WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/aricent/ARICENT-DHCP-RLY-MI-MIB

462 lines
15 KiB
Plaintext
Raw Permalink Blame History

--******************************************************************************
--Copyright (C) 2012 Aricent Inc . All Rights Reserved
--
--$Id: fsmidhcpRelay.mib,v 1.1 2015/06/17 04:55:23 siva Exp $
--
--Description : This file contains MIB definitions for ISS module.
--
--******************************************************************************
-- AricentISS MIB Definition
-- MIB for 'DHCP Relay MI MIB'
ARICENT-DHCP-RLY-MI-MIB DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32, MODULE-IDENTITY, OBJECT-TYPE, IpAddress,
Counter32, Integer32,enterprises FROM SNMPv2-SMI
RowStatus,DisplayString FROM SNMPv2-TC
ifIndex FROM IF-MIB;
futureMIDhcpRelay MODULE-IDENTITY
LAST-UPDATED "20141028000Z"
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
CONTACT-INFO
"ARICENT COMMUNICATIONS SOFTWARE
3460 Hillview Avenue,
Palo Alto, CA 94304-1388, USA,
Phone : +1-650-391-1088
E-mail:support@aricent.com"
DESCRIPTION
"The enterprise ID 29601 is assigned to Aricent Communication
Holdings Limitied."
REVISION "20141028000Z"
DESCRIPTION
"The Dhcp MI Relay agent MIB "
::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 92 }
-- ----------------------------------------------------------------- --
-- groups in the MIB
-- ----------------------------------------------------------------- --
fsMIDhcpRelay OBJECT IDENTIFIER ::= { futureMIDhcpRelay 1 }
fsMIDhcpRelayTable OBJECT IDENTIFIER ::= { futureMIDhcpRelay 2 }
--SCALAR_TABLE_BEGIN
fsMIDhcpConfigGblTraceLevel OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Global trace level Object which has bit masks for
various levels of tracing "
DEFVAL { 1 }
::= { fsMIDhcpRelay 1 }
--SCALAR_TABLE_END
-- ******************* DHCP RELAY MI Configuration ********************
-- *************Context table for DHCP Relay MI support ***************
fsMIDhcpContextTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDhcpContextEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This context table contains the global parameters of DHCP Relay
that is required to be configured for each context."
::= { fsMIDhcpRelayTable 1 }
fsMIDhcpContextEntry OBJECT-TYPE
SYNTAX FsMIDhcpContextEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Entry for the configuration in a particular VR."
INDEX { fsMIDhcpContextId }
::= { fsMIDhcpContextTable 1 }
FsMIDhcpContextEntry ::= SEQUENCE {
fsMIDhcpContextId Integer32,
fsMIDhcpRelaying INTEGER,
fsMIDhcpRelayServersOnly INTEGER,
fsMIDhcpRelaySecsThreshold INTEGER,
fsMIDhcpRelayHopsThreshold Integer32,
fsMIDhcpRelayRAIOptionControl INTEGER,
fsMIDhcpRelayRAICircuitIDSubOptionControl INTEGER,
fsMIDhcpRelayRAIRemoteIDSubOptionControl INTEGER,
fsMIDhcpRelayRAISubnetMaskSubOptionControl INTEGER,
fsMIDhcpRelayRAIOptionInserted Counter32,
fsMIDhcpRelayRAICircuitIDSubOptionInserted Counter32,
fsMIDhcpRelayRAIRemoteIDSubOptionInserted Counter32,
fsMIDhcpRelayRAISubnetMaskSubOptionInserted Counter32,
fsMIDhcpRelayRAIOptionWronglySet Counter32,
fsMIDhcpRelayRAISpaceConstraint Counter32,
fsMIDhcpConfigTraceLevel Integer32,
fsMIDhcpConfigDhcpCircuitOption BITS,
fsMIDhcpRelayCounterReset INTEGER,
fsMIDhcpRelayContextRowStatus RowStatus
}
fsMIDhcpContextId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value that uniquely identifies the virtual router in which the configuration is done."
::= { fsMIDhcpContextEntry 1 }
fsMIDhcpRelaying OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Only when enabled, the Relay Agent shall become active."
DEFVAL { disable }
::= { fsMIDhcpContextEntry 2 }
fsMIDhcpRelayServersOnly OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, the Relay Agent shall forward the
packets from the client to a specific DHCP server."
DEFVAL { disable }
::= { fsMIDhcpContextEntry 3 }
fsMIDhcpRelaySecsThreshold OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IF the secs field in the DHCP message is greater than the
fsMIDhcpRelaySecsThreshold, Packet get dropped at the Relay Agent"
DEFVAL { 0 }
::= { fsMIDhcpContextEntry 4 }
fsMIDhcpRelayHopsThreshold OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A maximum hop count,a relay agent allow to pass through it.If
the HopCount in the Dhcp Message is greater than the fsMIDhcpRelayHopsThreshold,
Packet get dropped at the Relay Agent "
DEFVAL { 4 }
::= { fsMIDhcpContextEntry 5 }
fsMIDhcpRelayRAIOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Only when enabled, the Relay Agent shall do any processing
related to Relay Agent Information Options - like
inserting the necessary options while relaying a packet
from a client to a server and examining/stripping of
options when relaying a packet from a server to a
client."
DEFVAL { disable }
::= { fsMIDhcpContextEntry 6 }
fsMIDhcpRelayRAICircuitIDSubOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the CircuitID sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-option
while relaying packets from a server to a client."
DEFVAL { disable }
::= { fsMIDhcpContextEntry 7 }
fsMIDhcpRelayRAIRemoteIDSubOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the RemoteID sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-option
while relaying packets from a server to a client."
DEFVAL { disable }
::= { fsMIDhcpContextEntry 8 }
fsMIDhcpRelayRAISubnetMaskSubOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the Subnet Mask sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-option
while relaying packets from a server to a client."
DEFVAL { disable }
::= { fsMIDhcpContextEntry 9 }
fsMIDhcpRelayRAIOptionInserted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets in which the RelayAgent inserted
the RAIOption."
::= { fsMIDhcpContextEntry 10 }
fsMIDhcpRelayRAICircuitIDSubOptionInserted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets in which the RelayAgent inserted
the CircuitID SubOption."
::= { fsMIDhcpContextEntry 11 }
fsMIDhcpRelayRAIRemoteIDSubOptionInserted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets in which the RelayAgent inserted
the RemoteID SubOption."
::= { fsMIDhcpContextEntry 12 }
fsMIDhcpRelayRAISubnetMaskSubOptionInserted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets in which the RelayAgent inserted
the SubnetMask SubOption."
::= { fsMIDhcpContextEntry 13 }
fsMIDhcpRelayRAIOptionWronglySet OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets dropped by the Relay Agent because the giaddr
field is not set but the RAI option exists in the packet."
::= { fsMIDhcpContextEntry 14 }
fsMIDhcpRelayRAISpaceConstraint OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets in which the RAI Option wasnot inserted
by the Relay Agent because if inserted the packetsize shall
exceed the MTU."
::= { fsMIDhcpContextEntry 15 }
fsMIDhcpConfigTraceLevel OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Trace level Object which has bit masks for
various levels of tracing "
DEFVAL { 1 }
::= { fsMIDhcpContextEntry 16 }
fsMIDhcpConfigDhcpCircuitOption OBJECT-TYPE
SYNTAX BITS {
routerindex(0), -- Router Interfce Index
vlanid(1), -- vlanId
recvport(2) -- port or lag port
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object defines the type of information to be present in circuit id
sub-option.And this option can specfied only if
CircuitIDSubOptionControl is enabled.It is possible to set more than
one bit at a time.Currently first three bits are used and remaning bits
are reserved for future purpose.Default value for this option is
routerindex(00000001)."
DEFVAL { 1 }
::= { fsMIDhcpContextEntry 17 }
fsMIDhcpRelayCounterReset OBJECT-TYPE
SYNTAX INTEGER {
set (1),
notset (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to reset the statistics counters.
When set to set(1), statistics counters will be cleared. When set
to notset(2), no action will take place. "
DEFVAL { notset }
::= { fsMIDhcpContextEntry 18 }
fsMIDhcpRelayContextRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of this table"
::= { fsMIDhcpContextEntry 19 }
-- ********************End of Context Table********************************
-- ***********************IPADDRESS_TABLE_BEGIN ***************************
fsMIDhcpRelaySrvAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDhcpRelaySrvAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IP addresses of the DHCP Server
to which the Relay Agent needs to forward the packets from
the client. This object becomes active only when
dhcpRelayServersOnly is enabled."
::= { fsMIDhcpRelayTable 2 }
fsMIDhcpRelaySrvAddressEntry OBJECT-TYPE
SYNTAX FsMIDhcpRelaySrvAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX {
fsMIDhcpContextId,
fsMIDhcpRelaySrvIpAddress
}
::= { fsMIDhcpRelaySrvAddressTable 1 }
FsMIDhcpRelaySrvAddressEntry ::= SEQUENCE {
fsMIDhcpRelaySrvIpAddress IpAddress,
fsMIDhcpRelaySrvAddressRowStatus RowStatus
}
fsMIDhcpRelaySrvIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address of the DHCP server."
::= { fsMIDhcpRelaySrvAddressEntry 1 }
fsMIDhcpRelaySrvAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus of this entry."
::= { fsMIDhcpRelaySrvAddressEntry 2 }
--****************** IPADDRESS_TABLE_END *******************************
--******************** INTERFACE_TABLE_BEGIN ***************************
fsMIDhcpRelayIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDhcpRelayIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the circuit id SubOption configured over the
interface.This option will be inserted for dhcp request packets
received on this interface based on the status of
fsMIDhcpRelayRAICircuitIDSubOptionControl.Using this table,the dhcp
broadcast response is sent on the appropriate interface over which
the broadcast dhcp request was received."
::= { fsMIDhcpRelayTable 3 }
fsMIDhcpRelayIfEntry OBJECT-TYPE
SYNTAX FsMIDhcpRelayIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains configured dhcp relay information suboptions"
INDEX {
fsMIDhcpContextId,
ifIndex
}
::= { fsMIDhcpRelayIfTable 1 }
FsMIDhcpRelayIfEntry ::= SEQUENCE {
fsMIDhcpRelayIfCircuitId Unsigned32,
fsMIDhcpRelayIfRemoteId DisplayString,
fsMIDhcpRelayIfRowStatus RowStatus
}
fsMIDhcpRelayIfCircuitId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Circuit Id value configured over this interface.Configuring
with zero value will reset the circuit id configuration for this
interface.Circuit id will be inserted to dhcp request packet received
on this interface if fsMIDhcpRelayRAICircuitIDSubOptionControl is enabled.
Current implementation restricts circuit-id to interface indices alone"
::= { fsMIDhcpRelayIfEntry 1 }
fsMIDhcpRelayIfRemoteId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote Id value configured over this interface.String of length zero
will reset the configuration.Value other than XYZ (which is the
considered as default value internally) can be configured for this
object.Configuring with <MGMT_IP_ADDR> string will replace the
remote Id with Default VLAN IP address and configuring with
<SYS_NAME> will replace the remote_id with System_name.
Remote ID will be inserted to dhcp request packet received
on this interface if fsMIDhcpRelayRAIRemoteIDSubOptionControl is enabled"
::= { fsMIDhcpRelayIfEntry 2 }
fsMIDhcpRelayIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of this table"
::= { fsMIDhcpRelayIfEntry 3 }
-- ************ END OF INTERFACE TABLE *********************************
END
-- *************** END OF DHCP RELAY MI MIB ****************************
View Git Blame Copy Permalink