WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/zhone/ZHONE-ISDN-MIB

615 lines
18 KiB
Plaintext
Raw Blame History

--
-- phyIsdn.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 271
-- Monday, March 03, 2003 at 12:00:28
--
ZHONE-ISDN-MIB DEFINITIONS ::= BEGIN
IMPORTS
ifIndex
FROM IF-MIB
PerfCurrentCount, PerfIntervalCount, PerfTotalCount
FROM PerfHist-TC-MIB
TimeTicks, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY,
OBJECT-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
zhoneTrapModules, zhonePhysical
FROM Zhone;
--
--
--
--
--
--
--
--
zhoneIsdn MODULE-IDENTITY
LAST-UPDATED "200303031944Z" -- March 03, 2003 at 19:44 GMT
ORGANIZATION
"Zhone Technologies."
CONTACT-INFO
" Postal:
Zhone Technologies, Inc.
@ Zhone Way
7001 Oakport Street
Oakland, CA 94621
USA
Toll-Free: +1 877-ZHONE20 (+1 877-946-6320)
Tel: +1-510-777-7000
Fax: +1-510-777-7001
E-mail: support@zhone.com"
DESCRIPTION
"ISDN BRI S/T Interface MIB module.
This MIB manages the ISDN BRI S/T
Interface on Zedge ."
REVISION "200303031158Z" -- March 03, 2003 at 11:58 GMT
DESCRIPTION
"V01.00.03 - Add/modified loopback types."
REVISION "200302041804Z" -- February 04, 2003 at 18:04 GMT
DESCRIPTION
"V01.00.02 - Add additional loopback
types and added line-power for
Malc ULC."
REVISION "200009271057Z" -- September 27, 2000 at 10:57 GMT
DESCRIPTION
"V01.00.00 Initial Release"
REVISION "200009271942Z" -- September 27, 2000 at 19:42 GMT
DESCRIPTION
"V01.00.01 Corrected DDL markup"
::= { zhonePhysical 7 }
--
-- Node definitions
--
-- 1.3.6.1.4.1.5504.3.8.3
zhoneIsdnTrap OBJECT-IDENTITY
STATUS current
DESCRIPTION
" Trap for zedge to be sent to ZMS for far end code violation."
::= { zhoneTrapModules 3 }
-- 1.3.6.1.4.1.5504.3.8.3.1
isdnMibV2Traps OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This object identity adds a zero(0) for the next to last
sub-identifier which should be used for new SNMPv2 Traps."
::= { zhoneIsdnTrap 1 }
-- 1.3.6.1.4.1.5504.3.8.3.1.1
isdnTrapFrameSynchLoss NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION
"When the driver receives three successive out of synch frames
then it will set the frame synch loss bit to true and then the
application will send a trap to the NMS. After this when the driver
detects 5 good frames then it will set the frame synch lossbit to false."
::= { isdnMibV2Traps 1 }
-- 1.3.6.1.4.1.5504.3.8.3.1.2
isdnTrapFECV NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION
"Far end code violation Trap"
::= { isdnMibV2Traps 2 }
-- 1.3.6.1.4.1.5504.3.8.3.1.3
isdnTrapAmiViolations NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION
"Bad Ami violation Trap. If number of ami violation crosses
the isdnThresholdAmiViolations then the application will send this to NMS."
::= { isdnMibV2Traps 3 }
-- 1.3.6.1.4.1.5504.3.8.3.1.4
isdnTrapUnbalancedFrame NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap will be sent to NMS after the isdnThresholdUnbalancedFrame
value is crossed.
"
::= { isdnMibV2Traps 4 }
--
-- Overview of ISDN BRI with S/T interface MIB
--
-- The ISDN BRI with S/T interface MIB provides the static
-- configuration and operational status information on Zhone's ISDN
-- BRI S/T interface implementation. The following entities
-- are managed:
-- 1) The S/T ports
-- the ports are connected to ISDN terminal devices
-- for voice, fax, and data communication.
--
-- The S/T ports are identified by ISDN shelf/slot/port
-- (which will be mapped to unique ifIndex) number
--
--
--
-- This mib prvides configuration, status and performance parameters
-- used/provided by Zhone implementation of ISDN S/T interfaces.
--
--
--
-- 1.3.6.1.4.1.5504.5.7.1
zhoneIsdnMib OBJECT IDENTIFIER ::= { zhoneIsdn 1 }
--
-- ****************************************************************************
-- The ISDN BRI integrated S/T Interface Configuration Table
-- ****************************************************************************
-- 1.3.6.1.4.1.5504.5.7.1.1
isdnConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsdnConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ISDN BRI integrated S/T Interface Configuration Table.
This table is indexed by IfIndex.It is created by aplication when the system comes up
with default values.
"
::= { zhoneIsdnMib 1 }
-- 1.3.6.1.4.1.5504.5.7.1.1.1
isdnConfigEntry OBJECT-TYPE
SYNTAX IsdnConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ISDN config table for each S/T Interface. "
INDEX { ifIndex }
::= { isdnConfigTable 1 }
IsdnConfigEntry ::=
SEQUENCE {
isdnLineTermClass
INTEGER,
isdnActivationTimer2
INTEGER,
isdnLineLoopBack
INTEGER,
isdnLinePower
INTEGER
}
-- 1.3.6.1.4.1.5504.5.7.1.1.1.1
isdnLineTermClass OBJECT-TYPE
SYNTAX INTEGER
{
class1(1),
class2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NT Terminal Mode.clas1 and class2 operations are as per CCITT I.430,
ETSI ETS 300012, and ANSI T1.605 .These specification mandate two classes
of operation for a TE with respect to D channel operation
class1 : class1 is the higher class , used for signalling information
class2 : This is the lower class.
The default value is class1.
"
::= { isdnConfigEntry 1 }
-- 1.3.6.1.4.1.5504.5.7.1.1.1.2
isdnActivationTimer2 OBJECT-TYPE
SYNTAX INTEGER
{
t2-50ms(1),
t2-100ms(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of Activation Timer #2.
t2-50ms(1): select 50ms for timer #2
t2-100ms(2): select 1000ms for timer #2
The default value is t2-50ms"
::= { isdnConfigEntry 2 }
-- 1.3.6.1.4.1.5504.5.7.1.1.1.3
isdnLineLoopBack OBJECT-TYPE
SYNTAX INTEGER
{
loop-back-none(1),
loop-back-b1-st-tr(2),
loop-back-b1-st-nt(3),
loop-back-b2-st-tr(4),
loop-back-b2-st-nt(5),
loop-back-b1-idl2-tr(6),
loop-back-b1-idl2-nt(7),
loop-back-b2-idl2-tr(8),
loop-back-b2-idl2-nt(9),
loop-back-2bd-idl2-tr(10),
loop-back-2bd-idl2-nt(11),
loop-back-2bd-u-interface-tr(12),
loop-back-2bd-u-interface-nt(13),
loop-back-2bd-external-analog(14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"loop-back-none(1) :no loop back .
loop-back-b1-st-tr(2): transparaent loopback on the S/T interface towards the user(B1 chanel).
loop-back-b1-st-nt(3): non-transparent loopback onthe S/T interface towards the user(B1 chanel)..
loop-back-b2-st-tr(4) :transparaent loopback on the S/T interface towards the user(B2 chanel).
loop-back-b2-st-nt(5):non-transparent loopback on the S/T interface towards the user(B2 channel)
loop-back-b1-idl2-tr(6):transparaent loopback on the IDL2 interface towards the system(B1 channel)
loop-back-b1-idl2-nt(7):non-transparent loopback on the IDL2 interface towards the system(B1 channel)
loop-back-b2-idl2-tr(8):transparaent loopback on the IDL2 interface towards the system(B2 channel)
loop-back-b2-idl2-nt(9): non-transparent loopback on the IDL2 interface towards the system(B2 channel)
loop-back-2bd-idl2-tr(10): transparent loopback on the IDL2 towards the system(2B + D channel)
loop-back-2bd-idl2-nt(11): non-transparent loopback on the IDL2 towards the system(2B + D channel)
loop-back-2bd-u-interface-tr (12): transparent loopback on the U interface towards the user(2B + D channel)
loop-back-2bd-u-interface-nt (13): non-transparent loopback on the U interface(2B + D channel)
loop-back-2bd-external-analog(14): loopback on the external analog interface towards the user(2B + D channel)
st is loopback on the S/T interface towards the user.
idl2 is loopback on the IDL2 interface towards the system.
tr is transparent loopback.
nt is non-transparent loopback.
The default value is loop-back-none."
::= { isdnConfigEntry 3 }
-- 1.3.6.1.4.1.5504.5.7.1.1.1.4
isdnLinePower OBJECT-TYPE
SYNTAX INTEGER
{
off(1),
sealing(2),
powering(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"State of the line power.
off - no power on line.
sealing - minimum current on line to preclude corrosion.
powering - full current on line."
::= { isdnConfigEntry 4 }
-- 1.3.6.1.4.1.5504.5.7.1.2
isdnPerfDataCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsdnPerfDataCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ISDN BRI S/T interface performance table which contains
the performance data for curent 15 minutes.
It contains information about the status of the ISDN S/T interface,
including the error statistics."
::= { zhoneIsdnMib 2 }
-- 1.3.6.1.4.1.5504.5.7.1.2.1
isdnPerfDataCurrentEntry OBJECT-TYPE
SYNTAX IsdnPerfDataCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in current performance table for each ISDN BRI
S/T interface for last 15 minutes."
AUGMENTS { isdnConfigEntry }
::= { isdnPerfDataCurrentTable 1 }
IsdnPerfDataCurrentEntry ::=
SEQUENCE {
isdnPerfCurBadAmiViolation
PerfCurrentCount,
isdnPerfCurUnbalancedFrame
PerfCurrentCount,
isdnPerCurErrorSeconds
PerfCurrentCount,
isdnPerCurFsyncSeconds
PerfCurrentCount,
isdnPerfCurTimeElapsed
TimeTicks
}
-- 1.3.6.1.4.1.5504.5.7.1.2.1.1
isdnPerfCurBadAmiViolation OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current count of frames with incorrect number of AMI violations."
::= { isdnPerfDataCurrentEntry 1 }
-- 1.3.6.1.4.1.5504.5.7.1.2.1.2
isdnPerfCurUnbalancedFrame OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current count of unbalanced frames."
::= { isdnPerfDataCurrentEntry 2 }
-- 1.3.6.1.4.1.5504.5.7.1.2.1.3
isdnPerCurErrorSeconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Curent ISDN Activation error seconds.
"
::= { isdnPerfDataCurrentEntry 3 }
-- 1.3.6.1.4.1.5504.5.7.1.2.1.4
isdnPerCurFsyncSeconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Currents Frame synch loss seconds ."
::= { isdnPerfDataCurrentEntry 4 }
-- 1.3.6.1.4.1.5504.5.7.1.2.1.5
isdnPerfCurTimeElapsed OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In the current 15 Min period number of seconds elapsed that
these counts represent."
::= { isdnPerfDataCurrentEntry 5 }
-- 1.3.6.1.4.1.5504.5.7.1.3
isdnPerfDataPreviousTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsdnPerfDataPreviousEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ISDN BRI S/T interface performance table,
it contains statistics and information about
the status of the ISDN S/T interface,
including the error statistics for previous 15 minutes.
"
::= { zhoneIsdnMib 3 }
-- 1.3.6.1.4.1.5504.5.7.1.3.1
isdnPerfDataPreviousEntry OBJECT-TYPE
SYNTAX IsdnPerfDataPreviousEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in Previous performance table(for last 15 minutes before
the current performance period) for each S/T interface."
AUGMENTS { isdnConfigEntry }
::= { isdnPerfDataPreviousTable 1 }
IsdnPerfDataPreviousEntry ::=
SEQUENCE {
isdnPerfPrevBadAmiViolation
PerfIntervalCount,
isdnPerfPrevUnbalancedFrame
PerfIntervalCount,
isdnPerPrevFsyncSeconds
PerfIntervalCount,
isdnPerfPrevErrorSeconds
PerfIntervalCount
}
-- 1.3.6.1.4.1.5504.5.7.1.3.1.1
isdnPerfPrevBadAmiViolation OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"count of frames with incorrect number of AMI violations
in previous 15 minutes."
::= { isdnPerfDataPreviousEntry 1 }
-- 1.3.6.1.4.1.5504.5.7.1.3.1.2
isdnPerfPrevUnbalancedFrame OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In previous 15 minutes ,count of unbalanced frames."
::= { isdnPerfDataPreviousEntry 2 }
-- 1.3.6.1.4.1.5504.5.7.1.3.1.3
isdnPerPrevFsyncSeconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Frame synch error seconds in previous 15 minues."
::= { isdnPerfDataPreviousEntry 3 }
-- 1.3.6.1.4.1.5504.5.7.1.3.1.4
isdnPerfPrevErrorSeconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In previous 15 minutes ISDN Activation error seconds"
::= { isdnPerfDataPreviousEntry 4 }
-- 1.3.6.1.4.1.5504.5.7.1.4
isdnPerfDataTotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsdnPerfDataTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ISDN BRI S/T interface performance table,
it contains statistics and information about
the status of the ISDN S/T interface,
including the error statistics for up to the
the last 24 hours. This is maintained in 15
minute intervals NOT including the current
interval being accumulated. When the current period
reaches 15 minutes, it's counts are rolled into the
previous entry and added to these values. The 97th entry,
previous to the 24 hour period is no longer included in
these counts."
::= { zhoneIsdnMib 4 }
-- 1.3.6.1.4.1.5504.5.7.1.4.1
isdnPerfDataTotalEntry OBJECT-TYPE
SYNTAX IsdnPerfDataTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in total performance table for each S/T interface."
AUGMENTS { isdnConfigEntry }
::= { isdnPerfDataTotalTable 1 }
IsdnPerfDataTotalEntry ::=
SEQUENCE {
isdnPerfTotalBadAmiViolation
PerfTotalCount,
isdnPerfTotalUnbalancedFrame
PerfTotalCount,
isdnPerTotalFsyncSeconds
PerfTotalCount,
isdnPerfTotalErrorSeconds
PerfTotalCount,
isdnPerfTotalTimePeriodsElapsed
Integer32
}
-- 1.3.6.1.4.1.5504.5.7.1.4.1.1
isdnPerfTotalBadAmiViolation OBJECT-TYPE
SYNTAX PerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of frames with incorrect number of AMI violations."
::= { isdnPerfDataTotalEntry 1 }
-- 1.3.6.1.4.1.5504.5.7.1.4.1.2
isdnPerfTotalUnbalancedFrame OBJECT-TYPE
SYNTAX PerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of unbalanced frames."
::= { isdnPerfDataTotalEntry 2 }
-- 1.3.6.1.4.1.5504.5.7.1.4.1.3
isdnPerTotalFsyncSeconds OBJECT-TYPE
SYNTAX PerfTotalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Frame synch error seconds."
::= { isdnPerfDataTotalEntry 3 }
-- 1.3.6.1.4.1.5504.5.7.1.4.1.4
isdnPerfTotalErrorSeconds OBJECT-TYPE
SYNTAX PerfTotalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ISDN Activation error seconds"
::= { isdnPerfDataTotalEntry 4 }
-- 1.3.6.1.4.1.5504.5.7.1.4.1.5
isdnPerfTotalTimePeriodsElapsed OBJECT-TYPE
SYNTAX Integer32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of 15 minute time periods that have been used
in the performance total table. This value is normally
96 indicating a valid 24 hour time period except in the
cases of a restart of this agent."
::= { isdnPerfDataTotalEntry 5 }
-- 1.3.6.1.4.1.5504.5.7.1.5
isdnAlarmProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF IsdnAlarmProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information for Alarm conditions.
The table is indexed by IfIndex . The alarm profile will be set
per port basis usig ifIndex by the application when the system comes up.
The operator can not create the profile , he can only change it .
"
::= { zhoneIsdnMib 5 }
-- 1.3.6.1.4.1.5504.5.7.1.5.1
isdnAlarmProfileEntry OBJECT-TYPE
SYNTAX IsdnAlarmProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in AlarmProfile Table.
"
AUGMENTS { isdnConfigEntry }
::= { isdnAlarmProfileTable 1 }
IsdnAlarmProfileEntry ::=
SEQUENCE {
isdnThresholdAmiViolations
Unsigned32,
isdnThresholdUnbalancedFrame
Unsigned32
}
-- 1.3.6.1.4.1.5504.5.7.1.5.1.1
isdnThresholdAmiViolations OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for number of AMI violation .
If the number of violations cross this
threshold then the notification is sent to NMS.
0 will disable the trap. The default value is 0.
There is no range speciffied for this."
::= { isdnAlarmProfileEntry 1 }
-- 1.3.6.1.4.1.5504.5.7.1.5.1.2
isdnThresholdUnbalancedFrame OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for number of unbalanced frame after which the trap will
be send to NMS.0 will disable the trap. The default value is 0.
There is no range speciffied for this.
"
::= { isdnAlarmProfileEntry 2 }
END
--
-- phyIsdn.mib
--
View Git Blame Copy Permalink