1287 lines
34 KiB
Plaintext
1287 lines
34 KiB
Plaintext
LUM-IFETH-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
DateAndTime
|
|
FROM SNMPv2-TC
|
|
lumModules, lumIfEthMIB
|
|
FROM LUM-REG
|
|
SignalStatusWithNA, FaultStatusWithNA, MgmtNameString,
|
|
OnOff, AutoNegotiationStatus, Unsigned32WithNA, FlowControlMode, RsFecMode, RsFecOnOff
|
|
FROM LUM-TC;
|
|
|
|
lumIfEthMIBModule MODULE-IDENTITY
|
|
LAST-UPDATED
|
|
"201706150000Z" -- June 15th 2017
|
|
ORGANIZATION
|
|
"Infinera Corporation"
|
|
CONTACT-INFO
|
|
"techsupport@infinera.com"
|
|
DESCRIPTION
|
|
"This module describes the ethernet.
|
|
|
|
The references refers to IEEE 802.3-2008 Part 3.
|
|
|
|
The tables contained in this MIB are:
|
|
|
|
(1) The General group contains some general attributes as time stamps
|
|
and tables sizes.
|
|
|
|
(2) The Physical group contains information and
|
|
configuration for the eth physical layer.
|
|
|
|
(3) The Mac group contains information and
|
|
configuration for the eth mac layer.
|
|
|
|
"
|
|
REVISION
|
|
"201706150000Z" -- June 15th 2017
|
|
DESCRIPTION
|
|
"Changes made for release r29.0:
|
|
- Changed ORGANIZATION and CONTACT-INFO"
|
|
REVISION
|
|
"201611300000Z" -- November 30th 2016
|
|
DESCRIPTION
|
|
"Changes made for release r28:
|
|
- Added tp100gotnii board.
|
|
- Added new table -RS-FEC."
|
|
REVISION
|
|
"201512220000Z" -- December 22nd 2015
|
|
DESCRIPTION
|
|
"Changes made for release r27:
|
|
- Added fhau1 board
|
|
- Added fha1u1 board"
|
|
REVISION
|
|
"201409300000Z" -- September 30th 2014
|
|
DESCRIPTION
|
|
"Changes made for release r23.1:
|
|
- Added mxp100gotn board.
|
|
- Added Rx/Tx HiBER attributes.
|
|
- Removed tpmrHL16G board."
|
|
REVISION
|
|
"201405160000Z" -- May 16th 2014
|
|
DESCRIPTION
|
|
"Changes made for release r23:
|
|
- Changed board name from tp10gotn to tphex10gotn.
|
|
- Added tpmrHL16G board"
|
|
REVISION
|
|
"201311150000Z" -- November 15th 2013
|
|
DESCRIPTION
|
|
"Changes made for release r22:
|
|
- Added tp10gotn, tp100gotn board."
|
|
REVISION
|
|
"201211200000Z" -- November 20th 2012
|
|
DESCRIPTION
|
|
"The initial revision of this module."
|
|
::= { lumModules 54 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Compliance area, containing groups and compliance
|
|
-- specifications.
|
|
-- ----------------------------------------------------
|
|
|
|
lumIfEthConfs OBJECT IDENTIFIER ::= { lumIfEthMIB 1 }
|
|
lumIfEthGroups OBJECT IDENTIFIER ::= { lumIfEthConfs 1 }
|
|
lumIfEthCompl OBJECT IDENTIFIER ::= { lumIfEthConfs 2 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Root for objects in the IFETH MIB
|
|
-- ----------------------------------------------------
|
|
|
|
lumIfEthMIBObjects OBJECT IDENTIFIER ::= { lumIfEthMIB 2 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- This MIB contains the following groups:
|
|
-- ----------------------------------------------------
|
|
|
|
ifEthGeneral OBJECT IDENTIFIER ::= { lumIfEthMIBObjects 1 }
|
|
ifEthPhysicalList OBJECT IDENTIFIER ::= { lumIfEthMIBObjects 2 }
|
|
ifEthMacList OBJECT IDENTIFIER ::= { lumIfEthMIBObjects 3 }
|
|
ifEthRsFecList OBJECT IDENTIFIER ::= { lumIfEthMIBObjects 4 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- General group
|
|
-- ----------------------------------------------------
|
|
|
|
ifEthGeneralConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the MIB was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifEthGeneral 1 }
|
|
|
|
ifEthGeneralStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state and/or configuration of the
|
|
MIB was last changed.
|
|
|
|
"
|
|
::= { ifEthGeneral 2 }
|
|
|
|
ifEthGeneralIfEthPhysicalTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of ifEthPhysical table.
|
|
|
|
"
|
|
::= { ifEthGeneral 3 }
|
|
|
|
ifEthGeneralIfEthPhysicalConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifEthGeneral 4 }
|
|
|
|
ifEthGeneralIfEthPhysicalStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state and/or configuration of the
|
|
table was last changed.
|
|
|
|
"
|
|
::= { ifEthGeneral 5 }
|
|
|
|
ifEthGeneralIfEthMacTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of ifeth mac table
|
|
|
|
"
|
|
::= { ifEthGeneral 6 }
|
|
|
|
ifEthGeneralIfEthMacConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifEthGeneral 7 }
|
|
|
|
ifEthGeneralIfEthMacStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state and/or the configuration
|
|
of the table was last changed.
|
|
|
|
"
|
|
::= { ifEthGeneral 8 }
|
|
|
|
ifEthGeneralIfEthRsFecTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of ifeth rsfec table
|
|
|
|
"
|
|
::= { ifEthGeneral 9 }
|
|
|
|
ifEthGeneralIfEthRsFecConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifEthGeneral 10 }
|
|
|
|
ifEthGeneralIfEthRsFecStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state and/or the configuration
|
|
of the table was last changed.
|
|
|
|
"
|
|
::= { ifEthGeneral 11 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- ETH PHYSICAL group
|
|
-- ----------------------------------------------------
|
|
|
|
ifEthPhysicalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfEthPhysicalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Physical group contains information and
|
|
configuration for the eth physical layer."
|
|
|
|
::= { ifEthPhysicalList 1 }
|
|
|
|
ifEthPhysicalEntry OBJECT-TYPE
|
|
SYNTAX IfEthPhysicalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ifEth physical list.
|
|
|
|
"
|
|
INDEX { ifEthPhysicalIndex }
|
|
::= { ifEthPhysicalTable 1 }
|
|
|
|
IfEthPhysicalEntry ::=
|
|
SEQUENCE {
|
|
ifEthPhysicalIndex Unsigned32,
|
|
ifEthPhysicalName MgmtNameString,
|
|
ifEthPhysicalConnIfBasicIfIndex Unsigned32WithNA,
|
|
ifEthPhysicalAutoNegotiationMode OnOff,
|
|
ifEthPhysicalAutoNegotiationStatus AutoNegotiationStatus,
|
|
ifEthPhysicalRxUtilization Unsigned32WithNA,
|
|
ifEthPhysicalTxUtilization Unsigned32WithNA,
|
|
ifEthPhysicalTxSignalStatus SignalStatusWithNA,
|
|
ifEthPhysicalRxSignalStatus SignalStatusWithNA,
|
|
ifEthPhysicalRemoteLinkFault FaultStatusWithNA,
|
|
ifEthPhysicalLocalLinkFault FaultStatusWithNA,
|
|
ifEthPhysicalLinkDown FaultStatusWithNA,
|
|
ifEthPhysicalHighBitErrorRate FaultStatusWithNA,
|
|
ifEthPhysicalPcsLossOfFrame FaultStatusWithNA,
|
|
ifEthPhysicalRxLocalLinkFault FaultStatusWithNA,
|
|
ifEthPhysicalTxLocalLinkFault FaultStatusWithNA,
|
|
ifEthPhysicalRxHighBitErrorRate FaultStatusWithNA,
|
|
ifEthPhysicalTxHighBitErrorRate FaultStatusWithNA,
|
|
ifEthPhysicalTxPcsLossOfFrame FaultStatusWithNA,
|
|
ifEthPhysicalUId Unsigned32,
|
|
ifEthPhysicalRxPcsLossOfSync FaultStatusWithNA,
|
|
ifEthPhysicalTxPcsLossOfSync FaultStatusWithNA }
|
|
|
|
ifEthPhysicalIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index assigned to each entry.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 1 }
|
|
|
|
ifEthPhysicalName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the optical transmission section,
|
|
for example 'physical:1:2:1-2', where the first number indicates
|
|
subrack, the second slot number and the third/fourth
|
|
are the physical port numbers.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 2 }
|
|
|
|
ifEthPhysicalConnIfBasicIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that describes to which index in ifBasicIf table
|
|
this object is related.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 3 }
|
|
|
|
ifEthPhysicalAutoNegotiationMode OBJECT-TYPE
|
|
SYNTAX OnOff
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The wanted auto negotiation mode.
|
|
|
|
off - auto negotiation process is disabled
|
|
|
|
on - auto negotiation process is enabled
|
|
|
|
notApplicable (2147483647) is used when attribute is
|
|
not used in current configuration.
|
|
|
|
"
|
|
DEFVAL { on }
|
|
::= { ifEthPhysicalEntry 4 }
|
|
|
|
ifEthPhysicalAutoNegotiationStatus OBJECT-TYPE
|
|
SYNTAX AutoNegotiationStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the auto negotiation procedure
|
|
|
|
incomplete - the result is still pending
|
|
|
|
halfDuplex - half duplex
|
|
|
|
fullDuplex - full duplex
|
|
|
|
halfDuplexRxPauseOn - half duplex, Rx pause on
|
|
|
|
halfDuplexTxPauseOn - half duplex, Tx pause on
|
|
|
|
halfDuplexRxTxPauseOn - half duplex, Rx and Tx
|
|
pause on
|
|
|
|
fullDuplexRxPauseOn - full duplex, Rx pause on
|
|
|
|
fullDuplexTxPauseOn - full duplex, Tx pause on
|
|
|
|
fullDuplexRxTxPauseOn - full duplex, Rx and Tx
|
|
pause on
|
|
|
|
fullDuplexFec - full duplex, forwarding error
|
|
correction
|
|
|
|
fec - forwarding error correction
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 5 }
|
|
|
|
ifEthPhysicalRxUtilization OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA (0..1000 | 2147483646 | 2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows a snapshot of the current bandwidth
|
|
utilization of the received ethernet signal during
|
|
the last second.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 6 }
|
|
|
|
ifEthPhysicalTxUtilization OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA (0..1000 | 2147483646 | 2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows a snapshot of the current bandwidth
|
|
utilization of the received ethernet signal during
|
|
the last second.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 7 }
|
|
|
|
ifEthPhysicalTxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for outgoing (TX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 8 }
|
|
|
|
ifEthPhysicalRxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for incoming (RX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 9 }
|
|
|
|
ifEthPhysicalRemoteLinkFault OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote link fault (RLF).
|
|
|
|
Reference: 1000Base-SX/LX: 37.2.1.5 RF1/RF2 IEEE 802.3ah
|
|
|
|
alarm: Active remote link fault indication.
|
|
|
|
ok: Inactive remote link fault indication.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 10 }
|
|
|
|
ifEthPhysicalLocalLinkFault OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Local link fault (LLF).
|
|
|
|
Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3
|
|
|
|
alarm: Active local link fault indication.
|
|
|
|
ok: Inactive local link fault indication.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 11 }
|
|
|
|
ifEthPhysicalLinkDown OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Link down.
|
|
|
|
alarm: Failure to negotiate a connection with the
|
|
other party.
|
|
|
|
ok: A connection is negotiated.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 12 }
|
|
|
|
ifEthPhysicalHighBitErrorRate OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High bit error rate (Hi-Ber), BER > 10^(-4).
|
|
|
|
Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah
|
|
|
|
alarm: Active high bit error rate.
|
|
|
|
ok: Inactive high bit error rate.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 13 }
|
|
|
|
ifEthPhysicalPcsLossOfFrame OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx PCS Loss of frame (block-lock).
|
|
|
|
Reference: 10GBase-R: 49.2.13.2.2
|
|
|
|
alarm: Active high bit error rate.
|
|
|
|
ok: Inactive high bit error rate.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 14 }
|
|
|
|
ifEthPhysicalRxLocalLinkFault OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Local link fault (LLF).
|
|
|
|
Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3
|
|
|
|
alarm: Active local link fault indication.
|
|
|
|
ok: Inactive local link fault indication.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 15 }
|
|
|
|
ifEthPhysicalTxLocalLinkFault OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Local link fault (LLF).
|
|
|
|
Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3
|
|
|
|
alarm: Active local link fault indication.
|
|
|
|
ok: Inactive local link fault indication.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 16 }
|
|
|
|
ifEthPhysicalRxHighBitErrorRate OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx High bit error rate (Hi-Ber), BER > 10^(-4).
|
|
|
|
Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah
|
|
|
|
alarm: Active high bit error rate.
|
|
|
|
ok: Inactive high bit error rate.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 17 }
|
|
|
|
ifEthPhysicalTxHighBitErrorRate OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx High bit error rate (Hi-Ber), BER > 10^(-4).
|
|
|
|
Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah
|
|
|
|
alarm: Active high bit error rate.
|
|
|
|
ok: Inactive high bit error rate.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 18 }
|
|
|
|
ifEthPhysicalTxPcsLossOfFrame OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx PCS Loss of frame (block-lock).
|
|
|
|
Reference: 10GBase-R: 49.2.13.2.2
|
|
|
|
alarm: Active high bit error rate.
|
|
|
|
ok: Inactive high bit error rate.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 19 }
|
|
|
|
|
|
ifEthPhysicalUId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An unique identifier assigned to each entry.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 20 }
|
|
|
|
|
|
ifEthPhysicalRxPcsLossOfSync OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RX PCS Loss of sync.
|
|
|
|
Reference: 1000Base-X: 36.2.5.2.6 IEEE 802.3
|
|
|
|
alarm: GbE 'frame' can not be located.
|
|
|
|
ok: GbE 'frame' is located.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 21 }
|
|
|
|
ifEthPhysicalTxPcsLossOfSync OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TX PCS Loss of sync.
|
|
|
|
Reference: 1000Base-X: 36.2.5.2.6 IEEE 802.3
|
|
|
|
alarm: GbE 'frame' can not be located.
|
|
|
|
ok: GbE 'frame' is located.
|
|
|
|
"
|
|
::= { ifEthPhysicalEntry 22 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- ETH MAC group
|
|
-- ----------------------------------------------------
|
|
|
|
ifEthMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfEthMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Mac group contains information and
|
|
configuration for the eth mac layer."
|
|
|
|
::= { ifEthMacList 1 }
|
|
|
|
ifEthMacEntry OBJECT-TYPE
|
|
SYNTAX IfEthMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ifEth mac list.
|
|
|
|
"
|
|
INDEX { ifEthMacIndex }
|
|
::= { ifEthMacTable 1 }
|
|
|
|
IfEthMacEntry ::=
|
|
SEQUENCE {
|
|
ifEthMacIndex Unsigned32,
|
|
ifEthMacName MgmtNameString,
|
|
ifEthMacConnIfBasicIfIndex Unsigned32WithNA,
|
|
ifEthMacRxUtilization Unsigned32WithNA,
|
|
ifEthMacTxUtilization Unsigned32WithNA,
|
|
ifEthMacMaxMtuSize Unsigned32WithNA,
|
|
ifEthMacInterPacketGap Unsigned32WithNA,
|
|
ifEthMacFlowControlMode FlowControlMode,
|
|
ifEthMacTxSignalStatus SignalStatusWithNA,
|
|
ifEthMacRxSignalStatus SignalStatusWithNA }
|
|
|
|
ifEthMacIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index assigned to each entry.
|
|
|
|
"
|
|
::= { ifEthMacEntry 1 }
|
|
|
|
ifEthMacName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the optical transmission section,
|
|
for example 'mac:1:2:1-2', where the first number indicates
|
|
subrack, the second slot number and the third/fourth
|
|
are the physical port numbers.
|
|
|
|
"
|
|
::= { ifEthMacEntry 2 }
|
|
|
|
ifEthMacConnIfBasicIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that describes to which index in ifBasicIf table
|
|
this object is related.
|
|
|
|
"
|
|
::= { ifEthMacEntry 3 }
|
|
|
|
ifEthMacRxUtilization OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA (0..1000 | 2147483646 | 2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows a snapshot of the current bandwidth
|
|
utilization of the received ethernet signal during
|
|
the last second.
|
|
|
|
"
|
|
::= { ifEthMacEntry 4 }
|
|
|
|
ifEthMacTxUtilization OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA (0..1000 | 2147483646 | 2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows a snapshot of the current bandwidth
|
|
utilization of the transmitted ethernet signal during
|
|
the last second.
|
|
|
|
"
|
|
::= { ifEthMacEntry 5 }
|
|
|
|
ifEthMacMaxMtuSize OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA (1518..9600 | 2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum size of the transmitted and
|
|
received frames (in bytes).
|
|
|
|
"
|
|
DEFVAL { 9600 }
|
|
::= { ifEthMacEntry 6 }
|
|
|
|
ifEthMacInterPacketGap OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA (64..456 | 2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time between the frames in nano seconds.
|
|
|
|
Legal values are 64, 72, 80, ... 200, 320, 328,
|
|
336, ... 456
|
|
|
|
"
|
|
DEFVAL { 96 }
|
|
::= { ifEthMacEntry 7 }
|
|
|
|
ifEthMacFlowControlMode OBJECT-TYPE
|
|
SYNTAX FlowControlMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode for handling flow control between
|
|
the local device and link partner.
|
|
|
|
The PAUSE settings has the following meaning
|
|
when auto-negotiation is enabled.
|
|
|
|
Setting 802.3 equivalent
|
|
------- ----------------
|
|
|
|
noPause No PAUSE.
|
|
|
|
txPause Asymmetric PAUSE toward link partner
|
|
(send only).
|
|
|
|
bothPause Symmetric PAUSE (send and receive).
|
|
|
|
rxPause Both symmetric PAUSE and asymmetric
|
|
PAUSE toward local device (send
|
|
and/or receive).
|
|
|
|
|
|
The PAUSE settings has the following meaning
|
|
when auto-negotiation is disabled.
|
|
|
|
Setting Result
|
|
------- ------
|
|
|
|
noPause PAUSE frame reception and transmission
|
|
is disabled.
|
|
|
|
txPause PAUSE frame transmission is enabled.
|
|
|
|
bothPause PAUSE frame reception and transmission
|
|
is enabled.
|
|
|
|
rxPause PAUSE frame reception is enabled.
|
|
|
|
"
|
|
DEFVAL { noPause }
|
|
::= { ifEthMacEntry 8 }
|
|
|
|
ifEthMacTxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for outgoing (TX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifEthMacEntry 9 }
|
|
|
|
ifEthMacRxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for incoming (RX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
notApplicable (2147483647) - Attribute is not
|
|
used in current configuration.
|
|
|
|
"
|
|
::= { ifEthMacEntry 10 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- ETH RS-FEC group
|
|
-- ----------------------------------------------------
|
|
|
|
ifEthRsFecTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfEthRsFecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RS-FEC group contains information and
|
|
configuration for the eth-rsFec error correction."
|
|
|
|
::= { ifEthRsFecList 1 }
|
|
|
|
ifEthRsFecEntry OBJECT-TYPE
|
|
SYNTAX IfEthRsFecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ifEth RS-Fec list.
|
|
|
|
"
|
|
INDEX { ifEthRsFecIndex }
|
|
::= { ifEthRsFecTable 1 }
|
|
|
|
IfEthRsFecEntry ::=
|
|
SEQUENCE {
|
|
ifEthRsFecIndex Unsigned32,
|
|
ifEthRsFecName MgmtNameString,
|
|
ifEthRsFecConnIfBasicIfIndex Unsigned32WithNA,
|
|
ifEthRsFecTxSignalStatus SignalStatusWithNA,
|
|
ifEthRsFecRxSignalStatus SignalStatusWithNA,
|
|
ifEthRsFecMode RsFecMode,
|
|
ifEthRsFecActualRsFec RsFecOnOff,
|
|
ifEthRsFecLanesAlignmentError FaultStatusWithNA}
|
|
|
|
ifEthRsFecIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index assigned to each entry.
|
|
|
|
"
|
|
::= { ifEthRsFecEntry 1 }
|
|
|
|
ifEthRsFecName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the RS-FEC object,
|
|
for example 'clientRsFec:1:2:1-2', where the first number
|
|
indicates subrack, the second slot number and the
|
|
third/fourth are the physical port numbers.
|
|
|
|
"
|
|
::= { ifEthRsFecEntry 2 }
|
|
|
|
ifEthRsFecConnIfBasicIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index describing to which index in ifBasicIf table
|
|
this object is related to.
|
|
|
|
"
|
|
::= { ifEthRsFecEntry 3 }
|
|
|
|
ifEthRsFecTxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for outgoing (TX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifEthRsFecEntry 4 }
|
|
|
|
ifEthRsFecRxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for incoming (RX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifEthRsFecEntry 5 }
|
|
|
|
ifEthRsFecMode OBJECT-TYPE
|
|
SYNTAX RsFecMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set RS-FEC mode.
|
|
|
|
auto - RS-FEC automatically enabled or disabled, according to detected transceiver type.
|
|
|
|
forced on - RS-FEC always enabled, regardless of the inserted transceiver type.
|
|
|
|
forced off - RS-FEC always disabled, regardless of the inserted transceiver type.
|
|
|
|
Default auto
|
|
|
|
"
|
|
DEFVAL { auto }
|
|
::= { ifEthRsFecEntry 6 }
|
|
|
|
ifEthRsFecActualRsFec OBJECT-TYPE
|
|
SYNTAX RsFecOnOff
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual RS-FEC configuration.
|
|
|
|
off - RS-FEC is disabled for inserted transceiver type.
|
|
on - RS-FEC is enabled for inserted transceiver type.
|
|
undefined - not possible to read attribute at the moment, no transceiver is detected.
|
|
|
|
"
|
|
DEFVAL { undefined }
|
|
::= { ifEthRsFecEntry 7 }
|
|
|
|
ifEthRsFecLanesAlignmentError OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FEC-lanes alignment error.
|
|
|
|
FEC-lanes alignment marker does not contain valid lane identification
|
|
bytes to identify the lanes as they are received.
|
|
|
|
Reference: IEEE 802.3/91.5.3
|
|
|
|
alarm: FEC-lanes have errors or defects.
|
|
|
|
ok: FEC-lanes alignment marker mapping and lanes reorder is ok.
|
|
|
|
|
|
"
|
|
::= { ifEthRsFecEntry 8 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Notifications
|
|
-- ----------------------------------------------------
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Object and event groups
|
|
-- ----------------------------------------------------
|
|
|
|
ifEthGeneralGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifEthGeneralConfigLastChangeTime,
|
|
ifEthGeneralStateLastChangeTime,
|
|
ifEthGeneralIfEthPhysicalTableSize,
|
|
ifEthGeneralIfEthPhysicalConfigLastChangeTime,
|
|
ifEthGeneralIfEthPhysicalStateLastChangeTime,
|
|
ifEthGeneralIfEthMacTableSize,
|
|
ifEthGeneralIfEthMacConfigLastChangeTime,
|
|
ifEthGeneralIfEthMacStateLastChangeTime }
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The general objects."
|
|
::= { lumIfEthGroups 1 }
|
|
|
|
ifEthPhysicalGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifEthPhysicalIndex,
|
|
ifEthPhysicalName,
|
|
ifEthPhysicalConnIfBasicIfIndex,
|
|
ifEthPhysicalAutoNegotiationMode,
|
|
ifEthPhysicalAutoNegotiationStatus,
|
|
ifEthPhysicalRxUtilization,
|
|
ifEthPhysicalTxUtilization,
|
|
ifEthPhysicalTxSignalStatus,
|
|
ifEthPhysicalRxSignalStatus,
|
|
ifEthPhysicalRemoteLinkFault,
|
|
ifEthPhysicalLocalLinkFault,
|
|
ifEthPhysicalLinkDown,
|
|
ifEthPhysicalHighBitErrorRate,
|
|
ifEthPhysicalPcsLossOfFrame }
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifEth PHYSICAL objects (R20.0)."
|
|
::= { lumIfEthGroups 2 }
|
|
|
|
ifEthMacGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifEthMacIndex,
|
|
ifEthMacName,
|
|
ifEthMacConnIfBasicIfIndex,
|
|
ifEthMacRxUtilization,
|
|
ifEthMacTxUtilization,
|
|
ifEthMacMaxMtuSize,
|
|
ifEthMacInterPacketGap,
|
|
ifEthMacFlowControlMode,
|
|
ifEthMacTxSignalStatus,
|
|
ifEthMacRxSignalStatus }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifEth MAC objects (R20.0)."
|
|
::= { lumIfEthGroups 3 }
|
|
|
|
ifEthPhysicalGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifEthPhysicalIndex,
|
|
ifEthPhysicalName,
|
|
ifEthPhysicalConnIfBasicIfIndex,
|
|
ifEthPhysicalAutoNegotiationMode,
|
|
ifEthPhysicalAutoNegotiationStatus,
|
|
ifEthPhysicalRxUtilization,
|
|
ifEthPhysicalTxUtilization,
|
|
ifEthPhysicalTxSignalStatus,
|
|
ifEthPhysicalRxSignalStatus,
|
|
ifEthPhysicalRemoteLinkFault,
|
|
ifEthPhysicalLocalLinkFault,
|
|
ifEthPhysicalLinkDown,
|
|
ifEthPhysicalHighBitErrorRate,
|
|
ifEthPhysicalPcsLossOfFrame,
|
|
ifEthPhysicalRxLocalLinkFault,
|
|
ifEthPhysicalTxLocalLinkFault }
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifEth PHYSICAL objects (R20.0)."
|
|
::= { lumIfEthGroups 4 }
|
|
|
|
ifEthPhysicalGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifEthPhysicalIndex,
|
|
ifEthPhysicalName,
|
|
ifEthPhysicalConnIfBasicIfIndex,
|
|
ifEthPhysicalAutoNegotiationMode,
|
|
ifEthPhysicalAutoNegotiationStatus,
|
|
ifEthPhysicalRxUtilization,
|
|
ifEthPhysicalTxUtilization,
|
|
ifEthPhysicalTxSignalStatus,
|
|
ifEthPhysicalRxSignalStatus,
|
|
ifEthPhysicalRemoteLinkFault,
|
|
ifEthPhysicalLocalLinkFault,
|
|
ifEthPhysicalLinkDown,
|
|
ifEthPhysicalHighBitErrorRate,
|
|
ifEthPhysicalPcsLossOfFrame,
|
|
ifEthPhysicalRxLocalLinkFault,
|
|
ifEthPhysicalTxLocalLinkFault,
|
|
ifEthPhysicalRxHighBitErrorRate,
|
|
ifEthPhysicalTxHighBitErrorRate }
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifEth PHYSICAL objects (R23.1)."
|
|
::= { lumIfEthGroups 5 }
|
|
|
|
|
|
ifEthPhysicalGroupV4 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifEthPhysicalIndex,
|
|
ifEthPhysicalName,
|
|
ifEthPhysicalConnIfBasicIfIndex,
|
|
ifEthPhysicalAutoNegotiationMode,
|
|
ifEthPhysicalAutoNegotiationStatus,
|
|
ifEthPhysicalRxUtilization,
|
|
ifEthPhysicalTxUtilization,
|
|
ifEthPhysicalTxSignalStatus,
|
|
ifEthPhysicalRxSignalStatus,
|
|
ifEthPhysicalRemoteLinkFault,
|
|
ifEthPhysicalLocalLinkFault,
|
|
ifEthPhysicalLinkDown,
|
|
ifEthPhysicalHighBitErrorRate,
|
|
ifEthPhysicalPcsLossOfFrame,
|
|
ifEthPhysicalRxLocalLinkFault,
|
|
ifEthPhysicalTxLocalLinkFault,
|
|
ifEthPhysicalRxHighBitErrorRate,
|
|
ifEthPhysicalTxHighBitErrorRate,
|
|
ifEthPhysicalTxPcsLossOfFrame }
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifEth PHYSICAL objects (R24)."
|
|
::= { lumIfEthGroups 6 }
|
|
|
|
|
|
ifEthPhysicalGroupV5 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifEthPhysicalIndex,
|
|
ifEthPhysicalName,
|
|
ifEthPhysicalConnIfBasicIfIndex,
|
|
ifEthPhysicalAutoNegotiationMode,
|
|
ifEthPhysicalAutoNegotiationStatus,
|
|
ifEthPhysicalRxUtilization,
|
|
ifEthPhysicalTxUtilization,
|
|
ifEthPhysicalTxSignalStatus,
|
|
ifEthPhysicalRxSignalStatus,
|
|
ifEthPhysicalRemoteLinkFault,
|
|
ifEthPhysicalLocalLinkFault,
|
|
ifEthPhysicalLinkDown,
|
|
ifEthPhysicalHighBitErrorRate,
|
|
ifEthPhysicalPcsLossOfFrame,
|
|
ifEthPhysicalRxLocalLinkFault,
|
|
ifEthPhysicalTxLocalLinkFault,
|
|
ifEthPhysicalRxHighBitErrorRate,
|
|
ifEthPhysicalTxHighBitErrorRate,
|
|
ifEthPhysicalTxPcsLossOfFrame,
|
|
ifEthPhysicalUId,
|
|
ifEthPhysicalRxPcsLossOfSync,
|
|
ifEthPhysicalTxPcsLossOfSync }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifEth PHYSICAL objects (R27.1)."
|
|
::= { lumIfEthGroups 7 }
|
|
|
|
ifEthRsFecGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifEthRsFecIndex,
|
|
ifEthRsFecName,
|
|
ifEthRsFecConnIfBasicIfIndex,
|
|
ifEthRsFecTxSignalStatus,
|
|
ifEthRsFecRxSignalStatus,
|
|
ifEthRsFecMode,
|
|
ifEthRsFecActualRsFec,
|
|
ifEthRsFecLanesAlignmentError}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifEth RS-FEC objects (R28.0)."
|
|
::= { lumIfEthGroups 8 }
|
|
|
|
ifEthGeneralGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifEthGeneralConfigLastChangeTime,
|
|
ifEthGeneralStateLastChangeTime,
|
|
ifEthGeneralIfEthPhysicalTableSize,
|
|
ifEthGeneralIfEthPhysicalConfigLastChangeTime,
|
|
ifEthGeneralIfEthPhysicalStateLastChangeTime,
|
|
ifEthGeneralIfEthMacTableSize,
|
|
ifEthGeneralIfEthMacConfigLastChangeTime,
|
|
ifEthGeneralIfEthMacStateLastChangeTime,
|
|
ifEthGeneralIfEthRsFecTableSize,
|
|
ifEthGeneralIfEthRsFecConfigLastChangeTime,
|
|
ifEthGeneralIfEthRsFecStateLastChangeTime}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The general objects."
|
|
::= { lumIfEthGroups 9 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Compliance
|
|
-- ----------------------------------------------------
|
|
|
|
lumIfEthComplV1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifEth MIB. (R20.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifEthGeneralGroupV1,
|
|
ifEthPhysicalGroupV1,
|
|
ifEthMacGroupV1 }
|
|
::= { lumIfEthCompl 1 }
|
|
|
|
lumIfEthComplV2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifEth MIB. (R20.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifEthGeneralGroupV1,
|
|
ifEthPhysicalGroupV2,
|
|
ifEthMacGroupV1 }
|
|
::= { lumIfEthCompl 2 }
|
|
|
|
lumIfEthComplV3 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifEth MIB. (R23.1)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifEthGeneralGroupV1,
|
|
ifEthPhysicalGroupV3,
|
|
ifEthMacGroupV1 }
|
|
::= { lumIfEthCompl 3 }
|
|
|
|
lumIfEthComplV4 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifEth MIB. (R24)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifEthGeneralGroupV1,
|
|
ifEthPhysicalGroupV4,
|
|
ifEthMacGroupV1 }
|
|
::= { lumIfEthCompl 4 }
|
|
|
|
lumIfEthComplV5 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifEth MIB. (R27.1)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifEthGeneralGroupV1,
|
|
ifEthPhysicalGroupV5,
|
|
ifEthMacGroupV1 }
|
|
::= { lumIfEthCompl 5 }
|
|
|
|
lumIfEthComplV6 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifEth MIB. (R27.1)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifEthGeneralGroupV1,
|
|
ifEthPhysicalGroupV5,
|
|
ifEthMacGroupV1,
|
|
ifEthRsFecGroupV1 }
|
|
::= { lumIfEthCompl 6 }
|
|
|
|
lumIfEthComplV7 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifEth MIB. (R28.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifEthGeneralGroupV2,
|
|
ifEthPhysicalGroupV5,
|
|
ifEthMacGroupV1,
|
|
ifEthRsFecGroupV1 }
|
|
::= { lumIfEthCompl 7 }
|
|
|
|
END
|
|
|