880 lines
33 KiB
Plaintext
880 lines
33 KiB
Plaintext
|
|
ADTRAN-5KSCM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- TITLE: 5kSCM MIB Definitions
|
|
-- FILENAME: ADTA5KSCM.MIB
|
|
-- AUTHOR: Arthur Poleon
|
|
-- DATE: 2003/04/04
|
|
--
|
|
-- ==========================================================================
|
|
-- History
|
|
-- ==========================================================================
|
|
-- 01/29/04 AP For SCA OID, DB0(data bit zeo) corresponds to the Accessory Slot.
|
|
-- 02/03/06 KMM Additional changes made while adding support for packed
|
|
-- sstate msgs. Added:
|
|
-- *) service state set single fail
|
|
-- *) service state get single fail
|
|
-- *) service state set all fail
|
|
-- *) service state get all fail
|
|
-- 04/03/06 KMM Removed alarms added on 02/03/06. These are auto-clearing alarms, therefore
|
|
-- do not have alarm status.
|
|
-- 04/17/06 JMC Added Power Bus B Alarm active and clear.
|
|
-- 05/03/06 JMC Fixed up some outdated descriptions.
|
|
-- 05/04/06 JMC Fixed up some outdated descriptions, again.
|
|
-- 05/09/06 JMC Added power shedding bit definitions to commments.
|
|
-- 05/17/06 JMC Fixed alarm status bit for power shedding.
|
|
-- 05/26/06 JMC Addition of Power Shedding alarms, cleanup.
|
|
-- 06/01/06 JMC Lots of cleanup to bit definitions and commenting.
|
|
-- Fixup to adta5kSCMShelfRelatedAlarmStatus.
|
|
-- 06/05/06 JMC Fixed adGenSlotAlarmStatus Bits 40-54.
|
|
-- 06/06/06 JMC Removed some adGenSlotAlarmStatus bits - shouldn't have been there.
|
|
-- 06/09/06 JMC Removed Card Removed and Fuse Blown status in adGenSlotAlarmStatus OID.
|
|
-- 10/19/06 AP Remove adta5kSCMAlarmIndex index range.
|
|
-- 06/28/06 AP Increase adta5kSCMAIDIndex value range from 40 to 128.
|
|
-- 03/27/08 WFE Added adTASCM5kChassisRemoved, adTASCM5kChassisLinkStatusDown, and
|
|
-- adTASCM5kChassisLinkStatusUp traps.
|
|
-- Updated adGenSlotAlarmStatus bits.
|
|
-- 09/26/13 RJF "DO NOT MAKE HISTORY COMMENTS HERE!!!! Revision history now in REVISION/DESCRIPTION clauses below"
|
|
--
|
|
-- ==========================================================================
|
|
|
|
|
|
|
|
-- ==========================================================================
|
|
-- This MIB defines the enterprise specific MIB for the TA5000 SCM.
|
|
-- ==========================================================================
|
|
-- ADTRAN standard (ADTRAN)
|
|
-- ADTRAN textual conventions (adtrantc)
|
|
-- ADTRAN generic chassis (genchass)
|
|
-- ADTRAN generic slot (genslot)
|
|
--
|
|
--
|
|
-- ==========================================================================
|
|
-- adGenSlotFaceplate
|
|
-- ==========================================================================
|
|
-- The various values for each LED are:
|
|
-- 00 Off
|
|
-- 01 Green
|
|
-- 10 Red
|
|
-- 11 Yellow
|
|
-- There the 9 faceplate LEDs. Each LED is represented by two bits.
|
|
-- The first byte indicates the number of LEDs; the remaining
|
|
-- bytes encode the status of the LEDs in order from top to bottom.
|
|
-- The mapping of the 3 bytes is illustrated below:
|
|
-- 1,2 3,4 5,6 7,8 9,10 11,12 13,14 15,16 17,18
|
|
-- LAN HOST ACO CRI MAJ MIN TEST ALM PWR
|
|
-- 1188010G2
|
|
-- 1,2 3,4 5,6 7,8 9,10 11,12 13,14 15,16
|
|
-- HOST ACO CRI MAJ MIN TEST ALM PWR
|
|
-- 1188011G1
|
|
-- Same as 1188010G2 Plus
|
|
-- 17,18 19,20 21,22 23,24
|
|
-- ETH2 ETH-ACT ETH ETH-ACT
|
|
--
|
|
-- 1187011G1 TA5k System Controller w/ Bridging (Domestic)
|
|
-- 1,2 3,4 5,6 7,8 9,10 11,12 13,14 15,16 17,18 19,20 21,22
|
|
-- LAN HOST ACO CRI MAJ MIN TEST ALM PWR ETH2 ETH2-ACT
|
|
--
|
|
-- ==========================================================================
|
|
-- adGenSlotAlarmStatus
|
|
-- ==========================================================================
|
|
-- =========================================================================
|
|
-- Bits Details for 1-16 SCM alarm/status
|
|
-- =========================================================================
|
|
-- Bit 1 Indicates that a alarm is present on the SCM.
|
|
-- =========================================================================
|
|
-- Bit 2 Alarm cut-off is on
|
|
-- Bit 3 Alarm cut-off input is active
|
|
-- =========================================================================
|
|
-- Bit 4 N/A
|
|
-- Bit 5 N/A
|
|
-- Bit 6 N/A
|
|
-- =========================================================================
|
|
-- Bit 7 adTAeSCUCtrpBusApowerAlm (-48V Power Supply A alarm is active)
|
|
-- Bit 8 adTAeSCUCtrpBusBpowerAlm (-48V Power Supply B alarm is active)
|
|
-- Bit 9 Device comm failure - this is not a SNMP alarm
|
|
-- Bit 10 One or more card fuses on this chassis is open
|
|
-- Bit 11 adTAeSCUCraftLoginNotfication
|
|
-- =========================================================================
|
|
-- Bit 12 N/A
|
|
-- Bit 13 N/A
|
|
-- Bit 14 N/A
|
|
-- Bit 15 N/A
|
|
-- Bit 16 N/A
|
|
-- Bit 17 N/A
|
|
-- Bit 18 N/A
|
|
-- Bit 19 N/A
|
|
-- Bit 20 N/A
|
|
-- =========================================================================
|
|
-- Bit 21 adTAPowerSheddingInputAsserted
|
|
-- Bit 22 adTAPowerSheddingActivated
|
|
-- =========================================================================
|
|
-- Bit 23 N/A
|
|
-- =========================================================================
|
|
-- Bit 24 adSCM5kExternalAlm Input 1
|
|
-- Bit 25 adSCM5kExternalAlm Input 2
|
|
-- Bit 26 adSCM5kExternalAlm Input 3
|
|
-- Bit 27 adSCM5kExternalAlm Input 4
|
|
-- Bit 28 adSCM5kExternalAlm Input 5
|
|
-- Bit 29 adSCM5kExternalAlm Input 6
|
|
-- Bit 30 adSCM5kExternalAlm Input 7
|
|
-- Bit 31 adSCM5kExternalAlm Input 8
|
|
-- Bit 32 adSCM5kExternalAlm Input 9
|
|
-- Bit 33 adSCM5kExternalAlm Input 10
|
|
-- Bit 34 adSCM5kExternalAlm Input 11
|
|
-- Bit 35 adSCM5kExternalAlm Input 12
|
|
-- Bit 36 adSCM5kExternalAlm Input 13
|
|
-- Bit 37 adSCM5kExternalAlm Input 14
|
|
-- Bit 38 adSCM5kExternalAlm Input 15
|
|
-- Bit 39 adSCM5kExternalAlm Input 16
|
|
-- =========================================================================
|
|
-- Bit 40 adTACriticalAudibleRelayActive
|
|
-- Bit 41 adTACriticalVisualRelayActive
|
|
-- Bit 42 adTAMajAudibleRelayActive
|
|
-- Bit 43 adTAMajVisualRelayActive
|
|
-- Bit 44 adTAMinorAudibleRelayActive
|
|
-- Bit 45 adTAMinorVisualRelayActive
|
|
-- Bit 46 adTAAUSoftwareVerErrorActive
|
|
-- Bit 47 adTASCM5kChassisLinkStatusDown Shelf 2
|
|
-- Bit 48 adTASCM5kChassisLinkStatusDown Shelf 3
|
|
-- Bit 49 adTASCM5kChassisLinkStatusDown Shelf 4
|
|
-- Bit 50 Reserved (Deprecated)
|
|
-- Bit 51 Reserved (Deprecated)
|
|
-- Bit 52 Reserved
|
|
-- Bit 53 Reserved
|
|
-- Bit 54 AutoUpgrade End Of Software Support Warning (adTaSysCtrlAutoUpgradeEOSSWarning)
|
|
-- Bit 55 AutoUpgrade End Of Software Support Denied (adTaSysCtrlAutoUpgradeEOSSDenied)
|
|
-- ==========================================================================
|
|
|
|
|
|
IMPORTS
|
|
NOTIFICATION-TYPE, OBJECT-TYPE, Integer32,
|
|
MODULE-IDENTITY, OBJECT-IDENTITY,
|
|
TimeTicks
|
|
FROM SNMPv2-SMI
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
sysName
|
|
FROM SNMPv2-MIB
|
|
AdPresence
|
|
FROM ADTRAN-TC
|
|
adProducts,
|
|
adMgmt
|
|
FROM ADTRAN-MIB
|
|
adGenSlotInfoIndex
|
|
FROM ADTRAN-GENSLOT-MIB
|
|
adTrapInformSeqNum
|
|
FROM ADTRAN-GENTRAPINFORM-MIB
|
|
adTAeSCUTrapAlarmLevel
|
|
FROM ADTRAN-TAeSCUEXT1-MIB;
|
|
|
|
|
|
adTA5kSCMmg MODULE-IDENTITY
|
|
LAST-UPDATED "201309130752Z"
|
|
ORGANIZATION "Adtran, Inc."
|
|
CONTACT-INFO
|
|
"CND Tech Support
|
|
Postal: ADTRAN, Inc.
|
|
901 Explorer Blvd.
|
|
Huntsville, AL 35806
|
|
Tel: +1 800 726-8663
|
|
Fax: +1 256 963 6217
|
|
E-mail: support@adtran.com"
|
|
DESCRIPTION
|
|
"This MIB defines the objects for the adta5KSCM MIB."
|
|
|
|
REVISION "201309130752Z"
|
|
DESCRIPTION "Added adGenSlotAlarmStatus comments for new EOSS alarms."
|
|
|
|
REVISION "201104251300Z"
|
|
DESCRIPTION "Add comment for SCM LED format."
|
|
|
|
REVISION "201002241300Z"
|
|
DESCRIPTION "Converted from SNMPv1 adta5kSCM.mib file."
|
|
|
|
::= { adMgmt 749 }
|
|
|
|
-- OBJECT IDENTIFIERS
|
|
adTA5kSCM OBJECT IDENTIFIER ::= { adProducts 749 }
|
|
-- adTA5kSCMmg OBJECT IDENTIFIER ::= { adMgmt 749 }
|
|
|
|
adta5kSCMMgmt OBJECT IDENTIFIER ::= { adTA5kSCMmg 1 }
|
|
|
|
|
|
--
|
|
|
|
-- 5kSCM and MUXA and MUXB is in first shelf.
|
|
-- To determine a line card shelf number you must
|
|
-- ((adGenSlotInfoIndex - 1) / ad5kSCMNumSlotPerShelf + 1) for line cards,
|
|
-- and the shelf slot number is ((adGenSlotInfoIndex - 1) modulus ad5kSCMNumSlotPerShelf + 1).
|
|
-- However, I thought that the original idea was to make this look like a system and that cards would be addressed by their slot number across the entire . When do you expect this table to be used.
|
|
|
|
-- A type to define 5kSCM shelf numbers
|
|
-- Number of shelves possible in this DSLAM (HDX). Default is 1.
|
|
Adta5kSCMShelfNumber ::= Integer32 ( 1..255)
|
|
|
|
|
|
-- Count of shelves provisioned to be installed, starting at 1.
|
|
adta5kSCMNumberOfShelves OBJECT-TYPE
|
|
SYNTAX Adta5kSCMShelfNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the number of shelves presently provisioned in the system.
|
|
Provisioning is done in the PSM provisioning menu."
|
|
::= { adta5kSCMMgmt 10 }
|
|
|
|
adta5kSCMLastChanged OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sysUpTime When adta5kSCMNumberOfShelves changed, or any adta5kSCMShelfInfoState changed.
|
|
Zero if unchanged since powerup"
|
|
::= { adta5kSCMMgmt 2 }
|
|
|
|
|
|
--
|
|
--
|
|
--
|
|
|
|
adta5kSCMShelfStatusMgmt OBJECT IDENTIFIER ::= { adta5kSCMMgmt 12 }
|
|
|
|
adta5kSCMShelfStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Adta5kSCMShelfStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Comparable to the GENCHASSIS MIB, but applicable for
|
|
all shelves in a subtended system like the HDX."
|
|
::= { adta5kSCMShelfStatusMgmt 1 }
|
|
|
|
adta5kSCMShelfStatusEntry OBJECT-TYPE
|
|
SYNTAX Adta5kSCMShelfStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { adta5kSCMShelfNumber }
|
|
::= { adta5kSCMShelfStatusTable 1 }
|
|
|
|
Adta5kSCMShelfStatusEntry ::=
|
|
SEQUENCE {
|
|
adta5kSCMShelfNumber
|
|
Adta5kSCMShelfNumber,
|
|
adta5kSCMShelfInfoState
|
|
AdPresence,
|
|
adta5kSCMShelfAlarmStatus
|
|
OCTET STRING,
|
|
adta5kSCMShelfProvVersion
|
|
Integer32,
|
|
adta5kSCMShelfViewAll
|
|
OCTET STRING,
|
|
adta5kSCMShelfRelatedAlarmStatus
|
|
OCTET STRING
|
|
}
|
|
|
|
adta5kSCMShelfNumber OBJECT-TYPE
|
|
SYNTAX Adta5kSCMShelfNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index for each row in this table."
|
|
::= { adta5kSCMShelfStatusEntry 1 }
|
|
|
|
adta5kSCMShelfInfoState OBJECT-TYPE
|
|
SYNTAX AdPresence
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the shelf status:
|
|
empty(1): Not provisioned to be present,
|
|
virtual(2): Provisioned but not operational (link status down),
|
|
occupied(3): Provisioned and operational."
|
|
::= { adta5kSCMShelfStatusEntry 2 }
|
|
|
|
adta5kSCMShelfAlarmStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit encoded string representing a summary of the
|
|
alarm state of the chassis"
|
|
::= { adta5kSCMShelfStatusEntry 3 }
|
|
|
|
adta5kSCMShelfProvVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of all the card Provisioning Counters in the generic slot MIB
|
|
for this shelf that can be used by an EMS to detect local changes to
|
|
card provisioning that need to be investigated for synchronization."
|
|
::= { adta5kSCMShelfStatusEntry 4 }
|
|
|
|
adta5kSCMShelfViewAll OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit encoded string representing the status of faceplate
|
|
indicators, LEDs, & switches for GUI visualization.
|
|
Each product defines this as a bitmap of booleans, or
|
|
a byte for each indicator if not binary. The strings from
|
|
all the slots are concatenated into this one object, after
|
|
prefixing each card indicator string with two bytes. The
|
|
first byte contains the slot number as an integer, and
|
|
the second byte contains the remaining string length for that
|
|
slot. This object provides highest speed access for chassis
|
|
views to overcome multiple varbind SNMP inefficiency."
|
|
::= { adta5kSCMShelfStatusEntry 5 }
|
|
|
|
|
|
adta5kSCMShelfRelatedAlarmStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit encoded string representing the alarm status of the
|
|
environmental alarms for each shelf. The bits are defined
|
|
in network order, that is, most significant bit first.
|
|
0 = NOT-ALARMED, 1 = ALARMED
|
|
The bit positions are:
|
|
1 - PWR A
|
|
2 - PWR B
|
|
3 - N/A
|
|
4 - N/A
|
|
5 - N/A
|
|
6 - N/A
|
|
7 - N/A"
|
|
::= { adta5kSCMShelfStatusEntry 6 }
|
|
|
|
--
|
|
--
|
|
-- Mapping table to translate from system slot number to shelf and local slot number
|
|
|
|
adta5kSCMShelfXlateFromSlotTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Adta5kSCMShelfXlateFromSlotEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of slots available for boards."
|
|
::= { adta5kSCMShelfStatusMgmt 2 }
|
|
|
|
adta5kSCMShelfXlateFromSlotEntry OBJECT-TYPE
|
|
SYNTAX Adta5kSCMShelfXlateFromSlotEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { adGenSlotInfoIndex}
|
|
::= { adta5kSCMShelfXlateFromSlotTable 1 }
|
|
|
|
Adta5kSCMShelfXlateFromSlotEntry ::=
|
|
SEQUENCE {
|
|
adta5kSCMShelfOrdinal
|
|
Adta5kSCMShelfNumber,
|
|
adta5kSCMShelfSlotAddress
|
|
Integer32
|
|
}
|
|
adta5kSCMShelfOrdinal OBJECT-TYPE
|
|
SYNTAX Adta5kSCMShelfNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the chassis number that corresponds to the adGenSlotInfoIndex."
|
|
::= { adta5kSCMShelfXlateFromSlotEntry 1 }
|
|
|
|
adta5kSCMShelfSlotAddress OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the chassis relative slot number that corresponds to the adGenSlotInfoIndex."
|
|
::= { adta5kSCMShelfXlateFromSlotEntry 2 }
|
|
|
|
---
|
|
---
|
|
--- Mapping table to translate from shelf and slot number to system slot number
|
|
|
|
adta5kSCMShelfXlateToSlotTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Adta5kSCMShelfXlateToSlotEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of slots available for boards."
|
|
::= { adta5kSCMShelfStatusMgmt 3 }
|
|
|
|
adta5kSCMShelfXlateToSlotEntry OBJECT-TYPE
|
|
SYNTAX Adta5kSCMShelfXlateToSlotEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { adGenSlotInfoIndex, adta5kSCMShelfNumberAddress}
|
|
::= { adta5kSCMShelfXlateToSlotTable 1 }
|
|
|
|
Adta5kSCMShelfXlateToSlotEntry ::=
|
|
SEQUENCE {
|
|
adta5kSCMSystemSlotAddress
|
|
Integer32,
|
|
adta5kSCMShelfNumberAddress
|
|
Integer32
|
|
}
|
|
adta5kSCMSystemSlotAddress OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The global DSLAM slot corresponding to this shelf relative slot."
|
|
::= { adta5kSCMShelfXlateToSlotEntry 1 }
|
|
|
|
adta5kSCMShelfNumberAddress OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Shelf Address/Number."
|
|
::= { adta5kSCMShelfXlateToSlotEntry 2 }
|
|
|
|
---
|
|
---
|
|
--- Extension of genslot.mib for trap authentication status checking
|
|
|
|
|
|
adta5kSCMShelfSlotAlarmStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Adta5kSCMShelfSlotAlarmStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of slot alarms for states the cards themselves
|
|
cannot report for various reasons."
|
|
::= { adta5kSCMShelfStatusMgmt 4 }
|
|
|
|
adta5kSCMShelfSlotAlarmStatusEntry OBJECT-TYPE
|
|
SYNTAX Adta5kSCMShelfSlotAlarmStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { adGenSlotInfoIndex }
|
|
::= { adta5kSCMShelfSlotAlarmStatusTable 1 }
|
|
|
|
Adta5kSCMShelfSlotAlarmStatusEntry ::=
|
|
SEQUENCE {
|
|
adta5kSCMShelfSlotAlarmStatus
|
|
OCTET STRING
|
|
}
|
|
adta5kSCMShelfSlotAlarmStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit encoded string representing the alarm status of the
|
|
certain card/slot alarms for each HDX slot. The bits are defined
|
|
in network order, that is, most significant bit first.
|
|
0 = NOT-ALARMED, 1 = ALARMED
|
|
The bit positions are:
|
|
1 - Card Removed
|
|
2 - Fuse Blown"
|
|
::= { adta5kSCMShelfSlotAlarmStatusEntry 1 }
|
|
|
|
---
|
|
---
|
|
--- Shelf specific provisionable environmental alarms
|
|
|
|
adta5kSCMUserDefinableAlarm OBJECT IDENTIFIER
|
|
::= { adta5kSCMMgmt 15 }
|
|
|
|
adta5kSCMEnvAlarmsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Adta5kSCMEnvAlarmsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 5kSCM Environmental alarm table
|
|
with the following alarms:
|
|
This table is a superset of the the adTAeSCUEnvAlarmsTable.
|
|
It includes the environmental alarms of the subtended shelves."
|
|
::= { adta5kSCMUserDefinableAlarm 1 }
|
|
|
|
|
|
adta5kSCMEnvAlarmsEntry OBJECT-TYPE
|
|
SYNTAX Adta5kSCMEnvAlarmsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Controller Unit Environmental alarm table."
|
|
INDEX { adta5kSCMShelfNumber, adta5kSCMAlarmIndex}
|
|
::= { adta5kSCMEnvAlarmsTable 1 }
|
|
|
|
Adta5kSCMEnvAlarmsEntry ::=
|
|
SEQUENCE {
|
|
adta5kSCMAlarmIndex
|
|
Integer32,
|
|
adta5kSCMEnvAlarmDefaultName
|
|
DisplayString,
|
|
adta5kSCMEnvAlarmUserName
|
|
DisplayString,
|
|
adta5kSCMEnvAlarmInputLevel
|
|
INTEGER,
|
|
adta5kSCMAIDIndex
|
|
Integer32,
|
|
adta5kSCMConditionCode
|
|
DisplayString
|
|
}
|
|
adta5kSCMAlarmIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm Index for type of environmental alarm."
|
|
::= { adta5kSCMEnvAlarmsEntry 1 }
|
|
|
|
adta5kSCMEnvAlarmDefaultName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default ENV alarm name."
|
|
::= { adta5kSCMEnvAlarmsEntry 2 }
|
|
|
|
adta5kSCMEnvAlarmUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A user specified name.
|
|
adta5kSCMEnvAlarmDefaultName or a user provided name.
|
|
'-48V Bus A Input' is read-only.
|
|
'-48V Bus B Input' is read-only."
|
|
::= { adta5kSCMEnvAlarmsEntry 3 }
|
|
|
|
adta5kSCMEnvAlarmInputLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
info(2),
|
|
alert(3),
|
|
minor(4),
|
|
major(5),
|
|
critical(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm level."
|
|
::= { adta5kSCMEnvAlarmsEntry 4 }
|
|
|
|
adta5kSCMAIDIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AID Index.
|
|
-48V Bus A Input has a maximum range of 45
|
|
-48V Bus B Input has a maximum range of 45
|
|
All other alarms will have a max index range of 64."
|
|
::= { adta5kSCMEnvAlarmsEntry 5 }
|
|
|
|
adta5kSCMConditionCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..11))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Condition code."
|
|
::= { adta5kSCMEnvAlarmsEntry 6 }
|
|
|
|
--
|
|
-- 5kSCM SCA support for primary and secondary shelves
|
|
--
|
|
|
|
adta5kSCMScaMgmt OBJECT IDENTIFIER ::= { adta5kSCMMgmt 16 }
|
|
|
|
adta5kSCMScaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Adta5kSCMScaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Expansion OIDs for the HDX system."
|
|
::= { adta5kSCMScaMgmt 1 }
|
|
|
|
adta5kSCMScaEntry OBJECT-TYPE
|
|
SYNTAX Adta5kSCMScaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { adta5kSCMShelfNumber }
|
|
::= { adta5kSCMScaTable 1 }
|
|
|
|
Adta5kSCMScaEntry ::=
|
|
SEQUENCE {
|
|
adTAe5kSCMSCAProvItemChanged
|
|
Integer32,
|
|
adTAe5kSCMSCAPresentCards
|
|
Integer32,
|
|
adTAe5kSCMSCASlotsWithProvData
|
|
Integer32,
|
|
adTAe5kSCMSCAoptRestoreCardBitmask
|
|
Integer32
|
|
}
|
|
|
|
adTAe5kSCMSCAProvItemChanged OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bitmap of cards with changed provisions.
|
|
This read-only OID will return a bitmap of slots
|
|
whose provisions have changed since power-up or the
|
|
last SCA save operation. DB1 corresponds to slot 1,
|
|
DB31 corresponds to slot 31. DB0 corresponds to the
|
|
Accessory Slot"
|
|
::= { adta5kSCMScaEntry 1 }
|
|
|
|
adTAe5kSCMSCAPresentCards OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bitmap of card 'present' in the shelf.
|
|
This read-only OID will return a bitmap of
|
|
slots with cards installed. DB1 corresponds
|
|
to slot 1, DB31 corresponds to slot 31.
|
|
DB0 corresponds to the Accessory Slot."
|
|
::= { adta5kSCMScaEntry 2 }
|
|
|
|
adTAe5kSCMSCASlotsWithProvData OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bitmap of slots with provision data.
|
|
This read-only OID will return a bitmap of slots
|
|
with provision information. DB1 corresponds to
|
|
slot 1, DB31 corresponds to slot 31. DB0 corresponds
|
|
to the Accessory Slot"
|
|
::= { adta5kSCMScaEntry 3 }
|
|
|
|
adTAe5kSCMSCAoptRestoreCardBitmask OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SCA restore to linecard enable bitmask.
|
|
This OID accesses a enable/disable bitmap indicating which slots
|
|
should have their provision information restored during an SCA
|
|
restore operation. Valid slots are 1..30 or 1..24, depending on
|
|
shelf type. DB1 corresponds to slot 1, DB31 corresponds to slot
|
|
31."
|
|
::= { adta5kSCMScaEntry 4 }
|
|
|
|
|
|
|
|
-- 5kSCM environmental alarms
|
|
-- 5kSCM Chassis Traps
|
|
|
|
adTA5kSCMNotificationEvents OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The SCM controller events"
|
|
::= { adTA5kSCM 0 }
|
|
|
|
adSCM5kExternalAlmClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adta5kSCMEnvAlarmUserName,
|
|
adta5kSCMEnvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"External Alarm clear"
|
|
--#TYPE "Warning - External Alarm Failure "
|
|
--#SUMMARY "adTA5kSCM 74902: External Alarm;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY MINOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTA5kSCMNotificationEvents 74902 }
|
|
|
|
adSCM5kExternalAlm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adta5kSCMEnvAlarmUserName,
|
|
adta5kSCMEnvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"External Failure Alarm active"
|
|
--#TYPE "Warning - External Failure Alarm active"
|
|
--#SUMMARY "adTA5kSCM 74903: External Alarm active;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY MINOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTA5kSCMNotificationEvents 74903 }
|
|
|
|
|
|
|
|
adTASCM5kBusApwrAlmClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adta5kSCMShelfNumber,
|
|
adta5kSCMEnvAlarmUserName,
|
|
adta5kSCMEnvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bus A Power Failure Alarm clear"
|
|
--#TYPE "Informational - Bus A Power Failure Alarm clear"
|
|
--#SUMMARY "adTA5kSCM 74904: Bus A Power Failure Alarm cleared;"
|
|
--#SUMMARY "detected at 5kSCM: %s Shelf %d, Alarm: %s"
|
|
--#ARGUMENTS { 1 , 2, 3}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTA5kSCMNotificationEvents 74904 }
|
|
|
|
adTASCM5kBusApowerAlm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adta5kSCMShelfNumber,
|
|
adta5kSCMEnvAlarmUserName,
|
|
adta5kSCMEnvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bus A Power Failure Alarm active"
|
|
--#TYPE "Major - Bus A Power Failure Alarm active"
|
|
--#SUMMARY "adTA5kSCM 74905: Bus A Power Failure Alarm active;"
|
|
--#SUMMARY "detected at 5kSCM: %s Shelf %d, Alarm: %s"
|
|
--#ARGUMENTS { 1 , 2, 3}
|
|
--#SEVERITY MAJOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTA5kSCMNotificationEvents 74905 }
|
|
|
|
|
|
adTASCM5kBusBpwrAlmClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adta5kSCMShelfNumber,
|
|
adta5kSCMEnvAlarmUserName,
|
|
adta5kSCMEnvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bus B Power Failure Alarm clear"
|
|
--#TYPE "Informational - Bus B Power Failure Alarm clear"
|
|
--#SUMMARY "adTA5kSCM 74906: Bus B Power Failure Alarm cleared;"
|
|
--#SUMMARY "detected at 5kSCM: %s Shelf %d, Alarm: %s"
|
|
--#ARGUMENTS { 1 , 2, 3}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTA5kSCMNotificationEvents 74906 }
|
|
|
|
adTASCM5kBusBpowerAlm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adta5kSCMShelfNumber,
|
|
adta5kSCMEnvAlarmUserName,
|
|
adta5kSCMEnvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bus B Power Failure Alarm active"
|
|
--#TYPE "Major - Bus B Power Failure Alarm active"
|
|
--#SUMMARY "adTA5kSCM 74907: Bus B Power Failure Alarm active;"
|
|
--#SUMMARY "detected at 5kSCM: %s Shelf %d, Alarm: %s"
|
|
--#ARGUMENTS { 1 , 2, 3}
|
|
--#SEVERITY MAJOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTA5kSCMNotificationEvents 74907 }
|
|
|
|
adTASCM5kChassisLinkStatusUp NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adta5kSCMShelfNumber,
|
|
adTAeSCUTrapAlarmLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SCM has detected a chassis link up."
|
|
--#TYPE "Informational - Chassis link down clear"
|
|
--#SUMMARY "adTA5kSCM 74908: Chassis link down clear;"
|
|
--#SUMMARY "detected at HDX: %s Shelf %d"
|
|
--#ARGUMENTS { 1 , 2}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Configuration Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTA5kSCMNotificationEvents 74908 }
|
|
|
|
adTASCM5kChassisLinkStatusDown NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adta5kSCMShelfNumber,
|
|
adTAeSCUTrapAlarmLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SCM has detected a chassis link down."
|
|
--#TYPE "Critical - Chassis link down active"
|
|
--#SUMMARY "adTA5kSCM 74909: Chassis link down active;"
|
|
--#SUMMARY "detected at HDX: %s Shelf %d"
|
|
--#ARGUMENTS { 1 , 2}
|
|
--#SEVERITY CRITICAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTA5kSCMNotificationEvents 74909 }
|
|
|
|
adTASCM5kChassisRemoved NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adta5kSCMShelfNumber,
|
|
adTAeSCUTrapAlarmLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SCM has removed the last chassis because of a provisioning change.
|
|
All modules in the chassis will be removed."
|
|
--#TYPE "Informational - Chassis removed provisioned active"
|
|
--#SUMMARY "adTA5kSCM 74911: Chassis removed provisioned;"
|
|
--#SUMMARY "detected at HDX: %s Shelf %d"
|
|
--#ARGUMENTS { 1 , 2}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Configuration Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTA5kSCMNotificationEvents 74910 }
|
|
|
|
|
|
END
|
|
|