-- Copyright (C) 2016 Aricent. All Rights Reserved -- $Id: fsmpb.mib,v 1.17 2016/02/18 09:47:31 siva Exp $ ARICENT-MIPROVIDERBRIDGE-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE,MODULE-IDENTITY, Integer32, Unsigned32, Counter32, IpAddress, enterprises FROM SNMPv2-SMI RowStatus, MacAddress, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC VlanId, dot1qVlanIndex FROM Q-BRIDGE-MIB dot1adMIPepEntry FROM ARICENT-MIDOT1AD-MIB EnabledStatus FROM P-BRIDGE-MIB; futureMIProviderBridgeMIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION "||||||" REVISION "201209050000Z" DESCRIPTION "||||||" ::= { enterprises futuresoftware(2076) 127} TunnelStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "To specify how to handle the L2 protocol packets received on a particular port. When the option is set to 'peer', the L2 protocol packets received on a particular port will be processed in the Bridge. When the option is set to 'tunnel', the L2 protocol packets received on a particular port will be transparently transmitted in the provider network and will not be processed in the Provider Bridges/Provider Edge Bridges. When the option is set to 'discard', the L2 protocol packets received over a particular port will not be processed and discarded." SYNTAX INTEGER { peer(1), tunnel(2), discard(3) } --Proprietary MIB implementation for the Provider Bridging functionality fsMIPbSystem OBJECT IDENTIFIER ::= { futureMIProviderBridgeMIB 1 } fsMIPbConfig OBJECT IDENTIFIER ::= { futureMIProviderBridgeMIB 2 } fsMIPbContextInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbContextInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the List of Provider Bridge related objects that can be configured per Virtual Context in the system." ::= { fsMIPbSystem 1 } fsMIPbContextInfoEntry OBJECT-TYPE SYNTAX FsMIPbContextInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Virtual Context based Provider Bridge objects." INDEX { fsMIPbContextId } ::= { fsMIPbContextInfoTable 1 } FsMIPbContextInfoEntry ::= SEQUENCE { fsMIPbContextId Integer32, fsMIPbMulticastMacLimit Unsigned32, fsMIPbTunnelStpAddress MacAddress, fsMIPbTunnelLacpAddress MacAddress, fsMIPbTunnelDot1xAddress MacAddress, fsMIPbTunnelGvrpAddress MacAddress, fsMIPbTunnelGmrpAddress MacAddress } fsMIPbContextId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a Virtual Context." ::= { fsMIPbContextInfoEntry 1 } fsMIPbMulticastMacLimit OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies MAC table size of the device. The size SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry.The upper limit value that can be SET for this object is limited by the underlying hardware. While on initialisation this object hold the maximum size of the Multicast MAC table of the device." ::= { fsMIPbContextInfoEntry 2 } fsMIPbTunnelStpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used for Customer STP BPDUs tunneling inside Provider Network. When tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer BPDUs received on a port where STP tunneling is enabled and the outgoing port is a proprietary PNP. Inside Provider Network, the BPDUs received with this MAC address will be treated as data packets and not processed. When the BPDU is sent out of the Provider Network, this MAC address will be replaced with the reserved address defined for Customer STP BPDUs. This configuration is allowed only for Provider Core or Edge Bridges." ::= { fsMIPbContextInfoEntry 3 } fsMIPbTunnelLacpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used for LACP packets tunneling inside Provider Network. When tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer LACP packets received over this port. Inside Provider Network, LACP packets received with this MAC address will be treated as data packets and not processed. When the tunneled LACP packets are sent out of the Provider Network, this MAC address will be replaced with the reserved address defined for LACP packets. This configuration is allowed only for Provider Core or Edge Bridges." ::= { fsMIPbContextInfoEntry 4 } fsMIPbTunnelDot1xAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used for Dot1x packets tunneling inside Provider Network. When tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer Dot1x packets received over this port. Inside Provider Network, Dot1x packets received with this MAC address will be treated as data packets and not processed. When the tunneled Dot1x packets are sent out of the Provider Network, this MAC address will be replaced with the reserved address defined for Dot1x packets. This configuration is allowed only for Provider Core or Edge Bridges." ::= { fsMIPbContextInfoEntry 5 } fsMIPbTunnelGvrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used for GVRP PDUs tunneling inside Provider Network. When tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer GVRP PDUs received on a port where GVRP tunneling is enable and the outgoing port is a proprietary PNP. Inside Provider Network, GVRP PDUs received with this MAC address will be treated as data packets and not processed. When the tunneled GVRP PDUs are sent out of the Provider Network, this MAC address will be replaced with the reserved address defined for GVRP PDUs. This configuration is allowed only for Provider Core or Edge Bridges." ::= { fsMIPbContextInfoEntry 6 } fsMIPbTunnelGmrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used for GMRP PDUs tunneling inside Provider Network. When tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer GMRP PDUs received over this port. Inside Provider Network, GMRP PDUs received with this MAC address will be treated as data packets and not processed. When the tunneled GMRP PDUs are sent out of the Provider Network, this MAC address will be replaced with the reserved address defined for GMRP PDUs. This configuration is allowed only for Provider Core or Edge Bridges." ::= { fsMIPbContextInfoEntry 7 } -- ------------------------------------------------------------- -- The Provider Bridge Port Type Configuration Table -- ------------------------------------------------------------- fsMIPbPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a table containing provider bridge related configurations for the externally accessible ports. All the objects in this table are applicable only when the Bridge Mode is set as ProviderBridge or ProviderCoreBridge or ProviderEdgeBridge." ::= { fsMIPbConfig 1 } fsMIPbPortInfoEntry OBJECT-TYPE SYNTAX FsMIPbPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies each entry in this table representing the Provider Bridge related port configurations. This table is indexed by ifIndex." INDEX { fsMIPbPort } ::= { fsMIPbPortInfoTable 1 } FsMIPbPortInfoEntry ::= SEQUENCE { fsMIPbPort Integer32, fsMIPbPortSVlanClassificationMethod INTEGER, fsMIPbPortSVlanIngressEtherType Integer32, fsMIPbPortSVlanEgressEtherType Integer32, fsMIPbPortSVlanEtherTypeSwapStatus EnabledStatus, fsMIPbPortSVlanTranslationStatus EnabledStatus, fsMIPbPortUnicastMacLearning EnabledStatus, fsMIPbPortUnicastMacLimit Unsigned32, fsMIPbPortBundleStatus EnabledStatus, fsMIPbPortMultiplexStatus EnabledStatus } fsMIPbPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system." ::= { fsMIPbPortInfoEntry 1 } fsMIPbPortSVlanClassificationMethod OBJECT-TYPE SYNTAX INTEGER { sourceMac (1), destinationMac (2), cvlanSrcMac (3), cvlanDstMac (4), dscp (5), cvlanDscp (6), sourceIp (7), destinationIp (8), srcIpDstIp (9), cvlanDstIp (10), cvlan (11), pvid (12) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the type of SVLAN classification that has to be used for a given type of port. providerNetworkPort / customerNetworkPort - Port's 'pvid' will be the SVLAN classification for the untagged packets received over this interface. customerEdgePort - The SVLAN classification mechanism is always based on 'cvlan' (i.e CVidRegistrationTable ).No other SVLAN classification mechanism is allowed for this port type. propCustomerNetworkPort / propCustomerEdgePort - 'pvid' will be default SVLAN classification mechanism for this port. But the user is free to configure any other SVLAN classification mechanism except the CVidRegistrationTable (ie cvlan mechanism) For proprietary CEP and proprietary CNP ports,the SVLAN classification is based on one of the configured SVLAN classification methods mentioned here. If it is not configured, by default the port's 'PVID' is considered as the SVLAN for untagged packets." ::= { fsMIPbPortInfoEntry 2 } fsMIPbPortSVlanIngressEtherType OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the S-VLAN tag ether type used for the packets received on this port.Packets received on a port are considered tagged, when the packet ethertype matches with the port ether type configured. Otherwise, they will be considered untagged. By default, on all the ports, 0x88a8 will be configured as the ether type. On Proprietary Provider Network Ports 0x8100 will be configured as the ingress ethertype. This object is deprecated. The new MIB object fsMIDot1qFutureVlanPortIngressEtherType indicates the Ingress Ethertype for a port." DEFVAL { 34984 } ::= { fsMIPbPortInfoEntry 3 } fsMIPbPortSVlanEgressEtherType OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the ether type of the S-VLAN tag that has to be applied for all the outgoing packets on this port. If a valid value is in this object, all the packets which are outgoing on this port will contain the ether type as configured in this object. By Default 0x88a8 will be used for packets transmitted with S-VLAN on the ports. On Proprietary Provider Network Ports and Customer Edge Ports, 0x8100 will be used as the ether type for the outgoing packets. This object is deprecated. The new MIB object fsMIDot1qFutureVlanPortEgressEtherType indicates the Egress Ethertype for a port." DEFVAL { 34984 } ::= { fsMIPbPortInfoEntry 4} fsMIPbPortSVlanEtherTypeSwapStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether the Ether Type Swapping can be applied on the S-VLAN tagged packets over this port. The Ether type swapping will only be applied on S-VLAN tag of a packet. This configuration is applicable for all values of Port Type other than customer edge ports." DEFVAL { disabled } ::= { fsMIPbPortInfoEntry 5 } fsMIPbPortSVlanTranslationStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether the VID Translation table can be enabled on the incoming/outgoing packets on a particular port. The Service Vlan swapping is applicable only for the externally accessible network ports (i.e.) Provider Network Port ,Customer Network port and proprietary Customer Network Port. The Service Vlan Translation status can be enabled or disabled on per port basis. By default, it is enabled on Provider Network Port and Customer Network Port(S-Tagged) and disabled on the other applicable port-types." ::= { fsMIPbPortInfoEntry 6 } fsMIPbPortUnicastMacLearning OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies a Truth value indicating the unicast MAC learning enabled/disabled status for this port. When Unicast Mac Learning is disabled, No Entry will be learned from the point of configuration on this port. When Mac Learning is enabled, Entries will be learned on this port." DEFVAL { enabled } ::= { fsMIPbPortInfoEntry 7 } fsMIPbPortUnicastMacLimit OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Limiting value on the number of distinct unicast destination MAC addresses that can be dynamically learnt over this interface. The lower limit and upper limit value that can be SET for this object is determined by the underlying hardware. This Limit is applicable for only dynamically learned entries and NOT for static unicast entries." ::= { fsMIPbPortInfoEntry 8 } fsMIPbPortBundleStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the a truth value indicating that Bundling enabled/disabled on port, this Object can be enabled/disabled only for CEP. For other ports setting and getting is not meaningful." DEFVAL { enabled } ::= { fsMIPbPortInfoEntry 9 } fsMIPbPortMultiplexStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a Truth value indicating that Bundling enabled/disabled on port, this Object can be enabled/disabled only for CEP. For other ports setting and getting is not meaningful." DEFVAL { enabled } ::= { fsMIPbPortInfoEntry 10 } -- ------------------------------------------------------------- -- The S-VLAN Port , SourceMAC based Configuration Table -- ------------------------------------------------------------- fsMIPbSrcMacSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbSrcMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a table containing per port, per SourceMAC based Service VLAN classification information in the device. Entries can be into this table only when the bridge is configured as a Provider Bridge and the Port Type for this port is SET as Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { fsMIPbConfig 2 } fsMIPbSrcMacSVlanEntry OBJECT-TYPE SYNTAX FsMIPbSrcMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Information controlling Service VLAN classification at this specified port for an ingress frame with the specified Source MAC address in the ethernet header of the frame." INDEX { fsMIPbPort, fsMIPbSrcMacAddress } ::= { fsMIPbSrcMacSVlanTable 1 } FsMIPbSrcMacSVlanEntry ::= SEQUENCE { fsMIPbSrcMacAddress MacAddress, fsMIPbSrcMacSVlan VlanId, fsMIPbSrcMacRowStatus RowStatus } fsMIPbSrcMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Source MAC address present in the ethernet header of the frame received on this port for which Service VLAN is assigned based on this entry." ::= { fsMIPbSrcMacSVlanEntry 1 } fsMIPbSrcMacSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Service VLAN ID assigned to frames received on this port when the Source MAC address in the ethernet header of the frame is same as specified in this entry." ::= { fsMIPbSrcMacSVlanEntry 2 } fsMIPbSrcMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'." ::= { fsMIPbSrcMacSVlanEntry 3 } -- ------------------------------------------------------------- -- The S-VLAN Port , DestinationMAC based Configuration Table -- ------------------------------------------------------------- fsMIPbDstMacSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbDstMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a table containing per port, per Destination MAC based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge. An entry in this table is possible only when the 'Port Type' for this port is SET as Proprietary Customer Network Port or Proprietary Customer Edge Port." ::= { fsMIPbConfig 3 } fsMIPbDstMacSVlanEntry OBJECT-TYPE SYNTAX FsMIPbDstMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Information controlling Service VLAN classification at this specified port for an ingress frame with the specified Destination MAC address in the ethernet header of the frame." INDEX { fsMIPbPort, fsMIPbDstMacAddress } ::= { fsMIPbDstMacSVlanTable 1 } FsMIPbDstMacSVlanEntry ::= SEQUENCE { fsMIPbDstMacAddress MacAddress, fsMIPbDstMacSVlan VlanId, fsMIPbDstMacRowStatus RowStatus } fsMIPbDstMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Destination MAC address present in the ethernet header of the frame received on this port for which Service VLAN is assigned based on this entry." ::= { fsMIPbDstMacSVlanEntry 1 } fsMIPbDstMacSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Service VLAN ID assigned to frames received on this port when the Destination MAC address in the ethernet header of the frame is same as specified in this entry." ::= { fsMIPbDstMacSVlanEntry 2 } fsMIPbDstMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { fsMIPbDstMacSVlanEntry 3 } -- ------------------------------------------------------------- -- The S-VLAN Port , C-VLAN, Source MAC based Configuration Table -- ------------------------------------------------------------- fsMIPbCVlanSrcMacSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbCVlanSrcMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the a table containing per Port, per Customer VLAN ID, per Source MAC based S-VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge. An entry in this table is possible only when the 'PortType' for this port is SET as Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { fsMIPbConfig 4 } fsMIPbCVlanSrcMacSVlanEntry OBJECT-TYPE SYNTAX FsMIPbCVlanSrcMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Information controlling Service VLAN classification at this specified port for an ingress frame with the classified Customer VLAN ID and with the specified Source MAC address in the ethernet header of the frame. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." INDEX { fsMIPbPort, fsMIPbCVlanSrcMacCVlan, fsMIPbCVlanSrcMacAddr } ::= { fsMIPbCVlanSrcMacSVlanTable 1 } FsMIPbCVlanSrcMacSVlanEntry ::= SEQUENCE { fsMIPbCVlanSrcMacCVlan VlanId, fsMIPbCVlanSrcMacAddr MacAddress, fsMIPbCVlanSrcMacSVlan VlanId, fsMIPbCVlanSrcMacRowStatus RowStatus } fsMIPbCVlanSrcMacCVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port OR the Customer VLAN ID for which the ingress frame is classified to this specified port." ::= { fsMIPbCVlanSrcMacSVlanEntry 1 } fsMIPbCVlanSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Source MAC address in the ethernet header of the frame received on this port." ::= { fsMIPbCVlanSrcMacSVlanEntry 2 } fsMIPbCVlanSrcMacSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Service VLAN assigned to frames received on this port, When the Classified Customer VLAN ID is same as specified in this entry and When the Source MAC address in the ethernet header of the frame is same as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." ::= { fsMIPbCVlanSrcMacSVlanEntry 3 } fsMIPbCVlanSrcMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { fsMIPbCVlanSrcMacSVlanEntry 4 } -- ------------------------------------------------------------- -- The S-VLAN Port , C-VLAN, Destination MAC based Configuration Table -- ------------------------------------------------------------- fsMIPbCVlanDstMacSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbCVlanDstMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a table containing per Port, per Customer VLAN ID, per Destination MAC based S-VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge. An entry in this table is possible only when the 'Port Type' for this port is SET as Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { fsMIPbConfig 5 } fsMIPbCVlanDstMacSVlanEntry OBJECT-TYPE SYNTAX FsMIPbCVlanDstMacSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Information controlling Service VLAN classification at this specified port for an ingress frame with the classified Customer VLAN ID and with the specified Destination MAC address in the ethernet header of the frame. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." INDEX { fsMIPbPort, fsMIPbCVlanDstMacCVlan, fsMIPbCVlanDstMacAddr } ::= { fsMIPbCVlanDstMacSVlanTable 1 } FsMIPbCVlanDstMacSVlanEntry ::= SEQUENCE { fsMIPbCVlanDstMacCVlan VlanId, fsMIPbCVlanDstMacAddr MacAddress, fsMIPbCVlanDstMacSVlan VlanId, fsMIPbCVlanDstMacRowStatus RowStatus } fsMIPbCVlanDstMacCVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port or the Customer VLAN ID for which the ingress frame is classified for at this specified port." ::= { fsMIPbCVlanDstMacSVlanEntry 1 } fsMIPbCVlanDstMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Destination MAC address in the ethernet header of the frame received on this port." ::= { fsMIPbCVlanDstMacSVlanEntry 2 } fsMIPbCVlanDstMacSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Service VLAN assigned to frames received on this port when the Classified Customer VLAN ID and when the Destination MAC address in the ethernet header of the frame is same as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." ::= { fsMIPbCVlanDstMacSVlanEntry 3 } fsMIPbCVlanDstMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { fsMIPbCVlanDstMacSVlanEntry 4 } -- ------------------------------------------------------------- -- The S-VLAN Port , DSCP based Configuration Table -- ------------------------------------------------------------- fsMIPbDscpSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbDscpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a table containing per port, per DiffServ Code Point (DSCP) value based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge and the 'PortType' for this port is SET as Proprietary Customer Network Port or Proprietary Customer Edge Port." ::= { fsMIPbConfig 6 } fsMIPbDscpSVlanEntry OBJECT-TYPE SYNTAX FsMIPbDscpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Information controlling Service VLAN classification at this specified port for an ingress IP frame with the DSCP value as specified in this entry." INDEX { fsMIPbPort, fsMIPbDscp } ::= { fsMIPbDscpSVlanTable 1 } FsMIPbDscpSVlanEntry ::= SEQUENCE { fsMIPbDscp Integer32, fsMIPbDscpSVlan VlanId, fsMIPbDscpRowStatus RowStatus } fsMIPbDscp OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the DSCP value in the IP header of the frame received on this port for which Service VLAN is assigned based on this entry." ::= { fsMIPbDscpSVlanEntry 1 } fsMIPbDscpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Service VLAN ID assigned to IP frames received on this port when the DSCP value in the IP header of the frame is same as specified in this entry." ::= { fsMIPbDscpSVlanEntry 2 } fsMIPbDscpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { fsMIPbDscpSVlanEntry 3 } -- ------------------------------------------------------------- -- The S-VLAN Port ,C-VLAN and DSCP based Configuration Table -- ------------------------------------------------------------- fsMIPbCVlanDscpSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbCVlanDscpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a table containing per port, per Customer VLAN ID, per DiffServ Code Point (DSCP) value based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge and the 'PortType' for this port is SET as Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { fsMIPbConfig 7 } fsMIPbCVlanDscpSVlanEntry OBJECT-TYPE SYNTAX FsMIPbCVlanDscpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Information controlling Service VLAN classification at this specified port for an ingress IP frame with the classified Customer VLAN ID as specified in this entry and the DSCP value in the frame as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." INDEX { fsMIPbPort, fsMIPbCVlanDscpCVlan, fsMIPbCVlanDscp } ::= { fsMIPbCVlanDscpSVlanTable 1 } FsMIPbCVlanDscpSVlanEntry ::= SEQUENCE { fsMIPbCVlanDscpCVlan VlanId, fsMIPbCVlanDscp Integer32, fsMIPbCVlanDscpSVlan VlanId, fsMIPbCVlanDscpRowStatus RowStatus } fsMIPbCVlanDscpCVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port or the Customer VLAN ID for which the ingress frame is classified for at this specified port." ::= { fsMIPbCVlanDscpSVlanEntry 1 } fsMIPbCVlanDscp OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the DSCP value in the IP header of the frame received on this port." ::= { fsMIPbCVlanDscpSVlanEntry 2 } fsMIPbCVlanDscpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Service VLAN ID assigned to frames received on this port, when the classified Customer VLAN ID is the same as specified in this entry and when the DSCP value in the IP header of the frame is same as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." ::= { fsMIPbCVlanDscpSVlanEntry 3 } fsMIPbCVlanDscpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { fsMIPbCVlanDscpSVlanEntry 4 } -- ------------------------------------------------------------- -- The S-VLAN Port ,Source IP Address based Configuration Table -- ------------------------------------------------------------- fsMIPbSrcIpAddrSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbSrcIpAddrSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a table containing per port, per Source IP Address, based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge and the 'PortType' for this port is SET as Proprietary Customer Network Port or Proprietary Customer Edge Port." ::= { fsMIPbConfig 8 } fsMIPbSrcIpAddrSVlanEntry OBJECT-TYPE SYNTAX FsMIPbSrcIpAddrSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Information controlling Service VLAN classification at this specified port for an ingress IP frame with the Source IP Address in the IP header of the frame as specified in this entry." INDEX { fsMIPbPort, fsMIPbSrcIpAddr } ::= { fsMIPbSrcIpAddrSVlanTable 1 } FsMIPbSrcIpAddrSVlanEntry ::= SEQUENCE { fsMIPbSrcIpAddr IpAddress, fsMIPbSrcIpSVlan VlanId, fsMIPbSrcIpRowStatus RowStatus } fsMIPbSrcIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Source IP Address in the IP header of an ingress IP frame at this specified port." ::= { fsMIPbSrcIpAddrSVlanEntry 1 } fsMIPbSrcIpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The Service VLAN ID assigned to frames ingress at this port when the Source IP address in the IP header of the frame is same as specified in this entry." ::= { fsMIPbSrcIpAddrSVlanEntry 2 } fsMIPbSrcIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { fsMIPbSrcIpAddrSVlanEntry 3 } -- ------------------------------------------------------------- -- The S-VLAN Port ,Destination IP Address based Configuration Table -- ------------------------------------------------------------- fsMIPbDstIpAddrSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbDstIpAddrSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a table containing per port, per Destination IP Address, based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge and the 'PortType' for this port is SET as Proprietary Customer Network Port or Proprietary Customer Edge Port." ::= { fsMIPbConfig 9 } fsMIPbDstIpAddrSVlanEntry OBJECT-TYPE SYNTAX FsMIPbDstIpAddrSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Information controlling Service VLAN classification at this specified port for an ingress IP frame with the Destination IP Address in the IP header of the frame as specified in this entry." INDEX { fsMIPbPort, fsMIPbDstIpAddr } ::= { fsMIPbDstIpAddrSVlanTable 1 } FsMIPbDstIpAddrSVlanEntry ::= SEQUENCE { fsMIPbDstIpAddr IpAddress, fsMIPbDstIpSVlan VlanId, fsMIPbDstIpRowStatus RowStatus } fsMIPbDstIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Destination IP Address in the IP header of an ingress IP frame at this specified port." ::= { fsMIPbDstIpAddrSVlanEntry 1 } fsMIPbDstIpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Service VLAN ID assigned to frames ingress at this port when the Destination IP address in the IP header of the frame is same as specified in this entry." ::= { fsMIPbDstIpAddrSVlanEntry 2 } fsMIPbDstIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { fsMIPbDstIpAddrSVlanEntry 3 } -- ------------------------------------------------------------- -- The S-VLAN Port ,SourceIP Address, DestinationIP Address based -- Configuration Table -- ------------------------------------------------------------- fsMIPbSrcDstIpSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbSrcDstIpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a table containing per port, per Source IP Address, per Destination IP Address based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as a Provider Bridge and the'PortType' for this port is SET as Proprietary Customer Network Port or Proprietary Customer Edge Port." ::= { fsMIPbConfig 10} fsMIPbSrcDstIpSVlanEntry OBJECT-TYPE SYNTAX FsMIPbSrcDstIpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies Information controlling Service VLAN classification at this specified port for an ingress IP frame with the Source and Destination IP Address in the IP header of the frame as specified in this entry." INDEX { fsMIPbPort, fsMIPbSrcDstSrcIpAddr, fsMIPbSrcDstDstIpAddr } ::= { fsMIPbSrcDstIpSVlanTable 1 } FsMIPbSrcDstIpSVlanEntry ::= SEQUENCE { fsMIPbSrcDstSrcIpAddr IpAddress, fsMIPbSrcDstDstIpAddr IpAddress, fsMIPbSrcDstIpSVlan VlanId, fsMIPbSrcDstIpRowStatus RowStatus } fsMIPbSrcDstSrcIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Source IP Address in the IP header of an ingress IP frame at this specified port." ::= { fsMIPbSrcDstIpSVlanEntry 1 } fsMIPbSrcDstDstIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Destination IP Address in the IP header of an ingress IP frame at this specified port." ::= { fsMIPbSrcDstIpSVlanEntry 2 } fsMIPbSrcDstIpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Service VLAN ID assigned to frames ingress at this port when the Source and Destination IP address in the IP header of the frame are same as specified in this entry." ::= { fsMIPbSrcDstIpSVlanEntry 3 } fsMIPbSrcDstIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { fsMIPbSrcDstIpSVlanEntry 4 } -- ------------------------------------------------------------- -- The S-VLAN Port ,Customer VLAN ID, Destination IP Address based -- Configuration Table -- ------------------------------------------------------------- fsMIPbCVlanDstIpSVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbCVlanDstIpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the A table containing per port, per Customer VLAN ID, per Destination IP Address, based Service VLAN classification information in the device. Entries can be configured into this table only when the bridge is configured as Provider Bridge or Provider Edge Bridge and the Port Type for this port is SET as Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { fsMIPbConfig 11 } fsMIPbCVlanDstIpSVlanEntry OBJECT-TYPE SYNTAX FsMIPbCVlanDstIpSVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Information controlling Service VLAN classification at this specified port for an ingress IP frame with the classified Customer VLAN ID as specified in this entry and the Destination IP Address in the IP header of the frame as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." INDEX { fsMIPbPort, fsMIPbCVlanDstIpCVlan, fsMIPbCVlanDstIp } ::= { fsMIPbCVlanDstIpSVlanTable 1 } FsMIPbCVlanDstIpSVlanEntry ::= SEQUENCE { fsMIPbCVlanDstIpCVlan VlanId, fsMIPbCVlanDstIp IpAddress, fsMIPbCVlanDstIpSVlan VlanId, fsMIPbCVlanDstIpRowStatus RowStatus } fsMIPbCVlanDstIpCVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port or the Customer VLAN ID for which the ingress frame is classified for at this specified port." ::= { fsMIPbCVlanDstIpSVlanEntry 1 } fsMIPbCVlanDstIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Destination IP Address in the IP header of an ingress IP frame at this specified port." ::= { fsMIPbCVlanDstIpSVlanEntry 2 } fsMIPbCVlanDstIpSVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Service VLAN ID assigned to frames ingress at this port when the classified Customer VLAN ID is same as specified in this entry and the Destination IP address in the IP header of the frame is same as specified in this entry. Classification of Customer VLAN ID may be from the Customer VLAN tag in the received frame OR based on Port CVLAN table." ::= { fsMIPbCVlanDstIpSVlanEntry 3 } fsMIPbCVlanDstIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { fsMIPbCVlanDstIpSVlanEntry 4 } -- ------------------------------------------------------------- -- The C-VLAN Port based Configuration Table -- ------------------------------------------------------------- fsMIPbPortBasedCVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbPortBasedCVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a table containing Customer Edge Port / Proprietary Customer Edge Port / Proprietary Customer Network Port mapping to Customer VLAN on a providerBridge. This table is used for a classifying a untagged frame received on above mentioned customer ports." ::= { fsMIPbConfig 12 } fsMIPbPortBasedCVlanEntry OBJECT-TYPE SYNTAX FsMIPbPortBasedCVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an Entry in this table which will be created whenever a port is configured as Customer Edge Port / Proprietary Customer Edge Port / Proprietary Customer Network Port. This Entry will be used on the ingress frame on the specified ports based on enabled status for classifying the frame to CVLAN. Also the Entry will be deleted in this table, when the port type is modified anything other than the specified one." INDEX { fsMIPbPort } ::= { fsMIPbPortBasedCVlanTable 1 } FsMIPbPortBasedCVlanEntry ::= SEQUENCE { fsMIPbPortCVlan VlanId, fsMIPbPortCVlanClassifyStatus EnabledStatus, fsMIPbPortEgressUntaggedStatus INTEGER } fsMIPbPortCVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Customer VLAN ID assigned to untagged frames ingress at this specified Customer Edge Port / Proprietary Customer Edge Port / Proprietary Customer Network Port." ::= { fsMIPbPortBasedCVlanEntry 1 } fsMIPbPortCVlanClassifyStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the C-VLAN classification status on a port. This Object can be enabled/disabled only for PropCEP/PropCNP. For CEP, this object cannot be disabled." DEFVAL { enabled } ::= { fsMIPbPortBasedCVlanEntry 2 } fsMIPbPortEgressUntaggedStatus OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether to allow or drop untagged packets from being transmitted on CEP port. When it is set to allow, untagged packets will be allowed to be transmitted on CEP port. By default, the object is set to deny which will drop untagged packets from being transmitted on CEP port." DEFVAL { deny } ::= { fsMIPbPortBasedCVlanEntry 3 } -- ------------------------------------------------------------- -- EtherType SwappingTable -- ------------------------------------------------------------- fsMIPbEtherTypeSwapTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbEtherTypeSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a Table containing the Translation information of the ethertype for a Service VLAN in a given packet. This Table shall be used only at ingress and NOT at egress of the Customer Network Port / Proprietary Customer Network Port / Provider Network Port. This translation table is applicable for only Service VLAN and not for customer VLAN's." ::= { fsMIPbConfig 13 } fsMIPbEtherTypeSwapEntry OBJECT-TYPE SYNTAX FsMIPbEtherTypeSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the entry containing the Local and Relay Ether type for a given packet on a particular port. This entry shall be applicable on all types of ports if and only if fsMIPbPortSVlanEtherTypeSwapStatus is Enabled on that Port." INDEX { fsMIPbPort, fsMIPbLocalEtherType} ::= { fsMIPbEtherTypeSwapTable 1 } FsMIPbEtherTypeSwapEntry ::= SEQUENCE { fsMIPbLocalEtherType Integer32, fsMIPbRelayEtherType Integer32, fsMIPbEtherTypeSwapRowStatus RowStatus } fsMIPbLocalEtherType OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Ether type present in the service vlan tag of the ingress packet at the given port." ::= { fsMIPbEtherTypeSwapEntry 1 } fsMIPbRelayEtherType OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Relay Ether type mapped for the ether type present in the local service vlan tag of the ingress packet at the given port." ::= { fsMIPbEtherTypeSwapEntry 2 } fsMIPbEtherTypeSwapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'." ::= { fsMIPbEtherTypeSwapEntry 3 } -- ---------------------------------------------------------------- -- S-VLAN configuration table -- ---------------------------------------------------------------- fsMIPbSVlanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbSVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the table to configure the service type supported by an S-VLAN. Based on the service type configured for the S-VLAN, the oper point-to-point state of PEP ports will be determined. The service type SET for S-VLAN is applicable only for the S-VLAN in specified Virtual Context identified by the Virtual Context identifier in this entry." ::= { fsMIPbConfig 14 } fsMIPbSVlanConfigEntry OBJECT-TYPE SYNTAX FsMIPbSVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the service type can be configured for an S-VLAN only when the VLAN is already created in the system." INDEX { fsMIPbContextId, dot1qVlanIndex } ::= { fsMIPbSVlanConfigTable 1 } FsMIPbSVlanConfigEntry ::= SEQUENCE { fsMIPbSVlanConfigServiceType INTEGER } fsMIPbSVlanConfigServiceType OBJECT-TYPE SYNTAX INTEGER { eLine (1), eLan (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the service type supported by the S-VLAN in the Virtual Context. When it is set to 'eLine', the S-VLAN connects not more than two customer interfaces. If the service type for a vlan is 'eLine', then learning member ports through GVRP will not be allowed. Hence the oper point-to-point state of the PEPs connecting the S-VLAN can be set to True for specified Virtual Context. When it is set to 'eLan', the S-VLAN connects more than two customer interfaces.So, the oper point-to-point state of the PEPs connecting the S-VLAN will be set to False for specified Virtual Context. In case of IVL, When the service type is set to E-Line for a VLAN, the MAC learning status will be set to 'disabled'. When it is set to E-LAN, MAC learning status will be enabled for that VLAN." ::= { fsMIPbSVlanConfigEntry 1 } -- ---------------------------------------------------------------- -- Tunnel protocol configuration table -- ---------------------------------------------------------------- fsMIPbTunnelProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbTunnelProtocolEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object specifies the table containing information about the handling (Tunnel/Peer/ Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) inside service provider network." ::= { fsMIPbConfig 15 } fsMIPbTunnelProtocolEntry OBJECT-TYPE SYNTAX FsMIPbTunnelProtocolEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object specifies the entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port. This table is supported only for Provider Core or Provider Edge Bridges." INDEX { fsMIPbPort } ::= { fsMIPbTunnelProtocolTable 1 } FsMIPbTunnelProtocolEntry ::= SEQUENCE { fsMIPbTunnelProtocolDot1x TunnelStatus, fsMIPbTunnelProtocolLacp TunnelStatus, fsMIPbTunnelProtocolStp TunnelStatus, fsMIPbTunnelProtocolGvrp TunnelStatus, fsMIPbTunnelProtocolGmrp TunnelStatus, fsMIPbTunnelProtocolIgmp TunnelStatus } fsMIPbTunnelProtocolDot1x OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the object to specify whether to peer/tunnel/discard the Dot1x packets received on this port." ::= { fsMIPbTunnelProtocolEntry 1 } fsMIPbTunnelProtocolLacp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies whether to peer/tunnel/discard the LACP packets received on this port." ::= { fsMIPbTunnelProtocolEntry 2 } fsMIPbTunnelProtocolStp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies whether to peer/tunnel/discard the STP packets received on this port." ::= { fsMIPbTunnelProtocolEntry 3 } fsMIPbTunnelProtocolGvrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies whether to peer/tunnel/discard the GVRP packets received on this port." ::= { fsMIPbTunnelProtocolEntry 4 } fsMIPbTunnelProtocolGmrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies whether to peer/tunnel/discard the GMRP packets received on this port." ::= { fsMIPbTunnelProtocolEntry 5 } fsMIPbTunnelProtocolIgmp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies whether to peer/tunnel/discard the IGMP packets received on this port." ::= { fsMIPbTunnelProtocolEntry 6 } -- ---------------------------------------------------------------- -- Tunnel protocol statistics table -- ---------------------------------------------------------------- fsMIPbTunnelProtocolStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbTunnelProtocolStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object specifies the table containing statistics information about the tunneled Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) received and transmitted over a port." ::= { fsMIPbConfig 16 } fsMIPbTunnelProtocolStatsEntry OBJECT-TYPE SYNTAX FsMIPbTunnelProtocolStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object specifies the Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port. This table is supported only for Provider Core or Provider Edge Bridges." INDEX { fsMIPbPort } ::= { fsMIPbTunnelProtocolStatsTable 1 } FsMIPbTunnelProtocolStatsEntry ::= SEQUENCE { fsMIPbTunnelProtocolDot1xPktsRecvd Counter32, fsMIPbTunnelProtocolDot1xPktsSent Counter32, fsMIPbTunnelProtocolLacpPktsRecvd Counter32, fsMIPbTunnelProtocolLacpPktsSent Counter32, fsMIPbTunnelProtocolStpPDUsRecvd Counter32, fsMIPbTunnelProtocolStpPDUsSent Counter32, fsMIPbTunnelProtocolGvrpPDUsRecvd Counter32, fsMIPbTunnelProtocolGvrpPDUsSent Counter32, fsMIPbTunnelProtocolGmrpPktsRecvd Counter32, fsMIPbTunnelProtocolGmrpPktsSent Counter32, fsMIPbTunnelProtocolIgmpPktsRecvd Counter32, fsMIPbTunnelProtocolIgmpPktsSent Counter32 } fsMIPbTunnelProtocolDot1xPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunneled Dot1x Packets received." ::= { fsMIPbTunnelProtocolStatsEntry 1 } fsMIPbTunnelProtocolDot1xPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunneled Dot1x Packets transmitted." ::= { fsMIPbTunnelProtocolStatsEntry 2 } fsMIPbTunnelProtocolLacpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunneled LACP Packets received." ::= { fsMIPbTunnelProtocolStatsEntry 3 } fsMIPbTunnelProtocolLacpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunneled LACP packets transmitted." ::= { fsMIPbTunnelProtocolStatsEntry 4 } fsMIPbTunnelProtocolStpPDUsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunneled STP PDUs received." ::= { fsMIPbTunnelProtocolStatsEntry 5 } fsMIPbTunnelProtocolStpPDUsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunneled STP PDUs transmitted." ::= { fsMIPbTunnelProtocolStatsEntry 6 } fsMIPbTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunneled GVRP PDUs received." ::= { fsMIPbTunnelProtocolStatsEntry 7 } fsMIPbTunnelProtocolGvrpPDUsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunneled GVRP PDUs transmitted." ::= { fsMIPbTunnelProtocolStatsEntry 8 } fsMIPbTunnelProtocolGmrpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunneled GMRP PDUs packets received." ::= { fsMIPbTunnelProtocolStatsEntry 9 } fsMIPbTunnelProtocolGmrpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunneled GMRP packets transmitted." ::= { fsMIPbTunnelProtocolStatsEntry 10 } fsMIPbTunnelProtocolIgmpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunneled IGMP packets received." ::= { fsMIPbTunnelProtocolStatsEntry 11 } fsMIPbTunnelProtocolIgmpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the number of tunnelled IGMP packets transmitted." ::= { fsMIPbTunnelProtocolStatsEntry 12 } -- ---------------------------------------------------------------- -- Provider Edge Port configuration table -- ---------------------------------------------------------------- fsMIPbPepExtTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbPepExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an extension of dot1adMIPepTable table, and it provides additional configurations to PEPs (like Cos Preservations,..). when a entry in dot1adMIPepTable is created, then an entry will be created in this table." ::= { fsMIPbConfig 17 } fsMIPbPepExtEntry OBJECT-TYPE SYNTAX FsMIPbPepExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the entry containing information like (COS preservation, ..) for the internal PEPs. Creation of an entry in this table is not allowed and only modification is allowed." AUGMENTS { dot1adMIPepEntry } ::= { fsMIPbPepExtTable 1 } FsMIPbPepExtEntry ::= SEQUENCE { fsMIPbPepExtCosPreservation EnabledStatus } fsMIPbPepExtCosPreservation OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable COS preservation for a service provided by this PEP." DEFVAL { disabled } ::= { fsMIPbPepExtEntry 1 } -- ---------------------------------------------------------------- -- Customer vlan statistics table -- ---------------------------------------------------------------- fsMIPbPortCVlanCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIPbPortCVlanCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the table containing the statistics information for a specific Customer VLAN and CEP port combination. It contains number of Frames received and bytes received for a customer VLAN + CEP port." ::= { fsMIPbConfig 18 } fsMIPbPortCVlanCounterEntry OBJECT-TYPE SYNTAX FsMIPbPortCVlanCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies each entry containing the customer VLAN statistics for a port." INDEX { fsMIPbPortCVlanContextId ,fsMIPbPortCVlanPort,fsMIPbPortCVlanIndex } ::= { fsMIPbPortCVlanCounterTable 1 } FsMIPbPortCVlanCounterEntry ::= SEQUENCE { fsMIPbPortCVlanContextId Integer32, fsMIPbPortCVlanPort Integer32, fsMIPbPortCVlanIndex Unsigned32, fsMIPbPortCVlanCounterRxUcast Counter32, fsMIPbPortCVlanCounterRxFrames Counter32, fsMIPbPortCVlanCounterRxBytes Counter32, fsMIPbPortCVlanCounterStatus EnabledStatus, fsMIPbPortCVlanClearCounter TruthValue } fsMIPbPortCVlanContextId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the virtual context in the system." ::= { fsMIPbPortCVlanCounterEntry 1 } fsMIPbPortCVlanPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the interface index in the system. " ::= { fsMIPbPortCVlanCounterEntry 2 } fsMIPbPortCVlanIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Customer VLAN ID for which statistics collection information is available." ::= { fsMIPbPortCVlanCounterEntry 3 } fsMIPbPortCVlanCounterRxUcast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of unicast packets received for each entry." ::= { fsMIPbPortCVlanCounterEntry 4 } fsMIPbPortCVlanCounterRxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of frames(all types of packets) received for each entry." ::= { fsMIPbPortCVlanCounterEntry 5 } fsMIPbPortCVlanCounterRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of bytes received for each entry." ::= { fsMIPbPortCVlanCounterEntry 6 } fsMIPbPortCVlanCounterStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a Truth value indicating the statistics collection is enabled/disabled for this customer vlan. When statistics collection is set to disabled, stops collecting statistics on a specific entry in this table. When statistics collection is set to enabled, starts collecting statistics on a specific entry in this table. " DEFVAL { disabled } ::= {fsMIPbPortCVlanCounterEntry 7 } fsMIPbPortCVlanClearCounter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to reset all the counter variables to initialization value (zero)." DEFVAL {false} ::= { fsMIPbPortCVlanCounterEntry 8 } END