1655 lines
54 KiB
Plaintext
1655 lines
54 KiB
Plaintext
IPOA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
transmission, Integer32, IpAddress, Counter32,
|
|
Gauge32
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, RowStatus
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
ipNetToMediaNetAddress, ipNetToMediaIfIndex,
|
|
ipNetToMediaPhysAddress, ipAdEntAddr
|
|
FROM IP-MIB
|
|
|
|
-- The following textual conventions are defined locally within
|
|
-- this MIB module. They have been prefixed with 'Ipoa' to
|
|
-- distinguish them from their counterparts in the ATM-TC-MIB.
|
|
-- This was done so that the IPOA-MIB could be advanced as
|
|
-- a standards-based MIB without waiting for the ATM-TC-MIB.
|
|
|
|
-- AtmConnKind, AtmAddr
|
|
-- FROM ATM-TC-MIB
|
|
|
|
InterfaceIndex, InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
;
|
|
|
|
ipoaMIB MODULE-IDENTITY
|
|
LAST-UPDATED "9802090000Z" -- February 9, 1998
|
|
ORGANIZATION "IETF Internetworking Over NBMA Working
|
|
Group (ion)"
|
|
CONTACT-INFO
|
|
"Maria Greene (greene@xedia.com)
|
|
Xedia Corp.
|
|
|
|
Jim Luciani (jluciani@BayNetworks.com)
|
|
Bay Networks
|
|
|
|
Kenneth White (kennethw@vnet.ibm.com)
|
|
IBM Corp.
|
|
|
|
Ted Kuo (tkuo@eos.ncsu.edu)
|
|
Bay Networks"
|
|
DESCRIPTION
|
|
"This module defines a portion of the management
|
|
|
|
information base (MIB) for managing Classical IP and
|
|
ARP over ATM entities."
|
|
::= { transmission 46 }
|
|
|
|
-- Textual Conventions
|
|
|
|
IpoaEncapsType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The encapsulation type used on a VC."
|
|
SYNTAX INTEGER {
|
|
llcSnap(1),
|
|
vcMuxed(2),
|
|
other(3)
|
|
}
|
|
|
|
IpoaVpiInteger ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer large enough to contain the value of a VPI."
|
|
SYNTAX Integer32 (0..255)
|
|
|
|
IpoaVciInteger ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer large enough to contain the value of a VCI."
|
|
SYNTAX Integer32 (0..65535)
|
|
|
|
IpoaAtmAddr ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "1x"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM address used by the network entity.
|
|
The semantics are implied by the length.
|
|
The address types are:
|
|
|
|
- no address (0 octets)
|
|
- E.164 (8 octets)
|
|
- NSAP (20 octets)
|
|
|
|
In addition, when subaddresses are used IpoaAtmAddr
|
|
may represent the concatenation of address and
|
|
subaddress. The associated address types are:
|
|
|
|
- E.164, E.164 (16 octets)
|
|
- E.164, NSAP (28 octets)
|
|
- NSAP, NSAP (40 octets)
|
|
|
|
Address lengths other than defined in this definition
|
|
imply address types defined elsewhere.
|
|
Note: The E.164 address is encoded in BCD format."
|
|
SYNTAX OCTET STRING (SIZE(0..40))
|
|
|
|
IpoaAtmConnKind ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The use of call control. The use is as follows:
|
|
pvc(1)
|
|
Virtual link of a PVC. Should not be
|
|
used in a PVC/SVC (i.e., SPVC)
|
|
crossconnect.
|
|
svcIncoming(2)
|
|
Virtual link established after a
|
|
received signaling request to setup
|
|
an SVC.
|
|
svcOutgoing(3)
|
|
Virtual link established after a
|
|
transmitted or forwarded signaling
|
|
request to setup an SVC.
|
|
spvcInitiator(4)
|
|
Virtual link at the PVC side of an
|
|
SVC/PVC crossconnect, where the
|
|
switch is the initiator of the SPVC
|
|
setup.
|
|
spvcTarget(5)
|
|
Virtual link at the PVC side of an
|
|
SVC/PVC crossconnect, where the
|
|
switch is the target of the SPVC
|
|
setup.
|
|
|
|
An spvcInitiator is always cross-connected to
|
|
an svcOutgoing, and an spvcTarget is always
|
|
cross-connected to an svcIncoming."
|
|
SYNTAX INTEGER {
|
|
pvc(1),
|
|
svcIncoming(2),
|
|
svcOutgoing(3),
|
|
spvcInitiator(4),
|
|
spvcTarget(5)
|
|
}
|
|
|
|
-- Top-level structure of the MIB
|
|
|
|
ipoaObjects OBJECT IDENTIFIER ::= { ipoaMIB 1 }
|
|
ipoaNotifications OBJECT IDENTIFIER ::= { ipoaMIB 2 }
|
|
ipoaConformance OBJECT IDENTIFIER ::= { ipoaMIB 3 }
|
|
|
|
-- MIB Objects
|
|
|
|
ipoaLisTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether ipoaLisCreate and ipoaLisDelete
|
|
traps should be generated by this system.
|
|
|
|
By default, this object should have the value
|
|
enabled(1) for systems where ATMARP Servers are
|
|
present and disabled(2) on systems where only
|
|
clients reside."
|
|
::= { ipoaObjects 1 }
|
|
|
|
-- The ATM Logical IP Subnet (LIS) Table
|
|
|
|
ipoaLisTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpoaLisEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is one entry in this table for every Logical IP
|
|
Subnet (LIS) of which this system is a member.
|
|
|
|
The bulk of the objects in an ipoaLisEntry exists
|
|
to control ATMARP for a particular LIS. In a PVC only
|
|
environment it is implementation dependent as to
|
|
whether this table should be supported."
|
|
::= { ipoaObjects 2 }
|
|
|
|
ipoaLisEntry OBJECT-TYPE
|
|
SYNTAX IpoaLisEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single LIS of which this system
|
|
is a member.
|
|
|
|
Membership in a LIS is independent of the actual ATM
|
|
interfaces being used. The ipoaLisTable defines
|
|
all LISs that a system is a member of. The ipAddrTable
|
|
and the ipoaClientTable provides the mapping from local
|
|
IP address to ATM interface. The ipoaLisIfMappingTable
|
|
provides the mappings between Logical IP Subnets and
|
|
interfaces.
|
|
|
|
The ipoaLisTable is indexed by ipoaLisSubnetAddr (IP
|
|
subnet address). An entry in the ipoaLisTable should
|
|
exist for each ipAddrEntry that is associated with an
|
|
ATM related interface used for Classical IP and ARP
|
|
over ATM traffic.
|
|
|
|
Its ipAdEntAddr and ipAdEntNetMask when ANDed together
|
|
should equal the ipoaLisSubnetAddr of the corresponding
|
|
ipoaLisEntry."
|
|
INDEX { ipoaLisSubnetAddr }
|
|
::= { ipoaLisTable 1 }
|
|
|
|
IpoaLisEntry ::= SEQUENCE {
|
|
ipoaLisSubnetAddr IpAddress,
|
|
ipoaLisDefaultMtu Integer32,
|
|
ipoaLisDefaultEncapsType IpoaEncapsType,
|
|
ipoaLisInactivityTimer Integer32,
|
|
ipoaLisMinHoldingTime Integer32,
|
|
ipoaLisQDepth Integer32,
|
|
ipoaLisMaxCalls Integer32,
|
|
ipoaLisCacheEntryAge Integer32,
|
|
ipoaLisRetries Integer32,
|
|
ipoaLisTimeout Integer32,
|
|
ipoaLisDefaultPeakCellRate Integer32,
|
|
ipoaLisActiveVcs Gauge32,
|
|
ipoaLisRowStatus RowStatus
|
|
}
|
|
|
|
ipoaLisSubnetAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP subnet address associated with this LIS."
|
|
::= { ipoaLisEntry 1 }
|
|
|
|
ipoaLisDefaultMtu OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default MTU used within this LIS. Note that the
|
|
actual MTU used for a VC between two members of the
|
|
LIS may be negotiated during connection setup and may
|
|
be different than this value. The ipoaVcNegotiatedMtu
|
|
object indicates the actual MTU in use for a
|
|
particular VC."
|
|
DEFVAL { 9180 }
|
|
::= { ipoaLisEntry 2 }
|
|
|
|
ipoaLisDefaultEncapsType OBJECT-TYPE
|
|
SYNTAX IpoaEncapsType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default encapsulation to use on VCs created for
|
|
this LIS. Note that the actual encapsulation type may
|
|
be negotiated during connection setup and may be
|
|
different than this value. The
|
|
ipoaVcNegotiatedEncapsType object indicates the actual
|
|
encapsulation in use for a particular VC."
|
|
DEFVAL { llcSnap }
|
|
::= { ipoaLisEntry 3 }
|
|
|
|
ipoaLisInactivityTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time, in seconds, before a call established for an
|
|
ipNetToMediaEntry on a client will timeout due to no
|
|
traffic being passed on the VC. A value of 0 implies
|
|
no time out."
|
|
REFERENCE
|
|
"RFC 1755, Sec. 3.4 VC Teardown"
|
|
DEFVAL { 1200 }
|
|
::= { ipoaLisEntry 4 }
|
|
|
|
ipoaLisMinHoldingTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum amount of time, in seconds, that a call
|
|
will remain open. If 0 then ipoaInactivityTimer will
|
|
completely determine when a call is terminated."
|
|
REFERENCE
|
|
"RFC 1755, Sec. 3.4 VC Teardown"
|
|
DEFVAL { 60 }
|
|
::= { ipoaLisEntry 5 }
|
|
|
|
ipoaLisQDepth OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "packets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of outstanding requests that are
|
|
allowed while waiting for ATMARP replies and
|
|
InATMARP replies for this LIS."
|
|
DEFVAL { 1 }
|
|
::= { ipoaLisEntry 6 }
|
|
|
|
ipoaLisMaxCalls OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of SVCs that can be established
|
|
simultaneously for this LIS."
|
|
DEFVAL { 500 }
|
|
::= { ipoaLisEntry 7 }
|
|
|
|
ipoaLisCacheEntryAge OBJECT-TYPE
|
|
SYNTAX Integer32 (60..1200)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time, in seconds, before an ipNetToMediaEntry will
|
|
age out of the table. Note that the default value will
|
|
be different for a client and a server. An ATMARP
|
|
Server should use a default of 1200 and a client should
|
|
use 900."
|
|
DEFVAL { 900 }
|
|
::= { ipoaLisEntry 8 }
|
|
|
|
ipoaLisRetries OBJECT-TYPE
|
|
SYNTAX Integer32 (0..10)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the ATMARP request will be retried
|
|
when no response is received in the timeout interval
|
|
indicated by ipoaLisTimeout."
|
|
DEFVAL { 2 }
|
|
::= { ipoaLisEntry 9 }
|
|
|
|
ipoaLisTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (1..60)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time to wait, in seconds, before retransmission
|
|
of an ARP request."
|
|
DEFVAL { 10 }
|
|
::= { ipoaLisEntry 10 }
|
|
|
|
ipoaLisDefaultPeakCellRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the signalling parameter that
|
|
should be used when setting up all best effort
|
|
VCCs (Virtual Channel Connections).
|
|
This parameter applies to the forward and
|
|
backward direction on a per best effort VCC basis.
|
|
A value of zero implies that no configured default
|
|
exists and that local policy should be used to
|
|
determine the actual default to used during
|
|
call setup. ATM Signaling Support for IP over ATM
|
|
(RFC 1755) recommends 1/10th of the ATM interface's
|
|
speed."
|
|
::= { ipoaLisEntry 11 }
|
|
|
|
ipoaLisActiveVcs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of active SVCs for this LIS."
|
|
::= { ipoaLisEntry 12 }
|
|
|
|
ipoaLisRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows entries to be created and deleted
|
|
in the ipoaLisTable.
|
|
|
|
When the ipoaLisRowStatus deleted (by setting this
|
|
object to destroy(6)), this has the side-effect of
|
|
removing all entries from the ipNetToMediaTable that
|
|
are associated with this LIS (in other words, it
|
|
flushes the entity's ATMARP cache). It also removes
|
|
the ipoaVcTable entries that were associated with those
|
|
ipNetToMediaTable entries. Destroying the row also
|
|
|
|
removes the corresponding entries in the
|
|
ipoaArpSrvrTable, ipoaArpClientTable,
|
|
ipoaLisIfMappingTable, and ipoaArpRemoteSrvrTable.
|
|
|
|
Entries in both the ipNetToMediaTable and the
|
|
ipoaVcTable that are associated with a
|
|
ipoaConfigPvcEntry are not affected by changes to
|
|
ipoaLisRowStatus."
|
|
REFERENCE
|
|
"RFC 1903, 'Textual Conventions for Version 2 of the
|
|
Simple Network Management Protocol (SNMPv2).'"
|
|
::= { ipoaLisEntry 13 }
|
|
|
|
-- The ATM Logical IP Subnet Interface Mapping Table
|
|
|
|
ipoaLisIfMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpoaLisIfMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is one entry in this table for every combination
|
|
of ipoaLisEntry and IP over ATM interface."
|
|
::= { ipoaObjects 3 }
|
|
|
|
ipoaLisIfMappingEntry OBJECT-TYPE
|
|
SYNTAX IpoaLisIfMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the ipoaLisIfMappingTable."
|
|
INDEX { ipoaLisSubnetAddr, ipoaLisIfMappingIfIndex }
|
|
::= { ipoaLisIfMappingTable 1 }
|
|
|
|
IpoaLisIfMappingEntry ::= SEQUENCE {
|
|
ipoaLisIfMappingIfIndex InterfaceIndex,
|
|
ipoaLisIfMappingRowStatus RowStatus
|
|
}
|
|
|
|
ipoaLisIfMappingIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ipAdEntIfIndex object from an ipAddrEntry
|
|
is used as an index to this table when its
|
|
ipAdEntAddr is in the subnet implied by
|
|
ipoaLisSubnetAddr."
|
|
::= { ipoaLisIfMappingEntry 1 }
|
|
|
|
ipoaLisIfMappingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows entries to be created and deleted
|
|
in the ipoaLisIfMappingTable."
|
|
REFERENCE
|
|
"RFC 1903, 'Textual Conventions for Version 2 of the
|
|
Simple Network Management Protocol (SNMPv2).'"
|
|
::= { ipoaLisIfMappingEntry 2 }
|
|
|
|
-- The ATMARP Client Table
|
|
|
|
ipoaArpClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpoaArpClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATMARP clients running on this system."
|
|
::= { ipoaObjects 4 }
|
|
|
|
ipoaArpClientEntry OBJECT-TYPE
|
|
SYNTAX IpoaArpClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single ATMARP Client. Clients
|
|
can be started and stopped by adding and removing
|
|
entries from this table. An entry in the
|
|
ipoaArpClientTable has a corresponding entry in the
|
|
ipAddrTable. Both are indexed by ipAdEntAddr.
|
|
The ifIndex and subnet mask of a client entry are the
|
|
ipAddrEntry's ipAdEntIfIndex and ipAdEntNetMask,
|
|
respectively.
|
|
|
|
Note that adding and removing entries from this table
|
|
may have the same effect on the corresponding
|
|
ipAddrTable entry. Row creation of an entry in this
|
|
table requires that either the corresponding ipAddrTable
|
|
entry exists or that ipAdEntIfIndex and ipAdEntNetMask
|
|
be specified in the creation of an ipoaArpClientEntry
|
|
at a minimum in order to create the corresponding
|
|
ipAddrEntry. Specification of ipAdEntBcastAddr and
|
|
ipAdEntReasmMaxSize to complete an ipAddrEntry is
|
|
implementation dependent.
|
|
|
|
Whether a corresponding ipAddrEntry is deleted during
|
|
the deletion of an ipoaArpClientEntry is considered
|
|
implementation dependent."
|
|
INDEX { ipAdEntAddr }
|
|
::= { ipoaArpClientTable 1 }
|
|
|
|
IpoaArpClientEntry ::= SEQUENCE {
|
|
ipoaArpClientAtmAddr IpoaAtmAddr,
|
|
ipoaArpClientSrvrInUse IpoaAtmAddr,
|
|
ipoaArpClientInArpInReqs Counter32,
|
|
ipoaArpClientInArpOutReqs Counter32,
|
|
ipoaArpClientInArpInReplies Counter32,
|
|
ipoaArpClientInArpOutReplies Counter32,
|
|
ipoaArpClientInArpInvalidInReqs Counter32,
|
|
ipoaArpClientInArpInvalidOutReqs Counter32,
|
|
ipoaArpClientArpInReqs Counter32,
|
|
ipoaArpClientArpOutReqs Counter32,
|
|
ipoaArpClientArpInReplies Counter32,
|
|
ipoaArpClientArpOutReplies Counter32,
|
|
ipoaArpClientArpInNaks Counter32,
|
|
ipoaArpClientArpOutNaks Counter32,
|
|
ipoaArpClientArpUnknownOps Counter32,
|
|
ipoaArpClientArpNoSrvrResps Counter32,
|
|
ipoaArpClientRowStatus RowStatus
|
|
}
|
|
|
|
ipoaArpClientAtmAddr OBJECT-TYPE
|
|
SYNTAX IpoaAtmAddr
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM address of the client."
|
|
::= { ipoaArpClientEntry 1 }
|
|
|
|
ipoaArpClientSrvrInUse OBJECT-TYPE
|
|
SYNTAX IpoaAtmAddr
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM address of the ATMARP Server,
|
|
ipoaArpRemoteSrvrAtmAddr, in use by this client. A
|
|
zero length octet string implies that communication
|
|
with a Remote ATMARP Server is not in effect."
|
|
DEFVAL { ''H }
|
|
::= { ipoaArpClientEntry 2 }
|
|
|
|
ipoaArpClientInArpInReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of InATMARP requests received by this
|
|
client."
|
|
::= { ipoaArpClientEntry 3 }
|
|
|
|
ipoaArpClientInArpOutReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of InATMARP requests sent by this client."
|
|
::= { ipoaArpClientEntry 4 }
|
|
|
|
ipoaArpClientInArpInReplies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of InATMARP replies received by this
|
|
client."
|
|
::= { ipoaArpClientEntry 5 }
|
|
|
|
ipoaArpClientInArpOutReplies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of InATMARP replies sent by this client."
|
|
::= { ipoaArpClientEntry 6 }
|
|
|
|
ipoaArpClientInArpInvalidInReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that this client detected an
|
|
invalid InATMARP request."
|
|
::= { ipoaArpClientEntry 7 }
|
|
|
|
ipoaArpClientInArpInvalidOutReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that this client did not
|
|
receive an InATMARP reply."
|
|
::= { ipoaArpClientEntry 8 }
|
|
|
|
ipoaArpClientArpInReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of ATMARP requests received by this
|
|
client."
|
|
::= { ipoaArpClientEntry 9 }
|
|
|
|
ipoaArpClientArpOutReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of ATMARP requests sent by this client."
|
|
::= { ipoaArpClientEntry 10 }
|
|
|
|
ipoaArpClientArpInReplies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of ATMARP replies received by this
|
|
client."
|
|
::= { ipoaArpClientEntry 11 }
|
|
|
|
ipoaArpClientArpOutReplies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of ATMARP replies sent by this client."
|
|
::= { ipoaArpClientEntry 12 }
|
|
|
|
ipoaArpClientArpInNaks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of negative ATMARP replies
|
|
received by this client."
|
|
::= { ipoaArpClientEntry 13 }
|
|
|
|
ipoaArpClientArpOutNaks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of negative ATMARP replies sent by
|
|
this client.
|
|
|
|
Classic IP and ARP over ATM does not require an
|
|
ATMARP client to transmit an ATMARP_NAK upon
|
|
receipt of an ATMARP request from another ATMARP
|
|
client. However, implementation experience has
|
|
shown that this error condition is somewhat easy
|
|
to create inadvertently by configuring one ATMARP
|
|
client with an ipoaArpRemoteSrvrTable entry
|
|
containing an ipoaArpRemoteSrvrAtmAddr value which
|
|
is the ATM address of another ATMARP client-only
|
|
system.
|
|
|
|
If an ATMARP client supports the transmission of
|
|
ATMARP_NAKs, then it should increment
|
|
ipoaArpClientArpOutNaks each time it transmits
|
|
an ATMARP_NAK. Otherwise, support of this
|
|
object is considered optional."
|
|
::= { ipoaArpClientEntry 14 }
|
|
|
|
ipoaArpClientArpUnknownOps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that this client received
|
|
an ATMARP message with an operation code for which
|
|
it is not coded to support."
|
|
::= { ipoaArpClientEntry 15 }
|
|
|
|
ipoaArpClientArpNoSrvrResps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this client failed to receive
|
|
a response from a ATMARP Server within the
|
|
ipoaLisTimeout value for ipoaLisRetries times.
|
|
This may imply that the client will re-elect a
|
|
new primary ATMARP Server for this LIS from the
|
|
ipoaArpRemoteSrvrTable."
|
|
::= { ipoaArpClientEntry 16 }
|
|
|
|
ipoaArpClientRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows entries to be created and
|
|
deleted from the ipoaArpClientTable."
|
|
REFERENCE
|
|
"RFC 1903, 'Textual Conventions for Version 2 of the
|
|
Simple Network Management Protocol (SNMPv2).'"
|
|
::= { ipoaArpClientEntry 17 }
|
|
|
|
-- The ATMARP Server Table
|
|
|
|
ipoaArpSrvrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpoaArpSrvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATMARP Servers running on this system."
|
|
::= { ipoaObjects 5 }
|
|
|
|
ipoaArpSrvrEntry OBJECT-TYPE
|
|
SYNTAX IpoaArpSrvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an ATMARP Server within a LIS. An
|
|
entry in this table has two indexes: first ipAdEntAddr,
|
|
which is the IP address that this system uses as a
|
|
member of the LIS, and then ipoaArpSrvrAddr, which is
|
|
the ATM address of the ATMARP Server.
|
|
|
|
Entries may be created by a management application
|
|
using the ipoaArpSrvrRowStatus object. Entries in this
|
|
table may also be created by the system and not by a
|
|
management application, for example via ILMI.
|
|
|
|
Entries in this table may be deleted by setting the
|
|
ipoaArpSrvrRowStatus object to 'destroy(6)'. This
|
|
includes entries that were added by the system and not
|
|
by a management application."
|
|
INDEX { ipAdEntAddr, ipoaArpSrvrAddr }
|
|
::= { ipoaArpSrvrTable 1 }
|
|
|
|
IpoaArpSrvrEntry ::= SEQUENCE {
|
|
ipoaArpSrvrAddr IpoaAtmAddr,
|
|
ipoaArpSrvrLis IpAddress,
|
|
ipoaArpSrvrInArpInReqs Counter32,
|
|
ipoaArpSrvrInArpOutReqs Counter32,
|
|
ipoaArpSrvrInArpInReplies Counter32,
|
|
ipoaArpSrvrInArpOutReplies Counter32,
|
|
ipoaArpSrvrInArpInvalidInReqs Counter32,
|
|
ipoaArpSrvrInArpInvalidOutReqs Counter32,
|
|
ipoaArpSrvrArpInReqs Counter32,
|
|
ipoaArpSrvrArpOutReplies Counter32,
|
|
ipoaArpSrvrArpOutNaks Counter32,
|
|
ipoaArpSrvrArpDupIpAddrs Counter32,
|
|
ipoaArpSrvrArpUnknownOps Counter32,
|
|
ipoaArpSrvrRowStatus RowStatus
|
|
}
|
|
|
|
ipoaArpSrvrAddr OBJECT-TYPE
|
|
SYNTAX IpoaAtmAddr
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM address of the ATMARP Server."
|
|
::= { ipoaArpSrvrEntry 1 }
|
|
|
|
ipoaArpSrvrLis OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet address that identifies the LIS with
|
|
which this server is associated."
|
|
::= { ipoaArpSrvrEntry 2 }
|
|
|
|
ipoaArpSrvrInArpInReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of InATMARP requests received by this
|
|
ATMARP Server."
|
|
::= { ipoaArpSrvrEntry 3 }
|
|
|
|
ipoaArpSrvrInArpOutReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of InATMARP requests sent by this ATMARP
|
|
Server."
|
|
::= { ipoaArpSrvrEntry 4 }
|
|
|
|
ipoaArpSrvrInArpInReplies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of InATMARP replies received by this
|
|
ATMARP Server."
|
|
::= { ipoaArpSrvrEntry 5 }
|
|
|
|
ipoaArpSrvrInArpOutReplies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of InATMARP replies sent by this ATMARP
|
|
Server."
|
|
::= { ipoaArpSrvrEntry 6 }
|
|
|
|
ipoaArpSrvrInArpInvalidInReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of invalid InATMARP requests received by
|
|
this ATMARP Server."
|
|
::= { ipoaArpSrvrEntry 7 }
|
|
|
|
ipoaArpSrvrInArpInvalidOutReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that this server did not receive
|
|
an InATMARP reply."
|
|
::= { ipoaArpSrvrEntry 8 }
|
|
|
|
ipoaArpSrvrArpInReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of ATMARP requests received by this
|
|
ATMARP Server."
|
|
::= { ipoaArpSrvrEntry 9 }
|
|
|
|
ipoaArpSrvrArpOutReplies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of ATMARP replies sent by this ATMARP
|
|
Server."
|
|
::= { ipoaArpSrvrEntry 10 }
|
|
|
|
ipoaArpSrvrArpOutNaks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of negative ATMARP replies sent by this
|
|
ATMARP Server."
|
|
::= { ipoaArpSrvrEntry 11 }
|
|
|
|
ipoaArpSrvrArpDupIpAddrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that a duplicate IP address was
|
|
detected by this ATMARP Server."
|
|
::= { ipoaArpSrvrEntry 12 }
|
|
|
|
ipoaArpSrvrArpUnknownOps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that this ATMARP Server received
|
|
an ATMARP message with an operation code for which it
|
|
is not coded to support."
|
|
::= { ipoaArpSrvrEntry 13 }
|
|
|
|
ipoaArpSrvrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows entries to be created and deleted
|
|
from the ipoaArpSrvrTable."
|
|
REFERENCE
|
|
"RFC 1903, 'Textual Conventions for Version 2 of the
|
|
Simple Network Management Protocol (SNMPv2).'"
|
|
::= { ipoaArpSrvrEntry 14 }
|
|
|
|
-- The Remote ATMARP Server Table
|
|
|
|
ipoaArpRemoteSrvrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpoaArpRemoteSrvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of non-local ATMARP Servers associated with a
|
|
LIS. An entry in this table has three indexes: first
|
|
the ipoaLisSubnetAddr of the LIS for which the
|
|
corresponding ATMARP Server provides ATMARP services,
|
|
then the ipoaArpRemoteSrvrAtmAddr, which is the ATM
|
|
address of the remote ATMARP Server, and finally the
|
|
ifIndex of the interface on which the VC to the ATMARP
|
|
Remote Server will be opened. An ifIndex value of 0
|
|
should be used when a single VC is to be shared for
|
|
ATMARP purposes by multiple interfaces."
|
|
::= { ipoaObjects 6 }
|
|
|
|
ipoaArpRemoteSrvrEntry OBJECT-TYPE
|
|
SYNTAX IpoaArpRemoteSrvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about one non-local ATMARP Server."
|
|
INDEX { ipoaLisSubnetAddr, ipoaArpRemoteSrvrAtmAddr,
|
|
ipoaArpRemoteSrvrIfIndex }
|
|
::= { ipoaArpRemoteSrvrTable 1 }
|
|
|
|
IpoaArpRemoteSrvrEntry ::= SEQUENCE {
|
|
ipoaArpRemoteSrvrAtmAddr IpoaAtmAddr,
|
|
ipoaArpRemoteSrvrRowStatus RowStatus,
|
|
ipoaArpRemoteSrvrIfIndex InterfaceIndexOrZero,
|
|
ipoaArpRemoteSrvrIpAddr IpAddress,
|
|
ipoaArpRemoteSrvrAdminStatus INTEGER,
|
|
ipoaArpRemoteSrvrOperStatus INTEGER
|
|
}
|
|
|
|
ipoaArpRemoteSrvrAtmAddr OBJECT-TYPE
|
|
SYNTAX IpoaAtmAddr
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM address of the remote ATMARP Server."
|
|
::= { ipoaArpRemoteSrvrEntry 1 }
|
|
|
|
ipoaArpRemoteSrvrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows entries to be created and deleted
|
|
from the ipoaArpRemoteSrvrTable.
|
|
|
|
Deleting an ipoaArpRemoteSrvrEntry (by setting this
|
|
object to destroy(6)) may affect ipoaArpClientTable
|
|
entries. The object ipoaArpClientSrvrInUse in an
|
|
ipoaArpClientSrvrEntry may contain the ATM address
|
|
of an ATMARP Remote Server whose entry in the
|
|
ipoaArpRemoteSrvrTable is being removed. In this
|
|
case, any corresponding ipoaArpClientSrvrInUse
|
|
objects should be at a minimum invalidated by
|
|
setting their values to that of a zero length
|
|
OCTET STRING.
|
|
|
|
The value of ipoaArpRemoteSrvrOperStatus should be
|
|
consistent with that of ipoaArpRemoteSrvrRowStatus.
|
|
For example, successfully setting the value of
|
|
this object to notInService(2) after its being in
|
|
the up(1) state should result in
|
|
ipoaArpRemoteSrvrOperStatus being set to down(2)
|
|
if currently up(1)."
|
|
REFERENCE
|
|
"RFC 1903, 'Textual Conventions for Version 2 of the
|
|
Simple Network Management Protocol (SNMPv2).'"
|
|
::= { ipoaArpRemoteSrvrEntry 2 }
|
|
|
|
ipoaArpRemoteSrvrIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the interface that the VC to the
|
|
Remote ATMARP Server is associated with."
|
|
::= { ipoaArpRemoteSrvrEntry 3 }
|
|
|
|
ipoaArpRemoteSrvrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the Remote ATMARP Server. A
|
|
value of 0.0.0.0 implies that this address isn't
|
|
known."
|
|
DEFVAL { '00000000'H }
|
|
::= { ipoaArpRemoteSrvrEntry 4 }
|
|
|
|
ipoaArpRemoteSrvrAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
|
|
up(1), -- use this ATMARP Server
|
|
down(2) -- stop using this ATMARP Server
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired state for use of the ATMARP Server
|
|
represented by an entry in this table.
|
|
ipoaArpRemoteSrvrAdminStatus values:
|
|
|
|
up(1) - Attempt to activate use of the
|
|
ATMARP Server represented by this
|
|
entry in the ipoaArpRemoteSrvrTable.
|
|
down(2) - Deactivate use of this ATMARP
|
|
Server.
|
|
|
|
When a managed system creates an entry in this
|
|
table ipoaArpRemoteSrvrAdminStatus and
|
|
ipoaArpRemoteSrvrOperStatus are initialized as
|
|
down(2) by default."
|
|
DEFVAL { down }
|
|
::= { ipoaArpRemoteSrvrEntry 5 }
|
|
|
|
ipoaArpRemoteSrvrOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- eligible for use
|
|
down(2) -- not eligible for use
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state for use of a Remote
|
|
ATMARP Server. An up(1) entry has a VC
|
|
established to the respective Remote ATMARP
|
|
Server:
|
|
|
|
up(1) - A VC exists to Remote ATMARP Server
|
|
whose IP Address is stored in
|
|
ipoaArpRemoteSrvrIpAddr. This VC can
|
|
be determined by searching the
|
|
ipoaVcTable using
|
|
ipoaArpRemoteSrvrIfIndex (if not 0,
|
|
otherwise ignore ipNetToMediaIfIndex
|
|
index) and ipoaArpRemoteSrvrIpAddr.
|
|
An ipoaArpClientEntry should exist
|
|
with its ipoaArpClientSrvrInUse
|
|
object having the same value as
|
|
ipoaArpRemoteSrvrAtmAddr.
|
|
|
|
down(2) - Entry exists without an active VC to
|
|
the Remote ATMARP Server.
|
|
|
|
Transition from up(1) to down(2)
|
|
status may affect ipoaArpClientTable entries.
|
|
The object ipoaArpClientSrvrInUse in an
|
|
ipoaArpClientSrvrEntry may contain the ATM address
|
|
of an ATMARP Remote Server whose entry in the
|
|
ipoaArpRemoteSrvrTable is being deactivated. In
|
|
this case, any corresponding ipoaArpClientSrvrInUse
|
|
objects should be at a minimum invalidated by
|
|
setting their values to that of a zero length
|
|
OCTET STRING.
|
|
|
|
If ipoaArpRemoteSrvrAdminStatus is down(2) then
|
|
ipoaArpRemoteSrvrOperStatus should be down(2).
|
|
If ipoaArpRemoteSrvrAdminStatus is changed to
|
|
up(1) then ipoaArpRemoteSrvrOperStatus should
|
|
change to up(1) if the Remote ATMARP Server
|
|
entry can be activated."
|
|
DEFVAL { down }
|
|
::= { ipoaArpRemoteSrvrEntry 6 }
|
|
|
|
-- The ATM VC Table
|
|
|
|
ipoaVcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpoaVcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A system that supports IP over ATM is an IP system and
|
|
therefore MUST support all of the appropriate tables in
|
|
the SNMPv2-MIB (RFC 1907), the IF-MIB (RFC 2233),
|
|
the IP-MIB (RFC 2011), the TCP-MIB (RFC 2012), and
|
|
the UDP-MIB (RFC 2013). This includes the
|
|
ipNetToMediaTable (the ARP cache) that is defined
|
|
within the IP-MIB (RFC 2011). The ipoaVcTable
|
|
keeps a set of VCs for each entry in the ARP cache
|
|
that was put there by an IP over ATM system acting
|
|
as either a host or server. The ipoaVcTable doesn't
|
|
augment the ipNetToMediaTable (ARP Cache) since the
|
|
the correspondence between tables is not necessarily
|
|
one-to-one.
|
|
|
|
An ipNetToMediaPhysAddress object should contain the
|
|
content as defined by the IpoaAtmAddr textual
|
|
convention when used to hold an IPOA-MIB ATM Address."
|
|
::= { ipoaObjects 7 }
|
|
|
|
ipoaVcEntry OBJECT-TYPE
|
|
SYNTAX IpoaVcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A VC (permanent or switched) that this host or server
|
|
has opened with another member of a LIS. Additional
|
|
information can be determined about the VC from the
|
|
ATM-MIB.
|
|
|
|
Entries in this table cannot be created by management
|
|
applications.
|
|
|
|
In an SVC environment, an entry is automatically added
|
|
by the system as the result of ATMARP processing.
|
|
|
|
In a PVC environment, an entry is automatically added
|
|
to this table when an entry is created in the
|
|
ipoaConfigPvcTable and the IP Address at the remote
|
|
end of the PVC is discovered using InATMARP. An
|
|
entry also is added to the ipNetToMediaTable."
|
|
INDEX { ipNetToMediaIfIndex,
|
|
ipNetToMediaNetAddress,
|
|
ipoaVcVpi,
|
|
ipoaVcVci
|
|
}
|
|
::= { ipoaVcTable 1 }
|
|
|
|
IpoaVcEntry ::= SEQUENCE {
|
|
ipoaVcVpi IpoaVpiInteger,
|
|
ipoaVcVci IpoaVciInteger,
|
|
ipoaVcType IpoaAtmConnKind,
|
|
ipoaVcNegotiatedEncapsType IpoaEncapsType,
|
|
ipoaVcNegotiatedMtu Integer32 }
|
|
|
|
ipoaVcVpi OBJECT-TYPE
|
|
SYNTAX IpoaVpiInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VPI value for the Virtual Circuit."
|
|
::= { ipoaVcEntry 1 }
|
|
|
|
ipoaVcVci OBJECT-TYPE
|
|
SYNTAX IpoaVciInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VCI value for the Virtual Circuit."
|
|
::= { ipoaVcEntry 2 }
|
|
|
|
ipoaVcType OBJECT-TYPE
|
|
SYNTAX IpoaAtmConnKind
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the Virtual Circuit."
|
|
::= { ipoaVcEntry 3 }
|
|
|
|
ipoaVcNegotiatedEncapsType OBJECT-TYPE
|
|
SYNTAX IpoaEncapsType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The encapsulation type used when communicating over
|
|
this circuit."
|
|
::= { ipoaVcEntry 4 }
|
|
|
|
ipoaVcNegotiatedMtu OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MTU used when communicating over this circuit."
|
|
::= { ipoaVcEntry 5 }
|
|
|
|
-- The ATM Config PVC Table
|
|
|
|
ipoaConfigPvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpoaConfigPvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table MUST be supported when PVCs are intended to
|
|
be supported in order to enable the setup of PVCs for
|
|
use by IP."
|
|
::= { ipoaObjects 8 }
|
|
|
|
ipoaConfigPvcEntry OBJECT-TYPE
|
|
SYNTAX IpoaConfigPvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines a single PVC that exists at this host for
|
|
use by IP."
|
|
INDEX { ipoaConfigPvcIfIndex,
|
|
ipoaConfigPvcVpi,
|
|
ipoaConfigPvcVci
|
|
}
|
|
::= { ipoaConfigPvcTable 1 }
|
|
|
|
IpoaConfigPvcEntry ::= SEQUENCE {
|
|
ipoaConfigPvcIfIndex InterfaceIndex,
|
|
ipoaConfigPvcVpi IpoaVpiInteger,
|
|
ipoaConfigPvcVci IpoaVciInteger,
|
|
ipoaConfigPvcDefaultMtu Integer32,
|
|
ipoaConfigPvcRowStatus RowStatus }
|
|
|
|
ipoaConfigPvcIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the ATM Interface that this PVC
|
|
is associated with."
|
|
::= { ipoaConfigPvcEntry 1 }
|
|
|
|
ipoaConfigPvcVpi OBJECT-TYPE
|
|
SYNTAX IpoaVpiInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VPI value for the Virtual Circuit."
|
|
::= { ipoaConfigPvcEntry 2 }
|
|
|
|
ipoaConfigPvcVci OBJECT-TYPE
|
|
SYNTAX IpoaVciInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VCI value for the Virtual Circuit."
|
|
::= { ipoaConfigPvcEntry 3 }
|
|
|
|
ipoaConfigPvcDefaultMtu OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Classical IP and ARP over ATM allows use of
|
|
other MTU values for PVCs but considers how a
|
|
value other than 9180 could be selected to be out
|
|
of scope. ipoaConfigPvcDefaultMtu can be used to
|
|
configure the MTU to be used for the PVC.
|
|
|
|
Both ends MUST have the same value configured."
|
|
DEFVAL { 9180 }
|
|
::= { ipoaConfigPvcEntry 4 }
|
|
|
|
ipoaConfigPvcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows rows to be created and deleted in
|
|
the ipoaConfigPvcTable. Creation of an entry in this
|
|
table should eventually result in the creation of an
|
|
ipNetToMediaEntry and a corresponding ipoaVcEntry
|
|
after InATMARP has determined the destination address
|
|
of the remote system that the PVC is connected to.
|
|
Setting this object to destroy(6) should remove the
|
|
corresponding ipNetToMediaTable and ipoaVcTable
|
|
entries."
|
|
REFERENCE
|
|
"RFC 1903, 'Textual Conventions for Version 2 of the
|
|
Simple Network Management Protocol (SNMPv2).'"
|
|
::= { ipoaConfigPvcEntry 5 }
|
|
|
|
-- Notifications
|
|
|
|
ipoaTrapPrefix OBJECT IDENTIFIER ::= { ipoaNotifications 0 }
|
|
|
|
ipoaMtuExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ipoaVcNegotiatedMtu
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A frame was received that exceeds the negotiated
|
|
MTU size. The VPI and VCI of the VC for which this
|
|
condition was detected can be determined from the
|
|
index values for ipoaVcNegotiatedMtu. In addition,
|
|
the ifIndex and IP Address can be determined as
|
|
well (refer to the ipoaVcTable)."
|
|
::= { ipoaTrapPrefix 1 }
|
|
|
|
ipoaDuplicateIpAddress NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ipNetToMediaIfIndex,
|
|
ipNetToMediaNetAddress,
|
|
ipNetToMediaPhysAddress,
|
|
ipNetToMediaPhysAddress
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATMARP Server has detected more than one ATM end
|
|
point attempting to associate the same IP address with
|
|
different ATM addresses."
|
|
::= { ipoaTrapPrefix 2 }
|
|
|
|
ipoaLisCreate NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ipoaLisSubnetAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generation of this trap occurs when an ipoaLisEntry is
|
|
created while the ipoaLisTrapEnable.0 object has the
|
|
value enabled(1)."
|
|
::= { ipoaTrapPrefix 3 }
|
|
|
|
ipoaLisDelete NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ipoaLisSubnetAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generation of this trap occurs when an ipoaLisEntry is
|
|
deleted while the ipoaLisTrapEnable.0 object has the
|
|
value enabled(1)."
|
|
::= { ipoaTrapPrefix 4 }
|
|
|
|
-- Conformance Definitions
|
|
|
|
ipoaGroups OBJECT IDENTIFIER ::= { ipoaConformance 1 }
|
|
|
|
ipoaCompliances OBJECT IDENTIFIER ::= { ipoaConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
ipoaCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for agents that support the
|
|
IPOA-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ipoaGeneralGroup,
|
|
ipoaBasicNotificationsGroup
|
|
}
|
|
GROUP ipoaClientGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for all hosts where IP
|
|
over ATM client support is present."
|
|
GROUP ipoaSrvrGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for all hosts where ATMARP
|
|
Servers are present."
|
|
GROUP ipoaSrvrNotificationsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for all hosts where ATMARP
|
|
Servers are present."
|
|
GROUP ipoaLisNotificationsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for all hosts where
|
|
ATMARP client only support is present and
|
|
ipoaLisTrapEnable is allowed to be set to
|
|
enabled(1)."
|
|
GROUP ipoaLisTableGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for all entities which
|
|
support IP over ATM SVCs. Support of objects in
|
|
this group by IP over ATM clients which only
|
|
support IP over ATM PVCs is optional."
|
|
|
|
OBJECT ipoaLisDefaultMtu
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to allow the user
|
|
to change the default MTU from the value 9180.
|
|
|
|
The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaLisDefaultEncapsType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to allow the user to
|
|
specify the default encapsulation type for the
|
|
LIS.
|
|
|
|
The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaLisInactivityTimer
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaLisMinHoldingTime
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaLisQDepth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaLisMaxCalls
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaLisCacheEntryAge
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaLisRetries
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to allow the user
|
|
to change the default number of times an ATMARP
|
|
request will be retried when no response is
|
|
received from the default of 2.
|
|
|
|
The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaLisTimeout
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to allow the user
|
|
|
|
to change the default retransmission time from
|
|
the default of 10 seconds.
|
|
|
|
The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaLisDefaultPeakCellRate
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Implementations that do not support IP over
|
|
ATM SVC usage are not required to allow the
|
|
user to specify a best effort default peak cell
|
|
rate since typically the ipoaLisTable won't
|
|
exist.
|
|
|
|
The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaLisIfMappingRowStatus
|
|
SYNTAX INTEGER {
|
|
active(1) -- subset of RowStatus
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support a SET
|
|
operation to this object, and only one
|
|
of the six enumerated values for the
|
|
RowStatus textual convention need be
|
|
supported, specifically: active(1)."
|
|
|
|
OBJECT ipoaArpClientAtmAddr
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaArpSrvrLis
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaArpRemoteSrvrAdminStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security. In this case the value of
|
|
this object should be up(1) when a VC
|
|
exists to the Remote ATMARP Server or
|
|
otherwise down(2), and the agent should not
|
|
allow a SET operation to this object."
|
|
|
|
OBJECT ipoaConfigPvcDefaultMtu
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The agent is not required to support a SET
|
|
operation to this object in the absence of
|
|
adequate security."
|
|
|
|
OBJECT ipoaLisRowStatus
|
|
SYNTAX INTEGER {
|
|
active(1) -- subset of RowStatus
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, and only one
|
|
of the six enumerated values for the
|
|
RowStatus textual convention need be
|
|
supported, specifically: active(1)."
|
|
|
|
OBJECT ipoaArpClientRowStatus
|
|
SYNTAX INTEGER {
|
|
active(1) -- subset of RowStatus
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, and only one
|
|
of the six enumerated values for the
|
|
RowStatus textual convention need be
|
|
supported, specifically: active(1)."
|
|
|
|
OBJECT ipoaArpRemoteSrvrRowStatus
|
|
SYNTAX INTEGER {
|
|
active(1) -- subset of RowStatus
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, and only one
|
|
of the six enumerated values for the
|
|
RowStatus textual convention need be
|
|
supported, specifically: active(1)."
|
|
|
|
OBJECT ipoaArpSrvrRowStatus
|
|
SYNTAX INTEGER {
|
|
active(1) -- subset of RowStatus
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, and only one
|
|
of the six enumerated values for the
|
|
RowStatus textual convention need be
|
|
supported, specifically: active(1)."
|
|
|
|
OBJECT ipoaConfigPvcRowStatus
|
|
SYNTAX INTEGER {
|
|
active(1) -- subset of RowStatus
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, and only one
|
|
of the six enumerated values for the
|
|
RowStatus textual convention need be
|
|
supported, specifically: active(1)."
|
|
|
|
OBJECT ipoaArpClientArpOutNaks
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"Classic IP and ARP over ATM does not require
|
|
an ATMARP client to transmit an ATMARP_NAK
|
|
upon receipt of an ATMARP request from another
|
|
ATMARP client. This object should be
|
|
implemented when an ATMARP client supports the
|
|
transmission of ATMARP_NAKs."
|
|
::= { ipoaCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
ipoaGeneralGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ipoaVcType,
|
|
ipoaVcNegotiatedEncapsType,
|
|
ipoaVcNegotiatedMtu,
|
|
ipoaConfigPvcDefaultMtu,
|
|
ipoaConfigPvcRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group is mandatory for all IP over ATM entities."
|
|
::= { ipoaGroups 1 }
|
|
|
|
ipoaClientGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ipoaArpClientAtmAddr,
|
|
ipoaArpClientSrvrInUse,
|
|
ipoaArpClientInArpInReqs,
|
|
ipoaArpClientInArpOutReqs,
|
|
ipoaArpClientInArpInReplies,
|
|
ipoaArpClientInArpOutReplies,
|
|
ipoaArpClientInArpInvalidInReqs,
|
|
ipoaArpClientInArpInvalidOutReqs,
|
|
ipoaArpClientArpInReqs,
|
|
ipoaArpClientArpOutReqs,
|
|
ipoaArpClientArpInReplies,
|
|
ipoaArpClientArpOutReplies,
|
|
ipoaArpClientArpInNaks,
|
|
ipoaArpClientArpOutNaks,
|
|
ipoaArpClientArpUnknownOps,
|
|
ipoaArpClientArpNoSrvrResps,
|
|
ipoaArpClientRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group is mandatory for all hosts where an IP
|
|
over ATM client is present."
|
|
::= { ipoaGroups 2 }
|
|
|
|
ipoaSrvrGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ipoaArpSrvrLis,
|
|
ipoaArpSrvrInArpInReqs,
|
|
ipoaArpSrvrInArpOutReqs,
|
|
ipoaArpSrvrInArpInReplies,
|
|
ipoaArpSrvrInArpOutReplies,
|
|
ipoaArpSrvrInArpInvalidInReqs,
|
|
ipoaArpSrvrInArpInvalidOutReqs,
|
|
ipoaArpSrvrArpInReqs,
|
|
ipoaArpSrvrArpOutReplies,
|
|
ipoaArpSrvrArpOutNaks,
|
|
ipoaArpSrvrArpDupIpAddrs,
|
|
ipoaArpSrvrArpUnknownOps,
|
|
ipoaArpSrvrRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group is mandatory for all hosts where ATMARP
|
|
Servers are present."
|
|
::= { ipoaGroups 3 }
|
|
|
|
ipoaBasicNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ipoaMtuExceeded
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification which an IP over ATM entity
|
|
is required to implement."
|
|
::= { ipoaGroups 4 }
|
|
|
|
ipoaSrvrNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ipoaDuplicateIpAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification which an IP over ATM ATMARP
|
|
Server is required to implement."
|
|
::= { ipoaGroups 5 }
|
|
|
|
ipoaLisNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ipoaLisCreate,
|
|
ipoaLisDelete
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LIS-related notifications which are required
|
|
to be implemented by an IP over ATM ATMARP server,
|
|
as well as by any IP over ATM client which allows
|
|
ipoaLisTrapEnable to be set to enabled(1)."
|
|
::= { ipoaGroups 6 }
|
|
|
|
ipoaLisTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ipoaLisTrapEnable,
|
|
ipoaLisSubnetAddr,
|
|
ipoaLisDefaultMtu,
|
|
ipoaLisDefaultEncapsType,
|
|
ipoaLisInactivityTimer,
|
|
ipoaLisMinHoldingTime,
|
|
ipoaLisQDepth,
|
|
ipoaLisMaxCalls,
|
|
ipoaLisCacheEntryAge,
|
|
ipoaLisRetries,
|
|
ipoaLisTimeout,
|
|
ipoaLisDefaultPeakCellRate,
|
|
ipoaLisActiveVcs,
|
|
ipoaLisRowStatus,
|
|
ipoaLisIfMappingRowStatus,
|
|
ipoaArpRemoteSrvrRowStatus,
|
|
ipoaArpRemoteSrvrIpAddr,
|
|
ipoaArpRemoteSrvrAdminStatus,
|
|
ipoaArpRemoteSrvrOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group is mandatory for all entities which
|
|
support IP over ATM SVCs. Support of objects in
|
|
this group by IP over ATM clients which only
|
|
support IP over ATM PVCs is optional."
|
|
::= { ipoaGroups 7 }
|
|
|
|
END
|