967 lines
34 KiB
Plaintext
967 lines
34 KiB
Plaintext
MPLS-OAM-ID-STD-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI -- RFC 2578
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- RFC 2580
|
|
RowStatus, RowPointer, StorageType
|
|
FROM SNMPv2-TC -- RFC 2579
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC 3411
|
|
IndexIntegerNextFree
|
|
FROM DIFFSERV-MIB -- RFC 3289
|
|
mplsStdMIB
|
|
FROM MPLS-TC-STD-MIB -- RFC 3811
|
|
InterfaceIndexOrZero, ifGeneralInformationGroup,
|
|
ifCounterDiscontinuityGroup
|
|
FROM IF-MIB; -- RFC 2863
|
|
|
|
mplsOamIdStdMIB MODULE-IDENTITY
|
|
LAST-UPDATED
|
|
"201601070000Z" -- January 07, 2016
|
|
ORGANIZATION
|
|
"Multiprotocol Label Switching (MPLS) Working Group"
|
|
CONTACT-INFO
|
|
"Sam Aldrin
|
|
Google, Inc.
|
|
1600 Amphitheatre Parkway
|
|
Mountain View, CA 94043
|
|
USA
|
|
Email: aldrin.ietf@gmail.com
|
|
|
|
Thomas D. Nadeau
|
|
Email: tnadeau@lucidvision.com
|
|
|
|
Venkatesan Mahalingam
|
|
Dell, Inc.
|
|
5450 Great America Parkway
|
|
Santa Clara, CA 95054
|
|
USA
|
|
Email: venkat.mahalingams@gmail.com
|
|
|
|
Kannan KV Sampath
|
|
Redeem
|
|
India
|
|
Email: kannankvs@gmail.com
|
|
|
|
Ping Pan
|
|
Infinera
|
|
|
|
Sami Boutros
|
|
VMware, Inc.
|
|
3401 Hillview Ave.
|
|
Palo Alto, CA 94304
|
|
USA
|
|
Email: sboutros@vmware.com"
|
|
DESCRIPTION
|
|
"Copyright (c) 2016 IETF Trust and the persons identified
|
|
as authors of the code. All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or
|
|
without modification, is permitted pursuant to, and subject
|
|
to the license terms contained in, the Simplified BSD
|
|
License set forth in Section 4.c of the IETF Trust's
|
|
Legal Provisions Relating to IETF Documents
|
|
(http://trustee.ietf.org/license-info).
|
|
|
|
This MIB module contains generic object definitions for
|
|
MPLS OAM identifiers."
|
|
|
|
-- Revision history
|
|
|
|
REVISION
|
|
"201601070000Z" -- January 07, 2016
|
|
DESCRIPTION
|
|
"MPLS OAM Identifiers MIB objects for Tunnels, LSPs,
|
|
Pseudowires, and Sections."
|
|
::= { mplsStdMIB 21 }
|
|
|
|
-- Top-level components of this MIB module
|
|
|
|
-- notifications
|
|
mplsOamIdNotifications
|
|
OBJECT IDENTIFIER ::= { mplsOamIdStdMIB 0 }
|
|
-- tables, scalars
|
|
mplsOamIdObjects OBJECT IDENTIFIER ::= { mplsOamIdStdMIB 1 }
|
|
|
|
-- conformance
|
|
mplsOamIdConformance
|
|
OBJECT IDENTIFIER ::= { mplsOamIdStdMIB 2 }
|
|
|
|
-- Start of MPLS Transport Profile MEG table
|
|
|
|
mplsOamIdMegIndexNext OBJECT-TYPE
|
|
SYNTAX IndexIntegerNextFree (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an unused value for
|
|
mplsOamIdMegIndex, or a zero to indicate
|
|
that none exist. Negative values are not allowed,
|
|
as they do not correspond to valid values of
|
|
mplsOamIdMegIndex."
|
|
::= { mplsOamIdObjects 1 }
|
|
|
|
mplsOamIdMegTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsOamIdMegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information about the Maintenance
|
|
Entity Groups (MEGs).
|
|
|
|
A MEG, as mentioned in the MPLS-TP OAM framework, defines
|
|
a set of one or more Maintenance Entities (MEs).
|
|
MEs define a relationship between any two points of a
|
|
transport path in an OAM domain to which maintenance and
|
|
monitoring operations apply."
|
|
::= { mplsOamIdObjects 2 }
|
|
|
|
mplsOamIdMegEntry OBJECT-TYPE
|
|
SYNTAX MplsOamIdMegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents an MPLS-TP MEG.
|
|
An entry can be created by a network administrator
|
|
or by an SNMP agent as instructed by an MPLS-TP OAM
|
|
framework.
|
|
|
|
When a new entry is created with
|
|
mplsOamIdMegOperatorType set to ipCompatible (1),
|
|
then as per RFC 6370 (MEG_ID for an LSP is LSP_ID, and
|
|
MEG_ID for a PW is PW_Path_ID), MEP_ID can be
|
|
automatically formed.
|
|
|
|
For a co-routed bidirectional LSP, MEG_ID is
|
|
A1-{Global_ID::Node_ID::Tunnel_Num}::Z9-{Global_ID::
|
|
Node_ID::Tunnel_Num}::LSP_Num.
|
|
|
|
For an associated bidirectional LSP, MEG_ID is
|
|
A1-{Global_ID::Node_ID::Tunnel_Num::LSP_Num}::
|
|
Z9-{Global_ID::Node_ID::Tunnel_Num::LSP_Num}.
|
|
|
|
For an LSP, MEP_ID is formed using
|
|
Global_ID::Node_ID::Tunnel_Num::LSP_Num.
|
|
|
|
For a PW, MEG_ID is formed using AGI::
|
|
A1-{Global_ID::Node_ID::AC_ID}::
|
|
Z9-{Global_ID::Node_ID::AC_ID}.
|
|
|
|
For a PW, MEP_ID is formed using
|
|
AGI::Global_ID::Node_ID::AC_ID.
|
|
|
|
MEP_ID is retrieved from the mplsOamIdMegServicePointer
|
|
object based on the mplsOamIdMegServicePointerType value.
|
|
The ICC MEG_ID for an LSP and a PW is formed using the
|
|
objects mplsOamIdMegIdIcc and mplsOamIdMegIdUmc.
|
|
|
|
MEP_ID can be formed using MEG_ID::MEP_Index."
|
|
REFERENCE
|
|
"1. RFC 5860: Requirements for Operations, Administration,
|
|
and Maintenance (OAM) in MPLS Transport Networks,
|
|
May 2010.
|
|
2. RFC 6371: Operations, Administration, and Maintenance
|
|
Framework for MPLS-Based Transport Networks,
|
|
September 2011, Section 3.
|
|
3. RFC 6370: MPLS Transport Profile (MPLS-TP) Identifiers,
|
|
September 2011.
|
|
4. RFC 6923: MPLS Transport Profile (MPLS-TP) Identifiers
|
|
Following ITU-T Conventions, May 2013."
|
|
INDEX { mplsOamIdMegIndex }
|
|
::= { mplsOamIdMegTable 1 }
|
|
|
|
MplsOamIdMegEntry ::= SEQUENCE {
|
|
mplsOamIdMegIndex Unsigned32,
|
|
mplsOamIdMegName SnmpAdminString,
|
|
mplsOamIdMegOperatorType INTEGER,
|
|
mplsOamIdMegIdCc SnmpAdminString,
|
|
mplsOamIdMegIdIcc SnmpAdminString,
|
|
mplsOamIdMegIdUmc SnmpAdminString,
|
|
mplsOamIdMegServicePointerType INTEGER,
|
|
mplsOamIdMegMpLocation INTEGER,
|
|
mplsOamIdMegPathFlow INTEGER,
|
|
mplsOamIdMegOperStatus INTEGER,
|
|
mplsOamIdMegSubOperStatus BITS,
|
|
mplsOamIdMegRowStatus RowStatus,
|
|
mplsOamIdMegStorageType StorageType
|
|
}
|
|
|
|
mplsOamIdMegIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index for the conceptual row identifying a MEG within
|
|
this MEG table. Managers should obtain new values for row
|
|
creation in this table by reading mplsOamIdMegIndexNext."
|
|
::= { mplsOamIdMegEntry 1 }
|
|
|
|
mplsOamIdMegName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..48))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each MEG has a unique name amongst all those used or
|
|
available to a service provider or operator. It
|
|
facilitates easy identification of administrative
|
|
responsibility for each MEG."
|
|
::= { mplsOamIdMegEntry 2 }
|
|
|
|
mplsOamIdMegOperatorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipCompatible (1),
|
|
iccBased (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the operator type for the MEG. Conceptual rows
|
|
having 'iccBased' as the operator type MUST have valid
|
|
values for the objects mplsOamIdMegIdIcc and
|
|
mplsOamIdMegIdUmc when the row status is active."
|
|
REFERENCE
|
|
"1. RFC 6370: MPLS Transport Profile (MPLS-TP) Identifiers,
|
|
September 2011.
|
|
2. RFC 6923: MPLS Transport Profile (MPLS-TP) Identifiers
|
|
Following ITU-T Conventions, May 2013, Section 3.1."
|
|
DEFVAL { ipCompatible }
|
|
::= { mplsOamIdMegEntry 3 }
|
|
|
|
mplsOamIdMegIdCc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..2))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Global uniqueness is assured by concatenating the ICC
|
|
with a Country Code (CC). The Country Code (alpha-2)
|
|
is a string of two alphabetic characters represented
|
|
with uppercase letters (i.e., A-Z).
|
|
|
|
This object MUST contain a non-null value if
|
|
the MplsOamIdMegOperatorType value is iccBased (2);
|
|
otherwise, a null value with octet size 0
|
|
should be assigned."
|
|
REFERENCE
|
|
"RFC 6923: MPLS Transport Profile (MPLS-TP) Identifiers
|
|
Following ITU-T Conventions, May 2013, Section 3."
|
|
DEFVAL {""}
|
|
::= { mplsOamIdMegEntry 4 }
|
|
|
|
mplsOamIdMegIdIcc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..6))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique code assigned to a network operator or service
|
|
provider; maintained by the ITU-T. This is the
|
|
ITU Carrier Code used to form the MEGID.
|
|
|
|
This object MUST contain a non-null value if
|
|
the MplsOamIdMegOperatorType value is iccBased (2);
|
|
otherwise, a null value with octet size 0
|
|
should be assigned."
|
|
REFERENCE
|
|
"RFC 6923: MPLS Transport Profile (MPLS-TP) Identifiers
|
|
Following ITU-T Conventions, May 2013, Section 3.1."
|
|
DEFVAL {""}
|
|
::= { mplsOamIdMegEntry 5 }
|
|
|
|
mplsOamIdMegIdUmc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..7))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique code assigned by a network operator or service
|
|
provider. This code is appended to mplsOamIdMegIdIcc to
|
|
form the MEGID.
|
|
This object MUST contain a non-null value if
|
|
the MplsOamIdMegOperatorType value is iccBased (2);
|
|
otherwise, a null value with octet size 0
|
|
should be assigned."
|
|
REFERENCE
|
|
"RFC 6923: MPLS Transport Profile (MPLS-TP) Identifiers
|
|
Following ITU-T Conventions, May 2013, Section 7.1."
|
|
DEFVAL {""}
|
|
::= { mplsOamIdMegEntry 6 }
|
|
|
|
mplsOamIdMegServicePointerType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tunnel (1),
|
|
lsp (2),
|
|
pseudowire (3),
|
|
section (4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the service type for the MEG.
|
|
If the service type indicates tunnel (1), the service
|
|
pointer in the mplsOamIdMeTable points to an entry in
|
|
the point-to-point mplsTunnelTable (RFC 3812).
|
|
|
|
If the service type indicates lsp (2), the service pointer
|
|
in the mplsOamIdMeTable points to an entry in
|
|
the co-routed or associated bidirectional mplsTunnelTable.
|
|
|
|
If the value is the pseudowire (3) service type, the
|
|
service pointer in the mplsOamIdMeTable points to an entry
|
|
in the pwTable (RFC 5601).
|
|
|
|
If the value is the section (4) service type, the service
|
|
pointer in the mplsOamIdMeTable points to an entry in
|
|
the mplsTunnelTable (RFC 3812)."
|
|
REFERENCE
|
|
"1. RFC 3812: Multiprotocol Label Switching (MPLS)
|
|
Traffic Engineering (TE) Management Information
|
|
Base (MIB), June 2004.
|
|
2. RFC 5601: Pseudowire (PW) Management Information
|
|
Base (MIB), July 2009."
|
|
DEFVAL { lsp }
|
|
::= { mplsOamIdMegEntry 7 }
|
|
|
|
mplsOamIdMegMpLocation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
perNode (1),
|
|
perInterface (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the MP location type for this MEG.
|
|
|
|
If the value is perNode, then the MEG in the LSR supports
|
|
only perNode MEPs/MIPs, i.e., only one MEP/MIP in an LSR.
|
|
|
|
If the value is perInterface, then the MEG in the LSR
|
|
supports perInterface MEPs/MIPs, i.e., two MEPs/MIPs in
|
|
an LSR."
|
|
REFERENCE
|
|
"RFC 6371: Operations, Administration, and Maintenance
|
|
Framework for MPLS-Based Transport Networks,
|
|
September 2011."
|
|
DEFVAL { perNode }
|
|
::= { mplsOamIdMegEntry 8 }
|
|
|
|
mplsOamIdMegPathFlow OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unidirectionalPointToPoint (1),
|
|
coRoutedBidirectionalPointToPoint (2),
|
|
associatedBidirectionalPointToPoint (3),
|
|
unidirectionalPointToMultiPoint (4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the transport path flow for this MEG.
|
|
In the case of a unidirectional point-to-point transport
|
|
path, a single unidirectional ME is defined to monitor it.
|
|
In the case of associated bidirectional point-to-point
|
|
transport paths, two independent unidirectional MEs are
|
|
defined to independently monitor each direction.
|
|
In the case of co-routed bidirectional point-to-point
|
|
transport paths, a single bidirectional ME is defined to
|
|
monitor both directions congruently.
|
|
In the case of unidirectional point-to-multipoint transport
|
|
paths, a single unidirectional ME for each leaf is defined
|
|
to monitor the transport path from the root to that leaf."
|
|
REFERENCE
|
|
"RFC 6371: Operations, Administration, and Maintenance
|
|
Framework for MPLS-Based Transport Networks,
|
|
September 2011."
|
|
DEFVAL { coRoutedBidirectionalPointToPoint }
|
|
::= { mplsOamIdMegEntry 9 }
|
|
|
|
mplsOamIdMegOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up (1),
|
|
down (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the operational status of the
|
|
Maintenance Entity Group (MEG). This object is used to
|
|
send the notification to the SNMP manager about the MEG.
|
|
|
|
The value up (1) indicates that the MEG and its monitored
|
|
path are operationally up. The value down (2) indicates
|
|
that the MEG is operationally down.
|
|
|
|
When the value of mplsOamIdMegOperStatus is up (1),
|
|
all the bits of mplsOamIdMegSubOperStatus must be cleared.
|
|
When the value of mplsOamIdMegOperStatus is down (2),
|
|
at least one bit of mplsOamIdMegSubOperStatus must be set."
|
|
::= { mplsOamIdMegEntry 10 }
|
|
|
|
mplsOamIdMegSubOperStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
megDown (0),
|
|
meDown (1),
|
|
oamAppDown (2),
|
|
pathDown (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the reason why the MEG operational
|
|
status, as indicated by the object mplsOamIdMegOperStatus,
|
|
is down. This object is used to send the notification to
|
|
the SNMP manager about the MEG.
|
|
|
|
The bit 0 (megDown) indicates that the MEG is down.
|
|
The bit 1 (meDown) indicates that the ME table is down.
|
|
The bit 2 (oamAppDown) indicates that the OAM application
|
|
(LSP or PW) monitored by this MEG is down. Currently, BFD
|
|
|
|
is the only supported OAM application.
|
|
The bit 3 (pathDown) indicates that the underlying
|
|
LSP or PW is down."
|
|
::= { mplsOamIdMegEntry 11 }
|
|
|
|
mplsOamIdMegRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete
|
|
a row in this table. When a row in this table is in the
|
|
active(1) state, no objects in that row can be modified
|
|
by the agent except mplsOamIdMegRowStatus."
|
|
::= { mplsOamIdMegEntry 12 }
|
|
|
|
mplsOamIdMegStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this
|
|
object.
|
|
Conceptual rows having the value 'permanent'
|
|
need not allow write access to any columnar
|
|
objects in the row."
|
|
DEFVAL { volatile }
|
|
::= { mplsOamIdMegEntry 13 }
|
|
|
|
-- End of MPLS Transport Profile MEG table
|
|
|
|
-- Start of MPLS Transport Profile ME table
|
|
|
|
mplsOamIdMeIndexNext OBJECT-TYPE
|
|
SYNTAX IndexIntegerNextFree (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an unused value for
|
|
mplsOamIdMeIndex, or a zero to indicate
|
|
that none exist. Negative values are not allowed,
|
|
as they do not correspond to valid values of
|
|
mplsOamIdMeIndex."
|
|
::= { mplsOamIdObjects 3 }
|
|
|
|
mplsOamIdMeMpIndexNext OBJECT-TYPE
|
|
SYNTAX IndexIntegerNextFree (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an unused value for
|
|
mplsOamIdMeMpIndex, or a zero to indicate
|
|
that none exist. Negative values are not allowed,
|
|
as they do not correspond to valid values of
|
|
mplsOamIdMeMpIndex."
|
|
::= { mplsOamIdObjects 4 }
|
|
|
|
mplsOamIdMeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsOamIdMeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains MPLS-TP ME information.
|
|
|
|
The ME is some portion of a transport path that requires
|
|
management bounded by two points (called MEPs), and the
|
|
relationship between those points to which maintenance
|
|
and monitoring operations apply.
|
|
|
|
This table is generic enough to handle MEP and MIP
|
|
information within a MEG."
|
|
::= { mplsOamIdObjects 5 }
|
|
|
|
mplsOamIdMeEntry OBJECT-TYPE
|
|
SYNTAX MplsOamIdMeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents an MPLS-TP ME. This
|
|
entry represents the ME if the source and sink MEPs are
|
|
defined.
|
|
|
|
An ME is a point-to-point entity. One ME has two such
|
|
MEPs. A MEG is a group of one or more MEs. One MEG can
|
|
have two or more MEPs.
|
|
|
|
For a point-to-point LSP, one MEG has one ME, and this ME
|
|
is associated with two MEPs (source and sink MEPs) within
|
|
a MEG. Each mplsOamIdMeIndex value denotes the ME within
|
|
a MEG.
|
|
|
|
In the case of unidirectional point-to-point transport
|
|
paths, a single unidirectional ME is defined to monitor
|
|
it, and mplsOamIdMeServicePointer points to a
|
|
unidirectional point-to-point path.
|
|
|
|
In the case of associated bidirectional point-to-point
|
|
transport paths, two independent unidirectional
|
|
MEs are defined to independently monitor each direction,
|
|
and each mplsOamIdMeServicePointer MIB object points to a
|
|
unique unidirectional transport path.
|
|
This has implications for transactions that terminate at
|
|
or query a MIP, as a return path from a MIP to a source
|
|
MEP does not necessarily exist within the MEG.
|
|
|
|
In the case of co-routed bidirectional point-to-point
|
|
transport paths, a single bidirectional ME is defined to
|
|
monitor both directions congruently, and the
|
|
mplsOamIdMeServicePointer MIB object points to a co-routed
|
|
bidirectional point-to-point transport path.
|
|
|
|
In the case of unidirectional point-to-multipoint transport
|
|
paths, a single unidirectional ME for each leaf is defined
|
|
to monitor the transport path from the root to that leaf,
|
|
and each leaf has different transport path information in
|
|
the mplsOamIdMeServicePointer MIB object. Note that the
|
|
MplsOamIdMeEntry should be created manually once the MEG
|
|
is configured for OAM operations."
|
|
INDEX { mplsOamIdMegIndex,
|
|
mplsOamIdMeIndex,
|
|
mplsOamIdMeMpIndex
|
|
}
|
|
::= { mplsOamIdMeTable 1 }
|
|
|
|
MplsOamIdMeEntry ::= SEQUENCE {
|
|
mplsOamIdMeIndex Unsigned32,
|
|
mplsOamIdMeMpIndex Unsigned32,
|
|
mplsOamIdMeName SnmpAdminString,
|
|
mplsOamIdMeMpIfIndex InterfaceIndexOrZero,
|
|
mplsOamIdMeSourceMepIndex Unsigned32,
|
|
mplsOamIdMeSinkMepIndex Unsigned32,
|
|
mplsOamIdMeMpType INTEGER,
|
|
mplsOamIdMeMepDirection INTEGER,
|
|
mplsOamIdMeServicePointer RowPointer,
|
|
mplsOamIdMeRowStatus RowStatus,
|
|
mplsOamIdMeStorageType StorageType
|
|
}
|
|
|
|
mplsOamIdMeIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies an ME index within a MEG. Managers
|
|
should obtain new values for row creation in this table by
|
|
reading mplsOamIdMeIndexNext."
|
|
::= { mplsOamIdMeEntry 1 }
|
|
|
|
mplsOamIdMeMpIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Maintenance Point (MP) index that is used to
|
|
create multiple MEPs in a node of a single ME. The value
|
|
of this object can be the MEP index or the MIP index.
|
|
Managers should obtain new values for row creation in this
|
|
table by reading mplsOamIdMeMpIndexNext."
|
|
::= { mplsOamIdMeEntry 2 }
|
|
|
|
mplsOamIdMeName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..48))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object denotes the ME name. Each ME has a unique
|
|
name within a MEG."
|
|
::= { mplsOamIdMeEntry 3 }
|
|
|
|
mplsOamIdMeMpIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the MP interface.
|
|
If the mplsOamIdMegMpLocation object value
|
|
is perNode (1), the MP interface index should point
|
|
to the incoming interface or outgoing interface, or
|
|
be zero (to indicate that the MP OAM packets are initiated
|
|
from the forwarding engine).
|
|
|
|
If the mplsOamIdMegMpLocation object value is
|
|
perInterface (2), the MP interface index should point to
|
|
the incoming interface or outgoing interface."
|
|
REFERENCE
|
|
"1. RFC 6371: Operations, Administration, and Maintenance
|
|
Framework for MPLS-Based Transport Networks,
|
|
September 2011.
|
|
2. RFC 2863: The Interfaces Group MIB, June 2000."
|
|
DEFVAL { 0 }
|
|
::= { mplsOamIdMeEntry 4 }
|
|
|
|
mplsOamIdMeSourceMepIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the source MEP index of the ME. This object
|
|
should be configured if the mplsOamIdMegOperatorType object
|
|
in the mplsOamIdMegEntry is configured as iccBased (2).
|
|
If the MEG is configured for an IP-based operator,
|
|
the value of this object should be set to zero, and the
|
|
MEP ID will be automatically derived from the service
|
|
identifiers (MPLS-TP LSP/PW Identifier)."
|
|
DEFVAL { 0 }
|
|
::= { mplsOamIdMeEntry 5 }
|
|
|
|
mplsOamIdMeSinkMepIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the sink MEP index of the ME. This object
|
|
should be configured if the mplsOamIdMegOperatorType object
|
|
in the mplsOamIdMegEntry is configured as iccBased (2).
|
|
If the MEG is configured for an IP-based operator,
|
|
the value of this object should be set to zero, and the
|
|
MEP ID will be automatically derived from the service
|
|
identifiers (MPLS-TP LSP/PW Identifier)."
|
|
DEFVAL { 0 }
|
|
::= { mplsOamIdMeEntry 6 }
|
|
|
|
mplsOamIdMeMpType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mep (1),
|
|
mip (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the MP type within the MEG.
|
|
|
|
The object should have the value mep (1) only in the
|
|
ingress or egress nodes of the transport path.
|
|
|
|
The object can have the value mip (2) in the
|
|
intermediate nodes and possibly in the egress nodes
|
|
of the transport path."
|
|
DEFVAL { mep }
|
|
::= { mplsOamIdMeEntry 7 }
|
|
|
|
mplsOamIdMeMepDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up (1),
|
|
down (2),
|
|
notApplicable (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the direction of the MEP. This object
|
|
should be configured if mplsOamIdMeMpType is configured
|
|
as mep (1); otherwise, notApplicable (3) is set."
|
|
DEFVAL { down }
|
|
::= { mplsOamIdMeEntry 8 }
|
|
|
|
mplsOamIdMeServicePointer OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents a pointer to the MPLS-TP
|
|
transport path. This value MUST point at an entry in the
|
|
mplsTunnelEntry if mplsOamIdMegServicePointerType
|
|
is configured as tunnel (1), lsp (2), or section (4),
|
|
or at an entry in the pwEntry if
|
|
mplsOamIdMegServicePointerType is configured
|
|
as pseudowire (3).
|
|
|
|
Note: This service pointer object is placed in the ME table
|
|
instead of the MEG table, since it will be useful in the
|
|
point-to-multipoint case, where each ME will point to
|
|
different branches of a point-to-multipoint tree."
|
|
::= { mplsOamIdMeEntry 9 }
|
|
|
|
mplsOamIdMeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete
|
|
a row in this table. When a row in this table is in the
|
|
active(1) state, no objects in that row can be modified
|
|
by the agent except mplsOamIdMeRowStatus."
|
|
::= { mplsOamIdMeEntry 10 }
|
|
|
|
mplsOamIdMeStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this object.
|
|
Conceptual rows having the value 'permanent'
|
|
need not allow write access to any columnar
|
|
objects in the row."
|
|
DEFVAL { volatile }
|
|
::= { mplsOamIdMeEntry 11 }
|
|
|
|
-- End of MPLS Transport Profile ME table
|
|
|
|
-- End of MPLS-TP OAM tables
|
|
|
|
-- Notification definitions of MPLS-TP identifiers
|
|
|
|
mplsOamIdDefectCondition NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
mplsOamIdMegName,
|
|
mplsOamIdMeName,
|
|
mplsOamIdMegOperStatus,
|
|
mplsOamIdMegSubOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is sent whenever the operational
|
|
status of the MEG is changed."
|
|
::= { mplsOamIdNotifications 1 }
|
|
|
|
-- End of notifications
|
|
|
|
-- Module compliance
|
|
|
|
mplsOamIdCompliances
|
|
OBJECT IDENTIFIER ::= { mplsOamIdConformance 1 }
|
|
|
|
mplsOamIdGroups
|
|
OBJECT IDENTIFIER ::= { mplsOamIdConformance 2 }
|
|
|
|
-- Compliance requirement for fully compliant implementations
|
|
|
|
mplsOamIdModuleFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "Compliance statement for agents that provide full
|
|
support for the MPLS-TP-OAM-STD-MIB. Such devices
|
|
can then be monitored and also be configured
|
|
using this MIB module."
|
|
|
|
MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863
|
|
MANDATORY-GROUPS {
|
|
ifGeneralInformationGroup,
|
|
ifCounterDiscontinuityGroup
|
|
}
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
mplsOamIdMegGroup,
|
|
mplsOamIdMeGroup
|
|
}
|
|
|
|
GROUP mplsOamIdNotificationObjectsGroup
|
|
DESCRIPTION "This group is only mandatory for those
|
|
implementations that can efficiently implement
|
|
the notifications contained in this group."
|
|
|
|
GROUP mplsOamIdNotificationGroup
|
|
DESCRIPTION "This group is only mandatory for those
|
|
implementations that can efficiently implement
|
|
the notifications contained in this group."
|
|
::= { mplsOamIdCompliances 1 }
|
|
|
|
-- Compliance requirement for read-only implementations
|
|
|
|
mplsOamIdModuleReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for agents that only provide
|
|
read-only support for the MPLS-TP-OAM-STD-MIB module."
|
|
|
|
MODULE -- this module
|
|
|
|
MANDATORY-GROUPS {
|
|
mplsOamIdMegGroup,
|
|
mplsOamIdMeGroup
|
|
}
|
|
|
|
GROUP mplsOamIdNotificationObjectsGroup
|
|
DESCRIPTION "This group is only mandatory for those
|
|
implementations that can efficiently implement
|
|
the notifications contained in this group."
|
|
|
|
GROUP mplsOamIdNotificationGroup
|
|
DESCRIPTION "This group is only mandatory for those
|
|
implementations that can efficiently implement
|
|
the notifications contained in this group."
|
|
|
|
-- mplsOamIdMegTable
|
|
|
|
OBJECT mplsOamIdMegName
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMegOperatorType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMegIdCc
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMegIdIcc
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMegIdUmc
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMegServicePointerType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMegMpLocation
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMegPathFlow
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMegRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMegStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
-- mplsOamIdMeTable
|
|
|
|
OBJECT mplsOamIdMeName
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMeMpIfIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMeSourceMepIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMeSinkMepIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMeMpType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMeMepDirection
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMeServicePointer
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMeRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsOamIdMeStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { mplsOamIdCompliances 2 }
|
|
|
|
-- Units of conformance
|
|
|
|
mplsOamIdMegGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsOamIdMegIndexNext,
|
|
mplsOamIdMegName,
|
|
mplsOamIdMegOperatorType,
|
|
mplsOamIdMegIdCc,
|
|
mplsOamIdMegIdIcc,
|
|
mplsOamIdMegIdUmc,
|
|
mplsOamIdMegServicePointerType,
|
|
mplsOamIdMegMpLocation,
|
|
mplsOamIdMegOperStatus,
|
|
mplsOamIdMegSubOperStatus,
|
|
mplsOamIdMegPathFlow,
|
|
mplsOamIdMegRowStatus,
|
|
mplsOamIdMegStorageType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS MEG information."
|
|
::= { mplsOamIdGroups 1 }
|
|
|
|
mplsOamIdMeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsOamIdMeIndexNext,
|
|
mplsOamIdMeMpIndexNext,
|
|
mplsOamIdMeName,
|
|
mplsOamIdMeMpIfIndex,
|
|
mplsOamIdMeSourceMepIndex,
|
|
mplsOamIdMeSinkMepIndex,
|
|
mplsOamIdMeMpType,
|
|
mplsOamIdMeMepDirection,
|
|
mplsOamIdMeServicePointer,
|
|
mplsOamIdMeRowStatus,
|
|
mplsOamIdMeStorageType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS ME information."
|
|
::= { mplsOamIdGroups 2 }
|
|
|
|
mplsOamIdNotificationObjectsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsOamIdMegOperStatus,
|
|
mplsOamIdMegSubOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed to implement notifications."
|
|
::= { mplsOamIdGroups 3 }
|
|
|
|
mplsOamIdNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
mplsOamIdDefectCondition
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set of notifications implemented in this module."
|
|
::= { mplsOamIdGroups 4 }
|
|
|
|
END
|