1206 lines
42 KiB
Plaintext
1206 lines
42 KiB
Plaintext
PW-ATM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Counter32, Unsigned32, mib-2
|
|
FROM SNMPv2-SMI
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
TruthValue, RowStatus, RowPointer
|
|
FROM SNMPv2-TC
|
|
|
|
PerfCurrentCount, PerfIntervalCount
|
|
FROM PerfHist-TC-MIB
|
|
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
|
|
pwIndex
|
|
FROM PW-STD-MIB
|
|
|
|
AtmVpIdentifier, AtmVcIdentifier
|
|
FROM ATM-TC-MIB;
|
|
|
|
pwAtmMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200906160000Z" -- 16 June 2009
|
|
ORGANIZATION "Pseudowire Emulation Edge-to-Edge (PWE3)
|
|
Working Group"
|
|
CONTACT-INFO
|
|
"Thomas D. Nadeau
|
|
Postal: BT
|
|
BT Centre
|
|
81 Newgate Street
|
|
London EC1A 7AJ
|
|
United Kingdom
|
|
|
|
Email: tom.nadeau@bt.com
|
|
|
|
Orly Nicklass
|
|
Postal: RADVISION Ltd.
|
|
24 Raul Wallenberg
|
|
Tel Aviv, Israel
|
|
Email: orlyn@radvision.com
|
|
|
|
Discussion and general questions should be posed to
|
|
the PWE3 Working Group (pwe3@ietf.org)."
|
|
DESCRIPTION
|
|
"This MIB contains managed object definitions for
|
|
pseudowire emulation of ATM over Packet Switched
|
|
Networks (PSNs).
|
|
|
|
This MIB supplements the PW-STD-MIB module.
|
|
The PW-STD-MIB contains structures and MIB associations
|
|
generic to pseudowire (PW) emulation. PW-specific
|
|
MIBs (such as this) contain config and stats for specific
|
|
PW types.
|
|
|
|
Copyright (c) 2009 IETF Trust and the persons identified as
|
|
authors of the code. All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or
|
|
without modification, are permitted provided that the
|
|
following conditions are met:
|
|
|
|
- Redistributions of source code must retain the above
|
|
copyright notice, this list of conditions and the
|
|
following disclaimer.
|
|
|
|
- Redistributions in binary form must reproduce the above
|
|
copyright notice, this list of conditions and the
|
|
following disclaimer in the documentation and/or other
|
|
materials provided with the distribution.
|
|
|
|
- Neither the name of Internet Society, IETF or IETF Trust,
|
|
nor the names of specific contributors, may be used to
|
|
endorse or promote products derived from this software
|
|
without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
|
CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
|
|
|
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
|
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
This version of this MIB module is part of RFC 5605;
|
|
see the RFC itself for full legal notices.
|
|
"
|
|
|
|
-- Revision history.
|
|
|
|
REVISION "200906160000Z" -- 16 June 2009
|
|
DESCRIPTION "Initial version published as RFC 5605."
|
|
::= { mib-2 183 }
|
|
|
|
-- Top-level components of this MIB
|
|
|
|
pwAtmNotifications OBJECT IDENTIFIER ::= { pwAtmMIB 0 }
|
|
pwAtmObjects OBJECT IDENTIFIER ::= { pwAtmMIB 1 }
|
|
pwAtmConformance OBJECT IDENTIFIER ::= { pwAtmMIB 2 }
|
|
|
|
-- ATM PW PSN Bound(Outbound) Table for 1 to 1 connection
|
|
|
|
pwAtmOutboundTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwAtmOutboundEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the information for an ATM PW to
|
|
be carried over the PSN in the outbound direction. An
|
|
entry is created in this table for every entry in
|
|
the pwTable with a pwType equal to one of the following:
|
|
atmAal5SduVcc(2), atmCell1to1Vcc(12), atmCell1to1Vpc(13)
|
|
or atmAal5PduVcc(14), or atmTransparent(3)."
|
|
::= { pwAtmObjects 1 }
|
|
|
|
pwAtmOutboundEntry OBJECT-TYPE
|
|
SYNTAX PwAtmOutboundEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents an ATM PW that needs to be
|
|
adapted and carried over the PSN. This table is indexed by
|
|
|
|
pwIndex from pwTable. Unless otherwise specified, all
|
|
writeable objects in this table MUST NOT be changed after
|
|
row activation in the generic pwTable, and values must
|
|
persist after reboot."
|
|
REFERENCE
|
|
"See [PWMIB]."
|
|
INDEX { pwIndex }
|
|
::= { pwAtmOutboundTable 1 }
|
|
|
|
PwAtmOutboundEntry ::= SEQUENCE {
|
|
pwAtmOutboundAtmIf InterfaceIndex,
|
|
pwAtmOutboundVpi AtmVpIdentifier,
|
|
pwAtmOutboundVci AtmVcIdentifier,
|
|
pwAtmOutboundTrafficParamDescr RowPointer,
|
|
pwAtmOutboundRowStatus RowStatus
|
|
}
|
|
|
|
pwAtmOutboundAtmIf OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM Interface that receives cells from the ATM
|
|
network."
|
|
::= { pwAtmOutboundEntry 1 }
|
|
|
|
pwAtmOutboundVpi OBJECT-TYPE
|
|
SYNTAX AtmVpIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI value of this ATM PW. The value may indicate the
|
|
translated value when egress generates new VPI."
|
|
::= { pwAtmOutboundEntry 2 }
|
|
|
|
pwAtmOutboundVci OBJECT-TYPE
|
|
SYNTAX AtmVcIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI value of this ATM PW. The value may indicate the
|
|
translated value when egress generates new VCI."
|
|
::= { pwAtmOutboundEntry 3 }
|
|
|
|
pwAtmOutboundTrafficParamDescr OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents a pointer to an ATM
|
|
traffic-parameter-specific row in either a private or
|
|
standard table that will be employed while receiving
|
|
cells from the ATM network. This row should contain a
|
|
set of self-consistent ATM traffic parameters including
|
|
the ATM traffic service category.
|
|
A value of 0.0 indicates Best Effort."
|
|
::= { pwAtmOutboundEntry 4 }
|
|
|
|
pwAtmOutboundRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create, modify, or delete a row in
|
|
this table. Unless otherwise specified, all writeable
|
|
objects in this table MUST NOT be changed after row
|
|
activation as explained in the pwAtmOutboundEntry. "
|
|
::= { pwAtmOutboundEntry 5 }
|
|
|
|
-- End of ATM PW Outbound Table
|
|
|
|
-- ATM PW CE Bound(Inbound) Table for 1 to 1 mode
|
|
|
|
pwAtmInboundTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwAtmInboundEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the information for an ATM PW in the
|
|
inbound direction."
|
|
::= { pwAtmObjects 3 }
|
|
|
|
pwAtmInboundEntry OBJECT-TYPE
|
|
SYNTAX PwAtmInboundEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents an ATM PW that needs to be
|
|
sent into the ATM network after reconstructing cells from
|
|
packets received from a PSN. This table is indexed by
|
|
pwIndex from pwTable. An entry is created in this table
|
|
for every entry in the pwTable with a
|
|
pwType equal to one of the following:
|
|
atmAal5SduVcc(2), atmCell1to1Vcc(12), atmCell1to1Vpc(13),
|
|
atmAal5PduVcc(14), or atmTransparent(3). Unless otherwise
|
|
|
|
specified, all writeable objects in this table MUST NOT
|
|
be changed after row activation in the generic pwTable,
|
|
and values must persist after reboot."
|
|
REFERENCE
|
|
"See [PWMIB]."
|
|
INDEX { pwIndex }
|
|
::= { pwAtmInboundTable 1 }
|
|
|
|
PwAtmInboundEntry ::= SEQUENCE {
|
|
pwAtmInboundAtmIf InterfaceIndex,
|
|
pwAtmInboundVpi AtmVpIdentifier,
|
|
pwAtmInboundVci AtmVcIdentifier,
|
|
pwAtmInboundTrafficParamDescr RowPointer,
|
|
pwAtmInboundRowStatus RowStatus
|
|
}
|
|
|
|
pwAtmInboundAtmIf OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM Interface that sends cells into the ATM network
|
|
after reconstructing cells from packets received from
|
|
a PSN."
|
|
::= { pwAtmInboundEntry 1 }
|
|
|
|
pwAtmInboundVpi OBJECT-TYPE
|
|
SYNTAX AtmVpIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI value of this ATM PW.
|
|
If the pwType is atmTransparent, then the value will
|
|
be set to zero."
|
|
::= { pwAtmInboundEntry 2 }
|
|
|
|
pwAtmInboundVci OBJECT-TYPE
|
|
SYNTAX AtmVcIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI value of this ATM PW.
|
|
If the pwType is atmTransparent, atmCell1to1Vpc, or
|
|
atmCellNto1Vpc, then the value will be set to zero."
|
|
::= { pwAtmInboundEntry 3 }
|
|
|
|
pwAtmInboundTrafficParamDescr OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents a pointer to an ATM traffic-parameter-
|
|
specific row in either a private or standard table that will
|
|
be employed while transmitting into the ATM network. This
|
|
table contains a set of self-consistent ATM traffic parameters
|
|
including the ATM traffic service category. A value of 0.0
|
|
indicates Best Effort."
|
|
::= { pwAtmInboundEntry 4 }
|
|
|
|
pwAtmInboundRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create, modify, or delete a row in
|
|
this table. Unless otherwise specified, all writeable
|
|
objects in this table MUST NOT be changed after row
|
|
activation as explained in the pwAtmInboundEntry. "
|
|
::= { pwAtmInboundEntry 5 }
|
|
|
|
-- End of ATM PW Inbound Table
|
|
|
|
--Generic ATM PW table for all types of ATM PW connection.
|
|
|
|
pwAtmCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwAtmCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies generic information for an ATM PW
|
|
to be carried over PSN in any mode."
|
|
::= { pwAtmObjects 5 }
|
|
|
|
pwAtmCfgEntry OBJECT-TYPE
|
|
SYNTAX PwAtmCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a set of parameters for
|
|
the ATM PW that needs to be adapted and carried
|
|
over the PSN. This table is indexed by pwIndex from
|
|
pwTable. An entry is created for every new ATM
|
|
type associated pwIndex in the pwTable. Unless
|
|
otherwise specified, all read-write objects in
|
|
|
|
this table MAY be changed when the PW is defined
|
|
as not active, and all RW objects values must
|
|
persist after reboot."
|
|
REFERENCE
|
|
"See [PWMIB]."
|
|
INDEX { pwIndex }
|
|
::= { pwAtmCfgTable 1 }
|
|
|
|
PwAtmCfgEntry ::= SEQUENCE {
|
|
pwAtmCfgMaxCellConcatenation Unsigned32,
|
|
pwAtmCfgFarEndMaxCellConcatenation Unsigned32,
|
|
pwAtmCfgTimeoutMode INTEGER,
|
|
pwAtmClpQosMapping TruthValue
|
|
}
|
|
|
|
pwAtmCfgMaxCellConcatenation OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..29)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of ATM cells that can be
|
|
concatenated into one PW packet towards the PSN.
|
|
In a non-LDP or other signaling protocol environment,
|
|
this object MAY be changed at anytime, but traffic
|
|
might be interrupted; otherwise, it may be changed
|
|
when PW is not active."
|
|
::= { pwAtmCfgEntry 1 }
|
|
|
|
pwAtmCfgFarEndMaxCellConcatenation OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..29)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of ATM cells that can be
|
|
concatenated into one PW packet towards PSN as reported by
|
|
the far end. If there is no LDP in use, the object will
|
|
either return a value of 0 or allow setting it for calculating
|
|
protocol overhead."
|
|
::= { pwAtmCfgEntry 2 }
|
|
|
|
pwAtmCfgTimeoutMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (1),
|
|
disabled (2),
|
|
enabled (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determines whether or not a packet can be
|
|
transmitted to the PSN based on timeout expiration
|
|
for collecting cells. The actual handling of the
|
|
timeout is implementation-specific; as such,
|
|
this object may be changed at any time under proper
|
|
consideration of the traffic interruption effect."
|
|
::= { pwAtmCfgEntry 3 }
|
|
|
|
pwAtmClpQosMapping OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the Cell Loss Priority
|
|
(CLP) bits should be considered when setting the
|
|
value in the Quality-of-Service fields of the
|
|
encapsulating protocol (e.g., EXP fields of the
|
|
MPLS Label Stack). Selecting True allows the drop
|
|
precedence to be preserved across the PSN. In
|
|
transparent cell transport, the value of this object
|
|
MUST be false(2); in other cases, it can be changed
|
|
at any time."
|
|
REFERENCE
|
|
"See section 12 of [ATMENCAP]."
|
|
::= { pwAtmCfgEntry 4 }
|
|
|
|
-- Device capable of implementing N:1, 1:1, and transparent cell
|
|
-- mode assumes to support the N:1 table for all
|
|
-- modes with respective applicable setting.
|
|
-- In such implementation, user can create an entry for either
|
|
-- 1:1 or transparent cell transport modes only
|
|
-- in pwAtmInboundNto1Table. The side effect of such
|
|
-- will be an automatic create of the respective line in the
|
|
-- pwAtmOutboundNto1Table.
|
|
|
|
-- ATM PW Outbound Table for N to 1 connection
|
|
|
|
pwAtmOutboundNto1Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwAtmOutboundNto1Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the information for an ATM PW to
|
|
be carried over the PSN in the outbound direction. Up to
|
|
N entries can be created in this table for every
|
|
|
|
entry in the pwTable with a pwType equal to:
|
|
atmCellNto1Vcc(9) or atmCellNto1Vpc(10).
|
|
An entry can be created only when the VP/VC are known.
|
|
A single entry will be created in this table for every
|
|
entry in the pwTable with a pwType equal to
|
|
one of the following: atmCell1to1Vcc(12),
|
|
atmCell1to1Vpc(13), atmAal5PduVcc(14),
|
|
atmAal5SduVcc(2), or atmTransparent(3).
|
|
"
|
|
::= { pwAtmObjects 6 }
|
|
|
|
pwAtmOutboundNto1Entry OBJECT-TYPE
|
|
SYNTAX PwAtmOutboundNto1Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents an ATM PW that needs to be
|
|
adapted and carried over PSN. This table is indexed by
|
|
pwIndex from pwTable and the ATM interface with VPL/VCLs.
|
|
In atmTransparent(3), Vpi and VCi will be 0xFFFF
|
|
during set operation.
|
|
Unless otherwise specified, all read-create objects in this
|
|
table MUST NOT be changed after row activation
|
|
and SHOULD remain unchanged after reboot."
|
|
INDEX { pwIndex, pwAtmOutboundNto1AtmIf ,
|
|
pwAtmOutboundNto1Vpi,
|
|
pwAtmOutboundNto1Vci }
|
|
::= { pwAtmOutboundNto1Table 1 }
|
|
|
|
PwAtmOutboundNto1Entry ::= SEQUENCE {
|
|
pwAtmOutboundNto1AtmIf InterfaceIndex,
|
|
pwAtmOutboundNto1Vpi AtmVpIdentifier,
|
|
pwAtmOutboundNto1Vci AtmVcIdentifier,
|
|
pwAtmOutboundNto1RowStatus RowStatus,
|
|
pwAtmOutboundNto1TrafficParamDescr RowPointer,
|
|
pwAtmOutboundNto1MappedVpi AtmVpIdentifier,
|
|
pwAtmOutboundNto1MappedVci AtmVcIdentifier
|
|
}
|
|
|
|
pwAtmOutboundNto1AtmIf OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM Interface that receives cells from the ATM network."
|
|
::= { pwAtmOutboundNto1Entry 1 }
|
|
|
|
pwAtmOutboundNto1Vpi OBJECT-TYPE
|
|
SYNTAX AtmVpIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI value of this ATM PW. In atmTransparent(3),
|
|
Vpi will be the equivalent of 0xFFFF."
|
|
::= { pwAtmOutboundNto1Entry 2 }
|
|
|
|
pwAtmOutboundNto1Vci OBJECT-TYPE
|
|
SYNTAX AtmVcIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI value of this ATM PW. In atmTransparent(3), or
|
|
the VP case, the value will be the equivalent of
|
|
0xFFFF."
|
|
::= { pwAtmOutboundNto1Entry 3 }
|
|
|
|
pwAtmOutboundNto1RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create, modify or delete a row in
|
|
this table."
|
|
::= { pwAtmOutboundNto1Entry 4 }
|
|
|
|
pwAtmOutboundNto1TrafficParamDescr OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents a pointer to an ATM traffic-parameter-
|
|
specific row in either private or standard table that will
|
|
be employed while receiving cells from the ATM network.
|
|
This table should contain a set
|
|
of self-consistent ATM traffic parameters including the ATM
|
|
traffic service category. A value of 0.0 indicates Best
|
|
Effort."
|
|
::= { pwAtmOutboundNto1Entry 5 }
|
|
|
|
pwAtmOutboundNto1MappedVpi OBJECT-TYPE
|
|
SYNTAX AtmVpIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The egress-generated VPI value of this ATM PW. The
|
|
|
|
entry is valid for PW type of atmCellNto1Vcc(9),
|
|
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
|
|
atmCell1to1Vpc(13). In other types, the value will be the
|
|
equivalent of 0xFFFF. Value MAY be changed when the
|
|
PW is defined as not active. "
|
|
::= { pwAtmOutboundNto1Entry 6 }
|
|
|
|
pwAtmOutboundNto1MappedVci OBJECT-TYPE
|
|
SYNTAX AtmVcIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The egress-generated VCI value of this ATM PW. The
|
|
entry is valid for PW type of atmCellNto1Vcc(9),
|
|
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
|
|
atmCell1to1Vpc(13. In the VP case or other types, the
|
|
value will be the equivalent of 0xFFFF.
|
|
Value MAY be changed when the PW is defined
|
|
as not active."
|
|
::= { pwAtmOutboundNto1Entry 7 }
|
|
|
|
-- ATM PW Inbound Table for N to 1 connection
|
|
|
|
pwAtmInboundNto1Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwAtmInboundNto1Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the information for an ATM PW to
|
|
be carried over PSN in the Inbound direction. Up to
|
|
N entries can be created in this table for every
|
|
entry in the pwTable with a pwType equal to:
|
|
atmCellNto1Vcc(9) or atmCellNto1Vpc(10).
|
|
An entry can be created only when the VP/VC are known.
|
|
A single entry will be created in this table for every
|
|
entry in the pwTable with a pwType equal to
|
|
one of the following: atmCell1to1Vcc(12),
|
|
atmCell1to1Vpc(13), atmAal5PduVcc(14),
|
|
atmAal5SduVcc(2), or atmTransparent(3)."
|
|
::= { pwAtmObjects 7 }
|
|
|
|
pwAtmInboundNto1Entry OBJECT-TYPE
|
|
SYNTAX PwAtmInboundNto1Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents an ATM PW that needs to be
|
|
adapted and carried over PSN. This table is indexed by
|
|
|
|
pwIndex from pwTable and the ATM interface with VPL/VCLs.
|
|
In atmTransparent(3), Vpi and VCi will be 0xFFFF
|
|
during set operation.
|
|
Unless otherwise specified, all Read-Create objects in this
|
|
table MUST NOT be changed after row activation
|
|
and SHOULD remain unchanged after reboot."
|
|
INDEX { pwIndex, pwAtmInboundNto1AtmIf ,
|
|
pwAtmInboundNto1Vpi,
|
|
pwAtmInboundNto1Vci
|
|
}
|
|
::= { pwAtmInboundNto1Table 1 }
|
|
|
|
PwAtmInboundNto1Entry ::= SEQUENCE {
|
|
pwAtmInboundNto1AtmIf InterfaceIndex,
|
|
pwAtmInboundNto1Vpi AtmVpIdentifier,
|
|
pwAtmInboundNto1Vci AtmVcIdentifier,
|
|
pwAtmInboundNto1RowStatus RowStatus,
|
|
pwAtmInboundNto1TrafficParamDescr RowPointer,
|
|
pwAtmInboundNto1MappedVpi AtmVpIdentifier,
|
|
pwAtmInboundNto1MappedVci AtmVcIdentifier
|
|
}
|
|
|
|
pwAtmInboundNto1AtmIf OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM Interface that receives cells from the ATM network."
|
|
::= { pwAtmInboundNto1Entry 1 }
|
|
|
|
pwAtmInboundNto1Vpi OBJECT-TYPE
|
|
SYNTAX AtmVpIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI value of this ATM PW. In atmTransparent(3),
|
|
Vpi will be the equivalent of 0xFFFF."
|
|
::= { pwAtmInboundNto1Entry 2 }
|
|
|
|
pwAtmInboundNto1Vci OBJECT-TYPE
|
|
SYNTAX AtmVcIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI value of this ATM PW. In atmTransparent(3), or
|
|
the VP case, the value will be the equivalent of
|
|
0xFFFF."
|
|
::= { pwAtmInboundNto1Entry 3 }
|
|
|
|
pwAtmInboundNto1RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create, modify, or delete a row in
|
|
this table."
|
|
::= { pwAtmInboundNto1Entry 4 }
|
|
|
|
pwAtmInboundNto1TrafficParamDescr OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents a pointer to an ATM traffic-parameter-
|
|
specific row in either a private or standard table that will
|
|
be employed while receiving cells from the ATM network.
|
|
This table should contain a set
|
|
of self-consistent ATM traffic parameters including the ATM
|
|
traffic service category. A value of 0.0 indicates Best
|
|
Effort."
|
|
::= { pwAtmInboundNto1Entry 5 }
|
|
|
|
pwAtmInboundNto1MappedVpi OBJECT-TYPE
|
|
SYNTAX AtmVpIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The generated VPI value of this ATM PW. The
|
|
entry is valid for PW type of atmCellNto1Vcc(9),
|
|
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
|
|
atmCell1to1Vpc(13). In other types, the value will be the
|
|
equivalent of 0xFFFF. Value MAY be changed when the
|
|
PW is defined as not active."
|
|
::= { pwAtmInboundNto1Entry 6 }
|
|
|
|
pwAtmInboundNto1MappedVci OBJECT-TYPE
|
|
SYNTAX AtmVcIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The generated VCI value of this ATM PW. The
|
|
entry is valid for PW type of atmCellNto1Vcc(9),
|
|
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
|
|
atmCell1to1Vpc(13. In the VP case or other types, the
|
|
value will be the equivalent of 0xFFFF.
|
|
Value MAY be changed when the
|
|
|
|
PW is defined as not active."
|
|
::= { pwAtmInboundNto1Entry 7 }
|
|
|
|
-- ATM PW Outbound Perf Table
|
|
|
|
-- The following supplement the counters presented in the
|
|
-- PW generic MIB
|
|
|
|
-- ATM PW Performance Current Table.
|
|
|
|
pwAtmPerfCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwAtmPerfCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current 15-minute interval counts are in
|
|
this table.
|
|
This table provides performance information per ATM PW."
|
|
::= { pwAtmObjects 8 }
|
|
|
|
pwAtmPerfCurrentEntry OBJECT-TYPE
|
|
SYNTAX PwAtmPerfCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by the agent for every
|
|
pwAtmCfgTable entry. After 15 minutes, the contents of this
|
|
table entry are copied to a new entry in the
|
|
pwAtmPerfInterval table and the counts in this entry
|
|
are reset to zero."
|
|
INDEX { pwIndex }
|
|
::= { pwAtmPerfCurrentTable 1 }
|
|
|
|
PwAtmPerfCurrentEntry ::= SEQUENCE {
|
|
pwAtmPerfCurrentMissingPkts PerfCurrentCount,
|
|
pwAtmPerfCurrentPktsReOrder PerfCurrentCount,
|
|
pwAtmPerfCurrentPktsMisOrder PerfCurrentCount,
|
|
pwAtmPerfCurrentPktsTimeout PerfCurrentCount,
|
|
pwAtmPerfCurrentCellsXmit PerfCurrentCount,
|
|
pwAtmPerfCurrentCellsDropped PerfCurrentCount,
|
|
pwAtmPerfCurrentCellsReceived PerfCurrentCount,
|
|
pwAtmPerfCurrentUnknownCells PerfCurrentCount
|
|
}
|
|
|
|
pwAtmPerfCurrentMissingPkts OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of missing packets (as detected via control word
|
|
sequence number gaps)."
|
|
::= { pwAtmPerfCurrentEntry 1 }
|
|
|
|
pwAtmPerfCurrentPktsReOrder OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of sequence (via control
|
|
word sequence number), but successfully re-ordered.
|
|
Note: some implementations may not support this feature."
|
|
::= { pwAtmPerfCurrentEntry 2 }
|
|
|
|
pwAtmPerfCurrentPktsMisOrder OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of order (via control word
|
|
sequence numbers)."
|
|
::= { pwAtmPerfCurrentEntry 3 }
|
|
|
|
pwAtmPerfCurrentPktsTimeout OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets transmitted due to timeout expiration
|
|
while attempting to collect cells."
|
|
::= { pwAtmPerfCurrentEntry 4 }
|
|
|
|
pwAtmPerfCurrentCellsXmit OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of transmitted cells."
|
|
::= { pwAtmPerfCurrentEntry 5 }
|
|
|
|
pwAtmPerfCurrentCellsDropped OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of dropped cells."
|
|
::= { pwAtmPerfCurrentEntry 6 }
|
|
|
|
pwAtmPerfCurrentCellsReceived OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of received cells."
|
|
::= { pwAtmPerfCurrentEntry 7 }
|
|
|
|
pwAtmPerfCurrentUnknownCells OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of cells received from the PSN with unknown VPI or
|
|
VCI values. This object is relevant only in N:1 mode."
|
|
::= { pwAtmPerfCurrentEntry 8 }
|
|
|
|
-- End ATM PW Performance Current Interval Table
|
|
|
|
-- ATM PW Performance Interval Table.
|
|
|
|
pwAtmPerfIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwAtmPerfIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides performance information per ATM PW
|
|
similar to the pwAtmPerfCurrentTable above. However,
|
|
these counts represent historical 15 minute intervals.
|
|
Typically, this table will have a maximum of 96 entries
|
|
for a 24 hour period. "
|
|
::= { pwAtmObjects 9 }
|
|
|
|
pwAtmPerfIntervalEntry OBJECT-TYPE
|
|
SYNTAX PwAtmPerfIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by the agent for
|
|
every pwAtmPerfCurrentEntry that is 15 minutes old.
|
|
The contents of the Current entry are copied to the new
|
|
entry here. The Current entry then resets its counts
|
|
to zero for the next current 15 minute interval. "
|
|
INDEX { pwIndex, pwAtmPerfIntervalNumber }
|
|
::= { pwAtmPerfIntervalTable 1 }
|
|
|
|
PwAtmPerfIntervalEntry ::= SEQUENCE {
|
|
pwAtmPerfIntervalNumber Unsigned32,
|
|
pwAtmPerfIntervalValidData TruthValue,
|
|
pwAtmPerfIntervalDuration Unsigned32,
|
|
pwAtmPerfIntervalMissingPkts PerfIntervalCount,
|
|
pwAtmPerfIntervalPktsReOrder PerfIntervalCount,
|
|
pwAtmPerfIntervalPktsMisOrder PerfIntervalCount,
|
|
pwAtmPerfIntervalPktsTimeout PerfIntervalCount,
|
|
pwAtmPerfIntervalCellsXmit PerfIntervalCount,
|
|
pwAtmPerfIntervalCellsDropped PerfIntervalCount,
|
|
pwAtmPerfIntervalCellsReceived PerfIntervalCount,
|
|
pwAtmPerfIntervalUnknownCells PerfIntervalCount
|
|
}
|
|
|
|
pwAtmPerfIntervalNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number (normally between 1 and 96 to cover a 24 hour
|
|
period) that identifies the interval for which the set
|
|
of statistics is available. The interval identified by 1
|
|
is the most recently completed 15 minute interval, and
|
|
the interval identified by N is the interval immediately
|
|
preceding the one identified by N-1. The minimum range of
|
|
N is 1 through 4. The default range is 1 through 32. The
|
|
maximum value of N is 96."
|
|
::= { pwAtmPerfIntervalEntry 1 }
|
|
|
|
pwAtmPerfIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this interval
|
|
is valid."
|
|
::= { pwAtmPerfIntervalEntry 2 }
|
|
|
|
pwAtmPerfIntervalDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The duration of a particular interval in seconds.
|
|
Adjustments in the system's time-of-day clock, may
|
|
cause the interval to be greater or less than the
|
|
normal value. Therefore, this actual interval value
|
|
is provided."
|
|
::= { pwAtmPerfIntervalEntry 3 }
|
|
|
|
pwAtmPerfIntervalMissingPkts OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of missing packets (as detected via control
|
|
word sequence number gaps)."
|
|
::= { pwAtmPerfIntervalEntry 4 }
|
|
|
|
pwAtmPerfIntervalPktsReOrder OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of sequence (via control
|
|
word sequence number), but successfully re-ordered.
|
|
Note: some implementations may not support this
|
|
feature."
|
|
::= { pwAtmPerfIntervalEntry 5 }
|
|
|
|
pwAtmPerfIntervalPktsMisOrder OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of order (via control word
|
|
sequence numbers)."
|
|
::= { pwAtmPerfIntervalEntry 6 }
|
|
|
|
pwAtmPerfIntervalPktsTimeout OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets transmitted due to timeout expiration."
|
|
::= { pwAtmPerfIntervalEntry 7 }
|
|
|
|
pwAtmPerfIntervalCellsXmit OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of transmitted cells."
|
|
::= { pwAtmPerfIntervalEntry 8 }
|
|
|
|
pwAtmPerfIntervalCellsDropped OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of dropped cells."
|
|
::= { pwAtmPerfIntervalEntry 9 }
|
|
|
|
pwAtmPerfIntervalCellsReceived OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of received cells."
|
|
::= { pwAtmPerfIntervalEntry 10 }
|
|
|
|
pwAtmPerfIntervalUnknownCells OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of cells received from the PSN with unknown VPI or
|
|
VCI values. This object is relevant only in N:1 mode."
|
|
::= { pwAtmPerfIntervalEntry 11 }
|
|
|
|
-- End ATM PW Performance Interval Table
|
|
|
|
-- ATM PW 1day Performance Table
|
|
|
|
pwAtmPerf1DayIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PwAtmPerf1DayIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides performance information per ATM PW
|
|
similar to the pwAtmPerfIntervalTable above. However,
|
|
these counters represent historical one-day intervals up to
|
|
one full month."
|
|
::= { pwAtmObjects 10 }
|
|
|
|
pwAtmPerf1DayIntervalEntry OBJECT-TYPE
|
|
SYNTAX PwAtmPerf1DayIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is created in this table by the agent
|
|
for every entry in the pwAtmCfgTable table."
|
|
INDEX { pwIndex,pwAtmPerf1DayIntervalNumber }
|
|
::= { pwAtmPerf1DayIntervalTable 1 }
|
|
|
|
PwAtmPerf1DayIntervalEntry ::= SEQUENCE {
|
|
|
|
pwAtmPerf1DayIntervalNumber Unsigned32,
|
|
pwAtmPerf1DayIntervalValidData TruthValue,
|
|
pwAtmPerf1DayIntervalDuration Unsigned32,
|
|
pwAtmPerf1DayIntervalMissingPkts Counter32,
|
|
pwAtmPerf1DayIntervalPktsReOrder Counter32,
|
|
pwAtmPerf1DayIntervalPktsMisOrder Counter32,
|
|
pwAtmPerf1DayIntervalPktsTimeout Counter32,
|
|
pwAtmPerf1DayIntervalCellsXmit Counter32,
|
|
pwAtmPerf1DayIntervalCellsDropped Counter32,
|
|
pwAtmPerf1DayIntervalCellsReceived Counter32,
|
|
pwAtmPerf1DayIntervalUnknownCells Counter32
|
|
}
|
|
|
|
pwAtmPerf1DayIntervalNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..365)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals, where 1 indicates current day
|
|
measured period and 2 and above indicate previous days,
|
|
respectively."
|
|
::= { pwAtmPerf1DayIntervalEntry 1 }
|
|
|
|
pwAtmPerf1DayIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if the data for this interval
|
|
is valid."
|
|
::= { pwAtmPerf1DayIntervalEntry 2 }
|
|
|
|
pwAtmPerf1DayIntervalDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The duration of a particular interval in seconds.
|
|
Adjustments in the system's time-of-day clock may
|
|
cause the interval to be greater or less than the
|
|
normal value. Therefore, this actual interval value
|
|
is provided."
|
|
::= { pwAtmPerf1DayIntervalEntry 3 }
|
|
|
|
pwAtmPerf1DayIntervalMissingPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of missing packets (as detected via control word
|
|
sequence number gaps)."
|
|
::= { pwAtmPerf1DayIntervalEntry 4 }
|
|
|
|
pwAtmPerf1DayIntervalPktsReOrder OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of sequence (via control
|
|
word sequence number), but successfully re-ordered.
|
|
Note: some implementations may not support this
|
|
feature."
|
|
::= { pwAtmPerf1DayIntervalEntry 5 }
|
|
|
|
pwAtmPerf1DayIntervalPktsMisOrder OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets detected out of order (via control word
|
|
sequence numbers) and that could not be re-ordered."
|
|
::= { pwAtmPerf1DayIntervalEntry 6 }
|
|
|
|
pwAtmPerf1DayIntervalPktsTimeout OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets transmitted due to timeout expiration."
|
|
::= { pwAtmPerf1DayIntervalEntry 7 }
|
|
|
|
pwAtmPerf1DayIntervalCellsXmit OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of transmitted cells."
|
|
::= { pwAtmPerf1DayIntervalEntry 8 }
|
|
|
|
pwAtmPerf1DayIntervalCellsDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of dropped cells."
|
|
::= { pwAtmPerf1DayIntervalEntry 9 }
|
|
|
|
pwAtmPerf1DayIntervalCellsReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of received cells."
|
|
::= { pwAtmPerf1DayIntervalEntry 10 }
|
|
|
|
pwAtmPerf1DayIntervalUnknownCells OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of cells received from the PSN with unknown VPI
|
|
or VCI values. This object is relevant only in N:1 mode."
|
|
::= { pwAtmPerf1DayIntervalEntry 11 }
|
|
|
|
-- End of ATM PW Performance table
|
|
|
|
pwAtmCompliances OBJECT IDENTIFIER ::= { pwAtmConformance 1 }
|
|
pwAtmGroups OBJECT IDENTIFIER ::= { pwAtmConformance 2 }
|
|
pwAtmCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for agents that support
|
|
ATM PW."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { pwAtmCfgGroup,
|
|
pwAtmPerfGroup
|
|
}
|
|
|
|
OBJECT pwAtmCfgFarEndMaxCellConcatenation
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The ability to set this object
|
|
is not required."
|
|
|
|
GROUP pwAtmOutbound1to1Group
|
|
DESCRIPTION "This group is mandatory only for implementations
|
|
that support the ATM PW 1:1 mode and not using
|
|
the Nto1 table."
|
|
|
|
GROUP pwAtmInbound1to1Group
|
|
DESCRIPTION "This group is mandatory only for implementations
|
|
that support the ATM PW 1:1 mode and not using
|
|
the Nto1 table."
|
|
|
|
GROUP pwAtmOutboundNto1Group
|
|
DESCRIPTION "This group is mandatory only for implementations
|
|
that support the ATM PW N:1 and transparent mode."
|
|
|
|
GROUP pwAtmInboundNto1Group
|
|
DESCRIPTION "This group is mandatory only for implementations
|
|
that support the ATM PW N:1 and transparent mode."
|
|
::= { pwAtmCompliances 2 }
|
|
|
|
-- Units of conformance.
|
|
|
|
pwAtmCfgGroup OBJECT-GROUP
|
|
OBJECTS {pwAtmCfgMaxCellConcatenation,
|
|
pwAtmCfgFarEndMaxCellConcatenation,
|
|
pwAtmCfgTimeoutMode,
|
|
pwAtmClpQosMapping
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for basic ATM PW
|
|
configuration."
|
|
::= { pwAtmGroups 5 }
|
|
|
|
pwAtmPerfGroup OBJECT-GROUP
|
|
OBJECTS {pwAtmPerfCurrentMissingPkts,
|
|
pwAtmPerfCurrentPktsReOrder,
|
|
pwAtmPerfCurrentPktsMisOrder,
|
|
pwAtmPerfCurrentPktsTimeout,
|
|
pwAtmPerfCurrentCellsXmit,
|
|
pwAtmPerfCurrentCellsDropped,
|
|
pwAtmPerfCurrentCellsReceived,
|
|
pwAtmPerfCurrentUnknownCells,
|
|
pwAtmPerfIntervalValidData,
|
|
pwAtmPerfIntervalDuration,
|
|
pwAtmPerfIntervalMissingPkts,
|
|
pwAtmPerfIntervalPktsReOrder,
|
|
pwAtmPerfIntervalPktsMisOrder,
|
|
pwAtmPerfIntervalPktsTimeout,
|
|
pwAtmPerfIntervalCellsXmit,
|
|
pwAtmPerfIntervalCellsDropped,
|
|
pwAtmPerfIntervalCellsReceived,
|
|
pwAtmPerfIntervalUnknownCells,
|
|
pwAtmPerf1DayIntervalValidData,
|
|
pwAtmPerf1DayIntervalDuration,
|
|
pwAtmPerf1DayIntervalMissingPkts,
|
|
pwAtmPerf1DayIntervalPktsReOrder,
|
|
pwAtmPerf1DayIntervalPktsMisOrder,
|
|
pwAtmPerf1DayIntervalPktsTimeout,
|
|
pwAtmPerf1DayIntervalCellsXmit,
|
|
pwAtmPerf1DayIntervalCellsDropped,
|
|
pwAtmPerf1DayIntervalCellsReceived,
|
|
pwAtmPerf1DayIntervalUnknownCells
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for basic ATM PW Performance."
|
|
::= { pwAtmGroups 6 }
|
|
|
|
pwAtmOutbound1to1Group OBJECT-GROUP
|
|
OBJECTS {pwAtmOutboundAtmIf,
|
|
pwAtmOutboundVpi,
|
|
pwAtmOutboundVci,
|
|
pwAtmOutboundTrafficParamDescr,
|
|
pwAtmOutboundRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for basic 1:1 ATM PW outbound
|
|
configuration."
|
|
::= { pwAtmGroups 7 }
|
|
|
|
pwAtmInbound1to1Group OBJECT-GROUP
|
|
OBJECTS {pwAtmInboundAtmIf,
|
|
pwAtmInboundVpi,
|
|
pwAtmInboundVci,
|
|
pwAtmInboundTrafficParamDescr,
|
|
pwAtmInboundRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for basic 1:1 ATM PW inbound
|
|
configuration."
|
|
::= { pwAtmGroups 8 }
|
|
|
|
pwAtmOutboundNto1Group OBJECT-GROUP
|
|
OBJECTS {pwAtmOutboundNto1RowStatus,
|
|
pwAtmOutboundNto1TrafficParamDescr,
|
|
pwAtmOutboundNto1MappedVpi,
|
|
pwAtmOutboundNto1MappedVci
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for N:1, 1:1, or transparent
|
|
ATM PW outbound configuration."
|
|
::= { pwAtmGroups 9 }
|
|
|
|
pwAtmInboundNto1Group OBJECT-GROUP
|
|
OBJECTS {pwAtmInboundNto1RowStatus,
|
|
pwAtmInboundNto1TrafficParamDescr,
|
|
pwAtmInboundNto1MappedVpi,
|
|
pwAtmInboundNto1MappedVci
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for N:1, 1:1, or transparent
|
|
ATM PW inbound configuration."
|
|
::= { pwAtmGroups 10 }
|
|
|
|
END
|