Observium_CE/mibs/rfc/MPLS-FRR-ONE2ONE-STD-MIB

464 lines
15 KiB
Plaintext

MPLS-FRR-ONE2ONE-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, mib-2,
Integer32, Gauge32
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF -- [RFC2580]
TruthValue
FROM SNMPv2-TC -- [RFC2579]
MplsTunnelIndex, MplsTunnelInstanceIndex,
MplsLsrIdentifier
FROM MPLS-TC-STD-MIB -- [RFC3811]
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB -- [RFC4001]
mplsFrrGeneralScalarGroup, mplsFrrGeneralTunnelARHopGroup,
mplsFrrGeneralConstraintsGroup
FROM MPLS-FRR-GENERAL-STD-MIB
;
mplsFrrOne2OneMIB MODULE-IDENTITY
LAST-UPDATED
"201111030000Z" -- 03 Nov 2011 00:00:00 GMT
ORGANIZATION
"Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
"
Riza Cetin
Email: riza.cetin@alcatel.be
Thomas D. Nadeau
Email: thomas.nadeau@ca.com
A S Kiran Koushik
Email: kkoushik@cisco.com
Stefaan De Cnodder
Email: Stefaan.de_cnodder@alcatel.be
Der-Hwa Gan
Email: dhg@juniper.net
"
DESCRIPTION
"Copyright (c) 2011 IETF Trust and the persons
identified as authors of the code. All rights
reserved.
Redistribution and use in source and binary forms,
with or without modification, is permitted pursuant
to, and subject to the license terms contained in,
the Simplified BSD License set forth in Section 4.c
of the IETF Trust's Legal Provisions Relating to
IETF Documents
(http://trustee.ietf.org/license-info).
This MIB module contains object definitions for the
MPLS Traffic Engineering one-to-one backup method for
Fast Reroute as defined in RFC 4090."
-- Revision history.
REVISION
"201111030000Z" -- 03 Nov 2011 00:00:00 GMT
DESCRIPTION
"Initial version. Published as RFC 6445."
::= { mib-2 203 }
-- Top-level components of this MIB module
mplsFrrOne2OneObjects OBJECT IDENTIFIER
::= { mplsFrrOne2OneMIB 1 }
mplsFrrOne2OneConformance OBJECT IDENTIFIER
::= { mplsFrrOne2OneMIB 2 }
-- Scalar objects defined for the one-to-one style of FRR
mplsFrrIncomingDetourLSPs OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of detour LSPs entering the device."
::= { mplsFrrOne2OneObjects 1 }
mplsFrrOutgoingDetourLSPs OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of detour LSPs leaving the device."
::= { mplsFrrOne2OneObjects 2 }
mplsFrrOne2OneDetourOriginating OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of detour LSPs originating at this PLR."
::= { mplsFrrOne2OneObjects 3 }
mplsFrrActiveProtectedLSPs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of LSPs currently protected by
the FRR feature where this device acts as the PLR
for those LSPs."
::= { mplsFrrOne2OneObjects 4 }
--
-- One-to-One specific tables
--
-- Tables in this section pertain only to the one-to-one
-- style of FRR.
--
-- MPLS Fast-Reroute Point of Local Repair table
mplsFrrOne2OnePlrTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsFrrOne2OnePlrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows a list of protected TE tunnels with
the corresponding protecting tunnel, as well as the PLR
where the protecting tunnel that initiated the detour
LSPs traverses this node."
::= { mplsFrrOne2OneObjects 5 }
mplsFrrOne2OnePlrEntry OBJECT-TYPE
SYNTAX MplsFrrOne2OnePlrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a protected tunnel LSP
together with its detour tunnel instance. An entry in
this table is only created by an SNMP engine as instructed
by an MPLS signaling protocol.
The entries of this table are present in all LSRs on the
path of the detour LSP.
The objects mplsFrrOne2OnePlrSenderAddrType and
mplsFrrOne2OnePlrSenderAddr can be modified after the row
is created.
The objects mplsFrrOne2OnePlrTunnelIndex,
mplsFrrOne2OnePlrTunnelDetourInstance,
mplsFrrOne2OnePlrTunnelIngressLSRId,
and mplsFrrOne2OnePlrTunnelEgressLSRId have the same
values as the objects mplsTunnelIndex, mplsTunnelInstance,
mplsTunnelIngressLSRId, and mplsTunnelEgressLSRId of the
detour tunnel instance created in the mplsTunnelTable
(MPLS-TE-STD-MIB).
The entries in this table will be deleted when the
corresponding entries in the mplsTunnelTable are deleted."
INDEX { mplsFrrOne2OnePlrTunnelIndex, -- from MPLS-TE-STD-MIB
mplsFrrOne2OnePlrTunnelDetourInstance,-- mplsTunnelTable
mplsFrrOne2OnePlrTunnelIngressLSRId,-- Tunnels must exist
mplsFrrOne2OnePlrTunnelEgressLSRId, -- a priori
mplsFrrOne2OnePlrId }
::= { mplsFrrOne2OnePlrTable 1 }
MplsFrrOne2OnePlrEntry ::= SEQUENCE {
mplsFrrOne2OnePlrTunnelIndex MplsTunnelIndex,
mplsFrrOne2OnePlrTunnelDetourInstance MplsTunnelInstanceIndex,
mplsFrrOne2OnePlrTunnelIngressLSRId MplsLsrIdentifier,
mplsFrrOne2OnePlrTunnelEgressLSRId MplsLsrIdentifier,
mplsFrrOne2OnePlrId MplsLsrIdentifier,
mplsFrrOne2OnePlrSenderAddrType InetAddressType,
mplsFrrOne2OnePlrSenderAddr InetAddress,
mplsFrrOne2OnePlrAvoidNodeAddrType InetAddressType,
mplsFrrOne2OnePlrAvoidNodeAddr InetAddress
}
mplsFrrOne2OnePlrTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a tunnel between a pair of LSRs
from the mplsTunnelEntry."
::= { mplsFrrOne2OnePlrEntry 1 }
mplsFrrOne2OnePlrTunnelDetourInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a detour instance of a tunnel from
the mplsTunnelEntry.
- lower 16 bits : protected tunnel instance
- higher 16 bits: detour instance"
::= { mplsFrrOne2OnePlrEntry 2 }
mplsFrrOne2OnePlrTunnelIngressLSRId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The purpose of this object is to uniquely identify a
tunnel within a network. When the MPLS signaling
protocol is rsvp(2), this object SHOULD contain the
same value as the Extended Tunnel ID field in the
SESSION object. When the MPLS signaling protocol
is crldp(3), this object SHOULD contain the same
value as the Ingress LSR Router ID field in the
LSPID TLV object.
This value represents the head-end of the protected
tunnel instance."
REFERENCE
"Section 4.7 of RFC 3209."
::= { mplsFrrOne2OnePlrEntry 3 }
mplsFrrOne2OnePlrTunnelEgressLSRId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the egress LSR ID of the protected tunnel instance."
::= { mplsFrrOne2OnePlrEntry 4 }
mplsFrrOne2OnePlrId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value represents the PLR that has initiated a detour LSP
to protect a tunnel instance.
This value is signaled via the DETOUR object defined in
MPLS RSVP."
REFERENCE
"Section 4.2 of RFC 4090."
::= { mplsFrrOne2OnePlrEntry 5 }
mplsFrrOne2OnePlrSenderAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Denotes the address type of this detour instance's sender
address."
DEFVAL { ipv4 }
::= { mplsFrrOne2OnePlrEntry 6 }
mplsFrrOne2OnePlrSenderAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the PLR that has initiated the detour LSP.
The type of this address is determined by the value of the
mplsFrrOne2OnePlrSenderAddrType object."
::= { mplsFrrOne2OnePlrEntry 7 }
mplsFrrOne2OnePlrAvoidNodeAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the address type of the node that this PLR tries to
avoid."
DEFVAL { ipv4 }
::= { mplsFrrOne2OnePlrEntry 8 }
mplsFrrOne2OnePlrAvoidNodeAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the node that this PLR tries to avoid.
The type of this address is determined by the value of the
mplsFrrOne2OnePlrAvoidNodeAddrType object.
This value is signaled via the DETOUR object defined in
MPLS RSVP."
REFERENCE
"Section 4.2 of RFC 4090."
::= { mplsFrrOne2OnePlrEntry 9 }
-- MPLS One-to-One Fast-Reroute Detour table
mplsFrrOne2OneDetourTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsFrrOne2OneDetourEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows detour LSPs."
::= { mplsFrrOne2OneObjects 6 }
mplsFrrOne2OneDetourEntry OBJECT-TYPE
SYNTAX MplsFrrOne2OneDetourEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a detour. An entry in this
table is only created by an SNMP engine as instructed by an
MPLS signaling protocol."
INDEX {
mplsFrrOne2OnePlrTunnelIndex, -- from MPLS-TE-STD-MIB
mplsFrrOne2OnePlrTunnelDetourInstance, -- mplsTunnelTable
mplsFrrOne2OnePlrTunnelIngressLSRId,-- Tunnels must exist
mplsFrrOne2OnePlrTunnelEgressLSRId -- a priori
}
::= { mplsFrrOne2OneDetourTable 1 }
MplsFrrOne2OneDetourEntry ::= SEQUENCE {
mplsFrrOne2OneDetourActive TruthValue,
mplsFrrOne2OneDetourMergedStatus INTEGER,
mplsFrrOne2OneDetourMergedDetourInst MplsTunnelInstanceIndex
}
mplsFrrOne2OneDetourActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not the main LSP has switched over to
this detour LSP.
If the value of this object is 'true', then it means that
the main LSP has switched over to this detour LSP. Otherwise,
it contains a value of 'false'.
This is only relevant for detours originated by this node."
::= { mplsFrrOne2OneDetourEntry 1 }
mplsFrrOne2OneDetourMergedStatus OBJECT-TYPE
SYNTAX INTEGER { notMerged(1),
mergedWithProtectedTunnel(2),
mergedWithDetour(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents whether or not this detour is merged.
This value is set to notMerged(1) if this detour is not
merged.
This value is set to mergedWithProtectedTunnel(2) if
this detour is merged with the protected tunnel. This value
is mergedWithDetour(3) if this detour is merged
with another detour protecting the same tunnel."
::= { mplsFrrOne2OneDetourEntry 2 }
mplsFrrOne2OneDetourMergedDetourInst OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the mplsTunnelInstance of the detour
with which this detour is merged. This object is only valid
when mplsFrrOne2OneDetourMergedStatus is set to
mergedWithDetour(3).
- lower 16 bits : protected tunnel instance
- higher 16 bits: detour instance"
::= { mplsFrrOne2OneDetourEntry 3 }
-- Module Conformance Statement
mplsFrrOne2OneCompliances
OBJECT IDENTIFIER ::= {mplsFrrOne2OneConformance 1 }
mplsFrrOne2OneGroups
OBJECT IDENTIFIER ::= {mplsFrrOne2OneConformance 2 }
mplsFrrOne2OneModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statements for SNMP engines that support the
MPLS-FRR-ONE2ONE-STD-MIB module."
MODULE MPLS-FRR-GENERAL-STD-MIB -- MPLS FRR Generic MIB
MANDATORY-GROUPS {
mplsFrrGeneralScalarGroup,
mplsFrrGeneralTunnelARHopGroup,
mplsFrrGeneralConstraintsGroup
}
MODULE -- this module
MANDATORY-GROUPS {
mplsFrrOne2OneScalarsGroup,
mplsFrrOne2OnePLRDetourGroup,
mplsFrrOne2OnePlrGroup
}
::= { mplsFrrOne2OneCompliances 1 }
mplsFrrOne2OneModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statements for SNMP engines that support the
MPLS-FRR-ONE2ONE-STD-MIB module."
MODULE
MANDATORY-GROUPS {
mplsFrrOne2OneScalarsGroup,
mplsFrrOne2OnePLRDetourGroup,
mplsFrrOne2OnePlrGroup
}
-- mplsFrrOne2OnePlrTable
OBJECT mplsFrrOne2OnePlrSenderAddrType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFrrOne2OnePlrSenderAddr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { mplsFrrOne2OneCompliances 2 }
-- Units of conformance
mplsFrrOne2OneScalarsGroup OBJECT-GROUP
OBJECTS {
mplsFrrIncomingDetourLSPs,
mplsFrrOutgoingDetourLSPs,
mplsFrrOne2OneDetourOriginating,
mplsFrrActiveProtectedLSPs
}
STATUS current
DESCRIPTION
"Objects that are required for general One-to-One PLR
information."
::= { mplsFrrOne2OneGroups 1 }
mplsFrrOne2OnePLRDetourGroup OBJECT-GROUP
OBJECTS {
mplsFrrOne2OneDetourActive,
mplsFrrOne2OneDetourMergedStatus,
mplsFrrOne2OneDetourMergedDetourInst
}
STATUS current
DESCRIPTION
"Objects that are required to present the detour LSP
information at the detour ingress, transit, and egress
LSRs."
::= { mplsFrrOne2OneGroups 2 }
mplsFrrOne2OnePlrGroup OBJECT-GROUP
OBJECTS {
mplsFrrOne2OnePlrSenderAddrType,
mplsFrrOne2OnePlrSenderAddr,
mplsFrrOne2OnePlrAvoidNodeAddrType,
mplsFrrOne2OnePlrAvoidNodeAddr
}
STATUS current
DESCRIPTION
"Objects that are required to represent the FRR
One-to-One PLR information."
::= { mplsFrrOne2OneGroups 3 }
END