WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/zhone/ZhoneVdsl-MIB

6562 lines
253 KiB
Plaintext
Raw Blame History

--
-- phyVdsl.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285
-- Thursday, October 10, 2013 at 07:01:35
--
ZhoneVdsl-MIB DEFINITIONS ::= BEGIN
IMPORTS
HCPerfTimeElapsed, HCPerfCurrentCount, HCPerfIntervalCount
FROM HC-PerfHist-TC-MIB
ifIndex
FROM IF-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
transmission, Integer32, Unsigned32, Gauge32, OBJECT-TYPE,
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus, TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
zhoneVdsl, zhoneModules
FROM Zhone;
-- Overview of Zhone VDSL mib
--
-- This MIB file is based on RFC3728.
--
-- The Zhone DSL mib provides configuration, status and performance parameters
-- used/provided by Zhone implementation of VDSL2 interfaces.
-- The following tables are described in this mib:
--
-- zhoneVdsLineConfProfileTable
-- This table provides VDSL specific configuration parameters. It contains the VDSL
-- profiles ( Config, CPE, and CO ). This table is indexed by ifIndex.
--
-- zhoneVdslCustomNotchTable
-- This table contains HAM (Handheld Amateur Radio) custom notch information.
-- This table supports more entries than the standard RFC.
--
--
--
--
--
--
--
--
--
--
-- 1.3.6.1.4.1.5504.6.110
zhoneVdslMib MODULE-IDENTITY
LAST-UPDATED "201302271600Z" -- February 27, 2013 at 16:00 GMT
ORGANIZATION
"ADSLMIB Working Group"
CONTACT-INFO
"WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed
Sand Channel Systems
Postal: P.O. Box 37324
Raleigh, NC 27627-7324
USA
Email: sneedmike@hotmail.com
Phone: +1 206 600 7022
Co-editor: Bob Ray
PESA Switching Systems, Inc.
Postal: 330-A Wynn Drive
Huntsville, AL 35805
USA
Email: rray@pesa.com
Phone: +1 256 726 9200 ext. 142
Co-editor: Rajesh Abbi
Alcatel USA
Postal: 2301 Sugar Bush Road
Raleigh, NC 27612-3339
USA
Email: Rajesh.Abbi@alcatel.com
Phone: +1 919 850 6194
"
DESCRIPTION
"The MIB module defining objects for the management of a pair
of VDSL transceivers at each end of the VDSL line. Each such
line has an entry in an ifTable which may include multiple
transceiver lines. An agent may reside at either end of the
VDSL line. However, the MIB is designed to require no
management communication between them beyond that inherent in
the low-level VDSL line protocol. The agent may monitor and
control this protocol for its needs.
VDSL lines may support optional Fast or Interleaved channels.
If these are supported, additional entries corresponding to the
supported channels must be created in the ifTable. Thus a VDSL
line that supports both channels will have three entries in the
ifTable, one for each physical, fast, and interleaved, whose
ifType values are equal to vdsl(97), fast(125), and
interleaved(124), respectively. The ifStackTable is used to
represent the relationship between the entries.
Naming Conventions:
Vtuc -- (VTUC) transceiver at near (Central) end of line
Vtur -- (VTUR) transceiver at Remote end of line
Vtu -- One of either Vtuc or Vtur
Curr -- Current
Prev -- Previous
Atn -- Attenuation
ES -- Errored Second.
SES -- Severely Errored Second
UAS -- Unavailable Second
LCS -- Line Code Specific
Lof -- Loss of Frame
Lol -- Loss of Link
Los -- Loss of Signal
Lpr -- Loss of Power
xxxs -- Sum of Seconds in which xxx has occured
(e.g., xxx = Lof, Los, Lpr, Lol)
Max -- Maximum
Mgn -- Margin
Min -- Minimum
Psd -- Power Spectral Density
Snr -- Signal to Noise Ratio
Tx -- Transmit
Blks -- Blocks
Copyright (C) The Internet Society (2004). This version
of this MIB module is part of RFC 3728: see the RFC
itself for full legal notices."
REVISION "201310080643Z" -- October 08, 2013 at 06:43 GMT
DESCRIPTION
"Add ATM or PTM transport mode retrieval support"
REVISION "201302271800Z" -- February 27, 2013 at 18:00 GMT
DESCRIPTION
"Adding support for G.INP / ITU-T G.998.4"
REVISION "201302111415Z" -- February 11, 2013 at 14:15 GMT
DESCRIPTION
"Add VDSL2 Vectoring statistics retrieval support."
REVISION "201112010559Z" -- December 01, 2011 at 05:59 GMT
DESCRIPTION
"V.01.24
- fix vpi/vci valid ranges"
REVISION "201111161214Z" -- November 16, 2011 at 12:14 GMT
DESCRIPTION
"V.01.24
- add default VPI/VCI for line when its in single-vc mode"
REVISION "201110181113Z" -- October 18, 2011 at 11:13 GMT
DESCRIPTION
"V.01.23
- add A3/A4/B3/B4 parameters for UPBO configuration"
REVISION "201110141124Z" -- October 14, 2011 at 11:24 GMT
DESCRIPTION
"V.01.22
- split psdShape for Hytec into two shapes for 17a and 30a"
REVISION "201104281155Z" -- April 28, 2011 at 11:55 GMT
DESCRIPTION
"V.01.21
- add new PSD Shape values and fix units
for SNR and Attn"
REVISION "201011050716Z" -- November 05, 2010 at 07:16 GMT
DESCRIPTION
"V.01.20
Modify defaults for max power and max SNR"
REVISION "201010130459Z" -- October 13, 2010 at 04:59 GMT
DESCRIPTION
"V.01.19
-added zhoneVdslPhysPhyRActive object
"
REVISION "201006071129Z" -- June 07, 2010 at 11:29 GMT
DESCRIPTION
"V.01.18
VDSL upstream minINP values expanded"
REVISION "201005310011Z" -- May 31, 2010 at 00:11 GMT
DESCRIPTION
"V.01.17
VDSL phyR Statistics Objects are added"
REVISION "201004020640Z" -- April 02, 2010 at 06:40 GMT
DESCRIPTION
"V.01.16
- modified defaults for zhoneVdslLineConfLineType
to fastOnly, zhoneVdslLineConfDownPhyRSupport and
zhoneVdslLineConfUpPhyRSupport to enable.
"
REVISION "201003290554Z" -- March 29, 2010 at 05:54 GMT
DESCRIPTION
"V.01.15
Expanded lower end of range on zhoneVdslLineConfDownMaxPwr, zhoneVdslLineConfUpMaxPwr"
REVISION "201003020844Z" -- March 02, 2010 at 08:44 GMT
DESCRIPTION
"V.01.14
Added zhoneVdslLineConfProfileEntry objects 113-123 to support BroadCOM VDSL."
REVISION "200804141228Z" -- April 14, 2008 at 12:28 GMT
DESCRIPTION
"V.01.13
- cleanup traps
- config SNR values changed from 0..127 to 0.310 in 1/10 DBm steps."
REVISION "200802050856Z" -- February 05, 2008 at 08:56 GMT
DESCRIPTION
"V.01.12
- add more values to zhoneVdslLineConfDownPsdMaskSelect
- add more values to zhoneVdslLineConfUpPsdMaskSelect"
REVISION "200710231653Z" -- October 23, 2007 at 16:53 GMT
DESCRIPTION
"V.01.11
- add more values to zhoneVdslLineConfDownPsdMaskSelect
- add more values to zhoneVdslLineConfUppsdMaskSelect"
REVISION "200710051324Z" -- October 05, 2007 at 13:24 GMT
DESCRIPTION
"V.01.10
- Add zhoneVdslPhysCurrConnType
- Add zhoneVdslPhysCurrProfile"
REVISION "200706201056Z" -- June 20, 2007 at 10:56 GMT
DESCRIPTION
"V.01.09 Accelity-2 additions
- Add 'dynamic' option to zhoneVdslLineConfDownRateMode
- Add 'dynamic' option to zhoneVdslLineConfUpRateMode
- Add zhoneVdslLineConfDownBitSwap
- Add zhoneVdslLineConfUpBitSwap
- Add zhoneVdslLineConfAdslAnnexMModeEnabled
- Add zhoneVdslLineConfAdslAnnexMPsdMask
- Add zhoneVdslLineConfUS0BoundaryTone
- Add zhoneVdslLineConfDownInp
- Add zhoneVdslLineConfUpInp
- Add zhoneVdslLineConfDownMaxInterleavingDelay
- Add zhoneVdslLineConfUpMaxInterleavingDelay
- Add zhoneVdslLineConfDownPsdMaskEnable
- Add zhoneVdslLineConfUpPsdMaskEnable
- Add zhoneVdslLineConfDownPsdMaskSelect
- Add zhoneVdslLineConfUpPsdMaskSelect"
REVISION "200703141608Z" -- March 14, 2007 at 16:08 GMT
DESCRIPTION
"V.01.08 - ADSL Fallback additions
- add ADSL transmission modes
- add ADSL objects to VDSL CO Profile
- add ADSL objecst to VDSL CPE Profile"
REVISION "200612051509Z" -- December 05, 2006 at 15:09 GMT
DESCRIPTION
"V.01.07
- modify zhoneVdslLineConfUpMaxAggregateTxPwr to conform
with Conexant driver
- modify zhoneVdslLineConfDownMaxAggregateTxPwr to conform
with Conexant driver
- mark up mib for vdslPerfDataTable
- mark up mib for vdslChanPerfDataTable
- In ZhoneVdslChanPerfDataTable, convert Counter64 objects to
Integer32 objects. "
REVISION "200611100858Z" -- November 10, 2006 at 08:58 GMT
DESCRIPTION
"V.01.06
- modify zhoneVdslLineConfDownPsdShape to conform
with Conexant driver values
- modify zhoneVdslLineConfUpPsdShape to conform
with Conexant driver values"
REVISION "200610101525Z" -- October 10, 2006 at 15:25 GMT
DESCRIPTION
"V.01.05
- zhoneVdslLineAlarmConfProfileEntry is now indexed by ifIndex
- add MIN/MAX values
- add zhoneVdslPhysStatus ZHONE KEYWORDS
- add zhoneVdslChanStatus ZHONE KEYWORDS
- make phyVdsl.mib reflect new default values
- vdslConfig: line-type
- vdslConfig: band-opt-uasge
- vdslCoConfig: pbo-control
- vdslCoConfig: trellis
- vdslCpeConfig: pbo-control
- vdslCpeConfig: psd-template
- vdslCpeConfig: trellis
- fix spelling zhoneVdslLineConfDownGhsA43cTonePwr
- cleanup min/max data rates and def values for them"
REVISION "200609101116Z" -- September 10, 2006 at 11:16 GMT
DESCRIPTION
"V.01.04
- rename zhoneVdslLineConfSeltNoiseMeasurementTme to
zhoneVdslLineConfSeltNoiseMeasurementTime"
REVISION "200608221721Z" -- August 22, 2006 at 17:21 GMT
DESCRIPTION
"V.01.03 - move tables from phyDsl.mib
- move zhoneVdslStatusTable from phyDsl.mib
- move zhoneVdslPerfTable from phyDsl.mib "
REVISION "200606151529Z" -- June 15, 2006 at 15:29 GMT
DESCRIPTION
"V01.02 - add ZHONE-KEYWORDS"
REVISION "200402190000Z" -- February 19, 2004 at 00:00 GMT
DESCRIPTION
"Initial version, published as RFC 3728."
::= { zhoneModules 110 }
--
-- Textual conventions
--
-- Textual conventions
--
-- textual conventions used in this MIB
--
ZhoneVdslLineCodingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used as the syntax for the VDSL Line
Code. Attributes with this syntax identify the line coding
used. Specified as an INTEGER, the three values are:
other(1) -- none of the following
mcm(2) -- Multiple Carrier Modulation
scm(3) -- Single Carrier Modulation"
SYNTAX INTEGER
{
other(1),
mcm(2),
scm(3)
}
ZhoneVdslLineEntity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Identifies a transceiver as being either Vtuc or Vtur.
A VDSL line consists of two transceivers, a Vtuc and a
Vtur. Attributes with this syntax reference the two sides
of a line. Specified as an INTEGER, the two values are:
vtuc(1) -- central site transceiver
vtur(2) -- remote site transceiver"
SYNTAX INTEGER
{
vtuc(1),
vtur(2)
}
--
-- Node definitions
--
-- Node definitions
--
-- 1.3.6.1.4.1.5504.5.13.1
-- 1.3.6.1.4.1.5504.5.13.1
zhoneVdslLineMib OBJECT IDENTIFIER ::= { zhoneVdsl 1 }
-- Notification definitions
-- 1.3.6.1.4.1.5504.5.13.1.0
-- 1.3.6.1.4.1.5504.5.13.1.0
zhoneVdslNotifications OBJECT IDENTIFIER ::= { zhoneVdslLineMib 0 }
-- 1.3.6.1.4.1.5504.5.13.1.0.1
vdslXtucPerf15MinLofsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr15MinLofs }
STATUS current
DESCRIPTION
"Loss of Framing 15-minute interval threshold
(vdslLineAlarmConfThresh15MinLofs) reached."
::= { zhoneVdslNotifications 1 }
-- 1.3.6.1.4.1.5504.5.13.1.0.2
vdslXtucPerf15MinLossThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr15MinLoss }
STATUS current
DESCRIPTION
"Loss of Signal 15-minute interval threshold
(vdslLineAlarmConfThresh15MinLoss) reached."
::= { zhoneVdslNotifications 2 }
-- 1.3.6.1.4.1.5504.5.13.1.0.3
vdslXtucPerf15MinLprsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr15MinLprs }
STATUS current
DESCRIPTION
"Loss of Power 15-minute interval threshold
(vdslLineAlarmConfThresh15MinLprs) reached."
::= { zhoneVdslNotifications 3 }
-- 1.3.6.1.4.1.5504.5.13.1.0.4
vdslXtucPerf15MinLolsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr15MinLols }
STATUS current
DESCRIPTION
"Loss of Link 15-minute interval threshold
(vdslLineAlarmConfThresh15MinLols) reached."
::= { zhoneVdslNotifications 4 }
-- 1.3.6.1.4.1.5504.5.13.1.0.5
vdslXtucPerf15MinESsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr15MinESs }
STATUS current
DESCRIPTION
"Errored Seconds 15-minute interval threshold
(vdslLineAlarmConfThresh15MinESs) reached."
::= { zhoneVdslNotifications 5 }
-- 1.3.6.1.4.1.5504.5.13.1.0.6
vdslXtucPerf15MinSESsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr15MinSESs }
STATUS current
DESCRIPTION
"Severely Errored Seconds 15-minute interval threshold
(vdslLineAlarmConfThresh15MinSESs) reached."
::= { zhoneVdslNotifications 6 }
-- 1.3.6.1.4.1.5504.5.13.1.0.7
vdslXtucPerf15MinUASsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr15MinUASs }
STATUS current
DESCRIPTION
"Unavailable Seconds 15-minute interval threshold
(vdslLineAlarmConfThresh15MinUASs) reached."
::= { zhoneVdslNotifications 7 }
-- 1.3.6.1.4.1.5504.5.13.1.0.8
vdslXtucPerf1DayLofsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr1DayLofs }
STATUS current
DESCRIPTION
"Loss of Framing 1-day interval threshold
(vdslLineAlarmConfThresh1DayLofs) reached."
::= { zhoneVdslNotifications 8 }
-- 1.3.6.1.4.1.5504.5.13.1.0.9
vdslXtucPerf1DayLossThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr1DayLoss }
STATUS current
DESCRIPTION
"Loss of Signal 1-day interval threshold
(vdslLineAlarmConfThresh1DayLoss) reached."
::= { zhoneVdslNotifications 9 }
-- 1.3.6.1.4.1.5504.5.13.1.0.10
vdslXtucPerf1DayLprsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr1DayLprs }
STATUS current
DESCRIPTION
"Loss of Power 1-day interval threshold
(vdslLineAlarmConfThresh1DayLprs) reached."
::= { zhoneVdslNotifications 10 }
-- 1.3.6.1.4.1.5504.5.13.1.0.11
vdslXtucPerf1DayLolsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr1DayLols }
STATUS current
DESCRIPTION
"Loss of Link 1-day interval threshold
(vdslLineAlarmConfThresh1DayLols) reached."
::= { zhoneVdslNotifications 11 }
-- 1.3.6.1.4.1.5504.5.13.1.0.12
vdslXtucPerf1DayESsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr1DayESs }
STATUS current
DESCRIPTION
"Errored Seconds 1-day interval threshold
(vdslLineAlarmConfThresh1DayESs) reached."
::= { zhoneVdslNotifications 12 }
-- 1.3.6.1.4.1.5504.5.13.1.0.13
vdslXtucPerf1DaySESsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr1DaySESs }
STATUS current
DESCRIPTION
"Severely Errored Seconds 1-day interval threshold
(vdslLineAlarmConfThresh1DaySESs) reached."
::= { zhoneVdslNotifications 13 }
-- 1.3.6.1.4.1.5504.5.13.1.0.14
vdslXtucPerf1DayUASsThreshTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataCurr1DayUASs }
STATUS current
DESCRIPTION
"Unavailable Seconds 1-day interval threshold
(vdslLineAlarmConfThresh1DayUASs) reached."
::= { zhoneVdslNotifications 14 }
-- 1.3.6.1.4.1.5504.5.13.1.0.12
-- 1.3.6.1.4.1.5504.5.13.1.0.15
zhoneVdslInitFailureTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslPerfDataInits }
STATUS current
DESCRIPTION
"Vtu initialization failed. "
::= { zhoneVdslNotifications 15 }
-- 1.3.6.1.4.1.5504.5.13.1.0.16
vdslXtucMinTxThresholdAlarmFailureTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslChanCurrTxRate, zhoneVdslLineConfDownMinTxThresholdAlarm }
STATUS current
DESCRIPTION
"This trap is thrown when the XTUC line rate syncs below the
threshold rate as defined by zhoneVdslLineConfDownMinTxThresholdAlarm."
::= { zhoneVdslNotifications 16 }
-- 1.3.6.1.4.1.5504.5.13.1.0.17
vdslXturMinTxThresholdAlarmFailureTrap NOTIFICATION-TYPE
OBJECTS { zhoneVdslChanCurrTxRate, zhoneVdslLineConfUpMinTxThresholdAlarm }
STATUS current
DESCRIPTION
"This trap is thrown when the XTUR line rate syncs below the
threshold rate as defined by zhoneVdslLineConfUpMinTxThresholdAlarm."
::= { zhoneVdslNotifications 17 }
-- 1.3.6.1.4.1.5504.5.13.1.1
-- 1.3.6.1.4.1.5504.5.13.1.1
zhoneVdslMibObjects OBJECT IDENTIFIER ::= { zhoneVdslLineMib 1 }
-- objects
--
-- 1.3.6.1.4.1.5504.5.13.1.1.1
-- 1.3.6.1.4.1.5504.5.13.1.1.1
zhoneVdslLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes common attributes describing
both ends of the line. It is required for all VDSL
physical interfaces. VDSL physical interfaces are
those ifEntries where ifType is equal to vdsl(97)."
::= { zhoneVdslMibObjects 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.1.1
-- 1.3.6.1.4.1.5504.5.13.1.1.1.1
zhoneVdslLineEntry OBJECT-TYPE
SYNTAX ZhoneVdslLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vdslLineTable."
INDEX { ifIndex }
::= { zhoneVdslLineTable 1 }
ZhoneVdslLineEntry ::=
SEQUENCE {
zhoneVdslLineCoding
ZhoneVdslLineCodingType,
zhoneVdslLineType
INTEGER,
zhoneVdslLineConfProfile
SnmpAdminString,
zhoneVdslLineAlarmConfProfile
SnmpAdminString
}
-- 1.3.6.1.4.1.5504.5.13.1.1.1.1.1
-- 1.3.6.1.4.1.5504.5.13.1.1.1.1.1
zhoneVdslLineCoding OBJECT-TYPE
SYNTAX ZhoneVdslLineCodingType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the VDSL coding type used on this line."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslLineEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.1.1.2
-- 1.3.6.1.4.1.5504.5.13.1.1.1.1.2
zhoneVdslLineType OBJECT-TYPE
SYNTAX INTEGER
{
noChannel(1),
fastOnly(2),
interleavedOnly(3),
fastOrInterleaved(4),
fastAndInterleaved(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines the type of VDSL physical line entity that exists,
by defining whether and how the line is channelized. If
the line is channelized, the value will be other than
noChannel(1). This object defines which channel type(s)
are supported. Defined values are:
noChannel(1) -- no channels exist
fastOnly(2) -- only fast channel exists
interleavedOnly(3) -- only interleaved channel exists
fastOrInterleaved(4) -- either fast or interleaved channel
-- exist, but only one at a time
fastAndInterleaved(5) -- both fast and interleaved channels
-- exist
Note that 'slow' and 'interleaved' refer to the same
channel. In the case that the line is channelized, the
manager can use the ifStackTable to determine the ifIndex
for the associated channel(s)."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslLineEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.1.1.3
-- 1.3.6.1.4.1.5504.5.13.1.1.1.1.3
zhoneVdslLineConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the VDSL
Line Configuration Profile Table, zhoneVdslLineConfProfileTable,
which applies for this VDSL line, and channels if
applicable.
This object MUST be maintained in a persistent manner."
DEFVAL { "DEFVAL" }
::= { zhoneVdslLineEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.1.1.4
-- 1.3.6.1.4.1.5504.5.13.1.1.1.1.4
zhoneVdslLineAlarmConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the VDSL
Line Alarm Configuration Profile Table,
zhoneVdslLineAlarmConfProfileTable, which applies to this
VDSL line, and channels if applicable.
This object MUST be maintained in a persistent manner."
DEFVAL { "DEFVAL" }
::= { zhoneVdslLineEntry 4 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2
-- 1.3.6.1.4.1.5504.5.13.1.1.2
zhoneVdslPhysTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides one row for each Vtu. Each row
contains the Physical Layer Parameters table for that
Vtu. VDSL physical interfaces are those ifEntries where
ifType is equal to vdsl(97)."
::= { zhoneVdslMibObjects 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1
zhoneVdslPhysEntry OBJECT-TYPE
SYNTAX ZhoneVdslPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vdslPhysTable."
INDEX { ifIndex, zhoneVdslPhysSide }
::= { zhoneVdslPhysTable 1 }
ZhoneVdslPhysEntry ::=
SEQUENCE {
zhoneVdslPhysSide
ZhoneVdslLineEntity,
zhoneVdslPhysInvSerialNumber
OCTET STRING,
zhoneVdslPhysInvVendorID
OCTET STRING,
zhoneVdslPhysInvVersionNumber
OCTET STRING,
zhoneVdslPhysCurrSnrMgn
Integer32,
zhoneVdslPhysCurrAtn
Gauge32,
zhoneVdslPhysCurrStatus
BITS,
zhoneVdslPhysCurrOutputPwr
Integer32,
zhoneVdslPhysCurrAttainableRate
Gauge32,
zhoneVdslPhysCurrLineRate
Gauge32,
zhoneVdslPhysCurrConnType
INTEGER,
zhoneVdslPhysCurrProfile
INTEGER,
zhoneVdslPhysPhyRActive
TruthValue,
zhoneVdslPhysGinpActive
TruthValue,
zhoneVdslPhysTransportMode
INTEGER
}
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.1
zhoneVdslPhysSide OBJECT-TYPE
SYNTAX ZhoneVdslLineEntity
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies whether the transceiver is the Vtuc or Vtur."
::= { zhoneVdslPhysEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.2
zhoneVdslPhysInvSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor specific string that identifies the
vendor equipment."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPhysEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.3
zhoneVdslPhysInvVendorID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor ID code is a copy of the binary vendor
identification field expressed as readable characters
in hexadecimal notation."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPhysEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.4
zhoneVdslPhysInvVersionNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor specific version number sent by this Vtu
as part of the initialization messages. It is a copy
of the binary version number field expressed as
readable characters in hexadecimal notation."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPhysEntry 4 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.5
zhoneVdslPhysCurrSnrMgn OBJECT-TYPE
SYNTAX Integer32 (-127..127)
UNITS "0.10dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Noise Margin as seen by this Vtu with respect to its
received signal in 0.10dB. The effective range is
-31.75 to +31.75 dB."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPhysEntry 5 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.6
zhoneVdslPhysCurrAtn OBJECT-TYPE
SYNTAX Gauge32 (0..255)
UNITS "0.10dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured difference in the total power transmitted by
the peer Vtu and the total power received by this Vtu.
The effective range is 0 to +63.75 dB."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPhysEntry 6 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.7
zhoneVdslPhysCurrStatus OBJECT-TYPE
SYNTAX BITS
{
noDefect(0),
lossOfFraming(1),
lossOfSignal(2),
lossOfPower(3),
lossOfSignalQuality(4),
lossOfLink(5),
dataInitFailure(6),
configInitFailure(7),
protocolInitFailure(8),
noPeerVtuPresent(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current state of the Vtu line. This is a
bit-map of possible conditions. The various bit
positions are:
0 noDefect There are no defects on the line.
1 lossOfFraming Vtu failure due to not receiving
a valid frame.
2 lossOfSignal Vtu failure due to not receiving
signal.
3 lossOfPower Vtu failure due to loss of power.
4 lossOfSignalQuality Loss of Signal Quality is declared
when the Noise Margin falls below
the Minimum Noise Margin, or the
bit-error-rate exceeds 10^-7.
5 lossOfLink Vtu failure due to inability to
link with peer Vtu. Set whenever
the transceiver is in the 'Warm
Start' state.
6 dataInitFailure Vtu failure during initialization
due to bit errors corrupting
startup exchange data.
7 configInitFailure Vtu failure during initialization
due to peer Vtu not able to
support requested configuration.
8 protocolInitFailure Vtu failure during initialization
due to incompatible protocol used
by the peer Vtu.
9 noPeerVtuPresent Vtu failure during initialization
due to no activation sequence
detected from peer Vtu.
This is intended to supplement ifOperStatus."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPhysEntry 7 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.8
zhoneVdslPhysCurrOutputPwr OBJECT-TYPE
SYNTAX Integer32 (0..160)
UNITS "0.1dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured total output power transmitted by this VTU.
This is the measurement that was reported during
the last activation sequence."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPhysEntry 8 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.9
zhoneVdslPhysCurrAttainableRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum currently attainable data rate
in steps of 1000 bits/second by the Vtu. This value
will be equal to or greater than vdslPhysCurrLineRate.
Note that for SCM, the minimum and maximum data rates
are equal. Note: 1 kbps = 1000 bps."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPhysEntry 9 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.10
zhoneVdslPhysCurrLineRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current data rate in steps of 1000
bits/second by the Vtu. This value will be less than
or equal to vdslPhysCurrAttainableRate. Note: 1 kbps =
1000 bps."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPhysEntry 10 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.12
zhoneVdslPhysCurrConnType OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
not-connected(2),
invalid(3),
adsl(4),
adsl2(5),
adsl2-annexm(6),
adsl2plus(7),
adsl2plus-annexm(8),
vdsl1(9),
vdsl2(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current connection type.
unknown(1) - could not determine connection type
not-connected(2) - connection has not been established
invalid(3) - unknown connection established
adsl(4) - G.992.1/2
adsl2(5) - G.992.3/4
adsl2-annexm(6) - G.992.3/4 with Annex M
adsl2plus(7) - G.992.5
adsl2plus-annexm(8) - G.992.5 with Annex M
vdsl1(9) - G.993.1
vdsl2(10) - G.993.2
"
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPhysEntry 12 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.13
zhoneVdslPhysCurrProfile OBJECT-TYPE
SYNTAX INTEGER
{
g993-2-8a(1),
g993-2-8b(2),
g993-2-8c(3),
g993-2-8d(4),
g993-2-12a(5),
g993-2-12b(6),
g993-2-17a(7),
g993-2-30a(8),
no-vdsl-connection(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current VDSL profile being used in the
connection. This object is only valid for VDSL
connections."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPhysEntry 13 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.14
zhoneVdslPhysPhyRActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Phy Retransmit Rx Queue Active."
::= { zhoneVdslPhysEntry 14 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.15
zhoneVdslPhysGinpActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.INP/ITU-G.998.4 feature active"
REFERENCE
"ITU-G.998.4"
::= { zhoneVdslPhysEntry 15 }
-- 1.3.6.1.4.1.5504.5.13.1.1.2.1.16
zhoneVdslPhysTransportMode OBJECT-TYPE
SYNTAX INTEGER
{
atm(1),
ptm(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transport mode, either ATM or PTM"
::= { zhoneVdslPhysEntry 16 }
-- 1.3.6.1.4.1.5504.5.13.1.1.3
-- 1.3.6.1.4.1.5504.5.13.1.1.3
zhoneVdslChanTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides one row for each Vtu channel.
VDSL channel interfaces are those ifEntries where
ifType is equal to interleave(124) or fast(125)."
::= { zhoneVdslMibObjects 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.3.1
-- 1.3.6.1.4.1.5504.5.13.1.1.3.1
zhoneVdslChanEntry OBJECT-TYPE
SYNTAX ZhoneVdslChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vdslChanTable."
INDEX { ifIndex, zhoneVdslPhysSide }
::= { zhoneVdslChanTable 1 }
ZhoneVdslChanEntry ::=
SEQUENCE {
zhoneVdslChanInterleaveDelay
Gauge32,
zhoneVdslChanCrcBlockLength
Gauge32,
zhoneVdslChanCurrTxRate
Gauge32,
zhoneVdslChanCurrTxSlowBurstProtect
Gauge32,
zhoneVdslChanCurrTxFastFec
Gauge32
}
-- 1.3.6.1.4.1.5504.5.13.1.1.3.1.1
zhoneVdslChanInterleaveDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interleave Delay for this channel.
Interleave delay applies only to the interleave
(slow) channel and defines the mapping (relative
spacing) between subsequent input bytes at the
interleaver input and their placement in the bit
stream at the interleaver output. Larger numbers
provide greater separation between consecutive
input bytes in the output bit stream allowing for
improved impulse noise immunity at the expense of
payload latency.
In the case where the ifType is fast(125), return
a value of zero."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChanEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.3.1.2
zhoneVdslChanCrcBlockLength OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the length of the channel data-block
on which the CRC operates."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChanEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.3.1.3
zhoneVdslChanCurrTxRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual transmit data rate on this channel. Note: 1
kbps = 1000 bps."
::= { zhoneVdslChanEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.3.1.4
zhoneVdslChanCurrTxSlowBurstProtect OBJECT-TYPE
SYNTAX Gauge32 (0..1275)
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual level of impulse noise (burst) protection
for an interleaved (slow) channel. This parameter is
not applicable to fast channels. For fast channels,
a value of zero shall be returned."
REFERENCE
"ITU-T G.997.1, section 7.3.2.3"
::= { zhoneVdslChanEntry 4 }
-- 1.3.6.1.4.1.5504.5.13.1.1.3.1.5
zhoneVdslChanCurrTxFastFec OBJECT-TYPE
SYNTAX Gauge32 (0..50)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Forward Error Correction (FEC) redundancy
related overhead for a fast channel. This parameter
is not applicable to an interleaved (slow) channel.
For interleaved channels, a value of zero shall be
returned."
::= { zhoneVdslChanEntry 5 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4
-- 1.3.6.1.4.1.5504.5.13.1.1.4
zhoneVdslPerfDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides one row for each VDSL physical
interface. VDSL physical interfaces are those ifEntries
where ifType is equal to vdsl(97)."
::= { zhoneVdslMibObjects 4 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1
zhoneVdslPerfDataEntry OBJECT-TYPE
SYNTAX ZhoneVdslPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vdslPerfDataTable."
INDEX { ifIndex, zhoneVdslPhysSide }
::= { zhoneVdslPerfDataTable 1 }
ZhoneVdslPerfDataEntry ::=
SEQUENCE {
zhoneVdslPerfDataValidIntervals
Integer32,
zhoneVdslPerfDataInvalidIntervals
Integer32,
zhoneVdslPerfDataLofs
Unsigned32,
zhoneVdslPerfDataLoss
Unsigned32,
zhoneVdslPerfDataLprs
Unsigned32,
zhoneVdslPerfDataLols
Unsigned32,
zhoneVdslPerfDataESs
Unsigned32,
zhoneVdslPerfDataSESs
Unsigned32,
zhoneVdslPerfDataUASs
Unsigned32,
zhoneVdslPerfDataInits
Unsigned32,
zhoneVdslPerfDataCurr15MinTimeElapsed
Integer32,
zhoneVdslPerfDataCurr15MinLofs
Unsigned32,
zhoneVdslPerfDataCurr15MinLoss
Unsigned32,
zhoneVdslPerfDataCurr15MinLprs
Unsigned32,
zhoneVdslPerfDataCurr15MinLols
Unsigned32,
zhoneVdslPerfDataCurr15MinESs
Unsigned32,
zhoneVdslPerfDataCurr15MinSESs
Unsigned32,
zhoneVdslPerfDataCurr15MinUASs
Unsigned32,
zhoneVdslPerfDataCurr15MinInits
Unsigned32,
zhoneVdslPerfData1DayValidIntervals
Integer32,
zhoneVdslPerfData1DayInvalidIntervals
Integer32,
zhoneVdslPerfDataCurr1DayTimeElapsed
Integer32,
zhoneVdslPerfDataCurr1DayLofs
Unsigned32,
zhoneVdslPerfDataCurr1DayLoss
Unsigned32,
zhoneVdslPerfDataCurr1DayLprs
Unsigned32,
zhoneVdslPerfDataCurr1DayLols
Unsigned32,
zhoneVdslPerfDataCurr1DayESs
Unsigned32,
zhoneVdslPerfDataCurr1DaySESs
Unsigned32,
zhoneVdslPerfDataCurr1DayUASs
Unsigned32,
zhoneVdslPerfDataCurr1DayInits
Unsigned32,
zhoneVdslPhyrRetransmittedCodewords
Unsigned32,
zhoneVdslPhyrCorrectedRetransmittedCodewords
Unsigned32,
zhoneVdslPhyrUncorrectableRetransmittedCodewords
Unsigned32,
zhoneVdslPhyrCurr15MinRetransmittedCodewords
Unsigned32,
zhoneVdslPhyrCurr15MinCorrectedRetransmittedCodewords
Unsigned32,
zhoneVdslPhyrCurr15MinUncorrectableRetransmittedCodewords
Unsigned32,
zhoneVdslPhyrCurr1DayRetransmittedCodewords
Unsigned32,
zhoneVdslPhyrCurr1DayCorrectedRetransmittedCodewords
Unsigned32,
zhoneVdslPhyrCurr1DayUncorrectableRetransmittedCodewords
Unsigned32,
zhoneVdslPhyrPrev1DayRetransmittedCodewords
Unsigned32,
zhoneVdslPhyrPrev1DayCorrectedRetransmittedCodewords
Unsigned32,
zhoneVdslPhyrPrev1DayUncorrectableRetransmittedCodewords
Unsigned32,
zhoneVdslGinpLeftrSecs
Unsigned32,
zhoneVdslGinpErrorFreeBits
Unsigned32,
zhoneVdslGinpMinEftr
Unsigned32,
zhoneVdslGinpCurr15MinLeftrSecs
Unsigned32,
zhoneVdslGinpCurr15MinErrorFreeBits
Unsigned32,
zhoneVdslGinpCurr15MinMinEftr
Unsigned32,
zhoneVdslGinpCurr1DayLeftrSecs
Unsigned32,
zhoneVdslGinpCurr1DayErrorFreeBits
Unsigned32,
zhoneVdslGinpCurr1DayMinEftr
Unsigned32,
zhoneVdslGinpPrev1DayLeftrSecs
Integer32,
zhoneVdslGinpPrev1DayErrorFreeBits
Integer32,
zhoneVdslGinpPrev1DayMinEftr
Integer32
}
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.1
zhoneVdslPerfDataValidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
UNITS "intervals"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Intervals per definition found in
HC-PerfHist-TC-MIB."
::= { zhoneVdslPerfDataEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.2
zhoneVdslPerfDataInvalidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
UNITS "intervals"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Invalid Intervals per definition found in
HC-PerfHist-TC-MIB."
::= { zhoneVdslPerfDataEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.3
zhoneVdslPerfDataLofs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds since the unit was last reset that there
was Loss of Framing."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfDataEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.4
zhoneVdslPerfDataLoss OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds since the unit was last reset that there
was Loss of Signal."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfDataEntry 4 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.5
zhoneVdslPerfDataLprs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds since the unit was last reset that there
was Loss of Power."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfDataEntry 5 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.6
zhoneVdslPerfDataLols OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds since the unit was last reset that there
was Loss of Link."
::= { zhoneVdslPerfDataEntry 6 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.7
zhoneVdslPerfDataESs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Errored Seconds since the unit was last reset.
An Errored Second is a one-second interval containing one
or more CRC anomalies, or one or more LOS or LOF defects."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfDataEntry 7 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.8
zhoneVdslPerfDataSESs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Severely Errored Seconds since the unit was last
reset."
::= { zhoneVdslPerfDataEntry 8 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.9
zhoneVdslPerfDataUASs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Unavailable Seconds since the unit was last
reset."
::= { zhoneVdslPerfDataEntry 9 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.10
zhoneVdslPerfDataInits OBJECT-TYPE
SYNTAX Unsigned32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the line initialization attempts since the unit
was last reset. This count includes both successful and
failed attempts."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfDataEntry 10 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.11
zhoneVdslPerfDataCurr15MinTimeElapsed OBJECT-TYPE
SYNTAX Integer32 (0..86399)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total elapsed seconds in this interval."
::= { zhoneVdslPerfDataEntry 11 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.12
zhoneVdslPerfDataCurr15MinLofs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there
was Loss of Framing."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfDataEntry 12 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.13
zhoneVdslPerfDataCurr15MinLoss OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there
was Loss of Signal."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfDataEntry 13 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.14
zhoneVdslPerfDataCurr15MinLprs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there
was Loss of Power."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfDataEntry 14 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.15
zhoneVdslPerfDataCurr15MinLols OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there
was Loss of Link."
::= { zhoneVdslPerfDataEntry 15 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.16
zhoneVdslPerfDataCurr15MinESs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Errored Seconds during this interval. An Errored
Second is a one-second interval containing one or more CRC
anomalies, or one or more LOS or LOF defects."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfDataEntry 16 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.17
zhoneVdslPerfDataCurr15MinSESs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Severely Errored Seconds during this interval."
::= { zhoneVdslPerfDataEntry 17 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.18
zhoneVdslPerfDataCurr15MinUASs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Unavailable Seconds during this interval."
::= { zhoneVdslPerfDataEntry 18 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.19
zhoneVdslPerfDataCurr15MinInits OBJECT-TYPE
SYNTAX Unsigned32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the line initialization attempts during this
interval. This count includes both successful and
failed attempts."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfDataEntry 19 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.20
zhoneVdslPerfData1DayValidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
UNITS "intervals"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Intervals per definition found in
HC-PerfHist-TC-MIB."
::= { zhoneVdslPerfDataEntry 20 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.21
zhoneVdslPerfData1DayInvalidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
UNITS "intervals"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Invalid Intervals per definition found in
HC-PerfHist-TC-MIB."
::= { zhoneVdslPerfDataEntry 21 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.22
zhoneVdslPerfDataCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX Integer32 (0..86399)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of seconds that have elapsed since the beginning
of the current 1-day interval."
::= { zhoneVdslPerfDataEntry 22 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.23
zhoneVdslPerfDataCurr1DayLofs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Framing (LOF) Seconds since the
beginning of the current 1-day interval."
::= { zhoneVdslPerfDataEntry 23 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.24
zhoneVdslPerfDataCurr1DayLoss OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Signal (LOS) Seconds since the beginning
of the current 1-day interval."
::= { zhoneVdslPerfDataEntry 24 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.25
zhoneVdslPerfDataCurr1DayLprs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Power (LPR) Seconds since the beginning
of the current 1-day interval."
::= { zhoneVdslPerfDataEntry 25 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.26
zhoneVdslPerfDataCurr1DayLols OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Link (LOL) Seconds since the beginning
of the current 1-day interval."
::= { zhoneVdslPerfDataEntry 26 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.27
zhoneVdslPerfDataCurr1DayESs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Errored Seconds (ES) since the beginning
of the current 1-day interval."
::= { zhoneVdslPerfDataEntry 27 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.28
zhoneVdslPerfDataCurr1DaySESs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Severely Errored Seconds (SES) since the
beginning of the current 1-day interval."
::= { zhoneVdslPerfDataEntry 28 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.29
zhoneVdslPerfDataCurr1DayUASs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Unavailable Seconds (UAS) since the beginning
of the current 1-day interval."
::= { zhoneVdslPerfDataEntry 29 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.30
zhoneVdslPerfDataCurr1DayInits OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the line initialization attempts since the
beginning of the current 1-day interval. This count
includes both successful and failed attempts."
::= { zhoneVdslPerfDataEntry 30 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.31
zhoneVdslPhyrRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmitted Codewords"
::= { zhoneVdslPerfDataEntry 31 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.32
zhoneVdslPhyrCorrectedRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmitted corrected Codewords"
::= { zhoneVdslPerfDataEntry 32 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.33
zhoneVdslPhyrUncorrectableRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmitted uncorrectable Codewords"
::= { zhoneVdslPerfDataEntry 33 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.34
zhoneVdslPhyrCurr15MinRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15 minutes Retransmitted Codewords"
::= { zhoneVdslPerfDataEntry 34 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.35
zhoneVdslPhyrCurr15MinCorrectedRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15 minutes Retransmitted Corrected Codewords"
::= { zhoneVdslPerfDataEntry 35 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.36
zhoneVdslPhyrCurr15MinUncorrectableRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15 minutes Retransmitted Uncorrectable Codewords"
::= { zhoneVdslPerfDataEntry 36 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.37
zhoneVdslPhyrCurr1DayRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Day Retransmitted Codewords"
::= { zhoneVdslPerfDataEntry 37 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.38
zhoneVdslPhyrCurr1DayCorrectedRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Day Retransmitted Corrected Codewords"
::= { zhoneVdslPerfDataEntry 38 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.39
zhoneVdslPhyrCurr1DayUncorrectableRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Day Retransmitted Uncorrectable Codewords"
::= { zhoneVdslPerfDataEntry 39 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.40
zhoneVdslPhyrPrev1DayRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous Day Retransmitted Codewords"
::= { zhoneVdslPerfDataEntry 40 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.41
zhoneVdslPhyrPrev1DayCorrectedRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous Day Retransmitted Corrected Codewords"
::= { zhoneVdslPerfDataEntry 41 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.42
zhoneVdslPhyrPrev1DayUncorrectableRetransmittedCodewords OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous Day Retransmitted Uncorrectable Codewords"
::= { zhoneVdslPerfDataEntry 42 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.43
zhoneVdslGinpLeftrSecs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LEFTRS - This counter counts the number of seconds that experienced a Low
Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error
Free Throughput dropped below the configured threshold."
::= { zhoneVdslPerfDataEntry 43 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.44
zhoneVdslGinpErrorFreeBits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"errorFreeBits - This counter counts the number of bits that crossed the
alpha1/beta1 interface (bits available to carry user payload). "
::= { zhoneVdslPerfDataEntry 44 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.45
zhoneVdslGinpMinEftr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"minEFTR - This performance monitoring parameter records the lowest value
of Error Free Throughput during the current interval."
::= { zhoneVdslPerfDataEntry 45 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.46
zhoneVdslGinpCurr15MinLeftrSecs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LEFTRS - This counter counts the number of seconds that experienced a Low
Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error
Free Throughput dropped below the configured threshold. This is the count
for the current 15 minutes."
::= { zhoneVdslPerfDataEntry 46 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.47
zhoneVdslGinpCurr15MinErrorFreeBits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"errorFreeBits - This counter counts the number of bits that crossed the
alpha1/beta1 interface (bits available to carry user payload). This is
the count for the current 15 minutes."
::= { zhoneVdslPerfDataEntry 47 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.48
zhoneVdslGinpCurr15MinMinEftr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"minEFTR - This performance monitoring parameter records the lowest value
of Error Free Throughput during the current interval. This is the count
for the current 15 minutes."
::= { zhoneVdslPerfDataEntry 48 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.49
zhoneVdslGinpCurr1DayLeftrSecs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LEFTRS - This counter counts the number of seconds that experienced a Low
Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error
Free Throughput dropped below the configured threshold. This is the count
for the current day."
::= { zhoneVdslPerfDataEntry 49 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.50
zhoneVdslGinpCurr1DayErrorFreeBits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"errorFreeBits - This counter counts the number of bits that crossed the
alpha1/beta1 interface (bits available to carry user payload). This is
the count for the current day."
::= { zhoneVdslPerfDataEntry 50 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.51
zhoneVdslGinpCurr1DayMinEftr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"minEFTR - This performance monitoring parameter records the lowest value
of Error Free Throughput during the current interval. This is the count
for the current day."
::= { zhoneVdslPerfDataEntry 51 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.52
zhoneVdslGinpPrev1DayLeftrSecs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LEFTRS - This counter counts the number of seconds that experienced a Low
Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error
Free Throughput dropped below the configured threshold. This is the count
for the previous day."
::= { zhoneVdslPerfDataEntry 52 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.53
zhoneVdslGinpPrev1DayErrorFreeBits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"errorFreeBits - This counter counts the number of bits that crossed the
alpha1/beta1 interface (bits available to carry user payload). This is
the count for the previous day."
::= { zhoneVdslPerfDataEntry 53 }
-- 1.3.6.1.4.1.5504.5.13.1.1.4.1.54
zhoneVdslGinpPrev1DayMinEftr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"minEFTR - This performance monitoring parameter records the lowest value
of Error Free Throughput during the current interval. This is the count
for the previous day."
::= { zhoneVdslPerfDataEntry 54 }
-- 1.3.6.1.4.1.5504.5.13.1.1.5
-- 1.3.6.1.4.1.5504.5.13.1.1.5
zhoneVdslPerfIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslPerfIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides one row for each Vtu performance
data collection interval. VDSL physical interfaces are
those ifEntries where ifType is equal to vdsl(97)."
::= { zhoneVdslMibObjects 5 }
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1
zhoneVdslPerfIntervalEntry OBJECT-TYPE
SYNTAX ZhoneVdslPerfIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vdslPerfIntervalTable."
INDEX { ifIndex, zhoneVdslPhysSide, zhoneVdslPerfIntervalNumber }
::= { zhoneVdslPerfIntervalTable 1 }
ZhoneVdslPerfIntervalEntry ::=
SEQUENCE {
zhoneVdslPerfIntervalNumber
Unsigned32,
zhoneVdslPerfIntervalLofs
HCPerfIntervalCount,
zhoneVdslPerfIntervalLoss
HCPerfIntervalCount,
zhoneVdslPerfIntervalLprs
HCPerfIntervalCount,
zhoneVdslPerfIntervalLols
HCPerfIntervalCount,
zhoneVdslPerfIntervalESs
HCPerfIntervalCount,
zhoneVdslPerfIntervalSESs
HCPerfIntervalCount,
zhoneVdslPerfIntervalUASs
HCPerfIntervalCount,
zhoneVdslPerfIntervalInits
HCPerfIntervalCount
}
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.1
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.1
zhoneVdslPerfIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Data Interval number 1 is the most recent
previous interval; interval 96 is 24 hours ago.
Intervals 2 to 96 are optional."
::= { zhoneVdslPerfIntervalEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.2
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.2
zhoneVdslPerfIntervalLofs OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds in the interval when there was Loss
of Framing."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfIntervalEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.3
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.3
zhoneVdslPerfIntervalLoss OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds in the interval when there was Loss
of Signal."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfIntervalEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.4
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.4
zhoneVdslPerfIntervalLprs OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds in the interval when there was Loss
of Power."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfIntervalEntry 4 }
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.5
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.5
zhoneVdslPerfIntervalLols OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds in the interval when there was Loss
of Link."
::= { zhoneVdslPerfIntervalEntry 5 }
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.6
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.6
zhoneVdslPerfIntervalESs OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Errored Seconds (ES) in the interval. An Errored
Second is a one-second interval containing one or more CRC
anomalies, one or more LOS or LOF defects."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfIntervalEntry 6 }
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.7
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.7
zhoneVdslPerfIntervalSESs OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Severely Errored Seconds in the interval."
::= { zhoneVdslPerfIntervalEntry 7 }
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.8
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.8
zhoneVdslPerfIntervalUASs OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Unavailable Seconds in the interval."
::= { zhoneVdslPerfIntervalEntry 8 }
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.9
-- 1.3.6.1.4.1.5504.5.13.1.1.5.1.9
zhoneVdslPerfIntervalInits OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the line initialization attempts during this
interval. This count includes both successful and
failed attempts."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerfIntervalEntry 9 }
-- 1.3.6.1.4.1.5504.5.13.1.1.6
-- 1.3.6.1.4.1.5504.5.13.1.1.6
zhoneVdslPerf1DayIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslPerf1DayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides one row for each VDSL performance
data collection interval. This table contains live data
from equipment. As such, it is NOT persistent."
::= { zhoneVdslMibObjects 6 }
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1
zhoneVdslPerf1DayIntervalEntry OBJECT-TYPE
SYNTAX ZhoneVdslPerf1DayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vdslPerf1DayIntervalTable."
INDEX { ifIndex, zhoneVdslPhysSide, zhoneVdslPerf1DayIntervalNumber }
::= { zhoneVdslPerf1DayIntervalTable 1 }
ZhoneVdslPerf1DayIntervalEntry ::=
SEQUENCE {
zhoneVdslPerf1DayIntervalNumber
Unsigned32,
zhoneVdslPerf1DayIntervalMoniSecs
HCPerfTimeElapsed,
zhoneVdslPerf1DayIntervalLofs
Unsigned32,
zhoneVdslPerf1DayIntervalLoss
Unsigned32,
zhoneVdslPerf1DayIntervalLprs
Unsigned32,
zhoneVdslPerf1DayIntervalLols
Unsigned32,
zhoneVdslPerf1DayIntervalESs
Unsigned32,
zhoneVdslPerf1DayIntervalSESs
Unsigned32,
zhoneVdslPerf1DayIntervalUASs
Unsigned32,
zhoneVdslPerf1DayIntervalInits
Unsigned32
}
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.1
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.1
zhoneVdslPerf1DayIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"History Data Interval number. Interval 1 is the most
recent previous day; interval 30 is 30 days ago. Intervals
2 to 30 are optional."
::= { zhoneVdslPerf1DayIntervalEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.2
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.2
zhoneVdslPerf1DayIntervalMoniSecs OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in the 1-day interval over which the
performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring data could not
be collected for any reason."
::= { zhoneVdslPerf1DayIntervalEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.3
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.3
zhoneVdslPerf1DayIntervalLofs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Frame (LOF) Seconds during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerf1DayIntervalEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.4
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.4
zhoneVdslPerf1DayIntervalLoss OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Signal (LOS) Seconds during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerf1DayIntervalEntry 4 }
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.5
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.5
zhoneVdslPerf1DayIntervalLprs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Power (LPR) Seconds during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerf1DayIntervalEntry 5 }
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.6
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.6
zhoneVdslPerf1DayIntervalLols OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Loss of Link (LOL) Seconds during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs."
::= { zhoneVdslPerf1DayIntervalEntry 6 }
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.7
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.7
zhoneVdslPerf1DayIntervalESs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Errored Seconds (ES) during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerf1DayIntervalEntry 7 }
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.8
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.8
zhoneVdslPerf1DayIntervalSESs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Severely Errored Seconds (SES) during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs."
::= { zhoneVdslPerf1DayIntervalEntry 8 }
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.9
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.9
zhoneVdslPerf1DayIntervalUASs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Unavailable Seconds (UAS) during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs."
::= { zhoneVdslPerf1DayIntervalEntry 9 }
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.10
-- 1.3.6.1.4.1.5504.5.13.1.1.6.1.10
zhoneVdslPerf1DayIntervalInits OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the line initialization attempts during the
1-day interval as measured by vdslPerf1DayIntervalMoniSecs.
This count includes both successful and failed attempts."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslPerf1DayIntervalEntry 10 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7
-- 1.3.6.1.4.1.5504.5.13.1.1.7
zhoneVdslChanPerfDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslChanPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides one row for each Vtu channel.
VDSL channel interfaces are those ifEntries where
ifType is equal to interleave(124) or fast(125)."
::= { zhoneVdslMibObjects 7 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1
zhoneVdslChanPerfDataEntry OBJECT-TYPE
SYNTAX ZhoneVdslChanPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vdslChanPerfDataTable."
INDEX { ifIndex, zhoneVdslPhysSide }
::= { zhoneVdslChanPerfDataTable 1 }
ZhoneVdslChanPerfDataEntry ::=
SEQUENCE {
zhoneVdslChanValidIntervals
Integer32,
zhoneVdslChanInvalidIntervals
Integer32,
zhoneVdslChanFixedOctets
Integer32,
zhoneVdslChanBadBlks
Integer32,
zhoneVdslChanCurr15MinTimeElapsed
Integer32,
zhoneVdslChanCurr15MinFixedOctets
Integer32,
zhoneVdslChanCurr15MinBadBlks
Integer32,
zhoneVdslChan1DayValidIntervals
Integer32,
zhoneVdslChan1DayInvalidIntervals
Integer32,
zhoneVdslChanCurr1DayTimeElapsed
Integer32,
zhoneVdslChanCurr1DayFixedOctets
Integer32,
zhoneVdslChanCurr1DayBadBlks
Integer32
}
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.1
zhoneVdslChanValidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
UNITS "intervals"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Intervals per definition found in
HC-PerfHist-TC-MIB."
::= { zhoneVdslChanPerfDataEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.2
zhoneVdslChanInvalidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
UNITS "intervals"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Invalid Intervals per definition found in
HC-PerfHist-TC-MIB."
::= { zhoneVdslChanPerfDataEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.3
zhoneVdslChanFixedOctets OBJECT-TYPE
SYNTAX Integer32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of corrected octets since the unit was last reset."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChanPerfDataEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.4
zhoneVdslChanBadBlks OBJECT-TYPE
SYNTAX Integer32
UNITS "blocks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of uncorrectable blocks since the unit was last
reset."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChanPerfDataEntry 4 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.5
zhoneVdslChanCurr15MinTimeElapsed OBJECT-TYPE
SYNTAX Integer32 (0..86399)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total elapsed seconds in this interval."
::= { zhoneVdslChanPerfDataEntry 5 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.6
zhoneVdslChanCurr15MinFixedOctets OBJECT-TYPE
SYNTAX Integer32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of corrected octets in this interval."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChanPerfDataEntry 6 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.7
zhoneVdslChanCurr15MinBadBlks OBJECT-TYPE
SYNTAX Integer32
UNITS "blocks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of uncorrectable blocks in this interval."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChanPerfDataEntry 7 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.8
zhoneVdslChan1DayValidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Intervals per definition found in
HC-PerfHist-TC-MIB."
::= { zhoneVdslChanPerfDataEntry 8 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.9
zhoneVdslChan1DayInvalidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Invalid Intervals per definition found in
HC-PerfHist-TC-MIB."
::= { zhoneVdslChanPerfDataEntry 9 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.10
zhoneVdslChanCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX Integer32 (0..86399)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of seconds that have elapsed since the beginning
of the current 1-day interval."
::= { zhoneVdslChanPerfDataEntry 10 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.11
zhoneVdslChanCurr1DayFixedOctets OBJECT-TYPE
SYNTAX Integer32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of corrected octets since the beginning of the
current 1-day interval."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChanPerfDataEntry 11 }
-- 1.3.6.1.4.1.5504.5.13.1.1.7.1.12
zhoneVdslChanCurr1DayBadBlks OBJECT-TYPE
SYNTAX Integer32
UNITS "blocks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of uncorrectable blocks since the beginning of the
current 1-day interval."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChanPerfDataEntry 12 }
-- 1.3.6.1.4.1.5504.5.13.1.1.8
-- 1.3.6.1.4.1.5504.5.13.1.1.8
zhoneVdslChanIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslChanIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides one row for each Vtu channel data
collection interval. VDSL channel interfaces are those
ifEntries where ifType is equal to interleave(124) or
fast(125)."
::= { zhoneVdslMibObjects 8 }
-- 1.3.6.1.4.1.5504.5.13.1.1.8.1
-- 1.3.6.1.4.1.5504.5.13.1.1.8.1
zhoneVdslChanIntervalEntry OBJECT-TYPE
SYNTAX ZhoneVdslChanIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vdslChanIntervalTable."
INDEX { ifIndex, zhoneVdslPhysSide, zhoneVdslChanIntervalNumber }
::= { zhoneVdslChanIntervalTable 1 }
ZhoneVdslChanIntervalEntry ::=
SEQUENCE {
zhoneVdslChanIntervalNumber
Unsigned32,
zhoneVdslChanIntervalFixedOctets
HCPerfIntervalCount,
zhoneVdslChanIntervalBadBlks
HCPerfIntervalCount
}
-- 1.3.6.1.4.1.5504.5.13.1.1.8.1.1
-- 1.3.6.1.4.1.5504.5.13.1.1.8.1.1
zhoneVdslChanIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Data Interval number 1 is the most recent
previous interval; interval 96 is 24 hours ago.
Intervals 2 to 96 are optional."
::= { zhoneVdslChanIntervalEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.8.1.2
-- 1.3.6.1.4.1.5504.5.13.1.1.8.1.2
zhoneVdslChanIntervalFixedOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of corrected octets in this interval."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChanIntervalEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.8.1.3
-- 1.3.6.1.4.1.5504.5.13.1.1.8.1.3
zhoneVdslChanIntervalBadBlks OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "blocks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of uncorrectable blocks in this interval."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChanIntervalEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.9
-- 1.3.6.1.4.1.5504.5.13.1.1.9
zhoneVdslChan1DayIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslChan1DayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides one row for each VDSL performance
data collection interval. This table contains live data
from equipment. As such, it is NOT persistent."
::= { zhoneVdslMibObjects 9 }
-- 1.3.6.1.4.1.5504.5.13.1.1.9.1
-- 1.3.6.1.4.1.5504.5.13.1.1.9.1
zhoneVdslChan1DayIntervalEntry OBJECT-TYPE
SYNTAX ZhoneVdslChan1DayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vdslChan1DayIntervalTable."
INDEX { ifIndex, zhoneVdslPhysSide, zhoneVdslChan1DayIntervalNumber }
::= { zhoneVdslChan1DayIntervalTable 1 }
ZhoneVdslChan1DayIntervalEntry ::=
SEQUENCE {
zhoneVdslChan1DayIntervalNumber
Unsigned32,
zhoneVdslChan1DayIntervalMoniSecs
HCPerfTimeElapsed,
zhoneVdslChan1DayIntervalFixedOctets
HCPerfCurrentCount,
zhoneVdslChan1DayIntervalBadBlks
HCPerfCurrentCount
}
-- 1.3.6.1.4.1.5504.5.13.1.1.9.1.1
-- 1.3.6.1.4.1.5504.5.13.1.1.9.1.1
zhoneVdslChan1DayIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"History Data Interval number. Interval 1 is the most
recent previous day; interval 30 is 30 days ago. Intervals
2 to 30 are optional."
::= { zhoneVdslChan1DayIntervalEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.9.1.2
-- 1.3.6.1.4.1.5504.5.13.1.1.9.1.2
zhoneVdslChan1DayIntervalMoniSecs OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in the 1-day interval over which the
performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring data could not
be collected for any reason."
::= { zhoneVdslChan1DayIntervalEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.9.1.3
-- 1.3.6.1.4.1.5504.5.13.1.1.9.1.3
zhoneVdslChan1DayIntervalFixedOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of corrected octets in this interval."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChan1DayIntervalEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.9.1.4
-- 1.3.6.1.4.1.5504.5.13.1.1.9.1.4
zhoneVdslChan1DayIntervalBadBlks OBJECT-TYPE
SYNTAX HCPerfCurrentCount
UNITS "blocks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of uncorrectable blocks in this interval."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
::= { zhoneVdslChan1DayIntervalEntry 4 }
-- profile tables
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11
-- 1.3.6.1.4.1.5504.5.13.1.1.11
zhoneVdslLineConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslLineConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on the VDSL line
configuration. One entry in this table reflects a
profile defined by a manager which can be used to
configure the VDSL line.
Entries in this table MUST be maintained in a
persistent manner."
::= { zhoneVdslMibObjects 11 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1
zhoneVdslLineConfProfileEntry OBJECT-TYPE
SYNTAX ZhoneVdslLineConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry consists of a list of parameters that
represents the configuration of a VDSL line.
A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this
document."
INDEX { ifIndex }
::= { zhoneVdslLineConfProfileTable 1 }
ZhoneVdslLineConfProfileEntry ::=
SEQUENCE {
zhoneVdslLineConfProfileName
SnmpAdminString,
zhoneVdslLineConfDownRateMode
INTEGER,
zhoneVdslLineConfUpRateMode
INTEGER,
zhoneVdslLineConfDownMaxPwr
Integer32,
zhoneVdslLineConfUpMaxPwr
Integer32,
zhoneVdslLineConfDownMaxSnrMgn
Unsigned32,
zhoneVdslLineConfDownMinSnrMgn
Unsigned32,
zhoneVdslLineConfDownTargetSnrMgn
Unsigned32,
zhoneVdslLineConfUpMaxSnrMgn
Unsigned32,
zhoneVdslLineConfUpMinSnrMgn
Unsigned32,
zhoneVdslLineConfUpTargetSnrMgn
Unsigned32,
zhoneVdslLineConfDownFastMaxDataRate
Unsigned32,
zhoneVdslLineConfDownFastMinDataRate
Unsigned32,
zhoneVdslLineConfDownSlowMaxDataRate
Unsigned32,
zhoneVdslLineConfDownSlowMinDataRate
Unsigned32,
zhoneVdslLineConfUpFastMaxDataRate
Unsigned32,
zhoneVdslLineConfUpFastMinDataRate
Unsigned32,
zhoneVdslLineConfUpSlowMaxDataRate
Unsigned32,
zhoneVdslLineConfUpSlowMinDataRate
Unsigned32,
zhoneVdslLineConfDownRateRatio
Unsigned32,
zhoneVdslLineConfUpRateRatio
Unsigned32,
zhoneVdslLineConfDownMaxInterDelay
Unsigned32,
zhoneVdslLineConfUpMaxInterDelay
Unsigned32,
zhoneVdslLineConfDownPboControl
INTEGER,
zhoneVdslLineConfUpPboControl
INTEGER,
zhoneVdslLineConfDownPboLevel
Unsigned32,
zhoneVdslLineConfUpPboLevel
Unsigned32,
zhoneVdslLineConfDeploymentScenario
INTEGER,
zhoneVdslLineConfAdslPresence
INTEGER,
zhoneVdslLineConfApplicableStandard
INTEGER,
zhoneVdslLineConfBandPlan
INTEGER,
zhoneVdslLineConfBandPlanFx
Unsigned32,
zhoneVdslLineConfBandOptUsage
INTEGER,
zhoneVdslLineConfUpPsdTemplate
INTEGER,
zhoneVdslLineConfDownPsdTemplate
INTEGER,
zhoneVdslLineConfHamBandMask
BITS,
zhoneVdslLineConfCustomNotch1Start
Unsigned32,
zhoneVdslLineConfCustomNotch1Stop
Unsigned32,
zhoneVdslLineConfCustomNotch2Start
Unsigned32,
zhoneVdslLineConfCustomNotch2Stop
Unsigned32,
zhoneVdslLineConfDownTargetSlowBurst
Unsigned32,
zhoneVdslLineConfUpTargetSlowBurst
Unsigned32,
zhoneVdslLineConfDownMaxFastFec
Unsigned32,
zhoneVdslLineConfUpMaxFastFec
Unsigned32,
zhoneVdslLineConfLineType
INTEGER,
zhoneVdslLineConfProfRowStatus
RowStatus,
zhoneVdslLineConfTransmissionMode
INTEGER,
zhoneVdslLineConfVdsl2Profile
INTEGER,
zhoneVdslLineConfVdslMode
INTEGER,
zhoneVdslLineConfPboElectricalOverride
Integer32,
zhoneVdslLineConfAutoModeCrtrn
INTEGER,
zhoneVdslLineConfNetworkTimingRef
INTEGER,
zhoneVdslLineConfAdslBandMode
INTEGER,
zhoneVdslLineConfAdslBandModeEndFreq
Integer32,
zhoneVdslLineConfSeltEchoMeasurementTime
Integer32,
zhoneVdslLineConfSeltNoiseMeasurementTime
Integer32,
zhoneVdslLineConfSeltAgc
Integer32,
zhoneVdslLineConfDownTrellis
INTEGER,
zhoneVdslLineConfUpTrellis
INTEGER,
zhoneVdslLineConfDownMaxAggregateTxPwr
INTEGER,
zhoneVdslLineConfUpMaxAggregateTxPwr
INTEGER,
zhoneVdslLineConfDownMaxPsd
Integer32,
zhoneVdslLineConfUpMaxPsd
Integer32,
zhoneVdslLineConfDownPsdShape
INTEGER,
zhoneVdslLineConfUpPsdShape
INTEGER,
zhoneVdslLineConfDownVirtualNoiseSnrMode
INTEGER,
zhoneVdslLineConfUpVirtualNoiseSnrMode
INTEGER,
zhoneVdslLineConfDownErasureDetectionFast
INTEGER,
zhoneVdslLineConfUpErasureDetectionFast
INTEGER,
zhoneVdslLineConfDownErasureDetectionInterleave
INTEGER,
zhoneVdslLineConfUpErasureDetectionInterleave
INTEGER,
zhoneVdslLineConfDownGhsA43TonePwr
INTEGER,
zhoneVdslLineConfDownGhsB43TonePwr
INTEGER,
zhoneVdslLineConfDownGhsA43cTonePwr
INTEGER,
zhoneVdslLineConfDownGhsV43TonePwr
INTEGER,
zhoneVdslLineConfDownGhsA43TonePwrMaxLvl
Integer32,
zhoneVdslLineConfDownGhsB43TonePwrMaxLvl
Integer32,
zhoneVdslLineConfDownGhsA43cTonePwrMaxLvl
Integer32,
zhoneVdslLineConfDownGhsV43TonePwrMaxLvl
Integer32,
zhoneVdslLineConfDownRsCoding
INTEGER,
zhoneVdslLineConfUpRsCoding
INTEGER,
zhoneVdslLineConfUpPboPsdTemplate
INTEGER,
zhoneVdslLineConfUpPboPsdParamA1
Integer32,
zhoneVdslLineConfUpPboPsdParamA2
Integer32,
zhoneVdslLineConfUpPboPsdParamB1
Integer32,
zhoneVdslLineConfUpPboPsdParamB2
Integer32,
zhoneVdslLineConfDownDownshiftSnrMgn
Integer32,
zhoneVdslLineConfDownUpshiftSnrMgn
Integer32,
zhoneVdslLineConfDownMinDownshiftTime
Integer32,
zhoneVdslLineConfDownMinUpshiftTime
Integer32,
zhoneVdslLineConfUpDownshiftSnrMgn
Integer32,
zhoneVdslLineConfUpUpshiftSnrMgn
Integer32,
zhoneVdslLineConfUpMinDownshiftTime
Integer32,
zhoneVdslLineConfUpMinUpshiftTime
Integer32,
zhoneVdslLineConfDownMinTxThresholdAlarm
Unsigned32,
zhoneVdslLineConfUpMinTxThresholdAlarm
Unsigned32,
zhoneVdslLineConfPotsBypassRelayMaxDuration
INTEGER,
zhoneVdslLineConfDMTConfMode
INTEGER,
zhoneVdslLineConfDownBitSwap
INTEGER,
zhoneVdslLineConfUpBitSwap
INTEGER,
zhoneVdslLineConfAdslAnnexMModeEnabled
TruthValue,
zhoneVdslLineConfAdslAnnexMPsdMask
INTEGER,
zhoneVdslLineConfUs0BoundaryTone
INTEGER,
zhoneVdslLineConfDownInp
INTEGER,
zhoneVdslLineConfUpInp
INTEGER,
zhoneVdslLineConfDownMaxInterleavingDelay
INTEGER,
zhoneVdslLineConfUpMaxInterleavingDelay
INTEGER,
zhoneVdslLineConfDownPsdMaskEnable
INTEGER,
zhoneVdslLineConfUpPsdMaskEnable
INTEGER,
zhoneVdslLineConfDownPsdMaskSelect
INTEGER,
zhoneVdslLineConfUpPsdMaskSelect
INTEGER,
zhoneVdslLineEnableTrellisCoding
TruthValue,
zhoneVdslLineEnableRsCoding
TruthValue,
zhoneVdslLineConfPsdShape
INTEGER,
zhoneVdslLineConfDownPhyRSupport
INTEGER,
zhoneVdslLineConfUpPhyRSupport
INTEGER,
zhoneVdslLineConfDownPhyRmaxINP
INTEGER,
zhoneVdslLineConfUpPhyRmaxINP
INTEGER,
zhoneVdslLineConfDownPhyRminRSoverhead
INTEGER,
zhoneVdslLineConfUpPhyRminRSoverhead
INTEGER,
zhoneVdslLineConfDownPhyRRtxRatio
INTEGER,
zhoneVdslLineConfUpPhyRRtxRatio
INTEGER,
zhoneVdslLineConfUpPboPsdParamA3
Integer32,
zhoneVdslLineConfUpPboPsdParamA4
Integer32,
zhoneVdslLineConfUpPboPsdParamB3
Integer32,
zhoneVdslLineConfUpPboPsdParamB4
Integer32,
zhoneVdslLineConfFallbackDefaultVpi
Unsigned32,
zhoneVdslLineConfFallbackDefaultVci
Unsigned32,
zhoneVdslLineConfDownGinpSupport
INTEGER,
zhoneVdslLineConfUpGinpSupport
INTEGER,
zhoneVdslLineConfDownGinpEtrMax
Unsigned32,
zhoneVdslLineConfUpGinpEtrMax
Unsigned32,
zhoneVdslLineConfDownGinpEtrMin
Unsigned32,
zhoneVdslLineConfUpGinpEtrMin
Unsigned32,
zhoneVdslLineConfDownGinpNdrMax
Unsigned32,
zhoneVdslLineConfUpGinpNdrMax
Unsigned32,
zhoneVdslLineConfDownGinpShineRatio
Unsigned32,
zhoneVdslLineConfUpGinpShineRatio
Unsigned32,
zhoneVdslLineConfDownGinpLeftrThreshold
Unsigned32,
zhoneVdslLineConfUpGinpLeftrThreshold
Unsigned32,
zhoneVdslLineConfDownGinpMaxDelay
Unsigned32,
zhoneVdslLineConfUpGinpMaxDelay
Unsigned32,
zhoneVdslLineConfDownGinpMinDelay
Unsigned32,
zhoneVdslLineConfUpGinpMinDelay
Unsigned32,
zhoneVdslLineConfDownGinpMin
Unsigned32,
zhoneVdslLineConfUpGinpMin
Unsigned32,
zhoneVdslLineConfDownGinpMinRSoverhead
Unsigned32,
zhoneVdslLineConfUpGinpMinRSoverhead
Unsigned32,
zhoneVdslLineConfDownGinpReinCfg
Unsigned32,
zhoneVdslLineConfUpGinpReinCfg
Unsigned32,
zhoneVdslLineConfDownGinpReinFreq
INTEGER,
zhoneVdslLineConfUpGinpReinFreq
INTEGER,
zhoneVdslLineConfDownGinpRtxMode
INTEGER,
zhoneVdslLineConfUpGinpRtxMode
INTEGER
}
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.1
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.1
zhoneVdslLineConfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table.
A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this
document."
::= { zhoneVdslLineConfProfileEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.2
zhoneVdslLineConfDownRateMode OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
adapt-at-init(2),
dynamic(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the rate selection behavior for the line
in the downstream direction.
manual(1) forces the rate to the configured rate
adaptAtInit(2) adapts the line at initialization only
dynamic(3) adapts the line at initialization and showtime"
DEFVAL { dynamic }
::= { zhoneVdslLineConfProfileEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.3
zhoneVdslLineConfUpRateMode OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
adapt-at-init(2),
dynamic(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the rate selection behavior for the line
in the upstream direction.
manual(1) forces the rate to the configured rate
adaptAtInit(2) adapts the line at initialization only
dynamic(3) adapts the line at initialization and showtime"
DEFVAL { dynamic }
::= { zhoneVdslLineConfProfileEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.4
zhoneVdslLineConfDownMaxPwr OBJECT-TYPE
SYNTAX Integer32 (-50..200)
UNITS "0.10dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum aggregate downstream power
level in the range -5.0 to 20.0 dBm."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
DEFVAL { 145 }
::= { zhoneVdslLineConfProfileEntry 4 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.5
zhoneVdslLineConfUpMaxPwr OBJECT-TYPE
SYNTAX Integer32 (-130..200)
UNITS "0.10dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum aggregate upstream power
level in the range -13.0 to 20.0 dBm."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
DEFVAL { 145 }
::= { zhoneVdslLineConfProfileEntry 5 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.6
zhoneVdslLineConfDownMaxSnrMgn OBJECT-TYPE
SYNTAX Unsigned32 (0..310)
UNITS "0.10dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum downstream Signal/Noise Margin
in units of 0.10 dB, for a range of 0 to 31.0 dB."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
DEFVAL { 160 }
::= { zhoneVdslLineConfProfileEntry 6 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.7
zhoneVdslLineConfDownMinSnrMgn OBJECT-TYPE
SYNTAX Unsigned32 (0..310)
UNITS "0.10dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the minimum downstream Signal/Noise Margin
in units of 0.10 dB, for a range of 0 to 31.0 dB."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 7 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.8
zhoneVdslLineConfDownTargetSnrMgn OBJECT-TYPE
SYNTAX Unsigned32 (0..310)
UNITS "0.10dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the target downstream Signal/Noise Margin
in units of 0.10 dB, for a range of 0 to 31.0 dB.
This is the Noise Margin the transceivers must achieve
with a BER of 10^-7 or better to successfully complete
initialization."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
DEFVAL { 24 }
::= { zhoneVdslLineConfProfileEntry 8 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.9
zhoneVdslLineConfUpMaxSnrMgn OBJECT-TYPE
SYNTAX Unsigned32 (0..310)
UNITS "0.10dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum upstream Signal/Noise Margin
in units of 0.10 dB, for a range of 0 to 31.0 dB."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
DEFVAL { 160 }
::= { zhoneVdslLineConfProfileEntry 9 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.10
zhoneVdslLineConfUpMinSnrMgn OBJECT-TYPE
SYNTAX Unsigned32 (0..310)
UNITS "0.10dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the minimum upstream Signal/Noise Margin
in units of 0.10 dB, for a range of 0 to 31.0 dB."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 10 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.11
zhoneVdslLineConfUpTargetSnrMgn OBJECT-TYPE
SYNTAX Unsigned32 (0..310)
UNITS "0.10dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the target upstream Signal/Noise Margin in
units of 0.10 dB, for a range of 0 to 31.0 dB. This
is the Noise Margin the transceivers must achieve with
a BER of 10^-7 or better to successfully complete
initialization."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
DEFVAL { 24 }
::= { zhoneVdslLineConfProfileEntry 11 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.12
zhoneVdslLineConfDownFastMaxDataRate OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum downstream fast channel
data rate in steps of 1000 bits/second."
DEFVAL { 200000 }
::= { zhoneVdslLineConfProfileEntry 12 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.13
zhoneVdslLineConfDownFastMinDataRate OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the minimum downstream fast channel
data rate in steps of 1000 bits/second."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 13 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.14
zhoneVdslLineConfDownSlowMaxDataRate OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum downstream slow channel
data rate in steps of 1000 bits/second.
The maximum aggregate downstream transmit speed
of the line can be derived from the sum of maximum
downstream fast and slow channel data rates."
DEFVAL { 200000 }
::= { zhoneVdslLineConfProfileEntry 14 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.15
zhoneVdslLineConfDownSlowMinDataRate OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the minimum downstream slow channel
data rate in steps of 1000 bits/second.
The minimum aggregate downstream transmit speed
of the line can be derived from the sum of minimum
downstream fast and slow channel data rates."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 15 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.16
zhoneVdslLineConfUpFastMaxDataRate OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum upstream fast channel
data rate in steps of 1000 bits/second.
The maximum aggregate upstream transmit speed
of the line can be derived from the sum of maximum
upstream fast and slow channel data rates."
DEFVAL { 200000 }
::= { zhoneVdslLineConfProfileEntry 16 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.17
zhoneVdslLineConfUpFastMinDataRate OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the minimum upstream fast channel
data rate in steps of 1000 bits/second.
The minimum aggregate upstream transmit speed
of the line can be derived from the sum of minimum
upstream fast and slow channel data rates."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 17 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.18
zhoneVdslLineConfUpSlowMaxDataRate OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum upstream slow channel
data rate in steps of 1000 bits/second."
DEFVAL { 200000 }
::= { zhoneVdslLineConfProfileEntry 18 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.19
zhoneVdslLineConfUpSlowMinDataRate OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the minimum upstream slow channel
data rate in steps of 1000 bits/second."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 19 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.20
zhoneVdslLineConfDownRateRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For dynamic rate adaptation at startup, the allocation
of data rate in excess of the minimum data rate for each
channel is controlled by the object. This object specifies
the ratio of the allocation of the excess data rate between
the fast and the slow channels. This allocation represents
downstream Fast Channel Allocation / Slow Channel
Allocation."
DEFVAL { 50 }
::= { zhoneVdslLineConfProfileEntry 20 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.21
zhoneVdslLineConfUpRateRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For dynamic rate adaptation at startup, the allocation
of data rate in excess of the minimum data rate for each
channel is controlled by the object. This object specifies
the ratio of the allocation of the excess data rate between
the fast and the slow channels. This allocation represents
upstream Fast Channel Allocation/Slow Channel Allocation."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 21 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.22
zhoneVdslLineConfDownMaxInterDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum interleave delay for the
downstream slow channel."
DEFVAL { 80 }
::= { zhoneVdslLineConfProfileEntry 22 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.23
zhoneVdslLineConfUpMaxInterDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum interleave delay for the
upstream slow channel."
DEFVAL { 80 }
::= { zhoneVdslLineConfProfileEntry 23 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.24
zhoneVdslLineConfDownPboControl OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
auto(2),
manual(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Downstream power backoff (PBO) control for this
line. For transceivers which do not support downstream
PBO control, this object MUST be fixed at disabled(1).
If auto(2) is selected, the transceiver will automatically
adjust the power backoff. If manual(3) is selected,
then the transceiver will use the value from
zhoneVdslLineConfDownPboLevel."
DEFVAL { disabled }
::= { zhoneVdslLineConfProfileEntry 24 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.25
zhoneVdslLineConfUpPboControl OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
auto(2),
manual(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Upstream power backoff (PBO) control for this
line. For transceivers which do not support upstream
PBO control, this object MUST be fixed at disabled(1).
If auto(2) is selected, the transceiver will automatically
adjust the power backoff. If manual(3) is selected,
then the transceiver will use the value from
zhoneVdslLineConfUpPboLevel."
DEFVAL { disabled }
::= { zhoneVdslLineConfProfileEntry 25 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.26
zhoneVdslLineConfDownPboLevel OBJECT-TYPE
SYNTAX Unsigned32 (0..160)
UNITS "0.25dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the downstream backoff level to be used
when vdslLineConfDownPboControl = manual(3)."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 26 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.27
zhoneVdslLineConfUpPboLevel OBJECT-TYPE
SYNTAX Unsigned32 (0..160)
UNITS "0.25dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the upstream backoff level to be used
when vdslLineConfUpPboControl = manual(3)."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 27 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.28
zhoneVdslLineConfDeploymentScenario OBJECT-TYPE
SYNTAX INTEGER
{
fttCab(1),
fttEx(2),
other(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VDSL line deployment scenario. When using
fttCab(1), the VTU-C is located in a street cabinet.
When using fttEx(2), the VTU-C is located at the
central office. Changes to this value will have
no effect on the transceiver."
REFERENCE
"DSL Forum TR-057"
DEFVAL { fttCab }
::= { zhoneVdslLineConfProfileEntry 28 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.29
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.29
zhoneVdslLineConfAdslPresence OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
adslOverPots(2),
adslOverISDN(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates presence of ADSL service in the associated
cable bundle/binder.
none(1) indicates no ADSL service in the bundle
adslOverPots(2) indicates ADSL service over POTS is
present in the bundle
adslOverISDN(3) indicates ADSL service over ISDN is
present in the bundle"
DEFVAL { none }
::= { zhoneVdslLineConfProfileEntry 29 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.30
zhoneVdslLineConfApplicableStandard OBJECT-TYPE
SYNTAX INTEGER
{
ansi(1),
etsi(2),
itu(3),
other(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VDSL standard to be used for the line.
ansi(1) indicates ANSI standard
etsi(2) indicates ETSI standard
itu(3) indicates ITU standard
other(4) indicates a standard other than the above."
DEFVAL { ansi }
::= { zhoneVdslLineConfProfileEntry 30 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.31
zhoneVdslLineConfBandPlan OBJECT-TYPE
SYNTAX INTEGER
{
bandPlan997(1),
bandPlan998(2),
bandPlanFx(3),
other(4),
bandPlan997-2(5),
bandPlan997-3(6),
bandPlan998-2(7),
bandPlan998-3(8),
bandPlan998-17-6(9),
fx-2(10),
fx-3(11),
china-a-2(12),
china-a-3(13),
china-b-2(14),
china-b-3(15)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VDSL band plan to be used for the line.
bandPlan997(1) is to be used for
ITU-T G.993.1 Bandplan-B
ETSI Bandplan
ANSI Plan 997
bandPlan998(2) is to be used for
ITU-T G.993.1 Bandplan-A
ANSI Plan 998
bandPlanFx(3) is to be used for
ITU-T G.993.1 Bandplan-C.
other(4) is to be used for
non-standard bandplans.
If this object is set to bandPlanFx(3), then the
object vdslLineConfBandPlanFx MUST also be set."
DEFVAL { bandPlan998 }
::= { zhoneVdslLineConfProfileEntry 31 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.32
zhoneVdslLineConfBandPlanFx OBJECT-TYPE
SYNTAX Unsigned32 (3750..12000)
UNITS "kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The frequency limit between bands D2 and U2 when
zhoneVdslLineConfBandPlan is set to bandPlanFx(3)."
DEFVAL { 3750 }
::= { zhoneVdslLineConfProfileEntry 32 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.33
zhoneVdslLineConfBandOptUsage OBJECT-TYPE
SYNTAX INTEGER
{
unused(1),
upstream(2),
downstream(3),
upstream-forced(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the VDSL link use of the optional frequency
range [25kHz - 138kHz] (Opt).
unused(1) indicates Opt is unused
upstream(2) indicates Opt usage is for upstream
downstream(3) indicates Opt usage is for downstream.
upstreamForced(4) indicates forced upstream"
REFERENCE
"ITU-T G.993.1, section 6.1"
DEFVAL { upstream }
::= { zhoneVdslLineConfProfileEntry 33 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.34
zhoneVdslLineConfUpPsdTemplate OBJECT-TYPE
SYNTAX INTEGER
{
ansi-fftex-m1(3),
ansi-fftex-m2(4),
ansi-fftcab-m1(5),
fftcab-m2(6),
etsi-m1(7),
etsi-m2(8),
psd-custom(9)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object has been modified by Zhone.
The upstream PSD template to be used for the line.
Here, templateMask1(1) refers to a notched mask that
limits the transmitted PSD within the internationally
standardized HAM (Handheld Amateur Radio) radio bands,
while templateMask2(2) refers to an unnotched mask.
The masks themselves depend upon the applicable
standard being used (vdslLineConfApplicableStandard)."
REFERENCE
"DSL TR-057"
DEFVAL { ansi-fftcab-m1 }
::= { zhoneVdslLineConfProfileEntry 34 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.35
zhoneVdslLineConfDownPsdTemplate OBJECT-TYPE
SYNTAX INTEGER
{
ansi-fftex-m1(3),
ansi-fftex-m2(4),
ansi-fftcab-m1(5),
fftcab-m2(6),
fftcab-m1-adsl(7),
fftcab-m1-adslplus(8),
fftcab-m2-adsl(9),
fftcab-m2-adslplus(10),
etsi-pexp1-m1(11),
etsi-pexp1-m2(12),
etsi-pexp2-m1(13),
etsi-pexp2-m2(14),
psd-custom(15),
etsi-pexm2-sample1(16),
etsi-pexm2-sample2(17),
etsi-pexm2-sample3(18),
etsi-pexm2-sample4(19),
etsi-pcab-m1(20),
etsi-pcab-m2(21)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object has been modified by Zhone.
The downstream PSD template to be used for the line.
Here, templateMask1(1) refers to a notched mask that
limits the transmitted PSD within the internationally
standardized HAM (Handheld Amateur Radio) radio bands,
while templateMask2(2) refers to an unnotched mask.
The masks themselves depend upon the applicable
standard being used (vdslLineConfApplicableStandard)."
REFERENCE
"DSL TR-057"
DEFVAL { ansi-fftcab-m1 }
::= { zhoneVdslLineConfProfileEntry 35 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.36
zhoneVdslLineConfHamBandMask OBJECT-TYPE
SYNTAX BITS
{
customNotch1(0),
customNotch2(1),
amateurBand30m(2),
amateurBand40m(3),
amateurBand80m(4),
amateurBand160m(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The transmit power spectral density mask code, used
to avoid interference with HAM (Handheld Amateur Radio)
radio bands by introducing power control (notching) in one
or more of these bands.
Amateur radio band notching is defined in the VDSL
spectrum as follows:
Band Start Frequency Stop Frequency
---- ------------------ --------------------------------
30m 1810 kHz 2000 kHz
40m 3500 kHz 3800 kHz (ETSI); 4000 kHz (ANSI)
80m 7000 kHz 7100 kHz (ETSI); 7300 kHz (ANSI)
160m 10100 kHz 10150 kHz
Notching for each standard band can be enabled or disabled
via the bit mask.
Two custom notches may be specified. If either of these
are enabled via the bit mask, then the following objects
MUST be specified:
If customNotch1 is enabled, then both
zhoneVdslLineConfCustomNotch1Start
zhoneVdslLineConfCustomNotch1Stop
MUST be specified.
If customNotch2 is enabled, then both
zhoneVdslLineConfCustomNotch2Start
zhoneVdslLineConfCustomNotch2Stop
MUST be specified."
REFERENCE
"DSLF TR-057, section 2.6"
::= { zhoneVdslLineConfProfileEntry 36 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.37
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.37
zhoneVdslLineConfCustomNotch1Start OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the start frequency of custom HAM (Handheld
Amateur Radio) notch 1. zhoneVdslLineConfCustomNotch1Start MUST
be less than or equal to vdslLineConfCustomNotch1Stop."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 37 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.38
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.38
zhoneVdslLineConfCustomNotch1Stop OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the stop frequency of custom HAM (Handheld
Amateur Radio) notch 1. zhoneVdslLineConfCustomNotch1Stop MUST
be greater than or equal to vdslLineConfCustomNotch1Start."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 38 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.39
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.39
zhoneVdslLineConfCustomNotch2Start OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the start frequency of custom HAM (Handheld
Amateur Radio) notch 2. zhoneVdslLineConfCustomNotch2Start MUST
be less than or equal to vdslLineConfCustomNotch2Stop."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 39 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.40
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.40
zhoneVdslLineConfCustomNotch2Stop OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the stop frequency of custom HAM (Handheld
Amateur Radio) notch 2. zhoneVdslLineConfCustomNotch2Stop MUST
be greater than or equal to vdslLineConfCustomNotch2Start."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 40 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.41
zhoneVdslLineConfDownTargetSlowBurst OBJECT-TYPE
SYNTAX Unsigned32 (0..1275)
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the target level of impulse noise (burst)
protection for an interleaved (slow) channel."
REFERENCE
"ITU-T G.997.1, section 7.3.2.3"
DEFVAL { 5 }
::= { zhoneVdslLineConfProfileEntry 41 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.42
zhoneVdslLineConfUpTargetSlowBurst OBJECT-TYPE
SYNTAX Unsigned32 (0..1275)
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the target level of impulse noise (burst)
protection for an interleaved (slow) channel."
REFERENCE
"ITU-T G.997.1, section 7.3.2.3"
DEFVAL { 5 }
::= { zhoneVdslLineConfProfileEntry 42 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.43
zhoneVdslLineConfDownMaxFastFec OBJECT-TYPE
SYNTAX Unsigned32 (0..50)
UNITS "%"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter provisions the maximum level of Forward
Error Correction (FEC) redundancy related overhead to
be maintained for a fast channel."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 43 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.44
zhoneVdslLineConfUpMaxFastFec OBJECT-TYPE
SYNTAX Unsigned32 (0..50)
UNITS "%"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter provisions the maximum level of Forward
Error Correction (FEC) redundancy related overhead to
be maintained for a fast channel."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 44 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.45
zhoneVdslLineConfLineType OBJECT-TYPE
SYNTAX INTEGER
{
noChannel(1),
fastOnly(2),
interleavedOnly(3),
fastOrInterleaved(4),
fastAndInterleaved(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter provisions the VDSL physical entity at
start-up by defining whether and how the line will be
channelized, i.e., which channel type(s) are supported.
If the line is to be channelized, the value will be other
than noChannel(1).
This configuration can be activated only during start-up.
Afterwards, the value of zhoneVdslLineType coincides with the
value of zhoneVdslLineConfLineType. Depending on this value,
the corresponding entries in the ifTable for the
interleaved and the fast channels are enabled or disabled
according to the value of their ifOperStatus.
Defined values are:
noChannel(1) -- no channels exist
fastOnly(2) -- only fast channel exists
interleavedOnly(3) -- only interleaved channel exists
fastOrInterleaved(4) -- either fast or interleaved channel
-- exists, but only one at a time
fastAndInterleaved(5) -- both fast and interleaved channels
-- exist
Note that 'slow' and 'interleaved' refer to the same
channel."
REFERENCE
"T1E1.4/2000-009R3, Part 1, common spec"
DEFVAL { fastOnly }
::= { zhoneVdslLineConfProfileEntry 45 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.46
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.47
zhoneVdslLineConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'outOfService'),
it must be first unreferenced from all associated lines.
An 'active' profile may be modified at any time. Note
that some changes may require that any referenced lines be
restarted (e.g., zhoneVdslLineConfLineType)."
::= { zhoneVdslLineConfProfileEntry 47 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.48
zhoneVdslLineConfTransmissionMode OBJECT-TYPE
SYNTAX INTEGER
{
autoNegotiateMode(1),
vdslMode(2),
vdsl2Mode(3),
adsl2PlusMode(4),
adsl2Mode(5),
gdmtMode(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The transmission standard to be used for the line."
DEFVAL { autoNegotiateMode }
::= { zhoneVdslLineConfProfileEntry 48 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.49
zhoneVdslLineConfVdsl2Profile OBJECT-TYPE
SYNTAX INTEGER
{
g993-2-8a(1),
g993-2-8b(2),
g993-2-8c(3),
g993-2-8d(4),
g993-2-12a(5),
g993-2-12b(6),
g993-2-17a(7),
g993-2-30a(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VDSL2 standard to be used for the line."
DEFVAL { g993-2-12a }
::= { zhoneVdslLineConfProfileEntry 49 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.50
zhoneVdslLineConfVdslMode OBJECT-TYPE
SYNTAX INTEGER
{
standard(1),
long-reach-8k(2),
r8k(3),
std-8k(4),
lr-8k(5),
std-lr(6),
std-lr-8k(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls which VDSL modes are available on the line."
DEFVAL { standard }
::= { zhoneVdslLineConfProfileEntry 50 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.51
zhoneVdslLineConfPboElectricalOverride OBJECT-TYPE
SYNTAX Integer32 (0..256)
UNITS ".5 dBm/Mhz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Override electrical length estimated by VUTU_C.
The special value 256 means do not perform
override."
DEFVAL { 256 }
::= { zhoneVdslLineConfProfileEntry 51 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.52
zhoneVdslLineConfAutoModeCrtrn OBJECT-TYPE
SYNTAX INTEGER
{
crtrn-chip-prop(1),
optimize-us(2),
optimize-ds(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines the policy to select optimal mode of oepration."
DEFVAL { optimize-us }
::= { zhoneVdslLineConfProfileEntry 52 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.53
zhoneVdslLineConfNetworkTimingRef OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable reference clock source."
DEFVAL { disable }
::= { zhoneVdslLineConfProfileEntry 53 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.54
zhoneVdslLineConfAdslBandMode OBJECT-TYPE
SYNTAX INTEGER
{
allowed(1),
not-allowed(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether the XDSL can use the ADSL spectrum or not."
DEFVAL { allowed }
::= { zhoneVdslLineConfProfileEntry 54 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.55
zhoneVdslLineConfAdslBandModeEndFreq OBJECT-TYPE
SYNTAX Integer32 (276..2208)
UNITS "kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the ADSL band end frequency when
the ADSL band usage is not allowed."
DEFVAL { 1104 }
::= { zhoneVdslLineConfProfileEntry 55 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.56
zhoneVdslLineConfSeltEchoMeasurementTime OBJECT-TYPE
SYNTAX Integer32 (5..240)
UNITS "secs"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Contains the SELT echo measurement time"
DEFVAL { 50 }
::= { zhoneVdslLineConfProfileEntry 56 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.57
zhoneVdslLineConfSeltNoiseMeasurementTime OBJECT-TYPE
SYNTAX Integer32 (5..240)
UNITS "secs"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Contains the SELT noise measurement time."
DEFVAL { 50 }
::= { zhoneVdslLineConfProfileEntry 57 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.58
zhoneVdslLineConfSeltAgc OBJECT-TYPE
SYNTAX Integer32 (-100..100)
UNITS "1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Contains the SELT AGC gain value."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 58 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.59
zhoneVdslLineConfDownTrellis OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables/disables downstream Trellis coding."
DEFVAL { enable }
::= { zhoneVdslLineConfProfileEntry 59 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.60
zhoneVdslLineConfUpTrellis OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables/disables upstream Trellis coding."
DEFVAL { enable }
::= { zhoneVdslLineConfProfileEntry 60 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.61
zhoneVdslLineConfDownMaxAggregateTxPwr OBJECT-TYPE
SYNTAX INTEGER { unlimited(4) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum total power that is allowed to be transmitted
in the downstream direction."
DEFVAL { unlimited }
::= { zhoneVdslLineConfProfileEntry 61 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.62
zhoneVdslLineConfUpMaxAggregateTxPwr OBJECT-TYPE
SYNTAX INTEGER { unlimited(4) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum total power that is allowed to be transmitted
in the upstream direction."
DEFVAL { unlimited }
::= { zhoneVdslLineConfProfileEntry 62 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.63
zhoneVdslLineConfDownMaxPsd OBJECT-TYPE
SYNTAX Integer32 (-955..0)
UNITS ".1 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum power spectral density level
allowed on the line at the transmitter
output downstream for initialization and
showtime signals."
DEFVAL { -1 }
::= { zhoneVdslLineConfProfileEntry 63 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.64
zhoneVdslLineConfUpMaxPsd OBJECT-TYPE
SYNTAX Integer32 (-955..0)
UNITS ".1 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum power spectral density level
allowed on the line at the transmitter
output upstream for initialization and
showtime signals."
DEFVAL { -1 }
::= { zhoneVdslLineConfProfileEntry 64 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.65
zhoneVdslLineConfDownPsdShape OBJECT-TYPE
SYNTAX INTEGER
{
custom-psd(1),
region-a-psd(2),
region-c-psd(3),
region-b-m1-a-psd(4),
region-b-m1-b-psd(5),
region-b-m1-us0-psd(6),
region-b-m2-a-psd(7),
region-b-m2-m-psd(8),
region-b-m2-b-psd(9),
region-b-m2-us0-psd(10)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum transmit PSD allowed in the downstream
channel on a VDSL2 line."
DEFVAL { region-a-psd }
::= { zhoneVdslLineConfProfileEntry 65 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.66
zhoneVdslLineConfUpPsdShape OBJECT-TYPE
SYNTAX INTEGER
{
custom-psd(1),
region-a-psd(2),
region-c-psd(3),
region-b-m1-a-psd(4),
region-b-m1-b-psd(5),
region-b-m1-us0-psd(6),
region-b-m2-a-psd(7),
region-b-m2-m-psd(8),
region-b-m2-b-psd(9),
region-b-m2-us0-psd(10)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum transmit PSD allowed in the upstream
channel on a VDSL2 line."
DEFVAL { region-a-psd }
::= { zhoneVdslLineConfProfileEntry 66 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.67
zhoneVdslLineConfDownVirtualNoiseSnrMode OBJECT-TYPE
SYNTAX INTEGER
{
mode1(1),
mode2(2),
mode3(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Downstream virtual noise SNR mode on a VDSL2
line."
DEFVAL { mode1 }
::= { zhoneVdslLineConfProfileEntry 67 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.68
zhoneVdslLineConfUpVirtualNoiseSnrMode OBJECT-TYPE
SYNTAX INTEGER
{
mode1(1),
mode2(2),
mode3(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Upstream virtual noise SNR mode on a VDSL2
line."
DEFVAL { mode1 }
::= { zhoneVdslLineConfProfileEntry 68 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.69
zhoneVdslLineConfDownErasureDetectionFast OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the erasure detection
mechanism should be enabled or disabled in
the downstream fast channel."
DEFVAL { enable }
::= { zhoneVdslLineConfProfileEntry 69 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.70
zhoneVdslLineConfUpErasureDetectionFast OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the erasure detection
mechanism should be enabled or disabled in
the downstream fast channel."
DEFVAL { enable }
::= { zhoneVdslLineConfProfileEntry 70 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.71
zhoneVdslLineConfDownErasureDetectionInterleave OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the erasure detection
mechanism should be enabled or disabled in
the downstream slow channel (interleave)."
DEFVAL { enable }
::= { zhoneVdslLineConfProfileEntry 71 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.72
zhoneVdslLineConfUpErasureDetectionInterleave OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the erasure detection
mechanism should be enabled or disabled in
the uptream slow channel (interleave)."
DEFVAL { enable }
::= { zhoneVdslLineConfProfileEntry 72 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.73
zhoneVdslLineConfDownGhsA43TonePwr OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
auto(2),
manual(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines the mode of the downstream tones
power used during handshake, during A43
mode."
DEFVAL { default }
::= { zhoneVdslLineConfProfileEntry 73 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.74
zhoneVdslLineConfDownGhsB43TonePwr OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
auto(2),
manual(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines the mode of the downstream tones
power used during handshake, during B43
mode."
DEFVAL { default }
::= { zhoneVdslLineConfProfileEntry 74 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.75
zhoneVdslLineConfDownGhsA43cTonePwr OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
auto(2),
manual(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines the mode of the downstream tones
power used during handshake, during A43c
mode."
DEFVAL { default }
::= { zhoneVdslLineConfProfileEntry 75 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.76
zhoneVdslLineConfDownGhsV43TonePwr OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
auto(2),
manual(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines the mode of the downstream tone
power used during handshake, during V43
mode."
DEFVAL { default }
::= { zhoneVdslLineConfProfileEntry 76 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.77
zhoneVdslLineConfDownGhsA43TonePwrMaxLvl OBJECT-TYPE
SYNTAX Integer32 (-99..-40)
UNITS "0.5 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines the maximum power of downstream
tones used, in manual mode, during handshake
in A43 mode. A value of -99 indicates no
power used."
DEFVAL { -99 }
::= { zhoneVdslLineConfProfileEntry 77 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.78
zhoneVdslLineConfDownGhsB43TonePwrMaxLvl OBJECT-TYPE
SYNTAX Integer32 (-99..-40)
UNITS "0.5 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines the maximum power of downstream
tones used, in manual mode, during handshake
in B43 mode. A value of -99 indicates no
power used."
DEFVAL { -99 }
::= { zhoneVdslLineConfProfileEntry 78 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.79
zhoneVdslLineConfDownGhsA43cTonePwrMaxLvl OBJECT-TYPE
SYNTAX Integer32 (-99..-40)
UNITS "0.5 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines the maximum power of downstream
tones used, in manual mode, during handshake
in A43c mode. A value of -99 indicates no
power used."
DEFVAL { -99 }
::= { zhoneVdslLineConfProfileEntry 79 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.80
zhoneVdslLineConfDownGhsV43TonePwrMaxLvl OBJECT-TYPE
SYNTAX Integer32 (-99..-40)
UNITS "0.5 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines the maximum power of downstream
tones used, in manual mode, during handshake
in V43 mode. A value of -99 indicates no
power used."
DEFVAL { -99 }
::= { zhoneVdslLineConfProfileEntry 80 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.81
zhoneVdslLineConfDownRsCoding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Parameter to enable/disable RS Coding in
downstream channel."
DEFVAL { disable }
::= { zhoneVdslLineConfProfileEntry 81 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.82
zhoneVdslLineConfUpRsCoding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Parameter to enable/disable RS Coding in
upsream channel."
DEFVAL { disable }
::= { zhoneVdslLineConfProfileEntry 82 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.83
zhoneVdslLineConfUpPboPsdTemplate OBJECT-TYPE
SYNTAX INTEGER
{
ansi-a(1),
ansi-f(2),
etsi-a(3),
etsi-b(4),
etsi-c(5),
etsi-d(6),
etsi-e(7),
etsi-f(8),
custom(9),
ab-param(10)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum received PSD allowed
in the upstream channel on the VDSLx line."
DEFVAL { ansi-a }
::= { zhoneVdslLineConfProfileEntry 83 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.84
zhoneVdslLineConfUpPboPsdParamA1 OBJECT-TYPE
SYNTAX Integer32 (4000..8589)
UNITS ".01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Upstream power backoff PSD parameter A1. This
parameter is only used if the mask selection
is set to PSDMaskABParameters"
DEFVAL { 4000 }
::= { zhoneVdslLineConfProfileEntry 84 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.85
zhoneVdslLineConfUpPboPsdParamA2 OBJECT-TYPE
SYNTAX Integer32 (4000..8589)
UNITS ".01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Upstream power backoff PSD parameter A2. This
parameter is only used if the mask selection
is set to PSDMaskABParameters"
DEFVAL { 4000 }
::= { zhoneVdslLineConfProfileEntry 85 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.86
zhoneVdslLineConfUpPboPsdParamB1 OBJECT-TYPE
SYNTAX Integer32 (0..8589)
UNITS ".01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Upstream power backoff PSD parameter B1. This
parameter is only used if the mask selection
is set to PSDMaskABParameters"
DEFVAL { 4000 }
::= { zhoneVdslLineConfProfileEntry 86 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.87
zhoneVdslLineConfUpPboPsdParamB2 OBJECT-TYPE
SYNTAX Integer32 (0..8589)
UNITS ".01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Upstream power backoff PSD parameter B2. This
parameter is only used if the mask selection
is set to PSDMaskABParameters"
DEFVAL { 4000 }
::= { zhoneVdslLineConfProfileEntry 87 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.88
zhoneVdslLineConfDownDownshiftSnrMgn OBJECT-TYPE
SYNTAX Integer32 (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate."
DEFVAL { 30 }
::= { zhoneVdslLineConfProfileEntry 88 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.89
zhoneVdslLineConfDownUpshiftSnrMgn OBJECT-TYPE
SYNTAX Integer32 (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate."
DEFVAL { 90 }
::= { zhoneVdslLineConfProfileEntry 89 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.90
zhoneVdslLineConfDownMinDownshiftTime OBJECT-TYPE
SYNTAX Integer32 (0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs."
DEFVAL { 30 }
::= { zhoneVdslLineConfProfileEntry 90 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.91
zhoneVdslLineConfDownMinUpshiftTime OBJECT-TYPE
SYNTAX Integer32 (0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs."
DEFVAL { 30 }
::= { zhoneVdslLineConfProfileEntry 91 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.92
zhoneVdslLineConfUpDownshiftSnrMgn OBJECT-TYPE
SYNTAX Integer32 (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate."
DEFVAL { 30 }
::= { zhoneVdslLineConfProfileEntry 92 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.93
zhoneVdslLineConfUpUpshiftSnrMgn OBJECT-TYPE
SYNTAX Integer32 (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate."
DEFVAL { 90 }
::= { zhoneVdslLineConfProfileEntry 93 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.94
zhoneVdslLineConfUpMinDownshiftTime OBJECT-TYPE
SYNTAX Integer32 (0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs."
DEFVAL { 30 }
::= { zhoneVdslLineConfProfileEntry 94 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.95
zhoneVdslLineConfUpMinUpshiftTime OBJECT-TYPE
SYNTAX Integer32 (0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs."
DEFVAL { 30 }
::= { zhoneVdslLineConfProfileEntry 95 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.96
zhoneVdslLineConfDownMinTxThresholdAlarm OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum CO Tx Sync rate threshold alarm. If set to 0,
this field is disregarded. Otherwise, if Tx Sync
rate falls below this value, a trap and alarm will
be issued"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 96 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.97
zhoneVdslLineConfUpMinTxThresholdAlarm OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum CPE Tx Sync rate threshold alarm. If set to 0,
this field is disregarded. Otherwise, if Tx Sync
rate falls below this value, a trap and alarm will
be issued"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 97 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.98
zhoneVdslLineConfPotsBypassRelayMaxDuration OBJECT-TYPE
SYNTAX INTEGER (1..300)
UNITS "secs"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum duration in seconds that an Adsl Pots Low
Pass Filter Bypass Relay will remain active (meaning
closed/energized). As a fail-safe mechanism, the relay
will automatically return a line back to normal
operational mode when this timer has expired.
This object is only valid for Adsl Pots Splitter
cards containing the Pots LPF Bypass Relays."
DEFVAL { 60 }
::= { zhoneVdslLineConfProfileEntry 98 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.99
zhoneVdslLineConfDMTConfMode OBJECT-TYPE
SYNTAX INTEGER
{
echocancel(1),
freqdivmux(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Discrete Multi-Tone parameter that selects whether there
is overlap (echoCancel) or no overlap (freqDivMux) of bins."
DEFVAL { freqdivmux }
::= { zhoneVdslLineConfProfileEntry 99 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.100
zhoneVdslLineConfDownBitSwap OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
enabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable downstream bit swap."
DEFVAL { enabled }
::= { zhoneVdslLineConfProfileEntry 100 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.101
zhoneVdslLineConfUpBitSwap OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
enabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable upstream bit swap."
DEFVAL { enabled }
::= { zhoneVdslLineConfProfileEntry 101 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.102
zhoneVdslLineConfAdslAnnexMModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether Annex-M mode is enabled
on the Adsl modem. If this object is set to 'true' then
Annex-M mode is enabled. If it is set to 'false then
Annex-M mode is disabled."
DEFVAL { false }
::= { zhoneVdslLineConfProfileEntry 102 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.103
zhoneVdslLineConfAdslAnnexMPsdMask OBJECT-TYPE
SYNTAX INTEGER
{
eu64(1),
eu60(2),
eu56(3),
eu52(4),
eu48(5),
eu44(6),
eu40(7),
eu36(8),
eu32(9),
all(10)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the maximum transmit PSD
allowed in the downstream channel on an BIS
Annex-M line."
DEFVAL { eu32 }
::= { zhoneVdslLineConfProfileEntry 103 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.104
zhoneVdslLineConfUs0BoundaryTone OBJECT-TYPE
SYNTAX INTEGER
{
d32(1),
d36(2),
d40(3),
d44(4),
d48(5),
d52(6),
d56(7),
d64(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the upper boundary of US0.
US0 is used in long reach mode when there is no more
capacity in US1. The switchover is typically around
3500 feet."
DEFVAL { d32 }
::= { zhoneVdslLineConfProfileEntry 104 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.105
zhoneVdslLineConfDownInp OBJECT-TYPE
SYNTAX INTEGER
{
noProtection(1),
halfSymbol(2),
singleSymbol(3),
twoSymbols(4),
threeSymbols(5),
fourSymbols(6),
fiveSymbols(7),
sixSymbols(8),
sevenSymbols(9),
eightSymbols(10),
nineSymbols(11),
tenSymbols(12),
elevenSymbols(13),
twelveSymbols(14),
thirteenSymbols(15),
fourteenSymbols(16),
fifteenSymbols(17),
sixteenSymbols(18)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum impulse noise protection for the downstream
bearer channel expressed in symbols. One symbol equals
250 uS."
DEFVAL { twoSymbols }
::= { zhoneVdslLineConfProfileEntry 105 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.106
zhoneVdslLineConfUpInp OBJECT-TYPE
SYNTAX INTEGER
{
noProtection(1),
halfSymbol(2),
singleSymbol(3),
twoSymbols(4),
fourSymbols(5),
eightSymbols(6),
sixteenSymbols(7),
threeSymbols(8),
fiveSymbols(9),
sixSymbols(10),
sevenSymbols(11),
nineSymbols(12),
tenSymbols(13),
elevenSymbols(14),
twelveSymbols(15),
thirteenSymbols(16),
fourteenSymbols(17),
fifteenSymbols(18)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum impulse noise protection for the upstream
bearer channel expressed in symbols. One symbol equals
250 uS."
DEFVAL { twoSymbols }
::= { zhoneVdslLineConfProfileEntry 106 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.107
zhoneVdslLineConfDownMaxInterleavingDelay OBJECT-TYPE
SYNTAX INTEGER (0..63)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum inteleaving delay in the downstream direction.
A value of zero indicates no delay introduced."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 107 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.108
zhoneVdslLineConfUpMaxInterleavingDelay OBJECT-TYPE
SYNTAX INTEGER (0..63)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum inteleaving delay in the upstream direction.
A value of zero indicates no delay introduced."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 108 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.109
zhoneVdslLineConfDownPsdMaskEnable OBJECT-TYPE
SYNTAX INTEGER
{
standard(2),
mod(3),
modFallback(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object selects the Psd Mask in the downstream direction.
'standard' : use the PSD Mask specified in the object
zhoneVdslLineConfDownPsdSelect
'mod' : use the pre-defined Mask-On-Demand PSD Mask
'modFallback': use the pre-defined Mask-On-Demand PSD
Mask with fallback"
DEFVAL { standard }
::= { zhoneVdslLineConfProfileEntry 109 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.110
zhoneVdslLineConfUpPsdMaskEnable OBJECT-TYPE
SYNTAX INTEGER
{
standard(2),
mod(3),
modFallback(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object selects the Psd Mask in the upstream direction.
'standard' : use the PSD Mask specified in the object
zhoneVdslLineConfDownPsdSelect
'mod' : use the pre-defined Mask-On-Demand PSD Mask
'modFallback': use the pre-defined Mask-On-Demand PSD
Mask with fallback"
DEFVAL { standard }
::= { zhoneVdslLineConfProfileEntry 110 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.111
zhoneVdslLineConfDownPsdMaskSelect OBJECT-TYPE
SYNTAX INTEGER
{
custom(1),
customMOD(2),
dmtPSDCOMSK2(3),
dmtPSDFLATMSK(4),
dmtPSDCABMSK2(5),
dmtPSDCOMSK2RFI(6),
dmtPSDFLATMSKRFI(7),
dmtPSDCABMSK2RFI(8),
dmtPSDADSL2NONOVLPM1(9),
dmtPSDADSL2NONOVLPM2(10),
dmtPSDADSL2NONOVLPFLAT(11),
g993RegionC(12),
g993RegionA(13),
g993RegionA-E17a-D-32(14),
g993RegionA-E17a-D-48(15),
g993RegionA-E17a-D-64(16),
g993RegionA-E17a-D-128(17),
g998RegionB-M1x-A(18),
g998RegionB-M1x-B(19),
g998RegionB-M1x-NUS0(20),
g998RegionB-M2x-A(21),
g998RegionB-M2x-M(22),
g998RegionB-M2x-B(23),
g998RegionB-M2x-NUS0(24),
g998RegionB-E17-M2x-NUS0(25),
g998RegionB-E17-M2x-NUS0-M(26),
g998RegionB-ADE17-M2x-NUS0-M(27),
g998RegionB-ADE17-M2x-A(28),
g998RegionB-ADE17-M2x-B(29),
g998RegionB-E30-M2x-NUS0(30),
g998RegionB-E30-M2x-NUS0-M(31),
g998RegionB-ADE30-M2x-NUS0-M(32),
g998RegionB-ADE30-M2x-NUS0-A(33),
g998RegionB-NONSTD-E17-M2x(34),
g998RegionB-NONSTD-E17-M2x-M(35),
g997RegionB-M1c-A-7(36),
g997RegionB-M1x-M-8(37),
g997RegionB-M1x-M(38),
g997RegionB-M2x-M-8(39),
g997RegionB-M2x-A(40),
g997RegionB-M2x-M(41),
g997RegionB-HPE17-M1-NUS0(42),
g997RegionB-HPE30-M1-NUS0(43),
g997RegionB-E17-M2x-A(44),
g997RegionB-E30-M2x-NUS0(45)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object selects one of the standards based PSD mask for the
downstream direction. The object zhoneVdslLineConfDownPsdMaskEnable
must be set to 'standard' for this object to be active."
DEFVAL { g993RegionA }
::= { zhoneVdslLineConfProfileEntry 111 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.112
zhoneVdslLineConfUpPsdMaskSelect OBJECT-TYPE
SYNTAX INTEGER
{
custom(1),
g993J-ADLU-32(2),
g993J-ADLU-36(3),
g993J-ADLU-40(4),
g993J-ADLU-44(5),
g993J-ADLU-48(6),
g993J-ADLU-52(7),
g993J-ADLU-60(8),
g993J-ADLU-64(9),
g993JM-EU-32(10),
g993JM-EU-36(11),
g993JM-EU-40(12),
g993JM-EU-44(13),
g993JM-EU-48(14),
g993JM-EU-52(15),
g993JM-EU-60(16),
g993JM-EU-64(17),
dmtExtended(18),
dmtJJ100(19),
dmtStandard(20),
g993RegionA-EU-32(21),
g993RegionA-EU-36(22),
g993RegionA-EU-40(23),
g993RegionA-EU-44(24),
g993RegionA-EU-48(25),
g993RegionA-EU-52(26),
g993RegionA-EU-56(27),
g993RegionA-EU-60(28),
g993RegionA-EU-64(29),
g998RegionB-M1x-A(30),
g998RegionB-M1x-B(31),
g998RegionB-M1x-NUS0(32),
g998RegionB-M2x-A(33),
g998RegionB-M2x-M(34),
g998RegionB-M2x-B(35),
g998RegionB-M2x-NUS0(36),
g998RegionB-E17-M2x-NUS0(37),
g998RegionB-E17-M2x-NUS0-M(38),
g998RegionB-ADE17-M2x-NUS0-M(39),
g998RegionB-ADE17-M2x-A(40),
g998RegionB-ADE17-M2x-B(41),
g998RegionB-E30-M2x-NUS0(42),
g998RegionB-E30-M2x-NUS0-M(43),
g998RegionB-ADE30-M2x-NUS0-M(44),
g998RegionB-ADE30-M2x-NUS0-A(45),
g998RegionB-NONSTD-E17-M2x(46),
g998RegionB-NONSTD-E17-M2x-M(47),
g997RegionB-M1c-A-7(48),
g997RegionB-M1x-M-8(49),
g997RegionB-M1x-M(50),
g997RegionB-M2x-M-8(51),
g997RegionB-M2x-A(52),
g997RegionB-M2x-M(53),
g997RegionB-HPE17-M1-NUS0(54),
g997RegionB-HPE30-M1-NUS0(55),
g997RegionB-E17-M2x-A(56),
g997RegionB-E30-M2x-NUS0(57)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object selects one of the standards based PSD mask for the
upstream direction. The object zhoneVdslLineConfUpPsdMaskEnable
must be set to 'standard' for this object to be active."
DEFVAL { g993RegionA-EU-32 }
::= { zhoneVdslLineConfProfileEntry 112 }
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.113
zhoneVdslLineEnableTrellisCoding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables/disables Trellis coding."
DEFVAL { true }
::= { zhoneVdslLineConfProfileEntry 113 }
--
--
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.114
zhoneVdslLineEnableRsCoding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables/disables Rs coding."
DEFVAL { true }
::= { zhoneVdslLineConfProfileEntry 114 }
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.115
zhoneVdslLineConfPsdShape OBJECT-TYPE
SYNTAX INTEGER
{
region-a-nus0(1),
region-a-eu-32(2),
region-a-eu-36(3),
region-a-eu-40(4),
region-a-eu-44(5),
region-a-eu-48(6),
region-a-eu-52(7),
region-a-eu-56(8),
region-a-eu-60(9),
region-a-eu-64(10),
region-a-eu-128(11),
region-a-adlu-32(12),
region-a-adlu-36(13),
region-a-adlu-40(14),
region-a-adlu-44(15),
region-a-adlu-48(16),
region-a-adlu-52(17),
region-a-adlu-56(18),
region-a-adlu-60(19),
region-a-adlu-64(20),
region-a-adlu-128(21),
region-b-998-m1x-a(22),
region-b-998-m1x-b(23),
region-b-998-m1x-nus0(24),
region-b-998-m2x-a(25),
region-b-998-m2x-m(26),
region-b-998-m2x-b(27),
region-b-998-m2x-nus0(28),
region-b-998-e17-m2x-nus0(29),
region-b-998-e17-m2x-nus0-m(30),
region-b-998-ade17-m2x-nus0-m(31),
region-b-998-ade17-m2x-a(32),
region-b-998-ade17-m2x-b(33),
region-b-998-e30-m2x-nus0(34),
region-b-998-e30-m2x-nus0-m(35),
region-b-998-ade30-m2x-nus0-m(36),
region-b-998-ade30-m2x-nus0-a(37),
region-b-997-m1c-a-7(38),
region-b-997-m1x-m-8(39),
region-b-997-m1x-m(40),
region-b-997-m2x-m-8(41),
region-b-997-m2x-a(42),
region-b-997-m2x-m(43),
region-b-997-hpe17-m1-nus0(44),
region-b-997-hpe30-m1-nus0(45),
region-b-997-e17-m2x-a(46),
region-b-997-e30-m2x-nus0(47),
region-b-997-bt-anfp(48),
region-c-138-b(49),
region-c-276-b(50),
region-c-138-co(51),
region-c-276-co(52),
region-c-tcmisdn(53),
region-c-1104-co-17a(54),
region-c-1104-co-30a(55)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum transmit PSD allowed on a VDSL2 line."
DEFVAL { region-a-eu-32 }
::= { zhoneVdslLineConfProfileEntry 115 }
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.116
zhoneVdslLineConfDownPhyRSupport OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable downstream PHYR.
Only supported by Broadcom PHYR ports."
DEFVAL { enable }
::= { zhoneVdslLineConfProfileEntry 116 }
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.117
zhoneVdslLineConfUpPhyRSupport OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable upstream PHYR.
Only supported by Broadcom PHYR ports."
DEFVAL { enable }
::= { zhoneVdslLineConfProfileEntry 117 }
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.118
zhoneVdslLineConfDownPhyRmaxINP OBJECT-TYPE
SYNTAX INTEGER (0 | 5..160)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"PHYR maximum downstream impulse noise protection.
A value of 0 specifies no protection.
The values 5 through 160 specify the number of
symbols in 1/10 increments.
Only supported by Broadcom PHYR ports."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 118 }
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.119
zhoneVdslLineConfUpPhyRmaxINP OBJECT-TYPE
SYNTAX INTEGER (0 | 5..160)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"PHYR maximum upstream impulse noise protection.
A value of 0 specifies no protection.
The values 5 through 160 specify the number of
symbols in 1/10 increments.
Only supported by Broadcom PHYR ports."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 119 }
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.120
zhoneVdslLineConfDownPhyRminRSoverhead OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"PHYR minimum downstream RS overhead.
Only supported by Broadcom PHYR ports."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 120 }
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.121
zhoneVdslLineConfUpPhyRminRSoverhead OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"PHYR minimum upstream RS overhead.
Only supported by Broadcom PHYR ports."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 121 }
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.122
zhoneVdslLineConfDownPhyRRtxRatio OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"PHYR minimum downstream fraction of the
line rate allocated for retransmission.
Only supported by Broadcom PHYR ports."
::= { zhoneVdslLineConfProfileEntry 122 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.123
zhoneVdslLineConfUpPhyRRtxRatio OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"PHYR minimum upstream fraction of the
line rate allocated for retransmission.
Only supported by Broadcom PHYR ports."
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 123 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.124
zhoneVdslLineConfUpPboPsdParamA3 OBJECT-TYPE
SYNTAX Integer32 (4000..8096)
UNITS ".01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Upstream power backoff PSD parameter A3. This
parameter is only used if the mask selection
is set to PSDMaskABParameters"
DEFVAL { 4000 }
::= { zhoneVdslLineConfProfileEntry 124 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.125
zhoneVdslLineConfUpPboPsdParamA4 OBJECT-TYPE
SYNTAX Integer32 (4000..8096)
UNITS ".01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Upstream power backoff PSD parameter A4. This
parameter is only used if the mask selection
is set to PSDMaskABParameters"
DEFVAL { 4000 }
::= { zhoneVdslLineConfProfileEntry 125 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.126
zhoneVdslLineConfUpPboPsdParamB3 OBJECT-TYPE
SYNTAX Integer32 (0..4096)
UNITS ".01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Upstream power backoff PSD parameter B3. This
parameter is only used if the mask selection
is set to PSDMaskABParameters"
DEFVAL { 4000 }
::= { zhoneVdslLineConfProfileEntry 126 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.127
zhoneVdslLineConfUpPboPsdParamB4 OBJECT-TYPE
SYNTAX Integer32 (0..4096)
UNITS ".01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Upstream power backoff PSD parameter B4. This
parameter is only used if the mask selection
is set to PSDMaskABParameters"
DEFVAL { 4000 }
::= { zhoneVdslLineConfProfileEntry 127 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.128
zhoneVdslLineConfFallbackDefaultVpi OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ATM VPI to be used by the line when it trains
in ADSL/ATM mode and bridges are configured for
single-vc mode"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 128 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.129
zhoneVdslLineConfFallbackDefaultVci OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ATM VCI to be used by the line when it trains
in ADSL/ATM mode and bridges are configured for
single-vc mode"
DEFVAL { 35 }
::= { zhoneVdslLineConfProfileEntry 129 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.130
zhoneVdslLineConfDownGinpSupport OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable downstream G.INP / ITU-G.998.4.
Only supported by Broadcom ports."
REFERENCE
"ITU-G.998.4"
DEFVAL { disable }
::= { zhoneVdslLineConfProfileEntry 130 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.131
zhoneVdslLineConfUpGinpSupport OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable upstream G.INP / ITU-G.998.4.
Only supported by Broadcom ports."
DEFVAL { disable }
::= { zhoneVdslLineConfProfileEntry 131 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.132
zhoneVdslLineConfDownGinpEtrMax OBJECT-TYPE
SYNTAX Unsigned32 (64..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpEtrMax - Maximum allowed value for downstream expected throughput
(ETR) in kbit/s. The valid values are all multiples of 8 from 0 to
the maximum of the valid values of the maximum net data rate
specified in the associated Recommendation. ITU-T G.998.4 7.1.1
Control parameters and 7.1.2 Valid configurations.
"
REFERENCE
"ITU-G.998.4"
DEFVAL { 100000 }
::= { zhoneVdslLineConfProfileEntry 132 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.133
zhoneVdslLineConfUpGinpEtrMax OBJECT-TYPE
SYNTAX Unsigned32 (64..2000000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpEtrMax - Maximum allowed value for upstream expected throughput
(ETR) in kbit/s. The valid values are all multiples of 8 from 0 to
the maximum of the valid values of the maximum net data rate
specified in the associated Recommendation. ITU-T G.998.4 7.1.1
Control parameters and 7.1.2 Valid configurations."
REFERENCE
"ITU-G.998.4"
DEFVAL { 60000 }
::= { zhoneVdslLineConfProfileEntry 133 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.134
zhoneVdslLineConfDownGinpEtrMin OBJECT-TYPE
SYNTAX Unsigned32 (64..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpEtrMin - Minimum allowed value for downstream expected throughput
(ETR) in kbit/s. The valid values are all multiples of 8 from 0 to
the maximum of the valid values of the minimum net data rate specified
in the associated Recommendation. ITU-T G.998.4 7.1.1 Control parameters
and 7.1.2 Valid configurations."
REFERENCE
"ITU-G.998.4"
DEFVAL { 64 }
::= { zhoneVdslLineConfProfileEntry 134 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.135
zhoneVdslLineConfUpGinpEtrMin OBJECT-TYPE
SYNTAX Unsigned32 (64..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpEtrMin - Minimum allowed value for upstream expected throughput
(ETR) in kbit/s. The valid values are all multiples of 8 from 0 to
the maximum of the valid values of the minimum net data rate specified
in the associated Recommendation. ITU-T G.998.4 7.1.1 Control parameters
and 7.1.2 Valid configurations."
REFERENCE
"ITU-G.998.4"
DEFVAL { 64 }
::= { zhoneVdslLineConfProfileEntry 135 }
--
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.136
zhoneVdslLineConfDownGinpNdrMax OBJECT-TYPE
SYNTAX Unsigned32 (64..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpNdrMax - Maximum allowed value for downstream net data rate (NDR)
in kbit/s. The valid values are all multiples of 8 from 0 to the
maximum of the valid values of the maximum net data rate specified
in the associated Recommendation. ITU-T G.998.4 7.1.1 Control parameters
and 7.1.2 Valid configurations."
REFERENCE
"ITU-G.998.4"
DEFVAL { 100000 }
::= { zhoneVdslLineConfProfileEntry 136 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.137
zhoneVdslLineConfUpGinpNdrMax OBJECT-TYPE
SYNTAX Unsigned32 (64..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpNdrMax - Maximum allowed value for upstream net data rate (NDR)
in kbit/s. The valid values are all multiples of 8 from 0 to the
maximum of the valid values of the maximum net data rate specified
in the associated Recommendation. ITU-T G.998.4 7.1.1 Control parameters
and 7.1.2 Valid configurations."
REFERENCE
"ITU-G.998.4"
DEFVAL { 60000 }
::= { zhoneVdslLineConfProfileEntry 137 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.138
zhoneVdslLineConfDownGinpShineRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "ratio"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpShineRatio - The downstream loss of rate in a 1 second interval
expressed as a fraction of NDR due to a single high impulse noise
event (SHINE) impulse noise environment expected by the operator
to occur at a probability acceptable for the services. The valid
values are all multiples of 0.001 from 0 to 0.1. This field uses
1 to equal 0.001 and 100 to equal 0.1. ITU-T G.998.4 7.1.1 Control
parameters and 7.1.2 Valid configurations."
REFERENCE
"ITU-G.998.4"
DEFVAL { 10 }
::= { zhoneVdslLineConfProfileEntry 138 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.139
zhoneVdslLineConfUpGinpShineRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "ratio"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpShineRatio - The upstream loss of rate in a 1 second interval
expressed as a fraction of NDR due to a single high impulse noise
event (SHINE) impulse noise environment expected by the operator
to occur at a probability acceptable for the services. The valid
values are all multiples of 0.001 from 0 to 0.1. This field uses
1 to equal 0.001 and 100 to equal 0.1. ITU-T G.998.4 7.1.1 Control
parameters and 7.1.2 Valid configurations."
REFERENCE
"ITU-G.998.4"
DEFVAL { 10 }
::= { zhoneVdslLineConfProfileEntry 139 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.140
zhoneVdslLineConfDownGinpLeftrThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
UNITS "ratio"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpLeftrThreshold - The downstream rate Threshold below which the
Low Error Free Rate (LEFTR) defect is declared. The threshold used
to declare leftr defects is expressed in fraction of the net data
rate (NDR). The value 0 is a special value to indicate that the
receiver shall use a special value for declaring leftr defect.
The minimum valid threshold to declare leftr is ETR/2. The receiver
shall ignore threshold values that are less than the minimum and shall
use ETR/2 for declaring leftr defect instead. The valid values are
all multiples of 0.01 from 0.01 to 0.99. This field uses 1 to equal
0.01 and 99 to equal 0.99."
REFERENCE
"ITU-G.998.4"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 140 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.141
zhoneVdslLineConfUpGinpLeftrThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
UNITS "ratio"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpLeftrThreshold - The upstream rate Threshold below which the
Low Error Free Rate (LEFTR) defect is declared. The threshold used
to declare leftr defects is expressed in fraction of the net data
rate (NDR). The value 0 is a special value to indicate that the
receiver shall use a special value for declaring leftr defect.
The minimum valid threshold to declare leftr is ETR/2. The receiver
shall ignore threshold values that are less than the minimum and shall
use ETR/2 for declaring leftr defect instead. The valid values are
all multiples of 0.01 from 0.01 to 0.99. This field uses 1 to equal
0.01 and 99 to equal 0.99."
REFERENCE
"ITU-G.998.4"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 141 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.142
zhoneVdslLineConfDownGinpMaxDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
UNITS "mSecs"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpMaxDelay - The maximum downstream delay in ms. This is the upper
limit for the delay that is added to the transmission delay only caused
by retransmissions. Here the receiver and/or the transmitter shall
identify and discard all DTUs whose payload cannot be transferred over
the reference point at the receiver without violating the delay_max
limit. The time stamp shall be the criterion for discarding the DTUs.
The processing delay between the U-interface and the retransmission
sub-layer of the receiver in the retransmission data path direction
shall be excluded from consideration for delay_max in the retransmission
data path direction. The valid values are all integers from 1 to 63.
ITU-T G.998.4 7.1.1 Control parameters, 7.1.2 Valid configurations, and
8.1.6 Time Stamp."
REFERENCE
"ITU-G.998.4"
DEFVAL { 20 }
::= { zhoneVdslLineConfProfileEntry 142 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.143
zhoneVdslLineConfUpGinpMaxDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
UNITS "mSecs"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpMaxDelay - The maximum upstream delay in ms. This is the upper
limit for the delay that is added to the transmission delay only caused
by retransmissions. Here the receiver and/or the transmitter shall
identify and discard all DTUs whose payload cannot be transferred over
the reference point at the receiver without violating the delay_max
limit. The time stamp shall be the criterion for discarding the DTUs.
The processing delay between the U-interface and the retransmission
sub-layer of the receiver in the retransmission data path direction
shall be excluded from consideration for delay_max in the retransmission
data path direction. The valid values are all integers from 1 to 63.
ITU-T G.998.4 7.1.1 Control parameters, 7.1.2 Valid configurations, and
8.1.6 Time Stamp."
REFERENCE
"ITU-G.998.4"
DEFVAL { 20 }
::= { zhoneVdslLineConfProfileEntry 143 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.144
zhoneVdslLineConfDownGinpMinDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
UNITS "mSecs"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpMinDelay - The minimum downstream delay in ms. This is the lower
limit for the delay that is added to the transmission delay caused by
retransmissions only. The time stamp shall be used by the outlet shaping
function to determine when the payload of the DTU shall be sent to the
reference point to meet the delay limits. The outlet shaping function
shall minimize the additional delay that may be introduced above delay_
min , and shall never exceed delay_max. The valid values are all integers
from 0 to 63. ITU-T G.998.4 7.1.1 Control parameters, 7.1.2 Valid
configurations, and 8.1.6 Time Stamp."
REFERENCE
"ITU-G.998.4"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 144 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.145
zhoneVdslLineConfUpGinpMinDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
UNITS "mSecs"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpMinDelay - The minimum upstream delay in ms. This is the lower
limit for the delay that is added to the transmission delay caused by
retransmissions only. The time stamp shall be used by the outlet shaping
function to determine when the payload of the DTU shall be sent to the
reference point to meet the delay limits. The outlet shaping function
shall minimize the additional delay that may be introduced above delay_
min , and shall never exceed delay_max. The valid values are all integers
from 0 to 63. ITU-T G.998.4 7.1.1 Control parameters, 7.1.2 Valid
configurations, and 8.1.6 Time Stamp."
REFERENCE
"ITU-G.998.4"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 145 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.146
zhoneVdslLineConfDownGinpMin OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ginpMin - The minimum downstream impulse noise protection (INP) against
single high impulse noise event (SHINE) in discrete multitone (DMT)
symbols. The valid values are all integers from 0 to 63 for system with
a sub-carrier spacing of 4.3125 kHz. The valid values are all integers
from 0 to 127 for system with a sub-carrier spacing of 8.625 kHz. ITU-T
G.998.4 7.1.1 Control parameters and 7.1.2 Valid configurations."
REFERENCE
"ITU-G.998.4"
DEFVAL { 4 }
::= { zhoneVdslLineConfProfileEntry 146 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.147
zhoneVdslLineConfUpGinpMin OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ginpMin - The minimum upstream impulse noise protection (INP) against
single high impulse noise event (SHINE) in discrete multitone (DMT)
symbols. The valid values are all integers from 0 to 63 for system with
a sub-carrier spacing of 4.3125 kHz. The valid values are all integers
from 0 to 127 for system with a sub-carrier spacing of 8.625 kHz. ITU-T
G.998.4 7.1.1 Control parameters and 7.1.2 Valid configurations."
REFERENCE
"ITU-G.998.4"
DEFVAL { 4 }
::= { zhoneVdslLineConfProfileEntry 147 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.148
zhoneVdslLineConfDownGinpMinRSoverhead OBJECT-TYPE
SYNTAX Unsigned32 (0..64)
UNITS "ratio"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpMinRSoverhead - This value specifies the downstream bandwidth
reserved for RS (reed-solomon) codewords. The minimum guaranteed R/N
ratio. The unit is 1/256th and the range is 0..64 (0 to 25%)."
REFERENCE
"ITU-G.998.4"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 148 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.149
zhoneVdslLineConfUpGinpMinRSoverhead OBJECT-TYPE
SYNTAX Unsigned32 (0..64)
UNITS "ratio"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpMinRSoverhead - This value specifies the upstream bandwidth
reserved for RS (reed-solomon) codewords. The minimum guaranteed R/N
ratio. The unit is 1/256th and the range is 0..64 (0 to 25%)."
REFERENCE
"ITU-G.998.4"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 149 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.150
zhoneVdslLineConfDownGinpReinCfg OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpReinCfg - The minimum downstream impulse protection against
electrical repetitive impulse noise (REIN) in DMT symbols. The valid
values are all integers from 0 to 7 for system with a sub-carrier
spacing of 4.3125 kHz. The valid values are all integers from 0 to 13
for system with a sub-carrier spacing of 8.625 kHz. ITU-T G.998.4 7.1.1
Control parameters and 7.1.2 Valid configurations."
REFERENCE
"ITU-G.998.4"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 150 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.151
zhoneVdslLineConfUpGinpReinCfg OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpReinCfg - The minimum upstream impulse protection against
electrical repetitive impulse noise (REIN) in DMT symbols. The valid
values are all integers from 0 to 7 for system with a sub-carrier
spacing of 4.3125 kHz. The valid values are all integers from 0 to 13
for system with a sub-carrier spacing of 8.625 kHz. ITU-T G.998.4 7.1.1
Control parameters and 7.1.2 Valid configurations."
REFERENCE
"ITU-G.998.4"
DEFVAL { 0 }
::= { zhoneVdslLineConfProfileEntry 151 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.152
zhoneVdslLineConfDownGinpReinFreq OBJECT-TYPE
SYNTAX INTEGER
{
freq100hz(1),
freq120hz(2)
}
UNITS "Hz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ginpReinFreq specifies the frequency of REIN inter-arrival time. It is used
in the Channel Initialization Policy and on-line reconfiguration procedures.
REIN is commonly coupled from electrical power cables appliances drawing
power from the AC electrical power network, having a repetition rate of
twice the AC power frequency (100 or 120 Hz). The valid values are integers
100 hz or 120 hz. ITU-T G.998.4 7.1.1 Control parameters and 7.1.2 Valid
configurations."
DEFVAL { freq120hz }
::= { zhoneVdslLineConfProfileEntry 152 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.153
zhoneVdslLineConfUpGinpReinFreq OBJECT-TYPE
SYNTAX INTEGER
{
freq100hz(1),
freq120hz(2)
}
UNITS "Hz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ginpReinFreq specifies the frequency of REIN inter-arrival time. It is used
in the Channel Initialization Policy and on-line reconfiguration procedures.
REIN is commonly coupled from electrical power cables appliances drawing
power from the AC electrical power network, having a repetition rate of
twice the AC power frequency (100 or 120 Hz). The valid values are integers
100 hz or 120 hz. ITU-T G.998.4 7.1.1 Control parameters and 7.1.2 Valid
configurations."
DEFVAL { freq120hz }
::= { zhoneVdslLineConfProfileEntry 153 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.154
zhoneVdslLineConfDownGinpRtxMode OBJECT-TYPE
SYNTAX INTEGER
{
forbidden(1),
preferred(2),
forced(3),
testmode(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpRtxMode - Downstream retransmission Mode (RTX MODE). The RTX_MODE
is a configuration parameter used to control activation of retransmission
during initialization. This parameter has 4 valid values:
FORBIDDEN: ITU-T G.998.4 retransmission not allowed.
PREFERRED: ITU-T G.998.4 retransmission is preferred by the operator.
(i.e., if ITU-T G.998.4 RTX capability is supported by both XTU's,
the XTU's shall select ITU-T G.998.4 operation for this direction).
FORCED: Force the use of the ITU-T G.998.4 retransmission.
(i.e., if ITU-T G.998.4 RTX capability in this direction is not
supported by both XTU's or not selected by the XTU's, an
initialization failure shall result).
NOTE: Due to the optionality of ITU-T G.998.4 retransmission in
upstream direction, the use of FORCED in upstream may lead to
initialization failure, even if the XTU is supporting ITU-T G.998.4
(in downstream).
TESTMODE: Force the use of the ITU-T G.998.4 retransmission in the
test mode described in clause 10.4. (i.e., if ITU-T G.998.4 RTX
capability is not supported by both XTU's or not selected by the
XTU's, an initialization failure shall result).
ITU-T G.998.4 11.1.13 Retransmission Mode (RTX_MODE)
"
REFERENCE
"ITU-G.998.4"
DEFVAL { preferred }
::= { zhoneVdslLineConfProfileEntry 154 }
-- 1.3.6.1.4.1.5504.5.13.1.1.11.1.155
zhoneVdslLineConfUpGinpRtxMode OBJECT-TYPE
SYNTAX INTEGER
{
forbidden(1),
preferred(2),
forced(3),
testmode(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gInpRtxMode - Upstream retransmission Mode (RTX MODE). The RTX_MODE
is a configuration parameter used to control activation of retransmission
during initialization. This parameter has 4 valid values:
FORBIDDEN: ITU-T G.998.4 retransmission not allowed.
PREFERRED: ITU-T G.998.4 retransmission is preferred by the operator.
(i.e., if ITU-T G.998.4 RTX capability is supported by both XTU's,
the XTU's shall select ITU-T G.998.4 operation for this direction).
FORCED: Force the use of the ITU-T G.998.4 retransmission.
(i.e., if ITU-T G.998.4 RTX capability in this direction is not
supported by both XTU's or not selected by the XTU's, an
initialization failure shall result).
NOTE: Due to the optionality of ITU-T G.998.4 retransmission in
upstream direction, the use of FORCED in upstream may lead to
initialization failure, even if the XTU is supporting ITU-T G.998.4
(in downstream).
TESTMODE: Force the use of the ITU-T G.998.4 retransmission in the
test mode described in clause 10.4. (i.e., if ITU-T G.998.4 RTX
capability is not supported by both XTU's or not selected by the
XTU's, an initialization failure shall result).
ITU-T G.998.4 11.1.13 Retransmission Mode (RTX_MODE)"
REFERENCE
"ITU-G.998.4"
DEFVAL { preferred }
::= { zhoneVdslLineConfProfileEntry 155 }
-- Alarm configuration profile table
--
-- 1.3.6.1.4.1.5504.5.13.1.1.20
-- 1.3.6.1.4.1.5504.5.13.1.1.20
zhoneVdslLineAlarmConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslLineAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on the VDSL line alarm
configuration. One entry in this table reflects a profile
defined by a manager which can be used to configure the
VDSL line alarm thresholds.
Entries in this table MUST be maintained in a
persistent manner."
::= { zhoneVdslMibObjects 20 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1
zhoneVdslLineAlarmConfProfileEntry OBJECT-TYPE
SYNTAX ZhoneVdslLineAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry consists of a list of parameters that
represents the configuration of a VDSL line alarm
profile.
A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this
document."
INDEX { ifIndex }
::= { zhoneVdslLineAlarmConfProfileTable 1 }
ZhoneVdslLineAlarmConfProfileEntry ::=
SEQUENCE {
zhoneVdslLineAlarmConfProfileName
SnmpAdminString,
zhoneVdslLineAlarmConfThresh15MinLofs
INTEGER,
zhoneVdslLineAlarmConfThresh15MinLoss
INTEGER,
zhoneVdslLineAlarmConfThresh15MinLprs
INTEGER,
zhoneVdslLineAlarmConfThresh15MinLols
INTEGER,
zhoneVdslLineAlarmConfThresh15MinESs
INTEGER,
zhoneVdslLineAlarmConfThresh15MinSESs
INTEGER,
zhoneVdslLineAlarmConfThresh15MinUASs
INTEGER,
zhoneVdslLineAlarmConfInitFailure
TruthValue,
zhoneVdslLineAlarmConfProfRowStatus
RowStatus,
zhoneVdslLineAlarmConfThresh1DayLofs
INTEGER,
zhoneVdslLineAlarmConfThresh1DayLoss
INTEGER,
zhoneVdslLineAlarmConfThresh1DayLprs
INTEGER,
zhoneVdslLineAlarmConfThresh1DayLols
INTEGER,
zhoneVdslLineAlarmConfThresh1DayESs
INTEGER,
zhoneVdslLineAlarmConfThresh1DaySESs
INTEGER,
zhoneVdslLineAlarmConfThresh1DayUASs
INTEGER,
zhoneVdslLineAlarmConfThresh1DayInitFailure
TruthValue
}
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.1
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.1
zhoneVdslLineAlarmConfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name for this profile as specified by an
administrator."
::= { zhoneVdslLineAlarmConfProfileEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.2
zhoneVdslLineAlarmConfThresh15MinLofs OBJECT-TYPE
SYNTAX INTEGER (0..900)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of
loss of frame seconds (LOFs) within any given 15-minute
performance data collection interval. If the value of
loss of frame seconds in a particular 15-minute collection
interval reaches/exceeds this value, a
zhoneVdslPerfLofsThreshNotification notification will be
generated. No more than one notification will be sent
per interval."
::= { zhoneVdslLineAlarmConfProfileEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.3
zhoneVdslLineAlarmConfThresh15MinLoss OBJECT-TYPE
SYNTAX INTEGER (0..900)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of
loss of signal seconds (LOSs) within any given 15-minute
performance data collection interval. If the value of
loss of signal seconds in a particular 15-minute
collection interval reaches/exceeds this value, a
zhoneVdslPerfLossThreshNotification notification will be
generated. One notification will be sent per interval
per endpoint."
::= { zhoneVdslLineAlarmConfProfileEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.4
zhoneVdslLineAlarmConfThresh15MinLprs OBJECT-TYPE
SYNTAX INTEGER (0..900)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of
loss of power seconds (LPRs) within any given 15-minute
performance data collection interval. If the value of
loss of power seconds in a particular 15-minute collection
interval reaches/exceeds this value, a
zhoneVdslPerfLprsThreshNotification notification will be
generated. No more than one notification will be sent
per interval."
::= { zhoneVdslLineAlarmConfProfileEntry 4 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.5
zhoneVdslLineAlarmConfThresh15MinLols OBJECT-TYPE
SYNTAX INTEGER (0..900)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of
loss of link seconds (LOLs) within any given 15-minute
performance data collection interval. If the value of
loss of link seconds in a particular 15-minute collection
interval reaches/exceeds this value, a
zhoneVdslPerfLolsThreshNotification notification will be
generated. No more than one notification will be sent
per interval."
::= { zhoneVdslLineAlarmConfProfileEntry 5 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.6
zhoneVdslLineAlarmConfThresh15MinESs OBJECT-TYPE
SYNTAX INTEGER (0..900)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of
errored seconds (ESs) within any given 15-minute
performance data collection interval. If the value of
errored seconds in a particular 15-minute collection
interval reaches/exceeds this value, a
zhoneVdslPerfEssThreshNotification notification will be
generated. No more than one notification will be sent
per interval."
::= { zhoneVdslLineAlarmConfProfileEntry 6 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.7
zhoneVdslLineAlarmConfThresh15MinSESs OBJECT-TYPE
SYNTAX INTEGER (0..900)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of
severely errored seconds (SESs) within any given 15-minute
performance data collection interval. If the value of
severely errored seconds in a particular 15-minute
collection interval reaches/exceeds this value, a
zhoneVdslPerfSessThreshNotification notification will be
generated. No more than one notification will be sent
per interval."
::= { zhoneVdslLineAlarmConfProfileEntry 7 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.8
zhoneVdslLineAlarmConfThresh15MinUASs OBJECT-TYPE
SYNTAX INTEGER (0..900)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of
unavailable seconds (UASs) within any given 15-minute
performance data collection interval. If the value of
unavailable seconds in a particular 15-minute collection
interval reaches/exceeds this value, a
zhoneVdslPerfUassThreshNotification notification will be
generated. No more than one notification will be sent
per interval."
::= { zhoneVdslLineAlarmConfProfileEntry 8 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.9
zhoneVdslLineAlarmConfInitFailure OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if a vdslInitFailureNotification
notification will be generated if an initialization
failure occurs."
DEFVAL { false }
::= { zhoneVdslLineAlarmConfProfileEntry 9 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.10
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.10
zhoneVdslLineAlarmConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of service,
(by setting this object to 'destroy' or 'outOfService') it
must be first unreferenced from all associated lines.
An 'active' profile may be modified at any time."
::= { zhoneVdslLineAlarmConfProfileEntry 10 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.11
zhoneVdslLineAlarmConfThresh1DayLofs OBJECT-TYPE
SYNTAX INTEGER (0..86400)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of loss
of frame seconds (LOFs) within any given 1-day performance
data collection interval. If the value of loss of frame
seconds in a particular 1-day collection interval reaches/exceeds
this value, a zhoneVdslPerfLofsThreshNotification notification
will be generated. No more than one notification will be sent
per interval"
::= { zhoneVdslLineAlarmConfProfileEntry 11 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.12
zhoneVdslLineAlarmConfThresh1DayLoss OBJECT-TYPE
SYNTAX INTEGER (0..86400)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of loss
of signal seconds (LOSs) within any given 1-day performance
data collection interval. If the value of loss of signal
seconds in a particular 1-day collection interval reaches/exceeds
this value, a zhoneVdslPerfLossThreshNotification notification
will be generated. No more than one notification will be sent
per interval"
::= { zhoneVdslLineAlarmConfProfileEntry 12 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.13
zhoneVdslLineAlarmConfThresh1DayLprs OBJECT-TYPE
SYNTAX INTEGER (0..86400)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of loss
of power seconds (LPRs) within any given 1-day performance
data collection interval. If the value of loss of power
seconds in a particular 1-day collection interval reaches/exceeds
this value, a zhoneVdslPerfLprsThreshNotification notification
will be generated. No more than one notification will be sent
per interval"
::= { zhoneVdslLineAlarmConfProfileEntry 13 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.14
zhoneVdslLineAlarmConfThresh1DayLols OBJECT-TYPE
SYNTAX INTEGER (0..86400)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of loss
of link seconds (LOLs) within any given 1-day performance
data collection interval. If the value of loss of link
seconds in a particular 1-day collection interval reaches/exceeds
this value, a zhoneVdslPerfLolsThreshNotification notification
will be generated. No more than one notification will be sent
per interval"
::= { zhoneVdslLineAlarmConfProfileEntry 14 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.15
zhoneVdslLineAlarmConfThresh1DayESs OBJECT-TYPE
SYNTAX INTEGER (0..86400)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of errored
seconds (ESs) within any given 1-day performance
data collection interval. If the value of errored seconds in
a particular 1-day collection interval reaches/exceeds
this value, a zhoneVdslPerfEssThreshNotification notification
will be generated. No more than one notification will be sent
per interval"
::= { zhoneVdslLineAlarmConfProfileEntry 15 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.16
zhoneVdslLineAlarmConfThresh1DaySESs OBJECT-TYPE
SYNTAX INTEGER (0..86400)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of severely
errored seconds (SESs) within any given 1-day performance
data collection interval. If the value of severely errored
seconds in a particular 1-day collection interval reaches/exceeds
this value, a zhoneVdslPerfSessThreshNotification notification
will be generated. No more than one notification will be sent
per interval"
::= { zhoneVdslLineAlarmConfProfileEntry 16 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.17
zhoneVdslLineAlarmConfThresh1DayUASs OBJECT-TYPE
SYNTAX INTEGER (0..86400)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the threshold for the number of
unavailable seconds (UASs) within any given 1-day performance
data collection interval. If the value of unavailable seconds
in a particular 1-day collection interval reaches/exceeds this
value, a zhoneVdslPerfUasThreshNotification notification will
be generated. No more than one notification will be sent
per interval"
::= { zhoneVdslLineAlarmConfProfileEntry 17 }
-- 1.3.6.1.4.1.5504.5.13.1.1.20.1.18
zhoneVdslLineAlarmConfThresh1DayInitFailure OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if a vdslThresh1DayInitFailureNotification
notification will be generated if an initialization
failure occurs."
DEFVAL { false }
::= { zhoneVdslLineAlarmConfProfileEntry 18 }
-- 1.3.6.1.4.1.5504.5.13.1.1.21
zhoneVdslCustomNotchConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslCustomNotchConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains HAM (Handheld Amateur
Radio) custom notch information."
::= { zhoneVdslMibObjects 21 }
-- 1.3.6.1.4.1.5504.5.13.1.1.21.1
zhoneVdslCustomNotchConfProfileEntry OBJECT-TYPE
SYNTAX ZhoneVdslCustomNotchConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each VDSL port can have custom notches."
INDEX { ifIndex, zhoneVdslCustomNotchConfId }
::= { zhoneVdslCustomNotchConfProfileTable 1 }
ZhoneVdslCustomNotchConfProfileEntry ::=
SEQUENCE {
zhoneVdslCustomNotchConfId
Unsigned32,
zhoneVdslCustomNotchConfStart
Unsigned32,
zhoneVdslCustomNotchConfStop
Unsigned32
}
-- 1.3.6.1.4.1.5504.5.13.1.1.21.1.1
zhoneVdslCustomNotchConfId OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Each VDSL2 port can have eight (8) custom
notch pairs."
::= { zhoneVdslCustomNotchConfProfileEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.21.1.2
zhoneVdslCustomNotchConfStart OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the start frequency of custom HAM (Handheld
Amateur Radio) notch. zhoneVdslCustomNotchConfStart MUST
be less than or equal to zhoneVdslCustomNotchConfStop."
::= { zhoneVdslCustomNotchConfProfileEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.21.1.3
zhoneVdslCustomNotchConfStop OBJECT-TYPE
SYNTAX Unsigned32 (0..200000)
UNITS "kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the end frequency of custom HAM (Handheld
Amateur Radio) notch. zhoneVdslCustomNotchConfStop MUST
be greater than or equal to zhoneVdslCustomNotchConfStart."
::= { zhoneVdslCustomNotchConfProfileEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.22
zhoneVdslVectDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneVdslVectDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to retrieve the vectoring packet counts."
::= { zhoneVdslMibObjects 22 }
-- 1.3.6.1.4.1.5504.5.13.1.1.22.1
zhoneVdslVectDataEntry OBJECT-TYPE
SYNTAX ZhoneVdslVectDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vectoring Packet statistics data"
INDEX { ifIndex }
::= { zhoneVdslVectDataTable 1 }
ZhoneVdslVectDataEntry ::=
SEQUENCE {
zhoneVdslVectDataEsDsCounter
Integer32,
zhoneVdslVectDataEsUsCounter
Integer32,
zhoneVdslVectDataIsDsFeValid
Integer32,
zhoneVdslVectDataEsFeDsCounter
Integer32
}
-- 1.3.6.1.4.1.5504.5.13.1.1.22.1.1
zhoneVdslVectDataEsDsCounter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error Sample Downstream Packet Counter"
DEFVAL { 0 }
::= { zhoneVdslVectDataEntry 1 }
-- 1.3.6.1.4.1.5504.5.13.1.1.22.1.2
zhoneVdslVectDataEsUsCounter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error Sample Upstream Packet Counter"
::= { zhoneVdslVectDataEntry 2 }
-- 1.3.6.1.4.1.5504.5.13.1.1.22.1.3
zhoneVdslVectDataIsDsFeValid OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is Downstream Fe Valid"
::= { zhoneVdslVectDataEntry 3 }
-- 1.3.6.1.4.1.5504.5.13.1.1.22.1.4
zhoneVdslVectDataEsFeDsCounter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error Sample Fe Downstream Counter"
::= { zhoneVdslVectDataEntry 4 }
-- conformance information
-- 1.3.6.1.4.1.5504.5.13.1.3
-- 1.3.6.1.4.1.5504.5.13.1.3
zhoneVdslConformance OBJECT IDENTIFIER ::= { zhoneVdslLineMib 3 }
-- 1.3.6.1.4.1.5504.5.13.1.3.1
-- 1.3.6.1.4.1.5504.5.13.1.3.1
zhoneVdslGroups OBJECT IDENTIFIER ::= { zhoneVdslConformance 1 }
-- units of conformance
-- 1.3.6.1.4.1.5504.5.13.1.3.1.1
-- 1.3.6.1.4.1.5504.5.13.1.3.1.1
zhoneVdslGroup OBJECT-GROUP
OBJECTS { zhoneVdslLineCoding, zhoneVdslLineType, zhoneVdslLineConfProfile, zhoneVdslLineAlarmConfProfile, zhoneVdslPhysInvSerialNumber,
zhoneVdslPhysInvVendorID, zhoneVdslPhysInvVersionNumber, zhoneVdslPhysCurrSnrMgn, zhoneVdslPhysCurrAtn, zhoneVdslPhysCurrStatus,
zhoneVdslPhysCurrOutputPwr, zhoneVdslPhysCurrAttainableRate, zhoneVdslPhysCurrLineRate, zhoneVdslChanInterleaveDelay, zhoneVdslChanCrcBlockLength,
zhoneVdslChanCurrTxRate, zhoneVdslChanCurrTxSlowBurstProtect, zhoneVdslChanCurrTxFastFec, zhoneVdslPerfDataValidIntervals, zhoneVdslPerfDataInvalidIntervals,
zhoneVdslPerfDataLofs, zhoneVdslPerfDataLoss, zhoneVdslPerfDataLprs, zhoneVdslPerfDataLols, zhoneVdslPerfDataESs,
zhoneVdslPerfDataSESs, zhoneVdslPerfDataUASs, zhoneVdslPerfDataInits, zhoneVdslPerfDataCurr15MinTimeElapsed, zhoneVdslPerfDataCurr15MinLofs,
zhoneVdslPerfDataCurr15MinLoss, zhoneVdslPerfDataCurr15MinLprs, zhoneVdslPerfDataCurr15MinLols, zhoneVdslPerfDataCurr15MinESs, zhoneVdslPerfDataCurr15MinSESs,
zhoneVdslPerfDataCurr15MinUASs, zhoneVdslPerfDataCurr15MinInits, zhoneVdslPerfData1DayValidIntervals, zhoneVdslPerfData1DayInvalidIntervals, zhoneVdslPerfDataCurr1DayTimeElapsed,
zhoneVdslPerfDataCurr1DayLofs, zhoneVdslPerfDataCurr1DayLoss, zhoneVdslPerfDataCurr1DayLprs, zhoneVdslPerfDataCurr1DayLols, zhoneVdslPerfDataCurr1DayESs,
zhoneVdslPerfDataCurr1DaySESs, zhoneVdslPerfDataCurr1DayUASs, zhoneVdslPerfDataCurr1DayInits, zhoneVdslPerfIntervalLofs, zhoneVdslPerfIntervalLoss,
zhoneVdslPerfIntervalLprs, zhoneVdslPerfIntervalLols, zhoneVdslPerfIntervalESs, zhoneVdslPerfIntervalSESs, zhoneVdslPerfIntervalUASs,
zhoneVdslPerfIntervalInits, zhoneVdslPerf1DayIntervalMoniSecs, zhoneVdslPerf1DayIntervalLofs, zhoneVdslPerf1DayIntervalLoss, zhoneVdslPerf1DayIntervalLprs,
zhoneVdslPerf1DayIntervalLols, zhoneVdslPerf1DayIntervalESs, zhoneVdslPerf1DayIntervalSESs, zhoneVdslPerf1DayIntervalUASs, zhoneVdslPerf1DayIntervalInits,
zhoneVdslChanValidIntervals, zhoneVdslChanInvalidIntervals, zhoneVdslChanFixedOctets, zhoneVdslChanBadBlks, zhoneVdslChanCurr15MinTimeElapsed,
zhoneVdslChanCurr15MinFixedOctets, zhoneVdslChanCurr15MinBadBlks, zhoneVdslChan1DayValidIntervals, zhoneVdslChan1DayInvalidIntervals, zhoneVdslChanCurr1DayTimeElapsed,
zhoneVdslChanCurr1DayFixedOctets, zhoneVdslChanCurr1DayBadBlks, zhoneVdslChanIntervalFixedOctets, zhoneVdslChanIntervalBadBlks, zhoneVdslChan1DayIntervalMoniSecs,
zhoneVdslChan1DayIntervalFixedOctets, zhoneVdslChan1DayIntervalBadBlks, zhoneVdslLineConfDownRateMode, zhoneVdslLineConfUpRateMode, zhoneVdslLineConfDownMaxPwr,
zhoneVdslLineConfUpMaxPwr, zhoneVdslLineConfDownMaxSnrMgn, zhoneVdslLineConfDownMinSnrMgn, zhoneVdslLineConfDownTargetSnrMgn, zhoneVdslLineConfUpMaxSnrMgn,
zhoneVdslLineConfUpMinSnrMgn, zhoneVdslLineConfUpTargetSnrMgn, zhoneVdslLineConfDownFastMaxDataRate, zhoneVdslLineConfDownFastMinDataRate, zhoneVdslLineConfDownSlowMaxDataRate,
zhoneVdslLineConfDownSlowMinDataRate, zhoneVdslLineConfUpFastMaxDataRate, zhoneVdslLineConfUpFastMinDataRate, zhoneVdslLineConfUpSlowMaxDataRate, zhoneVdslLineConfUpSlowMinDataRate,
zhoneVdslLineConfDownRateRatio, zhoneVdslLineConfUpRateRatio, zhoneVdslLineConfDownMaxInterDelay, zhoneVdslLineConfUpMaxInterDelay, zhoneVdslLineConfDownPboControl,
zhoneVdslLineConfUpPboControl, zhoneVdslLineConfDownPboLevel, zhoneVdslLineConfUpPboLevel, zhoneVdslLineConfDeploymentScenario, zhoneVdslLineConfAdslPresence,
zhoneVdslLineConfApplicableStandard, zhoneVdslLineConfBandPlan, zhoneVdslLineConfBandPlanFx, zhoneVdslLineConfBandOptUsage, zhoneVdslLineConfUpPsdTemplate,
zhoneVdslLineConfDownPsdTemplate, zhoneVdslLineConfHamBandMask, zhoneVdslLineConfCustomNotch1Start, zhoneVdslLineConfCustomNotch1Stop, zhoneVdslLineConfCustomNotch2Start,
zhoneVdslLineConfCustomNotch2Stop, zhoneVdslLineConfDownTargetSlowBurst, zhoneVdslLineConfUpTargetSlowBurst, zhoneVdslLineConfDownMaxFastFec, zhoneVdslLineConfUpMaxFastFec,
zhoneVdslLineConfLineType, zhoneVdslLineConfProfRowStatus, zhoneVdslLineAlarmConfThresh15MinLofs, zhoneVdslLineAlarmConfThresh15MinLoss, zhoneVdslLineAlarmConfThresh15MinLprs,
zhoneVdslLineAlarmConfThresh15MinLols, zhoneVdslLineAlarmConfThresh15MinESs, zhoneVdslLineAlarmConfThresh15MinSESs, zhoneVdslLineAlarmConfThresh15MinUASs, zhoneVdslLineAlarmConfInitFailure,
zhoneVdslLineAlarmConfThresh1DayLofs, zhoneVdslLineAlarmConfThresh1DayLoss, zhoneVdslLineAlarmConfThresh1DayLprs, zhoneVdslLineAlarmConfThresh1DayLols, zhoneVdslLineAlarmConfThresh1DayInitFailure,
zhoneVdslLineConfAutoModeCrtrn, zhoneVdslLineConfAdslBandMode, zhoneVdslLineConfAdslBandModeEndFreq, zhoneVdslLineConfSeltAgc, zhoneVdslLineConfVdsl2Profile,
zhoneVdslLineConfVdslMode, zhoneVdslLineConfPboElectricalOverride, zhoneVdslLineConfDownMaxPsd, zhoneVdslLineConfDownMaxAggregateTxPwr, zhoneVdslLineConfDownPsdShape,
zhoneVdslLineConfDownVirtualNoiseSnrMode, zhoneVdslLineConfDownGhsA43TonePwr, zhoneVdslLineConfDownErasureDetectionFast, zhoneVdslLineConfDownErasureDetectionInterleave, zhoneVdslLineConfDownGhsB43TonePwr,
zhoneVdslLineConfDownGhsV43TonePwr, zhoneVdslLineConfDownGhsA43TonePwrMaxLvl, zhoneVdslLineConfDownGhsA43cTonePwrMaxLvl, zhoneVdslLineConfDownGhsB43TonePwrMaxLvl, zhoneVdslLineConfDownGhsV43TonePwrMaxLvl,
zhoneVdslLineConfDownRsCoding, zhoneVdslLineAlarmConfProfRowStatus, zhoneVdslLineConfUpErasureDetectionFast, zhoneVdslLineConfUpPboPsdParamB1, zhoneVdslLineConfUpPboPsdParamA1,
zhoneVdslLineConfUpPboPsdParamA2, zhoneVdslLineConfUpPboPsdParamB2, zhoneVdslLineConfUpVirtualNoiseSnrMode, zhoneVdslLineConfUpErasureDetectionInterleave, zhoneVdslLineConfUpRsCoding,
zhoneVdslLineConfUpPsdShape, zhoneVdslLineConfUpPboPsdTemplate, zhoneVdslLineConfNetworkTimingRef, zhoneVdslLineConfUpMaxAggregateTxPwr, zhoneVdslLineConfDownTrellis,
zhoneVdslLineConfUpTrellis, zhoneVdslLineConfUpMaxPsd, zhoneVdslLineAlarmConfThresh1DayESs, zhoneVdslLineAlarmConfThresh1DaySESs, zhoneVdslLineAlarmConfThresh1DayUASs,
zhoneVdslLineConfSeltEchoMeasurementTime, zhoneVdslCustomNotchConfStop, zhoneVdslLineConfSeltNoiseMeasurementTime, zhoneVdslCustomNotchConfStart, zhoneVdslLineConfTransmissionMode,
zhoneVdslLineConfDownDownshiftSnrMgn, zhoneVdslLineConfDownUpshiftSnrMgn, zhoneVdslLineConfDownMinDownshiftTime, zhoneVdslLineConfDownMinUpshiftTime, zhoneVdslLineConfUpDownshiftSnrMgn,
zhoneVdslLineConfUpUpshiftSnrMgn, zhoneVdslLineConfUpMinDownshiftTime, zhoneVdslLineConfUpMinUpshiftTime, zhoneVdslCustomNotchConfId, zhoneVdslLineConfDownGhsA43cTonePwr,
zhoneVdslLineConfDMTConfMode, zhoneVdslLineConfPotsBypassRelayMaxDuration, zhoneVdslLineConfDownBitSwap, zhoneVdslLineConfUpBitSwap, zhoneVdslLineConfAdslAnnexMModeEnabled,
zhoneVdslLineConfAdslAnnexMPsdMask, zhoneVdslLineConfUs0BoundaryTone, zhoneVdslLineConfDownInp, zhoneVdslLineConfUpInp, zhoneVdslLineConfDownMaxInterleavingDelay,
zhoneVdslLineConfUpMaxInterleavingDelay, zhoneVdslLineConfDownPsdMaskEnable, zhoneVdslLineConfUpPsdMaskEnable, zhoneVdslLineConfDownPsdMaskSelect, zhoneVdslLineConfUpPsdMaskSelect,
zhoneVdslPhysCurrProfile, zhoneVdslPhysCurrConnType, zhoneVdslLineEnableTrellisCoding, zhoneVdslLineEnableRsCoding, zhoneVdslLineConfPsdShape,
zhoneVdslLineConfDownPhyRSupport, zhoneVdslLineConfUpPhyRSupport, zhoneVdslLineConfDownPhyRmaxINP, zhoneVdslLineConfUpPhyRmaxINP, zhoneVdslLineConfDownPhyRminRSoverhead,
zhoneVdslLineConfUpPhyRminRSoverhead, zhoneVdslLineConfDownPhyRRtxRatio, zhoneVdslLineConfUpPhyRRtxRatio, zhoneVdslLineConfUpPboPsdParamA3, zhoneVdslLineConfUpPboPsdParamA4,
zhoneVdslLineConfUpPboPsdParamB3, zhoneVdslLineConfUpPboPsdParamB4, zhoneVdslLineConfFallbackDefaultVpi, zhoneVdslLineConfFallbackDefaultVci, zhoneVdslLineConfUpMinTxThresholdAlarm,
zhoneVdslLineConfDownMinTxThresholdAlarm }
STATUS current
DESCRIPTION
"A collection of objects providing information about
a VDSL Line."
::= { zhoneVdslGroups 1 }
-- 1.3.6.1.4.1.5504.5.13.1.3.1.2
-- 1.3.6.1.4.1.5504.5.13.1.3.1.2
zhoneVdslNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { vdslXtucPerf15MinLofsThreshTrap, vdslXtucPerf15MinLossThreshTrap, vdslXtucPerf15MinLprsThreshTrap, vdslXtucPerf15MinLolsThreshTrap, vdslXtucPerf15MinESsThreshTrap,
vdslXtucPerf15MinSESsThreshTrap, vdslXtucPerf15MinUASsThreshTrap, vdslXtucPerf1DayLofsThreshTrap, vdslXtucPerf1DayLossThreshTrap, vdslXtucPerf1DayLprsThreshTrap,
vdslXtucPerf1DayLolsThreshTrap, vdslXtucPerf1DayESsThreshTrap, vdslXtucPerf1DaySESsThreshTrap, vdslXtucPerf1DayUASsThreshTrap, zhoneVdslInitFailureTrap,
vdslXtucMinTxThresholdAlarmFailureTrap, vdslXturMinTxThresholdAlarmFailureTrap }
STATUS current
DESCRIPTION
"This group supports notifications of significant
conditions associated with VDSL Lines."
::= { zhoneVdslGroups 2 }
-- 1.3.6.1.4.1.5504.5.13.1.3.2
-- 1.3.6.1.4.1.5504.5.13.1.3.2
zhoneVdslCompliances OBJECT IDENTIFIER ::= { zhoneVdslConformance 2 }
-- this module
-- 1.3.6.1.4.1.5504.5.13.1.3.2.1
-- this module
-- 1.3.6.1.4.1.5504.5.13.1.3.2.1
zhoneVdslLineMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which
manage VDSL interfaces."
MODULE -- this module
MANDATORY-GROUPS { zhoneVdslGroup, zhoneVdslNotificationGroup }
::= { zhoneVdslCompliances 1 }
END
--
-- phyVdsl.mib
--
View Git Blame Copy Permalink