WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/rfc/DOCS-IF31-MIB

4161 lines
165 KiB
Plaintext
Raw Blame History

DOCS-IF31-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Unsigned32,
Counter32,
Counter64
FROM SNMPv2-SMI -- RFC 2578
TEXTUAL-CONVENTION,
TruthValue,
DateAndTime,
TimeStamp
FROM SNMPv2-TC -- RFC 2579
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF -- RFC 2580
CounterBasedGauge64
FROM HCNUM-TC -- RFC 2865
ifIndex
FROM IF-MIB -- RFC 2863
TenthdBmV
FROM DOCS-IF-MIB -- RFC 4546
clabProjDocsis
FROM CLAB-DEF-MIB
docsIf3CmtsCmRegStatusId,
docsIf3CmtsCmRegStatusEntry,
docsIf3RxChStatusEntry,
AttributeMask,
RangingState,
IfDirection,
ChId
FROM DOCS-IF3-MIB;
docsIf31Mib MODULE-IDENTITY
LAST-UPDATED "201603100000Z" -- March 10, 2016
ORGANIZATION "Cable Television Laboratories, Inc."
CONTACT-INFO
"
Postal: Cable Television Laboratories, Inc.
858 Coal Creek Circle
Louisville, Colorado 80027-9750
U.S.A.
Phone: +1 303-661-9100
Fax: +1 303-661-9199
E-mail: mibs@cablelabs.com"
DESCRIPTION
"This MIB module contains the management objects for the
management of DOCSIS 3.1 features, primarily OFDM and OFDMA
channels.
Copyright 2016 Cable Television Laboratories, Inc.
All rights reserved."
REVISION "201603100000Z" -- March 10, 2016
DESCRIPTION
"Revised Version includes ECN
CCAP-OSSIv3.1-N-1432-3."
REVISION "201511040000Z" -- November 4, 2015
DESCRIPTION
"Revised per CM-OSSIv3.1-N-15.1385-3,
which rolls up changes from the following ECNs:
CM-OSSIv3.1-N-15.1375-1 and CCAP-OSSIv3.1-N-15.1376-1,
adding additional indices for the
docsIf31CmUsOfdmaMinislotCfgStateTable per the OSSI-CM spec."
REVISION "201507150000Z" -- July 15, 2015
DESCRIPTION
"Revised Version includes ECN
CCAP-OSSIv3.1-N-15.1324-1"
REVISION "201505200000Z" -- May 20, 2015
DESCRIPTION
"Revised Version includes ECN
CCAP-OSSIv3.1-N-15.1308-2
Synchronized with
CM-SP-CM-OSSIv3.1-I04 and
CM-SP-CCAP-OSSIv3.1-I04"
REVISION "201504080000Z" -- April 8, 2015
DESCRIPTION
"Initial version, per CCAP-OSSIv3.1-N-15.1278-4"
::= { clabProjDocsis 28 }
-- Textual Conventions
ClabsDocsisVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the DOCSIS Radio Frequency specification being
referenced.
'docsis10' indicates DOCSIS 1.0.
'docsis11' indicates DOCSIS 1.1.
'docsis20' indicates DOCSIS 2.0.
'docsis30' indicates DOCSIS 3.0.
'docsis31' indicates DOCSIS 3.1."
SYNTAX INTEGER {
other (0),
docsis10 (1),
docsis11 (2),
docsis20 (3),
docsis30 (4),
docsis31 (5)
}
EmIdList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x,"
STATUS current
DESCRIPTION
"A list of Energy Management Ids displayed as a comma-separated
list of 15-bit hexidecimal values. These values are encoded into
16-bits but the high-order bit is always 0."
SYNTAX OCTET STRING (SIZE ( 0 | 2 | 4 | 6 ))
SubcarrierSpacingType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This data type defines the subcarrier spacing for the FFT
mode in use. For downstream OFDM channels, if the FFT mode
is 4K mode, then spacing is 50 kHz; if it is 8K mode, then
the spacing is 25 kHz. For upstream OFDMA channels, if the
FFT mode is 2K mode, then the spacing is 50kHz; if the mode
is 4K mode, then the spacing is 25kHz. In units of kHz."
REFERENCE
"DOCSIS 3.1 Physical Layer Specification CM-SP-PHYv3.1-I03-140610,
Downstream OFDM Parameters and Upstream OFDMA Parameters tables."
SYNTAX Integer32 ( 25 | 50 )
PrimaryDsIndicatorType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is defined to represent the channel indicator
type for the downstream channel."
SYNTAX INTEGER {
other(1),
primary(2),
backupPrimary(3),
nonPrimary(4)
}
DsOfdmCyclicPrefix ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This data type is defined to indicate the five possible values
for the length of cyclic prefix. The cyclic prefix (in usec) are
converted into samples using the sample rate of 204.8 Msamples/s
and is an integer multiple of: 1/64 * 20 us."
SYNTAX Unsigned32 (192 | 256 | 512 | 768 | 1024)
UsOfdmaCyclicPrefix ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This data type is defined to indicate the eleven possible values
for the length of cyclic prefix. The cyclic prefix (in usec) are
converted into samples using the sample rate of 102.4 Msamples/s
and is an integer multiple of: 1/64 * 20us."
SYNTAX Unsigned32 (96 | 128 | 160 | 192 | 224 | 256 | 288 | 320 |
384 | 512 | 640)
DsOfdmRollOffPeriod ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This data type is defined to indicate the five possible values
for the windowing roll-off period. The Roll-Off Period is
given in microseconds (usec)."
SYNTAX Unsigned32 (0 | 64 | 128 | 192 | 256)
UsOfdmaRollOffPeriod ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This data type is defined to indicate the eight possible values
for the windowing roll-off period. The Roll-Off Period is given
in microseconds."
SYNTAX Unsigned32 (0 | 32 | 64 | 96 | 128 | 160 | 192 | 224)
TimeInterleaverDepth ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This data type is defined to indicate the depth of time
interleaving used for this downstream channel in symbols."
SYNTAX Unsigned32 (1..32)
DsOfdmModulationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is defined to indicate the bit loading of
subcarriers in an OFDM downstream channel."
REFERENCE
"DOCSIS 3.1 Physical layer Specification CM-SP-PHYv3.1-I03-140610,
Modulation Formats section."
SYNTAX INTEGER {
other(1),
zeroValued(2),
qpsk(3),
qam16(4),
qam64(5),
qam128(6),
qam256(7),
qam512(8),
qam1024(9),
qam2048(10),
qam4096(11),
qam8192(12),
qam16384(13)
}
UsOfdmaModulationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is defined to indicate the bit loading of
subcarriers in an OFDMA upstream channel."
REFERENCE
"DOCSIS 3.1 Physical layer Specification CM-SP-PHYv3.1-I03-140610,
Modulation Formats section."
SYNTAX INTEGER {
other(1),
zeroValued(2),
bpsk(3),
qpsk(4),
qam8(5),
qam16(6),
qam32(7),
qam64(8),
qam128(9),
qam256(10),
qam512(11),
qam1024(12),
qam2048(13),
qam4096(14)
}
PartialChannelType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type enumerates each of the possible profiles or channel
attributes which can contribute to an OFDM channel being considered
a Partial Channel by the MAC layer. As more than one of these error
conditions can exist at the same time this data type is based on a
BITS data type. The bits from low to high are:
Bit 0: lostFecLockDsProfile
Bit 1: lostFecLockNcpProfile
Bit 2: lostFecLockPlc
Bit 3: lostFecLockUsProfile"
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.1-I03-140610,
CM Status Report section."
SYNTAX BITS {
lostFecLockDsProfile(0),
lostFecLockNcpProfile(1),
lostFecLockPlc(2),
lostFecLockUsProfile(3)
}
PartialServiceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type enumerates the type of channel issue which the
MAC Layer indicates is causing the CM to be in DOCSIS 3.0 Partial
Service mode. The possible values are as follows:
other(1)
none(2)
partialSvcDsOnlyImpaired(3)
partialSvcUsOnlyImpaired(4)
partialSvcDsAndUsImpaired(5)"
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.1-I03-140610,
CM Status Report section."
SYNTAX INTEGER {
other(1),
none(2),
partialSvcDsOnlyImpaired(3),
partialSvcUsOnlyImpaired(4),
partialSvcDsAndUsImpaired(5)
}
PartialChanReasonType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type enumerates the CM-STATUS events which
a CM can utilize to report a Partial Channel situation."
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.1-I03-140610,
CM Status Report section."
SYNTAX INTEGER {
none(0),
dsOfdmProfileFailure(16),
dpdMismatch(18),
invalidDpd(19),
ncpProfileFailure(20),
lostFecLockPlc(21),
ofdmaProfileFailure(25)
}
PartialSvcReasonType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type enumerates the CM-STATUS events which
a CM can utilize to report a Partial Service situation."
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.1-I03-140610,
CM Status Report section."
SYNTAX INTEGER {
none(0),
secondaryChanMddTimeout(1),
lostFecLock(2)
}
HundredthdBmV ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-2"
STATUS current
DESCRIPTION
"This data type represents power levels that are normally
expressed in dBmV. Units are in hundredths of a dBmV;
for example, 5.17 dBmV will be represented as 517."
SYNTAX Integer32
HundredthdB ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-2"
STATUS current
DESCRIPTION
"This data type represents power levels that are normally
expressed in dB. Units are in hundredths of a dB;
for example, 5.17 dB will be represented as 517."
SYNTAX Integer32
-- Object Definitions
docsIf31Notifications OBJECT IDENTIFIER ::= { docsIf31Mib 0 }
docsIf31MibObjects OBJECT IDENTIFIER ::= { docsIf31Mib 1 }
--
-- Notifications
--
-- DOCSIS 3.1 events are sent in DOCS-IF3-MIB notification objects.
-- Specifically docsIf3CmtsEventNotif for CCAP events and
-- docsIf3CmEventNotif for CM events
--
-- ***************************************************************
--
-- RFC-4546 Objects & Tables
--
-- The DOCS-IF-MIB defined in RFC-4546 has a number of tables which
-- cannot be readily adapted to support OFDM channels. After much
-- consideration the D3.1 OSSI Working Group decided that it was
-- preferable to create completely new tables for D3.1 OFDM/OFDMA
-- channels than to augment or otherwise extend the original tables
-- where few, if any, columns were applicable to the new modulation
-- types. To ease the transition to D3.1, rules were developed for
-- rows to be included in the original tables, but with dummy values.
--
-- The tables in this MIB contain meaningful values for OFMD channels
-- and should be used instead of values in RFC-4546 tables. For
-- additional information refer to:
--
-- DOCSIS 3.1 Cable Modem Operations Support System Interface
-- Specification CM-SP-CM-OSSIv3.1-I03-15MMDD
--
-- Tables from RFC-4546 which are not used for OFDM channels include:
-- docsIfDownChannelTable
-- docsIfUpChannelTable
-- docsIfCmtsModulationTable
-- docsIfCmtsChannelUtilizationTable
-- docsIfCmtsDownChannelCtrTable
-- docsIfCmtsUpChannelCtrTable
--
-- The only other table from RFC-4546 which is supported as documented
-- by a D3.1 CCAP is:
-- docsIfCmtsMacToCmTable
--
-- ***************************************************************
docsIf31CmDocsisBaseCapability OBJECT-TYPE
SYNTAX ClabsDocsisVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indication of the DOCSIS capability of the device.
This replaces docsIfDocsisBaseCapability for D3.1 CMs."
::= { docsIf31MibObjects 1 }
-- ***************************************************************
--
-- DOCS-IF3-MIB Extensions
--
-- ***************************************************************
--
-- Extensions to the docsIf3RxChStatusTable
--
docsIf31RxChStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31RxChStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Receive Channel Status object reports the status
of the statically-configured and dynamically-created
Receive Channels within an RCC.
This extends the DOCS-IF3-MIB's docsIf3RxChStatusTable."
::= { docsIf31MibObjects 2 }
docsIf31RxChStatusEntry OBJECT-TYPE
SYNTAX DocsIf31RxChStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31RxChStatusTable."
AUGMENTS {
docsIf3RxChStatusEntry
}
::= { docsIf31RxChStatusTable 1 }
DocsIf31RxChStatusEntry ::= SEQUENCE {
docsIf31RxChStatusPrimaryDsIndicator PrimaryDsIndicatorType
}
docsIf31RxChStatusPrimaryDsIndicator OBJECT-TYPE
SYNTAX PrimaryDsIndicatorType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is used to identify the downstream channel
as primary, backup primary or non-primary. A value of
'primary(2)' indicates that OFDM channel is assigned to be the
CM's primary downstream channel. A value of 'backupPrimary(3)'
indicates that the OFDM channel is assigned to be the CM's
backup primary downstream channel. A value of 'nonPrimary(4)'
indicates the OFDM channel is not assigned to be CM's primary
or backup primary downstream channel."
::= { docsIf31RxChStatusEntry 1 }
--
-- Extensions to the docsIf3CmtsCmRegStatusTable
--
docsIf31CmtsCmRegStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsCmRegStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines attributes that represent the CM's
registration status as tracked by the CMTS.
Refer to the individual attribute definitions for
applicability to 3.0 and 3.1 Cable Modems.
This extends the DOCS-IF3-MIB's docsIf3CmtsCmRegStatusTable."
::= { docsIf31MibObjects 3 }
docsIf31CmtsCmRegStatusEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsCmRegStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsCmRegStatusTable."
AUGMENTS {
docsIf3CmtsCmRegStatusEntry
}
::= { docsIf31CmtsCmRegStatusTable 1 }
DocsIf31CmtsCmRegStatusEntry ::= SEQUENCE {
docsIf31CmtsCmRegStatusAssignedEmIds EmIdList,
docsIf31CmtsCmRegStatusDsProfileIdList OCTET STRING,
docsIf31CmtsCmRegStatusUsProfileIucList OCTET STRING,
docsIf31CmtsCmRegStatusTcsPhigh Unsigned32,
docsIf31CmtsCmRegStatusTcsDrwTop Unsigned32,
docsIf31CmtsCmRegStatusMinUsableDsFreq Unsigned32,
docsIf31CmtsCmRegStatusMaxUsableDsFreq Unsigned32,
docsIf31CmtsCmRegStatusMaxUsableUsFreq Unsigned32,
docsIf31CmtsCmRegStatusPartialSvcState PartialServiceType,
docsIf31CmtsCmRegStatusPartialChanState PartialChannelType
}
docsIf31CmtsCmRegStatusAssignedEmIds OBJECT-TYPE
SYNTAX EmIdList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports the set of CMTS-assigned EM-IDs for
this CM. This attribute is encoded as an array 16-bit binary
values with up to 3 elements. The broadcast EM-ID is not
included in the list.
If the EM-ID is unknown the CMTS returns a zero length string.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is a pre-DOCSIS 3.1 modem,
the CMTS returns a zero length string."
::= { docsIf31CmtsCmRegStatusEntry 1 }
docsIf31CmtsCmRegStatusDsProfileIdList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0 | 3..72))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is a variable length series of hexadecimal
octets where each series entry consists of the following fields
(encoded in the following order):
- The Channel Id (1 octet) of the OFDM channel where the
downstream Profile Ids are assigned.
- The number or count of Profile Ids (1 octet with valid values
of 1-4) assigned to the CM on that channel.
- The list of Profile Ids (1 octet each with valid values of
0-15) assigned to this CM on that channel. Profile Id 0 is
commonly referred to as Profile A. Likewise, Profile Ids 1,
2 and 3 are commonly referred to as Profiles B, C and D.
The CCAP encodes each OFDM channel in a CM's RCS as a separate
n-octet entry in the ProfileIdList.
Examples: a CM with a single OFDM channel (channel id 34) and
four assigned profiles (Profile Ids 0, 8, 9 and 10) would
have a ProfileIdList value of 0x22040008090A. A CM with a 2 OFDM
channel bonding group each with two assigned profiles (Profile
Ids 0 and 15 on channel 34 and Profile Ids 0 and 14 on channel
35) would have a ProfileIdList value of 0x2202000F2302000E).
Note: the CCAP must not include the transitional profile or
test profile in the ProfileIdList.
Note that octet string lengths greater than 12 are optional.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is a pre-DOCSIS 3.1 modem,
the CMTS returns a zero length octet string."
::= { docsIf31CmtsCmRegStatusEntry 2 }
docsIf31CmtsCmRegStatusUsProfileIucList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0 | 3..72))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is a variable length series of hexadecimal
octets where each series entry consists of the following fields
(encoded in the following order):
- The Channel Id (1 octet) of the OFDMA channel where the
Profile IUCs are assigned.
- The number or count of Data IUCs (1 octet with valid values
of 1-2) assigned to this CM on that channel.
- The list of Data IUCs (1 octet each with valid values of
5, 6, 9-13) assigned to this CM on that channel.
The CCAP encodes each OFDMA channel in a CM's TCS as a separate
n-octet entry in the UsProfileIucList.
Examples: a CM with a single OFDMA channel (channel id 36) and two
assigned Data IUCs (5 and 6) would have a ProfileIdList value of
0x24020506. A CM with a 2 OFDMA channel bonding group each with one
assigned Data IUC (IUC 5 on channel 34 and IUC 13 on channel 35)
would have a UsProfileIucList value of 0x22010523010D).
Note: the CCAP MUST NOT include transitional IUCs or test IUCs in
the UsProfileIucList.
Note that octet string lengths greater than 12 are optional.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is a pre-DOCSIS 3.1 modem,
the CMTS returns a zero length octet string."
::= { docsIf31CmtsCmRegStatusEntry 3 }
docsIf31CmtsCmRegStatusTcsPhigh OBJECT-TYPE
SYNTAX Unsigned32 (0 | 68..320)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports the P1.6hi value for the CM's Transmit
Channel Set.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is a pre-DOCSIS 3.1 modem,
the CMTS returns zero."
::= { docsIf31CmtsCmRegStatusEntry 4 }
docsIf31CmtsCmRegStatusTcsDrwTop OBJECT-TYPE
SYNTAX Unsigned32
UNITS "dBmV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports the level of the top of the Dynamic Range
Window. The value is expressed in dBmV and is the result of a
calculation equal to P1.6hi - P1.6load_min_set.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is a pre-DOCSIS 3.1 modem,
the CMTS returns zero."
::= { docsIf31CmtsCmRegStatusEntry 5 }
docsIf31CmtsCmRegStatusMinUsableDsFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the higher of the CCAP's minimum supported
downstream frequency and the CM's minimum supported downstream
frequency. It indicates the lowest downstream frequency the
CCAP can use to communicate with this CM taking into account
the capabilities of both devices.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is a pre-DOCSIS 3.1 modem,
the CMTS returns zero."
::= { docsIf31CmtsCmRegStatusEntry 6 }
docsIf31CmtsCmRegStatusMaxUsableDsFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the lower of the CCAP's maximum supported
downstream frequency and the CM's maximum supported downstream
frequency. It indicates the highest downstream frequency the
CCAP can use to communicate with this CM taking into account
the capabilities of both devices.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is a pre-DOCSIS 3.1 modem,
the CMTS returns zero."
::= { docsIf31CmtsCmRegStatusEntry 7 }
docsIf31CmtsCmRegStatusMaxUsableUsFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the lower of the CCAP's maximum supported
upstream frequency and the CM's maximum supported upstream
frequency. It indicates the highest upstream frequency the CCAP
can use to receive signals from this CM taking into account the
capabilities of both devices.
Note: there is no minimum usable upstream frequency attribute as
this is 5MHz for both CCAP and CM devices.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is a pre-DOCSIS 3.1 modem,
the CMTS returns zero."
::= { docsIf31CmtsCmRegStatusEntry 8 }
docsIf31CmtsCmRegStatusPartialSvcState OBJECT-TYPE
SYNTAX PartialServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the type of 'bonding group' issue
that this CM is experiencing, based on what the MAC-layer
shows. See PartialServiceType for further detail.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is a pre-DOCSIS 3.1 modem,
the CMTS returns 'other'."
::= { docsIf31CmtsCmRegStatusEntry 9 }
docsIf31CmtsCmRegStatusPartialChanState OBJECT-TYPE
SYNTAX PartialChannelType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is a bit-field which indicates the type of OFDM
channel issue that this CM is experiencing, based on what the
MAC-layer shows. See PartialChannelType for further detail.
This object is applicable to DOCSIS 3.1 modems but not to prior
versions of DOCSIS modems. If the CM is a pre-DOCSIS 3.1 modem,
the CMTS returns 0x0 (no bits set)."
::= { docsIf31CmtsCmRegStatusEntry 10 }
-- ***************************************************************
--
-- DOCSIS 3.1 MIB Objects
--
-- ***************************************************************
docsIf31CmtsCmUsOfdmaChannelStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsCmUsOfdmaChannelStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines current status information of the CM
on each OFDMA upstream channel, as reported by the CMTS."
::= { docsIf31MibObjects 4 }
docsIf31CmtsCmUsOfdmaChannelStatusEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsCmUsOfdmaChannelStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsCmUsOfdmaChannelStatusTable.
A separate entry exists for every OFDMA channel of every CM
currently assigned to an OFDMA channel."
INDEX {
docsIf3CmtsCmRegStatusId,
ifIndex
}
::= { docsIf31CmtsCmUsOfdmaChannelStatusTable 1 }
DocsIf31CmtsCmUsOfdmaChannelStatusEntry ::= SEQUENCE {
docsIf31CmtsCmUsOfdmaChannelRxPower TenthdBmV,
docsIf31CmtsCmUsOfdmaChannelMeanRxMer HundredthdB,
docsIf31CmtsCmUsOfdmaChannelStdDevRxMer HundredthdB,
docsIf31CmtsCmUsOfdmaChannelRxMerThreshold Unsigned32,
docsIf31CmtsCmUsOfdmaChannelThresholdRxMerValue HundredthdB,
docsIf31CmtsCmUsOfdmaChannelThresholdRxMerHighestFreq Unsigned32,
docsIf31CmtsCmUsOfdmaChannelMicroreflections Unsigned32,
docsIf31CmtsCmUsOfdmaChannelHighResolutionTimingOffset Integer32,
docsIf31CmtsCmUsOfdmaChannelIsMuted TruthValue,
docsIf31CmtsCmUsOfdmaChannelRangingStatus RangingState,
docsIf31CmtsCmUsOfdmaChannelCurPartialSvcReasonCode PartialSvcReasonType,
docsIf31CmtsCmUsOfdmaChannelLastPartialSvcTime DateAndTime,
docsIf31CmtsCmUsOfdmaChannelLastPartialSvcReasonCode PartialSvcReasonType,
docsIf31CmtsCmUsOfdmaChannelNumPartialSvcIncidents Counter32,
docsIf31CmtsCmUsOfdmaChannelNumPartialChanIncidents Counter32
}
docsIf31CmtsCmUsOfdmaChannelRxPower OBJECT-TYPE
SYNTAX TenthdBmV
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the total received power in a specified
OFDMA channel, normalized to power in a 1.6 MHz bandwidth, at
the RF input port of the CMTS for a given CM."
REFERENCE
"DOCSIS 3.1 Physical layer Specification CM-SP-PHYv3.1-I03-140610,
Upstream Channel Power section."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 1 }
docsIf31CmtsCmUsOfdmaChannelMeanRxMer OBJECT-TYPE
SYNTAX HundredthdB
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the mean of the dB values of the RxMER
measurements of all active subcarriers. The mean is computed
directly on the dB values as follows:
Mean = sum of (RxMER dB values) / number of RxMER values"
REFERENCE
"DOCSIS 3.1 Physical layer Specification CM-SP-PHYv3.1-I03-140610,
Upstream Receive Modulation Error Ratio (RxMER) Per Subcarrier
section."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 2 }
docsIf31CmtsCmUsOfdmaChannelStdDevRxMer OBJECT-TYPE
SYNTAX HundredthdB
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the standard deviation of the dB values of
the RxMER measurements of all active subcarriers. The standard
deviation is computed directly on the dB values as follows:
StdDev = sqrt(sum of (RxMER dB vals - RxMER_mean)^2 / # RxMER vals)"
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 3 }
docsIf31CmtsCmUsOfdmaChannelRxMerThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "percentile"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the percentile (such as 2nd percentile
or 5th percentile) of all active subcarriers in an OFDM channel
at which the ThresholdRxMerValue occurs. That is, (Percentile) %
of the subcarriers have RxMER <= ThresholdRxMerValue."
DEFVAL { 2 }
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 4 }
docsIf31CmtsCmUsOfdmaChannelThresholdRxMerValue OBJECT-TYPE
SYNTAX HundredthdB
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the RxMER value corresponding to the specified
docsIf31CmtsCmUsOfdmaChannelRxMerThreshold percentile value. The
CCAP sorts the subcarriers in ascending order of RxMER, resulting
in a post-sorting subcarrier index ranging from 1 to the number of
active subcarriers. If the percentile value corresponds to a non-
integer post-sorting subcarrier index, the post-sorting index is
truncated (floor function is applied); that is, the post-sorting
index is selected which is the greatest integer less than or equal
to the corresponding percentile value. For example, if there are
3677 active subcarriers and the 2nd percentile is specified, the
CCAP computes floor(3677*0.02) = 73. That is, the RxMER value of
the 73rd subcarrier in the sorted list is associated with the 2nd
percentile.
This is displayed in hundredth of a dB, but is only accurate to
a quarter dB."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 5 }
docsIf31CmtsCmUsOfdmaChannelThresholdRxMerHighestFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the frequency in Hz of the highest-frequency
subcarrier having RxMER = ThresholdRxMer value."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 6 }
docsIf31CmtsCmUsOfdmaChannelMicroreflections OBJECT-TYPE
SYNTAX Unsigned32
UNITS "dBc"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents microreflections received on this
upstream channel in dBc."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 7 }
docsIf31CmtsCmUsOfdmaChannelHighResolutionTimingOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "time tick/(64*256)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the current measured round trip
time on this CM's upstream channel in units of
(6.25 microseconds/(64*256)).
This attribute returns zero if the value is unknown."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 8 }
docsIf31CmtsCmUsOfdmaChannelIsMuted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute has a value 'true' to indicate that the CM's
upstream channel has been muted via CM-CTRL-REQ/CM-CTRL-RSP
message exchange."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 9 }
docsIf31CmtsCmUsOfdmaChannelRangingStatus OBJECT-TYPE
SYNTAX RangingState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute denotes the ranging state of the CM."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 10 }
docsIf31CmtsCmUsOfdmaChannelCurPartialSvcReasonCode OBJECT-TYPE
SYNTAX PartialSvcReasonType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the current CM-STATUS Event Code which
indicates the reason that this CM is experiencing Partial Service
with a bonding group utilizing this upstream OFDMA channel. A
value of 0 indicates that the CM is not currently experiencing
Partial Service involving this OFDMA channel."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 11 }
docsIf31CmtsCmUsOfdmaChannelLastPartialSvcTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the date and time when the MAC indicated
that this CM recovered from its most recent Partial Service
incident on this upstream OFDMA channel."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 12 }
docsIf31CmtsCmUsOfdmaChannelLastPartialSvcReasonCode OBJECT-TYPE
SYNTAX PartialSvcReasonType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the last CM-STATUS Event Code which
indicates the reason that this CM was experiencing Partial
Service on this upstream OFDMA channel. (Note: if the CM is
currently experiencing Partial Service, this is the Event Code
from the previous Partial Service event.) A value of 0 indicates
that the CM has not experienced Partial Service involving this
OFDMA channel during the CCAP's history of this CM."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 13 }
docsIf31CmtsCmUsOfdmaChannelNumPartialSvcIncidents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the number of Partial Service incidents
the MAC layer has reported for this CM on this upstream OFDMA
channel."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 14 }
docsIf31CmtsCmUsOfdmaChannelNumPartialChanIncidents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attributes returns the number of Partial Channel incidents
the MAC layer has reported for this CM on this upstream OFDMA
channel."
::= { docsIf31CmtsCmUsOfdmaChannelStatusEntry 15 }
docsIf31CmtsCmUsOfdmaProfileStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsCmUsOfdmaProfileStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines current status information of the CM on
each OFDMA upstream channel profile, as reported by the CMTS."
::= { docsIf31MibObjects 5 }
docsIf31CmtsCmUsOfdmaProfileStatusEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsCmUsOfdmaProfileStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsCmUsOfdmaProfileStatusTable.
A separate entry exists for every Data IUC assigned to the CM
for every OFDMA channel of every CM currently assigned to an
OFDMA channel."
INDEX {
docsIf3CmtsCmRegStatusId,
ifIndex,
docsIf31CmtsUsOfdmaDataIucStatsDataIuc
}
::= { docsIf31CmtsCmUsOfdmaProfileStatusTable 1 }
DocsIf31CmtsCmUsOfdmaProfileStatusEntry ::= SEQUENCE {
docsIf31CmtsCmUsOfdmaProfileTotalCodewords Counter64,
docsIf31CmtsCmUsOfdmaProfileCorrectedCodewords Counter64,
docsIf31CmtsCmUsOfdmaProfileUnreliableCodewords Counter64,
docsIf31CmtsCmUsOfdmaProfileLastPartialChanTime DateAndTime,
docsIf31CmtsCmUsOfdmaProfileLastPartialChanReasonCode PartialChanReasonType,
docsIf31CmtsCmUsOfdmaProfilePartialChanReasonCode PartialChanReasonType
}
docsIf31CmtsCmUsOfdmaProfileTotalCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the count of the total number
of FEC codewords received from the CM on this Profile/Data
IUC for this upstream OFDMA channel.
Discontinuities in the value of this counter can occur at
re-initialization of the managed system, and at other times
as indicated by the value of ifCounterDiscontinuityTime for
the associated upstream OFDMA channel"
::= { docsIf31CmtsCmUsOfdmaProfileStatusEntry 1 }
docsIf31CmtsCmUsOfdmaProfileCorrectedCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the count of codewords received
that failed the pre-decoding syndrome check, but passed the
post-decoding syndrome check from the CM on this Profile/Data
IUC for this upstream OFDMA channel.
Discontinuities in the value of this counter can occur at
re-initialization of the managed system, and at other times
as indicated by the value of ifCounterDiscontinuityTime for
the associated upstream OFDMA channel."
::= { docsIf31CmtsCmUsOfdmaProfileStatusEntry 2 }
docsIf31CmtsCmUsOfdmaProfileUnreliableCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the count of codewords that
failed the post-decoding syndrome check received from the
CM on this Profile/Data IUC for this upstream OFDMA channel.
Discontinuities in the value of this counter can occur at
re-initialization of the managed system, and at other times
as indicated by the value of ifCounterDiscontinuityTime for
the associated upstream OFDMA channel."
::= { docsIf31CmtsCmUsOfdmaProfileStatusEntry 3 }
docsIf31CmtsCmUsOfdmaProfileLastPartialChanTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the date and time when the MAC
indicated that this CM recovered from its most recent
Partial Channel incident on this upstream OFDMA channel."
::= { docsIf31CmtsCmUsOfdmaProfileStatusEntry 4 }
docsIf31CmtsCmUsOfdmaProfileLastPartialChanReasonCode OBJECT-TYPE
SYNTAX PartialChanReasonType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the current CM-STATUS Event Code
which indicates the reason that this CM is in a Partial
Channel state utilizing this Profile/Data IUC on this upstream
OFDMA channel. A value of 0 indicates that the CM is not
currently experiencing a Partial Channel event with this Data
IUC on this OFDMA channel."
::= { docsIf31CmtsCmUsOfdmaProfileStatusEntry 5 }
docsIf31CmtsCmUsOfdmaProfilePartialChanReasonCode OBJECT-TYPE
SYNTAX PartialChanReasonType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the current CM-STATUS Event Code
which indicates the reason that this CM is in a Partial
Channel state utilizing this Profile/Data IUC on this
upstream OFDMA channel. A value of 0 indicates that the
CM is not currently experiencing a Partial Channel event
with this Data IUC on this OFDMA channel."
::= { docsIf31CmtsCmUsOfdmaProfileStatusEntry 6 }
docsIf31CmtsCmDsOfdmChannelStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsCmDsOfdmChannelStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines current status information of the CM
on each OFDM downstream channel, as reported by the CMTS.
A separate entry exists for every OFDMA channel of every CM
currently assigned to an OFDMA channel."
::= { docsIf31MibObjects 6 }
docsIf31CmtsCmDsOfdmChannelStatusEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsCmDsOfdmChannelStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsCmDsOfdmChannelStatusTable."
INDEX {
docsIf3CmtsCmRegStatusId,
ifIndex
}
::= { docsIf31CmtsCmDsOfdmChannelStatusTable 1 }
DocsIf31CmtsCmDsOfdmChannelStatusEntry ::= SEQUENCE {
docsIf31CmtsCmDsOfdmChannelCurPartialSvcReasonCode PartialSvcReasonType,
docsIf31CmtsCmDsOfdmChannelLastPartialSvcTime DateAndTime,
docsIf31CmtsCmDsOfdmChannelLastPartialSvcReasonCode PartialSvcReasonType,
docsIf31CmtsCmDsOfdmChannelNumPartialSvcIncidents Counter32,
docsIf31CmtsCmDsOfdmChannelNumPartialChanIncidents Counter32
}
docsIf31CmtsCmDsOfdmChannelCurPartialSvcReasonCode OBJECT-TYPE
SYNTAX PartialSvcReasonType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the current CM-STATUS Event Code
which indicates the reason that this CM is experiencing
Partial Service with a bonding group utilizing this downstream
OFDM channel. A value of 0 indicates that the CM is not
currently experiencing Partial Service involving this OFDM channel."
::= { docsIf31CmtsCmDsOfdmChannelStatusEntry 1 }
docsIf31CmtsCmDsOfdmChannelLastPartialSvcTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the date and time when the MAC
indicated that this CM recovered from its most recent
Partial Service incident on this downstream OFDM channel."
::= { docsIf31CmtsCmDsOfdmChannelStatusEntry 2 }
docsIf31CmtsCmDsOfdmChannelLastPartialSvcReasonCode OBJECT-TYPE
SYNTAX PartialSvcReasonType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the last CM-STATUS Event Code which
indicates the reason that this CM was experiencing Partial
Service on this downstream OFDM channel. (Note: if the CM is
currently experiencing Partial Service, this is the Event Code
from the previous Partial Service event.)
A value of 0 indicates that the CM has not experienced Partial
Service involving this OFDM channel during the CCAP's history
of this CM."
::= { docsIf31CmtsCmDsOfdmChannelStatusEntry 3 }
docsIf31CmtsCmDsOfdmChannelNumPartialSvcIncidents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the number of Partial Service incidents
the MAC layer has reported for this CM on this downstream OFDM
channel"
::= { docsIf31CmtsCmDsOfdmChannelStatusEntry 4 }
docsIf31CmtsCmDsOfdmChannelNumPartialChanIncidents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the number of Partial Channel incidents
the MAC layer has reported for this CM on this downstream OFDM
channel"
::= { docsIf31CmtsCmDsOfdmChannelStatusEntry 5 }
docsIf31CmtsCmDsOfdmProfileStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsCmDsOfdmProfileStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines current status information of the CM on
each OFDMA upstream channel profile, as reported by the CMTS."
::= { docsIf31MibObjects 7 }
docsIf31CmtsCmDsOfdmProfileStatusEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsCmDsOfdmProfileStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsCmDsOfdmProfileStatusTable.
A separate entry exists for every Profile assigned to the CM
for every OFDM channel of every CM currently assigned to an
OFDM channel."
INDEX {
docsIf3CmtsCmRegStatusId,
ifIndex,
docsIf31CmtsDsOfdmProfileStatsProfileId
}
::= { docsIf31CmtsCmDsOfdmProfileStatusTable 1 }
DocsIf31CmtsCmDsOfdmProfileStatusEntry ::= SEQUENCE {
docsIf31CmtsCmDsOfdmProfileTotalCodewords Counter64,
docsIf31CmtsCmDsOfdmProfilePartialChanReasonCode PartialChanReasonType,
docsIf31CmtsCmDsOfdmProfileLastPartialChanTime DateAndTime,
docsIf31CmtsCmDsOfdmProfileLastPartialChanReasonCode PartialChanReasonType
}
docsIf31CmtsCmDsOfdmProfileTotalCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the count of codewords sent
to the CM on this Profile/Data IUC for this downstream
OFDM channel.
Discontinuities in the value of this counter can occur
at re-initialization of the managed system, and at other
times as indicated by the value of ifCounterDiscontinuityTime
for the associated downstream OFDM channel."
::= { docsIf31CmtsCmDsOfdmProfileStatusEntry 1 }
docsIf31CmtsCmDsOfdmProfilePartialChanReasonCode OBJECT-TYPE
SYNTAX PartialChanReasonType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the current CM-STATUS Event Code
which indicates the reason that this CM is in a Partial
Channel state utilizing this Profile on this downstream
OFDM channel.A value of 0 indicates that the CM is not
currently experiencing Partial Channel involving this
Profile on this OFDM channel."
::= { docsIf31CmtsCmDsOfdmProfileStatusEntry 2 }
docsIf31CmtsCmDsOfdmProfileLastPartialChanTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the date and time when the MAC
indicated that this CM recovered from its most recent
Partial Channel incident for this Profile on this downstream
OFDM channel."
::= { docsIf31CmtsCmDsOfdmProfileStatusEntry 3 }
docsIf31CmtsCmDsOfdmProfileLastPartialChanReasonCode OBJECT-TYPE
SYNTAX PartialChanReasonType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute returns the last CM-STATUS Event Code
which indicates the reason that this CM was experiencing
a Partial Channel event for this Profile on this downstream
OFDM channel. A value of 0 indicates that the CM has not
experienced a Partial Channel incident involving this Profile
on this OFDM channel during the CCAP's history of this CM."
::= { docsIf31CmtsCmDsOfdmProfileStatusEntry 4 }
docsIf31CmtsCmEmStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsCmEmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines Energy Management mode statistics for the
CM as reported by the CMTS. For example, such metrics can
provide insight into configuration of appropriate EM 1x1 Mode
Activity Detection thresholds on the CM and/or to get feedback
on how/if the current thresholds are working well or are
causing user experience issues."
::= { docsIf31MibObjects 8 }
docsIf31CmtsCmEmStatsEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsCmEmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsCmEmStatsTable.
A row exists in this table for every CM capable of
Energy Management (either 1x1 or DLS)."
INDEX { docsIf3CmtsCmRegStatusId }
::= { docsIf31CmtsCmEmStatsTable 1 }
DocsIf31CmtsCmEmStatsEntry ::=
SEQUENCE {
docsIf31CmtsCmEmStatsEm1x1ModeTotalDuration Unsigned32,
docsIf31CmtsCmEmStatsDlsModeTotalDuration Unsigned32,
docsIf31CmtsCmEmStatsLastDlsTime DateAndTime,
docsIf31CmtsCmEmStatsDlsWakeupEvents Counter32
}
docsIf31CmtsCmEmStatsEm1x1ModeTotalDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the total time duration, in seconds
since registration, the CM identified by
docsIf3CmtsCmRegStatusId has been in Energy Management 1x1
mode, as controlled by the DBC-REQ Energy Management 1x1
Mode Indicator TLV."
::= { docsIf31CmtsCmEmStatsEntry 1 }
docsIf31CmtsCmEmStatsDlsModeTotalDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the total time duration, in seconds
since registration, the CM identified by
docsIf3CmtsCmRegStatusId has been in DLS mode."
::= { docsIf31CmtsCmEmStatsEntry 2 }
docsIf31CmtsCmEmStatsLastDlsTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the time of the last DLS wakeup
event for this CM. If this CM is currently in DLS mode, then
this attribute returns 0."
::= { docsIf31CmtsCmEmStatsEntry 3 }
docsIf31CmtsCmEmStatsDlsWakeupEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the total number of wakeup events
that this CM has experienced over the CCAP's history for this CM."
::= { docsIf31CmtsCmEmStatsEntry 4 }
docsIf31CmDsOfdmChanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmDsOfdmChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the CM's downstream OFDM channels."
::= { docsIf31MibObjects 9 }
docsIf31CmDsOfdmChanEntry OBJECT-TYPE
SYNTAX DocsIf31CmDsOfdmChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmDsOfdmChanTable.
An entry exists in this table for each ifEntry with an
ifType value of docsOfdmDownstream(277)."
INDEX {
ifIndex
}
::= { docsIf31CmDsOfdmChanTable 1 }
DocsIf31CmDsOfdmChanEntry ::=
SEQUENCE {
docsIf31CmDsOfdmChanChannelId Integer32,
docsIf31CmDsOfdmChanChanIndicator PrimaryDsIndicatorType,
docsIf31CmDsOfdmChanSubcarrierZeroFreq Unsigned32,
docsIf31CmDsOfdmChanFirstActiveSubcarrierNum Unsigned32,
docsIf31CmDsOfdmChanLastActiveSubcarrierNum Unsigned32,
docsIf31CmDsOfdmChanNumActiveSubcarriers Unsigned32,
docsIf31CmDsOfdmChanSubcarrierSpacing SubcarrierSpacingType,
docsIf31CmDsOfdmChanCyclicPrefix DsOfdmCyclicPrefix,
docsIf31CmDsOfdmChanRollOffPeriod DsOfdmRollOffPeriod,
docsIf31CmDsOfdmChanPlcFreq Unsigned32,
docsIf31CmDsOfdmChanNumPilots Unsigned32,
docsIf31CmDsOfdmChanTimeInterleaverDepth TimeInterleaverDepth,
docsIf31CmDsOfdmChanPlcTotalCodewords Counter64,
docsIf31CmDsOfdmChanPlcUnreliableCodewords Counter64,
docsIf31CmDsOfdmChanNcpTotalFields Counter64,
docsIf31CmDsOfdmChanNcpFieldCrcFailures Counter64
}
docsIf31CmDsOfdmChanChannelId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cable Modem Termination System identification of the
OFDM downstream channel within this particular MAC interface.
if the interface is down, the object returns the most
current value. If the downstream channel ID is unknown,
this object returns a value of 0."
::= { docsIf31CmDsOfdmChanEntry 1 }
docsIf31CmDsOfdmChanChanIndicator OBJECT-TYPE
SYNTAX PrimaryDsIndicatorType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is used to identify the OFDM downstream channel
as primary, backup primary or non-primary. A value of
'primary(2)' indicates that OFDM channel is assigned to be the
CM's primary downstream channel. A value of 'backupPrimary(3)'
indicates that the OFDM channel is assigned to be the CM's
backup primary downstream channel. A value of 'nonPrimary(4)'
indicates the OFDM channel is not assigned to be CM's primary
or backup primary downstream channel."
::= { docsIf31CmDsOfdmChanEntry 2 }
docsIf31CmDsOfdmChanSubcarrierZeroFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the center frequency of the
subcarrier 0 of the OFDM transmission. Note that since
subcarrier 0 is always excluded, it will actually be below the
allowed downstream spectrum band. This is the frequency of
subcarrier X(0) in the definition of the DFT."
::= { docsIf31CmDsOfdmChanEntry 3 }
docsIf31CmDsOfdmChanFirstActiveSubcarrierNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute corresponds to the number of the first
non-excluded subcarrier. The valid range is 148 to 7895"
::= { docsIf31CmDsOfdmChanEntry 4 }
docsIf31CmDsOfdmChanLastActiveSubcarrierNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute corresponds to the number of the last
non-excluded subcarrier. The valid range is 148 to 7895"
::= { docsIf31CmDsOfdmChanEntry 5 }
docsIf31CmDsOfdmChanNumActiveSubcarriers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the number of active data
subcarriers within the OFDM downstream channel (i.e. this
exclude subcarriers for continuous pilots and the PLC).
For 4K FFT mode, the maximum number of subcarriers including
continuous pilots and the PLC cannot exceed 3800, and for
8K FFT mode, the maximum number of active subcarriers including
continuous pilots and the PLC cannot be greater than 7600.
However, there are a minimum of 56 continuous pilots in a 192MHz
channel that has no exclusions, and the size of the PLC is
8 subcarriers for 4K FFT mode and 16 subcarriers for 8K FFT mode.
Therefore the maximum value of NumActiveSubcarriers is 3736
(or 3800 - 56 - 8) for 4K FFT mode and 7528 (or 7600 - 56 - 16)
for 8K FFT mode."
::= { docsIf31CmDsOfdmChanEntry 6 }
docsIf31CmDsOfdmChanSubcarrierSpacing OBJECT-TYPE
SYNTAX SubcarrierSpacingType
UNITS "kHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the subcarrier spacing associated with
a particular FFT mode configured on the OFDM downstream
channel. If it is 4K mode, then the subcarrier spacing is
50kHz. If it is 8K mode, then the subcarrier spacing is
25kHz."
::= { docsIf31CmDsOfdmChanEntry 7 }
docsIf31CmDsOfdmChanCyclicPrefix OBJECT-TYPE
SYNTAX DsOfdmCyclicPrefix
UNITS "number of samples"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cyclic prefix enables the receiver to overcome the effects of
inter-symbol-interference and intercarrier-interference caused
by micro-reflections in the channel. There are five possible
values for the length of the CP and the choice depends on the
delay spread of the channel - a longer delay spread requires a
longer cyclic prefix. The cyclic prefix (in usec) are converted
into samples using the sample rate of 204.8 Msamples/s and is
an integer multiple of: 1/64 * 20 us."
::= { docsIf31CmDsOfdmChanEntry 8 }
docsIf31CmDsOfdmChanRollOffPeriod OBJECT-TYPE
SYNTAX DsOfdmRollOffPeriod
UNITS "number of samples"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Roll off period maximizes channel capacity by sharpening the
edges of the spectrum of the OFDM signal. For windowing
purposes another segment at the start of the IDFT output is
appended to the end of the IDFT output - the roll-off postfix
(RP). There are five possible values for the (RP), and the
choice depends on the bandwidth of the channel and the number
of exclusion bands within the channel. A larger RP provides
sharper edges in the spectrum of the OFDM signal; however,
there is a time vs. frequency trade-off. Larger RP values
reduce the efficiency of transmission in the time domain,
but because the spectral edges are sharper, more useful
subcarriers appear in the frequency domain. There is an
optimum value for the RP that maximizes capacity for a given
bandwidth and/or exclusion band scenario."
::= { docsIf31CmDsOfdmChanEntry 9 }
docsIf31CmDsOfdmChanPlcFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the PHY Link Channel (PLC) frequency. It is the center
frequency of the lowest frequency subcarrier of the PLC. The
aim of the PLC is for the CMTS to convey to the CM the
physical properties of the OFDM channel."
::= { docsIf31CmDsOfdmChanEntry 10 }
docsIf31CmDsOfdmChanNumPilots OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the number of continuous pilots configured
for the OFDM downstream channel as received in the OCD message."
::= { docsIf31CmDsOfdmChanEntry 11 }
docsIf31CmDsOfdmChanTimeInterleaverDepth OBJECT-TYPE
SYNTAX TimeInterleaverDepth
UNITS "symbols"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interleaving used for this downstream channel as
received in the OCD message."
::= { docsIf31CmDsOfdmChanEntry 12 }
docsIf31CmDsOfdmChanPlcTotalCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the total number of PLC codewords
received by the CM."
::= { docsIf31CmDsOfdmChanEntry 13 }
docsIf31CmDsOfdmChanPlcUnreliableCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the total number of PLC codewords
which failed post-decoding LDPC syndrome check."
::= { docsIf31CmDsOfdmChanEntry 14 }
docsIf31CmDsOfdmChanNcpTotalFields OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the total number of NCP fields
received by the CM."
::= { docsIf31CmDsOfdmChanEntry 15 }
docsIf31CmDsOfdmChanNcpFieldCrcFailures OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the total number of NCP fields
received by the CM which failed the CRC check."
::= { docsIf31CmDsOfdmChanEntry 16 }
docsIf31CmDsOfdmProfileStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmDsOfdmProfileStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CM object specifies the attributes of the Downstream
profile assigned to an OFDM downstream channel."
::= { docsIf31MibObjects 10 }
docsIf31CmDsOfdmProfileStatsEntry OBJECT-TYPE
SYNTAX DocsIf31CmDsOfdmProfileStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmDsOfdmProfileStatsTable.
An entry exists in this table for each DS Profile assigned to
this CM on channels with an ifType value of docsOfdmDownstream(277)."
INDEX {
ifIndex,
docsIf31CmDsOfdmProfileStatsProfileId
}
::= { docsIf31CmDsOfdmProfileStatsTable 1 }
DocsIf31CmDsOfdmProfileStatsEntry ::=
SEQUENCE {
docsIf31CmDsOfdmProfileStatsProfileId Unsigned32,
docsIf31CmDsOfdmProfileStatsConfigChangeCt Unsigned32,
docsIf31CmDsOfdmProfileStatsTotalCodewords Counter64,
docsIf31CmDsOfdmProfileStatsCorrectedCodewords Counter64,
docsIf31CmDsOfdmProfileStatsUncorrectableCodewords Counter64,
docsIf31CmDsOfdmProfileStatsInOctets Counter64,
docsIf31CmDsOfdmProfileStatsInUnicastOctets Counter64,
docsIf31CmDsOfdmProfileStatsInMulticastOctets Counter64,
docsIf31CmDsOfdmProfileStatsInFrames Counter64,
docsIf31CmDsOfdmProfileStatsInUnicastFrames Counter64,
docsIf31CmDsOfdmProfileStatsInMulticastFrames Counter64,
docsIf31CmDsOfdmProfileStatsInFrameCrcFailures Counter64,
docsIf31CmDsOfdmProfileStatsCtrDiscontinuityTime TimeStamp
}
docsIf31CmDsOfdmProfileStatsProfileId OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute is the unique identifier of the downstream
profile associated with the OFDM downstream channel. Profile ID
with a value of 255 corresponds to NCP profile."
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface Specification
CM-SP-MULPIv3.1-I03-140610, Downstream Profile Descriptor."
::= { docsIf31CmDsOfdmProfileStatsEntry 1 }
docsIf31CmDsOfdmProfileStatsConfigChangeCt OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the value of the Configuration Change
Count field in the Downstream Profile Descriptor (DPD) MAC
Management Message corresponding to this profile."
::= { docsIf31CmDsOfdmProfileStatsEntry 2 }
docsIf31CmDsOfdmProfileStatsTotalCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the total number of codewords
(including full-length and shortened) measured on this profile."
::= { docsIf31CmDsOfdmProfileStatsEntry 3 }
docsIf31CmDsOfdmProfileStatsCorrectedCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the number of codewords measured on this
profile that failed pre-decoding LDPC syndrome check and passed
BCH decoding."
::= { docsIf31CmDsOfdmProfileStatsEntry 4 }
docsIf31CmDsOfdmProfileStatsUncorrectableCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the number of codewords measured on this
profile that failed BCH decoding."
::= { docsIf31CmDsOfdmProfileStatsEntry 5 }
docsIf31CmDsOfdmProfileStatsInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of MAC-layer octets received
by the CM on this Profile. This value is the size of all
unicast, multicast or broadcast frames (including all MAC-
layer framing) delivered from the Phy to the MAC; this
includes user data, DOCSIS MAC Management Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmDsOfdmProfileStatsEntry 6 }
docsIf31CmDsOfdmProfileStatsInUnicastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of MAC-layer unicast octets received
by the CM on this profile. This value is the size of all unicast
frames (including all MAC-layer framing) delivered from the Phy
to the MAC; this includes user data, DOCSIS MAC Management
Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmDsOfdmProfileStatsEntry 7 }
docsIf31CmDsOfdmProfileStatsInMulticastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of MAC-layer multicast and broadcast
octets received by the CM on this profile. This value is the size
of all frames (including all MAC-layer framing) delivered from the
Phy to the MAC and addressed to a multicast MAC address;
this includes user data, DOCSIS MAC Management Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmDsOfdmProfileStatsEntry 8 }
docsIf31CmDsOfdmProfileStatsInFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of frames received by the CM
on this profile. This value is the count of all unicast,
multicast or broadcast frames delivered from the Phy to the MAC;
this includes user data, DOCSIS MAC Management Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmDsOfdmProfileStatsEntry 9 }
docsIf31CmDsOfdmProfileStatsInUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of frames received by the CM
on this profile. This value is the count of all unicast,
multicast or broadcast frames delivered from the Phy to the MAC;
this includes user data, DOCSIS MAC Management Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmDsOfdmProfileStatsEntry 10 }
docsIf31CmDsOfdmProfileStatsInMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of multicast frames received
by the CM on this profile. This value is the count of all
frames delivered from the Phy to the MAC and addressed to a
multicast MAC address; this includes user data, DOCSIS MAC
Management Messages, etc., but excludes frames sent to a
broadcast address.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmDsOfdmProfileStatsEntry 11 }
docsIf31CmDsOfdmProfileStatsInFrameCrcFailures OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the number of MAC frames measured on
this profile that failed the MAC frame CRC check."
::= { docsIf31CmDsOfdmProfileStatsEntry 12 }
docsIf31CmDsOfdmProfileStatsCtrDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the value of sysUpTime on the most recent
occasion at which any one or more of this entry's counters
suffered a discontinuity. If no such discontinuities have
occurred since the last re-initialization of the local
management subsystem, then this attribute contains a zero value."
::= { docsIf31CmDsOfdmProfileStatsEntry 13 }
docsIf31CmDsOfdmChannelPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmDsOfdmChannelPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CM object provides measurements of the channel power
in 6 MHz wide bands at the F connector input of the CM."
::= { docsIf31MibObjects 11 }
docsIf31CmDsOfdmChannelPowerEntry OBJECT-TYPE
SYNTAX DocsIf31CmDsOfdmChannelPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmDsOfdmChannelPowerTable."
INDEX {
ifIndex,
docsIf31CmDsOfdmChannelBandIndex
}
::= { docsIf31CmDsOfdmChannelPowerTable 1 }
DocsIf31CmDsOfdmChannelPowerEntry ::=
SEQUENCE {
docsIf31CmDsOfdmChannelBandIndex Unsigned32,
docsIf31CmDsOfdmChannelPowerCenterFrequency Unsigned32,
docsIf31CmDsOfdmChannelPowerRxPower TenthdBmV
}
docsIf31CmDsOfdmChannelBandIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute is a unique index used by the CM to identify
each of the 6 MHz bands of a given OFDM downstream channel
(from the lowest 6MHz band of the Occupied Bandwidth to the
highest 6MHz band of the Occupied Bandwidth). The CM assigns
indices in frequency order from the OFDM channel's lowest to
highest 6 MHz frequency band for each of the 6 MHz bands of
the channel, using an index of 1 to represent the lowest frequency
band of the Occupied Bandwidth. Thus, an index of 33 represents
the highest possible 6 MHz frequency band of the Occupied Bandwidth
of a DOCSIS 3.1 OFDM channel. The CM also provides the power of the
PLC channel and utilize a value of 0 to represent the PLC
channel in this table."
::= { docsIf31CmDsOfdmChannelPowerEntry 1 }
docsIf31CmDsOfdmChannelPowerCenterFrequency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute corresponds to the center frequency of the 6 MHz
band the CM measured the average channel power.
See Reference for specific details on this attribute."
REFERENCE
"DOCSIS 3.1 CM Operations Support System Interface
Specification CM-SP-CM OSSIv3.1-I03-15MMDD,
CenterFrequency"
::= { docsIf31CmDsOfdmChannelPowerEntry 2 }
docsIf31CmDsOfdmChannelPowerRxPower OBJECT-TYPE
SYNTAX TenthdBmV
UNITS "TenthdBmV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute provides an estimate of the average power measured
at the F connector input of the CM in the receive downstream channel
set for this 6 MHz band.
If the band index is 0, then this attribute provides an
estimate of the average power measured at the F connector input
of the CM for a 6 MHz encompassed spectrum containing the
DOCSIS 3.1 PLC at its center."
::= { docsIf31CmDsOfdmChannelPowerEntry 3 }
docsIf31CmStatusOfdmaUsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmStatusOfdmaUsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines PHY and MAC information about
the CM's upstream channels operating in OFDMA mode.
This object provides per-CM Upstream channel information
previously available in the table docsIf3CmStatusTable."
::= { docsIf31MibObjects 12 }
docsIf31CmStatusOfdmaUsEntry OBJECT-TYPE
SYNTAX DocsIf31CmStatusOfdmaUsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmStatusOfdmaUsTable.
An instance exist for each of the CM's OFDMA upstream channels
which are configured for data transmission."
INDEX {
ifIndex
}
::= { docsIf31CmStatusOfdmaUsTable 1 }
DocsIf31CmStatusOfdmaUsEntry ::= SEQUENCE {
docsIf31CmStatusOfdmaUsT3Timeouts Counter32,
docsIf31CmStatusOfdmaUsT4Timeouts Counter32,
docsIf31CmStatusOfdmaUsRangingAborteds Counter32,
docsIf31CmStatusOfdmaUsT3Exceededs Counter32,
docsIf31CmStatusOfdmaUsIsMuted TruthValue,
docsIf31CmStatusOfdmaUsRangingStatus RangingState
}
docsIf31CmStatusOfdmaUsT3Timeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "timeouts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute denotes the number of times counter
T3 expired in the CM for this upstream channel. Discontinuities
in the value of this counter can occur at
re-initialization of the managed system, and at other
times as indicated by the value of ifCounterDiscontinuityTime
for the associated upstream channel."
REFERENCE
"RFC 2863."
::= { docsIf31CmStatusOfdmaUsEntry 2 }
docsIf31CmStatusOfdmaUsT4Timeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "timeouts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute denotes the number of times counter
T4 expired in the CM for this upstream channel. Discontinuities
in the value of this counter can occur at
re-initialization of the managed system, and at other
times as indicated by the value of ifCounterDiscontinuityTime
for the associated upstream channel."
REFERENCE
"RFC 2863."
::= { docsIf31CmStatusOfdmaUsEntry 3 }
docsIf31CmStatusOfdmaUsRangingAborteds OBJECT-TYPE
SYNTAX Counter32
UNITS "attempts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute denotes the number of times the ranging
process was aborted by the CMTS. Discontinuities
in the value of this counter can occur at re-initialization
of the managed system, and at other times as
indicated by the value of ifCounterDiscontinuityTime
([RFC2863]) for the associated upstream channel."
REFERENCE
"RFC 2863."
::= { docsIf31CmStatusOfdmaUsEntry 4 }
docsIf31CmStatusOfdmaUsT3Exceededs OBJECT-TYPE
SYNTAX Counter32
UNITS "timeouts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute denotes the number of times for excessive
T3 timeouts. Discontinuities in the value of
this counter can occur at re-initialization of the managed
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime for the associated
upstream channel."
REFERENCE
"RFC 2863."
::= { docsIf31CmStatusOfdmaUsEntry 5 }
docsIf31CmStatusOfdmaUsIsMuted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute denotes whether the upstream
channel is muted."
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.1-I03-140610 CM Control
Request section."
::= { docsIf31CmStatusOfdmaUsEntry 6 }
docsIf31CmStatusOfdmaUsRangingStatus OBJECT-TYPE
SYNTAX RangingState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute denotes the ranging state of the CM."
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.1-I03-140610 Ranging section."
::= { docsIf31CmStatusOfdmaUsEntry 7 }
docsIf31CmUsOfdmaChanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmUsOfdmaChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the CM upstream OFDMA channel."
::= { docsIf31MibObjects 13 }
docsIf31CmUsOfdmaChanEntry OBJECT-TYPE
SYNTAX DocsIf31CmUsOfdmaChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmUsOfdmaChanTable.
An instance exist for the CM OFDMA upstream interface."
INDEX {
ifIndex
}
::= { docsIf31CmUsOfdmaChanTable 1 }
DocsIf31CmUsOfdmaChanEntry ::=
SEQUENCE {
docsIf31CmUsOfdmaChanConfigChangeCt Unsigned32,
docsIf31CmUsOfdmaChanSubcarrierZeroFreq Unsigned32,
docsIf31CmUsOfdmaChanFirstActiveSubcarrierNum Unsigned32,
docsIf31CmUsOfdmaChanLastActiveSubcarrierNum Unsigned32,
docsIf31CmUsOfdmaChanNumActiveSubcarriers Unsigned32,
docsIf31CmUsOfdmaChanSubcarrierSpacing SubcarrierSpacingType,
docsIf31CmUsOfdmaChanCyclicPrefix UsOfdmaCyclicPrefix,
docsIf31CmUsOfdmaChanRollOffPeriod UsOfdmaRollOffPeriod,
docsIf31CmUsOfdmaChanNumSymbolsPerFrame Unsigned32,
docsIf31CmUsOfdmaChanTxPower TenthdBmV,
docsIf31CmUsOfdmaChanPreEqEnabled TruthValue
}
docsIf31CmUsOfdmaChanConfigChangeCt OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the value of the Configuration Change
Count field in the Upstream Channel Descriptor (UCD) MAC
Management Message corresponding to this OFDMA channel."
::= { docsIf31CmUsOfdmaChanEntry 1 }
docsIf31CmUsOfdmaChanSubcarrierZeroFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the lower edge frequency of the OFDMA
upstream channel"
::= { docsIf31CmUsOfdmaChanEntry 2 }
docsIf31CmUsOfdmaChanFirstActiveSubcarrierNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the upper edge of the OFDMA upstream
channel. The minimum channel width for an OFDMA upstream
channel is 6.4 MHz in 4K mode and 10MHz in 2K mode. The valid
range is 74 to 3947."
::= { docsIf31CmUsOfdmaChanEntry 3 }
docsIf31CmUsOfdmaChanLastActiveSubcarrierNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the last active subcarrier number.
The valid range is 74 to 3947."
::= { docsIf31CmUsOfdmaChanEntry 4 }
docsIf31CmUsOfdmaChanNumActiveSubcarriers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the number of active subcarriers within
the OFDMA upstream channel. The valid range is 1 to 3800."
::= { docsIf31CmUsOfdmaChanEntry 5 }
docsIf31CmUsOfdmaChanSubcarrierSpacing OBJECT-TYPE
SYNTAX SubcarrierSpacingType
UNITS "kHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the subcarrier spacing associated with
a particular FFT mode configured on the OFDMA upstream
channel. If it is 2K mode, then the subcarrier spacing is 50kHz.
If it is 4K mode, then the subcarrier spacing is 25kHz."
::= { docsIf31CmUsOfdmaChanEntry 6 }
docsIf31CmUsOfdmaChanCyclicPrefix OBJECT-TYPE
SYNTAX UsOfdmaCyclicPrefix
UNITS "number of samples"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cyclic prefix is added in order to enable the receiver to
overcome the effects of inter-symbol interference (ISI) and
inter-carrier interference caused by microreflections in the
channel. The cyclic prefix (in usec) is converted into samples
using the sample rate of 102.4 Msamples/s. There are eleven
values for the length of the CP and the choice depends on the
delay spread of the channel; a longer delay spread requires a
longer cyclic prefix."
::= { docsIf31CmUsOfdmaChanEntry 7 }
docsIf31CmUsOfdmaChanRollOffPeriod OBJECT-TYPE
SYNTAX UsOfdmaRollOffPeriod
UNITS "number of samples"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Windowing is applied in order to maximize channel capacity
by sharpening the edges of the spectrum of the OFDMA signal.
Windowing is applied in the time domain by tapering (or
rolling off) the edges using a raised cosine function. There
are eight possible values of roll-off prefix. The Roll-Off
Period is given in us and in number of samples using the
sample rate of 102.4 Msamples/s. The configuration where
Roll-off prefix value is greater than or equal to cyclic
prefix value is considered invalid."
::= { docsIf31CmUsOfdmaChanEntry 8 }
docsIf31CmUsOfdmaChanNumSymbolsPerFrame OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the number of symbol periods per frame.
For channel bandwidth greater than 72MHz, the maximum number
of symbol periods per frame is 18 for 2K mode and 9 for 4K
mode. For channel bandwidth less than 72 MHz but greater than
48MHz, the maximum number of symbols per frame is 24 for 2K
mode and 12 for 4K mode. For channel bandwidth less than
48MHz, the maximum number of symbol periods is 36 for 2K mode
and 18 for 4K mode. The minimum number of symbol periods per
frame is 6 for both the FFT modes and is independent of the
channel bandwidth."
::= { docsIf31CmUsOfdmaChanEntry 9 }
docsIf31CmUsOfdmaChanTxPower OBJECT-TYPE
SYNTAX TenthdBmV
UNITS "dBmV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the operational transmit power for
the associated OFDMA upstream channel."
::= { docsIf31CmUsOfdmaChanEntry 10 }
docsIf31CmUsOfdmaChanPreEqEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines whether pre-equalization is enabled on
the associated OFDMA upstream channel."
::= { docsIf31CmUsOfdmaChanEntry 11 }
docsIf31CmUsOfdmaProfileStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmUsOfdmaProfileStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CM object specifies the attributes of the Upstream
profile assigned to an OFDM upstream channel."
::= { docsIf31MibObjects 14 }
docsIf31CmUsOfdmaProfileStatsEntry OBJECT-TYPE
SYNTAX DocsIf31CmUsOfdmaProfileStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmUsOfdmaProfileStatsTable.
An instance exist for each profile associated with the OFDMA
upstream interface."
INDEX {
ifIndex,
docsIf31CmUsOfdmaProfileStatsIuc
}
::= { docsIf31CmUsOfdmaProfileStatsTable 1 }
DocsIf31CmUsOfdmaProfileStatsEntry ::=
SEQUENCE {
docsIf31CmUsOfdmaProfileStatsIuc Unsigned32,
docsIf31CmUsOfdmaProfileStatsOutOctets Counter64,
docsIf31CmUsOfdmaProfileStatsCtrDiscontinuityTime TimeStamp
}
docsIf31CmUsOfdmaProfileStatsIuc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute is the unique identifier of the upstream
profile/IUC associated with the OFDMA upstream channel. It
is a key defined to provide an index into the table. In
DOCSIS 3.1 the valid Data Profile IUCs are: 5, 6, 9, 10,
11, 12 and 13."
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.1-I03-140610,
Required Burst Attributes on OFDMA Channels."
::= { docsIf31CmUsOfdmaProfileStatsEntry 1 }
docsIf31CmUsOfdmaProfileStatsOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of MAC-layer octets transmitted by
the CM using this Data IUC profile. This value is the size of
all unicast, multicast or broadcast frames (including all MAC-
layer framing) delivered from the MAC to the Phy -- this includes
user data, DOCSIS MAC Management Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmUsOfdmaProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmUsOfdmaProfileStatsEntry 2 }
docsIf31CmUsOfdmaProfileStatsCtrDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the value of sysUpTime on the most recent
occasion at which any one or more of this entry's counters
suffered a discontinuity. If no such discontinuities have
occurred since the last re-initialization of the local
management subsystem, then this attribute contains a zero value."
::= { docsIf31CmUsOfdmaProfileStatsEntry 3 }
docsIf31CmUsOfdmaMinislotCfgStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmUsOfdmaMinislotCfgStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CM object specifies the attributes of the minislot
configuration associated with a OFDMA upstream channel."
::= { docsIf31MibObjects 15 }
docsIf31CmUsOfdmaMinislotCfgStateEntry OBJECT-TYPE
SYNTAX DocsIf31CmUsOfdmaMinislotCfgStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmUsOfdmaMinislotCfgStateTable.
An instance exists for each OFDMA minislot."
INDEX {
ifIndex,
docsIf31CmUsOfdmaProfileStatsIuc,
docsIf31CmUsOfdmaMinislotCfgStateStartMinislotNum
}
::= { docsIf31CmUsOfdmaMinislotCfgStateTable 1 }
DocsIf31CmUsOfdmaMinislotCfgStateEntry ::=
SEQUENCE {
docsIf31CmUsOfdmaMinislotCfgStateStartMinislotNum Unsigned32,
docsIf31CmUsOfdmaMinislotCfgStateFirstSubcarrierId Unsigned32,
docsIf31CmUsOfdmaMinislotCfgStateNumConsecutiveMinislots Unsigned32,
docsIf31CmUsOfdmaMinislotCfgStateMinislotPilotPattern Unsigned32,
docsIf31CmUsOfdmaMinislotCfgStateDataSymbolModulation
UsOfdmaModulationType
}
docsIf31CmUsOfdmaMinislotCfgStateStartMinislotNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute is the unique identifier of the starting
minislot in the group of consecutive minislots. The
valid range is 1 to 240."
::= { docsIf31CmUsOfdmaMinislotCfgStateEntry 1 }
docsIf31CmUsOfdmaMinislotCfgStateFirstSubcarrierId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is subcarrier identifier of the first
subcarrier in the minislot. The valid range is 0 to 4095."
::= { docsIf31CmUsOfdmaMinislotCfgStateEntry 2 }
docsIf31CmUsOfdmaMinislotCfgStateNumConsecutiveMinislots OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the number of continuous minislots
which have the same bit loading, starting with the StartMinislotNum,
defined in the associated upstream profile. The valid range
is 1 to 237."
::= { docsIf31CmUsOfdmaMinislotCfgStateEntry 3 }
docsIf31CmUsOfdmaMinislotCfgStateMinislotPilotPattern OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the id of the pilot pattern used for
the minislot. The actual range varies depending on the FFT
size in use, either 1-8 for 2K or 1-14 for 4K mode. The valid
range is 1 to 14."
::= { docsIf31CmUsOfdmaMinislotCfgStateEntry 4 }
docsIf31CmUsOfdmaMinislotCfgStateDataSymbolModulation OBJECT-TYPE
SYNTAX UsOfdmaModulationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the bit loading of the data
subcarriers in the minislot."
::= { docsIf31CmUsOfdmaMinislotCfgStateEntry 5 }
docsIf31CmEmDlsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmEmDlsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CM object provides statistics on the DLS feature, when
enabled."
::= { docsIf31MibObjects 16 }
docsIf31CmEmDlsStatsEntry OBJECT-TYPE
SYNTAX DocsIf31CmEmDlsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmEmDlsStatsTable. An
instance exists for each of the Cable Modem's MAC Domains.
It is indexed by the ifIndex of the corresponding MAC Domain."
INDEX {
ifIndex
}
::= { docsIf31CmEmDlsStatsTable 1 }
DocsIf31CmEmDlsStatsEntry ::=
SEQUENCE {
docsIf31CmEmDlsStatsNumberTimesCrossedBelowUsEntryThrshlds Unsigned32,
docsIf31CmEmDlsStatsNumberTimesCrossedBelowDsEntryThrshlds Unsigned32,
docsIf31CmEmDlsStatsTotalDuration Unsigned32,
docsIf31CmEmDlsStatsTotalDurationBelowUsThrshlds Unsigned32,
docsIf31CmEmDlsStatsTotalDurationBelowDsThrshlds Unsigned32,
docsIf31CmEmDlsStatsTotalDurationBelowUsDsThrshlds Unsigned32,
docsIf31CmEmDlsStatsNumSleepLatencyTriggers Counter32,
docsIf31CmEmDlsStatsNumSleepByteCtTriggers Counter32
}
docsIf31CmEmDlsStatsNumberTimesCrossedBelowUsEntryThrshlds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the number of times since
registration the CM crossed below the upstream entry bitrate
threshold for a number of consecutive seconds equal to or
exceeding the upstream entry time threshold."
::= { docsIf31CmEmDlsStatsEntry 1 }
docsIf31CmEmDlsStatsNumberTimesCrossedBelowDsEntryThrshlds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the number of times since
registration the CM crossed below the downstream entry
bitrate threshold for a number of consecutive seconds equal
to or exceeding the downstream entry time threshold."
::= { docsIf31CmEmDlsStatsEntry 2 }
docsIf31CmEmDlsStatsTotalDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the total time duration, in seconds
since registration, the CM has been in Energy Management DLS
mode, as controlled by the DBC-REQ Energy Management DLS Mode
Indicator TLV. This attribute differs from
docsIf31CmEmDlsStatsTotalDurationBelowUsDsThrshlds because it
is dependent on effects of the Energy Management Cycle
Period, and processing of EM-REQ/EM-RSP messages and DBC
messages that specifically indicate entry into or exit from
Energy Management DLS mode."
::= { docsIf31CmEmDlsStatsEntry 3 }
docsIf31CmEmDlsStatsTotalDurationBelowUsThrshlds OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the total time duration, in seconds
since registration, the CM satisfied upstream conditions for
entry into or remaining in Energy Management DLS mode."
::= { docsIf31CmEmDlsStatsEntry 4 }
docsIf31CmEmDlsStatsTotalDurationBelowDsThrshlds OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the total time duration, in seconds
since registration, the CM satisfied downstream conditions for
entry into or remaining in Energy Management DLS mode."
::= { docsIf31CmEmDlsStatsEntry 5 }
docsIf31CmEmDlsStatsTotalDurationBelowUsDsThrshlds OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the total time duration, in seconds
since registration, the CM, with respect to both upstream and
downstream entry and exit thresholds, satisfied conditions for
entry into and remaining in Energy Management DLS mode. This
attribute differs from docsIf31CmEmDlsStatsTotalDuration
because it is not dependent on effects of the Energy
Management Cycle Period or processing of EM-REQ/EM-RSP
messages and DBC messages that specifically indicate entry
into or exit from Energy Management DLS mode."
::= { docsIf31CmEmDlsStatsEntry 6 }
docsIf31CmEmDlsStatsNumSleepLatencyTriggers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the number of times since
registration the CM transitioned to the DLS wake state
due to the DLS Maximum Sleep Latency being exceeded."
::= { docsIf31CmEmDlsStatsEntry 7 }
docsIf31CmEmDlsStatsNumSleepByteCtTriggers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the number of times since
registration the CM transitioned to the DLS wake state
due to the DLS Maximum Byte Count being exceeded."
::= { docsIf31CmEmDlsStatsEntry 8 }
docsIf31CmEmDlsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmEmDlsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CM object provides statistics on the DLS feature, when
enabled."
::= { docsIf31MibObjects 17 }
docsIf31CmEmDlsStatusEntry OBJECT-TYPE
SYNTAX DocsIf31CmEmDlsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmEmDlsStatusTable. An
instance exists for each of the Cable Modem's MAC Domains.
It is indexed by the ifIndex of the corresponding MAC Domain."
INDEX {
ifIndex
}
::= { docsIf31CmEmDlsStatusTable 1 }
DocsIf31CmEmDlsStatusEntry ::=
SEQUENCE {
docsIf31CmEmDlsStatusAssignedEmIds EmIdList,
docsIf31CmEmDlsStatusReceiveTimer Unsigned32,
docsIf31CmEmDlsStatusMaxSleepLatency Unsigned32,
docsIf31CmEmDlsStatusMaxSleepBytes Unsigned32
}
docsIf31CmEmDlsStatusAssignedEmIds OBJECT-TYPE
SYNTAX EmIdList
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute reports the set of CMTS-assigned EM-IDs for this CM.
This attribute is encoded as an array 16-bit binary values with up
to 3 elements. The broadcast EM-ID is not included in the list"
::= { docsIf31CmEmDlsStatusEntry 1 }
docsIf31CmEmDlsStatusReceiveTimer OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies how long the CM is required to
continue listening on the downstream for traffic, after
reception of the EMM with Sleep Time with a non-zero value.
The CMTS communicates the EM Receive Timer to the CM during
registration or in DBC message. The DLS Receive Timer is
specified in units of PLC frame intervals. The valid range
is 0 - 2."
::= { docsIf31CmEmDlsStatusEntry 2 }
docsIf31CmEmDlsStatusMaxSleepLatency OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the amount of time the CM would allow
an upstream channel to queue the packets without transitioning
to DLS wake state. The Max Sleep Latency is specified in msec."
::= { docsIf31CmEmDlsStatusEntry 3 }
docsIf31CmEmDlsStatusMaxSleepBytes OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum number of bytes a CM would
allow an upstream service flow to enqueue without transitioning
to DLS wake state. The MaxSleepBytes is specified in bytes."
::= { docsIf31CmEmDlsStatusEntry 4 }
docsIf31CmSystemCfgState OBJECT IDENTIFIER ::= { docsIf31MibObjects 18 }
docsIf31CmSystemCfgStateDiplexerCapability OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum diplexer upper band edge
supported by the CM device. This corresponds to the maxmimum
capability of the CM device itself independent of its current
configuration."
REFERENCE
"DOCSIS 3.1 Physical layer Specification CM-SP-PHYv3.1-I03-140610,
Upstream CM Spectrum section."
::= { docsIf31CmSystemCfgState 1 }
docsIf31CmSystemCfgStateDiplexerCfgBandEdge OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the current configured value for the
upper band edge of the diplexer in the CM device. This corresponds
to the Diplexer Upper Band Edge Support reported by the CM in its
REG-REQ."
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.1-I03-140610,
Diplexer Upper Band Edge Support section."
::= { docsIf31CmSystemCfgState 2 }
docsIf31CmtsDsOfdmChanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsDsOfdmChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CMTS object reports the status of the downstream OFDM channels."
::= { docsIf31MibObjects 19 }
docsIf31CmtsDsOfdmChanEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsDsOfdmChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsDsOfdmTable.
An instance exists for each downstream OFDM channel."
INDEX {
ifIndex
}
::= { docsIf31CmtsDsOfdmChanTable 1 }
DocsIf31CmtsDsOfdmChanEntry ::=
SEQUENCE {
docsIf31CmtsDsOfdmChanChannelId Integer32,
docsIf31CmtsDsOfdmChanLowerBdryFreq Unsigned32,
docsIf31CmtsDsOfdmChanUpperBdryFreq Unsigned32,
docsIf31CmtsDsOfdmChanLowerBdryEncompSpectrum Unsigned32,
docsIf31CmtsDsOfdmChanUpperBdryEncompSpectrum Unsigned32,
docsIf31CmtsDsOfdmChanPlcFreq Unsigned32,
docsIf31CmtsDsOfdmChanSubcarrierZeroFreq Unsigned32,
docsIf31CmtsDsOfdmChanFirstActiveSubcarrierNum Unsigned32,
docsIf31CmtsDsOfdmChanLastActiveSubcarrierNum Unsigned32,
docsIf31CmtsDsOfdmChanNumActiveSubcarriers Unsigned32,
docsIf31CmtsDsOfdmChanSubcarrierSpacing SubcarrierSpacingType,
docsIf31CmtsDsOfdmChanLowerGuardbandWidth Unsigned32,
docsIf31CmtsDsOfdmChanUpperGuardbandWidth Unsigned32,
docsIf31CmtsDsOfdmChanCyclicPrefix DsOfdmCyclicPrefix,
docsIf31CmtsDsOfdmChanRollOffPeriod DsOfdmRollOffPeriod,
docsIf31CmtsDsOfdmChanTimeInterleaverDepth TimeInterleaverDepth,
docsIf31CmtsDsOfdmChanNumPilots Unsigned32,
docsIf31CmtsDsOfdmChanPilotScaleFactor Unsigned32,
docsIf31CmtsDsOfdmChanNcpModulation DsOfdmModulationType,
docsIf31CmtsDsOfdmChanUtilization Unsigned32
}
docsIf31CmtsDsOfdmChanChannelId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cable Modem Termination System identification of the
OFDM downstream channel within this particular MAC interface.
if the interface is down, the object returns the most
current value. If the downstream channel ID is unknown,
this object returns a value of 0."
::= { docsIf31CmtsDsOfdmChanEntry 1 }
docsIf31CmtsDsOfdmChanLowerBdryFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents either the lower boundary frequency
of the lower guardband or (if no guardband is defined) the
lower boundary frequency of the lowest active subcarrier of the
OFDM downstream channel."
::= { docsIf31CmtsDsOfdmChanEntry 2 }
docsIf31CmtsDsOfdmChanUpperBdryFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents either the upper boundary frequency
of the upper guardband or (if no guardband is defined) the
upper boundary frequency of the highest active subcarrier of the
OFDM downstream channel."
::= { docsIf31CmtsDsOfdmChanEntry 3 }
docsIf31CmtsDsOfdmChanLowerBdryEncompSpectrum OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the lower boundary frequency
of the encompassed spectrum."
::= { docsIf31CmtsDsOfdmChanEntry 4 }
docsIf31CmtsDsOfdmChanUpperBdryEncompSpectrum OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the upper boundary frequency
of the encompassed spectrum."
::= { docsIf31CmtsDsOfdmChanEntry 5 }
docsIf31CmtsDsOfdmChanPlcFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the PHY Link Channel (PLC) frequency. It is the center
frequency of the lowest frequency subcarrier of the PLC. The
aim of the PLC is for the CMTS to convey to the CM the
physical properties of the OFDM channel."
::= { docsIf31CmtsDsOfdmChanEntry 6 }
docsIf31CmtsDsOfdmChanSubcarrierZeroFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the center frequency of the
subcarrier 0 of the OFDM transmission. Note that since
subcarrier 0 is always excluded, it will actually be below the
allowed downstream spectrum band. This is the frequency of
subcarrier X(0) in the definition of the DFT."
::= { docsIf31CmtsDsOfdmChanEntry 7 }
docsIf31CmtsDsOfdmChanFirstActiveSubcarrierNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute corresponds to the number of the first
non-excluded subcarrier. The valid range is 148 to 7895."
::= { docsIf31CmtsDsOfdmChanEntry 8 }
docsIf31CmtsDsOfdmChanLastActiveSubcarrierNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute corresponds to the number of the last
non-excluded subcarrier. The valid range is 148 to 7895"
::= { docsIf31CmtsDsOfdmChanEntry 9 }
docsIf31CmtsDsOfdmChanNumActiveSubcarriers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the number of active data
subcarriers within the OFDM downstream channel (i.e. this
exclude subcarriers for continuous pilots and the PLC).
For 4K FFT mode, the maximum number of subcarriers including
continuous pilots and the PLC cannot exceed 3800, and for
8K FFT mode, the maximum number of active subcarriers including
continuous pilots and the PLC cannot be greater than 7600.
However, there are a minimum of 56 continuous pilots in a 192MHz
channel that has no exclusions, and the size of the PLC is
8 subcarriers for 4K FFT mode and 16 subcarriers for 8K FFT mode.
Therefore the maximum value of NumActiveSubcarriers is 3736
(or 3800 - 56 - 8) for 4K FFT mode and 7528 (or 7600 - 56 - 16)
for 8K FFT mode."
::= { docsIf31CmtsDsOfdmChanEntry 10 }
docsIf31CmtsDsOfdmChanSubcarrierSpacing OBJECT-TYPE
SYNTAX SubcarrierSpacingType
UNITS "kHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the subcarrier spacing associated with
a particular FFT mode configured on the OFDM downstream
channel. If it is 4K mode, then the subcarrier spacing is
50kHz. If it is 8K mode, then the subcarrier spacing is
25kHz."
::= { docsIf31CmtsDsOfdmChanEntry 11 }
docsIf31CmtsDsOfdmChanLowerGuardbandWidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the width in Hertz of the lower guard
band of the OFDM channel. The valid range is 0 or
1MHz to 1.77GHz."
::= { docsIf31CmtsDsOfdmChanEntry 12 }
docsIf31CmtsDsOfdmChanUpperGuardbandWidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the width in Hertz of the upper guard
band of the OFDM channel. The valid range is 0 or
1MHz to 1.77GHz"
::= { docsIf31CmtsDsOfdmChanEntry 13 }
docsIf31CmtsDsOfdmChanCyclicPrefix OBJECT-TYPE
SYNTAX DsOfdmCyclicPrefix
UNITS "number of samples"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cyclic prefix enables the receiver to overcome the effects of
inter-symbol-interference and intercarrier-interference caused
by micro-reflections in the channel. There are five possible
values for the length of the CP and the choice depends on the
delay spread of the channel - a longer delay spread requires a
longer cyclic prefix. The cyclic prefix (in usec) are converted
into samples using the sample rate of 204.8 Msamples/s and is
an integer multiple of: 1/64 * 20 us."
::= { docsIf31CmtsDsOfdmChanEntry 14 }
docsIf31CmtsDsOfdmChanRollOffPeriod OBJECT-TYPE
SYNTAX DsOfdmRollOffPeriod
UNITS "number of samples"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Roll off period maximizes channel capacity by sharpening the
edges of the spectrum of the OFDM signal. For windowing
purposes another segment at the start of the IDFT output is
appended to the end of the IDFT output - the roll-off postfix
(RP). There are five possible values for the (RP), and the
choice depends on the bandwidth of the channel and the number
of exclusion bands within the channel. A larger RP provides
sharper edges in the spectrum of the OFDM signal; however,
there is a time vs. frequency trade-off. Larger RP values
reduce the efficiency of transmission in the time domain,
but because the spectral edges are sharper, more useful
subcarriers appear in the frequency domain. There is an
optimum value for the RP that maximizes capacity for a given
bandwidth and/or exclusion band scenario."
::= { docsIf31CmtsDsOfdmChanEntry 15 }
docsIf31CmtsDsOfdmChanTimeInterleaverDepth OBJECT-TYPE
SYNTAX TimeInterleaverDepth
UNITS "symbols"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the number of samples for the
OFDM Downstream channel. This is limited to 16 samples for
and 32 samples for 50 kHz and 25 kHz Subcarrier Spacing,
respectively."
::= { docsIf31CmtsDsOfdmChanEntry 16 }
docsIf31CmtsDsOfdmChanNumPilots OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the number of continuous pilots
for the OFDM downstream channel."
::= { docsIf31CmtsDsOfdmChanEntry 17 }
docsIf31CmtsDsOfdmChanPilotScaleFactor OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the scale factor for calculating
the number of continuous pilots. "
::= { docsIf31CmtsDsOfdmChanEntry 18 }
docsIf31CmtsDsOfdmChanNcpModulation OBJECT-TYPE
SYNTAX DsOfdmModulationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the modulation of all subcarriers in
the NCP channel. Valid values are qpsk, qam16 and qam64."
::= { docsIf31CmtsDsOfdmChanEntry 19 }
docsIf31CmtsDsOfdmChanUtilization OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization for this OFDM downstream channel, accurate as
of the most recent docsIfCmtsChannelUtilizationInterval.
See Reference for specific details on this attribute."
REFERENCE
"DOCSIS 3.1 CCAP Operations Support System Interface
Specification CM-SP-CCAP OSSIv3.1-I04-15MMDD,
OfdmChannelUtilization."
::= { docsIf31CmtsDsOfdmChanEntry 20 }
docsIf31CmtsDsOfdmProfileStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsDsOfdmProfileStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CMTS table provides DS OFDM statistics on a per Profile basis."
::= { docsIf31MibObjects 20 }
docsIf31CmtsDsOfdmProfileStatsEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsDsOfdmProfileStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsDsOfdmProfileStatsTable.
An instance exists for each Profile Id on a given DS OFDM channel."
INDEX {
ifIndex,
docsIf31CmtsDsOfdmProfileStatsProfileId
}
::= { docsIf31CmtsDsOfdmProfileStatsTable 1 }
DocsIf31CmtsDsOfdmProfileStatsEntry ::=
SEQUENCE {
docsIf31CmtsDsOfdmProfileStatsProfileId Unsigned32,
docsIf31CmtsDsOfdmProfileStatsConfigChangeCt Unsigned32,
docsIf31CmtsDsOfdmProfileStatsFullChannelSpeed CounterBasedGauge64,
docsIf31CmtsDsOfdmProfileStatsOutOctets Counter64,
docsIf31CmtsDsOfdmProfileStatsOutUnicastOctets Counter64,
docsIf31CmtsDsOfdmProfileStatsOutMulticastOctets Counter64,
docsIf31CmtsDsOfdmProfileStatsOutFrames Counter64,
docsIf31CmtsDsOfdmProfileStatsOutUnicastFrames Counter64,
docsIf31CmtsDsOfdmProfileStatsOutMulticastFrames Counter64,
docsIf31CmtsDsOfdmProfileStatsCtrDiscontinuityTime TimeStamp
}
docsIf31CmtsDsOfdmProfileStatsProfileId OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute is the unique identifier of the downstream
profile associated with the OFDM downstream channel. Profile ID
with a value of 255 corresponds to NCP profile."
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface Specification
CM-SP-MULPIv3.1-I03-140610, Downstream Profile Descriptor."
::= { docsIf31CmtsDsOfdmProfileStatsEntry 1 }
docsIf31CmtsDsOfdmProfileStatsConfigChangeCt OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the value of the Configuration Change
Count field in the Downstream Profile Descriptor (DPD) MAC
Management Message corresponding to this profile."
::= { docsIf31CmtsDsOfdmProfileStatsEntry 2 }
docsIf31CmtsDsOfdmProfileStatsFullChannelSpeed OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the speed of the associated channel in bps
if this were the only profile and 100% of data-capable subcarriers
were utilized to transmit MAC frames in full codewords.
See Reference for specific details on this attribute."
REFERENCE
"DOCSIS 3.1 CCAP Operations Support System Interface
Specification CM-SP-CCAP OSSIv3.1-I03-15MMDD,
ProfileFullChannelSpeed."
::= { docsIf31CmtsDsOfdmProfileStatsEntry 3 }
docsIf31CmtsDsOfdmProfileStatsOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of MAC-layer octets transmitted
by the CCAP using this profile. This value is the size of all
unicast, multicast or broadcast frames (including all MAC-layer
framing) delivered from the MAC to the Phy -- this includes user
data, DOCSIS MAC Management Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmtsDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmtsDsOfdmProfileStatsEntry 4 }
docsIf31CmtsDsOfdmProfileStatsOutUnicastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of MAC-layer Unicast octets transmitted
by the CCAP using this profile. This value is the size of all unicast
frames (including all MAC-layer framing) delivered from the
MAC to the Phy -- this includes user data, DOCSIS MAC Management
Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmtsDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmtsDsOfdmProfileStatsEntry 5 }
docsIf31CmtsDsOfdmProfileStatsOutMulticastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of MAC-layer Multicast and broadcast
octets transmitted by the CCAP using this profile. This value is
the size of all frames (including all MAC-layer framing) delivered
from the MAC to the Phy and addressed to a multicast MAC address
-- this includes user data, DOCSIS MAC Management Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmtsDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmtsDsOfdmProfileStatsEntry 6 }
docsIf31CmtsDsOfdmProfileStatsOutFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of frames transmitted by the CCAP
using this profile. This value is the count of all unicast,
multicast or broadcast frames delivered from the MAC to the Phy
-- this includes user data, DOCSIS MAC Management Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmtsDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmtsDsOfdmProfileStatsEntry 7 }
docsIf31CmtsDsOfdmProfileStatsOutUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of unicast frames transmitted by
the CCAP using this profile. This value is the count of all
frames delivered from the MAC to the Phy and addressed to a
unicast MAC address -- this include user data, DOCSIS MAC Management
Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmtsDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmtsDsOfdmProfileStatsEntry 8 }
docsIf31CmtsDsOfdmProfileStatsOutMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of multicast frames transmitted
by the CCAP using this profile. This value is the count of all
frames delivered from the MAC to the Phy and addressed to a
multicast MAC address -- this include user data, DOCSIS MAC
Management Messages, etc, but excludes frames sent to a broadcast
address.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmtsDsOfdmProfileStats-
CtrDiscontinuityTime."
::= { docsIf31CmtsDsOfdmProfileStatsEntry 9 }
docsIf31CmtsDsOfdmProfileStatsCtrDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the value of sysUpTime on the most recent
occasion at which any one or more of this entry's counters
suffered a discontinuity. If no such discontinuities have
occurred since the last re-initialization of the local
management subsystem, then this attribute contains a zero value."
::= { docsIf31CmtsDsOfdmProfileStatsEntry 10 }
docsIf31CmtsDsOfdmSubcarrierStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsDsOfdmSubcarrierStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CMTS object provides the status of each of the OFDM subcarriers
which comprise this OFDM channel."
::= { docsIf31MibObjects 21 }
docsIf31CmtsDsOfdmSubcarrierStatusEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsDsOfdmSubcarrierStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsDsOfdmSubcarrierStatusTable.
An instance exists for each Profile on a given OFDM downstream."
INDEX {
ifIndex,
docsIf31CmtsDsOfdmProfileStatsProfileId,
docsIf31CmtsDsOfdmSubcarrierStatusStartId
}
::= { docsIf31CmtsDsOfdmSubcarrierStatusTable 1 }
DocsIf31CmtsDsOfdmSubcarrierStatusEntry ::=
SEQUENCE {
docsIf31CmtsDsOfdmSubcarrierStatusStartId Unsigned32,
docsIf31CmtsDsOfdmSubcarrierStatusEndId Unsigned32,
docsIf31CmtsDsOfdmSubcarrierStatusModulation DsOfdmModulationType
}
docsIf31CmtsDsOfdmSubcarrierStatusStartId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute is an identifier for the first subcarrier
in the range of active subcarriers with the same modulation."
::= { docsIf31CmtsDsOfdmSubcarrierStatusEntry 1 }
docsIf31CmtsDsOfdmSubcarrierStatusEndId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the subcarrier number of the last subcarrier
in the group."
::= { docsIf31CmtsDsOfdmSubcarrierStatusEntry 2 }
docsIf31CmtsDsOfdmSubcarrierStatusModulation OBJECT-TYPE
SYNTAX DsOfdmModulationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the modulation of the subcarrier range."
::= { docsIf31CmtsDsOfdmSubcarrierStatusEntry 3 }
docsIf31CmtsDsOfdmChanPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsDsOfdmChanPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object provides measurements of the downstream OFDM channel
power in 6 MHz-wide bands at the output of the CCAP."
::= { docsIf31MibObjects 22 }
docsIf31CmtsDsOfdmChanPowerEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsDsOfdmChanPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of the docsIf31CmtsDsOfdmChanPowerTable."
INDEX {
ifIndex,
docsIf31CmtsDsOfdmChanPowerBandIndex
}
::= { docsIf31CmtsDsOfdmChanPowerTable 1 }
DocsIf31CmtsDsOfdmChanPowerEntry ::= SEQUENCE {
docsIf31CmtsDsOfdmChanPowerBandIndex Unsigned32,
docsIf31CmtsDsOfdmChanPowerCenterFrequency Unsigned32,
docsIf31CmtsDsOfdmChanPowerTxPower TenthdBmV
}
docsIf31CmtsDsOfdmChanPowerBandIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute is a unique index used by the CCAP to
identify each of the 6 MHz bands of a given OFDM downstream
channel (from the lowest 6MHz band of the Occupied Bandwidth
to the highest 6MHz band of the Occupied Bandwidth). The CCAP
assigns indices in frequency order from the OFDM channel's
lowest to highest 6 MHz frequency band for each of the 6 MHz
bands of the channel, using an index of 1 to represent the lowest
frequency band of the Occupied Bandwidth. Thus, an index of 33
represents the highest possible 6 MHz frequency band of the
Occupied Bandwidth of an OFDM channel.
The CCAP also provides the power of the PLC channel and utilizes
a value of 0 to represent the PLC channel in this table. "
::= { docsIf31CmtsDsOfdmChanPowerEntry 1 }
docsIf31CmtsDsOfdmChanPowerCenterFrequency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute corresponds to the center frequency of the 6 MHz
band the CM measured the average channel power.
See Reference for specific details on this attribute."
REFERENCE
"DOCSIS 3.1 CCAP Operations Support System Interface
Specification CM-SP-CCAP OSSIv3.1-I04-15MMDD,
CenterFrequency"
::= { docsIf31CmtsDsOfdmChanPowerEntry 2 }
docsIf31CmtsDsOfdmChanPowerTxPower OBJECT-TYPE
SYNTAX TenthdBmV
UNITS "TenthdBmV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute provides an estimate of the average power
measured at the output of the CCAP in the downstream channel
set for this 6 MHz band.
If the docsIf31CmtsDsOfdmChanPowerBandIndex is 0, then this
attribute provides an estimate of the average power measured
at the output of the CCAP for a 6 MHz encompassed spectrum
containing the DOCSIS 3.1 PLC at its center."
::= { docsIf31CmtsDsOfdmChanPowerEntry 3 }
docsIf31CmtsUsOfdmaChanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsUsOfdmaChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object provides channel-level visibility into Upstream
OFDMA channel configuration and status."
::= { docsIf31MibObjects 23 }
docsIf31CmtsUsOfdmaChanEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsUsOfdmaChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsUsOfdmaChanTable."
INDEX {
ifIndex
}
::= { docsIf31CmtsUsOfdmaChanTable 1 }
DocsIf31CmtsUsOfdmaChanEntry ::= SEQUENCE {
docsIf31CmtsUsOfdmaChanTemplateIndex Unsigned32,
docsIf31CmtsUsOfdmaChanConfigChangeCt Unsigned32,
docsIf31CmtsUsOfdmaChanTargetRxPower TenthdBmV,
docsIf31CmtsUsOfdmaChanLowerBdryFreq Unsigned32,
docsIf31CmtsUsOfdmaChanUpperBdryFreq Unsigned32,
docsIf31CmtsUsOfdmaChanSubcarrierSpacing SubcarrierSpacingType,
docsIf31CmtsUsOfdmaChanCyclicPrefix UsOfdmaCyclicPrefix,
docsIf31CmtsUsOfdmaChanNumSymbolsPerFrame Unsigned32,
docsIf31CmtsUsOfdmaChanRollOffPeriod UsOfdmaRollOffPeriod,
docsIf31CmtsUsOfdmaChanPreEqEnable TruthValue,
docsIf31CmtsUsOfdmaChanFineRngGuardband Unsigned32,
docsIf31CmtsUsOfdmaChanFineRngNumSubcarriers Unsigned32,
docsIf31CmtsUsOfdmaChanFineRngPreambleLen Unsigned32,
docsIf31CmtsUsOfdmaChanInitRngGuardband Unsigned32,
docsIf31CmtsUsOfdmaChanInitRngNumSubcarriers Unsigned32,
docsIf31CmtsUsOfdmaChanInitRngPreambleLen Unsigned32,
docsIf31CmtsUsOfdmaChanProvAttribMask AttributeMask,
docsIf31CmtsUsOfdmaChanTxBackoffStart Integer32,
docsIf31CmtsUsOfdmaChanTxBackoffEnd Integer32,
docsIf31CmtsUsOfdmaChanRangingBackoffStart Integer32,
docsIf31CmtsUsOfdmaChanRangingBackoffEnd Integer32,
docsIf31CmtsUsOfdmaChanUtilization Unsigned32,
docsIf31CmtsUsOfdmaChanId ChId
}
docsIf31CmtsUsOfdmaChanTemplateIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the UsOfdmaModulationTemplate object which the
CMTS/CCAP utilized when configuring this channel."
::= { docsIf31CmtsUsOfdmaChanEntry 1 }
docsIf31CmtsUsOfdmaChanConfigChangeCt OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the value of the Configuration
Change Count field in the Upstream Channel Descriptor (UCD) MAC
Management Message currently in use on this channel."
::= { docsIf31CmtsUsOfdmaChanEntry 2 }
docsIf31CmtsUsOfdmaChanTargetRxPower OBJECT-TYPE
SYNTAX TenthdBmV
UNITS "TenthdBmV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power of the expected commanded received signal in the channel,
referenced to the CCAP input."
::= { docsIf31CmtsUsOfdmaChanEntry 3 }
docsIf31CmtsUsOfdmaChanLowerBdryFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute provides the lower frequency for the OFDMA US
channel."
::= { docsIf31CmtsUsOfdmaChanEntry 4 }
docsIf31CmtsUsOfdmaChanUpperBdryFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute provides the upper frequency for the OFDMA US
channel."
::= { docsIf31CmtsUsOfdmaChanEntry 5 }
docsIf31CmtsUsOfdmaChanSubcarrierSpacing OBJECT-TYPE
SYNTAX SubcarrierSpacingType
UNITS "kHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the subcarrier spacing associated with
a particular FFT mode configured on the OFDMA upstream channel."
::= { docsIf31CmtsUsOfdmaChanEntry 6 }
docsIf31CmtsUsOfdmaChanCyclicPrefix OBJECT-TYPE
SYNTAX UsOfdmaCyclicPrefix
UNITS "number of samples"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cyclic prefix assigned to this channel for mitigating
interference due to microreflections."
::= { docsIf31CmtsUsOfdmaChanEntry 7 }
docsIf31CmtsUsOfdmaChanNumSymbolsPerFrame OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the number of symbol periods per frame."
::= { docsIf31CmtsUsOfdmaChanEntry 8 }
docsIf31CmtsUsOfdmaChanRollOffPeriod OBJECT-TYPE
SYNTAX UsOfdmaRollOffPeriod
UNITS "number of samples"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the windowing roll-off period."
::= { docsIf31CmtsUsOfdmaChanEntry 9 }
docsIf31CmtsUsOfdmaChanPreEqEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates pre-equalization is enabled on the
OFDMA upstream channel when its value is true, or disabled when
its value is false."
::= { docsIf31CmtsUsOfdmaChanEntry 10 }
docsIf31CmtsUsOfdmaChanFineRngGuardband OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the sum of the upper and lower guard
bands for fine ranging in Hz."
::= { docsIf31CmtsUsOfdmaChanEntry 11 }
docsIf31CmtsUsOfdmaChanFineRngNumSubcarriers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the maximum number of subcarriers for
fine ranging."
::= { docsIf31CmtsUsOfdmaChanEntry 12 }
docsIf31CmtsUsOfdmaChanFineRngPreambleLen OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the length of the OFDMA fine ranging IUC
preamble in bits."
::= { docsIf31CmtsUsOfdmaChanEntry 13 }
docsIf31CmtsUsOfdmaChanInitRngGuardband OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the sum of the upper and lower guard bands
for initial ranging in Hz."
::= { docsIf31CmtsUsOfdmaChanEntry 14 }
docsIf31CmtsUsOfdmaChanInitRngNumSubcarriers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the maximum number of subcarriers for
initial ranging."
::= { docsIf31CmtsUsOfdmaChanEntry 15 }
docsIf31CmtsUsOfdmaChanInitRngPreambleLen OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the maximum number of subcarriers for
initial ranging."
::= { docsIf31CmtsUsOfdmaChanEntry 16 }
docsIf31CmtsUsOfdmaChanProvAttribMask OBJECT-TYPE
SYNTAX AttributeMask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute provides the Provisioned Attribute Mask for
the OFDMA upstream channel."
::= { docsIf31CmtsUsOfdmaChanEntry 17 }
docsIf31CmtsUsOfdmaChanTxBackoffStart OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The initial random backoff window to use when retrying
transmissions. Expressed as a power of 2. A value of 16
at the CMTS indicates that a proprietary adaptive retry
mechanism is to be used."
::= { docsIf31CmtsUsOfdmaChanEntry 18 }
docsIf31CmtsUsOfdmaChanTxBackoffEnd OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The final random backoff window to use when retrying
transmissions. Expressed as a power of 2. A value of 16
at the CMTS indicates that a proprietary adaptive retry
mechanism is to be used."
::= { docsIf31CmtsUsOfdmaChanEntry 19 }
docsIf31CmtsUsOfdmaChanRangingBackoffStart OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The initial random backoff window to use when retrying
Ranging Requests. Expressed as a power of 2. A value of
16 at the CMTS indicates that a proprietary adaptive retry
mechanism is to be used."
::= { docsIf31CmtsUsOfdmaChanEntry 20 }
docsIf31CmtsUsOfdmaChanRangingBackoffEnd OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The final random backoff window to use when retrying
Ranging Requests. Expressed as a power of 2. A value of
16 at the CMTS indicates that a proprietary adaptive retry
mechanism is to be used."
::= { docsIf31CmtsUsOfdmaChanEntry 21 }
docsIf31CmtsUsOfdmaChanUtilization OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calculated and truncated utilization for this physical
upstream channel, accurate as of the most recent
docsIfCmtsChannelUtilizationInterval.
The upstream channel utilization is expressed as a percentage
of minislots utilized on the physical channel, regardless of
burst type.
The utilization calculation can be expressed by the
following equation:
Utilization = MinislotsUtilized/MinislotsAllocated * 100%
For an Initial Maintenance region, the minislots for the
complete region are considered utilized if the CMTS received
an upstream burst within the region from any CM on the physical
channel. For contention REQ and REQ/DATA regions, the minislots
for a transmission opportunity within the region are considered
utilized if the CMTS received an upstream burst within the
opportunity from any CM on the physical channel. For all other
regions, utilized minislots are those in which the CMTS granted
bandwidth to any unicast SID on the physical channel.
For an upstream interface that has multiple logical upstream
channels enabled, the utilization index is a weighted sum of
utilization indices for the logical channels. The weight for
each utilization index is the percentage of upstream mini-slots
allocated for the corresponding logical channel.
Example:
If 75% of bandwidth is allocated to the first logical channel
and 25% to the second, and the utilization for each are 60 and 40,
respectively, the utilization for the upstream physical channel is
(60 * 0.75) + (40 * 0.25) = 55. This figure applies to the most
recent utilization interval."
::= { docsIf31CmtsUsOfdmaChanEntry 22 }
docsIf31CmtsUsOfdmaChanId OBJECT-TYPE
SYNTAX ChId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the upstream Channel Id signaled in the
DOCSIS protocol for the OFDMA upstream channel. The Channel
Id is unique within the associated MacDomain."
::= { docsIf31CmtsUsOfdmaChanEntry 23 }
docsIf31CmtsUsOfdmaDataIucStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsUsOfdmaDataIucStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CMTS table provides DS OFDM statistics on a per Profile basis."
::= { docsIf31MibObjects 24 }
docsIf31CmtsUsOfdmaDataIucStatsEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsUsOfdmaDataIucStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsUsOfdmaDataIucStatsTable.
An instance exists for each Data IUC profile on a given
US OFDMA channel."
INDEX {
ifIndex,
docsIf31CmtsUsOfdmaDataIucStatsDataIuc
}
::= { docsIf31CmtsUsOfdmaDataIucStatsTable 1 }
DocsIf31CmtsUsOfdmaDataIucStatsEntry ::=
SEQUENCE {
docsIf31CmtsUsOfdmaDataIucStatsDataIuc Unsigned32,
docsIf31CmtsUsOfdmaDataIucStatsMinislotPilotPattern Unsigned32,
docsIf31CmtsUsOfdmaDataIucStatsMinislotModulation UsOfdmaModulationType,
docsIf31CmtsUsOfdmaDataIucStatsTotalCodewords Counter64,
docsIf31CmtsUsOfdmaDataIucStatsCorrectedCodewords Counter64,
docsIf31CmtsUsOfdmaDataIucStatsUnreliableCodewords Counter64,
docsIf31CmtsUsOfdmaDataIucStatsInOctets Counter64,
docsIf31CmtsUsOfdmaDataIucStatsCtrDiscontinuityTime TimeStamp
}
docsIf31CmtsUsOfdmaDataIucStatsDataIuc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute represents the OFDMA Data IUC that these
statistics correspond to."
::= { docsIf31CmtsUsOfdmaDataIucStatsEntry 1 }
docsIf31CmtsUsOfdmaDataIucStatsMinislotPilotPattern OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the identifier for the default pilot
pattern specified in the template for minislots using this
Data IUC. The valid range is 1 - 14."
::= { docsIf31CmtsUsOfdmaDataIucStatsEntry 2 }
docsIf31CmtsUsOfdmaDataIucStatsMinislotModulation OBJECT-TYPE
SYNTAX UsOfdmaModulationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the default modulation order specified
in the template for minislots using this Data IUC."
::= { docsIf31CmtsUsOfdmaDataIucStatsEntry 3 }
docsIf31CmtsUsOfdmaDataIucStatsTotalCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the count of the total number of
FEC codewords received on this channel using this Data IUC.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmtsUsOfdmaDataIucStats-
CtrDiscontinuityTime."
::= { docsIf31CmtsUsOfdmaDataIucStatsEntry 4 }
docsIf31CmtsUsOfdmaDataIucStatsCorrectedCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the count of codewords received
on this channel using this Data IUC that failed the pre-decoding
syndrome check, but passed the post-decoding syndrome check.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmtsUsOfdmaDataIucStats-
CtrDiscontinuityTime."
::= { docsIf31CmtsUsOfdmaDataIucStatsEntry 5 }
docsIf31CmtsUsOfdmaDataIucStatsUnreliableCodewords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the count of codewords received on
this channel using this Data IUC that failed the post-decoding
syndrome check.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmtsUsOfdmaDataIucStats-
CtrDiscontinuityTime."
::= { docsIf31CmtsUsOfdmaDataIucStatsEntry 6 }
docsIf31CmtsUsOfdmaDataIucStatsInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the count of MAC-layer octets received
by the CCAP on this Data IUC. This value is the size of all
unicast, multicast or broadcast frames (including all MAC-
layer framing) and CCF PMD overhead (segment headers and
stuffing bytes) delivered from the Phy to the MAC; this
includes user data, DOCSIS MAC Management Messages, etc.
Discontinuities in the value of this counter can occur at
reinitialization of the managed system, and at other times as
indicated by the value of docsIf31CmtsUsOfdmaDataIucStats-
CtrDiscontinuityTime."
::= { docsIf31CmtsUsOfdmaDataIucStatsEntry 7 }
docsIf31CmtsUsOfdmaDataIucStatsCtrDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the value of sysUpTime on the most recent
occasion at which any one or more of this entry's counters
suffered a discontinuity. If no such discontinuities have
occurred since the last re-initialization of the local
management subsystem, then this attribute contains a zero value."
::= { docsIf31CmtsUsOfdmaDataIucStatsEntry 8 }
docsIf31CmtsUsOfdmaDataIucDetailStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsUsOfdmaDataIucDetailStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CMTS table provides exceptions to the US channel template
for this Data IUC."
::= { docsIf31MibObjects 25 }
docsIf31CmtsUsOfdmaDataIucDetailStatusEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsUsOfdmaDataIucDetailStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsUsOfdmaDataIucDetailStatusTable.
An instance exists for each exception to the template for a Data
IUC profile on a given US OFDMA channel."
INDEX {
ifIndex,
docsIf31CmtsUsOfdmaDataIucStatsDataIuc,
docsIf31CmtsUsOfdmaDataIucDetailStatusLowerFreq
}
::= { docsIf31CmtsUsOfdmaDataIucDetailStatusTable 1 }
DocsIf31CmtsUsOfdmaDataIucDetailStatusEntry ::=
SEQUENCE {
docsIf31CmtsUsOfdmaDataIucDetailStatusLowerFreq Unsigned32,
docsIf31CmtsUsOfdmaDataIucDetailStatusUpperFreq Unsigned32,
docsIf31CmtsUsOfdmaDataIucDetailStatusMinislotPilotPattern Unsigned32,
docsIf31CmtsUsOfdmaDataIucDetailStatusMinislotModulation
UsOfdmaModulationType
}
docsIf31CmtsUsOfdmaDataIucDetailStatusLowerFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute indicates the lower frequency where the
minislots will use the pilot pattern and modulation"
::= { docsIf31CmtsUsOfdmaDataIucDetailStatusEntry 1 }
docsIf31CmtsUsOfdmaDataIucDetailStatusUpperFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the upper frequency where the
minislots will use the pilot pattern and modulation"
::= { docsIf31CmtsUsOfdmaDataIucDetailStatusEntry 2 }
docsIf31CmtsUsOfdmaDataIucDetailStatusMinislotPilotPattern OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the identifier for the pilot
pattern this frequency range. All minislots in the frequency
range have this pilot pattern. The valid range is 1 - 14."
::= { docsIf31CmtsUsOfdmaDataIucDetailStatusEntry 3 }
docsIf31CmtsUsOfdmaDataIucDetailStatusMinislotModulation OBJECT-TYPE
SYNTAX UsOfdmaModulationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the modulation order for this
frequency range. All minislots in the frequency range have
this modulation."
::= { docsIf31CmtsUsOfdmaDataIucDetailStatusEntry 4 }
docsIf31CmtsUsOfdmaRangingIucStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsUsOfdmaRangingIucStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This CMTS table provides details on status of ranging IUCs."
::= { docsIf31MibObjects 26 }
docsIf31CmtsUsOfdmaRangingIucStatusEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsUsOfdmaRangingIucStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsUsOfdmaRangingIucStatusTable.
An instance exists for each Ranging IUC profile on a given
US OFDMA channel."
INDEX {
ifIndex,
docsIf31CmtsUsOfdmaRangingIucStatusIuc
}
::= { docsIf31CmtsUsOfdmaRangingIucStatusTable 1 }
DocsIf31CmtsUsOfdmaRangingIucStatusEntry ::=
SEQUENCE {
docsIf31CmtsUsOfdmaRangingIucStatusIuc Unsigned32,
docsIf31CmtsUsOfdmaRangingIucStatusGuardband Unsigned32,
docsIf31CmtsUsOfdmaRangingIucStatusNumSubcarriers Unsigned32
}
docsIf31CmtsUsOfdmaRangingIucStatusIuc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute indicates the OFDMA Ranging IUC that this
status information corresponds to."
::= { docsIf31CmtsUsOfdmaRangingIucStatusEntry 1 }
docsIf31CmtsUsOfdmaRangingIucStatusGuardband OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the sum of the upper and lower guard bands
for this ranging IUC in Hz. "
::= { docsIf31CmtsUsOfdmaRangingIucStatusEntry 2 }
docsIf31CmtsUsOfdmaRangingIucStatusNumSubcarriers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the maximum number of subcarriers
for this ranging IUC."
::= { docsIf31CmtsUsOfdmaRangingIucStatusEntry 3 }
docsIf31CmtsDsOfdmSubcarrierTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsDsOfdmSubcarrierTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the subcarrier type for a group of subcarriers
in the active spectrum of this OFDM channel. Groups of subcarriers of
the same type are presented together; non-data subcarriers in these
ranges are ignored."
::= { docsIf31MibObjects 27 }
docsIf31CmtsDsOfdmSubcarrierTypeEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsDsOfdmSubcarrierTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsDsOfdmSubcarrierTypeTable.
An instance exists for each OFDM downstream channel."
INDEX {
ifIndex,
docsIf31CmtsDsOfdmSubcarrierTypeStartSubcarrierId
}
::= { docsIf31CmtsDsOfdmSubcarrierTypeTable 1 }
DocsIf31CmtsDsOfdmSubcarrierTypeEntry ::=
SEQUENCE {
docsIf31CmtsDsOfdmSubcarrierTypeStartSubcarrierId Unsigned32,
docsIf31CmtsDsOfdmSubcarrierTypeEndSubcarrierId Unsigned32,
docsIf31CmtsDsOfdmSubcarrierTypeSubcarrierType INTEGER
}
docsIf31CmtsDsOfdmSubcarrierTypeStartSubcarrierId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute is a key defined to provide an index into the table
and represents the subcarrier number of the first subcarrier in the
group. "
::= { docsIf31CmtsDsOfdmSubcarrierTypeEntry 1 }
docsIf31CmtsDsOfdmSubcarrierTypeEndSubcarrierId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the subcarrier number of the last subcarrier in
the group. "
::= { docsIf31CmtsDsOfdmSubcarrierTypeEntry 2 }
docsIf31CmtsDsOfdmSubcarrierTypeSubcarrierType OBJECT-TYPE
SYNTAX INTEGER {
data(1),
plc(2),
continuousPilot(3),
excluded(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies which type of subcarrier is represented in
this group."
::= { docsIf31CmtsDsOfdmSubcarrierTypeEntry 3 }
docsIf31CmtsUsOfdmaSubcarrierTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmtsUsOfdmaSubcarrierTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the subcarrier type for a group of subcarriers
in the active spectrum of this OFDMA channel. Groups of subcarriers of
the same type are presented together; non-data subcarriers in these
ranges are ignored."
::= { docsIf31MibObjects 28 }
docsIf31CmtsUsOfdmaSubcarrierTypeEntry OBJECT-TYPE
SYNTAX DocsIf31CmtsUsOfdmaSubcarrierTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmtsUsOfdmaSubcarrierStatusTable.
An instance exists for each Profile on a given OFDMA upstream."
INDEX {
ifIndex,
docsIf31CmtsUsOfdmaSubcarrierTypeStartSubcarrierId
}
::= { docsIf31CmtsUsOfdmaSubcarrierTypeTable 1 }
DocsIf31CmtsUsOfdmaSubcarrierTypeEntry ::=
SEQUENCE {
docsIf31CmtsUsOfdmaSubcarrierTypeStartSubcarrierId Unsigned32,
docsIf31CmtsUsOfdmaSubcarrierTypeEndSubcarrierId Unsigned32,
docsIf31CmtsUsOfdmaSubcarrierTypeSubcarrierType INTEGER
}
docsIf31CmtsUsOfdmaSubcarrierTypeStartSubcarrierId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute is a key defined to provide an index into the table
and represents the subcarrier number of the first subcarrier in the
group. "
::= { docsIf31CmtsUsOfdmaSubcarrierTypeEntry 1 }
docsIf31CmtsUsOfdmaSubcarrierTypeEndSubcarrierId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is the subcarrier number of the last subcarrier in
the group. "
::= { docsIf31CmtsUsOfdmaSubcarrierTypeEntry 2 }
docsIf31CmtsUsOfdmaSubcarrierTypeSubcarrierType OBJECT-TYPE
SYNTAX INTEGER {
data(1),
excluded(2),
unused(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies which type of subcarrier is represented in
this group."
::= { docsIf31CmtsUsOfdmaSubcarrierTypeEntry 3 }
docsIf31CmStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines attributes of the CM status.
This object is an extension to the SNMP table
docsIf3CmStatusTable."
::= { docsIf31MibObjects 29 }
docsIf31CmStatusEntry OBJECT-TYPE
SYNTAX DocsIf31CmStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmStatusTable.
An instance exist for the CM MAC Domain Interface."
INDEX {
ifIndex
}
::= { docsIf31CmStatusTable 1 }
DocsIf31CmStatusEntry ::= SEQUENCE {
docsIf31CmStatusEmDlsOperStatus
TruthValue
}
docsIf31CmStatusEmDlsOperStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates whether the CM is currently operating
in Energy Management DLS Mode. If this attribute returns true,
the CM is operating in Energy Management DLS Mode."
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.1-I08-151210,
Energy Management Mode Indicator section."
::= { docsIf31CmStatusEntry 1 }
docsIf31CmEmDlsCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIf31CmEmDlsCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object provides configuration state information
on the CM for the Energy Management 1x1 Mode feature."
REFERENCE
"DOCSIS 3.1 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.1-I08-151210,
Energy Management DLS Encodings section."
::= { docsIf31MibObjects 30 }
docsIf31CmEmDlsCfgEntry OBJECT-TYPE
SYNTAX DocsIf31CmEmDlsCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsIf31CmEmDlsCfgTable."
INDEX {
docsIf31CmEmDlsCfgDirection
}
::= { docsIf31CmEmDlsCfgTable 1 }
DocsIf31CmEmDlsCfgEntry ::= SEQUENCE {
docsIf31CmEmDlsCfgDirection
IfDirection,
docsIf31CmEmDlsCfgEntryBitrateThrshld
Unsigned32,
docsIf31CmEmDlsCfgEntryTimeThrshld
Unsigned32,
docsIf31CmEmDlsCfgExitBitrateThrshld
Unsigned32,
docsIf31CmEmDlsCfgExitTimeThrshld
Unsigned32
}
docsIf31CmEmDlsCfgDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index indicates whether the threshold applies to the
upstream or downstream."
::= { docsIf31CmEmDlsCfgEntry 1 }
docsIf31CmEmDlsCfgEntryBitrateThrshld OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the upstream or downstream bitrate
threshold (in bps) below which the CM will request to enter
Energy Management DLS Mode operation."
::= { docsIf31CmEmDlsCfgEntry 2 }
docsIf31CmEmDlsCfgEntryTimeThrshld OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the number of consecutive seconds
that the upstream or downstream data rate needs to remain below
the Upstream or Downstream Entry Bitrate Threshold in order to
determine that a transition to Energy Management DLS Mode is
required."
::= { docsIf31CmEmDlsCfgEntry 3 }
docsIf31CmEmDlsCfgExitBitrateThrshld OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the upstream or downstream bitrate
threshold (in bps) above which the CM will request to leave
Energy Management DLS Mode operation."
::= { docsIf31CmEmDlsCfgEntry 4 }
docsIf31CmEmDlsCfgExitTimeThrshld OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the number of consecutive seconds
that the upstream or downstream data rate needs to remain above
the Upstream or Downstream Exit Bitrate Threshold in order to
determine that a transition out of Energy Management DLS Mode
is required."
::= { docsIf31CmEmDlsCfgEntry 5 }
-- Conformance Definitions
docsIf31MibConformance OBJECT IDENTIFIER ::= { docsIf31Mib 2 }
docsIf31MibCompliances OBJECT IDENTIFIER ::= { docsIf31MibConformance 1 }
docsIf31MibGroups OBJECT IDENTIFIER ::= { docsIf31MibConformance 2 }
docsIf31CmtsCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the CMTS."
MODULE -- this MODULE
MANDATORY-GROUPS {
docsIf31CmtsGroup
}
::= { docsIf31MibCompliances 1 }
docsIf31CmCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the CM."
MODULE -- this MODULE
MANDATORY-GROUPS {
docsIf31CmGroup
}
::= { docsIf31MibCompliances 2 }
docsIf31CmtsGroup OBJECT-GROUP
OBJECTS {
docsIf31RxChStatusPrimaryDsIndicator,
docsIf31CmtsCmRegStatusDsProfileIdList,
docsIf31CmtsCmRegStatusUsProfileIucList,
docsIf31CmtsCmRegStatusTcsPhigh,
docsIf31CmtsCmRegStatusTcsDrwTop,
docsIf31CmtsCmRegStatusMinUsableDsFreq,
docsIf31CmtsCmRegStatusMaxUsableDsFreq,
docsIf31CmtsCmRegStatusMaxUsableUsFreq,
docsIf31CmtsCmRegStatusPartialSvcState,
docsIf31CmtsCmRegStatusPartialChanState,
docsIf31CmtsCmUsOfdmaChannelRxPower,
docsIf31CmtsCmUsOfdmaChannelMeanRxMer,
docsIf31CmtsCmUsOfdmaChannelStdDevRxMer,
docsIf31CmtsCmUsOfdmaChannelRxMerThreshold,
docsIf31CmtsCmUsOfdmaChannelThresholdRxMerValue,
docsIf31CmtsCmUsOfdmaChannelThresholdRxMerHighestFreq,
docsIf31CmtsCmUsOfdmaChannelMicroreflections,
docsIf31CmtsCmUsOfdmaChannelHighResolutionTimingOffset,
docsIf31CmtsCmUsOfdmaChannelIsMuted,
docsIf31CmtsCmUsOfdmaChannelRangingStatus,
docsIf31CmtsCmUsOfdmaChannelCurPartialSvcReasonCode,
docsIf31CmtsCmUsOfdmaChannelLastPartialSvcTime,
docsIf31CmtsCmUsOfdmaChannelLastPartialSvcReasonCode,
docsIf31CmtsCmUsOfdmaChannelNumPartialSvcIncidents,
docsIf31CmtsCmUsOfdmaChannelNumPartialChanIncidents,
docsIf31CmtsCmUsOfdmaProfileTotalCodewords,
docsIf31CmtsCmUsOfdmaProfileCorrectedCodewords,
docsIf31CmtsCmUsOfdmaProfileUnreliableCodewords,
docsIf31CmtsCmUsOfdmaProfileLastPartialChanTime,
docsIf31CmtsCmUsOfdmaProfileLastPartialChanReasonCode,
docsIf31CmtsCmUsOfdmaProfilePartialChanReasonCode,
docsIf31CmtsCmDsOfdmChannelCurPartialSvcReasonCode,
docsIf31CmtsCmDsOfdmChannelLastPartialSvcTime,
docsIf31CmtsCmDsOfdmChannelLastPartialSvcReasonCode,
docsIf31CmtsCmDsOfdmChannelNumPartialSvcIncidents,
docsIf31CmtsCmDsOfdmChannelNumPartialChanIncidents,
docsIf31CmtsCmDsOfdmProfileTotalCodewords,
docsIf31CmtsCmDsOfdmProfilePartialChanReasonCode,
docsIf31CmtsCmDsOfdmProfileLastPartialChanTime,
docsIf31CmtsCmDsOfdmProfileLastPartialChanReasonCode,
docsIf31CmtsCmEmStatsEm1x1ModeTotalDuration,
docsIf31CmtsCmEmStatsDlsModeTotalDuration,
docsIf31CmtsCmEmStatsLastDlsTime,
docsIf31CmtsCmEmStatsDlsWakeupEvents,
docsIf31CmtsDsOfdmChanChannelId,
docsIf31CmtsDsOfdmChanLowerBdryFreq,
docsIf31CmtsDsOfdmChanUpperBdryFreq,
docsIf31CmtsDsOfdmChanLowerBdryEncompSpectrum,
docsIf31CmtsDsOfdmChanUpperBdryEncompSpectrum,
docsIf31CmtsDsOfdmChanPlcFreq,
docsIf31CmtsDsOfdmChanSubcarrierZeroFreq,
docsIf31CmtsDsOfdmChanFirstActiveSubcarrierNum,
docsIf31CmtsDsOfdmChanLastActiveSubcarrierNum,
docsIf31CmtsDsOfdmChanNumActiveSubcarriers,
docsIf31CmtsDsOfdmChanSubcarrierSpacing,
docsIf31CmtsDsOfdmChanLowerGuardbandWidth,
docsIf31CmtsDsOfdmChanUpperGuardbandWidth,
docsIf31CmtsDsOfdmChanCyclicPrefix,
docsIf31CmtsDsOfdmChanRollOffPeriod,
docsIf31CmtsDsOfdmChanTimeInterleaverDepth,
docsIf31CmtsDsOfdmChanNumPilots,
docsIf31CmtsDsOfdmChanPilotScaleFactor,
docsIf31CmtsDsOfdmChanNcpModulation,
docsIf31CmtsDsOfdmChanUtilization,
docsIf31CmtsDsOfdmProfileStatsConfigChangeCt,
docsIf31CmtsDsOfdmProfileStatsFullChannelSpeed,
docsIf31CmtsDsOfdmProfileStatsOutOctets,
docsIf31CmtsDsOfdmProfileStatsOutUnicastOctets,
docsIf31CmtsDsOfdmProfileStatsOutMulticastOctets,
docsIf31CmtsDsOfdmProfileStatsOutFrames,
docsIf31CmtsDsOfdmProfileStatsOutUnicastFrames,
docsIf31CmtsDsOfdmProfileStatsOutMulticastFrames,
docsIf31CmtsDsOfdmProfileStatsCtrDiscontinuityTime,
docsIf31CmtsDsOfdmSubcarrierStatusEndId,
docsIf31CmtsDsOfdmSubcarrierStatusModulation,
docsIf31CmtsDsOfdmChanPowerCenterFrequency,
docsIf31CmtsDsOfdmChanPowerTxPower,
docsIf31CmtsUsOfdmaChanTemplateIndex,
docsIf31CmtsUsOfdmaChanConfigChangeCt,
docsIf31CmtsUsOfdmaChanTargetRxPower,
docsIf31CmtsUsOfdmaChanLowerBdryFreq,
docsIf31CmtsUsOfdmaChanUpperBdryFreq,
docsIf31CmtsUsOfdmaChanSubcarrierSpacing,
docsIf31CmtsUsOfdmaChanCyclicPrefix,
docsIf31CmtsUsOfdmaChanNumSymbolsPerFrame,
docsIf31CmtsUsOfdmaChanRollOffPeriod,
docsIf31CmtsUsOfdmaChanPreEqEnable,
docsIf31CmtsUsOfdmaChanFineRngGuardband,
docsIf31CmtsUsOfdmaChanFineRngNumSubcarriers,
docsIf31CmtsUsOfdmaChanFineRngPreambleLen,
docsIf31CmtsUsOfdmaChanInitRngGuardband,
docsIf31CmtsUsOfdmaChanInitRngNumSubcarriers,
docsIf31CmtsUsOfdmaChanInitRngPreambleLen,
docsIf31CmtsUsOfdmaChanProvAttribMask,
docsIf31CmtsUsOfdmaChanTxBackoffStart,
docsIf31CmtsUsOfdmaChanTxBackoffEnd,
docsIf31CmtsUsOfdmaChanRangingBackoffStart,
docsIf31CmtsUsOfdmaChanRangingBackoffEnd,
docsIf31CmtsUsOfdmaChanUtilization,
docsIf31CmtsUsOfdmaChanId,
docsIf31CmtsUsOfdmaDataIucStatsMinislotPilotPattern,
docsIf31CmtsUsOfdmaDataIucStatsMinislotModulation,
docsIf31CmtsUsOfdmaDataIucStatsTotalCodewords,
docsIf31CmtsUsOfdmaDataIucStatsCorrectedCodewords,
docsIf31CmtsUsOfdmaDataIucStatsUnreliableCodewords,
docsIf31CmtsUsOfdmaDataIucStatsInOctets,
docsIf31CmtsUsOfdmaDataIucStatsCtrDiscontinuityTime,
docsIf31CmtsUsOfdmaDataIucDetailStatusUpperFreq,
docsIf31CmtsUsOfdmaDataIucDetailStatusMinislotPilotPattern,
docsIf31CmtsUsOfdmaDataIucDetailStatusMinislotModulation,
docsIf31CmtsDsOfdmSubcarrierTypeEndSubcarrierId,
docsIf31CmtsDsOfdmSubcarrierTypeSubcarrierType,
docsIf31CmtsUsOfdmaSubcarrierTypeEndSubcarrierId,
docsIf31CmtsUsOfdmaSubcarrierTypeSubcarrierType
}
STATUS current
DESCRIPTION
"Group of objects implemented in a DOCSIS 3.1 CMTS"
::= { docsIf31MibGroups 1 }
docsIf31CmGroup OBJECT-GROUP
OBJECTS {
docsIf31CmDocsisBaseCapability,
docsIf31CmDsOfdmChanChannelId,
docsIf31CmDsOfdmChanChanIndicator,
docsIf31CmDsOfdmChanSubcarrierZeroFreq,
docsIf31CmDsOfdmChanFirstActiveSubcarrierNum,
docsIf31CmDsOfdmChanLastActiveSubcarrierNum,
docsIf31CmDsOfdmChanNumActiveSubcarriers,
docsIf31CmDsOfdmChanSubcarrierSpacing,
docsIf31CmDsOfdmChanCyclicPrefix,
docsIf31CmDsOfdmChanRollOffPeriod,
docsIf31CmDsOfdmChanPlcFreq,
docsIf31CmDsOfdmChanNumPilots,
docsIf31CmDsOfdmChanTimeInterleaverDepth,
docsIf31CmDsOfdmChanPlcTotalCodewords,
docsIf31CmDsOfdmChanPlcUnreliableCodewords,
docsIf31CmDsOfdmChanNcpTotalFields,
docsIf31CmDsOfdmChanNcpFieldCrcFailures,
docsIf31CmEmDlsStatsNumberTimesCrossedBelowUsEntryThrshlds,
docsIf31CmEmDlsStatsNumberTimesCrossedBelowDsEntryThrshlds,
docsIf31CmEmDlsStatsTotalDuration,
docsIf31CmEmDlsStatsTotalDurationBelowUsThrshlds,
docsIf31CmEmDlsStatsTotalDurationBelowDsThrshlds,
docsIf31CmEmDlsStatsTotalDurationBelowUsDsThrshlds,
docsIf31CmEmDlsStatsNumSleepLatencyTriggers,
docsIf31CmEmDlsStatsNumSleepByteCtTriggers,
docsIf31CmEmDlsStatusReceiveTimer,
docsIf31CmEmDlsStatusMaxSleepLatency,
docsIf31CmEmDlsStatusMaxSleepBytes,
docsIf31CmSystemCfgStateDiplexerCapability,
docsIf31CmSystemCfgStateDiplexerCfgBandEdge,
docsIf31CmDsOfdmProfileStatsConfigChangeCt,
docsIf31CmDsOfdmProfileStatsTotalCodewords,
docsIf31CmDsOfdmProfileStatsCorrectedCodewords,
docsIf31CmDsOfdmProfileStatsUncorrectableCodewords,
docsIf31CmDsOfdmProfileStatsInOctets,
docsIf31CmDsOfdmProfileStatsInUnicastOctets,
docsIf31CmDsOfdmProfileStatsInMulticastOctets,
docsIf31CmDsOfdmProfileStatsInFrames,
docsIf31CmDsOfdmProfileStatsInUnicastFrames,
docsIf31CmDsOfdmProfileStatsInMulticastFrames,
docsIf31CmDsOfdmProfileStatsInFrameCrcFailures,
docsIf31CmDsOfdmProfileStatsCtrDiscontinuityTime,
docsIf31CmDsOfdmChannelPowerCenterFrequency,
docsIf31CmDsOfdmChannelPowerRxPower,
docsIf31CmStatusOfdmaUsT3Timeouts,
docsIf31CmStatusOfdmaUsT4Timeouts,
docsIf31CmStatusOfdmaUsRangingAborteds,
docsIf31CmStatusOfdmaUsT3Exceededs,
docsIf31CmStatusOfdmaUsIsMuted,
docsIf31CmStatusOfdmaUsRangingStatus,
docsIf31CmUsOfdmaChanConfigChangeCt,
docsIf31CmUsOfdmaChanSubcarrierZeroFreq,
docsIf31CmUsOfdmaChanFirstActiveSubcarrierNum,
docsIf31CmUsOfdmaChanLastActiveSubcarrierNum,
docsIf31CmUsOfdmaChanNumActiveSubcarriers,
docsIf31CmUsOfdmaChanSubcarrierSpacing,
docsIf31CmUsOfdmaChanCyclicPrefix,
docsIf31CmUsOfdmaChanRollOffPeriod,
docsIf31CmUsOfdmaChanNumSymbolsPerFrame,
docsIf31CmUsOfdmaChanTxPower,
docsIf31CmUsOfdmaChanPreEqEnabled,
docsIf31CmUsOfdmaProfileStatsOutOctets,
docsIf31CmUsOfdmaProfileStatsCtrDiscontinuityTime,
docsIf31CmUsOfdmaMinislotCfgStateFirstSubcarrierId,
docsIf31CmUsOfdmaMinislotCfgStateNumConsecutiveMinislots,
docsIf31CmUsOfdmaMinislotCfgStateMinislotPilotPattern,
docsIf31CmUsOfdmaMinislotCfgStateDataSymbolModulation,
docsIf31CmStatusEmDlsOperStatus,
docsIf31CmEmDlsCfgEntryBitrateThrshld,
docsIf31CmEmDlsCfgEntryTimeThrshld,
docsIf31CmEmDlsCfgExitBitrateThrshld,
docsIf31CmEmDlsCfgExitTimeThrshld
}
STATUS current
DESCRIPTION
"Group of objects implemented in a DOCSIS 3.1 CM"
::= { docsIf31MibGroups 2 }
END
View Git Blame Copy Permalink