686 lines
21 KiB
Plaintext
686 lines
21 KiB
Plaintext
-- Copyright (C) 2008-2012 by Zhone Technologies. All Rights Reserved.
|
|
|
|
-- ======================================================================
|
|
-- == ==
|
|
-- == ZHN-PW MIB ==
|
|
-- == ==
|
|
-- == Copyright (C) 2008-2012 Zhone Technologies, Inc. ==
|
|
-- == Confidential, Unpublished Property of Zhone Technologies. ==
|
|
-- == Rights Reserved Under the Copyright Laws of the United States. ==
|
|
-- == ==
|
|
-- ======================================================================
|
|
|
|
|
|
ZHNPWMIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, Unsigned32, Counter32, Counter64, TimeTicks,
|
|
transmission, IpAddress
|
|
FROM SNMPv2-SMI -- [RFC2578]
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- [RFC2580]
|
|
|
|
TruthValue, RowStatus, StorageType, MacAddress, DisplayString,
|
|
TimeStamp
|
|
FROM SNMPv2-TC -- [RFC2579]
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
|
|
|
|
InetAddressType, InetAddress
|
|
FROM INET-ADDRESS-MIB -- [RFC4001]
|
|
|
|
PwIndexType, PwIndexOrZeroType, PwVlanCfg
|
|
FROM PW-TC-STD-MIB -- [PWTC]
|
|
-- RFC Editor: Please replace [PWTC] with RFC number and remove this
|
|
-- note.
|
|
|
|
IANAPwTypeTC, IANAPwPsnTypeTC, IANAPwCapabilities
|
|
FROM IANA-PWE3-MIB -- Reference will be added
|
|
-- When IANA will create the
|
|
-- MIB module
|
|
zhoneWtn
|
|
FROM Zhone
|
|
;
|
|
|
|
|
|
zhnPwMib MODULE-IDENTITY
|
|
LAST-UPDATED "201205161200Z" -- May 16, 2012
|
|
ORGANIZATION "Zhone Technologies"
|
|
CONTACT-INFO
|
|
"Zhone Technologies, Inc.
|
|
Florida Design Center
|
|
8545 126th Avenue North
|
|
Largo, FL 33773
|
|
|
|
Toll-Free: +1 877-ZHONE20 (+1 877-946-6320)
|
|
Tel: +1-510-777-7000
|
|
Fax: +1-510-777-7001
|
|
E-mail: support@zhone.com"
|
|
|
|
DESCRIPTION
|
|
"This is the Zhone Enterprise MIB module for the Configuration
|
|
of Zhone Proprietary Pseudo-Wire Interfaces."
|
|
|
|
REVISION "201205161200Z" -- May 16, 2012 at 12:00 GMT
|
|
DESCRIPTION "Removed comma in the end of the last line of the enum definitions."
|
|
|
|
REVISION "201201271200Z" -- Jan 27, 2012
|
|
DESCRIPTION "Added new PWE table objects:
|
|
zhnPwClkAcquisitionLevel
|
|
zhnPwClearTotalStats
|
|
"
|
|
|
|
REVISION "201108290000Z" -- Aug 29, 2011
|
|
DESCRIPTION "Added new PWE table objects:
|
|
zhnPwActualPayloadSize
|
|
zhnPwRxRaiAction
|
|
zhnPwRxAisAction
|
|
zhnPwLopAction
|
|
zhnPwAdaptState
|
|
zhnPwAdaptTime
|
|
zhnPwIsdn
|
|
zhnPwOuterLabel
|
|
|
|
And, added new PWE scalar objects:
|
|
zhnPwRtpHeaderMode
|
|
zhnPwAdaptPllMode
|
|
zhnPwAutoAdclEnable
|
|
zhnPwAdaptSourceActual
|
|
zhnPwSourceIPAddr
|
|
zhnPwSourceIPMask
|
|
zhnPwSourceGateway
|
|
zhnPwUdpDstPort
|
|
zhnPwT1E1Mode
|
|
zhnPeerPingName
|
|
zhnPeerPingRequest
|
|
zhnPeerPingStatus
|
|
"
|
|
|
|
REVISION "200811060000Z" -- Nov 6, 2008
|
|
DESCRIPTION "Initial release."
|
|
|
|
|
|
::= { zhoneWtn 31 }
|
|
|
|
|
|
PwClearStatisticsTC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the action to perform on statistics counters.
|
|
- noAction(0): No action.
|
|
- clear(1): Clear the statistics counters.
|
|
"
|
|
SYNTAX INTEGER {
|
|
noAction(0),
|
|
clear(1)
|
|
}
|
|
|
|
|
|
|
|
zhnPwNotifications OBJECT IDENTIFIER ::= { zhnPwMib 0 }
|
|
zhnPwObjects OBJECT IDENTIFIER ::= { zhnPwMib 1 }
|
|
zhnPwConformance OBJECT IDENTIFIER ::= { zhnPwMib 2 }
|
|
|
|
|
|
-- ***************************************************************
|
|
-- Zhone Enterprise PW Configuration Table
|
|
-- ***************************************************************
|
|
|
|
-- 1.3.6.1.4.1.5504.2.5.31.1.1
|
|
zhnPwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhnPwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the Zhone Proprietary
|
|
Pseudo-Wire interface information."
|
|
::= { zhnPwObjects 1 }
|
|
|
|
zhnPwEntry OBJECT-TYPE
|
|
SYNTAX ZhnPwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents a pseudowire (PW) virtual
|
|
connection across a packet network. It is indexed by
|
|
pwIndex, which uniquely identifies a singular
|
|
connection.
|
|
A row is only created when an entry in the PW-STD-MIB pwTable
|
|
is created and includes adjunct information to the pwTable."
|
|
INDEX { zhnPwIndex }
|
|
::= { zhnPwTable 1 }
|
|
|
|
|
|
ZhnPwEntry ::=
|
|
SEQUENCE {
|
|
zhnPwIndex PwIndexType,
|
|
zhnPwVlanID PwVlanCfg,
|
|
zhnPwVlanPriority Unsigned32,
|
|
zhnPwPeerMask IpAddress,
|
|
zhnPwPeerGateway IpAddress,
|
|
zhnPwPeerMAC MacAddress,
|
|
zhnPwMappedIfName SnmpAdminString,
|
|
zhnPwLocalLMBits INTEGER,
|
|
zhnPwLocalRBit INTEGER,
|
|
zhnPwRemoteLMBits INTEGER,
|
|
zhnPwRemoteRBit INTEGER,
|
|
zhnPwPeerMACMode INTEGER,
|
|
zhnPwActualPayloadSize Unsigned32,
|
|
zhnPwRxRaiAction INTEGER,
|
|
zhnPwRxAisAction INTEGER,
|
|
zhnPwLopAction INTEGER,
|
|
zhnPwAdaptState INTEGER,
|
|
zhnPwAdaptTime INTEGER,
|
|
zhnPwIsdn INTEGER,
|
|
zhnPwOuterLabel Unsigned32,
|
|
zhnPwClkAcquisitionLevel Unsigned32,
|
|
zhnPwClearTotalStats PwClearStatisticsTC
|
|
|
|
}
|
|
|
|
|
|
zhnPwIndex OBJECT-TYPE
|
|
SYNTAX PwIndexType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique index for the conceptual row identifying a PW within
|
|
this table."
|
|
::= { zhnPwEntry 1 }
|
|
|
|
zhnPwVlanID OBJECT-TYPE
|
|
SYNTAX PwVlanCfg
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID which this PW is mapped to. If the value is
|
|
zero, the VLAN is untagged. "
|
|
DEFVAL { 0 }
|
|
::= { zhnPwEntry 2 }
|
|
|
|
zhnPwVlanPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN priority."
|
|
DEFVAL { 0 }
|
|
::= { zhnPwEntry 3 }
|
|
|
|
zhnPwPeerMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the subnet mask for the peer.
|
|
This object is required if the Peer Type is IPv4."
|
|
::= { zhnPwEntry 4 }
|
|
|
|
zhnPwPeerGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the gateway address for the peer.
|
|
This object is required if the Peer Type is IPv4."
|
|
::= { zhnPwEntry 5 }
|
|
|
|
zhnPwPeerMAC OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the MAC address for the peer."
|
|
::= { zhnPwEntry 6 }
|
|
|
|
zhnPwMappedIfName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the interface mapped to this PW. If the PW is a
|
|
structure-agnostic (i.e. SATOP) connection, the interface
|
|
name should be that of a T1/E1 port. It the PW is a
|
|
structure-aware connection, the interface name should be
|
|
that of a DS0 Bundle."
|
|
::= { zhnPwEntry 7 }
|
|
|
|
zhnPwLocalLMBits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noDefect (0),
|
|
reserved1 (1),
|
|
rxRDI (2),
|
|
nonTDMData (3),
|
|
txAIS (4),
|
|
reserved2 (5),
|
|
reserved3 (6),
|
|
reserved4 (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the value of the Local TDM Failure (L-Bit) and
|
|
the Modifier bits (M-bits) currently transmitted.
|
|
Refer to RFC 5086 for more information on the L/M bits."
|
|
::= { zhnPwEntry 8 }
|
|
|
|
zhnPwLocalRBit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (1),
|
|
off (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the value of the Remote Loss of Frames indication
|
|
(R-Bit) currently transmitted."
|
|
::= { zhnPwEntry 9 }
|
|
|
|
zhnPwRemoteLMBits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noDefect (0),
|
|
reserved1 (1),
|
|
rxRDI (2),
|
|
nonTDMData (3),
|
|
txAIS (4),
|
|
reserved2 (5),
|
|
reserved3 (6),
|
|
reserved4 (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the value of the Local Failure (L-Bit) and
|
|
the Modifier bits (M-bits) currently received.
|
|
Refer to RFC 5086 for more information on the L/M bits."
|
|
::= { zhnPwEntry 10 }
|
|
|
|
zhnPwRemoteRBit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on (1),
|
|
off (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the value of the Remote Loss of Frames indication
|
|
(R-Bit) currently received."
|
|
::= { zhnPwEntry 11 }
|
|
|
|
zhnPwPeerMACMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dynamic(1),
|
|
static(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to dynamic(1) will cause PW to ARP
|
|
for the MAC address of the peer node. If the value of
|
|
this object is static(2), the peer MAC address is the
|
|
value of object pwPeerMAC."
|
|
::= { zhnPwEntry 12 }
|
|
|
|
zhnPwActualPayloadSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates the actual PayLoad Size (in bytes)."
|
|
::= { zhnPwEntry 13 }
|
|
|
|
zhnPwRxRaiAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
txAIS (2),
|
|
txRAI (3),
|
|
txChlIdle (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the action to be taken upon when receiving L,M bits equal
|
|
to 0,10 (rxRAI). When set to none (1), the payload will be transmitted
|
|
as it was received. When set to txAIS (2), the AIS pattern will be transmitted
|
|
towards the local CE. When set to txRAI (3), the RAI pattern will be
|
|
transmitted towards the local CE. When set to txChlIdle (4), the Channel Idle
|
|
signal will be transmitted towards the local CE."
|
|
::= { zhnPwEntry 14 }
|
|
|
|
zhnPwRxAisAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
txAIS (2),
|
|
txRAI (3),
|
|
txChlIdle (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the action to be taken upon when receiving L,M bits equal
|
|
to 1,00 (rxAIS). When set to none (1), the payload will be transmitted
|
|
as it was received. When set to txAIS (2), the AIS pattern will be transmitted
|
|
towards the local CE. When set to txRAI (3), the RAI pattern will be
|
|
transmitted towards the local CE. When set to txChlIdle (4), the Channel Idle
|
|
signal will be transmitted towards the local CE. "
|
|
::= { zhnPwEntry 15 }
|
|
|
|
zhnPwLopAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
txAIS (2),
|
|
txRAI (3),
|
|
txChlIdle (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the action to be taken while in a Loss or Packets state.
|
|
When set to none (1), the payload will be transmitted as it was received.
|
|
When set to txAIS (2), the AIS pattern will be transmitted towards the
|
|
local CE. When set to txRAI (3), the RAI pattern will be transmitted
|
|
towards the local CE. When set to txChlIdle (4), the Channel Idle signal
|
|
will be transmitted towards the local CE."
|
|
::= { zhnPwEntry 16 }
|
|
|
|
zhnPwAdaptState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle (1),
|
|
acquisition (2),
|
|
tracking1 (3),
|
|
tracking2 (4),
|
|
locked (5),
|
|
recovery (6),
|
|
restart (7),
|
|
disabled (8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current adaptive state. The only value that can be written
|
|
for this object is restart (7), which will restart clock adaption on the port
|
|
associated with the bundle."
|
|
::= { zhnPwEntry 17 }
|
|
|
|
zhnPwAdaptTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current adaptive timestamp."
|
|
::= { zhnPwEntry 18 }
|
|
|
|
zhnPwIsdn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
lt (2),
|
|
nt1 (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the endpoint is of IDSN type as defined in ETS 300 233.
|
|
When Idsn type is set to disabled (1), the payload is transmitted as
|
|
it was received. When set to lt (2), the Line Termination unit is
|
|
connected to the Terminal Equipment. When set to nt1 (3), the Network
|
|
Termination unit connected to the Exchange Equipment."
|
|
::= { zhnPwEntry 19 }
|
|
|
|
zhnPwOuterLabel OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is the MPLS 20-bit outer tag. This
|
|
object is only applicable for MPLS PW connections."
|
|
::= { zhnPwEntry 20 }
|
|
|
|
zhnPwClkAcquisitionLevel OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PLL clock acquisition level from 0 - 15. Level 8 or higher is required
|
|
for reliable operation. During the clock acquisition process, the Phase Lock
|
|
Loop moves through 16 adjustment levels. Level 0 is the starting phase, with
|
|
very coarse adjustments. Level 15 is the final phase, with very fine adjustment.
|
|
Once level 8 has been reached, the acquired clock is highly accurate.
|
|
This object is also referred to as the PWE Adaptive Clock Counter."
|
|
::= { zhnPwEntry 21 }
|
|
|
|
zhnPwClearTotalStats OBJECT-TYPE
|
|
SYNTAX PwClearStatisticsTC
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can be used to clear all PWE total statistics counters, contained
|
|
in the pwPerfTotalTable and defined in the PW-STD mib."
|
|
::= { zhnPwEntry 22 }
|
|
|
|
|
|
|
|
|
|
zhnPwRtpHeaderMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the transmission of a RTP header mode for all
|
|
Pseudo-wire connections. Note, the configuration must be saved and
|
|
the system rebooted for this item to take effect."
|
|
::= { zhnPwObjects 2 }
|
|
|
|
zhnPwAdaptPllMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
fine(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the accuracy of the recovered clock for all Pseudo-wire connections.
|
|
Note, configuration must be saved and system rebooted for this item to take
|
|
effect. When set to normal(1), the system will support reliable timing recovery
|
|
in networks with occasional packet delay variation and packet loss. This is the
|
|
recommended mode of operation. When set to fine(2), the accuracy of the recovered
|
|
clock will be slightly higher than normal(1) mode, but during the clock recovery
|
|
phase the network must be stable and predictable and requires pristine network
|
|
conditions during timing acquisition."
|
|
::= { zhnPwObjects 3 }
|
|
|
|
zhnPwAutoAdclEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the ability to automatically select the first available
|
|
Pseudo Wire connection to use for adaptive clock recovery."
|
|
::= { zhnPwObjects 4 }
|
|
|
|
zhnPwAdaptSourceActual OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual Pseudo Wire connection in use for adaptive clock recovery
|
|
if automatic adaptive is disabled."
|
|
::= { zhnPwObjects 5 }
|
|
|
|
zhnPwSourceIPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the IP address for all local Pseudo Wire connections."
|
|
::= { zhnPwObjects 6 }
|
|
|
|
zhnPwSourceIPMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the subnet mask for all local Pseudo Wire connections."
|
|
::= { zhnPwObjects 7 }
|
|
|
|
zhnPwSourceGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the gateway address for all local Pseudo Wire connections."
|
|
::= { zhnPwObjects 8 }
|
|
|
|
zhnPwUdpDstPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the UDP port used by the peer."
|
|
::= { zhnPwObjects 9 }
|
|
|
|
zhnPwT1E1Mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
t1(1),
|
|
e1(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the DS1 mode of operation for all DS1 ports in
|
|
the system."
|
|
::= { zhnPwObjects 10 }
|
|
|
|
zhnPeerPingName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the name of the peer Pseudo Wire connection with
|
|
which to initiate a ping test."
|
|
::= { zhnPwObjects 11 }
|
|
|
|
zhnPeerPingRequest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
start(1),
|
|
stop(2),
|
|
nop(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object starts or stops a Pseudo Wire ping test. A valid zhnPeerPingName
|
|
must be configured for the ping test to be successful."
|
|
::= { zhnPwObjects 12 }
|
|
|
|
zhnPeerPingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reply(1),
|
|
timedout(2),
|
|
none(3),
|
|
unconfigured(4),
|
|
failed(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object retrieves the status of the current or last Pseudo Wire ping
|
|
test initiated by the CPE."
|
|
::= { zhnPwObjects 13 }
|
|
|
|
|
|
|
|
-- ****************************************************************************
|
|
--
|
|
-- Conformance Information
|
|
--
|
|
|
|
zhnPwMibConformance OBJECT IDENTIFIER ::= { zhnPwMib 2 }
|
|
|
|
zhnPwMibGroups OBJECT IDENTIFIER ::= { zhnPwMibConformance 1}
|
|
zhnPwMibCompliances OBJECT IDENTIFIER ::= { zhnPwMibConformance 2}
|
|
|
|
--
|
|
-- Compliance Statements
|
|
--
|
|
|
|
zhnPwMibCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Compliance statement for SNMP entities which
|
|
manage display the Zhone Pseudo-Wire Information.
|
|
"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
zhnPwMibGroup,
|
|
zhnPwMibScalars
|
|
}
|
|
|
|
::= {zhnPwMibCompliances 1}
|
|
|
|
--
|
|
-- Units of Conformance
|
|
--
|
|
|
|
zhnPwMibGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zhnPwVlanID,
|
|
zhnPwVlanPriority,
|
|
zhnPwPeerMask,
|
|
zhnPwPeerGateway,
|
|
zhnPwPeerMAC,
|
|
zhnPwMappedIfName,
|
|
zhnPwLocalLMBits,
|
|
zhnPwLocalRBit,
|
|
zhnPwRemoteLMBits,
|
|
zhnPwRemoteRBit,
|
|
zhnPwPeerMACMode,
|
|
zhnPwActualPayloadSize,
|
|
zhnPwRxRaiAction,
|
|
zhnPwRxAisAction,
|
|
zhnPwLopAction,
|
|
zhnPwAdaptState,
|
|
zhnPwAdaptTime,
|
|
zhnPwIsdn,
|
|
zhnPwOuterLabel,
|
|
zhnPwClkAcquisitionLevel,
|
|
zhnPwClearTotalStats
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Zhone Pseudo-Wire table objects that describe the
|
|
pseudo-wire interfaces of the device."
|
|
::= { zhnPwMibGroups 1}
|
|
|
|
|
|
zhnPwMibScalars OBJECT-GROUP
|
|
OBJECTS {
|
|
zhnPwRtpHeaderMode,
|
|
zhnPwAdaptPllMode,
|
|
zhnPwAutoAdclEnable,
|
|
zhnPwAdaptSourceActual,
|
|
zhnPwSourceIPAddr,
|
|
zhnPwSourceIPMask,
|
|
zhnPwSourceGateway,
|
|
zhnPwUdpDstPort,
|
|
zhnPwT1E1Mode,
|
|
zhnPeerPingName,
|
|
zhnPeerPingRequest,
|
|
zhnPeerPingStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Zhone Pseudo-Wire table scalar objects that describe the
|
|
pseudo-wire emulation of the device."
|
|
::= { zhnPwMibGroups 2}
|
|
|
|
END
|