--****************************************************************************** --Copyright (C) 2012 Aricent Inc . All Rights Reserved -- --$Id: fsmidhcpRelay.mib,v 1.1 2015/06/17 04:55:23 siva Exp $ -- --Description : This file contains MIB definitions for ISS module. -- --****************************************************************************** -- AricentISS MIB Definition -- MIB for 'DHCP Relay MI MIB' ARICENT-DHCP-RLY-MI-MIB DEFINITIONS ::= BEGIN IMPORTS Unsigned32, MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Counter32, Integer32,enterprises FROM SNMPv2-SMI RowStatus,DisplayString FROM SNMPv2-TC ifIndex FROM IF-MIB; futureMIDhcpRelay MODULE-IDENTITY LAST-UPDATED "20141028000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "ARICENT COMMUNICATIONS SOFTWARE 3460 Hillview Avenue, Palo Alto, CA 94304-1388, USA, Phone : +1-650-391-1088 E-mail:support@aricent.com" DESCRIPTION "The enterprise ID 29601 is assigned to Aricent Communication Holdings Limitied." REVISION "20141028000Z" DESCRIPTION "The Dhcp MI Relay agent MIB " ::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 92 } -- ----------------------------------------------------------------- -- -- groups in the MIB -- ----------------------------------------------------------------- -- fsMIDhcpRelay OBJECT IDENTIFIER ::= { futureMIDhcpRelay 1 } fsMIDhcpRelayTable OBJECT IDENTIFIER ::= { futureMIDhcpRelay 2 } --SCALAR_TABLE_BEGIN fsMIDhcpConfigGblTraceLevel OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Global trace level Object which has bit masks for various levels of tracing " DEFVAL { 1 } ::= { fsMIDhcpRelay 1 } --SCALAR_TABLE_END -- ******************* DHCP RELAY MI Configuration ******************** -- *************Context table for DHCP Relay MI support *************** fsMIDhcpContextTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIDhcpContextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This context table contains the global parameters of DHCP Relay that is required to be configured for each context." ::= { fsMIDhcpRelayTable 1 } fsMIDhcpContextEntry OBJECT-TYPE SYNTAX FsMIDhcpContextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry for the configuration in a particular VR." INDEX { fsMIDhcpContextId } ::= { fsMIDhcpContextTable 1 } FsMIDhcpContextEntry ::= SEQUENCE { fsMIDhcpContextId Integer32, fsMIDhcpRelaying INTEGER, fsMIDhcpRelayServersOnly INTEGER, fsMIDhcpRelaySecsThreshold INTEGER, fsMIDhcpRelayHopsThreshold Integer32, fsMIDhcpRelayRAIOptionControl INTEGER, fsMIDhcpRelayRAICircuitIDSubOptionControl INTEGER, fsMIDhcpRelayRAIRemoteIDSubOptionControl INTEGER, fsMIDhcpRelayRAISubnetMaskSubOptionControl INTEGER, fsMIDhcpRelayRAIOptionInserted Counter32, fsMIDhcpRelayRAICircuitIDSubOptionInserted Counter32, fsMIDhcpRelayRAIRemoteIDSubOptionInserted Counter32, fsMIDhcpRelayRAISubnetMaskSubOptionInserted Counter32, fsMIDhcpRelayRAIOptionWronglySet Counter32, fsMIDhcpRelayRAISpaceConstraint Counter32, fsMIDhcpConfigTraceLevel Integer32, fsMIDhcpConfigDhcpCircuitOption BITS, fsMIDhcpRelayCounterReset INTEGER, fsMIDhcpRelayContextRowStatus RowStatus } fsMIDhcpContextId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the virtual router in which the configuration is done." ::= { fsMIDhcpContextEntry 1 } fsMIDhcpRelaying OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Only when enabled, the Relay Agent shall become active." DEFVAL { disable } ::= { fsMIDhcpContextEntry 2 } fsMIDhcpRelayServersOnly OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, the Relay Agent shall forward the packets from the client to a specific DHCP server." DEFVAL { disable } ::= { fsMIDhcpContextEntry 3 } fsMIDhcpRelaySecsThreshold OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IF the secs field in the DHCP message is greater than the fsMIDhcpRelaySecsThreshold, Packet get dropped at the Relay Agent" DEFVAL { 0 } ::= { fsMIDhcpContextEntry 4 } fsMIDhcpRelayHopsThreshold OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "A maximum hop count,a relay agent allow to pass through it.If the HopCount in the Dhcp Message is greater than the fsMIDhcpRelayHopsThreshold, Packet get dropped at the Relay Agent " DEFVAL { 4 } ::= { fsMIDhcpContextEntry 5 } fsMIDhcpRelayRAIOptionControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Only when enabled, the Relay Agent shall do any processing related to Relay Agent Information Options - like inserting the necessary options while relaying a packet from a client to a server and examining/stripping of options when relaying a packet from a server to a client." DEFVAL { disable } ::= { fsMIDhcpContextEntry 6 } fsMIDhcpRelayRAICircuitIDSubOptionControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the CircuitID sub-option, when necessary, while relaying packets from a client to server and also examines/strips off this sub-option while relaying packets from a server to a client." DEFVAL { disable } ::= { fsMIDhcpContextEntry 7 } fsMIDhcpRelayRAIRemoteIDSubOptionControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the RemoteID sub-option, when necessary, while relaying packets from a client to server and also examines/strips off this sub-option while relaying packets from a server to a client." DEFVAL { disable } ::= { fsMIDhcpContextEntry 8 } fsMIDhcpRelayRAISubnetMaskSubOptionControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the Subnet Mask sub-option, when necessary, while relaying packets from a client to server and also examines/strips off this sub-option while relaying packets from a server to a client." DEFVAL { disable } ::= { fsMIDhcpContextEntry 9 } fsMIDhcpRelayRAIOptionInserted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets in which the RelayAgent inserted the RAIOption." ::= { fsMIDhcpContextEntry 10 } fsMIDhcpRelayRAICircuitIDSubOptionInserted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets in which the RelayAgent inserted the CircuitID SubOption." ::= { fsMIDhcpContextEntry 11 } fsMIDhcpRelayRAIRemoteIDSubOptionInserted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets in which the RelayAgent inserted the RemoteID SubOption." ::= { fsMIDhcpContextEntry 12 } fsMIDhcpRelayRAISubnetMaskSubOptionInserted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets in which the RelayAgent inserted the SubnetMask SubOption." ::= { fsMIDhcpContextEntry 13 } fsMIDhcpRelayRAIOptionWronglySet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets dropped by the Relay Agent because the giaddr field is not set but the RAI option exists in the packet." ::= { fsMIDhcpContextEntry 14 } fsMIDhcpRelayRAISpaceConstraint OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets in which the RAI Option wasnot inserted by the Relay Agent because if inserted the packetsize shall exceed the MTU." ::= { fsMIDhcpContextEntry 15 } fsMIDhcpConfigTraceLevel OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Trace level Object which has bit masks for various levels of tracing " DEFVAL { 1 } ::= { fsMIDhcpContextEntry 16 } fsMIDhcpConfigDhcpCircuitOption OBJECT-TYPE SYNTAX BITS { routerindex(0), -- Router Interfce Index vlanid(1), -- vlanId recvport(2) -- port or lag port } MAX-ACCESS read-write STATUS current DESCRIPTION "This Object defines the type of information to be present in circuit id sub-option.And this option can specfied only if CircuitIDSubOptionControl is enabled.It is possible to set more than one bit at a time.Currently first three bits are used and remaning bits are reserved for future purpose.Default value for this option is routerindex(00000001)." DEFVAL { 1 } ::= { fsMIDhcpContextEntry 17 } fsMIDhcpRelayCounterReset OBJECT-TYPE SYNTAX INTEGER { set (1), notset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to reset the statistics counters. When set to set(1), statistics counters will be cleared. When set to notset(2), no action will take place. " DEFVAL { notset } ::= { fsMIDhcpContextEntry 18 } fsMIDhcpRelayContextRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status of this table" ::= { fsMIDhcpContextEntry 19 } -- ********************End of Context Table******************************** -- ***********************IPADDRESS_TABLE_BEGIN *************************** fsMIDhcpRelaySrvAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIDhcpRelaySrvAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IP addresses of the DHCP Server to which the Relay Agent needs to forward the packets from the client. This object becomes active only when dhcpRelayServersOnly is enabled." ::= { fsMIDhcpRelayTable 2 } fsMIDhcpRelaySrvAddressEntry OBJECT-TYPE SYNTAX FsMIDhcpRelaySrvAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { fsMIDhcpContextId, fsMIDhcpRelaySrvIpAddress } ::= { fsMIDhcpRelaySrvAddressTable 1 } FsMIDhcpRelaySrvAddressEntry ::= SEQUENCE { fsMIDhcpRelaySrvIpAddress IpAddress, fsMIDhcpRelaySrvAddressRowStatus RowStatus } fsMIDhcpRelaySrvIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address of the DHCP server." ::= { fsMIDhcpRelaySrvAddressEntry 1 } fsMIDhcpRelaySrvAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus of this entry." ::= { fsMIDhcpRelaySrvAddressEntry 2 } --****************** IPADDRESS_TABLE_END ******************************* --******************** INTERFACE_TABLE_BEGIN *************************** fsMIDhcpRelayIfTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIDhcpRelayIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table holds the circuit id SubOption configured over the interface.This option will be inserted for dhcp request packets received on this interface based on the status of fsMIDhcpRelayRAICircuitIDSubOptionControl.Using this table,the dhcp broadcast response is sent on the appropriate interface over which the broadcast dhcp request was received." ::= { fsMIDhcpRelayTable 3 } fsMIDhcpRelayIfEntry OBJECT-TYPE SYNTAX FsMIDhcpRelayIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains configured dhcp relay information suboptions" INDEX { fsMIDhcpContextId, ifIndex } ::= { fsMIDhcpRelayIfTable 1 } FsMIDhcpRelayIfEntry ::= SEQUENCE { fsMIDhcpRelayIfCircuitId Unsigned32, fsMIDhcpRelayIfRemoteId DisplayString, fsMIDhcpRelayIfRowStatus RowStatus } fsMIDhcpRelayIfCircuitId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Circuit Id value configured over this interface.Configuring with zero value will reset the circuit id configuration for this interface.Circuit id will be inserted to dhcp request packet received on this interface if fsMIDhcpRelayRAICircuitIDSubOptionControl is enabled. Current implementation restricts circuit-id to interface indices alone" ::= { fsMIDhcpRelayIfEntry 1 } fsMIDhcpRelayIfRemoteId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Remote Id value configured over this interface.String of length zero will reset the configuration.Value other than XYZ (which is the considered as default value internally) can be configured for this object.Configuring with string will replace the remote Id with Default VLAN IP address and configuring with will replace the remote_id with System_name. Remote ID will be inserted to dhcp request packet received on this interface if fsMIDhcpRelayRAIRemoteIDSubOptionControl is enabled" ::= { fsMIDhcpRelayIfEntry 2 } fsMIDhcpRelayIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status of this table" ::= { fsMIDhcpRelayIfEntry 3 } -- ************ END OF INTERFACE TABLE ********************************* END -- *************** END OF DHCP RELAY MI MIB ****************************