ADTRAN-TACONTROLER-PRODUCT-MIB DEFINITIONS ::= BEGIN -- TITLE: The ADTRAN TA3000 MIB -- PRODUCT: 1181001L1 -- VERSION: 1.14 -- DATE: 10/15/2008 -- DATE: 10/24/2008 -- AUTHOR: Arthur Poleon -- SNMP: SNMPv2 -- MIB ARC: adtran.adShared -- NOTES -- This is a generic MIB for all versions of the Total Access System Controller -- Units that use the second generation RMD files and the generic chassis MIBs. -- This MIB defines the object identifier (OID) for PCU HDX, SCU, OPTI6100, -- TA5000, TA110F, and others... -- HISTORY: -- 11/01/2005 ap First edition. -- 11/11/2005 rjf Update descriptions. -- 11/16/2005 rjf More description updates. -- 11/17/2005 KGG Changed taControllerMgmt to adTaControllerMgmt -- 02/06/2006 KMM Changes while adding support for packed sstate msgs, added: -- *) adTASetSingleServiceStateMsgFail -- *) adTAGetSingleServiceStateMsgFail -- *) adTASetAllServiceStateMsgFail -- *) adTAGetAllServiceStateMsgFail -- 04/03/2006 KMM Added support for provisioning mismatch alarm by adding -- adTACleiCodeMisMatch. -- 04/05/2006 JMC Added adTATIDSysNameSyncEnable. -- 04/06/2006 DLW Added active/clear adTASoftwareVerMisMatch traps for the -- software version mismatch alarm. -- 05/03/2006 KGG Initial work on adding Power Shedding OIDs and Traps -- to be completed by JMC - grep adTASysCtrlPowerShed for OIDs -- grep PowerShedding for Traps -- 05/09/2006 JMC Added Power Shedding OIDs and Alarms. -- 05/11/2006 JMC Fixed up adTASysCtrlPowerShedAlmInput description with regard to TA3000. -- 06/02/2006 JMC A few touches to Power Shedding provitems. Added Module Discovery Status stuff. -- 06/12/2006 KMM Adding support for HFANM. Added: -- *) adTAFanMPowerAFailClear -- *) adTAFanMPowerAFail -- *) adTAFanMPowerBFailClear -- *) adTAFanMPowerBFail -- 06/09/2006 JMC Added shelf-indexed table for new alarm status OID. -- Changed some naming of my previous slot-indexed table. -- 06/19/2006 KGG Changed Cri,Maj,Min Relay Test Alarm Severities to match alarm type. -- 09/26/2006 KGG Added adTACleiCodeMisMatchClear ID: 1006324. -- 09/28/2006 KGG Updated Description of the PowerShedCountDown OID. -- 10/05/2006 BKP Added OIDs and traps for System Release Manager feature support. -- 10/05/2006 BKP Added OIDs and traps for System Release Manager feature support. -- Fixed compiler Not Used Warning by removing adGenSlotProdSwVersion from the IMPORTS section. -- Added a SRM release incomplete bitmask value of 32 Internal Modspec Info Error(Parser doesn't have info) -- 10/11/2006 BKP Changed Release Incomplete references to Release Error. Modified incomplete bitmask and alarms. -- 10/19/2006 BKP Changed the SRM Release Files table to return 1 string of all its info with adTaSysCtrlSrmRlsFilesInfo, -- rather than having individual OIDs for the different types of file info. This new format improves readability. -- Added adTaSysCtrlSrmUpgradeFilename as a varbind for the SRM Upgrade Traps, and adTaSysCtrlSrmReleaseFilename -- as a varbind for the SRM Primary Backup Traps. -- 11/03/2006 BKP Added adTaSysCtrlSrmUpgradeRetries and adTaSysCtrlSrmValidateInterval to support the new SRM provisioning options. -- 11/06/2006 BKP Changed the interval for adTaSysCtrlSrmValidateInterval from hours to days, and decreased the max value to 365. -- 11/30/2006 BKP Added the following description field text to select SRM prov items, "Sets to this OID will have no effect if the SRM system is busy." -- 11/30/2006 RJF Add adTaSysCtrlAutoUpgrade brx @ 1.3.6.1.4.1.664.5.63.100 -- 01/02/2007 DLW Added adTASysCtrlAlarmSeverityChanged and adTASysCtrlAlarmSeverityLevel for Alarm Severity. -- 01/23/2007 BKP Added adTaSysCtrlSrmSupport to be able to Enable and Disable the SRM feature. -- 01/24/2007 BKP Changed adTaSysCtrlSrmSupport to adTaSysCtrlSrmAutoUpgradeCtrl. -- 02/20/2007 BKP Removed KEY3's for SRM scheduled timers because they are only displayed with tech. supt. -- privileges on the SRM more details screen. Also removed SNMP support and renumbered the SRM -- OIDs, since we have not released this code. -- Changed SRM variables and text to support the SRM "Download", "Activate", "Active Release", and "Backup Release" terminology. -- 02/23/2007 DLW Added Traps adTASysCtrlDeviceComFail, adTASysCtrlSwdnldStarted, adTASysCtrlSwdnldComplete, adTASysCtrlSwdnldFailure -- 03/14/2007 AP Add adTaSysCtrlFileExport - adTaSysCtrlSeltDelt - adTaSysCtrlGeneralFileExport - adTaSysCtrlSystemLog -- 08/15/2007 RJF Add adTaSysCtrlAutoUpgradeErrorSlots. -- 11/05/2007 KABC Added support for KEY3_GENERATE_SSH_KEYS, KEY3_GENERATE_SSH_KEY_SIZE, and KEY3_CURRENT_SSH_KEY_SIZE. -- 11/07/2007 KABC Added support for KEY3_GENERATING_KEY_STATUS. -- 11/12/2007 KABC Corrected OBJECT IDENTIFIER definition for adTaSysCtrlSysSshKeyMgmt -- 12/06/2007 AP Add DHCP Server Management OIDs -- 01/24/2008 RJF Add Module Reset Oids -- 01/29/2008 BKP Add TL1 Echo OID -- 02/12/2008 RJF Remove enum containing 0 (zero) from adTaModuleResetCtrl. The values are fully -- documented in the OID-group comment heading. -- 03/25/2008 AP Add SSL Oids. -- 07/17/2008 KABC Deprecated adTASysCtrlAlarmSeverityLevel -- 09/24/2008 RJF Add adTaSysCtrlAutoUpgradeNeededSlots adTaSysCtrlAutoUpgradeDeferredResetSlots, -- adTaSysCtrlAutoUpgradeUseSCR -- 09/24/2008 RJF Add adTaSysCtrlReboot brx @ 1.3.6.1.4.1.664.5.63.170 -- 10/02/2008 RJF Add adTaSysCtrlAutoUpgradeActiveSlotsBitmask, adTaSysCtrlAutoUpgradeErrorSlotsBitmask, -- adTaSysCtrlAutoUpgradeNeededSlotsBitmask, adTaSysCtrlAutoUpgradeDeferResetSlotsBitmask, -- adTaSysCtrlAutoUpgradeSCRStatus, adTaSysCtrlRebootInitiate, adTaSysCtrlRebootLastStatus, -- adTaSysCtrlRebootException (trap- roughed in) -- 10/15/2008 RJF Prior to release, change adTaSysCtrlAutoUpgradeUseSCR enum from enable/disable to yes/no to match menus. -- Correct numeric oid assignment error in adTaSysCtrlAutoUpgradeSCRStatus. -- 10/23/2008 AP Add adTaSntpGMTtimeZoneString -- 10/24/2008 RJF Re-tweak adTaSysCtrlAutoUpgradeSCRStatus enum value names -- 12/22/2008 RJF Change extended SCA/AutoUpgrade bitmask oids to accept/return up to 256 bytes because -- some systems already do (was 128). -- 01/27/2009 KABC Added adTATL1PortExchange -- 04/20/2009 DLW Added severity OID adTASysCtrlPowerShedStateAlarmSeverity for power shed state. -- Added severity variable to adTAPowerSheddingActivated. -- 05/08/2009 AP Add syslog server 2, 3, and 4. -- 06/29/2009 KABC Convert to version SNMP v2 -- 08/12/2009 WFE Added adTaSysCtrlRebootArmedStatus. -- 02/01/2010 AP Move "adTaSysCtrlRebootException" (adTaSysCtrlReboot.0.1006368) to adTaControllerMgmt.0.1006368 -- also known as "adTaControllerMgmtTraps.1006368". -- 06/22/2010 WFE Move "adTaSysCtrlRebootException" from adTaControllerMgmt.0.1006368 to adTaSysCtrlReboot.0.1006368. -- Added adTASysCtrlPowerShedStateAlarmSeverity varbind to adTAPowerSheddingDeActivated trap to match adTAPowerSheddingActivated. -- 07/20/2010 WFE Added adTAPowerSheddingServerTimeoutClear and adTAPowerSheddingServerTimeout. -- Increased max value of adTASysCtrlPowerShedAlmInput from 17 to 18. -- 02/10/2011 AP Added adTaSntpServer2, adTaSntpServer3, adTaSntpServer4, adTaSntpTimeOutProv, adTaSntpTimeRetryProv -- 05/09/2011 WFE "DO NOT MAKE HISTORY COMMENTS HERE!!!! Revision history now in REVISION/DESCRIPTION clauses below" IMPORTS Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, IpAddress, TimeTicks, Counter32 FROM SNMPv2-SMI adShared FROM ADTRAN-MIB adTrapInformSeqNum FROM ADTRAN-GENTRAPINFORM-MIB DisplayString FROM SNMPv2-TC sysName FROM SNMPv2-MIB adGenSlotInfoIndex, adGenSlotProdPartNumber, adGenSlotProdName, adGenSlotProdCLEIcode FROM ADTRAN-GENSLOT-MIB adGenPortTrapIdentifier FROM ADTRAN-GENPORT-MIB adTAeSCUenvAlarmUserName, adTAeSCUenvAlarmInputLevel, adTAeSCUTrapAlarmLevel FROM ADTRAN-TAeSCUEXT1-MIB ifIndex FROM IF-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB; -- Module ID ================================================================================================ adTaControllerMgmt MODULE-IDENTITY LAST-UPDATED "202107201540Z" ORGANIZATION "ADTRAN, Inc." CONTACT-INFO "CND Tech Support Postal: ADTRAN, Inc. 901 Explorer Blvd. Huntsville, AL 35806 Tel: +1 800 726-8663 Fax: +1 256 963 6217 E-mail: support@adtran.com" DESCRIPTION "ADTRAN TA Controller Products MIB" REVISION "202107201540Z" DESCRIPTION "Update support for signed certificate requests/signed certificates to provide import/export status." REVISION "202106300000Z" DESCRIPTION "Add support for generating signed certificate requests and importation of signed certs." REVISION "201606130000Z" DESCRIPTION "Add support IPV6 address for SCM servers." REVISION "201310231139Z" DESCRIPTION "Decrease severity of adTaSysCtrlAutoUpgradeEOSSWarningActive (and *Clear) from Minor to Warning(Alert) Decrease severity of adTaSysCtrlAutoUpgradeEOSSDeniedActive (and *Clear) from Major to Minor. Minor rewording of the EOSS Warning/Deny descriptions." REVISION "201310171355Z" DESCRIPTION "Add initial support for AutoUpgrade EOSS (End Of Software Support) query and trap oids. Clarify several AutoUpgrade bitmask descriptions." REVISION "201310151500Z" DESCRIPTION "Add system configuration change alarm." REVISION "201305031500Z" DESCRIPTION "Add adTaGeneralExportRemoteHostMethod - File transfer method to use to transfer General Export files from the controller." REVISION "201206191500Z" DESCRIPTION "Add adTaGenExportExceptionReportEnable - Enable/Disable automatically generated exception reports." REVISION "201107181639Z" DESCRIPTION "Added adTASysCtrlCardNotReady, adTASysCtrlCardReady, adTASysCtrlCardNotSensed, adTASysCtrlCardSensed" REVISION "201106300000Z" DESCRIPTION "Added adTaSysCtrlVLANBridge, adTaSysCtrlVLANBridgeMode, adTaSysCtrlVLANBridgeInterface. Added adTaSntpServer2, adTaSntpServer3, adTaSntpServer4, adTaSntpTimeOutProv, adTaSntpTimeRetryProv adTaSntpTimeOutCountServer2, adTaSntpTimeOutCountServer3, adTaSntpTimeOutCountServer4, adTaSntpCurrentServer, adTaGenExportPrefixString, adTaGenExportSuffixString" REVISION "201105091256Z" DESCRIPTION "Added adTAScmEthernetInterfaceModeTable." REVISION "201611280000Z" DESCRIPTION "Added adTaSysCtrlReKeyTimeout, adTaSysCtrlReKeyDataLimit, and adTaSysCtrlRebootMode." ::= { adShared 63 } -- OBJECT IDENTIFIERS ======================================================================================= adTaSysCtrlShelf OBJECT IDENTIFIER ::= { adTaControllerMgmt 30 } adTaSysCtrlSlot OBJECT IDENTIFIER ::= { adTaControllerMgmt 40 } adTaSysCtrlScaMgmt OBJECT IDENTIFIER ::= { adTaControllerMgmt 50 } adTaSysCtrlProvMgmt OBJECT IDENTIFIER ::= { adTaControllerMgmt 60 } adTaSysCtrlPowerShed OBJECT IDENTIFIER ::= { adTaControllerMgmt 70 } adTaSysCtrlSysSSHMgmt OBJECT IDENTIFIER ::= { adTaControllerMgmt 80 } adTaSysCtrlSysRlsMgmt OBJECT IDENTIFIER ::= { adTaControllerMgmt 90 } adTaSysCtrlAutoUpgrade OBJECT IDENTIFIER ::= { adTaControllerMgmt 100 } adTaSysCtrlFileExport OBJECT IDENTIFIER ::= { adTaControllerMgmt 110 } adTaSysCtrlSNTP OBJECT IDENTIFIER ::= { adTaControllerMgmt 120 } adTaSysLog OBJECT IDENTIFIER ::= { adTaControllerMgmt 130 } adTaDhcpServer OBJECT IDENTIFIER ::= { adTaControllerMgmt 140 } adTaModuleReset OBJECT IDENTIFIER ::= { adTaControllerMgmt 150 } adTaSecurity OBJECT IDENTIFIER ::= { adTaControllerMgmt 160 } adTaSysCtrlReboot OBJECT IDENTIFIER ::= { adTaControllerMgmt 170 } adTaSysAlarmVarbinds OBJECT IDENTIFIER ::= { adTaControllerMgmt 180 } adTaSysCtrlVLANBridge OBJECT IDENTIFIER ::= { adTaControllerMgmt 190 } adTaSysCtrlSystemLog OBJECT IDENTIFIER ::= { adTaSysCtrlFileExport 1 } adTaSysCtrlGeneralFileExport OBJECT IDENTIFIER ::= { adTaSysCtrlFileExport 20 } adTaSSLConfiguration OBJECT IDENTIFIER ::= { adTaSecurity 50} adTaSSLRemoteKeyDownload OBJECT IDENTIFIER ::= { adTaSSLConfiguration 100} -- -- Controller SCA support for primary and secondary shelves -- adTaSysCtrlScaTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTaSysCtrlScaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Expansion OIDs for the HDX system." ::= { adTaSysCtrlScaMgmt 20 } adTaSysCtrlScaEntry OBJECT-TYPE SYNTAX AdTaSysCtrlScaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { adTaSysCtrlCUShelfNumber } ::= { adTaSysCtrlScaTable 1 } AdTaSysCtrlScaEntry ::= SEQUENCE { adTaSysCtrlCUShelfNumber INTEGER, adTaSysCtrlSCAProvItemChanged OCTET STRING, adTaSysCtrlSCAPresentCards OCTET STRING, adTaSysCtrlSCASlotsWithProvData OCTET STRING, adTaSysCtrlSCAoptRestoreCardBitmask OCTET STRING } adTaSysCtrlCUShelfNumber OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The shelf number the controller is installed in." ::= { adTaSysCtrlScaEntry 1 } adTaSysCtrlSCAProvItemChanged OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bitmap of cards with changed provisions. This read-only OID will return a bitmap of slots whose provisions have changed since power-up or the last SCA save operation. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first byte corresponds to slot 1, the LSB of the second byte corresponds to slot 9, with ascending slot numbers being represented until the last byte. In general, only the bytes required to convey all the 1 bits will actually be sent, all remaining unsent bytes are implied to contain only 0s. At least one byte will be sent. A bit value of 1 indicates provisions have been changed." ::= { adTaSysCtrlScaEntry 5 } adTaSysCtrlSCAPresentCards OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bitmap of cards 'present' in the shelf. This read-only OID will return a bitmap of slots with cards installed. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first byte corresponds to slot 1, the LSB of the second byte corresponds to slot 9, with ascending slot numbers being represented until the last byte. In general, only the bytes required to convey all the 1 bits will actually be sent, all remaining unsent bytes are implied to contain only 0s. At least one byte will be sent. A bit value of 1 indicates a card is present." ::= { adTaSysCtrlScaEntry 7 } adTaSysCtrlSCASlotsWithProvData OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bitmap of slots with provision data. This read-only OID will return a bitmap of slots with provision information. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first byte corresponds to slot 1, the LSB of the second byte corresponds to slot 9, with ascending slot numbers being represented until the last byte. In general, only the bytes required to convey all the 1 bits will actually be sent, all remaining unsent bytes are implied to contain only 0s. At least one byte will be sent. A bit value of 1 indicates provisions are present." ::= { adTaSysCtrlScaEntry 9 } adTaSysCtrlSCAoptRestoreCardBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "SCA restore to linecard enable bitmask. This OID accesses an enable/disable bitmap indicating which slots should have their provision information restored during an SCA restore operation. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first byte corresponds to slot 1, the LSB of the second byte corresponds to slot 9, with ascending slot numbers being represented until the last byte. In general, only the bytes required to convey all the 1 bits will actually be sent, all remaining unsent bytes are implied to contain only 0s. At least one byte will be sent. A bit value of 1 indicates restoration of provision information is enabled for the corresponding slot." ::= { adTaSysCtrlScaEntry 11 } adTaSysCtrlSCAConfigChangeVersion OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current version number of the SCA file. If a change happen on the system, this OID will return the next version of the SCA file." ::= { adTaSysCtrlScaMgmt 3 } -- -- Controller Provisioning -- adTATIDSysNameSyncEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the synchronization of the TID and SNMP SysName provisions. Enabling this option will overwrite the current SysName with the TID and any subsequent set to the SysName must meet TID syntax restrictions." ::= { adTaSysCtrlProvMgmt 10 } adTATL1echoEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable character echo on the TL1 port." ::= { adTaSysCtrlProvMgmt 11 } adTATL1PortExchange OBJECT-TYPE SYNTAX INTEGER { exchange(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Exchange the TL1 ports." ::= { adTaSysCtrlProvMgmt 12 } adTAScmEthernetInterfaceModeTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTAScmEthernetInterfaceModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ethernet interface modes." ::= { adTaSysCtrlProvMgmt 13 } adTAScmEthernetInterfaceModeEntry OBJECT-TYPE SYNTAX AdTAScmEthernetInterfaceModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set ethernet interface mode to ethercraft or ethernet." INDEX { ifIndex } ::= { adTAScmEthernetInterfaceModeTable 1 } AdTAScmEthernetInterfaceModeEntry ::= SEQUENCE { adTAScmEthernetInterfaceMode INTEGER } adTAScmEthernetInterfaceMode OBJECT-TYPE SYNTAX INTEGER { ethercraft(1), ethernet(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set ethernet interface mode to ethercraft or ethernet." ::= { adTAScmEthernetInterfaceModeEntry 1 } -- -- Controller Power Shed -- adTASysCtrlPowerShedEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Global Enable / Disable of Power Shedding for the entire system." ::= { adTaSysCtrlPowerShed 10 } adTASysCtrlPowerShedAlmInput OBJECT-TYPE SYNTAX INTEGER (1..18) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the External Alarm Input that will be monitored that will indicate loss of AC power. The enumerated set of values is system-dependent. For TA5000: External 1 = 1 External 2 = 2, External 3 = 3, External 4 = 4, External 5 = 5, External 6 = 6, External 7 = 7, External 8 = 8, External 9 = 9, External 10 = 10, External 11 = 11, External 12 = 12, External 13 = 13, External 14 = 14, External 15 = 15, External 16 = 16, External ACO = 17, Remote Server = 18 For OSP: External 1 = 1 External 2 = 2, External 3 = 3, External 4 = 4, External 5 = 5, External ACO = 6, Remote Server = 7 For TA3000 / HDX Systems: External 1 = 1 External 2 = 2, Remote = 3, External ACO = 4 " ::= { adTaSysCtrlPowerShed 11 } adTASysCtrlPowerShedActivateDelay OBJECT-TYPE SYNTAX INTEGER (1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the number of minutes the controller should wait to initiate Power Shedding once AC power is lost." ::= { adTaSysCtrlPowerShed 12 } adTASysCtrlPowerShedDeActivateDelay OBJECT-TYPE SYNTAX INTEGER (1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the number of minutes the controller should wait to cancel Power Shedding once AC power is restored." ::= { adTaSysCtrlPowerShed 13 } adTASysCtrlPowerShedACFailAlarmDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "User specified string that describes the AC failure alarm." ::= { adTaSysCtrlPowerShed 14 } adTASysCtrlPowerShedACFailAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { info(2), alert(3), minor(4), major(5), critical(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Power Shedding AC Failure alarm severity." ::= { adTaSysCtrlPowerShed 15 } adTASysCtrlPowerShedACFailAlarmAIDIndex OBJECT-TYPE SYNTAX INTEGER (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "AID Index." ::= { adTaSysCtrlPowerShed 16 } adTASysCtrlPowerShedACFailAlarmConditionCode OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) MAX-ACCESS read-write STATUS current DESCRIPTION "Condition code." ::= { adTaSysCtrlPowerShed 17 } adTASysCtrlPowerShedStatus OBJECT-TYPE SYNTAX INTEGER { inactive(1), inactiveWaitingToActivate(2), active(3), activeWaitingToDeactivate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current Power Shedding Status of the System." ::= { adTaSysCtrlPowerShed 30 } adTASysCtrlPowerShedCountDown OBJECT-TYPE SYNTAX INTEGER (0..1440) MAX-ACCESS read-only STATUS current DESCRIPTION "Countdown timer indicating the number of minutes remaining until Power Shedding is Activated or until Power Shedding is Deactivated. If Power Shedding is ENABLED and the CountDown is zero (0), it means the countdown time has expired and Power Shedding is taking place. If Power Shedding is DISABLED and the CountDown is zero (0), it means Power Shedding is Inactive or Off." ::= { adTaSysCtrlPowerShed 31 } adTASysCtrlPowerShedStateAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { info(2), alert(3), minor(4), major(5), critical(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Power Shedding State alarm severity." ::= { adTaSysCtrlPowerShed 32 } adTASysCtrlPowerShedRemoteServerIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Remote Power-Shedding server IP address. Zero signifies 'none'." ::= { adTaSysCtrlPowerShed 33 } -- -- Slot Indexed Table -- adTASysCtrlModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTASysCtrlModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of status OIDs indexed by slot/module." ::= { adTaSysCtrlSlot 3 } adTASysCtrlModuleEntry OBJECT-TYPE SYNTAX AdTASysCtrlModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { adTASysCtrlModuleNumber } ::= { adTASysCtrlModuleTable 1 } AdTASysCtrlModuleEntry ::= SEQUENCE { adTASysCtrlModuleNumber INTEGER, adTASysCtrlModuleDiscoveryStatus INTEGER } adTASysCtrlModuleNumber OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for each slot/module." ::= { adTASysCtrlModuleEntry 1 } adTASysCtrlModuleDiscoveryStatus OBJECT-TYPE SYNTAX INTEGER { empty (1), discovering (2), ok-no-rmd (3), ok (4), unresponsive (5), unknown (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current discovery status of each slot or module in the system." ::= { adTASysCtrlModuleEntry 2 } -- -- Shelf Indexed Table -- adTASysCtrlShelfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTASysCtrlShelfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A shelf-indexed table of information." ::= { adTaSysCtrlShelf 3 } adTASysCtrlShelfEntry OBJECT-TYPE SYNTAX AdTASysCtrlShelfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { adTASysCtrlShelfNumber } ::= { adTASysCtrlShelfTable 1 } AdTASysCtrlShelfEntry ::= SEQUENCE { adTASysCtrlShelfNumber INTEGER, adTASysCtrlModuleRemovedStatus OCTET STRING } adTASysCtrlShelfNumber OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Index representing each shelf." ::= { adTASysCtrlShelfEntry 1 } adTASysCtrlModuleRemovedStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A bitmask representing Module Removed status for each shelf. Trailing empty bytes are truncated." ::= { adTASysCtrlShelfEntry 2 } -- -- Controller System SSH Manager OIDs -- adTaSysCtrlSysSshKeyMgmt OBJECT IDENTIFIER ::= { adTaSysCtrlSysSSHMgmt 10 } adTaSysCtrlCurrentKeySize OBJECT-TYPE SYNTAX INTEGER (512..2048) MAX-ACCESS read-only STATUS current DESCRIPTION "Read-only display of current key size." ::= { adTaSysCtrlSysSshKeyMgmt 1 } adTaSysCtrlKeySize OBJECT-TYPE SYNTAX INTEGER (512..2048) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets a new key size." ::= { adTaSysCtrlSysSshKeyMgmt 2 } adTaSysCtrlGenerateKeys OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-write STATUS current DESCRIPTION "Generates new keys based upon new key size." ::= { adTaSysCtrlSysSshKeyMgmt 15 } adTaSysCtrlGenKeyStatus OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "Status of new keys generation process." ::= { adTaSysCtrlSysSshKeyMgmt 16 } adTaSysCtrlReKeyTimeout OBJECT-TYPE SYNTAX INTEGER (0..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "Amount of time in minutes since last key exchange to trigger a rekey. The default value is 480 minutes. Use 0 for no limit. " DEFVAL { 480 } ::= { adTaSysCtrlSysSshKeyMgmt 20 } adTaSysCtrlReKeyDataLimit OBJECT-TYPE SYNTAX INTEGER (0..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Amount of data exchange in megabytes since last key exchange to trigger a rekey. The default value is 1000 megabytes. Use 0 for no limit." DEFVAL { 1000 } ::= { adTaSysCtrlSysSshKeyMgmt 21 } -- -- Controller System Release Manager OIDs -- -- SRM Active and/or Backup Release Table adTaSysCtrlSysRlsTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTaSysCtrlSysRlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SRM System Release Table." ::= { adTaSysCtrlSysRlsMgmt 1 } adTaSysCtrlSysRlsEntry OBJECT-TYPE SYNTAX AdTaSysCtrlSysRlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SRM System Release Table." INDEX { adTaSysCtrlSrmReleaseIndex } ::= { adTaSysCtrlSysRlsTable 1 } AdTaSysCtrlSysRlsEntry ::= SEQUENCE { adTaSysCtrlSrmReleaseIndex INTEGER, adTaSysCtrlSrmReleaseName DisplayString, adTaSysCtrlSrmReleaseFilename DisplayString, adTaSysCtrlSrmReleaseStatus DisplayString, adTaSysCtrlSrmReleaseMemoryUsageKB Integer32, adTaSysCtrlSrmReleaseFileCount Integer32, adTaSysCtrlSrmReleaseProductCount Integer32, adTaSysCtrlSrmReleaseFilesTableEntries Integer32, adTaSysCtrlSrmReleaseErrorBitmask Integer32 } adTaSysCtrlSrmReleaseIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "1 repersents the Active System Release, and 2 represents the Backup System Release." ::= { adTaSysCtrlSysRlsEntry 1 } adTaSysCtrlSrmReleaseName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "This OID displays the System Release Name." ::= { adTaSysCtrlSysRlsEntry 2 } adTaSysCtrlSrmReleaseFilename OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ReleaseFilename OID specifies the Release filename that was retrieved by the System Release Manager system. This release file contains information such as module part number, firmware filename, and firmware file details that are necessary to validate a System Release." ::= { adTaSysCtrlSysRlsEntry 3 } adTaSysCtrlSrmReleaseStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Release Status indicates the current state, status, and file counts for the Active or Backup system release. For example: Idle, Complete, 27/27 Files" ::= { adTaSysCtrlSysRlsEntry 4 } adTaSysCtrlSrmReleaseMemoryUsageKB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of flash memory KBytes the System Release is currently using to store the system release files." ::= { adTaSysCtrlSysRlsEntry 5 } adTaSysCtrlSrmReleaseFileCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unique files in a System Release, including the SRA file and the individual firmware files." ::= { adTaSysCtrlSysRlsEntry 6 } adTaSysCtrlSrmReleaseProductCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of products supported by the System Release." ::= { adTaSysCtrlSysRlsEntry 7 } adTaSysCtrlSrmReleaseFilesTableEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the adTaSysCtrlSysRlsFilesTable. This value is the adTaSysCtrlSrmReleaseProductCount plus 1 for the release file." ::= { adTaSysCtrlSysRlsEntry 8 } adTaSysCtrlSrmReleaseErrorBitmask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A system release can be in error for several reasons, and this bitmap is used to show which reason. The various bit value positions are: 1 File Not Found 2 Invalid File Length 4 Invalid File CRC 8 Invalid File Checksum 16 Parse Failed 32 Internal Modspec Info Error(Parser doesn't have info)" ::= { adTaSysCtrlSysRlsEntry 9 } -- SRM Release Files Table adTaSysCtrlSysRlsFilesTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTaSysCtrlSysRlsFilesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { adTaSysCtrlSysRlsMgmt 2 } adTaSysCtrlSysRlsFilesEntry OBJECT-TYPE SYNTAX AdTaSysCtrlSysRlsFilesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { adTaSysCtrlSrmReleaseIndex, adTaSysCtrlSrmRlsFilesIndex } ::= { adTaSysCtrlSysRlsFilesTable 1 } AdTaSysCtrlSysRlsFilesEntry ::= SEQUENCE { adTaSysCtrlSrmRlsFilesIndex Integer32, adTaSysCtrlSrmRlsFilesInfo DisplayString } adTaSysCtrlSrmRlsFilesIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index for a file that is part of a System Release. There will be duplicate filenames in this table, because different products may share firmware." ::= { adTaSysCtrlSysRlsFilesEntry 1 } adTaSysCtrlSrmRlsFilesInfo OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This OID displays a release file's filename, product part number, product rev range, file rev, and detailed file status info. The file status info will display the size in KBytes stored to flash, and timestamp when the file was stored. If the File is not found, then this OID will display 'File Not Found'." ::= { adTaSysCtrlSysRlsFilesEntry 2 } -- SRM Scalar OIDs adTaSysCtrlSrmCancel OBJECT-TYPE SYNTAX INTEGER { cancelSrmCommand(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Request that the current System Release Manager operation is be stopped. This OID will have no effect if the SRM system is not active (Idle/Cancel/Error/Complete states)." ::= { adTaSysCtrlSysRlsMgmt 10 } adTaSysCtrlSrmActivateBrls OBJECT-TYPE SYNTAX INTEGER { activateBackupRls(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This OID instructs the System Release Manager to make the Backup and Active Releases to switch roles. The Backup Release becomes the Active Release and vice versa. This OID will have no effect if the SRM system is busy downloading, backing up, or the Backup Release has errors. An Auto Upgrade busy state will also inhibit this OID's operation." ::= { adTaSysCtrlSysRlsMgmt 11 } adTaSysCtrlSrmBackupArls OBJECT-TYPE SYNTAX INTEGER { backupActiveRls(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This OID instructs the System Release Manager to overwrite the Backup Release with a backup copy of the Active Release. This OID will have no effect if the SRM system is busy downloading, backing up, or the Backup Release has errors." ::= { adTaSysCtrlSysRlsMgmt 12 } adTaSysCtrlSrmDownloadInitiate OBJECT-TYPE SYNTAX INTEGER { initiateSrmDownload(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This OID instructs the System Release Manager to replace the Backup release files with the SRM Download Filename release. SRM will use Remote IO to acquire files that are needed to complete the new System release. This OID will have no effect if the SRM system is busy downloading or backing up." ::= { adTaSysCtrlSysRlsMgmt 13 } adTaSysCtrlSrmDownloadSameFiles OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the SRM Download Same Files option. Enabling this option will instruct SRM to completly delete the Backup release and remotely get every file that is part of the new System release. Disabling this option will instruct SRM to only delete the Backup release files that are NOT part of the new System release, and remotely get only those files needed to complete the new System release. Sets to this OID will have no effect if the SRM system is busy." ::= { adTaSysCtrlSysRlsMgmt 14 } adTaSysCtrlSrmDownloadRetries OBJECT-TYPE SYNTAX INTEGER (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "This OID instructs the System Release Manager how many times it should attempt to Download files to the Backup system release after the first download has failed. Sets to this OID will have no effect if the SRM system is busy." ::= { adTaSysCtrlSysRlsMgmt 15 } adTaSysCtrlSrmDownloadFilename OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The DownloadFilename OID specifies the Release filename to be retrieved by the System Release Manager system. This release file contains information such as module part number, firmware filename, and firmware file details that are necessary to perform System Release Manager operations. The Filename may not contain spaces, quotes, path info, or other unusual characters that would generally be considered invalid in a filename specification. Sets to this OID will have no effect if the SRM system is busy." ::= { adTaSysCtrlSysRlsMgmt 16 } adTaSysCtrlSrmDownloadBasepath OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The DownloadBasepath OID allows the customer to specify a directory prefix where the SRM release and firmware files will be located on the server. It is assumed that the SRM release and firmware files will be located in the same directory. The Basepath argument may not contain spaces, commas, quotes, or other unusual characters that would generally be considered invalid in a path specification. Although the Controller does not interpret the contents of this string, please keep in mind that different operating systems have different rules concerning what constitutes valid characters and path/file separators. Sets to this OID will have no effect if the SRM system is busy." ::= { adTaSysCtrlSysRlsMgmt 17 } adTaSysCtrlSrmScheduledDownload OBJECT-TYPE SYNTAX DisplayString (SIZE(0..14)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ScheduledDownload OID allows the customer to specify a date and time that the SRM will start a download to the Backup System Release. The specified time must be greater than 1 minute, but no more than 90 days from the controller's current time. The date and time has the following format: MM/DD/YY HH:MM" ::= { adTaSysCtrlSysRlsMgmt 18 } adTaSysCtrlSrmScheduledActivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..14)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ScheduledActivate OID allows the customer to specify a date and time that SRM will make the Backup System Release the Active System Release. The specified time must be greater than 1 minute, but no more than 90 days from the controller's current time. The date and time has the following format: MM/DD/YY HH:MM" ::= { adTaSysCtrlSysRlsMgmt 19 } adTaSysCtrlSrmValidateInterval OBJECT-TYPE SYNTAX INTEGER (0..365) MAX-ACCESS read-write STATUS current DESCRIPTION "This OID instructs the System Release Manager how often, in days, it should check that a complete Active and/or Backup release is still valid. A value of 0 indicates interval checks should not be performed, and the validate checks performed at startup and after a Download or Backup are sufficient." ::= { adTaSysCtrlSysRlsMgmt 20 } adTaSysCtrlSrmStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This OID will return a formatted string describing the current status and progress of the SRM operations. Refer to the ''System Release Manager Feature'' user guide for details." ::= { adTaSysCtrlSysRlsMgmt 21 } adTaSysCtrlSrmAutoUpgradeCtrl OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SRM's control of Auto Upgrade. This option is enabled by default for controllers that support SRM. Enabling Auto Upgrade control forces Auto Upgrade to retrieve the system release package from the Flash File System. Disabling Auto Upgrade control instructs the Auto Upgrade system to retrieve files based off of the Auto Upgrade provisioned settings." ::= { adTaSysCtrlSysRlsMgmt 22 } -- -- AutoUpgrade OIDs -- adTaSysCtrlAutoUpgradeActiveSlots OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Return information regarding active AutoUpgrades. The format is a(b,b,b) where a is the number of slots currently upgrading, and b is a comma separated list of zero or more SNMP slots being upgraded, which may be truncated if the set is very large" ::= { adTaSysCtrlAutoUpgrade 1 } adTaSysCtrlAutoUpgradeErrorSlots OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Return information regarding slots with AutoUpgrade errors. The format is a(b,b,b) where a is the number of slots that are currently in an AutoUpgrade error-state, and b is a comma separated list of zero or more SNMP slots in an AutoUpgrade error state, which may be truncated if the set is very large" ::= { adTaSysCtrlAutoUpgrade 2 } adTaSysCtrlAutoUpgradeNeededSlots OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Return information regarding the number of slots needing upgrade. The format is a(b,b,b) where a is the number of slots needing upgrade, and b is a comma separated list of zero or more SNMP slots that need upgrade, which may be truncated if the set is very large" ::= { adTaSysCtrlAutoUpgrade 3 } adTaSysCtrlAutoUpgradeDeferredResetSlots OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Return information regarding slots that AutoUpgrade has deferred module reset following upgrade in conjunction with System Controlled Reset (SCR). The format is a(b,b,b) where a is the number of slots where reset has been deferred, and b is a comma separated list of zero or more SNMP slots that AutoUpgrade has deferred reset, which may be truncated if the set is very large" ::= { adTaSysCtrlAutoUpgrade 4 } adTaSysCtrlAutoUpgradeActiveSlotsBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only OID will return a bitmap of slots currently upgrading. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first byte corresponds to slot 1, the LSB of the second byte corresponds to slot 9, with ascending slot numbers being represented until the last byte. In general, only the bytes required to convey all the 1 bits will actually be sent, all remaining unsent bytes are implied to contain only 0s. At least one byte will be sent. A bit value of 1 indicates a card is currently upgrading." ::= { adTaSysCtrlAutoUpgrade 5 } adTaSysCtrlAutoUpgradeErrorSlotsBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only OID will return a bitmap of slots having an AutoUpgrade eror status. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first byte corresponds to slot 1, the LSB of the second byte corresponds to slot 9, with ascending slot numbers being represented until the last byte. In general, only the bytes required to convey all the 1 bits will actually be sent, all remaining unsent bytes are implied to contain only 0s. At least one byte will be sent. A bit value of 1 indicates a card has an AutoUpgrade error status." ::= { adTaSysCtrlAutoUpgrade 6 } adTaSysCtrlAutoUpgradeNeededSlotsBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only OID will return a bitmap of slots needing upgrade. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first byte corresponds to slot 1, the LSB of the second byte corresponds to slot 9, with ascending slot numbers being represented until the last byte. In general, only the bytes required to convey all the 1 bits will actually be sent, all remaining unsent bytes are implied to contain only 0s. At least one byte will be sent. A bit value of 1 indicates a card needs upgrade." ::= { adTaSysCtrlAutoUpgrade 7 } adTaSysCtrlAutoUpgradeDeferResetSlotsBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only OID will return a bitmap of slots whose post- upgrade reset has been deferred for System Controlled Reboot. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first byte corresponds to slot 1, the LSB of the second byte corresponds to slot 9, with ascending slot numbers being represented until the last byte. In general, only the bytes required to convey all the 1 bits will actually be sent, all remaining unsent bytes are implied to contain only 0s. At least one byte will be sent. A bit value of 1 indicates reset has been deferred for that slot." ::= { adTaSysCtrlAutoUpgrade 8 } adTaSysCtrlAutoUpgradeUseSCR OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls AutoUpgrades use of the System Controlled Reboot (SCR) system. If set to yes, module reboot will be deferred until later, based upon SCR settings." ::= { adTaSysCtrlAutoUpgrade 10 } adTaSysCtrlAutoUpgradeSCRStatus OBJECT-TYPE SYNTAX INTEGER { nonePending(1), readyForSCR(2), scrBusy(3), auNeeded(4), auBusy(5), auErrors(6), auNotUsingSCR(7), noneWaitingForSCR(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returns an enum indicating readiness to perform SCR with repect to the AutoUpgrade system. The SCR system will ignore all initiate requests unless the current value of adTaSysCtrlAutoUpgradeSCRStatus is ReadyForSCR." ::= { adTaSysCtrlAutoUpgrade 12 } adTaSysCtrlAutoUpgradeEOSSCapable OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether EOSS (End Of Software Support) information is present and valid in this software build." ::= { adTaSysCtrlAutoUpgrade 30 } adTaSysCtrlAutoUpgradeEOSSWarnSlotsBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only OID will return a bitmap of slots with an active EOSS (End Of Software Support) Warning status. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first byte corresponds to slot 1, the LSB of the second byte corresponds to slot 9, with ascending slot numbers being represented until the last byte. In general, only the bytes required to convey all the 1 bits will actually be sent, all remaining unsent bytes are implied to contain only 0s. At least one byte will be sent. A bit value of 1 indicates an active EOSS Warning status for this slot." ::= { adTaSysCtrlAutoUpgrade 32 } adTaSysCtrlAutoUpgradeEOSSDenySlotsBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only OID will return a bitmap of slots with an active EOSS (End Of Software Support) Denied status. This is an ascending sequence of bits where the LSB (Least Significant Bit) of the first byte corresponds to slot 1, the LSB of the second byte corresponds to slot 9, with ascending slot numbers being represented until the last byte. In general, only the bytes required to convey all the 1 bits will actually be sent, all remaining unsent bytes are implied to contain only 0s. At least one byte will be sent. A bit value of 1 indicates an active EOSS Denied status for this slot." ::= { adTaSysCtrlAutoUpgrade 34 } -- -- System Controlled Reboot (SCR) OIDs -- adTaSysCtrlRebootOperMode OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2), scheduled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "SCR Operating mode." ::= { adTaSysCtrlReboot 1 } adTaSysCtrlRebootSchedDateTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Future date/time to perform a scheduled SCR operation if SCR OperMode is set to scheduled, otherwise this value is ignored. Typical format of date/time strings are: 7/4/8 (date only, short 2008 year, 00:00:00 HRS) 7/4/2008 (date only, full 2008 year, 00:00:00 HRS) 8:15 (current date, 8:15:00 HRS) 8:15:5 (current date, 8:15:05 HRS) 7/4/2008 8:15 (7/4/2008 08:15:00) 7/4/8 08:15:05 (7/4/2008 08:15:05) Setting this provision to an empty string is valid and indicates a scheduled SCR operation should not be performed even if SCR OperMode has a value of scheduled. This string will be reformatted by the controller to reflect a full and correct date/time value. For example, if only the time is supplied, the current date will be inserted into the string in order to form a complete date/time specification." ::= { adTaSysCtrlReboot 2 } adTaSysCtrlRebootInitiate OBJECT-TYPE SYNTAX INTEGER { initiateSCR(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This OID instructs the System Controlled Reboot (SCR) subsystem to reboot all modules in the sstem if any post-AutoUpgrade reboots have been deferred. This is NOT a general system reset operation, which would constitude a serious Denial Of Service vulnerability. The SCR system will ignore all initiate requests unless the current value of adTaSysCtrlAutoUpgradeSCRStatus is ReadyForSCR." ::= { adTaSysCtrlReboot 3 } adTaSysCtrlRebootLastStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the last SCR status string. Error statuses are persistent. This string generally begin with a single-word state such as Idle, Busy, Error, and are optionally followed with a short error explanation." ::= { adTaSysCtrlReboot 4 } adTaSysCtrlRebootArmedStatus OBJECT-TYPE SYNTAX INTEGER { armed(1), notArmed(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Returns the Armed Status of the SCR one-shot. Setting the value to armed will change the status to armed. Currently, setting the value to notArmed will return an error. In the future, setting the value to notArmed could change the status to notArmed." ::= { adTaSysCtrlReboot 5 } adTaSysCtrlRebootMode OBJECT-TYPE SYNTAX INTEGER { concurrentMode(1), redundancyMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SCR reboot mode. concurrentMode will reboot cards in concurrent order, without considering redundancy status. redundancyMode will reboot cards in concurrent order, but also take into account redundancy status: reboot offline and non-redundant cards in the first pass, wait for all rebooted cards to come back up, then reboot online cards in the second pass. The default value is concurrentMode." DEFVAL { concurrentMode } ::= { adTaSysCtrlReboot 6 } -- -- Alarm Severity -- adTASysCtrlAlarmSeverityLevel OBJECT-TYPE SYNTAX INTEGER { none(1), info(2), alert(3), minor(4), major(5), critical(6) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The highest active alarm severity level. Deprecated, please use adTaAlarmMasterSeverityLevel." ::= { adTaSysCtrlShelf 4 } adTASysConfigurationChangeTimer OBJECT-TYPE SYNTAX INTEGER (0..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "The frequency an alarm will be sent if a change occurs on the system." ::= { adTaSysCtrlShelf 6 } adTASysLastConfigChangeAlarmTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The last time the alarm was generated." ::= { adTaSysCtrlShelf 8 } -- ******************************************************************************** -- -- File Export adTaSysCtrlFileExport - adTaSysCtrlGeneralFileExport - adTaSysCtrlSystemLog -- adTASystemEventLogAutoExportMode OBJECT-TYPE SYNTAX INTEGER { autoExportAt90PercentFull(1), -- Export when the System Log is 90 percent full autoExportAtScheduledTime(2), -- Export at the specified time autoExportDisabled(3) -- Auto export is disabled. } MAX-ACCESS read-write STATUS current DESCRIPTION "System log auto export mode.." ::= { adTaSysCtrlSystemLog 1 } adTaSystemEventLogPreventFileOverlap OBJECT-TYPE SYNTAX INTEGER { enabled(1), -- enable feature to prevent file overlap disabled(2) -- disabled } MAX-ACCESS read-write STATUS current DESCRIPTION "Prevent sending an event in the system log more than once." ::= { adTaSysCtrlSystemLog 3 } adTaSystemEventLogFilePrefix OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "The prefix added to make the system log file name." ::= { adTaSysCtrlSystemLog 5 } adTaSystemEventLogFileSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "The suffix added to make the system log file name." ::= { adTaSysCtrlSystemLog 7 } adTaSystemEventLogRemoteDirectory OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The remote directory on the severe where the system log file is exported to." ::= { adTaSysCtrlSystemLog 9 } adTaSystemEventLogRemoteFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote file name on the severe where the system log file is exported to." ::= { adTaSysCtrlSystemLog 11 } adTaSystemEventLogAutoExportNumberOfDays OBJECT-TYPE SYNTAX INTEGER (0..90) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of days before the system log is exported. (Military Time/24 hour time)" ::= { adTaSysCtrlSystemLog 13 } adTaSystemEventLogHourOfDayToExportSysLog OBJECT-TYPE SYNTAX INTEGER (0..23) MAX-ACCESS read-write STATUS current DESCRIPTION "The hour of the day to export system Log." ::= { adTaSysCtrlSystemLog 15 } adTaSystemEventLogMinuteOfDayToExportSysLog OBJECT-TYPE SYNTAX INTEGER (0..59) MAX-ACCESS read-write STATUS current DESCRIPTION "The hour of the day to export system Log." ::= { adTaSysCtrlSystemLog 17 } adTaSystemEventLogExportRetries OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of retries to export system event log." ::= { adTaSysCtrlSystemLog 19 } adTaSystemEventLogRemotetHost OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The remote file Host. This OID is deprecated. Use adTaSystemEventLogRemotetHostInetAddress to set IPv4 and IPv6 address." ::= { adTaSysCtrlSystemLog 21 } adTaSystemEventLogPrevExportTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the last system log export." ::= { adTaSysCtrlSystemLog 23 } adTaSystemEventLogPrevExportStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The previous export status." ::= { adTaSysCtrlSystemLog 25 } adTaSystemEventLogNextAutoExportScheduled OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The information about the next system log auto export." ::= { adTaSysCtrlSystemLog 27 } adTaSystemEventLogManualExport OBJECT-TYPE SYNTAX INTEGER { exportFullSystemLog(1), -- Export full system log exportUnsentEvents(2) -- Export all events that have not been exported } MAX-ACCESS read-write STATUS current DESCRIPTION "Manual export of system log." ::= { adTaSysCtrlSystemLog 29 } adTaSystemEventLogCurrentStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current export status." ::= { adTaSysCtrlSystemLog 31 } adTaSystemEventLogRemotetHostInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The remote file Host address type (Ipv6 or Ipv4)." ::= { adTaSysCtrlSystemLog 32 } adTaSystemEventLogRemotetHostInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The remote file Host address (Ipv6 or Ipv4). Backwards compatibility: Setting this address to a IPv4 address will update adTaSystemEventLogRemotetHost provision address with the new value. Setting this address to an IPV6 will leave adTaSystemEventLogRemotetHost as is." ::= { adTaSysCtrlSystemLog 33 } -- *********************************************************** adTaGenExportRemotetHost OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The remote file name. This OID is deprecated. Use adTaGenExportRemotetHostInetAddress to set IPv4 and IPv6 address." ::= { adTaSysCtrlGeneralFileExport 1 } adTaGeneralExportRemoteHostMethod OBJECT-TYPE SYNTAX INTEGER { ftmTFTP(1), ftmFTOT(2), ftmFTP(3), ftmSFTP(4), ftmLFFS(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "File transfer method to use to transfer General Export files from the controller. ftmTFTP(1) indicates TFTP transfer protocol. ftmFTOT(2) indicates FTOT transfer protocol. ftmFTP(3) indicates FTP transfer protocol. ftmSFTP(4) indicates SFTP transfer protocol. ftmLFFS(5) indicates Local Flash File System for OPTI-6100 SCM2 only." ::= { adTaSysCtrlGeneralFileExport 2 } adTaGenExportRemoteFilePath OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The remote file name on the severe where the system log file is exported to." ::= { adTaSysCtrlGeneralFileExport 3 } adTaGenExportStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The previous export status." ::= { adTaSysCtrlGeneralFileExport 5 } adTaGenExportFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last file exported." ::= { adTaSysCtrlGeneralFileExport 7 } adTaGeneralExportRetries OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of retries to export file." ::= { adTaSysCtrlGeneralFileExport 9 } adTaGenExportPrefixString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "A prefix to add to the General File Export file name received by the line card." ::= { adTaSysCtrlGeneralFileExport 11 } adTaGenExportSuffixString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "A suffix to add to the General File Export file name received by the line card." ::= { adTaSysCtrlGeneralFileExport 12 } adTaGenExportExceptionReportEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable automatically generated exception reports. Manually generated reports are always enabled." ::= { adTaSysCtrlGeneralFileExport 14 } adTaGenExportRemotetHostInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The remote file server address InetAddress Type." ::= { adTaSysCtrlGeneralFileExport 15 } adTaGenExportRemotetHostInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The general export remote file Sever address. Backwards compatibility: Setting this address to a IPv4 address will update adTaGenExportRemotetHost provision address with the new value. Setting this address to an IPV6 will leave adTaGenExportRemotetHost as is." ::= { adTaSysCtrlGeneralFileExport 16 } -- ************************************************************************************ adTaSntpServer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The remote SNTP Server." ::= { adTaSysCtrlSNTP 1 } adTaDSTAutomaticAdjustment OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- SNTP DST disabled enabled(2), -- SNTP DST enabled pre2007Adjustment(3) -- SNTP DST enable Pre 2007, } MAX-ACCESS read-write STATUS current DESCRIPTION "This option sets automatic adjustment for North American daylight saving time. Available values are Enabled and Disabled. The default value is Enabled." ::= { adTaSysCtrlSNTP 3 } adTaLocalTimeZone OBJECT-TYPE SYNTAX INTEGER { hawaii(1), -- SNTP TIMEZONE HAWAII alaska(2), -- SNTP TIMEZONE ALASKA, pacific(3), -- SNTP TIMEZONE PACIFIC, mountain(4), -- SNTP TIMEZONE MOUNTAIN, central(5), -- SNTP TIMEZONE CENTRAL, eastern(6), -- SNTP TIMEZONE EASTERN, atlantic(7) -- SNTP TIMEZONE ATLANTIC, } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This option sets the time zone in which the MX2800 unit is located. Possible values consist of North American time zones from Hawaii-Aleutian Standard Time to Atlantic Standard Time. The default value is Eastern Standard Time." ::= { adTaSysCtrlSNTP 5 } adTaRefreshPeriod OBJECT-TYPE SYNTAX INTEGER { oneMinute(1), fiveMinute(2), tenMinute(3), fifteenMinute(4), twentyMinute(5), twentyFiveMinute(6), thirtyMinute(7), thirtyFiveMinute(8), fortyMinute(9), fortyFiveMinute(10), fiftyMinute(11), fiftyFiveMinute(12), sixtyMinute(13) } MAX-ACCESS read-write STATUS current DESCRIPTION "This option sets the length of time between queries to the server. The available values range from 1 minute to 60 minutes at 5-minute increments. The default value is 5 minutes." ::= { adTaSysCtrlSNTP 7 } adTaTimeProtocolState OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- sntp mode disabled, sntp(2), -- sntp netTime(3) -- Net Time } MAX-ACCESS read-write STATUS current DESCRIPTION "This option sets the mode or protocol used to retrieve the date and time from the server. Possible values are Disabled, SNTP, and Net Time. When the State option is set to Disabled, then the user should explicitly set the date and time locally (via menus, TL1, or SNMP). If the State option is set to SNTP or Net Time, then the product prevents any attempt to set the time locally. The default value is Disabled." ::= { adTaSysCtrlSNTP 9 } adTaSntpOperationStaus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "SNTP operations status." ::= { adTaSysCtrlSNTP 11 } adTaSntpTimeOutCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A running time out count of SNTP Server1. This count is reset to zero if the server is changed." ::= { adTaSysCtrlSNTP 13 } adTaSntpGMTtimeZoneString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This OID will set the Time Zone Offset. This setting will override the adTaLocalTimeZoneGMToffset OID in the Controller. ** Format: (GMT[+,-][00-23]:[00-59])Time Zone Name/Alias/Description. Time Zone Name 0 - 55 characters. ** Example:(GMT-06:00)Central Time Example:(GMT-00:00) No Offset Example:(GMT+00:00) Greenwich Mean Time : London Example:(GMT+00:00) Greenwich Mean Time : London Example:(GMT+02:00) Amman Example:(GMT-04:30) Caracas Example:(GMT+04:45) Kathmandu " ::= { adTaSysCtrlSNTP 15 } adTaSntpServer2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The remote SNTP redundant Server 2." ::= { adTaSysCtrlSNTP 17 } adTaSntpServer3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The remote SNTP redundant Server 3." ::= { adTaSysCtrlSNTP 18 } adTaSntpServer4 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The remote SNTP redundant Server 4." ::= { adTaSysCtrlSNTP 19 } adTaSntpTimeOutProv OBJECT-TYPE SYNTAX Integer32 (0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP wait time before it times out. The number of seconds before SNTP message time out." ::= { adTaSysCtrlSNTP 21 } adTaSntpTimeRetryProv OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP retry. The number of times to retry a SNTP request each server. to a SNTP server." ::= { adTaSysCtrlSNTP 23 } adTaSntpTimeOutCountServer2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A running time out count of SNTP Server2. This count is reset to zero if the server is changed." ::= { adTaSysCtrlSNTP 25 } adTaSntpTimeOutCountServer3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A running time out count of SNTP Server3. This count is reset to zero if the server is changed." ::= { adTaSysCtrlSNTP 26 } adTaSntpTimeOutCountServer4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A running time out count of SNTP Server4. This count is reset to zero if the server is changed." ::= { adTaSysCtrlSNTP 27 } adTaSntpCurrentServer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current server being used. Server 1 to 4." ::= { adTaSysCtrlSNTP 29 } -- ******************************************************************************** -- -- syslog Protocol -- In its most simplistic terms, the syslog protocol provides a -- transport to allow a machine to send event notification messages -- across IP networks to event message collectors - also known as syslog -- servers. -- adTaSysLogServer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The remote SysLog Server. This OID is deprecated for support of IPv6. Use adTaSysLogServerNetAddress." ::= { adTaSysLog 1 } adTaSysLogServer2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The second remote SysLog Server." ::= { adTaSysLog 2 } adTaSysLogMode OBJECT-TYPE SYNTAX INTEGER { enableSysLog(1), -- syslog mode enabled disableSysLog(2) -- syslog mode disabled } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable SysLog feature." ::= { adTaSysLog 3} -- Send system event log events on the controller to RFC 3164 syslog clients adTaExportCtrlToSysLog OBJECT-TYPE SYNTAX INTEGER { exportSystemEventToSyslogServer(1) -- send System Event Log Entries to SysLog } MAX-ACCESS read-write STATUS current DESCRIPTION "Send the system event log entries to syslog client (RFC 3164 syslog clients)." ::= { adTaSysLog 4} adTaSysLogServer3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The third remote SysLog Server 3." ::= { adTaSysLog 6 } adTaSysLogServer4 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The fourth remote SysLog Server." ::= { adTaSysLog 7 } -- -- the adTaSysLogServer Translation table -- adTaSysLogServerTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTaSysLogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Remote SysLog Server Table" ::= { adTaSysLog 10 } adTaSysLogServerEntry OBJECT-TYPE SYNTAX AdTaSysLogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains one Remote SysLog Server." INDEX { adTaSysLogServerIndex} ::= { adTaSysLogServerTable 1 } AdTaSysLogServerEntry ::= SEQUENCE { adTaSysLogServerIndex Integer32, adTaSysLogServerAddressType InetAddressType, adTaSysLogServerInetAddress InetAddress } adTaSysLogServerIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies Remote SysLog Server 1 to 4" ::= { adTaSysLogServerEntry 1 } adTaSysLogServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of adTaSysLogServerInetAddress." ::= { adTaSysLogServerEntry 2 } adTaSysLogServerInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Remote SysLog Server address." ::= { adTaSysLogServerEntry 3 } -- *********************************************************************************** -- -- TA System Controller DHCP Server Configuration -- -- adTaDhcpNetworkInterface OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex of the Controller Ethernet interface that the DHCP server runs on." ::= { adTaDhcpServer 10} adTaDhcpSubNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Netmask of the DHCP interface address. A subnet mask defines how many bits of an IP address to use for the network/subnet ID and how many bits to use for the Host ID." ::= { adTaDhcpServer 12} adTaDhcpSubNetLength OBJECT-TYPE SYNTAX INTEGER (24..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask by length. See adTaDhcpSubNetMask." ::= { adTaDhcpServer 14} adTaDhcpStartIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Send the system event log entries to syslog client (RFC 3164 syslog clients)." ::= { adTaDhcpServer 16} adTaDhcpEndIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Send the system event log entries to syslog client (RFC 3164 syslog clients)." ::= { adTaDhcpServer 18} adTaDhcpSubNetAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A subnet IP Address." ::= { adTaDhcpServer 20} adTaDhcpLeasDurationHours OBJECT-TYPE SYNTAX INTEGER (0..24) MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP lease duration hours. If hours and minutes are set to zero the DHCP lease duration will be set to one hour. The minimum lease duration will be 300 seconds." ::= { adTaDhcpServer 22} adTaDhcpLeasDurationMintues OBJECT-TYPE SYNTAX INTEGER (0..59) MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP lease duration minutes. If hours and minutes are set to zero the DHCP lease duration will be set to one hour. The minimum lease duration will be 300 seconds." ::= { adTaDhcpServer 24} adTaDhcpServerCommands OBJECT-TYPE SYNTAX INTEGER { startDhcpServer(1), stopDhcpServer(2), dhcpNoCommand(999) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Server command. startDhcpServer - restart DHCP server. Only if the server was stoped. stopDhcpServer - Stop the DhcpServer if it is running. dhcpNoCommand - no Command was performed performed." ::= { adTaDhcpServer 26} adTaDhcpServerOperationStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The DHCP server status." ::= { adTaDhcpServer 28} -- DHCP status Table adTaDhcpServerStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AdTaDhcpServerStatusTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { adTaDhcpServer 40 } adTaDhcpServerStatusTableEntry OBJECT-TYPE SYNTAX AdTaDhcpServerStatusTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { adTaSysCtrlSrmReleaseIndex, adTaSysCtrlSrmRlsFilesIndex } ::= { adTaDhcpServerStatusTable 1 } AdTaDhcpServerStatusTableEntry ::= SEQUENCE { adTaDhcpServerStatusIndex Integer32, adTaDhcpServerStatus DisplayString } adTaDhcpServerStatusIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index for a DHCP Server Status." ::= { adTaDhcpServerStatusTableEntry 1 } adTaDhcpServerStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..200)) MAX-ACCESS read-only STATUS current DESCRIPTION "Dhcp Server Status." ::= { adTaDhcpServerStatusTableEntry 4} -- *********************************************************************************** adTaSSLKeySizeBits OBJECT-TYPE SYNTAX INTEGER { bits512(512), bits1024(1024), bits2048(2048) } MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the key size in bits. If not specified then 1024 is used." ::= { adTaSSLConfiguration 5} adTaSSLKeyType OBJECT-TYPE SYNTAX INTEGER { rsa(1), dsa(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SSL key type to generate and use." ::= { adTaSSLConfiguration 7} adTaSSLInputPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(4..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The passwords for the input private key file." ::= { adTaSSLConfiguration 9} adTaSSLOutputPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(4..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The passwords for the output private key file." ::= { adTaSSLConfiguration 11} adTaSSLCertificateCountry OBJECT-TYPE SYNTAX DisplayString (SIZE(2..2)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL certificate country." ::= { adTaSSLConfiguration 13} adTaSSLCertificateStateOrProvince OBJECT-TYPE SYNTAX DisplayString (SIZE(2..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL certificate State or Province." ::= { adTaSSLConfiguration 15} adTaSSLCertificateChallengePassword OBJECT-TYPE SYNTAX DisplayString (SIZE(4..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL challenge password." ::= { adTaSSLConfiguration 17} adTaSSLCertificateLocality OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL certificate Locality (eg, city)." ::= { adTaSSLConfiguration 19} adTaSSLCertificateOrganization OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL certificate Organization." ::= { adTaSSLConfiguration 21} adTaSSLCertificateOrganizationalUnitName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL certificate Organization Unit Name." ::= { adTaSSLConfiguration 23} adTaSSLCertificateCommonName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL Common Name (e.g., fully qualified domain name of the server to be secured)'' since, the common name generally corresponds to the server's name when generating certificates." ::= { adTaSSLConfiguration 25} adTaSSLCertificateEmailAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL Email address of the SSL certificate distinguished name" ::= { adTaSSLConfiguration 27} adTaGenerateNewSSLKeys OBJECT-TYPE SYNTAX INTEGER { generateNewSSLKeys(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the controller and genrerate new SSL keys using the current settings." ::= { adTaSSLConfiguration 29} adTaGenerateNewSSLCertificateRequest OBJECT-TYPE SYNTAX INTEGER { generateNewSSLCertRequest(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Initiate generation of a new SSL Certificate Request." ::= { adTaSSLConfiguration 30} adTaSSLuseImportCertificate OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to disable, the controller will use the self-signed certificate. When set to enable, the controller will use the imported signed certificate (if available). Changing this setting will intiate a controller reboot." ::= { adTaSSLConfiguration 31} -- *********************************************** adTaSSLRemotePrivateKeyFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL Remote Private key file name to download. This file will replace the controller generated SSL Private Key File." ::= { adTaSSLRemoteKeyDownload 3} adTaSSLRemotedPublicKeyFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL Remote Private key file name to download. This file will replace the controller generated SSL Public Key File." ::= { adTaSSLRemoteKeyDownload 5} adTaSSLRemoteCertificateFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL Remote Private key file name to download. This file will replace the controller generated SSL self signed Certificate Key File." ::= { adTaSSLRemoteKeyDownload 7} adTaSSLRemoteKeysDownLoadStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SSL Remote keys download status." ::= { adTaSSLRemoteKeyDownload 8} adTaSSLCertificateRequestFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "File name to use while exporting a certificate request." ::= { adTaSSLRemoteKeyDownload 9} adTaSSLCertificateRequestExport OBJECT-TYPE SYNTAX INTEGER { exportSSLCertificateRequest(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to initiate an certificate request export." ::= { adTaSSLRemoteKeyDownload 10} adTaSSLCertificateImport OBJECT-TYPE SYNTAX INTEGER { importSSLCertificate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Initiate the import operation for the signed certificate. The file indicated by adTaSSLRemoteCertificateFileName will be transferred to the controller using the selected designated file server, protocol, and credentials specified in the controller provisioning." ::= { adTaSSLRemoteKeyDownload 11} adTaSSLCertificateImportStatus OBJECT-TYPE SYNTAX INTEGER { ready(1), notReady(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "SSL Certificate Import status. This status indicates whether or not a certificate was imported successfully and is ready to be used, if desired." ::= { adTaSSLRemoteKeyDownload 12} adTaSSLDownLoadRemoteKeys OBJECT-TYPE SYNTAX INTEGER { downloadRemoteSSLKeys(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "SSL key type to generate and use." ::= { adTaSSLRemoteKeyDownload 13} adTaSSLCertificateSigningRequestStatus OBJECT-TYPE SYNTAX INTEGER { ready(1), notReady(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "SSL Certificate Signing Request Status. This status Indicates whether a certificate signing request is ready and available for export." ::= { adTaSSLRemoteKeyDownload 14} adTaSSLCertificateSignRequestExportStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This OID will return a formatted string describing the most recent SSL Certificate Signing Request Remote File Export operation status." ::= { adTaSSLRemoteKeyDownload 15} adTaSSLSignedCertificateImportStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This OID will return a formatted string describing the most recent SSL Signed Certificate Remote File Import operation status." ::= { adTaSSLRemoteKeyDownload 16} -- -- Inband management VLAN bridging -- adTaSysCtrlVLANBridgeMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable VLAN bridging mode." ::= { adTaSysCtrlVLANBridge 1 } adTaSysCtrlVLANBridgeInterface OBJECT-TYPE SYNTAX INTEGER { enet(1), enet2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Select the interface to perform bridging." ::= { adTaSysCtrlVLANBridge 2 } -- *********************************************************************************** -- -- TA System Module Reset Control -- -- Operating Instructions: -- -- 0. We recommended that you first confirm all modules have been fully -- discovered and are stable by querying the standard GenSlot oids -- for every module in the system. -- -- 1. Confirm the ModuleReset subsystem is in an idle/error state by -- reading the 'adTaModuleResetCtrl' oid. -- -- 2. Write the 'RESERVE' (549) command to 'adTaModuleResetCtrl' oid. -- -- 3. Confirm 'RESERVED' (1) state by reading 'adTaModuleResetCtrl' oid. -- -- 4. Write the SNMP slot number to be reset to 'adTaModuleResetSlot'. -- Note: 0 = reset all modules EXCEPT the controller. -- -1 = reset all modules AND the controller. -- -- 5. Confirm the 'ARMED' (3) state by reading 'adTaModuleResetCtrl' oid -- Note: may return 'BUSY' (2) for several seconds while we scan -- modules to determine capability/state. -- Note: operation may abort with 'NOT_SUPPORTED' (101) if we are -- told to reset a single module that does not support the -- RESET-DID or if any slot reports a BUSY state. -- Note: An error status will be returned if an invalid slot number -- is supplied or any other error condition is detected. -- -- 6. Do not proceed to the next step until a read of -- 'adTaModuleResetCtrl' returns the 'ARMED' (3) state. -- -- 7. Write 'COMMIT' (666) command to 'adTaModuleResetCtrl' oid. -- -- 8. Confirm 'RESETTING' (4) state by reading 'adTaModuleResetCtrl' oid. -- -- Note: any deviation from this sequence may abort the entire operation and -- return an 'ABORTED' (102) status to a 'adTaModuleResetCtrl' query. -- -- Note: The I/O values for adTaModuleResetCtrl may be thought of an an enumerated -- set. Since zero (0) is used, its not technically a valid SNMP V1 enum, -- (it IS a valid SNMP V2 enum) so the values are represented as plain integers. -- -- { -- adTaModuleResetIdle(0), -- adTaModuleResetReserved(1), -- adTaModuleResetBusy(2), -- adTaModuleResetArmed(3), -- adTaModuleResetResetting(4), -- -- adTaModuleResetErrors(100), -- adTaModuleResetNotSupported(101), -- adTaModuleResetAborted(102), -- -- adTaModuleResetCommands(500), -- adTaModuleResetReserve(549), -- adTaModuleResetCommit(666) -- } -- -- *********************************************************************************** adTaModuleResetSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP slot number of module to be reset, else 0 (zero) if all modules should be reset except the controller, -1 if all modules should be reset including controller. This OID must be used in conjunction with the adTaModuleResetCtrl OID, refer to the above description for details." ::= { adTaModuleReset 10} adTaModuleResetCtrl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This OID must be used in conjunction with the adTaModuleResetSlot OID, refer to the above description for details." ::= { adTaModuleReset 12} -- *********************************************************************************** -- -- TA System Traps Varbinds -- adTaDataLossDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description of SCM data loss or coruption." ::= { adTaSysAlarmVarbinds 3} -- *********************************************************************************** -- -- TA System Controller Traps -- adTaControllerMgmtTraps OBJECT IDENTIFIER ::= { adTaControllerMgmt 0 } -- -- service state msg fail alarms -- adTASetSingleServiceStateMsgFail NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adGenPortTrapIdentifier, adGenSlotProdName } STATUS current DESCRIPTION "Set single service state msg fail." --#TYPE "Warning - set single service state msg fail" --#SUMMARY "adTaControllerMgmtTraps 1006301: set single service state msg failed at slot %d.;" --#SUMMARY "detected at chassis: %s" --#ARGUMENTS { 2,1} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Set Single Service State Msg Failure" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006301} adTAGetSingleServiceStateMsgFail NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adGenPortTrapIdentifier, adGenSlotProdName } STATUS current DESCRIPTION "Get single service state msg fail." --#TYPE "Warning - get single service state msg fail" --#SUMMARY "adTaControllerMgmtTraps 1006303: get single service state msg failed at slot %d.;" --#SUMMARY "detected at chassis: %s" --#ARGUMENTS { 2,1} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Get Single Service State Msg Failure" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006303} adTASetAllServiceStateMsgFail NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adGenPortTrapIdentifier, adGenSlotProdName } STATUS current DESCRIPTION "Set all service state msg fail." --#TYPE "Warning - set all service state msg fail" --#SUMMARY "adTaControllerMgmtTraps 1006305: set all service state msg failed at slot %d.;" --#SUMMARY "detected at chassis: %s" --#ARGUMENTS { 2,1} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Set all Service State Msg Failure" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006305} adTAGetAllServiceStateMsgFail NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adGenPortTrapIdentifier, adGenSlotProdName } STATUS current DESCRIPTION "Get all service state msg fail." --#TYPE "Warning - get all service state msg fail" --#SUMMARY "adTaControllerMgmtTraps 1006307: get all service state msg failed at slot %d." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS { 2,1} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Get all Service State Msg Failure" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006307} -- -- relay test alarms -- adTACriticalAudibleRelayTestClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Critical Audible Relay clear alarm." --#TYPE "Warning - Alarm Relay Test. Toggle Critical Audible Relay Clear" --#SUMMARY "adTaControllerMgmtTraps 1006308: Menu Toggle Critical Audible Relay Clear alarm." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006308} adTACriticalAudibleRelayTestActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Critical Audible Relay active alarm." --#TYPE "Warning - Alarm Relay Test. Toggle Critical Audible Relay active alarm" --#SUMMARY "adTaControllerMgmtTraps 1006309: Menu Toggle Critical Audible Relay active alarm." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006309} adTACriticalVisualRelayTestClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Critical Visual Relay clear alarm." --#TYPE "Warning - Alarm Relay Test. Toggle Critical Visual Relay clear alarm" --#SUMMARY "adTaControllerMgmtTraps 1006310: Menu Toggle Critical Visual Relay clear alarm." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006310} adTACriticalVisualRelayTestActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Critical Visual Relay active alarm." --#TYPE "Warning - Alarm Relay Test. Toggle Critical Visual Relay active alarm." --#SUMMARY "adTaControllerMgmtTraps 1006311: Menu Alarm Relay Test. Toggle Critical Visual Relay active alarm." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY CRITICAL --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTaControllerMgmtTraps 1006311 } adTAMajAudibleRelayTestClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Major Audible Relay alarm clear." --#TYPE "Warning - Alarm Relay Test. Toggle Major Audible Relay alarm clear." --#SUMMARY "adTaControllerMgmtTraps 1006312: Menu Alarm Relay Test. Toggle Major Audible Relay alarm clear." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006312} adTAMajAudibleRelayTestActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Major Audible Relay alarm active." --#TYPE "Warning - Alarm Relay Test. Toggle Major Audible Relay alarm active." --#SUMMARY "adTaControllerMgmtTraps 1006313: Menu Alarm Relay Test. Toggle Major Audible Relay alarm active." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006313} adTAMajVisualRelayTestClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Major Visual Relay alarm clear." --#TYPE "Warning - Alarm Relay Test. Toggle Major Visual Relay alarm clear." --#SUMMARY "adTaControllerMgmtTraps 1006314: Menu Alarm Relay Test. Toggle Major Visual Relay alarm clear." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006314} adTAMajVisualRelayTestActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Major Visual Relay alarm active." --#TYPE "Warning - Alarm Relay Test. Toggle Major Visual Relay alarm active." --#SUMMARY "adTaControllerMgmtTraps 1006315: Menu Alarm Relay Test. Toggle Major Visual Relay alarm active." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006315} adTAMinorAudibleRelayTestClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Minor Audible Relay alarm clear." --#TYPE "Warning - Alarm Relay Test. Toggle Minor Audible Relay alarm clear." --#SUMMARY "adTaControllerMgmtTraps 1006316: Menu Alarm Relay Test. Toggle Minor Audible Relay alarm clear." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006316} adTAMinorAudibleRelayTestActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Minor Audible Relay alarm active." --#TYPE "Warning - Alarm Relay Test. Toggle Minor Audible Relay alarm active." --#SUMMARY "adTaControllerMgmtTraps 1006317: Menu Alarm Relay Test. Toggle Minor Audible Relay alarm active." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006317} adTAMinorVisualRelayTestClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Minor Visual Relay alarm clear." --#TYPE "Warning - Alarm Relay Test. Toggle Minor Visual Relay alarm clear." --#SUMMARY "adTaControllerMgmtTraps 1006318: Menu Alarm Relay Test. Toggle Minor Visual Relay alarm clear." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006318} adTAMinorVisualRelayTestActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Minor Visual Relay alarm active active." --#TYPE "Warning - Alarm Relay Test. Toggle Minor Visual Relay alarm active active." --#SUMMARY "adTaControllerMgmtTraps 1006319: Menu Alarm Relay Test. Toggle Minor Visual Relay alarm active active." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006319} adTAAux1RelayTestClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm clear." --#TYPE "Warning - Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm clear." --#SUMMARY "adTaControllerMgmtTraps 1006320: Menu Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm clear." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006320} adTAAux1RelayTestActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm active." --#TYPE "Warning - Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm active." --#SUMMARY "adTaControllerMgmtTraps 1006321: Menu Alarm Relay Test. Toggle Auxiliary #1 Relay Active alarm active." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006321} adTAAux2RelayTestClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm clear." --#TYPE "Warning - Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm clear." --#SUMMARY "adTaControllerMgmtTraps 1006322: Menu Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm clear." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006322} adTAAux2RelayTestActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName } STATUS current DESCRIPTION "Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm active." --#TYPE "Warning - Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm active." --#SUMMARY "adTaControllerMgmtTraps 1006323: Menu Alarm Relay Test. Toggle Auxiliary #2 Relay Active alarm active." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS {1} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Alarm Relay Test" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006323} -- -- clei code alarms -- adTACleiCodeMisMatchClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adGenSlotProdName, adGenSlotProdCLEIcode } STATUS current DESCRIPTION "CLEI code mis-match clear" --#TYPE "Warning - CLEI code mis-match" --#SUMMARY "adTaControllerMgmtTraps 1006324: CLEI code mis-match clear at slot %d." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS { 2,1} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Card Insertion" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006324} adTACleiCodeMisMatch NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adGenSlotProdName, adGenSlotProdCLEIcode } STATUS current DESCRIPTION "CLEI code mis-match." --#TYPE "Warning - CLEI code mis-match" --#SUMMARY "adTaControllerMgmtTraps 1006325: CLEI code mis-match at slot %d." --#SUMMARY "detected at chassis: %s" --#ARGUMENTS { 2,1} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Card Insertion" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006325} -- -- power shedding alarms -- adTAPowerSheddingInputDeAsserted NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTASysCtrlPowerShedAlmInput, adTASysCtrlPowerShedACFailAlarmDescription, adTASysCtrlPowerShedACFailAlarmSeverity, adTASysCtrlPowerShedCountDown } STATUS current DESCRIPTION "Power Shedding Input DeAsserted" --#TYPE "Major - Power Shedding Input DeAsserted" --#SUMMARY "adTaControllerMgmtTraps 1006328: Power Shedding Input DeAsserted" --#SUMMARY "detected at chassis: %s" --#ARGUMENTS { 1 } --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Power Shedding Input DeAsserted" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006328} adTAPowerSheddingInputAsserted NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTASysCtrlPowerShedAlmInput, adTASysCtrlPowerShedACFailAlarmDescription, adTASysCtrlPowerShedACFailAlarmSeverity, adTASysCtrlPowerShedCountDown } STATUS current DESCRIPTION "Power Shedding Input Asserted" --#TYPE "Major - Power Shedding Input Asserted" --#SUMMARY "adTaControllerMgmtTraps 1006329: Power Shedding Input Asserted" --#SUMMARY "detected at chassis: %s" --#ARGUMENTS { 1 } --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Power Shedding Input Asserted" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006329} adTAPowerSheddingDeActivated NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTASysCtrlPowerShedAlmInput, adTASysCtrlPowerShedStatus, adTASysCtrlPowerShedStateAlarmSeverity } STATUS current DESCRIPTION "Power Shedding Currently Deactivated" --#TYPE "Major - Power Shedding Deactivated" --#SUMMARY "adTaControllerMgmtTraps 1006330: Power Shedding Deactivated" --#SUMMARY "detected at chassis: %s" --#ARGUMENTS { 1 } --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Power Shedding Deactivated" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006330} adTAPowerSheddingActivated NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTASysCtrlPowerShedAlmInput, adTASysCtrlPowerShedStatus, adTASysCtrlPowerShedStateAlarmSeverity } STATUS current DESCRIPTION "Power Shedding Currently Activated" --#TYPE "Major - Power Shedding Activated" --#SUMMARY "adTaControllerMgmtTraps 1006331: Power Shedding Activated" --#SUMMARY "detected at chassis: %s" --#ARGUMENTS { 1 } --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Power Shedding Activated" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006331} -- -- fan alarms -- adTAFanMPowerAFailClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTAeSCUenvAlarmUserName, adTAeSCUenvAlarmInputLevel } STATUS current DESCRIPTION "FANM Bus A Power Failure Alarm clear" --#TYPE "Informational - FANM Bus A Power Failure Alarm clear" --#SUMMARY "adTaControllerMgmtTraps 1006332: FANM Bus A Power Failure Alarm clear;" --#SUMMARY "detected at shelf: %s" --#ARGUMENTS { 1 } --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006332} adTAFanMPowerAFail NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTAeSCUenvAlarmUserName, adTAeSCUenvAlarmInputLevel } STATUS current DESCRIPTION "FANM Bus A Power Failure Alarm active" --#TYPE "Minor - FANM Bus A Power Failure Alarm active" --#SUMMARY "adTaControllerMgmtTraps 1006333: FANM Bus A Power Failure Alarm active;" --#SUMMARY "detected at shelf: %s" --#ARGUMENTS { 1 } --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006333} adTAFanMPowerBFailClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTAeSCUenvAlarmUserName, adTAeSCUenvAlarmInputLevel } STATUS current DESCRIPTION "FANM Bus B Power Failure Alarm clear" --#TYPE "Informational - FANM Bus B Power Failure Alarm clear" --#SUMMARY "adTaControllerMgmtTraps 1006334: FANM Bus B Power Failure Alarm clear;" --#SUMMARY "detected at shelf: %s" --#ARGUMENTS { 1 } --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006334} adTAFanMPowerBFail NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTAeSCUenvAlarmUserName, adTAeSCUenvAlarmInputLevel } STATUS current DESCRIPTION "FANM Bus B Power Failure Alarm active" --#TYPE "Minor - FANM Bus B Power Failure Alarm active" --#SUMMARY "adTaControllerMgmtTraps 1006335: FANM Bus B Power Failure Alarm active;" --#SUMMARY "detected at shelf: %s" --#ARGUMENTS { 1 } --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006335} -- -- System Release Management Alarms -- adTASrmActiveRlsErrorClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlSrmReleaseFilename, adTaSysCtrlSrmReleaseStatus, adTaSysCtrlSrmReleaseErrorBitmask } STATUS current DESCRIPTION "This trap is used to indicate that the previous active system release error state has cleared." --#TYPE "Warning - Active Release Error alarm clear." --#SUMMARY "adTaControllerMgmtTraps 1006340: Active Release Error alarm clear for;" --#SUMMARY "shelf: %s, release: %s, status: %s, error: %x" --#ARGUMENTS { 1, 2, 3, 4 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006340} adTASrmActiveRlsErrorActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlSrmReleaseFilename, adTaSysCtrlSrmReleaseStatus, adTaSysCtrlSrmReleaseErrorBitmask } STATUS current DESCRIPTION "This trap is used to indicate that the active system release has an error. Walking the adTaSysCtrlSysRlsFilesTable will provide more detail for which spacific files have an error." --#TYPE "Warning - Active Release Error alarm active." --#SUMMARY "adTaControllerMgmtTraps 1006341: Active Release Error alarm active for;" --#SUMMARY "shelf: %s, release: %s, status: %s, error: %x" --#ARGUMENTS { 1, 2, 3, 4 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006341} adTASrmBackupRlsErrorClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlSrmReleaseFilename, adTaSysCtrlSrmReleaseStatus, adTaSysCtrlSrmReleaseErrorBitmask } STATUS current DESCRIPTION "This trap is used to indicate that the previous backup system release error has cleared." --#TYPE "Warning - Backup Release Error alarm clear." --#SUMMARY "adTaControllerMgmtTraps 1006342: Backup Release Error alarm clear for;" --#SUMMARY "shelf: %s, release: %s, status: %s, error: %x" --#ARGUMENTS { 1, 2, 3, 4 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006342} adTASrmBackupRlsErrorActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlSrmReleaseFilename, adTaSysCtrlSrmReleaseStatus, adTaSysCtrlSrmReleaseErrorBitmask } STATUS current DESCRIPTION "This trap is used to indicate that the backup system release has an error. Walking the adTaSysCtrlSysRlsFilesTable will provide more detail for which specific files have an error." --#TYPE "Warning - Backup Release Error alarm active." --#SUMMARY "adTaControllerMgmtTraps 1006343: Backup Release Error alarm active for;" --#SUMMARY "shelf: %s, release: %s, status: %s, error: %d" --#ARGUMENTS { 1, 2, 3, 4 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006343} adTASrmNewActiveRelease NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlSrmReleaseFilename } STATUS current DESCRIPTION "This trap is used to indicate that there is a new active system release, and the activate backup system release operation has successfully completed." --#TYPE "Warning - New Active System Release." --#SUMMARY "adTaControllerMgmtTraps 1006344: New Active System Release;" --#SUMMARY "shelf: %s, active release: %s" --#ARGUMENTS { 1, 2 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006344} adTASrmRlsDownloadStarted NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlSrmDownloadFilename } STATUS current DESCRIPTION "This trap is used to indicate that a system release download operation has been started." --#TYPE "Warning - System Release download operation started." --#SUMMARY "adTaControllerMgmtTraps 1006346: System Release download operation started;" --#SUMMARY "started at shelf: %s, release: %s" --#ARGUMENTS { 1, 2 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006346} adTASrmRlsDownloadCompleted NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlSrmDownloadFilename } STATUS current DESCRIPTION "This trap is used to indicate that a system release download operation has successfully completed." --#TYPE "Warning - System Release download operation has successfully completed." --#SUMMARY "adTaControllerMgmtTraps 1006348: System Release download operation has successfully completed;" --#SUMMARY "completed at shelf: %s, release: %s" --#ARGUMENTS { 1, 2 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006348} adTASrmRlsDownloadFailed NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlSrmDownloadFilename, adTaSysCtrlSrmStatus } STATUS current DESCRIPTION "This trap is used to indicate that a system release download operation has failed. The EMS should perform a 'get' on the adTaSysCtrlSrmStatus OID for further information regarding the error condition." --#TYPE "Warning - System Release download operation has failed." --#SUMMARY "adTaControllerMgmtTraps 1006350: System release download operation has failed;" --#SUMMARY "failed at shelf: %s, release: %s, (%s)" --#ARGUMENTS { 1, 2, 3 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006350} adTASrmRlsBackupStarted NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlSrmReleaseFilename } STATUS current DESCRIPTION "This trap is used to indicate that an Active system release backup operation has been started." --#TYPE "Warning - Active Release backup operation started." --#SUMMARY "adTaControllerMgmtTraps 1006352: Active Release backup operation started;" --#SUMMARY "started at shelf: %s, release: %s" --#ARGUMENTS { 1, 2 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006352} adTASrmRlsBackupCompleted NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlSrmReleaseFilename } STATUS current DESCRIPTION "This trap is used to indicate that an Active system release backup operation has successfully completed." --#TYPE "Warning - Active Release backup operation has successfully completed." --#SUMMARY "adTaControllerMgmtTraps 1006354: Active Release backup operation has successfully completed;" --#SUMMARY "completed at shelf: %s, release: %s" --#ARGUMENTS { 1, 2 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006354} adTASrmRlsBackupFailed NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlSrmReleaseFilename, adTaSysCtrlSrmStatus } STATUS current DESCRIPTION "This trap is used to indicate that an Active system release backup operation has failed. The EMS should perform a 'get' on the adTaSysCtrlSrmStatus OID for further information regarding the error condition." --#TYPE "Warning - Active Release backup operation has failed." --#SUMMARY "adTaControllerMgmtTraps 1006356: Active Release backup operation has failed;" --#SUMMARY "failed at shelf: %s, release: %s, (%s)" --#ARGUMENTS { 1, 2, 3 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Information Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006356} -- -- Alarm Severity -- adTASysCtrlAlarmSeverityChanged NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTASysCtrlAlarmSeverityLevel } STATUS current DESCRIPTION "The highest active alarm severity has changed." --#TYPE "Informational - The highest active alarm severity has changed." --#SUMMARY "detected at shelf: %s" --#ARGUMENTS { 1 } --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006359} -- -- Device Com Fail Alarm -- adTASysCtrlDeviceComFail NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adTAeSCUTrapAlarmLevel } STATUS current DESCRIPTION "This trap indicates that an RS485 client has failed to respond." --#TYPE "Major - An RS485 client has failed to respond." --#SUMMARY "An RS485 client has failed to respond to host: %s" --#SUMMARY "" --#ARGUMENTS { 1 } --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006360} -- -- SWDNLD -- adTASysCtrlSwdnldStarted NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adTAeSCUTrapAlarmLevel } STATUS current DESCRIPTION "Software download started." --#TYPE "Informational - A software download has been initiated by a TL1 command." --#SUMMARY "Detected at shelf: %s" --#ARGUMENTS { 1 } --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Status Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006363} adTASysCtrlSwdnldComplete NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adTAeSCUTrapAlarmLevel } STATUS current DESCRIPTION "Software download complete." --#TYPE "Informational - A TL1 initiated software download has completed." --#SUMMARY "Detected at shelf: %s" --#ARGUMENTS { 1 } --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Status Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006365} adTASysCtrlSwdnldFailure NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adTAeSCUTrapAlarmLevel } STATUS current DESCRIPTION "Software download failure." --#TYPE "Informational - A TL1 initiated software download has failed." --#SUMMARY "Detected at shelf: %s" --#ARGUMENTS { 1 } --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Status Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006367} -- -- System Controlled Reboot Traps -- adTaSysCtrlRebootTraps OBJECT IDENTIFIER ::= { adTaSysCtrlReboot 0 } adTaSysCtrlRebootException NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaSysCtrlRebootLastStatus } STATUS current DESCRIPTION "System Controlled Reboot exception." --#TYPE "Informational - System Controlled Reboot operation could not be initiated or failed." --#SUMMARY "detected at shelf: %s, status: %s" --#ARGUMENTS { 1, 2 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaSysCtrlRebootTraps 1006368} -- adTaSysCtrlSNMPProvChange NOTIFICATION-TYPE --::= 1006370 -- Do not use 1006370 for a trap number this is reserved for adTaSysCtrlSNMPProvChange -- !!! Do not use 1006370 for a trap number this is reserved for adTaSysCtrlSNMPProvChange -- -- System Data Error -- adTAeSysSystemDataError NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTaDataLossDescription } STATUS current DESCRIPTION "System Data Loss exception." --#TYPE "Informational - Data loss or coruption error." --#SUMMARY "detected at shelf: %s, status: %s : Error: %s" --#ARGUMENTS { 1, 2 , 3} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006372} adTAPowerSheddingServerTimeoutClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTASysCtrlPowerShedRemoteServerIP, adTASysCtrlPowerShedStatus } STATUS current DESCRIPTION "Power Shedding Server Timeout Clear" --#TYPE "Major - Power Shedding Server Timeout Clear" --#SUMMARY "adTaControllerMgmtTraps 1006373: Power Shedding Server --#SUMMARY "timeout clear at chassis: %s" --#ARGUMENTS { 1 } --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Power Shedding Server Timeout Clear" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006373} adTAPowerSheddingServerTimeout NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTASysCtrlPowerShedRemoteServerIP, adTASysCtrlPowerShedStatus } STATUS current DESCRIPTION "Power Shedding Server Timeout" --#TYPE "Major - Power Shedding Server Timeout" --#SUMMARY "adTaControllerMgmtTraps 1006373: Power Shedding Server"" --#SUMMARY "timeout at chassis: %s" --#ARGUMENTS { 1 } --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Power Shedding Server Timeout" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= {adTaControllerMgmtTraps 1006374} adTASysCtrlCardSensed NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adTAeSCUTrapAlarmLevel } STATUS current DESCRIPTION "A card has been sensed in the chassis." --#TYPE "Informational - A card has been sensed in the chassis" --#SUMMARY "Card sensed in chassis;" --#SUMMARY "chassis: %s, slot: %d" --#ARGUMENTS { 1, 2 } --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Configuration Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTaControllerMgmtTraps 1006376 } adTASysCtrlCardNotSensed NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adTAeSCUTrapAlarmLevel } STATUS current DESCRIPTION "A card is no longer sensed in the chassis." --#TYPE "Warning - A card not sensed in the chassis" --#SUMMARY "Card not sensed in chassis;" --#SUMMARY "chassis: %s, slot: %d" --#ARGUMENTS { 1, 2 } --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Configuration Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTaControllerMgmtTraps 1006377 } adTASysCtrlCardReady NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adTAeSCUTrapAlarmLevel } STATUS current DESCRIPTION "A card is ready to be managed." --#TYPE "Informational - A card is ready to be managed." --#SUMMARY "Card is ready to be managed;" --#SUMMARY "chassis: %s, slot: %d" --#ARGUMENTS { 1, 2 } --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Configuration Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTaControllerMgmtTraps 1006378 } adTASysCtrlCardNotReady NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex, adTAeSCUTrapAlarmLevel } STATUS current DESCRIPTION "A card is not ready to be managed." --#TYPE "Informational - A card is not ready to be managed." --#SUMMARY "Card is not ready to be managed;" --#SUMMARY "chassis: %s, slot: %d" --#ARGUMENTS { 1, 2 } --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Configuration Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTaControllerMgmtTraps 1006379 } -- -- AutoUpgrade EOSS traps -- adTaSysCtrlAutoUpgradeEOSSWarningClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex } STATUS current DESCRIPTION "Auto Upgrade End Of Software Support Warning (Clear)." --#TYPE "Warning - Auto Upgrade End Of Software Support Warning" --#SUMMARY "Auto Upgrade End Of Software Support Warning Clear" --#SUMMARY "detected at chassis: %s, slot: %d" --#ARGUMENTS { 1,2 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Auto Upgrade End Of Software Support Warning" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTaControllerMgmtTraps 1006380 } adTaSysCtrlAutoUpgradeEOSSWarningActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex } STATUS current DESCRIPTION "This trap is used to indicate the module may not be supported by future SystemReleases. Please contact Adtran customer support for further information." --#TYPE "Warning - Auto Upgrade End Of Software Support Warning" --#SUMMARY "Auto Upgrade End Of Software Support Warning Active" --#SUMMARY "detected at chassis: %s, slot: %d" --#ARGUMENTS { 1,2 } --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Auto Upgrade End Of Software Support Warning" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTaControllerMgmtTraps 1006381 } adTaSysCtrlAutoUpgradeEOSSDeniedClear NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex } STATUS current DESCRIPTION "Auto Upgrade End Of Software Support Denied (Clear)." --#TYPE "Minor - Auto Upgrade End Of Software Support Denied" --#SUMMARY "Auto Upgrade End Of Software Support Denied Clear" --#SUMMARY "detected at chassis: %s, slot: %d" --#ARGUMENTS { 1,2 } --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Auto Upgrade End Of Software Support Denied" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTaControllerMgmtTraps 1006382 } adTaSysCtrlAutoUpgradeEOSSDeniedActive NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adGenSlotInfoIndex } STATUS current DESCRIPTION "This trap is used to indicate the module is not supported by the SystemRelease of the provisioned AutoUpgrade configuration file. AutoUpgrade cannot proceed until this is resolved. Please contact Adtran customer support for further information." --#TYPE "Minor - Auto Upgrade End Of Software Support Denied" --#SUMMARY "Auto Upgrade End Of Software Support Denied Active" --#SUMMARY "detected at chassis: %s, slot: %d" --#ARGUMENTS { 1,2 } --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Auto Upgrade End Of Software Support Denied" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTaControllerMgmtTraps 1006383 } -- -- AutoUpgrade EOSS traps -- adTASysConfigurationChange NOTIFICATION-TYPE OBJECTS { adTrapInformSeqNum, sysName, adTASysLastConfigChangeAlarmTime } STATUS current DESCRIPTION "A system configuration change has occurred. The frequency of this alarm is controlled by the adTASysConfigurationChangeTimer OID." --#TYPE "Informational - A system configuration change has occurred." --#SUMMARY "System configuration change." --#SUMMARY "chassis: %s" --#ARGUMENTS { 1 } --#SEVERITY INFORMATIONAL --#GENERIC 6 --#CATEGORY "Configuration Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= { adTaControllerMgmtTraps 1006384 } END