Observium_CE/mibs/rfc/LOWPAN-MIB

802 lines
25 KiB
Plaintext

LOWPAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, mib-2
FROM SNMPv2-SMI -- RFC 2578
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF -- RFC 2580
ifIndex FROM IF-MIB; -- RFC 2863
lowpanMIB MODULE-IDENTITY
LAST-UPDATED "201410100000Z" -- October 10, 2014
ORGANIZATION
"IETF IPv6 over Networks of Resource-constrained Nodes
Working Group"
CONTACT-INFO
"WG Email: 6lo@ietf.org
WG Web: http://tools.ietf.org/wg/6lo/
Juergen Schoenwaelder
Jacobs University Bremen
Email: j.schoenwaelder@jacobs-university.de
Anuj Sehgal
Jacobs University Bremen
Email: s.anuj@jacobs-university.de
Tina Tsou
Huawei Technologies
Email: tina.tsou.zouting@huawei.com
Cathy Zhou
Huawei Technologies
Email: cathyzhou@huawei.com"
DESCRIPTION
"The MIB module for monitoring nodes implementing the IPv6
over Low-Power Wireless Personal Area Networks (6LoWPAN)
protocol.
Copyright (c) 2014 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info)."
REVISION "201410100000Z" -- October 10, 2014
DESCRIPTION
"Initial version, published as RFC 7388."
::= { mib-2 226 }
-- object definitions
lowpanNotifications OBJECT IDENTIFIER ::= { lowpanMIB 0 }
lowpanObjects OBJECT IDENTIFIER ::= { lowpanMIB 1 }
lowpanConformance OBJECT IDENTIFIER ::= { lowpanMIB 2 }
lowpanStats OBJECT IDENTIFIER ::= { lowpanObjects 1 }
lowpanReasmTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of seconds that received fragments are
held while they are awaiting reassembly at this entity."
::= { lowpanStats 1 }
lowpanInReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of 6LoWPAN datagrams received, including
those received in error."
::= { lowpanStats 2 }
lowpanInHdrErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received 6LoWPAN datagrams discarded due to
errors in their headers, including unknown dispatch values."
::= { lowpanStats 3 }
lowpanInMeshReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received 6LoWPAN datagrams with a MESH
header."
::= { lowpanStats 4 }
lowpanInMeshForwds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received 6LoWPAN datagrams requiring mesh
forwarding."
::= { lowpanStats 5 }
lowpanInMeshDelivers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received 6LoWPAN datagrams with a MESH header
delivered to the local system."
::= { lowpanStats 6 }
lowpanInReasmReqds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received 6LoWPAN fragments that needed to
be reassembled. This includes both FRAG1 and FRAGN 6LoWPAN
datagrams."
::= { lowpanStats 7 }
lowpanInReasmFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failures detected by the re-assembly
algorithm (e.g., timeouts). Note that this is not
necessarily a count of discarded 6LoWPAN fragments
since implementations can lose track of the number
of fragments by combining them as received."
::= { lowpanStats 8 }
lowpanInReasmOKs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets successfully reassembled."
::= { lowpanStats 9 }
lowpanInCompReqds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams requiring header
decompression."
::= { lowpanStats 10 }
lowpanInCompFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams where header decompression
failed (e.g., because the necessary context information was
not available)."
::= { lowpanStats 11 }
lowpanInCompOKs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams where header decompression
was successful."
::= { lowpanStats 12 }
lowpanInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received 6LoWPAN datagrams that were
discarded (e.g., for lack of buffer space) even though no
problems were encountered to prevent their continued
processing. Note that this counter does not include any
datagrams discarded due to a reassembly failure or a
compression failure."
::= { lowpanStats 13 }
lowpanInDelivers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPv6 packets successfully delivered
to the IPv6 layer."
::= { lowpanStats 14 }
lowpanOutRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPv6 packets supplied by the IPv6
layer."
::= { lowpanStats 15 }
lowpanOutCompReqds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPv6 packets for which header
compression was attempted."
::= { lowpanStats 16 }
lowpanOutCompFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPv6 packets for which header
compression failed."
::= { lowpanStats 17 }
lowpanOutCompOKs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPv6 packets for which header
compression was successful."
::= { lowpanStats 18 }
lowpanOutFragReqds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets that required fragmentation
in order to be transmitted."
::= { lowpanStats 19 }
lowpanOutFragFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets that have been discarded because
fragmentation failed."
::= { lowpanStats 20 }
lowpanOutFragOKs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets that have been successfully
fragmented."
::= { lowpanStats 21 }
lowpanOutFragCreates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN fragments that have been
generated as a result of fragmentation. This includes
both FRAG1 and FRAGN 6LoWPAN datagrams."
::= { lowpanStats 22 }
lowpanOutMeshHopLimitExceeds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams with a MESH header that
were dropped because the hop limit was exceeded."
::= { lowpanStats 23 }
lowpanOutMeshNoRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams with a MESH header that
were dropped because there was no forwarding information
available."
::= { lowpanStats 24 }
lowpanOutMeshRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams requiring MESH header
encapsulation."
::= { lowpanStats 25 }
lowpanOutMeshForwds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams with a MESH header for
which suitable forwarding information was available."
::= { lowpanStats 26 }
lowpanOutMeshTransmits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams with a MESH header
created."
::= { lowpanStats 27 }
lowpanOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets that were discarded (e.g.,
for lack of buffer space) even though no problem was
encountered to prevent their transmission to their
destination."
::= { lowpanStats 28 }
lowpanOutTransmits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of 6LoWPAN datagram that this entity
supplied to the lower layers for transmission."
::= { lowpanStats 29 }
lowpanIfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LowpanIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table providing per-interface statistics."
::= { lowpanObjects 2 }
lowpanIfStatsEntry OBJECT-TYPE
SYNTAX LowpanIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry providing statistics for a specific interface."
INDEX { ifIndex }
::= { lowpanIfStatsTable 1 }
LowpanIfStatsEntry ::= SEQUENCE {
lowpanIfReasmTimeout Unsigned32,
lowpanIfInReceives Counter32,
lowpanIfInHdrErrors Counter32,
lowpanIfInMeshReceives Counter32,
lowpanIfInMeshForwds Counter32,
lowpanIfInMeshDelivers Counter32,
lowpanIfInReasmReqds Counter32,
lowpanIfInReasmFails Counter32,
lowpanIfInReasmOKs Counter32,
lowpanIfInCompReqds Counter32,
lowpanIfInCompFails Counter32,
lowpanIfInCompOKs Counter32,
lowpanIfInDiscards Counter32,
lowpanIfInDelivers Counter32,
lowpanIfOutRequests Counter32,
lowpanIfOutCompReqds Counter32,
lowpanIfOutCompFails Counter32,
lowpanIfOutCompOKs Counter32,
lowpanIfOutFragReqds Counter32,
lowpanIfOutFragFails Counter32,
lowpanIfOutFragOKs Counter32,
lowpanIfOutFragCreates Counter32,
lowpanIfOutMeshHopLimitExceeds Counter32,
lowpanIfOutMeshNoRoutes Counter32,
lowpanIfOutMeshRequests Counter32,
lowpanIfOutMeshForwds Counter32,
lowpanIfOutMeshTransmits Counter32,
lowpanIfOutDiscards Counter32,
lowpanIfOutTransmits Counter32
}
lowpanIfReasmTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of seconds that received fragments are
held while they are awaiting reassembly at this interface."
::= { lowpanIfStatsEntry 1 }
lowpanIfInReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of 6LoWPAN datagrams received on this
interface, including those received in error."
::= { lowpanIfStatsEntry 2 }
lowpanIfInHdrErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams received on this
interface that were discarded due to errors in
their headers, including unknown dispatch values."
::= { lowpanIfStatsEntry 3 }
lowpanIfInMeshReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams received on this
interface with a MESH header."
::= { lowpanIfStatsEntry 4 }
lowpanIfInMeshForwds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams received on this
interface requiring mesh forwarding."
::= { lowpanIfStatsEntry 5 }
lowpanIfInMeshDelivers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams received on this
interface with a MESH header delivered to the local
system."
::= { lowpanIfStatsEntry 6 }
lowpanIfInReasmReqds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN fragments received on this
interface that needed to be reassembled. This
includes both FRAG1 and FRAGN 6LoWPAN datagrams."
::= { lowpanIfStatsEntry 7 }
lowpanIfInReasmFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failures detected by the reassembly
algorithm (e.g., timeouts) for datagrams received
on this interface. Note that this is not necessarily
a count of discarded 6LoWPAN fragments since
implementations can lose track of the number
of fragments by combining them as received."
::= { lowpanIfStatsEntry 8 }
lowpanIfInReasmOKs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets successfully reassembled
from fragments received on this interface."
::= { lowpanIfStatsEntry 9 }
lowpanIfInCompReqds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams received on this
interface requiring header decompression."
::= { lowpanIfStatsEntry 10 }
lowpanIfInCompFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams received on this
interface where header decompression failed (e.g.,
because the necessary context information was
not available)."
::= { lowpanIfStatsEntry 11 }
lowpanIfInCompOKs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams received on this
interface where header decompression was successful."
::= { lowpanIfStatsEntry 12 }
lowpanIfInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams received on this
interface that were discarded (e.g., for lack of buffer
space) even though no problems were encountered to
prevent their continued processing. Note that this
counter does not include any datagrams discarded due
to a reassembly failure or a compression failure."
::= { lowpanIfStatsEntry 13 }
lowpanIfInDelivers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPv6 packets received on this
interface that were successfully delivered to the
IPv6 layer."
::= { lowpanIfStatsEntry 14 }
lowpanIfOutRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPv6 packets supplied by the IPv6
layer to be sent over this interface."
::= { lowpanIfStatsEntry 15 }
lowpanIfOutCompReqds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPv6 packets to be sent over
this interface for which header compression was
attempted."
::= { lowpanIfStatsEntry 16 }
lowpanIfOutCompFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPv6 packets to be sent over
this interface for which header compression failed."
::= { lowpanIfStatsEntry 17 }
lowpanIfOutCompOKs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPv6 packets to be sent over
this interface for which header compression was
successful."
::= { lowpanIfStatsEntry 18 }
lowpanIfOutFragReqds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets to be sent over this
interface that required fragmentation in order
to be transmitted."
::= { lowpanIfStatsEntry 19 }
lowpanIfOutFragFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets to be sent over this
interface that have been discarded because
fragmentation failed."
::= { lowpanIfStatsEntry 20 }
lowpanIfOutFragOKs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets to be sent over this
interface that have been successfully fragmented."
::= { lowpanIfStatsEntry 21 }
lowpanIfOutFragCreates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN fragments that have been
generated on this interface as a result of
fragmentation. This includes both FRAG1 and FRAGN
6LoWPAN datagrams."
::= { lowpanIfStatsEntry 22 }
lowpanIfOutMeshHopLimitExceeds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams to be sent on this
interface with a MESH header that were dropped
because the hop limit was exceeded."
::= { lowpanIfStatsEntry 23 }
lowpanIfOutMeshNoRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams to be sent on this
interface with a MESH header that were dropped
because there was no forwarding information available."
::= { lowpanIfStatsEntry 24 }
lowpanIfOutMeshRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams to be sent on this
interface requiring MESH header encapsulation."
::= { lowpanIfStatsEntry 25 }
lowpanIfOutMeshForwds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams to be sent on this
interface with a MESH header for which suitable
forwarding information was available."
::= { lowpanIfStatsEntry 26 }
lowpanIfOutMeshTransmits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6LoWPAN datagrams to be sent on this
interface with a MESH header created."
::= { lowpanIfStatsEntry 27 }
lowpanIfOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets to be sent over this
interface that were discarded (e.g., for lack of buffer
space) even though no problem was encountered to
prevent their transmission to their destination."
::= { lowpanIfStatsEntry 28 }
lowpanIfOutTransmits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of 6LoWPAN datagrams to be sent on
this interface that this entity supplied to the lower
layers for transmission."
::= { lowpanIfStatsEntry 29 }
-- conformance definitions
lowpanGroups OBJECT IDENTIFIER ::= { lowpanConformance 1 }
lowpanCompliances OBJECT IDENTIFIER ::= { lowpanConformance 2 }
lowpanCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for systems that implement 6LoWPAN."
MODULE -- this module
MANDATORY-GROUPS {
lowpanStatsGroup
}
GROUP lowpanStatsMeshGroup
DESCRIPTION
"This group is mandatory for implementations that process
or forward 6LoWPAN datagrams with a MESH header."
GROUP lowpanIfStatsGroup
DESCRIPTION
"This group is mandatory for implementations that expose
per-interface statistics."
GROUP lowpanIfStatsMeshGroup
DESCRIPTION
"This group is mandatory for implementations that expose
per-interface statistics and that process or forward
6LoWPAN datagrams with a MESH header."
::= { lowpanCompliances 1 }
lowpanStatsGroup OBJECT-GROUP
OBJECTS {
lowpanReasmTimeout,
lowpanInReceives,
lowpanInHdrErrors,
lowpanInMeshReceives,
lowpanInReasmReqds,
lowpanInReasmFails,
lowpanInReasmOKs,
lowpanInCompReqds,
lowpanInCompFails,
lowpanInCompOKs,
lowpanInDiscards,
lowpanInDelivers,
lowpanOutRequests,
lowpanOutCompReqds,
lowpanOutCompFails,
lowpanOutCompOKs,
lowpanOutFragReqds,
lowpanOutFragFails,
lowpanOutFragOKs,
lowpanOutFragCreates,
lowpanOutDiscards,
lowpanOutTransmits
}
STATUS current
DESCRIPTION
"A collection of objects providing information and
statistics about the processing of 6LoWPAN datagrams,
excluding counters covering the processing of datagrams
with a MESH header."
::= { lowpanGroups 1 }
lowpanStatsMeshGroup OBJECT-GROUP
OBJECTS {
lowpanInMeshForwds,
lowpanInMeshDelivers,
lowpanOutMeshHopLimitExceeds,
lowpanOutMeshNoRoutes,
lowpanOutMeshRequests,
lowpanOutMeshForwds,
lowpanOutMeshTransmits
}
STATUS current
DESCRIPTION
"A collection of objects providing information and
statistics about the processing of 6LoWPAN datagrams
with a MESH header."
::= { lowpanGroups 2 }
lowpanIfStatsGroup OBJECT-GROUP
OBJECTS {
lowpanIfReasmTimeout,
lowpanIfInReceives,
lowpanIfInHdrErrors,
lowpanIfInMeshReceives,
lowpanIfInReasmReqds,
lowpanIfInReasmFails,
lowpanIfInReasmOKs,
lowpanIfInCompReqds,
lowpanIfInCompFails,
lowpanIfInCompOKs,
lowpanIfInDiscards,
lowpanIfInDelivers,
lowpanIfOutRequests,
lowpanIfOutCompReqds,
lowpanIfOutCompFails,
lowpanIfOutCompOKs,
lowpanIfOutFragReqds,
lowpanIfOutFragFails,
lowpanIfOutFragOKs,
lowpanIfOutFragCreates,
lowpanIfOutDiscards,
lowpanIfOutTransmits
}
STATUS current
DESCRIPTION
"A collection of objects providing per-interface
information and statistics about the processing
of 6LoWPAN datagrams, excluding counters covering
the processing of datagrams with a MESH header."
::= { lowpanGroups 3 }
lowpanIfStatsMeshGroup OBJECT-GROUP
OBJECTS {
lowpanIfInMeshForwds,
lowpanIfInMeshDelivers,
lowpanIfOutMeshHopLimitExceeds,
lowpanIfOutMeshNoRoutes,
lowpanIfOutMeshRequests,
lowpanIfOutMeshForwds,
lowpanIfOutMeshTransmits
}
STATUS current
DESCRIPTION
"A collection of objects providing per-interface
information and statistics about the processing
of 6LoWPAN datagrams with a MESH header."
::= { lowpanGroups 4 }
END