1034 lines
31 KiB
Plaintext
1034 lines
31 KiB
Plaintext
-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00
|
|
|
|
|
|
-- (C)opyright 1991-2014 bintec elmeg GmbH, All Rights Reserved
|
|
-- $RCSfile: mibcapi,v $
|
|
-- $Revision: 1.28 $
|
|
|
|
BIANCA-BRICK-CAPI-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Counter, enterprises
|
|
FROM RFC1155-SMI
|
|
|
|
DisplayString
|
|
FROM RFC1158-MIB
|
|
|
|
BitValue, HexValue
|
|
FROM BINTEC-MIB
|
|
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
bintec OBJECT IDENTIFIER ::= { enterprises 272 }
|
|
bibo OBJECT IDENTIFIER ::= { bintec 4 }
|
|
capi OBJECT IDENTIFIER
|
|
::= { bibo 7 }
|
|
|
|
|
|
-- CAPI Group
|
|
|
|
-- Management Information for the CAPI Subsystem of the BIANCA/BRICK
|
|
|
|
capiApplTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CapiApplEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The capiApplTable contains information for all currently
|
|
registered CAPI 1.1 and CAPI 2.0 applications, and their
|
|
respective CAPI_REGISTER information.
|
|
|
|
Creating entries: Entries are created automatically by
|
|
the system. After receiving an appropriate
|
|
CAPI_REGISTER call, the system 'registers' the
|
|
application, and assigns it a unique capiApplNumber.
|
|
|
|
Deleting entries: Once an application releases, entries
|
|
are automatically removed by the system."
|
|
::= { capi 1 }
|
|
|
|
capiApplEntry OBJECT-TYPE
|
|
SYNTAX CapiApplEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
""
|
|
INDEX { capiApplNumber }
|
|
::= { capiApplTable 1 }
|
|
|
|
CapiApplEntry ::=
|
|
SEQUENCE {
|
|
capiApplNumber INTEGER,
|
|
capiApplVersion INTEGER,
|
|
capiApplByteOrder INTEGER,
|
|
capiApplRegMsgCnt INTEGER,
|
|
capiApplRegLevel3Cnt INTEGER,
|
|
capiApplRegDblkCnt INTEGER,
|
|
capiApplRegDblkSize INTEGER,
|
|
capiApplInfoStr DisplayString
|
|
}
|
|
|
|
capiApplNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Identification number of the registered application."
|
|
::= { capiApplEntry 1 }
|
|
|
|
capiApplVersion OBJECT-TYPE
|
|
SYNTAX INTEGER { capi11(1), capi20(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The version number of the registered application."
|
|
DEFVAL { capi20 }
|
|
::= { capiApplEntry 2 }
|
|
|
|
capiApplByteOrder OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
little-endian(1),
|
|
big-endian(2),
|
|
undef(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The byte order used by the application."
|
|
DEFVAL { little-endian }
|
|
::= { capiApplEntry 3 }
|
|
|
|
capiApplRegLevel3Cnt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"CAPI_REGISTER: The number of level 3 connections
|
|
this application accepts."
|
|
::= { capiApplEntry 4 }
|
|
|
|
capiApplRegMsgCnt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"CAPI_REGISTER: The number of registered CAPI
|
|
messages this application accepts."
|
|
::= { capiApplEntry 5 }
|
|
|
|
capiApplRegDblkCnt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"CAPI_REGISTER: The number of registered B3 data
|
|
blocks this application accepts."
|
|
::= { capiApplEntry 6 }
|
|
|
|
capiApplRegDblkSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"CAPI_REGISTER: The size of registered B3 data
|
|
blocks this application accepts."
|
|
::= { capiApplEntry 7 }
|
|
|
|
capiApplInfoStr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Information string of CAPI instance: IP address and TCP port
|
|
of connecting system and user name if any."
|
|
::= { capiApplEntry 8 }
|
|
|
|
capiListenTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CapiListenEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The capiListenTable contains the listen settings for each
|
|
CAPI application.
|
|
|
|
Creating entries: Entries can only be created by the
|
|
system and is performed automatically upon receiving a
|
|
CAPI_LISTEN_REQ message.
|
|
|
|
Deleting entries: Entries are automatically removed
|
|
by the system once the application releases."
|
|
::= { capi 2 }
|
|
|
|
|
|
capiListenEntry OBJECT-TYPE
|
|
SYNTAX CapiListenEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
""
|
|
INDEX { capiListenApplication }
|
|
::= { capiListenTable 1 }
|
|
|
|
CapiListenEntry ::=
|
|
SEQUENCE {
|
|
capiListenApplication INTEGER,
|
|
capiListenController HexValue,
|
|
capiListenServiceMask HexValue,
|
|
capiListenEazMask HexValue,
|
|
capiListenInfoMask HexValue,
|
|
capiListenCipMask HexValue,
|
|
capiListenCipMask2 HexValue
|
|
}
|
|
|
|
capiListenApplication OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The application-number (capiApplNumber)."
|
|
::= { capiListenEntry 1 }
|
|
|
|
capiListenController OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The ISDN controller number. This value refers to the
|
|
isdnStkNumber."
|
|
::= { capiListenEntry 2 }
|
|
|
|
capiListenServiceMask OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The bit mask of CAPI 1.1 listen services. Specifies
|
|
which 1TR6 services to listen for (CAPI 1.1 only)."
|
|
::= { capiListenEntry 3 }
|
|
|
|
capiListenEazMask OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The bit mask of CAPI 1.1 listen-EAZs (CAPI 1.1 only)."
|
|
::= { capiListenEntry 4 }
|
|
|
|
capiListenInfoMask OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The bit mask of the CAPI 1.1/2.0 listen InfoMask setting.
|
|
The purpose of infomask is to specify the type of
|
|
information for a physical connection or controller which
|
|
will be provided by CAPI."
|
|
::= { capiListenEntry 5 }
|
|
|
|
capiListenCipMask OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The bit mask of CAPI 2.0 listen CIPMask. The purpose
|
|
of the CIPMask parameter is to select basic classes of
|
|
incoming calls. CAPI 2.0 applications only."
|
|
::= { capiListenEntry 6 }
|
|
|
|
capiListenCipMask2 OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The bit mask of CAPI 2.0 listen CIPMask."
|
|
::= { capiListenEntry 7 }
|
|
|
|
|
|
capiPlciTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CapiPlciEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The capiPlciTable contains information for each currently
|
|
connected CAPI application (i.e. has a Physical Link
|
|
Connection Identifier associated with it).
|
|
|
|
Creating entries: Entries can only be made by the
|
|
system. Upon receiving a CAPI_CONNECT_REQ (or
|
|
CAPI_CONNECT_IND) message, the system assigns a
|
|
unique PLCI (capiPlciNumber) and an entry is made.
|
|
|
|
Deleting entries: Entries are automatically deleted by
|
|
the system once a CAPI_DISCONNECT_RESP message
|
|
is received."
|
|
::= { capi 3 }
|
|
|
|
capiPlciEntry OBJECT-TYPE
|
|
SYNTAX CapiPlciEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
""
|
|
INDEX { capiPlciNumber }
|
|
::= { capiPlciTable 1 }
|
|
|
|
CapiPlciEntry ::=
|
|
SEQUENCE {
|
|
capiPlciNumber HexValue,
|
|
capiPlciApplication INTEGER,
|
|
capiPlciController HexValue,
|
|
capiPlciState INTEGER,
|
|
capiPlciSelectB2Proto INTEGER,
|
|
capiPlciSelectB2Dlpd OCTET STRING,
|
|
capiPlciSelectB3Proto INTEGER,
|
|
capiPlciSelectB3Ncpd OCTET STRING,
|
|
capiPlciB1Proto INTEGER,
|
|
capiPlciB1Config OCTET STRING,
|
|
capiPlciB2Proto INTEGER,
|
|
capiPlciB2Config OCTET STRING,
|
|
capiPlciB3Proto INTEGER,
|
|
capiPlciB3Config OCTET STRING,
|
|
capiPlciInfoMask HexValue,
|
|
capiPlciCipValue INTEGER
|
|
}
|
|
|
|
capiPlciNumber OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
" The PLCI (physical link connection identifier) of the
|
|
application."
|
|
::= { capiPlciEntry 1 }
|
|
|
|
capiPlciApplication OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The application-number (capiApplNumber)."
|
|
::= { capiPlciEntry 2 }
|
|
|
|
capiPlciController OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The ISDN controller number. This value refers to the
|
|
isdnStkNumber."
|
|
::= { capiPlciEntry 3 }
|
|
|
|
capiPlciState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
p-0(1), p-1(2), p-2(3),
|
|
p-3(4), p-4(5), p-5(6),
|
|
p-6(7), p-7(8), p-act(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The current link state as described in the CAPI state
|
|
diagram."
|
|
DEFVAL { p-0 }
|
|
::= { capiPlciEntry 4 }
|
|
|
|
capiPlciSelectB2Proto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undef(1),
|
|
x75(2), hdlccrc(3), trans(4),
|
|
sdlc(5), x75btx(6), fax(7), lapd(8),
|
|
v110trans(9), v110sdlc(10), v110x75(11),
|
|
txonly(12), modem(241), v110sync(242)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The current B2 protocol setting (CAPI 1.1 applications
|
|
only)."
|
|
DEFVAL { undef }
|
|
::= { capiPlciEntry 5 }
|
|
|
|
capiPlciSelectB2Dlpd OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Current B2 protocol descriptor. DLPD = data link
|
|
protocol descriptor (CAPI 1.1 applications only)."
|
|
::= { capiPlciEntry 6 }
|
|
|
|
capiPlciSelectB3Proto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undef(1),
|
|
t70nl(2), iso8208(3), t90(4),
|
|
trans(5), t30(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Current B3 protocol setting (CAPI 1.1 applications
|
|
only)."
|
|
DEFVAL { undef }
|
|
::= { capiPlciEntry 7 }
|
|
|
|
capiPlciSelectB3Ncpd OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The current B3 Ncpd setting. NCPD = network control
|
|
protocol descriptor (CAPI 1.1 applications only)."
|
|
::= { capiPlciEntry 8 }
|
|
|
|
capiPlciB1Proto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undef(1),
|
|
hdlc(2), trans(3), v110trans(4),
|
|
v110hdlc(5), faxg3(6), hdlcinv(7),
|
|
hdlc56(8), modemneg(9), modemasync(10),
|
|
modemsync(11)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Current CAPI 2.0 B1 protocol setting."
|
|
DEFVAL { undef }
|
|
::= { capiPlciEntry 9 }
|
|
|
|
capiPlciB1Config OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Current CAPI 2.0 B1 protocol configuration setting."
|
|
::= { capiPlciEntry 10 }
|
|
|
|
capiPlciB2Proto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undef(1),
|
|
x75(2), trans(3), sdlc(4),
|
|
lapd(5), t30(6), ppp(7),
|
|
transerr(8), modem(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Current CAPI 2.0 B2 protocol setting."
|
|
DEFVAL { undef }
|
|
::= { capiPlciEntry 11 }
|
|
|
|
capiPlciB2Config OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Current CAPI 2.0 B2 protocol configuration setting."
|
|
::= { capiPlciEntry 12 }
|
|
|
|
capiPlciB3Proto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undef(1),
|
|
trans(2), t90(3), iso8208(4),
|
|
x25dce(5), t30(6), t30ext(7),
|
|
modem(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Current CAPI 2.0 B3 protocol setting."
|
|
DEFVAL { undef }
|
|
::= { capiPlciEntry 13 }
|
|
|
|
capiPlciB3Config OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Current CAPI 2.0 B3 protocol configuration setting."
|
|
::= { capiPlciEntry 14 }
|
|
|
|
capiPlciCipValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The current CIPValue setting."
|
|
::= { capiPlciEntry 15 }
|
|
|
|
capiPlciInfoMask OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The current InfoMask setting."
|
|
::= { capiPlciEntry 16 }
|
|
|
|
capiNcciTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CapiNcciEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The capiNcciTable contains information for each CAPI
|
|
NCCI (network control connection identifier). An NCCI
|
|
describes a logical connection on level 3. Several NCCIs
|
|
operating on the same PLCI may exist.
|
|
|
|
Creating entries: As soon as a CAPI_CONNECT_B3_REQ
|
|
(or CAPI_CONNECT_B3_IND) message is received,
|
|
the system creates an entry by assigning the
|
|
application a unique capiNcciNumber.
|
|
|
|
Deleting entries: Entries are automatically deleted by
|
|
the system once a CAPI_DISCONNECT_B3_RESP
|
|
message is received."
|
|
::= { capi 4 }
|
|
|
|
capiNcciEntry OBJECT-TYPE
|
|
SYNTAX CapiNcciEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
""
|
|
INDEX { capiNcciNumber }
|
|
::= { capiNcciTable 1 }
|
|
|
|
CapiNcciEntry ::=
|
|
SEQUENCE {
|
|
capiNcciNumber HexValue,
|
|
capiNcciApplication INTEGER,
|
|
capiNcciPlci HexValue,
|
|
capiNcciState INTEGER
|
|
}
|
|
|
|
capiNcciNumber OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The NCCI number assigned by the system."
|
|
::= { capiNcciEntry 1 }
|
|
|
|
capiNcciApplication OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The application number (capiApplNumber)."
|
|
::= { capiNcciEntry 2 }
|
|
|
|
capiNcciPlci OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The CAPI PLCI number (capiPlciNumber)."
|
|
::= { capiNcciEntry 3 }
|
|
|
|
capiNcciState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
n-0(1), n-1(2), n-2(3),
|
|
n-3(4), n-4(5), n-5(6),
|
|
n-act(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The current state of the NCCI, as described in the
|
|
CAPI state diagram."
|
|
DEFVAL { n-0 }
|
|
::= { capiNcciEntry 4 }
|
|
|
|
capiInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CapiInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The capiInfoTable contains the last 10 CAPI info codes
|
|
and their message identifiers for where the error occured.
|
|
The most recent message is at inx 09 with older messages
|
|
rolling off the top of the table, i.e. inx 00.
|
|
|
|
Creating entries: Entries are created automatically by
|
|
the system once a CAPI info code is received by a
|
|
registered application.
|
|
|
|
Deleting entries: Entries are removed automatically
|
|
by the system."
|
|
::= { capi 5 }
|
|
|
|
capiInfoEntry OBJECT-TYPE
|
|
SYNTAX CapiInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
""
|
|
INDEX { capiInfoApplication }
|
|
::= { capiInfoTable 1 }
|
|
|
|
CapiInfoEntry ::=
|
|
SEQUENCE {
|
|
capiInfoApplication INTEGER,
|
|
capiInfoPlci HexValue,
|
|
capiInfoNcci HexValue,
|
|
capiInfoC1Command INTEGER,
|
|
capiInfoC2Command INTEGER,
|
|
capiInfoSubCommand INTEGER,
|
|
capiInfoNumber HexValue
|
|
}
|
|
|
|
capiInfoApplication OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The application number (capiApplNumber)."
|
|
::= { capiInfoEntry 1 }
|
|
|
|
capiInfoPlci OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The CAPI PLCI number (capiPlciNumber)."
|
|
::= { capiInfoEntry 2 }
|
|
|
|
capiInfoNcci OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The NCCI number (capiNcciNumber)."
|
|
::= { capiInfoEntry 3 }
|
|
|
|
capiInfoC1Command OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
resetb3(1), connect(2), conact(3),
|
|
disc(4), listen(5), param(6),
|
|
info(7), data(8), conninfo(9),
|
|
dtmf(10), selb2(64), selb3(128),
|
|
listenb3(129), conb3(130), conb3act(131),
|
|
discb3(132), b3param(133), datab3(134),
|
|
handset(135)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The CAPI 1.1 command where the info occurred."
|
|
DEFVAL { info }
|
|
::= { capiInfoEntry 4 }
|
|
|
|
capiInfoC2Command OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
alert(1), connect(2), conact(3),
|
|
disc(4), listen(5), info(8),
|
|
selectb(65), facility(128), conb3(130),
|
|
conb3act(131), discb3(132), datab3(134),
|
|
resetb3(135), conb3t90(136), manufact(255)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The CAPI 2.0 command where the info occurred."
|
|
DEFVAL { info }
|
|
::= { capiInfoEntry 5 }
|
|
|
|
capiInfoSubCommand OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
req(1), conf(2), ind(3), resp(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The CAPI 1.1/2.0 subcommand."
|
|
DEFVAL { ind }
|
|
::= { capiInfoEntry 6 }
|
|
|
|
capiInfoNumber OBJECT-TYPE
|
|
SYNTAX HexValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The info value as specified in the CAPI 1.1/2.0
|
|
specification. See the Software Reference Manual for a
|
|
listing of CAPI 1.1 and CAPI 2.0 info values."
|
|
::= { capiInfoEntry 7 }
|
|
|
|
capiConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CapiConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The capiConfigTable contains configuration information
|
|
for each ISDN stack. Setting these fields is optional, and
|
|
is not required.
|
|
|
|
Creating entries: Entries are created automatically by
|
|
the system when a new ISDN stack is initialised in the
|
|
isdnStkTable.
|
|
|
|
Deleting entries: An entry can be removed by assigning
|
|
the value `delete' to its capiConfigFaxG3RcvSpeed object.
|
|
It can be removed only if there is no entry with it's
|
|
capiConfigStkNumber in the isdnStkTable."
|
|
::= { capi 6 }
|
|
|
|
capiConfigEntry OBJECT-TYPE
|
|
SYNTAX CapiConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
""
|
|
INDEX { capiConfigStkNumber }
|
|
::= { capiConfigTable 1 }
|
|
|
|
CapiConfigEntry ::=
|
|
SEQUENCE {
|
|
capiConfigStkNumber INTEGER,
|
|
capiConfigFaxG3RcvSpeed INTEGER,
|
|
capiConfigFaxG3ECM INTEGER,
|
|
capiConfigFaxG3Header INTEGER,
|
|
capiConfigVoiceCoding INTEGER,
|
|
capiConfigSendAlerting INTEGER,
|
|
capiConfigV42bis INTEGER,
|
|
capiConfigModemDefault INTEGER,
|
|
capiConfigFaxModulation INTEGER,
|
|
capiConfigFax12000 INTEGER,
|
|
capiConfigFaxTXLevel INTEGER
|
|
}
|
|
|
|
capiConfigStkNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The isdnStkNumber this configuration belongs to."
|
|
::= { capiConfigEntry 1 }
|
|
|
|
capiConfigFaxG3RcvSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
r4800(1), r7200(2), r9600(3), r14400(4), maximum(5),
|
|
not-available(6), delete(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The G3 facsimile receive speed. For CM-EBRI this
|
|
should be set to maximum.
|
|
Set this field to `delete' to remove this entry.
|
|
The entry can be deleted only if there is no entry
|
|
with it's capiConfigStkNumber in the isdnStkTable."
|
|
DEFVAL { maximum }
|
|
::= { capiConfigEntry 2 }
|
|
|
|
capiConfigFaxG3ECM OBJECT-TYPE
|
|
SYNTAX INTEGER { on(1), off(2), not-available(3) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Specifies whether ECM (error correction mode)
|
|
should be used for G3 facsimile transmissions."
|
|
DEFVAL { on }
|
|
::= { capiConfigEntry 3 }
|
|
|
|
capiConfigFaxG3Header OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
logo-header(1), no-logo(2), no-header(3), not-available(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Specifies whether the header-line and logo
|
|
('BIANCA/FAX'), should appear on outgoing facsimiles. The
|
|
value 'logo_header' allows the header-line and the logo
|
|
to be printed on the top of each page."
|
|
DEFVAL { logo-header }
|
|
::= { capiConfigEntry 4 }
|
|
|
|
capiConfigVoiceCoding OBJECT-TYPE
|
|
SYNTAX INTEGER { normal(1), reverse(2) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Switches the bit order for voice-data."
|
|
DEFVAL { reverse }
|
|
::= { capiConfigEntry 5 }
|
|
|
|
capiConfigSendAlerting OBJECT-TYPE
|
|
SYNTAX INTEGER { never(1), ever(2), voice-only(3) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"For CAPI 1.1 this specifies when the CAPI server
|
|
should send alert messages for incoming calls."
|
|
DEFVAL { voice-only }
|
|
::= { capiConfigEntry 6 }
|
|
|
|
capiConfigV42bis OBJECT-TYPE
|
|
SYNTAX INTEGER { on(1), off(2), not-available(3) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Specifies whether V.42bis data compression should be
|
|
used. If data compression is activated here,the receiving
|
|
or sending side is first queried whether it supports data
|
|
compression. The BRICK supports V.42bis data
|
|
compression using up to 2 B-channels."
|
|
DEFVAL { off }
|
|
::= { capiConfigEntry 7 }
|
|
|
|
capiConfigModemDefault OBJECT-TYPE
|
|
SYNTAX INTEGER { modem-profile-1(1), modem-profile-2(2),
|
|
modem-profile-3(3), modem-profile-4(4),
|
|
modem-profile-5(5), modem-profile-6(6),
|
|
modem-profile-7(7), modem-profile-8(8)}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Specifies the modem profile of the mdmProfileTable
|
|
which contains the default modem parameters to use
|
|
for modem connections."
|
|
DEFVAL { modem-profile-1 }
|
|
::= { capiConfigEntry 8 }
|
|
|
|
capiConfigFaxModulation OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER { v17(1), v33(2), v29(3), v17s(5), v33s(6) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Set the default transmission protocol for fax.
|
|
- v17 max. 14400 Bps new standard
|
|
- v33 max. 14000 Bps early standard
|
|
- v29 max. 9600 Bps fax standard
|
|
- v17s v17 with Swiss capability
|
|
- v33s v33 with Swiss capability"
|
|
DEFVAL { v17 }
|
|
::= { capiConfigEntry 9 }
|
|
|
|
capiConfigFax12000 OBJECT-TYPE
|
|
SYNTAX INTEGER { on(1), off(2)}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Enable or disable the 12000Bps Mode for fax transmission.
|
|
A lot of fax receivers have problems with this tranmission
|
|
mode. Default value is off"
|
|
DEFVAL { off }
|
|
::= { capiConfigEntry 10 }
|
|
|
|
capiConfigFaxTXLevel OBJECT-TYPE
|
|
SYNTAX INTEGER { db0(1), db3(2),db6(3),db9(4),db12(5),db15(6)}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Set the transmit level to -x dB db0 = 0dB, db3 = -3dB.
|
|
In Germany -6dB (db6) is normally used for facsimile
|
|
transmission."
|
|
DEFVAL { db6 }
|
|
::= { capiConfigEntry 11 }
|
|
|
|
capiMultiControllerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CapiMultiControllerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains mappings between controller numbers
|
|
used by CAPI applications and the ISDN stacks available on
|
|
the BRICK (i.e., the Number field of the isdnStkTable).
|
|
The Version field specifies whether an entry applies to
|
|
CAPI 1.1 or CAPI 2.0 applications.
|
|
|
|
If a CAPI 1.1 entry is not defined, CAPI 1.1 applications
|
|
can only use isdnStkNumber N if N is the controller number
|
|
requested by the application.
|
|
|
|
If a CAPI 2.0 entry is not defined, CAPI 2.0 applications
|
|
can only use isdnStkNumber N-1 if N is the controller number
|
|
requested by the application.
|
|
|
|
Creating entries: Entries are created by assigning a
|
|
value to the capiControllerNumber object.
|
|
|
|
Deleting entries: An entry can be removed by assigning
|
|
the value `delete' to its capiControllerVersion object."
|
|
::= { capi 7 }
|
|
|
|
capiMultiControllerEntry OBJECT-TYPE
|
|
SYNTAX CapiMultiControllerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
""
|
|
INDEX { capiControllerNumber }
|
|
::= { capiMultiControllerTable 1 }
|
|
|
|
CapiMultiControllerEntry ::=
|
|
SEQUENCE {
|
|
capiControllerNumber INTEGER,
|
|
capiControllerStkMask BitValue,
|
|
capiControllerVersion INTEGER
|
|
}
|
|
|
|
capiControllerNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"The controller number requested by the CAPI application."
|
|
::= { capiMultiControllerEntry 1 }
|
|
|
|
capiControllerStkMask OBJECT-TYPE
|
|
SYNTAX BitValue
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"This binary number defines the ISDN stack(s) to use for
|
|
the specified CAPI 1.1 or CAPI 2.0 applications.
|
|
For example; `Number=1 StkMask=0b1111 Version=capi20' means:
|
|
allow CAPI 2.0 applications requesting ISDN controller 1 to
|
|
use the ISDN stacks with IsdnStkNumber 0 - 3 on the BRICK."
|
|
-- DEFVAL { 'FFFFFFFF'H }
|
|
DEFVAL { 4294967295 }
|
|
::= { capiMultiControllerEntry 2 }
|
|
|
|
capiControllerVersion OBJECT-TYPE
|
|
SYNTAX INTEGER { capi11(1), capi20(2), delete(3) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Specifies which CAPI applications (CAPI version 1.1, or 2.0)
|
|
this entry applies to.
|
|
|
|
Set this field to `delete' to delete this entry."
|
|
DEFVAL { capi11 }
|
|
::= { capiMultiControllerEntry 3 }
|
|
|
|
|
|
|
|
|
|
capiAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable CAPI"
|
|
DEFVAL { enable }
|
|
::= { capi 9 }
|
|
|
|
capiTcpNoDelay OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or Disable TCP Nagle Algorithm for CAPI.
|
|
disable: Normal operation with Nagle support.
|
|
enable : Disable Nagle TCP Algorithm.
|
|
Enable TcpNoDelay increases Network load and decrease
|
|
delay of TCP packages. On CAPI Applications with small
|
|
Data packages this option may increase transmission rate."
|
|
DEFVAL { disable }
|
|
::= { capi 10 }
|
|
|
|
capiFaxG3Header OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
logo-header(1),
|
|
no-logo(2),
|
|
no-header(3),
|
|
not-available(4),
|
|
specify(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Specifies whether the header-line and logo
|
|
('BIANCA/FAX'), should appear on outgoing facsimiles. The
|
|
value 'logo_header' allows the header-line and the logo
|
|
to be printed on the top of each page."
|
|
DEFVAL { specify }
|
|
::= { capi 11 }
|
|
|
|
capiX25DefWinSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..7)
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"Specifies the X.25 default Windowsize used in
|
|
ISO8208 (X.25 DTE <-> DTE) Filetransferprotocol.
|
|
Applications such as OFTP normally uses 7 but
|
|
some Applications did not use X.25 negotiation,
|
|
so the CAPI uses here a default from 2 and the
|
|
connection is closed by a X.25 Reset. Setting
|
|
this value to 7 is not standard but useful for
|
|
the customer to avoid this error."
|
|
DEFVAL { 2 }
|
|
::= { capi 12 }
|
|
|
|
|
|
END
|