."
|
|
::= { fsMIPbPortCVlanCounterEntry 6 }
|
|
|
|
|
|
fsMIPbPortCVlanCounterStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a Truth value indicating the statistics collection
|
|
is enabled/disabled for this customer vlan.
|
|
When statistics collection is set to disabled, stops collecting
|
|
statistics on a specific entry in this table.
|
|
When statistics collection is set to enabled, starts collecting
|
|
statistics on a specific entry in this table. "
|
|
DEFVAL { disabled }
|
|
::= {fsMIPbPortCVlanCounterEntry 7 }
|
|
|
|
fsMIPbPortCVlanClearCounter OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to reset all the counter variables to initialization
|
|
value (zero)."
|
|
DEFVAL {false}
|
|
::= { fsMIPbPortCVlanCounterEntry 8 }
|
|
|
|
|
|
END
|