WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/adtran/ADTRAN-TACONTROLER-PRODUCT-MIB

3843 lines
152 KiB
Plaintext
Raw Permalink Blame History

ADTRAN-TACONTROLER-PRODUCT-MIB DEFINITIONS ::= BEGIN
-- TITLE: The ADTRAN TA3000 MIB
-- PRODUCT: 1181001L1
-- VERSION: 1.14
-- DATE: 10/15/2008
-- DATE: 10/24/2008
-- AUTHOR: Arthur Poleon
-- SNMP: SNMPv2
-- MIB ARC: adtran.adShared
-- NOTES
-- This is a generic MIB for all versions of the Total Access System Controller
-- Units that use the second generation RMD files and the generic chassis MIBs.
-- This MIB defines the object identifier (OID) for PCU HDX, SCU, OPTI6100,
-- TA5000, TA110F, and others...
-- HISTORY:
-- 11/01/2005 ap First edition.
-- 11/11/2005 rjf Update descriptions.
-- 11/16/2005 rjf More description updates.
-- 11/17/2005 KGG Changed taControllerMgmt to adTaControllerMgmt
-- 02/06/2006 KMM Changes while adding support for packed sstate msgs, added:
-- *) adTASetSingleServiceStateMsgFail
-- *) adTAGetSingleServiceStateMsgFail
-- *) adTASetAllServiceStateMsgFail
-- *) adTAGetAllServiceStateMsgFail
-- 04/03/2006 KMM Added support for provisioning mismatch alarm by adding
-- adTACleiCodeMisMatch.
-- 04/05/2006 JMC Added adTATIDSysNameSyncEnable.
-- 04/06/2006 DLW Added active/clear adTASoftwareVerMisMatch traps for the
-- software version mismatch alarm.
-- 05/03/2006 KGG Initial work on adding Power Shedding OIDs and Traps
-- to be completed by JMC - grep adTASysCtrlPowerShed for OIDs
-- grep PowerShedding for Traps
-- 05/09/2006 JMC Added Power Shedding OIDs and Alarms.
-- 05/11/2006 JMC Fixed up adTASysCtrlPowerShedAlmInput description with regard to TA3000.
-- 06/02/2006 JMC A few touches to Power Shedding provitems. Added Module Discovery Status stuff.
-- 06/12/2006 KMM Adding support for HFANM. Added:
-- *) adTAFanMPowerAFailClear
-- *) adTAFanMPowerAFail
-- *) adTAFanMPowerBFailClear
-- *) adTAFanMPowerBFail
-- 06/09/2006 JMC Added shelf-indexed table for new alarm status OID.
-- Changed some naming of my previous slot-indexed table.
-- 06/19/2006 KGG Changed Cri,Maj,Min Relay Test Alarm Severities to match alarm type.
-- 09/26/2006 KGG Added adTACleiCodeMisMatchClear ID: 1006324.
-- 09/28/2006 KGG Updated Description of the PowerShedCountDown OID.
-- 10/05/2006 BKP Added OIDs and traps for System Release Manager feature support.
-- 10/05/2006 BKP Added OIDs and traps for System Release Manager feature support.
-- Fixed compiler Not Used Warning by removing adGenSlotProdSwVersion from the IMPORTS section.
-- Added a SRM release incomplete bitmask value of 32 Internal Modspec Info Error(Parser doesn't have info)
-- 10/11/2006 BKP Changed Release Incomplete references to Release Error. Modified incomplete bitmask and alarms.
-- 10/19/2006 BKP Changed the SRM Release Files table to return 1 string of all its info with adTaSysCtrlSrmRlsFilesInfo,
-- rather than having individual OIDs for the different types of file info. This new format improves readability.
-- Added adTaSysCtrlSrmUpgradeFilename as a varbind for the SRM Upgrade Traps, and adTaSysCtrlSrmReleaseFilename
-- as a varbind for the SRM Primary Backup Traps.
-- 11/03/2006 BKP Added adTaSysCtrlSrmUpgradeRetries and adTaSysCtrlSrmValidateInterval to support the new SRM provisioning options.
-- 11/06/2006 BKP Changed the interval for adTaSysCtrlSrmValidateInterval from hours to days, and decreased the max value to 365.
-- 11/30/2006 BKP Added the following description field text to select SRM prov items, "Sets to this OID will have no effect if the SRM system is busy."
-- 11/30/2006 RJF Add adTaSysCtrlAutoUpgrade brx @ 1.3.6.1.4.1.664.5.63.100
-- 01/02/2007 DLW Added adTASysCtrlAlarmSeverityChanged and adTASysCtrlAlarmSeverityLevel for Alarm Severity.
-- 01/23/2007 BKP Added adTaSysCtrlSrmSupport to be able to Enable and Disable the SRM feature.
-- 01/24/2007 BKP Changed adTaSysCtrlSrmSupport to adTaSysCtrlSrmAutoUpgradeCtrl.
-- 02/20/2007 BKP Removed KEY3's for SRM scheduled timers because they are only displayed with tech. supt.
-- privileges on the SRM more details screen. Also removed SNMP support and renumbered the SRM
-- OIDs, since we have not released this code.
-- Changed SRM variables and text to support the SRM "Download", "Activate", "Active Release", and "Backup Release" terminology.
-- 02/23/2007 DLW Added Traps adTASysCtrlDeviceComFail, adTASysCtrlSwdnldStarted, adTASysCtrlSwdnldComplete, adTASysCtrlSwdnldFailure
-- 03/14/2007 AP Add adTaSysCtrlFileExport - adTaSysCtrlSeltDelt - adTaSysCtrlGeneralFileExport - adTaSysCtrlSystemLog
-- 08/15/2007 RJF Add adTaSysCtrlAutoUpgradeErrorSlots.
-- 11/05/2007 KABC Added support for KEY3_GENERATE_SSH_KEYS, KEY3_GENERATE_SSH_KEY_SIZE, and KEY3_CURRENT_SSH_KEY_SIZE.
-- 11/07/2007 KABC Added support for KEY3_GENERATING_KEY_STATUS.
-- 11/12/2007 KABC Corrected OBJECT IDENTIFIER definition for adTaSysCtrlSysSshKeyMgmt
-- 12/06/2007 AP Add DHCP Server Management OIDs
-- 01/24/2008 RJF Add Module Reset Oids
-- 01/29/2008 BKP Add TL1 Echo OID
-- 02/12/2008 RJF Remove enum containing 0 (zero) from adTaModuleResetCtrl. The values are fully
-- documented in the OID-group comment heading.
-- 03/25/2008 AP Add SSL Oids.
-- 07/17/2008 KABC Deprecated adTASysCtrlAlarmSeverityLevel
-- 09/24/2008 RJF Add adTaSysCtrlAutoUpgradeNeededSlots adTaSysCtrlAutoUpgradeDeferredResetSlots,
-- adTaSysCtrlAutoUpgradeUseSCR
-- 09/24/2008 RJF Add adTaSysCtrlReboot brx @ 1.3.6.1.4.1.664.5.63.170
-- 10/02/2008 RJF Add adTaSysCtrlAutoUpgradeActiveSlotsBitmask, adTaSysCtrlAutoUpgradeErrorSlotsBitmask,
-- adTaSysCtrlAutoUpgradeNeededSlotsBitmask, adTaSysCtrlAutoUpgradeDeferResetSlotsBitmask,
-- adTaSysCtrlAutoUpgradeSCRStatus, adTaSysCtrlRebootInitiate, adTaSysCtrlRebootLastStatus,
-- adTaSysCtrlRebootException (trap- roughed in)
-- 10/15/2008 RJF Prior to release, change adTaSysCtrlAutoUpgradeUseSCR enum from enable/disable to yes/no to match menus.
-- Correct numeric oid assignment error in adTaSysCtrlAutoUpgradeSCRStatus.
-- 10/23/2008 AP Add adTaSntpGMTtimeZoneString
-- 10/24/2008 RJF Re-tweak adTaSysCtrlAutoUpgradeSCRStatus enum value names
-- 12/22/2008 RJF Change extended SCA/AutoUpgrade bitmask oids to accept/return up to 256 bytes because
-- some systems already do (was 128).
-- 01/27/2009 KABC Added adTATL1PortExchange
-- 04/20/2009 DLW Added severity OID adTASysCtrlPowerShedStateAlarmSeverity for power shed state.
-- Added severity variable to adTAPowerSheddingActivated.
-- 05/08/2009 AP Add syslog server 2, 3, and 4.
-- 06/29/2009 KABC Convert to version SNMP v2
-- 08/12/2009 WFE Added adTaSysCtrlRebootArmedStatus.
-- 02/01/2010 AP Move "adTaSysCtrlRebootException" (adTaSysCtrlReboot.0.1006368) to adTaControllerMgmt.0.1006368
-- also known as "adTaControllerMgmtTraps.1006368".
-- 06/22/2010 WFE Move "adTaSysCtrlRebootException" from adTaControllerMgmt.0.1006368 to adTaSysCtrlReboot.0.1006368.
-- Added adTASysCtrlPowerShedStateAlarmSeverity varbind to adTAPowerSheddingDeActivated trap to match adTAPowerSheddingActivated.
-- 07/20/2010 WFE Added adTAPowerSheddingServerTimeoutClear and adTAPowerSheddingServerTimeout.
-- Increased max value of adTASysCtrlPowerShedAlmInput from 17 to 18.
-- 02/10/2011 AP Added adTaSntpServer2, adTaSntpServer3, adTaSntpServer4, adTaSntpTimeOutProv, adTaSntpTimeRetryProv
-- 05/09/2011 WFE "DO NOT MAKE HISTORY COMMENTS HERE!!!! Revision history now in REVISION/DESCRIPTION clauses below"
IMPORTS
Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, IpAddress, TimeTicks, Counter32
FROM SNMPv2-SMI
adShared
FROM ADTRAN-MIB
adTrapInformSeqNum
FROM ADTRAN-GENTRAPINFORM-MIB
DisplayString
FROM SNMPv2-TC
sysName
FROM SNMPv2-MIB
adGenSlotInfoIndex, adGenSlotProdPartNumber, adGenSlotProdName, adGenSlotProdCLEIcode
FROM ADTRAN-GENSLOT-MIB
adGenPortTrapIdentifier
FROM ADTRAN-GENPORT-MIB
adTAeSCUenvAlarmUserName, adTAeSCUenvAlarmInputLevel, adTAeSCUTrapAlarmLevel
FROM ADTRAN-TAeSCUEXT1-MIB
ifIndex
FROM IF-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB;
-- Module ID ================================================================================================
adTaControllerMgmt MODULE-IDENTITY
LAST-UPDATED "202107201540Z"
ORGANIZATION
"ADTRAN, Inc."
CONTACT-INFO
"CND Tech Support
Postal: ADTRAN, Inc.
901 Explorer Blvd.
Huntsville, AL 35806
Tel: +1 800 726-8663
Fax: +1 256 963 6217
E-mail: support@adtran.com"
DESCRIPTION
"ADTRAN TA Controller Products MIB"
REVISION "202107201540Z"
DESCRIPTION
"Update support for signed certificate requests/signed certificates to provide import/export status."
REVISION "202106300000Z"
DESCRIPTION
"Add support for generating signed certificate requests and importation of signed certs."
REVISION "201606130000Z"
DESCRIPTION
"Add support IPV6 address for SCM servers."
REVISION "201310231139Z"
DESCRIPTION
"Decrease severity of adTaSysCtrlAutoUpgradeEOSSWarningActive (and *Clear)
from Minor to Warning(Alert)
Decrease severity of adTaSysCtrlAutoUpgradeEOSSDeniedActive (and *Clear)
from Major to Minor.
Minor rewording of the EOSS Warning/Deny descriptions."
REVISION "201310171355Z"
DESCRIPTION
"Add initial support for AutoUpgrade EOSS (End Of Software Support) query and trap oids.
Clarify several AutoUpgrade bitmask descriptions."
REVISION "201310151500Z"
DESCRIPTION
"Add system configuration change alarm."
REVISION "201305031500Z"
DESCRIPTION
"Add adTaGeneralExportRemoteHostMethod - File transfer method to use to transfer General Export files from the controller."
REVISION "201206191500Z"
DESCRIPTION
"Add adTaGenExportExceptionReportEnable - Enable/Disable automatically generated exception reports."
REVISION "201107181639Z"
DESCRIPTION
"Added adTASysCtrlCardNotReady, adTASysCtrlCardReady, adTASysCtrlCardNotSensed, adTASysCtrlCardSensed"
REVISION "201106300000Z"
DESCRIPTION
"Added adTaSysCtrlVLANBridge, adTaSysCtrlVLANBridgeMode, adTaSysCtrlVLANBridgeInterface.
Added adTaSntpServer2, adTaSntpServer3, adTaSntpServer4, adTaSntpTimeOutProv, adTaSntpTimeRetryProv
adTaSntpTimeOutCountServer2, adTaSntpTimeOutCountServer3, adTaSntpTimeOutCountServer4,
adTaSntpCurrentServer, adTaGenExportPrefixString, adTaGenExportSuffixString"
REVISION "201105091256Z"
DESCRIPTION "Added adTAScmEthernetInterfaceModeTable."
REVISION "201611280000Z"
DESCRIPTION "Added adTaSysCtrlReKeyTimeout, adTaSysCtrlReKeyDataLimit, and adTaSysCtrlRebootMode."
::= { adShared 63 }
-- OBJECT IDENTIFIERS =======================================================================================
adTaSysCtrlShelf OBJECT IDENTIFIER ::= { adTaControllerMgmt 30 }
adTaSysCtrlSlot OBJECT IDENTIFIER ::= { adTaControllerMgmt 40 }
adTaSysCtrlScaMgmt OBJECT IDENTIFIER ::= { adTaControllerMgmt 50 }
adTaSysCtrlProvMgmt OBJECT IDENTIFIER ::= { adTaControllerMgmt 60 }
adTaSysCtrlPowerShed OBJECT IDENTIFIER ::= { adTaControllerMgmt 70 }
adTaSysCtrlSysSSHMgmt OBJECT IDENTIFIER ::= { adTaControllerMgmt 80 }
adTaSysCtrlSysRlsMgmt OBJECT IDENTIFIER ::= { adTaControllerMgmt 90 }
adTaSysCtrlAutoUpgrade OBJECT IDENTIFIER ::= { adTaControllerMgmt 100 }
adTaSysCtrlFileExport OBJECT IDENTIFIER ::= { adTaControllerMgmt 110 }
adTaSysCtrlSNTP OBJECT IDENTIFIER ::= { adTaControllerMgmt 120 }
adTaSysLog OBJECT IDENTIFIER ::= { adTaControllerMgmt 130 }
adTaDhcpServer OBJECT IDENTIFIER ::= { adTaControllerMgmt 140 }
adTaModuleReset OBJECT IDENTIFIER ::= { adTaControllerMgmt 150 }
adTaSecurity OBJECT IDENTIFIER ::= { adTaControllerMgmt 160 }
adTaSysCtrlReboot OBJECT IDENTIFIER ::= { adTaControllerMgmt 170 }
adTaSysAlarmVarbinds OBJECT IDENTIFIER ::= { adTaControllerMgmt 180 }
adTaSysCtrlVLANBridge OBJECT IDENTIFIER ::= { adTaControllerMgmt 190 }
adTaSysCtrlSystemLog OBJECT IDENTIFIER ::= { adTaSysCtrlFileExport 1 }
adTaSysCtrlGeneralFileExport OBJECT IDENTIFIER ::= { adTaSysCtrlFileExport 20 }
adTaSSLConfiguration OBJECT IDENTIFIER ::= { adTaSecurity 50}
adTaSSLRemoteKeyDownload OBJECT IDENTIFIER ::= { adTaSSLConfiguration 100}
--
-- Controller SCA support for primary and secondary shelves
--
adTaSysCtrlScaTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdTaSysCtrlScaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Expansion OIDs for the HDX system."
::= { adTaSysCtrlScaMgmt 20 }
adTaSysCtrlScaEntry OBJECT-TYPE
SYNTAX AdTaSysCtrlScaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { adTaSysCtrlCUShelfNumber }
::= { adTaSysCtrlScaTable 1 }
AdTaSysCtrlScaEntry ::=
SEQUENCE {
adTaSysCtrlCUShelfNumber
INTEGER,
adTaSysCtrlSCAProvItemChanged
OCTET STRING,
adTaSysCtrlSCAPresentCards
OCTET STRING,
adTaSysCtrlSCASlotsWithProvData
OCTET STRING,
adTaSysCtrlSCAoptRestoreCardBitmask
OCTET STRING
}
adTaSysCtrlCUShelfNumber OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The shelf number the controller is installed in."
::= { adTaSysCtrlScaEntry 1 }
adTaSysCtrlSCAProvItemChanged OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bitmap of cards with changed provisions. This read-only
OID will return a bitmap of slots whose provisions have
changed since power-up or the last SCA save operation.
This is an ascending sequence of bits where the LSB (Least
Significant Bit) of the first byte corresponds to slot 1,
the LSB of the second byte corresponds to slot 9, with
ascending slot numbers being represented until the last
byte. In general, only the bytes required to convey all
the 1 bits will actually be sent, all remaining unsent
bytes are implied to contain only 0s. At least one
byte will be sent.
A bit value of 1 indicates provisions have been changed."
::= { adTaSysCtrlScaEntry 5 }
adTaSysCtrlSCAPresentCards OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bitmap of cards 'present' in the shelf. This read-only
OID will return a bitmap of slots with cards installed.
This is an ascending sequence of bits where the LSB (Least
Significant Bit) of the first byte corresponds to slot 1,
the LSB of the second byte corresponds to slot 9, with
ascending slot numbers being represented until the last
byte. In general, only the bytes required to convey all
the 1 bits will actually be sent, all remaining unsent
bytes are implied to contain only 0s. At least one
byte will be sent.
A bit value of 1 indicates a card is present."
::= { adTaSysCtrlScaEntry 7 }
adTaSysCtrlSCASlotsWithProvData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bitmap of slots with provision data. This read-only OID
will return a bitmap of slots with provision information.
This is an ascending sequence of bits where the LSB (Least
Significant Bit) of the first byte corresponds to slot 1,
the LSB of the second byte corresponds to slot 9, with
ascending slot numbers being represented until the last
byte. In general, only the bytes required to convey all
the 1 bits will actually be sent, all remaining unsent
bytes are implied to contain only 0s. At least one
byte will be sent.
A bit value of 1 indicates provisions are present."
::= { adTaSysCtrlScaEntry 9 }
adTaSysCtrlSCAoptRestoreCardBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SCA restore to linecard enable bitmask. This OID accesses
an enable/disable bitmap indicating which slots should have
their provision information restored during an SCA restore
operation.
This is an ascending sequence of bits where the LSB (Least
Significant Bit) of the first byte corresponds to slot 1,
the LSB of the second byte corresponds to slot 9, with
ascending slot numbers being represented until the last
byte. In general, only the bytes required to convey all
the 1 bits will actually be sent, all remaining unsent
bytes are implied to contain only 0s. At least one
byte will be sent.
A bit value of 1 indicates restoration of provision
information is enabled for the corresponding slot."
::= { adTaSysCtrlScaEntry 11 }
adTaSysCtrlSCAConfigChangeVersion OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current version number of the SCA file.
If a change happen on the system, this OID will return the next
version of the SCA file."
::= { adTaSysCtrlScaMgmt 3 }
--
-- Controller Provisioning
--
adTATIDSysNameSyncEnable OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the synchronization of the TID and SNMP SysName provisions.
Enabling this option will overwrite the current SysName with the TID and any
subsequent set to the SysName must meet TID syntax restrictions."
::= { adTaSysCtrlProvMgmt 10 }
adTATL1echoEnable OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable character echo on the TL1 port."
::= { adTaSysCtrlProvMgmt 11 }
adTATL1PortExchange OBJECT-TYPE
SYNTAX INTEGER { exchange(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Exchange the TL1 ports."
::= { adTaSysCtrlProvMgmt 12 }
adTAScmEthernetInterfaceModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdTAScmEthernetInterfaceModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of ethernet interface modes."
::= { adTaSysCtrlProvMgmt 13 }
adTAScmEthernetInterfaceModeEntry OBJECT-TYPE
SYNTAX AdTAScmEthernetInterfaceModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Set ethernet interface mode to ethercraft or ethernet."
INDEX { ifIndex }
::= { adTAScmEthernetInterfaceModeTable 1 }
AdTAScmEthernetInterfaceModeEntry ::= SEQUENCE {
adTAScmEthernetInterfaceMode INTEGER
}
adTAScmEthernetInterfaceMode OBJECT-TYPE
SYNTAX INTEGER { ethercraft(1), ethernet(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set ethernet interface mode to ethercraft or ethernet."
::= { adTAScmEthernetInterfaceModeEntry 1 }
--
-- Controller Power Shed
--
adTASysCtrlPowerShedEnable OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global Enable / Disable of Power Shedding for the entire system."
::= { adTaSysCtrlPowerShed 10 }
adTASysCtrlPowerShedAlmInput OBJECT-TYPE
SYNTAX INTEGER (1..18)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the External Alarm Input that will be monitored that will indicate loss of AC power.
The enumerated set of values is system-dependent.
For TA5000:
External 1 = 1
External 2 = 2,
External 3 = 3,
External 4 = 4,
External 5 = 5,
External 6 = 6,
External 7 = 7,
External 8 = 8,
External 9 = 9,
External 10 = 10,
External 11 = 11,
External 12 = 12,
External 13 = 13,
External 14 = 14,
External 15 = 15,
External 16 = 16,
External ACO = 17,
Remote Server = 18
For OSP:
External 1 = 1
External 2 = 2,
External 3 = 3,
External 4 = 4,
External 5 = 5,
External ACO = 6,
Remote Server = 7
For TA3000 / HDX Systems:
External 1 = 1
External 2 = 2,
Remote = 3,
External ACO = 4
"
::= { adTaSysCtrlPowerShed 11 }
adTASysCtrlPowerShedActivateDelay OBJECT-TYPE
SYNTAX INTEGER (1..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the number of minutes the controller
should wait to initiate Power Shedding once AC power is lost."
::= { adTaSysCtrlPowerShed 12 }
adTASysCtrlPowerShedDeActivateDelay OBJECT-TYPE
SYNTAX INTEGER (1..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the number of minutes the controller
should wait to cancel Power Shedding once AC power is restored."
::= { adTaSysCtrlPowerShed 13 }
adTASysCtrlPowerShedACFailAlarmDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User specified string that describes the AC failure alarm."
::= { adTaSysCtrlPowerShed 14 }
adTASysCtrlPowerShedACFailAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER
{
info(2),
alert(3),
minor(4),
major(5),
critical(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Power Shedding AC Failure alarm severity."
::= { adTaSysCtrlPowerShed 15 }
adTASysCtrlPowerShedACFailAlarmAIDIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AID Index."
::= { adTaSysCtrlPowerShed 16 }
adTASysCtrlPowerShedACFailAlarmConditionCode OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..11))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Condition code."
::= { adTaSysCtrlPowerShed 17 }
adTASysCtrlPowerShedStatus OBJECT-TYPE
SYNTAX INTEGER { inactive(1), inactiveWaitingToActivate(2), active(3), activeWaitingToDeactivate(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the current Power Shedding Status of the System."
::= { adTaSysCtrlPowerShed 30 }
adTASysCtrlPowerShedCountDown OBJECT-TYPE
SYNTAX INTEGER (0..1440)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Countdown timer indicating the number of minutes remaining until Power Shedding is Activated or
until Power Shedding is Deactivated. If Power Shedding is ENABLED and the CountDown is zero (0),
it means the countdown time has expired and Power Shedding is taking place. If Power Shedding is
DISABLED and the CountDown is zero (0), it means Power Shedding is Inactive or Off."
::= { adTaSysCtrlPowerShed 31 }
adTASysCtrlPowerShedStateAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER
{
info(2),
alert(3),
minor(4),
major(5),
critical(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Power Shedding State alarm severity."
::= { adTaSysCtrlPowerShed 32 }
adTASysCtrlPowerShedRemoteServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote Power-Shedding server IP address. Zero
signifies 'none'."
::= { adTaSysCtrlPowerShed 33 }
--
-- Slot Indexed Table
--
adTASysCtrlModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdTASysCtrlModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of status OIDs indexed by slot/module."
::= { adTaSysCtrlSlot 3 }
adTASysCtrlModuleEntry OBJECT-TYPE
SYNTAX AdTASysCtrlModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { adTASysCtrlModuleNumber }
::= { adTASysCtrlModuleTable 1 }
AdTASysCtrlModuleEntry ::= SEQUENCE {
adTASysCtrlModuleNumber INTEGER,
adTASysCtrlModuleDiscoveryStatus INTEGER
}
adTASysCtrlModuleNumber OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for each slot/module."
::= { adTASysCtrlModuleEntry 1 }
adTASysCtrlModuleDiscoveryStatus OBJECT-TYPE
SYNTAX INTEGER
{
empty (1),
discovering (2),
ok-no-rmd (3),
ok (4),
unresponsive (5),
unknown (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current discovery status of each slot or module in the system."
::= { adTASysCtrlModuleEntry 2 }
--
-- Shelf Indexed Table
--
adTASysCtrlShelfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdTASysCtrlShelfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A shelf-indexed table of information."
::= { adTaSysCtrlShelf 3 }
adTASysCtrlShelfEntry OBJECT-TYPE
SYNTAX AdTASysCtrlShelfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { adTASysCtrlShelfNumber }
::= { adTASysCtrlShelfTable 1 }
AdTASysCtrlShelfEntry ::= SEQUENCE {
adTASysCtrlShelfNumber INTEGER,
adTASysCtrlModuleRemovedStatus OCTET STRING
}
adTASysCtrlShelfNumber OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index representing each shelf."
::= { adTASysCtrlShelfEntry 1 }
adTASysCtrlModuleRemovedStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bitmask representing Module Removed status for each shelf.
Trailing empty bytes are truncated."
::= { adTASysCtrlShelfEntry 2 }
--
-- Controller System SSH Manager OIDs
--
adTaSysCtrlSysSshKeyMgmt OBJECT IDENTIFIER
::= { adTaSysCtrlSysSSHMgmt 10 }
adTaSysCtrlCurrentKeySize OBJECT-TYPE
SYNTAX INTEGER (512..2048)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Read-only display of current key size."
::= { adTaSysCtrlSysSshKeyMgmt 1 }
adTaSysCtrlKeySize OBJECT-TYPE
SYNTAX INTEGER (512..2048)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets a new key size."
::= { adTaSysCtrlSysSshKeyMgmt 2 }
adTaSysCtrlGenerateKeys OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Generates new keys based upon new key size."
::= { adTaSysCtrlSysSshKeyMgmt 15 }
adTaSysCtrlGenKeyStatus OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of new keys generation process."
::= { adTaSysCtrlSysSshKeyMgmt 16 }
adTaSysCtrlReKeyTimeout OBJECT-TYPE
SYNTAX INTEGER (0..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time in minutes since last key exchange to trigger a rekey. The default value
is 480 minutes. Use 0 for no limit. "
DEFVAL { 480 }
::= { adTaSysCtrlSysSshKeyMgmt 20 }
adTaSysCtrlReKeyDataLimit OBJECT-TYPE
SYNTAX INTEGER (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of data exchange in megabytes since last key exchange to trigger a rekey. The default value
is 1000 megabytes. Use 0 for no limit."
DEFVAL { 1000 }
::= { adTaSysCtrlSysSshKeyMgmt 21 }
--
-- Controller System Release Manager OIDs
--
-- SRM Active and/or Backup Release Table
adTaSysCtrlSysRlsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdTaSysCtrlSysRlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SRM System Release Table."
::= { adTaSysCtrlSysRlsMgmt 1 }
adTaSysCtrlSysRlsEntry OBJECT-TYPE
SYNTAX AdTaSysCtrlSysRlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the SRM System Release Table."
INDEX { adTaSysCtrlSrmReleaseIndex }
::= { adTaSysCtrlSysRlsTable 1 }
AdTaSysCtrlSysRlsEntry ::=
SEQUENCE {
adTaSysCtrlSrmReleaseIndex
INTEGER,
adTaSysCtrlSrmReleaseName
DisplayString,
adTaSysCtrlSrmReleaseFilename
DisplayString,
adTaSysCtrlSrmReleaseStatus
DisplayString,
adTaSysCtrlSrmReleaseMemoryUsageKB
Integer32,
adTaSysCtrlSrmReleaseFileCount
Integer32,
adTaSysCtrlSrmReleaseProductCount
Integer32,
adTaSysCtrlSrmReleaseFilesTableEntries
Integer32,
adTaSysCtrlSrmReleaseErrorBitmask
Integer32
}
adTaSysCtrlSrmReleaseIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1 repersents the Active System Release, and
2 represents the Backup System Release."
::= { adTaSysCtrlSysRlsEntry 1 }
adTaSysCtrlSrmReleaseName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This OID displays the System Release Name."
::= { adTaSysCtrlSysRlsEntry 2 }
adTaSysCtrlSrmReleaseFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ReleaseFilename OID specifies the Release filename that
was retrieved by the System Release Manager system. This
release file contains information such as module part number,
firmware filename, and firmware file details that are necessary
to validate a System Release."
::= { adTaSysCtrlSysRlsEntry 3 }
adTaSysCtrlSrmReleaseStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Release Status indicates the current state, status, and
file counts for the Active or Backup system release.
For example: Idle, Complete, 27/27 Files"
::= { adTaSysCtrlSysRlsEntry 4 }
adTaSysCtrlSrmReleaseMemoryUsageKB OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of flash memory KBytes the System Release is
currently using to store the system release files."
::= { adTaSysCtrlSysRlsEntry 5 }
adTaSysCtrlSrmReleaseFileCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unique files in a System Release,
including the SRA file and the individual firmware files."
::= { adTaSysCtrlSysRlsEntry 6 }
adTaSysCtrlSrmReleaseProductCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of products supported by the System Release."
::= { adTaSysCtrlSysRlsEntry 7 }
adTaSysCtrlSrmReleaseFilesTableEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the adTaSysCtrlSysRlsFilesTable.
This value is the adTaSysCtrlSrmReleaseProductCount plus 1 for
the release file."
::= { adTaSysCtrlSysRlsEntry 8 }
adTaSysCtrlSrmReleaseErrorBitmask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A system release can be in error for several reasons,
and this bitmap is used to show which reason.
The various bit value positions are:
1 File Not Found
2 Invalid File Length
4 Invalid File CRC
8 Invalid File Checksum
16 Parse Failed
32 Internal Modspec Info Error(Parser doesn't have info)"
::= { adTaSysCtrlSysRlsEntry 9 }
-- SRM Release Files Table
adTaSysCtrlSysRlsFilesTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdTaSysCtrlSysRlsFilesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { adTaSysCtrlSysRlsMgmt 2 }
adTaSysCtrlSysRlsFilesEntry OBJECT-TYPE
SYNTAX AdTaSysCtrlSysRlsFilesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { adTaSysCtrlSrmReleaseIndex,
adTaSysCtrlSrmRlsFilesIndex }
::= { adTaSysCtrlSysRlsFilesTable 1 }
AdTaSysCtrlSysRlsFilesEntry ::=
SEQUENCE {
adTaSysCtrlSrmRlsFilesIndex
Integer32,
adTaSysCtrlSrmRlsFilesInfo
DisplayString
}
adTaSysCtrlSrmRlsFilesIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for a file that is part of a System Release.
There will be duplicate filenames in this table,
because different products may share firmware."
::= { adTaSysCtrlSysRlsFilesEntry 1 }
adTaSysCtrlSrmRlsFilesInfo OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This OID displays a release file's filename, product part number,
product rev range, file rev, and detailed file status info.
The file status info will display the size in KBytes stored to flash,
and timestamp when the file was stored.
If the File is not found, then this OID will display 'File Not Found'."
::= { adTaSysCtrlSysRlsFilesEntry 2 }
-- SRM Scalar OIDs
adTaSysCtrlSrmCancel OBJECT-TYPE
SYNTAX INTEGER {
cancelSrmCommand(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Request that the current System Release Manager operation
is be stopped. This OID will have no effect if the SRM system
is not active (Idle/Cancel/Error/Complete states)."
::= { adTaSysCtrlSysRlsMgmt 10 }
adTaSysCtrlSrmActivateBrls OBJECT-TYPE
SYNTAX INTEGER {
activateBackupRls(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID instructs the System Release Manager to make the
Backup and Active Releases to switch roles. The Backup
Release becomes the Active Release and vice versa. This OID
will have no effect if the SRM system is busy downloading,
backing up, or the Backup Release has errors. An Auto Upgrade
busy state will also inhibit this OID's operation."
::= { adTaSysCtrlSysRlsMgmt 11 }
adTaSysCtrlSrmBackupArls OBJECT-TYPE
SYNTAX INTEGER {
backupActiveRls(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID instructs the System Release Manager to overwrite the
Backup Release with a backup copy of the Active Release.
This OID will have no effect if the SRM system is busy downloading,
backing up, or the Backup Release has errors."
::= { adTaSysCtrlSysRlsMgmt 12 }
adTaSysCtrlSrmDownloadInitiate OBJECT-TYPE
SYNTAX INTEGER {
initiateSrmDownload(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID instructs the System Release Manager to replace the
Backup release files with the SRM Download Filename release.
SRM will use Remote IO to acquire files that are needed to complete
the new System release. This OID will have no effect if the SRM system
is busy downloading or backing up."
::= { adTaSysCtrlSysRlsMgmt 13 }
adTaSysCtrlSrmDownloadSameFiles OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the SRM Download Same Files option.
Enabling this option will instruct SRM to completly delete
the Backup release and remotely get every file that is
part of the new System release.
Disabling this option will instruct SRM to only delete the
Backup release files that are NOT part of the new System
release, and remotely get only those files needed to complete
the new System release.
Sets to this OID will have no effect if the SRM system is busy."
::= { adTaSysCtrlSysRlsMgmt 14 }
adTaSysCtrlSrmDownloadRetries OBJECT-TYPE
SYNTAX INTEGER (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID instructs the System Release Manager how many times it
should attempt to Download files to the Backup system release after
the first download has failed. Sets to this OID will have no effect if
the SRM system is busy."
::= { adTaSysCtrlSysRlsMgmt 15 }
adTaSysCtrlSrmDownloadFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DownloadFilename OID specifies the Release filename to
be retrieved by the System Release Manager system. This
release file contains information such as module part number,
firmware filename, and firmware file details that are necessary
to perform System Release Manager operations.
The Filename may not contain spaces, quotes, path info, or other
unusual characters that would generally be considered invalid in
a filename specification.
Sets to this OID will have no effect if the SRM system is busy."
::= { adTaSysCtrlSysRlsMgmt 16 }
adTaSysCtrlSrmDownloadBasepath OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DownloadBasepath OID allows the customer to specify a
directory prefix where the SRM release and firmware files
will be located on the server. It is assumed that the SRM
release and firmware files will be located in the same directory.
The Basepath argument may not contain spaces, commas,
quotes, or other unusual characters that would generally
be considered invalid in a path specification. Although
the Controller does not interpret the contents of this string,
please keep in mind that different operating systems have
different rules concerning what constitutes valid
characters and path/file separators.
Sets to this OID will have no effect if the SRM system is busy."
::= { adTaSysCtrlSysRlsMgmt 17 }
adTaSysCtrlSrmScheduledDownload OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ScheduledDownload OID allows the customer to specify a
date and time that the SRM will start a download to the
Backup System Release.
The specified time must be greater than 1 minute, but no more
than 90 days from the controller's current time.
The date and time has the following format: MM/DD/YY HH:MM"
::= { adTaSysCtrlSysRlsMgmt 18 }
adTaSysCtrlSrmScheduledActivate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ScheduledActivate OID allows the customer to specify a
date and time that SRM will make the Backup System Release
the Active System Release.
The specified time must be greater than 1 minute, but no more
than 90 days from the controller's current time.
The date and time has the following format: MM/DD/YY HH:MM"
::= { adTaSysCtrlSysRlsMgmt 19 }
adTaSysCtrlSrmValidateInterval OBJECT-TYPE
SYNTAX INTEGER (0..365)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID instructs the System Release Manager how often, in days, it
should check that a complete Active and/or Backup release is still
valid. A value of 0 indicates interval checks should not be performed,
and the validate checks performed at startup and after a Download or
Backup are sufficient."
::= { adTaSysCtrlSysRlsMgmt 20 }
adTaSysCtrlSrmStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This OID will return a formatted string describing the current
status and progress of the SRM operations.
Refer to the ''System Release Manager Feature'' user guide for
details."
::= { adTaSysCtrlSysRlsMgmt 21 }
adTaSysCtrlSrmAutoUpgradeCtrl OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable SRM's control of Auto Upgrade.
This option is enabled by default for controllers that support SRM.
Enabling Auto Upgrade control forces Auto Upgrade to retrieve the
system release package from the Flash File System.
Disabling Auto Upgrade control instructs the Auto Upgrade system
to retrieve files based off of the Auto Upgrade provisioned settings."
::= { adTaSysCtrlSysRlsMgmt 22 }
--
-- AutoUpgrade OIDs
--
adTaSysCtrlAutoUpgradeActiveSlots OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return information regarding active AutoUpgrades.
The format is a(b,b,b) where a is the number of slots currently
upgrading, and b is a comma separated list of zero or more SNMP
slots being upgraded, which may be truncated if the set is very
large"
::= { adTaSysCtrlAutoUpgrade 1 }
adTaSysCtrlAutoUpgradeErrorSlots OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return information regarding slots with AutoUpgrade errors.
The format is a(b,b,b) where a is the number of slots that
are currently in an AutoUpgrade error-state, and b is a comma
separated list of zero or more SNMP slots in an AutoUpgrade error
state, which may be truncated if the set is very large"
::= { adTaSysCtrlAutoUpgrade 2 }
adTaSysCtrlAutoUpgradeNeededSlots OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return information regarding the number of slots needing upgrade.
The format is a(b,b,b) where a is the number of slots needing
upgrade, and b is a comma separated list of zero or more SNMP
slots that need upgrade, which may be truncated if the set is
very large"
::= { adTaSysCtrlAutoUpgrade 3 }
adTaSysCtrlAutoUpgradeDeferredResetSlots OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return information regarding slots that AutoUpgrade has deferred
module reset following upgrade in conjunction with System
Controlled Reset (SCR). The format is a(b,b,b) where a is the
number of slots where reset has been deferred, and b is a comma
separated list of zero or more SNMP slots that AutoUpgrade has
deferred reset, which may be truncated if the set is very large"
::= { adTaSysCtrlAutoUpgrade 4 }
adTaSysCtrlAutoUpgradeActiveSlotsBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only OID will return a bitmap of slots currently upgrading.
This is an ascending sequence of bits where the LSB (Least
Significant Bit) of the first byte corresponds to slot 1,
the LSB of the second byte corresponds to slot 9, with
ascending slot numbers being represented until the last
byte. In general, only the bytes required to convey all
the 1 bits will actually be sent, all remaining unsent
bytes are implied to contain only 0s. At least one
byte will be sent.
A bit value of 1 indicates a card is currently upgrading."
::= { adTaSysCtrlAutoUpgrade 5 }
adTaSysCtrlAutoUpgradeErrorSlotsBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only OID will return a bitmap of slots having an
AutoUpgrade eror status.
This is an ascending sequence of bits where the LSB (Least
Significant Bit) of the first byte corresponds to slot 1,
the LSB of the second byte corresponds to slot 9, with
ascending slot numbers being represented until the last
byte. In general, only the bytes required to convey all
the 1 bits will actually be sent, all remaining unsent
bytes are implied to contain only 0s. At least one
byte will be sent.
A bit value of 1 indicates a card has an AutoUpgrade error status."
::= { adTaSysCtrlAutoUpgrade 6 }
adTaSysCtrlAutoUpgradeNeededSlotsBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only OID will return a bitmap of slots needing upgrade.
This is an ascending sequence of bits where the LSB (Least
Significant Bit) of the first byte corresponds to slot 1,
the LSB of the second byte corresponds to slot 9, with
ascending slot numbers being represented until the last
byte. In general, only the bytes required to convey all
the 1 bits will actually be sent, all remaining unsent
bytes are implied to contain only 0s. At least one
byte will be sent.
A bit value of 1 indicates a card needs upgrade."
::= { adTaSysCtrlAutoUpgrade 7 }
adTaSysCtrlAutoUpgradeDeferResetSlotsBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only OID will return a bitmap of slots whose post-
upgrade reset has been deferred for System Controlled Reboot.
This is an ascending sequence of bits where the LSB (Least
Significant Bit) of the first byte corresponds to slot 1,
the LSB of the second byte corresponds to slot 9, with
ascending slot numbers being represented until the last
byte. In general, only the bytes required to convey all
the 1 bits will actually be sent, all remaining unsent
bytes are implied to contain only 0s. At least one
byte will be sent.
A bit value of 1 indicates reset has been deferred for that slot."
::= { adTaSysCtrlAutoUpgrade 8 }
adTaSysCtrlAutoUpgradeUseSCR OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls AutoUpgrades use of the System Controlled Reboot (SCR) system.
If set to yes, module reboot will be deferred until later, based upon SCR
settings."
::= { adTaSysCtrlAutoUpgrade 10 }
adTaSysCtrlAutoUpgradeSCRStatus OBJECT-TYPE
SYNTAX INTEGER {
nonePending(1),
readyForSCR(2),
scrBusy(3),
auNeeded(4),
auBusy(5),
auErrors(6),
auNotUsingSCR(7),
noneWaitingForSCR(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns an enum indicating readiness to perform SCR with repect to the
AutoUpgrade system. The SCR system will ignore all initiate requests
unless the current value of adTaSysCtrlAutoUpgradeSCRStatus is ReadyForSCR."
::= { adTaSysCtrlAutoUpgrade 12 }
adTaSysCtrlAutoUpgradeEOSSCapable OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether EOSS (End Of Software Support) information is present and
valid in this software build."
::= { adTaSysCtrlAutoUpgrade 30 }
adTaSysCtrlAutoUpgradeEOSSWarnSlotsBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only OID will return a bitmap of slots with an
active EOSS (End Of Software Support) Warning status.
This is an ascending sequence of bits where the LSB (Least
Significant Bit) of the first byte corresponds to slot 1,
the LSB of the second byte corresponds to slot 9, with
ascending slot numbers being represented until the last
byte. In general, only the bytes required to convey all
the 1 bits will actually be sent, all remaining unsent
bytes are implied to contain only 0s. At least one
byte will be sent.
A bit value of 1 indicates an active EOSS Warning status
for this slot."
::= { adTaSysCtrlAutoUpgrade 32 }
adTaSysCtrlAutoUpgradeEOSSDenySlotsBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only OID will return a bitmap of slots with an
active EOSS (End Of Software Support) Denied status.
This is an ascending sequence of bits where the LSB (Least
Significant Bit) of the first byte corresponds to slot 1,
the LSB of the second byte corresponds to slot 9, with
ascending slot numbers being represented until the last
byte. In general, only the bytes required to convey all
the 1 bits will actually be sent, all remaining unsent
bytes are implied to contain only 0s. At least one
byte will be sent.
A bit value of 1 indicates an active EOSS Denied status
for this slot."
::= { adTaSysCtrlAutoUpgrade 34 }
--
-- System Controlled Reboot (SCR) OIDs
--
adTaSysCtrlRebootOperMode OBJECT-TYPE
SYNTAX INTEGER { auto(1), manual(2), scheduled(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SCR Operating mode."
::= { adTaSysCtrlReboot 1 }
adTaSysCtrlRebootSchedDateTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Future date/time to perform a scheduled SCR operation if SCR
OperMode is set to scheduled, otherwise this value is ignored.
Typical format of date/time strings are:
7/4/8 (date only, short 2008 year, 00:00:00 HRS)
7/4/2008 (date only, full 2008 year, 00:00:00 HRS)
8:15 (current date, 8:15:00 HRS)
8:15:5 (current date, 8:15:05 HRS)
7/4/2008 8:15 (7/4/2008 08:15:00)
7/4/8 08:15:05 (7/4/2008 08:15:05)
Setting this provision to an empty string is valid and indicates a
scheduled SCR operation should not be performed even if SCR OperMode
has a value of scheduled. This string will be reformatted by the
controller to reflect a full and correct date/time value. For
example, if only the time is supplied, the current date will be
inserted into the string in order to form a complete date/time
specification."
::= { adTaSysCtrlReboot 2 }
adTaSysCtrlRebootInitiate OBJECT-TYPE
SYNTAX INTEGER { initiateSCR(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID instructs the System Controlled Reboot (SCR) subsystem
to reboot all modules in the sstem if any post-AutoUpgrade reboots have
been deferred. This is NOT a general system reset operation, which would
constitude a serious Denial Of Service vulnerability. The SCR system
will ignore all initiate requests unless the current value of
adTaSysCtrlAutoUpgradeSCRStatus is ReadyForSCR."
::= { adTaSysCtrlReboot 3 }
adTaSysCtrlRebootLastStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the last SCR status string. Error statuses are persistent.
This string generally begin with a single-word state such as Idle, Busy, Error,
and are optionally followed with a short error explanation."
::= { adTaSysCtrlReboot 4 }
adTaSysCtrlRebootArmedStatus OBJECT-TYPE
SYNTAX INTEGER { armed(1), notArmed(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Returns the Armed Status of the SCR one-shot. Setting the value to armed will
change the status to armed. Currently, setting the value to notArmed will return
an error. In the future, setting the value to notArmed could change the status
to notArmed."
::= { adTaSysCtrlReboot 5 }
adTaSysCtrlRebootMode OBJECT-TYPE
SYNTAX INTEGER { concurrentMode(1), redundancyMode(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SCR reboot mode. concurrentMode will reboot cards in concurrent order, without considering redundancy status.
redundancyMode will reboot cards in concurrent order, but also take into account redundancy status: reboot offline
and non-redundant cards in the first pass, wait for all rebooted cards to come back up, then reboot online cards
in the second pass. The default value is concurrentMode."
DEFVAL { concurrentMode }
::= { adTaSysCtrlReboot 6 }
--
-- Alarm Severity
--
adTASysCtrlAlarmSeverityLevel OBJECT-TYPE
SYNTAX INTEGER {
none(1),
info(2),
alert(3),
minor(4),
major(5),
critical(6)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The highest active alarm severity level. Deprecated, please use adTaAlarmMasterSeverityLevel."
::= { adTaSysCtrlShelf 4 }
adTASysConfigurationChangeTimer OBJECT-TYPE
SYNTAX INTEGER (0..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frequency an alarm will be sent if a change occurs on the system."
::= { adTaSysCtrlShelf 6 }
adTASysLastConfigChangeAlarmTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time the alarm was generated."
::= { adTaSysCtrlShelf 8 }
-- ********************************************************************************
--
-- File Export adTaSysCtrlFileExport - adTaSysCtrlGeneralFileExport - adTaSysCtrlSystemLog
--
adTASystemEventLogAutoExportMode OBJECT-TYPE
SYNTAX INTEGER {
autoExportAt90PercentFull(1), -- Export when the System Log is 90 percent full
autoExportAtScheduledTime(2), -- Export at the specified time
autoExportDisabled(3) -- Auto export is disabled.
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System log auto export mode.."
::= { adTaSysCtrlSystemLog 1 }
adTaSystemEventLogPreventFileOverlap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1), -- enable feature to prevent file overlap
disabled(2) -- disabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Prevent sending an event in the system log more than once."
::= { adTaSysCtrlSystemLog 3 }
adTaSystemEventLogFilePrefix OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The prefix added to make the system log file name."
::= { adTaSysCtrlSystemLog 5 }
adTaSystemEventLogFileSuffix OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The suffix added to make the system log file name."
::= { adTaSysCtrlSystemLog 7 }
adTaSystemEventLogRemoteDirectory OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote directory on the severe where the system log file
is exported to."
::= { adTaSysCtrlSystemLog 9 }
adTaSystemEventLogRemoteFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote file name on the severe where the system log file
is exported to."
::= { adTaSysCtrlSystemLog 11 }
adTaSystemEventLogAutoExportNumberOfDays OBJECT-TYPE
SYNTAX INTEGER (0..90)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of days before the system log is exported. (Military Time/24 hour time)"
::= { adTaSysCtrlSystemLog 13 }
adTaSystemEventLogHourOfDayToExportSysLog OBJECT-TYPE
SYNTAX INTEGER (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hour of the day to export system Log."
::= { adTaSysCtrlSystemLog 15 }
adTaSystemEventLogMinuteOfDayToExportSysLog OBJECT-TYPE
SYNTAX INTEGER (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hour of the day to export system Log."
::= { adTaSysCtrlSystemLog 17 }
adTaSystemEventLogExportRetries OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of retries to export system event log."
::= { adTaSysCtrlSystemLog 19 }
adTaSystemEventLogRemotetHost OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The remote file Host.
This OID is deprecated. Use adTaSystemEventLogRemotetHostInetAddress
to set IPv4 and IPv6 address."
::= { adTaSysCtrlSystemLog 21 }
adTaSystemEventLogPrevExportTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last system log export."
::= { adTaSysCtrlSystemLog 23 }
adTaSystemEventLogPrevExportStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The previous export status."
::= { adTaSysCtrlSystemLog 25 }
adTaSystemEventLogNextAutoExportScheduled OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The information about the next system log auto export."
::= { adTaSysCtrlSystemLog 27 }
adTaSystemEventLogManualExport OBJECT-TYPE
SYNTAX INTEGER {
exportFullSystemLog(1), -- Export full system log
exportUnsentEvents(2) -- Export all events that have not been exported
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Manual export of system log."
::= { adTaSysCtrlSystemLog 29 }
adTaSystemEventLogCurrentStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current export status."
::= { adTaSysCtrlSystemLog 31 }
adTaSystemEventLogRemotetHostInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote file Host address type (Ipv6 or Ipv4)."
::= { adTaSysCtrlSystemLog 32 }
adTaSystemEventLogRemotetHostInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote file Host address (Ipv6 or Ipv4).
Backwards compatibility: Setting this address to a IPv4
address will update adTaSystemEventLogRemotetHost provision address
with the new value.
Setting this address to an IPV6 will leave adTaSystemEventLogRemotetHost as is."
::= { adTaSysCtrlSystemLog 33 }
-- ***********************************************************
adTaGenExportRemotetHost OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The remote file name.
This OID is deprecated. Use adTaGenExportRemotetHostInetAddress to
set IPv4 and IPv6 address."
::= { adTaSysCtrlGeneralFileExport 1 }
adTaGeneralExportRemoteHostMethod OBJECT-TYPE
SYNTAX INTEGER {
ftmTFTP(1),
ftmFTOT(2),
ftmFTP(3),
ftmSFTP(4),
ftmLFFS(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"File transfer method to use to transfer General Export files from the controller.
ftmTFTP(1) indicates TFTP transfer protocol.
ftmFTOT(2) indicates FTOT transfer protocol.
ftmFTP(3) indicates FTP transfer protocol.
ftmSFTP(4) indicates SFTP transfer protocol.
ftmLFFS(5) indicates Local Flash File System for OPTI-6100 SCM2 only."
::= { adTaSysCtrlGeneralFileExport 2 }
adTaGenExportRemoteFilePath OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote file name on the severe where the system log file
is exported to."
::= { adTaSysCtrlGeneralFileExport 3 }
adTaGenExportStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The previous export status."
::= { adTaSysCtrlGeneralFileExport 5 }
adTaGenExportFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last file exported."
::= { adTaSysCtrlGeneralFileExport 7 }
adTaGeneralExportRetries OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of retries to export file."
::= { adTaSysCtrlGeneralFileExport 9 }
adTaGenExportPrefixString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A prefix to add to the General File Export file name received by the line card."
::= { adTaSysCtrlGeneralFileExport 11 }
adTaGenExportSuffixString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A suffix to add to the General File Export file name received by the line card."
::= { adTaSysCtrlGeneralFileExport 12 }
adTaGenExportExceptionReportEnable OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable automatically generated exception reports. Manually generated reports are always enabled."
::= { adTaSysCtrlGeneralFileExport 14 }
adTaGenExportRemotetHostInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote file server address InetAddress Type."
::= { adTaSysCtrlGeneralFileExport 15 }
adTaGenExportRemotetHostInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The general export remote file Sever address.
Backwards compatibility: Setting this address to a IPv4
address will update adTaGenExportRemotetHost provision address
with the new value.
Setting this address to an IPV6 will leave adTaGenExportRemotetHost as is."
::= { adTaSysCtrlGeneralFileExport 16 }
-- ************************************************************************************
adTaSntpServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote SNTP Server."
::= { adTaSysCtrlSNTP 1 }
adTaDSTAutomaticAdjustment OBJECT-TYPE
SYNTAX INTEGER {
disabled(1), -- SNTP DST disabled
enabled(2), -- SNTP DST enabled
pre2007Adjustment(3) -- SNTP DST enable Pre 2007,
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This option sets automatic adjustment for North American daylight saving
time. Available values are Enabled and Disabled. The default value is
Enabled."
::= { adTaSysCtrlSNTP 3 }
adTaLocalTimeZone OBJECT-TYPE
SYNTAX INTEGER {
hawaii(1), -- SNTP TIMEZONE HAWAII
alaska(2), -- SNTP TIMEZONE ALASKA,
pacific(3), -- SNTP TIMEZONE PACIFIC,
mountain(4), -- SNTP TIMEZONE MOUNTAIN,
central(5), -- SNTP TIMEZONE CENTRAL,
eastern(6), -- SNTP TIMEZONE EASTERN,
atlantic(7) -- SNTP TIMEZONE ATLANTIC,
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This option sets the time zone in which the MX2800 unit is located.
Possible values consist of North American time zones from Hawaii-Aleutian
Standard Time to Atlantic Standard Time. The default value is Eastern
Standard Time."
::= { adTaSysCtrlSNTP 5 }
adTaRefreshPeriod OBJECT-TYPE
SYNTAX INTEGER {
oneMinute(1),
fiveMinute(2),
tenMinute(3),
fifteenMinute(4),
twentyMinute(5),
twentyFiveMinute(6),
thirtyMinute(7),
thirtyFiveMinute(8),
fortyMinute(9),
fortyFiveMinute(10),
fiftyMinute(11),
fiftyFiveMinute(12),
sixtyMinute(13)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This option sets the length of time between queries to the server.
The available values range from 1 minute to 60 minutes at 5-minute
increments. The default value is 5 minutes."
::= { adTaSysCtrlSNTP 7 }
adTaTimeProtocolState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1), -- sntp mode disabled,
sntp(2), -- sntp
netTime(3) -- Net Time
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This option sets the mode or protocol used to retrieve
the date and time from the server. Possible values are
Disabled, SNTP, and Net Time. When the State option is
set to Disabled, then the user should explicitly set
the date and time locally (via menus, TL1, or SNMP).
If the State option is set to SNTP or Net Time, then
the product prevents any attempt to set the time
locally. The default value is Disabled."
::= { adTaSysCtrlSNTP 9 }
adTaSntpOperationStaus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNTP operations status."
::= { adTaSysCtrlSNTP 11 }
adTaSntpTimeOutCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running time out count of SNTP Server1. This count is reset
to zero if the server is changed."
::= { adTaSysCtrlSNTP 13 }
adTaSntpGMTtimeZoneString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID will set the Time Zone Offset. This setting
will override the adTaLocalTimeZoneGMToffset OID in the Controller.
**
Format: (GMT[+,-][00-23]:[00-59])Time Zone Name/Alias/Description.
Time Zone Name 0 - 55 characters.
**
Example:(GMT-06:00)Central Time
Example:(GMT-00:00) No Offset
Example:(GMT+00:00) Greenwich Mean Time : London
Example:(GMT+00:00) Greenwich Mean Time : London
Example:(GMT+02:00) Amman
Example:(GMT-04:30) Caracas
Example:(GMT+04:45) Kathmandu
"
::= { adTaSysCtrlSNTP 15 }
adTaSntpServer2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote SNTP redundant Server 2."
::= { adTaSysCtrlSNTP 17 }
adTaSntpServer3 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote SNTP redundant Server 3."
::= { adTaSysCtrlSNTP 18 }
adTaSntpServer4 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote SNTP redundant Server 4."
::= { adTaSysCtrlSNTP 19 }
adTaSntpTimeOutProv OBJECT-TYPE
SYNTAX Integer32 (0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP wait time before it times out.
The number of seconds before SNTP message time out."
::= { adTaSysCtrlSNTP 21 }
adTaSntpTimeRetryProv OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP retry. The number of times to retry a SNTP request each server.
to a SNTP server."
::= { adTaSysCtrlSNTP 23 }
adTaSntpTimeOutCountServer2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running time out count of SNTP Server2. This count is reset
to zero if the server is changed."
::= { adTaSysCtrlSNTP 25 }
adTaSntpTimeOutCountServer3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running time out count of SNTP Server3. This count is reset
to zero if the server is changed."
::= { adTaSysCtrlSNTP 26 }
adTaSntpTimeOutCountServer4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running time out count of SNTP Server4. This count is reset
to zero if the server is changed."
::= { adTaSysCtrlSNTP 27 }
adTaSntpCurrentServer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current server being used. Server 1 to 4."
::= { adTaSysCtrlSNTP 29 }
-- ********************************************************************************
--
-- syslog Protocol
-- In its most simplistic terms, the syslog protocol provides a
-- transport to allow a machine to send event notification messages
-- across IP networks to event message collectors - also known as syslog
-- servers.
--
adTaSysLogServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The remote SysLog Server.
This OID is deprecated for support of IPv6. Use adTaSysLogServerNetAddress."
::= { adTaSysLog 1 }
adTaSysLogServer2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The second remote SysLog Server."
::= { adTaSysLog 2 }
adTaSysLogMode OBJECT-TYPE
SYNTAX INTEGER {
enableSysLog(1), -- syslog mode enabled
disableSysLog(2) -- syslog mode disabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or Disable SysLog feature."
::= { adTaSysLog 3}
-- Send system event log events on the controller to RFC 3164 syslog clients
adTaExportCtrlToSysLog OBJECT-TYPE
SYNTAX INTEGER {
exportSystemEventToSyslogServer(1) -- send System Event Log Entries to SysLog
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send the system event log entries to syslog client (RFC 3164 syslog clients)."
::= { adTaSysLog 4}
adTaSysLogServer3 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The third remote SysLog Server 3."
::= { adTaSysLog 6 }
adTaSysLogServer4 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The fourth remote SysLog Server."
::= { adTaSysLog 7 }
--
-- the adTaSysLogServer Translation table
--
adTaSysLogServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdTaSysLogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Remote SysLog Server Table"
::= { adTaSysLog 10 }
adTaSysLogServerEntry OBJECT-TYPE
SYNTAX AdTaSysLogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one Remote SysLog Server."
INDEX { adTaSysLogServerIndex}
::= { adTaSysLogServerTable 1 }
AdTaSysLogServerEntry ::= SEQUENCE {
adTaSysLogServerIndex Integer32,
adTaSysLogServerAddressType InetAddressType,
adTaSysLogServerInetAddress InetAddress
}
adTaSysLogServerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value that uniquely identifies Remote SysLog Server 1 to 4"
::= { adTaSysLogServerEntry 1 }
adTaSysLogServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of adTaSysLogServerInetAddress."
::= { adTaSysLogServerEntry 2 }
adTaSysLogServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote SysLog Server address."
::= { adTaSysLogServerEntry 3 }
-- ***********************************************************************************
--
-- TA System Controller DHCP Server Configuration
--
--
adTaDhcpNetworkInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ifIndex of the Controller Ethernet interface that the DHCP server runs on."
::= { adTaDhcpServer 10}
adTaDhcpSubNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Netmask of the DHCP interface address.
A subnet mask defines how many bits of an IP address to use for the
network/subnet ID and how many bits to use for the Host ID."
::= { adTaDhcpServer 12}
adTaDhcpSubNetLength OBJECT-TYPE
SYNTAX INTEGER (24..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask by length. See adTaDhcpSubNetMask."
::= { adTaDhcpServer 14}
adTaDhcpStartIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send the system event log entries to syslog client (RFC 3164 syslog clients)."
::= { adTaDhcpServer 16}
adTaDhcpEndIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send the system event log entries to syslog client (RFC 3164 syslog clients)."
::= { adTaDhcpServer 18}
adTaDhcpSubNetAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A subnet IP Address."
::= { adTaDhcpServer 20}
adTaDhcpLeasDurationHours OBJECT-TYPE
SYNTAX INTEGER (0..24)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP lease duration hours. If hours and minutes are set to zero
the DHCP lease duration will be set to one hour. The minimum
lease duration will be 300 seconds."
::= { adTaDhcpServer 22}
adTaDhcpLeasDurationMintues OBJECT-TYPE
SYNTAX INTEGER (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP lease duration minutes. If hours and minutes are set to zero
the DHCP lease duration will be set to one hour. The minimum
lease duration will be 300 seconds."
::= { adTaDhcpServer 24}
adTaDhcpServerCommands OBJECT-TYPE
SYNTAX INTEGER
{
startDhcpServer(1),
stopDhcpServer(2),
dhcpNoCommand(999)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Server command.
startDhcpServer - restart DHCP server.
Only if the server was stoped.
stopDhcpServer - Stop the DhcpServer if it is running.
dhcpNoCommand - no Command was performed performed."
::= { adTaDhcpServer 26}
adTaDhcpServerOperationStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DHCP server status."
::= { adTaDhcpServer 28}
-- DHCP status Table
adTaDhcpServerStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdTaDhcpServerStatusTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { adTaDhcpServer 40 }
adTaDhcpServerStatusTableEntry OBJECT-TYPE
SYNTAX AdTaDhcpServerStatusTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { adTaSysCtrlSrmReleaseIndex,
adTaSysCtrlSrmRlsFilesIndex }
::= { adTaDhcpServerStatusTable 1 }
AdTaDhcpServerStatusTableEntry ::=
SEQUENCE {
adTaDhcpServerStatusIndex
Integer32,
adTaDhcpServerStatus
DisplayString
}
adTaDhcpServerStatusIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for a DHCP Server Status."
::= { adTaDhcpServerStatusTableEntry 1 }
adTaDhcpServerStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..200))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dhcp Server Status."
::= { adTaDhcpServerStatusTableEntry 4}
-- ***********************************************************************************
adTaSSLKeySizeBits OBJECT-TYPE
SYNTAX INTEGER
{
bits512(512),
bits1024(1024),
bits2048(2048)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the key size in bits. If not specified then
1024 is used."
::= { adTaSSLConfiguration 5}
adTaSSLKeyType OBJECT-TYPE
SYNTAX INTEGER
{
rsa(1),
dsa(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL key type to generate and use."
::= { adTaSSLConfiguration 7}
adTaSSLInputPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(4..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The passwords for the input private key file."
::= { adTaSSLConfiguration 9}
adTaSSLOutputPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(4..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The passwords for the output private key file."
::= { adTaSSLConfiguration 11}
adTaSSLCertificateCountry OBJECT-TYPE
SYNTAX DisplayString (SIZE(2..2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL certificate country."
::= { adTaSSLConfiguration 13}
adTaSSLCertificateStateOrProvince OBJECT-TYPE
SYNTAX DisplayString (SIZE(2..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL certificate State or Province."
::= { adTaSSLConfiguration 15}
adTaSSLCertificateChallengePassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(4..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL challenge password."
::= { adTaSSLConfiguration 17}
adTaSSLCertificateLocality OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL certificate Locality (eg, city)."
::= { adTaSSLConfiguration 19}
adTaSSLCertificateOrganization OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL certificate Organization."
::= { adTaSSLConfiguration 21}
adTaSSLCertificateOrganizationalUnitName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL certificate Organization Unit Name."
::= { adTaSSLConfiguration 23}
adTaSSLCertificateCommonName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL Common Name (e.g., fully qualified domain name of
the server to be secured)'' since, the common name
generally corresponds to the server's name when
generating certificates."
::= { adTaSSLConfiguration 25}
adTaSSLCertificateEmailAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL Email address of the SSL certificate distinguished
name"
::= { adTaSSLConfiguration 27}
adTaGenerateNewSSLKeys OBJECT-TYPE
SYNTAX INTEGER
{
generateNewSSLKeys(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the controller and genrerate new SSL keys using
the current settings."
::= { adTaSSLConfiguration 29}
adTaGenerateNewSSLCertificateRequest OBJECT-TYPE
SYNTAX INTEGER
{
generateNewSSLCertRequest(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Initiate generation of a new SSL Certificate Request."
::= { adTaSSLConfiguration 30}
adTaSSLuseImportCertificate OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to disable, the controller will use the self-signed certificate. When set to
enable, the controller will use the imported signed certificate (if available).
Changing this setting will intiate a controller reboot."
::= { adTaSSLConfiguration 31}
-- ***********************************************
adTaSSLRemotePrivateKeyFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL Remote Private key file name to download. This file
will replace the controller generated SSL Private Key File."
::= { adTaSSLRemoteKeyDownload 3}
adTaSSLRemotedPublicKeyFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL Remote Private key file name to download. This file
will replace the controller generated SSL Public Key File."
::= { adTaSSLRemoteKeyDownload 5}
adTaSSLRemoteCertificateFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL Remote Private key file name to download. This file
will replace the controller generated SSL self signed
Certificate Key File."
::= { adTaSSLRemoteKeyDownload 7}
adTaSSLRemoteKeysDownLoadStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL Remote keys download status."
::= { adTaSSLRemoteKeyDownload 8}
adTaSSLCertificateRequestFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"File name to use while exporting a certificate request."
::= { adTaSSLRemoteKeyDownload 9}
adTaSSLCertificateRequestExport OBJECT-TYPE
SYNTAX INTEGER
{
exportSSLCertificateRequest(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to initiate an certificate request export."
::= { adTaSSLRemoteKeyDownload 10}
adTaSSLCertificateImport OBJECT-TYPE
SYNTAX INTEGER
{
importSSLCertificate(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Initiate the import operation for the signed certificate.
The file indicated by adTaSSLRemoteCertificateFileName
will be transferred to the controller using the selected
designated file server, protocol, and credentials specified
in the controller provisioning."
::= { adTaSSLRemoteKeyDownload 11}
adTaSSLCertificateImportStatus OBJECT-TYPE
SYNTAX INTEGER
{
ready(1),
notReady(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSL Certificate Import status. This status indicates whether or not a
certificate was imported successfully and is ready to be used, if desired."
::= { adTaSSLRemoteKeyDownload 12}
adTaSSLDownLoadRemoteKeys OBJECT-TYPE
SYNTAX INTEGER
{
downloadRemoteSSLKeys(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL key type to generate and use."
::= { adTaSSLRemoteKeyDownload 13}
adTaSSLCertificateSigningRequestStatus OBJECT-TYPE
SYNTAX INTEGER
{
ready(1),
notReady(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSL Certificate Signing Request Status. This status Indicates
whether a certificate signing request is ready and available
for export."
::= { adTaSSLRemoteKeyDownload 14}
adTaSSLCertificateSignRequestExportStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This OID will return a formatted string describing the most recent
SSL Certificate Signing Request Remote File Export operation
status."
::= { adTaSSLRemoteKeyDownload 15}
adTaSSLSignedCertificateImportStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This OID will return a formatted string describing the most recent
SSL Signed Certificate Remote File Import operation status."
::= { adTaSSLRemoteKeyDownload 16}
--
-- Inband management VLAN bridging
--
adTaSysCtrlVLANBridgeMode OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable VLAN bridging mode."
::= { adTaSysCtrlVLANBridge 1 }
adTaSysCtrlVLANBridgeInterface OBJECT-TYPE
SYNTAX INTEGER { enet(1), enet2(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select the interface to perform bridging."
::= { adTaSysCtrlVLANBridge 2 }
-- ***********************************************************************************
--
-- TA System Module Reset Control
--
-- Operating Instructions:
--
-- 0. We recommended that you first confirm all modules have been fully
-- discovered and are stable by querying the standard GenSlot oids
-- for every module in the system.
--
-- 1. Confirm the ModuleReset subsystem is in an idle/error state by
-- reading the 'adTaModuleResetCtrl' oid.
--
-- 2. Write the 'RESERVE' (549) command to 'adTaModuleResetCtrl' oid.
--
-- 3. Confirm 'RESERVED' (1) state by reading 'adTaModuleResetCtrl' oid.
--
-- 4. Write the SNMP slot number to be reset to 'adTaModuleResetSlot'.
-- Note: 0 = reset all modules EXCEPT the controller.
-- -1 = reset all modules AND the controller.
--
-- 5. Confirm the 'ARMED' (3) state by reading 'adTaModuleResetCtrl' oid
-- Note: may return 'BUSY' (2) for several seconds while we scan
-- modules to determine capability/state.
-- Note: operation may abort with 'NOT_SUPPORTED' (101) if we are
-- told to reset a single module that does not support the
-- RESET-DID or if any slot reports a BUSY state.
-- Note: An error status will be returned if an invalid slot number
-- is supplied or any other error condition is detected.
--
-- 6. Do not proceed to the next step until a read of
-- 'adTaModuleResetCtrl' returns the 'ARMED' (3) state.
--
-- 7. Write 'COMMIT' (666) command to 'adTaModuleResetCtrl' oid.
--
-- 8. Confirm 'RESETTING' (4) state by reading 'adTaModuleResetCtrl' oid.
--
-- Note: any deviation from this sequence may abort the entire operation and
-- return an 'ABORTED' (102) status to a 'adTaModuleResetCtrl' query.
--
-- Note: The I/O values for adTaModuleResetCtrl may be thought of an an enumerated
-- set. Since zero (0) is used, its not technically a valid SNMP V1 enum,
-- (it IS a valid SNMP V2 enum) so the values are represented as plain integers.
--
-- {
-- adTaModuleResetIdle(0),
-- adTaModuleResetReserved(1),
-- adTaModuleResetBusy(2),
-- adTaModuleResetArmed(3),
-- adTaModuleResetResetting(4),
--
-- adTaModuleResetErrors(100),
-- adTaModuleResetNotSupported(101),
-- adTaModuleResetAborted(102),
--
-- adTaModuleResetCommands(500),
-- adTaModuleResetReserve(549),
-- adTaModuleResetCommit(666)
-- }
--
-- ***********************************************************************************
adTaModuleResetSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP slot number of module to be reset, else 0 (zero) if all modules should
be reset except the controller, -1 if all modules should be reset including
controller. This OID must be used in conjunction with the adTaModuleResetCtrl
OID, refer to the above description for details."
::= { adTaModuleReset 10}
adTaModuleResetCtrl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID must be used in conjunction with the adTaModuleResetSlot
OID, refer to the above description for details."
::= { adTaModuleReset 12}
-- ***********************************************************************************
--
-- TA System Traps Varbinds
--
adTaDataLossDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Description of SCM data loss or coruption."
::= { adTaSysAlarmVarbinds 3}
-- ***********************************************************************************
--
-- TA System Controller Traps
--
adTaControllerMgmtTraps OBJECT IDENTIFIER ::= { adTaControllerMgmt 0 }
--
-- service state msg fail alarms
--
adTASetSingleServiceStateMsgFail NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adGenPortTrapIdentifier,
adGenSlotProdName
}
STATUS current
DESCRIPTION
"Set single service state msg fail."
--#TYPE "Warning - set single service state msg fail"
--#SUMMARY "adTaControllerMgmtTraps 1006301: set single service state msg failed at slot %d.;"
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS { 2,1}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Set Single Service State Msg Failure"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006301}
adTAGetSingleServiceStateMsgFail NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adGenPortTrapIdentifier,
adGenSlotProdName
}
STATUS current
DESCRIPTION
"Get single service state msg fail."
--#TYPE "Warning - get single service state msg fail"
--#SUMMARY "adTaControllerMgmtTraps 1006303: get single service state msg failed at slot %d.;"
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS { 2,1}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Get Single Service State Msg Failure"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006303}
adTASetAllServiceStateMsgFail NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adGenPortTrapIdentifier,
adGenSlotProdName
}
STATUS current
DESCRIPTION
"Set all service state msg fail."
--#TYPE "Warning - set all service state msg fail"
--#SUMMARY "adTaControllerMgmtTraps 1006305: set all service state msg failed at slot %d.;"
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS { 2,1}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Set all Service State Msg Failure"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006305}
adTAGetAllServiceStateMsgFail NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adGenPortTrapIdentifier,
adGenSlotProdName
}
STATUS current
DESCRIPTION
"Get all service state msg fail."
--#TYPE "Warning - get all service state msg fail"
--#SUMMARY "adTaControllerMgmtTraps 1006307: get all service state msg failed at slot %d."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS { 2,1}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Get all Service State Msg Failure"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006307}
--
-- relay test alarms
--
adTACriticalAudibleRelayTestClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Critical Audible Relay clear alarm."
--#TYPE "Warning - Alarm Relay Test. Toggle Critical Audible Relay Clear"
--#SUMMARY "adTaControllerMgmtTraps 1006308: Menu Toggle Critical Audible Relay Clear alarm."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006308}
adTACriticalAudibleRelayTestActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Critical Audible Relay active alarm."
--#TYPE "Warning - Alarm Relay Test. Toggle Critical Audible Relay active alarm"
--#SUMMARY "adTaControllerMgmtTraps 1006309: Menu Toggle Critical Audible Relay active alarm."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006309}
adTACriticalVisualRelayTestClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Critical Visual Relay clear alarm."
--#TYPE "Warning - Alarm Relay Test. Toggle Critical Visual Relay clear alarm"
--#SUMMARY "adTaControllerMgmtTraps 1006310: Menu Toggle Critical Visual Relay clear alarm."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006310}
adTACriticalVisualRelayTestActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Critical Visual Relay active alarm."
--#TYPE "Warning - Alarm Relay Test. Toggle Critical Visual Relay active alarm."
--#SUMMARY "adTaControllerMgmtTraps 1006311: Menu Alarm Relay Test. Toggle Critical Visual Relay active alarm."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adTaControllerMgmtTraps 1006311 }
adTAMajAudibleRelayTestClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Major Audible Relay alarm clear."
--#TYPE "Warning - Alarm Relay Test. Toggle Major Audible Relay alarm clear."
--#SUMMARY "adTaControllerMgmtTraps 1006312: Menu Alarm Relay Test. Toggle Major Audible Relay alarm clear."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY MAJOR
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006312}
adTAMajAudibleRelayTestActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Major Audible Relay alarm active."
--#TYPE "Warning - Alarm Relay Test. Toggle Major Audible Relay alarm active."
--#SUMMARY "adTaControllerMgmtTraps 1006313: Menu Alarm Relay Test. Toggle Major Audible Relay alarm active."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY MAJOR
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006313}
adTAMajVisualRelayTestClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Major Visual Relay alarm clear."
--#TYPE "Warning - Alarm Relay Test. Toggle Major Visual Relay alarm clear."
--#SUMMARY "adTaControllerMgmtTraps 1006314: Menu Alarm Relay Test. Toggle Major Visual Relay alarm clear."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY MAJOR
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006314}
adTAMajVisualRelayTestActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Major Visual Relay alarm active."
--#TYPE "Warning - Alarm Relay Test. Toggle Major Visual Relay alarm active."
--#SUMMARY "adTaControllerMgmtTraps 1006315: Menu Alarm Relay Test. Toggle Major Visual Relay alarm active."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY MAJOR
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006315}
adTAMinorAudibleRelayTestClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Minor Audible Relay alarm clear."
--#TYPE "Warning - Alarm Relay Test. Toggle Minor Audible Relay alarm clear."
--#SUMMARY "adTaControllerMgmtTraps 1006316: Menu Alarm Relay Test. Toggle Minor Audible Relay alarm clear."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY MINOR
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006316}
adTAMinorAudibleRelayTestActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Minor Audible Relay alarm active."
--#TYPE "Warning - Alarm Relay Test. Toggle Minor Audible Relay alarm active."
--#SUMMARY "adTaControllerMgmtTraps 1006317: Menu Alarm Relay Test. Toggle Minor Audible Relay alarm active."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY MINOR
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006317}
adTAMinorVisualRelayTestClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Minor Visual Relay alarm clear."
--#TYPE "Warning - Alarm Relay Test. Toggle Minor Visual Relay alarm clear."
--#SUMMARY "adTaControllerMgmtTraps 1006318: Menu Alarm Relay Test. Toggle Minor Visual Relay alarm clear."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY MINOR
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006318}
adTAMinorVisualRelayTestActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Minor Visual Relay alarm active active."
--#TYPE "Warning - Alarm Relay Test. Toggle Minor Visual Relay alarm active active."
--#SUMMARY "adTaControllerMgmtTraps 1006319: Menu Alarm Relay Test. Toggle Minor Visual Relay alarm active active."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY MINOR
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006319}
adTAAux1RelayTestClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm clear."
--#TYPE "Warning - Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm clear."
--#SUMMARY "adTaControllerMgmtTraps 1006320: Menu Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm clear."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006320}
adTAAux1RelayTestActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm active."
--#TYPE "Warning - Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm active."
--#SUMMARY "adTaControllerMgmtTraps 1006321: Menu Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm active."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006321}
adTAAux2RelayTestClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm clear."
--#TYPE "Warning - Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm clear."
--#SUMMARY "adTaControllerMgmtTraps 1006322: Menu Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm clear."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006322}
adTAAux2RelayTestActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName
}
STATUS current
DESCRIPTION
"Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm active."
--#TYPE "Warning - Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm active."
--#SUMMARY "adTaControllerMgmtTraps 1006323: Menu Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm active."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS {1}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Alarm Relay Test"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006323}
--
-- clei code alarms
--
adTACleiCodeMisMatchClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adGenSlotProdName,
adGenSlotProdCLEIcode
}
STATUS current
DESCRIPTION
"CLEI code mis-match clear"
--#TYPE "Warning - CLEI code mis-match"
--#SUMMARY "adTaControllerMgmtTraps 1006324: CLEI code mis-match clear at slot %d."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS { 2,1}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Card Insertion"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006324}
adTACleiCodeMisMatch NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adGenSlotProdName,
adGenSlotProdCLEIcode
}
STATUS current
DESCRIPTION
"CLEI code mis-match."
--#TYPE "Warning - CLEI code mis-match"
--#SUMMARY "adTaControllerMgmtTraps 1006325: CLEI code mis-match at slot %d."
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS { 2,1}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Card Insertion"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006325}
--
-- power shedding alarms
--
adTAPowerSheddingInputDeAsserted NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTASysCtrlPowerShedAlmInput,
adTASysCtrlPowerShedACFailAlarmDescription,
adTASysCtrlPowerShedACFailAlarmSeverity,
adTASysCtrlPowerShedCountDown
}
STATUS current
DESCRIPTION
"Power Shedding Input DeAsserted"
--#TYPE "Major - Power Shedding Input DeAsserted"
--#SUMMARY "adTaControllerMgmtTraps 1006328: Power Shedding Input DeAsserted"
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS { 1 }
--#SEVERITY MAJOR
--#GENERIC 6
--#CATEGORY "Power Shedding Input DeAsserted"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006328}
adTAPowerSheddingInputAsserted NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTASysCtrlPowerShedAlmInput,
adTASysCtrlPowerShedACFailAlarmDescription,
adTASysCtrlPowerShedACFailAlarmSeverity,
adTASysCtrlPowerShedCountDown
}
STATUS current
DESCRIPTION
"Power Shedding Input Asserted"
--#TYPE "Major - Power Shedding Input Asserted"
--#SUMMARY "adTaControllerMgmtTraps 1006329: Power Shedding Input Asserted"
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS { 1 }
--#SEVERITY MAJOR
--#GENERIC 6
--#CATEGORY "Power Shedding Input Asserted"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006329}
adTAPowerSheddingDeActivated NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTASysCtrlPowerShedAlmInput,
adTASysCtrlPowerShedStatus,
adTASysCtrlPowerShedStateAlarmSeverity
}
STATUS current
DESCRIPTION
"Power Shedding Currently Deactivated"
--#TYPE "Major - Power Shedding Deactivated"
--#SUMMARY "adTaControllerMgmtTraps 1006330: Power Shedding Deactivated"
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS { 1 }
--#SEVERITY MAJOR
--#GENERIC 6
--#CATEGORY "Power Shedding Deactivated"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006330}
adTAPowerSheddingActivated NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTASysCtrlPowerShedAlmInput,
adTASysCtrlPowerShedStatus,
adTASysCtrlPowerShedStateAlarmSeverity
}
STATUS current
DESCRIPTION
"Power Shedding Currently Activated"
--#TYPE "Major - Power Shedding Activated"
--#SUMMARY "adTaControllerMgmtTraps 1006331: Power Shedding Activated"
--#SUMMARY "detected at chassis: %s"
--#ARGUMENTS { 1 }
--#SEVERITY MAJOR
--#GENERIC 6
--#CATEGORY "Power Shedding Activated"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006331}
--
-- fan alarms
--
adTAFanMPowerAFailClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTAeSCUenvAlarmUserName,
adTAeSCUenvAlarmInputLevel
}
STATUS current
DESCRIPTION
"FANM Bus A Power Failure Alarm clear"
--#TYPE "Informational - FANM Bus A Power Failure Alarm clear"
--#SUMMARY "adTaControllerMgmtTraps 1006332: FANM Bus A Power Failure Alarm clear;"
--#SUMMARY "detected at shelf: %s"
--#ARGUMENTS { 1 }
--#SEVERITY MINOR
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006332}
adTAFanMPowerAFail NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTAeSCUenvAlarmUserName,
adTAeSCUenvAlarmInputLevel
}
STATUS current
DESCRIPTION
"FANM Bus A Power Failure Alarm active"
--#TYPE "Minor - FANM Bus A Power Failure Alarm active"
--#SUMMARY "adTaControllerMgmtTraps 1006333: FANM Bus A Power Failure Alarm active;"
--#SUMMARY "detected at shelf: %s"
--#ARGUMENTS { 1 }
--#SEVERITY MINOR
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006333}
adTAFanMPowerBFailClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTAeSCUenvAlarmUserName,
adTAeSCUenvAlarmInputLevel
}
STATUS current
DESCRIPTION
"FANM Bus B Power Failure Alarm clear"
--#TYPE "Informational - FANM Bus B Power Failure Alarm clear"
--#SUMMARY "adTaControllerMgmtTraps 1006334: FANM Bus B Power Failure Alarm clear;"
--#SUMMARY "detected at shelf: %s"
--#ARGUMENTS { 1 }
--#SEVERITY MINOR
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006334}
adTAFanMPowerBFail NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTAeSCUenvAlarmUserName,
adTAeSCUenvAlarmInputLevel
}
STATUS current
DESCRIPTION
"FANM Bus B Power Failure Alarm active"
--#TYPE "Minor - FANM Bus B Power Failure Alarm active"
--#SUMMARY "adTaControllerMgmtTraps 1006335: FANM Bus B Power Failure Alarm active;"
--#SUMMARY "detected at shelf: %s"
--#ARGUMENTS { 1 }
--#SEVERITY MINOR
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006335}
--
-- System Release Management Alarms
--
adTASrmActiveRlsErrorClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlSrmReleaseFilename,
adTaSysCtrlSrmReleaseStatus,
adTaSysCtrlSrmReleaseErrorBitmask
}
STATUS current
DESCRIPTION
"This trap is used to indicate that the previous
active system release error state has cleared."
--#TYPE "Warning - Active Release Error alarm clear."
--#SUMMARY "adTaControllerMgmtTraps 1006340: Active Release Error alarm clear for;"
--#SUMMARY "shelf: %s, release: %s, status: %s, error: %x"
--#ARGUMENTS { 1, 2, 3, 4 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006340}
adTASrmActiveRlsErrorActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlSrmReleaseFilename,
adTaSysCtrlSrmReleaseStatus,
adTaSysCtrlSrmReleaseErrorBitmask
}
STATUS current
DESCRIPTION
"This trap is used to indicate that the active system release has an error.
Walking the adTaSysCtrlSysRlsFilesTable will provide more detail for which
spacific files have an error."
--#TYPE "Warning - Active Release Error alarm active."
--#SUMMARY "adTaControllerMgmtTraps 1006341: Active Release Error alarm active for;"
--#SUMMARY "shelf: %s, release: %s, status: %s, error: %x"
--#ARGUMENTS { 1, 2, 3, 4 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006341}
adTASrmBackupRlsErrorClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlSrmReleaseFilename,
adTaSysCtrlSrmReleaseStatus,
adTaSysCtrlSrmReleaseErrorBitmask
}
STATUS current
DESCRIPTION
"This trap is used to indicate that the previous
backup system release error has cleared."
--#TYPE "Warning - Backup Release Error alarm clear."
--#SUMMARY "adTaControllerMgmtTraps 1006342: Backup Release Error alarm clear for;"
--#SUMMARY "shelf: %s, release: %s, status: %s, error: %x"
--#ARGUMENTS { 1, 2, 3, 4 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006342}
adTASrmBackupRlsErrorActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlSrmReleaseFilename,
adTaSysCtrlSrmReleaseStatus,
adTaSysCtrlSrmReleaseErrorBitmask
}
STATUS current
DESCRIPTION
"This trap is used to indicate that the backup system release has an error.
Walking the adTaSysCtrlSysRlsFilesTable will provide more detail for which
specific files have an error."
--#TYPE "Warning - Backup Release Error alarm active."
--#SUMMARY "adTaControllerMgmtTraps 1006343: Backup Release Error alarm active for;"
--#SUMMARY "shelf: %s, release: %s, status: %s, error: %d"
--#ARGUMENTS { 1, 2, 3, 4 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006343}
adTASrmNewActiveRelease NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlSrmReleaseFilename
}
STATUS current
DESCRIPTION
"This trap is used to indicate that there is a
new active system release, and the activate backup
system release operation has successfully completed."
--#TYPE "Warning - New Active System Release."
--#SUMMARY "adTaControllerMgmtTraps 1006344: New Active System Release;"
--#SUMMARY "shelf: %s, active release: %s"
--#ARGUMENTS { 1, 2 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006344}
adTASrmRlsDownloadStarted NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlSrmDownloadFilename
}
STATUS current
DESCRIPTION
"This trap is used to indicate that a system
release download operation has been started."
--#TYPE "Warning - System Release download operation started."
--#SUMMARY "adTaControllerMgmtTraps 1006346: System Release download operation started;"
--#SUMMARY "started at shelf: %s, release: %s"
--#ARGUMENTS { 1, 2 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006346}
adTASrmRlsDownloadCompleted NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlSrmDownloadFilename
}
STATUS current
DESCRIPTION
"This trap is used to indicate that a system
release download operation has successfully completed."
--#TYPE "Warning - System Release download operation has successfully completed."
--#SUMMARY "adTaControllerMgmtTraps 1006348: System Release download operation has successfully completed;"
--#SUMMARY "completed at shelf: %s, release: %s"
--#ARGUMENTS { 1, 2 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006348}
adTASrmRlsDownloadFailed NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlSrmDownloadFilename,
adTaSysCtrlSrmStatus
}
STATUS current
DESCRIPTION
"This trap is used to indicate that a system release
download operation has failed. The EMS should perform
a 'get' on the adTaSysCtrlSrmStatus OID for further
information regarding the error condition."
--#TYPE "Warning - System Release download operation has failed."
--#SUMMARY "adTaControllerMgmtTraps 1006350: System release download operation has failed;"
--#SUMMARY "failed at shelf: %s, release: %s, (%s)"
--#ARGUMENTS { 1, 2, 3 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006350}
adTASrmRlsBackupStarted NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlSrmReleaseFilename
}
STATUS current
DESCRIPTION
"This trap is used to indicate that an Active
system release backup operation has been started."
--#TYPE "Warning - Active Release backup operation started."
--#SUMMARY "adTaControllerMgmtTraps 1006352: Active Release backup operation started;"
--#SUMMARY "started at shelf: %s, release: %s"
--#ARGUMENTS { 1, 2 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006352}
adTASrmRlsBackupCompleted NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlSrmReleaseFilename
}
STATUS current
DESCRIPTION
"This trap is used to indicate that an Active system
release backup operation has successfully completed."
--#TYPE "Warning - Active Release backup operation has successfully completed."
--#SUMMARY "adTaControllerMgmtTraps 1006354: Active Release backup operation has successfully completed;"
--#SUMMARY "completed at shelf: %s, release: %s"
--#ARGUMENTS { 1, 2 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006354}
adTASrmRlsBackupFailed NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlSrmReleaseFilename,
adTaSysCtrlSrmStatus
}
STATUS current
DESCRIPTION
"This trap is used to indicate that an Active system
release backup operation has failed. The EMS should
perform a 'get' on the adTaSysCtrlSrmStatus OID for
further information regarding the error condition."
--#TYPE "Warning - Active Release backup operation has failed."
--#SUMMARY "adTaControllerMgmtTraps 1006356: Active Release backup operation has failed;"
--#SUMMARY "failed at shelf: %s, release: %s, (%s)"
--#ARGUMENTS { 1, 2, 3 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006356}
--
-- Alarm Severity
--
adTASysCtrlAlarmSeverityChanged NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTASysCtrlAlarmSeverityLevel
}
STATUS current
DESCRIPTION
"The highest active alarm severity has changed."
--#TYPE "Informational - The highest active alarm severity has changed."
--#SUMMARY "detected at shelf: %s"
--#ARGUMENTS { 1 }
--#SEVERITY INFORMATIONAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006359}
--
-- Device Com Fail Alarm
--
adTASysCtrlDeviceComFail NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"This trap indicates that an RS485 client has failed to respond."
--#TYPE "Major - An RS485 client has failed to respond."
--#SUMMARY "An RS485 client has failed to respond to host: %s"
--#SUMMARY ""
--#ARGUMENTS { 1 }
--#SEVERITY MAJOR
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006360}
--
-- SWDNLD
--
adTASysCtrlSwdnldStarted NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"Software download started."
--#TYPE "Informational - A software download has been initiated by a TL1 command."
--#SUMMARY "Detected at shelf: %s"
--#ARGUMENTS { 1 }
--#SEVERITY INFORMATIONAL
--#GENERIC 6
--#CATEGORY "Status Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006363}
adTASysCtrlSwdnldComplete NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"Software download complete."
--#TYPE "Informational - A TL1 initiated software download has completed."
--#SUMMARY "Detected at shelf: %s"
--#ARGUMENTS { 1 }
--#SEVERITY INFORMATIONAL
--#GENERIC 6
--#CATEGORY "Status Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006365}
adTASysCtrlSwdnldFailure NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"Software download failure."
--#TYPE "Informational - A TL1 initiated software download has failed."
--#SUMMARY "Detected at shelf: %s"
--#ARGUMENTS { 1 }
--#SEVERITY INFORMATIONAL
--#GENERIC 6
--#CATEGORY "Status Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006367}
--
-- System Controlled Reboot Traps
--
adTaSysCtrlRebootTraps OBJECT IDENTIFIER ::= { adTaSysCtrlReboot 0 }
adTaSysCtrlRebootException NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaSysCtrlRebootLastStatus
}
STATUS current
DESCRIPTION
"System Controlled Reboot exception."
--#TYPE "Informational - System Controlled Reboot operation could not be initiated or failed."
--#SUMMARY "detected at shelf: %s, status: %s"
--#ARGUMENTS { 1, 2 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaSysCtrlRebootTraps 1006368}
-- adTaSysCtrlSNMPProvChange NOTIFICATION-TYPE
--::= 1006370
-- Do not use 1006370 for a trap number this is reserved for adTaSysCtrlSNMPProvChange
-- !!! Do not use 1006370 for a trap number this is reserved for adTaSysCtrlSNMPProvChange
--
-- System Data Error
--
adTAeSysSystemDataError NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTaDataLossDescription
}
STATUS current
DESCRIPTION
"System Data Loss exception."
--#TYPE "Informational - Data loss or coruption error."
--#SUMMARY "detected at shelf: %s, status: %s : Error: %s"
--#ARGUMENTS { 1, 2 , 3}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006372}
adTAPowerSheddingServerTimeoutClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTASysCtrlPowerShedRemoteServerIP,
adTASysCtrlPowerShedStatus
}
STATUS current
DESCRIPTION
"Power Shedding Server Timeout Clear"
--#TYPE "Major - Power Shedding Server Timeout Clear"
--#SUMMARY "adTaControllerMgmtTraps 1006373: Power Shedding Server
--#SUMMARY "timeout clear at chassis: %s"
--#ARGUMENTS { 1 }
--#SEVERITY MAJOR
--#GENERIC 6
--#CATEGORY "Power Shedding Server Timeout Clear"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006373}
adTAPowerSheddingServerTimeout NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTASysCtrlPowerShedRemoteServerIP,
adTASysCtrlPowerShedStatus
}
STATUS current
DESCRIPTION
"Power Shedding Server Timeout"
--#TYPE "Major - Power Shedding Server Timeout"
--#SUMMARY "adTaControllerMgmtTraps 1006373: Power Shedding Server""
--#SUMMARY "timeout at chassis: %s"
--#ARGUMENTS { 1 }
--#SEVERITY MAJOR
--#GENERIC 6
--#CATEGORY "Power Shedding Server Timeout"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= {adTaControllerMgmtTraps 1006374}
adTASysCtrlCardSensed NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A card has been sensed in the chassis."
--#TYPE "Informational - A card has been sensed in the chassis"
--#SUMMARY "Card sensed in chassis;"
--#SUMMARY "chassis: %s, slot: %d"
--#ARGUMENTS { 1, 2 }
--#SEVERITY INFORMATIONAL
--#GENERIC 6
--#CATEGORY "Configuration Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adTaControllerMgmtTraps 1006376 }
adTASysCtrlCardNotSensed NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A card is no longer sensed in the chassis."
--#TYPE "Warning - A card not sensed in the chassis"
--#SUMMARY "Card not sensed in chassis;"
--#SUMMARY "chassis: %s, slot: %d"
--#ARGUMENTS { 1, 2 }
--#SEVERITY INFORMATIONAL
--#GENERIC 6
--#CATEGORY "Configuration Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adTaControllerMgmtTraps 1006377 }
adTASysCtrlCardReady NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A card is ready to be managed."
--#TYPE "Informational - A card is ready to be managed."
--#SUMMARY "Card is ready to be managed;"
--#SUMMARY "chassis: %s, slot: %d"
--#ARGUMENTS { 1, 2 }
--#SEVERITY INFORMATIONAL
--#GENERIC 6
--#CATEGORY "Configuration Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adTaControllerMgmtTraps 1006378 }
adTASysCtrlCardNotReady NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
adTAeSCUTrapAlarmLevel
}
STATUS current
DESCRIPTION
"A card is not ready to be managed."
--#TYPE "Informational - A card is not ready to be managed."
--#SUMMARY "Card is not ready to be managed;"
--#SUMMARY "chassis: %s, slot: %d"
--#ARGUMENTS { 1, 2 }
--#SEVERITY INFORMATIONAL
--#GENERIC 6
--#CATEGORY "Configuration Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adTaControllerMgmtTraps 1006379 }
--
-- AutoUpgrade EOSS traps
--
adTaSysCtrlAutoUpgradeEOSSWarningClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex
}
STATUS current
DESCRIPTION
"Auto Upgrade End Of Software Support Warning (Clear)."
--#TYPE "Warning - Auto Upgrade End Of Software Support Warning"
--#SUMMARY "Auto Upgrade End Of Software Support Warning Clear"
--#SUMMARY "detected at chassis: %s, slot: %d"
--#ARGUMENTS { 1,2 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Auto Upgrade End Of Software Support Warning"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adTaControllerMgmtTraps 1006380 }
adTaSysCtrlAutoUpgradeEOSSWarningActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex
}
STATUS current
DESCRIPTION
"This trap is used to indicate the module may not be supported
by future SystemReleases.
Please contact Adtran customer support for further information."
--#TYPE "Warning - Auto Upgrade End Of Software Support Warning"
--#SUMMARY "Auto Upgrade End Of Software Support Warning Active"
--#SUMMARY "detected at chassis: %s, slot: %d"
--#ARGUMENTS { 1,2 }
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Auto Upgrade End Of Software Support Warning"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adTaControllerMgmtTraps 1006381 }
adTaSysCtrlAutoUpgradeEOSSDeniedClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex
}
STATUS current
DESCRIPTION
"Auto Upgrade End Of Software Support Denied (Clear)."
--#TYPE "Minor - Auto Upgrade End Of Software Support Denied"
--#SUMMARY "Auto Upgrade End Of Software Support Denied Clear"
--#SUMMARY "detected at chassis: %s, slot: %d"
--#ARGUMENTS { 1,2 }
--#SEVERITY MINOR
--#GENERIC 6
--#CATEGORY "Auto Upgrade End Of Software Support Denied"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adTaControllerMgmtTraps 1006382 }
adTaSysCtrlAutoUpgradeEOSSDeniedActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex
}
STATUS current
DESCRIPTION
"This trap is used to indicate the module is not supported by the
SystemRelease of the provisioned AutoUpgrade configuration file.
AutoUpgrade cannot proceed until this is resolved.
Please contact Adtran customer support for further information."
--#TYPE "Minor - Auto Upgrade End Of Software Support Denied"
--#SUMMARY "Auto Upgrade End Of Software Support Denied Active"
--#SUMMARY "detected at chassis: %s, slot: %d"
--#ARGUMENTS { 1,2 }
--#SEVERITY MINOR
--#GENERIC 6
--#CATEGORY "Auto Upgrade End Of Software Support Denied"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adTaControllerMgmtTraps 1006383 }
--
-- AutoUpgrade EOSS traps
--
adTASysConfigurationChange NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adTASysLastConfigChangeAlarmTime
}
STATUS current
DESCRIPTION
"A system configuration change has occurred.
The frequency of this alarm is controlled by the
adTASysConfigurationChangeTimer OID."
--#TYPE "Informational - A system configuration change has occurred."
--#SUMMARY "System configuration change."
--#SUMMARY "chassis: %s"
--#ARGUMENTS { 1 }
--#SEVERITY INFORMATIONAL
--#GENERIC 6
--#CATEGORY "Configuration Events"
--#SOURCE_ID "A"
--#TIMEINDEX 0
::= { adTaControllerMgmtTraps 1006384 }
END
View Git Blame Copy Permalink