Observium_CE/mibs/mitel/MITEL-IPVIRTUAL-MIB

244 lines
8.6 KiB
Plaintext

-- Copyright 1999 MITEL Corporation
-- All rights reserved.
-- This MITEL SNMP Management Information Base Specification
-- (Specification) embodies MITEL's confidential and
-- proprietary intellectual property. MITEL retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS", and MITEL makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
MITEL-IPVIRTUAL-MIB
DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, enterprises,
Integer32, Counter32, IpAddress
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC;
mitelIpGrpIpVirtualGroup MODULE-IDENTITY
LAST-UPDATED "200303240931Z"
ORGANIZATION "MITEL Corporation"
CONTACT-INFO "Standards Group,
Postal: MITEL Corporation
350 Legget Drive, PO Box 13089
Kanata, Ontario
Canada K2K 1X3
Tel: +1 613 592 2122
Fax: +1 613 592 4784
E-mail: std@mitel.com"
DESCRIPTION "The MITEL IP MIB module."
REVISION "200303240931Z"
DESCRIPTION "Convert to SMIv2"
REVISION "199903010000Z"
DESCRIPTION "IP MIB Version 1.0"
::= { mitelRouterIpGroup 4 }
mitel OBJECT IDENTIFIER ::= { enterprises 1027}
mitelProprietary OBJECT IDENTIFIER ::= { mitel 4}
mitelPropIpNetworking OBJECT IDENTIFIER ::= { mitelProprietary 8 }
mitelIpNetRouter OBJECT IDENTIFIER ::= { mitelPropIpNetworking 1 }
mitelRouterIpGroup OBJECT IDENTIFIER ::= { mitelIpNetRouter 1}
--
--
-- The IP Virtual Port Configuration Table.
--
mitelIpVGrpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MitelIpVGrpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to display and configure IP virtual
port information. Each logical LAN destination may have
one or more IP virtuals."
::= { mitelIpGrpIpVirtualGroup 1 }
mitelIpVGrpPortEntry OBJECT-TYPE
SYNTAX MitelIpVGrpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table contains configuration
information specific to a single IP interface."
INDEX { mitelIpVGrpPortTableNetAddr , mitelIpVGrpPortTableIfIndex }
::= { mitelIpVGrpPortTable 1 }
MitelIpVGrpPortEntry ::=
SEQUENCE {
mitelIpVGrpPortTableNetAddr
IpAddress,
mitelIpVGrpPortTableNetMask
IpAddress,
mitelIpVGrpPortTableIfIndex
Integer32,
mitelIpVGrpPortTableStatus
RowStatus,
mitelIpVGrpPortTableCfgMethod
INTEGER
}
mitelIpVGrpPortTableNetAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address that uniquely identifies this entry."
::= { mitelIpVGrpPortEntry 1 }
mitelIpVGrpPortTableNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask assigned to this entry."
::= { mitelIpVGrpPortEntry 2 }
mitelIpVGrpPortTableIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface that this virtual is associated
with."
::= { mitelIpVGrpPortEntry 11 }
mitelIpVGrpPortTableStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The current status of this entry."
REFERENCE
"Textual Conventions for Version 2 of the
Simple Network Management Protocol (RFC 1443)."
::= { mitelIpVGrpPortEntry 12 }
mitelIpVGrpPortTableCfgMethod OBJECT-TYPE
SYNTAX INTEGER {
static(1),
addressless(2),
dhcp(3),
ipcp(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines how this virtual interface is configured.
`static' and `addressless' indicate that all information
is provided by the SNMP manager, while `dhcp' and `ipcp'
indicate that some or all of the information is obtained
dynamically. `static' and `dhcp' interfaces connect to
multipoint networks, in which case the
mitelIpVGrpPortTableNetMask indicates the IP subnet on
that network. `addressless' and `ipcp' interfaces connect
to point-to-point networks, and in these cases the
mitelIpVGrpPortTableNetMask is set to
255.255.255.255 and the corresponding IP address is that
of the system at the other end of the link."
::= { mitelIpVGrpPortEntry 15 }
--
--
-- The IP Virtual Port RIP Table.
--
mitelIpVGrpRipTable OBJECT-TYPE
SYNTAX SEQUENCE OF MitelIpVGrpRipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains RIP statistics per IP virtual
interfaces."
::= { mitelIpGrpIpVirtualGroup 2 }
mitelIpVGrpRipEntry OBJECT-TYPE
SYNTAX MitelIpVGrpRipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table contains RIP statistics
specific to a single IP interface."
INDEX { mitelIpVGrpTableRipIpAddr }
::= { mitelIpVGrpRipTable 1 }
MitelIpVGrpRipEntry ::=
SEQUENCE {
mitelIpVGrpTableRipIpAddr
IpAddress,
mitelIpVGrpTableRipRxPkts
Counter32,
mitelIpVGrpTableRipRxBadPkts
Counter32,
mitelIpVGrpTableRipRxBadRtes
Counter32,
mitelIpVGrpTableRipTxUpdates
Counter32
}
mitelIpVGrpTableRipIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address that uniquely defines this entry"
::= { mitelIpVGrpRipEntry 1}
mitelIpVGrpTableRipRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RIP packets
regardless of RIP type received on this virtual port."
::= { mitelIpVGrpRipEntry 2 }
mitelIpVGrpTableRipRxBadPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of received packets
that contained incorrect header/packet definition
(ie: unsupported version(0), non-zero must be zero
fields)."
::= { mitelIpVGrpRipEntry 3 }
mitelIpVGrpTableRipRxBadRtes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of received packet
entries that contained bad route information (ie:
unsupported family(AF_INET), bad metric or a
bad network address."
::= { mitelIpVGrpRipEntry 4 }
mitelIpVGrpTableRipTxUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of updates sent on this interface."
::= { mitelIpVGrpRipEntry 5 }
END --MITEL-IPVIRTUAL-GROUP