2280 lines
72 KiB
Plaintext
2280 lines
72 KiB
Plaintext
|
|
-- *****************************************************************
|
|
-- Moxa EtherDevice Switch EDS508 MIB
|
|
-- 2005-03-23
|
|
-- Copyright (c) 2005 by Moxa Networking Co., Ltd.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
--
|
|
|
|
MOXA-EDS508-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
enterprises, IpAddress, OBJECT-TYPE FROM SNMPv2-SMI
|
|
DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC;
|
|
|
|
moxa OBJECT IDENTIFIER ::= { enterprises 8691 } -- 1.3.6.1.4.1.8691
|
|
|
|
industrialEthernet OBJECT IDENTIFIER ::= { moxa 7 } -- 1.3.6.1.4.1.8691.7
|
|
|
|
etherDeviceSwitch MODULE-IDENTITY
|
|
LAST-UPDATED "200503220000Z"
|
|
ORGANIZATION "Moxa Networking,Inc."
|
|
CONTACT-INFO
|
|
"Postal: Moxa Networking,Inc.
|
|
Fl.8, No.6,Alley 6,Lane 235,Pao-Chiao Rd.
|
|
Shing Tien City,Taipei,Taiwan,R.O.C
|
|
|
|
Tel: +866-2-29101230 "
|
|
|
|
DESCRIPTION
|
|
"The MIB module for Moxa EDS-508 series specific information."
|
|
|
|
REVISION "200503230000Z"
|
|
DESCRIPTION
|
|
"Added new SYNTAX INTEGER to portMDI for:
|
|
no(3)"
|
|
|
|
REVISION "200503220000Z"
|
|
DESCRIPTION
|
|
"Modify 'multicastIpGroup' to 'igmpSnoopingIpGroup' from the index of 'igmpSnoopingMulticastGroupEntry'."
|
|
|
|
REVISION "200503170000Z"
|
|
DESCRIPTION
|
|
"Fix compile-error in HPOpenView."
|
|
|
|
REVISION "200412080000Z"
|
|
DESCRIPTION
|
|
"Modify the range of DisplayString Size from (1..255) to (1..512).
|
|
|
|
Modify the range of portIndex of PortEntry from (1..12) to (1..8).
|
|
|
|
Modify the range of portIndex of PortEntry from (1..12) to (1..8).
|
|
|
|
Modify the range of monitorPortIndex of MonitorPortEntry from (1..12) to (1..8).
|
|
|
|
Modify the range of emailWarningPortIndex of EmailWarningEventPortEntry from (1..12) to (1..8)
|
|
|
|
Modify the range of targetPort from (1..12) to (1..8).
|
|
|
|
Modify the range of mirroringPort from (1..12) to (1..8).
|
|
|
|
Redefine the SYNTAX INTEGER of protocolOfRedundancySetup from { none(0), spanningTree(1), turboRing(2) } to { spanningTree(1), turboRing(2) }.
|
|
|
|
Redefine the SYNTAX INTEGER of spanningTreeBridgePriority.
|
|
|
|
Redefine the SYNTAX INTEGER of spanningTreePortPriority.
|
|
|
|
Add activeProtocolOfRedundancy MIB object."
|
|
|
|
REVISION "200408310000Z"
|
|
DESCRIPTION
|
|
"Add portTrunkingGroup to portEntry."
|
|
|
|
REVISION "200407190000Z"
|
|
DESCRIPTION
|
|
"Modify the moxa's enterprises oid from 8619 to 8691.
|
|
|
|
Fix the monitorPortIndex object's definition from monitorEntry to monitorPortEntry.
|
|
|
|
Fix diRelayWarningEntry definition problem.
|
|
|
|
Modify the object name of neworkingSetting.1 from serverIpAddr to switchIpAddr.
|
|
|
|
Modify the object name of neworkingSetting.2 from serverIpMask to switchIpMask.
|
|
|
|
Modify the object name of emailService.1 from emailWarningMailServerIpAddr to emailWarningMailServer.
|
|
|
|
Restrict the range of portDefaultVid to be between 1 and 4094.
|
|
|
|
Restrict the range of vlanId to be between 1 and 4094.
|
|
|
|
Add managementVlanId MIB object.
|
|
|
|
Add enableGlobalIgmpSnooping MIB object.
|
|
|
|
Added enumerated values to ingressNormalPriLimitRate for:
|
|
Limit 16Mbps.
|
|
|
|
Added enumerated values to ingressMediumlPriLimitRate for:
|
|
Limit 16Mbps.
|
|
Limit 32Mbps.
|
|
|
|
Added enumerated values to ingressHighPriLimitRate for:
|
|
Limit 16Mbps.
|
|
Limit 32Mbps.
|
|
Limit 64Mbps."
|
|
|
|
::= { industrialEthernet 1 } -- 1.3.6.1.4.1.8691.7.1
|
|
|
|
DisplayString ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
SYNTAX OCTET STRING (SIZE (0..512))
|
|
|
|
portsNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Ports."
|
|
::= { etherDeviceSwitch 1 }
|
|
|
|
switchModel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch model."
|
|
::= { etherDeviceSwitch 2 }
|
|
|
|
firmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The firmware version."
|
|
::= { etherDeviceSwitch 4 }
|
|
|
|
enableWebConfig OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the Web. configuration function."
|
|
::= { etherDeviceSwitch 5 }
|
|
|
|
enableTelnetConsole OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable telnet console."
|
|
::= { etherDeviceSwitch 6 }
|
|
|
|
lineSwapRecovery OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable line-swap-fast-recovery function."
|
|
::= { etherDeviceSwitch 7 }
|
|
|
|
|
|
networkSetting OBJECT IDENTIFIER ::= { etherDeviceSwitch 8 }
|
|
|
|
switchIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of this switch."
|
|
::= { networkSetting 1 }
|
|
|
|
switchIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The netmask of this switch."
|
|
::= { networkSetting 2 }
|
|
|
|
defaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default gateway of this switch."
|
|
::= { networkSetting 3 }
|
|
|
|
enableAutoIpConfig OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enableDHCP(1),enableBOOTP(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the automatic IP address configuration function."
|
|
::= { networkSetting 4 }
|
|
|
|
dnsServer1IpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first DNS server's IP address"
|
|
::= { networkSetting 5 }
|
|
|
|
snmpCommunityName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMP read and trap community name"
|
|
::= { networkSetting 6 }
|
|
|
|
trapServerAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address/Domain name of SNMP trap server"
|
|
::= { networkSetting 7 }
|
|
|
|
dnsServer2IpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second DNS server's IP address"
|
|
::= { networkSetting 8 }
|
|
|
|
portSetting OBJECT IDENTIFIER ::= { etherDeviceSwitch 9 }
|
|
|
|
portTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table."
|
|
::= { portSetting 1 }
|
|
|
|
portEntry OBJECT-TYPE
|
|
SYNTAX PortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port entry."
|
|
INDEX { portIndex }
|
|
::= { portTable 1 }
|
|
|
|
PortEntry ::=
|
|
SEQUENCE {
|
|
portIndex
|
|
INTEGER,
|
|
portEnable
|
|
INTEGER,
|
|
portSpeed
|
|
INTEGER,
|
|
portMDI
|
|
INTEGER,
|
|
portFDXFlowCtrl
|
|
INTEGER,
|
|
portName
|
|
DisplayString,
|
|
portTrunkingGroup
|
|
INTEGER
|
|
}
|
|
|
|
portIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port index."
|
|
::= { portEntry 1 }
|
|
|
|
portEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the port."
|
|
::= { portEntry 2 }
|
|
|
|
portSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(0),
|
|
speed100M-Full(1),
|
|
speed100M-Half(2),
|
|
speed10M-Full(3),
|
|
speed10M-Half(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port speed and duplex."
|
|
::= { portEntry 3 }
|
|
|
|
portMDI OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(0),
|
|
mdiX(1),
|
|
mdi(2),
|
|
no(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port MDI/MDIX."
|
|
::= { portEntry 4 }
|
|
|
|
portFDXFlowCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port FDX Flow Control"
|
|
::= { portEntry 5 }
|
|
|
|
portName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port Name"
|
|
::= { portEntry 6 }
|
|
|
|
portTrunkingGroup OBJECT-TYPE
|
|
SYNTAX INTEGER { none(0), trunkingGroup1(1), trunkingGroup2(2), trunkingGroup3(3), trunkingGroup4(4)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trunking group number which this port belongs to."
|
|
::= { portEntry 7 }
|
|
|
|
monitor OBJECT IDENTIFIER ::= { etherDeviceSwitch 10 }
|
|
|
|
power1InputStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-present(0), present(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the first power input."
|
|
::= { monitor 1 }
|
|
|
|
power2InputStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-present(0), present(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the second power input."
|
|
::= { monitor 2 }
|
|
|
|
monitorPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MonitorPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table of monitor function."
|
|
::= { monitor 3 }
|
|
|
|
monitorPortEntry OBJECT-TYPE
|
|
SYNTAX MonitorPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table entry of monitor function."
|
|
INDEX { monitorPortIndex }
|
|
::= { monitorPortTable 1 }
|
|
|
|
MonitorPortEntry ::=
|
|
SEQUENCE {
|
|
monitorPortIndex
|
|
INTEGER,
|
|
monitorLinkStatus
|
|
INTEGER,
|
|
monitorSpeed
|
|
INTEGER,
|
|
monitorAutoMDI
|
|
INTEGER,
|
|
monitorTraffic
|
|
INTEGER,
|
|
monitorFDXFlowCtrl
|
|
INTEGER
|
|
}
|
|
monitorPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port index of monitor function."
|
|
::= { monitorPortEntry 1 }
|
|
|
|
monitorLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(-1), off(0), on(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port link status."
|
|
::= { monitorPortEntry 2}
|
|
|
|
monitorSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
speed100M-Full(3),
|
|
speed100M-Half(2),
|
|
speed10M-Full(1),
|
|
speed10M-Half(0),
|
|
na(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port speed and duplex status."
|
|
::= { monitorPortEntry 3 }
|
|
|
|
monitorAutoMDI OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mdiX(1),
|
|
mdi(0),
|
|
na(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port MDI/MDIX status."
|
|
::= { monitorPortEntry 4 }
|
|
|
|
monitorTraffic OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trafic loading percentage of port."
|
|
::= { monitorPortEntry 5 }
|
|
monitorFDXFlowCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0),on(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Full-Duplex flow control status"
|
|
::= { monitorPortEntry 6 }
|
|
|
|
monitorDiTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MonitorDiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI table of monitor function."
|
|
::= { monitor 4 }
|
|
|
|
monitorDiEntry OBJECT-TYPE
|
|
SYNTAX MonitorDiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI table entry of monitor function."
|
|
INDEX { diIndex }
|
|
::= { monitorDiTable 1 }
|
|
|
|
MonitorDiEntry ::=
|
|
SEQUENCE {
|
|
diIndex
|
|
INTEGER,
|
|
diInputStatus
|
|
INTEGER
|
|
}
|
|
|
|
diIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI index of monitor function"
|
|
::= { monitorDiEntry 1 }
|
|
|
|
diInputStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI input status."
|
|
::= { monitorDiEntry 2 }
|
|
|
|
|
|
emailWarning OBJECT IDENTIFIER ::= { etherDeviceSwitch 11 }
|
|
emailService OBJECT IDENTIFIER ::= { emailWarning 1 }
|
|
|
|
emailWarningMailServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The email server's Ip Address/Domain name of email warning function."
|
|
::= { emailService 1 }
|
|
|
|
emailWarningFirstEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first email address of email warning function."
|
|
::= { emailService 2 }
|
|
|
|
emailWarningSecondEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second email address of email warning function."
|
|
::= { emailService 3 }
|
|
|
|
emailWarningThirdEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The third email address of email warning function."
|
|
::= { emailService 4 }
|
|
|
|
emailWarningFourthEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fourth email address of email warning function."
|
|
::= { emailService 5 }
|
|
|
|
emailWarningEventType OBJECT IDENTIFIER ::= { emailWarning 2 }
|
|
|
|
emailWarningEventServerColdStart OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch cold start event of email warning function."
|
|
::= { emailWarningEventType 1 }
|
|
|
|
emailWarningEventServerWarmStart OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch warm start event of email warning function."
|
|
::= { emailWarningEventType 2 }
|
|
|
|
emailWarningEventConfigChange OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configuration changed event of email warning function."
|
|
::= { emailWarningEventType 3 }
|
|
|
|
emailWarningEventPowerOn2Off OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power on event of email warning function."
|
|
::= { emailWarningEventType 4 }
|
|
|
|
emailWarningEventPowerOff2On OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power off event of email warning function."
|
|
::= { emailWarningEventType 5 }
|
|
|
|
emailWarningEventAuthFail OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication fail event of email warning function."
|
|
::= { emailWarningEventType 6 }
|
|
|
|
emailWarningEventCommRedundancyTopologyChanged OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The comm. redundancy topology changed event of email warning function."
|
|
::= { emailWarningEventType 7 }
|
|
|
|
emailWarningEventPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EmailWarningEventPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table of the email warning event."
|
|
::= { emailWarning 3 }
|
|
|
|
emailWarningEventPortEntry OBJECT-TYPE
|
|
SYNTAX EmailWarningEventPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table entry of the email warning event."
|
|
INDEX { emailWarningPortIndex }
|
|
::= { emailWarningEventPortTable 1 }
|
|
|
|
EmailWarningEventPortEntry ::=
|
|
SEQUENCE {
|
|
emailWarningPortIndex
|
|
INTEGER,
|
|
emailWarningEventPortLinkOn
|
|
INTEGER,
|
|
emailWarningEventPortLinkOff
|
|
INTEGER,
|
|
emailWarningEventPortTrafficOverload
|
|
INTEGER,
|
|
emailWarningEventPortTrafficThreshold
|
|
INTEGER,
|
|
emailWarningEventPortTrafficDuration
|
|
INTEGER
|
|
}
|
|
emailWarningPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table index of the email warning event."
|
|
::= { emailWarningEventPortEntry 1 }
|
|
|
|
emailWarningEventPortLinkOn OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port link on event of email warning function."
|
|
::= { emailWarningEventPortEntry 2 }
|
|
|
|
emailWarningEventPortLinkOff OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port link off event of email warning function."
|
|
::= { emailWarningEventPortEntry 3 }
|
|
|
|
emailWarningEventPortTrafficOverload OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's traffic overloading event of email warning function."
|
|
::= { emailWarningEventPortEntry 4 }
|
|
|
|
emailWarningEventPortTrafficThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's traffic threshold of the overloading event."
|
|
::= { emailWarningEventPortEntry 5 }
|
|
|
|
emailWarningEventPortTrafficDuration OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's traffic duration of the overloading event."
|
|
::= { emailWarningEventPortEntry 6 }
|
|
|
|
emailWarningEventDiTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EmailWarningEventDiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI table of the email warning event."
|
|
::= { emailWarning 4 }
|
|
|
|
emailWarningEventDiEntry OBJECT-TYPE
|
|
SYNTAX EmailWarningEventDiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI table entry of the email warning event."
|
|
INDEX { diIndex }
|
|
::= { emailWarningEventDiTable 1 }
|
|
|
|
EmailWarningEventDiEntry ::=
|
|
SEQUENCE {
|
|
emailWarningEventDiInputOn2Off
|
|
INTEGER,
|
|
emailWarningEventDiInputOff2On
|
|
INTEGER
|
|
}
|
|
|
|
emailWarningEventDiInputOn2Off OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI input off event of email warning function ."
|
|
::= { emailWarningEventDiEntry 1 }
|
|
|
|
emailWarningEventDiInputOff2On OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DI input on event of email warning function."
|
|
::= { emailWarningEventDiEntry 2 }
|
|
|
|
setDeviceIp OBJECT IDENTIFIER ::= { etherDeviceSwitch 12 }
|
|
|
|
setDevIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SetDevIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set devvice IP table."
|
|
::= { setDeviceIp 1 }
|
|
|
|
setDevIpEntry OBJECT-TYPE
|
|
SYNTAX SetDevIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set devvice IP table entry."
|
|
INDEX { setDevIpIndex }
|
|
::= { setDevIpTable 1 }
|
|
|
|
SetDevIpEntry ::=
|
|
SEQUENCE {
|
|
setDevIpIndex
|
|
INTEGER,
|
|
setDevIpCurrentIpofDevice
|
|
DisplayString,
|
|
setDevIpPresentBy
|
|
INTEGER,
|
|
setDevIpDedicatedIp
|
|
IpAddress
|
|
}
|
|
setDevIpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..12)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set devvice IP index."
|
|
::= { setDevIpEntry 1 }
|
|
|
|
setDevIpCurrentIpofDevice OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current IP address of connected to this port."
|
|
::= { setDevIpEntry 2 }
|
|
|
|
setDevIpPresentBy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no(0),
|
|
dhcpClient(1),
|
|
rarp(2),
|
|
bootp(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol used that assigning IP to the device."
|
|
::= { setDevIpEntry 3 }
|
|
|
|
setDevIpDedicatedIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address when assign to the device connected to this port."
|
|
::= { setDevIpEntry 4 }
|
|
|
|
mirroring OBJECT IDENTIFIER ::= { etherDeviceSwitch 13 }
|
|
|
|
targetPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mirrored port of mirroring function."
|
|
::= { mirroring 1 }
|
|
|
|
mirroringPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mirroring port of mirroring function."
|
|
::= { mirroring 2 }
|
|
|
|
monitorDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
outputDataStream(1),
|
|
biDirectional(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The traffic direction of mirroring function."
|
|
::= { mirroring 3 }
|
|
|
|
|
|
commRedundancy OBJECT IDENTIFIER ::= { etherDeviceSwitch 16 }
|
|
|
|
|
|
protocolOfRedundancySetup OBJECT-TYPE
|
|
SYNTAX INTEGER { spanningTree(1), turboRing(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This set the redundancy protocol of this switch. "
|
|
::= { commRedundancy 1 }
|
|
|
|
turboRing OBJECT IDENTIFIER ::= { commRedundancy 2}
|
|
|
|
turboRingMaster OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is this a Master or Slave."
|
|
::= { turboRing 1 }
|
|
|
|
turboRingMasterSetup OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this to be Master."
|
|
::= { turboRing 2 }
|
|
|
|
turboRingPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TurboRingPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Ring Port Table."
|
|
::= { turboRing 3 }
|
|
|
|
turboRingPortEntry OBJECT-TYPE
|
|
SYNTAX TurboRingPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Ring Port Entry."
|
|
INDEX { turboRingPortIndex }
|
|
::= { turboRingPortTable 1 }
|
|
|
|
TurboRingPortEntry ::=
|
|
SEQUENCE {
|
|
turboRingPortIndex
|
|
INTEGER,
|
|
turboRingPortStatus
|
|
INTEGER,
|
|
turboRingPortDesignatedBridge
|
|
OCTET STRING,
|
|
turboRingPortDesignatedPort
|
|
INTEGER
|
|
}
|
|
turboRingPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Ring Port Index."
|
|
::= { turboRingPortEntry 1 }
|
|
|
|
turboRingPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
portDisabled(0),
|
|
notTurboRingPort(1),
|
|
linkDown(2),
|
|
blocked(3),
|
|
learning(4),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Ring Port Status."
|
|
::= { turboRingPortEntry 2 }
|
|
|
|
turboRingPortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC address of the bridge which this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
::= { turboRingPortEntry 3 }
|
|
|
|
turboRingPortDesignatedPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Port Number of the port on the Designated
|
|
Bridge for this port's segment."
|
|
::= { turboRingPortEntry 4 }
|
|
|
|
turboRingDesignatedMaster OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC address of the bridge which is the Master of the TURBO RING."
|
|
::= { turboRing 6 }
|
|
|
|
turboRingRdntPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER(1..8)
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of 1st Redundant Port on the TURBO RING."
|
|
::= { turboRing 7 }
|
|
|
|
turboRingRdntPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER(1..8)
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of 2nd Redundant Port on the TURBO RING."
|
|
::= { turboRing 8 }
|
|
|
|
turboRingEnableCoupling OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the ring coupling function."
|
|
::= { turboRing 9 }
|
|
|
|
turboRingCouplingPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..12)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The coupling port of ring coupling function."
|
|
::= { turboRing 10 }
|
|
|
|
turboRingCouplingPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
portDisabled(0),
|
|
notCouplingPort(1),
|
|
linkDown(2),
|
|
blocked(3),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The coupling port status of ring coupling function."
|
|
::= { turboRing 11 }
|
|
|
|
turboRingControlPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..12)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control port of ring coupling function."
|
|
::= { turboRing 12 }
|
|
|
|
turboRingControlPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
portDisabled(0),
|
|
notControlPort(1),
|
|
linkDown(2),
|
|
blocked(3),
|
|
forwarding(5),
|
|
inactive(6),
|
|
active(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control port status of ring coupling function."
|
|
::= { turboRing 13 }
|
|
|
|
turboRingBrokenStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
na(0),
|
|
normal(1),
|
|
broken(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turbo Ring broken display."
|
|
::= { turboRing 14 }
|
|
|
|
spanningTree OBJECT IDENTIFIER ::= { commRedundancy 3 }
|
|
|
|
spanningTreeRoot OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The root of spanning tree."
|
|
::= { spanningTree 1 }
|
|
|
|
spanningTreeBridgePriority OBJECT-TYPE
|
|
SYNTAX INTEGER {priority0(0), priority4096(4096), priority8192(8192), priority12288(12288),
|
|
priority16384(16384), priority20480(20480), priority24576(24576),
|
|
priority28672(28672), priority32768(32768), priority36864(36864),
|
|
priority40960(40960), priority45056(45056), priority49152(49152),
|
|
priority53248(53248), priority57344(57344), priority61440(61440)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bridge priority of spanning tree protocol."
|
|
::= { spanningTree 2 }
|
|
|
|
spanningTreeHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hello time of spanning tree protocol."
|
|
::= { spanningTree 3 }
|
|
|
|
spanningTreeMaxAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max. age of spanning tree protocol."
|
|
::= { spanningTree 4 }
|
|
|
|
spanningTreeForwardingDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tje forwarding delay of spanning tree protocol."
|
|
::= { spanningTree 5 }
|
|
|
|
spanningTreeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SpanningTreeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The spanning tree table."
|
|
::= { spanningTree 6 }
|
|
|
|
spanningTreeEntry OBJECT-TYPE
|
|
SYNTAX SpanningTreeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The spanning tree port entry."
|
|
INDEX { spanningTreeIndex }
|
|
::= { spanningTreeTable 1 }
|
|
|
|
SpanningTreeEntry ::=
|
|
SEQUENCE {
|
|
spanningTreeIndex
|
|
INTEGER,
|
|
enableSpanningTree
|
|
INTEGER,
|
|
spanningTreePortPriority
|
|
INTEGER,
|
|
spanningTreePortCost
|
|
INTEGER,
|
|
spanningTreePortStatus
|
|
INTEGER
|
|
}
|
|
spanningTreeIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..12)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of spanning tree table."
|
|
::= { spanningTreeEntry 1 }
|
|
enableSpanningTree OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable of spanning tree protocol for this port."
|
|
::= { spanningTreeEntry 2 }
|
|
|
|
spanningTreePortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {priority0(0), priority16(16), priority32(32), priority48(48),
|
|
priority64(64), priority80(80), priority96(96), priority112(112),
|
|
priority128(128), priority144(144), priority160(160), priority176(176),
|
|
priority192(192), priority208(208), priority224(224), priority240(240)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port priority of spanning tree protocol."
|
|
::= { spanningTreeEntry 3 }
|
|
|
|
spanningTreePortCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port cost of spanning tree protocol."
|
|
::= { spanningTreeEntry 4 }
|
|
|
|
spanningTreePortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
portDisabled(0),
|
|
notSpanningTreePort(1),
|
|
linkDown(2),
|
|
blocked(3),
|
|
learning(4),
|
|
forwarding(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port status of spanning tree protocol."
|
|
::= { spanningTreeEntry 5 }
|
|
|
|
activeProtocolOfRedundancy OBJECT-TYPE
|
|
SYNTAX INTEGER { none(0), spanningTree(1), turboRing(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This shows the active redundancy protocol of this switch now. The none(0) stauts will
|
|
be showed if only if the switch's redundancy protocol is set to spanning tree and none of
|
|
ports enable spanning tree."
|
|
::= { commRedundancy 4 }
|
|
|
|
relayWarning OBJECT IDENTIFIER ::= { etherDeviceSwitch 17 }
|
|
|
|
relayWarningTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay warning table."
|
|
::= { relayWarning 11 }
|
|
|
|
relayWarningEntry OBJECT-TYPE
|
|
SYNTAX RelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Relay Warning Entry."
|
|
INDEX { relayAlarmIndex }
|
|
::= { relayWarningTable 1 }
|
|
|
|
RelayWarningEntry ::=
|
|
SEQUENCE {
|
|
relayAlarmIndex
|
|
INTEGER,
|
|
relayWarningRelayContact
|
|
INTEGER,
|
|
overrideRelayWarningSetting
|
|
INTEGER,
|
|
relayWarningPower1Off
|
|
INTEGER,
|
|
relayWarningPower1OffStatus
|
|
INTEGER,
|
|
relayWarningPower2Off
|
|
INTEGER,
|
|
relayWarningPower2OffStatus
|
|
INTEGER
|
|
}
|
|
|
|
relayAlarmIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Relay alarm index."
|
|
::= { relayWarningEntry 1 }
|
|
|
|
relayWarningRelayContact OBJECT-TYPE
|
|
SYNTAX INTEGER {closed(0) ,opened(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first Relay contact status."
|
|
::= { relayWarningEntry 2 }
|
|
|
|
|
|
overrideRelayWarningSetting OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Override the relay warning setting."
|
|
::= { relayWarningEntry 3 }
|
|
|
|
relayWarningPower1Off OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact will be opened while the first power input off."
|
|
::= { relayWarningEntry 4 }
|
|
|
|
relayWarningPower1OffStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-triggered(0), triggered(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact is opened as the first power input off.."
|
|
::= { relayWarningEntry 5 }
|
|
|
|
relayWarningPower2Off OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact will be opened while the second power input off."
|
|
::= { relayWarningEntry 6 }
|
|
|
|
relayWarningPower2OffStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-triggered(0), triggered(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact is opened as the second power input off."
|
|
::= { relayWarningEntry 7 }
|
|
|
|
|
|
portRelayWarningTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortRelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay warning port table."
|
|
::= { relayWarning 12 }
|
|
|
|
portRelayWarningEntry OBJECT-TYPE
|
|
SYNTAX PortRelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Relay Warning Entry."
|
|
INDEX { portIndex,relayAlarmIndex }
|
|
::= { portRelayWarningTable 1 }
|
|
|
|
PortRelayWarningEntry ::=
|
|
SEQUENCE {
|
|
relayWarningLinkChanged
|
|
INTEGER,
|
|
relayWarningLinkChangedStatus
|
|
INTEGER,
|
|
relayWarningTrafficOverload
|
|
INTEGER,
|
|
relayWarningTrafficOverloadStatus
|
|
INTEGER,
|
|
relayWarningTrafficThreshold
|
|
INTEGER,
|
|
relayWarningTrafficDuration
|
|
INTEGER
|
|
}
|
|
|
|
relayWarningLinkChanged OBJECT-TYPE
|
|
SYNTAX INTEGER { ignore(0), on2off(1), off2on(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact will be opened while this port's link status is changed."
|
|
::= { portRelayWarningEntry 1 }
|
|
|
|
relayWarningLinkChangedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-triggered(0), triggered(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact is opened as this port's link status is changed."
|
|
::= { portRelayWarningEntry 2 }
|
|
|
|
relayWarningTrafficOverload OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact will be opened while this port's traffic is overload."
|
|
::= { portRelayWarningEntry 3 }
|
|
|
|
relayWarningTrafficOverloadStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-triggered(0), triggered(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact is opened as this port's traffic is overload."
|
|
::= { portRelayWarningEntry 4 }
|
|
|
|
relayWarningTrafficThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold of the port traffic will be over loading."
|
|
::= { portRelayWarningEntry 5 }
|
|
|
|
relayWarningTrafficDuration OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The duration of the port traffic will be over loading."
|
|
::= { portRelayWarningEntry 6 }
|
|
|
|
diRelayWarningTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DiRelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay warning DI table."
|
|
::= { relayWarning 13 }
|
|
|
|
diRelayWarningEntry OBJECT-TYPE
|
|
SYNTAX DiRelayWarningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DI Relay Warning Entry."
|
|
INDEX { diIndex,relayAlarmIndex }
|
|
::= { diRelayWarningTable 1 }
|
|
|
|
DiRelayWarningEntry ::=
|
|
SEQUENCE {
|
|
relayWarningDiInputChanged
|
|
INTEGER,
|
|
relayWarningDiInputChangedStatus
|
|
INTEGER
|
|
|
|
}
|
|
|
|
|
|
relayWarningDiInputChanged OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), off(1), on(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact will be opened while the DI input changed."
|
|
::= { diRelayWarningEntry 1 }
|
|
|
|
relayWarningDiInputChangedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { not-triggered(0), triggered(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The relay contact is opened as the first DI input changed.."
|
|
::= { diRelayWarningEntry 2 }
|
|
|
|
|
|
trafficPrioritization OBJECT IDENTIFIER ::= { etherDeviceSwitch 18 }
|
|
|
|
qosClassification OBJECT IDENTIFIER ::= { trafficPrioritization 1 }
|
|
queuingMechanism OBJECT-TYPE
|
|
SYNTAX INTEGER {schedweightfair(0),schedstrict(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queuing mechanism."
|
|
::= { qosClassification 1 }
|
|
|
|
qosPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The QOS port table."
|
|
::= { qosClassification 2 }
|
|
|
|
qosPortEntry OBJECT-TYPE
|
|
SYNTAX QosPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The QOS Port Entry."
|
|
INDEX { portIndex }
|
|
::= { qosPortTable 1 }
|
|
|
|
QosPortEntry ::=
|
|
SEQUENCE {
|
|
inspectTos
|
|
INTEGER,
|
|
inspectCos
|
|
INTEGER,
|
|
defaultPriority
|
|
INTEGER
|
|
}
|
|
|
|
inspectTos OBJECT-TYPE
|
|
SYNTAX INTEGER {no (0),yes(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the inspection of TOS field."
|
|
::= { qosPortEntry 1 }
|
|
|
|
inspectCos OBJECT-TYPE
|
|
SYNTAX INTEGER {no (0),yes(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the inspection of COS field."
|
|
::= { qosPortEntry 2 }
|
|
|
|
defaultPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {low(0),normal(1),medium(2),high(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The deault priority of the port."
|
|
::= { qosPortEntry 3 }
|
|
|
|
cosMapping OBJECT IDENTIFIER ::= { trafficPrioritization 2 }
|
|
cosMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CosMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The COS mapping table."
|
|
::= { cosMapping 1 }
|
|
|
|
cosMappingEntry OBJECT-TYPE
|
|
SYNTAX CosMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The COS mapping Entry."
|
|
INDEX { cosTag}
|
|
::= { cosMappingTable 1 }
|
|
|
|
CosMappingEntry ::=
|
|
SEQUENCE {
|
|
cosTag
|
|
INTEGER,
|
|
cosMappedPriority
|
|
INTEGER
|
|
}
|
|
|
|
cosTag OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cos tag of TOS field."
|
|
::= { cosMappingEntry 1 }
|
|
|
|
cosMappedPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {low(0),normal(1),medium(2),high(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frame's priority corresponding to it's COS tag value."
|
|
::= { cosMappingEntry 2 }
|
|
|
|
tosMapping OBJECT IDENTIFIER ::= { trafficPrioritization 3 }
|
|
tosMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TosMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TOS mapping table."
|
|
::= { tosMapping 1 }
|
|
|
|
tosMappingEntry OBJECT-TYPE
|
|
SYNTAX TosMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TOS mapping Entry."
|
|
INDEX { tosClass }
|
|
::= { tosMappingTable 1 }
|
|
|
|
TosMappingEntry ::=
|
|
SEQUENCE {
|
|
tosClass
|
|
INTEGER,
|
|
tosMappedPriority
|
|
INTEGER
|
|
}
|
|
|
|
tosClass OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TOS class of TOS field."
|
|
::= { tosMappingEntry 1 }
|
|
|
|
tosMappedPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {low(0),normal(1),medium(2),high(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frame's priority corresponding to it's TOS class value."
|
|
::= { tosMappingEntry 2 }
|
|
|
|
|
|
vlan OBJECT IDENTIFIER ::= { etherDeviceSwitch 19 }
|
|
vlanPortSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanPortSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The valn seting table of ports."
|
|
::= { vlan 1 }
|
|
|
|
vlanPortSettingEntry OBJECT-TYPE
|
|
SYNTAX VlanPortSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Setting Entry of VLAN."
|
|
INDEX { portIndex }
|
|
::= { vlanPortSettingTable 1 }
|
|
|
|
VlanPortSettingEntry ::=
|
|
SEQUENCE {
|
|
portVlanType
|
|
INTEGER,
|
|
portDefaultVid
|
|
INTEGER,
|
|
portFixedVid
|
|
DisplayString,
|
|
portForbiddenVid
|
|
DisplayString
|
|
}
|
|
|
|
portVlanType OBJECT-TYPE
|
|
SYNTAX INTEGER {access(0),trunk(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan type of port."
|
|
::= { vlanPortSettingEntry 1 }
|
|
|
|
portDefaultVid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PVID of port."
|
|
::= { vlanPortSettingEntry 2 }
|
|
|
|
portFixedVid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fixed vids of (trunk) port."
|
|
::= { vlanPortSettingEntry 3 }
|
|
|
|
portForbiddenVid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The forbidden vids of (trunk)port."
|
|
::= { vlanPortSettingEntry 4 }
|
|
|
|
|
|
vlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN table."
|
|
::= { vlan 2 }
|
|
|
|
vlanEntry OBJECT-TYPE
|
|
SYNTAX VlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Entry."
|
|
INDEX { vlanId }
|
|
::= { vlanTable 1 }
|
|
|
|
VlanEntry ::=
|
|
SEQUENCE {
|
|
vlanId
|
|
INTEGER,
|
|
joinedAccessPorts
|
|
OCTET STRING,
|
|
joinedTrunkPorts
|
|
OCTET STRING
|
|
}
|
|
|
|
vlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN id."
|
|
::= { vlanEntry 1 }
|
|
|
|
joinedAccessPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The access ports that joined this VID."
|
|
::= { vlanEntry 2 }
|
|
|
|
joinedTrunkPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trunk ports that joined this VID."
|
|
::= { vlanEntry 3 }
|
|
|
|
portVidSetTable OBJECT IDENTIFIER ::= { vlan 3 }
|
|
|
|
port1DefaultVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 1 VLAN id."
|
|
::= { portVidSetTable 1 }
|
|
|
|
port2DefaultVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 2 VLAN id."
|
|
::= { portVidSetTable 2 }
|
|
|
|
port3DefaultVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 3 VLAN id."
|
|
::= { portVidSetTable 3 }
|
|
|
|
port4DefaultVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 4 VLAN id."
|
|
::= { portVidSetTable 4 }
|
|
|
|
port5DefaultVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 5 VLAN id."
|
|
::= { portVidSetTable 5 }
|
|
|
|
port6DefaultVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 6 VLAN id."
|
|
::= { portVidSetTable 6 }
|
|
|
|
port7DefaultVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 7 VLAN id."
|
|
::= { portVidSetTable 7 }
|
|
|
|
port8DefaultVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 8 VLAN id."
|
|
::= { portVidSetTable 8 }
|
|
|
|
managementVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management VLAN id."
|
|
::= { portVidSetTable 9 }
|
|
|
|
pvidsAction OBJECT-TYPE
|
|
SYNTAX INTEGER {normal(0), activate(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"activate default vid of all ports if set to activate(1)."
|
|
::= { portVidSetTable 10 }
|
|
|
|
multicastFiltering OBJECT IDENTIFIER ::= { etherDeviceSwitch 20 }
|
|
igmpSnooping OBJECT IDENTIFIER ::= { multicastFiltering 1 }
|
|
|
|
querierQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This query interval of the querier function for this VLAN."
|
|
::= { igmpSnooping 1 }
|
|
|
|
igmpSnoopingSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpSnoopingSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP snooping setting table."
|
|
::= { igmpSnooping 2 }
|
|
|
|
igmpSnoopingSettingEntry OBJECT-TYPE
|
|
SYNTAX IgmpSnoopingSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP snooping setting Entry."
|
|
INDEX { vlanId }
|
|
::= { igmpSnoopingSettingTable 1 }
|
|
|
|
IgmpSnoopingSettingEntry ::=
|
|
SEQUENCE {
|
|
enableIgmpSnooping
|
|
INTEGER,
|
|
enableQuerier
|
|
INTEGER,
|
|
fixedMulticastRouterPorts
|
|
OCTET STRING,
|
|
learnedMulticastRouterPorts
|
|
OCTET STRING
|
|
}
|
|
|
|
enableIgmpSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the IGMP snooping functon in this VLAN."
|
|
::= { igmpSnoopingSettingEntry 1 }
|
|
|
|
enableQuerier OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the querier function for this VLAN."
|
|
::= { igmpSnoopingSettingEntry 2 }
|
|
|
|
fixedMulticastRouterPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ports that multicast-rouer exist."
|
|
::= { igmpSnoopingSettingEntry 3 }
|
|
|
|
learnedMulticastRouterPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ports that multicast-rouer exist."
|
|
::= { igmpSnoopingSettingEntry 4 }
|
|
|
|
igmpSnoopingMulticastGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgmpSnoopingMulticastGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast group table by IGMP snooping function."
|
|
::= { igmpSnooping 3 }
|
|
|
|
igmpSnoopingMulticastGroupEntry OBJECT-TYPE
|
|
SYNTAX IgmpSnoopingMulticastGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast group entry by IGMP snooping function."
|
|
INDEX { vlanId,igmpSnoopingIpGroup }
|
|
::= { igmpSnoopingMulticastGroupTable 1 }
|
|
|
|
IgmpSnoopingMulticastGroupEntry ::=
|
|
SEQUENCE {
|
|
igmpSnoopingIpGroup
|
|
IpAddress,
|
|
igmpSnoopingMacGroup
|
|
OCTET STRING,
|
|
igmpSnoopingJoinedPorts
|
|
OCTET STRING
|
|
}
|
|
|
|
igmpSnoopingIpGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast IP group by IGMP snooping function."
|
|
::= { igmpSnoopingMulticastGroupEntry 1 }
|
|
|
|
igmpSnoopingMacGroup OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast MAC group by IGMP snooping function."
|
|
::= { igmpSnoopingMulticastGroupEntry 2 }
|
|
|
|
igmpSnoopingJoinedPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ports that joined this multicast group."
|
|
::= { igmpSnoopingMulticastGroupEntry 3 }
|
|
|
|
enableGlobalIgmpSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0),enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the IGMP snooping functon ."
|
|
::= { igmpSnooping 4 }
|
|
|
|
staticMulticast OBJECT IDENTIFIER ::= { multicastFiltering 2 }
|
|
staticMulticastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StaticMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The static multicast table."
|
|
::= { staticMulticast 1 }
|
|
|
|
staticMulticastEntry OBJECT-TYPE
|
|
SYNTAX StaticMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static multicast Entry."
|
|
INDEX { staticMulticastAddress }
|
|
::= { staticMulticastTable 1 }
|
|
|
|
StaticMulticastEntry ::=
|
|
SEQUENCE {
|
|
staticMulticastAddress
|
|
OCTET STRING,
|
|
staticMulticastPortMask
|
|
OCTET STRING,
|
|
staticMulticastStatus
|
|
INTEGER
|
|
}
|
|
|
|
staticMulticastAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (6))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The static multicast address."
|
|
::= { staticMulticastEntry 1 }
|
|
|
|
staticMulticastPortMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port map of the static multicast address."
|
|
::= { staticMulticastEntry 2 }
|
|
|
|
staticMulticastStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status is active to indicate normal.
|
|
Use createAndGo to create new on multiple SET.
|
|
Use createAndWait to create new on one SET all then actvie.
|
|
Use destroy to delete this row."
|
|
::= { staticMulticastEntry 3 }
|
|
|
|
rateLimiting OBJECT IDENTIFIER ::= { etherDeviceSwitch 21 }
|
|
rateLimitingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RateLimitingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate limiting table."
|
|
::= { rateLimiting 1 }
|
|
|
|
rateLimitingEntry OBJECT-TYPE
|
|
SYNTAX RateLimitingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate limiting Entry."
|
|
INDEX { portIndex }
|
|
::= { rateLimitingTable 1 }
|
|
|
|
RateLimitingEntry ::=
|
|
SEQUENCE {
|
|
ingressLimitMode
|
|
INTEGER,
|
|
ingressLowPriLimitRate
|
|
INTEGER,
|
|
ingressNormalPriLimitRate
|
|
INTEGER,
|
|
ingressMediumPriLimitRate
|
|
INTEGER,
|
|
ingressHighPriLimitRate
|
|
INTEGER,
|
|
egressLimitRate
|
|
INTEGER
|
|
}
|
|
|
|
ingressLimitMode OBJECT-TYPE
|
|
SYNTAX INTEGER {all(0),bmucast(1),bmcast(2),bcast(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress limit mode."
|
|
::= { rateLimitingEntry 1 }
|
|
|
|
ingressLowPriLimitRate OBJECT-TYPE
|
|
SYNTAX INTEGER {notlimit(0),limit128k(1),limit256k(2),limit512k(3),
|
|
limit1M(4),limit2M(5),limit4M(6),limit8M(7)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress limiting rate of low priority queue."
|
|
::= { rateLimitingEntry 2 }
|
|
|
|
ingressNormalPriLimitRate OBJECT-TYPE
|
|
SYNTAX INTEGER {notlimit(0),limit128k(1),limit256k(2),limit512k(3),
|
|
limit1M(4),limit2M(5),limit4M(6),limit8M(7),
|
|
limit16M(8)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress limiting rate of normal priority queue.
|
|
The values being equal to or double value of ingressLowPriLimitRate are valid for set."
|
|
::= { rateLimitingEntry 3 }
|
|
|
|
ingressMediumPriLimitRate OBJECT-TYPE
|
|
SYNTAX INTEGER {notlimit(0),limit128k(1),limit256k(2),limit512k(3),
|
|
limit1M(4),limit2M(5),limit4M(6),limit8M(7),
|
|
limit16M(8),limit32M(9)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress limiting rate of medium priority queue.
|
|
The values being equal to or double value of ingressNormalPriLimitRate are valid for set."
|
|
::= { rateLimitingEntry 4 }
|
|
|
|
ingressHighPriLimitRate OBJECT-TYPE
|
|
SYNTAX INTEGER {notlimit(0),limit128k(1),limit256k(2),limit512k(3),
|
|
limit1M(4),limit2M(5),limit4M(6),limit8M(7),
|
|
limit16M(8),limit32M(9),limit64M(10)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ingress limiting rate of high priority queue.
|
|
The values being equal to or double value of ingressMediumPriLimitRate are valid for set."
|
|
::= { rateLimitingEntry 5 }
|
|
|
|
egressLimitRate OBJECT-TYPE
|
|
SYNTAX INTEGER {notlimit(0),limit128k(1),limit256k(2),limit512k(3),
|
|
limit1M(4),limit2M(5),limit4M(6),limit8M(7)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The egress limiting rate."
|
|
::= { rateLimitingEntry 6 }
|
|
|
|
portLock OBJECT IDENTIFIER ::= { etherDeviceSwitch 22 }
|
|
portLockTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortLockEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port lock table."
|
|
::= { portLock 1 }
|
|
|
|
portLockEntry OBJECT-TYPE
|
|
SYNTAX PortLockEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Lock Entry."
|
|
INDEX { portIndex }
|
|
::= { portLockTable 1 }
|
|
|
|
PortLockEntry ::=
|
|
SEQUENCE {
|
|
enablePortLock
|
|
INTEGER
|
|
}
|
|
|
|
enablePortLock OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enable the port lock."
|
|
::= { portLockEntry 1 }
|
|
|
|
staticUnicastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StaticUnicastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The static unicast table."
|
|
::= { portLock 2 }
|
|
|
|
staticUnicastEntry OBJECT-TYPE
|
|
SYNTAX StaticUnicastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static unicast Entry."
|
|
INDEX { staticUnicastAddress }
|
|
::= { staticUnicastTable 1 }
|
|
|
|
StaticUnicastEntry ::=
|
|
SEQUENCE {
|
|
staticUnicastAddress
|
|
OCTET STRING,
|
|
staticUnicastPort
|
|
INTEGER,
|
|
staticUnicastPriority
|
|
INTEGER,
|
|
staticUnicastStatus
|
|
INTEGER
|
|
}
|
|
|
|
staticUnicastAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (6))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The static unicast address."
|
|
::= { staticUnicastEntry 1 }
|
|
|
|
staticUnicastPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port of the static unicast address."
|
|
::= { staticUnicastEntry 2 }
|
|
|
|
staticUnicastPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {low(0),normal(1),medium(2),high(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of the static unicast address."
|
|
::= { staticUnicastEntry 3 }
|
|
|
|
staticUnicastStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status is active to indicate normal.
|
|
Use createAndGo to create new on multiple SET.
|
|
Use createAndWait to create new on one SET all then actvie.
|
|
Use destroy to delete this row."
|
|
::= { staticUnicastEntry 4 }
|
|
|
|
accessibleIP OBJECT IDENTIFIER ::= { etherDeviceSwitch 30 }
|
|
|
|
enableAccessibleIP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the accessible IP address list."
|
|
::= { accessibleIP 1 }
|
|
|
|
accessibleIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessibleIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"accessibleIP."
|
|
::= { accessibleIP 2 }
|
|
|
|
accessibleIpEntry OBJECT-TYPE
|
|
SYNTAX AccessibleIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accessible IP address entry."
|
|
INDEX { accessibleIpAddress }
|
|
::= { accessibleIpTable 1 }
|
|
|
|
AccessibleIpEntry ::=
|
|
SEQUENCE {
|
|
accessibleIpAddress
|
|
IpAddress,
|
|
accessibleIpNetMask
|
|
IpAddress,
|
|
aIpStatus
|
|
INTEGER
|
|
}
|
|
|
|
accessibleIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accessible IP address"
|
|
::= { accessibleIpEntry 1 }
|
|
|
|
accessibleIpNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accessible IP netmask."
|
|
::= { accessibleIpEntry 2 }
|
|
|
|
aIpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status is active to indicate normal.
|
|
Use createAndGo to create new on multiple SET.
|
|
Use createAndWait to create new on one SET all then actvie.
|
|
Use destroy to delete this row."
|
|
::= { accessibleIpEntry 3 }
|
|
|
|
sysFileUpdate OBJECT IDENTIFIER ::= { etherDeviceSwitch 31 }
|
|
tftpServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TFTP Server name(IP Address)"
|
|
::= { sysFileUpdate 1 }
|
|
|
|
firmwarePathName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path name of firmware file in the TFTP Server"
|
|
::= { sysFileUpdate 2 }
|
|
|
|
logPathName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path name of log file in the TFTP Server"
|
|
::= { sysFileUpdate 3 }
|
|
|
|
confPathName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path name of configuration file in the TFTP Server"
|
|
::= { sysFileUpdate 4 }
|
|
|
|
timeSetting OBJECT IDENTIFIER ::= { etherDeviceSwitch 32 }
|
|
sysDateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date time of system"
|
|
::= { timeSetting 1 }
|
|
|
|
calibratePeriod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The period (seconds) that calibrate with time server"
|
|
::= { timeSetting 2 }
|
|
|
|
timeServer1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first time server"
|
|
::= { timeSetting 3 }
|
|
|
|
timeServer2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second time server"
|
|
::= { timeSetting 4 }
|
|
|
|
|
|
|
|
-- definition of enterprise traps.
|
|
|
|
configChangeTrap TRAP-TYPE
|
|
ENTERPRISE etherDeviceSwitch
|
|
DESCRIPTION
|
|
"The configuration has been changed."
|
|
::= 10
|
|
powerOn2OffTrap TRAP-TYPE
|
|
ENTERPRISE etherDeviceSwitch
|
|
DESCRIPTION
|
|
"The power input fail."
|
|
::= 11
|
|
powerOff2OnTrap TRAP-TYPE
|
|
ENTERPRISE etherDeviceSwitch
|
|
DESCRIPTION
|
|
"The power input ok."
|
|
::= 12
|
|
trafficOverloadTrap TRAP-TYPE
|
|
ENTERPRISE etherDeviceSwitch
|
|
DESCRIPTION
|
|
"The ethernet port's traffic loading exceeds the pre-defined value."
|
|
::= 13
|
|
redundancyTopologyChangedTrap TRAP-TYPE
|
|
ENTERPRISE etherDeviceSwitch
|
|
DESCRIPTION
|
|
"The redundancy topology has been changed."
|
|
::= 14
|
|
|
|
turboRingCouplingPortChangedTrap TRAP-TYPE
|
|
ENTERPRISE etherDeviceSwitch
|
|
DESCRIPTION
|
|
"The coupling path of Turbo Ring has been changed."
|
|
::= 15
|
|
|
|
turboRingMasterChangedTrap TRAP-TYPE
|
|
ENTERPRISE etherDeviceSwitch
|
|
DESCRIPTION
|
|
"The master of Turbo Ring has been changed."
|
|
::= 16
|
|
|
|
|
|
END
|
|
|